OSDN Git Service
Corbin Simpson [Fri, 6 Mar 2009 19:17:55 +0000 (11:17 -0800)]
r300-gallium: Flat/smooth shading state.
Corbin Simpson [Fri, 6 Mar 2009 17:44:21 +0000 (09:44 -0800)]
r300-gallium: Pick up a few more bits of rs_state.
Including two registers that already should have been covered...huh...
José Fonseca [Fri, 6 Mar 2009 18:03:50 +0000 (18:03 +0000)]
wgl: Check support for all other depth/stencil formats.
José Fonseca [Fri, 6 Mar 2009 17:57:02 +0000 (17:57 +0000)]
wgl: Choose a supported S8Z24/Z24S8/X8Z24/Z24X8.
Jeremy Huddleston [Fri, 6 Mar 2009 16:20:21 +0000 (11:20 -0500)]
Updated darwin config for when X11 is not in the same location as we're installing to
José Fonseca [Fri, 6 Mar 2009 14:02:42 +0000 (14:02 +0000)]
mesa: Reads must also be done with lock held.
Otherwise two threads might think each made the refcount go zero.
José Fonseca [Fri, 6 Mar 2009 14:01:24 +0000 (14:01 +0000)]
mesa: Fix typo.
Windows threads block if one over-unlocks them.
Eric Anholt [Fri, 6 Mar 2009 07:32:00 +0000 (23:32 -0800)]
intel: Fix bpp setting of blits to 8bpp targets.
This was causing hangs in cairogears, as we would blit to the 8bpp target
(A8 texture) as 16bpp, and stomp over state objects.
Eric Anholt [Fri, 6 Mar 2009 02:50:29 +0000 (18:50 -0800)]
i965: fix 3DPRIMITIVE batch decode of the vertex count field.
Eric Anholt [Fri, 6 Mar 2009 02:17:13 +0000 (18:17 -0800)]
i965: Stop dumping programs after the first all-zeroes entry.
Eric Anholt [Fri, 6 Mar 2009 01:18:49 +0000 (17:18 -0800)]
intel: Add always_flush_batch driconf option for making small batchbuffers.
This can improve debugging with INTEL_DEBUG=batch,sync by giving smaller
batchbuffers.
Eric Anholt [Fri, 6 Mar 2009 01:08:36 +0000 (17:08 -0800)]
intel: Add always_flush_cache driconf option for debugging cache flush failure.
I keep wanting to hack this knob in as a one-time thing, so it seemed useful
to have all the time.
Eric Anholt [Thu, 5 Mar 2009 18:57:43 +0000 (10:57 -0800)]
i965: Add a note about why the _NEW_STENCIL is required in draw_buffers.
Eric Anholt [Thu, 5 Mar 2009 16:25:22 +0000 (08:25 -0800)]
intel: Remove a gratuitous MI_FLUSH after clearing with a blit.
The 3D destination shares the same cache so we don't have any trouble with
the later commands needing the writes flushed inside of the same batchbuffer.
Eric Anholt [Thu, 5 Mar 2009 16:13:21 +0000 (08:13 -0800)]
i965: Remove dead flushing code.
Joel Bosveld [Thu, 5 Mar 2009 23:46:08 +0000 (08:46 +0900)]
st/xorg: Install to XORG_DRIVER_INSTALL_DIR
Brian Paul [Fri, 6 Mar 2009 00:24:39 +0000 (17:24 -0700)]
i965: comments and formatting fixes
Brian Paul [Fri, 6 Mar 2009 00:23:42 +0000 (17:23 -0700)]
i965: fix emit_math1() function used for scalar instructions
Instructions such as RCP, RSQ, LOG must smear the result of the function
across the dest register's X, Y, Z and W channels (subject to write masking).
Before this change, only the X component was getting written.
Among other things, this fixes cube map texture sampling in GLSL shaders
(since cube lookups involve normalizing the texcoord).
Brian Paul [Fri, 6 Mar 2009 00:14:29 +0000 (17:14 -0700)]
mesa: added some assertions
Brian Paul [Fri, 6 Mar 2009 00:14:05 +0000 (17:14 -0700)]
mesa: when printing src regs, use |reg| for absolute value
And check opcode number to avoid crashing on driver-private opcodes.
Brian Paul [Fri, 6 Mar 2009 00:04:27 +0000 (17:04 -0700)]
i965: fix screen depth test in intel_validate_framebuffer)_
front_region may be null.
Brian Paul [Thu, 5 Mar 2009 22:08:36 +0000 (15:08 -0700)]
i965: init dest reg CondMask = COND_TR (the proper default)
Plus fix up a debug printf.
Corbin Simpson [Thu, 5 Mar 2009 19:59:22 +0000 (11:59 -0800)]
r300-gallium: Move RS block setup to CSO.
Corbin Simpson [Thu, 5 Mar 2009 19:01:03 +0000 (11:01 -0800)]
r300-gallium: Move scissor state.
Keep it grouped with all the other parameterized state.
Corbin Simpson [Thu, 5 Mar 2009 18:46:52 +0000 (10:46 -0800)]
r300-gallium: Fix up vertex count.
Corbin Simpson [Thu, 5 Mar 2009 18:46:10 +0000 (10:46 -0800)]
r300-gallium: Use only one CS section for vertex_format.
Brian Paul [Thu, 5 Mar 2009 17:01:53 +0000 (10:01 -0700)]
Revert "softpipe: added null ptr check for align_free() call in vbuf code"
This reverts commit
6db24f449de9cc81e1f7bb2dde55a9819463d5e5.
With a null ptr check in align_free() this is no longer needed.
Brian Paul [Thu, 5 Mar 2009 17:01:17 +0000 (10:01 -0700)]
gallium: added null ptr check in align_free()
Brian Paul [Thu, 5 Mar 2009 15:33:50 +0000 (08:33 -0700)]
mesa: add wglext.h to tarball list
Brian Paul [Thu, 5 Mar 2009 15:33:04 +0000 (08:33 -0700)]
gl: added include/GL/wglext.h
Brian Paul [Thu, 5 Mar 2009 16:49:00 +0000 (09:49 -0700)]
softpipe: added null ptr check for align_free() call in vbuf code
Fixes GALLIUM_NOCELL path. See bug 20475.
Corbin Simpson [Thu, 5 Mar 2009 16:41:04 +0000 (08:41 -0800)]
r300-gallium: C++ compat fix.
Oops. :3
Joakim Sindholt [Thu, 5 Mar 2009 16:22:55 +0000 (17:22 +0100)]
radeon-gallium: fix dri2 build
Brian Paul [Thu, 5 Mar 2009 15:25:37 +0000 (08:25 -0700)]
gl: update glext.h to version 46
Corbin Simpson [Thu, 5 Mar 2009 04:52:45 +0000 (20:52 -0800)]
radeon-gallium: Add Xorg state tracker Radeon winsys stub.
Corbin Simpson [Thu, 5 Mar 2009 04:46:10 +0000 (20:46 -0800)]
radeon-gallium: Only build drivers for state trackers that are enabled.
Brian Paul [Thu, 5 Mar 2009 04:03:29 +0000 (21:03 -0700)]
tests: add new mapbufrange.c test to test GL_ARB_map_buffer_range
This only tests the most basic functionality for now.
Brian Paul [Thu, 5 Mar 2009 03:26:23 +0000 (20:26 -0700)]
fix incorrect prototype for glMapBufferRange() in glext.h
Needs to return void *
Robert Ellison [Wed, 4 Mar 2009 23:48:51 +0000 (16:48 -0700)]
i965: add software fallback for conformant 3D textures and GL_CLAMP
The i965 hardware cannot do GL_CLAMP behavior on textures; an earlier
commit forced a software fallback if strict conformance was required
(i.e. the INTEL_STRICT_CONFORMANCE environment variable was set) and
2D textures were used, but it was somewhat flawed - it could trigger
the software fallback even if 2D textures weren't enabled, as long
as one texture unit was enabled.
This fixes that, and adds software fallback for GL_CLAMP behavior with
1D and 3D textures.
It also adds support for a particular setting of the INTEL_STRICT_CONFORMANCE
environment variable, which forces software fallbacks to be taken *all*
the time. This is helpful with debugging. The value is:
export INTEL_STRICT_CONFORMANCE=2
Corbin Simpson [Wed, 4 Mar 2009 23:48:45 +0000 (15:48 -0800)]
radeon-gallium: Enable EGL and Xorg state trackers.
Compile-tested only, but I have high hopes.
Corbin Simpson [Wed, 4 Mar 2009 23:36:42 +0000 (15:36 -0800)]
radeon-gallium: DRI2 state tracker, part 3.
Properly setup the build process for adding in xorg and egl trackers,
and finally put radeon_context and radeon_screen to bed.
Corbin Simpson [Wed, 4 Mar 2009 21:47:44 +0000 (13:47 -0800)]
r300-gallium: Add unaccelerated surface_copy.
Brian Paul [Wed, 4 Mar 2009 23:48:05 +0000 (16:48 -0700)]
mesa: call _mesa_get_cpu_string() to get CPU info for GL_RENDERER string
Brian Paul [Wed, 4 Mar 2009 23:43:07 +0000 (16:43 -0700)]
mesa: call _mesa_get_cpu_features() during one-time-init
Brian Paul [Wed, 4 Mar 2009 23:40:22 +0000 (16:40 -0700)]
mesa: new cpuinfo.c file to init/query cpu info and extensions
Brian Paul [Wed, 4 Mar 2009 23:39:11 +0000 (16:39 -0700)]
mesa: _mesa_get_x86_features() only needs to do its thing once
Jakob Bornecrantz [Wed, 4 Mar 2009 21:41:01 +0000 (22:41 +0100)]
st/xorg: Clean up xorg_exa.c a bit
Jakob Bornecrantz [Wed, 4 Mar 2009 22:51:14 +0000 (23:51 +0100)]
st/xorg: Change format function a bit
Jakob Bornecrantz [Wed, 4 Mar 2009 21:54:33 +0000 (22:54 +0100)]
st/xorg: Fix transfer double free
Jakob Bornecrantz [Wed, 4 Mar 2009 21:04:17 +0000 (22:04 +0100)]
intel: Fixup from refcount changes
Jakob Bornecrantz [Wed, 4 Mar 2009 23:03:27 +0000 (00:03 +0100)]
mesa: Add x86/common_x86.c to libmesagallium.a
Thanks to Brian for the refactor commit
Brian Paul [Wed, 4 Mar 2009 22:56:16 +0000 (15:56 -0700)]
mesa: move sse.h and 3dnow.h #includes
Brian Paul [Wed, 4 Mar 2009 22:46:36 +0000 (15:46 -0700)]
mesa: remove unneeded x86.h header
Brian Paul [Wed, 4 Mar 2009 22:44:38 +0000 (15:44 -0700)]
mesa: make _mesa_init_x86_transform_asm() static
Brian Paul [Wed, 4 Mar 2009 22:39:50 +0000 (15:39 -0700)]
mesa: rename common_x86_macros.h -> x86_xform.h
Brian Paul [Wed, 4 Mar 2009 22:35:21 +0000 (15:35 -0700)]
mesa: rename x86.c -> x86_xform.c
Brian Paul [Wed, 4 Mar 2009 22:21:13 +0000 (15:21 -0700)]
mesa: refactor x86 code
Move _mesa_init_all_x86_transform_asm() into x86.c so that common_x86.c
has no dependencies on the vertex transformation code.
Plus some comments and clean-ups.
José Fonseca [Wed, 4 Mar 2009 21:46:12 +0000 (21:46 +0000)]
Merge commit 'origin/master' into gallium-map-range
Keith Whitwell [Wed, 4 Mar 2009 21:35:17 +0000 (21:35 +0000)]
indices: add translate/generate functions for unfilled modes
Most of the time unfilled rendering requires a lot more thought than
just translating triangles to lines or points. But sometimes, you can
do exactly that, and it can be quite a bit quicker. Add code to do the
translation. The caller has to determine whether it's a legal thing
to do in the current state, in particular you'd need:
- culling disabled
- offset disabled
- same front and back fill modes
- possibly other stuff I can't think of.
Keith Whitwell [Wed, 4 Mar 2009 17:41:46 +0000 (17:41 +0000)]
clear-repeat: print fps, use 300x300 window size
Dan Nicholson [Wed, 4 Mar 2009 21:19:32 +0000 (13:19 -0800)]
autoconf: Restore _GNU_SOURCE for all Linux systems
This catches the linux-uclibc case and any others that were being set
prior to
98fcdf3f. Fixes bug 20345.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Patrice Mandin [Wed, 4 Mar 2009 19:38:14 +0000 (20:38 +0100)]
nouveau: oops, forgot to keep the NV10_SIFM object
Patrice Mandin [Wed, 4 Mar 2009 19:34:54 +0000 (20:34 +0100)]
nouveau: Use proper SIFM object on NV30
José Fonseca [Wed, 4 Mar 2009 17:49:52 +0000 (17:49 +0000)]
mesa: Follow ARB_map_buffer_range more stricly.
Namelly, FlushMappedBufferRange takes a subrange relative to the original
range.
José Fonseca [Wed, 4 Mar 2009 17:48:26 +0000 (17:48 +0000)]
gallium: Use consistent semantics for map ranges in gallium.
Which are slightly different from ARB_map_buffer_range semantics, since
gallium still supports more than one mapping of the same buffer.
José Fonseca [Wed, 4 Mar 2009 17:42:36 +0000 (17:42 +0000)]
Merge commit 'origin/master' into gallium-map-range
Keith Whitwell [Wed, 4 Mar 2009 17:01:47 +0000 (17:01 +0000)]
vbo: second attempt - avoid getting buffer_ptr and buffer_map out of sync
José Fonseca [Wed, 4 Mar 2009 16:44:31 +0000 (16:44 +0000)]
Merge commit 'origin/master' into gallium-map-range
José Fonseca [Wed, 4 Mar 2009 16:43:13 +0000 (16:43 +0000)]
mesa: Clear cache->trans after destroying the transfer.
José Fonseca [Wed, 4 Mar 2009 16:43:13 +0000 (16:43 +0000)]
mesa: Clear cache->trans after destroying the transfer.
Brian Paul [Wed, 4 Mar 2009 16:34:46 +0000 (09:34 -0700)]
cell: update cell driver after gallium reference count changes
Keith Whitwell [Wed, 4 Mar 2009 16:09:14 +0000 (16:09 +0000)]
Revert "vbo: avoid getting buffer_ptr and buffer_map out of sync"
This fixed a minor bug but broke everything else.
This reverts commit
579ef8ab1984d895867f547afa60b3bec4c4599a.
José Fonseca [Wed, 4 Mar 2009 16:07:51 +0000 (16:07 +0000)]
gallium: Ensure map ranges are valid.
Keith Whitwell [Wed, 4 Mar 2009 16:06:05 +0000 (16:06 +0000)]
vbo: avoid getting buffer_ptr and buffer_map out of sync
José Fonseca [Wed, 4 Mar 2009 15:23:35 +0000 (15:23 +0000)]
Merge commit 'origin/master' into gallium-map-range
Keith Whitwell [Wed, 4 Mar 2009 15:15:43 +0000 (15:15 +0000)]
vbo: use FLUSH_UPDATE_CURRENT flag to indicate whether the vbo module is active
Add asserts for expected values on wakeup and flush. Remove cases where
this flag is set or cleared except when waking up and flushing vbo module.
Brian Paul [Wed, 4 Mar 2009 14:57:40 +0000 (07:57 -0700)]
mesa: include mfeatures.h
See bug 20319.
José Fonseca [Wed, 4 Mar 2009 11:59:00 +0000 (11:59 +0000)]
mesa: Implement and use FlushMappedBufferRange.
Michel Dänzer [Wed, 4 Mar 2009 10:58:52 +0000 (11:58 +0100)]
gallium: Remove some superfluous instances of #include "p_inlines.h".
Michel Dänzer [Wed, 4 Mar 2009 10:58:48 +0000 (11:58 +0100)]
gallium: Unify reference counting.
The core reference counting code is centralized in p_refcnt.h.
This has some consequences related to struct pipe_buffer:
* The screen member of struct pipe_buffer must be initialized, or
pipe_buffer_reference() will crash trying to destroy a buffer with reference
count 0. u_simple_screen takes care of this, but I may have missed some of
the drivers not using it.
* Except for rare exceptions deep in winsys code, buffers must always be
allocated via pipe_buffer_create() or via screen->*buffer_create() rather
than via winsys->*buffer_create().
Corbin Simpson [Wed, 4 Mar 2009 06:11:56 +0000 (22:11 -0800)]
r300-gallium, radeon-gallium: Continue migration to DRI2 state_tracker, part 2.
Almost there. glxinfo still works, and AFAICT so does trivial/clear.
Corbin Simpson [Wed, 4 Mar 2009 05:14:33 +0000 (21:14 -0800)]
r300-gallium, radeon-gallium: Begin migration to DRI2 state tracker, part 1.
s/migration/migrane/ , actually. Anyway, this has working glxinfo...
Brian Paul [Wed, 4 Mar 2009 03:45:45 +0000 (20:45 -0700)]
mesa: include main/dd.h in t_vb_points.c and t_vp_build.c
For some reason makedepend doesn't seem to find the dependency on this
header in these two files. Directly including the header is a work-around.
Jakob Bornecrantz [Tue, 3 Mar 2009 23:36:59 +0000 (00:36 +0100)]
st/dri2: Fake frontbuffer changes
Front buffer rendering works as it stands but it completely
wrong. But as it stands fake front buffer rendering is
completely broken. So we keep it as it is. But lets atleast
handle it in the get buffers code.
Jakob Bornecrantz [Tue, 3 Mar 2009 23:35:33 +0000 (00:35 +0100)]
st/dri2: Hook up flush_frontbuffer
Doesn't do anything because we can't tell the X server about
any changes to the fake front buffer.
Jakob Bornecrantz [Tue, 3 Mar 2009 23:31:35 +0000 (00:31 +0100)]
st/dri2: We are strictly a dri2 driver
Jakob Bornecrantz [Tue, 3 Mar 2009 20:56:10 +0000 (21:56 +0100)]
st/drm: s/hocks/hooks/
Brian Paul [Tue, 3 Mar 2009 21:01:49 +0000 (14:01 -0700)]
gallium: remove old state tracker renderbuffer attachment assertion
Not needed since renderbuffers are ref-counted.
Fixes progs/demos/shadowtex.
Brian Paul [Tue, 3 Mar 2009 21:01:10 +0000 (14:01 -0700)]
xlib: code to force fixed function -> shader translation (for debug, disabled)
Brian Paul [Tue, 3 Mar 2009 20:52:24 +0000 (13:52 -0700)]
mesa: fix sw fallback state validation bug
When a hw driver fell back to swrast, swrast wasn't always getting informed
of program changes. When fixed function is translated into shaders, flags
like _NEW_LIGHT, _NEW_TEXTURE, etc. should really signal _NEW_PROGRAM.
In this case, swrast wasn't seeing _NEW_PROGRAM when new fragment shaders
were generated.
José Fonseca [Tue, 3 Mar 2009 18:52:51 +0000 (18:52 +0000)]
mesa: Massage the interface to more closely resemble ARB_map_buffer_range
José Fonseca [Tue, 3 Mar 2009 18:52:16 +0000 (18:52 +0000)]
gallium: Massage the interface to more closely resemble ARB_map_buffer_range
José Fonseca [Tue, 3 Mar 2009 17:54:38 +0000 (17:54 +0000)]
wgl: Support the same combinations of single buffer pixel formats.
José Fonseca [Tue, 3 Mar 2009 15:43:12 +0000 (15:43 +0000)]
Merge commit 'origin/master' into gallium-map-range
Keith Whitwell [Tue, 3 Mar 2009 15:39:51 +0000 (15:39 +0000)]
demos/engine: respect display list mode when drawing pistons
Dan Nicholson [Tue, 3 Mar 2009 14:55:15 +0000 (06:55 -0800)]
autoconf: Update config.guess and config.sub from upstream
Grabbed the latest copies from the GNU config repo at
http://git.savannah.gnu.org/cgit/config.git .
José Fonseca [Tue, 3 Mar 2009 13:18:15 +0000 (13:18 +0000)]
Merge commit 'origin/master' into gallium-map-range
José Fonseca [Tue, 3 Mar 2009 12:26:21 +0000 (12:26 +0000)]
Merge commit 'origin/gallium-0.1'
Conflicts:
src/gallium/auxiliary/pipebuffer/pb_buffer_fenced.c
José Fonseca [Tue, 3 Mar 2009 12:22:59 +0000 (12:22 +0000)]
pipebuffer: Cleanup merge.
Keith Whitwell [Tue, 3 Mar 2009 12:11:08 +0000 (12:11 +0000)]
winsys: return null for DONTBLOCK flag on existing winsys
Add code so that existing driver behaviour doesn't change.