OSDN Git Service
Gerd Hoffmann [Wed, 17 Feb 2021 12:32:06 +0000 (13:32 +0100)]
drm/qxl: fix lockdep issue in qxl_alloc_release_reserved
Call qxl_bo_unpin (which does a reservation) without holding the
release_mutex lock. Fixes lockdep (correctly) warning on a possible
deadlock.
Fixes:
65ffea3c6e73 ("drm/qxl: unpin release objects")
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-5-kraxel@redhat.com
Gerd Hoffmann [Wed, 17 Feb 2021 12:32:05 +0000 (13:32 +0100)]
drm/qxl: use ttm bo priorities
Allow to set priorities for buffer objects. Use priority 1 for surface
and cursor command releases. Use priority 0 for drawing command
releases. That way the short-living drawing commands are first in line
when it comes to eviction, making it *much* less likely that
ttm_bo_mem_force_space() picks something which can't be evicted and
throws an error after waiting a while without success.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-4-kraxel@redhat.com
Gerd Hoffmann [Wed, 17 Feb 2021 12:32:04 +0000 (13:32 +0100)]
drm/qxl: more fence wait rework
Move qxl_io_notify_oom() call into wait condition.
That way the driver will call it again if one call
wasn't enough.
Also allows to remove the extra dma_fence_is_signaled()
check and the goto.
Fixes:
5a838e5d5825 ("drm/qxl: simplify qxl_fence_wait")
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-3-kraxel@redhat.com
Gerd Hoffmann [Wed, 17 Feb 2021 12:32:03 +0000 (13:32 +0100)]
drm/qxl: properly handle device init failures
Specifically do not try release resources which where
not allocated in the first place.
Cc: Tong Zhang <ztong0001@gmail.com>
Tested-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-2-kraxel@redhat.com
Dario Binacchi [Tue, 16 Feb 2021 20:22:25 +0000 (21:22 +0100)]
drm/tilcdc: fix raster control register setting
The fdd property of the tilcdc_panel_info structure must set the reqdly
bit field (bit 12 to 19) of the raster control register. The previous
statement set the least significant bit instead.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
Tested-by: Jyri Sarha <jyri.sarha@iki.fi>
Signed-off-by: Jyri Sarha <jyri.sarha@iki.fi>
Link: https://patchwork.freedesktop.org/patch/msgid/20210216202225.12861-1-dariobin@libero.it
Tian Tao [Mon, 8 Feb 2021 02:32:56 +0000 (10:32 +0800)]
drm/tilcdc: replace spin_lock_irqsave by spin_lock in hard IRQ
The code has been in a irq-disabled context since it is hard IRQ. There
is no necessity to do it again.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
Tested-by: Jyri Sarha <jyri.sarha@iki.fi>
Signed-off-by: Jyri Sarha <jyri.sarha@iki.fi>
Link: https://patchwork.freedesktop.org/patch/msgid/1612751576-42512-1-git-send-email-tiantao6@hisilicon.com
Imre Deak [Tue, 16 Feb 2021 12:34:48 +0000 (14:34 +0200)]
drm/dp_mst: Tune down the WARN modesetting a port with full_pbn=0
It's possible to modeset a connector/mst port that has a 0 full_pbn
value: if the sink on the port deasserts its HPD and a branch device
reports this via a CSN with the port's ddps=0 and pdt!=NONE the driver
clears full_pbn, but the corresponding connector can be still
modesetted.
This happened on a DELL U2719D monitor as the branch device and an LG
27UL650-W daisy-chained to it, the LG monitor generating a long HPD
pulse (doing this for some reason always when waking up from some power
saving state).
Tune down the WARN about this scenario to a debug message.
v2: Use the correct atomic debug message level. (Lyude)
References: https://gitlab.freedesktop.org/drm/intel/-/issues/1917
Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210216123448.410545-1-imre.deak@intel.com
Sebastian Andrzej Siewior [Mon, 8 Feb 2021 22:38:10 +0000 (23:38 +0100)]
video: fbdev: amba-clcd: Always use msleep() for waiting
The driver uses in_atomic() to distinguish between mdelay() and msleep().
The usage of in_interrupt() in drivers is phased out and Linus clearly
requested that code which changes behaviour depending on context should
either be separated or the context be conveyed in an argument passed by the
caller, which usually knows the context.
I traced the usage of in_interrupt() back to its initial merge:
bfe694f833643 ("[ARM] Add ARM AMBA CLCD framebuffer driver.")
https://git.kernel.org/history/history/c/
bfe694f833643
The driver has been removed and added back in the meantime.
I've been looking for the IRQ context as described in the comment and
couldn't find it. The functions calling clcdfb_sleep() also call
conditionally backlight_update_status() which acquires a mutex. If it is
okay to acquire a mutex then it is okay to use msleep() since both
functions must be used in preemptible context.
Replace clcdfb_sleep() with msleep().
Cc: Peter Collingbourne <pcc@google.com>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208223810.388502-4-bigeasy@linutronix.de
Ahmed S. Darwish [Mon, 8 Feb 2021 22:38:09 +0000 (23:38 +0100)]
video: omapfb: Remove WARN_ON(in_interrupt()).
dsi_sync_vc() uses in_interrupt() to create a warning if the function is
used in non-preemptible context.
The usage of in_interrupt() in drivers is phased out and Linus clearly
requested that code which changes behaviour depending on context should
either be separated or the context be conveyed in an argument passed by the
caller, which usually knows the context.
The wait_for_completion() function (used in dsi_sync_vc_vp() and
dsi_sync_vc_l4() has already a check if it is invoked from proper
context.
Remove WARN_ON(in_interrupt()) from the driver.
Cc: linux-omap@vger.kernel.org
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208223810.388502-3-bigeasy@linutronix.de
Ahmed S. Darwish [Mon, 8 Feb 2021 22:38:08 +0000 (23:38 +0100)]
video: omap: Remove in_interrupt() usage.
alloc_req() uses in_interrupt() to detect if it is safe to use down().
The usage of in_interrupt() in drivers is phased out and Linus clearly
requested that code which changes behaviour depending on context should
either be separated or the context be conveyed in an argument passed by the
caller, which usually knows the context.
The semaphore is used as a counting semaphore, initialized with the
number of slots in the request pool minus IRQ_REQ_POOL_SIZE - which are
reserved for the in_interrupt() user to ensure that a request is always
available. The preemptible user will block on the semphore waiting for a
request to become available in case there are no requests available.
Replace in_interrupt() with a `can_sleep' argument to indicate if it is
safe to block on the sempahore.
Cc: linux-omap@vger.kernel.org
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208223810.388502-2-bigeasy@linutronix.de
Sakari Ailus [Tue, 16 Feb 2021 15:57:22 +0000 (17:57 +0200)]
drm: Switch to %p4cc format modifier
Switch DRM drivers from drm_get_format_name() to %p4cc. This gets rid of a
large number of temporary variables at the same time.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210216155723.17109-4-sakari.ailus@linux.intel.com
Sakari Ailus [Tue, 16 Feb 2021 15:57:21 +0000 (17:57 +0200)]
v4l: ioctl: Use %p4cc printk modifier to print FourCC codes
Now that we can print FourCC codes directly using printk, make use of the
feature in V4L2 core.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210216155723.17109-3-sakari.ailus@linux.intel.com
Sakari Ailus [Tue, 16 Feb 2021 15:57:20 +0000 (17:57 +0200)]
lib/vsprintf: Add support for printing V4L2 and DRM fourccs
Add a printk modifier %p4cc (for pixel format) for printing V4L2 and DRM
pixel formats denoted by fourccs. The fourcc encoding is the same for both
so the same implementation can be used.
Suggested-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210216155723.17109-2-sakari.ailus@linux.intel.com
Thomas Zimmermann [Tue, 9 Feb 2021 13:46:32 +0000 (14:46 +0100)]
drm/ast: Move all of the cursor-update functionality to atomic_update
We used to update the cursor image in prepare_fb. Move all this code to
atomic_update (where it belongs). The generic helper for shadow-buffered
planes now implement the cursor plane's prepare_fb.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-11-tzimmermann@suse.de
Thomas Zimmermann [Tue, 9 Feb 2021 13:46:31 +0000 (14:46 +0100)]
drm/ast: Store each HW cursor offset after pinning the rsp BO
As HW cursor BOs never move, we can store the offset in VRAM in the
cursor-plane's HWC state. This removes the last possible source of
runtime errors from atomic_update.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-10-tzimmermann@suse.de
Thomas Zimmermann [Tue, 9 Feb 2021 13:46:30 +0000 (14:46 +0100)]
drm/ast: Map HW cursor BOs permanently
The BOs of the hardware cursor are now mapped permanently while the
cursor plane is being used. This reduces the CPU overhead of the cursor
plane's atomic_update function.
The change also resolves a problem with the vmap call in the commit tail.
The vmap implementation could acquire the DMA reservation lock on the
BO, which is not allowed that late in the atomic update. Removing the
vmap call from atomic_update fixes the issue.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-9-tzimmermann@suse.de
Thomas Zimmermann [Tue, 9 Feb 2021 13:46:29 +0000 (14:46 +0100)]
drm/ast: Store cursor BOs in cursor plane
The cursor uses two BOs in video RAM to implement double buffering. Store
both in struct ast_cursor_plane.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-8-tzimmermann@suse.de
Thomas Zimmermann [Tue, 9 Feb 2021 13:46:28 +0000 (14:46 +0100)]
drm/ast: Add cursor-plane data structure
Cursor state is currently located throughout struct ast_private. Having
struct ast_cursor_plane as dedicated data structure for cursors helps to
organize the modesetting code.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-7-tzimmermann@suse.de
Thomas Zimmermann [Tue, 9 Feb 2021 13:46:27 +0000 (14:46 +0100)]
drm/ast: Inline ast cursor-update functions into modesetting code
The logic for cursor updates is now located in the cursor plane's
modesetting code. A number of helper functions remain to modify the
rsp registers and image.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-6-tzimmermann@suse.de
Thomas Zimmermann [Tue, 9 Feb 2021 13:46:26 +0000 (14:46 +0100)]
drm/ast: Allocate HW cursor BOs during cursor-plane initialization
The BOs are eventually released by the cursor plane's destroy callback.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-5-tzimmermann@suse.de
Thomas Zimmermann [Tue, 9 Feb 2021 13:46:25 +0000 (14:46 +0100)]
drm/ast: Initialize planes in helper functions
This change will help with inlining cursor functions into modesetting
code. The primary plane's field used to be cleared with memset(). This
has been dropped as the memory is always allocated with kzalloc().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-4-tzimmermann@suse.de
Thomas Zimmermann [Tue, 9 Feb 2021 13:46:24 +0000 (14:46 +0100)]
drm/ast: Fix invalid usage of AST_MAX_HWC_WIDTH in cursor atomic_check
Use AST_MAX_HWC_HEIGHT for setting offset_y in the cursor plane's
atomic_check. The code used AST_MAX_HWC_WIDTH instead. This worked
because both constants has the same value.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-3-tzimmermann@suse.de
Thomas Zimmermann [Tue, 9 Feb 2021 13:46:23 +0000 (14:46 +0100)]
drm/ast: Add constants for VGACRCB register bits
Set the bits in VGACRCB with constants. Alo move the rsp code into a
helper function.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-2-tzimmermann@suse.de
Marek Vasut [Wed, 27 Jan 2021 11:07:56 +0000 (12:07 +0100)]
drm/stm: Fix bus_flags handling
The drm_display_mode_to_videomode() does not populate DISPLAY_FLAGS_DE_LOW
or DISPLAY_FLAGS_PIXDATA_NEGEDGE flags in struct videomode. Therefore, no
matter what polarity the next bridge or display might require, these flags
are never set, and thus the LTDC GCR_DEPOL and GCR_PCPOL bits are never set
and the LTDC behaves as if both DISPLAY_FLAGS_PIXDATA_POSEDGE and
DISPLAY_FLAGS_DE_HIGH were always set.
The fix for this problem is taken almost verbatim from MXSFB driver. In
case there is a bridge attached to the LTDC, the bridge might have extra
polarity requirements, so extract bus_flags from the bridge and use them
for LTDC configuration. Otherwise, extract bus_flags from the connector,
which is the display.
Fixes:
b759012c5fa7 ("drm/stm: Add STM32 LTDC driver")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Antonio Borneo <antonio.borneo@st.com>
Cc: Benjamin Gaignard <benjamin.gaignard@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Yannick Fertre <yannick.fertre@st.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
To: dri-devel@lists.freedesktop.org
Tested-by: Yannick Fertre <yannick.fertre@foss.st.com>
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210127110756.125570-1-marex@denx.de
Boris Brezillon [Fri, 5 Feb 2021 11:17:57 +0000 (12:17 +0100)]
drm/panfrost: Stay in the threaded MMU IRQ handler until we've handled all IRQs
Doing a hw-irq -> threaded-irq round-trip is counter-productive, stay
in the threaded irq handler as long as we can.
v2:
* Rework the loop to avoid a goto
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210205111757.585248-4-boris.brezillon@collabora.com
Boris Brezillon [Fri, 5 Feb 2021 11:17:56 +0000 (12:17 +0100)]
drm/panfrost: Don't try to map pages that are already mapped
We allocate 2MB chunks at a time, so it might appear that a page fault
has already been handled by a previous page fault when we reach
panfrost_mmu_map_fault_addr(). Bail out in that case to avoid mapping the
same area twice.
Cc: <stable@vger.kernel.org>
Fixes:
187d2929206e ("drm/panfrost: Add support for GPU heap allocations")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210205111757.585248-3-boris.brezillon@collabora.com
Boris Brezillon [Fri, 5 Feb 2021 11:17:55 +0000 (12:17 +0100)]
drm/panfrost: Clear MMU irqs before handling the fault
When a fault is handled it will unblock the GPU which will continue
executing its shader and might fault almost immediately on a different
page. If we clear interrupts after handling the fault we might miss new
faults, so clear them before.
Cc: <stable@vger.kernel.org>
Fixes:
187d2929206e ("drm/panfrost: Add support for GPU heap allocations")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210205111757.585248-2-boris.brezillon@collabora.com
Christian König [Thu, 11 Feb 2021 10:04:23 +0000 (11:04 +0100)]
drm/vram-helper: cleanup drm_gem_vram_bo_driver_move_notify
Swapping bo->mem was completely unecessary. Cleanup the function which
is just a leftover from a TTM cleanup.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210211131659.276275-1-christian.koenig@amd.com
Zack Rusin [Mon, 8 Feb 2021 20:43:49 +0000 (15:43 -0500)]
drm/vmwgfx: Remove pointless code
There's no need to check for the presence of the hotplug
property just to return because this is the end of the function
so we're returning either way.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209161700.335611-2-zackr@vmware.com
Zack Rusin [Mon, 8 Feb 2021 19:48:44 +0000 (14:48 -0500)]
drm/vmwgfx: Correctly set the name of the preferred mode
Our sysfs "modes" entries were broken because our preffered mode
never had its name set correctly. This resulted in the first
entry simply being called "preferred" followed by a list of
other resolutions. Lets fix it by actually setting the name of
mode (which is its resolution). This allows one to quickly
validate the modes set by the open-vm-tools.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209161700.335611-1-zackr@vmware.com
Roland Scheidegger [Fri, 5 Feb 2021 01:04:46 +0000 (02:04 +0100)]
drm/vmwgfx: add some 16:9 / 16:10 default resolutions
The default list was old and in particular lacking all common 16:9
resolutions, as well as some newer 16:10 ones.
This makes them selectable in resolution change lists, which can be
quite useful (for instance in case auto-fit isn't enabled).
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210205010446.26559-1-sroland@vmware.com
Julia Lawall [Tue, 9 Feb 2021 21:13:04 +0000 (22:13 +0100)]
drm: use getter/setter functions
Use getter and setter functions, for platform_device structures and a
mipi_dsi_device structure.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209211304.1261740-1-Julia.Lawall@inria.fr
Daniel Vetter [Tue, 9 Feb 2021 10:15:23 +0000 (11:15 +0100)]
drm/vblank: Document drm_crtc_vblank_restore constraints
I got real badly confused when trying to review a fix from Ville for
this. Let's try to document better what's required for this, and check
the minimal settings at runtime - we can't check ofc that there's
indeed no races in the driver callback.
Also noticed that the drm_vblank_restore version is unused, so lets
unexport that while at it.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209101523.2954281-1-daniel.vetter@ffwll.ch
Roman Stratiienko [Thu, 28 Jan 2021 11:39:40 +0000 (13:39 +0200)]
drm/sun4i: Add alpha property for sun8i and sun50i VI layer
DE3.0 VI layers supports plane-global alpha channel.
DE2.0 FCC block have GLOBAL_ALPHA register that can be used as alpha source
for blender.
Add alpha property to the DRM plane and connect it to the
corresponding registers in the mixer.
Do not add alpha property for V3s SOC that have DE2.0 and 2 VI planes.
Signed-off-by: Roman Stratiienko <r.stratiienko@gmail.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128113940.347013-3-r.stratiienko@gmail.com
Roman Stratiienko [Thu, 28 Jan 2021 11:39:39 +0000 (13:39 +0200)]
drm/sun4i: Add alpha property for sun8i UI layer
DE2.0 and DE3.0 UI layers supports plane-global alpha channel.
Add alpha property to the DRM plane and connect it to the
corresponding registers in mixer.
Signed-off-by: Roman Stratiienko <r.stratiienko@gmail.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128113940.347013-2-r.stratiienko@gmail.com
Joel Stanley [Tue, 9 Feb 2021 12:37:34 +0000 (23:07 +1030)]
drm/aspeed: Use dt matching for default register values
There are minor differences in the values for the threshold value and
the scan line size between families of ASPEED SoC. Additionally the SCU
registers for the output control and scratch registers differ between
families.
This adds device tree matching to parameterise these values, allowing us
to add support for the AST2400 now, and in the future the AST2600.
Reviewed-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209123734.130483-3-joel@jms.id.au
Joel Stanley [Tue, 9 Feb 2021 12:37:33 +0000 (23:07 +1030)]
drm/aspeed: Look up syscon by phandle
This scales better to multiple families of SoC. The lookup by compatible
can be removed in a future change.
The fallback path is for the ast2500 platform only. Other platforms will
be added with the new style, so they won't need fallback paths.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209123734.130483-2-joel@jms.id.au
Quanyang Wang [Tue, 9 Feb 2021 08:24:15 +0000 (16:24 +0800)]
drm/tilcdc: send vblank event when disabling crtc
When run xrandr to change resolution on Beaglebone Black board, it will
print the error information:
root@beaglebone:~# xrandr -display :0 --output HDMI-1 --mode 720x400
[drm:drm_crtc_commit_wait] *ERROR* flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CRTC:32:tilcdc crtc] commit wait timed out
[drm:drm_crtc_commit_wait] *ERROR* flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CONNECTOR:34:HDMI-A-1] commit wait timed out
[drm:drm_crtc_commit_wait] *ERROR* flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [PLANE:31:plane-0] commit wait timed out
tilcdc
4830e000.lcdc: already pending page flip!
This is because there is operation sequence as below:
drm_atomic_connector_commit_dpms(mode is DRM_MODE_DPMS_OFF):
...
drm_atomic_helper_setup_commit <- init_completion(commit_A->flip_done)
drm_atomic_helper_commit_tail
tilcdc_crtc_atomic_disable
tilcdc_plane_atomic_update <- drm_crtc_send_vblank_event in tilcdc_crtc_irq
is skipped since tilcdc_crtc->enabled is 0
tilcdc_crtc_atomic_flush <- drm_crtc_send_vblank_event is skipped since
crtc->state->event is set to be NULL in
tilcdc_plane_atomic_update
drm_mode_setcrtc:
...
drm_atomic_helper_setup_commit <- init_completion(commit_B->flip_done)
drm_atomic_helper_wait_for_dependencies
drm_crtc_commit_wait <- wait for commit_A->flip_done completing
Just as shown above, the steps which could complete commit_A->flip_done
are all skipped and commit_A->flip_done will never be completed. This will
result a time-out ERROR when drm_crtc_commit_wait check the commit_A->flip_done.
So add drm_crtc_send_vblank_event in tilcdc_crtc_atomic_disable to
complete commit_A->flip_done.
Fixes:
cb345decb4d2 ("drm/tilcdc: Use standard drm_atomic_helper_commit")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
Tested-by: Jyri Sarha <jyri.sarha@iki.fi>
Signed-off-by: Jyri Sarha <jyri.sarha@iki.fi>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209082415.382602-1-quanyang.wang@windriver.com
Christian König [Fri, 18 Dec 2020 18:55:08 +0000 (19:55 +0100)]
drm/ttm: drop sysfs directory
Not used any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208133226.36955-3-christian.koenig@amd.com
Christian König [Tue, 17 Nov 2020 12:52:28 +0000 (13:52 +0100)]
drm/ttm: move memory accounting into vmwgfx v4
This is just another feature which is only used by VMWGFX, so move
it into the driver instead.
I've tried to add the accounting sysfs file to the kobject of the drm
minor, but I'm not 100% sure if this works as expected.
v2: fix typo in KFD and avoid 64bit divide
v3: fix init order in VMWGFX
v4: use pdev sysfs reference instead of drm
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Zack Rusin <zackr@vmware.com> (v3)
Tested-by: Nirmoy Das <nirmoy.das@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208133226.36955-2-christian.koenig@amd.com
Christian König [Mon, 16 Nov 2020 12:47:11 +0000 (13:47 +0100)]
drm/ttm: rework ttm_tt page limit v4
TTM implements a rather extensive accounting of allocated memory.
There are two reasons for this:
1. It tries to block userspace allocating a huge number of very small
BOs without accounting for the kmalloced memory.
2. Make sure we don't over allocate and run into an OOM situation
during swapout while trying to handle the memory shortage.
This is only partially a good idea. First of all it is perfectly
valid for an application to use all of system memory, limiting it to
50% is not really acceptable.
What we need to take care of is that the application is held
accountable for the memory it allocated. This is what control
mechanisms like memcg and the normal Linux page accounting already do.
Making sure that we don't run into an OOM situation while trying to
cope with a memory shortage is still a good idea, but this is also
not very well implemented since it means another opportunity of
recursion from the driver back into TTM.
So start to rework all of this by implementing a shrinker callback which
allows for TT object to be swapped out if necessary.
v2: Switch from limit to shrinker callback.
v3: fix gfp mask handling, use atomic for swapable_pages, add debugfs
v4: drop the extra gfp_mask checks
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208133226.36955-1-christian.koenig@amd.com
Christian König [Tue, 9 Feb 2021 13:15:53 +0000 (14:15 +0100)]
drm/ttm: fix removal of bo_count sysfs file
Only a zombie leftover from rebasing.
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes:
3763d635deaa ("drm/ttm: add debugfs directory v2")
Reported-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209131756.24650-1-christian.koenig@amd.com
Thomas Zimmermann [Tue, 9 Feb 2021 12:10:42 +0000 (13:10 +0100)]
drm/vboxvideo: Implement cursor plane with struct drm_shadow_plane_state
Functions in the atomic commit tail are not allowed to acquire the
dmabuf's reservation lock. So we cannot legally call the GEM object's
vmap functionality in atomic_update.
Instead use struct drm_shadow_plane_state and friends. It vmaps the
framebuffer BOs in prepare_fb and vunmaps them in cleanup_fb. The
cursor plane state stores the mapping's address. The pinning of the
BO is implicitly done by vmap.
As an extra benefit, there's no source of runtime errors left in
atomic_update.
v2:
* rebase patch onto struct drm_shadow_plane_state
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209121042.24098-3-tzimmermann@suse.de
Thomas Zimmermann [Tue, 9 Feb 2021 12:10:41 +0000 (13:10 +0100)]
drm/gem: Export helpers for shadow-buffered planes
Export the helpers for shadow-buffered planes. These will be used by
several drivers.
v3:
* fix documentation typos and formatting (Daniel)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209121042.24098-2-tzimmermann@suse.de
Patrik Jakobsson [Mon, 1 Feb 2021 13:26:17 +0000 (14:26 +0100)]
drm/gma500: Never wait for blits
Blits cannot happen anymore since we removed the 2d accel code. Stop
checking for a busy blitter and remove the remaining blitter code.
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210201132617.1233-6-patrik.r.jakobsson@gmail.com
Patrik Jakobsson [Mon, 1 Feb 2021 13:26:16 +0000 (14:26 +0100)]
drm/gma500: psb_spank() doesn't need it's own file
Since everything else in accel_2d.c got removed we can move psb_spank()
into psb_drv.c where it is used.
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210201132617.1233-5-patrik.r.jakobsson@gmail.com
Patrik Jakobsson [Mon, 1 Feb 2021 13:26:15 +0000 (14:26 +0100)]
drm/gma500: Unify crtc helpers
CDV crtc helpers are identical to other chips so use gma_ prefix for the
crtc helper struct and remove the CDV copy.
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210201132617.1233-4-patrik.r.jakobsson@gmail.com
Patrik Jakobsson [Mon, 1 Feb 2021 13:26:14 +0000 (14:26 +0100)]
drm/gma500/cdv: Remove unused tv out paths
Afaik tv out is not available on Cedarview and the code isn't doing
anything so remove it.
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210201132617.1233-3-patrik.r.jakobsson@gmail.com
Patrik Jakobsson [Mon, 1 Feb 2021 13:26:13 +0000 (14:26 +0100)]
drm/gma500: Remove unused DPST support
DPST never got enabled so remove it. We keep the reg save/restore code
just for safety.
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210201132617.1233-2-patrik.r.jakobsson@gmail.com
Patrik Jakobsson [Mon, 1 Feb 2021 13:26:12 +0000 (14:26 +0100)]
drm/gma500/cdv: Remove unused code for crt init
Clearly never been used so just remove it.
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210201132617.1233-1-patrik.r.jakobsson@gmail.com
Thomas Zimmermann [Tue, 9 Feb 2021 11:27:21 +0000 (12:27 +0100)]
drm/gma500: Drop DRM_GMA600 config option
With support for the MID-only Medfield chips removed, simply build
the complete driver if DRM_GMA500 has been selected. Anyone who wants
to enable one of the chips would probably also want the rest.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes:
837f23bb4b60 ("drm/gma500: Drop DRM_GMA3600 config option")
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209112721.3421-1-tzimmermann@suse.de
Sebastian Andrzej Siewior [Mon, 8 Feb 2021 23:31:16 +0000 (00:31 +0100)]
drm/gma500: Remove in_atomic() usage.
The driver is using msleep() if it is safe to use based on in_atomic().
This is not needed this macro is only used from
i2c_algorithm::master_xfer() which is always invoked from preemptible
context.
Remove in_atomic() because it is superfluous. Remove wait_for_atomic()
because it has no users.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208233119.391103-2-bigeasy@linutronix.de
Thomas Zimmermann [Mon, 8 Feb 2021 11:55:38 +0000 (12:55 +0100)]
drm/udl: Move vmap out of commit tail
Vmap operations may acquire the dmabuf reservation lock, which is not
allowed within atomic commit-tail functions. Therefore move vmap and
vunmap from the damage handler into prepare_fb and cleanup_fb callbacks.
The mapping is provided as GEM shadow-buffered plane. The functions in
the commit tail use the pre-established mapping for damage handling.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208115538.6430-8-tzimmermann@suse.de
Thomas Zimmermann [Mon, 8 Feb 2021 11:55:37 +0000 (12:55 +0100)]
drm/gm12u320: Move vmap out of commit tail
Vmap operations may acquire the dmabuf reservation lock, which is not
allowed within atomic commit-tail functions. Therefore move vmap and
vunmap from the damage handler into prepare_fb and cleanup_fb callbacks.
The mapping is provided as GEM shadow-buffered plane. The functions in
the commit tail use the pre-established mapping for damage handling.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208115538.6430-7-tzimmermann@suse.de
Thomas Zimmermann [Mon, 8 Feb 2021 11:55:36 +0000 (12:55 +0100)]
drm/cirrus: Move vmap out of commit tail
Vmap operations may acquire the dmabuf reservation lock, which is not
allowed within atomic commit-tail functions. Therefore move vmap and
vunmap from the damage handler into prepare_fb and cleanup_fb callbacks.
The mapping is provided as GEM shadow-buffered plane. The functions in
the commit tail use the pre-established mapping for damage handling.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208115538.6430-6-tzimmermann@suse.de
Thomas Zimmermann [Mon, 8 Feb 2021 11:55:35 +0000 (12:55 +0100)]
drm/mgag200: Move vmap out of commit tail
Vmap operations may acquire the dmabuf reservation lock, which is not
allowed within atomic commit-tail functions. Therefore move vmap and
vunmap from the damage handler into prepare_fb and cleanup_fb callbacks.
The mapping is provided as GEM shadow-buffered plane. The functions in
the commit tail use the pre-established mapping for damage handling.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208115538.6430-5-tzimmermann@suse.de
Thomas Zimmermann [Mon, 8 Feb 2021 11:55:34 +0000 (12:55 +0100)]
drm: Add additional atomic helpers for shadow-buffered planes
Several drivers use GEM buffer objects as shadow buffers for the actual
framebuffer memory. Right now, drivers do these vmap operations in their
commit tail, which is actually not allowed by the locking rules for
the dma-buf reservation lock. The involved BO has to be vmapped in the
plane's prepare_fb callback and vunmapped in cleanup_fb.
This patch introduces atomic helpers for such shadow planes. Plane
functions manage the plane state for shadow planes. The provided
implementations for prepare_fb and cleanup_fb vmap and vunmap all BOs of
struct drm_plane_state.fb. The mappings are afterwards available in the
plane's commit-tail functions.
For now, all rsp drivers use the simple KMS helpers, so we add the plane
callbacks and wrappers for simple KMS. The internal plane functions can
later be exported as needed.
v3:
* documentation fixes
v2:
* make duplicate_state interface compatible with
struct drm_plane_funcs
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208115538.6430-4-tzimmermann@suse.de
Thomas Zimmermann [Mon, 8 Feb 2021 11:55:33 +0000 (12:55 +0100)]
drm/gem: Export drm_gem_vmap() and drm_gem_vunmap()
The symbols will be required by the upcoming helpers for shadow-buffered
planes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208115538.6430-3-tzimmermann@suse.de
Thomas Zimmermann [Mon, 8 Feb 2021 11:55:32 +0000 (12:55 +0100)]
drm/simple-kms: Add plane-state helpers
Just like regular plane-state helpers, drivers can use these new
callbacks to create and destroy private plane state.
v2:
* make duplicate_state interface compatible with
struct drm_plane_funcs
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208115538.6430-2-tzimmermann@suse.de
Christian Hewitt [Wed, 27 Jan 2021 19:40:47 +0000 (19:40 +0000)]
drm/lima: add governor data with pre-defined thresholds
This patch adapts the panfrost pre-defined thresholds change [0] to the
lima driver to improve real-world performance. The upthreshold value has
been set to ramp GPU frequency to max freq faster (compared to panfrost)
to compensate for the lower overall performance of utgard devices.
[0] https://patchwork.kernel.org/project/dri-devel/patch/
20210121170445.19761-1-lukasz.luba@arm.com/
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210127194047.21462-1-christianshewitt@gmail.com
Lukasz Luba [Wed, 27 Jan 2021 10:51:21 +0000 (10:51 +0000)]
drm/lima: Use delayed timer as default in devfreq profile
Devfreq framework supports 2 modes for monitoring devices.
Use delayed timer as default instead of deferrable timer
in order to monitor the GPU status regardless of CPU idle.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210127105121.20345-1-lukasz.luba@arm.com
Colin Ian King [Thu, 4 Feb 2021 19:11:56 +0000 (19:11 +0000)]
drm/mgag200: make a const array static, makes object smaller
Don't populate the const array m_div_val on the stack but instead make
it static. Makes the object code smaller by 29 bytes:
Before:
text data bss dec hex filename
34736 4552 0 39288 9978 drivers/gpu/drm/mgag200/mgag200_mode.o
After:
text data bss dec hex filename
34625 4616 0 39241 9949 drivers/gpu/drm/mgag200/mgag200_mode.o
(gcc version 10.2.0)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210204191156.110778-1-colin.king@canonical.com
Christian König [Tue, 2 Feb 2021 11:40:01 +0000 (12:40 +0100)]
drm/scheduler: provide scheduler score externally
Allow multiple schedulers to share the load balancing score.
This is useful when one engine has different hw rings.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-Tested-by: Leo Liu <leo.liu@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210204144405.2737-1-christian.koenig@amd.com
Gerd Hoffmann [Thu, 4 Feb 2021 14:57:11 +0000 (15:57 +0100)]
drm/qxl: allocate dumb buffers in ram
dumb buffers are shadowed anyway, so there is no need to store them
in device memory. Use QXL_GEM_DOMAIN_CPU (TTM_PL_SYSTEM) instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210204145712.1531203-11-kraxel@redhat.com
Gerd Hoffmann [Thu, 4 Feb 2021 14:57:10 +0000 (15:57 +0100)]
drm/qxl: simplify qxl_fence_wait
Now that we have the new release_event wait queue we can just
use that in qxl_fence_wait() and simplify the code a lot.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210204145712.1531203-10-kraxel@redhat.com
Gerd Hoffmann [Thu, 4 Feb 2021 14:57:09 +0000 (15:57 +0100)]
drm/qxl: properly free qxl releases
Reorganize qxl_device_fini() a bit.
Add missing unpin() calls.
Count releases. Add wait queue for releases. That way
qxl_device_fini() can easily wait until everything is
ready for proper shutdown.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210204145712.1531203-9-kraxel@redhat.com
Gerd Hoffmann [Thu, 4 Feb 2021 14:57:08 +0000 (15:57 +0100)]
drm/qxl: handle shadow in primary destroy
qxl_primary_atomic_disable must check whenever the framebuffer bo has a
shadow surface and in case it has check the shadow primary status.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210204145712.1531203-8-kraxel@redhat.com
Gerd Hoffmann [Thu, 4 Feb 2021 14:57:07 +0000 (15:57 +0100)]
drm/qxl: properly pin/unpin shadow
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210204145712.1531203-7-kraxel@redhat.com
Gerd Hoffmann [Thu, 4 Feb 2021 14:57:06 +0000 (15:57 +0100)]
drm/qxl: release shadow on shutdown
In case we have a shadow surface on shutdown release
it so it doesn't leak.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210204145712.1531203-6-kraxel@redhat.com
Gerd Hoffmann [Thu, 4 Feb 2021 14:57:05 +0000 (15:57 +0100)]
drm/qxl: unpin release objects
Balances the qxl_create_bo(..., pinned=true, ...);
call in qxl_release_bo_alloc().
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210204145712.1531203-5-kraxel@redhat.com
Gerd Hoffmann [Thu, 4 Feb 2021 14:57:04 +0000 (15:57 +0100)]
drm/qxl: use drmm_mode_config_init
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210204145712.1531203-4-kraxel@redhat.com
Gerd Hoffmann [Thu, 4 Feb 2021 14:57:03 +0000 (15:57 +0100)]
Revert "drm/qxl: do not run release if qxl failed to init"
This reverts commit
b91907a6241193465ca92e357adf16822242296d.
Patch is broken, it effectively makes qxl_drm_release() a nop
because on normal driver shutdown qxl_drm_release() is called
*after* drm_dev_unregister().
Fixes:
b91907a62411 ("drm/qxl: do not run release if qxl failed to init")
Cc: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210204145712.1531203-3-kraxel@redhat.com
Imre Deak [Mon, 1 Feb 2021 12:01:45 +0000 (14:01 +0200)]
drm/dp_mst: Use DP_MST_LOGICAL_PORT_0 instead of magic number
Use the macro defined for the first logical port instead of the
corresponding magic number.
Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210201120145.350258-4-imre.deak@intel.com
Imre Deak [Mon, 1 Feb 2021 12:01:44 +0000 (14:01 +0200)]
drm/dp_mst: Remove redundant tile property setting
drm_get_edid() already updates the tile property since
commit
2de3a078497b ("drm/dp: Set the connector's TILE property even for DP SST connectors")
so no need to update it after calling this function.
Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210201120145.350258-3-imre.deak@intel.com
Imre Deak [Mon, 1 Feb 2021 12:01:43 +0000 (14:01 +0200)]
drm/dp_mst: Don't cache EDIDs for physical ports
Caching EDIDs for physical ports prevents updating the EDID if a port
gets reconnected via a Connection Status Notification message, fix this.
Fixes:
db1a07956968 ("drm/dp_mst: Handle SST-only branch device case")
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210201120145.350258-2-imre.deak@intel.com
Tong Zhang [Wed, 3 Feb 2021 04:07:27 +0000 (23:07 -0500)]
drm/qxl: do not run release if qxl failed to init
if qxl_device_init() fail, drm device will not be registered,
in this case, do not run qxl_drm_release()
[ 5.258534] ==================================================================
[ 5.258931] BUG: KASAN: user-memory-access in qxl_destroy_monitors_object+0x42/0xa0 [qxl]
[ 5.259388] Write of size 8 at addr
00000000000014dc by task modprobe/95
[ 5.259754]
[ 5.259842] CPU: 0 PID: 95 Comm: modprobe Not tainted
5.11.0-rc6-00007-g88bb507a74ea #62
[ 5.260309] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.13.0-48-gd9c812dda54
[ 5.260917] Call Trace:
[ 5.261056] dump_stack+0x7d/0xa3
[ 5.261245] kasan_report.cold+0x10c/0x10e
[ 5.261475] ? qxl_destroy_monitors_object+0x42/0xa0 [qxl]
[ 5.261789] check_memory_region+0x17c/0x1e0
[ 5.262029] qxl_destroy_monitors_object+0x42/0xa0 [qxl]
[ 5.262332] qxl_modeset_fini+0x9/0x20 [qxl]
[ 5.262595] qxl_drm_release+0x22/0x30 [qxl]
[ 5.262841] drm_dev_release+0x32/0x50
[ 5.263047] release_nodes+0x39e/0x410
[ 5.263253] ? devres_release+0x40/0x40
[ 5.263462] really_probe+0x2ea/0x420
[ 5.263664] driver_probe_device+0x6d/0xd0
[ 5.263888] device_driver_attach+0x82/0x90
[ 5.264116] ? device_driver_attach+0x90/0x90
[ 5.264353] __driver_attach+0x60/0x100
[ 5.264563] ? device_driver_attach+0x90/0x90
[ 5.264801] bus_for_each_dev+0xe1/0x140
[ 5.265014] ? subsys_dev_iter_exit+0x10/0x10
[ 5.265251] ? klist_node_init+0x61/0x80
[ 5.265464] bus_add_driver+0x254/0x2a0
[ 5.265673] driver_register+0xd3/0x150
[ 5.265882] ? 0xffffffffc0048000
[ 5.266064] do_one_initcall+0x84/0x250
[ 5.266274] ? trace_event_raw_event_initcall_finish+0x150/0x150
[ 5.266596] ? unpoison_range+0xf/0x30
[ 5.266801] ? ____kasan_kmalloc.constprop.0+0x84/0xa0
[ 5.267082] ? unpoison_range+0xf/0x30
[ 5.267287] ? unpoison_range+0xf/0x30
[ 5.267491] do_init_module+0xf8/0x350
[ 5.267697] load_module+0x3fe6/0x4340
[ 5.267902] ? vm_unmap_ram+0x1d0/0x1d0
[ 5.268115] ? module_frob_arch_sections+0x20/0x20
[ 5.268375] ? __do_sys_finit_module+0x108/0x170
[ 5.268624] __do_sys_finit_module+0x108/0x170
[ 5.268865] ? __ia32_sys_init_module+0x40/0x40
[ 5.269111] ? file_open_root+0x200/0x200
[ 5.269330] ? do_sys_open+0x85/0xe0
[ 5.269527] ? filp_open+0x50/0x50
[ 5.269714] ? exit_to_user_mode_prepare+0xfc/0x130
[ 5.269978] do_syscall_64+0x33/0x40
[ 5.270176] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 5.270450] RIP: 0033:0x7fa3f685bcf7
[ 5.270646] Code: 48 89 57 30 48 8b 04 24 48 89 47 38 e9 1d a0 02 00 48 89 f8 48 89 f7 48 89 d1
[ 5.271634] RSP: 002b:
00007ffca83048d8 EFLAGS:
00000246 ORIG_RAX:
0000000000000139
[ 5.272037] RAX:
ffffffffffffffda RBX:
0000000001e94a70 RCX:
00007fa3f685bcf7
[ 5.272416] RDX:
0000000000000000 RSI:
0000000001e939e0 RDI:
0000000000000003
[ 5.272794] RBP:
0000000000000003 R08:
0000000000000000 R09:
0000000000000001
[ 5.273171] R10:
00007fa3f68bf300 R11:
0000000000000246 R12:
0000000001e939e0
[ 5.273550] R13:
0000000000000000 R14:
0000000001e93bd0 R15:
0000000000000001
[ 5.273928] ==================================================================
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210203040727.868921-1-ztong0001@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Dan Carpenter [Wed, 3 Feb 2021 09:54:24 +0000 (12:54 +0300)]
drm/virtio: fix an error code in virtio_gpu_init()
If devm_request_mem_region() fails this code currently returns success
but it should return -EBUSY.
Fixes:
6076a9711dc5 ("drm/virtio: implement blob resources: probe for host visible region")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: http://patchwork.freedesktop.org/patch/msgid/YBpy0GS7GfmafMfe@mwanda
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Daniel Vetter [Fri, 22 Jan 2021 13:36:23 +0000 (14:36 +0100)]
drm/todo: Add entry for moving to dma_resv_lock
Requested by Thomas. I think it justifies a new level, since I tried
to make some forward progress on this last summer, and gave up (for
now). This is very tricky.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210122133624.1751802-1-daniel.vetter@ffwll.ch
Ye Bin [Sat, 23 Jan 2021 01:30:14 +0000 (09:30 +0800)]
drm/nouveau: remove set but not used variable ‘pdev’ in nouveau_bios_init
Fix follow warning:
drivers/gpu/drm/nouveau/nouveau_bios.c:2086:18: warning: variable ‘pdev’ set but not used [-Wunused-but-set-variable]
struct pci_dev *pdev;
^~~~
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210123013014.3815870-1-yebin10@huawei.com
Zack Rusin [Thu, 28 Jan 2021 17:35:22 +0000 (12:35 -0500)]
drm/vmwgfx: Fix some memory leaks on errors
Dan noticed some issues with pci_release_region, this builds upon
that and fixes some other lingering issues. As part of this we
also can stop trying to manually free our managed device;
there's no need for it, it will be cleaned up automatically for us.
Fixes:
8772c0bb58bb ("drm/vmwgfx: Cleanup pci resource allocation")
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128173756.121525-1-zackr@vmware.com
Bernard Zhao [Tue, 2 Feb 2021 12:23:38 +0000 (04:23 -0800)]
drm/vc4: remove unneeded variable: "ret"
remove unneeded variable: "ret".
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210202122338.15351-1-bernard@vivo.com
Joseph Schulte [Mon, 25 Jan 2021 14:48:15 +0000 (08:48 -0600)]
drm: replace drm_modeset_lock_all() in drm_client_modeset_dpms_legacy()
This patch helps complete Use DRM_MODESET_LOCK_ALL* helpers instead of
boilerplate todo in Documentation/gpu/todo.rst
Signed-off-by: Joseph Schulte <joeschulte.js@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210125144815.8389-1-joeschulte.js@gmail.com
Christian König [Mon, 1 Feb 2021 09:09:07 +0000 (10:09 +0100)]
drm/v3d/v3d_sched: fix scheduler callbacks return status
Looks like this was not correctly adjusted.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes:
a6a1f036c74e ("drm/scheduler: Job timeout handler returns status (v3)")
Link: https://patchwork.freedesktop.org/patch/msgid/20210201091159.177853-1-christian.koenig@amd.com
Thomas Zimmermann [Fri, 29 Jan 2021 09:56:04 +0000 (10:56 +0100)]
drm/gma500: Remove dependency on TTM
The gma500 driver does not use TTM.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129095604.32423-6-tzimmermann@suse.de
Thomas Zimmermann [Fri, 29 Jan 2021 09:56:03 +0000 (10:56 +0100)]
drm/gma500: Remove CONFIG_X86 conditionals from source files
Remove the CONFIG_X86 conditionals from the source code. The driver
already depends on X86 in the Kconfig file. Also, no one has been
trying to build it on a non-x86 platform recently, or they would have
noticed that drm_ttm_cache_flush() doesn't exist.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129095604.32423-5-tzimmermann@suse.de
Thomas Zimmermann [Fri, 29 Jan 2021 09:56:02 +0000 (10:56 +0100)]
drm/gma500: Drop DRM_GMA3600 config option
With support for the MID-related chips removed, only support for
desktop chips is left in the driver. So just build the complete
driver if DRM_GMA500 has been selected. Anyone who wants to enable
the Poulsbo code would probably also want the Cedarview code.
[Patrik: Fixed conflict due to Oaktrail not being dropped]
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129095604.32423-4-tzimmermann@suse.de
Thomas Zimmermann [Fri, 29 Jan 2021 09:56:00 +0000 (10:56 +0100)]
drm/gma500: Remove Medfield support
Medfield is an outdated mobile platform with apparently no users left.
Remove it from gma500.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129095604.32423-2-tzimmermann@suse.de
Joe Perches [Tue, 25 Aug 2020 04:56:05 +0000 (21:56 -0700)]
dma-buf: Avoid comma separated statements
Use semicolons and braces.
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/990bf6f33ccaf73ad56eb4bea8bd2c0db5e90a31.1598331148.git.joe@perches.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Qinglang Miao [Fri, 27 Nov 2020 09:44:38 +0000 (17:44 +0800)]
drm/lima: fix reference leak in lima_pm_busy
pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to putting operation will result in a
reference leak here.
A new function pm_runtime_resume_and_get is introduced in
[0] to keep usage counter balanced. So We fix the reference
leak by replacing it with new function.
[0] commit
dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
Fixes:
50de2e9ebbc0 ("drm/lima: enable runtime pm")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201127094438.121003-1-miaoqinglang@huawei.com
Luben Tuikov [Wed, 20 Jan 2021 20:09:59 +0000 (15:09 -0500)]
drm/scheduler: Job timeout handler returns status (v3)
This patch does not change current behaviour.
The driver's job timeout handler now returns
status indicating back to the DRM layer whether
the device (GPU) is no longer available, such as
after it's been unplugged, or whether all is
normal, i.e. current behaviour.
All drivers which make use of the
drm_sched_backend_ops' .timedout_job() callback
have been accordingly renamed and return the
would've-been default value of
DRM_GPU_SCHED_STAT_NOMINAL to restart the task's
timeout timer--this is the old behaviour, and is
preserved by this patch.
v2: Use enum as the status of a driver's job
timeout callback method.
v3: Return scheduler/device information, rather
than task information.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Qiang Yu <yuq825@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Eric Anholt <eric@anholt.net>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Steven Price <steven.price@arm.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/415095/
Dan Carpenter [Mon, 25 Jan 2021 08:45:37 +0000 (11:45 +0300)]
drm/vmwgfx/vmwgfx_drv: Fix an error path in vmw_setup_pci_resources()
The devm_memremap() function never returns NULL, it returns error
pointers so the test needs to be fixed. Also we need to call
pci_release_regions() to avoid a memory leak.
Fixes:
be4f77ac6884 ("drm/vmwgfx: Cleanup fifo mmio handling")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YA6FMboLhnE3uSvb@mwanda
Maxime Ripard [Mon, 11 Jan 2021 14:23:07 +0000 (15:23 +0100)]
dt-binding: display: bcm2711-hdmi: Add CEC and hotplug interrupts
The CEC and hotplug interrupts were missing when that binding was
introduced, let's add them in now that we've figured out how it works.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-14-maxime@cerno.tech
Maxime Ripard [Mon, 11 Jan 2021 14:23:06 +0000 (15:23 +0100)]
drm/vc4: hdmi: Don't register the CEC adapter if there's no interrupts
We introduced the BCM2711 support to the vc4 HDMI controller with 5.10,
but this was lacking any of the interrupts of the CEC controller so we
have to deal with the backward compatibility.
Do so by simply ignoring the CEC setup if the DT doesn't have the
interrupts property.
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-13-maxime@cerno.tech
Dom Cobley [Mon, 11 Jan 2021 14:23:05 +0000 (15:23 +0100)]
drm/vc4: hdmi: Remove cec_available flag
Now that our HDMI controller supports CEC for the BCM2711, let's remove
that flag.
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-12-maxime@cerno.tech
Maxime Ripard [Mon, 11 Jan 2021 14:23:04 +0000 (15:23 +0100)]
drm/vc4: hdmi: Support BCM2711 CEC interrupt setup
The HDMI controller found in the BCM2711 has an external interrupt
controller for the CEC and hotplug interrupt shared between the two
instances.
Let's add a variant flag to register a single interrupt handler and
deals with the interrupt handler setup, or two interrupt handlers
relying on an external irqchip.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-11-maxime@cerno.tech
Maxime Ripard [Mon, 11 Jan 2021 14:23:03 +0000 (15:23 +0100)]
drm/vc4: hdmi: Split the interrupt handlers
The BCM2711 has two different interrupt sources to transmit and receive
CEC messages, provided through an external interrupt chip shared between
the two HDMI interrupt controllers.
The rest of the CEC controller is identical though so we need to change
a bit the code organisation to share the code as much as possible, yet
still allowing to register independent handlers.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-10-maxime@cerno.tech
Maxime Ripard [Mon, 11 Jan 2021 14:23:02 +0000 (15:23 +0100)]
drm/vc4: hdmi: Introduce a CEC clock
While the BCM2835 had the CEC clock derived from the HSM clock, the
BCM2711 has a dedicated parent clock for it.
Let's introduce a separate clock for it so that we can handle both
cases.
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-9-maxime@cerno.tech
Maxime Ripard [Mon, 11 Jan 2021 14:23:01 +0000 (15:23 +0100)]
drm/vc4: hdmi: Update the CEC clock divider on HSM rate change
As part of the enable sequence we might change the HSM clock rate if the
pixel rate is different than the one we were already dealing with.
On the BCM2835 however, the CEC clock derives from the HSM clock so any
rate change will need to be reflected in the CEC clock divider to output
40kHz.
Fixes:
cd4cb49dc5bb ("drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rate")
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-8-maxime@cerno.tech
Maxime Ripard [Mon, 11 Jan 2021 14:23:00 +0000 (15:23 +0100)]
drm/vc4: hdmi: Compute the CEC clock divider from the clock rate
The CEC clock divider needs to output a frequency of 40kHz from the HSM
rate on the BCM2835. The driver used to have a fixed frequency for it,
but that changed for the BCM2711 and we now need to compute it
dynamically to maintain the proper rate.
Fixes:
cd4cb49dc5bb ("drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rate")
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-7-maxime@cerno.tech
Dom Cobley [Mon, 11 Jan 2021 14:22:59 +0000 (15:22 +0100)]
drm/vc4: hdmi: Restore cec physical address on reconnect
Currently we call cec_phys_addr_invalidate on a hotplug deassert.
That may be due to a TV power cycling, or an AVR being switched
on (and switching edid).
This makes CEC unusable since our controller wouldn't have a physical
address anymore.
Set it back up again on the hotplug assert.
Fixes:
15b4511a4af6 ("drm/vc4: add HDMI CEC support")
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-6-maxime@cerno.tech