OSDN Git Service
Anton Khirnov [Mon, 24 Nov 2014 10:16:46 +0000 (11:16 +0100)]
opusdec: make sure all substreams have the same number of coded samples
Fixes invalid writes with invalid multichannel streams.
CC:libav-stable@libav.org
Kieran Kunhya [Tue, 25 Nov 2014 16:14:32 +0000 (17:14 +0100)]
vf_interlace: get rid of useless loads
Signed-off-by: Anton Khirnov <anton@khirnov.net>
wm4 [Fri, 14 Nov 2014 12:34:50 +0000 (13:34 +0100)]
lavu: fix memory leaks by using a mutex instead of atomics
The buffer pool has to atomically add and remove entries from the linked
list of available buffers. This was done by removing the entire list
with a CAS operation, working on it, and then setting it back again
(using a retry-loop in case another thread was doing the same thing).
This could effectively cause memory leaks: while a thread was working on
the buffer list, other threads would allocate new buffers, increasing
the pool's total size. There was no real leak, but since these extra
buffers were not needed, but not free'd either (except when the buffer
pool was destroyed), this had the same effects as a real leak. For some
reason, growth was exponential, and could easily kill the process due
to OOM in real-world uses.
Fix this by using a mutex to protect the list operations. The fancy
way atomics remove the whole list to work on it is not needed anymore,
which also avoids the situation which was causing the leak.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Anton Khirnov [Sun, 23 Nov 2014 20:25:05 +0000 (21:25 +0100)]
lavu: add wrappers for the pthreads mutex API
Also add no-op fallbacks when threading is disabled.
This helps keeping the code clean if Libav is compiled for targets
without threading. Since we assume that no threads of any kind are used
in such configurations, doing nothing is ok by definition.
Based on a patch by wm4 <nfxjfg@googlemail.com>.
Martin Storsjö [Tue, 25 Nov 2014 08:51:23 +0000 (10:51 +0200)]
Revert "lavf: Don't try to update files atomically with renames on windows"
This reverts commit
b9d08c77a44390b0848c06f20bc0e9e951ba6a3c.
After taking MoveFileEx into use, we can replace files with renames
on windows as well.
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Tue, 25 Nov 2014 09:08:59 +0000 (11:08 +0200)]
lavf: Use MoveFileEx instead of rename/_wrename on windows
This allows getting the normal unix semantics, where a rename
allows replacing an existing file.
Based on a suggestion by Reimar Döffinger.
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Tue, 25 Nov 2014 08:39:50 +0000 (10:39 +0200)]
Share the utf8 to wchar conversion routine between lavf and lavu
This doesn't add any dependency on library internals, since this
only is a static inline function that gets built into each of the
calling functions - this is only to reduce the code duplication.
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Mon, 3 Nov 2014 20:38:09 +0000 (22:38 +0200)]
movenc: Expose the fragment index as an avoption
This allows setting the right fragment number if doing
random-access writing of fragments, and also allows reading the
current sequence number.
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Thu, 20 Nov 2014 07:51:05 +0000 (09:51 +0200)]
movenc: Add a flag for indicating a discontinuous fragment
This allows creating a later mp4 fragment without sequentially
writing the earlier ones before (when called from a segmenter).
Normally when writing a fragmented mp4 file sequentially, the
first timestamps of a fragment are adjusted to match the
end of the previous fragment, to make sure the timestamp is the
same, even if it is calculated as the sum of previous fragment
durations. (And for the first packet in a file, the offset of
the first packet is written using an edit list.)
When writing an individual mp4 fragment discontinuously like this
(with potentially writing the earlier fragments separately later),
there's a risk of getting a gap in the timeline if the duration
field of the last packet in the previous fragment doesn't match up
with the start time of the next fragment.
Using this requires setting -avoid_negative_ts make_non_negative
(or -avoid_negative_ts 0).
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Tue, 25 Nov 2014 08:43:55 +0000 (10:43 +0200)]
vorbis_parser: Include stdint.h in the header, to make it work standalone
This fixes "make checkheaders".
Signed-off-by: Martin Storsjö <martin@martin.st>
Michael Niedermayer [Sat, 15 Nov 2014 03:07:08 +0000 (04:07 +0100)]
vf_interlace: x86: improve asm performance
4775 decicycles -> 3688 decicycles
Michael Niedermayer [Wed, 12 Nov 2014 10:13:08 +0000 (11:13 +0100)]
hnm4: change width/height to int to fix hypothetical integer overflows
CC: libav-stable@libav.org
Bug-Id: CID
1135770 / CID
1135771
Luca Barbato [Mon, 24 Nov 2014 00:04:39 +0000 (01:04 +0100)]
hnm4: Use av_image_check_size
As done for all the other codecs not calling it indirectly.
CC: libav-stable@libav.org
Bug-Id: CID
1135770 / CID
1135771
Michael Niedermayer [Sun, 23 Nov 2014 23:44:48 +0000 (00:44 +0100)]
vc1: Use the correct shift amount
`is_intra` is a 6bits bitfield.
CC: libav-stable@libav.org
Bug-Id: CID
1194380 / CID
1194381
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Luca Barbato [Sun, 23 Nov 2014 23:44:47 +0000 (00:44 +0100)]
vc1: Set the is_intra bitfield to all 1 when needed
Keep the code as similar as possible across the codepaths to
ease spotting it for factorization.
Based on a patch from Michael Niedermayer <michaelni@gmx.at>.
Luca Barbato [Sun, 23 Nov 2014 23:44:46 +0000 (00:44 +0100)]
vc1: Simplify a little setting the intra variables
The code currently set the information in at least 4 places, spare
some pointless loops.
Make the code in the loop a little uniform to make easier factorize
it out later.
Michael Niedermayer [Mon, 24 Nov 2014 15:48:27 +0000 (15:48 +0000)]
vorbis_parser: Move vp check to avoid a null pointer dereference
CC: libav-stable@libav.org
Bug-Id: CID
1251347
Michael Niedermayer [Mon, 24 Nov 2014 16:06:00 +0000 (16:06 +0000)]
lpc: remove unneeded {}
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Vittorio Giovara [Mon, 24 Nov 2014 01:38:53 +0000 (01:38 +0000)]
vc1pred: remove logically dead code
CC: libav-stable@libav.org
Bug-Id: CID
1245699 / CID
1245700
Martin Storsjö [Mon, 17 Nov 2014 21:08:15 +0000 (23:08 +0200)]
lavf: Use wchar functions for filenames on windows for mkdir/rmdir/rename/unlink
This makes sure that the internal utf8 path names are handled
properly - the normal file handling functions assume path names
are in the native codepage, which isn't utf8.
This assumes that the tools outside of lavf don't use the mkdir
definition. (The tools don't do the same reading of command line
parameters as wchar either - they probably won't handle all possible
unicode file parameters properly, but at least work more predictably
if no utf8/wchar conversion is involved.)
This is moved further down in os_support.h, since windows.h shouldn't
be included before winsock2.h, while io.h needs to be included before
the manual defines for lseek functions.
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Tue, 18 Nov 2014 12:06:19 +0000 (14:06 +0200)]
lavf: Don't try to update files atomically with renames on windows
On windows, rename(2) will fail if the target file exists. On
unix this trick is used to make sure that people reading the file
either will get the full previous file, or the full new version
of the file, but no intermediate version.
Signed-off-by: Martin Storsjö <martin@martin.st>
Uwe L. Korn [Sun, 23 Nov 2014 18:36:14 +0000 (19:36 +0100)]
flvdec: Document how the duration is retrieved at the end of the file
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Mon, 17 Nov 2014 13:26:17 +0000 (15:26 +0200)]
dashenc: Don't segment all video streams when one stream gets a keyframe
This makes sure that segments actually start at a keyframe (and
makes sure we don't split segments twice in a row, with one segment
consisting of only a handful of packets), when one stream uses b-frames
while another one doesn't.
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Sun, 23 Nov 2014 15:30:35 +0000 (17:30 +0200)]
sidxindex: Write mimeType=audio/mp4 for audio-only representations
This fixes playback with dash.js, when the input is one separate
mp4 file per track.
Signed-off-by: Martin Storsjö <martin@martin.st>
Vittorio Giovara [Fri, 21 Nov 2014 12:57:37 +0000 (12:57 +0000)]
aacsbr: always initialize max_qmf_subbands
Fixes a wordly warning from clang -Wsometimes-uninitialized.
Michael Niedermayer [Wed, 12 Nov 2014 10:13:10 +0000 (11:13 +0100)]
roqaudio: Always use the frame buffer on flush
Prevent NULL dereference.
CC: libav-stable@libav.org
Bug-Id: CID 703669
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Vittorio Giovara [Sun, 9 Nov 2014 07:48:43 +0000 (08:48 +0100)]
tiffenc: initialize return value
'ret' can only be used without initialization if s->height <= 0, which can
only happen if avctx->height <= 0, which is validated elsewhere. Doesn't hurt
to still initialize it though.
CC: libav-stable@libav.org
Bug-Id: CID 732296
Luca Barbato [Sun, 23 Nov 2014 15:09:05 +0000 (16:09 +0100)]
cook: Make sure there is enough extradata
At least 8 bytes are needed (Mono audio).
Bug-Id: CID 741418
CC: libav-stable@libav.org
Vittorio Giovara [Fri, 21 Nov 2014 12:57:35 +0000 (12:57 +0000)]
sol: simplify sol_codec_id()
Bug-Id: CID
1238993
Vittorio Giovara [Fri, 21 Nov 2014 12:57:40 +0000 (12:57 +0000)]
aacdec: avoid an out-of-bounds write
Also move the check in the case it is actually used.
CC: libav-stable@libav.org
Bug-Id: CID
1087090
Vittorio Giovara [Fri, 21 Nov 2014 12:57:43 +0000 (12:57 +0000)]
lavu: move internal define to the only places where it is used
Vittorio Giovara [Fri, 21 Nov 2014 12:57:42 +0000 (12:57 +0000)]
mpegenc: prevent a NULL pointer dereference
CC: libav-stable@libav.org
Bug-Id: CID 29261
Vittorio Giovara [Fri, 21 Nov 2014 12:57:41 +0000 (12:57 +0000)]
motion_est: convert stride to ptrdiff_t
CC: libav-stable@libav.org
Bug-Id: CID 700556 / CID 700557 / CID 700558
Martin Storsjö [Wed, 19 Nov 2014 11:49:31 +0000 (13:49 +0200)]
dashenc: Don't require the stream bitrate to be known
Don't write any bitrate attribute if it isn't known. As long as one
doesn't want automatic bitrate switching, playback can work just
fine even if it isn't set.
If strict standard compliance is requested, this is still considered
an error, since the attribute is mandatory according to the spec.
Based on a patch by Rodger Combs.
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Tue, 18 Nov 2014 07:57:07 +0000 (09:57 +0200)]
lavf: Remove a redundant include of sys/stat.h
The same file already includes this header a few lines further
above.
Signed-off-by: Martin Storsjö <martin@martin.st>
Michael Niedermayer [Mon, 17 Nov 2014 12:08:05 +0000 (13:08 +0100)]
flvenc: Remove an unused variable
Signed-off-by: Martin Storsjö <martin@martin.st>
Luca Barbato [Sun, 16 Nov 2014 10:29:41 +0000 (11:29 +0100)]
hevc: Spin the mv_mpv_mode calls in a stand alone function
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Vittorio Giovara [Wed, 12 Nov 2014 18:10:44 +0000 (19:10 +0100)]
qdm2: avoid integer overflow
CC: libav-stable@libav.org
Bug-Id: CID 700555
Luca Barbato [Tue, 11 Nov 2014 12:27:01 +0000 (13:27 +0100)]
vp9: Use the correct upper bound for seg_id
And use a macro to make apparent why the value.
Bug-Id: CID
1108595
Luca Barbato [Sun, 9 Nov 2014 07:48:47 +0000 (08:48 +0100)]
dvdsubdec: Do not leak on failure path
CC: libav-stable@libav.org
Bug-Id: CID
1198262
Vittorio Giovara [Fri, 21 Nov 2014 11:56:59 +0000 (11:56 +0000)]
libtwolame: prevent a NULL pointer dereference
CC: libav-stable@libav.org
Bug-Id: CID
1250330 / CID
1250335
Vittorio Giovara [Sun, 16 Nov 2014 23:22:20 +0000 (00:22 +0100)]
lavfi: clean memory on error in ADD_FORMAT()
CC: libav-stable@libav.org
Bug-Id: CID
1250334
Luca Barbato [Sun, 16 Nov 2014 23:22:21 +0000 (00:22 +0100)]
xwma: Do not leak on failure path
CC: libav-stable@libav.org
Bug-Id: CID
1087092
Martin Storsjö [Fri, 21 Nov 2014 12:23:02 +0000 (14:23 +0200)]
lavc: Move the libtwolame encoder registration to the list for external libraries
This makes sure the default behaviour of using the internal encoder
stays the same regardless if libtwolame is enabled or not (as for
any external library).
This fixes fate-lavf-mpg if libav is built with libtwolame enabled.
CC: libav-stable@libav.org
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Martin Storsjö [Tue, 18 Nov 2014 12:28:50 +0000 (14:28 +0200)]
hdsenc: Clear the previous codec tag when setting up the chained muxer
The chained flv muxer wants one set of tags - normally this set
could be signaled via the AVOutputFormat codec_tag field (as
smoothstreamingenc and dashenc do). hdsenc doesn't signal it, since
the FLV codec tag arrays aren't exported from flvenc.c. This can
lead to the caller keeping an original codec tag from the originating
container here, which would then be a mismatch for the FLV muxer.
Since we don't really care about what codec tag the caller might
have set, just clear it and let the lavf muxer layer set the right
one for the chained FLV muxer later instead.
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Tue, 18 Nov 2014 12:16:41 +0000 (14:16 +0200)]
hdsenc: Use the right filename in an error message
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Tue, 18 Nov 2014 11:52:26 +0000 (13:52 +0200)]
configure: Fix enabling memalign_hack automatically
simd_align_16 is a configure item that can be enabled or disabled,
it's not a variable containing a list of other configure items
as need_memalign previously. This was broken in
eba2233b5.
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Vittorio Giovara [Sun, 16 Nov 2014 23:22:23 +0000 (00:22 +0100)]
mov: check ff_get_wav_header() return value
CC: libav-stable@libav.org
Bug-Id: CID 717497
Vittorio Giovara [Sun, 16 Nov 2014 23:22:27 +0000 (00:22 +0100)]
lavc: fix bitshifts amount bigger than the type
CC: libav-stable@libav.org
Bug-Id: CID
1194387 / CID
1194389 / CID
1194393 / CID
1206638
Vittorio Giovara [Sun, 16 Nov 2014 23:22:28 +0000 (00:22 +0100)]
libvpxenc: clean memory on error
CC: libav-stable@libav.org
Bug-Id: CID 733795
Vittorio Giovara [Sun, 16 Nov 2014 23:22:22 +0000 (00:22 +0100)]
librtmp: append the correct field to the string
Also prevent a NULL pointer dereference.
CC: libav-stable@libav.org
Bug-Id: CID
1250329 / CID
1250331
Martin Storsjö [Mon, 17 Nov 2014 11:31:47 +0000 (13:31 +0200)]
lavf: Only initialize s->offset once when using avoid_negative_ts make_zero
When given a stream starting at dts=0, it would previously consider
s->offset as uninitialized and set an offset when the second packet
was written, ending up writing two packets with dts=0. By initializing
this field to AV_NOPTS_VALUE, we make sure that we only initialize it
once, on the first packet.
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Wed, 29 Oct 2014 09:43:34 +0000 (11:43 +0200)]
tools: Add a sidxindex tool
This tool can write an MPD file for fragmented MP4 files with
a sidx index at the start of the file.
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Tue, 21 Oct 2014 08:42:27 +0000 (11:42 +0300)]
movenc: Allow writing a DASH sidx atom at the start of files
This is mapped to the faststart flag (which in this case
perhaps should be called "shift and write index at the
start of the file"), which for fragmented files will
write a sidx index at the start.
When segmenting DASH into files, there's usually one sidx
at the start of each segment (although it's not clear to me
whether that actually is necessary). When storing all of it
in one file, the MPD doesn't necessarily need to describe
the individual segments, but the offsets of the fragments can be
fetched from one large sidx atom at the start of the file. This
allows creating files for the DASH ISO BMFF on-demand profile.
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Sun, 12 Oct 2014 20:49:22 +0000 (23:49 +0300)]
movenc: Add tfra entries for all tracks in a moof
Previously only tfra entries were added for the first track in each moof.
The frag_info array used for tfra can also be used for writing
other kinds of fragment indexes, where it's more important to
include all tracks.
When the separate_moof option is enabled (as in ismv), we write
a separate moof for each track, so this doesn't make any difference
in that case.
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Mon, 6 Oct 2014 08:36:17 +0000 (11:36 +0300)]
lavf: Add an MPEG-DASH ISOFF segmenting muxer
This is mostly to serve as a reference example on how to segment
the output from the mp4 muxer, capable of writing the segment
list in four different ways:
- SegmentTemplate with SegmentTimeline
- SegmentTemplate with implicit segments
- SegmentList with individual files
- SegmentList with one single file per track, and byte ranges
The muxer is able to serve live content (with optional windowing)
or create a static segmented MPD.
In advanced cases, users will probably want to do the segmenting
in their own application code.
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Sun, 5 Oct 2014 20:51:47 +0000 (23:51 +0300)]
movenc: Add support for writing sidx atoms for DASH segments
A flag "dash" is added, which enables the necessary flags for
creating DASH compatible fragments.
When this is enabled, one sidx atom is written for each track
before every moof atom.
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Sun, 12 Oct 2014 20:37:17 +0000 (23:37 +0300)]
movenc: Factorize adding fragment info into a separate function
By calling this after writing the moof the first time (for
calculating the moof size), we can avoid intermediate storage
of tfrf_offset in MOVTrack.
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Mon, 3 Nov 2014 21:44:02 +0000 (23:44 +0200)]
movenc: Include empty tracks in iods when writing fragmented mp4
When writing fragmented streams with an empty initial moov,
we won't have any samples in any tracks when writing the
moov atom, thus trust that any tracks that are added actually
will be present.
Signed-off-by: Martin Storsjö <martin@martin.st>
Andrew Stone [Fri, 7 Nov 2014 21:09:10 +0000 (16:09 -0500)]
flvenc: Send new metadata when FLAG_METADATA_UPDATED is set.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Andrew Stone [Fri, 7 Nov 2014 21:09:09 +0000 (16:09 -0500)]
flvenc: move metadata updates into a single function
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Anton Khirnov [Sun, 16 Nov 2014 07:23:19 +0000 (08:23 +0100)]
hevc: remove superfluous assignments and checks
Anton Khirnov [Sun, 16 Nov 2014 07:15:42 +0000 (08:15 +0100)]
hevc: eliminate an unneeded intermediate variable
Anton Khirnov [Sun, 16 Nov 2014 07:13:46 +0000 (08:13 +0100)]
hevc: reduce variable scope
Also, collapse the array into a scalar, since only one value is needed
at a time.
Anton Khirnov [Sun, 16 Nov 2014 07:06:27 +0000 (08:06 +0100)]
hevc: further reduce code duplication in hls_prediction_unit()
Anton Khirnov [Sun, 16 Nov 2014 07:02:18 +0000 (08:02 +0100)]
hevc: reduce code duplication in hls_prediction_unit()
Anton Khirnov [Sat, 15 Nov 2014 21:31:27 +0000 (22:31 +0100)]
hevcdsp_template: templatize transquant_bypass
Anton Khirnov [Sat, 15 Nov 2014 20:18:51 +0000 (21:18 +0100)]
hevc: remove an unused function parameter
Anton Khirnov [Sat, 15 Nov 2014 19:40:12 +0000 (20:40 +0100)]
hevc: remove a redundant line
pred_mode is overwritten a few lines immediately below.
Anton Khirnov [Sat, 15 Nov 2014 19:00:22 +0000 (20:00 +0100)]
hevc: do not store rqt_root_cbf in the context
It does not need to be accessed outside of hls_coding_unit().
Anton Khirnov [Sat, 15 Nov 2014 19:00:22 +0000 (20:00 +0100)]
hevc: do not store pcm_flag in the context
It does not need to be accessed outside of hls_coding_unit().
Martin Storsjö [Tue, 11 Nov 2014 22:00:04 +0000 (00:00 +0200)]
aarch64: Make the function pointer tables position independent
This allows running the code on android, where 64 bit binaries with
text relocations aren't allowed to be loaded.
Signed-off-by: Martin Storsjö <martin@martin.st>
Michael Niedermayer [Wed, 12 Nov 2014 10:13:01 +0000 (11:13 +0100)]
on2avc: Fix out of array access
CC: libav-stable@libav.org
Bug-Id: CID
1206648
Luca Barbato [Wed, 12 Nov 2014 18:10:39 +0000 (19:10 +0100)]
dv: Drop a spurious check
The buffer is always valid.
Bug-Id: CID 700682
Marvin Scholz [Tue, 11 Nov 2014 01:39:40 +0000 (02:39 +0100)]
Icecast: Send content-type in all cases
This is needed because Icecast since version 2.4.1 doesn't default
to audio/mpeg anymore. AVOption default not used here, since a later
check if -content_type is set is performed and would break.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Marvin Scholz [Tue, 11 Nov 2014 01:39:39 +0000 (02:39 +0100)]
Icecast: Send 100-continue header if possible
This allows for proper error reporting. Only do
this for non-legacy requests as only Icecast >2.4.0
will reply with a proper status.
Libav seems to accept both, 100 and 200 status codes, but
let's stay close to spec.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Kieran Kunhya [Tue, 11 Nov 2014 18:43:42 +0000 (18:43 +0000)]
vf_interlace: Add SIMD for lowpass filter
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Vittorio Giovara [Wed, 12 Nov 2014 18:10:46 +0000 (19:10 +0100)]
atrac3plus: always initialize refwaves
CC: libav-stable@libav.org
Bug-Id: CID
1163851
Vittorio Giovara [Wed, 12 Nov 2014 18:10:47 +0000 (19:10 +0100)]
lpc: always initialize ref and err
CC: libav-stable@libav.org
Bug-Id: CID 29585 / CID 700759
Vittorio Giovara [Wed, 12 Nov 2014 18:10:45 +0000 (19:10 +0100)]
exr: check return value
CC: libav-stable@libav.org
Bug-Id: CID
1198259
Thilo Borgmann [Wed, 12 Nov 2014 18:10:43 +0000 (19:10 +0100)]
bgmc: fix sizeof arguments
CC: libav-devel@libav.org
Bug-Id: CID 608084 / CID 700724
Vittorio Giovara [Fri, 14 Nov 2014 13:39:18 +0000 (14:39 +0100)]
riff: support ProRes in avi (APCN fourcc)
Vittorio Giovara [Wed, 12 Nov 2014 10:13:11 +0000 (11:13 +0100)]
jpeg2000: do not compute the same value twice
CC: libav-stable@libav.org
Bug-Id: CID
1026771 / CID
1026772 / CID
1026773
Vittorio Giovara [Wed, 12 Nov 2014 10:13:07 +0000 (11:13 +0100)]
svq1enc: check ff_get_buffer return value
CC: libav-stable@libav.org
Bug-Id: CID 747723
Vittorio Giovara [Wed, 12 Nov 2014 10:13:06 +0000 (11:13 +0100)]
ansi: check ff_set_dimensions return value
CC: libav-stable@libav.org
Bug-Id: CID
1135737
Vittorio Giovara [Wed, 12 Nov 2014 10:13:05 +0000 (11:13 +0100)]
avs: check ff_set_dimensions return value
CC: libav-stable@libav.org
Bug-Id: CID
1135738
Vittorio Giovara [Wed, 12 Nov 2014 10:13:04 +0000 (11:13 +0100)]
g2meet: check ff_set_dimensions return value
CC: libav-stable@libav.org
Bug-Id: CID
1135739
Vittorio Giovara [Wed, 12 Nov 2014 10:13:02 +0000 (11:13 +0100)]
indeo3: check ff_set_dimensions return value
CC: libav-stable@libav.org
Bug-Id: CID
1135740
Vittorio Giovara [Tue, 11 Nov 2014 16:40:08 +0000 (17:40 +0100)]
shorten: check for return value
Avoid a possible negative bitshift.
CC: libav-stable@libav.org
Bug-Id: CID
1194400
Vittorio Giovara [Wed, 12 Nov 2014 10:13:03 +0000 (11:13 +0100)]
dcadec: initialize variables before use
CC: libav-stable@libav.org
Bug-Id: CID 700751 / CID 700752
Vittorio Giovara [Tue, 11 Nov 2014 16:40:09 +0000 (17:40 +0100)]
escape124: explicitly set get_bits1 variable
Makes coverity less confused.
CC: libav-stable@libav.org
Bug-Id: CID
1203487
Vittorio Giovara [Tue, 11 Nov 2014 16:40:06 +0000 (17:40 +0100)]
mlpdec: check for negative index
CC: libav-stable@libav.org
Bug-Id: CID 970924
Vittorio Giovara [Tue, 11 Nov 2014 16:40:04 +0000 (17:40 +0100)]
ffv1: fix out-of-bounds read
CC: libav-stable@libav.org
Bug-Id: CID
1047234
Vittorio Giovara [Tue, 11 Nov 2014 16:40:03 +0000 (17:40 +0100)]
vorbisenc: add missing parenthesis
Bug-Id: CID
1238791
Vittorio Giovara [Tue, 11 Nov 2014 16:40:02 +0000 (17:40 +0100)]
dpxenc: mention missing break
Bug-Id: CID 732229
Vittorio Giovara [Tue, 11 Nov 2014 16:40:01 +0000 (17:40 +0100)]
sunrastenc: mention missing break
Bug-Id: CID 732231
Vittorio Giovara [Tue, 11 Nov 2014 16:40:00 +0000 (17:40 +0100)]
vc1dec: refactor check with missing parenthesis
FATE tests updated accordingly, no visual difference.
CC: libav-stable@libav.org
Bug-Id: CID
1087087
Vittorio Giovara [Tue, 11 Nov 2014 16:39:59 +0000 (17:39 +0100)]
vc1dec: always initialize tx and ty
CC: libav-stable@libav.org
Bug-Id: CID
1245702 / CID
1245703
Vittorio Giovara [Tue, 11 Nov 2014 12:27:03 +0000 (13:27 +0100)]
dnxhdenc: check negative index
CC: libav-stable@libav.org
Bug-Id: CID 700464
Vittorio Giovara [Tue, 11 Nov 2014 12:27:02 +0000 (13:27 +0100)]
display: fix order of operands
CC: libav-stable@libav.org
Bug-Id: CID
1238828 / CID
1238832