git.osdn.net Git - tomoyo/tomoyo-test1.git/log

media: pci: tw68: Fix null-ptr-deref bug in buf prepare and finish

When the driver calls tw68_risc_buffer() to prepare the buffer, the
function call dma_alloc_coherent may fail, resulting in a empty buffer
buf->cpu. Later when we free the buffer or access the buffer, null ptr
deref is triggered.

This bug is similar to the following one:
https://git.linuxtv.org/media_stage.git/commit/?id=2b064d91440b33fba5b452f2d1b31f13ae911d71.

We believe the bug can be also dynamically triggered from user side.
Similarly, we fix this by checking the return value of tw68_risc_buffer()
and the value of buf->cpu before buffer free.

Signed-off-by: harperchen <harperchen1110@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: platform: via: Handle error for dma_set_mask

As the potential failure of the dma_set_mask(), we fix this
bug by checking its return value and performing proper error
handling.

Signed-off-by: harperchen <harperchen1110@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: MAINTAINERS: Add myself as CAMSS maintainer

I discussed with Robert a few ago lending a hand with CAMSS. Following up
on that discussion, I'm happy to help.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: cx23885: Fix a null-ptr-deref bug in buffer_prepare() and buffer_finish()

When the driver calls cx23885_risc_buffer() to prepare the buffer, the
function call dma_alloc_coherent may fail, resulting in a empty buffer
risc->cpu. Later when we free the buffer or access the buffer, null ptr
deref is triggered.

This bug is similar to the following one:
https://git.linuxtv.org/media_stage.git/commit/?id=2b064d91440b33fba5b452f2d1b31f13ae911d71.

We believe the bug can be also dynamically triggered from user side.
Similarly, we fix this by checking the return value of cx23885_risc_buffer()
and the value of risc->cpu before buffer free.

Signed-off-by: harperchen <harperchen1110@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: amphion: decoder implement display delay enable

amphion vpu support a low latency mode,
when V4L2_CID_MPEG_VIDEO_DEC_DISPLAY_DELAY_ENABLE is enabled,
decoder can display frame immediately after it's decoded.
Only h264 is support yet.

Fixes: 6de8d628df6e ("media: amphion: add v4l2 m2m vpu decoder stateful driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: platform: cros-ec: Add aurash to the match table

The Google aurash device uses the same approach as the Google Brask
which enables the HDMI CEC via the cros-ec-cec driver.

Signed-off-by: Zoey Wu <zoey_wu@wistron.corp-partner.google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: platform: mtk-mdp3: Add missing check and free for ida_alloc

Add the check for the return value of the ida_alloc in order to avoid
NULL pointer dereference.
Moreover, free allocated "ctx->id" if mdp_m2m_open fails later in order
to avoid memory leak.

Fixes: 61890ccaefaf ("media: platform: mtk-mdp3: add MediaTek MDP3 driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: platform: stm32: use devm_platform_get_and_ioremap_resource()

Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.

Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: platform: renesas: use devm_platform_get_and_ioremap_resource()

Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.

Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: dw100: use devm_platform_get_and_ioremap_resource()

Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.

Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn>
Reviewed-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: bdisp: Add missing check for create_workqueue

Add the check for the return value of the create_workqueue
in order to avoid NULL pointer dereference.

Fixes: 28ffeebbb7bd ("[media] bdisp: 2D blitter driver using v4l2 mem2mem framework")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: imx-jpeg: Bounds check sizeimage access

The call of mxc_jpeg_get_plane_size() from mxc_jpeg_dec_irq() sets
plane_no argument to 1. The compiler sees that it's possible to end up
with an access beyond the bounds of sizeimage, if mem_planes was too
large:

        if (plane_no >= fmt->mem_planes)        // mem_planes = 2+
                return 0;

        if (fmt->mem_planes == fmt->comp_planes) // comp_planes != mem_planes
                return q_data->sizeimage[plane_no];

        if (plane_no < fmt->mem_planes - 1)     // mem_planes = 2
                return q_data->sizeimage[plane_no];

comp_planes == 0 or 1 is safe. comp_planes > 2 would be out of bounds.

(This isn't currently possible given the contents of mxc_formats, though.)

Silence the warning by bounds checking comp_planes for future
robustness. Seen with GCC 13:

In function 'mxc_jpeg_get_plane_size',
    inlined from 'mxc_jpeg_dec_irq' at ../drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.c:729:14:
../drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.c:641:42: warning: array subscript 2 is above array bounds of 'u32[2]' {aka 'unsigned int[2]'} [-Warray-bounds=]
  641 |                 size += q_data->sizeimage[i];
      |                         ~~~~~~~~~~~~~~~~~^~~
In file included from ../drivers/media/platform/nxp/imx-jpeg/mxc-jpeg-hw.h:112,
                 from ../drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.c:63:
../drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.h: In function 'mxc_jpeg_dec_irq':
../drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.h:84:41: note: while referencing 'sizeimage'
   84 |         u32                             sizeimage[MXC_JPEG_MAX_PLANES];
      |                                         ^~~~~~~~~

Cc: Mirela Rabulea <mirela.rabulea@nxp.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: mxl5005s: Bounds check size used for max array index

The use of state->CH_Ctrl[i].size in a shift operation implies that its
value can be as much as 32, but the state->CH_Ctrl[i].val array is only
25 in size. Bounds check the size before shifting and looping. Fixes
warnings seen with GCC 13:

../drivers/media/tuners/mxl5005s.c: In function 'MXL_ControlWrite_Group.isra':
../drivers/media/tuners/mxl5005s.c:3450:70: warning: array subscript 32 is above array bounds of 'u16[25]' {aka 'short unsigned int[25]'} [-Warray-bounds=]
3450 | state->CH_Ctrl[i].val[j] = (u8)((value >> j) & 0x01);
      |  ~~~~~~~~~~~~~~~~~~~~~^~~
../drivers/media/tuners/mxl5005s.c:238:13: note: while referencing 'val'
  238 |         u16 val[25];    /* Binary representation of Value */
      |             ^~~

Cc: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: drop unnecessary networking includes

dvb_net.h includes a bunch of core networking headers which increases
the number of objects rebuilt when we touch them. They are unnecessary
for the header itself and only one driver has an indirect dependency.

tveeprom.h includes if_packet to gain access to ETH_ALEN. This
is a bit of an overkill because if_packet.h pulls in skbuff.h.
The definition of ETH_ALEN is in the uAPI header, which is
very rarely touched, so switch to including that.

This results in roughly 250 fewer objects built when skbuff.h
is touched (6028 -> 5788).

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: dvb-frontends: Fix a typo ("Unknow sleep mode")

Spell "unknown" correctly.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: dt-bindings: silabs,si470x: Convert to DT schema

Convert the Silicon Labs Si470x FM Radio Receiver bindings to DT schema.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: platform: exynos4-is: Fix spelling mistake "palne" -> "plane"

There are spelling mistakes in a literal string and a comment. Fix them.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: tc358746: Remove unneeded semicolon

./drivers/media/i2c/tc358746.c:857:3-4: Unneeded semicolon
./drivers/media/i2c/tc358746.c:861:2-3: Unneeded semicolon

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2832
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: rc: add Beelink Mini MXIII keymap

Add a keymap for the simple IR (NEC) remote used with the Beelink
Mini MXIII Android STB device.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: dt-bindings: rc: add rc-beelink-mxiii

Add a binding for the rc-beelink-mxiii remote keymap

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: rc: add common keymap for Dreambox RC10/RC0 and RC20/RC-BT remotes

Add a common keymap for the RC10/RC0 and RC20/RC-BT remotes used with
the Dreambox One and Dreambox Two DVB-S/T boxes. The maps are combined
since the IR codes do not conflict and both boxes have shipped with
both remote designs over time.

Both remote types can be programmed to control TVs, so include non-IR
keys that are used to switch-to or toggle the remote mode:

- DREAM in RC10/RC0 switches to (Dreambox) STB control mode
- TV in RC10/RC0 switches to TV control mode
- MODE in RC20/RC-BT toggles between STB/TV/BT control modes

In the RC20 keymap the Android MIC (voice search) key maps to KEY_HELP
and EXIT is mapped to KEY_ESC to replicate the go-backwards navigation
behaviour in the Android vendor OS that ships on Dreambox devices.

Signed-off-by: Emanuel Strobel <emanuel.strobel@yahoo.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: dt-bindings: rc: add rc-dreambox

Add a binding for the rc-dreambox remote keymap

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: cx18: fix format compliance issues

This properly fills in all the format fields and calculates the
width and height correctly.

Esp. the minimum width and height was wrong.

When changing the standard the width and height also have to be
reset to the corresponding default width/height for the chosen
standard.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: cx18: reorder fmt_vid_cap functions in cx18-ioctl.c

No actual code changed, this just reorders functions so that the
g/try/s_fmt_vid_cap functions are all together rather than mixed in
with the vbi format functions.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: cx18: missing CAP_AUDIO for vbi stream

The v4l2-compliance test complained about this. You can change the
input connector for the vbi stream, but that means that you can have to
be able to do the same for the audio input.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: cx18: properly report pixelformats

The MPEG device reported non-MPEG pixelformats, and the YUV device reported
the MPEG pixelformat as well.

Separate the two: either report MPEG or HM12/UYUV, not all three.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: cx18: fix incorrect input counting

Counting the number of video and audio inputs was wrong if the
number of inputs equalled CX18_CARD_MAX_VIDEO_INPUTS or
CX18_CARD_MAX_AUDIO_INPUTS. This was a copy-and-paste from the
ivtv driver. That driver has been fixed quite a long time ago,
but we missed that this driver had the same bug.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: cx18: convert to vb2

This patch converts cx18 from the old deprecated videobuf framework
to the 'new' vb2 framework.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: v4l2-dev.c: check for V4L2_CAP_STREAMING to enable streaming ioctls

Rather than checking which device type it is, just check the STREAMING
cap since that indicates support for streaming ioctls.

Some drivers only support READWRITE (typically MPEG encoders).

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: vb2: set owner before calling vb2_read

Before vb2_read is called, the owner must be set since vb2_read will
actually start streaming. If vb2_read returns an error and q->fileio is
NULL, then it failed to start streaming and the owner is set back to NULL.

When the vb2 start_streaming callback is called, it expects the owner
pointer to be set, and that wasn't the case in this particular situation.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: v4l: subdev: Make link validation safer

Link validation currently accesses invalid pointers if the link passed to
it is not between two sub-devices. This is of course a driver bug.

Ignore the error but print a warning message, as this is how it used to
work previously.

Fixes: a6b995ed03ff ("media: subdev: use streams in v4l2_subdev_link_validate()")
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: subdev: Fix validation state lockdep issue

The new subdev state code has a possible deadlock scenario during link
validation when the pipeline contains subdevs that support state and
that do not support state.

The current code locks the states of the subdevs on both ends of the
link when starting the link validation, locking the sink side first,
then the source. If either (or both) of the subdevs does not support
state, nothing is done for that subdev at this point, and instead the
locking is handled the old way, i.e. the subdev's ops do the locking
internally.

The issue arises when the sink doesn't support state, but source does,
so the validation code locks the source for the duration of the
validation, and then the sink is locked only when the get_fmt op is
called. So lockdep sees the source locked first, then the sink.

Later, when the streaming is started, the sink's s_stream op is called,
which probably takes the subdev's lock. The op then calls the source's
s_stream, which takes the source's lock. So, the sink is locked first,
then the source.

Note that link validation and stream starting is not done at the same
time, so an actual deadlock should never happen. However, it's still a
clear bug.

Fix this by locking the subdev states only if both subdevs support
state. In other words, we have two scenarios:

1. Both subdevs support state. Lock sink first, then source, and keep
   the locks while validating the link.
2. At least one of the subdevs do not support state. Take the lock only
   for the duration of the operation (get_fmt or looking at the
   routing), and release after the op is done.

Obviously 1. is better, as we have a more consistent view of the states
of the subdevs during validation. 2. is how it has been so far, so it's
no worse than this used to be.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: i2c: imx290: fix conditional function definitions

The runtime suspend/resume functions are only referenced from the
dev_pm_ops, but they use the old SET_RUNTIME_PM_OPS() helper
that requires a __maybe_unused annotation to avoid a warning:

drivers/media/i2c/imx290.c:1082:12: error: unused function 'imx290_runtime_resume' [-Werror,-Wunused-function]
static int imx290_runtime_resume(struct device *dev)
^
drivers/media/i2c/imx290.c:1090:12: error: unused function 'imx290_runtime_suspend' [-Werror,-Wunused-function]
static int imx290_runtime_suspend(struct device *dev)
^

Convert this to the new RUNTIME_PM_OPS() helper that so this
is not required. To improve this further, also use the pm_ptr()
helper that lets the dev_pm_ops get dropped entirely when
CONFIG_PM is disabled.

A related mistake happened in the of_match_ptr() macro here, which
like SET_RUNTIME_PM_OPS() requires the match table to be marked
as __maybe_unused, though I could not reproduce building this without
CONFIG_OF. Remove the of_match_ptr() here as there is no point in
dropping the match table in configurations without CONFIG_OF.

Fixes: 02852c01f654 ("media: i2c: imx290: Initialize runtime PM before subdev")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

media: Revert "venus: firmware: Correct non-pix start and end addresses"

This reverts commit a837e5161cfffbb3242cc0eb574f8bf65fd32640, which broke
probing of the venus driver, at least on the SC7180 SoC HP X2 Chromebook:

  [   11.455782] qcom-venus aa00000.video-codec: Adding to iommu group 11
  [   11.506980] qcom-venus aa00000.video-codec: non legacy binding
  [   12.143432] qcom-venus aa00000.video-codec: failed to reset venus core
  [   12.156440] qcom-venus: probe of aa00000.video-codec failed with error -110

Matthias Kaehlcke also reported that the same change caused a regression in
SC7180 and sc7280, that prevents AOSS from entering sleep mode during system
suspend. So let's revert this commit for now to fix both issues.

Fixes: a837e5161cff ("venus: firmware: Correct non-pix start and end addresses")
Reported-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

Linux 6.3-rc2

wifi: cfg80211: Partial revert "wifi: cfg80211: Fix use after free for wext"

This reverts part of commit 015b8cc5e7c4 ("wifi: cfg80211: Fix use after
free for wext")

This commit broke WPA offload by unconditionally clearing the crypto
modes for non-WEP connections. Drop that part of the patch.

Signed-off-by: Hector Martin <marcan@marcan.st>
Reported-by: Ilya <me@0upti.me>
Reported-and-tested-by: Janne Grunau <j@jannau.net>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Fixes: 015b8cc5e7c4 ("wifi: cfg80211: Fix use after free for wext")
Cc: stable@kernel.org
Link: https://lore.kernel.org/linux-wireless/ZAx0TWRBlGfv7pNl@kroah.com/T/#m11e6e0915ab8fa19ce8bc9695ab288c0fe018edf
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'tpm-v6.3-rc3' of git://git./linux/kernel/git/jarkko/linux-tpmdd

Pull tpm fixes from Jarkko Sakkinen:
"Two additional bug fixes for v6.3"

* tag 'tpm-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: disable hwrng for fTPM on some AMD designs
tpm/eventlog: Don't abort tpm_read_log on faulty ACPI address

tpm: disable hwrng for fTPM on some AMD designs

AMD has issued an advisory indicating that having fTPM enabled in
BIOS can cause "stuttering" in the OS.  This issue has been fixed
in newer versions of the fTPM firmware, but it's up to system
designers to decide whether to distribute it.

This issue has existed for a while, but is more prevalent starting
with kernel 6.1 because commit b006c439d58db ("hwrng: core - start
hwrng kthread also for untrusted sources") started to use the fTPM
for hwrng by default. However, all uses of /dev/hwrng result in
unacceptable stuttering.

So, simply disable registration of the defective hwrng when detecting
these faulty fTPM versions.  As this is caused by faulty firmware, it
is plausible that such a problem could also be reproduced by other TPM
interactions, but this hasn't been shown by any user's testing or reports.

It is hypothesized to be triggered more frequently by the use of the RNG
because userspace software will fetch random numbers regularly.

Intentionally continue to register other TPM functionality so that users
that rely upon PCR measurements or any storage of data will still have
access to it.  If it's found later that another TPM functionality is
exacerbating this problem a module parameter it can be turned off entirely
and a module parameter can be introduced to allow users who rely upon
fTPM functionality to turn it on even though this problem is present.

Link: https://www.amd.com/en/support/kb/faq/pa-410
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216989
Link: https://lore.kernel.org/all/20230209153120.261904-1-Jason@zx2c4.com/
Fixes: b006c439d58d ("hwrng: core - start hwrng kthread also for untrusted sources")
Cc: stable@vger.kernel.org
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Tested-by: reach622@mailcuk.com
Tested-by: Bell <1138267643@qq.com>
Co-developed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

tpm/eventlog: Don't abort tpm_read_log on faulty ACPI address

tpm_read_log_acpi() should return -ENODEV when no eventlog from the ACPI
table is found. If the firmware vendor includes an invalid log address
we are unable to map from the ACPI memory and tpm_read_log() returns -EIO
which would abort discovery of the eventlog.

Change the return value from -EIO to -ENODEV when acpi_os_map_iomem()
fails to map the event log.

The following hardware was used to test this issue:
    Framework Laptop (Pre-production)
    BIOS: INSYDE Corp, Revision: 3.2
    TPM Device: NTC, Firmware Revision: 7.2

Dump of the faulty ACPI TPM2 table:
    [000h 0000   4]                    Signature : "TPM2"    [Trusted Platform Module hardware interface Table]
    [004h 0004   4]                 Table Length : 0000004C
    [008h 0008   1]                     Revision : 04
    [009h 0009   1]                     Checksum : 2B
    [00Ah 0010   6]                       Oem ID : "INSYDE"
    [010h 0016   8]                 Oem Table ID : "TGL-ULT"
    [018h 0024   4]                 Oem Revision : 00000002
    [01Ch 0028   4]              Asl Compiler ID : "ACPI"
    [020h 0032   4]        Asl Compiler Revision : 00040000

    [024h 0036   2]               Platform Class : 0000
    [026h 0038   2]                     Reserved : 0000
    [028h 0040   8]              Control Address : 0000000000000000
    [030h 0048   4]                 Start Method : 06 [Memory Mapped I/O]

    [034h 0052  12]            Method Parameters : 00 00 00 00 00 00 00 00 00 00 00 00
    [040h 0064   4]           Minimum Log Length : 00010000
    [044h 0068   8]                  Log Address : 000000004053D000

Fixes: 0cf577a03f21 ("tpm: Fix handling of missing event log")
Tested-by: Erkki Eilonen <erkki@bearmetal.eu>
Signed-off-by: Morten Linderud <morten@linderud.pw>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

Merge tag 'xfs-6.3-fixes-1' of git://git./fs/xfs/xfs-linux

Pull xfs fixes from Darrick Wong:

- Fix a crash if mount time quotacheck fails when there are inodes
   queued for garbage collection.

- Fix an off by one error when discarding folios after writeback
   failure.

* tag 'xfs-6.3-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: fix off-by-one-block in xfs_discard_folio()
  xfs: quotacheck failure can race with background inode inactivation

Merge tag 'staging-6.3-rc2' of git://git./linux/kernel/git/gregkh/staging

Pull staging driver fixes and removal from Greg KH:
"Here are four small staging driver fixes, and one big staging driver
  deletion for 6.3-rc2.

  The fixes are:

   - rtl8192e driver fixes for where the driver was attempting to
     execute various programs directly from the disk for unknown reasons

   - rtl8723bs driver fixes for issues found by Hans in testing

  The deleted driver is the removal of the r8188eu wireless driver as
  now in 6.3-rc1 we have a "real" wifi driver for one that includes
  support for many many more devices than this old driver did. So it's
  time to remove it as it is no longer needed. The maintainers of this
  driver all have acked its removal. Many thanks to them over the years
  for working to clean it up and keep it working while the real driver
  was being developed.

  All of these have been in linux-next this week with no reported
  problems"

* tag 'staging-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: r8188eu: delete driver
  staging: rtl8723bs: Pass correct parameters to cfg80211_get_bss()
  staging: rtl8723bs: Fix key-store index handling
  staging: rtl8192e: Remove call_usermodehelper starting RadioPower.sh
  staging: rtl8192e: Remove function ..dm_check_ac_dc_power calling a script

Merge tag 'x86_urgent_for_v6.3_rc2' of git://git./linux/kernel/git/tip/tip

Pull x86 fix from Borislav Petkov:
"A single erratum fix for AMD machines:

   - Disable XSAVES on AMD Zen1 and Zen2 machines due to an erratum. No
     impact to anything as those machines will fallback to XSAVEC which
     is equivalent there"

* tag 'x86_urgent_for_v6.3_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/CPU/AMD: Disable XSAVES on AMD family 0x17

Merge tag 'kernel.fork.v6.3-rc2' of gitolite.pub/scm/linux/kernel/git/brauner/linux

Pull clone3 fix from Christian Brauner:
"A simple fix for the clone3() system call.

  The CLONE_NEWTIME allows the creation of time namespaces. The flag
  reuses a bit from the CSIGNAL bits that are used in the legacy clone()
  system call to set the signal that gets sent to the parent after the
  child exits.

  The clone3() system call doesn't rely on CSIGNAL anymore as it uses a
  dedicated .exit_signal field in struct clone_args. So we blocked all
  CSIGNAL bits in clone3_args_valid(). When CLONE_NEWTIME was introduced
  and reused a CSIGNAL bit we forgot to adapt clone3_args_valid()
  causing CLONE_NEWTIME with clone3() to be rejected. Fix this"

* tag 'kernel.fork.v6.3-rc2' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux:
  selftests/clone3: test clone3 with CLONE_NEWTIME
  fork: allow CLONE_NEWTIME in clone3 flags

Merge tag 'vfs.misc.v6.3-rc2' of git://git./linux/kernel/git/vfs/idmapping

Pull vfs fixes from Christian Brauner:

- When allocating pages for a watch queue failed, we didn't return an
   error causing userspace to proceed even though all subsequent
   notifcations would be lost. Make sure to return an error.

- Fix a misformed tree entry for the idmapping maintainers entry.

- When setting file leases from an idmapped mount via
   generic_setlease() we need to take the idmapping into account
   otherwise taking a lease would fail from an idmapped mount.

- Remove two redundant assignments, one in splice code and the other in
   locks code, that static checkers complained about.

* tag 'vfs.misc.v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
  filelocks: use mount idmapping for setlease permission check
  fs/locks: Remove redundant assignment to cmd
  splice: Remove redundant assignment to ret
  MAINTAINERS: repair a malformed T: entry in IDMAPPED MOUNTS
  watch_queue: fix IOC_WATCH_QUEUE_SET_SIZE alloc error paths

Merge tag 'ext4_for_linus_stable' of git://git./linux/kernel/git/tytso/ext4

Pull ext4 fixes from Ted Ts'o:
"Bug fixes and regressions for ext4, the most serious of which is a
  potential deadlock during directory renames that was introduced during
  the merge window discovered by a combination of syzbot and lockdep"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: zero i_disksize when initializing the bootloader inode
  ext4: make sure fs error flag setted before clear journal error
  ext4: commit super block if fs record error when journal record without error
  ext4, jbd2: add an optimized bmap for the journal inode
  ext4: fix WARNING in ext4_update_inline_data
  ext4: move where set the MAY_INLINE_DATA flag is set
  ext4: Fix deadlock during directory rename
  ext4: Fix comment about the 64BIT feature
  docs: ext4: modify the group desc size to 64
  ext4: fix another off-by-one fsmap error on 1k block filesystems
  ext4: fix RENAME_WHITEOUT handling for inline directories
  ext4: make kobj_type structures constant
  ext4: fix cgroup writeback accounting with fs-layer encryption

cpumask: relax sanity checking constraints

The cpumask_check() was unnecessarily tight, and causes problems for the
users of cpumask_next().

We have a number of users that take the previous return value of one of
the bit scanning functions and subtract one to keep it in "range".  But
since the scanning functions end up returning up to 'small_cpumask_bits'
instead of the tighter 'nr_cpumask_bits', the range really needs to be
using that widened form.

[ This "previous-1" behavior is also the reason we have all those
  comments about /* -1 is a legal arg here. */ and separate checks for
  that being ok.  So we could have just made "small_cpumask_bits-1"
  be a similar special "don't check this" value.

  Tetsuo Handa even suggested a patch that only does that for
  cpumask_next(), since that seems to be the only actual case that
  triggers, but that all makes it even _more_ magical and special. So
  just relax the check ]

One example of this kind of pattern being the 'c_start()' function in
arch/x86/kernel/cpu/proc.c, but also duplicated in various forms on
other architectures.

Reported-by: syzbot+96cae094d90877641f32@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=96cae094d90877641f32
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Link: https://lore.kernel.org/lkml/c1f4cc16-feea-b83c-82cf-1a1f007b7eb9@I-love.SAKURA.ne.jp/
Fixes: 596ff4a09b89 ("cpumask: re-introduce constant-sized cpumask optimizations")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'i2c-for-6.3-rc2' of git://git./linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:
"This marks the end of a transition to let I2C have the same probe
  semantics as other subsystems. Uwe took care that no drivers in the
  current tree nor in -next use the deprecated .probe call. So, it is a
  good time to switch to the new, standard semantics now.

  There is also a regression fix:

   - regression fix for the notifier handling of the I2C core

   - final coversions of drivers away from deprecated .probe

   - make .probe_new the standard probe and convert I2C core to use it

* tag 'i2c-for-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: dev: Fix bus callback return values
  i2c: Convert drivers to new .probe() callback
  i2c: mux: Convert all drivers to new .probe() callback
  i2c: Switch .probe() to not take an id parameter
  media: i2c: ov2685: convert to i2c's .probe_new()
  media: i2c: ov5695: convert to i2c's .probe_new()
  w1: ds2482: Convert to i2c's .probe_new()
  serial: sc16is7xx: Convert to i2c's .probe_new()
  mtd: maps: pismo: Convert to i2c's .probe_new()
  misc: ad525x_dpot-i2c: Convert to i2c's .probe_new()

ubi: block: Fix missing blk_mq_end_request

Switching to BLK_MQ_F_BLOCKING wrongly removed the call to
blk_mq_end_request(). Add it back to have our IOs finished

Fixes: 91cc8fbcc8c7 ("ubi: block: set BLK_MQ_F_BLOCKING")
Analyzed-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Daniel Palmer <daniel@0x0f.com>
Link: https://lore.kernel.org/linux-mtd/CAHk-=wi29bbBNh3RqJKu3PxzpjDN5D5K17gEVtXrb7-6bfrnMQ@mail.gmail.com/
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ext4: zero i_disksize when initializing the bootloader inode

If the boot loader inode has never been used before, the
EXT4_IOC_SWAP_BOOT inode will initialize it, including setting the
i_size to 0.  However, if the "never before used" boot loader has a
non-zero i_size, then i_disksize will be non-zero, and the
inconsistency between i_size and i_disksize can trigger a kernel
warning:

WARNING: CPU: 0 PID: 2580 at fs/ext4/file.c:319
CPU: 0 PID: 2580 Comm: bb Not tainted 6.3.0-rc1-00004-g703695902cfa
RIP: 0010:ext4_file_write_iter+0xbc7/0xd10
Call Trace:
  vfs_write+0x3b1/0x5c0
  ksys_write+0x77/0x160
  __x64_sys_write+0x22/0x30
  do_syscall_64+0x39/0x80

Reproducer:
1. create corrupted image and mount it:
       mke2fs -t ext4 /tmp/foo.img 200
       debugfs -wR "sif <5> size 25700" /tmp/foo.img
       mount -t ext4 /tmp/foo.img /mnt
       cd /mnt
       echo 123 > file
2. Run the reproducer program:
       posix_memalign(&buf, 1024, 1024)
       fd = open("file", O_RDWR | O_DIRECT);
       ioctl(fd, EXT4_IOC_SWAP_BOOT);
       write(fd, buf, 1024);

Fix this by setting i_disksize as well as i_size to zero when
initiaizing the boot loader inode.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217159
Cc: stable@kernel.org
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Link: https://lore.kernel.org/r/20230308032643.641113-1-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: make sure fs error flag setted before clear journal error

Now, jounral error number maybe cleared even though ext4_commit_super()
failed. This may lead to error flag miss, then fsck will miss to check
file system deeply.

Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230307061703.245965-3-yebin@huaweicloud.com

ext4: commit super block if fs record error when journal record without error

Now, 'es->s_state' maybe covered by recover journal. And journal errno
maybe not recorded in journal sb as IO error. ext4_update_super() only
update error information when 'sbi->s_add_error_count' large than zero.
Then 'EXT4_ERROR_FS' flag maybe lost.
To solve above issue just recover 'es->s_state' error flag after journal
replay like error info.

Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230307061703.245965-2-yebin@huaweicloud.com

ext4, jbd2: add an optimized bmap for the journal inode

The generic bmap() function exported by the VFS takes locks and does
checks that are not necessary for the journal inode. So allow the
file system to set a journal-optimized bmap function in
journal->j_bmap.

Reported-by: syzbot+9543479984ae9e576000@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=e4aaa78795e490421c79f76ec3679006c8ff4cf0
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: fix WARNING in ext4_update_inline_data

Syzbot found the following issue:
EXT4-fs (loop0): mounted filesystem 00000000-0000-0000-0000-000000000000 without journal. Quota mode: none.
fscrypt: AES-256-CTS-CBC using implementation "cts-cbc-aes-aesni"
fscrypt: AES-256-XTS using implementation "xts-aes-aesni"
------------[ cut here ]------------
WARNING: CPU: 0 PID: 5071 at mm/page_alloc.c:5525 __alloc_pages+0x30a/0x560 mm/page_alloc.c:5525
Modules linked in:
CPU: 1 PID: 5071 Comm: syz-executor263 Not tainted 6.2.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
RIP: 0010:__alloc_pages+0x30a/0x560 mm/page_alloc.c:5525
RSP: 0018:ffffc90003c2f1c0 EFLAGS: 00010246
RAX: ffffc90003c2f220 RBX: 0000000000000014 RCX: 0000000000000000
RDX: 0000000000000028 RSI: 0000000000000000 RDI: ffffc90003c2f248
RBP: ffffc90003c2f2d8 R08: dffffc0000000000 R09: ffffc90003c2f220
R10: fffff52000785e49 R11: 1ffff92000785e44 R12: 0000000000040d40
R13: 1ffff92000785e40 R14: dffffc0000000000 R15: 1ffff92000785e3c
FS:  0000555556c0d300(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f95d5e04138 CR3: 00000000793aa000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__alloc_pages_node include/linux/gfp.h:237 [inline]
alloc_pages_node include/linux/gfp.h:260 [inline]
__kmalloc_large_node+0x95/0x1e0 mm/slab_common.c:1113
__do_kmalloc_node mm/slab_common.c:956 [inline]
__kmalloc+0xfe/0x190 mm/slab_common.c:981
kmalloc include/linux/slab.h:584 [inline]
kzalloc include/linux/slab.h:720 [inline]
ext4_update_inline_data+0x236/0x6b0 fs/ext4/inline.c:346
ext4_update_inline_dir fs/ext4/inline.c:1115 [inline]
ext4_try_add_inline_entry+0x328/0x990 fs/ext4/inline.c:1307
ext4_add_entry+0x5a4/0xeb0 fs/ext4/namei.c:2385
ext4_add_nondir+0x96/0x260 fs/ext4/namei.c:2772
ext4_create+0x36c/0x560 fs/ext4/namei.c:2817
lookup_open fs/namei.c:3413 [inline]
open_last_lookups fs/namei.c:3481 [inline]
path_openat+0x12ac/0x2dd0 fs/namei.c:3711
do_filp_open+0x264/0x4f0 fs/namei.c:3741
do_sys_openat2+0x124/0x4e0 fs/open.c:1310
do_sys_open fs/open.c:1326 [inline]
__do_sys_openat fs/open.c:1342 [inline]
__se_sys_openat fs/open.c:1337 [inline]
__x64_sys_openat+0x243/0x290 fs/open.c:1337
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

Above issue happens as follows:
ext4_iget
   ext4_find_inline_data_nolock ->i_inline_off=164 i_inline_size=60
ext4_try_add_inline_entry
   __ext4_mark_inode_dirty
      ext4_expand_extra_isize_ea ->i_extra_isize=32 s_want_extra_isize=44
         ext4_xattr_shift_entries
->after shift i_inline_off is incorrect, actually is change to 176
ext4_try_add_inline_entry
  ext4_update_inline_dir
    get_max_inline_xattr_value_size
      if (EXT4_I(inode)->i_inline_off)
entry = (struct ext4_xattr_entry *)((void *)raw_inode +
EXT4_I(inode)->i_inline_off);
        free += EXT4_XATTR_SIZE(le32_to_cpu(entry->e_value_size));
->As entry is incorrect, then 'free' may be negative
   ext4_update_inline_data
      value = kzalloc(len, GFP_NOFS);
      -> len is unsigned int, maybe very large, then trigger warning when
         'kzalloc()'

To resolve the above issue we need to update 'i_inline_off' after
'ext4_xattr_shift_entries()'.  We do not need to set
EXT4_STATE_MAY_INLINE_DATA flag here, since ext4_mark_inode_dirty()
already sets this flag if needed.  Setting EXT4_STATE_MAY_INLINE_DATA
when it is needed may trigger a BUG_ON in ext4_writepages().

Reported-by: syzbot+d30838395804afc2fa6f@syzkaller.appspotmail.com
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230307015253.2232062-3-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: move where set the MAY_INLINE_DATA flag is set

The only caller of ext4_find_inline_data_nolock() that needs setting of
EXT4_STATE_MAY_INLINE_DATA flag is ext4_iget_extra_inode(). In
ext4_write_inline_data_end() we just need to update inode->i_inline_off.
Since we are going to add one more caller that does not need to set
EXT4_STATE_MAY_INLINE_DATA, just move setting of EXT4_STATE_MAY_INLINE_DATA
out to ext4_iget_extra_inode().

Signed-off-by: Ye Bin <yebin10@huawei.com>
Cc: stable@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230307015253.2232062-2-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
"Twenty fixes all in drivers except the one zone storage revalidation
  fix to sd.

  The megaraid_sas fixes are more on the level of a driver update
  (enabling crash dump and increasing lun number) but I thought you
  could let this slide on -rc1 and the next most extensive update is a
  load of fixes to mpi3mr"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: sd: Fix wrong zone_write_granularity value during revalidate
  scsi: storvsc: Handle BlockSize change in Hyper-V VHD/VHDX file
  scsi: megaraid_sas: Driver version update to 07.725.01.00-rc1
  scsi: megaraid_sas: Add crash dump mode capability bit in MFI capabilities
  scsi: megaraid_sas: Update max supported LD IDs to 240
  scsi: mpi3mr: Bad drive in topology results kernel crash
  scsi: mpi3mr: NVMe command size greater than 8K fails
  scsi: mpi3mr: Return proper values for failures in firmware init path
  scsi: mpi3mr: Wait for diagnostic save during controller init
  scsi: mpi3mr: Driver unload crashes host when enhanced logging is enabled
  scsi: mpi3mr: ioctl timeout when disabling/enabling interrupt
  scsi: lpfc: Avoid usage of list iterator variable after loop
  scsi: lpfc: Check kzalloc() in lpfc_sli4_cgn_params_read()
  scsi: ufs: mcq: qcom: Clean the return path of ufs_qcom_mcq_config_resource()
  scsi: ufs: mcq: qcom: Fix passing zero to PTR_ERR
  scsi: ufs: ufs-qcom: Remove impossible check
  scsi: ufs: core: Add soft dependency on governor_simpleondemand
  scsi: hisi_sas: Check devm_add_action() return value
  scsi: qla2xxx: Add option to disable FC2 Target support
  scsi: target: iscsi: Fix an error message in iscsi_check_key()

Merge tag 'block-6.3-2023-03-09' of git://git.kernel.dk/linux

Pull block fixes from Jens Axboe:

- Fix a regression in exclusive mode handling of the partition code,
   introduced in this merge windoe (Yu)

- Fix for a use-after-free in BFQ (Yu)

- Add sysfs documentation for the 'hidden' attribute (Sagi)

* tag 'block-6.3-2023-03-09' of git://git.kernel.dk/linux:
  block, bfq: fix uaf for 'stable_merge_bfqq'
  docs: sysfs-block: document hidden sysfs entry
  block: fix wrong mode for blkdev_put() from disk_scan_partitions()

Merge tag 'pull-highmem' of git://git./linux/kernel/git/viro/vfs

Pull put_and_unmap_page() helper from Al Viro:
"kmap_local_page() conversions in local filesystems keep running into
  kunmap_local_page()+put_page() combinations.  We can keep inventing
  names for identical inline helpers, but it's getting rather
  inconvenient. I've added a trivial helper to linux/highmem.h instead.

  I would've held that back until the merge window, if not for the mess
  it causes in tree topology - I've several branches merging from that
  one, and it's only going to get worse if e.g. ext2 stuff gets picked
  by Jan"

* tag 'pull-highmem' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  new helper: put_and_unmap_page()

Merge tag 'pull-fixes' of git://git./linux/kernel/git/viro/vfs

Pull misc fixes from Al Viro:
"pick_file() speculation fix + fix for alpha mis(merge,cherry-pick)

  The fs/file.c one is a genuine missing speculation barrier in
  pick_file() (reachable e.g. via close(2)). The alpha one is strictly
  speaking not a bug fix, but only because confusion between
  preempt_enable() and preempt_disable() is harmless on architecture
  without CONFIG_PREEMPT.

  Looks like alpha.git picked the wrong version of patch - that braino
  used to be there in early versions, but it had been fixed quite a
  while ago..."

* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs: prevent out-of-bounds array speculation when closing a file descriptor
  alpha: fix lazy-FPU mis(merged/applied/whatnot)

Merge tag 'thermal-6.3-rc2' of git://git./linux/kernel/git/rafael/linux-pm

Pull thermal control fix from Rafael Wysocki:
"Fix a recently introduced deadlock in the int340x thermal control
driver (Srinivas Pandruvada)"

* tag 'thermal-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: intel: int340x: processor_thermal: Fix deadlock

Merge tag 'riscv-for-linus-6.3-rc2' of git://git./linux/kernel/git/riscv/linux

Pull RISC-V fixes from Palmer Dabbelt:

- RISC-V architecture-specific ELF attributes have been disabled in the
   kernel builds

- A fix for a locking failure while during errata patching that
   manifests on SiFive-based systems

- A fix for a KASAN failure during stack unwinding

- A fix for some lockdep failures during text patching

* tag 'riscv-for-linus-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: Don't check text_mutex during stop_machine
  riscv: Use READ_ONCE_NOCHECK in imprecise unwinding stack mode
  RISC-V: fix taking the text_mutex twice during sifive errata patching
  RISC-V: Stop emitting attributes

Merge tag 'drm-fixes-2023-03-10' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"Weekly fixes.

  msm and amdgpu are the vast majority of these, otherwise some
  straggler misc from last week for nouveau and cirrus and a mailmap
  update for a drm developer.

  mailmap:
   - add an entry

  nouveau:
   - fix system shutdown regression
   - build warning fix

  cirrus:
   - NULL ptr deref fix

  msm:
   - fix invalid ptr free in syncobj cleanup
   - sync GMU removal in teardown
   - a5xx preemption fixes
   - fix runpm imbalance
   - DPU hw fixes
   - stack corruption fix
   - clear DSPP reservation

  amdgpu:
   - Misc display fixes
   - UMC 8.10 fixes
   - Driver unload fixes
   - NBIO 7.3.0 fix
   - Error checking fixes for soc15, nv, soc21 read register interface
   - Fix video cap query for VCN 4.0.4

  amdkfd:
   - Fix return check in doorbell handling"

* tag 'drm-fixes-2023-03-10' of git://anongit.freedesktop.org/drm/drm: (42 commits)
  drm/amdgpu/soc21: Add video cap query support for VCN_4_0_4
  drm/amdgpu: fix error checking in amdgpu_read_mm_registers for nv
  drm/amdgpu: fix error checking in amdgpu_read_mm_registers for soc21
  drm/amdgpu: fix error checking in amdgpu_read_mm_registers for soc15
  drm/amdgpu: Fix the warning info when removing amdgpu device
  drm/amdgpu: fix return value check in kfd
  drm/amd: Fix initialization mistake for NBIO 7.3.0
  drm/amdgpu: Fix call trace warning and hang when removing amdgpu device
  mailmap: add mailmap entries for Faith.
  drm/msm: DEVFREQ_GOV_SIMPLE_ONDEMAND is no longer needed
  drm/amd/display: Update clock table to include highest clock setting
  drm/amd/pm: Enable ecc_info table support for smu v13_0_10
  drm/amdgpu: Support umc node harvest config on umc v8_10
  drm/connector: print max_requested_bpc in state debugfs
  drm/display: Don't block HDR_OUTPUT_METADATA on unknown EOTF
  drm/msm/dpu: clear DSPP reservations in rm release
  drm/msm/disp/dpu: fix sc7280_pp base offset
  drm/msm/dpu: fix stack smashing in dpu_hw_ctl_setup_blendstage
  drm/msm/dpu: don't use DPU_CLK_CTRL_CURSORn for DMA SSPP clocks
  drm/msm/dpu: fix clocks settings for msm8998 SSPP blocks
  ...

Merge tag 'erofs-for-6.3-rc2-fixes' of git://git./linux/kernel/git/xiang/erofs

Pull erofs fixes from Gao Xiang:
"The most important one reverts an improper fix which can cause an
  unexpected warning more often on specific images, and another one
  fixes LZMA decompression on 32-bit platforms. The others are minor
  fixes and cleanups.

   - Fix LZMA decompression failure on HIGHMEM platforms

   - Revert an inproper fix since it is actually an implementation issue
     of vmalloc()

   - Avoid a wrong DBG_BUGON since it could be triggered with -EINTR

   - Minor cleanups"

* tag 'erofs-for-6.3-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: use wrapper i_blocksize() in erofs_file_read_iter()
  erofs: get rid of a useless DBG_BUGON
  erofs: Revert "erofs: fix kvcalloc() misuse with __GFP_NOFAIL"
  erofs: fix wrong kunmap when using LZMA on HIGHMEM platforms
  erofs: mark z_erofs_lzma_init/erofs_pcpubuf_init w/ __init

Merge tag 'nfsd-6.3-2' of git://git./linux/kernel/git/cel/linux

Pull nfsd fixes from Chuck Lever:

- Protect NFSD writes against filesystem freezing

- Fix a potential memory leak during server shutdown

* tag 'nfsd-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
SUNRPC: Fix a server shutdown leak
NFSD: Protect against filesystem freezing

Merge tag 'for-6.3-rc1-tag' of git://git./linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
"First batch of fixes. Among them there are two updates to sysfs and
  ioctl which are not strictly fixes but are used for testing so there's
  no reason to delay them.

   - fix block group item corruption after inserting new block group

   - fix extent map logging bit not cleared for split maps after
     dropping range

   - fix calculation of unusable block group space reporting bogus
     values due to 32/64b division

   - fix unnecessary increment of read error stat on write error

   - improve error handling in inode update

   - export per-device fsid in DEV_INFO ioctl to distinguish seeding
     devices, needed for testing

   - allocator size classes:
      - fix potential dead lock in size class loading logic
      - print sysfs stats for the allocation classes"

* tag 'for-6.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix block group item corruption after inserting new block group
  btrfs: fix extent map logging bit not cleared for split maps after dropping range
  btrfs: fix percent calculation for bg reclaim message
  btrfs: fix unnecessary increment of read error stat on write error
  btrfs: handle btrfs_del_item errors in __btrfs_update_delayed_inode
  btrfs: ioctl: return device fsid from DEV_INFO ioctl
  btrfs: fix potential dead lock in size class loading logic
  btrfs: sysfs: add size class stats

Merge tag 'io_uring-6.3-2023-03-09' of git://git.kernel.dk/linux

Pull io_uring fixes from Jens Axboe:

- Stop setting PF_NO_SETAFFINITY on io-wq workers.

   This has been reported in the past as it confuses some applications,
   as some of their threads will fail with -1/EINVAL if attempted
   affinitized. Most recent report was on cpusets, where enabling that
   with io-wq workers active will fail.

   Just deal with the mask changing by checking when a worker times out,
   and then exit if we have no work pending.

- Fix an issue with passthrough support where we don't properly check
   if the file type has pollable uring_cmd support.

- Fix a reported W=1 warning on a variable being set and unused. Add a
   special helper for iterating these lists that doesn't save the
   previous list element, if that iterator never ends up using it.

* tag 'io_uring-6.3-2023-03-09' of git://git.kernel.dk/linux:
  io_uring: silence variable ‘prev’ set but not used warning
  io_uring/uring_cmd: ensure that device supports IOPOLL
  io_uring/io-wq: stop setting PF_NO_SETAFFINITY on io-wq workers

Merge tag 'perf-tools-fixes-for-v6.3-1-2023-03-09' of git://git./linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

- Add Adrian Hunter to MAINTAINERS as a perf tools reviewer

- Sync various tools/ copies of kernel headers with the kernel sources,
   this time trying to avoid first merging with upstream to then update
   but instead copy from upstream so that a merge is avoided and the end
   result after merging this pull request is the one expected,
   tools/perf/check-headers.sh (mostly) happy, less warnings while
   building tools/perf/

- Fix counting when initial delay configured by setting
   perf_attr.enable_on_exec when starting workloads from the perf
   command line

- Don't avoid emitting a PERF_RECORD_MMAP2 in 'perf inject
   --buildid-all' when that record comes with a build-id, otherwise we
   end up not being able to resolve symbols

- Don't use comma as the CSV output separator the "stat+csv_output"
   test, as comma can appear on some tests as a modifier for an event,
   use @ instead, ditto for the JSON linter test

- The offcpu test was looking for some bits being set on
   task_struct->prev_state without masking other bits not important for
   this specific 'perf test', fix it

* tag 'perf-tools-fixes-for-v6.3-1-2023-03-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf tools: Add Adrian Hunter to MAINTAINERS as a reviewer
  tools headers UAPI: Sync linux/perf_event.h with the kernel sources
  tools headers x86 cpufeatures: Sync with the kernel sources
  tools include UAPI: Sync linux/vhost.h with the kernel sources
  tools arch x86: Sync the msr-index.h copy with the kernel sources
  tools headers kvm: Sync uapi/{asm/linux} kvm.h headers with the kernel sources
  tools include UAPI: Synchronize linux/fcntl.h with the kernel sources
  tools headers: Synchronize {linux,vdso}/bits.h with the kernel sources
  tools headers UAPI: Sync linux/prctl.h with the kernel sources
  tools headers: Update the copy of x86's mem{cpy,set}_64.S used in 'perf bench'
  perf stat: Fix counting when initial delay configured
  tools headers svm: Sync svm headers with the kernel sources
  perf test: Avoid counting commas in json linter
  perf tests stat+csv_output: Switch CSV separator to @
  perf inject: Fix --buildid-all not to eat up MMAP2
  tools arch x86: Sync the msr-index.h copy with the kernel sources
  perf test: Fix offcpu test prev_state check

Merge tag 'amd-drm-fixes-6.3-2023-03-09' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.3-2023-03-09:

amdgpu:
- Misc display fixes
- UMC 8.10 fixes
- Driver unload fixes
- NBIO 7.3.0 fix
- Error checking fixes for soc15, nv, soc21 read register interface
- Fix video cap query for VCN 4.0.4

amdkfd:
- Fix return check in doorbell handling

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230310031314.1296929-1-alexander.deucher@amd.com

fs: prevent out-of-bounds array speculation when closing a file descriptor

Google-Bug-Id: 114199369
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

drm/amdgpu/soc21: Add video cap query support for VCN_4_0_4

Added the video capability query support for VCN version 4_0_4

Signed-off-by: Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x

drm/amdgpu: fix error checking in amdgpu_read_mm_registers for nv

Properly skip non-existent registers as well.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2442
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amdgpu: fix error checking in amdgpu_read_mm_registers for soc21

Properly skip non-existent registers as well.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2442
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amdgpu: fix error checking in amdgpu_read_mm_registers for soc15

Properly skip non-existent registers as well.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2442
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amdgpu: Fix the warning info when removing amdgpu device

Actually, the drm_dev_enter in psp_cmd_submit_buf does not
protect anything. If DRM device is unplugged, it will always
check the condition in WARN_ON. So drop drm_dev_enter and
drm_dev_exit in psp_cmd_submit_buf.

When removing amdgpu, the calling order is as follows:
amdgpu_pci_remove
    drm_dev_unplug
    amdgpu_driver_unload_kms
        amdgpu_device_fini_hw
            amdgpu_device_ip_fini_early
                psp_hw_fini
                    psp_ras_terminate
                        psp_ta_unloadye
                            psp_cmd_submit_buf

[ 4507.740388] Call Trace:
[ 4507.740389]  <TASK>
[ 4507.740391]  psp_ta_unload+0x44/0x70 [amdgpu]
[ 4507.740485]  psp_ras_terminate+0x4d/0x70 [amdgpu]
[ 4507.740575]  psp_hw_fini+0x28/0xa0 [amdgpu]
[ 4507.740662]  amdgpu_device_fini_hw+0x328/0x442 [amdgpu]
[ 4507.740791]  amdgpu_driver_unload_kms+0x51/0x60 [amdgpu]
[ 4507.740875]  amdgpu_pci_remove+0x5a/0x140 [amdgpu]
[ 4507.740962]  ? _raw_spin_unlock_irqrestore+0x27/0x43
[ 4507.740965]  ? __pm_runtime_resume+0x60/0x90
[ 4507.740968]  pci_device_remove+0x39/0xb0
[ 4507.740971]  device_remove+0x46/0x70
[ 4507.740972]  device_release_driver_internal+0xd1/0x160
[ 4507.740974]  driver_detach+0x4a/0x90
[ 4507.740975]  bus_remove_driver+0x6c/0xf0
[ 4507.740976]  driver_unregister+0x31/0x50
[ 4507.740977]  pci_unregister_driver+0x40/0x90
[ 4507.740978]  amdgpu_exit+0x15/0x120 [amdgpu]

v2: fix commit message style issue

Signed-off-by: lyndonli <Lyndon.Li@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix return value check in kfd

This patch fixes a return value check in kfd doorbell handling.
This function should return 0(error) only when the ida_simple_get
returns < 0(error), return > 0 is a success case.

Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Fixes: 16f0013157bf ("drm/amdkfd: Allocate doorbells only when needed")
Acked-by: Christian Koenig <chriatian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Fix initialization mistake for NBIO 7.3.0

The same strapping initialization issue that happened on NBIO 7.5.1
appears to be happening on NBIO 7.3.0.
Apply the same fix to 7.3.0 as well.

Note: This workaround relies upon the integrated GPU being enabled
in BIOS. If the integrated GPU is disabled in BIOS a different
workaround will be required.

Reported-by: Thomas Glanzmann <thomas@glanzmann.de>
Cc: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Link: https://lore.kernel.org/linux-usb/Y%2Fz9GdHjPyF2rNG3@glanzmann.de/T/#u
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix call trace warning and hang when removing amdgpu device

On GPUs with RAS enabled, below call trace and hang are observed when
shutting down device.

v2: use DRM device unplugged flag instead of shutdown flag as the check to
prevent memory wipe in shutdown stage.

[ +0.000000] RIP: 0010:amdgpu_vram_mgr_fini+0x18d/0x1c0 [amdgpu]
[ +0.000001] PKRU: 55555554
[ +0.000001] Call Trace:
[ +0.000001] <TASK>
[ +0.000002] amdgpu_ttm_fini+0x140/0x1c0 [amdgpu]
[ +0.000183] amdgpu_bo_fini+0x27/0xa0 [amdgpu]
[ +0.000184] gmc_v11_0_sw_fini+0x2b/0x40 [amdgpu]
[ +0.000163] amdgpu_device_fini_sw+0xb6/0x510 [amdgpu]
[ +0.000152] amdgpu_driver_release_kms+0x16/0x30 [amdgpu]
[ +0.000090] drm_dev_release+0x28/0x50 [drm]
[ +0.000016] devm_drm_dev_init_release+0x38/0x60 [drm]
[ +0.000011] devm_action_release+0x15/0x20
[ +0.000003] release_nodes+0x40/0xc0
[ +0.000001] devres_release_all+0x9e/0xe0
[ +0.000001] device_unbind_cleanup+0x12/0x80
[ +0.000003] device_release_driver_internal+0xff/0x160
[ +0.000001] driver_detach+0x4a/0x90
[ +0.000001] bus_remove_driver+0x6c/0xf0
[ +0.000001] driver_unregister+0x31/0x50
[ +0.000001] pci_unregister_driver+0x40/0x90
[ +0.000003] amdgpu_exit+0x15/0x120 [amdgpu]

Signed-off-by: lyndonli <Lyndon.Li@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

RISC-V: Don't check text_mutex during stop_machine

We're currently using stop_machine() to update ftrace & kprobes, which
means that the thread that takes text_mutex during may not be the same
as the thread that eventually patches the code. This isn't actually a
race because the lock is still held (preventing any other concurrent
accesses) and there is only one thread running during stop_machine(),
but it does trigger a lockdep failure.

This patch just elides the lockdep check during stop_machine.

Fixes: c15ac4fd60d5 ("riscv/ftrace: Add dynamic function tracer support")
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Reported-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230303143754.4005217-1-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: Use READ_ONCE_NOCHECK in imprecise unwinding stack mode

When CONFIG_FRAME_POINTER is unset, the stack unwinding function
walk_stackframe randomly reads the stack and then, when KASAN is enabled,
it can lead to the following backtrace:

[    0.000000] ==================================================================
[    0.000000] BUG: KASAN: stack-out-of-bounds in walk_stackframe+0xa6/0x11a
[    0.000000] Read of size 8 at addr ffffffff81807c40 by task swapper/0
[    0.000000]
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.2.0-12919-g24203e6db61f #43
[    0.000000] Hardware name: riscv-virtio,qemu (DT)
[    0.000000] Call Trace:
[    0.000000] [<ffffffff80007ba8>] walk_stackframe+0x0/0x11a
[    0.000000] [<ffffffff80099ecc>] init_param_lock+0x26/0x2a
[    0.000000] [<ffffffff80007c4a>] walk_stackframe+0xa2/0x11a
[    0.000000] [<ffffffff80c49c80>] dump_stack_lvl+0x22/0x36
[    0.000000] [<ffffffff80c3783e>] print_report+0x198/0x4a8
[    0.000000] [<ffffffff80099ecc>] init_param_lock+0x26/0x2a
[    0.000000] [<ffffffff80007c4a>] walk_stackframe+0xa2/0x11a
[    0.000000] [<ffffffff8015f68a>] kasan_report+0x9a/0xc8
[    0.000000] [<ffffffff80007c4a>] walk_stackframe+0xa2/0x11a
[    0.000000] [<ffffffff80007c4a>] walk_stackframe+0xa2/0x11a
[    0.000000] [<ffffffff8006e99c>] desc_make_final+0x80/0x84
[    0.000000] [<ffffffff8009a04e>] stack_trace_save+0x88/0xa6
[    0.000000] [<ffffffff80099fc2>] filter_irq_stacks+0x72/0x76
[    0.000000] [<ffffffff8006b95e>] devkmsg_read+0x32a/0x32e
[    0.000000] [<ffffffff8015ec16>] kasan_save_stack+0x28/0x52
[    0.000000] [<ffffffff8006e998>] desc_make_final+0x7c/0x84
[    0.000000] [<ffffffff8009a04a>] stack_trace_save+0x84/0xa6
[    0.000000] [<ffffffff8015ec52>] kasan_set_track+0x12/0x20
[    0.000000] [<ffffffff8015f22e>] __kasan_slab_alloc+0x58/0x5e
[    0.000000] [<ffffffff8015e7ea>] __kmem_cache_create+0x21e/0x39a
[    0.000000] [<ffffffff80e133ac>] create_boot_cache+0x70/0x9c
[    0.000000] [<ffffffff80e17ab2>] kmem_cache_init+0x6c/0x11e
[    0.000000] [<ffffffff80e00fd6>] mm_init+0xd8/0xfe
[    0.000000] [<ffffffff80e011d8>] start_kernel+0x190/0x3ca
[    0.000000]
[    0.000000] The buggy address belongs to stack of task swapper/0
[    0.000000]  and is located at offset 0 in frame:
[    0.000000]  stack_trace_save+0x0/0xa6
[    0.000000]
[    0.000000] This frame has 1 object:
[    0.000000]  [32, 56) 'c'
[    0.000000]
[    0.000000] The buggy address belongs to the physical page:
[    0.000000] page:(____ptrval____) refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x81a07
[    0.000000] flags: 0x1000(reserved|zone=0)
[    0.000000] raw: 0000000000001000 ff600003f1e3d150 ff600003f1e3d150 0000000000000000
[    0.000000] raw: 0000000000000000 0000000000000000 00000001ffffffff
[    0.000000] page dumped because: kasan: bad access detected
[    0.000000]
[    0.000000] Memory state around the buggy address:
[    0.000000]  ffffffff81807b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    0.000000]  ffffffff81807b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    0.000000] >ffffffff81807c00: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 00 00 f3
[    0.000000]                                            ^
[    0.000000]  ffffffff81807c80: f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00
[    0.000000]  ffffffff81807d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    0.000000] ==================================================================

Fix that by using READ_ONCE_NOCHECK when reading the stack in imprecise
mode.

Fixes: 5d8544e2d007 ("RISC-V: Generic library routines and assembly")
Reported-by: Chathura Rajapaksha <chathura.abeyrathne.lk@gmail.com>
Link: https://lore.kernel.org/all/CAD7mqryDQCYyJ1gAmtMm8SASMWAQ4i103ptTb0f6Oda=tPY2=A@mail.gmail.com/
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230308091639.602024-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

filelocks: use mount idmapping for setlease permission check

A user should be allowed to take out a lease via an idmapped mount if
the fsuid matches the mapped uid of the inode. generic_setlease() is
checking the unmapped inode uid, causing these operations to be denied.

Fix this by comparing against the mapped inode uid instead of the
unmapped uid.

Fixes: 9caccd41541a ("fs: introduce MOUNT_ATTR_IDMAP")
Cc: stable@vger.kernel.org
Signed-off-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

i2c: dev: Fix bus callback return values

The i2cdev_{at,de}tach_adapter() callbacks are used for two purposes:
  1. As notifier callbacks, when (un)registering I2C adapters created or
     destroyed after i2c_dev_init(),
  2. As bus iterator callbacks, for registering already existing
     adapters from i2c_dev_init(), and for cleanup.

Unfortunately both use cases expect different return values: the former
expects NOTIFY_* return codes, while the latter expects zero or error
codes, and aborts in case of error.

Hence in case 2, as soon as i2cdev_{at,de}tach_adapter() returns
(non-zero) NOTIFY_OK, the bus iterator aborts.  This causes (a) only the
first already existing adapter to be registered, leading to missing
/dev/i2c-* entries, and (b) a failure to unregister all but the first
I2C adapter during cleanup.

Fix this by introducing separate callbacks for the bus iterator,
wrapping the notifier functions, and always returning succes.
Any errors inside these callback functions are unlikely to happen, and
are fatal anyway.

Fixes: cddf70d0bce71c2a ("i2c: dev: fix notifier return values")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

i2c: Convert drivers to new .probe() callback

Now that .probe() was changed not to get the id parameter, drivers can
be converted back to that with the eventual goal to drop .probe_new().

Implement that for the i2c drivers that are part of the i2c core.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

i2c: mux: Convert all drivers to new .probe() callback

Now that .probe() was changed not to get the id parameter, drivers can
be converted back to that with the eventual goal to drop .probe_new().

Implement that for the i2c mux drivers.

Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

i2c: Switch .probe() to not take an id parameter

Commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back
type") introduced a new probe callback to convert i2c init routines to
not take an i2c_device_id parameter. Now that all in-tree drivers are
converted to the temporary .probe_new() callback, .probe() can be
modified to match the desired prototype.

Now that .probe() and .probe_new() have the same semantic, they can be
defined as members of an anonymous union to save some memory and
simplify the core code a bit.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

media: i2c: ov2685: convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so
it can be trivially converted.

Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://lore.kernel.org/lkml/20221121102838.16448-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

media: i2c: ov5695: convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so
it can be trivially converted.

Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://lore.kernel.org/lkml/20221121102705.16092-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

w1: ds2482: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Link: https://lore.kernel.org/lkml/20221118224540.619276-596-uwe@kleine-koenig.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

serial: sc16is7xx: Convert to i2c's .probe_new()

.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.

Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/lkml/20221118224540.619276-572-uwe@kleine-koenig.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

mtd: maps: pismo: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Acked-by: Richard Weinberger <richard@nod.at>
Link: https://lore.kernel.org/lkml/20221118224540.619276-497-uwe@kleine-koenig.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

misc: ad525x_dpot-i2c: Convert to i2c's .probe_new()

.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/lkml/20221118224540.619276-483-uwe@kleine-koenig.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Merge tag 'drm-msm-fixes-2023-03-09' of https://gitlab.freedesktop.org/drm/msm into drm-fixes

msm-fixes for v6.3-rc2

- Fix for possible invalid ptr free in submit ioctl syncobj cleanup path.
- Synchronize GMU removal in driver teardown path
- a5xx preemption fixes
- Fix runpm imbalance at unbind
- DPU hw catalog fixes:
- set DPU_MDP_PERIPH_0_REMOVED for sc8280xp as this is another chipset
   where the PERIPH_0 block of registers is not there
- fix the DPU features supported in QCM2290 by comparing it with the
   downstream device tree
- fix the length of registers in the sc7180_ctl from 0xe4 to 0x1dc
- fix the max mixer line width for sm6115 and qcm2290 chipsets in the
   DPU catalog
- fix the scaler version on sm8550, sc8280xp, sm8450, sm8250, sm8350
   and sm6115. This was incorrectly populated on the SW version of the
   scaler library and  not the scaler HW version
- Drop dim layer support for msm8998 as its not indicated to be
   supported in the downstream DTSI
- fix the DPU_CLK_CTRL bits for msm 8998 sspp blocks
- Use DPU_CLK_CTRL_DMA* prefix instead of DPU_CLK_CTRL_CURSOR*
   for all chipsets for the DMA sspp blocks
- fix the ping-pong block base address for sc7280 in the DPU HW catalog
- Fix stack corruption issue in the dpu_hw_ctl_setup_blendstage() function
  as it was causing a negative left shift by protecting against an invalid
  index
- Clear the DSPP reservations in dpu_rm_release(). This was missed out and
  as as result the DSPP was not released from the resource manager global
  state.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvH+VH_Wx3mFMG51CMnoiU06CM-+-WMhM73M42Qx7Bp4A@mail.gmail.com

mailmap: add mailmap entries for Faith.

Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge tag 'net-6.3-rc2' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter and bpf.

  Current release - regressions:

   - core: avoid skb end_offset change in __skb_unclone_keeptruesize()

   - sched:
      - act_connmark: handle errno on tcf_idr_check_alloc
      - flower: fix fl_change() error recovery path

   - ieee802154: prevent user from crashing the host

  Current release - new code bugs:

   - eth: bnxt_en: fix the double free during device removal

   - tools: ynl:
      - fix enum-as-flags in the generic CLI
      - fully inherit attrs in subsets
      - re-license uniformly under GPL-2.0 or BSD-3-clause

  Previous releases - regressions:

   - core: use indirect calls helpers for sk_exit_memory_pressure()

   - tls:
      - fix return value for async crypto
      - avoid hanging tasks on the tx_lock

   - eth: ice: copy last block omitted in ice_get_module_eeprom()

  Previous releases - always broken:

   - core: avoid double iput when sock_alloc_file fails

   - af_unix: fix struct pid leaks in OOB support

   - tls:
      - fix possible race condition
      - fix device-offloaded sendpage straddling records

   - bpf:
      - sockmap: fix an infinite loop error
      - test_run: fix &xdp_frame misplacement for LIVE_FRAMES
      - fix resolving BTF_KIND_VAR after ARRAY, STRUCT, UNION, PTR

   - netfilter: tproxy: fix deadlock due to missing BH disable

   - phylib: get rid of unnecessary locking

   - eth: bgmac: fix *initial* chip reset to support BCM5358

   - eth: nfp: fix csum for ipsec offload

   - eth: mtk_eth_soc: fix RX data corruption issue

  Misc:

   - usb: qmi_wwan: add telit 0x1080 composition"

* tag 'net-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits)
  tools: ynl: fix enum-as-flags in the generic CLI
  tools: ynl: move the enum classes to shared code
  net: avoid double iput when sock_alloc_file fails
  af_unix: fix struct pid leaks in OOB support
  eth: fealnx: bring back this old driver
  net: dsa: mt7530: permit port 5 to work without port 6 on MT7621 SoC
  net: microchip: sparx5: fix deletion of existing DSCP mappings
  octeontx2-af: Unlock contexts in the queue context cache in case of fault detection
  net/smc: fix fallback failed while sendmsg with fastopen
  ynl: re-license uniformly under GPL-2.0 OR BSD-3-Clause
  mailmap: update entries for Stephen Hemminger
  mailmap: add entry for Maxim Mikityanskiy
  nfc: change order inside nfc_se_io error path
  ethernet: ice: avoid gcc-9 integer overflow warning
  ice: don't ignore return codes in VSI related code
  ice: Fix DSCP PFC TLV creation
  net: usb: qmi_wwan: add Telit 0x1080 composition
  net: usb: cdc_mbim: avoid altsetting toggling for Telit FE990
  netfilter: conntrack: adopt safer max chain length
  net: tls: fix device-offloaded sendpage straddling records
  ...

Merge tag 'for-linus-2023030901' of git://git./linux/kernel/git/hid/hid

Pull HID fixes from Benjamin Tissoires:

- fix potential out of bound write of zeroes in HID core with a
   specially crafted uhid device (Lee Jones)

- fix potential use-after-free in work function in intel-ish-hid (Reka
   Norman)

- selftests config fixes (Benjamin Tissoires)

- few device small fixes and support

* tag 'for-linus-2023030901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: intel-ish-hid: ipc: Fix potential use-after-free in work function
  HID: logitech-hidpp: Add support for Logitech MX Master 3S mouse
  HID: cp2112: Fix driver not registering GPIO IRQ chip as threaded
  selftest: hid: fix hid_bpf not set in config
  HID: uhid: Over-ride the default maximum data buffer value with our own
  HID: core: Provide new max_buffer_size attribute to over-ride the default

Merge tag 'm68k-for-v6.3-tag2' of git://git./linux/kernel/git/geert/linux-m68k

Pull m68k fixes from Geert Uytterhoeven:

- Fix systems with memory at end of 32-bit address space

- Fix initrd on systems where memory does not start at address zero

- Fix 68030 handling of bus errors for addresses in exception tables

* tag 'm68k-for-v6.3-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Only force 030 bus error if PC not in exception table
  m68k: mm: Move initrd phys_to_virt handling after paging_init()
  m68k: mm: Fix systems with memory at end of 32-bit address space

sh: sanitize the flags on sigreturn

We fetch %SR value from sigframe; it might have been modified by signal
handler, so we can't trust it with any bits that are not modifiable in
user mode.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Rich Felker <dalias@libc.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

io_uring: silence variable ‘prev’ set but not used warning

If io_uring.o is built with W=1, it triggers a warning:

io_uring/io_uring.c: In function ‘__io_submit_flush_completions’:
io_uring/io_uring.c:1502:40: warning: variable ‘prev’ set but not used [-Wunused-but-set-variable]
1502 | struct io_wq_work_node *node, *prev;
| ^~~~

which is due to the wq_list_for_each() iterator always keeping a 'prev'
variable. Most users need this to remove an entry from a list, for
example, but __io_submit_flush_completions() never does that.

Add a basic helper that doesn't track prev instead, and use that in
that function.

Reported-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring/uring_cmd: ensure that device supports IOPOLL

It's possible for a file type to support uring commands, but not
pollable ones. Hence before issuing one of those, we should check
that it is supported and error out upfront if it isn't.

Cc: stable@vger.kernel.org
Fixes: 5756a3a7e713 ("io_uring: add iopoll infrastructure for io_uring_cmd")
Link: https://github.com/axboe/liburing/issues/816
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

erofs: use wrapper i_blocksize() in erofs_file_read_iter()

linux/fs.h has a wrapper for this operation.

Signed-off-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230306075527.1338-1-zbestahu@gmail.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>

erofs: get rid of a useless DBG_BUGON

`err` could be -EINTR and it should not be the case. Actually such
DBG_BUGON is useless.

Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230309053148.9223-2-hsiangkao@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>

erofs: Revert "erofs: fix kvcalloc() misuse with __GFP_NOFAIL"

Let's revert commit 12724ba38992 ("erofs: fix kvcalloc() misuse with
__GFP_NOFAIL") since kvmalloc() already supports __GFP_NOFAIL in commit
a421ef303008 ("mm: allow !GFP_KERNEL allocations for kvmalloc"). So
the original fix was wrong.

Actually there was some issue as [1] discussed, so before that mm fix
is landed, the warn could still happen but applying this commit first
will cause less.

[1] https://lore.kernel.org/r/20230305053035.1911-1-hsiangkao@linux.alibaba.com

Fixes: 12724ba38992 ("erofs: fix kvcalloc() misuse with __GFP_NOFAIL")
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230309053148.9223-1-hsiangkao@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>