OSDN Git Service
Eric Anholt [Tue, 31 Oct 2017 19:32:57 +0000 (12:32 -0700)]
drm/vc4: Skip ULPS latching when we're in that ULPS state already.
It seems that trying to go from unlatched to unlatched will time out
waiting for STOP, and we can just skip that.
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20171031193258.17373-1-eric@anholt.net
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
Vaishali Thakkar [Wed, 25 Apr 2018 07:09:53 +0000 (12:39 +0530)]
drm/vc4: make function vc4_allocate_bin_bo static
Sparse complains with following warning:
drivers/gpu/drm/vc4/vc4_v3d.c:222:1: warning: symbol
'vc4_allocate_bin_bo' was not declared. Should it be static?
Make vc4_allocate_bin static as it is not used outside of
vc4_v3d.c.
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180425070953.17933-1-vthakkar1994@gmail.com
Eric Anholt [Tue, 24 Apr 2018 00:46:08 +0000 (17:46 -0700)]
drm: Make the prime vmap/vunmap hooks optional.
Some drivers leave these unimplemented, so don't make them have
unimplemented stubs.
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424004610.4637-2-eric@anholt.net
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tom Callaway [Mon, 23 Apr 2018 16:16:39 +0000 (12:16 -0400)]
drm/tinydrm/mi0283qt: Always set rotation value
The PiTFT (ili9340) has a hardware reset circuit that resets only
on power-on and not on each reboot through a gpio like the
rpi-display does. As a result, we need to always apply the
rotation value regardless of the display "on/off" state.
Moved the rotation setting code below out_enable:.
Signed-off-by: Tom Callaway <tcallawa@redhat.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423161639.14420-1-tcallawa@redhat.com
Ville Syrjälä [Fri, 16 Mar 2018 19:04:20 +0000 (21:04 +0200)]
drm: Don't pass the index to drm_property_add_enum()
drm_property_add_enum() can calculate the index itself just fine,
so no point in having the caller pass it in.
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180316190420.26734-1-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Manasi Navare [Thu, 26 Apr 2018 19:27:48 +0000 (12:27 -0700)]
drm/dp: Rename the edp_sdp_header as dp_sdp_header
No functional changes in this patch.
The SDP Header is a generic header for secondary data packets for
both eDP and DP so call it dp_sdp_header. This header gets used for
different SDP types already defined.
Also header bytes 2 and 3 are secondary data packet specific header bytes.
So change the comment to indicate the same.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1524770868-16869-1-git-send-email-manasi.d.navare@intel.com
Philippe CORNU [Thu, 19 Apr 2018 13:28:04 +0000 (15:28 +0200)]
drm/stm: ltdc: fix warnings in ltdc_plane_create()
"make C=1" returns 2 warnings in ltdc_plane_create()
("Using plain integer as NULL pointer"). This patch
fixes them.
Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Yannick Fertré <yannick.fertre@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180419132804.8317-1-philippe.cornu@st.com
Philippe CORNU [Tue, 17 Apr 2018 11:40:26 +0000 (13:40 +0200)]
drm/stm: ltdc: add mode_valid()
Add mode_valid() function to filter modes according to available
pll clock values and "preferred" modes. It is particularly
useful for hdmi modes that require precise pixel clocks.
Note that "preferred" modes are always accepted:
- this is important for panels because panel clock tolerances are
bigger than hdmi ones and there is no reason to not accept them
(the fps may vary a little but it is not a problem).
- the hdmi preferred mode will be accepted too, but userland will
be able to use others hdmi "valid" modes if necessary.
Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Yannick Fertré <yannick.fertre@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180417114026.8709-1-philippe.cornu@st.com
Philippe CORNU [Tue, 17 Apr 2018 11:34:41 +0000 (13:34 +0200)]
drm/stm: ltdc: fix deferred endpoint management
When a driver related to one of the endpoints is deferred
due to probe dependencies (i2c, spi...) but the other one
is ready, ltdc probe continues and the deferred driver
will never be probed again.
The fix consists in waiting for all deferred endpoints before
continuing the ltdc probe.
Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Yannick Fertré <yannick.fertre@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180417113441.8214-1-philippe.cornu@st.com
Gerd Hoffmann [Fri, 20 Apr 2018 07:19:04 +0000 (09:19 +0200)]
qxl: drop dummy functions
These days drm core checks function pointers everywhere before calling
them. So we can drop a bunch of dummy functions now.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180420071904.24276-5-kraxel@redhat.com
Gerd Hoffmann [Fri, 20 Apr 2018 07:19:03 +0000 (09:19 +0200)]
qxl: hook monitors_config updates into crtc, not encoder.
The encoder callbacks are only called in case the video mode changes.
So any layout changes without mode changes will go unnoticed.
Add qxl_crtc_update_monitors_config(), based on the old
qxl_write_monitors_config_for_encoder() function. Hook it into the
enable, disable and flush atomic crtc callbacks. Remove monitors_config
updates from all other places.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=
1544322
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180420071904.24276-4-kraxel@redhat.com
Gerd Hoffmann [Fri, 20 Apr 2018 07:19:02 +0000 (09:19 +0200)]
qxl: move qxl_send_monitors_config()
Needed to avoid a forward declaration in a followup patch.
Pure code move, no functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180420071904.24276-3-kraxel@redhat.com
Gerd Hoffmann [Fri, 20 Apr 2018 07:19:01 +0000 (09:19 +0200)]
qxl: remove qxl_io_log()
qxl_io_log() sends messages over to the host (qemu) for logging.
Remove the function and all callers, we can just use standard
DRM_DEBUG calls (and if needed a serial console).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180420071904.24276-2-kraxel@redhat.com
Philippe CORNU [Thu, 25 Jan 2018 15:55:04 +0000 (16:55 +0100)]
drm/bridge/synopsys: dsi: use adjusted_mode in mode_set
The "adjusted_mode" clock value (ie the real pixel clock) is more
accurate than "mode" clock value (ie the panel/bridge requested
clock value). It offers a better preciseness for timing
computations and allows to reduce the extra dsi bandwidth in
burst mode (from ~20% to ~10-12%, hw platform dependent).
Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Yannick Fertré <yannick.fertre@st.com>
Tested-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180125155504.8611-1-philippe.cornu@st.com
Daniel Vetter [Wed, 25 Apr 2018 11:17:42 +0000 (13:17 +0200)]
drm/todo: Fallout from v3d review
Bunch of ideas from Eric and me on what we could do to make gem gpu
rendering drivers a notch simpler to type.
v2: Fix typo (Eric).
Cc: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180425111742.5872-1-daniel.vetter@ffwll.ch
Luc Van Oostenryck [Tue, 24 Apr 2018 13:15:24 +0000 (15:15 +0200)]
drm/virtio: fix mode_valid's return type
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131524.2510-1-luc.vanoostenryck@gmail.com
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131515.2360-1-luc.vanoostenryck@gmail.com
Cc: David Airlie <airlied@linux.ie>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Luc Van Oostenryck [Tue, 24 Apr 2018 13:15:21 +0000 (15:15 +0200)]
drm/i2c: tda998x: fix mode_valid's return type
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131522.2460-1-luc.vanoostenryck@gmail.com
Luc Van Oostenryck [Tue, 24 Apr 2018 13:15:15 +0000 (15:15 +0200)]
drm/qxl: fix mode_valid's return type
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131515.2360-1-luc.vanoostenryck@gmail.com
Luc Van Oostenryck [Tue, 24 Apr 2018 13:14:57 +0000 (15:14 +0200)]
drm/gma500: fix psb_intel_lvds_mode_valid()'s return type
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method, psb_intel_lvds_mode_valid(), uses an 'int' for it.
Fix this by using 'enum drm_mode_status' for psb_intel_lvds_mode_valid().
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131458.2060-1-luc.vanoostenryck@gmail.com
Luc Van Oostenryck [Tue, 24 Apr 2018 13:14:54 +0000 (15:14 +0200)]
drm/gma500: fix mode_valid's return type
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131455.2011-1-luc.vanoostenryck@gmail.com
Luc Van Oostenryck [Tue, 24 Apr 2018 13:14:52 +0000 (15:14 +0200)]
drm/bridge: tc358767: fix mode_valid's return type
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131453.1961-1-luc.vanoostenryck@gmail.com
Luc Van Oostenryck [Tue, 24 Apr 2018 13:14:45 +0000 (15:14 +0200)]
drm/bochs: fix mode_valid's return type
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131445.1861-1-luc.vanoostenryck@gmail.com
Luc Van Oostenryck [Tue, 24 Apr 2018 13:15:17 +0000 (15:15 +0200)]
drm/udl: fix mode_valid's return type
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131520.2409-1-luc.vanoostenryck@gmail.com
Luc Van Oostenryck [Tue, 24 Apr 2018 13:15:06 +0000 (15:15 +0200)]
drm/mgag200: fix mode_valid's return type
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131508.2210-1-luc.vanoostenryck@gmail.com
Luc Van Oostenryck [Tue, 24 Apr 2018 13:15:02 +0000 (15:15 +0200)]
drm/hisilicon: fix mode_valid's return type
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131504.2159-1-luc.vanoostenryck@gmail.com
Luc Van Oostenryck [Tue, 24 Apr 2018 13:14:47 +0000 (15:14 +0200)]
drm/bridge: adv7511: fix mode_valid's return type
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131450.1910-1-luc.vanoostenryck@gmail.com
Luc Van Oostenryck [Tue, 24 Apr 2018 13:14:40 +0000 (15:14 +0200)]
drm/ast: fix mode_valid's return type
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131443.1810-1-luc.vanoostenryck@gmail.com
Kieran Bingham [Tue, 13 Feb 2018 17:48:57 +0000 (17:48 +0000)]
drm: adv7511: Add support for i2c_new_secondary_device
The ADV7511 has four 256-byte maps that can be accessed via the main I2C
ports. Each map has it own I2C address and acts as a standard slave
device on the I2C bus.
Allow a device tree node to override the default addresses so that
address conflicts with other devices on the same bus may be resolved at
the board description level.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1518544137-2742-6-git-send-email-kbingham@kernel.org
Kieran Bingham [Tue, 13 Feb 2018 17:48:54 +0000 (17:48 +0000)]
dt-bindings: adv7511: Extend bindings to allow specifying slave map addresses
The ADV7511 has four 256-byte maps that can be accessed via the main I2C
ports. Each map has it own I2C address and acts as a standard slave
device on the I2C bus.
Extend the device tree node bindings to be able to override the default
addresses so that address conflicts with other devices on the same bus
may be resolved at the board description level.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1518544137-2742-3-git-send-email-kbingham@kernel.org
Daniel Vetter [Tue, 24 Apr 2018 14:22:42 +0000 (16:22 +0200)]
drm: Don't EXPORT drm_add/reset_display_info
Only used within drm.ko, no need to tempt drivers.
Cc: Keith Packard <keithp@keithp.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424142242.12093-1-daniel.vetter@ffwll.ch
Daniel Vetter [Mon, 9 Apr 2018 08:51:34 +0000 (10:51 +0200)]
drm/xen-front: use simple display pipe prepare_fb helper
I missed this one because on an older tree.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: xen-devel@lists.xen.org
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180409085134.27321-1-daniel.vetter@ffwll.ch
Daniel Vetter [Thu, 5 Apr 2018 15:44:46 +0000 (17:44 +0200)]
drm/atomic: better doc for implicit vs explicit fencing
Note that a pile of drivers don't seem to take implicit fencing into
account, or at least don't call drm_atoimc_set_fence_for_plane().
Cc'ing relevant people, or at least some. Some drivers also look like
they don't disable implicit fencing (e.g. amdgpu) because the explicit
fences and implicit fences are handled by entirely independent code
paths.
I also wonder whether we shouldn't just make the recommended helpers
the default ones, since a lot of drivers don't bother to handle the
implicit fences at all it seems. The helpers won't blow up even for
non-GEM drivers or GEM drivers which don't fill out the gem bo
pointers in struct drm_framebuffer.
v2: Comments from Eric.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-7-daniel.vetter@ffwll.ch
Daniel Vetter [Thu, 5 Apr 2018 15:44:45 +0000 (17:44 +0200)]
drm/mxsfb: Use simple_display_pipe prepare_fb helper
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Marek Vasut <marex@denx.de>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-6-daniel.vetter@ffwll.ch
Daniel Vetter [Thu, 5 Apr 2018 15:44:44 +0000 (17:44 +0200)]
drm/pl111: Use simple_display_pipe prepare_fb helper
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-5-daniel.vetter@ffwll.ch
Daniel Vetter [Thu, 5 Apr 2018 15:44:43 +0000 (17:44 +0200)]
drm/tve200: Use simple_display_pipe prepare_fb helper
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-4-daniel.vetter@ffwll.ch
Daniel Vetter [Thu, 5 Apr 2018 15:44:42 +0000 (17:44 +0200)]
drm: Move simple_display_pipe prepare_fb helper into gem fb helpers
There's nothing tinydrm specific to this, and there's a few more
copies of the same in various other drivers.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: David Lechner <david@lechnology.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: David Lechner <david@lechnology.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-3-daniel.vetter@ffwll.ch
Daniel Vetter [Thu, 5 Apr 2018 15:44:41 +0000 (17:44 +0200)]
drm/vmwgfx: Remove no-op prepare/cleanup_fb callbacks
Less hits to go through when I git grep over all drivers. These
callbacks are optional.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-2-daniel.vetter@ffwll.ch
Hans de Goede [Wed, 18 Apr 2018 12:36:42 +0000 (14:36 +0200)]
drm: panel-orientation-quirks: Add quirk for Lenovo Ideapad Mixx 320
The Lenovo Ideapad Mixx 320 laptop uses a portrait LCD panel, add a
quirk for this.
While at it instead of duplicating the same drm_dmi_panel_orientation_data
for 3 laptops add a generic lcd800x1280_rightside_up orientation_data and
use that for all 3 (including the new Mixx 320 entry).
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180418123642.11088-2-hdegoede@redhat.com
Hans de Goede [Wed, 18 Apr 2018 12:36:41 +0000 (14:36 +0200)]
drm: panel-orientation-quirks: Add quirk for Lenovo Ideapad Mixx 310
Some production batches of the Lenovo Ideapad Mixx 310 laptop use
a portrait LCD panel, add a quirk for this.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180418123642.11088-1-hdegoede@redhat.com
Tomasz Figa [Mon, 23 Apr 2018 10:50:03 +0000 (12:50 +0200)]
drm/rockchip: psr: Remove flush by CRTC
It is not used anymore after last changes and it was not even correct to
begin with as it assumed a 1:1 relation between a CRTC and encoder,
while in fact a CRTC can be attached to multiple encoders.
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-28-enric.balletbo@collabora.com
Tomasz Figa [Mon, 23 Apr 2018 10:50:02 +0000 (12:50 +0200)]
drm/rockchip: Disallow PSR for the whole atomic commit
Currently PSR flush is triggered from CRTC's .atomic_begin() callback,
which is executed after modeset disables and enables and before plane
updates are committed. Since PSR flush and re-enable can be triggered
asynchronously by external sources (input event, delayed work), it can
race with hardware programming done in the aforementioned stages.
This patch blocks the PSR completely before hardware programming part
begins and unblock after it ends. This relies on reference counted PSR
disable introduced with previous patch.
Cc: Kristian H. Kristensen <hoegsberg@chromium.org>
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-27-enric.balletbo@collabora.com
Tomasz Figa [Mon, 23 Apr 2018 10:50:01 +0000 (12:50 +0200)]
drm/rockchip: psr: Sanitize semantics of allow/inhibit API
Currently both rockchip_drm_psr_activate() and _deactivate() only set the
boolean "active" flag without actually making sure that hardware state
complies with it.
Since we are going to extend the usage of this API to properly lock PSR
for the duration of atomic commits, we change the semantics in following
way:
- a counter is used to track the number of inhibit requests,
- PSR is actually disabled in hardware on first inhibit request,
- PSR enable work is scheduled on last allow request.
The above allows using the API as a way to deterministically synchronize
PSR state changes with other DRM events, i.e. atomic commits and cursor
updates. As a nice side effect, the naming is sorted out and we have
"inhibit" for stopping the software logic and "enable" for hardware
state.
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-26-enric.balletbo@collabora.com
Tomasz Figa [Mon, 23 Apr 2018 10:50:00 +0000 (12:50 +0200)]
drm/rockchip: psr: Avoid redundant calls to .set() callback
The first time after we call rockchip_drm_do_flush() after
rockchip_drm_psr_register(), we go from PSR_DISABLE to PSR_FLUSH. The
difference between PSR_DISABLE and PSR_FLUSH is whether or not we have a
delayed work pending - PSR is off in either state. However
psr_set_state() only catches the transition from PSR_FLUSH to
PSR_DISABLE (which never happens), while going from PSR_DISABLE to
PSR_FLUSH triggers a call to psr->set() to disable PSR while it's
already disabled. This triggers the eDP PHY power-on sequence without
being shut down first and this seems to occasionally leave the encoder
unable to later enable PSR. Let's just simplify the state machine and
simply consider PSR_DISABLE and PSR_FLUSH the same state.
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-25-enric.balletbo@collabora.com
Tomasz Figa [Mon, 23 Apr 2018 10:49:59 +0000 (12:49 +0200)]
drm/rockchip: analogix_dp: Do not call Analogix code before bind
Driver callbacks, such as system suspend or resume can be called any
time, specifically they can be called before the component bind
callback. Let's use dp->adp pointer as a safeguard and skip calling
Analogix entry points if it is an ERR_PTR().
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-24-enric.balletbo@collabora.com
Douglas Anderson [Mon, 23 Apr 2018 10:49:58 +0000 (12:49 +0200)]
drm/bridge: analogix_dp: Split the platform-specific poweron in two parts
Some of the platform-specific stuff in rockchip_dp_poweron() needs to
happen before the generic code. Some needs to happen after. Let's
split the callback in two.
Specifically we can't start doing PSR work until _after_ the whole
controller is up, so don't set the enable until the end.
Cc: Kristian H. Kristensen <hoegsberg@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
[seanpaul added exynos change]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-23-enric.balletbo@collabora.com
Mark Yao [Mon, 23 Apr 2018 10:49:57 +0000 (12:49 +0200)]
drm/rockchip: pre dither down when output bpc is 8bit
Some encoder have a crc verification check, crc check fail if
input and output data is not equal.
That means encoder input and output need use same color depth,
vop can output 10bit data to encoder, but some panel only support
8bit depth, that would make crc check die.
So pre dither down vop data to 8bit if panel's bpc is 8.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
[seanpaul resolved conflict in rockchip_drm_vop.c]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-22-enric.balletbo@collabora.com
Douglas Anderson [Mon, 23 Apr 2018 10:49:56 +0000 (12:49 +0200)]
drm/bridge: analogix_dp: Properly disable aux chan retries on rockchip
The comments in analogix_dp_init_aux() claim that we're disabling aux
channel retries, but then right below it for Rockchip it sets them to
3. If we actually need 3 retries for Rockchip then we could adjust
the comment, but it seems more likely that we want the same retry
behavior across all platforms.
Cc: Stéphane Marchesin <marcheu@chromium.org>
Cc: 征增 王 <wzz@rock-chips.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-21-enric.balletbo@collabora.com
Douglas Anderson [Mon, 23 Apr 2018 10:49:55 +0000 (12:49 +0200)]
drm/bridge: analogix_dp: Properly log AUX CH errors
The code in analogix_dp_transfer() that was supposed to print out:
AUX CH error happened
Was actually dead code. That's because the previous check (whether
the interrupt status indicated any errors) would have hit for all
errors anyway.
Let's combine the two error checks so we can actually see AUX CH
errors. We'll also downgrade the message to a warning since some of
these types of errors might be expected for some displays. If this
gets too noisy we can downgrade again to debug.
Cc: 征增 王 <wzz@rock-chips.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-20-enric.balletbo@collabora.com
Douglas Anderson [Mon, 23 Apr 2018 10:49:54 +0000 (12:49 +0200)]
drm/bridge: analogix_dp: Reorder plat_data->power_off to happen sooner
The current user of the analogix power_off is "analogix_dp-rockchip".
That driver does this:
- deactivate PSR
- turn off a clock
Both of these things (especially deactive PSR) should be done before
we turn the PHY power off and turn off analog power. Let's move the
callback up.
Note that without this patch (and with
https://patchwork.kernel.org/patch/
9553349/ [seanpaul: this patch was
not applied, but it seems like the race can still occur]), I experienced
an error in reboot testing where one thread was at:
rockchip_drm_psr_deactivate
rockchip_dp_powerdown
analogix_dp_bridge_disable
drm_bridge_disable
...and the other thread was at:
analogix_dp_send_psr_spd
analogix_dp_enable_psr
analogix_dp_psr_set
psr_flush_handler
The flush handler thread was finding AUX channel errors and eventually
reported "Failed to apply PSR", where I had a kgdb breakpoint. Presumably
the device would have eventually given up and shut down anyway, but it
seems better to fix the order to be more correct.
Cc: Kristian H. Kristensen <hoegsberg@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-19-enric.balletbo@collabora.com
zain wang [Mon, 23 Apr 2018 10:49:53 +0000 (12:49 +0200)]
drm/bridge: analogix_dp: Move fast link training detect to set_bridge
It's too early to detect fast link training, if other step after it
failed, we will set fast_link flag to 1, and retry set_bridge again. In
this case we will power down and power up panel power supply, and we
will do fast link training since we have set fast_link flag to 1. In
fact, we should do full link training now, not the fast link training.
So we should move the fast link detection at the end of set_bridge.
Cc: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-18-enric.balletbo@collabora.com
zain wang [Mon, 23 Apr 2018 10:49:52 +0000 (12:49 +0200)]
drm/bridge: analogix_dp: Fix incorrect operations with register ANALOGIX_DP_FUNC_EN_1
Register ANALOGIX_DP_FUNC_EN_1(offset 0x18), Rockchip is different to
Exynos:
on Exynos edp phy,
BIT 7 MASTER_VID_FUNC_EN_N
BIT 6 reserved
BIT 5 SLAVE_VID_FUNC_EN_N
on Rockchip edp phy,
BIT 7 reserved
BIT 6 RK_VID_CAP_FUNC_EN_N
BIT 5 RK_VID_FIFO_FUNC_EN_N
So, we should do some private operations to Rockchip.
Cc: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-17-enric.balletbo@collabora.com
zain wang [Mon, 23 Apr 2018 10:49:51 +0000 (12:49 +0200)]
drm/bridge: analogix_dp: Fix timeout of video streamclk config
The STRM_VALID bit in register ANALOGIX_DP_SYS_CTL_3 may be unstable,
so we may hit the error log "Timeout of video streamclk ok" since
checked this unstable bit.
In fact, we can go continue and the streamclk is ok if we wait enough time,
it does no effect on display.
Let's change this error to warn.
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-16-enric.balletbo@collabora.com
zain wang [Mon, 23 Apr 2018 10:49:50 +0000 (12:49 +0200)]
drm/bridge: analogix_dp: Don't use ANALOGIX_DP_PLL_CTL to control pll
There is no register named ANALOGIX_DP_PLL_CTL in Rockchip edp phy reg
list. We should use BIT_4 in ANALOGIX_DP_PD to control the pll power
instead of ANALOGIX_DP_PLL_CTL.
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-15-enric.balletbo@collabora.com
zain wang [Mon, 23 Apr 2018 10:49:49 +0000 (12:49 +0200)]
drm/rockchip: Restore psr->state when enable/disable psr failed
If we failed disable psr, it would hang the display until next psr
cycle coming. So we should restore psr->state when it failed.
Cc: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-14-enric.balletbo@collabora.com
Lin Huang [Mon, 23 Apr 2018 10:49:48 +0000 (12:49 +0200)]
drm/bridge: analogix_dp: Reset aux channel if an error occurred
AUX errors are caused by many different reasons. We may not know what
happened in aux channel on failure, so let's reset aux channel if some
errors occurred.
Cc: 征增 王 <wzz@rock-chips.com>
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-13-enric.balletbo@collabora.com
zain wang [Mon, 23 Apr 2018 10:49:47 +0000 (12:49 +0200)]
drm/bridge: analogix_dp: Fix AUX_PD bit for Rockchip
There are some different bits between Rockchip and Exynos in register
"AUX_PD". This patch fixes the incorrect operations about it.
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-12-enric.balletbo@collabora.com
Lin Huang [Mon, 23 Apr 2018 10:49:46 +0000 (12:49 +0200)]
drm/bridge: analogix_dp: Check dpcd write/read status
We need to check the dpcd write/read return value to see whether the
write/read was successful
Cc: Kristian H. Kristensen <hoegsberg@chromium.org>
Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-11-enric.balletbo@collabora.com
zain wang [Mon, 23 Apr 2018 10:49:45 +0000 (12:49 +0200)]
drm/bridge: analogix_dp: Fix incorrect usage of enhanced mode
Enhanced mode is required by the eDP 1.2 specification, and not doing it
early could result in a period of time where we have a link transmitting
idle packets without it. Since there is no reason to disable it, we just
enable it at the beginning of link training and then keep it on all the
time.
Cc: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-10-enric.balletbo@collabora.com
Lin Huang [Mon, 23 Apr 2018 10:49:44 +0000 (12:49 +0200)]
drm/bridge: analogix_dp: Extend hpd check time to 100ms
There was a 1ms delay to detect the hpd signal, which is too short to
detect a short pulse. This patch extends this delay to 100ms.
Cc: Stéphane Marchesin <marcheu@chromium.org>
Cc: 征增 王 <wzz@rock-chips.com>
Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-9-enric.balletbo@collabora.com
Lin Huang [Mon, 23 Apr 2018 10:49:43 +0000 (12:49 +0200)]
drm/bridge: analogix_dp: Ensure edp is disabled when shutting down the panel
When panel is shut down, we should make sure edp can be disabled to avoid
undefined behavior.
Cc: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-8-enric.balletbo@collabora.com
zain wang [Mon, 23 Apr 2018 10:49:42 +0000 (12:49 +0200)]
drm/bridge: analogix_dp: Set PD_INC_BG first when powering up edp phy
Following the correct power up sequence:
dp_pd=ff => dp_pd=7f => wait 10us => dp_pd=00
Cc: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-7-enric.balletbo@collabora.com
zain wang [Mon, 23 Apr 2018 10:49:41 +0000 (12:49 +0200)]
drm/bridge: analogix_dp: Wait for HPD signal before configuring link
According to DP spec v1.3 chap 3.5.1.2 Link Training, Link Policy Maker
must first detect that the HPD signal is asserted high by the Downstream
Device before establishing a link with it.
Cc: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-6-enric.balletbo@collabora.com
zain wang [Mon, 23 Apr 2018 10:49:40 +0000 (12:49 +0200)]
drm/bridge: analogix_dp: Retry bridge enable when it failed
When we enable bridge failed, we have to retry it, otherwise we would get
the abnormal display.
Cc: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-5-enric.balletbo@collabora.com
zain wang [Mon, 23 Apr 2018 10:49:39 +0000 (12:49 +0200)]
drm/bridge: analogix_dp: Don't use fast link training when panel just powered up
Panel would reset its setting when it powers down. It would forget the last
succeeded link training setting. So we can't use the last successful link
training setting to do fast link training. Let's reset fast_train_enable in
analogix_dp_bridge_disable();
Cc: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-4-enric.balletbo@collabora.com
Lin Huang [Mon, 23 Apr 2018 10:49:38 +0000 (12:49 +0200)]
drm/bridge: analogix_dp: Check AUX_EN status when doing AUX transfer
We should check AUX_EN bit to confirm the AUX CH operation is completed.
Cc: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-3-enric.balletbo@collabora.com
Lin Huang [Mon, 23 Apr 2018 10:49:37 +0000 (12:49 +0200)]
drm/bridge: analogix_dp: Move enable video into config_video()
We need to enable video before analogix_dp_is_video_stream_on(), so
we can get the right video stream status.
We needed to increase the delay in the timeout loop because there is
random "Timeout of video streamclk ok" message happen when debug edp
panel, this time do not define in the spec.
Cc: 征增 王 <wzz@rock-chips.com>
Cc: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-2-enric.balletbo@collabora.com
Stefan Schake [Fri, 20 Apr 2018 12:25:45 +0000 (05:25 -0700)]
drm/vc4: Add CTM registers to debugfs
Now that we set the OLED* registers to do CTM, it's helpful to have them
in the register dump.
Signed-off-by: Stefan Schake <stschake@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180420122545.40014-2-stschake@gmail.com
Stefan Schake [Fri, 20 Apr 2018 12:25:44 +0000 (05:25 -0700)]
drm/vc4: Add CTM support
The hardware has a single block for applying a CTM prior to gamma lut.
It can be fed with pixels from one of our CRTC at a time and uses a
matrix with S0.9 scalars. Use private atomic state to reject attempts
from userland to apply CTM for more than one CRTC at a time and reject
matrices with scalars that we can't approximate without integer bits.
Signed-off-by: Stefan Schake <stschake@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/218067/
Stefan Schake [Sat, 21 Apr 2018 00:09:54 +0000 (17:09 -0700)]
drm/vc4: Add support for plane alpha
The HVS supports mixing fixed alpha with per-pixel alpha or
setting a fixed plane alpha in case there is no per-pixel information.
This allows us to support the generic DRM plane alpha property.
Signed-off-by: Stefan Schake <stschake@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180421000954.18936-1-stschake@gmail.com
Wolfram Sang [Thu, 19 Apr 2018 14:05:46 +0000 (16:05 +0200)]
gpu: drm: vc4: simplify getting .drvdata
We should get drvdata from struct device directly. Going via
platform_device is an unneeded step back and forth.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180419140641.27926-17-wsa+renesas@sang-engineering.com
Boris Brezillon [Sat, 21 Apr 2018 07:08:46 +0000 (09:08 +0200)]
dt-bindings: drm/bridge: Document Cadence DSI bridge bindings
Document the bindings used for the Cadence DSI bridge.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180421070846.10330-2-boris.brezillon@bootlin.com
Boris Brezillon [Sat, 21 Apr 2018 07:08:45 +0000 (09:08 +0200)]
drm/bridge: Add Cadence DSI driver
Add a driver for Cadence DPI -> DSI bridge.
This driver only support a subset of Cadence DSI bridge capabilities.
This driver has been tested/debugged in a simulated environment which
explains why some of the features are missing. Here is a
non-exhaustive list of missing features:
* burst mode
* DPHY init/configuration steps
* support for additional input interfaces (SDI input)
DSI commands and non-burst video mode have been tested.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180421070846.10330-1-boris.brezillon@bootlin.com
Fabio Estevam [Thu, 15 Mar 2018 18:04:17 +0000 (15:04 -0300)]
drm: dw-hdmi-i2s: Remove owner assignment from platform_driver
platform_driver does not need to set the owner field, as this will
be populated by the driver core.
Generated by scripts/coccinelle/api/platform_no_drv_owner.cocci.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1521137057-14773-1-git-send-email-festevam@gmail.com
Jacopo Mondi [Wed, 18 Apr 2018 14:40:29 +0000 (16:40 +0200)]
drm: bridge: Add thc63lvd1024 LVDS decoder driver
Add DRM bridge driver for Thine THC63LVD1024 LVDS to digital parallel
output converter.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1524062429-325-3-git-send-email-jacopo+renesas@jmondi.org
Jacopo Mondi [Wed, 18 Apr 2018 14:40:28 +0000 (16:40 +0200)]
dt-bindings: display: bridge: Document THC63LVD1024 LVDS decoder
Document Thine THC63LVD1024 LVDS decoder device tree bindings.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1524062429-325-2-git-send-email-jacopo+renesas@jmondi.org
Link: https://patchwork.freedesktop.org/patch/msgid/1524062429-325-2-git-send-email-jacopo+renesas@jmondi.org
Philippe CORNU [Thu, 8 Feb 2018 14:58:05 +0000 (15:58 +0100)]
drm/bridge/synopsys: dsi: Adopt SPDX identifiers
Add SPDX identifiers to the Synopsys DesignWare MIPI DSI
host controller driver.
Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Acked-by: Philippe Ombredanne <pombredanne@nexB.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180208145805.24762-1-philippe.cornu@st.com
Philippe CORNU [Tue, 10 Apr 2018 13:53:12 +0000 (15:53 +0200)]
drm/stm: ltdc: fix warning in ltdc_crtc_update_clut()
Fix the warning
"warn: variable dereferenced before check 'crtc' (see line 390)"
by removing unnecessary checks as ltdc_crtc_update_clut() is
only called from ltdc_crtc_atomic_flush() where crtc and
crtc->state are not NULL.
Many thanks to Dan Carpenter for the bug report
https://lists.freedesktop.org/archives/dri-devel/2018-February/166918.html
Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: yannick fertre <yannick.fertre@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180410135312.3553-1-philippe.cornu@st.com
Philippe CORNU [Sat, 7 Apr 2018 21:35:03 +0000 (23:35 +0200)]
drm/stm: ltdc: add user update info in plane print state
This patch adds the user update information in
frames-per-second into the drm debugfs plane state.
Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180407213503.30932-1-philippe.cornu@st.com
Philippe CORNU [Sat, 7 Apr 2018 21:29:37 +0000 (23:29 +0200)]
drm/stm: move enable/disable_vblank to crtc
enable/disable_vblank() functions at drm_driver level
are deprecated. Move them to the ltdc drm_crtc_funcs
structure.
Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180407212937.30407-1-philippe.cornu@st.com
Oleksandr Andrushchenko [Tue, 17 Apr 2018 07:40:12 +0000 (10:40 +0300)]
drm/xen-front: Remove CMA support
It turns out this was only needed to paper over a bug in the CMA
helpers, which was addressed in
commit
998fb1a0f478b83492220ff79583bf9ad538bdd8
Author: Liviu Dudau <Liviu.Dudau@arm.com>
Date: Fri Nov 10 13:33:10 2017 +0000
drm: gem_cma_helper.c: Allow importing of contiguous scatterlists with nents > 1
Without this the following pipeline didn't work:
domU:
1. xen-front allocates a non-contig buffer
2. creates grants out of it
dom0:
3. converts the grants into a dma-buf. Since they're non-contig, the
scatter-list is huge.
4. imports it into rcar-du, which requires dma-contig memory for
scanout.
-> On this given platform there's an IOMMU, so in theory this should
work. But in practice this failed, because of the huge number of sg
entries, even though the IOMMU driver mapped it all into a dma-contig
range.
With a guest-contig buffer allocated in step 1, this problem doesn't
exist. But there's technically no reason to require guest-contig
memory for xen buffer sharing using grants.
Given all that, the xen-front cma support is not needed and should be
removed.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180417074012.21311-1-andr2000@gmail.com
Boris Brezillon [Fri, 30 Mar 2018 14:55:18 +0000 (16:55 +0200)]
drm/atomic: Add sanity checks to drm_atomic_helper_async_commit()
->atomic_async_update() requires that drivers update the plane->state
object before returning. Make sure at least common properties have been
updated.
Cc: Gustavo Padovan <gustavo@padovan.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Acked-by: Eric Anholt <eric@anholt.net>
Acked-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180330145518.29770-1-boris.brezillon@bootlin.com
Gustavo Padovan [Fri, 30 Mar 2018 08:54:45 +0000 (10:54 +0200)]
drm/vc4: update cursors asynchronously through atomic
Add support for async updates of cursors by using the new atomic
interface for that. Basically what this commit does is do what
vc4_update_plane() did but through atomic.
v7: Place the drm_atomic_set_fb_for_plane() call after the new
FB has been applied to the HW to avoid possible use-after-free
issues
v6: add missing drm_atomic_set_fb_for_plane() in
vc4_plane_atomic_async_update() (Boris Brezillon)
v5: add missing call to vc4_plane_atomic_check() (Eric Anholt)
v4: add drm_atomic_helper_async() commit (Eric Anholt)
v3: move size checks back to drivers (Ville Syrjälä)
v2: move fb setting to core and use new state (Eric Anholt)
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180330085445.31726-1-boris.brezillon@bootlin.com
Stefan Schake [Wed, 11 Apr 2018 20:49:14 +0000 (22:49 +0200)]
drm/vc4: Move CRTC state to header
We need to access the channel for configuring our CTM hardware.
Signed-off-by: Stefan Schake <stschake@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1523479755-20812-4-git-send-email-stschake@gmail.com
Stefan Schake [Wed, 11 Apr 2018 20:49:13 +0000 (22:49 +0200)]
drm/vc4: Expose gamma as atomic property
We are an atomic driver so the gamma LUT should also be exposed as a
CRTC property through the DRM atomic color management. This will also
take care of the legacy path for us.
Signed-off-by: Stefan Schake <stschake@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1523479755-20812-3-git-send-email-stschake@gmail.com
Eric Anholt [Wed, 11 Apr 2018 20:49:12 +0000 (22:49 +0200)]
drm/vc4: Add some missing HVS register definitions.
At least the RGBA expand field we should have been setting, because we
aren't expanding correctly for 565 -> 8888. Other registers are ones
that may be interesting for various projects that have been discussed.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stefan Schake <stschake@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523479755-20812-2-git-send-email-stschake@gmail.com
John Keeping [Wed, 28 Mar 2018 16:03:51 +0000 (17:03 +0100)]
drm/rockchip: fix VOP vblank race
We have seen a case of a bad reference count for vblanks with the
Rockchip VOP:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 383 at drivers/gpu/drm/drm_irq.c:1198 drm_vblank_put+0x40/0xcc
Modules linked in: brcmfmac brcmutil
CPU: 1 PID: 383 Comm: kworker/u8:2 Not tainted 4.9.75-rt60 #1
Hardware name: Rockchip (Device Tree)
Workqueue: events_unbound flip_worker
Backtrace:
[<
c010b7b0>] (dump_backtrace) from [<
c010ba4c>] (show_stack+0x18/0x1c)
r7:
c0b1b13c r6:
600b0013 r5:
00000000 r4:
c0b1b13c
[<
c010ba34>] (show_stack) from [<
c032d248>] (dump_stack+0x78/0x94)
[<
c032d1d0>] (dump_stack) from [<
c011e6e8>] (__warn+0xe4/0x104)
r7:
00000009 r6:
c03cf26c r5:
00000000 r4:
00000000
[<
c011e604>] (__warn) from [<
c011e7c0>] (warn_slowpath_null+0x28/0x30)
r9:
eeb443a0 r8:
eeb443c8 r7:
ee8a5ec0 r6:
ee8a5ec0 r5:
edb47f00 r4:
ee096200
[<
c011e798>] (warn_slowpath_null) from [<
c03cf26c>] (drm_vblank_put+0x40/0xcc)
[<
c03cf22c>] (drm_vblank_put) from [<
c03cf310>] (drm_crtc_vblank_put+0x18/0x1c)
r5:
edb47f00 r4:
ee3c8a80
[<
c03cf2f8>] (drm_crtc_vblank_put) from [<
c03ef9b4>] (vop_fb_unref_worker+0x18/0x24)
[<
c03ef99c>] (vop_fb_unref_worker) from [<
c03df194>] (flip_worker+0x98/0xb4)
r5:
edb47f00 r4:
eeb443a8
[<
c03df0fc>] (flip_worker) from [<
c0134808>] (process_one_work+0x1a8/0x2fc)
r9:
00000000 r8:
ee807d00 r7:
00000000 r6:
ee809c00 r5:
eeb443a8 r4:
edfe5f80
[<
c0134660>] (process_one_work) from [<
c01358ec>] (worker_thread+0x2ac/0x458)
r10:
00000088 r9:
edfe5f98 r8:
ee809c2c r7:
c0b04100 r6:
ee809c00 r5:
ee809c00
r4:
edfe5f80
[<
c0135640>] (worker_thread) from [<
c013a0bc>] (kthread+0xfc/0x10c)
r10:
00000000 r9:
00000000 r8:
c0135640 r7:
edfe5f80 r6:
00000000 r5:
edf0e240
r4:
ee8a4000 r3:
ed194e00
[<
c0139fc0>] (kthread) from [<
c0107cb8>] (ret_from_fork+0x14/0x3c)
r8:
00000000 r7:
00000000 r6:
00000000 r5:
c0139fc0 r4:
edf0e240
---[ end trace
0000000000000002 ]---
It seems that this is caused by unfortunate timing between
vop_crtc_atomic_flush() and vop_handle_vblank() given the following
ordering:
atomic_flush handle_vblank
------------ -------------
drm_flip_work_queue
set_bit
if (test_and_clear_bit(...))
drm_flip_work_commit
drm_vblank_get
This results in vop_fb_unref_worker (called as flip work) decrementing
the vblank refcount before it has been incremented.
Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Sandy huang <hjc@rock-chips.com>
Signed-off-by: Sandy Huang <hjc@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328160351.23763-1-john@metanate.com
Maxime Ripard [Wed, 11 Apr 2018 07:39:29 +0000 (09:39 +0200)]
drm/docs: Remove the rcar alpha from the csv file
Now that we moved the rcar-du DRM driver has been switched to the generic
alpha property, remove the former property documentation from the
deprecated CSV file.
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/04be5e2256aa8d33d9521a68a10f0b73a24f8040.1523432341.git-series.maxime.ripard@bootlin.com
Maxime Ripard [Wed, 11 Apr 2018 07:39:28 +0000 (09:39 +0200)]
drm/sun4i: Add support for plane alpha
Our backend supports a per-plane alpha property. Support it through our new
helper.
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/13e89f0d2f2b55752a22eb8c4f37f325246a3a9c.1523432341.git-series.maxime.ripard@bootlin.com
Maxime Ripard [Wed, 11 Apr 2018 07:39:27 +0000 (09:39 +0200)]
drm/rcar-du: Convert to the new generic alpha property
Now that we have support for per-plane alpha in the core, let's use it.
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a343697b87109cd8d9675ea8bce2e561051a696f.1523432341.git-series.maxime.ripard@bootlin.com
Maxime Ripard [Wed, 11 Apr 2018 07:39:26 +0000 (09:39 +0200)]
drm/atmel-hclcdc: Convert to the new generic alpha property
Now that we have support for per-plane alpha in the core, let's use it.
Acked-by: Boris Brezillon <boris.brezillon@bootlin.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e5e97e2aae129600233e0983b748e4ba51ced239.1523432341.git-series.maxime.ripard@bootlin.com
Maxime Ripard [Wed, 11 Apr 2018 07:39:25 +0000 (09:39 +0200)]
drm/blend: Add a generic alpha property
Some drivers duplicate the logic to create a property to store a per-plane
alpha.
This is especially useful if we ever want to support extra protocols for
Wayland like:
https://lists.freedesktop.org/archives/wayland-devel/2017-August/034741.html
Let's create a helper in order to move that to the core.
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6e1ce0db78fcfc407e94913c64819e65109d034d.1523432341.git-series.maxime.ripard@bootlin.com
Maxime Ripard [Wed, 4 Apr 2018 09:57:12 +0000 (11:57 +0200)]
drm/sun4i: Tie the DSI controller in the TCON
The DSI controller needs a particular interface (CPU aka 8080) with some
modifications from the TCON in order to run.
Make sure the TCON is able to provide it when we are using the DSI output.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/129f5928113d2ca865bf5269047c2e4ba6fed5e6.1522835818.git-series.maxime.ripard@bootlin.com
Maxime Ripard [Wed, 4 Apr 2018 09:57:11 +0000 (11:57 +0200)]
drm/sun4i: Add Allwinner A31 MIPI-DSI controller support
Most of the Allwinner SoCs since the A31 share the same MIPI-DSI
controller.
While that controller is mostly undocumented, the code is out there and has
been cleaned up in order to be integrated into DRM. However, there's still
some dark areas that are a bit unclear about how the block exactly
operates.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ad9e6224fced87c0889ddd2765d1942610061f72.1522835818.git-series.maxime.ripard@bootlin.com
Maxime Ripard [Wed, 4 Apr 2018 09:57:10 +0000 (11:57 +0200)]
dt-bindings: display: Add Allwinner MIPI-DSI bindings
The Allwinner SoCs usually come with a DSI encoder. Add a binding for it.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cdc5402570199f5c08211f29d9182ea5948d3c40.1522835818.git-series.maxime.ripard@bootlin.com
Maxime Ripard [Wed, 4 Apr 2018 09:57:09 +0000 (11:57 +0200)]
drm/sun4i: tcon: Add TRI finish interrupt for vblank
The "CPU" (or Intel 8080) interface uses a different interrupt called
TRI_FINISH (most likely TRI being for trigger) to notify the end of frames,
and hence the VBLANK period.
And that interrupt to the possible VBLANK interrupts source.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/de6d6ad8959da77ea3a974a31a4c0c8391178748.1522835818.git-series.maxime.ripard@bootlin.com
Maarten Lankhorst [Wed, 11 Apr 2018 10:35:41 +0000 (12:35 +0200)]
Merge tag 'mmio-clk-config' of https://git./linux/kernel/git/broonie/regmap into drm-misc-next
regmap: MMIO regmap clock configuration
This patch provides a mechanism for specifying a different clock to be
used with the regmap clock integration.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180226131207.GB6681@sirena.org.uk
Oliver O'Halloran [Tue, 3 Apr 2018 05:34:01 +0000 (15:34 +1000)]
drm/sti: Depend on OF rather than selecting it
Commit
cc6b741c6f63 ("drm: sti: remove useless fields from vtg
structure") reworked some code inside of this driver and made it select
CONFIG_OF. This results in the entire OF layer being enabled when
building an allmodconfig on ia64. OF on ia64 is completely unsupported
so this isn't a great state of affairs.
The 0day robot noticed a link-time failure on ia64 caused by
using of_node_to_nid() in an otherwise unrelated driver. The
generic fallback for of_node_to_nid() only exists when:
defined(CONFIG_OF) && defined(CONFIG_NUMA) == false
Since CONFIG_NUMA is usually selected for IA64 we get the link failure.
Fix this by making the driver depend on OF rather than selecting it,
odds are that was the original intent.
Link: https://lists.01.org/pipermail/kbuild-all/2018-March/045172.html
Fixes:
cc6b741c6f63 ("drm: sti: remove useless fields from vtg structure")
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-ia64@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180403053401.30045-1-oohall@gmail.com
Oleksandr Andrushchenko [Tue, 3 Apr 2018 12:32:38 +0000 (15:32 +0300)]
MAINTAINERS: Add drm/xen-front maintainer entry
Add myself as drivers/gpu/drm/xen maintainer.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180403123238.19294-1-andr2000@gmail.com
Oleksandr Andrushchenko [Tue, 3 Apr 2018 11:23:17 +0000 (14:23 +0300)]
drm/xen-front: Add support for Xen PV display frontend
Add support for Xen para-virtualized frontend display driver.
Accompanying backend [1] is implemented as a user-space application
and its helper library [2], capable of running as a Weston client
or DRM master.
Configuration of both backend and frontend is done via
Xen guest domain configuration options [3].
Driver limitations:
1. Only primary plane without additional properties is supported.
2. Only one video mode supported which resolution is configured
via XenStore.
3. All CRTCs operate at fixed frequency of 60Hz.
1. Implement Xen bus state machine for the frontend driver according to
the state diagram and recovery flow from display para-virtualized
protocol: xen/interface/io/displif.h.
2. Read configuration values from Xen store according
to xen/interface/io/displif.h protocol:
- read connector(s) configuration
- read buffer allocation mode (backend/frontend)
3. Handle Xen event channels:
- create for all configured connectors and publish
corresponding ring references and event channels in Xen store,
so backend can connect
- implement event channels interrupt handlers
- create and destroy event channels with respect to Xen bus state
4. Implement shared buffer handling according to the
para-virtualized display device protocol at xen/interface/io/displif.h:
- handle page directories according to displif protocol:
- allocate and share page directories
- grant references to the required set of pages for the
page directory
- allocate xen balllooned pages via Xen balloon driver
with alloc_xenballooned_pages/free_xenballooned_pages
- grant references to the required set of pages for the
shared buffer itself
- implement pages map/unmap for the buffers allocated by the
backend (gnttab_map_refs/gnttab_unmap_refs)
5. Implement kernel modesetiing/connector handling using
DRM simple KMS helper pipeline:
- implement KMS part of the driver with the help of DRM
simple pipepline helper which is possible due to the fact
that the para-virtualized driver only supports a single
(primary) plane:
- initialize connectors according to XenStore configuration
- handle frame done events from the backend
- create and destroy frame buffers and propagate those
to the backend
- propagate set/reset mode configuration to the backend on display
enable/disable callbacks
- send page flip request to the backend and implement logic for
reporting backend IO errors on prepare fb callback
- implement virtual connector handling:
- support only pixel formats suitable for single plane modes
- make sure the connector is always connected
- support a single video mode as per para-virtualized driver
configuration
6. Implement GEM handling depending on driver mode of operation:
depending on the requirements for the para-virtualized environment,
namely requirements dictated by the accompanying DRM/(v)GPU drivers
running in both host and guest environments, number of operating
modes of para-virtualized display driver are supported:
- display buffers can be allocated by either
frontend driver or backend
- display buffers can be allocated to be contiguous
in memory or not
Note! Frontend driver itself has no dependency on contiguous memory for
its operation.
6.1. Buffers allocated by the frontend driver.
The below modes of operation are configured at compile-time via
frontend driver's kernel configuration.
6.1.1. Front driver configured to use GEM CMA helpers
This use-case is useful when used with accompanying DRM/vGPU driver
in guest domain which was designed to only work with contiguous
buffers, e.g. DRM driver based on GEM CMA helpers: such drivers can
only import contiguous PRIME buffers, thus requiring frontend driver
to provide such. In order to implement this mode of operation
para-virtualized frontend driver can be configured to use
GEM CMA helpers.
6.1.2. Front driver doesn't use GEM CMA
If accompanying drivers can cope with non-contiguous memory then, to
lower pressure on CMA subsystem of the kernel, driver can allocate
buffers from system memory.
Note! If used with accompanying DRM/(v)GPU drivers this mode of operation
may require IOMMU support on the platform, so accompanying DRM/vGPU
hardware can still reach display buffer memory while importing PRIME
buffers from the frontend driver.
6.2. Buffers allocated by the backend
This mode of operation is run-time configured via guest domain
configuration through XenStore entries.
For systems which do not provide IOMMU support, but having specific
requirements for display buffers it is possible to allocate such buffers
at backend side and share those with the frontend.
For example, if host domain is 1:1 mapped and has DRM/GPU hardware
expecting physically contiguous memory, this allows implementing
zero-copying use-cases.
Note, while using this scenario the following should be considered:
a) If guest domain dies then pages/grants received from the backend
cannot be claimed back
b) Misbehaving guest may send too many requests to the
backend exhausting its grant references and memory
(consider this from security POV).
Note! Configuration options 1.1 (contiguous display buffers) and 2
(backend allocated buffers) are not supported at the same time.
7. Handle communication with the backend:
- send requests and wait for the responses according
to the displif protocol
- serialize access to the communication channel
- time-out used for backend communication is set to 3000 ms
- manage display buffers shared with the backend
[1] https://github.com/xen-troops/displ_be
[2] https://github.com/xen-troops/libxenbe
[3] https://xenbits.xen.org/gitweb/?p=xen.git;a=blob;f=docs/man/xl.cfg.pod.5.in;h=
a699367779e2ae1212ff8f638eff0206ec1a1cc9;hb=refs/heads/master#l1257
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180403112317.28751-2-andr2000@gmail.com
Daniel Stone [Fri, 23 Mar 2018 13:45:51 +0000 (13:45 +0000)]
drm: Reshuffle getfb error returns
Make it a little more clear what's going on inside of getfb, and also
make it easier to add alternate paths to get a handle in future.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180323134553.15993-3-daniels@collabora.com