OSDN Git Service
Stefan Hajnoczi [Tue, 7 Nov 2023 01:41:42 +0000 (09:41 +0800)]
Merge tag 'pull-hv-balloon-
20231106' of https://github.com/maciejsszmigiero/qemu into staging
Hyper-V Dynamic Memory protocol driver.
This driver is like virtio-balloon on steroids for Windows guests:
it allows both changing the guest memory allocation via ballooning and
inserting pieces of extra RAM into it on demand from a provided memory
backend via Windows-native Hyper-V Dynamic Memory protocol.
* Preparatory patches to support empty memory devices and ones with
large alignment requirements.
* Revert of recently added "hw/virtio/virtio-pmem: Replace impossible
check by assertion" commit
5960f254dbb4 since this series makes this
situation possible again.
* Protocol definitions.
* Hyper-V DM protocol driver (hv-balloon) base (ballooning only).
* Hyper-V DM protocol driver (hv-balloon) hot-add support.
* qapi query-memory-devices support for the driver.
* qapi HV_BALLOON_STATUS_REPORT event.
* The relevant PC machine plumbing.
* New MAINTAINERS entry for the above.
# -----BEGIN PGP SIGNATURE-----
#
# iQGzBAABCAAdFiEE4ndqq6COJv9aG0oJUrHW6VHQzgcFAmVI81IACgkQUrHW6VHQ
# zgdzTgv+I5eV2R01YLOBBJhBjzxZ4/BUqkuUHNxHpfjuCqEIzPb7FIfoZ4ZyXZFT
# YJdSE4lPeTZLrmmi/Nt6G0rUKDvdCeIgkS2VLHFSsTV8IzcT71BTRGzV0zAjUF5v
# yDH6uzo6e9gmaziIalRjibUxSDjCQmoCifms2rS2DwazADudUp+naGfm+3uyA0gM
# raOfBfRkNZsDqhXg2ayuqPIES75xQONoON9xYPKDAthS48POEbqtWBKuFopr3kXY
# y0eph+NAw+RajCyLYKM3poIgaSu3l4WegInuKQffzqKR8dxrbwPdCmtgo6NSHx0W
# uDfl7FUBnGzrR18VU4ZfTSrF5SVscGwF9EL7uocJen15inJjl1q3G53uZgyGzHLC
# cw8fKMjucmE8njQR2qiMyX0b+T4+9nKO1rykBgTG/+c9prRUVoxYpFCF117Ei0U8
# QzLGACW1oK+LV41bekWAye7w9pShUtFaxffhPbJeZDDGh7q0x61R3Z3yKkA07p46
# /YWWFWUD
# =RAb0
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 06 Nov 2023 22:08:18 HKT
# gpg: using RSA key
E2776AABA08E26FF5A1B4A0952B1D6E951D0CE07
# gpg: Good signature from "Maciej S. Szmigiero <mail@maciej.szmigiero.name>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 727A 0D4D DB9E D9F6 039B ECEF 847F 5E37 90CE 0977
# Subkey fingerprint: E277 6AAB A08E 26FF 5A1B 4A09 52B1 D6E9 51D0 CE07
* tag 'pull-hv-balloon-
20231106' of https://github.com/maciejsszmigiero/qemu:
MAINTAINERS: Add an entry for Hyper-V Dynamic Memory Protocol
hw/i386/pc: Support hv-balloon
qapi: Add HV_BALLOON_STATUS_REPORT event and its QMP query command
qapi: Add query-memory-devices support to hv-balloon
Add Hyper-V Dynamic Memory Protocol driver (hv-balloon) hot-add support
Add Hyper-V Dynamic Memory Protocol driver (hv-balloon) base
Add Hyper-V Dynamic Memory Protocol definitions
memory-device: Drop size alignment check
Revert "hw/virtio/virtio-pmem: Replace impossible check by assertion"
memory-device: Support empty memory devices
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Tue, 7 Nov 2023 01:41:33 +0000 (09:41 +0800)]
Merge tag 'gpu-pull-request' of https://gitlab.com/marcandre.lureau/qemu into staging
GPU pull request
Includes:
- [PATCH] virtio-gpu-rutabaga: Add empty interface to fix arm64 crash
- [PATCH v2 0/4] Misc ati-vga patches
- [PATCH v2 0/5] virtio-gpu: add blob migration support
# -----BEGIN PGP SIGNATURE-----
#
# iQJQBAABCAA6FiEEh6m9kz+HxgbSdvYt2ujhCXWWnOUFAmVI6rYcHG1hcmNhbmRy
# ZS5sdXJlYXVAcmVkaGF0LmNvbQAKCRDa6OEJdZac5VdjEAC6xsnITkX5FgJVjDo2
# XQWGz2MgWIFcqMXYVbz21UgY86KjCE7jVbGL6BkWO8N/XzsP6EUEIcUcHm7KcdwU
# +csMTjgnZUb97Ov/d27Ge9UYr/9rgozyoQRwvvQYXRFfxTur+b+poodcAOn3Ml3Q
# vXBTYb0z2FYd85VcVx59w5lFlonER1z4wnQuF4GLCBNIW/GX+S87+xyv1FZCgWku
# luBhWa7ihVrlrYA2UaoQS7sI2ch/wI9NnfP1p+31Iy/w1wLwQOj9ofTslbehTcvS
# uDU/+WMkhmlB8LOl7mx8bGHeBab9iUvSz5H5MIfTgrk6hRaaMJp3y2lefsc9cWuA
# 5aPvj0qouTEkIZ+2aPClcZk11mIbH5lT9eeEYc16Ztrt5VJHXmR7RwF74hHQbxY3
# LDiRlpvhBfX4muaPw4L1max9kJZdOvo9aQVqKL7hkrTBL/xBmvg40ZRrWDrIvZZg
# 8TZ8woD2ORiic/hTxmI7waG+f3WozH/drStJrOFpJA7+iFefrHgkv2K7ze9LhWmZ
# ookM8K96NV6AnPQ39N2nuvQ/Fndqv7Kg4AiOwzj3epfg/rDscaJw9J2JQuCGEiEF
# KEIt3hyIo/HOXXiwmGqP3BWs90EmMvZTDmAt5e/cT0eQ1jWwJ3Tj8ShVg2S8QW0h
# TMXdPV7bepd49aaynpGFeADhfw==
# =k/gN
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 06 Nov 2023 21:31:34 HKT
# gpg: using RSA key
87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg: issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* tag 'gpu-pull-request' of https://gitlab.com/marcandre.lureau/qemu:
Revert "virtio-gpu: block migration of VMs with blob=true"
virtio-gpu: add virtio-gpu/blob vmstate subsection
virtio-gpu: move scanout restoration to post_load
virtio-gpu: factor out restore mapping
virtio-gpu: block migration of VMs with blob=true
ati-vga: Implement fallback for pixman routines
ati-vga: Add 30 bit palette access register
ati-vga: Support unaligned access to GPIO DDC registers
ati-vga: Fix aperture sizes
virtio-gpu-rutabaga: Add empty interface to fix arm64 crash
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Tue, 7 Nov 2023 01:41:24 +0000 (09:41 +0800)]
Merge tag 'pull-xenfv-stable-
20231106' of git://git.infradead.org/users/dwmw2/qemu into staging
Bugfixes for emulated Xen support
Selected bugfixes for mainline and stable, especially to the per-vCPU
local APIC vector delivery mode for event channel notifications, which
was broken in a number of ways.
The xen-block driver has been defaulting to the wrong protocol for x86
guest, and this fixes that — which is technically an incompatible change
but I'm fairly sure nobody relies on the broken behaviour (and in
production I *have* seen guests which rely on the correct behaviour,
which now matches the blkback driver in the Linux kernel).
A handful of other simple fixes for issues which came to light as new
features (qv) were being developed.
# -----BEGIN PGP SIGNATURE-----
#
# iQJIBAABCAAyFiEEvgfZ/VSAmrLEsP9fY3Ys2mfi81kFAmVIvv4UHGR3bXcyQGlu
# ZnJhZGVhZC5vcmcACgkQY3Ys2mfi81nFmRAAvK3VNuGDV56TJqFdtEWD+3jzSZU0
# CoL1mxggvwnlFn1SdHvbC5jl+UscknErcNbqlxMTTg9jQiiQqzFuaWujJnL0dEOY
# RJiS2scKln/1gv9NRbLE31FjPwoNz+zJI/iMvdutjT7Ll//v34jY0vd1Y5Wo53ay
# MBschuuxD1sUUTHNj5f9afrgZaetJfgBSNZraiLR5T2HEadJVJuhItdGxW1+KaPI
# zBIcflIeZmJl9b/L1a2bP3KJmRo8QzHB56X3uzwkPhYhYSU2dnCaJTLCkiNfK+Qh
# SgCBMlzsvJbIZqDA9YPOGdKK1ArfTJRmRDwAkqH0YQknQGoIkpN+7eQiiSv6PMS5
# U/93V7r6MfaftIs6YdWSnFozWeBuyKZL9H2nAXqZgL5t6uEMVR8Un/kFnGfslTFY
# 9gQ1o4IM6ECLiXhIP/sPNOprrbFb0HU7QPtEDJOxrJzBM+IfLbldRHn4p9CccqQA
# LHvJF98VhX1d0nA0iZBT3qqfKPbmUhRV9Jrm+WamqNrRXhiGdF8EidsUf8RWX+JD
# xZWJiqhTwShxdLE6TC/JgFz4cQCVHG8QiZstZUbdq59gtz9YO5PGByMgI3ds7iNQ
# lGXAPFm+1wU85W4dZOH7qyim6d9ytFm2Fm110BKM8l9B6UKEuKHpsxXMqdo65JXI
# 7uBKbVpdPKul0DY=
# =dQ7h
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 06 Nov 2023 18:25:02 HKT
# gpg: using RSA key
BE07D9FD54809AB2C4B0FF5F63762CDA67E2F359
# gpg: issuer "dwmw2@infradead.org"
# gpg: Good signature from "David Woodhouse <dwmw2@infradead.org>" [unknown]
# gpg: aka "David Woodhouse <dwmw2@exim.org>" [unknown]
# gpg: aka "David Woodhouse <david@woodhou.se>" [unknown]
# gpg: aka "David Woodhouse <dwmw2@kernel.org>" [unknown]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: BE07 D9FD 5480 9AB2 C4B0 FF5F 6376 2CDA 67E2 F359
* tag 'pull-xenfv-stable-
20231106' of git://git.infradead.org/users/dwmw2/qemu:
hw/xen: use correct default protocol for xen-block on x86
hw/xen: take iothread mutex in xen_evtchn_reset_op()
hw/xen: fix XenStore watch delivery to guest
hw/xen: don't clear map_track[] in xen_gnttab_reset()
hw/xen: select kernel mode for per-vCPU event channel upcall vector
i386/xen: fix per-vCPU upcall vector for Xen emulation
i386/xen: Don't advertise XENFEAT_supervisor_mode_kernel
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Tue, 7 Nov 2023 01:41:10 +0000 (09:41 +0800)]
Merge tag 'q800-for-8.2-pull-request' of https://github.com/vivier/qemu-m68k into staging
Q800 pull request
20231106
macfb: A/UX fixes for colour LUT
# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAmVIoJQSHGxhdXJlbnRA
# dml2aWVyLmV1AAoJEPMMOL0/L748uo0QALGBJCmFWVf/zMdRERqFWXERdZ/dw6H5
# kDN+EIYzzjCVWRK2YFAoihmiMIVQf7IS8j/ViuChWdvvVaWriOnt2yxB8UTCFaME
# 4ZoZKu8wCmsENKtAgdU0hORYUr5sVgYlw4Umu+Jxt62UbH2gpm3Ykyxek2Q0B3OA
# rs8L0Z8YjGALxB8Mf4i/YBREyP+sJDnif2d6wycVf+AXDKBEC7aplKUzYukSd9r5
# 05VZ1hpamef6uQb7oO9O/dq2mk6+FZSw3mkR1bX8aXQf8UAjmm5Q48bKWW/b+frn
# kFWwYYy13TgRsvH7B5wNIWzByGwNxdvIfAwycqPrwxXyNeAhidwGHX8U4SR69IGj
# ayPlIvJ3kBiUyOT49eVAKE2bnO4+MjKzoMehvgfMTRAwrlp/6lIAWnealUAnzKYZ
# k1DvQgZSbF0dgpyj2iiRMJik3gesJyn1YMwwHMJCmmh9PkXqfqp76CTbUzjWU7RF
# 77sXgYwMAvEHUeFhjbh0/BqRlggYf+vX6IUUFjDaU2R8Nb8iMrzM4p/27EghRJ7U
# gW33Z8t8w+TXlUCoHe1ssG0Dx78j1oyKuO9M8LkeHXUXlN2GZAFimCJ6GHfwpoEx
# +QFhFrwE8dBmsRjoRd+JrqxbnJe4LevvUuku5P4Un/TLYJW/XcKs/A1hlj1aL1Pa
# U638/cSVdfhs
# =F4bR
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 06 Nov 2023 16:15:16 HKT
# gpg: using RSA key
CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* tag 'q800-for-8.2-pull-request' of https://github.com/vivier/qemu-m68k:
macfb: allow reads from the DAFB_LUT register
macfb: allow larger write accesses to the DAFB_LUT register
macfb: rename DAFB_RESET to DAFB_LUT_INDEX
macfb: don't clear interrupts when writing to DAFB_RESET
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Marc-André Lureau [Thu, 7 Sep 2023 13:04:58 +0000 (17:04 +0400)]
Revert "virtio-gpu: block migration of VMs with blob=true"
If we decide to apply this patch (for easier backporting reasons), we
can now revert it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Marc-André Lureau [Thu, 7 Sep 2023 13:04:31 +0000 (17:04 +0400)]
virtio-gpu: add virtio-gpu/blob vmstate subsection
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Maciej S. Szmigiero [Sat, 21 Oct 2023 21:14:53 +0000 (23:14 +0200)]
MAINTAINERS: Add an entry for Hyper-V Dynamic Memory Protocol
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Maciej S. Szmigiero [Wed, 23 Aug 2023 21:36:35 +0000 (23:36 +0200)]
hw/i386/pc: Support hv-balloon
Add the necessary plumbing for the hv-balloon driver to the PC machine.
Co-developed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Maciej S. Szmigiero [Wed, 23 Aug 2023 21:34:14 +0000 (23:34 +0200)]
qapi: Add HV_BALLOON_STATUS_REPORT event and its QMP query command
Used by the hv-balloon driver for (optional) guest memory status reports.
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Maciej S. Szmigiero [Wed, 23 Aug 2023 21:31:35 +0000 (23:31 +0200)]
qapi: Add query-memory-devices support to hv-balloon
Used by the driver to report its provided memory state information.
Co-developed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Maciej S. Szmigiero [Sun, 22 Oct 2023 15:20:20 +0000 (17:20 +0200)]
Add Hyper-V Dynamic Memory Protocol driver (hv-balloon) hot-add support
One of advantages of using this protocol over ACPI-based PC DIMM hotplug is
that it allows hot-adding memory in much smaller granularity because the
ACPI DIMM slot limit does not apply.
In order to enable this functionality a new memory backend needs to be
created and provided to the driver via the "memdev" parameter.
This can be achieved by, for example, adding
"-object memory-backend-ram,id=mem1,size=32G" to the QEMU command line and
then instantiating the driver with "memdev=mem1" parameter.
The device will try to use multiple memslots to cover the memory backend in
order to reduce the size of metadata for the not-yet-hot-added part of the
memory backend.
Co-developed-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Maciej S. Szmigiero [Mon, 12 Jun 2023 14:00:54 +0000 (16:00 +0200)]
Add Hyper-V Dynamic Memory Protocol driver (hv-balloon) base
This driver is like virtio-balloon on steroids: it allows both changing the
guest memory allocation via ballooning and (in the next patch) inserting
pieces of extra RAM into it on demand from a provided memory backend.
The actual resizing is done via ballooning interface (for example, via
the "balloon" HMP command).
This includes resizing the guest past its boot size - that is, hot-adding
additional memory in granularity limited only by the guest alignment
requirements, as provided by the next patch.
In contrast with ACPI DIMM hotplug where one can only request to unplug a
whole DIMM stick this driver allows removing memory from guest in single
page (4k) units via ballooning.
After a VM reboot the guest is back to its original (boot) size.
In the future, the guest boot memory size might be changed on reboot
instead, taking into account the effective size that VM had before that
reboot (much like Hyper-V does).
For performance reasons, the guest-released memory is tracked in a few
range trees, as a series of (start, count) ranges.
Each time a new page range is inserted into such tree its neighbors are
checked as candidates for possible merging with it.
Besides performance reasons, the Dynamic Memory protocol itself uses page
ranges as the data structure in its messages, so relevant pages need to be
merged into such ranges anyway.
One has to be careful when tracking the guest-released pages, since the
guest can maliciously report returning pages outside its current address
space, which later clash with the address range of newly added memory.
Similarly, the guest can report freeing the same page twice.
The above design results in much better ballooning performance than when
using virtio-balloon with the same guest: 230 GB / minute with this driver
versus 70 GB / minute with virtio-balloon.
During a ballooning operation most of time is spent waiting for the guest
to come up with newly freed page ranges, processing the received ranges on
the host side (in QEMU and KVM) is nearly instantaneous.
The unballoon operation is also pretty much instantaneous:
thanks to the merging of the ballooned out page ranges 200 GB of memory can
be returned to the guest in about 1 second.
With virtio-balloon this operation takes about 2.5 minutes.
These tests were done against a Windows Server 2019 guest running on a
Xeon E5-2699, after dirtying the whole memory inside guest before each
balloon operation.
Using a range tree instead of a bitmap to track the removed memory also
means that the solution scales well with the guest size: even a 1 TB range
takes just a few bytes of such metadata.
Since the required GTree operations aren't present in every Glib version
a check for them was added to the meson build script, together with new
"--enable-hv-balloon" and "--disable-hv-balloon" configure arguments.
If these GTree operations are missing in the system's Glib version this
driver will be skipped during QEMU build.
An optional "status-report=on" device parameter requests memory status
events from the guest (typically sent every second), which allow the host
to learn both the guest memory available and the guest memory in use
counts.
Following commits will add support for their external emission as
"HV_BALLOON_STATUS_REPORT" QMP events.
The driver is named hv-balloon since the Linux kernel client driver for
the Dynamic Memory Protocol is named as such and to follow the naming
pattern established by the virtio-balloon driver.
The whole protocol runs over Hyper-V VMBus.
The driver was tested against Windows Server 2012 R2, Windows Server 2016
and Windows Server 2019 guests and obeys the guest alignment requirements
reported to the host via DM_CAPABILITIES_REPORT message.
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Maciej S. Szmigiero [Mon, 12 Jun 2023 14:00:53 +0000 (16:00 +0200)]
Add Hyper-V Dynamic Memory Protocol definitions
This commit adds Hyper-V Dynamic Memory Protocol definitions, taken
from hv_balloon Linux kernel driver, adapted to the QEMU coding style and
definitions.
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
David Hildenbrand [Thu, 22 Jun 2023 10:49:19 +0000 (12:49 +0200)]
memory-device: Drop size alignment check
There is no strong requirement that the size has to be multiples of the
requested alignment, let's drop it. This is a preparation for hv-baloon.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Maciej S. Szmigiero [Mon, 6 Nov 2023 12:53:59 +0000 (13:53 +0100)]
Revert "hw/virtio/virtio-pmem: Replace impossible check by assertion"
This reverts commit
5960f254dbb46f0c7a9f5f44bf4d27c19c34cb97 since the
previous commit made this situation possible again.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Marc-André Lureau [Thu, 7 Sep 2023 13:02:53 +0000 (17:02 +0400)]
virtio-gpu: move scanout restoration to post_load
As we are going to introduce an extra subsection for "blob" resources,
scanout have to be restored after.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Marc-André Lureau [Thu, 7 Sep 2023 13:00:53 +0000 (17:00 +0400)]
virtio-gpu: factor out restore mapping
The same function is going to be used next to restore "blob" resources.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Marc-André Lureau [Wed, 6 Sep 2023 13:00:22 +0000 (17:00 +0400)]
virtio-gpu: block migration of VMs with blob=true
"blob" resources don't have an associated pixman image:
#0 pixman_image_get_stride (image=0x0) at ../pixman/pixman-image.c:921
#1 0x0000562327c25236 in virtio_gpu_save (f=0x56232bb13b00, opaque=0x56232b555a60, size=0, field=0x5623289ab6c8 <__compound_literal.3+104>, vmdesc=0x56232ab59fe0) at ../hw/display/virtio-gpu.c:1225
Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=
2236353
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
BALATON Zoltan [Wed, 1 Nov 2023 20:45:39 +0000 (21:45 +0100)]
ati-vga: Implement fallback for pixman routines
Pixman routines can fail if no implementation is available and it will
become optional soon so add fallbacks when pixman does not work.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <
ed0fba3f74e48143f02228b83bf8796ca49f3e7d.
1698871239.git.balaton@eik.bme.hu>
BALATON Zoltan [Wed, 1 Nov 2023 20:45:38 +0000 (21:45 +0100)]
ati-vga: Add 30 bit palette access register
Radeon cards have a 30 bit DAC and corresponding palette register to
access it. We only use 8 bits but let the guests use 10 bit color
values for those that access it through this register.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <
9fa19eec95d1563cc65853cf26912f230c702b32.
1698871239.git.balaton@eik.bme.hu>
BALATON Zoltan [Wed, 1 Nov 2023 20:45:37 +0000 (21:45 +0100)]
ati-vga: Support unaligned access to GPIO DDC registers
The GPIO_VGA_DDC and GPIO_DVI_DDC registers are used on Radeon for DDC
access. Some drivers like the PPC Mac FCode ROM uses unaligned writes
to these registers so implement this the same way as already done for
GPIO_MONID which is used the same way for the Rage 128 Pro.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <
dff6ce16ccabdfd54ffda348bf57c6d8b810cd98.
1698871239.git.balaton@eik.bme.hu>
BALATON Zoltan [Wed, 1 Nov 2023 20:45:36 +0000 (21:45 +0100)]
ati-vga: Fix aperture sizes
Apparently these should be half the memory region sizes confirmed at
least by Radeon FCocde ROM while Rage 128 Pro ROMs don't seem to use
these. Linux r100 DRM driver also checks for a bit in HOST_PATH_CNTL
so we also add that even though the FCode ROM does not seem to set it.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <
d077d4f90d19db731df78da6f05058db074cada1.
1698871239.git.balaton@eik.bme.hu>
Cong Liu [Tue, 31 Oct 2023 01:25:15 +0000 (09:25 +0800)]
virtio-gpu-rutabaga: Add empty interface to fix arm64 crash
Add an empty element to the interfaces array, which is consistent with
the behavior of other devices in qemu and fixes the crash on arm64.
0 0x0000fffff5c18550 in () at /usr/lib64/libc.so.6
1 0x0000fffff6c9cd6c in g_strdup () at /usr/lib64/libglib-2.0.so.0
2 0x0000aaaaab4945d8 in g_strdup_inline (str=<optimized out>) at /usr/include/glib-2.0/glib/gstrfuncs.h:321
3 type_new (info=info@entry=0xaaaaabc1b2c8 <virtio_gpu_rutabaga_pci_info>) at ../qom/object.c:133
4 0x0000aaaaab494f14 in type_register_internal (info=0xaaaaabc1b2c8 <virtio_gpu_rutabaga_pci_info>) at ../qom/object.c:143
5 type_register (info=0xaaaaabc1b2c8 <virtio_gpu_rutabaga_pci_info>) at ../qom/object.c:152
6 type_register_static (info=0xaaaaabc1b2c8 <virtio_gpu_rutabaga_pci_info>) at ../qom/object.c:157
7 type_register_static_array (infos=<optimized out>, nr_infos=<optimized out>) at ../qom/object.c:165
8 0x0000aaaaab6147e8 in module_call_init (type=type@entry=MODULE_INIT_QOM) at ../util/module.c:109
9 0x0000aaaaab10a0ec in qemu_init_subsystems () at ../system/runstate.c:817
10 0x0000aaaaab10d334 in qemu_init (argc=13, argv=0xfffffffff198) at ../system/vl.c:2760
11 0x0000aaaaaae4da6c in main (argc=<optimized out>, argv=<optimized out>) at ../system/main.c:47
Signed-off-by: Cong Liu <liucong2@kylinos.cn>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <
20231031012515.15504-1-liucong2@kylinos.cn>
David Woodhouse [Fri, 20 Oct 2023 17:00:18 +0000 (18:00 +0100)]
hw/xen: use correct default protocol for xen-block on x86
Even on x86_64 the default protocol is the x86-32 one if the guest doesn't
specifically ask for x86-64.
Cc: qemu-stable@nongnu.org
Fixes:
b6af8926fb85 ("xen: add implementations of xen-block connect and disconnect functions...")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
David Woodhouse [Tue, 24 Oct 2023 21:22:47 +0000 (22:22 +0100)]
hw/xen: take iothread mutex in xen_evtchn_reset_op()
The xen_evtchn_soft_reset() function requires the iothread mutex, but is
also called for the EVTCHNOP_reset hypercall. Ensure the mutex is taken
in that case.
Cc: qemu-stable@nongnu.org
Fixes:
a15b10978fe6 ("hw/xen: Implement EVTCHNOP_reset")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
David Woodhouse [Tue, 17 Oct 2023 12:34:18 +0000 (13:34 +0100)]
hw/xen: fix XenStore watch delivery to guest
When fire_watch_cb() found the response buffer empty, it would call
deliver_watch() to generate the XS_WATCH_EVENT message in the response
buffer and send an event channel notification to the guest… without
actually *copying* the response buffer into the ring. So there was
nothing for the guest to see. The pending response didn't actually get
processed into the ring until the guest next triggered some activity
from its side.
Add the missing call to put_rsp().
It might have been slightly nicer to call xen_xenstore_event() here,
which would *almost* have worked. Except for the fact that it calls
xen_be_evtchn_pending() to check that it really does have an event
pending (and clear the eventfd for next time). And under Xen it's
defined that setting that fd to O_NONBLOCK isn't guaranteed to work,
so the emu implementation follows suit.
This fixes Xen device hot-unplug.
Cc: qemu-stable@nongnu.org
Fixes:
0254c4d19df ("hw/xen: Add xenstore wire implementation and implementation stubs")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
David Woodhouse [Wed, 18 Oct 2023 12:31:20 +0000 (13:31 +0100)]
hw/xen: don't clear map_track[] in xen_gnttab_reset()
The refcounts actually correspond to 'active_ref' structures stored in a
GHashTable per "user" on the backend side (mostly, per XenDevice).
If we zero map_track[] on reset, then when the backend drivers get torn
down and release their mapping we hit the assert(s->map_track[ref] != 0)
in gnt_unref().
So leave them in place. Each backend driver will disconnect and reconnect
as the guest comes back up again and reconnects, and it all works out OK
in the end as the old refs get dropped.
Cc: qemu-stable@nongnu.org
Fixes:
de26b2619789 ("hw/xen: Implement soft reset for emulated gnttab")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
David Woodhouse [Wed, 11 Oct 2023 23:06:26 +0000 (00:06 +0100)]
hw/xen: select kernel mode for per-vCPU event channel upcall vector
A guest which has configured the per-vCPU upcall vector may set the
HVM_PARAM_CALLBACK_IRQ param to fairly much anything other than zero.
For example, Linux v6.0+ after commit
b1c3497e604 ("x86/xen: Add support
for HVMOP_set_evtchn_upcall_vector") will just do this after setting the
vector:
/* Trick toolstack to think we are enlightened. */
if (!cpu)
rc = xen_set_callback_via(1);
That's explicitly setting the delivery to GSI#1, but it's supposed to be
overridden by the per-vCPU vector setting. This mostly works in Qemu
*except* for the logic to enable the in-kernel handling of event channels,
which falsely determines that the kernel cannot accelerate GSI delivery
in this case.
Add a kvm_xen_has_vcpu_callback_vector() to report whether vCPU#0 has
the vector set, and use that in xen_evtchn_set_callback_param() to
enable the kernel acceleration features even when the param *appears*
to be set to target a GSI.
Preserve the Xen behaviour that when HVM_PARAM_CALLBACK_IRQ is set to
*zero* the event channel delivery is disabled completely. (Which is
what that bizarre guest behaviour is working round in the first place.)
Cc: qemu-stable@nongnu.org
Fixes:
91cce756179 ("hw/xen: Add xen_evtchn device for event channel emulation")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
David Woodhouse [Wed, 11 Oct 2023 22:30:08 +0000 (23:30 +0100)]
i386/xen: fix per-vCPU upcall vector for Xen emulation
The per-vCPU upcall vector support had three problems. Firstly it was
using the wrong hypercall argument and would always return -EFAULT when
the guest tried to set it up. Secondly it was using the wrong ioctl() to
pass the vector to the kernel and thus the *kernel* would always return
-EINVAL. Finally, even when delivering the event directly from userspace
with an MSI, it put the destination CPU ID into the wrong bits of the
MSI address.
Linux doesn't (yet) use this mode so it went without decent testing
for a while.
Cc: qemu-stable@nongnu.org
Fixes:
105b47fdf2d0 ("i386/xen: implement HVMOP_set_evtchn_upcall_vector")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
David Woodhouse [Tue, 8 Aug 2023 16:58:46 +0000 (17:58 +0100)]
i386/xen: Don't advertise XENFEAT_supervisor_mode_kernel
This confuses lscpu into thinking it's running in PVH mode.
Cc: qemu-stable@nongnu.org
Fixes:
bedcc139248 ("i386/xen: implement HYPERVISOR_xen_version")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Stefan Hajnoczi [Mon, 6 Nov 2023 01:34:22 +0000 (09:34 +0800)]
Merge tag 'pull-sp-
20231105' of https://gitlab.com/rth7680/qemu into staging
target/sparc: Explicitly compute condition codes
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmVH9oodHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV/M8QgAgPTp/wFLVnSRFLaN
# fBoelVhM4WTWMQ+SUwZMtCvqcMHaBxIMu+hyk5MI11hFOUi9N+vWvRb+NZ6JbK+1
# sqWcx0NdYfNdOeoi1dgzGgcCkFA8u9zW/K7Ih0W8WuU20uiJ4Zw/qmnEELIl/mZR
# 5Ft1mhLMhQSYsH0KSypugLWBxR9SFNH1cV3C1SG2q+6snm/mhKk9NN18zJGFdmmY
# 4CQThx159P/DaPUONZbSAMN94opu6K8FSymELPDUZBYwJRq7fyGKYuDUGRvN1kxx
# I8p/MF1V5Vcth9lvGyBYulFWjo9BDMpkIdmWzXZLOWfzZVAed8PcglxoQqgMbU5u
# eyY/Cw==
# =Tv1h
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 06 Nov 2023 04:09:46 HKT
# gpg: using RSA key
7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* tag 'pull-sp-
20231105' of https://gitlab.com/rth7680/qemu: (21 commits)
target/sparc: Check for invalid cond in gen_compare_reg
target/sparc: Implement UDIV inline
target/sparc: Implement UDIVX and SDIVX inline
target/sparc: Discard cpu_cond at the end of each insn
target/sparc: Record entire jump condition in DisasContext
target/sparc: Merge gen_op_next_insn into only caller
target/sparc: Pass displacement to advance_jump_cond
target/sparc: Merge advance_jump_uncond_{never,always} into advance_jump_cond
target/sparc: Merge gen_branch2 into advance_pc
target/sparc: Do flush_cond in advance_jump_cond
target/sparc: Always copy conditions into a new temporary
target/sparc: Change DisasCompare.c2 to int
target/sparc: Remove DisasCompare.is_bool
target/sparc: Remove CC_OP leftovers
target/sparc: Remove CC_OP_TADDTV, CC_OP_TSUBTV
target/sparc: Remove CC_OP_SUB, CC_OP_SUBX, CC_OP_TSUB
target/sparc: Remove CC_OP_ADD, CC_OP_ADDX, CC_OP_TADD
target/sparc: Remove CC_OP_DIV
target/sparc: Remove CC_OP_LOGIC
target/sparc: Split psr and xcc into components
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Mon, 6 Nov 2023 00:37:22 +0000 (08:37 +0800)]
Merge tag 'migration-
20231103-pull-request' of https://gitlab.com/juan.quintela/qemu into staging
Migration Pull request (
20231103)
Hi
In this PULL:
- dirty limit fixes (hyman)
- coverity issues (juan)
Please apply.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEGJn/jt6/WMzuA0uC9IfvGFhy1yMFAmVE4dgACgkQ9IfvGFhy
# 1yPBgxAAvrsCHwU6/m9y+XGokyHTKKKIVysLip/14jAjDL+viLYgxdVyOGQKQGBa
# +yV+XHTaEyKdihKG4Z5nWuC0yM+sdZQpWXQAcHJLPaPs5wDGICICpdAFY2LbAWSK
# jtX9uq7crywIL4mVKiX+HOjRUPCAYUx/2TcqJf2+0+MKDEVC33ikxNbcx8ZELY+Q
# +hGyOws3mkHSQjyaNUVgnnQtGzikYqcNO2efa+zVPdXYd+TUWW2e9I++Qf48r0Hv
# OqeZAB7bSAb39PNRuj0I1gt4d3WTHzHt7BSpX1OuFqQnzLw8vS5iDQH943WAyGkY
# NblZVb8pyzSg1Jy18H/SmrJDXeufRwqFwD+1NHyxGjsF89KOuVUqGrGpRXhMBtmA
# DSzdgn5jqW5lI1po9FqGdlPTFlhstpMH3DSfPQWurvJh42oM38gmSEHLBNpc4tXo
# 8udMYI09H/kHUoNMTZNGjnZO9LfarGsag6eOJP1bMMublhRlKCaL9RIyV9oOHycE
# IeOeQFeBP/BmYFLWbVPeZej7uiqsEc7VPDJK2QXns210UYanaWmggkmpdAr0I0EV
# pEKHSfVv1qlIlFH4d7MhcJzP2/rY62EC5tYQjT0UaBnCRcDInKrNWa3kbDL0akwr
# 0aJgpbT5ipknVChtwnMWJlbqpeW/VUF5g0jVpYQ3jbe/Zf+OtmU=
# =Pv8z
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 03 Nov 2023 20:04:40 HKT
# gpg: using RSA key
1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [full]
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* tag 'migration-
20231103-pull-request' of https://gitlab.com/juan.quintela/qemu:
migration: Unlock mutex in error case
docs/migration: Add the dirty limit section
tests/migration: Introduce dirty-limit into guestperf
tests/migration: Introduce dirty-ring-size option into guestperf
tests: Add migration dirty-limit capability test
system/dirtylimit: Drop the reduplicative check
system/dirtylimit: Fix a race situation
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Mon, 6 Nov 2023 00:36:47 +0000 (08:36 +0800)]
Merge tag 'dump-pull-request' of https://gitlab.com/marcandre.lureau/qemu into staging
dump queue
Hi
The "dump" queue, with:
- [PATCH v3 qemu 0/3] Allow dump-guest-memory to output standard kdump format
- [PATCH v2 0/5] dump: Minor fixes & improvements
# -----BEGIN PGP SIGNATURE-----
#
# iQJQBAABCAA6FiEEh6m9kz+HxgbSdvYt2ujhCXWWnOUFAmVEmsEcHG1hcmNhbmRy
# ZS5sdXJlYXVAcmVkaGF0LmNvbQAKCRDa6OEJdZac5YNkD/sFnz+I75mn6+DIdC3x
# aSVUU87JxAvWkt+G3KYGS+de2+g2YkRkPwwrIsIceiX7mlL4Es350AVcTl7+fXpu
# Jl9k9I32QI+U3pNXo9BStIqjKUMBxmmKs4aLCh9OHJ6oliTCG+aJTUmSl/dABIuw
# fAcW9vjhyR4ogAp8x7WhR6PKEAAb6OE/9k0w/z0GV2K09N/R0pPAvObQ36VQJ/Cl
# 6DN8tRRytl0IQmC/mZZ+MQPQ5cvamK78X3DmnYCGtyN9HTQERfUFMSSgD/sHLvNi
# rMKuwhXiGQfDs/xQ9Z6Vh2AL7JfAwbIQwUstepb78M/5GBLaZfwFYG4+eCohJE82
# s0GOQ45Yks+AOTGj6lNyOfJ8PIf0SocCTbnLWZicpdHIfoEkSmmL0VZ5w+w0EpDO
# WOZJRpANJGTLhKNb//X3A3OJ05LoavN3/criokhC19DW/yE/VEGd3dXlP6yvFOku
# vGUINGivg1bw7yO0S/rzXNw4+cHCPgBCXbKCNuMI6B+dxL5pUR5Zr4OqcYgwejqE
# RWMdqsHA4ohpzc3AfbuHLFilXJNAgLR3jAEiVUXyrz9U1FiYEiq/8RNuupe9Uveq
# pO1PDZ9fher0Zda4y28bHl/e5M9hVeCFqElcVk0FQGt97T5olVvSaL/hFUPf65ls
# 8A3lN6WaAT9dvM33pkeswZvGxg==
# =eSbp
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 03 Nov 2023 15:01:21 HKT
# gpg: using RSA key
87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg: issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* tag 'dump-pull-request' of https://gitlab.com/marcandre.lureau/qemu:
dump: Drop redundant check for empty dump
dump: Improve some dump-guest-memory error messages
dump: Recognize "fd:" protocols on Windows hosts
dump: Fix g_array_unref(NULL) in dump-guest-memory
dump: Rename qmp_dump_guest_memory() parameter to match QAPI schema
dump: Add command interface for kdump-raw formats
dump: Allow directly outputting raw kdump format
dump: Pass DumpState to write_ functions
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Mon, 6 Nov 2023 00:35:47 +0000 (08:35 +0800)]
Merge tag 'pull-loongarch-
20231103' of https://gitlab.com/gaosong/qemu into staging
pull-loongarch-
20231103
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZUSQIgAKCRBAov/yOSY+
# 31aIBADj5FzdUxyFB813SouAiEiyMdI4bN98AunomAk3Kt8PF1XPoP8kPzcjxcMI
# kCW4eoHb12MVs9OclkqFY3VyaxtSD3YSG/h8W9YxaDyU+L/q89RS+J4r6CAZ8ylg
# J4uxs3Lv8nwPEvRb4zITAt8JQllLey1100j/uu4fU0Rx7vUcMA==
# =9RMx
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 03 Nov 2023 14:16:02 HKT
# gpg: using RSA key
B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-
20231103' of https://gitlab.com/gaosong/qemu:
linux-user/loongarch64: Add LASX sigcontext save/restore
linux-user/loongarch64: Add LSX sigcontext save/restore
linux-user/loongarch64: Use abi_{ulong,uint} types
linux-user/loongarch64: setup_sigframe() set 'end' context size 0
linux-user/loongarch64: Fix setup_extcontext alloc wrong fpu_context size
linux-user/loongarch64: Use traps to track LSX/LASX usage
target/loongarch: Support 4K page size
target/loongarch: Implement query-cpu-model-expansion
target/loongarch: Allow user enable/disable LSX/LASX features
target/loongarch: Add cpu model 'max'
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Richard Henderson [Sat, 21 Oct 2023 07:46:33 +0000 (00:46 -0700)]
target/sparc: Check for invalid cond in gen_compare_reg
Consolidate the test here; drop the "inverted logic".
Fix MOVr and FMOVR, which were missing the invalid test.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Mon, 16 Oct 2023 23:16:05 +0000 (16:16 -0700)]
target/sparc: Implement UDIV inline
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Mon, 16 Oct 2023 21:35:05 +0000 (14:35 -0700)]
target/sparc: Implement UDIVX and SDIVX inline
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Mon, 16 Oct 2023 19:24:23 +0000 (12:24 -0700)]
target/sparc: Discard cpu_cond at the end of each insn
If the insn raises no exceptions, there will be no path in which
cpu_cond is used, and so the computation may be optimized away.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Mon, 16 Oct 2023 18:24:32 +0000 (11:24 -0700)]
target/sparc: Record entire jump condition in DisasContext
Use the original condition instead of consuming cpu_cond,
which will now only be live along exception paths.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Mon, 16 Oct 2023 18:07:31 +0000 (11:07 -0700)]
target/sparc: Merge gen_op_next_insn into only caller
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Sat, 21 Oct 2023 07:31:41 +0000 (00:31 -0700)]
target/sparc: Pass displacement to advance_jump_cond
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Mon, 16 Oct 2023 17:59:38 +0000 (10:59 -0700)]
target/sparc: Merge advance_jump_uncond_{never,always} into advance_jump_cond
Handle these via TCG_COND_{ALWAYS,NEVER}.
Allow dc->npc to be variable, using gen_mov_pc_npc.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Mon, 16 Oct 2023 17:32:50 +0000 (10:32 -0700)]
target/sparc: Merge gen_branch2 into advance_pc
The function had only one caller. Canonicalize the cpu_cond
test to TCG_COND_NE, the "natural" sense of its value.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Tue, 17 Oct 2023 04:55:40 +0000 (21:55 -0700)]
target/sparc: Do flush_cond in advance_jump_cond
Do this here instead of in each caller.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Mon, 16 Oct 2023 16:03:10 +0000 (09:03 -0700)]
target/sparc: Always copy conditions into a new temporary
This will allow the condition to live across changes to
the global cc variables.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Mon, 16 Oct 2023 15:55:51 +0000 (08:55 -0700)]
target/sparc: Change DisasCompare.c2 to int
We don't require c2 to be variable, so emphasize that.
We don't currently require c2 to be non-zero, but that will change.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Mon, 16 Oct 2023 15:43:24 +0000 (08:43 -0700)]
target/sparc: Remove DisasCompare.is_bool
Since we're going to feed cpu_cond to another comparison, we don't
reqire a boolean value -- anything non-zero is sufficient.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Sun, 15 Oct 2023 04:55:27 +0000 (21:55 -0700)]
target/sparc: Remove CC_OP leftovers
All instructions have been converted to generate
full condition codes explicitly.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Sun, 15 Oct 2023 04:38:12 +0000 (21:38 -0700)]
target/sparc: Remove CC_OP_TADDTV, CC_OP_TSUBTV
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Sun, 15 Oct 2023 04:23:27 +0000 (21:23 -0700)]
target/sparc: Remove CC_OP_SUB, CC_OP_SUBX, CC_OP_TSUB
These are all related and implementable with common code.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Sun, 15 Oct 2023 04:03:26 +0000 (21:03 -0700)]
target/sparc: Remove CC_OP_ADD, CC_OP_ADDX, CC_OP_TADD
These are all related and implementable with common code.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Sun, 15 Oct 2023 02:44:03 +0000 (19:44 -0700)]
target/sparc: Remove CC_OP_DIV
Return both result and overflow from helper_[us]div.
Compute all flags explicitly in gen_op_[us]divcc.
Marginally improve the INT64_MIN special case in helper_sdiv.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Sun, 15 Oct 2023 03:15:19 +0000 (20:15 -0700)]
target/sparc: Remove CC_OP_LOGIC
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Sun, 15 Oct 2023 01:24:19 +0000 (18:24 -0700)]
target/sparc: Split psr and xcc into components
Step in removing CC_OP: change the representation of CC_OP_FLAGS.
The 8 bits are distributed between 6 variables, which should make
it easy to keep up to date.
The code within cc_helper.c is quite ugly but is only temporary.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Sat, 14 Oct 2023 21:01:08 +0000 (14:01 -0700)]
target/sparc: Introduce cpu_put_psr_icc
Isolate linux-user from changes to icc representation.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Mark Cave-Ayland [Thu, 26 Oct 2023 08:56:50 +0000 (09:56 +0100)]
macfb: allow reads from the DAFB_LUT register
This enables A/UX to correctly retrieve the LUT entries when used with
applications that use the MacOS Device Manager Status (GetEntries) call.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <
20231026085650.917663-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Mark Cave-Ayland [Thu, 26 Oct 2023 08:56:49 +0000 (09:56 +0100)]
macfb: allow larger write accesses to the DAFB_LUT register
The original tests with MacOS showed that only the bottom 8 bits of the DAFB_LUT
register were used when writing to the LUT, however A/UX performs some of its
writes using 4 byte accesses. Expand the address range for the DAFB_LUT register
so that different size accesses write the correct value to the color_palette
array.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <
20231026085650.917663-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Mark Cave-Ayland [Thu, 26 Oct 2023 08:56:48 +0000 (09:56 +0100)]
macfb: rename DAFB_RESET to DAFB_LUT_INDEX
When A/UX uses the MacOS Device Manager Status (GetEntries) call to read the
contents of the CLUT, it is easy to see that the requested index is written to
the DAFB_RESET register. Update the palette_current index with the requested
value, and rename it to DAFB_LUT_INDEX to reflect its true purpose.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <
20231026085650.917663-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Mark Cave-Ayland [Thu, 26 Oct 2023 08:56:47 +0000 (09:56 +0100)]
macfb: don't clear interrupts when writing to DAFB_RESET
Traces from A/UX suggest that this register is only used to reset the framebuffer
LUT (colour lookup table) and not any other device state.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <
20231026085650.917663-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
David Hildenbrand [Thu, 22 Jun 2023 10:18:23 +0000 (12:18 +0200)]
memory-device: Support empty memory devices
Let's support empty memory devices -- memory devices that don't have a
memory device region in the current configuration. hv-balloon with an
optional memdev is the primary use case.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Juan Quintela [Fri, 3 Nov 2023 07:42:45 +0000 (08:42 +0100)]
migration: Unlock mutex in error case
We were not unlocking bitmap mutex on the error case. To fix it
forever change to enclose the code with WITH_QEMU_LOCK_GUARD().
Coverity CID
1523750.
Fixes:
a2326705e5 ("migration: Stop migration immediately in RDMA error paths")
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
20231103074245.55166-1-quintela@redhat.com>
Hyman Huang [Wed, 1 Nov 2023 14:04:09 +0000 (22:04 +0800)]
docs/migration: Add the dirty limit section
The dirty limit feature has been introduced since the 8.1
QEMU release but has not reflected in the document, add a
section for that.
Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
0f2b2c63fec22ea23e4926cdeb567b7a0ebd8152.
1698847223.git.yong.huang@smartx.com>
Hyman Huang [Wed, 1 Nov 2023 14:04:08 +0000 (22:04 +0800)]
tests/migration: Introduce dirty-limit into guestperf
Currently, guestperf does not cover the dirty-limit
migration, support this feature.
Note that dirty-limit requires 'dirty-ring-size' set.
To enable dirty-limit, setting x-vcpu-dirty-limit-period
as 500ms and x-vcpu-dirty-limit as 10MB/s:
$ ./tests/migration/guestperf.py \
--dirty-ring-size 4096 \
--dirty-limit --x-vcpu-dirty-limit-period 500 \
--vcpu-dirty-limit 10 --output output.json \
To run the entire standardized set of dirty-limit-enabled
comparisons, with unix migration:
$ ./tests/migration/guestperf-batch.py \
--dirty-ring-size 4096 \
--dst-host localhost --transport unix \
--filter compr-dirty-limit* --output outputdir
Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <
516e7a55dfc6e33d33510be37eb24223de5dc072.
1697815117.git.yong.huang@smartx.com>
Message-ID: <
e1283565b00b34b0377bbd27bee4bb8fc7c255a8.
1698847223.git.yong.huang@smartx.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Hyman Huang [Wed, 1 Nov 2023 14:04:07 +0000 (22:04 +0800)]
tests/migration: Introduce dirty-ring-size option into guestperf
Dirty ring size configuration is not supported by guestperf tool.
Introduce dirty-ring-size (ranges in [1024, 65536]) option so
developers can play with dirty-ring and dirty-limit feature easier.
To set dirty ring size with 4096 during migration test:
$ ./tests/migration/guestperf.py --dirty-ring-size 4096 xxx
Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
8a388cec5c1f73a34d42515bbc43837e97ee3839.
1698847223.git.yong.huang@smartx.com>
Hyman Huang [Wed, 1 Nov 2023 14:04:06 +0000 (22:04 +0800)]
tests: Add migration dirty-limit capability test
Add migration dirty-limit capability test if kernel support
dirty ring.
Migration dirty-limit capability introduce dirty limit
capability, two parameters: x-vcpu-dirty-limit-period and
vcpu-dirty-limit are introduced to implement the live
migration with dirty limit.
The test case does the following things:
1. start src, dst vm and enable dirty-limit capability
2. start migrate and set cancel it to check if dirty limit
stop working.
3. restart dst vm
4. start migrate and enable dirty-limit capability
5. check if migration satisfy the convergence condition
during pre-switchover phase.
Note that this test case involves many passes, so it runs
in slow mode only.
Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
e55a302df9da7dbc00ad825f47f57c1a756d303e.
1698847223.git.yong.huang@smartx.com>
Hyman Huang [Wed, 1 Nov 2023 14:04:05 +0000 (22:04 +0800)]
system/dirtylimit: Drop the reduplicative check
Checking if dirty limit is in service is done by the
dirtylimit_query_all function, drop the reduplicative
check in the qmp_query_vcpu_dirty_limit function.
Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
df9c3514933ff6750ef88068af18d3054bedf746.
1698847223.git.yong.huang@smartx.com>
Hyman Huang [Wed, 1 Nov 2023 14:04:04 +0000 (22:04 +0800)]
system/dirtylimit: Fix a race situation
Fix a race situation for global variable dirtylimit_state.
Also, replace usleep by g_usleep to increase platform
accessibility to the sleep function.
Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <
27c86239e21eda03d11ce5a3d07da3c229f562e3.
1698847223.git.yong.huang@smartx.com>
Song Gao [Wed, 1 Nov 2023 03:08:16 +0000 (11:08 +0800)]
linux-user/loongarch64: Add LASX sigcontext save/restore
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <
20231101030816.
2353416-7-gaosong@loongson.cn>
Song Gao [Wed, 1 Nov 2023 03:08:15 +0000 (11:08 +0800)]
linux-user/loongarch64: Add LSX sigcontext save/restore
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <
20231101030816.
2353416-6-gaosong@loongson.cn>
Song Gao [Wed, 1 Nov 2023 03:08:14 +0000 (11:08 +0800)]
linux-user/loongarch64: Use abi_{ulong,uint} types
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <
20231101030816.
2353416-5-gaosong@loongson.cn>
Song Gao [Wed, 1 Nov 2023 03:08:13 +0000 (11:08 +0800)]
linux-user/loongarch64: setup_sigframe() set 'end' context size 0
See:
https://github.com/torvalds/linux/blob/master/arch/loongarch/kernel/signal.c
The kernel setup_sigcontext() set end context size 0.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <
20231101030816.
2353416-4-gaosong@loongson.cn>
Song Gao [Wed, 1 Nov 2023 03:08:12 +0000 (11:08 +0800)]
linux-user/loongarch64: Fix setup_extcontext alloc wrong fpu_context size
See:
https://github.com/torvalds/linux/blob/master/arch/loongarch/kernel/signal.c
The alloc size is sizeof(struct target_fpu_context).
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <
20231101030816.
2353416-3-gaosong@loongson.cn>
Richard Henderson [Wed, 1 Nov 2023 03:08:11 +0000 (11:08 +0800)]
linux-user/loongarch64: Use traps to track LSX/LASX usage
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <
20231101030816.
2353416-2-gaosong@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Song Gao [Mon, 23 Oct 2023 02:40:59 +0000 (10:40 +0800)]
target/loongarch: Support 4K page size
The LoongArch kernel supports 4K page size.
Change TARGET_PAGE_BITS to 12.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <
20231023024059.
3858349-1-gaosong@loongson.cn>
Song Gao [Fri, 20 Oct 2023 08:49:25 +0000 (16:49 +0800)]
target/loongarch: Implement query-cpu-model-expansion
Add support for the query-cpu-model-expansion QMP command to LoongArch.
We support query the cpu features.
e.g
la464 and max cpu support LSX/LASX, default enable,
la132 not support LSX/LASX.
1. start with '-cpu max,lasx=off'
(QEMU) query-cpu-model-expansion type=static model={"name":"max"}
{"return": {"model": {"name": "max", "props": {"lasx": false, "lsx": true}}}}
2. start with '-cpu la464,lasx=off'
(QEMU) query-cpu-model-expansion type=static model={"name":"la464"}
{"return": {"model": {"name": "max", "props": {"lasx": false, "lsx": true}}}
3. start with '-cpu la132,lasx=off'
qemu-system-loongarch64: can't apply global la132-loongarch-cpu.lasx=off: Property 'la132-loongarch-cpu.lasx' not found
4. start with '-cpu max,lasx=off' or start with '-cpu la464,lasx=off' query cpu model la132
(QEMU) query-cpu-model-expansion type=static model={"name":"la132"}
{"return": {"model": {"name": "la132"}}}
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <
20231020084925.
3457084-4-gaosong@loongson.cn>
Song Gao [Fri, 20 Oct 2023 08:49:24 +0000 (16:49 +0800)]
target/loongarch: Allow user enable/disable LSX/LASX features
Some users may not need LSX/LASX, this patch allows the user
enable/disable LSX/LASX features.
e.g
'-cpu max,lsx=on,lasx=on' (default);
'-cpu max,lsx=on,lasx=off' (enabled LSX);
'-cpu max,lsx=off,lasx=on' (enabled LASX, LSX);
'-cpu max,lsx=off' (disable LSX and LASX).
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <
20231020084925.
3457084-3-gaosong@loongson.cn>
Song Gao [Fri, 20 Oct 2023 08:49:23 +0000 (16:49 +0800)]
target/loongarch: Add cpu model 'max'
We use cpu la464 for the 'max' cpu.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <
20231020084925.
3457084-2-gaosong@loongson.cn>
Stefan Hajnoczi [Fri, 3 Nov 2023 02:04:12 +0000 (10:04 +0800)]
Merge tag 'pull-target-arm-
20231102' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* linux-user/elfload: Add missing arm64 hwcap values
* stellaris-gamepad: Convert to qdev
* docs/specs: Convert various txt docs to rST
* MAINTAINERS: Make sure that gicv3_internal.h is covered, too
* hw/arm/pxa2xx_gpio: Pass CPU using QOM link property
* hw/watchdog/wdt_imx2: Trace MMIO access and timer activity
* hw/misc/imx7_snvs: Trace MMIO access
* hw/misc/imx6_ccm: Convert DPRINTF to trace events
* hw/i2c/pm_smbus: Convert DPRINTF to trace events
* target/arm: Enable FEAT_MOPS insns in user-mode emulation
* linux-user: Report AArch64 hwcap2 fields above bit 31
* target/arm: Make FEAT_MOPS SET* insns handle Xs == XZR correctly
* target/arm: Fix SVE STR increment
* hw/char/stm32f2xx_usart: implement TX interrupts
* target/arm: Correctly propagate stage 1 BTI guarded bit in a two-stage walk
* xlnx-versal-virt: Add AMD/Xilinx TRNG device
* tag 'pull-target-arm-
20231102' of https://git.linaro.org/people/pmaydell/qemu-arm: (33 commits)
tests/qtest: Introduce tests for AMD/Xilinx Versal TRNG device
hw/arm: xlnx-versal-virt: Add AMD/Xilinx TRNG device
hw/misc: Introduce AMD/Xilix Versal TRNG device
target/arm: Correctly propagate stage 1 BTI guarded bit in a two-stage walk
hw/char/stm32f2xx_usart: Add more definitions for CR1 register
hw/char/stm32f2xx_usart: Update IRQ when DR is written
hw/char/stm32f2xx_usart: Extract common IRQ update code to update_irq()
target/arm: Fix SVE STR increment
target/arm: Make FEAT_MOPS SET* insns handle Xs == XZR correctly
linux-user: Report AArch64 hwcap2 fields above bit 31
target/arm: Enable FEAT_MOPS insns in user-mode emulation
hw/i2c/pm_smbus: Convert DPRINTF to trace events
hw/misc/imx6_ccm: Convert DPRINTF to trace events
hw/misc/imx7_snvs: Trace MMIO access
hw/watchdog/wdt_imx2: Trace timer activity
hw/watchdog/wdt_imx2: Trace MMIO access
hw/arm/pxa2xx_gpio: Pass CPU using QOM link property
MAINTAINERS: Make sure that gicv3_internal.h is covered, too
docs/specs/vmgenid: Convert to rST
docs/specs/vmcoreinfo: Convert to rST
...
Conflicts:
hw/input/stellaris_input.c
The qdev conversion in this pull request ("stellaris-gamepad: Convert
to qdev") eliminates the vmstate_register() call that was converted to
vmstate_register_any() in the conflicting migration pull request.
vmstate_register_any() is no longer necessary now that this device has
been converted to qdev, so take this pull request's version of
stellaris_gamepad.c over the previous pull request's
stellaris_input.c (the file was renamed).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Fri, 3 Nov 2023 01:57:32 +0000 (09:57 +0800)]
Merge tag 'migration-
20231102-pull-request' of https://gitlab.com/juan.quintela/qemu into staging
Migration Pull request (
20231102)
Hi
In this pull request:
- migration reboot mode (steve)
* I disabled the test because our CI don't like programs using so
much shared memory. Searching for a fix.
- test for postcopy recover (fabiano)
- MigrateAddress QAPI (het)
- better return path error handling (peter)
- traces for downtime (peter)
- vmstate_register() check for duplicates (juan)
thomas find better solutions for s390x and ipmi.
now also works on s390x
Please, apply.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEGJn/jt6/WMzuA0uC9IfvGFhy1yMFAmVDipMACgkQ9IfvGFhy
# 1yNYnQ/9E5Cywsoqljqa/9FiKBSII2qMrmkfu6JLKqePnsh5pFZiukbudYRuJCCe
# ZTDEmD0NmKRJbDx2xRU1qx/e6gKJy+gz37KP89Buuh/WwZHPboPYtxQpGvCSiH26
# J3i+1+TgaqmkLzcO35wa8tp6gneQclWeAwKgMvdb4cm2pJEhgWRKI62ccyLzxeve
# UCzFQn60t55ETyVZGnRD4YwdTQvGKH+DPlyTuJOLR3DePuvZd8EdH+ypvB4RLAy7
# 3+CuQOxmF5LRXPbpJuAeOsudbmhhHzrO/yL7ZmsiKQTthsJv+SzC1bO94jhQrawZ
# Q7GCii5KpGq0KnRTRKZRGk6XKwxcYRduXMX3R5tXuVmDmCZsjhXzziU8yEdftph8
# 5TJdk1o0Gb043EFu81mrsQYS+9yJqe6sy6m3PTJaec54cAty5ln+c17WOvpAOaSV
# +1phe05ftuVPmQ3KWhbIR/tCmavNLwEZxpVIfyaKJx04bFbtQ9gRpRyURORX4KXc
# s4WXvNirQEohxYBnP4TPvA09xBTW3V08pk/wRDwt0YDXnLiqCltOuxD8r05K8K4B
# MkCLcWj0g7he2tBkF60oz1KSIE0oTB81um9AzLIv5F2YSYLaJM5BIcoC437MR2f4
# MOR7drR1fP5GsRu/SeU5BWvhVq3IvdOxR7G2MLNRJJvl7ZtGXDc=
# =uaqL
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 02 Nov 2023 19:40:03 HKT
# gpg: using RSA key
1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [full]
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* tag 'migration-
20231102-pull-request' of https://gitlab.com/juan.quintela/qemu: (40 commits)
migration: modify test_multifd_tcp_none() to use new QAPI syntax.
migration: Implement MigrateChannelList to hmp migration flow.
migration: Implement MigrateChannelList to qmp migration flow.
migration: modify migration_channels_and_uri_compatible() for new QAPI syntax
migration: New migrate and migrate-incoming argument 'channels'
migration: Convert the file backend to the new QAPI syntax
migration: convert exec backend to accept MigrateAddress.
migration: convert rdma backend to accept MigrateAddress
migration: convert socket backend to accept MigrateAddress
migration: convert migration 'uri' into 'MigrateAddress'
migration: New QAPI type 'MigrateAddress'
migration: Change ram_dirty_bitmap_reload() retval to bool
tests/migration-test: Add a test for postcopy hangs during RECOVER
migration: Allow network to fail even during recovery
migration: Refactor error handling in source return path
tests/qtest: migration: add reboot mode test
cpr: reboot mode
cpr: relax vhost migration blockers
cpr: relax blockdev migration blockers
migration: per-mode blockers
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tong Ho [Tue, 31 Oct 2023 18:46:11 +0000 (11:46 -0700)]
tests/qtest: Introduce tests for AMD/Xilinx Versal TRNG device
Signed-off-by: Tong Ho <tong.ho@amd.com>
Message-id:
20231031184611.
3029156-4-tong.ho@amd.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tong Ho [Tue, 31 Oct 2023 18:46:10 +0000 (11:46 -0700)]
hw/arm: xlnx-versal-virt: Add AMD/Xilinx TRNG device
Connect the support for Versal True Random Number Generator
(TRNG) device.
Warning: unlike the TRNG component in a real device from the
Versal device familiy, the connected TRNG model is not of
cryptographic grade and is not intended for use cases when
cryptograpically strong TRNG is needed.
Signed-off-by: Tong Ho <tong.ho@amd.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id:
20231031184611.
3029156-3-tong.ho@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tong Ho [Tue, 31 Oct 2023 18:46:09 +0000 (11:46 -0700)]
hw/misc: Introduce AMD/Xilix Versal TRNG device
This adds a non-cryptographic grade implementation of the
model for the True Random Number Generator (TRNG) component
in AMD/Xilinx Versal device family.
This implements all 3 modes defined by the actual hardware
specs, all of which selectable by guest software at will
at anytime:
1) PRNG mode, in which the generated sequence is required to
be reproducible after reseeded by the same 384-bit value
as supplied by guest software.
2) Test mode, in which the generated sequence is required to
be reproducible ater reseeded by the same 128-bit test
seed supplied by guest software.
3) TRNG mode, in which non-reproducible sequence is generated
based on periodic reseed by a suitable entropy source.
This model is only intended for non-real world testing of
guest software, where cryptographically strong PRNG or TRNG
is not needed.
This model supports versions 1 & 2 of the device, with
default to be version 2; the 'hw-version' uint32 property
can be set to 0x0100 to override the default.
Other implemented properties:
- 'forced-prng', uint64
When set to non-zero, mode 3's entropy source is implemented
as a deterministic sequence based on the given value and other
deterministic parameters.
This option allows the emulation to test guest software using
mode 3 and to reproduce data-dependent defects.
- 'fips-fault-events', uint32, bit-mask
bit 3: Triggers the SP800-90B entropy health test fault irq
bit 1: Triggers the FIPS 140-2 continuous test fault irq
Signed-off-by: Tong Ho <tong.ho@amd.com>
Message-id:
20231031184611.
3029156-2-tong.ho@amd.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Markus Armbruster [Tue, 31 Oct 2023 10:45:31 +0000 (11:45 +0100)]
dump: Drop redundant check for empty dump
dump_init() first computes the size of the dump, taking the filter
area into account, and fails if its zero. It then looks for memory in
the filter area, and fails if there is none.
This is redundant: if the size of the dump is zero, there is no
memory, and vice versa. Delete this check.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <
20231031104531.
3169721-6-armbru@redhat.com>
Markus Armbruster [Tue, 31 Oct 2023 10:45:30 +0000 (11:45 +0100)]
dump: Improve some dump-guest-memory error messages
Zero @length is rejected with "Invalid parameter 'length'". Improve
to "parameter 'length' expects a non-zero length".
qemu_open_old() is a wrapper around qemu_open_internal() that throws
away error information. Switch to the wrapper that doesn't:
qemu_create(). Example improvement:
(qemu) dump-guest-memory /dev/fdset/x 0 1
Error: Could not open '/dev/fdset/x': Invalid argument
becomes
Error: Could not parse fdset /dev/fdset/x
@protocol values not starting with "fd:" or "file:" are rejected with
"Invalid parameter 'protocol'". Improve to "parameter 'protocol' must
start with 'file:' or 'fd:'".
While there, make the conditional checking @protocol a little more
obvious.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <
20231031104531.
3169721-5-armbru@redhat.com>
Markus Armbruster [Tue, 31 Oct 2023 10:45:29 +0000 (11:45 +0100)]
dump: Recognize "fd:" protocols on Windows hosts
A few QMP command can work with named file descriptors.
The only way to create a named file descriptor used to be QMP command
getfd, which only works on POSIX hosts. Thus, named file descriptors
were actually usable only there.
They became usable on Windows hosts when we added QMP command
get-win32-socket (commit
4cda177c601 "qmp: add 'get-win32-socket'").
Except in dump-guest-memory, because qmp_dump_guest_memory() compiles
its named file descriptor code only #if !defined(WIN32).
Compile it unconditionally, like we do for the other commands
supporting them.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <
20231031104531.
3169721-4-armbru@redhat.com>
Markus Armbruster [Tue, 31 Oct 2023 10:45:28 +0000 (11:45 +0100)]
dump: Fix g_array_unref(NULL) in dump-guest-memory
When dump_init()'s check for non-zero @length fails, dump_cleanup()
passes null s->string_table_buf to g_array_unref(), which spews "GLib:
g_array_unref: assertion 'array' failed" to stderr.
Guard the g_array_unref().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <
20231031104531.
3169721-3-armbru@redhat.com>
Markus Armbruster [Tue, 31 Oct 2023 10:45:27 +0000 (11:45 +0100)]
dump: Rename qmp_dump_guest_memory() parameter to match QAPI schema
The name of the second parameter differs between QAPI schema and C
implementation: it's @protocol in the former and @file in the latter.
Potentially confusing. Change the C implementation to match the QAPI
schema.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <
20231031104531.
3169721-2-armbru@redhat.com>
Stephen Brennan [Mon, 18 Sep 2023 23:32:33 +0000 (16:32 -0700)]
dump: Add command interface for kdump-raw formats
The QMP dump API represents the dump format as an enumeration. Add three
new enumerators, one for each supported kdump compression, each named
"kdump-raw-*".
For the HMP command line, rather than adding a new flag corresponding to
each format, it seems more human-friendly to add a single flag "-R" to
switch the kdump formats to "raw" mode. The choice of "-R" also
correlates nicely to the "makedumpfile -R" option, which would serve to
reassemble a flattened vmcore.
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[ Marc-André: replace loff_t with off_t, indent fixes ]
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <
20230918233233.
1431858-4-stephen.s.brennan@oracle.com>
Stephen Brennan [Mon, 18 Sep 2023 23:32:32 +0000 (16:32 -0700)]
dump: Allow directly outputting raw kdump format
The flattened format (currently output by QEMU) is used by makedumpfile
only when it is outputting a vmcore to a file which is not seekable. The
flattened format functions essentially as a set of instructions of the
form "seek to the given offset, then write the given bytes out".
The flattened format can be reconstructed using makedumpfile -R, or
makedumpfile-R.pl, but it is a slow process because it requires copying
the entire vmcore. The flattened format can also be directly read by
crash, but still, it requires a lengthy reassembly phase.
To sum up, the flattened format is not an ideal one: it should only be
used on files which are actually not seekable. This is the exact
strategy which makedumpfile uses, as seen in the implementation of
"write_buffer()" in makedumpfile [1]. However, QEMU has always used the
flattened format. For compatibility it is best not to change the default
output format without warning. So, add a flag to DumpState which changes
the output to use the normal (i.e. raw) format. This flag will be added
to the QMP and HMP commands in the next change.
[1]: https://github.com/makedumpfile/makedumpfile/blob/
f23bb943568188a2746dbf9b6692668f5a2ac3b6/makedumpfile.c#L5008-L5040
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[ Marc-André: replace loff_t with off_t ]
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <
20230918233233.
1431858-3-stephen.s.brennan@oracle.com>
Stephen Brennan [Mon, 18 Sep 2023 23:32:31 +0000 (16:32 -0700)]
dump: Pass DumpState to write_ functions
For the next patch, we need a reference to DumpState when writing data.
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <
20230918233233.
1431858-2-stephen.s.brennan@oracle.com>
Peter Maydell [Tue, 31 Oct 2023 17:37:23 +0000 (17:37 +0000)]
target/arm: Correctly propagate stage 1 BTI guarded bit in a two-stage walk
In a two-stage translation, the result of the BTI guarded bit should
be the guarded bit from the first stage of translation, as there is
no BTI guard information in stage two. Our code tried to do this,
but got it wrong, because we currently have two fields where the GP
bit information might live (ARMCacheAttrs::guarded and
CPUTLBEntryFull::extra::arm::guarded), and we were storing the GP bit
in the latter during the stage 1 walk but trying to copy the former
in combine_cacheattrs().
Remove the duplicated storage, and always use the field in
CPUTLBEntryFull; correctly propagate the stage 1 value to the output
in get_phys_addr_twostage().
Note for stable backports: in v8.0 and earlier the field is named
result->f.guarded, not result->f.extra.arm.guarded.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1950
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20231031173723.26582-1-peter.maydell@linaro.org
Hans-Erik Floryd [Mon, 30 Oct 2023 15:15:18 +0000 (16:15 +0100)]
hw/char/stm32f2xx_usart: Add more definitions for CR1 register
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Hans-Erik Floryd <hans-erik.floryd@rt-labs.com>
Message-id:
20231030151528.
1138131-4-hans-erik.floryd@rt-labs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Hans-Erik Floryd [Mon, 30 Oct 2023 15:15:17 +0000 (16:15 +0100)]
hw/char/stm32f2xx_usart: Update IRQ when DR is written
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Hans-Erik Floryd <hans-erik.floryd@rt-labs.com>
Message-id:
20231030151528.
1138131-3-hans-erik.floryd@rt-labs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Hans-Erik Floryd [Mon, 30 Oct 2023 15:15:16 +0000 (16:15 +0100)]
hw/char/stm32f2xx_usart: Extract common IRQ update code to update_irq()
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Hans-Erik Floryd <hans-erik.floryd@rt-labs.com>
Message-id:
20231030151528.
1138131-2-hans-erik.floryd@rt-labs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Tue, 31 Oct 2023 14:32:15 +0000 (07:32 -0700)]
target/arm: Fix SVE STR increment
The previous change missed updating one of the increments and
one of the MemOps. Add a test case for all vector lengths.
Cc: qemu-stable@nongnu.org
Fixes:
e6dd5e782be ("target/arm: Use tcg_gen_qemu_{ld, st}_i128 in gen_sve_{ld, st}r")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id:
20231031143215.29764-1-richard.henderson@linaro.org
[PMM: fixed checkpatch nit]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 30 Oct 2023 17:40:00 +0000 (17:40 +0000)]
target/arm: Make FEAT_MOPS SET* insns handle Xs == XZR correctly
Most of the registers used by the FEAT_MOPS instructions cannot use
31 as a register field value; this is CONSTRAINED UNPREDICTABLE to
NOP or UNDEF (we UNDEF). However, it is permitted for the "source
value" register for the memset insns SET* to be 31, which (as usual
for most data-processing insns) means it should be the zero register
XZR. We forgot to handle this case, with the effect that trying to
set memory to zero with a "SET* Xd, Xn, XZR" sets the memory to
the value that happens to be in the low byte of SP.
Handle XZR when getting the SET* data value from the register file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id:
20231030174000.
3792225-4-peter.maydell@linaro.org
Peter Maydell [Mon, 30 Oct 2023 17:39:59 +0000 (17:39 +0000)]
linux-user: Report AArch64 hwcap2 fields above bit 31
The AArch64 ELF hwcap2 field is 64 bits, but our get_elf_hwcap2()
works with uint32_t, so it accidentally fails to report any hwcaps
over bit 31. Use uint64_t here.
The Arm hwcap2 is only 32 bits (because the ELF format makes these
fields be the size of "long" in the ABI), but since it shares the
prototype declaration for get_elf_hwcap2() it is easier to also
expand it to 64 bits.
The only hwcap fields we implement already that are affected by this
are the HBC and MOPS ones, neither of which were implemented in a
previous release, so this doesn't need backporting to older stable
branches.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id:
20231030174000.
3792225-3-peter.maydell@linaro.org
Peter Maydell [Mon, 30 Oct 2023 17:39:58 +0000 (17:39 +0000)]
target/arm: Enable FEAT_MOPS insns in user-mode emulation
In user-mode emulation, we need to set the SCTLR_EL1.MSCEn
bit to avoid all the FEAT_MOPS insns UNDEFing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20231030174000.
3792225-2-peter.maydell@linaro.org
Bernhard Beschow [Sat, 28 Oct 2023 12:24:14 +0000 (14:24 +0200)]
hw/i2c/pm_smbus: Convert DPRINTF to trace events
Let the trace messages slightly deviate from the function names
("smb" -> "smbus") being traced in order to avoid conflights with the SMB
protocol.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Message-id:
20231028122415.14869-6-shentey@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Bernhard Beschow [Sat, 28 Oct 2023 12:24:13 +0000 (14:24 +0200)]
hw/misc/imx6_ccm: Convert DPRINTF to trace events
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id:
20231028122415.14869-5-shentey@gmail.com
[PMM: Add "Hz" unit indicator to frequency traces]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>