drm/amdgpu/gfx9: allow updating gfx mgpg state

Wire up the functions to control medium grained
powergating.

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx9: allow updating gfx cgpg state

Wire up the enable functions to enable coarse
grained powegating.

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx9: allow updating sck slowdown and cp pg state

More stuff for gfx pg.

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx9: add enable/disable funcs for cp power gating

Used to enable/disable cp powergating.

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx9: enable/disable sck slowdown thru rlc-smu handshake

Required for proper powergating operation.

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: init gfx power gating on raven

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx9: rlc save&restore list programming

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx9: add rlc bo init/fini

setup the save and restore buffers used for gfx
powergating.

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: correct gfx9 csb size

programming pa_sc_raster_config/config1 reg is removed from gfx9 csb

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx9: enable cp interrupt for CGCG/CGLS/MGCG

Required for proper handshaking between the GFX and RLC.

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx9: extend rlc fw setup

Required for gfx powergating.

Change-Id: I5a2f8f41253686d8bb776a92aa68bf90877ebaa8
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add gfx clock gating for raven

Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx9: add raven gfx config

Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx9: add chip name for raven when initializing microcode

Fetch the correct ucode for raven.

Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add gc9.1 golden setting (v2)

Add the GFX9 golden settings.

v2: squash in updates

Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add module firmware for raven

Fetch correct firmware for raven for gfx and sdma.

Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add Raven chip id case for ucode

Set the appropriate ucode loading mechanism.  Set to
direct for now.

Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable soc15 clock gating flags for raven

Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/soc15: add clock gating functions for raven

Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: fill in raven case in soc15 early init

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/soc15: add Raven golden setting

Add the common golden settings for Raven.

Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add Raven ip blocks (v2)

Add the IP blocks for RAVEN.

v2: drop DC for upstream (Alex)

Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add RAVEN family id definition

RAVEN is a new APU.

Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add register headers for VCN 1.0

Add registers for Video Controller Next 1.0

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add register headers for THM 10.0

Add registers for THerMal control 10.0

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add register headers for SDMA 4.1

Add registers for SDMA 4.1

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add register headers for NBIO 7.0

Add registers for NBIO 7.0

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add register headers for MP 10.0

Add registers for MP 10.0

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add register headers for MMHUB 9.1

Add registers for the MultiMedia Hub 9.1

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add register headers for GC 9.1

Registers for Graphics Controller 9.1

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add register headers for DCN 1.0

Registers for Display Controller Next 1.0

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:use job's list instead of check fence

because if the fence is really signaled, it could already
released so the fence pointer is a wild pointer, but if
we use job->base.node we are safe because job will not
be released untill amdgpu_job_timedout finished.

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/SRIOV:implement guilty job TDR for(V2)

1,TDR will kickout guilty job if it hang exceed the threshold
of the given one from kernel paramter "job_hang_limit", that
way a bad command stream will not infinitly cause GPU hang.

by default this threshold is 1 so a job will be kicked out
after it hang.

2,if a job timeout TDR routine will not reset all sched/ring,
instead if will only reset on the givn one which is indicated
by @job of amdgpu_sriov_gpu_reset, that way we don't need to
reset and recover each sched/ring if we already know which job
cause GPU hang.

3,unblock sriov_gpu_reset for AI family.

V2:
1:put kickout guilty job after sched parked.
2:since parking scheduler prior to kickout already occupies a
while, we can do last check on the in question job before
doing hw_reset.

TODO:
1:when a job is considered as guilty, we should mark some flag
in its fence status flag, and let UMD side aware that this
fence signaling is not due to job complete but job hang.

2:if gpu reset cause all video memory lost, we need introduce
a new policy to implement TDR, like drop all jobs not yet
signaled, and all IOCTL on this device will return ERROR
DEVICE_LOST.
this will be implemented later.

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:don't init entity for KIQ

We don't need a scheduler for KIQ.

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:only call flr_work under infinite timeout

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:use job* to replace voluntary

that way we can know which job cause hang and
can do per sched reset/recovery instead of all
sched.

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:don't invoke srio-gpu-reset in gpu-reset (v2)

because we don't want to do sriov-gpu-reset under certain
cases, so just split those two funtion and don't invoke
sr-iov one from bare-metal one.

V2:
remove debugfs_gpu_reset routine on SRIOV case.

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: id reset count only is updated when used end v2

before that, we have function to check if reset happens by using reset count.
v2: always update reset count after vm flush

Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: make pipeline sync be in same place v2

v2: directly return for 'if' case.

Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add sched sync for amdgpu job v2

this is an improvement for previous patch, the sched_sync is to store fence
that could be skipped as scheduled, when job is executed, we didn't need
pipeline_sync if all fences in sched_sync are signalled, otherwise insert
pipeline_sync still.

v2: handle error when adding fence to sync failed.

Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> (v1)
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove unsed amdgpu_gem_handle_lockup (v2)

This kind of reset handling was removed a long time ago.

v2: fix warning (Alex)

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: print when gpu reset successed

Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Roger.He <Hongbo.He@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix ring0 failed on pro card

the root cause is vram content is lost completely after pci reset.

Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Roger.He <Hongbo.He@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: extend lock range for race condition when gpu reset

to cover below case:
1. A task gart bind/unbind but not add to adev->gtt_list yet
2. at this time gpu reset, gtt only recover those gtt in adev->gtt_list

Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger.He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix comments in source code

Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix errors in comments.

Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx9: move define to header file

rather than defining it locally.

Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: get rid of else branch

else branch is pointless if it's right at the end of function and use
unlikely() on err path.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Nikola Pajkovsky <npajkovsky@suse.cz>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:cleanup flag not used

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:use FRAME_CNTL for new GFX ucode (v2)

AI affected:

CP/HW team requires KMD insert FRAME_CONTROL(end) after
the last IB and before the fence of this DMAframe.

this is to make sure the cache are flushed, and it's a must
change no matter MCBP/SR-IOV or bare-metal case because new
CP hw won't do the cache flush for each IB anymore, it just
leaves it to KMD now.

with this patch, certain MCBP hang issue when rendering
vulkan/chained-ib are resolved.

v2: drop gfx8 changes.  gfx8 is not affected (Alex)

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:new PM4 entry for VI/AI

TMZ package will be used for VULKAN/CHAINED-IB MCBP

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:change SR-IOV DMAframe scheme

According to CP/hw team requirment, to support PAL/CHAINED-IB
MCBP, kernel driver must guarantee DE_META must be inserted
right prior to the work_load DE IB (with PREEMPT flag), there
cannot be any non-work_load DE IB between-in DE_META and
work_load DE IB.

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:unify gfx8/9 ce/de meta_data

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:cleanup indent/format for gfx_v9_0.c

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: clean doorbell after sending init table to mmsch

According to HW design, need to clean doorbell after setup MMSCH
table.

Signed-off-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/virt: change AI ack-irq message to debug level

Change message to debug level as VI does.

Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/psp: Do not load asd for SRIOV

If psp version doesn't match asd version, asd loading will be
failed. Add workaround to bypass it for sriov.

Signed-off-by: Daniel Wang <Daniel.Wang2@amd.com>
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Bypass GMC/UVD/VCE hw_fini in SR-IOV

On vega10, some hw finish operations should not be applied in SR-IOV
case. This works as workaround to fix multi-VFs reboot/shutdown
issues.

Signed-off-by: Trigger Huang <trigger.huang@amd.com>
Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:re-write sriov_reinit_early/late (v2)

1,this way we make those routines compatible with the sequence
  requirment for both Tonga and Vega10
2,ignore PSP hw init when doing TDR, because for SR-IOV device
the ucode won't get lost after VF FLR, so no need to invoke PSP
doing the ucode reloading again.

v2: squash in ARRAY_SIZE fix

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:need som change on vega10 mailbox

if sriov gpu reset is invoked by job timeout, it is run
in a global work-queue which is very slow and better not call
msleep ortherwise it takes long time to get back CPU.

so make below changes:

1: Change msleep 1 to mdelay 5
2: Ignore the ack fail from pf after time out,
   because VF FLR will clear ack, sometime VF FLR is done
   prior to the beginning of poll_ack so we can ignore this ack

TODO:
Put job_timedout (and the following gpu reset) in a driver thread,
instead of the global work_struct.

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:fix cannot receive rcv/ack irq bug

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:kiq reg access need timeout(v2)

this is to prevent fence forever waiting if FLR occured
during register accessing.

v2:
use define instead of hardcode for the timeout msec

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx9: wait for completion in KIQ init

We need to make sure the various init sequences submitted
to KIQ complete before testing the rings.

Reviewed-by: monk liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx9: use new KIQ packet defines

Rather than magic numbers.

Reviewed-by: monk liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add KIQ packet defines to soc15d.h

Will be used in subsequent commits rather rather than
magic numbers.

Reviewed-by: monk liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx9: clear the compute ring on reset

To be consistent with gfx8.

Reviewed-by: monk liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx9: create mqd backups

And properly synchronize them with the master during
queue init.

Reviewed-by: monk liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Move kiq ring lock out of virt structure

The usage of kiq should not depend on the virtualization.

Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by:Andres Rodriquez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: bump module verion for reserved vmid

Interface to reserve a vmid for a specific process to
add in shader debugging that requries a fixed vmid.

Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: implement grab reserved vmid V4

Implement the vmid reservation.

v2: move sync waiting only when flush needs
v3: fix racy
v4: peek fence instead of get fence, and fix potential context starved.

Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add limitation for dedicated vm number v4

Limit reserved vmids to 1 to avoid taking too many
out of commission and starving the system.

v2: move #define to amdgpu_vm.h
v3: move reserved vmid counter to id_manager,
and increase counter before allocating vmid
v4: rename to reserved_vmid_num

Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: reserve/unreserve vmid by vm ioctl v4

add reserve/unreserve vmid funtions. Used to reserve
vmids for certain shader debugging functionality that
required a fixed vmid for the life of the debug.

v3:
only reserve vmid from gfxhub
v4:
fix racy condition

Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add reserved vmid field in vm struct v2

v2: rename dedicated_vmid to reserved_vmid

Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add vm ioctl

It will be used for reserving vmid for shader debugging
that requires a fixed vmid.

v2: fix warning (Alex)

Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Enable chained IB MCBP support

Support for MCBP/Virtualization in combination with chained IBs is
formal released on firmware feature version #46. So enable it
according to firmware feature version, otherwise, world switch will
hang.

Signed-off-by: Trigger Huang <trigger.huang@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:fix get wrong gfx always on cu masks.

Bug: SWDEV-117987: Always on CU mask broken for gfx7+

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix s3 ring test failed on Vi caused by KIQ enabled.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/virt: change the place of virt_init_setting

Change place of virt_init_setting function so that can cover the
cg and pg flags configuration.

Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/virt: bypass cg and pg setting for SRIOV

GPU hypervisor cover all settings of CG and PG, so guest doesn't
need to do anything. Bypass it.

Signed-off-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: drop support for per ASIC read registers

Only per family registers are still used.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: drop support for untouched registers

I couldn't figure out what this was original good for, but we
don't use it any more.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: delete redundant kiq irq funcs type check in gfx8.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix typo in dmesg in gfx_v8_0_kiq_kcq_disable.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add HDMI audio support for si dce6

Signed-off-by: Xiaojie Yuan <Xiaojie.Yuan@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add DP audio support for si dce6 (v3)

v2: refine dce_v6_0_audio_endpt_wreg() and unify inconsistent method names
v3: fix num_pins for tahiti, pitcairn, verde and oland

Signed-off-by: Xiaojie Yuan <Xiaojie.Yuan@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Junwei Zhang <Jerry.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx8: move CP_PQ_STATUS after doorbell range setting (v2)

I'm not sure if the order matters, but it seems like it makes
more sense to set this after the range is programmed.

v2: rebase (Alex)

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: set cpg doorbell for fiji and polaris.

add set_doorbell functions for mec and cpg.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx8: unify the HQD deactivation code

This could be used in Andres' priority scheduling patch
as well.

Reviewed-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx8: enable cp/rlc ints after we disable clockgating

Even if we disable clockgating, we still need to make sure the
cp/rlc interrupts are enabled for powergating which might still
be enabled.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx7: enable cp/rlc ints after we disable clockgating

Even if we disable clockgating, we still need to make sure the
cp/rlc interrupts are enabled for powergating which might still
be enabled.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx8: move MEC doorbell range setting

It's global, not queue specific, so move it out of the
kiq register init function.

Tested-and-Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx8: fix resume of KIQ and KCQs

No need to reset the wptr and clear the rings.  The UNMAP_QUEUES
packet writes the current MQD state back the MQD on suspend,
so there is no need to reset it as well.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx8: properly disable the KCQs in hw_fini

Use the UNMAP_QUEUES packet to have the KIQ properly
disable them.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx8: use new KIQ packet defines

Rather than open coding them.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx8: move SET_RESOURCES into the same command stream

As the KCQ setup.  This way we only have to wait once for the
entire MEC.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx8: wait once for all KCQs to be created

Rather than waiting for each queue.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: split gfx_v8_0_kiq_init_queue into two

One for KIQ and one for the KCQ. This simplifies the logic and
allows for future optimizations.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx8: wait for completion in KIQ init

We need to make sure the various init sequences submitted
to KIQ complete before testing the rings.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amd/amdgpu: Disable GFX_PG on Carrizo until compute issues solved"

Re-enable GFX PG.  It's working properly with MEC now that KIQ is
enabled.

Reviewed-by: Samuel Li <samuel.li@amd.com>
This reverts commit e9ef19aa1bdeac380662a112f1d03a7c3477527f.

drm/amdgpu: Switch baremetal to use KIQ for compute ring management. (v3)

KIQ is the Kernel Interface Queue for managing the MEC.  Rather than setting
up rings via direct MMIO of ring registers, the rings are configured via
special packets sent to the KIQ.  The allows the MEC to better manage shared
resources and certain power events.

v2: squash in s3/s4 fix from Rex
v3: further fixes from Rex

Signed-off-by: David Panariti <David.Panariti@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Tom St Denis <tom.stdenis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>