OSDN Git Service
Blue Swirl [Mon, 30 Jul 2012 15:51:17 +0000 (15:51 +0000)]
user: fix accidental AREG0 use
Global register AREG0 was always assumed to be usable in user-exec.c,
but this is incorrect for several targets.
Fix with #ifdeffery and by using other variables.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Mon, 30 Jul 2012 15:46:55 +0000 (15:46 +0000)]
qapi: avoid reserved keywords
Clang compiler complained about use of reserved word 'restrict' in SLIRP
and QAPI.
Prefix C keywords with "q_", adjust SLIRP accordingly.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Mon, 30 Jul 2012 15:29:11 +0000 (15:29 +0000)]
sparc: fix expression with uninitialized initial value
err was uninitialized, it's not OK to use |=. Spotted by Clang
compiler.
Fix by implementing the earlier statement which initializes the variable.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Mon, 30 Jul 2012 15:24:23 +0000 (15:24 +0000)]
sparc: fix floppy TC line setup
The qemu_irq for Terminal Count (TC) line between FDC and Slavio misc
device was created only after use, spotted by Clang compiler. Also,
it was not created if the FDC didn't exist.
Rearrange code to fix order. Always create the TC line.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Hervé Poussineau [Sat, 4 Aug 2012 19:10:06 +0000 (21:10 +0200)]
esp: add Tekram DC-390 emulation (PC SCSI adapter)
Difference with AMD PCscsi is that DC-390 contains a EEPROM,
and that a romfile is available to add INT13 support.
This has been successfully tested on:
- MS DOS 6.22 (using DC390 ASPI driver)
- MS Windows 98 SE (using DC390 driver)
- MS Windows NT 3.1 (using DC390 driver)
- MS Windows NT 4.0 (using DC390 driver)
- hard disk and cdrom boot
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Hervé Poussineau [Sat, 4 Aug 2012 19:10:05 +0000 (21:10 +0200)]
Revert "pci: add some stubs"
This reverts commit
0883c5159f1df05d8761014f65451c3c3b77ebcf.
Those stubs were only used by PCI ESP emulation, which is now
not compiled on architectures which have no PCI bus support.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Hervé Poussineau [Sat, 4 Aug 2012 19:10:04 +0000 (21:10 +0200)]
esp: move PCI emulation to a new file esp-pci.c
sparc machines loose ability to instanciate PCI ESP SCSI adapter,
which is not a big loose as they don't have PCI bus support.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Hervé Poussineau [Sat, 4 Aug 2012 19:10:03 +0000 (21:10 +0200)]
esp: move some definitions to header file
These will be used by next commits.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Anthony Liguori [Tue, 7 Aug 2012 14:46:40 +0000 (09:46 -0500)]
Merge remote-tracking branch 'kraxel/usb.58' into staging
* kraxel/usb.58:
usb-storage: fix SYNCHRONIZE_CACHE
usb-storage: improve debug logging
Anthony Liguori [Tue, 7 Aug 2012 14:46:24 +0000 (09:46 -0500)]
Merge remote-tracking branch 'kwolf/for-anthony' into staging
* kwolf/for-anthony:
qemu-img: use QemuOpts instead of QEMUOptionParameter in resize function
qemu-iotests: Be more flexible with image creation options
qemu-iotests: add 039 qcow2 lazy refcounts test
qemu-io: add "abort" command to simulate program crash
qcow2: implement lazy refcounts
qemu-iotests: ignore qemu-img create lazy_refcounts output
docs: add lazy refcounts bit to qcow2 specification
qcow2: introduce dirty bit
docs: add dirty bit to qcow2 specification
qemu-iotests: add qed.py image manipulation utility
qapi: generalize documentation of streaming commands
ide scsi: Mess with geometry only for hard disk devices
Gerd Hoffmann [Fri, 13 Jul 2012 09:38:13 +0000 (11:38 +0200)]
usb-storage: fix SYNCHRONIZE_CACHE
Commit
59310659073d85745854f2f10c4292555c5a1c51 is incomplete,
we'll arrive in the scsi command complete callback in CSW state
and must handle that case correctly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Fri, 13 Jul 2012 09:35:51 +0000 (11:35 +0200)]
usb-storage: improve debug logging
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Anthony Liguori [Tue, 7 Aug 2012 00:31:55 +0000 (19:31 -0500)]
slirp: fix build on mingw32
in_addr_t isn't available on mingw32. Just use an unsigned long instead. I
considered typedef'ing in_addr_t on mingw32 but this would potentially be
brittle if mingw32 did introduce the type.
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Dong Xu Wang [Mon, 6 Aug 2012 02:18:42 +0000 (10:18 +0800)]
qemu-img: use QemuOpts instead of QEMUOptionParameter in resize function
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Fri, 27 Jul 2012 13:14:28 +0000 (15:14 +0200)]
qemu-iotests: Be more flexible with image creation options
qemu-iotests already filters out image creation options that may be
present or not in order to get the same output in both cases. However,
often it only considers the default value of the option. Cover all valid
values instead so that ./check -o name=value can be used successfull for
all of them.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Fri, 27 Jul 2012 08:05:24 +0000 (09:05 +0100)]
qemu-iotests: add 039 qcow2 lazy refcounts test
This tests establishes the basic post-conditions of the qcow2 lazy
refcounts features:
1. If the image was closed normally, it is marked clean.
2. If an allocating write was performed and the image was not closed
normally, then it is marked dirty.
a. Written data can be read back successfully.
b. The image file can be repaired and will be marked clean again.
c. The image file is automatically repaired when opened read/write.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Fri, 27 Jul 2012 08:05:23 +0000 (09:05 +0100)]
qemu-io: add "abort" command to simulate program crash
Avoiding data loss and corruption is the top requirement for image file
formats. The qemu-io "abort" command makes it possible to simulate
program crashes and does not give the image format a chance to cleanly
shut down. This command is useful for data integrity test cases.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Fri, 27 Jul 2012 08:05:22 +0000 (09:05 +0100)]
qcow2: implement lazy refcounts
Lazy refcounts is a performance optimization for qcow2 that postpones
refcount metadata updates and instead marks the image dirty. In the
case of crash or power failure the image will be left in a dirty state
and repaired next time it is opened.
Reducing metadata I/O is important for cache=writethrough and
cache=directsync because these modes guarantee that data is on disk
after each write (hence we cannot take advantage of caching updates in
RAM). Refcount metadata is not needed for guest->file block address
translation and therefore does not need to be on-disk at the time of
write completion - this is the motivation behind the lazy refcount
optimization.
The lazy refcount optimization must be enabled at image creation time:
qemu-img create -f qcow2 -o compat=1.1,lazy_refcounts=on a.qcow2 10G
qemu-system-x86_64 -drive if=virtio,file=a.qcow2,cache=writethrough
Update qemu-iotests 031 and 036 since the extension header size changes
when we add feature bit table entries.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Fri, 27 Jul 2012 08:05:21 +0000 (09:05 +0100)]
qemu-iotests: ignore qemu-img create lazy_refcounts output
Hide the default lazy_refcounts=off output from qemu-img like we do with
other image creation options. This ensures that existing golden outputs
continue to pass despite the new option that has been added.
Note that this patch applies before the one that actually introduces the
lazy_refcounts=on|off option. This ensures git-bisect(1) continues to
work.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Fri, 27 Jul 2012 08:05:20 +0000 (09:05 +0100)]
docs: add lazy refcounts bit to qcow2 specification
The lazy refcounts bit indicates that this image can take advantage of
the dirty bit and that refcount updates can be postponed.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Fri, 27 Jul 2012 08:05:19 +0000 (09:05 +0100)]
qcow2: introduce dirty bit
This patch adds an incompatible feature bit to mark images that have not
been closed cleanly. When a dirty image file is opened a consistency
check and repair is performed.
Update qemu-iotests 031 and 036 since the extension header size changes
when we add feature bit table entries.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Fri, 27 Jul 2012 08:05:18 +0000 (09:05 +0100)]
docs: add dirty bit to qcow2 specification
The dirty bit will make it possible to perform lazy refcount updates,
where the image file is not kept consistent all the time. Upon opening
a dirty image file, it is necessary to perform a consistency check and
repair any incorrect refcounts.
Therefore the dirty bit must be an incompatible feature bit. We don't
want old programs accessing a file with stale refcounts.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Fri, 27 Jul 2012 08:01:27 +0000 (09:01 +0100)]
qemu-iotests: add qed.py image manipulation utility
The qed.py utility can inspect and manipulate QED image files. It can
be used for testing to see the state of image metadata and also to
inject corruptions into the image file. It also has a scrubbing feature
to copy just the metadata out of an image file, allowing users to share
broken image files without revealing data in bug reports.
This has lived in my local repo for a long time but could be useful
to others.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Tue, 24 Jul 2012 11:03:39 +0000 (13:03 +0200)]
qapi: generalize documentation of streaming commands
Talk about background operations in general, rather than specifically
about streaming.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Markus Armbruster [Thu, 12 Jul 2012 16:52:31 +0000 (18:52 +0200)]
ide scsi: Mess with geometry only for hard disk devices
Legacy -drive cyls=... are now ignored completely when the drive
doesn't back a hard disk device. Before, they were first checked
against a hard disk's limits, then ignored.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Mon, 6 Aug 2012 13:26:14 +0000 (15:26 +0200)]
virtio: fix vhost handling
Commit
b1f416aa8d870fab71030abc9401cfc77b948e8e breaks vhost_net
because it always registers the virtio_pci_host_notifier_read() handler
function on the ioeventfd, even when vhost_net.ko is using the ioeventfd.
The result is both QEMU and vhost_net.ko polling on the same eventfd
and the virtio_net.ko guest driver seeing inconsistent results:
# ifconfig eth0 192.168.0.1 netmask 255.255.255.0
virtio_net virtio0: output:id 0 is not a head!
To fix this, proceed the same as we do for irqfd: add a parameter to
virtio_queue_set_host_notifier_fd_handler and in that case only set
the notifier, not the handler.
Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Tested-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Mon, 6 Aug 2012 18:59:59 +0000 (13:59 -0500)]
Merge remote-tracking branch 'kiszka/queues/slirp' into staging
* kiszka/queues/slirp:
slirp: Handle whole 127.0.0.0/8 network as local addresses.
Blue Swirl [Sat, 4 Aug 2012 17:58:23 +0000 (17:58 +0000)]
Merge branch 'axp-next' of git://repo.or.cz/qemu/rth
* 'axp-next' of git://repo.or.cz/qemu/rth:
alpha-linux-user: Fix the getpriority syscall
alpha-linux-user: Properly handle the non-rt sigprocmask syscall.
alpha-linux-user: Fix a3 error return with v0 error bypass.
linux-user: Translate pipe2 flags; add to strace
linux-user: Allocate the right amount of space for non-fixed file maps
linux-user: Handle O_SYNC, O_NOATIME, O_CLOEXEC, O_PATH
linux-user: Sync fcntl.h bits with the kernel
alpha-linux-user: Handle TARGET_SSI_IEEE_RAISE_EXCEPTION properly
alpha-linux-user: Work around hosted mmap allocation problems
alpha-linux-user: Fix signal handling
Richard Henderson [Thu, 7 Jun 2012 22:14:50 +0000 (15:14 -0700)]
alpha-linux-user: Fix the getpriority syscall
Alpha uses unbiased priority values in the syscall, with the a3
return value signaling error conditions. Therefore, properly
interpret the libc getpriority as needed for the guest rather
than passing the host value through unchanged.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Thu, 7 Jun 2012 22:02:49 +0000 (15:02 -0700)]
alpha-linux-user: Properly handle the non-rt sigprocmask syscall.
Name the syscall properly for QEMU, kernel source notwithstanding.
Fix syntax errors in the code thus enabled within do_syscall.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Thu, 7 Jun 2012 21:47:41 +0000 (14:47 -0700)]
alpha-linux-user: Fix a3 error return with v0 error bypass.
We were failing to initialize a3 for syscalls that bypass the
negative return value error check.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Sat, 2 Jun 2012 01:48:39 +0000 (18:48 -0700)]
linux-user: Translate pipe2 flags; add to strace
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Fri, 1 Jun 2012 23:07:52 +0000 (16:07 -0700)]
linux-user: Allocate the right amount of space for non-fixed file maps
If we let the kernel handle the implementation of mmap_find_vma,
via an anon mmap, we must use the size as indicated by the user
and not the size truncated to the filesize.
This happens often in ld.so, where we initially mmap the file to
the size of the text+data+bss to reserve an area, then mmap+fixed
over the top to properly handle data and bss.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Wed, 25 Jul 2012 21:30:34 +0000 (14:30 -0700)]
linux-user: Handle O_SYNC, O_NOATIME, O_CLOEXEC, O_PATH
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Wed, 25 Jul 2012 21:29:31 +0000 (14:29 -0700)]
linux-user: Sync fcntl.h bits with the kernel
For each target, only define the bits that appear in
arch/target/include/asm/fcntl.h. Mirror the kernel's
asm-generic layout by handling anything undefined afterward.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Fri, 1 Jun 2012 16:08:21 +0000 (09:08 -0700)]
alpha-linux-user: Handle TARGET_SSI_IEEE_RAISE_EXCEPTION properly
We weren't aggregating the exceptions, nor raising signals properly.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Thu, 31 May 2012 23:09:39 +0000 (16:09 -0700)]
alpha-linux-user: Work around hosted mmap allocation problems
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Thu, 31 May 2012 19:05:23 +0000 (12:05 -0700)]
alpha-linux-user: Fix signal handling
Proper signal numbers were not defined, and EXCP_INTERRUPT
was unhandled, leading to all sorts of subtle confusion.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Blue Swirl [Sun, 8 Jul 2012 19:03:33 +0000 (19:03 +0000)]
bitops: drop volatile qualifier
Qualifier 'volatile' is not useful for applications, it's too strict
for single threaded code but does not give the real atomicity guarantees
needed for multithreaded code.
Drop them and now useless casts.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Peter Maydell [Thu, 2 Aug 2012 17:30:27 +0000 (18:30 +0100)]
configure: Fix set-but-not-used warning in Xen 4.1 probe
The Xen 4.1 probe never uses the return value from xc_interface_open(),
so was provoking a compiler warning on newer gcc. Fix by not bothering
to put the return value anywhere.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Peter Maydell [Thu, 2 Aug 2012 17:30:26 +0000 (18:30 +0100)]
configure: Don't run Xen compile checks in subshells
The Xen compile checks are currently run inside subshells. This
is unnecessary and has the effect that if do_cc() exits with
an error message then this only causes the subshell to exit,
not the whole of configure, which is confusing. Remove the
subshells, changing:
if ( cat ; compile_prog ) ; then ...
to
if cat && compile_prog ; then ...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Chegu Vinod [Tue, 17 Jul 2012 04:31:30 +0000 (21:31 -0700)]
Fixes related to processing of qemu's -numa option
The -numa option to qemu is used to create [fake] numa nodes
and expose them to the guest OS instance.
There are a couple of issues with the -numa option:
a) Max VCPU's that can be specified for a guest while using
the qemu's -numa option is 64. Due to a typecasting issue
when the number of VCPUs is > 32 the VCPUs don't show up
under the specified [fake] numa nodes.
b) KVM currently has support for 160VCPUs per guest. The
qemu's -numa option has only support for upto 64VCPUs
per guest.
This patch addresses these two issues.
Below are examples of (a) and (b)
a) >32 VCPUs are specified with the -numa option:
/usr/local/bin/qemu-system-x86_64 \
-enable-kvm \
71:01:01 \
-net tap,ifname=tap0,script=no,downscript=no \
-vnc :4
...
Upstream qemu :
--------------
QEMU 1.1.50 monitor - type 'help' for more information
(qemu) info numa
6 nodes
node 0 cpus: 0 1 2 3 4 5 6 7 8 9 32 33 34 35 36 37 38 39 40 41
node 0 size: 131072 MB
node 1 cpus: 10 11 12 13 14 15 16 17 18 19 42 43 44 45 46 47 48 49 50 51
node 1 size: 131072 MB
node 2 cpus: 20 21 22 23 24 25 26 27 28 29 52 53 54 55 56 57 58 59
node 2 size: 131072 MB
node 3 cpus: 30
node 3 size: 131072 MB
node 4 cpus:
node 4 size: 131072 MB
node 5 cpus: 31
node 5 size: 131072 MB
With the patch applied :
-----------------------
QEMU 1.1.50 monitor - type 'help' for more information
(qemu) info numa
6 nodes
node 0 cpus: 0 1 2 3 4 5 6 7 8 9
node 0 size: 131072 MB
node 1 cpus: 10 11 12 13 14 15 16 17 18 19
node 1 size: 131072 MB
node 2 cpus: 20 21 22 23 24 25 26 27 28 29
node 2 size: 131072 MB
node 3 cpus: 30 31 32 33 34 35 36 37 38 39
node 3 size: 131072 MB
node 4 cpus: 40 41 42 43 44 45 46 47 48 49
node 4 size: 131072 MB
node 5 cpus: 50 51 52 53 54 55 56 57 58 59
node 5 size: 131072 MB
b) >64 VCPUs specified with -numa option:
/usr/local/bin/qemu-system-x86_64 \
-enable-kvm \
-cpu Westmere,+rdtscp,+pdpe1gb,+dca,+pdcm,+xtpr,+tm2,+est,+smx,+vmx,+ds_cpl,+monitor,+dtes64,+pclmuldq,+pbe,+tm,+ht,+ss,+acpi,+d-vnc :4
...
Upstream qemu :
--------------
only 63 CPUs in NUMA mode supported.
only 64 CPUs in NUMA mode supported.
QEMU 1.1.50 monitor - type 'help' for more information
(qemu) info numa
8 nodes
node 0 cpus: 6 7 8 9 38 39 40 41 70 71 72 73
node 0 size: 65536 MB
node 1 cpus: 10 11 12 13 14 15 16 17 18 19 42 43 44 45 46 47 48 49 50 51 74 75 76 77 78 79
node 1 size: 65536 MB
node 2 cpus: 20 21 22 23 24 25 26 27 28 29 52 53 54 55 56 57 58 59 60 61
node 2 size: 65536 MB
node 3 cpus: 30 62
node 3 size: 65536 MB
node 4 cpus:
node 4 size: 65536 MB
node 5 cpus:
node 5 size: 65536 MB
node 6 cpus: 31 63
node 6 size: 65536 MB
node 7 cpus: 0 1 2 3 4 5 32 33 34 35 36 37 64 65 66 67 68 69
node 7 size: 65536 MB
With the patch applied :
-----------------------
QEMU 1.1.50 monitor - type 'help' for more information
(qemu) info numa
8 nodes
node 0 cpus: 0 1 2 3 4 5 6 7 8 9
node 0 size: 65536 MB
node 1 cpus: 10 11 12 13 14 15 16 17 18 19
node 1 size: 65536 MB
node 2 cpus: 20 21 22 23 24 25 26 27 28 29
node 2 size: 65536 MB
node 3 cpus: 30 31 32 33 34 35 36 37 38 39
node 3 size: 65536 MB
node 4 cpus: 40 41 42 43 44 45 46 47 48 49
node 4 size: 65536 MB
node 5 cpus: 50 51 52 53 54 55 56 57 58 59
node 5 size: 65536 MB
node 6 cpus: 60 61 62 63 64 65 66 67 68 69
node 6 size: 65536 MB
node 7 cpus: 70 71 72 73 74 75 76 77 78 79
Signed-off-by: Chegu Vinod <chegu_vinod@hp.com>, Jim Hull <jim.hull@hp.com>, Craig Hada <craig.hada@hp.com>
Tested-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Dunrong Huang [Sat, 4 Aug 2012 11:29:55 +0000 (19:29 +0800)]
build: Fix build breakage detected by buildbot
More details:
http://buildbot.b1-systems.de/qemu/builders/xen_unstable/builds/83/steps/compile/logs/stdio
VLANState has been removed since commit
a005d07, so "vlan id" should be
fetched using net_hub_id_for_client().
Signed-off-by: Dunrong Huang <riegamaths@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Fri, 3 Aug 2012 23:28:37 +0000 (18:28 -0500)]
fips: fix build on !Linux
Commit
0f66998 makes -enable-fips conditional on Linux hosts but then uses it
unconditionally in vl.c.
Fix this by moving the fips handling to os-posix.c and adding a condition.
Cc: Paul Moore <pmoore@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anders Waldenborg [Fri, 13 Jul 2012 20:54:17 +0000 (22:54 +0200)]
slirp: Handle whole 127.0.0.0/8 network as local addresses.
Changes so translation of remote address to the host's ip address in
the virtual network happens for all addresses in the 127.0.0.0/8
network, not just 127.0.0.1.
This fixes so that hostfwd bound to addresses such as 127.0.0.2 works.
Signed-off-by: Anders Waldenborg <anders@0x63.nu>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Anthony Liguori [Fri, 3 Aug 2012 20:46:17 +0000 (15:46 -0500)]
Merge remote-tracking branch 'bonzini/scsi-next' into staging
* bonzini/scsi-next:
scsi: add support for ATA_PASSTHROUGH_xx scsi command
esp: add missing const on TypeInfo structures
esp: enable for all PCI machines
Revert "megasas: disable due to build breakage"
megasas: static SAS addresses
scsi-disk: fix compilation with DEBUG_SCSI
megasas: Update function megasys_scsi_uninit
SCSI: STARTSTOPUNIT only eject/load media if powercondition is 0
SCSI: Update the sense code for PREVENT REMOVAL errors
Cong Meng [Fri, 3 Aug 2012 04:02:19 +0000 (12:02 +0800)]
scsi: add support for ATA_PASSTHROUGH_xx scsi command
Correct the command names of opcode 0x85 and 0xa1, and calculate
their xfer size from CDB.
Signed-off-by: Cong Meng <mc@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paul Moore [Fri, 3 Aug 2012 18:39:21 +0000 (14:39 -0400)]
vnc: disable VNC password authentication (security type 2) when in FIPS mode
FIPS 140-2 requires disabling certain ciphers, including DES, which is used
by VNC to obscure passwords when they are sent over the network. The
solution for FIPS users is to disable the use of VNC password auth when the
host system is operating in FIPS compliance mode and the user has specified
'-enable-fips' on the QEMU command line.
This patch causes QEMU to emit a message to stderr when the host system is
running in FIPS mode and a VNC password was specified on the commend line.
If the system is not running in FIPS mode, or is running in FIPS mode but
VNC password authentication was not requested, QEMU operates normally.
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Fri, 3 Aug 2012 19:28:26 +0000 (14:28 -0500)]
Merge remote-tracking branch 'qmp/queue/qmp' into staging
* qmp/queue/qmp:
hmp: show the backing file depth
block: Use bdrv_get_backing_file_depth()
block: create bdrv_get_backing_file_depth()
qapi: qapi.py: allow the "'" character to be escaped
Anthony Liguori [Fri, 3 Aug 2012 18:56:39 +0000 (13:56 -0500)]
Merge remote-tracking branch 'afaerber-or/qom-cpu-4' into staging
* afaerber-or/qom-cpu-4:
cpu: Move thread_kicked to CPUState
cpu: Move thread field into CPUState
cpu: Move CPU_COMMON_THREAD into CPUState
qemu-thread: Let qemu_thread_is_self() return bool
Anthony Liguori [Fri, 3 Aug 2012 18:54:35 +0000 (13:54 -0500)]
Merge remote-tracking branch 'sstabellini/xen-fixes-
20120801' into staging
* sstabellini/xen-fixes-
20120801:
fix Xen compilation
configure: Fix xen probe with Xen 4.2 and later
Anthony Liguori [Fri, 3 Aug 2012 18:54:05 +0000 (13:54 -0500)]
Merge remote-tracking branch 'stefanha/net' into staging
* stefanha/net:
net: add the support for -netdev socket, listen
net: fix the coding style
hub: add the support for hub own flow control
net: determine if packets can be sent before net queue deliver packets
net: cleanup deliver/deliver_iov func pointers
net: Make "info network" output more readable info
net: Rename qemu_del_vlan_client() to qemu_del_net_client()
net: Rename vc local variables to nc
net: Rename VLANClientState to NetClientState
net: Rename non_vlan_clients to net_clients
net: Remove VLANState
net: Remove vlan code from net.c
net: Convert qdev_prop_vlan to peer with hub
net: Drop vlan argument to qemu_new_net_client()
hub: Check that hubs are configured correctly
net: Look up 'vlan' net clients using hubs
net: Use hubs for the vlan feature
net: Add a hub net client
net: Add interface to bridge when SIOCBRADDIF isn't available
Anthony Liguori [Fri, 3 Aug 2012 18:51:19 +0000 (13:51 -0500)]
Merge remote-tracking branch 'stefanha/trivial-patches' into staging
* stefanha/trivial-patches:
exec.c: Remove out of date comment
exec.c: Use subpages for large unaligned mappings
exec.c: Fix off-by-one error in register_subpage
socket: clean up redundant assignment
qom: Clean libuser object and dependency files
usb: Clean common object and dependency files
Anthony Liguori [Fri, 3 Aug 2012 18:50:41 +0000 (13:50 -0500)]
Merge remote-tracking branch 'aneesh/for-upstream' into staging
* aneesh/for-upstream:
hw/9pfs: Fix assert when disabling migration
configure: Fix build with capabilities
Peter Maydell [Wed, 1 Aug 2012 13:35:47 +0000 (14:35 +0100)]
exec.c: Remove out of date comment
Remove an out of date comment: this comment used to be attached to
cpu_register_physical_memory_log(), before commit
0f0cb164 accidentally
inserted a couple of other functions between the comment and its function.
It is in any case obsolete since (a) the function arguments it refers
to have been replaced with a single MemoryRegionSection* argument and
(b) the inability to handle regions whose offset_within_address_space
and offset_within_region aren't equally aligned was fixed as part of
the rewrite of this code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Tyler Hall [Wed, 25 Jul 2012 22:45:04 +0000 (18:45 -0400)]
exec.c: Use subpages for large unaligned mappings
Registering a multi-page memory region that is non-page-aligned results
in a subpage from the start to the page boundary, some number of full
pages, and possibly another subpage from the last page boundary to the
end. The full pages will have a value for offset_within_region that is
not a multiple of TARGET_PAGE_SIZE. Accesses through softmmu are unable
to handle this and will segfault.
Handling full pages through subpages is not optimal, but only
non-page-aligned mappings take the penalty.
Signed-off-by: Tyler Hall <tylerwhall@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Tyler Hall [Wed, 25 Jul 2012 22:45:03 +0000 (18:45 -0400)]
exec.c: Fix off-by-one error in register_subpage
subpage_register() expects "end" to be the last byte in the mapping.
Registering a non-page-aligned memory region that extends up to or
beyond a page boundary causes subpage_register() to silently fail
through the (end >= PAGE_SIZE) check.
This bug does not cause noticeable problems for mappings that do not
extend to a page boundary, though they do register an extra byte.
Signed-off-by: Tyler Hall <tylerwhall@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Amos Kong [Fri, 3 Aug 2012 03:06:22 +0000 (11:06 +0800)]
socket: clean up redundant assignment
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Benoît Canet [Thu, 2 Aug 2012 08:22:49 +0000 (10:22 +0200)]
hmp: show the backing file depth
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Benoît Canet [Thu, 2 Aug 2012 08:22:48 +0000 (10:22 +0200)]
block: Use bdrv_get_backing_file_depth()
Use the dedicated counting function in qmp_query_block in order to
propagate the backing file depth to HMP and add backing_file_depth
to qmp-commands.hx
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Benoît Canet [Thu, 2 Aug 2012 08:22:47 +0000 (10:22 +0200)]
block: create bdrv_get_backing_file_depth()
Create bdrv_get_backing_file_depth() in order to be able to show
in QMP and HMP how many ancestors backing an image a block device
have.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Jan Kiszka [Mon, 23 Jul 2012 11:45:01 +0000 (13:45 +0200)]
qom: Clean libuser object and dependency files
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Jan Kiszka [Mon, 23 Jul 2012 11:44:35 +0000 (13:44 +0200)]
usb: Clean common object and dependency files
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Hervé Poussineau [Thu, 2 Aug 2012 08:40:30 +0000 (10:40 +0200)]
esp: add missing const on TypeInfo structures
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 2 Aug 2012 13:41:47 +0000 (15:41 +0200)]
esp: enable for all PCI machines
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 1 Aug 2012 10:56:17 +0000 (12:56 +0200)]
Revert "megasas: disable due to build breakage"
This reverts commit
92336855975805d88c7979f53bc05c2d47abab04.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hannes Reinecke [Wed, 1 Aug 2012 10:46:50 +0000 (12:46 +0200)]
megasas: static SAS addresses
This patch introduces a new property 'sas_address' which
allows the user to specify the SAS address for the HBA.
The default address is following the NAA locally assigned
identifier format with the locally assigned address
0x525400 as used eg for the MAC addresses.
The lower bytes are set to the pci address which
will ensure uniqueness for the local machine.
The port addresses are now calculated based on the magic
number 0x1221 (which is found in real hardware, too) plus
the device number.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Andreas Faerber <afaerber@suse.de>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 31 Jul 2012 14:10:23 +0000 (16:10 +0200)]
scsi-disk: fix compilation with DEBUG_SCSI
Reported-by: Gerhard Wiesinger <lists@wiesinger.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stefan Weil [Tue, 31 Jul 2012 05:54:57 +0000 (07:54 +0200)]
megasas: Update function megasys_scsi_uninit
Commit
f90c2bcdbc69e41e575f868b984c3e2de8f51bac changed
PCIUnregisterFunc, therefore the function prototype
needs an update.
megasas.o is currently not linked, so this bug was not
detected by the buildbots.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ronnie Sahlberg [Sat, 28 Jul 2012 01:14:53 +0000 (11:14 +1000)]
SCSI: STARTSTOPUNIT only eject/load media if powercondition is 0
The START STOP UNIT command will only eject/load media if
power condition is zero.
If power condition is !0 then LOEJ and START will be ignored.
From MMC (sbc contains similar wordings too)
The Power Conditions field requests the block device to be placed
in the power condition defined in
Table 558. If this field has a value other than 0h then the Start
and LoEj bits shall be ignored.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ronnie Sahlberg [Sun, 29 Jul 2012 21:52:03 +0000 (07:52 +1000)]
SCSI: Update the sense code for PREVENT REMOVAL errors
Change the sense codes for failures to eject a device that is locked
by PREVENT_ALLOW_MEDIUM_REMOVAL from
the generic MEDIA_LOAD_OR_EJECT_FAILED to the more specific
MEDIUM_REMOVAL_PREVENTED.
The second sense code is more accurate, and is also listed in MMC annex F
for the recommended sense codes for MMC devices while the first sense code is not.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Maydell [Thu, 2 Aug 2012 12:45:54 +0000 (13:45 +0100)]
Support 'help' as a synonym for '?' in command line options
For command line options which permit '?' meaning 'please list the
permitted values', add support for 'help' as a synonym, by abstracting
the check out into a helper function.
This change means that in some cases where we were being lazy in
our string parsing, "?junk" will now be rejected as an invalid option
rather than being (undocumentedly) treated the same way as "?".
Update the documentation to use 'help' rather than '?', since '?'
is a shell metacharacter and thus prone to fail confusingly if there
is a single character filename in the current working directory and
the '?' has not been escaped. It's therefore better to steer users
towards 'help', though '?' is retained for backwards compatibility.
We do not, however, update the output of the system emulator's -help
(or any documentation autogenerated from the qemu-options.hx which
is the source of the -help text) because libvirt parses our -help
output and will break. At a later date when QEMU provides a better
interface so libvirt can avoid having to do this, we can update the
-help text too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Andreas Färber [Wed, 2 May 2012 15:49:49 +0000 (17:49 +0200)]
cpu: Move thread_kicked to CPUState
Change field type to bool.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Wed, 2 May 2012 15:00:37 +0000 (17:00 +0200)]
cpu: Move thread field into CPUState
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Wed, 2 May 2012 13:24:40 +0000 (15:24 +0200)]
cpu: Move CPU_COMMON_THREAD into CPUState
CPU_COMMON_THREAD was only used for Windows, adding an hThread field
to CPU_COMMON.
Move the field into QOM CPUState and change its type to HANDLE,
which it is assigned from. This requires Windows headers, pulled in
through qemu-thread.h.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Wed, 2 May 2012 15:21:31 +0000 (17:21 +0200)]
qemu-thread: Let qemu_thread_is_self() return bool
qemu_cpu_is_self(), passing the return value through, will later be
adapted to return bool as well.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Luiz Capitulino [Fri, 29 Jun 2012 23:53:37 +0000 (20:53 -0300)]
qapi: qapi.py: allow the "'" character to be escaped
Support escaping the escape character, and make more robust (don't die
for '', handle ' without matching '.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Richard W.M. Jones [Thu, 5 Jul 2012 03:32:44 +0000 (03:32 +0000)]
Replace 'struct siginfo' with 'siginfo_t'.
glibc 2.16 will remove the undocumented definition of 'struct siginfo'
from <bits/siginfo.h>.
This change is already present in glibc 2.15.90, so qemu compilation
of certain targets (eg. cris-user) breaks.
This struct was always typedef'd to be the same as 'siginfo_t' which
is what POSIX documents, so use that instead.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Igor Mammedov [Mon, 23 Jul 2012 13:22:28 +0000 (15:22 +0200)]
target-i386: move cpu_reset and reset callback to cpu.c
Moving reset callback into cpu object from board level and
resetting cpu at the end of x86_cpu_realize() will allow properly
create cpu object during run-time (hotplug) without calling reset externaly.
When reset over QOM hierarchy is implemented, reset callback
should be removed.
v2:
- leave cpu_reset in pc_new_cpu() for now, it's to be cleaned up when APIC
init is moved in cpu.c
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Igor Mammedov [Mon, 23 Jul 2012 13:22:27 +0000 (15:22 +0200)]
target-i386: move cpu halted decision into x86_cpu_reset
MP initialization protocol differs between cpu families, and for P6 and
onward models it is up to CPU to decide if it will be BSP using this
protocol, so try to model this. However there is no point in implementing
MP initialization protocol in qemu. Thus first CPU is always marked as BSP.
This patch:
- moves decision to designate BSP from board into cpu, making cpu
self-sufficient in this regard. Later it will allow to cleanup hw/pc.c
and remove cpu_reset and wrappers from there.
- stores flag that CPU is BSP in IA32_APIC_BASE to model behavior
described in Inted SDM vol 3a part 1 chapter 8.4.1
- uses MSR_IA32_APICBASE_BSP flag in apic_base for checking if cpu is BSP
patch is based on Jan Kiszka's proposal:
http://thread.gmane.org/gmane.comp.emulators.qemu/100806
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Stefano Stabellini [Wed, 1 Aug 2012 13:44:11 +0000 (13:44 +0000)]
fix Xen compilation
xen_pt_unregister_device is used as PCIUnregisterFunc, so it should
match the type.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Tested-by: Andreas Färber <afaerber@suse.de>
Stefano Stabellini [Wed, 1 Aug 2012 10:19:09 +0000 (11:19 +0100)]
fix Xen compilation
xen_pt_unregister_device is used as PCIUnregisterFunc, so it should
match the type.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony PERARD [Wed, 1 Aug 2012 13:42:44 +0000 (13:42 +0000)]
configure: Fix xen probe with Xen 4.2 and later
The xs.h header is now deprecated and produces a warning. This prevents the
configure script from enabling Xen with xen-unstable whom will become 4.2. As
this header is not anymore common to every version of Xen, we just remove it
from the early probe for Xen.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Zhi Yong Wu [Fri, 20 Jul 2012 13:25:53 +0000 (14:25 +0100)]
net: add the support for -netdev socket, listen
The -net socket,listen option does not work with the newer -netdev
syntax:
http://lists.gnu.org/archive/html/qemu-devel/2011-11/msg01508.html
This patch makes it work now.
For the case where one vlan has multiple listenning sockets,
the patch will also provide the support.
Supported syntax:
1.) -net socket,listen=127.0.0.1:1234,vlan=0
2.) -net socket,listen=127.0.0.1:1234,vlan=0 -net socket,listen=127.0.0.1:1235,vlan=0
3.) -netdev socket,listen=127.0.0.1:1234,id=socket0
Drop the NetSocketListenState struct and add a listen_fd field
to NetSocketState. When a -netdev socket,listen= instance is created
there will be a NetSocketState with fd=-1 and a valid listen_fd. The
net_socket_accept() handler waits for listen_fd to become readable and
then accepts the connection. When this state transition happens, we no
longer monitor listen_fd for incoming connections...until the client
disconnects again.
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Zhi Yong Wu [Fri, 20 Jul 2012 13:25:52 +0000 (14:25 +0100)]
net: fix the coding style
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Zhi Yong Wu [Tue, 24 Jul 2012 15:35:19 +0000 (16:35 +0100)]
hub: add the support for hub own flow control
Only when all other hub port's *peer* .can_receive() all return 1,
the source hub port .can_receive() return 1.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Zhi Yong Wu [Tue, 24 Jul 2012 15:35:18 +0000 (16:35 +0100)]
net: determine if packets can be sent before net queue deliver packets
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Zhi Yong Wu [Tue, 24 Jul 2012 15:35:17 +0000 (16:35 +0100)]
net: cleanup deliver/deliver_iov func pointers
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Zhi Yong Wu [Tue, 24 Jul 2012 15:35:16 +0000 (16:35 +0100)]
net: Make "info network" output more readable info
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Stefan Hajnoczi [Tue, 24 Jul 2012 15:35:15 +0000 (16:35 +0100)]
net: Rename qemu_del_vlan_client() to qemu_del_net_client()
Another step in moving the vlan feature out of net core. Users only
deal with NetClientState and therefore qemu_del_vlan_client() should be
named qemu_del_net_client().
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Stefan Hajnoczi [Tue, 24 Jul 2012 15:35:14 +0000 (16:35 +0100)]
net: Rename vc local variables to nc
Now that VLANClientState has been renamed to NetClientState all 'vc'
local variables should be 'nc'. Much of the code already used 'nc' but
there are places where 'vc' needs to be renamed.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Stefan Hajnoczi [Tue, 24 Jul 2012 15:35:13 +0000 (16:35 +0100)]
net: Rename VLANClientState to NetClientState
The vlan feature is no longer part of net core. Rename VLANClientState
to NetClientState because net clients are not explicitly associated with
a vlan at all, instead they have a peer net client to which they are
connected.
This patch is a mechanical search-and-replace except for a few
whitespace fixups where changing VLANClientState to NetClientState
misaligned whitespace.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Stefan Hajnoczi [Tue, 24 Jul 2012 15:35:12 +0000 (16:35 +0100)]
net: Rename non_vlan_clients to net_clients
There is no longer a distinction between vlan clients and non-vlan
clients in the net core. The net core only knows about point-to-point
clients which are connected to a peer. It's time to rename the global
list of net clients since it no longer refers to vlans at all.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Stefan Hajnoczi [Tue, 24 Jul 2012 15:35:11 +0000 (16:35 +0100)]
net: Remove VLANState
VLANState is no longer used and can be removed.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Stefan Hajnoczi [Tue, 24 Jul 2012 15:35:10 +0000 (16:35 +0100)]
net: Remove vlan code from net.c
The vlan implementation in net.c has been replaced by hubs so we can
remove the code.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Zhi Yong Wu [Tue, 24 Jul 2012 15:35:09 +0000 (16:35 +0100)]
net: Convert qdev_prop_vlan to peer with hub
Instead of using VLANState use net/hub.h to support the vlan qdev
property. The vlan qdev property becomes an alias for the peer qdev
property but is represented as a VLAN ID number. When a VLAN ID is
selected the device will really peer with a hub port.
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Stefan Hajnoczi [Tue, 24 Jul 2012 15:35:08 +0000 (16:35 +0100)]
net: Drop vlan argument to qemu_new_net_client()
Since hubs are now used to implement the 'vlan' feature and the vlan
argument is always NULL, remove the argument entirely and update all net
clients that use qemu_new_net_client().
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Stefan Hajnoczi [Tue, 24 Jul 2012 15:35:07 +0000 (16:35 +0100)]
hub: Check that hubs are configured correctly
Checks can be performed to make sure that hubs have at least one NIC and
one host device, warning the user if this is not the case.
Configurations which do not meet this rule tend to be broken but just
emit a warning. This patch preserves compatibility with the checks
performed by net core on vlans.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Stefan Hajnoczi [Tue, 24 Jul 2012 15:35:06 +0000 (16:35 +0100)]
net: Look up 'vlan' net clients using hubs
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Stefan Hajnoczi [Tue, 24 Jul 2012 15:35:05 +0000 (16:35 +0100)]
net: Use hubs for the vlan feature
Stop using the special-case vlan code in net.c. Instead use the hub net
client to implement the vlan feature. The next patch will remove vlan
code from net.c completely.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>