OSDN Git Service
Luca Coelho [Tue, 25 Apr 2017 07:18:10 +0000 (10:18 +0300)]
iwlwifi: fix min API version for 7265D, 3168, 8000 and 8265
In a previous commit, we removed support for API versions earlier than
22 for these NICs. By mistake, the *_UCODE_API_MIN definitions were
set to 17. Fix that.
Fixes:
4b87e5af638b ("iwlwifi: remove support for fw older than -17 and -22")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Johannes Berg [Fri, 31 Mar 2017 08:47:35 +0000 (10:47 +0200)]
iwlwifi: mvm: clear new beacon command template struct
Clear the struct so that all reserved fields are zero when we
send the struct down to the device.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Luca Coelho [Thu, 30 Mar 2017 09:04:47 +0000 (12:04 +0300)]
iwlwifi: mvm: don't fail when removing a key from an inexisting sta
The iwl_mvm_remove_sta_key() function handles removing a key when the
sta doesn't exist anymore. Mistakenly, this was changed to return an
error while fixing another bug.
If the mvm_sta doesn't exist, we continue normally, but just don't try
to remove the igtk key.
Fixes:
cd4d23c1ea9b ("iwlwifi: mvm: Fix removal of IGTK")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Luca Coelho [Fri, 24 Mar 2017 09:01:45 +0000 (11:01 +0200)]
iwlwifi: pcie: only use d0i3 in suspend/resume if system_pm is set to d0i3
We only need to handle d0i3 entry and exit during suspend resume if
system_pm is set to IWL_PLAT_PM_MODE_D0I3, otherwise d0i3 entry
failures will cause suspend to fail.
This fixes https://bugzilla.kernel.org/show_bug.cgi?id=194791
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Emmanuel Grumbach [Wed, 29 Mar 2017 07:21:09 +0000 (10:21 +0300)]
iwlwifi: mvm: fix firmware debug restart recording
When we want to stop the recording of the firmware debug
and restart it later without reloading the firmware we
don't need to resend the configuration that comes with
host commands.
Sending those commands confused the hardware and led to
an NMI 0x66.
Change the flow as following:
* read the relevant registers (DBGC_IN_SAMPLE, DBGC_OUT_CTRL)
* clear those registers
* wait for the hardware to complete its write to the buffer
* get the data
* restore the value of those registers (to restart the
recording)
For early start (where the configuration is already
compiled in the firmware), we don't need to set those
registers after the firmware has been loaded, but only
when we want to restart the recording without having
restarted the firmware.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Johannes Berg [Wed, 22 Mar 2017 21:00:10 +0000 (22:00 +0100)]
iwlwifi: tt: move ucode_loaded check under mutex
The ucode_loaded check should be under the mutex, since it can
otherwise change state after we looked at it and before we got
the mutex. Fix that.
Fixes:
5c89e7bc557e ("iwlwifi: mvm: add registration to cooling device")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Liad Kaufman [Tue, 21 Mar 2017 15:13:16 +0000 (17:13 +0200)]
iwlwifi: mvm: support ibss in dqa mode
Allow working IBSS also when working in DQA mode.
This is done by setting it to treat the queues the
same as a BSS AP treats the queues.
Fixes:
7948b87308a4 ("iwlwifi: mvm: enable dynamic queue allocation mode")
Signed-off-by: Liad Kaufman <liad.kaufman@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Haim Dreyfuss [Thu, 16 Mar 2017 15:26:03 +0000 (17:26 +0200)]
iwlwifi: mvm: Fix command queue number on d0i3 flow
During d0i3 flow we flush all the queue except from the command queue.
Currently, in this flow the command queue is hard coded to 9.
In DQA the command queue number has changed from 9 to 0.
Fix that.
This fixes a problem in runtime PM resume flow.
Fixes:
097129c9e625 ("iwlwifi: mvm: move cmd queue to be #0 in dqa mode")
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Gregory Greenman [Mon, 6 Mar 2017 09:15:41 +0000 (11:15 +0200)]
iwlwifi: mvm: rs: start using LQ command color
Up until now, the driver was comparing the rate reported by the FW and
the rate of the latest LQ command to avoid processing data belonging
to the old LQ command. Recently, FW changed the meaning of the initial
rate field in tx response and it holds the actual rate (which is not
necessarily the initial rate of LQ's rate table). Use instead LQ cmd
color to be able to filter out tx responses/BA notifications which
where sent during earlier LQ commands' time frame.
This fixes some throughput degradation in noisy environments.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Xin Long [Fri, 19 May 2017 14:20:29 +0000 (22:20 +0800)]
bridge: start hello_timer when enabling KERNEL_STP in br_stp_start
Since commit
76b91c32dd86 ("bridge: stp: when using userspace stp stop
kernel hello and hold timers"), bridge would not start hello_timer if
stp_enabled is not KERNEL_STP when br_dev_open.
The problem is even if users set stp_enabled with KERNEL_STP later,
the timer will still not be started. It causes that KERNEL_STP can
not really work. Users have to re-ifup the bridge to avoid this.
This patch is to fix it by starting br->hello_timer when enabling
KERNEL_STP in br_stp_start.
As an improvement, it's also to start hello_timer again only when
br->stp_enabled is KERNEL_STP in br_hello_timer_expired, there is
no reason to start the timer again when it's NO_STP.
Fixes:
76b91c32dd86 ("bridge: stp: when using userspace stp stop kernel hello and hold timers")
Reported-by: Haidong Li <haili@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Ivan Vecera <cera@cera.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nisar Sayed [Fri, 19 May 2017 14:00:25 +0000 (14:00 +0000)]
smsc95xx: Support only IPv4 TCP/UDP csum offload
When TX checksum offload is used, if the computed checksum is 0 the
LAN95xx device do not alter the checksum to 0xffff. In the case of ipv4
UDP checksum, it indicates to receiver that no checksum is calculated.
Under ipv6, UDP checksum yields a result of zero must be changed to
0xffff. Hence disabling checksum offload for ipv6 packets.
Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com>
Reported-by: popcorn mix <popcornmix@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 21 May 2017 17:26:46 +0000 (13:26 -0400)]
Merge branch 'arp-always-override-existing-neigh-entries-with-gratuitous-ARP'
Ihar Hrachyshka says:
====================
arp: always override existing neigh entries with gratuitous ARP
This patchset is spurred by discussion started at
https://patchwork.ozlabs.org/patch/760372/ where we figured that there is no
real reason for enforcing override by gratuitous ARP packets only when
arp_accept is 1. Same should happen when it's 0 (the default value).
changelog v2: handled review comments by Julian Anastasov
- fixed a mistake in a comment;
- postponed addr_type calculation to as late as possible.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ihar Hrachyshka [Thu, 18 May 2017 19:41:21 +0000 (12:41 -0700)]
arp: always override existing neigh entries with gratuitous ARP
Currently, when arp_accept is 1, we always override existing neigh
entries with incoming gratuitous ARP replies. Otherwise, we override
them only if new replies satisfy _locktime_ conditional (packets arrive
not earlier than _locktime_ seconds since the last update to the neigh
entry).
The idea behind locktime is to pick the very first (=> close) reply
received in a unicast burst when ARP proxies are used. This helps to
avoid ARP thrashing where Linux would switch back and forth from one
proxy to another.
This logic has nothing to do with gratuitous ARP replies that are
generally not aligned in time when multiple IP address carriers send
them into network.
This patch enforces overriding of existing neigh entries by all incoming
gratuitous ARP packets, irrespective of their time of arrival. This will
make the kernel honour all incoming gratuitous ARP packets.
Signed-off-by: Ihar Hrachyshka <ihrachys@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ihar Hrachyshka [Thu, 18 May 2017 19:41:20 +0000 (12:41 -0700)]
arp: postpone addr_type calculation to as late as possible
The addr_type retrieval can be costly, so it's worth trying to avoid its
calculation as much as possible. This patch makes it calculated only
for gratuitous ARP packets. This is especially important since later we
may want to move is_garp calculation outside of arp_accept block, at
which point the costly operation will be executed for all setups.
The patch is the result of a discussion in net-dev:
http://marc.info/?l=linux-netdev&m=
149506354216994
Suggested-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Ihar Hrachyshka <ihrachys@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ihar Hrachyshka [Thu, 18 May 2017 19:41:19 +0000 (12:41 -0700)]
arp: decompose is_garp logic into a separate function
The code is quite involving already to earn a separate function for
itself. If anything, it helps arp_process readability.
Signed-off-by: Ihar Hrachyshka <ihrachys@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ihar Hrachyshka [Thu, 18 May 2017 19:41:18 +0000 (12:41 -0700)]
arp: fixed error in a comment
the is_garp code deals just with gratuitous ARP packets, not every
unsolicited packet.
This patch is a result of a discussion in netdev:
http://marc.info/?l=linux-netdev&m=
149506354216994
Suggested-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Ihar Hrachyshka <ihrachys@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Wang [Thu, 18 May 2017 18:22:33 +0000 (11:22 -0700)]
tcp: initialize rcv_mss to TCP_MIN_MSS instead of 0
When tcp_disconnect() is called, inet_csk_delack_init() sets
icsk->icsk_ack.rcv_mss to 0.
This could potentially cause tcp_recvmsg() => tcp_cleanup_rbuf() =>
__tcp_select_window() call path to have division by 0 issue.
So this patch initializes rcv_mss to TCP_MIN_MSS instead of 0.
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 21 May 2017 17:00:02 +0000 (13:00 -0400)]
Merge git://git./pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains Netfilter/IPVS fixes for your net tree,
they are:
1) When using IPVS in direct-routing mode, normal traffic from the LVS
host to a back-end server is sometimes incorrectly NATed on the way
back into the LVS host. Patch to fix this from Julian Anastasov.
2) Calm down clang compilation warning in ctnetlink due to type
mismatch, from Matthias Kaehlcke.
3) Do not re-setup NAT for conntracks that are already confirmed, this
is fixing a problem that was introduced in the previous nf-next batch.
Patch from Liping Zhang.
4) Do not allow conntrack helper removal from userspace cthelper
infrastructure if already in used. This comes with an initial patch
to introduce nf_conntrack_helper_put() that is required by this fix.
From Liping Zhang.
5) Zero the pad when copying data to userspace, otherwise iptables fails
to remove rules. This is a follow up on the patchset that sorts out
the internal match/target structure pointer leak to userspace. Patch
from the same author, Willem de Bruijn. This also comes with a build
failure when CONFIG_COMPAT is not on, coming in the last patch of
this series.
6) SYNPROXY crashes with conntrack entries that are created via
ctnetlink, more specifically via conntrackd state sync. Patch from
Eric Leblond.
7) RCU safe iteration on set element dumping in nf_tables, from
Liping Zhang.
8) Missing sanitization of immediate date for the bitwise and cmp
expressions in nf_tables.
9) Refcounting logic for chain and objects from set elements does not
integrate into the nf_tables 2-phase commit protocol.
10) Missing sanitization of target verdict in ebtables arpreply target,
from Gao Feng.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 18 May 2017 19:04:41 +0000 (12:04 -0700)]
Merge tag 'md/4.12-rc2' of git://git./linux/kernel/git/shli/md
Pull MD fixes from Shaohua Li:
- Several bug fixes for raid5-cache from Song Liu, mainly handle
journal disk error
- Fix bad block handling in choosing raid1 disk from Tomasz Majchrzak
- Simplify external metadata array sysfs handling from Artur
Paszkiewicz
- Optimize raid0 discard handling from me, now raid0 will dispatch
large discard IO directly to underlayer disks.
* tag 'md/4.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
raid1: prefer disk without bad blocks
md/r5cache: handle sync with data in write back cache
md/r5cache: gracefully handle journal device errors for writeback mode
md/raid1/10: avoid unnecessary locking
md/raid5-cache: in r5l_do_submit_io(), submit io->split_bio first
md/md0: optimize raid0 discard handling
md: don't return -EAGAIN in md_allow_write for external metadata arrays
md/raid5: make use of spin_lock_irq over local_irq_disable + spin_lock
Linus Torvalds [Thu, 18 May 2017 18:40:21 +0000 (11:40 -0700)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Don't allow negative TCP reordering values, from Soheil Hassas
Yeganeh.
2) Don't overflow while parsing ipv6 header options, from Craig Gallek.
3) Handle more cleanly the case where an individual route entry during
a dump will not fit into the allocated netlink SKB, from David
Ahern.
4) Add missing CONFIG_INET dependency for mlx5e, from Arnd Bergmann.
5) Allow neighbour updates to converge more quickly via gratuitous
ARPs, from Ihar Hrachyshka.
6) Fix compile error from CONFIG_INET is disabled, from Eric Dumazet.
7) Fix use after free in x25 protocol init, from Lin Zhang.
8) Valid VLAN pvid ranges passed into br_validate(), from Tobias
Jungel.
9) NULL out address lists in child sockets in SCTP, this is similar to
the fix we made for inet connection sockets last week. From Eric
Dumazet.
10) Fix NULL deref in mlxsw driver, from Ido Schimmel.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits)
mlxsw: spectrum: Avoid possible NULL pointer dereference
sh_eth: Do not print an error message for probe deferral
sh_eth: Use platform device for printing before register_netdev()
mlxsw: spectrum_router: Fix rif counter freeing routine
mlxsw: spectrum_dpipe: Fix incorrect entry index
cxgb4: update latest firmware version supported
qmi_wwan: add another Lenovo EM74xx device ID
sctp: do not inherit ipv6_{mc|ac|fl}_list from parent
udp: make *udp*_queue_rcv_skb() functions static
bridge: netlink: check vlan_default_pvid range
net: ethernet: faraday: To support device tree usage.
net: x25: fix one potential use-after-free issue
bpf: adjust verifier heuristics
ipv6: Check ip6_find_1stfragopt() return value properly.
selftests/bpf: fix broken build due to types.h
bnxt_en: Check status of firmware DCBX agent before setting DCB_CAP_DCBX_HOST.
bnxt_en: Call bnxt_dcb_init() after getting firmware DCBX configuration.
net: fix compile error in skb_orphan_partial()
ipv6: Prevent overrun when parsing v6 header options
neighbour: update neigh timestamps iff update is effective
...
Linus Torvalds [Thu, 18 May 2017 18:21:10 +0000 (11:21 -0700)]
Merge git://git./linux/kernel/git/davem/sparc
Pull sparc fixes from David Miller:
"Three sparc bug fixes"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc/ftrace: Fix ftrace graph time measurement
sparc: Fix -Wstringop-overflow warning
sparc64: Fix mapping of 64k pages with MAP_FIXED
Linus Torvalds [Thu, 18 May 2017 18:17:34 +0000 (11:17 -0700)]
Merge tag 'kbuild-fixes-v4.12' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fix from Masahiro Yamada:
"Fix headers_install to not delete pre-existing headers in the install
destination"
* tag 'kbuild-fixes-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: skip install/check of headers right under uapi directories
Linus Torvalds [Thu, 18 May 2017 17:04:42 +0000 (10:04 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ebiederm/user-namespace
Pull pid namespace fixes from Eric Biederman:
"These are two bugs that turn out to have simple fixes that were
reported during the merge window. Both of these issues have existed
for a while and it just happens that they both were reported at almost
the same time"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
pid_ns: Fix race between setns'ed fork() and zap_pid_ns_processes()
pid_ns: Sleep in TASK_INTERRUPTIBLE in zap_pid_ns_processes
Linus Torvalds [Thu, 18 May 2017 16:38:09 +0000 (09:38 -0700)]
Merge tag 'hwmon-for-linus-v4.12-rc2' of git://git./linux/kernel/git/groeck/linux-staging
Pull hwmon fix from Guenter Roeck:
"Fix problem with hotplug state machine in coretemp driver"
* tag 'hwmon-for-linus-v4.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (coretemp) Handle frozen hotplug state correctly
Ido Schimmel [Thu, 18 May 2017 11:03:52 +0000 (13:03 +0200)]
mlxsw: spectrum: Avoid possible NULL pointer dereference
In case we got an FDB notification for a port that doesn't exist we
execute an FDB entry delete to prevent it from re-appearing the next
time we poll for notifications.
If the operation failed we would trigger a NULL pointer dereference as
'mlxsw_sp_port' is NULL.
Fix it by reporting the error using the underlying bus device instead.
Fixes:
12f1501e7511 ("mlxsw: spectrum: remove FDB entry in case we get unknown object notification")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geert Uytterhoeven [Thu, 18 May 2017 13:01:35 +0000 (15:01 +0200)]
sh_eth: Do not print an error message for probe deferral
EPROBE_DEFER is not an error, hence printing an error message like
sh-eth
ee700000.ethernet: failed to initialise MDIO
may confuse the user.
To fix this, suppress the error message in case of probe deferral.
While at it, shorten the message, and add the actual error code.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geert Uytterhoeven [Thu, 18 May 2017 13:01:34 +0000 (15:01 +0200)]
sh_eth: Use platform device for printing before register_netdev()
The MDIO initialization failure message is printed using the network
device, before it has been registered, leading to:
(null): failed to initialise MDIO
Use the platform device instead to fix this:
sh-eth
ee700000.ethernet: failed to initialise MDIO
Fixes:
daacf03f0bbfefee ("sh_eth: Register MDIO bus before registering the network device")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 18 May 2017 15:04:00 +0000 (11:04 -0400)]
Merge branch 'mlxsw-fixes'
Jiri Pirko says:
====================
mlxsw: couple of fixes
Couple of fixes from Arkadi
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Arkadi Sharshevsky [Thu, 18 May 2017 07:18:53 +0000 (09:18 +0200)]
mlxsw: spectrum_router: Fix rif counter freeing routine
During rif counter freeing the counter index can be invalid. Add check
of validity before freeing the counter.
Fixes:
e0c0afd8aa4e ("mlxsw: spectrum: Support for counters on router interfaces")
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arkadi Sharshevsky [Thu, 18 May 2017 07:18:52 +0000 (09:18 +0200)]
mlxsw: spectrum_dpipe: Fix incorrect entry index
In case of disabled counters the entry index will be incorrect. Fix this
by moving the entry index set before the counter status check.
Fixes:
2ba5999f009d ("mlxsw: spectrum: Add Support for erif table entries access")
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ganesh Goudar [Wed, 17 May 2017 18:38:16 +0000 (00:08 +0530)]
cxgb4: update latest firmware version supported
Change t4fw_version.h to update latest firmware version
number to 1.16.43.0.
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bjørn Mork [Wed, 17 May 2017 14:31:41 +0000 (16:31 +0200)]
qmi_wwan: add another Lenovo EM74xx device ID
In their infinite wisdom, and never ending quest for end user frustration,
Lenovo has decided to use a new USB device ID for the wwan modules in
their 2017 laptops. The actual hardware is still the Sierra Wireless
EM7455 or EM7430, depending on region.
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 17 May 2017 14:16:40 +0000 (07:16 -0700)]
sctp: do not inherit ipv6_{mc|ac|fl}_list from parent
SCTP needs fixes similar to
83eaddab4378 ("ipv6/dccp: do not inherit
ipv6_mc_list from parent"), otherwise bad things can happen.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Wed, 17 May 2017 12:52:16 +0000 (14:52 +0200)]
udp: make *udp*_queue_rcv_skb() functions static
Since the udp memory accounting refactor, we don't need any more
to export the *udp*_queue_rcv_skb(). Make them static and fix
a couple of sparse warnings:
net/ipv4/udp.c:1615:5: warning: symbol 'udp_queue_rcv_skb' was not
declared. Should it be static?
net/ipv6/udp.c:572:5: warning: symbol 'udpv6_queue_rcv_skb' was not
declared. Should it be static?
Fixes:
850cbaddb52d ("udp: use it's own memory accounting schema")
Fixes:
c915fe13cbaa ("udplite: fix NULL pointer dereference")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Jungel [Wed, 17 May 2017 07:29:12 +0000 (09:29 +0200)]
bridge: netlink: check vlan_default_pvid range
Currently it is allowed to set the default pvid of a bridge to a value
above VLAN_VID_MASK (0xfff). This patch adds a check to br_validate and
returns -EINVAL in case the pvid is out of bounds.
Reproduce by calling:
[root@test ~]# ip l a type bridge
[root@test ~]# ip l a type dummy
[root@test ~]# ip l s bridge0 type bridge vlan_filtering 1
[root@test ~]# ip l s bridge0 type bridge vlan_default_pvid 9999
[root@test ~]# ip l s dummy0 master bridge0
[root@test ~]# bridge vlan
port vlan ids
bridge0 9999 PVID Egress Untagged
dummy0 9999 PVID Egress Untagged
Fixes:
0f963b7592ef ("bridge: netlink: add support for default_pvid")
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Tobias Jungel <tobias.jungel@bisdn.de>
Acked-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Greentime Hu [Wed, 17 May 2017 07:28:19 +0000 (15:28 +0800)]
net: ethernet: faraday: To support device tree usage.
To support device tree usage for ftmac100.
Signed-off-by: Greentime Hu <green.hu@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
linzhang [Wed, 17 May 2017 04:05:07 +0000 (12:05 +0800)]
net: x25: fix one potential use-after-free issue
The function x25_init is not properly unregister related resources
on error handler.It is will result in kernel oops if x25_init init
failed, so add properly unregister call on error handler.
Also, i adjust the coding style and make x25_register_sysctl properly
return failure.
Signed-off-by: linzhang <xiaolou4617@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Wed, 17 May 2017 15:24:47 +0000 (11:24 -0400)]
netfilter: xtables: fix build failure from COMPAT_XT_ALIGN outside CONFIG_COMPAT
The patch in the Fixes references COMPAT_XT_ALIGN in the definition
of XT_DATA_TO_USER, outside an #ifdef CONFIG_COMPAT block.
Split XT_DATA_TO_USER into separate compat and non compat variants and
define the first inside an CONFIG_COMPAT block.
This simplifies both variants by removing branches inside the macro.
Fixes:
324318f0248c ("netfilter: xtables: zero padding in data_to_user")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Daniel Borkmann [Thu, 18 May 2017 01:00:06 +0000 (03:00 +0200)]
bpf: adjust verifier heuristics
Current limits with regards to processing program paths do not
really reflect today's needs anymore due to programs becoming
more complex and verifier smarter, keeping track of more data
such as const ALU operations, alignment tracking, spilling of
PTR_TO_MAP_VALUE_ADJ registers, and other features allowing for
smarter matching of what LLVM generates.
This also comes with the side-effect that we result in fewer
opportunities to prune search states and thus often need to do
more work to prove safety than in the past due to different
register states and stack layout where we mismatch. Generally,
it's quite hard to determine what caused a sudden increase in
complexity, it could be caused by something as trivial as a
single branch somewhere at the beginning of the program where
LLVM assigned a stack slot that is marked differently throughout
other branches and thus causing a mismatch, where verifier
then needs to prove safety for the whole rest of the program.
Subsequently, programs with even less than half the insn size
limit can get rejected. We noticed that while some programs
load fine under pre 4.11, they get rejected due to hitting
limits on more recent kernels. We saw that in the vast majority
of cases (90+%) pruning failed due to register mismatches. In
case of stack mismatches, majority of cases failed due to
different stack slot types (invalid, spill, misc) rather than
differences in spilled registers.
This patch makes pruning more aggressive by also adding markers
that sit at conditional jumps as well. Currently, we only mark
jump targets for pruning. For example in direct packet access,
these are usually error paths where we bail out. We found that
adding these markers, it can reduce number of processed insns
by up to 30%. Another option is to ignore reg->id in probing
PTR_TO_MAP_VALUE_OR_NULL registers, which can help pruning
slightly as well by up to 7% observed complexity reduction as
stand-alone. Meaning, if a previous path with register type
PTR_TO_MAP_VALUE_OR_NULL for map X was found to be safe, then
in the current state a PTR_TO_MAP_VALUE_OR_NULL register for
the same map X must be safe as well. Last but not least the
patch also adds a scheduling point and bumps the current limit
for instructions to be processed to a more adequate value.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 18 May 2017 02:54:11 +0000 (22:54 -0400)]
ipv6: Check ip6_find_1stfragopt() return value properly.
Do not use unsigned variables to see if it returns a negative
error or not.
Fixes:
2423496af35d ("ipv6: Prevent overrun when parsing v6 header options")
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yonghong Song [Wed, 17 May 2017 22:18:05 +0000 (15:18 -0700)]
selftests/bpf: fix broken build due to types.h
Commit
0a5539f66133 ("bpf: Provide a linux/types.h override
for bpf selftests.") caused a build failure for tools/testing/selftest/bpf
because of some missing types:
$ make -C tools/testing/selftests/bpf/
...
In file included from /home/yhs/work/net-next/tools/testing/selftests/bpf/test_pkt_access.c:8:
../../../include/uapi/linux/bpf.h:170:3: error: unknown type name '__aligned_u64'
__aligned_u64 key;
...
/usr/include/linux/swab.h:160:8: error: unknown type name '__always_inline'
static __always_inline __u16 __swab16p(const __u16 *p)
...
The type __aligned_u64 is defined in linux:include/uapi/linux/types.h.
The fix is to copy missing type definition into
tools/testing/selftests/bpf/include/uapi/linux/types.h.
Adding additional include "string.h" resolves __always_inline issue.
Fixes:
0a5539f66133 ("bpf: Provide a linux/types.h override for bpf selftests.")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Wed, 17 May 2017 21:21:15 +0000 (14:21 -0700)]
Merge tag 'for-4.12/dm-fixes-2' of git://git./linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- a couple DM thin provisioning fixes
- a few request-based DM and DM multipath fixes for issues that were
made when merging Christoph's changes with Bart's changes for 4.12
- a DM bufio unsigned overflow fix
- a couple pure fixes for the DM cache target.
- various very small tweaks to the DM cache target that enable
considerable speed improvements in the face of continuous IO. Given
that the cache target was significantly reworked for 4.12 I see no
reason to sit on these advances until 4.13 considering the favorable
results associated with such minimalist tweaks.
* tag 'for-4.12/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm cache: handle kmalloc failure allocating background_tracker struct
dm bufio: make the parameter "retain_bytes" unsigned long
dm mpath: multipath_clone_and_map must not return -EIO
dm mpath: don't return -EIO from dm_report_EIO
dm rq: add a missing break to map_request
dm space map disk: fix some book keeping in the disk space map
dm thin metadata: call precommit before saving the roots
dm cache policy smq: don't do any writebacks unless IDLE
dm cache: simplify the IDLE vs BUSY state calculation
dm cache: track all IO to the cache rather than just the origin device's IO
dm cache policy smq: stop preemptively demoting blocks
dm cache policy smq: put newly promoted entries at the top of the multiqueue
dm cache policy smq: be more aggressive about triggering a writeback
dm cache policy smq: only demote entries in bottom half of the clean multiqueue
dm cache: fix incorrect 'idle_time' reset in IO tracker
Linus Torvalds [Wed, 17 May 2017 21:13:44 +0000 (14:13 -0700)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Here are some bugfixes from I2C, especially removing a wrongly
displayed error message for all i2c muxes"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: xgene: Set ACPI_COMPANION_I2C
i2c: mv64xxx: don't override deferred probing when getting irq
i2c: mux: only print failure message on error
i2c: mux: reg: rename label to indicate what it does
i2c: mux: reg: put away the parent i2c adapter on probe failure
David S. Miller [Wed, 17 May 2017 19:12:50 +0000 (15:12 -0400)]
Merge branch 'bnxt_en-DCBX-fixes'
Michael Chan says:
====================
bnxt_en: DCBX fixes.
2 bug fixes for the case where the NIC's firmware DCBX agent is enabled.
With these fixes, we will return the proper information to lldpad.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Tue, 16 May 2017 20:39:44 +0000 (16:39 -0400)]
bnxt_en: Check status of firmware DCBX agent before setting DCB_CAP_DCBX_HOST.
Otherwise, all the host based DCBX settings from lldpad will fail if the
firmware DCBX agent is running.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Tue, 16 May 2017 20:39:43 +0000 (16:39 -0400)]
bnxt_en: Call bnxt_dcb_init() after getting firmware DCBX configuration.
In the current code, bnxt_dcb_init() is called too early before we
determine if the firmware DCBX agent is running or not. As a result,
we are not setting the DCB_CAP_DCBX_HOST and DCB_CAP_DCBX_LLD_MANAGED
flags properly to report to DCBNL.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 16 May 2017 20:27:53 +0000 (13:27 -0700)]
net: fix compile error in skb_orphan_partial()
If CONFIG_INET is not set, net/core/sock.c can not compile :
net/core/sock.c: In function ‘skb_orphan_partial’:
net/core/sock.c:1810:2: error: implicit declaration of function
‘skb_is_tcp_pure_ack’ [-Werror=implicit-function-declaration]
if (skb_is_tcp_pure_ack(skb))
^
Fix this by always including <net/tcp.h>
Fixes:
f6ba8d33cfbb ("netem: fix skb_orphan_partial()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Liam R. Howlett [Wed, 17 May 2017 15:47:00 +0000 (11:47 -0400)]
sparc/ftrace: Fix ftrace graph time measurement
The ftrace function_graph time measurements of a given function is not
accurate according to those recorded by ftrace using the function
filters. This change pulls the x86_64 fix from 'commit
722b3c746953
("ftrace/graph: Trace function entry before updating index")' into the
sparc specific prepare_ftrace_return which stops ftrace from
counting interrupted tasks in the time measurement.
Example measurements for select_task_rq_fair running "hackbench 100
process 1000":
| tracing/trace_stat/function0 | function_graph
Before patch | 2.802 us | 4.255 us
After patch | 2.749 us | 3.094 us
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Orlando Arias [Tue, 16 May 2017 19:34:00 +0000 (15:34 -0400)]
sparc: Fix -Wstringop-overflow warning
Greetings,
GCC 7 introduced the -Wstringop-overflow flag to detect buffer overflows
in calls to string handling functions [1][2]. Due to the way
``empty_zero_page'' is declared in arch/sparc/include/setup.h, this
causes a warning to trigger at compile time in the function mem_init(),
which is subsequently converted to an error. The ensuing patch fixes
this issue and aligns the declaration of empty_zero_page to that of
other architectures. Thank you.
Cheers,
Orlando.
[1] https://gcc.gnu.org/ml/gcc-patches/2016-10/msg02308.html
[2] https://gcc.gnu.org/gcc-7/changes.html
Signed-off-by: Orlando Arias <oarias@knights.ucf.edu>
--------------------------------------------------------------------------------
Signed-off-by: David S. Miller <davem@davemloft.net>
Nitin Gupta [Mon, 15 May 2017 23:28:17 +0000 (16:28 -0700)]
sparc64: Fix mapping of 64k pages with MAP_FIXED
An incorrect huge page alignment check caused
mmap failure for 64K pages when MAP_FIXED is used
with address not aligned to HPAGE_SIZE.
Orabug:
25885991
Fixes:
dcd1912d21a0 ("sparc64: Add 64K page size support")
Signed-off-by: Nitin Gupta <nitin.m.gupta@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Craig Gallek [Tue, 16 May 2017 18:36:23 +0000 (14:36 -0400)]
ipv6: Prevent overrun when parsing v6 header options
The KASAN warning repoted below was discovered with a syzkaller
program. The reproducer is basically:
int s = socket(AF_INET6, SOCK_RAW, NEXTHDR_HOP);
send(s, &one_byte_of_data, 1, MSG_MORE);
send(s, &more_than_mtu_bytes_data, 2000, 0);
The socket() call sets the nexthdr field of the v6 header to
NEXTHDR_HOP, the first send call primes the payload with a non zero
byte of data, and the second send call triggers the fragmentation path.
The fragmentation code tries to parse the header options in order
to figure out where to insert the fragment option. Since nexthdr points
to an invalid option, the calculation of the size of the network header
can made to be much larger than the linear section of the skb and data
is read outside of it.
This fix makes ip6_find_1stfrag return an error if it detects
running out-of-bounds.
[ 42.361487] ==================================================================
[ 42.364412] BUG: KASAN: slab-out-of-bounds in ip6_fragment+0x11c8/0x3730
[ 42.365471] Read of size 840 at addr
ffff88000969e798 by task ip6_fragment-oo/3789
[ 42.366469]
[ 42.366696] CPU: 1 PID: 3789 Comm: ip6_fragment-oo Not tainted 4.11.0+ #41
[ 42.367628] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.1-1ubuntu1 04/01/2014
[ 42.368824] Call Trace:
[ 42.369183] dump_stack+0xb3/0x10b
[ 42.369664] print_address_description+0x73/0x290
[ 42.370325] kasan_report+0x252/0x370
[ 42.370839] ? ip6_fragment+0x11c8/0x3730
[ 42.371396] check_memory_region+0x13c/0x1a0
[ 42.371978] memcpy+0x23/0x50
[ 42.372395] ip6_fragment+0x11c8/0x3730
[ 42.372920] ? nf_ct_expect_unregister_notifier+0x110/0x110
[ 42.373681] ? ip6_copy_metadata+0x7f0/0x7f0
[ 42.374263] ? ip6_forward+0x2e30/0x2e30
[ 42.374803] ip6_finish_output+0x584/0x990
[ 42.375350] ip6_output+0x1b7/0x690
[ 42.375836] ? ip6_finish_output+0x990/0x990
[ 42.376411] ? ip6_fragment+0x3730/0x3730
[ 42.376968] ip6_local_out+0x95/0x160
[ 42.377471] ip6_send_skb+0xa1/0x330
[ 42.377969] ip6_push_pending_frames+0xb3/0xe0
[ 42.378589] rawv6_sendmsg+0x2051/0x2db0
[ 42.379129] ? rawv6_bind+0x8b0/0x8b0
[ 42.379633] ? _copy_from_user+0x84/0xe0
[ 42.380193] ? debug_check_no_locks_freed+0x290/0x290
[ 42.380878] ? ___sys_sendmsg+0x162/0x930
[ 42.381427] ? rcu_read_lock_sched_held+0xa3/0x120
[ 42.382074] ? sock_has_perm+0x1f6/0x290
[ 42.382614] ? ___sys_sendmsg+0x167/0x930
[ 42.383173] ? lock_downgrade+0x660/0x660
[ 42.383727] inet_sendmsg+0x123/0x500
[ 42.384226] ? inet_sendmsg+0x123/0x500
[ 42.384748] ? inet_recvmsg+0x540/0x540
[ 42.385263] sock_sendmsg+0xca/0x110
[ 42.385758] SYSC_sendto+0x217/0x380
[ 42.386249] ? SYSC_connect+0x310/0x310
[ 42.386783] ? __might_fault+0x110/0x1d0
[ 42.387324] ? lock_downgrade+0x660/0x660
[ 42.387880] ? __fget_light+0xa1/0x1f0
[ 42.388403] ? __fdget+0x18/0x20
[ 42.388851] ? sock_common_setsockopt+0x95/0xd0
[ 42.389472] ? SyS_setsockopt+0x17f/0x260
[ 42.390021] ? entry_SYSCALL_64_fastpath+0x5/0xbe
[ 42.390650] SyS_sendto+0x40/0x50
[ 42.391103] entry_SYSCALL_64_fastpath+0x1f/0xbe
[ 42.391731] RIP: 0033:0x7fbbb711e383
[ 42.392217] RSP: 002b:
00007ffff4d34f28 EFLAGS:
00000246 ORIG_RAX:
000000000000002c
[ 42.393235] RAX:
ffffffffffffffda RBX:
0000000000000000 RCX:
00007fbbb711e383
[ 42.394195] RDX:
0000000000001000 RSI:
00007ffff4d34f60 RDI:
0000000000000003
[ 42.395145] RBP:
0000000000000046 R08:
00007ffff4d34f40 R09:
0000000000000018
[ 42.396056] R10:
0000000000000000 R11:
0000000000000246 R12:
0000000000400aad
[ 42.396598] R13:
0000000000000066 R14:
00007ffff4d34ee0 R15:
00007fbbb717af00
[ 42.397257]
[ 42.397411] Allocated by task 3789:
[ 42.397702] save_stack_trace+0x16/0x20
[ 42.398005] save_stack+0x46/0xd0
[ 42.398267] kasan_kmalloc+0xad/0xe0
[ 42.398548] kasan_slab_alloc+0x12/0x20
[ 42.398848] __kmalloc_node_track_caller+0xcb/0x380
[ 42.399224] __kmalloc_reserve.isra.32+0x41/0xe0
[ 42.399654] __alloc_skb+0xf8/0x580
[ 42.400003] sock_wmalloc+0xab/0xf0
[ 42.400346] __ip6_append_data.isra.41+0x2472/0x33d0
[ 42.400813] ip6_append_data+0x1a8/0x2f0
[ 42.401122] rawv6_sendmsg+0x11ee/0x2db0
[ 42.401505] inet_sendmsg+0x123/0x500
[ 42.401860] sock_sendmsg+0xca/0x110
[ 42.402209] ___sys_sendmsg+0x7cb/0x930
[ 42.402582] __sys_sendmsg+0xd9/0x190
[ 42.402941] SyS_sendmsg+0x2d/0x50
[ 42.403273] entry_SYSCALL_64_fastpath+0x1f/0xbe
[ 42.403718]
[ 42.403871] Freed by task 1794:
[ 42.404146] save_stack_trace+0x16/0x20
[ 42.404515] save_stack+0x46/0xd0
[ 42.404827] kasan_slab_free+0x72/0xc0
[ 42.405167] kfree+0xe8/0x2b0
[ 42.405462] skb_free_head+0x74/0xb0
[ 42.405806] skb_release_data+0x30e/0x3a0
[ 42.406198] skb_release_all+0x4a/0x60
[ 42.406563] consume_skb+0x113/0x2e0
[ 42.406910] skb_free_datagram+0x1a/0xe0
[ 42.407288] netlink_recvmsg+0x60d/0xe40
[ 42.407667] sock_recvmsg+0xd7/0x110
[ 42.408022] ___sys_recvmsg+0x25c/0x580
[ 42.408395] __sys_recvmsg+0xd6/0x190
[ 42.408753] SyS_recvmsg+0x2d/0x50
[ 42.409086] entry_SYSCALL_64_fastpath+0x1f/0xbe
[ 42.409513]
[ 42.409665] The buggy address belongs to the object at
ffff88000969e780
[ 42.409665] which belongs to the cache kmalloc-512 of size 512
[ 42.410846] The buggy address is located 24 bytes inside of
[ 42.410846] 512-byte region [
ffff88000969e780,
ffff88000969e980)
[ 42.411941] The buggy address belongs to the page:
[ 42.412405] page:
ffffea000025a780 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0
[ 42.413298] flags: 0x100000000008100(slab|head)
[ 42.413729] raw:
0100000000008100 0000000000000000 0000000000000000 00000001800c000c
[ 42.414387] raw:
ffffea00002a9500 0000000900000007 ffff88000c401280 0000000000000000
[ 42.415074] page dumped because: kasan: bad access detected
[ 42.415604]
[ 42.415757] Memory state around the buggy address:
[ 42.416222]
ffff88000969e880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 42.416904]
ffff88000969e900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 42.417591] >
ffff88000969e980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 42.418273] ^
[ 42.418588]
ffff88000969ea00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 42.419273]
ffff88000969ea80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 42.419882] ==================================================================
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Craig Gallek <kraig@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Masahiro Yamada [Tue, 16 May 2017 05:15:03 +0000 (14:15 +0900)]
kbuild: skip install/check of headers right under uapi directories
Since commit
61562f981e92 ("uapi: export all arch specifics
directories"), "make INSTALL_HDR_PATH=$root/usr headers_install"
deletes standard glibc headers and others in $(root)/usr/include.
The cause of the issue is that headers_install now starts descending
from arch/$(hdr-arch)/include/uapi with $(root)/usr/include for its
destination when installing asm headers. So, headers already there
are assumed to be unwanted.
When headers_install starts descending from include/uapi with
$(root)/usr/include for its destination, it works around the problem
by creating an dummy destination $(root)/usr/include/uapi, but this
is tricky.
To fix the problem in a clean way is to skip headers install/check
in include/uapi and arch/$(hdr-arch)/include/uapi because we know
there are only sub-directories in uapi directories. A good side
effect is the empty destination $(root)/usr/include/uapi will go
away.
I am also removing the trailing slash in the headers_check target to
skip checking in arch/$(hdr-arch)/include/uapi.
Fixes:
61562f981e92 ("uapi: export all arch specifics directories")
Reported-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Ihar Hrachyshka [Tue, 16 May 2017 15:44:24 +0000 (08:44 -0700)]
neighbour: update neigh timestamps iff update is effective
It's a common practice to send gratuitous ARPs after moving an
IP address to another device to speed up healing of a service. To
fulfill service availability constraints, the timing of network peers
updating their caches to point to a new location of an IP address can be
particularly important.
Sometimes neigh_update calls won't touch neither lladdr nor state, for
example if an update arrives in locktime interval. The neigh->updated
value is tested by the protocol specific neigh code, which in turn
will influence whether NEIGH_UPDATE_F_OVERRIDE gets set in the
call to neigh_update() or not. As a result, we may effectively ignore
the update request, bailing out of touching the neigh entry, except that
we still bump its timestamps inside neigh_update.
This may be a problem for updates arriving in quick succession. For
example, consider the following scenario:
A service is moved to another device with its IP address. The new device
sends three gratuitous ARP requests into the network with ~1 seconds
interval between them. Just before the first request arrives to one of
network peer nodes, its neigh entry for the IP address transitions from
STALE to DELAY. This transition, among other things, updates
neigh->updated. Once the kernel receives the first gratuitous ARP, it
ignores it because its arrival time is inside the locktime interval. The
kernel still bumps neigh->updated. Then the second gratuitous ARP
request arrives, and it's also ignored because it's still in the (new)
locktime interval. Same happens for the third request. The node
eventually heals itself (after delay_first_probe_time seconds since the
initial transition to DELAY state), but it just wasted some time and
require a new ARP request/reply round trip. This unfortunate behaviour
both puts more load on the network, as well as reduces service
availability.
This patch changes neigh_update so that it bumps neigh->updated (as well
as neigh->confirmed) only once we are sure that either lladdr or entry
state will change). In the scenario described above, it means that the
second gratuitous ARP request will actually update the entry lladdr.
Ideally, we would update the neigh entry on the very first gratuitous
ARP request. The locktime mechanism is designed to ignore ARP updates in
a short timeframe after a previous ARP update was honoured by the kernel
layer. This would require tracking timestamps for state transitions
separately from timestamps when actual updates are received. This would
probably involve changes in neighbour struct. Therefore, the patch
doesn't tackle the issue of the first gratuitous APR ignored, leaving
it for a follow-up.
Signed-off-by: Ihar Hrachyshka <ihrachys@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ihar Hrachyshka [Tue, 16 May 2017 14:53:43 +0000 (07:53 -0700)]
arp: honour gratuitous ARP _replies_
When arp_accept is 1, gratuitous ARPs are supposed to override matching
entries irrespective of whether they arrive during locktime. This was
implemented in commit
56022a8fdd87 ("ipv4: arp: update neighbour address
when a gratuitous arp is received and arp_accept is set")
There is a glitch in the patch though. RFC 2002, section 4.6, "ARP,
Proxy ARP, and Gratuitous ARP", defines gratuitous ARPs so that they can
be either of Request or Reply type. Those Reply gratuitous ARPs can be
triggered with standard tooling, for example, arping -A option does just
that.
This patch fixes the glitch, making both Request and Reply flavours of
gratuitous ARPs to behave identically.
As per RFC, if gratuitous ARPs are of Reply type, their Target Hardware
Address field should also be set to the link-layer address to which this
cache entry should be updated. The field is present in ARP over Ethernet
but not in IEEE 1394. In this patch, I don't consider any broadcasted
ARP replies as gratuitous if the field is not present, to conform the
standard. It's not clear whether there is such a thing for IEEE 1394 as
a gratuitous ARP reply; until it's cleared up, we will ignore such
broadcasts. Note that they will still update existing ARP cache entries,
assuming they arrive out of locktime time interval.
Signed-off-by: Ihar Hrachyshka <ihrachys@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Sat, 11 Mar 2017 19:09:45 +0000 (19:09 +0000)]
dm cache: handle kmalloc failure allocating background_tracker struct
Currently there is no kmalloc failure check on the allocation of
the background_tracker struct in btracker_create(), and so a NULL return
will lead to a NULL pointer dereference. Add a NULL check.
Detected by CoverityScan, CID#
1416587 ("Dereference null return value")
Fixes:
b29d4986d ("dm cache: significant rework to leverage dm-bio-prison-v2")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Tin Huynh [Wed, 17 May 2017 04:25:34 +0000 (11:25 +0700)]
i2c: xgene: Set ACPI_COMPANION_I2C
With ACPI, i2c-core requires ACPI companion to be set in order for it
to create slave device.
This patch sets the ACPI companion accordingly.
Signed-off-by: Tin Huynh <tnhuynh@apm.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Thomas Petazzoni [Tue, 16 May 2017 12:07:24 +0000 (14:07 +0200)]
i2c: mv64xxx: don't override deferred probing when getting irq
There is no reason to use platform_get_irq() for non-DT probing and
irq_of_parse_and_map() for DT probing. Indeed, platform_get_irq()
works fine for both.
In addition, using platform_get_irq() properly returns -EPROBE_DEFER
when the interrupt controller is not yet available, so instead of
inventing our own error code (-ENXIO), return the one provided by
platform_get_irq().
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Linus Torvalds [Tue, 16 May 2017 20:29:07 +0000 (13:29 -0700)]
Merge tag 'pstore-v4.12-rc2' of git://git./linux/kernel/git/kees/linux
Pull pstore fix from Kees Cook:
"Fix bad EFI vars iterator usage"
* tag 'pstore-v4.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
efi-pstore: Fix read iter after pstore API refactor
Arnd Bergmann [Tue, 16 May 2017 11:27:49 +0000 (13:27 +0200)]
mlx5e: add CONFIG_INET dependency
We now reference the arp_tbl, which requires IPv4 support to be
enabled in the kernel, otherwise we get a link error:
drivers/net/built-in.o: In function `mlx5e_tc_update_neigh_used_value':
(.text+0x16afec): undefined reference to `arp_tbl'
drivers/net/built-in.o: In function `mlx5e_rep_neigh_init':
en_rep.c:(.text+0x16c16d): undefined reference to `arp_tbl'
drivers/net/built-in.o: In function `mlx5e_rep_netevent_event':
en_rep.c:(.text+0x16cbb5): undefined reference to `arp_tbl'
This adds a Kconfig dependency for it.
Fixes:
232c001398ae ("net/mlx5e: Add support to neighbour update flow")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mikulas Patocka [Sun, 30 Apr 2017 21:32:28 +0000 (17:32 -0400)]
dm bufio: make the parameter "retain_bytes" unsigned long
Change the type of the parameter "retain_bytes" from unsigned to
unsigned long, so that on 64-bit machines the user can set more than
4GiB of data to be retained.
Also, change the type of the variable "count" in the function
"__evict_old_buffers" to unsigned long. The assignment
"count = c->n_buffers[LIST_CLEAN] + c->n_buffers[LIST_DIRTY];"
could result in unsigned long to unsigned overflow and that could result
in buffers not being freed when they should.
While at it, avoid division in get_retain_buffers(). Division is slow,
we can change it to shift because we have precalculated the log2 of
block size.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
David Ahern [Tue, 16 May 2017 06:19:17 +0000 (23:19 -0700)]
net: Improve handling of failures on link and route dumps
In general, rtnetlink dumps do not anticipate failure to dump a single
object (e.g., link or route) on a single pass. As both route and link
objects have grown via more attributes, that is no longer a given.
netlink dumps can handle a failure if the dump function returns an
error; specifically, netlink_dump adds the return code to the response
if it is <= 0 so userspace is notified of the failure. The missing
piece is the rtnetlink dump functions returning the error.
Fix route and link dump functions to return the errors if no object is
added to an skb (detected by skb->len != 0). IPv6 route dumps
(rt6_dump_route) already return the error; this patch updates IPv4 and
link dumps. Other dump functions may need to be ajusted as well.
Reported-by: Jan Moskyto Matejka <mq@ucw.cz>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christoph Hellwig [Tue, 16 May 2017 06:51:38 +0000 (09:51 +0300)]
net/smc: Add warning about remote memory exposure
The driver explicitly bypasses APIs to register all memory once a
connection is made, and thus allows remote access to memory.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Acked-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Mon, 15 May 2017 15:33:37 +0000 (17:33 +0200)]
smc: switch to usage of IB_PD_UNSAFE_GLOBAL_RKEY
Currently, SMC enables remote access to physical memory when a user
has successfully configured and established an SMC-connection until ten
minutes after the last SMC connection is closed. Because this is considered
a security risk, drivers are supposed to use IB_PD_UNSAFE_GLOBAL_RKEY in
such a case.
This patch changes the current SMC code to use IB_PD_UNSAFE_GLOBAL_RKEY.
This improves user awareness, but does not remove the security risk itself.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kees Cook [Fri, 12 May 2017 21:52:34 +0000 (14:52 -0700)]
efi-pstore: Fix read iter after pstore API refactor
During the internal pstore API refactoring, the EFI vars read entry was
accidentally made to update a stack variable instead of the pstore
private data pointer. This corrects the problem (and removes the now
needless argument).
Fixes:
125cc42baf8a ("pstore: Replace arguments for read() API")
Signed-off-by: Kees Cook <keescook@chromium.org>
Wolfram Sang [Tue, 16 May 2017 16:57:39 +0000 (18:57 +0200)]
Merge branch 'i2c-mux/for-current' of https://github.com/peda-r/i2c-mux into i2c/for-current
Pull bugfixes from the i2c mux subsubsystem:
This fixes an old bug in resource cleanup on failure in i2c-mux-reg and
a new log spamming bug from this merge window in the i2c-mux core.
Thomas Winter [Mon, 15 May 2017 22:14:44 +0000 (10:14 +1200)]
ipmr: vrf: Find VIFs using the actual device
The skb->dev that is passed into ip_mr_input is
the loX device for VRFs. When we lookup a vif
for this dev, none is found as we do not create
vifs for loopbacks. Instead lookup a vif for the
actual device that the packet was received on,
eg the vlan.
Signed-off-by: Thomas Winter <Thomas.Winter@alliedtelesis.co.nz>
cc: David Ahern <dsa@cumulusnetworks.com>
cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
cc: roopa <roopa@cumulusnetworks.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Soheil Hassas Yeganeh [Mon, 15 May 2017 21:05:47 +0000 (17:05 -0400)]
tcp: eliminate negative reordering in tcp_clean_rtx_queue
tcp_ack() can call tcp_fragment() which may dededuct the
value tp->fackets_out when MSS changes. When prior_fackets
is larger than tp->fackets_out, tcp_clean_rtx_queue() can
invoke tcp_update_reordering() with negative values. This
results in absurd tp->reodering values higher than
sysctl_tcp_max_reordering.
Note that tcp_update_reordering indeeds sets tp->reordering
to min(sysctl_tcp_max_reordering, metric), but because
the comparison is signed, a negative metric always wins.
Fixes:
c7caf8d3ed7a ("[TCP]: Fix reord detection due to snd_una covered holes")
Reported-by: Rebecca Isaacs <risaacs@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Tue, 16 May 2017 16:24:44 +0000 (09:24 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
- convert the debug feature to refcount_t
- reduce the copy size for strncpy_from_user
- 8 bug fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/virtio: change virtio_feature_desc:features type to __le32
s390: convert debug_info.ref_count from atomic_t to refcount_t
s390: move _text symbol to address higher than zero
s390/qdio: increase string buffer size
s390/ccwgroup: increase string buffer size
s390/topology: let topology_mnest_limit() return unsigned char
s390/uaccess: use sane length for __strncpy_from_user()
s390/uprobes: fix compile for !KPROBES
s390/ftrace: fix compile for !MODULES
s390/cputime: fix incorrect system time
Linus Torvalds [Tue, 16 May 2017 16:18:18 +0000 (09:18 -0700)]
Merge tag 'edac_fix_for_4.12' of git://git./linux/kernel/git/bp/bp
Pull EDAC fix from Borislav Petkov:
"A single amd64_edac fix correcting chip select sizes reporting on
F17h"
* tag 'edac_fix_for_4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
EDAC, amd64: Fix reporting of Chip Select sizes on Fam17h
Gao Feng [Tue, 16 May 2017 01:30:18 +0000 (09:30 +0800)]
ebtables: arpreply: Add the standard target sanity check
The info->target comes from userspace and it would be used directly.
So we need to add the sanity check to make sure it is a valid standard
target, although the ebtables tool has already checked it. Kernel needs
to validate anything coming from userspace.
If the target is set as an evil value, it would break the ebtables
and cause a panic. Because the non-standard target is treated as one
offset.
Now add one helper function ebt_invalid_target, and we would replace
the macro INVALID_TARGET later.
Signed-off-by: Gao Feng <gfree.wind@vip.163.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Linus Torvalds [Mon, 15 May 2017 22:50:49 +0000 (15:50 -0700)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Track alignment in BPF verifier so that legitimate programs won't be
rejected on !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS architectures.
2) Make tail calls work properly in arm64 BPF JIT, from Deniel
Borkmann.
3) Make the configuration and semantics Generic XDP make more sense and
don't allow both generic XDP and a driver specific instance to be
active at the same time. Also from Daniel.
4) Don't crash on resume in xen-netfront, from Vitaly Kuznetsov.
5) Fix use-after-free in VRF driver, from Gao Feng.
6) Use netdev_alloc_skb_ip_align() to avoid unaligned IP headers in
qca_spi driver, from Stefan Wahren.
7) Always run cleanup routines in BPF samples when we get SIGTERM, from
Andy Gospodarek.
8) The mdio phy code should bring PHYs out of reset using the shared
GPIO lines before invoking bus->reset(). From Florian Fainelli.
9) Some USB descriptor access endian fixes in various drivers from
Johan Hovold.
10) Handle PAUSE advertisements properly in mlx5 driver, from Gal
Pressman.
11) Fix reversed test in mlx5e_setup_tc(), from Saeed Mahameed.
12) Cure netdev leak in AF_PACKET when using timestamping via control
messages. From Douglas Caetano dos Santos.
13) netcp doesn't support HWTSTAMP_FILTER_ALl, reject it. From Miroslav
Lichvar.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits)
ldmvsw: stop the clean timer at beginning of remove
ldmvsw: unregistering netdev before disable hardware
net: netcp: fix check of requested timestamping filter
ipv6: avoid dad-failures for addresses with NODAD
qed: Fix uninitialized data in aRFS infrastructure
mdio: mux: fix device_node_continue.cocci warnings
net/packet: fix missing net_device reference release
net/mlx4_core: Use min3 to select number of MSI-X vectors
macvlan: Fix performance issues with vlan tagged packets
net: stmmac: use correct pointer when printing normal descriptor ring
net/mlx5: Use underlay QPN from the root name space
net/mlx5e: IPoIB, Only support regular RQ for now
net/mlx5e: Fix setup TC ndo
net/mlx5e: Fix ethtool pause support and advertise reporting
net/mlx5e: Use the correct pause values for ethtool advertising
vmxnet3: ensure that adapter is in proper state during force_close
sfc: revert changes to NIC revision numbers
net: ch9200: add missing USB-descriptor endianness conversions
net: irda: irda-usb: fix firmware name on big-endian hosts
net: dsa: mv88e6xxx: add default case to switch
...
Linus Torvalds [Mon, 15 May 2017 22:27:02 +0000 (15:27 -0700)]
Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"A set of minor cifs fixes"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
[CIFS] Minor cleanup of xattr query function
fs: cifs: transport: Use time_after for time comparison
SMB2: Fix share type handling
cifs: cifsacl: Use a temporary ops variable to reduce code length
Don't delay freeing mids when blocked on slow socket write of request
CIFS: silence lockdep splat in cifs_relock_file()
David S. Miller [Mon, 15 May 2017 19:36:09 +0000 (15:36 -0400)]
Merge branch 'ldmsw-fixes'
Shannon Nelson says:
====================
ldmvsw: port removal stability
Under heavy reboot stress testing we found a couple of timing issues
when removing the device that could cause the kernel great heartburn,
addressed by these two patches.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Mon, 15 May 2017 17:51:08 +0000 (10:51 -0700)]
ldmvsw: stop the clean timer at beginning of remove
Stop the clean timer earlier to be sure there's no asynchronous
interference while stopping the port.
Orabug:
25748241
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Tai [Mon, 15 May 2017 17:51:07 +0000 (10:51 -0700)]
ldmvsw: unregistering netdev before disable hardware
When running LDom binding/unbinding test, kernel may panic
in ldmvsw_open(). It is more likely that because we're removing
the ldc connection before unregistering the netdev in vsw_port_remove(),
we set up a window of time where one process could be removing the
device while another trying to UP the device. This also sometimes causes
vio handshake error due to opening a device without closing it completely.
We should unregister the netdev before we disable the "hardware".
Orabug:
25980913,
25925306
Signed-off-by: Thomas Tai <thomas.tai@oracle.com>
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Miroslav Lichvar [Mon, 15 May 2017 14:04:36 +0000 (16:04 +0200)]
net: netcp: fix check of requested timestamping filter
The driver doesn't support timestamping of all received packets and
should return error when trying to enable the HWTSTAMP_FILTER_ALL
filter.
Cc: WingMan Kwok <w-kwok2@ti.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christoph Hellwig [Mon, 15 May 2017 15:28:38 +0000 (17:28 +0200)]
dm mpath: multipath_clone_and_map must not return -EIO
Since
412445ac ("dm: introduce a new DM_MAPIO_KILL return value"), the
clone_and_map_rq methods must not return errno values, so fix it up
to properly return DM_MAPIO_KILL, instead of the -EIO value that snuck
in due to a conflict between two patches.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Christoph Hellwig [Mon, 15 May 2017 15:28:37 +0000 (17:28 +0200)]
dm mpath: don't return -EIO from dm_report_EIO
Instead just turn the macro into a helper for the warning message.
This removes an unnecessary assignment and will allow the next commit to
fix a place where -EIO is the wrong return value.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Christoph Hellwig [Mon, 15 May 2017 15:28:36 +0000 (17:28 +0200)]
dm rq: add a missing break to map_request
We don't want to bug when receiving a DM_MAPIO_KILL value..
Fixes:
412445ac ("dm: introduce a new DM_MAPIO_KILL return value")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Joe Thornber [Mon, 15 May 2017 13:45:40 +0000 (09:45 -0400)]
dm space map disk: fix some book keeping in the disk space map
When decrementing the reference count for a block, the free count wasn't
being updated if the reference count went to zero.
Cc: stable@vger.kernel.org
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Joe Thornber [Mon, 15 May 2017 13:43:05 +0000 (09:43 -0400)]
dm thin metadata: call precommit before saving the roots
These calls were the wrong way round in __write_initial_superblock.
Cc: stable@vger.kernel.org
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
David S. Miller [Mon, 15 May 2017 18:38:04 +0000 (14:38 -0400)]
Merge tag 'mlx5-fixes-2017-05-12-V2' of git://git./linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
Mellanox, mlx5 fixes 2017-05-12
This series contains some mlx5 fixes for net.
Please pull and let me know if there's any problem.
For -stable:
("net/mlx5e: Fix ethtool pause support and advertise reporting") kernels >= 4.8
("net/mlx5e: Use the correct pause values for ethtool advertising") kernels >= 4.8
v1->v2:
Dropped statistics spinlock patch, it needs some extra work.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Mahesh Bandewar [Sat, 13 May 2017 00:03:39 +0000 (17:03 -0700)]
ipv6: avoid dad-failures for addresses with NODAD
Every address gets added with TENTATIVE flag even for the addresses with
IFA_F_NODAD flag and dad-work is scheduled for them. During this DAD process
we realize it's an address with NODAD and complete the process without
sending any probe. However the TENTATIVE flags stays on the
address for sometime enough to cause misinterpretation when we receive a NS.
While processing NS, if the address has TENTATIVE flag, we mark it DADFAILED
and endup with an address that was originally configured as NODAD with
DADFAILED.
We can't avoid scheduling dad_work for addresses with NODAD but we can
avoid adding TENTATIVE flag to avoid this racy situation.
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Sun, 14 May 2017 09:21:23 +0000 (12:21 +0300)]
qed: Fix uninitialized data in aRFS infrastructure
Current memset is using incorrect type of variable, causing the
upper-half of the strucutre to be left uninitialized and causing:
ethernet/qlogic/qed/qed_init_fw_funcs.c: In function 'qed_set_rfs_mode_disable':
ethernet/qlogic/qed/qed_init_fw_funcs.c:993:3: error: '*((void *)&ramline+4)' is used uninitialized in this function [-Werror=uninitialized]
Fixes:
d51e4af5c209 ("qed: aRFS infrastructure support")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julia Lawall [Fri, 12 May 2017 14:54:23 +0000 (22:54 +0800)]
mdio: mux: fix device_node_continue.cocci warnings
Device node iterators put the previous value of the index variable, so an
explicit put causes a double put.
In particular, of_mdiobus_register can fail before doing anything
interesting, so one could view it as a no-op from the reference count
point of view.
Generated by: scripts/coccinelle/iterators/device_node_continue.cocci
CC: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Douglas Caetano dos Santos [Fri, 12 May 2017 18:19:15 +0000 (15:19 -0300)]
net/packet: fix missing net_device reference release
When using a TX ring buffer, if an error occurs processing a control
message (e.g. invalid message), the net_device reference is not
released.
Fixes
c14ac9451c348 ("sock: enable timestamping using control messages")
Signed-off-by: Douglas Caetano dos Santos <douglascs@taghos.com.br>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
yuval.shaia@oracle.com [Fri, 12 May 2017 06:10:51 +0000 (09:10 +0300)]
net/mlx4_core: Use min3 to select number of MSI-X vectors
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Yasevich [Thu, 11 May 2017 15:09:52 +0000 (11:09 -0400)]
macvlan: Fix performance issues with vlan tagged packets
Macvlan always turns on offload features that have sofware
fallback (NETIF_GSO_SOFTWARE). This allows much higher guest-guest
communications over macvtap.
However, macvtap does not turn on these features for vlan tagged traffic.
As a result, depending on the HW that mactap is configured on, the
performance of guest-guest communication over a vlan is very
inconsistent. If the HW supports TSO/UFO over vlans, then the
performance will be fine. If not, the the performance will suffer
greatly since the VM may continue using TSO/UFO, and will force the host
segment the traffic and possibly overlow the macvtap queue.
This patch adds the always on offloads to vlan_features. This
makes sure that any vlan tagged traffic between 2 guest will not
be segmented needlessly.
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Peter Rosin [Mon, 15 May 2017 07:03:50 +0000 (09:03 +0200)]
i2c: mux: only print failure message on error
As is, a failure message is printed unconditionally, which is confusing.
And noisy.
Fixes:
8d4d159f25a7 ("i2c: mux: provide more info on failure in i2c_mux_add_adapter")
Signed-off-by: Peter Rosin <peda@axentia.se>
Peter Rosin [Mon, 15 May 2017 16:48:55 +0000 (18:48 +0200)]
i2c: mux: reg: rename label to indicate what it does
That maintains sanity if it is ever called from some other spot, and
also makes the label names coherent.
Signed-off-by: Peter Rosin <peda@axentia.se>
Peter Rosin [Sun, 7 May 2017 05:16:30 +0000 (07:16 +0200)]
i2c: mux: reg: put away the parent i2c adapter on probe failure
It is only prudent to let go of resources that are not used.
Fixes:
b3fdd32799d8 ("i2c: mux: Add register-based mux i2c-mux-reg")
Signed-off-by: Peter Rosin <peda@axentia.se>
Niklas Cassel [Mon, 15 May 2017 08:56:06 +0000 (10:56 +0200)]
net: stmmac: use correct pointer when printing normal descriptor ring
There are two pointers in sysfs_display_ring,
one that increments if using normal dma descriptors,
another if using extended dma descriptors.
When printing the normal dma descriptors, the wrong pointer is used,
thus the printed descriptor addresses are incorrect.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso [Mon, 15 May 2017 10:17:34 +0000 (11:17 +0100)]
netfilter: nf_tables: revisit chain/object refcounting from elements
Andreas reports that the following incremental update using our commit
protocol doesn't work.
# nft -f incremental-update.nft
delete element ip filter client_to_any { 10.180.86.22 : goto CIn_1 }
delete chain ip filter CIn_1
... Error: Could not process rule: Device or resource busy
The existing code is not well-integrated into the commit phase protocol,
since element deletions do not result in refcount decrement from the
preparation phase. This results in bogus EBUSY errors like the one
above.
Two new functions come with this patch:
* nft_set_elem_activate() function is used from the abort path, to
restore the set element refcounting on objects that occurred from
the preparation phase.
* nft_set_elem_deactivate() that is called from nft_del_setelem() to
decrement set element refcounting on objects from the preparation
phase in the commit protocol.
The nft_data_uninit() has been renamed to nft_data_release() since this
function does not uninitialize any data store in the data register,
instead just releases the references to objects. Moreover, a new
function nft_data_hold() has been introduced to be used from
nft_set_elem_activate().
Reported-by: Andreas Schultz <aschultz@tpip.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pablo Neira Ayuso [Mon, 15 May 2017 10:17:29 +0000 (11:17 +0100)]
netfilter: nf_tables: missing sanitization in data from userspace
Do not assume userspace always sends us NFT_DATA_VALUE for bitwise and
cmp expressions. Although NFT_DATA_VERDICT does not make any sense, it
is still possible to handcraft a netlink message using this incorrect
data type.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Liping Zhang [Sun, 14 May 2017 13:35:22 +0000 (21:35 +0800)]
netfilter: nf_tables: can't assume lock is acquired when dumping set elems
When dumping the elements related to a specified set, we may invoke the
nf_tables_dump_set with the NFNL_SUBSYS_NFTABLES lock not acquired. So
we should use the proper rcu operation to avoid race condition, just
like other nft dump operations.
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Eric Leblond [Thu, 11 May 2017 16:56:38 +0000 (18:56 +0200)]
netfilter: synproxy: fix conntrackd interaction
This patch fixes the creation of connection tracking entry from
netlink when synproxy is used. It was missing the addition of
the synproxy extension.
This was causing kernel crashes when a conntrack entry created by
conntrackd was used after the switch of traffic from active node
to the passive node.
Signed-off-by: Eric Leblond <eric@regit.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Willem de Bruijn [Tue, 9 May 2017 20:17:37 +0000 (16:17 -0400)]
netfilter: xtables: zero padding in data_to_user
When looking up an iptables rule, the iptables binary compares the
aligned match and target data (XT_ALIGN). In some cases this can
exceed the actual data size to include padding bytes.
Before commit
f77bc5b23fb1 ("iptables: use match, target and data
copy_to_user helpers") the malloc()ed bytes were overwritten by the
kernel with kzalloced contents, zeroing the padding and making the
comparison succeed. After this patch, the kernel copies and clears
only data, leaving the padding bytes undefined.
Extend the clear operation from data size to aligned data size to
include the padding bytes, if any.
Padding bytes can be observed in both match and target, and the bug
triggered, by issuing a rule with match icmp and target ACCEPT:
iptables -t mangle -A INPUT -i lo -p icmp --icmp-type 1 -j ACCEPT
iptables -t mangle -D INPUT -i lo -p icmp --icmp-type 1 -j ACCEPT
Fixes:
f77bc5b23fb1 ("iptables: use match, target and data copy_to_user helpers")
Reported-by: Paul Moore <pmoore@redhat.com>
Reported-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pablo Neira Ayuso [Mon, 15 May 2017 10:50:12 +0000 (12:50 +0200)]
Merge tag 'ipvs-fixes-for-v4.12' of git./linux/kernel/git/horms/ipvs
Simon Horman says:
====================
IPVS Fixes for v4.12
please consider this fix to IPVS for v4.12.
* It is a fix from Julian Anastasov to only SNAT SNAT packet replies only for
NATed connections
My understanding is that this fix is appropriate for 4.9.25, 4.10.13, 4.11
as well as the nf tree. Julian has separately posted backports for other
-stable kernels; please see:
* [PATCH 3.2.88,3.4.113 -stable 1/3] ipvs: SNAT packet replies only for
NATed connections
* [PATCH 3.10.105,3.12.73,3.16.43,4.1.39 -stable 2/3] ipvs: SNAT packet
replies only for NATed connections
* [PATCH 4.4.65 -stable 3/3] ipvs: SNAT packet replies only for NATed
connections
====================
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Liping Zhang [Sun, 7 May 2017 14:01:56 +0000 (22:01 +0800)]
netfilter: nfnl_cthelper: reject del request if helper obj is in use
We can still delete the ct helper even if it is in use, this will cause
a use-after-free error. In more detail, I mean:
# nfct helper add ssdp inet udp
# iptables -t raw -A OUTPUT -p udp -j CT --helper ssdp
# nfct helper delete ssdp //--> oops, succeed!
BUG: unable to handle kernel paging request at
000026ca
IP: 0x26ca
[...]
Call Trace:
? ipv4_helper+0x62/0x80 [nf_conntrack_ipv4]
nf_hook_slow+0x21/0xb0
ip_output+0xe9/0x100
? ip_fragment.constprop.54+0xc0/0xc0
ip_local_out+0x33/0x40
ip_send_skb+0x16/0x80
udp_send_skb+0x84/0x240
udp_sendmsg+0x35d/0xa50
So add reference count to fix this issue, if ct helper is used by
others, reject the delete request.
Apply this patch:
# nfct helper delete ssdp
nfct v1.4.3: netlink error: Device or resource busy
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Liping Zhang [Sun, 7 May 2017 14:01:55 +0000 (22:01 +0800)]
netfilter: introduce nf_conntrack_helper_put helper function
And convert module_put invocation to nf_conntrack_helper_put, this is
prepared for the followup patch, which will add a refcnt for cthelper,
so we can reject the deleting request when cthelper is in use.
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>