m68k: remove bios_name

Cc: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201026143028.3034018-8-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

lm32: remove bios_name

Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20201026143028.3034018-7-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

i386: remove bios_name

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20201026143028.3034018-6-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

hppa: remove bios_name

Cc: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201026143028.3034018-5-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

arm: remove bios_name

Get the firmware name from the MachineState object.

Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20201026143028.3034018-4-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

alpha: remove bios_name

Cc: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201026143028.3034018-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

hw/net/xilinx_axienet: Rename StreamSlave as StreamSink

In order to use inclusive terminology, rename 'slave stream'
as 'sink stream'.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-Id: <20200910070131.435543-5-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

hw/dma/xilinx_axidma: Rename StreamSlave as StreamSink

In order to use inclusive terminology, rename 'slave stream'
as 'sink stream'.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-Id: <20200910070131.435543-4-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

hw/core/stream: Rename StreamSlave as StreamSink

In order to use inclusive terminology, rename 'slave stream'
as 'sink stream'.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-Id: <20200910070131.435543-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

hw/ssi: Rename SSI 'slave' as 'peripheral'

In order to use inclusive terminology, rename SSI 'slave' as
'peripheral', following the specification resolution:
https://www.oshwa.org/a-resolution-to-redefine-spi-signal-names/

Patch created mechanically using:

  $ sed -i s/SSISlave/SSIPeripheral/ $(git grep -l SSISlave)
  $ sed -i s/SSI_SLAVE/SSI_PERIPHERAL/ $(git grep -l SSI_SLAVE)
  $ sed -i s/ssi-slave/ssi-peripheral/ $(git grep -l ssi-slave)
  $ sed -i s/ssi_slave/ssi_peripheral/ $(git grep -l ssi_slave)
  $ sed -i s/ssi_create_slave/ssi_create_peripheral/ \
                                $(git grep -l ssi_create_slave)

Then in VMStateDescription vmstate_ssi_peripheral we restored
the "SSISlave" migration stream name (to avoid breaking migration).

Finally the following files have been manually tweaked:
 - hw/ssi/pl022.c
 - hw/ssi/xilinx_spips.c

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201012124955.3409127-4-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

hw/ssi: Update coding style to make checkpatch.pl happy

To make the next commit easier to review, clean this code first.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201012124955.3409127-3-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

hw/ssi/aspeed_smc: Rename 'max_slaves' variable as 'max_peripherals'

In order to use inclusive terminology, rename max_slaves
as max_peripherals.

Patch generated using:

  $ sed -i s/slave/peripheral/ \
        hw/ssi/aspeed_smc.c include/hw/ssi/aspeed_smc.h

One line in aspeed_smc_read() has been manually tweaked
to pass checkpatch.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201012124955.3409127-2-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

pci: Let pci_dma_write() propagate MemTxResult

pci_dma_rw() returns a MemTxResult type.
Do not discard it, return it to the caller.

Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201023151923.3243652-11-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

pci: Let pci_dma_read() propagate MemTxResult

pci_dma_rw() returns a MemTxResult type.
Do not discard it, return it to the caller.

Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201023151923.3243652-10-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

pci: Let pci_dma_rw() propagate MemTxResult

dma_memory_rw() returns a MemTxResult type.
Do not discard it, return it to the caller.

Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201023151923.3243652-9-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

dma: Let dma_memory_write() propagate MemTxResult

dma_memory_rw_relaxed() returns a MemTxResult type.
Do not discard it, return it to the caller.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201023151923.3243652-8-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

dma: Let dma_memory_read() propagate MemTxResult

dma_memory_rw_relaxed() returns a MemTxResult type.
Do not discard it, return it to the caller.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201023151923.3243652-7-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

dma: Let dma_memory_rw() propagate MemTxResult

address_space_rw() returns a MemTxResult type.
Do not discard it, return it to the caller.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201023151923.3243652-6-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

dma: Let dma_memory_set() propagate MemTxResult

address_space_write() returns a MemTxResult type.
Do not discard it, return it to the caller.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201023151923.3243652-5-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

dma: Document address_space_map/address_space_unmap() prototypes

Add documentation based on address_space_map / address_space_unmap.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201023151923.3243652-4-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

qom: eliminate identical functions

Most property release functions in qom/object.c only free the opaque
value.  Combine all of them into a single function.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

docs/devel/loads-stores: Add regexp for DMA functions

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201023151923.3243652-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

WHPX: support for the kernel-irqchip on/off

This patch adds support the kernel-irqchip option for
WHPX with on or off value. 'split' value is not supported
for the option. The option only works for the latest version
of Windows (ones that are coming out on Insiders). The
change maintains backward compatibility on older version of
Windows where this option is not supported.

Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Message-Id: <SN4PR2101MB0880B13258DA9251F8459F4DC0170@SN4PR2101MB0880.namprd21.prod.outlook.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

target/i386: seg_helper: Correct segment selector nullification in the RET/IRET helper

Per the SDM, when returning to outer privilege level, for segment
registers (ES, FS, GS, and DS) if the check fails, the segment
selector becomes null, but QEMU clears the base/limit/flags as well
as nullifying the segment selector, which should be a spec violation.

Real hardware seems to be compliant with the spec, at least on one
Coffee Lake board I tested.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <1605261378-77971-1-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

target/i386: Support up to 32768 CPUs without IRQ remapping

The IOAPIC has an 'Extended Destination ID' field in its RTE, which maps
to bits 11-4 of the MSI address. Since those address bits fall within a
given 4KiB page they were historically non-trivial to use on real hardware.

The Intel IOMMU uses the lowest bit to indicate a remappable format MSI,
and then the remaining 7 bits are part of the index.

Where the remappable format bit isn't set, we can actually use the other
seven to allow external (IOAPIC and MSI) interrupts to reach up to 32768
CPUs instead of just the 255 permitted on bare metal.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <78097f9218300e63e751e077a0a5ca029b56ba46.camel@infradead.org>
[Fix UBSAN warning. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>

target/i386: fix operand order for PDEP and PEXT

For PDEP and PEXT, the mask is provided in the memory (mod+r/m)
operand, and therefore is loaded in s->T0 by gen_ldst_modrm.
The source is provided in the second source operand (VEX.vvvv)
and therefore is loaded in s->T1.  Fix the order in which
they are passed to the helpers.

Reported-by: Lenard Szolnoki <blog@lenardszolnoki.com>
Analyzed-by: Lenard Szolnoki <blog@lenardszolnoki.com>
Fixes: https://bugs.launchpad.net/qemu/+bug/1605123
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge remote-tracking branch 'remotes/legoater/tags/pull-aspeed-20201210' into staging

Aspeed patches :

* New device model for EMC1413/EMC1414 temperature sensors (I2C)
* New g220a-bmc Aspeed machine
* couple of Aspeed cleanups

# gpg: Signature made Thu 10 Dec 2020 11:58:10 GMT
# gpg:                using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B  0B60 51A3 43C7 CFFB ECA1

* remotes/legoater/tags/pull-aspeed-20201210:
  aspeed: g220a-bmc: Add an FRU
  aspeed/smc: Add support for address lane disablement
  ast2600: SRAM is 89KB
  aspeed: Add support for the g220a-bmc board
  hw/misc: add an EMC141{3,4} device model

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/kraxel/tags/microvm-20201210-pull-request' into staging

microvm: add support for second ioapic

# gpg: Signature made Thu 10 Dec 2020 12:13:42 GMT
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/microvm-20201210-pull-request:
  tests/acpi: disallow updates for expected data files
  tests/acpi: update expected data files
  tests/acpi: add ioapic2=on test for microvm
  tests/acpi: add data files for ioapic2 test variant
  tests/acpi: allow updates for expected data files
  microvm: add second ioapic
  microvm: drop microvm_gsi_handler()
  microvm: make pcie irq base runtime changeable
  microvm: make number of virtio transports runtime changeable
  x86: add support for second ioapic
  x86: rewrite gsi_handler()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20201210' into staging

target-arm queue:
 * hw/arm/smmuv3: Fix up L1STD_SPAN decoding
 * xlnx-zynqmp: Support Xilinx ZynqMP CAN controllers
 * sbsa-ref: allow to use Cortex-A53/57/72 cpus
 * Various minor code cleanups
 * hw/intc/armv7m_nvic: Make all of system PPB range be RAZWI/BusFault
 * Implement more pieces of ARMv8.1M support

# gpg: Signature made Thu 10 Dec 2020 11:46:43 GMT
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20201210: (36 commits)
  hw/arm/armv7m: Correct typo in QOM object name
  hw/intc/armv7m_nvic: Implement read/write for RAS register block
  target/arm: Implement M-profile "minimal RAS implementation"
  hw/intc/armv7m_nvic: Fix "return from inactive handler" check
  target/arm: Implement CCR_S.TRD behaviour for SG insns
  hw/intc/armv7m_nvic: Support v8.1M CCR.TRD bit
  target/arm: Implement new v8.1M VLLDM and VLSTM encodings
  target/arm: Implement new v8.1M NOCP check for exception return
  target/arm: Implement v8.1M REVIDR register
  target/arm: In v8.1M, don't set HFSR.FORCED on vector table fetch failures
  target/arm: For v8.1M, always clear R0-R3, R12, APSR, EPSR on exception entry
  hw/intc/armv7m_nvic: Update FPDSCR masking for v8.1M
  target/arm: Implement FPCXT_S fp system register
  target/arm: Factor out preserve-fp-state from full_vfp_access_check()
  target/arm: Use new FPCR_NZCV_MASK constant
  target/arm: Implement M-profile FPSCR_nzcvqc
  target/arm: Implement VLDR/VSTR system register
  target/arm: Move general-use constant expanders up in translate.c
  target/arm: Refactor M-profile VMSR/VMRS handling
  target/arm: Enforce M-profile VMRS/VMSR register restrictions
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/armv7m: Correct typo in QOM object name

Correct a typo in the name we give the NVIC object.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-28-peter.maydell@linaro.org

hw/intc/armv7m_nvic: Implement read/write for RAS register block

The RAS feature has a block of memory-mapped registers at offset
0x5000 within the PPB.  For a "minimal RAS" implementation we provide
no error records and so the only registers that exist in the block
are ERRIIDR and ERRDEVID.

The "RAZ/WI for privileged, BusFault for nonprivileged" behaviour
of the "nvic-default" region is actually valid for minimal-RAS,
so the main benefit of providing an explicit implementation of
the register block is more accurate LOG_UNIMP messages, and a
framework for where we could add a real RAS implementation later
if necessary.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-27-peter.maydell@linaro.org

target/arm: Implement M-profile "minimal RAS implementation"

For v8.1M the architecture mandates that CPUs must provide at
least the "minimal RAS implementation" from the Reliability,
Availability and Serviceability extension. This consists of:
 * an ESB instruction which is a NOP
   -- since it is in the HINT space we need only add a comment
 * an RFSR register which will RAZ/WI
 * a RAZ/WI AIRCR.IESB bit
   -- the code which handles writes to AIRCR does not allow setting
      of RES0 bits, so we already treat this as RAZ/WI; add a comment
      noting that this is deliberate
 * minimal implementation of the RAS register block at 0xe0005000
   -- this will be in a subsequent commit
 * setting the ID_PFR0.RAS field to 0b0010
   -- we will do this when we add the Cortex-M55 CPU model

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-26-peter.maydell@linaro.org

hw/intc/armv7m_nvic: Fix "return from inactive handler" check

In commit 077d7449100d824a4 we added code to handle the v8M
requirement that returns from NMI or HardFault forcibly deactivate
those exceptions regardless of what interrupt the guest is trying to
deactivate.  Unfortunately this broke the handling of the "illegal
exception return because the returning exception number is not
active" check for those cases.  In the pseudocode this test is done
on the exception the guest asks to return from, but because our
implementation was doing this in armv7m_nvic_complete_irq() after the
new "deactivate NMI/HardFault regardless" code we ended up doing the
test on the VecInfo for that exception instead, which usually meant
failing to raise the illegal exception return fault.

In the case for "configurable exception targeting the opposite
security state" we detected the illegal-return case but went ahead
and deactivated the VecInfo anyway, which is wrong because that is
the VecInfo for the other security state.

Rearrange the code so that we first identify the illegal return
cases, then see if we really need to deactivate NMI or HardFault
instead, and finally do the deactivation.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-25-peter.maydell@linaro.org

target/arm: Implement CCR_S.TRD behaviour for SG insns

v8.1M introduces a new TRD flag in the CCR register, which enables
checking for stack frame integrity signatures on SG instructions.
Add the code in the SG insn implementation for the new behaviour.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-24-peter.maydell@linaro.org

hw/intc/armv7m_nvic: Support v8.1M CCR.TRD bit

v8.1M introduces a new TRD flag in the CCR register, which enables
checking for stack frame integrity signatures on SG instructions.
This bit is not banked, and is always RAZ/WI to Non-secure code.
Adjust the code for handling CCR reads and writes to handle this.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-23-peter.maydell@linaro.org

target/arm: Implement new v8.1M VLLDM and VLSTM encodings

v8.1M adds new encodings of VLLDM and VLSTM (where bit 7 is set).
The only difference is that:
 * the old T1 encodings UNDEF if the implementation implements 32
   Dregs (this is currently architecturally impossible for M-profile)
 * the new T2 encodings have the implementation-defined option to
   read from memory (discarding the data) or write UNKNOWN values to
   memory for the stack slots that would be D16-D31

We choose not to make those accesses, so for us the two
instructions behave identically assuming they don't UNDEF.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-21-peter.maydell@linaro.org

target/arm: Implement new v8.1M NOCP check for exception return

In v8.1M a new exception return check is added which may cause a NOCP
UsageFault (see rule R_XLTP): before we clear s0..s15 and the FPSCR
we must check whether access to CP10 from the Security state of the
returning exception is disabled; if it is then we must take a fault.

(Note that for our implementation CPPWR is always RAZ/WI and so can
never cause CP10 accesses to fail.)

The other v8.1M change to this register-clearing code is that if MVE
is implemented VPR must also be cleared, so add a TODO comment to
that effect.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-20-peter.maydell@linaro.org

target/arm: Implement v8.1M REVIDR register

In v8.1M a REVIDR register is defined, which is at address 0xe00ecfc
and is a read-only IMPDEF register providing implementation specific
minor revision information, like the v8A REVIDR_EL1. Implement this.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-19-peter.maydell@linaro.org

target/arm: In v8.1M, don't set HFSR.FORCED on vector table fetch failures

In v8.1M, vector table fetch failures don't set HFSR.FORCED (see rule
R_LLRP).  (In previous versions of the architecture this was either
required or IMPDEF.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-18-peter.maydell@linaro.org

target/arm: For v8.1M, always clear R0-R3, R12, APSR, EPSR on exception entry

In v8.0M, on exception entry the registers R0-R3, R12, APSR and EPSR
are zeroed for an exception taken to Non-secure state; for an
exception taken to Secure state they become UNKNOWN, and we chose to
leave them at their previous values.

In v8.1M the behaviour is specified more tightly and these registers
are always zeroed regardless of the security state that the exception
targets (see rule R_KPZV).  Implement this.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-17-peter.maydell@linaro.org

hw/intc/armv7m_nvic: Update FPDSCR masking for v8.1M

The FPDSCR register has a similar layout to the FPSCR.  In v8.1M it
gains new fields FZ16 (if half-precision floating point is supported)
and LTPSIZE (always reads as 4).  Update the reset value and the code
that handles writes to this register accordingly.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-16-peter.maydell@linaro.org

target/arm: Implement FPCXT_S fp system register

Implement the new-in-v8.1M FPCXT_S floating point system register.
This is for saving and restoring the secure floating point context,
and it reads and writes bits [27:0] from the FPSCR and the
CONTROL.SFPA bit in bit [31].

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-14-peter.maydell@linaro.org

target/arm: Factor out preserve-fp-state from full_vfp_access_check()

Factor out the code which handles M-profile lazy FP state preservation
from full_vfp_access_check(); accesses to the FPCXT_NS register are
a special case which need to do just this part (corresponding in the
pseudocode to the PreserveFPState() function), and not the full
set of actions matching the pseudocode ExecuteFPCheck() which
normal FP instructions need to do.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201119215617.29887-13-peter.maydell@linaro.org

target/arm: Use new FPCR_NZCV_MASK constant

We defined a constant name for the mask of NZCV bits in the FPCR/FPSCR
in the previous commit; use it in a couple of places in existing code,
where we're masking out everything except NZCV for the "load to Rt=15
sets CPSR.NZCV" special case.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-12-peter.maydell@linaro.org

target/arm: Implement M-profile FPSCR_nzcvqc

v8.1M defines a new FP system register FPSCR_nzcvqc; this behaves
like the existing FPSCR, except that it reads and writes only bits
[31:27] of the FPSCR (the N, Z, C, V and QC flag bits).  (Unlike the
FPSCR, the special case for Rt=15 of writing the CPSR.NZCV is not
permitted.)

Implement the register.  Since we don't yet implement MVE, we handle
the QC bit as RES0, with todo comments for where we will need to add
support later.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-11-peter.maydell@linaro.org

target/arm: Implement VLDR/VSTR system register

Implement the new-in-v8.1M VLDR/VSTR variants which directly
read or write FP system registers to memory.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-10-peter.maydell@linaro.org

target/arm: Move general-use constant expanders up in translate.c

The constant-expander functions like negate, plus_2, etc, are
generally useful; move them up in translate.c so we can use them in
the VFP/Neon decoders as well as in the A32/T32/T16 decoders.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-9-peter.maydell@linaro.org

target/arm: Refactor M-profile VMSR/VMRS handling

Currently M-profile borrows the A-profile code for VMSR and VMRS
(access to the FP system registers), because all it needs to support
is the FPSCR.  In v8.1M things become significantly more complicated
in two ways:

 * there are several new FP system registers; some have side effects
   on read, and one (FPCXT_NS) needs to avoid the usual
   vfp_access_check() and the "only if FPU implemented" check

 * all sysregs are now accessible both by VMRS/VMSR (which
   reads/writes a general purpose register) and also by VLDR/VSTR
   (which reads/writes them directly to memory)

Refactor the structure of how we handle VMSR/VMRS to cope with this:

 * keep the M-profile code entirely separate from the A-profile code

 * abstract out the "read or write the general purpose register" part
   of the code into a loadfn or storefn function pointer, so we can
   reuse it for VLDR/VSTR.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-8-peter.maydell@linaro.org

target/arm: Enforce M-profile VMRS/VMSR register restrictions

For M-profile before v8.1M, the only valid register for VMSR/VMRS is
the FPSCR.  We have a comment that states this, but the actual logic
to forbid accesses for any other register value is missing, so we
would end up with A-profile style behaviour.  Add the missing check.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-7-peter.maydell@linaro.org

target/arm: Implement CLRM instruction

In v8.1M the new CLRM instruction allows zeroing an arbitrary set of
the general-purpose registers and APSR.  Implement this.

The encoding is a subset of the LDMIA T2 encoding, using what would
be Rn=0b1111 (which UNDEFs for LDMIA).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-6-peter.maydell@linaro.org

target/arm: Implement VSCCLRM insn

Implement the v8.1M VSCCLRM insn, which zeros floating point
registers if there is an active floating point context.
This requires support in write_neon_element32() for the MO_32
element size, so add it.

Because we want to use arm_gen_condlabel(), we need to move
the definition of that function up in translate.c so it is
before the #include of translate-vfp.c.inc.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-5-peter.maydell@linaro.org

target/arm: Don't clobber ID_PFR1.Security on M-profile cores

In arm_cpu_realizefn() we check whether the board code disabled EL3
via the has_el3 CPU object property, which we create if the CPU
starts with the ARM_FEATURE_EL3 feature bit.  If it is disabled, then
we turn off ARM_FEATURE_EL3 and also zero out the relevant fields in
the ID_PFR1 and ID_AA64PFR0 registers.

This codepath was incorrectly being taken for M-profile CPUs, which
do not have an EL3 and don't set ARM_FEATURE_EL3, but which may have
the M-profile Security extension and so should have non-zero values
in the ID_PFR1.Security field.

Restrict the handling of the feature flag to A/R-profile cores.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-4-peter.maydell@linaro.org

target/arm: Implement v8.1M PXN extension

In v8.1M the PXN architecture extension adds a new PXN bit to the
MPU_RLAR registers, which forbids execution of code in the region
from a privileged mode.

This is another feature which is just in the generic "in v8.1M" set
and has no ID register field indicating its presence.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-3-peter.maydell@linaro.org

hw/intc/armv7m_nvic: Make all of system PPB range be RAZWI/BusFault

For M-profile CPUs, the range from 0xe0000000 to 0xe00fffff is the
Private Peripheral Bus range, which includes all of the memory mapped
devices and registers that are part of the CPU itself, including the
NVIC, systick timer, and debug and trace components like the Data
Watchpoint and Trace unit (DWT).  Within this large region, the range
0xe000e000 to 0xe000efff is the System Control Space (NVIC, system
registers, systick) and 0xe002e000 to 0exe002efff is its Non-secure
alias.

The architecture is clear that within the SCS unimplemented registers
should be RES0 for privileged accesses and generate BusFault for
unprivileged accesses, and we currently implement this.

It is less clear about how to handle accesses to unimplemented
regions of the wider PPB.  Unprivileged accesses should definitely
cause BusFaults (R_DQQS), but the behaviour of privileged accesses is
not given as a general rule.  However, the register definitions of
individual registers for components like the DWT all state that they
are RES0 if the relevant component is not implemented, so the
simplest way to provide that is to provide RAZ/WI for the whole range
for privileged accesses.  (The v7M Arm ARM does say that reserved
registers should be UNK/SBZP.)

Expand the container MemoryRegion that the NVIC exposes so that
it covers the whole PPB space. This means:
 * moving the address that the ARMV7M device maps it to down by
   0xe000 bytes
 * moving the off and the offsets within the container of all the
   subregions forward by 0xe000 bytes
 * adding a new default MemoryRegion that covers the whole container
   at a lower priority than anything else and which provides the
   RAZWI/BusFault behaviour

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-2-peter.maydell@linaro.org

i.MX6ul: Fix bad printf format specifiers

We should use printf format specifier "%u" instead of "%d" for
argument of type "unsigned int".

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Message-id: 20201126111109.112238-5-alex.chen@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

i.MX6: Fix bad printf format specifiers

We should use printf format specifier "%u" instead of "%d" for
argument of type "unsigned int".

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Message-id: 20201126111109.112238-4-alex.chen@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

i.MX31: Fix bad printf format specifiers

We should use printf format specifier "%u" instead of "%d" for
argument of type "unsigned int".

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Message-id: 20201126111109.112238-3-alex.chen@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

i.MX25: Fix bad printf format specifiers

We should use printf format specifier "%u" instead of "%d" for
argument of type "unsigned int".

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Message-id: 20201126111109.112238-2-alex.chen@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

tests/qtest/npcm7xx_rng-test: dump random data on failure

Dump the collected random data after a randomness test failure.

Note that this relies on the test having called
g_test_set_nonfatal_assertions() so we don't abort immediately on the
assertion failure.

Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: minor commit message tweak]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

sbsa-ref: allow to use Cortex-A53/57/72 cpus

Trusted Firmware now supports A72 on sbsa-ref by default [1] so enable
it for QEMU as well. A53 was already enabled there.

1. https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/7117

Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201120141705.246690-1-marcin.juszkiewicz@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

MAINTAINERS: Add maintainer entry for Xilinx ZynqMP CAN controller

Reviewed-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com>
Message-id: 1605728926-352690-5-git-send-email-fnu.vikram@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

tests/qtest: Introduce tests for Xilinx ZynqMP CAN controller

The QTests perform five tests on the Xilinx ZynqMP CAN controller:
    Tests the CAN controller in loopback, sleep and snoop mode.
    Tests filtering of incoming CAN messages.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com>
Message-id: 1605728926-352690-4-git-send-email-fnu.vikram@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

xlnx-zynqmp: Connect Xilinx ZynqMP CAN controllers

Connect CAN0 and CAN1 on the ZynqMP.

Reviewed-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com>
Message-id: 1605728926-352690-3-git-send-email-fnu.vikram@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/net/can: Introduce Xilinx ZynqMP CAN controller

The Xilinx ZynqMP CAN controller is developed based on SocketCAN, QEMU CAN bus
implementation. Bus connection and socketCAN connection for each CAN module
can be set through command lines.

Example for using single CAN:
    -object can-bus,id=canbus0 \
    -machine xlnx-zcu102.canbus0=canbus0 \
    -object can-host-socketcan,id=socketcan0,if=vcan0,canbus=canbus0

Example for connecting both CAN to same virtual CAN on host machine:
    -object can-bus,id=canbus0 -object can-bus,id=canbus1 \
    -machine xlnx-zcu102.canbus0=canbus0 \
    -machine xlnx-zcu102.canbus1=canbus1 \
    -object can-host-socketcan,id=socketcan0,if=vcan0,canbus=canbus0 \
    -object can-host-socketcan,id=socketcan1,if=vcan0,canbus=canbus1

To create virtual CAN on the host machine, please check the QEMU CAN docs:
https://github.com/qemu/qemu/blob/master/docs/can.txt

Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com>
Message-id: 1605728926-352690-2-git-send-email-fnu.vikram@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/smmuv3: Fix up L1STD_SPAN decoding

Accroding to the SMMUv3 spec, the SPAN field of Level1 Stream Table
Descriptor is 5 bits([4:0]).

Fixes: 9bde7f0674f(hw/arm/smmuv3: Implement translate callback)
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
Message-id: 20201124023711.1184-1-jiangkunkun@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

aspeed: g220a-bmc: Add an FRU

Add an eeprom device and fill it with fru
information

$ ipmitool fru print 0
Product Manufacturer  : Bytedance
Product Name          : G220A

Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20201210103607.556-1-wangzhiqiang.bj@bytedance.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

aspeed/smc: Add support for address lane disablement

The controller can be configured to disable or enable address and data
byte lanes when issuing commands. This is useful in read command mode
to send SPI NOR commands that don't have an address space, such as
RDID. It's a good way to have a unified read operation for registers
and flash contents accesses.

A new SPI driver proposed by Aspeed makes use of this feature. Add
support for address lanes to start with. We will do the same for the
data lanes if they are controlled one day.

Cc: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20201120161547.740806-2-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

ast2600: SRAM is 89KB

On the AST2600A1, the SRAM size was increased to 89KB.

Fixes: 7582591ae745 ("aspeed: Support AST2600A1 silicon revision")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20201112012113.835858-1-joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

aspeed: Add support for the g220a-bmc board

G220A is a 2 socket x86 motherboard supported by OpenBMC.
Strapping configuration was obtained from hardware.

Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20201122105134.671-2-wangzhiqiang.bj@bytedance.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/misc: add an EMC141{3,4} device model

Largely inspired by the TMP421 temperature sensor, here is a model for
the EMC1413/EMC1414 temperature sensors.

Specs can be found here :
  http://ww1.microchip.com/downloads/en/DeviceDoc/20005274A.pdf

Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20201122105134.671-1-wangzhiqiang.bj@bytedance.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

tests/acpi: disallow updates for expected data files

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20201203105423.10431-13-kraxel@redhat.com

tests/acpi: update expected data files

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20201203105423.10431-12-kraxel@redhat.com

tests/acpi: add ioapic2=on test for microvm

APIC table changes:

 [034h 0052   1]                Subtable Type : 01 [I/O APIC]
 [035h 0053   1]                       Length : 0C
 [036h 0054   1]                  I/O Apic ID : 00
 [037h 0055   1]                     Reserved : 00
 [038h 0056   4]                      Address : FEC00000
 [03Ch 0060   4]                    Interrupt : 00000000

+[040h 0064   1]                Subtable Type : 01 [I/O APIC]
+[041h 0065   1]                       Length : 0C
+[042h 0066   1]                  I/O Apic ID : 01
+[043h 0067   1]                     Reserved : 00
+[044h 0068   4]                      Address : FEC10000
+[048h 0072   4]                    Interrupt : 00000018

DSDT table changes:

-        Device (VR07)
+        Device (VR23)
         {
             Name (_HID, "LNRO0005")  // _HID: Hardware ID
-            Name (_UID, 0x07)  // _UID: Unique ID
+            Name (_UID, 0x17)  // _UID: Unique ID
             Name (_CCA, One)  // _CCA: Cache Coherency Attribute
             Name (_CRS, ResourceTemplate ()  // _CRS: Current Resource Settings
             {
                 Memory32Fixed (ReadWrite,
-                    0xFEB00E00,         // Address Base
+                    0xFEB02E00,         // Address Base
                     0x00000200,         // Address Length
                     )
                 Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, ,, )
                 {
-                    0x00000017,
+                    0x0000002F,
                 }
             })
         }
     }

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20201203105423.10431-11-kraxel@redhat.com

tests/acpi: add data files for ioapic2 test variant

Copy microvm/APIC -> microvm/APIC.ioapic2
Copy microvm/DSDT -> microvm/DSDT.ioapic2

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20201203105423.10431-10-kraxel@redhat.com

tests/acpi: allow updates for expected data files

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20201203105423.10431-9-kraxel@redhat.com

microvm: add second ioapic

Create second ioapic, route virtio-mmio IRQs to it,
allow more virtio-mmio devices (24 instead of 8).

Needs ACPI, enabled by default, can be turned off
using -machine ioapic2=off

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20201203105423.10431-8-kraxel@redhat.com

microvm: drop microvm_gsi_handler()

With the improved gsi_handler() we don't need
our private version any more.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20201203105423.10431-7-kraxel@redhat.com

microvm: make pcie irq base runtime changeable

Allows to move them in case we have enough
irq lines available.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20201203105423.10431-6-kraxel@redhat.com

microvm: make number of virtio transports runtime changeable

This will allow to increase the number of transports in
case we have enough irq lines available for them all.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20201203105423.10431-5-kraxel@redhat.com

x86: add support for second ioapic

Add ioapic_init_secondary to initialize it, wire up
in gsi handling and acpi apic table creation.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20201203105423.10431-4-kraxel@redhat.com

x86: rewrite gsi_handler()

Rewrite function to use switch() for IRQ number mapping.
Check i8259_irq exists before raising it so the function
also works in case no i8259 (aka pic) is present.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20201203105423.10431-3-kraxel@redhat.com

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pc,pci,virtio: fixes, cleanups

Lots of fixes, cleanups.
CPU hot-unplug improvements.
A new AER property for virtio devices, adding a dummy AER capability.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed 09 Dec 2020 18:04:28 GMT
# gpg:                using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg:                issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream: (65 commits)
  hw/virtio-pci Added AER capability.
  hw/virtio-pci Added counter for pcie capabilities offsets.
  pcie_aer: Fix help message of pcie_aer_inject_error command
  x86: ich9: let firmware negotiate 'CPU hot-unplug with SMI' feature
  x86: ich9: factor out "guest_cpu_hotplug_features"
  tests/acpi: update expected files
  x86: acpi: let the firmware handle pending "CPU remove" events in SMM
  tests/acpi: allow expected files change
  x86: acpi: introduce AcpiPmInfo::smi_on_cpu_unplug
  acpi: cpuhp: introduce 'firmware performs eject' status/control bits
  hw/i386/pc: add max combined fw size as machine configuration option
  block/export: avoid g_return_val_if() input validation
  contrib/vhost-user-input: avoid g_return_val_if() input validation
  contrib/vhost-user-gpu: avoid g_return_val_if() input validation
  contrib/vhost-user-blk: avoid g_return_val_if() input validation
  .gitlab-ci: add build-libvhost-user
  libvhost-user: add a simple link test without glib
  libvhost-user: make it a meson subproject
  libvhost-user: drop qemu/osdep.h dependency
  libvhost-user: remove qemu/compiler.h usage
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/virtio-pci Added AER capability.

Added AER capability for virtio-pci devices.
Also added property for devices, by default AER is disabled.

Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Message-Id: <20201203110713.204938-3-andrew@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

hw/virtio-pci Added counter for pcie capabilities offsets.

Removed hardcoded offset for ats. Added cap offset counter
for future capabilities like AER.

Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Message-Id: <20201203110713.204938-2-andrew@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

pcie_aer: Fix help message of pcie_aer_inject_error command

There is an interesting typo in the help message of pcie_aer_inject_error
command. Use 'tlp' instead of 'tlb' to match the PCIe AER term.

Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Message-Id: <20201204030953.837-1-yuzenghui@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

x86: ich9: let firmware negotiate 'CPU hot-unplug with SMI' feature

Keep CPU hotunplug with SMI disabled on 5.2 and older and enable
it by default on newer machine types.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201207140739.3829993-9-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

x86: ich9: factor out "guest_cpu_hotplug_features"

it will be reused by next patch to check validity of unplug
feature.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201207140739.3829993-8-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

tests/acpi: update expected files

update expected files with following change:

@@ -557,6 +557,7 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPCDSDT", 0x00000001)
                 CINS,   1,
                 CRMV,   1,
                 CEJ0,   1,
+                CEJF,   1,
                 Offset (0x05),
                 CCMD,   8
             }

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201207140739.3829993-7-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

x86: acpi: let the firmware handle pending "CPU remove" events in SMM

if firmware and QEMU negotiated CPU hotunplug support, generate
_EJ0 method so that it will mark CPU for removal by firmware and
pass control to it by triggering SMI.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201207140739.3829993-6-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

tests/acpi: allow expected files change

Change that will be introduced by following patch:

@@ -557,6 +557,7 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPCDSDT", 0x00000001)
                 CINS,   1,
                 CRMV,   1,
                 CEJ0,   1,
+                CEJF,   1,
                 Offset (0x05),
                 CCMD,   8
             }

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201207140739.3829993-5-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

x86: acpi: introduce AcpiPmInfo::smi_on_cpu_unplug

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201207140739.3829993-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: cpuhp: introduce 'firmware performs eject' status/control bits

Adds bit #4 to status/control field of CPU hotplug MMIO interface.
New bit will be used OSPM to mark CPUs as pending for removal by firmware,
when it calls _EJ0 method on CPU device node. Later on, when firmware
sees this bit set, it will perform CPU eject which will clear bit #4
as well.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201207140739.3829993-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

hw/i386/pc: add max combined fw size as machine configuration option

At Hewlett Packard Inc. we have a need for increased fw size to enable testing of our custom fw.

Rebase v6 patch to d73c46e4

Signed-off-by: Erich McMillan <erich.mcmillan@hp.com>
Message-Id: <20201208155338.14-1-erich.mcmillan@hp.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

block/export: avoid g_return_val_if() input validation

Do not validate input with g_return_val_if(). This API is intended for
checking programming errors and is compiled out with -DG_DISABLE_CHECKS.

Use an explicit if statement for input validation so it cannot
accidentally be compiled out.

Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201118091644.199527-5-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

contrib/vhost-user-input: avoid g_return_val_if() input validation

Do not validate input with g_return_val_if(). This API is intended for
checking programming errors and is compiled out with -DG_DISABLE_CHECKS.

Use an explicit if statement for input validation so it cannot
accidentally be compiled out.

Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201118091644.199527-4-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

contrib/vhost-user-gpu: avoid g_return_val_if() input validation

Do not validate input with g_return_val_if(). This API is intended for
checking programming errors and is compiled out with -DG_DISABLE_CHECKS.

Use an explicit if statement for input validation so it cannot
accidentally be compiled out.

Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201118091644.199527-3-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

contrib/vhost-user-blk: avoid g_return_val_if() input validation

Do not validate input with g_return_val_if(). This API is intended for
checking programming errors and is compiled out with -DG_DISABLE_CHECKS.

Use an explicit if statement for input validation so it cannot
accidentally be compiled out.

Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201118091644.199527-2-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

.gitlab-ci: add build-libvhost-user

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20201125100640.366523-9-marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

libvhost-user: add a simple link test without glib

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20201125100640.366523-8-marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-12-09' into staging

* Gitlab-CI improvement patches by Philippe
* Some small fixes for tests
* Fix coverity warning in the mcf5206 code

# gpg: Signature made Wed 09 Dec 2020 07:13:12 GMT
# gpg:                using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg:                issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg:                 aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg:                 aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg:                 aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3  EAB9 2ED9 D774 FE70 2DB5

* remotes/huth-gitlab/tags/pull-request-2020-12-09:
  hw/m68k/mcf5206: Don't leak IRQs in mcf5206_mbar_realize()
  gitlab-ci: Move coroutine tests across to gitlab
  gitlab-ci: Move user-static test across to gitlab
  gitlab-ci: Update 'build-disabled' to cover all configurable options
  gitlab-ci: Split CONFIGURE_ARGS one argument per line for build-disabled
  fuzz: avoid double-fetches by default
  tests/qtest/fuzz-test: Quit test_lp1878642 once done
  test-qga: fix a resource leak in test_qga_guest_get_osinfo()
  gitlab-ci: Add Xen cross-build jobs
  gitlab-ci: Add KVM s390x cross-build jobs
  gitlab-ci: Introduce 'cross_accel_build_job' template
  gitlab-ci: Replace YAML anchors by extends (cross_system_build_job)
  gitlab-ci: Document 'build-tcg-disabled' is a KVM X86 job

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>