OSDN Git Service
Randy Dunlap [Tue, 31 Jul 2018 11:06:58 +0000 (13:06 +0200)]
fb: amifb: fix build warnings when not builtin
Fix build warning when built as a loadable module.
amifb_setup() and amifb_setup_mcap() are only needed when the driver
is builtin.
This matches how the functions are called (using #ifndef MODULE).
../drivers/video/fbdev/amifb.c:2344:19: warning: 'amifb_setup' defined but not used [-Wunused-function]
static int __init amifb_setup(char *options)
../drivers/video/fbdev/amifb.c:2307:20: warning: 'amifb_setup_mcap' defined but not used [-Wunused-function]
static void __init amifb_setup_mcap(char *spec)
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Thomas Zimmermann [Tue, 31 Jul 2018 11:06:58 +0000 (13:06 +0200)]
fbdev/core: Disable console-lock warnings when fb.lockless_register_fb is set
If the console is unlocked during registration, the console subsystem
generates significant amounts of warnings, which obfuscate actual
debugging messages. Setting ignore_console_lock_warning while debugging
console registration avoid the noise.
v3:
- manipulate ignore_console_lock_warning with atomic_{inc,dec}
v2:
- restore ignore_console_lock_warning if lock_fb_info() fails
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Thomas Zimmermann [Tue, 31 Jul 2018 11:06:57 +0000 (13:06 +0200)]
console: Replace #if 0 with atomic var 'ignore_console_lock_warning'
The macro WARN_CONSOLE_UNLOCKED prints a warning when a thread enters
the console's critical section without having acquired the console
lock. The console lock can be ignored when debugging the console using
printk, but this makes WARN_CONSOLE_UNLOCKED generate unnecessary
warnings.
The variable ignore_console_lock_warning temporarily disables
WARN_CONSOLE_UNLOCKED. Developers interested in debugging the console's
critical sections should increment it before entering the CS and
decrement it after leaving the CS. Setting ignore_console_lock_warning
is only for debugging. Regular operation should not manipulate it.
Acknoledgements: This patch is based on an earlier version by Steven
Rostedt. The use of atomic increment/decrement was suggested by Petr
Mladek.
Link: http://lkml.kernel.org/r/717e6337-e7a6-7a92-1c1b-8929a25696b5@suse.de
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
[b.zolnierkie: use <linux/atomic.h>]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Mikulas Patocka [Wed, 25 Jul 2018 13:41:57 +0000 (15:41 +0200)]
udlfb: use spin_lock_irq instead of spin_lock_irqsave
spin_lock_irqsave and spin_unlock_irqrestore is inteded to be called from
a context where it is unknown if interrupts are enabled or disabled (such
as interrupt handlers). From a process context, we should call
spin_lock_irq and spin_unlock_irq, that avoids the costly pushf and popf
instructions.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Mikulas Patocka [Wed, 25 Jul 2018 13:41:57 +0000 (15:41 +0200)]
udlfb: avoid prefetch
Modern processors can detect linear memory accesses and prefetch data
automatically, so there's no need to use prefetch.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Mikulas Patocka [Wed, 25 Jul 2018 13:41:56 +0000 (15:41 +0200)]
udlfb: optimization - test the backing buffer
Currently, the udlfb driver only tests for identical bytes at the
beginning or at the end of a page and renders anything between the first
and last mismatching pixel. But pages are not the same as lines, so this
is quite suboptimal - if there is something modified at the beginning of a
page and at the end of a page, the whole page is rendered, even if most of
the page is not modified.
This patch makes it test for identical pixels at the beginning and end of
each rendering command. This patch improves identical byte detection by
41% when playing video in a window.
This patch also fixes a possible screen corruption if the user is writing
to the framebuffer while dlfb_render_hline is in progress - the pixel data
that is copied to the backbuffer with memcpy may be different from the
pixel data that is actually rendered to the hardware (because the content
of the framebuffer may change between memcpy and the rendering command).
We must make sure that we copy exactly the same pixel as the pixel that is
being rendered.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
[b.zolnierkie: fix code indent]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Mikulas Patocka [Wed, 25 Jul 2018 13:41:56 +0000 (15:41 +0200)]
udlfb: allow reallocating the framebuffer
This patch changes udlfb so that it may reallocate the framebuffer when
setting higher-resolution mode. If we boot the system without monitor
attached, udlfb creates a framebuffer with the size 800x600. This patch
makes it possible to select higher videomode with the fbset command when
a monitor is attached.
Note that there is no reliable way to prevent the system from touching the
old framebuffer, so we must not free it. We add it to the list
dlfb->deferred_free and free it when the driver is unloaded.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
[b.zolnierkie: sparse fixes]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Mikulas Patocka [Wed, 25 Jul 2018 13:41:56 +0000 (15:41 +0200)]
udlfb: set line_length in dlfb_ops_set_par
Set the variable "line_length" in the function dlfb_ops_set_par. Without
this, we get garbage if we select different videomode with fbset.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Mikulas Patocka [Wed, 25 Jul 2018 13:41:56 +0000 (15:41 +0200)]
udlfb: handle allocation failure
Allocations larger than PAGE_ALLOC_COSTLY_ORDER are unreliable and they
may fail anytime. This patch fixes the udlfb driver so that when a large
alloactions fails, it tries to do multiple smaller allocations.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Mikulas Patocka [Wed, 25 Jul 2018 13:41:55 +0000 (15:41 +0200)]
udlfb: set optimal write delay
The default delay 5 jiffies is too much when the kernel is compiled with
HZ=100 - it results in jumpy cursor in Xwindow.
In order to find out the optimal delay, I benchmarked the driver on
1280x720x30fps video. I found out that with HZ=1000, 10ms is acceptable,
but with HZ=250 or HZ=300, we need 4ms, so that the video is played
without any frame skips.
This patch changes the delay to this value.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Mikulas Patocka [Wed, 25 Jul 2018 13:41:55 +0000 (15:41 +0200)]
udlfb: make a local copy of fb_ops
The defio subsystem overwrites the method fb_osp->mmap. That method is
stored in module's static data - and that means that if we have multiple
diplaylink adapters, they will over write each other's method.
In order to avoid interference between multiple adapters, we copy the
fb_ops structure to a device-local memory.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Mikulas Patocka [Wed, 25 Jul 2018 13:41:55 +0000 (15:41 +0200)]
udlfb: don't switch if we are switching to the same videomode
The udlfb driver reprograms the hardware everytime the user switches the
console, that makes quite unusable when working on the console.
This patch makes the driver remember the videomode we are in and avoid
reprogramming the hardware if we switch to the same videomode.
We mask the "activate" field and the "FB_VMODE_SMOOTH_XPAN" flag when
comparing the videomode, because they cause spurious switches when
switching to and from the Xserver.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Mikulas Patocka [Wed, 25 Jul 2018 13:41:54 +0000 (15:41 +0200)]
udlfb: fix display corruption of the last line
The displaylink hardware has such a peculiarity that it doesn't render a
command until next command is received. This produces occasional
corruption, such as when setting 22x11 font on the console, only the first
line of the cursor will be blinking if the cursor is located at some
specific columns.
When we end up with a repeating pixel, the driver has a bug that it leaves
one uninitialized byte after the command (and this byte is enough to flush
the command and render it - thus it fixes the screen corruption), however
whe we end up with a non-repeating pixel, there is no byte appended and
this results in temporary screen corruption.
This patch fixes the screen corruption by always appending a byte 0xAF at
the end of URB. It also removes the uninitialized byte.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Mikulas Patocka [Wed, 25 Jul 2018 13:41:54 +0000 (15:41 +0200)]
udlfb: fix semaphore value leak
I observed that the performance of the udl fb driver degrades over time.
On a freshly booted machine, it takes 6 seconds to do "ls -la /usr/bin";
after some time of use, the same operation takes 14 seconds.
The reason is that the value of "limit_sem" decays over time.
The udl driver uses a semaphore "limit_set" to specify how many free urbs
are there on dlfb->urbs.list. If the count is zero, the "down" operation
will sleep until some urbs are added to the freelist.
In order to avoid some hypothetical deadlock, the driver will not call
"up" immediately, but it will offload it to a workqueue. The problem is
that if we call "schedule_delayed_work" on the same work item multiple
times, the work item may only be executed once.
This is happening:
* some urb completes
* dlfb_urb_completion adds it to the free list
* dlfb_urb_completion calls schedule_delayed_work to schedule the function
dlfb_release_urb_work to increase the semaphore count
* as the urb is on the free list, some other task grabs it and submits it
* the submitted urb completes, dlfb_urb_completion is called again
* dlfb_urb_completion calls schedule_delayed_work, but the work is already
scheduled, so it does nothing
* finally, dlfb_release_urb_work is called, it increases the semaphore
count by 1, although it should increase it by 2
So, the semaphore count is decreasing over time, and this causes gradual
performance degradation.
Note that in the current kernel, the "up" function may be called from
interrupt and it may race with the "down" function called by another
thread, so we don't have to offload the call of "up" to a workqueue at
all. This patch removes the workqueue code. The patch also changes
"down_interruptible" to "down" in dlfb_free_urb_list, so that we will
clean up the driver properly even if a signal arrives.
With this patch, the performance of udlfb no longer degrades.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
[b.zolnierkie: fix immediatelly -> immediately typo]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Mikulas Patocka [Wed, 25 Jul 2018 13:41:54 +0000 (15:41 +0200)]
fb: fix lost console when the user unplugs a USB adapter
I have a USB display adapter using the udlfb driver and I use it on an ARM
board that doesn't have any graphics card. When I plug the adapter in, the
console is properly displayed, however when I unplug and re-plug the
adapter, the console is not displayed and I can't access it until I reboot
the board.
The reason is this:
When the adapter is unplugged, dlfb_usb_disconnect calls
unlink_framebuffer, then it waits until the reference count drops to zero
and then it deallocates the framebuffer. However, the console that is
attached to the framebuffer device keeps the reference count non-zero, so
the framebuffer device is never destroyed. When the USB adapter is plugged
again, it creates a new device /dev/fb1 and the console is not attached to
it.
This patch fixes the bug by unbinding the console from unlink_framebuffer.
The code to unbind the console is moved from do_unregister_framebuffer to
a function unbind_console. When the console is unbound, the reference
count drops to zero and the udlfb driver frees the framebuffer. When the
adapter is plugged back, a new framebuffer is created and the console is
attached to it.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Bernie Thompson <bernie@plugable.com>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: stable@vger.kernel.org
[b.zolnierkie: preserve old behavior for do_unregister_framebuffer()]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Hans de Goede [Tue, 24 Jul 2018 17:11:28 +0000 (19:11 +0200)]
efifb: BGRT: Do not copy the boot graphics for non native resolutions
On x86 some firmwares use a low non native resolution for the display when
they have shown some text messages. While keeping the bgrt filled with info
for the native resolution. If the bgrt image intended for the native
resolution still fits, it will be displayed very close to the right edge of
the display looking quite bad.
This commits adds a (heuristics based) checks for this and makes efifb
not show the boot graphics when this is the case.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Randy Dunlap [Tue, 24 Jul 2018 17:11:28 +0000 (19:11 +0200)]
fbdev: fix omap2/omapfb/dss/ indentation warning
Fix indentation warning (from gcc 8.1.0) in omap2/omapfb:
../drivers/video/fbdev/omap2/omapfb/dss/dispc.c: In function 'pixinc':
../drivers/video/fbdev/omap2/omapfb/dss/dispc.c:1859:2: warning: this 'else' clause does not guard... [-Wmisleading-indentation]
else
^~~~
../drivers/video/fbdev/omap2/omapfb/dss/dispc.c:1861:3: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'else'
return 0;
^~~~~~
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Colin Ian King [Tue, 24 Jul 2018 17:11:28 +0000 (19:11 +0200)]
omapfb: encoder-tpd12s015: remove redundant pointer 'in'
Pointer 'in' is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
warning: variable 'in' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Colin Ian King [Tue, 24 Jul 2018 17:11:28 +0000 (19:11 +0200)]
video: fbdev: tridentfb: remove deadcode on unreachable case statement
The value of tmp being used in the switch statement has the range of
just 0..3 hence the case 4 statement can never be reached and is
deadcode and can be removed.
Detected by CoverityScan, CID#744384 ("Logically dead code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Dan Carpenter [Tue, 24 Jul 2018 17:11:28 +0000 (19:11 +0200)]
fbdev: omapfb: off by one in omapfb_register_client()
The omapfb_register_client[] array has OMAPFB_PLANE_NUM elements so the
> should be >= or we are one element beyond the end of the array.
Fixes:
8b08cf2b64f5 ("OMAP: add TI OMAP framebuffer driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Imre Deak <imre.deak@solidboot.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Gustavo A. R. Silva [Tue, 24 Jul 2018 17:11:28 +0000 (19:11 +0200)]
video: fbdev: mark expected switch fall-throughs
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Gustavo A. R. Silva [Tue, 24 Jul 2018 17:11:27 +0000 (19:11 +0200)]
omapfb: Mark expected switch fall-throughs
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Gustavo A. R. Silva [Tue, 24 Jul 2018 17:11:27 +0000 (19:11 +0200)]
fbdev: fbmem: mark expected switch fall-through
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Randy Dunlap [Tue, 24 Jul 2018 17:11:27 +0000 (19:11 +0200)]
fbdev/via: fix defined but not used warning
Fix a build warning in viafbdev.c when CONFIG_PROC_FS is not enabled
by marking the unused function as __maybe_unused.
../drivers/video/fbdev/via/viafbdev.c:1471:12: warning: 'viafb_sup_odev_proc_show' defined but not used [-Wunused-function]
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Arnd Bergmann [Tue, 24 Jul 2018 17:11:27 +0000 (19:11 +0200)]
omapfb: rename omap2 module to omap2fb.ko
In a kernel configuration with both CONFIG_FB_OMAP=m and CONFIG_FB_OMAP2=m,
Kbuild fails to point out that we have two modules with the same name (omapfb.ko),
but instead fails with a cryptic error message like:
ERROR: "omapfb_register_panel" [drivers/video/fbdev/omap/lcd_osk.ko] undefined!
This can now happen when building a randconfig kernel with CONFIG_ARCH_OMAP1,
as the omap1 fbdev driver depends on that, whiel the omap2 fbdev driver can
now be built anywhere with CONFIG_COMPILE_TEST.
The solution is to rename one of the two modules, so for consistency with
the directory naming I decided to rename the omap2 version to omap2fb.ko.
Fixes:
7378f1149884 ("media: omap2: omapfb: allow building it with COMPILE_TEST")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tony Lindgren <tony@atomide.com>
Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Anton Vasilyev [Tue, 24 Jul 2018 17:11:27 +0000 (19:11 +0200)]
video: goldfishfb: fix memory leak on driver remove
goldfish_fb_probe() allocates memory for fb, but goldfish_fb_remove() does
not have deallocation of fb, which leads to memory leak on probe/remove.
The patch adds deallocation into goldfish_fb_remove().
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Cc: Aleksandar Markovic <aleksandar.markovic@mips.com>
Cc: Miodrag Dinic <miodrag.dinic@mips.com>
Cc: Goran Ferenc <goran.ferenc@mips.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Daniel Vetter [Tue, 24 Jul 2018 17:11:27 +0000 (19:11 +0200)]
fbdev: fix modedb docs in fb_find_mode
Fix up the indenting that confused sphinx. To make sure we
don't have to make the examples unreadable with escaping just
put them in as block quotes, that seems the simplest solution.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[b.zolnierkie: ported over fbdev changes]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Dan Carpenter [Tue, 24 Jul 2018 17:11:26 +0000 (19:11 +0200)]
video: fbdev: metronomefb: fix some off by one bugs
The "mem" buffer has "size" bytes. The ">" should be ">=" to prevent
reading one character beyond the end of the array.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Lyude Paul [Tue, 24 Jul 2018 17:11:26 +0000 (19:11 +0200)]
video/console/vgacon: Print big fat warning with nomodeset
It's been a pretty good while since kernel modesetting was introduced.
It has almost entirely replaced previous solutions which required
userspace modesetting, and I can't even recall any drivers off the top
of my head for modern day hardware that don't only support one or the
other. Even nvidia's ugly blob does not require the use of nomodeset,
and only requires that nouveau be blacklisted.
Effectively, the only thing nomodeset does in the year 2018 is disable
your graphics drivers. Since VESA is a thing, this will give many users
the false impression that they've actually fixed an issue they were
having with their machine simply because the laptop will boot up to a
degraded GUI. This of course, is never actually the case.
Things get even worse when you consider that there's still an enormous
amount of tutorials users find on the internet that still suggest adding
nomodeset, along with various users who have been around long enough to
still suggest it.
There really isn't any legitimate reason I can see for this to be an
option that's used by anyone else other then developers, or properly
informed users. So, let's end the confusion and start printing warnings
whenever it's enabled.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Jan H. Schönherr" <jschoenh@amazon.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Yisheng Xie [Tue, 24 Jul 2018 17:11:26 +0000 (19:11 +0200)]
fbdev: fix typo in comment
Change beeng to being and occured to occurred.
Signed-off-by: Yisheng Xie <ysxie@foxmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: David Lechner <david@lechnology.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Yisheng Xie [Tue, 24 Jul 2018 17:11:26 +0000 (19:11 +0200)]
fbcon: introduce for_each_registered_fb() helper
Following pattern is often used:
for (i = 0; i < FB_MAX; i++) {
if (registered_fb[i]) {
...
}
}
Therefore, as Andy's suggestion, for_each_registered_fb() helper can
be introduced to make the code easier to read and write by reducing
indentation level. It also saves few lines of code in each occurrence.
This patch convert all part here at the same time.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yisheng Xie <ysxie@foxmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: David Lechner <david@lechnology.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Kees Cook [Tue, 24 Jul 2018 17:11:26 +0000 (19:11 +0200)]
video: fbdev: fsl-diu-fb: Remove VLA usage
In the quest to remove all stack VLA usage from the kernel[1], this moves
the buffer off the stack (since it could be as much as 1024 bytes), and
uses a new area in the cursor data structure. Additionally adds missed
documentation and removes redundant assignments.
[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Daniel Mack [Tue, 24 Jul 2018 17:11:26 +0000 (19:11 +0200)]
video: fbdev: pxafb: Add support for lcd-supply regulator
Optionally obtain a lcd-supply regulator during probe and use it in
__pxafb_lcd_power() to switch the power supply of LCD panels.
This helps boards booted from DT to control such voltages without
callbacks.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Daniel Mack [Tue, 24 Jul 2018 17:11:25 +0000 (19:11 +0200)]
video: fbdev: pxafb: handle errors from pxafb_init_fbinfo() correctly
pxafb_init_fbinfo() can not only report errors caused by failed
allocations but also when the clock can't be found.
To fix this, return an error pointer instead of NULL in case of errors,
and up-chain the result.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Daniel Mack [Tue, 24 Jul 2018 17:11:25 +0000 (19:11 +0200)]
video: fbdev: pxafb: switch to devm_* API
This helps us clean up the probe() and remove() implementations.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Daniel Mack [Tue, 24 Jul 2018 17:11:25 +0000 (19:11 +0200)]
video: fbdev: pxafb: clear allocated memory for video modes
When parsing the video modes from DT properties, make sure to zero out
memory before using it. This is important because not all fields in the mode
struct are explicitly initialized, even though they are used later on.
Fixes:
420a488278e86 ("video: fbdev: pxafb: initial devicetree conversion")
Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Daniel Mack [Tue, 24 Jul 2018 17:11:25 +0000 (19:11 +0200)]
video: fbdev: pxa3xx_gcu: add devicetree bindings
Add a device tree match table for this hardware graphics acceleration
driver so it can be used by pxa3xx boards booted with a devicetree.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Daniel Mack [Tue, 24 Jul 2018 17:11:24 +0000 (19:11 +0200)]
dt-bindings: display: add devicetree bindings for pxa300-gcu
This patch adds the binding documentation for the pxa300 gcu.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Fredrik Noring [Tue, 24 Jul 2018 17:11:24 +0000 (19:11 +0200)]
fbdev: Distinguish between interlaced and progressive modes
I discovered the problem when developing a frame buffer driver for the
PlayStation 2 (not yet merged), using the following video modes for the
PlayStation 3 in drivers/video/fbdev/ps3fb.c:
}, {
/* 1080if */
"1080if", 50, 1920, 1080, 13468, 148, 484, 36, 4, 88, 5,
FB_SYNC_BROADCAST, FB_VMODE_INTERLACED
}, {
/* 1080pf */
"1080pf", 50, 1920, 1080, 6734, 148, 484, 36, 4, 88, 5,
FB_SYNC_BROADCAST, FB_VMODE_NONINTERLACED
},
In ps3fb_probe, the mode_option module parameter is used with fb_find_mode
but it can only select the interlaced variant of 1920x1080 since the loop
matching the modes does not take the difference between interlaced and
progressive modes into account.
In short, without the patch, progressive 1920x1080 cannot be chosen as a
mode_option parameter since fb_find_mode (falsely) thinks interlace is a
perfect match.
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
[b.zolnierkie: updated patch description]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Hans de Goede [Tue, 3 Jul 2018 15:43:10 +0000 (17:43 +0200)]
efifb: Copy the ACPI BGRT boot graphics to the framebuffer
On systems where fbcon is configured for deferred console takeover, the
intend is for the framebuffer to show the boot graphics (e.g a vendor
logo) until some message (e.g. an error) is printed or a graphical
session takes over.
Some firmware relies on the OS to show the boot graphics.
This patch adds support to efifb to show the boot graphics and
automatically enables this when fbcon is configured for deferred
console takeover.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Hans de Goede [Tue, 3 Jul 2018 15:43:10 +0000 (17:43 +0200)]
efi/bgrt: Drop __initdata from bgrt_image_size
bgrt_image_size is necessary to (optionally) show the boot graphics from
the efifb code. The efifb driver is a platform driver, using a normal
driver probe() driver callback. So even though it is always builtin it
cannot reference __initdata.
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Geert Uytterhoeven [Tue, 3 Jul 2018 15:43:09 +0000 (17:43 +0200)]
video: fbdev: simplefb: Stop including <linux/clk-provider.h>
Simplefb is not a clock provider, but it uses of_clk_get_parent_count(),
so it can just include <linux/of_clk.h> instead.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Julia Lawall [Tue, 3 Jul 2018 15:43:09 +0000 (17:43 +0200)]
omapfb: encoder-tpd12s015: fix error return code
Return an error code on failure.
Problem found using Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Christoffer Dall [Tue, 3 Jul 2018 15:43:09 +0000 (17:43 +0200)]
video: fbdev: Set pixclock = 0 in goldfishfb
User space Android code identifies pixclock == 0 as a sign for emulation
and will set the frame rate to 60 fps when reading this value, which is
the desired outcome.
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Yu Ning [Tue, 3 Jul 2018 15:43:09 +0000 (17:43 +0200)]
video: fbdev: Enable ACPI-based enumeration for goldfishfb
Add an ACPI id to make goldfish framebuffer to support ACPI enumeration.
Signed-off-by: Yu Ning <yu.ning@intel.com>
Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Roman Kiryanov [Tue, 3 Jul 2018 15:43:09 +0000 (17:43 +0200)]
video: fbdev: Fix checkpatch warnings in goldfishfb.c
Address issues pointed by checkpatch.pl
Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Bartlomiej Zolnierkiewicz [Fri, 29 Jun 2018 09:54:33 +0000 (11:54 +0200)]
Merge tag 'ib-fbdev-drm-v4.19-deferred-console-takeover-fixup' of https://github.com/bzolnier/linux into fbdev-for-next
Immutable branch between fbdev and drm for the v4.19 merge window
(contains build fixup for the deferred console takeover feature)
Hans de Goede [Fri, 29 Jun 2018 09:46:19 +0000 (11:46 +0200)]
console: dummycon: export dummycon_[un]register_output_notifier
Export dummycon_[un]register_output_notifier, the fbcon code needs this
and may be build as a module.
Fixes:
83d83bebf401 ("console/fbcon: Add support for deferred console takeover")
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Bartlomiej Zolnierkiewicz [Thu, 28 Jun 2018 13:41:55 +0000 (15:41 +0200)]
Merge tag 'ib-fbdev-drm-v4.19-deferred-console-takeover' of https://github.com/bzolnier/linux into fbdev-for-next
Immutable branch between fbdev and drm for the v4.19 merge window
(contains the deferred console takeover feature)
Hans de Goede [Thu, 28 Jun 2018 13:20:30 +0000 (15:20 +0200)]
console/fbcon: Add support for deferred console takeover
Currently fbcon claims fbdevs as soon as they are registered and takes over
the console as soon as the first fbdev gets registered.
This behavior is undesirable in cases where a smooth graphical bootup is
desired, in such cases we typically want the contents of the framebuffer
(typically a vendor logo) to stay in place as is.
The current solution for this problem (on embedded systems) is to not
enable fbcon.
This commit adds a new FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER config option,
which when enabled defers fbcon taking over the console from the dummy
console until the first text is displayed on the console. Together with the
"quiet" kernel commandline option, this allows fbcon to still be used
together with a smooth graphical bootup, having it take over the console as
soon as e.g. an error message is logged.
Note the choice to detect the first console output in the dummycon driver,
rather then handling this entirely inside the fbcon code, was made after
2 failed attempts to handle this entirely inside the fbcon code. The fbcon
code is woven quite tightly into the console code, making this to only
feasible option.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Hans de Goede [Thu, 28 Jun 2018 13:20:28 +0000 (15:20 +0200)]
fbcon: Call WARN_CONSOLE_UNLOCKED() where applicable
Replace comments about places where the console lock should be held with
calls to WARN_CONSOLE_UNLOCKED() to assert that it is actually held.
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Hans de Goede [Thu, 28 Jun 2018 13:20:27 +0000 (15:20 +0200)]
printk: Export is_console_locked
This is a preparation patch for adding a number of WARN_CONSOLE_UNLOCKED()
calls to the fbcon code, which may be built as a module (event though
usually it is not).
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Bartlomiej Zolnierkiewicz [Thu, 28 Jun 2018 12:07:57 +0000 (14:07 +0200)]
Merge tag 'v4.18-rc2' of https://git./linux/kernel/git/torvalds/linux into fbdev-for-next
Linux 4.18-rc2
Linus Torvalds [Sun, 24 Jun 2018 12:54:29 +0000 (20:54 +0800)]
Linux 4.18-rc2
Linus Torvalds [Sun, 24 Jun 2018 12:29:15 +0000 (20:29 +0800)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"A pile of perf updates:
Kernel side:
- Remove an incorrect warning in uprobe_init_insn() when
insn_get_length() fails. The error return code is handled at the
call site.
- Move the inline keyword to the right place in the perf ringbuffer
code to address a W=1 build warning.
Tooling:
perf stat:
- Fix metric column header display alignment
- Improve error messages for default attributes, providing better
output for error in command line.
- Add --interval-clear option, to provide a 'watch' like printing
perf script:
- Show hw-cache events too
perf c2c:
- Fix data dependency problem in layout of 'struct c2c_hist_entry'
Core:
- Do not blindly assume that 'struct perf_evsel' can be obtained via
a straight forward container_of() as there are call sites which
hand in a plain 'struct hist' which is not part of a container.
- Fix error index in the PMU event parser, so that error messages can
point to the problematic token"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Move the inline keyword at the beginning of the function declaration
uprobes/x86: Remove incorrect WARN_ON() in uprobe_init_insn()
perf script: Show hw-cache events
perf c2c: Keep struct hist_entry at the end of struct c2c_hist_entry
perf stat: Add event parsing error handling to add_default_attributes
perf stat: Allow to specify specific metric column len
perf stat: Fix metric column header display alignment
perf stat: Use only color_fprintf call in print_metric_only
perf stat: Add --interval-clear option
perf tools: Fix error index for pmu event parser
perf hists: Reimplement hists__has_callchains()
perf hists browser gtk: Use hist_entry__has_callchains()
perf hists: Make hist_entry__has_callchains() work with 'perf c2c'
perf hists: Save the callchain_size in struct hist_entry
Linus Torvalds [Sun, 24 Jun 2018 12:18:19 +0000 (20:18 +0800)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull rseq fixes from Thomas Gleixer:
"A pile of rseq related fixups:
- Prevent infinite recursion when delivering SIGSEGV
- Remove the abort of rseq critical section on fork() as syscalls
inside rseq critical sections are explicitely forbidden. So no
point in doing the abort on the child.
- Align the rseq structure on 32 bytes in the ARM selftest code.
- Fix file permissions of the test script"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: Avoid infinite recursion when delivering SIGSEGV
rseq/cleanup: Do not abort rseq c.s. in child on fork()
rseq/selftests/arm: Align 'struct rseq_cs' on 32 bytes
rseq/selftests: Make run_param_test.sh executable
Linus Torvalds [Sun, 24 Jun 2018 12:16:17 +0000 (20:16 +0800)]
Merge branch 'efi-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull EFI fixes from Thomas Gleixner:
"Two fixlets for the EFI maze:
- Properly zero variables to prevent an early boot hang on EFI mixed
mode systems
- Fix the fallout of merging the 32bit and 64bit variants of EFI PCI
related code which ended up chosing the 32bit variant of the actual
EFi call invocation which leads to failures on 64bit"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/x86: Fix incorrect invocation of PciIo->Attributes()
efi/libstub/tpm: Initialize efi_physical_addr_t vars to zero for mixed mode
Linus Torvalds [Sun, 24 Jun 2018 12:06:42 +0000 (20:06 +0800)]
Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull core fixes from Thomas Gleixner:
"Two tiny fixes:
- Add the missing machine_real_restart() to objtools noreturn list so
it stops complaining
- Fix a trivial comment typo"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
kernel.h: Fix a typo in comment
objtool: Add machine_real_restart() to the noreturn list
Linus Torvalds [Sun, 24 Jun 2018 11:59:52 +0000 (19:59 +0800)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of fixes for x86:
- Make Xen PV guest deal with speculative store bypass correctly
- Address more fallout from the 5-Level pagetable handling. Undo an
__initdata annotation to avoid section mismatch and malfunction
when post init code would touch the freed variable.
- Handle exception fixup in math_error() before calling notify_die().
The reverse call order incorrectly triggers notify_die() listeners
for soemthing which is handled correctly at the site which issues
the floating point instruction.
- Fix an off by one in the LLC topology calculation on AMD
- Handle non standard memory block sizes gracefully un UV platforms
- Plug a memory leak in the microcode loader
- Sanitize the purgatory build magic
- Add the x86 specific device tree bindings directory to the x86
MAINTAINER file patterns"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Fix 'no5lvl' handling
Revert "x86/mm: Mark __pgtable_l5_enabled __initdata"
x86/CPU/AMD: Fix LLC ID bit-shift calculation
MAINTAINERS: Add file patterns for x86 device tree bindings
x86/microcode/intel: Fix memleak in save_microcode_patch()
x86/platform/UV: Add kernel parameter to set memory block size
x86/platform/UV: Use new set memory block size function
x86/platform/UV: Add adjustable set memory block size function
x86/build: Remove unnecessary preparation for purgatory
Revert "kexec/purgatory: Add clean-up for purgatory directory"
x86/xen: Add call of speculative_store_bypass_ht_init() to PV paths
x86: Call fixup_exception() before notify_die() in math_error()
Linus Torvalds [Sun, 24 Jun 2018 11:48:30 +0000 (19:48 +0800)]
Merge branch 'x86-pti-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 pti fixes from Thomas Gleixner:
"Two small updates for the speculative distractions:
- Make it more clear to the compiler that array_index_mask_nospec()
is not subject for optimizations. It's not perfect, but ...
- Don't report XEN PV guests as vulnerable because their mitigation
state depends on the hypervisor. Report unknown and refer to the
hypervisor requirement"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/spectre_v1: Disable compiler optimizations over array_index_mask_nospec()
x86/pti: Don't report XenPV as vulnerable
Linus Torvalds [Sun, 24 Jun 2018 11:36:16 +0000 (19:36 +0800)]
Merge branch 'locking-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"A set of fixes and updates for the locking code:
- Prevent lockdep from updating irq state within its own code and
thereby confusing itself.
- Buid fix for older GCCs which mistreat anonymous unions
- Add a missing lockdep annotation in down_read_non_onwer() which
causes up_read_non_owner() to emit a lockdep splat
- Remove the custom alpha dec_and_lock() implementation which is
incorrect in terms of ordering and use the generic one.
The remaining two commits are not strictly fixes. They provide irqsave
variants of atomic_dec_and_lock() and refcount_dec_and_lock(). These
are required to merge the relevant updates and cleanups into different
maintainer trees for 4.19, so routing them into mainline without
actual users is the sanest approach.
They should have been in -rc1, but last weekend I took the liberty to
just avoid computers in order to regain some mental sanity"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/qspinlock: Fix build for anonymous union in older GCC compilers
locking/lockdep: Do not record IRQ state within lockdep code
locking/rwsem: Fix up_read_non_owner() warning with DEBUG_RWSEMS
locking/refcounts: Implement refcount_dec_and_lock_irqsave()
atomic: Add irqsave variant of atomic_dec_and_lock()
alpha: Remove custom dec_and_lock() implementation
Linus Torvalds [Sun, 24 Jun 2018 11:22:19 +0000 (19:22 +0800)]
Merge branch 'ras-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull ras fixes from Thomas Gleixner:
"A set of fixes for RAS/MCE:
- Improve the error message when the kernel cannot recover from a MCE
so the maximum amount of information gets provided.
- Individually check MCE recovery features on SkyLake CPUs instead of
assuming none when the CAPID0 register does not advertise the
general ability for recovery.
- Prevent MCE to output inconsistent messages which first show an
error location and then claim that the source is unknown.
- Prevent overwriting MCi_STATUS in the attempt to gather more
information when a fatal MCE has alreay been detected. This leads
to empty status values in the printout and failing to react
promptly on the fatal event"
* 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Fix incorrect "Machine check from unknown source" message
x86/mce: Do not overwrite MCi_STATUS in mce_no_way_out()
x86/mce: Check for alternate indication of machine check recovery on Skylake
x86/mce: Improve error message when kernel cannot recover
Linus Torvalds [Sun, 24 Jun 2018 11:16:42 +0000 (19:16 +0800)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"A small set of fixes for time(r) related issues:
- Fix a long standing conversion issue in jiffies_to_msecs() for odd
HZ values like 1024 or 1200 which resulted in returning 0 for small
jiffies values due to rounding down.
- Use the proper CONFIG symbol in the new Y2038 safe compat code for
posix-timers. Not yet a visible breakage, but this will immediately
trigger when the architecture support for the new interfaces is
merged.
- Return an error code in the STM32 clocksource driver on failure
instead of success.
- Remove the redundant and stale irq disabled check in the posix cpu
timer code. The check is at the wrong place anyway and lockdep
already covers it via the sighand lock locking coverage"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Make sure jiffies_to_msecs() preserves non-zero time periods
posix-timers: Fix nanosleep_copyout() for CONFIG_COMPAT_32BIT_TIME
clocksource/drivers/stm32: Fix error return code
posix-cpu-timers: Remove lockdep_assert_irqs_disabled()
Linus Torvalds [Sun, 24 Jun 2018 11:01:18 +0000 (19:01 +0800)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of fixes mostly for the ARM/GIC world:
- Fix the MSI affinity handling in the ls-scfg irq chip driver so it
updates and uses the effective affinity mask correctly
- Prevent binding LPIs to offline CPUs and respect the Cavium erratum
which requires that LPIs which belong to an offline NUMA node are
not bound to a CPU on a different NUMA node.
- Free only the amount of allocated interrupts in the GIC-V2M driver
instead of trying to free log2(nrirqs).
- Prevent emitting SYNC and VSYNC targetting non existing interrupt
collections in the GIC-V3 ITS driver
- Ensure that the GIV-V3 interrupt redistributor is correctly
reprogrammed on CPU hotplug
- Remove a stale unused helper function"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqdesc: Delete irq_desc_get_msi_desc()
irqchip/gic-v3-its: Fix reprogramming of redistributors on CPU hotplug
irqchip/gic-v3-its: Only emit VSYNC if targetting a valid collection
irqchip/gic-v3-its: Only emit SYNC if targetting a valid collection
irqchip/gic-v3-its: Don't bind LPI to unavailable NUMA node
irqchip/gic-v2m: Fix SPI release on error path
irqchip/ls-scfg-msi: Fix MSI affinity handling
genirq/debugfs: Add missing IRQCHIP_SUPPORTS_LEVEL_MSI debug
Linus Torvalds [Sun, 24 Jun 2018 09:19:42 +0000 (17:19 +0800)]
Merge tag 'mips_fixes_4.18_1' of git://git./linux/kernel/git/mips/linux
Pull MIPS fixes from Paul Burton:
"A few MIPS fixes for 4.18:
- a GPIO device name fix for a regression in v4.15-rc1.
- an errata workaround for the BCM5300X platform.
- a fix to ftrace function graph tracing, broken for a long time with
the fix applying cleanly back as far as v3.17.
- addition of read barriers to in{b,w,l,q}() functions, matching
behavior of other architectures & mirroring the equivalent addition
to read{b,w,l,q} in v4.17-rc2.
Plus changes to wire up new syscalls introduced in the 4.18 cycle:
- Restartable sequences support is added, including MIPS support in
the selftests.
- io_pgetevents is wired up"
* tag 'mips_fixes_4.18_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Wire up io_pgetevents syscall
rseq/selftests: Implement MIPS support
MIPS: Wire up the restartable sequences (rseq) syscall
MIPS: Add syscall detection for restartable sequences
MIPS: Add support for restartable sequences
MIPS: io: Add barrier after register read in inX()
mips: ftrace: fix static function graph tracing
MIPS: BCM47XX: Enable 74K Core ExternalSync for PCIe erratum
MIPS: pb44: Fix i2c-gpio GPIO descriptor table
Ard Biesheuvel [Sat, 23 Jun 2018 21:19:03 +0000 (23:19 +0200)]
efi/x86: Fix incorrect invocation of PciIo->Attributes()
The following commit:
2c3625cb9fa2 ("efi/x86: Fold __setup_efi_pci32() and __setup_efi_pci64() into one function")
... merged the two versions of __setup_efi_pciXX(), without taking into
account that the 32-bit version used a rather dodgy trick to pass an
immediate 0 constant as argument for a uint64_t parameter.
The issue is caused by the fact that on x86, UEFI protocol method calls
are redirected via struct efi_config::call(), which is a variadic function,
and so the compiler has to infer the types of the parameters from the
arguments rather than from the prototype.
As the 32-bit x86 calling convention passes arguments via the stack,
passing the unqualified constant 0 twice is the same as passing 0ULL,
which is why the 32-bit code in __setup_efi_pci32() contained the
following call:
status = efi_early->call(pci->attributes, pci,
EfiPciIoAttributeOperationGet, 0, 0,
&attributes);
to invoke this UEFI protocol method:
typedef
EFI_STATUS
(EFIAPI *EFI_PCI_IO_PROTOCOL_ATTRIBUTES) (
IN EFI_PCI_IO_PROTOCOL *This,
IN EFI_PCI_IO_PROTOCOL_ATTRIBUTE_OPERATION Operation,
IN UINT64 Attributes,
OUT UINT64 *Result OPTIONAL
);
After the merge, we inadvertently ended up with this version for both
32-bit and 64-bit builds, breaking the latter.
So replace the two zeroes with the explicitly typed constant 0ULL,
which works as expected on both 32-bit and 64-bit builds.
Wilfried tested the 64-bit build, and I checked the generated assembly
of a 32-bit build with and without this patch, and they are identical.
Reported-by: Wilfried Klaebe <linux-kernel@lebenslange-mailadresse.de>
Tested-by: Wilfried Klaebe <linux-kernel@lebenslange-mailadresse.de>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: hdegoede@redhat.com
Cc: linux-efi@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Sat, 23 Jun 2018 22:33:54 +0000 (06:33 +0800)]
Merge tag 'for-linus-
20180623' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Further timeout fixes. We aren't quite there yet, so expect another
round of fixes for that to completely close some of the IRQ vs
completion races. (Christoph/Bart)
- Set of NVMe fixes from the usual suspects, mostly error handling
- Two off-by-one fixes (Dan)
- Another bdi race fix (Jan)
- Fix nbd reconfigure with NBD_DISCONNECT_ON_CLOSE (Doron)
* tag 'for-linus-
20180623' of git://git.kernel.dk/linux-block:
blk-mq: Fix timeout handling in case the timeout handler returns BLK_EH_DONE
bdi: Fix another oops in wb_workfn()
lightnvm: Remove depends on HAS_DMA in case of platform dependency
nvme-pci: limit max IO size and segments to avoid high order allocations
nvme-pci: move nvme_kill_queues to nvme_remove_dead_ctrl
nvme-fc: release io queues to allow fast fail
nbd: Add the nbd NBD_DISCONNECT_ON_CLOSE config flag.
block: sed-opal: Fix a couple off by one bugs
blk-mq-debugfs: Off by one in blk_mq_rq_state_name()
nvmet: reset keep alive timer in controller enable
nvme-rdma: don't override opts->queue_size
nvme-rdma: Fix command completion race at error recovery
nvme-rdma: fix possible free of a non-allocated async event buffer
nvme-rdma: fix possible double free condition when failing to create a controller
Revert "block: Add warning for bi_next not NULL in bio_endio()"
block: fix timeout changes for legacy request drivers
Linus Torvalds [Sat, 23 Jun 2018 22:31:54 +0000 (06:31 +0800)]
Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- Fix use after free in chtls
- Fix RBP breakage in sha3
- Fix use after free in hwrng_unregister
- Fix overread in morus640
- Move sleep out of kernel_neon in arm64/aes-blk
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
hwrng: core - Always drop the RNG in hwrng_unregister()
crypto: morus640 - Fix out-of-bounds access
crypto: don't optimize keccakf()
crypto: arm64/aes-blk - fix and move skcipher_walk_done out of kernel_neon_begin, _end
crypto: chtls - use after free in chtls_pt_recvmsg()
Linus Torvalds [Sat, 23 Jun 2018 22:26:19 +0000 (06:26 +0800)]
Merge tag 'linux-kselftest-4.18-rc2' of git://git./linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
- fix new sparc64 adi driver test compile errors on non-sparc systems
- fix config fragment for sync framework for improved test coverage
- fix several tests to return correct Kselftest skip code
* tag 'linux-kselftest-4.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: sparc64: Add missing SPDX License Identifiers
selftests: sparc64: delete RUN_TESTS and EMIT_TESTS overrides
selftests: sparc64: Fix to do nothing on non-sparc64
selftests: sync: add config fragment for testing sync framework
selftests: vm: return Kselftest Skip code for skipped tests
selftests: zram: return Kselftest Skip code for skipped tests
selftests: user: return Kselftest Skip code for skipped tests
selftests: sysctl: return Kselftest Skip code for skipped tests
selftests: static_keys: return Kselftest Skip code for skipped tests
selftests: pstore: return Kselftest Skip code for skipped tests
Linus Torvalds [Sat, 23 Jun 2018 22:23:28 +0000 (06:23 +0800)]
Merge tag 'trace-v4.18-rc1' of git://git./linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"This contains a few fixes and a clean up.
- a bad merge caused an "endif" to go in the wrong place in
scripts/Makefile.build
- softirq tracing fix for tracing that corrupts lockdep and causes a
false splat
- histogram documentation typo fixes
- fix a bad memory reference when passing in no filter to the filter
code
- simplify code by using the swap macro instead of open coding the
swap"
* tag 'trace-v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix SKIP_STACK_VALIDATION=1 build due to bad merge with -mrecord-mcount
tracing: Fix some errors in histogram documentation
tracing: Use swap macro in update_max_tr
softirq: Reorder trace_softirqs_on to prevent lockdep splat
tracing: Check for no filter when processing event filters
Bart Van Assche [Fri, 22 Jun 2018 20:18:09 +0000 (13:18 -0700)]
blk-mq: Fix timeout handling in case the timeout handler returns BLK_EH_DONE
Make sure that RQF_TIMED_OUT is cleared when a request is reused
after a block driver timeout handler has returned BLK_EH_DONE.
Fixes:
da6612673988 ("blk-mq: don't time out requests again that are in the timeout handler")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jianchao Wang <jianchao.w.wang@oracle.com>
Cc: Andrew Randrianasulu <randrianasulu@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Sat, 23 Jun 2018 13:13:05 +0000 (21:13 +0800)]
Merge tag 'powerpc-4.18-2' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- a fix for hugetlb with 4K pages, broken by our recent changes for
split PMD PTL.
- set the correct assembler machine type on e500mc, needed since
binutils 2.26 introduced two forms for the "wait" instruction.
- a fix for potential missed TLB flushes with MADV_[FREE|DONTNEED] etc.
and THP on Power9 Radix.
- three fixes to try and make our panic handling more robust by hard
disabling interrupts, and not marking stopped CPUs as offline because
they haven't been properly offlined.
- three other minor fixes.
Thanks to: Aneesh Kumar K.V, Michael Jeanson, Nicholas Piggin.
* tag 'powerpc-4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/mm/hash/4k: Free hugetlb page table caches correctly.
powerpc/64s/radix: Fix radix_kvm_prefetch_workaround paca access of not possible CPU
powerpc/64s: Fix build failures with CONFIG_NMI_IPI=n
powerpc/64: hard disable irqs on the panic()ing CPU
powerpc: smp_send_stop do not offline stopped CPUs
powerpc/64: hard disable irqs in panic_smp_self_stop
powerpc/64s: Fix DT CPU features Power9 DD2.1 logic
powerpc/64s/radix: Fix MADV_[FREE|DONTNEED] TLB flush miss problem with THP
powerpc/e500mc: Set assembler machine type to e500mc
Linus Torvalds [Sat, 23 Jun 2018 13:07:43 +0000 (21:07 +0800)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- clear buffers allocated with FORCE_CONTIGUOUS explicitly until the
CMA code honours __GFP_ZERO
- notrace annotation for secondary_start_kernel()
- use early_param() instead of __setup() for "kpti=" as it is needed
for the cpufeature callback remapping swapper to non-global mappings
- ensure writes to swapper are ordered wrt subsequent cache maintenance
in the kpti non-global remapping code
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mm: Ensure writes to swapper are ordered wrt subsequent cache maintenance
arm64: kpti: Use early_param for kpti= command-line option
arm64: make secondary_start_kernel() notrace
arm64: dma-mapping: clear buffers allocated with FORCE_CONTIGUOUS flag
Linus Torvalds [Sat, 23 Jun 2018 12:59:00 +0000 (20:59 +0800)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
"ARM:
- Lazy FPSIMD switching fixes
- Really disable compat ioctls on architectures that don't want it
- Disable compat on arm64 (it was never implemented...)
- Rely on architectural requirements for GICV on GICv3
- Detect bad alignments in unmap_stage2_range
x86:
- Add nested VM entry checks to avoid broken error recovery path
- Minor documentation fix"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: fix KVM_CAP_HYPERV_TLBFLUSH paragraph number
kvm: vmx: Nested VM-entry prereqs for event inj.
KVM: arm64: Prevent KVM_COMPAT from being selected
KVM: Enforce error in ioctl for compat tasks when !KVM_COMPAT
KVM: arm/arm64: add WARN_ON if size is not PAGE_SIZE aligned in unmap_stage2_range
KVM: arm64: Avoid mistaken attempts to save SVE state for vcpus
KVM: arm64/sve: Fix SVE trap restoration for non-current tasks
KVM: arm64: Don't mask softirq with IRQs disabled in vcpu_put()
arm64: Introduce sysreg_clear_set()
KVM: arm/arm64: Drop resource size check for GICV window
Linus Torvalds [Sat, 23 Jun 2018 12:44:11 +0000 (20:44 +0800)]
Merge tag 'for-linus-4.18-rc2-tag' of git://git./linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"This contains the following fixes/cleanups:
- the removal of a BUG_ON() which wasn't necessary and which could
trigger now due to a recent change
- a correction of a long standing bug happening very rarely in Xen
dom0 when a hypercall buffer from user land was not accessible by
the hypervisor for very short periods of time due to e.g. page
migration or compaction
- usage of EXPORT_SYMBOL_GPL() instead of EXPORT_SYMBOL() in a
Xen-related driver (no breakage possible as using those symbols
without others already exported via EXPORT-SYMBOL_GPL() wouldn't
make any sense)
- a simplification for Xen PVH or Xen ARM guests
- some additional error handling for callers of xenbus_printf()"
* tag 'for-linus-4.18-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: Remove unnecessary BUG_ON from __unbind_from_irq()
xen: add new hypercall buffer mapping device
xen/scsiback: add error handling for xenbus_printf
scsi: xen-scsifront: add error handling for xenbus_printf
xen/grant-table: Export gnttab_{alloc|free}_pages as GPL
xen: add error handling for xenbus_printf
xen: share start flags between PV and PVH
Kirill A. Shutemov [Fri, 22 Jun 2018 22:08:41 +0000 (01:08 +0300)]
x86/mm: Fix 'no5lvl' handling
early_identify_cpu() has to use early version of pgtable_l5_enabled()
that doesn't rely on cpu_feature_enabled().
Defining USE_EARLY_PGTABLE_L5 before all includes does the trick.
I lost the define in one of reworks of the original patch.
Fixes:
372fddf70904 ("x86/mm: Introduce the 'no5lvl' kernel parameter")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lkml.kernel.org/r/20180622220841.54135-3-kirill.shutemov@linux.intel.com
Kirill A. Shutemov [Fri, 22 Jun 2018 22:08:40 +0000 (01:08 +0300)]
Revert "x86/mm: Mark __pgtable_l5_enabled __initdata"
This reverts commit
e4e961e36f063484c48bed919013c106d178995d.
We need to use early version of pgtable_l5_enabled() in
early_identify_cpu() as this code runs before cpu_feature_enabled() is
usable.
But it leads to section mismatch:
cpu_init()
load_mm_ldt()
ldt_slot_va()
LDT_BASE_ADDR
LDT_PGD_ENTRY
pgtable_l5_enabled()
__pgtable_l5_enabled
__pgtable_l5_enabled marked as __initdata, but cpu_init() is not __init.
It's fixable: early code can be isolated into a separate translation unit,
but such change collides with other work in the area. That's too much
hassle to save 4 bytes of memory.
Return __pgtable_l5_enabled back to be __ro_after_init.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lkml.kernel.org/r/20180622220841.54135-2-kirill.shutemov@linux.intel.com
Suravee Suthikulpanit [Wed, 13 Jun 2018 18:43:10 +0000 (13:43 -0500)]
x86/CPU/AMD: Fix LLC ID bit-shift calculation
The current logic incorrectly calculates the LLC ID from the APIC ID.
Unless specified otherwise, the LLC ID should be calculated by removing
the Core and Thread ID bits from the least significant end of the APIC
ID. For more info, see "ApicId Enumeration Requirements" in any Fam17h
PPR document.
[ bp: Improve commit message. ]
Fixes:
68091ee7ac3c ("Calculate last level cache ID from number of sharing threads")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1528915390-30533-1-git-send-email-suravee.suthikulpanit@amd.com
Thomas Gleixner [Fri, 22 Jun 2018 19:20:35 +0000 (21:20 +0200)]
Merge branch 'linus' into x86/urgent
Required to queue a dependent fix.
Jan Kara [Mon, 18 Jun 2018 13:46:58 +0000 (15:46 +0200)]
bdi: Fix another oops in wb_workfn()
syzbot is reporting NULL pointer dereference at wb_workfn() [1] due to
wb->bdi->dev being NULL. And Dmitry confirmed that wb->state was
WB_shutting_down after wb->bdi->dev became NULL. This indicates that
unregister_bdi() failed to call wb_shutdown() on one of wb objects.
The problem is in cgwb_bdi_unregister() which does cgwb_kill() and thus
drops bdi's reference to wb structures before going through the list of
wbs again and calling wb_shutdown() on each of them. This way the loop
iterating through all wbs can easily miss a wb if that wb has already
passed through cgwb_remove_from_bdi_list() called from wb_shutdown()
from cgwb_release_workfn() and as a result fully shutdown bdi although
wb_workfn() for this wb structure is still running. In fact there are
also other ways cgwb_bdi_unregister() can race with
cgwb_release_workfn() leading e.g. to use-after-free issues:
CPU1 CPU2
cgwb_bdi_unregister()
cgwb_kill(*slot);
cgwb_release()
queue_work(cgwb_release_wq, &wb->release_work);
cgwb_release_workfn()
wb = list_first_entry(&bdi->wb_list, ...)
spin_unlock_irq(&cgwb_lock);
wb_shutdown(wb);
...
kfree_rcu(wb, rcu);
wb_shutdown(wb); -> oops use-after-free
We solve these issues by synchronizing writeback structure shutdown from
cgwb_bdi_unregister() with cgwb_release_workfn() using a new mutex. That
way we also no longer need synchronization using WB_shutting_down as the
mutex provides it for CONFIG_CGROUP_WRITEBACK case and without
CONFIG_CGROUP_WRITEBACK wb_shutdown() can be called only once from
bdi_unregister().
Reported-by: syzbot <syzbot+4a7438e774b21ddd8eca@syzkaller.appspotmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Geert Uytterhoeven [Fri, 22 Jun 2018 11:05:35 +0000 (13:05 +0200)]
lightnvm: Remove depends on HAS_DMA in case of platform dependency
Remove dependencies on HAS_DMA where a Kconfig symbol depends on another
symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST".
In most cases this other symbol is an architecture or platform specific
symbol, or PCI.
Generic symbols and drivers without platform dependencies keep their
dependencies on HAS_DMA, to prevent compiling subsystems or drivers that
cannot work anyway.
This simplifies the dependencies, and allows to improve compile-testing.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Will Deacon [Fri, 22 Jun 2018 10:45:07 +0000 (11:45 +0100)]
rseq: Avoid infinite recursion when delivering SIGSEGV
When delivering a signal to a task that is using rseq, we call into
__rseq_handle_notify_resume() so that the registers pushed in the
sigframe are updated to reflect the state of the restartable sequence
(for example, ensuring that the signal returns to the abort handler if
necessary).
However, if the rseq management fails due to an unrecoverable fault when
accessing userspace or certain combinations of RSEQ_CS_* flags, then we
will attempt to deliver a SIGSEGV. This has the potential for infinite
recursion if the rseq code continuously fails on signal delivery.
Avoid this problem by using force_sigsegv() instead of force_sig(), which
is explicitly designed to reset the SEGV handler to SIG_DFL in the case
of a recursive fault. In doing so, remove rseq_signal_deliver() from the
internal rseq API and have an optional struct ksignal * parameter to
rseq_handle_notify_resume() instead.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: peterz@infradead.org
Cc: paulmck@linux.vnet.ibm.com
Cc: boqun.feng@gmail.com
Link: https://lkml.kernel.org/r/1529664307-983-1-git-send-email-will.deacon@arm.com
Will Deacon [Fri, 22 Jun 2018 15:23:45 +0000 (16:23 +0100)]
arm64: mm: Ensure writes to swapper are ordered wrt subsequent cache maintenance
When rewriting swapper using nG mappings, we must performance cache
maintenance around each page table access in order to avoid coherency
problems with the host's cacheable alias under KVM. To ensure correct
ordering of the maintenance with respect to Device memory accesses made
with the Stage-1 MMU disabled, DMBs need to be added between the
maintenance and the corresponding memory access.
This patch adds a missing DMB between writing a new page table entry and
performing a clean+invalidate on the same line.
Fixes:
f992b4dfd58b ("arm64: kpti: Add ->enable callback to remap swapper using nG mappings")
Cc: <stable@vger.kernel.org> # 4.16.x-
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Will Deacon [Fri, 22 Jun 2018 09:25:25 +0000 (10:25 +0100)]
arm64: kpti: Use early_param for kpti= command-line option
We inspect __kpti_forced early on as part of the cpufeature enable
callback which remaps the swapper page table using non-global entries.
Ensure that __kpti_forced has been updated to reflect the kpti=
command-line option before we start using it.
Fixes:
ea1e3de85e94 ("arm64: entry: Add fake CPU feature for unmapping the kernel at EL0")
Cc: <stable@vger.kernel.org> # 4.16.x-
Reported-by: Wei Xu <xuwei5@hisilicon.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Geert Uytterhoeven [Fri, 22 Jun 2018 10:08:20 +0000 (12:08 +0200)]
MAINTAINERS: Add file patterns for x86 device tree bindings
Submitters of device tree binding documentation may forget to CC
the subsystem maintainer if this is missing.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Link: https://lkml.kernel.org/r/20180622100820.29616-1-geert@linux-m68k.org
Geert Uytterhoeven [Fri, 22 Jun 2018 14:33:57 +0000 (16:33 +0200)]
time: Make sure jiffies_to_msecs() preserves non-zero time periods
For the common cases where 1000 is a multiple of HZ, or HZ is a multiple of
1000, jiffies_to_msecs() never returns zero when passed a non-zero time
period.
However, if HZ > 1000 and not an integer multiple of 1000 (e.g. 1024 or
1200, as used on alpha and DECstation), jiffies_to_msecs() may return zero
for small non-zero time periods. This may break code that relies on
receiving back a non-zero value.
jiffies_to_usecs() does not need such a fix: one jiffy can only be less
than one µs if HZ >
1000000, and such large values of HZ are already
rejected at build time, twice:
- include/linux/jiffies.h does #error if HZ >= 12288,
- kernel/time/time.c has BUILD_BUG_ON(HZ > USEC_PER_SEC).
Broken since forever.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-alpha@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180622143357.7495-1-geert@linux-m68k.org
Vitaly Kuznetsov [Fri, 22 Jun 2018 14:56:14 +0000 (16:56 +0200)]
KVM: fix KVM_CAP_HYPERV_TLBFLUSH paragraph number
KVM_CAP_HYPERV_TLBFLUSH collided with KVM_CAP_S390_PSW-BPB, its paragraph
number should now be 8.18.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Marc Orr [Thu, 21 Jun 2018 00:21:29 +0000 (17:21 -0700)]
kvm: vmx: Nested VM-entry prereqs for event inj.
This patch extends the checks done prior to a nested VM entry.
Specifically, it extends the check_vmentry_prereqs function with checks
for fields relevant to the VM-entry event injection information, as
described in the Intel SDM, volume 3.
This patch is motivated by a syzkaller bug, where a bad VM-entry
interruption information field is generated in the VMCS02, which causes
the nested VM launch to fail. Then, KVM fails to resume L1.
While KVM should be improved to correctly resume L1 execution after a
failed nested launch, this change is justified because the existing code
to resume L1 is flaky/ad-hoc and the test coverage for resuming L1 is
sparse.
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Marc Orr <marcorr@google.com>
[Removed comment whose parts were describing previous revisions and the
rest was obvious from function/variable naming. - Radim]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Jens Axboe [Fri, 22 Jun 2018 14:45:29 +0000 (08:45 -0600)]
Merge branch 'nvme-4.18' of git://git.infradead.org/nvme into for-linus
Pull NVMe fixes from Christoph:
"Various relatively small fixes, mostly to fix error handling of various
sorts."
* 'nvme-4.18' of git://git.infradead.org/nvme:
nvme-pci: limit max IO size and segments to avoid high order allocations
nvme-pci: move nvme_kill_queues to nvme_remove_dead_ctrl
nvme-fc: release io queues to allow fast fail
nvmet: reset keep alive timer in controller enable
nvme-rdma: don't override opts->queue_size
nvme-rdma: Fix command completion race at error recovery
nvme-rdma: fix possible free of a non-allocated async event buffer
nvme-rdma: fix possible double free condition when failing to create a controller
Radim Krčmář [Fri, 22 Jun 2018 12:56:19 +0000 (14:56 +0200)]
Merge tag 'kvmarm-fixes-for-4.18-1' of git://git./linux/kernel/git/kvmarm/kvmarm
KVM/arm fixes for 4.18, take #1
- Lazy FPSIMD switching fixes
- Really disable compat ioctls on architectures that don't want it
- Disable compat on arm64 (it was never implemented...)
- Rely on architectural requirements for GICV on GICv3
- Detect bad alignments in unmap_stage2_range
Zhenzhong Duan [Fri, 22 Jun 2018 11:51:26 +0000 (13:51 +0200)]
x86/microcode/intel: Fix memleak in save_microcode_patch()
Free useless ucode_patch entry when it's replaced.
[ bp: Drop the memfree_patch() two-liner. ]
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Srinivas REDDY Eeda <srinivas.eeda@oracle.com>
Link: http://lkml.kernel.org/r/888102f0-fd22-459d-b090-a1bd8a00cb2b@default
Tony Luck [Fri, 22 Jun 2018 09:54:23 +0000 (11:54 +0200)]
x86/mce: Fix incorrect "Machine check from unknown source" message
Some injection testing resulted in the following console log:
mce: [Hardware Error]: CPU 22: Machine Check Exception: f Bank 1:
bd80000000100134
mce: [Hardware Error]: RIP 10:<
ffffffffc05292dd> {pmem_do_bvec+0x11d/0x330 [nd_pmem]}
mce: [Hardware Error]: TSC
c51a63035d52 ADDR
3234bc4000 MISC 88
mce: [Hardware Error]: PROCESSOR 0:50654 TIME
1526502199 SOCKET 0 APIC 38 microcode
2000043
mce: [Hardware Error]: Run the above through 'mcelog --ascii'
Kernel panic - not syncing: Machine check from unknown source
This confused everybody because the first line quite clearly shows
that we found a logged error in "Bank 1", while the last line says
"unknown source".
The problem is that the Linux code doesn't do the right thing
for a local machine check that results in a fatal error.
It turns out that we know very early in the handler whether the
machine check is fatal. The call to mce_no_way_out() has checked
all the banks for the CPU that took the local machine check. If
it says we must crash, we can do so right away with the right
messages.
We do scan all the banks again. This means that we might initially
not see a problem, but during the second scan find something fatal.
If this happens we print a slightly different message (so I can
see if it actually every happens).
[ bp: Remove unneeded severity assignment. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: stable@vger.kernel.org # 4.2
Link: http://lkml.kernel.org/r/52e049a497e86fd0b71c529651def8871c804df0.1527283897.git.tony.luck@intel.com
Borislav Petkov [Fri, 22 Jun 2018 09:54:28 +0000 (11:54 +0200)]
x86/mce: Do not overwrite MCi_STATUS in mce_no_way_out()
mce_no_way_out() does a quick check during #MC to see whether some of
the MCEs logged would require the kernel to panic immediately. And it
passes a struct mce where MCi_STATUS gets written.
However, after having saved a valid status value, the next iteration
of the loop which goes over the MCA banks on the CPU, overwrites the
valid status value because we're using struct mce as storage instead of
a temporary variable.
Which leads to MCE records with an empty status value:
mce: [Hardware Error]: CPU 0: Machine Check Exception: 6 Bank 0:
0000000000000000
mce: [Hardware Error]: RIP 10:<
ffffffffbd42fbd7> {trigger_mce+0x7/0x10}
In order to prevent the loss of the status register value, return
immediately when severity is a panic one so that we can panic
immediately with the first fatal MCE logged. This is also the intention
of this function and not to noodle over the banks while a fatal MCE is
already logged.
Tony: read the rest of the MCA bank to populate the struct mce fully.
Suggested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20180622095428.626-8-bp@alien8.de
John Garry [Fri, 22 Jun 2018 11:35:33 +0000 (19:35 +0800)]
irqdesc: Delete irq_desc_get_msi_desc()
Function irq_desc_get_msi_desc() is not referenced in the kernel (and does
not seem to have been referenced since
e39758e0ea76, 3 years ago), so
delete it.
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <marc.zyngier@arm.com>
Cc: <will.deacon@arm.com>
Cc: <kstewart@linuxfoundation.org>
Cc: <julien.thierry@arm.com>
Cc: <andrew@lunn.ch>
Cc: <trivial@kernel.org>
Link: https://lkml.kernel.org/r/1529667333-92959-1-git-send-email-john.garry@huawei.com
Marc Zyngier [Fri, 22 Jun 2018 09:52:54 +0000 (10:52 +0100)]
irqchip/gic-v3-its: Fix reprogramming of redistributors on CPU hotplug
Enabling LPIs was made a lot stricter recently, by checking that they are
disabled before enabling them. By doing so, the CPU hotplug case was missed
altogether, which leaves LPIs enabled on hotplug off (expecting the CPU to
eventually come back), and won't write a different value anyway on hotplug
on.
So skip that check if that particular case is detected
Fixes:
6eb486b66a30 ("irqchip/gic-v3: Ensure GICR_CTLR.EnableLPI=0 is observed before enabling")
Reported-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lkml.kernel.org/r/20180622095254.5906-8-marc.zyngier@arm.com
Marc Zyngier [Fri, 22 Jun 2018 09:52:53 +0000 (10:52 +0100)]
irqchip/gic-v3-its: Only emit VSYNC if targetting a valid collection
Similarily to the SYNC operation, it must be verified that the VPE
targetted by a VLPI is backed by a valid collection in the GIC driver data
structures.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Yang Yingliang <yangyingliang@huawei.com>
Cc: Sumit Garg <sumit.garg@linaro.org>
Link: https://lkml.kernel.org/r/20180622095254.5906-7-marc.zyngier@arm.com
Marc Zyngier [Fri, 22 Jun 2018 09:52:52 +0000 (10:52 +0100)]
irqchip/gic-v3-its: Only emit SYNC if targetting a valid collection
It is possible, under obscure circumstances, to convince the ITS driver to
emit a SYNC operation that targets a collection that is not bound to any
redistributor (and the target_address field is zero) because the
corresponding CPU has not been seen yet (the system has been booted with
max_cpus="something small").
If the ITS is using the linear CPU number as the target, this is not a big
deal, as we just end-up issuing a SYNC to CPU0. But if the ITS requires the
physical address of the redistributor (with GITS_TYPER.PTA==1), we end-up
asking the ITS to write to the physical address zero, which is not exactly
a good idea (there has been report of the ITS locking up). This should of
course never happen, but hey, this is SW...
In order to avoid the above disaster, let's track which collections have
been actually initialized, and let's not generate a SYNC if the collection
hasn't been properly bound to a redistributor. Take this opportunity to
spit our a warning, in the hope that someone may report the issue if it
arrises again.
Reported-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Sumit Garg <sumit.garg@linaro.org>
Link: https://lkml.kernel.org/r/20180622095254.5906-6-marc.zyngier@arm.com
Yang Yingliang [Fri, 22 Jun 2018 09:52:51 +0000 (10:52 +0100)]
irqchip/gic-v3-its: Don't bind LPI to unavailable NUMA node
On a NUMA system, if an ITS is local to an offline node, the ITS driver may
pick an offline CPU to bind the LPI. In this case, pick an online CPU (and
the first one will do).
But on some systems, binding an LPI to non-local node CPU may cause
deadlock (see Cavium erratum 23144). In this case, just fail the activate
and return an error code.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Sumit Garg <sumit.garg@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180622095254.5906-5-marc.zyngier@arm.com
Marc Zyngier [Fri, 22 Jun 2018 09:52:50 +0000 (10:52 +0100)]
irqchip/gic-v2m: Fix SPI release on error path
On failing to allocate the required SPIs, the actual number of interrupts
should be freed and not its log2 value.
Fixes:
de337ee30142 ("irqchip/gic-v2m: Add PCI Multi-MSI support")
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Yang Yingliang <yangyingliang@huawei.com>
Cc: Sumit Garg <sumit.garg@linaro.org>
Link: https://lkml.kernel.org/r/20180622095254.5906-4-marc.zyngier@arm.com
Marc Zyngier [Fri, 22 Jun 2018 09:52:49 +0000 (10:52 +0100)]
irqchip/ls-scfg-msi: Fix MSI affinity handling
The ls-scfs-msi driver is not dealing with the effective affinity
as it should. Let's fix that, and make it clear that the effective
affinity is restricted to a single CPU. Also prevent the driver from
messing with the internals of the affinity setting infrastructure.
Reported-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Yang Yingliang <yangyingliang@huawei.com>
Cc: Sumit Garg <sumit.garg@linaro.org>
Link: https://lkml.kernel.org/r/20180622095254.5906-3-marc.zyngier@arm.com