OSDN Git Service
Aya Mahfouz [Wed, 4 Mar 2015 05:29:28 +0000 (07:29 +0200)]
staging: lustre: lclient: remove extra parentheses around right bit shift operation
Removes extra parentheses around bitwise right shift operations.
The cases handled here are when the resultant value is assigned
to a variable. The issue was detected and resolved using the
following coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
>>
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
>>
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
>>
-c)
+c
,...);
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 05:28:48 +0000 (07:28 +0200)]
staging: comedi: drivers: remove extra parentheses around right bit shift operation
Removes extra parentheses around bitwise right shift operation.
The issue was detected and resolved using the following coccinelle
script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
>>
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
>>
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
>>
-c)
+c
,...);
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vaishali Thakkar [Tue, 3 Mar 2015 17:04:22 +0000 (22:34 +0530)]
Staging: rtl8712: Eliminate use of _init_timer
This patch introduces the use of API function setup_timer
instead of driver specific function _init_timer as it is
the preferred and standard way to setup and set the timer.
To be compatible with the change, argument types of
referenced functions are changed. Also, definition of
function _init_timer is removed as it is no longer needed
after this change.
This is done using Coccinelle and semantic patch used for
this is as follows:
@@ expression x, y; identifier a, b;@@
- _init_timer (&x, y, a, b);
+ setup_timer (&x, a, (unsigned long)b);
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Tue, 3 Mar 2015 14:08:38 +0000 (16:08 +0200)]
staging: rtl8192u: ieee80211: replace memset(x,0,ETH_ALEN) by eth_zero_addr(x)
eth_zero_addr() is a wrapper function for memset if 0 is going to
be assigned to a mac address. The replacement was done by the
following coccinelle script:
@header@
@@
#include <linux/etherdevice.h>
@eth_zero_addr@
expression e;
@@
-memset(e,0,ETH_ALEN);
+eth_zero_addr(e);
@eth_broadcast_addr@
identifier e;
@@
-memset(e,\(0xff\|0xFF\|255\),ETH_ALEN);
+eth_broadcast_addr(e);
@linux_header depends on !header && (eth_zero_addr || eth_broadcast_addr) @
@@
+ #include <linux/etherdevice.h>
+
@special_header depends on !header && !linux_header && (eth_zero_addr || eth_broadcast_addr) @
@@
+
+ #include <linux/etherdevice.h>
+
@custom_header depends on !header && !linux_header && !special_header && (eth_zero_addr || eth_broadcast_addr) @
@@
+
+ #include <linux/etherdevice.h>
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Tue, 3 Mar 2015 14:06:19 +0000 (16:06 +0200)]
staging: rtl8192u: replace memset(x,0,ETH_ALEN) by eth_zero_addr(x)
eth_zero_addr() is a wrapper function for memset if 0 is going to
be assigned to a mac address. The replacement was done by the
following coccinelle script:
@header@
@@
#include <linux/etherdevice.h>
@eth_zero_addr@
expression e;
@@
-memset(e,0,ETH_ALEN);
+eth_zero_addr(e);
@eth_broadcast_addr@
identifier e;
@@
-memset(e,\(0xff\|0xFF\|255\),ETH_ALEN);
+eth_broadcast_addr(e);
@linux_header depends on !header && (eth_zero_addr || eth_broadcast_addr) @
@@
+ #include <linux/etherdevice.h>
+
@special_header depends on !header && !linux_header && (eth_zero_addr || eth_broadcast_addr) @
@@
+
+ #include <linux/etherdevice.h>
+
@custom_header depends on !header && !linux_header && !special_header && (eth_zero_addr || eth_broadcast_addr) @
@@
+
+ #include <linux/etherdevice.h>
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Tue, 3 Mar 2015 14:04:20 +0000 (16:04 +0200)]
staging: rtl8192e: replace memset(x,0,ETH_ALEN) by eth_zero_addr(x)
eth_zero_addr() is a wrapper function for memset if 0 is going to
be assigned to a mac address. The replacement was done by the
following coccinelle script:
@header@
@@
#include <linux/etherdevice.h>
@eth_zero_addr@
expression e;
@@
-memset(e,0,ETH_ALEN);
+eth_zero_addr(e);
@eth_broadcast_addr@
identifier e;
@@
-memset(e,\(0xff\|0xFF\|255\),ETH_ALEN);
+eth_broadcast_addr(e);
@linux_header depends on !header && (eth_zero_addr || eth_broadcast_addr) @
@@
+ #include <linux/etherdevice.h>
+
@special_header depends on !header && !linux_header && (eth_zero_addr || eth_broadcast_addr) @
@@
+
+ #include <linux/etherdevice.h>
+
@custom_header depends on !header && !linux_header && !special_header && (eth_zero_addr || eth_broadcast_addr) @
@@
+
+ #include <linux/etherdevice.h>
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Tue, 3 Mar 2015 14:03:35 +0000 (16:03 +0200)]
staging: rtl8192e: replace memset(x,0,ETH_ALEN) by eth_zero_addr(x)
eth_zero_addr() is a wrapper function for memset if 0 is going to
be assigned to a mac address. The replacement was done by the
following coccinelle script:
@header@
@@
#include <linux/etherdevice.h>
@eth_zero_addr@
expression e;
@@
-memset(e,0,ETH_ALEN);
+eth_zero_addr(e);
@eth_broadcast_addr@
identifier e;
@@
-memset(e,\(0xff\|0xFF\|255\),ETH_ALEN);
+eth_broadcast_addr(e);
@linux_header depends on !header && (eth_zero_addr || eth_broadcast_addr) @
@@
+ #include <linux/etherdevice.h>
+
@special_header depends on !header && !linux_header && (eth_zero_addr || eth_broadcast_addr) @
@@
+
+ #include <linux/etherdevice.h>
+
@custom_header depends on !header && !linux_header && !special_header && (eth_zero_addr || eth_broadcast_addr) @
@@
+
+ #include <linux/etherdevice.h>
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vaishali Thakkar [Tue, 3 Mar 2015 07:39:23 +0000 (13:09 +0530)]
Staging: rtl8192u: Fix duplicate conditional branch
Replace duplicate branch with correct value. This branch
is supposed to work for low thresh value.
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vaishali Thakkar [Tue, 3 Mar 2015 07:38:24 +0000 (13:08 +0530)]
Staging: rtl8192e: Eliminate use of macro IS_NIC_DOWN
This patch eliminates use of unnecessory macro IS_NIC_DOWN
and replaces it with standard code.
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dilek Uzulmez [Mon, 2 Mar 2015 21:56:54 +0000 (23:56 +0200)]
Staging: rtl8192u: Fix quoted string split across lines
This patch fixes checkpatch.pl warning in file ieee80211_crypt.c
WARNING: "quoted string split across lines warning"
Signed-off-by: Dilek Uzulmez <dilekuzulmez@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Supriya Karanth [Tue, 3 Mar 2015 14:48:21 +0000 (23:48 +0900)]
staging: lustre: remove initialization of static ints
static ints are initialized to 0 by the compiler.
Explicit initialization is not necessary.
Found by checkpatch.pl - ERROR: do not initialise statics to 0 or NULL
changes made using coccinelle script:
@@
type T;
identifier var;
@@
-static T var = 0;
+static T var;
Signed-off-by: Supriya Karanth <iskaranth@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cristina Opriceana [Wed, 4 Mar 2015 00:37:15 +0000 (02:37 +0200)]
Staging: iio: Added define guards where needed
The following files were added define guards to prevent multiple
inclusion.
Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Tue, 3 Mar 2015 14:27:37 +0000 (16:27 +0200)]
staging: iio: meter: add check on return variables
adds checks on variables that are used to return values. If
the value is less than zero, this indicates that an error
occurred and hence a message is printed through dev_err.
Checks are made on negative values only since spi_* functions
return negative error codes.
The functions were found using the following script but the
aforementioned modification was what was carried out in the end:
@@
identifier len,f;
@@
-int len;
... when != len
when strict
-len =
+return
f(...);
-return len;
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Navya Sri Nizamkari [Tue, 3 Mar 2015 11:38:06 +0000 (17:08 +0530)]
staging: comedi: Remove if condition.
This patch removes a if condition which has a semicolon
after it. As the conditional check is redundant, the comment
before it is also changed. The following
coccinelle script was used to detect the pattern of a
semicolon after if.
@r1@
position p;
@@
if (...);@p
@script:python@
p0 << r1.p;
@@
// Emacs org-mode output
cocci.print_main("", p0)
cocci.print_secs("", p0)
Signed-off-by: Navya Sri Nizamkari <navyasri.tech@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tina Johnson [Mon, 2 Mar 2015 18:10:26 +0000 (23:40 +0530)]
staging: lustre: lustre: libcfs: Replaced printk() with pr_err() and pr_cont()
The following checkpatch warning was fixed:
Prefer [subsystem eg: netdev]_err([subsystem]dev
with the help of Coccinelle. pr_cont() was used to replace those printk
statements which followed a printk that did not end with a '\n'. The following
semantic patch was used to replace printk() with pr_err():
@a@
expression e;
@@
printk(e,...);
@script:python b@
e << a.e;
y;
@@
import re
match = re.match('KERN_ERR ', e);
if (match == None):
cocci.include_match(False)
else:
m = re.sub('KERN_ERR ', '', e)
coccinelle.y = m;
@c@
expression a.e;
identifier b.y;
@@
- printk(e,
+ pr_err(y,
...);
Signed-off-by: Tina Johnson <tinajohnson.1234@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tina Johnson [Mon, 2 Mar 2015 18:10:25 +0000 (23:40 +0530)]
staging: lustre: lustre: libcfs: Replaced printk() with pr_err()
The following checkpatch warning was fixed:
Prefer [subsystem eg: netdev]_err([subsystem]dev
with the help of Coccinelle. The following semantic patch was used:
@a@
expression e;
@@
printk(e,...);
@script:python b@
e << a.e;
y;
@@
import re
match = re.match('KERN_ERR ', e);
if (match == None):
cocci.include_match(False)
else:
m = re.sub('KERN_ERR ', '', e)
coccinelle.y = m;
@c@
expression a.e;
identifier b.y;
@@
- printk(e,
+ pr_err(y,
...);
Signed-off-by: Tina Johnson <tinajohnson.1234@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:25:03 +0000 (15:25 -0500)]
staging: rtl8723au: odm.c: Break some lines down to 80 characters
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:25:02 +0000 (15:25 -0500)]
staging: rtl8723au: ODM_Write_DIG23A(): Cosmetic cleanups
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:25:01 +0000 (15:25 -0500)]
staging: rtl8723au: Clean up odm_RefreshRateAdaptiveMask()
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:25:00 +0000 (15:25 -0500)]
staging: rtl8723au: Clean up FindMinimumRSSI()
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:59 +0000 (15:24 -0500)]
staging: rtl8723au: Clean up odm_RSSIMonitorCheck()
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:58 +0000 (15:24 -0500)]
staging: rtl8723au: ODM_TXPowerTrackingCheck23a(): Remove no-op function
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:57 +0000 (15:24 -0500)]
staging: rtl8723au: Remove write only bIsCurRDLState
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:56 +0000 (15:24 -0500)]
staging: rtl8723au: Remove unused struct pri_cca
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:55 +0000 (15:24 -0500)]
staging: rtl8723au: Remove unused struct odm_fat_t
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:54 +0000 (15:24 -0500)]
staging: rtl8723au: Remove unused Funai TV hack
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:53 +0000 (15:24 -0500)]
staging: rtl8723au: Remove write-only variable ControlChannel
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:52 +0000 (15:24 -0500)]
staging: rtl8723au: SupportInterface is always set to USB
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:51 +0000 (15:24 -0500)]
staging: rtl8723au: Remove no-op ODM_CMNINFO_PLATFORM
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:50 +0000 (15:24 -0500)]
staging: rtl8723au: odm_dtc(): Remove no-op function
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:49 +0000 (15:24 -0500)]
staging: rtl8723au: Make odm_PHY_SaveAFERegisters() readable
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:48 +0000 (15:24 -0500)]
staging: rtl8723au: Remove unused ODM ability flags
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:47 +0000 (15:24 -0500)]
staging: rtl8723au: ODM_RF_CALIBRATION is never set
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:46 +0000 (15:24 -0500)]
staging: rtl8723au: ODM_RF_TX_PWR_TRACK is always set
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:45 +0000 (15:24 -0500)]
staging: rtl8723au: ODM_BB_PWR_SAVE is unused
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:44 +0000 (15:24 -0500)]
staging: rtl8723au: ODM_BB_CCK_PD is always set
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:43 +0000 (15:24 -0500)]
staging: rtl8723au: ODM_BB_RSSI_MONITOR is always set
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:42 +0000 (15:24 -0500)]
staging: rtl8723au: ODM_BB_FA_CNT is always set
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:41 +0000 (15:24 -0500)]
staging: rtl8723au: ODM_BB_DYNAMIC_TXPWR isn't used for anything
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:40 +0000 (15:24 -0500)]
staging: rtl8723au: ODM_BB_DIG is always set
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:39 +0000 (15:24 -0500)]
staging: rtl8723au: ODM_BB_RA_MASK is always set
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:38 +0000 (15:24 -0500)]
staging: rtl8723au: ODM_MAC_EDCA_TURBO is always set
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:37 +0000 (15:24 -0500)]
staging: rtl8723au: Avoid zero initializing variables unnecessarily
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:36 +0000 (15:24 -0500)]
staging: rtl8723au: Variable bbtchange is always false
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Haneen Mohammed [Mon, 2 Mar 2015 18:38:22 +0000 (21:38 +0300)]
Staging: emxx_udc: Remove custom printk macro ERR
This patch removes custom printk macro ERR.
All the calls to this macro were replaced by de_err and pr_err.
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Haneen Mohammed [Mon, 2 Mar 2015 18:37:38 +0000 (21:37 +0300)]
Staging: emxx_udc: Replace custom printk macro ERR with dev_err or pr_err
This patch removes the use of custom printk macros ERR and replace it
with dev_err, or pr_err in the following cases:
- if no appropriate struct device *dev field where found for dev_err.
- or dev could be null eg. "dev_err(udc->dev" not possible inside "if
(udc == null)"
Issue addressed by checkpatch.pl.
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Haneen Mohammed [Mon, 2 Mar 2015 18:33:18 +0000 (21:33 +0300)]
Staging: emxx_udc: Remove argument test from function
This patch removes the test statement for an argument to _nbu2ss_pullup
function, for it can't be null due to previous derefrences.
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Haneen Mohammed [Mon, 2 Mar 2015 17:01:42 +0000 (20:01 +0300)]
Staging: emxx_udc: Fix do not add new typedefs and remove volatile
This patch fixes the following checkpatch.pl warnings:"do not add new
typedefs" and "Use of volatile is usually wrong".
Remove typedefs keyword and rename identifiers appropriately.
Remove volatile from union usb_regs_access
Update related files.
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dilek Uzulmez [Mon, 2 Mar 2015 21:28:14 +0000 (23:28 +0200)]
Staging: fbtft: Remove unnecessary 'out of memory' message.
This patch fixes checkpatch.pl warning in file fb_ssd1351.c
WARNING: Possible unnecessary 'out of memory' message
Signed-off-by: Dilek Uzulmez <dilekuzulmez@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dilek Uzulmez [Mon, 2 Mar 2015 20:56:53 +0000 (22:56 +0200)]
Staging: fbtft: Remove unnecessary 'out of memory' message.
This patch fixes checkpatch.pl warning in file fbtft-core.c
WARNING: Possible unnecessary 'out of memory' message
Signed-off-by: Dilek Uzulmez <dilekuzulmez@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yeliz Taneroglu [Mon, 2 Mar 2015 15:49:59 +0000 (17:49 +0200)]
Staging: fbtft-core: remove unnecessary line continuations
This fixes the checkpatch.pl warning:
WARNING: Avoid unnecessary line continuations
Signed-off-by: Yeliz Taneroglu <yeliztaneroglu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniele Alessandrelli [Sun, 22 Feb 2015 19:28:44 +0000 (20:28 +0100)]
staging: rtl8723au: rtl8723a_hal_init.c: remove unnecessary braces
Fix all checkpatch "braces {} are not necessary" warnings for
rtl8723au/hal/rtl8723a_hal_init.c
Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 27 Feb 2015 20:45:34 +0000 (15:45 -0500)]
staging: rtl8723au: MAX_AGGR_NUM is not used
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 27 Feb 2015 20:45:33 +0000 (15:45 -0500)]
staging: rtl8723au: The RF on an 8723au is always a 6052
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 27 Feb 2015 20:45:32 +0000 (15:45 -0500)]
staging: rtl8723au: Remove rf type from struct hal_version
This gets rid of yet another duplicated copy of the RF type
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 27 Feb 2015 20:45:31 +0000 (15:45 -0500)]
staging: rtl8723au: Be more consistent in checking for 2 TX paths
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 27 Feb 2015 20:45:30 +0000 (15:45 -0500)]
staging: rtl8723au: No need for two copies of rf_type
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 9 Feb 2015 22:52:21 +0000 (17:52 -0500)]
staging: rtl8723au: Firmware always handles adaptive rates
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 9 Feb 2015 22:52:20 +0000 (17:52 -0500)]
staging: rtl8723au: hal_com.h: Remove some unused #defines
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 9 Feb 2015 22:52:19 +0000 (17:52 -0500)]
staging: rtl8723au: Remove more unused #defines
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 9 Feb 2015 22:52:18 +0000 (17:52 -0500)]
staging: rtl8723au: rtl8723a_add_rateatid() simplyfy code
No point shifting raid right, just to shift it left again before
re-adding it.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 9 Feb 2015 22:52:17 +0000 (17:52 -0500)]
staging: rtl8723au: rates are always set via the firmware interface
The only case where fw_ractrl = false was when the firmware failed to
load, and in that case we are dead in the water anyway.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 9 Feb 2015 22:52:16 +0000 (17:52 -0500)]
staging: rtl8723au: Use RF_AC instead of hardcoded value for RF register write
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Tue, 3 Mar 2015 07:39:36 +0000 (02:39 -0500)]
staging/lustre/llite: Fix obd name after c&p error
commit
95745e9b1de2 ("staging: lustre: Use kasprintf.") introduced
a copy and paste error causing two different obd types to be assigned
same content causing lustre to fail on mount with a warning from procfs
followed by a bizzare error about OST not having enough MDS
capabilities.
This patch unbreaks Lustre client again.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
CC: Navya Sri Nizamkari <navyasri.tech@gmail.com>
CC: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joe Perches [Mon, 2 Mar 2015 03:58:57 +0000 (19:58 -0800)]
staging: lustre: Convert uses of "int rc = seq_printf(...)"
The seq_printf return value, because it's frequently misused,
will eventually be converted to void.
See: commit
1f33c41c03da ("seq_file: Rename seq_overflow() to
seq_has_overflowed() and make public")
Convert these uses to:
seq_printf(seq, ...);
return 0;
Done via cocci script:
@@
struct seq_file *seq;
int i;
@@
- i = seq_printf(seq,
+ seq_printf(seq,
...);
...
- return i;
+ return 0;
@@
struct seq_file *seq;
int i;
@@
- i = 0;
- i += seq_printf(seq,
+ seq_printf(seq,
...);
...
- return i;
+ return 0;
With some additional reformatting and typing post conversion
to remove the now unnecessary "int i;" declaration.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tolga Ceylan [Sun, 15 Feb 2015 04:32:45 +0000 (20:32 -0800)]
Staging: iio: meter:
ade7854-i2c: code style improvements
Code reformatting based on checkpatch.pl with --strict:
Comparison to NULL rewritten as !indio_dev
Signed-off-by: Tolga Ceylan <tolga.ceylan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tolga Ceylan [Sun, 15 Feb 2015 04:32:44 +0000 (20:32 -0800)]
Staging: iio: meter:
ade7854-i2c: code style improvements
Code reformatting based on checkpatch.pl with --strict:
Lines over 80 characters were fixed
Signed-off-by: Tolga Ceylan <tolga.ceylan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tolga Ceylan [Sun, 15 Feb 2015 04:32:43 +0000 (20:32 -0800)]
Staging: iio: meter:
ade7854-i2c: code style improvements
Code reformatting based on checkpatch.pl with --strict:
Alignment should match open paranthesis cases corrected
Signed-off-by: Tolga Ceylan <tolga.ceylan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 27 Feb 2015 15:07:37 +0000 (15:07 +0000)]
staging: comedi: adl_pci6208: support old PLX device ID
ADLINK's MS Windows drivers for the PCI-6208/6216 boards include the
following line in the DDInstall secion of the INF file:
%String6208%=DriverInstall6208.NT,PCI\VEN_10B5&DEV_9050&SUBSYS_62089999
That's for a PLX PCI 9050/9052 PCI interface chip with custom subvendor
and subdevice ID. The "%String6208%" macro expands to "ADLINK PCI-6208"
in the INF file.
Add a corresponding entry to this driver module's PCI device table.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 27 Feb 2015 15:07:36 +0000 (15:07 +0000)]
staging: comedi: adl_pci6208: remove multiple board type support
This driver module now only supports a single board type, so remove the
infrastructure for describing multiple board types. The comedi
"auto_attach" handler, `pci6208_auto_attach()` doesn't need to set the
comedi device's `board_name` or `board_ptr` members. The former is
automatically pointed to the comedi driver's `driver_name` by the core
comedi module, and the latter is not used anywhere else. The AO
subdevice's `n_chans` member can be set to 16 without looking it up in
the single element of `pci6208_boards[]`. There is no need to pass a
board index from the PCI device table to the "auto_attach" handler.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 27 Feb 2015 15:07:35 +0000 (15:07 +0000)]
staging: comedi: adl_pci6208: combine PCI-6208 and PCI-6216 support
This module's PCI device table has separate PCI device IDs for PCI-6208
and PCI-6216, but in reality, both boards and their cPCI and PCIe
variants seem to have the same PCI device ID: 0x6208. The PCI subdevice
ID doesn't seem to help either.
It shouldn't do any harm to claim 16 AO channels for all devices
supported by this driver. The original PCI-6216 is just a PCI-6208 with
a daughter board providing the extra DACs. The data is clocked out to
the DACs serially with no acknowledgment. I assume this would still
happen when the DACs for the upper 8 channels are missing. Therefore,
change the driver to support a single board type with 16 AO channels,
and remove the suspicious PCI device ID for the PCI-6216.
Evidence about lack of a separate PCI device ID for PCI-6216 follows....
1. Jesus Vasquez reports the following lspci output for a PCIe-6216 on
his Ubuntu 12.04 system:
lspci -n -vvv
07:00.0 1180: 144a:6208 (rev 02)
Subsystem: 144a:6208
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at
f6000000 (32-bit, non-prefetchable)
[size=128]
Region 1: I/O ports at c100 [size=128]
Region 2: I/O ports at c000 [size=256]
Kernel driver in use: adl_pci6208
Kernel modules: adl_pci6208
That system's "adl_pci6208" module only has the single PCI device ID for
the PCI-6208, but works for his PCIe-6216 except that it only supports 8
analog output channels instead of 16.
2. ADLINK's binary Linux module "pci6208.ko" (there is no separate
module for the PCI-6216) has a single alias:
alias: pci:v0000144Ad00006208sv*sd*bc*sc*i*
3. The MS Windows drivers include this set of hardware IDs for the
PCI-6208 series, with nothing more specific for the PCI-6216 (they are
all tied to the same name "ADLINK PCI-6208" and there is no mention of
PCI-6216):
PCI\VEN_10B5&DEV_9050&SUBSYS_62089999
PCI\VEN_144A&DEV_6208&SUBSYS_6208144A
PCI\VEN_144A&DEV_6208&SUBSYS_62089999
PCI\VEN_144A&DEV_6208&SUBSYS_C208144A
PCI\VEN_144A&DEV_6208&SUBSYS_C20855AA
PCI\VEN_144A&DEV_6208
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Thu, 26 Feb 2015 22:43:55 +0000 (15:43 -0700)]
staging: comedi: cb_pcimdas: add 8254 timer (pacer) support
The hardware has an 8254 timer/counter. Channe; 0 is available as a
generic counter/timer with the clock, gate, and output signals all
availabe on the main 37 pin connector. Channels 1 and 2 are used for
the pacer.
Add support for the 8254 timer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 25 Feb 2015 23:28:43 +0000 (16:28 -0700)]
staging: comedi: cb_pcimdas: add main connector digital input/output
Add subdevices for the 4 digital input and 4 digital output channels on
the main connector of the board.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 25 Feb 2015 23:28:42 +0000 (16:28 -0700)]
staging: comedi: cb_pcimdas: tidy up cb_pcimdas_auto_attach()
For aesthetics, add some whitespace to the subdevice init.
Remove the unnecessary comments as well as the initialization of the
analog input subdevice 'len_chanlist'. That member is only used by
subdevices that support async commands.
For aesthetics, rename the analog input subdevice (*insn_read) function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 25 Feb 2015 23:28:41 +0000 (16:28 -0700)]
staging: comedi: cb_pcimdas: provide analog output range table
The analog output range is not programmable. The DAC ranges are
jumper-settable on the board. For aesthetics, provide a range table
for the user with all possible ranges.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 25 Feb 2015 23:28:40 +0000 (16:28 -0700)]
staging: comedi: cb_pcimdas: define the register map
Add defines for the registers and bits. Use the defines to remove the
"magic" numbers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 25 Feb 2015 23:28:39 +0000 (16:28 -0700)]
staging: comedi: cb_pcimdas: support analog input programmable ranges
The hardware uses a switch on the board to select if the analog inputs
are bipolar or uinipolar. The gain is programmable to allow the following
input ranges:
Gain Bipolar Unipolar
0 +/-10V 0 to 10V
1 +/-5V 0 to 5V
2 +/-2.5V 0 to 2.5V
3 +/-1.25V 0 to 1.25V
Add the necessary code to the driver to allow the user to select the
desired range.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 25 Feb 2015 23:28:38 +0000 (16:28 -0700)]
staging: comedi: cb_pcimdas: fix analog input channel configuration
The hardware uses a switch on the board to set the number of analog
input channels to either 16 single-ended or 8 differential channels.
Currently the switch setting is checked for every (*insn_read) operation
to validate the channel number.
Check the switch setting during the driver attach and initialize the
subdevice accordingly. This allows the core to handle the validation.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 23 Feb 2015 21:58:03 +0000 (14:58 -0700)]
staging: comedi: 8253.h: remove unused header
All the comedi drivers have been converted to use the comedi_8254 module
to provide support for the 8254 timers. Remove this unused header.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 23 Feb 2015 21:58:02 +0000 (14:58 -0700)]
staging: comedi: ni_labpc_common: convert driver to use the comedi_8254 module
This driver uses an 8254 timer to generate the pacer clock used for analog
input data conversion. Convert it to use the comedi_8254 module to provide
support for the 8254 timer.
The hardware actually has two 8254 devices. Timer B0 is the master for timed
conversions, timer B1 sets the scan pacing, and tmer A0 sets the conversion
pacing.
For the conversion, dev->pacer is used for the "B" timers and a new private
data member, dev->counter, is used for the "A" timers. All the divisor values
are stored in the dev->pacer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Tue, 24 Feb 2015 17:38:49 +0000 (10:38 -0700)]
staging: comedi: amplc_dio200_common: convert driver to use the comedi_8254 module
Convert this driver to use the comedi_8254 module to provide the 8254 timer support.
Add 'clock_src' and 'gate_src' members to the comedi_8254 data for convienence.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 23 Feb 2015 21:58:00 +0000 (14:58 -0700)]
staging: comedi: amplc_dio200_common: remove 'spinlock' from struct dio200_subdev_8254
Currently this driver uses a spinlock in the 8254 subdevice (*insn_read), (*insn_write),
and (*insn_config) functions. The comedi core checks if the subdevice is 'busy', in
parse_insn(), before any of the subdevice functions are attempted.
Remove the unnecessary spinlock.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 23 Feb 2015 21:57:59 +0000 (14:57 -0700)]
staging: comedi: amplc_dio200_common: remove unnecessary 'counter_number' checks
The 'counter_number' in these functions is the comedi channel number from the
chanspec. The comedi core validates the chanspec before calling the driver
functions. Remove the unnecessary checks.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 23 Feb 2015 21:57:58 +0000 (14:57 -0700)]
staging: comedi: amplc_dio200_common: remove 'which' from struct dio200_subdev_8254
This member is only used in the "set gate" and "set clock" helper functions. Remove
it and calculate the value when needed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 23 Feb 2015 21:57:57 +0000 (14:57 -0700)]
staging: comedi: amplc_dio200_common: remove 'gat_sce_ofs' from struct dio200_subdev_8254
This member is only used one place in the driver. Remove it and calculate the
register offset when needed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 23 Feb 2015 21:57:56 +0000 (14:57 -0700)]
staging: comedi: amplc_dio200_common: remove 'clk_sce_ofs' from struct dio200_subdev_8254
This member is only used one place in the driver. Remove it and calculate the
register offset when needed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 23 Feb 2015 21:57:55 +0000 (14:57 -0700)]
staging: comedi: amplc_dio200_common: introduce DIO200_GAT_SEL() macro
Replace the DIO200_[XYZ]GAT_SEL defines with a macro that returns the
correct register offset.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 23 Feb 2015 21:57:54 +0000 (14:57 -0700)]
staging: comedi: amplc_dio200_common: introduce DIO200_CLK_SEL() macro
Replace the DIO200_[XYZ]CLK_SEL defines with a macro that returns the
correct register offset.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 23 Feb 2015 21:57:53 +0000 (14:57 -0700)]
staging: comedi: adl_pci9118: convert driver to use the comedi_8254 module
This driver uses an 8254 timer to generate the pacer clock used for analog
input data conversion. Convert it to use the comedi_8254 module to provide
support for the 8254 timer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 23 Feb 2015 21:57:52 +0000 (14:57 -0700)]
staging: comedi: das16: convert driver to use the comedi_8254 module
This driver uses an 8254 timer to generate the pacer clock used for analog
input data conversion. Convert it to use the comedi_8254 module to provide
support for the 8254 timer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 23 Feb 2015 21:57:51 +0000 (14:57 -0700)]
staging: comedi: cb_pcidas64: remove unnecessary include
The hardware supported by this driver does not have an 8254 timer. Remove the
unnecessary include of "8253.h".
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 23 Feb 2015 21:57:50 +0000 (14:57 -0700)]
staging: comedi: me4000: convert driver to use the comedi_8254 module
Some of the hardware supported by this driver include an 8254 timer. For
aesthetics, convert it to use the comedi_8254 module to provide support for
the 8254 timer.
This also fixes the (*insn_read) and (*insn_write) to work like the comedi
API expects. Currently they only read or write a single value.
It also fixes the (*insn_config). Currently the driver is attempting to
handle the configuration instructions GPCT_RESET and GPCT_SET_OPERATION.
These are just arbitrary valuse and are not real comedi configuration_ids.
They actually coorespond to:
GPCT_RESET -> INSN_CONFIG_DIO_OUTPUT
GPCT_SET_OPERATION -> INSN_CONFIG_ANALOG_TRIG
The number of parameters for the instructions is validated by the comedi
core in check_insn_config_length(). GPCT_RESET happens to work (insn->n == 1)
but GPCT_SET_OPERATION would fail. The INSN_CONFIG_ANALOG_TRIG expects
insn->n == 5 but GPCT_SET_OPERATION in this driver expects insn->n == 2.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 23 Feb 2015 21:57:49 +0000 (14:57 -0700)]
staging: comedi: adv_pci_dio: convert driver to use the comedi_8254 module
Some of the hardware supported by this driver includes an 8254 timer. For
aesthetics, convert it to use the comedi_8254 module to provide support for
the 8254 timer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 23 Feb 2015 21:57:48 +0000 (14:57 -0700)]
staging: comedi: adv_pci_dio: refactor 's8254' boardinfo
The boardinfo for the 8254 timer is overly complex. The 8254 timer always has
3 channels and the 'regs' and 'specflags' members of diosubd_data are not
used. The only necessary information is the base 'addr' offset to the 8254
registers.
Replace the 's8254' member with an unsigned long 'timer_regbase'. Use that
to determine if the board has an 8254 timer during the attach of the driver.
Save the 'timer_regbase' in the subdevice 'private' pointer to use in the
subdevice functions.
For aesthetics, absorb pci_dio_add_8254() into the driver attach function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 23 Feb 2015 21:57:47 +0000 (14:57 -0700)]
staging: comedi: adv_pci_dio: simplify counter subdevice I/O
Only two of the boards supported by this driver have an 8254 counter/timer.
Both of these boards have a single 8254 device. Currently the counter
subdevice functions are coded to support multiple 8254 devices. This is
unnecessary and just complicates the code.
Simplfy the subdevice functions to work for a single 8254 counter/timer and
refactor the driver (*attach) accordingly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 23 Feb 2015 21:57:46 +0000 (14:57 -0700)]
staging: comedi: das1800: convert driver to use the comedi_8254 module
This driver uses an 8254 timer to generate the pacer clock used for analog
input data conversion. Convert it to use the comedi_8254 module to provide
support for the 8254 timer.
Tidy up the (*do_cmdtest) validation of the timer arguments.
Absorb the converted das1800_setup_counters() code into the (*do_cmd).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 23 Feb 2015 21:57:45 +0000 (14:57 -0700)]
staging: comedi: das6402: convert driver to use the comedi_8254 module
This driver uses an 8254 timer to generate the pacer clock used for analog
input data conversion. Convert it to use the comedi_8254 module to provide
support for the 8254 timer.
Remove the unnecessary programming of timer 0. The private data 'count'
value is never set by the driver and the timer is reset to MODE0 when
the timers are initialized during the attach of the driver.
Remove the unnecessart convert_src check in the (*do_cmdtest). The only
valid convert_src is TRIG_TIMER.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 23 Feb 2015 21:57:44 +0000 (14:57 -0700)]
staging: comedi: ni_at_a2150: convert driver to use the comedi_8254 module
The hardware supported by this driver includes an 8254 timer. For aesthetics,
convert it to use the comedi_8254 module to provide support for the 8254 timer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 23 Feb 2015 21:57:43 +0000 (14:57 -0700)]
staging: comedi: ni_at_ao: convert driver to use the comedi_8254 module
The hardware supported by this driver includes an 8254 timer. This timer is
not currently used, other than setting counters 1 and 2 to MODE4 to ensure
that the outputs are high.
For aesthetics, convert it to use the comedi_8254 module to provide support
for the 8254 timer. This will make it easier to add features later.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Mon, 23 Feb 2015 21:57:42 +0000 (14:57 -0700)]
staging: comedi: das08: convert driver to use the comedi_8254 module
Some of the hardware supported by this driver include an 8254 timer that is
exposed to the user as a comedi_subdevice. Convert it to use the comedi_8254
module to provide support for the 8254 timer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>