OSDN Git Service
Linus Torvalds [Fri, 24 Apr 2009 15:32:23 +0000 (08:32 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/geert/linux-m68k
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: Update defconfigs for 2.6.30-rc3
m68k,m68knommu: Wire up preadv and pwritev
scsi: a4000 - Correct driver unregistration in case of failure
Linus Torvalds [Fri, 24 Apr 2009 15:28:27 +0000 (08:28 -0700)]
Merge branch 'for-linus' of git://git390.marist.edu/linux-2.6
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
[S390] update default configuration.
[S390] omit frame pointers on s390 when possible
[S390] Use tape_generic_offline directly.
[S390] /proc/stat idle field for idle cpus
[S390] appldata: avoid deadlock with appldata_mem
[S390] ipl: fix compile breakage
Linus Torvalds [Fri, 24 Apr 2009 15:27:02 +0000 (08:27 -0700)]
Merge git://git./linux/kernel/git/steve/gfs2-2.6-fixes
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes:
GFS2: Ensure that the inode goal block settings are updated
GFS2: Fix bug in block allocation
bitops: Add __ffs64 bitop
Linus Torvalds [Fri, 24 Apr 2009 15:26:01 +0000 (08:26 -0700)]
Merge branch 'kvm-updates/2.6.30' of git://git./virt/kvm/kvm
* 'kvm-updates/2.6.30' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: Unregister cpufreq notifier on unload
KVM: x86: release time_page on vcpu destruction
KVM: Fix overlapping check for memory slots
KVM: MMU: disable global page optimization
KVM: ia64: fix locking order entering guest
KVM: MMU: Fix off-by-one calculating large page count
Linus Torvalds [Fri, 24 Apr 2009 15:16:05 +0000 (08:16 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/bart/ide-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
MAINTAINERS: update IDE entry
palm_bk3710: palm_bk3710_udmatimings[] CodingStyle fixup
palm_bk3710: those registers/bitfields don't exist
mediabay: fix build for CONFIG_BLOCK=n
ide: Stop disks on reboot for laptop which cuts power
ide-cd: fix kernel crash on hppa regression
palm_bk3710: UDMA performance fix
Linus Torvalds [Fri, 24 Apr 2009 15:15:25 +0000 (08:15 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
ALSA: hda - Add quirk for Packard Bell RS65
[ALSA] intel8x0: another attempt to fix ac97_clock measure routine
[ALSA] ac97_codec: increase timeout for analog subsections
ALSA: hda - Add quirks for Realtek codecs
ALSA: hda - Fix alc662_init_verbs
ALSA: keywest: Convert to new-style i2c driver
ALSA: AOA: Convert onyx and tas codecs to new-style i2c drivers
ALSA: Atiixp: Add SSID for mute_led quirk (unknown HP model)
ALSA: us122l: add snd_us122l_free()
ASoC: Fix warning in wm9705
ASoC: OMAP: Update contact addresses
ASoC: pxa-ssp: Don't use SSCR0_SerClkDiv and SSCR0_SCR
ALSA: us122l: Fix signedness in comparisions
Alan Cox [Wed, 22 Apr 2009 14:03:15 +0000 (15:03 +0100)]
radio_si470x: Fix free memory corruption
The release path for a disconnected device frees the object then unlocks
the mutex in the freed object...
Found by Dan Carpenter using Smatch
Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Niels de Vos [Wed, 22 Apr 2009 14:02:44 +0000 (15:02 +0100)]
serial: remove contact data
Remove my name and emailaddress from note in the source. Wincor Nixdorf
only has some ITE-chips on their mainboards, other chips are not
available for me for testing.
Signed-off-by: Niels de Vos <niels.devos@wincor-nixdorf.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Wed, 22 Apr 2009 14:02:23 +0000 (15:02 +0100)]
cafe_nand: Fix warning
Wrong types on IRQ handler
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 24 Apr 2009 14:48:24 +0000 (07:48 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
cfq-iosched: cache prio_tree root in cfqq->p_root
cfq-iosched: fix bug with aliased request and cooperation detection
cfq-iosched: clear ->prio_trees[] on cfqd alloc
block: fix intermittent dm timeout based oops
umem: fix request_queue lock warning
block: simplify I/O stat accounting
pktcdvd.h should include mempool.h
cfq-iosched: use the default seek distance when there aren't enough seek samples
cfq-iosched: make seek_mean converge more quickly
block: make blk_abort_queue() ignore non-request based devices
block: include empty disks in /proc/diskstats
bio: use bio_kmalloc() in copy/map functions
bio: fix bio_kmalloc()
block: fix queue bounce limit setting
block: fix SG_IO vector request data length handling
scatterlist: make sure sg_miter_next() doesn't return 0 sized mappings
David Howells [Wed, 22 Apr 2009 11:10:07 +0000 (12:10 +0100)]
MN10300: Update the ASB2303 defconfig
Update the defconfig for the ASB2303 evaluation board.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jonathan Corbet [Wed, 22 Apr 2009 11:01:49 +0000 (12:01 +0100)]
Delete slow-work timers properly
Slow-work appears to delete its timer as soon as the first user
unregisters, even though other users could be active. At the same time, it
never seems to delete slow_work_oom_timer. Arrange for both to happen in
the shutdown path.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 24 Apr 2009 14:46:51 +0000 (07:46 -0700)]
Merge git://git./linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (94 commits)
netfilter: ctnetlink: fix gcc warning during compilation
net/netrom: Fix socket locking
netlabel: Always remove the correct address selector
ucc_geth.c: Fix upsmr setting in RMII mode
8139too: fix HW initial flow
af_iucv: Fix race when queuing incoming iucv messages
af_iucv: Test additional sk states in iucv_sock_shutdown
af_iucv: Reject incoming msgs if RECV_SHUTDOWN is set
af_iucv: fix oops in iucv_sock_recvmsg() for MSG_PEEK flag
af_iucv: consider state IUCV_CLOSING when closing a socket
iwlwifi: DMA fixes
iwlwifi: add debugging for TX path
mwl8: fix build warning.
mac80211: fix alignment calculation bug
mac80211: do not print WARN if config interface
iwl3945: use cancel_delayed_work_sync to cancel rfkill_poll
iwlwifi: fix EEPROM validation mask to include OTP only devices
atmel: fix netdev ops conversion
pcnet_cs: add cis(firmware) of the Allied Telesis LA-PCM
mlx4_en: Fix cleanup if workqueue create in mlx4_en_add() fails
...
Linus Torvalds [Fri, 24 Apr 2009 14:45:52 +0000 (07:45 -0700)]
Merge git://git./linux/kernel/git/davem/sparc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
sparc: Fix bus type probing for ESP and LE devices.
sparc32: Update defconfig.
sparc64: Update defconfig.
Linus Torvalds [Fri, 24 Apr 2009 14:44:58 +0000 (07:44 -0700)]
Merge branch 'merge' of git://git./linux/kernel/git/paulus/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
powerpc: Fix modular build of ide-pmac when mediabay is built in
powerpc/pasemi: Fix build error on UP
powerpc: Make macintosh/mediabay driver depend on CONFIG_BLOCK
maintainers: Fix PS3 patterns
powerpc/ps3: Fix CONFIG_PS3_FLASH=n build warning
powerpc/32: Don't clobber personality flags on exec
powerpc: Fix crash on CPU hotplug
powerpc/85xx: Remove defconfigs that mpc85xx_{smp_}defconfig cover
powerpc/85xx: Added SMP defconfig
powerpc/85xx: Enabled a bunch of FSL specific drivers/options
powerpc/85xx: Updated generic mpc85xx_defconfig
powerpc: don't disable SATA interrupts on Freescale MPC8610 HPCD
fsl_rio: Pass the proper device to dma mapping routines
powerpc: Fix of_node_put() exit path in of_irq_map_one()
powerpc/5200: defconfig updates
powerpc/5200: Add FLASH nodes to lite5200 device tree
powerpc/device-tree: Document MTD nodes with multiple "reg" tuples
powerpc/of-device-tree: Factor MTD physmap bindings out of booting-without-of
powerpc/5200: Bring the legacy fsl_spi_platform_data hooks back
Oleg Nesterov [Thu, 23 Apr 2009 23:02:45 +0000 (01:02 +0200)]
check_unsafe_exec: s/lock_task_sighand/rcu_read_lock/
write_lock(¤t->fs->lock) guarantees we can't wrongly miss
LSM_UNSAFE_SHARE, this is what we care about. Use rcu_read_lock()
instead of ->siglock to iterate over the sub-threads. We must see
all CLONE_THREAD|CLONE_FS threads which didn't pass exit_fs(), it
takes fs->lock too.
With or without this patch we can miss the freshly cloned thread
and set LSM_UNSAFE_SHARE, we don't care.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
[ Fixed lock/unlock typo - Hugh ]
Acked-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Thu, 23 Apr 2009 23:01:56 +0000 (01:01 +0200)]
do_execve() must not clear fs->in_exec if it was set by another thread
If do_execve() fails after check_unsafe_exec(), it clears fs->in_exec
unconditionally. This is wrong if we race with our sub-thread which
also does do_execve:
Two threads T1 and T2 and another process P, all share the same
->fs.
T1 starts do_execve(BAD_FILE). It calls check_unsafe_exec(), since
->fs is shared, we set LSM_UNSAFE but not ->in_exec.
P exits and decrements fs->users.
T2 starts do_execve(), calls check_unsafe_exec(), now ->fs is not
shared, we set fs->in_exec.
T1 continues, open_exec(BAD_FILE) fails, we clear ->in_exec and
return to the user-space.
T1 does clone(CLONE_FS /* without CLONE_THREAD */).
T2 continues without LSM_UNSAFE_SHARE while ->fs is shared with
another process.
Change check_unsafe_exec() to return res = 1 if we set ->in_exec, and change
do_execve() to clear ->in_exec depending on res.
When do_execve() suceeds, it is safe to clear ->in_exec unconditionally.
It can be set only if we don't share ->fs with another process, and since
we already killed all sub-threads either ->in_exec == 0 or we are the
only user of this ->fs.
Also, we do not need fs->lock to clear fs->in_exec.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Acked-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jens Axboe [Thu, 23 Apr 2009 10:19:38 +0000 (12:19 +0200)]
cfq-iosched: cache prio_tree root in cfqq->p_root
Currently we look it up from ->ioprio, but ->ioprio can change if
either the process gets its IO priority changed explicitly, or if
cfq decides to temporarily boost it. So if we are unlucky, we can
end up attempting to remove a node from a different rbtree root than
where it was added.
Fix this by using ->org_ioprio as the prio_tree index, since that
will only change for explicit IO priority settings (not for a boost).
Additionally cache the rbtree root inside the cfqq, then we don't have
to add code to reinsert the cfqq in the prio_tree if IO priority changes.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Jens Axboe [Thu, 23 Apr 2009 10:14:56 +0000 (12:14 +0200)]
cfq-iosched: fix bug with aliased request and cooperation detection
cfq_prio_tree_lookup() should return the direct match, yet it always
returns zero. Fix that.
cfq_prio_tree_add() assumes that we don't get a direct match, while
it is very possible that we do. Using O_DIRECT, you can have different
cfqq with matching requests, since you don't have the page cache
to serialize things for you. Fix this bug by only adding the cfqq if
there isn't an existing match.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Jens Axboe [Thu, 23 Apr 2009 10:13:27 +0000 (12:13 +0200)]
cfq-iosched: clear ->prio_trees[] on cfqd alloc
Not strictly needed, but we should make it clear that we init the
rbtree roots here.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Hannes Reinecke [Thu, 23 Apr 2009 08:32:59 +0000 (10:32 +0200)]
block: fix intermittent dm timeout based oops
Very rarely under stress testing of dm, oopses are occuring as
something tampers with an old stack frame. This has been traced back
to blk_abort_queue() leaving a timeout_list pointing to the stack.
The reason is that sometimes blk_abort_request() won't delete the
timer (if the request is marked as complete but before the timer has
been removed, a small race window). Fix this by splicing back from
the ususally empty list to the q->timeout_list.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Sage Weil [Thu, 23 Apr 2009 06:37:58 +0000 (08:37 +0200)]
umem: fix request_queue lock warning
The umem driver issues two warnings on boot, due to blk_plug_device() and
blk_remove_plug() being called without q->queue_lock held. Starting with
e48ec690 (block: extend queue_flag bitops), the queue_flag_* functions
warn if q->queue_lock doesn't appear to be locked. In fact, q->queue_lock
is NULL (though that apparently isn't otherwise a problem as the driver is
using card->lock for everything).
Although blk_init_queue() with take a request_fn_proc and spinlock_t*,
there isn't a corresponding init helper that takes a make_request_fn.
Setting queue_lock to &card->lock explicitly seems to work fine for me.
The warning goes away and the device appears to behave.
[ 1.531881] v2.3 : Micro Memory(tm) PCI memory board block driver
[ 1.538136] umem 0000:02:01.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.545018] umem 0000:02:01.0: Micro Memory(tm) controller found (PCI Mem Module (Battery Backup))
[ 1.554176] umem 0000:02:01.0: CSR 0xfc9ffc00 -> 0xffffc200013d0c00 (0x100)
[ 1.561279] umem 0000:02:01.0: Size
1048576 KB, Battery 1 Disabled (FAILURE), Battery 2 Disabled (FAILURE)
[ 1.571114] umem 0000:02:01.0: Window size
16777216 bytes, IRQ 20
[ 1.577304] umem 0000:02:01.0: memory NOT initialized. Consider over-writing whole device.
[ 1.585989] umema:<4>------------[ cut here ]------------
[ 1.591775] WARNING: at include/linux/blkdev.h:492 blk_plug_device+0x6d/0x106()
[ 1.592025] Hardware name: H8SSL
[ 1.592025] Modules linked in:
[ 1.592025] Pid: 1, comm: swapper Not tainted 2.6.29 #8
[ 1.592025] Call Trace:
[ 1.592025] [<
ffffffff8023c994>] warn_slowpath+0xd3/0xf2
[ 1.592025] [<
ffffffff8025a5b5>] ? save_trace+0x3f/0x9b
[ 1.592025] [<
ffffffff8025a68b>] ? add_lock_to_list+0x7a/0xba
[ 1.592025] [<
ffffffff8025e609>] ? validate_chain+0xb3b/0xce8
[ 1.592025] [<
ffffffff80441556>] ? mm_make_request+0x27/0x59
[ 1.592025] [<
ffffffff80441556>] ? mm_make_request+0x27/0x59
[ 1.592025] [<
ffffffff8025ef04>] ? __lock_acquire+0x74e/0x7b9
[ 1.592025] [<
ffffffff8025a70e>] ? get_lock_stats+0x34/0x5e
[ 1.592025] [<
ffffffff8025a746>] ? put_lock_stats+0xe/0x27
[ 1.592025] [<
ffffffff80441556>] ? mm_make_request+0x27/0x59
[ 1.592025] [<
ffffffff803ad165>] blk_plug_device+0x6d/0x106
[ 1.592025] [<
ffffffff80441575>] mm_make_request+0x46/0x59
[ 1.592025] [<
ffffffff803ac2d9>] generic_make_request+0x335/0x3cf
[ 1.592025] [<
ffffffff8027fcc7>] ? mempool_alloc_slab+0x11/0x13
[ 1.592025] [<
ffffffff8027fdce>] ? mempool_alloc+0x45/0x101
[ 1.592025] [<
ffffffff8025a746>] ? put_lock_stats+0xe/0x27
[ 1.592025] [<
ffffffff803adda5>] submit_bio+0x10a/0x119
[ 1.592025] [<
ffffffff802c8d00>] submit_bh+0xe5/0x109
[ 1.592025] [<
ffffffff802cbf43>] block_read_full_page+0x2aa/0x2cb
[ 1.592025] [<
ffffffff802cf4c4>] ? blkdev_get_block+0x0/0x4c
[ 1.592025] [<
ffffffff805c90a8>] ? _spin_unlock_irq+0x36/0x51
[ 1.592025] [<
ffffffff80286836>] ? __lru_cache_add+0x92/0xb2
[ 1.592025] [<
ffffffff802cf008>] blkdev_readpage+0x13/0x15
[ 1.592025] [<
ffffffff8027de06>] read_cache_page_async+0x90/0x134
[ 1.592025] [<
ffffffff802ceff5>] ? blkdev_readpage+0x0/0x15
[ 1.592025] [<
ffffffff802f5f1c>] ? adfspart_check_ICS+0x0/0x16c
[ 1.592025] [<
ffffffff8027deb8>] read_cache_page+0xe/0x45
[ 1.592025] [<
ffffffff802f5170>] read_dev_sector+0x2e/0x93
[ 1.592025] [<
ffffffff802f5f44>] adfspart_check_ICS+0x28/0x16c
[ 1.592025] [<
ffffffff8025d427>] ? trace_hardirqs_on+0xd/0xf
[ 1.592025] [<
ffffffff802f5f1c>] ? adfspart_check_ICS+0x0/0x16c
[ 1.592025] [<
ffffffff802f59c5>] rescan_partitions+0x168/0x2fb
[ 1.592025] [<
ffffffff802ceae9>] __blkdev_get+0x259/0x336
[ 1.592025] [<
ffffffff803ca1e2>] ? kobject_put+0x47/0x4b
[ 1.592025] [<
ffffffff802cebd1>] blkdev_get+0xb/0xd
[ 1.592025] [<
ffffffff802f5773>] register_disk+0xc4/0x12b
[ 1.592025] [<
ffffffff803b2a7b>] add_disk+0xc3/0x12d
[ 1.592025] [<
ffffffff808a1d4a>] ? mm_init+0x0/0x1a5
[ 1.592025] [<
ffffffff808a1e73>] mm_init+0x129/0x1a5
[ 1.592025] [<
ffffffff808a1d4a>] ? mm_init+0x0/0x1a5
[ 1.592025] [<
ffffffff80209056>] _stext+0x56/0x130
[ 1.592025] [<
ffffffff80274932>] ? register_irq_proc+0xae/0xca
[ 1.592025] [<
ffffffff802f0000>] ? proc_pid_lookup+0xb4/0x18b
[ 1.592025] [<
ffffffff8087f975>] kernel_init+0x132/0x18b
[ 1.592025] [<
ffffffff8020d17a>] child_rip+0xa/0x20
[ 1.592025] [<
ffffffff8020cb40>] ? restore_args+0x0/0x30
[ 1.592025] [<
ffffffff8087f843>] ? kernel_init+0x0/0x18b
[ 1.592025] [<
ffffffff8020d170>] ? child_rip+0x0/0x20
[ 1.592025] ---[ end trace
7150b3b86da74e1e ]---
[ 1.889858] ------------[ cut here ]------------[ve_plug+0x5f/0x91()
[ 1.893848] Hardware name: H8SSL
[ 1.893848] Modules linked in:
[ 1.893848] Pid: 1, comm: swapper Tainted: G W 2.6.29 #8
[ 1.893848] Call Trace:
[ 1.893848] [<
ffffffff8023c994>] warn_slowpath+0xd3/0xf2
[ 1.893848] [<
ffffffff805c8411>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[ 1.893848] [<
ffffffff8020cb40>] ? restore_args+0x0/0x30
[ 1.893848] [<
ffffffff80254245>] ? __atomic_notifier_call_chain+0x0/0xb2
[ 1.893848] [<
ffffffff805c90a3>] ? _spin_unlock_irq+0x31/0x51
[ 1.893848] [<
ffffffff805c90bf>] ? _spin_unlock_irq+0x4d/0x51
[ 1.893848] [<
ffffffff8044157d>] ? mm_make_request+0x4e/0x59
[ 1.893848] [<
ffffffff8025a70e>] ? get_lock_stats+0x34/0x5e
[ 1.893848] [<
ffffffff8025a75d>] ? put_lock_stats+0x25/0x27
[ 1.893848] [<
ffffffff80441504>] ? mm_unplug_device+0x25/0x50
[ 1.893848] [<
ffffffff803acf23>] blk_remove_plug+0x5f/0x91
[ 1.893848] [<
ffffffff8044150f>] mm_unplug_device+0x30/0x50
[ 1.893848] [<
ffffffff803ab74a>] blk_unplug+0x78/0x7d
[ 1.893848] [<
ffffffff803ab75c>] blk_backing_dev_unplug+0xd/0xf
[ 1.893848] [<
ffffffff802c853c>] block_sync_page+0x4a/0x4c
[ 1.893848] [<
ffffffff8027da1c>] sync_page+0x44/0x4d
[ 1.893848] [<
ffffffff805c66fd>] __wait_on_bit_lock+0x42/0x8a
[ 1.893848] [<
ffffffff8027d9d8>] ? sync_page+0x0/0x4d
[ 1.893848] [<
ffffffff8027d9c4>] __lock_page+0x64/0x6b
[ 1.893848] [<
ffffffff802508db>] ? wake_bit_function+0x0/0x2a
[ 1.893848] [<
ffffffff8027de4a>] read_cache_page_async+0xd4/0x134
[ 1.893848] [<
ffffffff802ceff5>] ? blkdev_readpage+0x0/0x15
[ 1.893848] [<
ffffffff802f5f1c>] ? adfspart_check_ICS+0x0/0x16c
[ 1.893848] [<
ffffffff8027deb8>] read_cache_page+0xe/0x45
[ 1.893848] [<
ffffffff802f5170>] read_dev_sector+0x2e/0x93
[ 1.893848] [<
ffffffff802f5f44>] adfspart_check_ICS+0x28/0x16c
[ 1.893848] [<
ffffffff8025d427>] ? trace_hardirqs_on+0xd/0xf
[ 1.893848] [<
ffffffff802f5f1c>] ? adfspart_check_ICS+0x0/0x16c
[ 1.893848] [<
ffffffff802f59c5>] rescan_partitions+0x168/0x2fb
[ 1.893848] [<
ffffffff802ceae9>] __blkdev_get+0x259/0x336
[ 1.893848] [<
ffffffff803ca1e2>] ? kobject_put+0x47/0x4b
[ 1.893848] [<
ffffffff802cebd1>] blkdev_get+0xb/0xd
[ 1.893848] [<
ffffffff802f5773>] register_disk+0xc4/0x12b
[ 1.893848] [<
ffffffff803b2a7b>] add_disk+0xc3/0x12d
[ 1.893848] [<
ffffffff808a1d4a>] ? mm_init+0x0/0x1a5
[ 1.893848] [<
ffffffff808a1e73>] mm_init+0x129/0x1a5
[ 1.893848] [<
ffffffff808a1d4a>] ? mm_init+0x0/0x1a5
[ 1.893848] [<
ffffffff80209056>] _stext+0x56/0x130
[ 1.893848] [<
ffffffff80274932>] ? register_irq_proc+0xae/0xca
[ 1.893848] [<
ffffffff802f0000>] ? proc_pid_lookup+0xb4/0x18b
[ 1.893848] [<
ffffffff8087f975>] kernel_init+0x132/0x18b
[ 1.893848] [<
ffffffff8020d17a>] child_rip+0xa/0x20
[ 1.893848] [<
ffffffff8020cb40>] ? restore_args+0x0/0x30
[ 1.893848] [<
ffffffff8087f843>] ? kernel_init+0x0/0x18b
[ 1.893848] [<
ffffffff8020d170>] ? child_rip+0x0/0x20
[ 1.893848] ---[ end trace
7150b3b86da74e1f ]---
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Jerome Marchand [Wed, 22 Apr 2009 12:01:49 +0000 (14:01 +0200)]
block: simplify I/O stat accounting
This simplifies I/O stat accounting switching code and separates it
completely from I/O scheduler switch code.
Requests are accounted according to the state of their request queue
at the time of the request allocation. There is no need anymore to
flush the request queue when switching I/O accounting state.
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Alexander Beregalov [Tue, 21 Apr 2009 07:33:14 +0000 (09:33 +0200)]
pktcdvd.h should include mempool.h
Fix this build error:
In file included from fs/compat_ioctl.c:104:
include/linux/pktcdvd.h:285: error: expected specifier-qualifier-list before 'mempool_t'
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Bartlomiej Zolnierkiewicz [Thu, 23 Apr 2009 20:53:45 +0000 (22:53 +0200)]
MAINTAINERS: update IDE entry
By a popular demand quilt tree was replaced by a git one.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Bartlomiej Zolnierkiewicz [Thu, 23 Apr 2009 20:53:45 +0000 (22:53 +0200)]
palm_bk3710: palm_bk3710_udmatimings[] CodingStyle fixup
Remove superfluous commas and add missing whitespaces.
Noticed-by: Joe Perches <joe@perches.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
David Brownell [Thu, 23 Apr 2009 20:53:43 +0000 (22:53 +0200)]
palm_bk3710: those registers/bitfields don't exist
Bugfixes noted by checking the code against the controller
documentation (TI document number SPRUE21):
- Remove declarations for eight non-existent registers (!);
and remove accesses to two of them.
- Remove access to various non-existent bitfields in some of
the registers which *do* exist (those fields must-be-zero).
- Provide comment to replace bogus reset logic (removed above,
it relied on non-existent bitfields). Resets require GPIO
help; this driver doesn't currently know about that.
With some minor cleanup: relocate a comment, avoid an extra
lookup of the PIO timings.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Martin Schwidefsky [Thu, 23 Apr 2009 11:58:11 +0000 (13:58 +0200)]
[S390] update default configuration.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Thu, 23 Apr 2009 11:58:10 +0000 (13:58 +0200)]
[S390] omit frame pointers on s390 when possible
Always omit frame pointers on s390. They aren't too useful for the
kernel since we have already the kernel stack backchain which allows
us to walk the kernel stack.
So eleminate the extra code for frame pointers. Only allow the extra
code for the function tracer since the gcc compile options -pg and
-fomit-frame-pointer are incompatible.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Frank Munzert [Thu, 23 Apr 2009 11:58:09 +0000 (13:58 +0200)]
[S390] Use tape_generic_offline directly.
tape_3590_offline and tape_34xx_offline are removed and tape_generic_offline
is called directly instead.
Signed-off-by: Frank Munzert <munzert@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Martin Schwidefsky [Thu, 23 Apr 2009 11:58:08 +0000 (13:58 +0200)]
[S390] /proc/stat idle field for idle cpus
The cpu idle field in the output of /proc/stat is too small for cpus
that have been idle for more than a tick. Add the architecture hook
arch_idle_time that allows to add the not accounted idle time of a
sleeping cpu without waking the cpu.
The s390 implementation of arch_idle_time uses the already existing
s390_idle_data per_cpu variable to find the sleep time of a neighboring
idle cpu.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Gerald Schaefer [Thu, 23 Apr 2009 11:58:07 +0000 (13:58 +0200)]
[S390] appldata: avoid deadlock with appldata_mem
The appldata_ops callbacks are called with a spin_lock held. But the
appldata_mem callback then calls all_vm_events(), which calls
get_online_cpus(), which might sleep. This possible deadlock is fixed
by using a mutex instead of a spin_lock.
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Thu, 23 Apr 2009 11:58:06 +0000 (13:58 +0200)]
[S390] ipl: fix compile breakage
Fix this for !CONFIG_SMP:
arch/s390/kernel/ipl.c: In function 'stop_run':
arch/s390/kernel/ipl.c:1461: error: implicit declaration of function 'signal_processor'
Reported-by: Sachin Sant <sachinp@in.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Steven Whitehouse [Thu, 23 Apr 2009 07:59:41 +0000 (08:59 +0100)]
GFS2: Ensure that the inode goal block settings are updated
GFS2 has a goal block associated with each inode indicating the
search start position for future block allocations (in fact there
are two, but thats for backward compatibility with GFS1 as they
are set to identical locations in GFS2).
In some circumstances, depending on the ordering of updates to
the inode it was possible for the goal block settings to not
be updated on disk. This patch ensures that the goal block will
always get updated, thus reducing the potential for searching
the same (already allocated) blocks again when looking for free
space during block allocation.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Steven Whitehouse [Thu, 23 Apr 2009 07:54:02 +0000 (08:54 +0100)]
GFS2: Fix bug in block allocation
The new bitfit algorithm was counting from the wrong end of
64 bit words in the bitfield. This fixes it by using __ffs64
instead of fls64
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Steven Whitehouse [Thu, 23 Apr 2009 07:48:15 +0000 (08:48 +0100)]
bitops: Add __ffs64 bitop
Finds the first set bit in a 64 bit word. This is required in order
to fix a bug in GFS2, but I think it should be a generic function
in case of future users.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Reviewed-by: Willy Tarreau <w@1wt.eu>
Geert Uytterhoeven [Sun, 29 Mar 2009 12:23:44 +0000 (14:23 +0200)]
m68k: Update defconfigs for 2.6.30-rc3
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Geert Uytterhoeven [Thu, 9 Apr 2009 20:23:51 +0000 (22:23 +0200)]
m68k,m68knommu: Wire up preadv and pwritev
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Geert Uytterhoeven [Thu, 9 Apr 2009 19:22:42 +0000 (21:22 +0200)]
scsi: a4000 - Correct driver unregistration in case of failure
commit
7a192ec334cab9fafe3a8665a65af398b0e24730 ("platform driver: fix
incorrect use of 'platform_bus_type' with 'struct device_driver') turned a
driver_UNregister into platform_driver_REGISTER. Correct this to
platform_driver_UNregister.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Bartlomiej Zolnierkiewicz [Wed, 22 Apr 2009 18:33:41 +0000 (20:33 +0200)]
mediabay: fix build for CONFIG_BLOCK=n
On Tuesday 14 April 2009 20:31:21 Subrata Modak wrote:
> Observed the following build error:
> ---
> CC drivers/macintosh/mediabay.o
> In file included from drivers/macintosh/mediabay.c:21:
> include/linux/ide.h:605: error: field ‘request_sense_rq’ has incomplete
> type
> make[2]: *** [drivers/macintosh/mediabay.o] Error 1
> make[1]: *** [drivers/macintosh] Error 2
> make: *** [drivers] Error 2
> ---
mediabay shouldn't include <linux/ide.h> unconditionally so
remove the superfluous include from mediabay.c (<asm/mediabay.h>
will pull <linux/ide.h> in for CONFIG_BLK_DEV_IDE_PMAC=y).
Reported-by: Subrata Modak <subrata@linux.vnet.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Bruno Prémont [Wed, 22 Apr 2009 18:33:41 +0000 (20:33 +0200)]
ide: Stop disks on reboot for laptop which cuts power
My laptop (Acer Travelmate 660) always cuts the power when rebooting
which causes the disk to emergency-park it's head.
Add a dmi check to stop disk as for shutdown on this laptop.
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Helge Deller [Wed, 22 Apr 2009 18:33:40 +0000 (20:33 +0200)]
ide-cd: fix kernel crash on hppa regression
With 2.6.30-rc2 I face a kernel crash on the 32bit hppa architecture
due to ide-cd when udev creates the device nodes at startup:
Kernel Fault: Code=26 regs=
8ed34c40 (Addr=
00000024)
IASQ:
00000000 00000000 IAOQ:
1034b5ac 1034b5b0
IIR:
4ab30048 ISR:
00000000 IOR:
00000024
CPU: 0 CR30:
8ed34000 CR31:
ffff55ff
ORIG_R28:
00000000
IAOQ[0]: ide_complete_rq+0x2c/0x70
IAOQ[1]: ide_complete_rq+0x30/0x70
RP(r2): cdrom_newpc_intr+0x178/0x46c
Backtrace:
[<
1035c608>] cdrom_newpc_intr+0x178/0x46c
[<
1034c494>] ide_intr+0x1b0/0x214
[<
1016d284>] handle_IRQ_event+0x70/0x150
[<
1016d4b0>] __do_IRQ+0x14c/0x1cc
[<
102f7864>] superio_interrupt+0x88/0xbc
[<
1016d284>] handle_IRQ_event+0x70/0x150
[<
1016d4b0>] __do_IRQ+0x14c/0x1cc
[<
10112efc>] do_cpu_irq_mask+0x9c/0xd0
[<
10116068>] intr_return+0x0/0x4
This crash seems to happen due to an uninitialized variable "rc".
The compiler even warns about that:
CC drivers/ide/ide-cd.o
/mnt/sda4/home/cvs/parisc/git-kernel/linus-linux-2.6/drivers/ide/ide-cd.c: In function `cdrom_newpc_intr':
/mnt/sda4/home/cvs/parisc/git-kernel/linus-linux-2.6/drivers/ide/ide-cd.c:612: warning: `rc' might be used uninitialized in this function
After applying the trivial patch below, which just initializes
the variable to zero, the kernel doesn't crash any longer:
Starting the hotplug events dispatcher: udevd.
Synthesizing the initial hotplug events...
hda: command error: status=0x51 { DriveReady SeekComplete Error }
hda: command error: error=0x54 <3>{ AbortedCommand LastFailedSense=0x05 }
ide: failed opcode was: unknown
done.
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Borislav Petkov <petkovbb@gmail.com>
Cc: Linus <torvalds@linux-foundation.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
David Brownell [Wed, 22 Apr 2009 18:33:40 +0000 (20:33 +0200)]
palm_bk3710: UDMA performance fix
Fix UDMA throughput bug: tCYC averages t2CYCTYP/2, but the code
previously assumed it was the same as t2CYCTYP. (That is, it was
using just one clock edge, not both.) Move the table's type
declaration so it's adjacent to the table, making it more clear
what those numbers mean.
On one system this change increased throughput by almost 4x: UDMA/66
sometimes topped 23 MB/sec (on a drive known to do much better). On
another system it was around a 10% win (UDMA/66 up to 7+ MB/sec).
The difference might be caused by the ratio between memory and IDE
clocks. In the system with large speedup, this was exactly 2 (as a
workaround for a rev 1.1 silicon bug). The other system used a more
standard ratio of 1.63 (and rev 2.1 silicon) ... clock domain synch
might have some issues, they're not unheard-of.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Jan Kiszka [Fri, 17 Apr 2009 17:24:58 +0000 (19:24 +0200)]
KVM: Unregister cpufreq notifier on unload
Properly unregister cpufreq notifier on onload if it was registered
during init.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Joerg Roedel [Wed, 25 Feb 2009 15:08:31 +0000 (16:08 +0100)]
KVM: x86: release time_page on vcpu destruction
Not releasing the time_page causes a leak of that page or the compound
page it is situated in.
Cc: stable@kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Jan Kiszka [Mon, 13 Apr 2009 09:59:32 +0000 (11:59 +0200)]
KVM: Fix overlapping check for memory slots
When checking for overlapping slots on registration of a new one, kvm
currently also considers zero-length (ie. deleted) slots and rejects
requests incorrectly. This finally denies user space from joining slots.
Fix the check by skipping deleted slots and advertise this via a
KVM_CAP_JOIN_MEMORY_REGIONS_WORKS.
Cc: stable@kernel.org
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Marcelo Tosatti [Sun, 5 Apr 2009 17:54:46 +0000 (14:54 -0300)]
KVM: MMU: disable global page optimization
Complexity to fix it not worthwhile the gains, as discussed
in http://article.gmane.org/gmane.comp.emulators.kvm.devel/28649.
Cc: stable@kernel.org
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Jes Sorensen [Thu, 9 Apr 2009 14:38:14 +0000 (16:38 +0200)]
KVM: ia64: fix locking order entering guest
Reorder locking as down_read() may return with local interrupts enabled,
which means we could go into vti_vcpu_run() with interrupts enabled.
This caused random crashes on the Altix as the timer interrupt tried
to read a memory mapped clock source, for which the TLB had not yet been
reinstated in the exit, before ipsr was retored.
Signed-off-by: Jes Sorensen <jes@sgi.com>
Acked-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Avi Kivity [Sun, 29 Mar 2009 13:31:25 +0000 (16:31 +0300)]
KVM: MMU: Fix off-by-one calculating large page count
The large page initialization code concludes there are two large pages spanned
by a slot covering 1 (small) page starting at gfn 1. This is incorrect, and
also results in incorrect write_count initialization in some cases (base = 1,
npages = 513 for example).
Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
David S. Miller [Fri, 17 Apr 2009 11:14:15 +0000 (04:14 -0700)]
sparc: Fix bus type probing for ESP and LE devices.
If there is a dummy "espdma" or "ledma" parent device above ESP scsi
or LE ethernet device nodes, we have to match the bus as SBUS.
Otherwise the address and size cell counts are wrong and we don't
calculate the final physical device resource values correctly at all.
Commit
5280267c1dddb8d413595b87dc406624bb497946 ("sparc: Fix handling
of LANCE and ESP parent nodes in of_device.c") was meant to fix this
problem, but that only influences the inner loop of
build_device_resources(). We need this logic to also kick in at the
beginning of build_device_resources() as well, when we make the first
attempt to determine the device's immediate parent bus type for 'reg'
property element extraction.
Based almost entirely upon a patch by Friedrich Oslage.
Tested-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso [Wed, 22 Apr 2009 09:26:37 +0000 (02:26 -0700)]
netfilter: ctnetlink: fix gcc warning during compilation
This patch fixes a (bogus?) gcc warning during compilation:
net/netfilter/nf_conntrack_netlink.c:1234: warning: 'helpname' may be used uninitialized in this function
net/netfilter/nf_conntrack_netlink.c:991: warning: 'helpname' may be used uninitialized in this function
In fact, helpname is initialized by ctnetlink_parse_help() so
I cannot see a way to use it without being initialized.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jean Delvare [Wed, 22 Apr 2009 07:49:51 +0000 (00:49 -0700)]
net/netrom: Fix socket locking
Patch "af_rose/x25: Sanity check the maximum user frame size"
(commit
83e0bbcbe2145f160fbaa109b0439dae7f4a38a9) from Alan Cox got
locking wrong. If we bail out due to user frame size being too large,
we must unlock the socket beforehand.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Moore [Tue, 21 Apr 2009 10:04:22 +0000 (10:04 +0000)]
netlabel: Always remove the correct address selector
The NetLabel address selector mechanism has a problem where it can get
mistakenly remove the wrong selector when similar addresses are used. The
problem is caused when multiple addresses are configured that have different
netmasks but the same address, e.g. 127.0.0.0/8 and 127.0.0.0/24. This patch
fixes the problem.
Reported-by: Etienne Basset <etienne.basset@numericable.fr>
Signed-off-by: Paul Moore <paul.moore@hp.com>
Acked-by: James Morris <jmorris@namei.org>
Tested-by: Etienne Basset <etienne.basset@numericable.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiko Schocher [Mon, 20 Apr 2009 22:36:43 +0000 (22:36 +0000)]
ucc_geth.c: Fix upsmr setting in RMII mode
If using the UCC on a MPC8360 in RMII mode, don;t set
UCC_GETH_UPSMR_RPM bit in the upsmr register.
Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Li Yang <leoli@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jianjun kong [Mon, 20 Apr 2009 23:48:25 +0000 (23:48 +0000)]
8139too: fix HW initial flow
While ifconfig eth0 up kernel calls open() of 8139 driver(8139too.c).
In rtl8139_hw_start() of rtl8139_open(), 8139 driver enable RX before
setting up the DMA buffer address. In this interval where RX was
enabled and DMA buffer address is not yet set up, any incoming
broadcast packet would be send to a strange physical address:
0x003e8800 which is the default value of DMA buffer address.
Unfortunately, this address is used by Linux kernel. So kernel panics.
This patch fix it by setting up DMA buffer address before RX enabled
and everything is fine even under broadcast packets attack.
Signed-off-by: Jonathan Lin <jon.lin@vatics.com>
Signed-off-by: Amos Kong <jianjun@zeuux.org>
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Takashi Iwai [Wed, 22 Apr 2009 07:09:29 +0000 (09:09 +0200)]
Merge commit 'alsa/master' into for-linus
* commit 'alsa/master':
[ALSA] intel8x0: another attempt to fix ac97_clock measure routine
[ALSA] ac97_codec: increase timeout for analog subsections
Hendrik Brueckner [Tue, 21 Apr 2009 06:04:24 +0000 (06:04 +0000)]
af_iucv: Fix race when queuing incoming iucv messages
AF_IUCV runs into a race when queuing incoming iucv messages
and receiving the resulting backlog.
If the Linux system is under pressure (high load or steal time),
the message queue grows up, but messages are not received and queued
onto the backlog queue. In that case, applications do not
receive any data with recvmsg() even if AF_IUCV puts incoming
messages onto the message queue.
The race can be avoided if the message queue spinlock in the
message_pending callback is spreaded across the entire callback
function.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hendrik Brueckner [Tue, 21 Apr 2009 06:04:23 +0000 (06:04 +0000)]
af_iucv: Test additional sk states in iucv_sock_shutdown
Add few more sk states in iucv_sock_shutdown().
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hendrik Brueckner [Tue, 21 Apr 2009 06:04:22 +0000 (06:04 +0000)]
af_iucv: Reject incoming msgs if RECV_SHUTDOWN is set
Reject incoming iucv messages if the receive direction has been shut down.
It avoids that the queue of outstanding messages increases and exceeds the
message limit of the iucv communication path.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hendrik Brueckner [Tue, 21 Apr 2009 06:04:21 +0000 (06:04 +0000)]
af_iucv: fix oops in iucv_sock_recvmsg() for MSG_PEEK flag
If iucv_sock_recvmsg() is called with MSG_PEEK flag set, the skb is enqueued
twice. If the socket is then closed, the pointer to the skb is freed twice.
Remove the skb_queue_head() call for MSG_PEEK, because the skb_recv_datagram()
function already handles MSG_PEEK (does not dequeue the skb).
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Tue, 21 Apr 2009 06:04:20 +0000 (06:04 +0000)]
af_iucv: consider state IUCV_CLOSING when closing a socket
Make sure a second invocation of iucv_sock_close() guarantees proper
freeing of an iucv path.
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jeff Moyer [Tue, 21 Apr 2009 05:31:56 +0000 (07:31 +0200)]
cfq-iosched: use the default seek distance when there aren't enough seek samples
If the cfq io context doesn't have enough samples yet to provide a mean
seek distance, then use the default threshold we have for seeky IO instead
of defaulting to 0.
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Jeff Moyer [Tue, 21 Apr 2009 05:25:04 +0000 (07:25 +0200)]
cfq-iosched: make seek_mean converge more quickly
Right now, depending on the first sector to which a process issues I/O,
the seek time may start out way out of whack. So make sure we start
with 0 sectors in seek, instead of the offset of the first request
issued.
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Jens Axboe [Fri, 17 Apr 2009 06:36:50 +0000 (08:36 +0200)]
block: make blk_abort_queue() ignore non-request based devices
There's nothing to do for those devices, since the timeout handling is
based on requests.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Tejun Heo [Fri, 17 Apr 2009 06:34:48 +0000 (08:34 +0200)]
block: include empty disks in /proc/diskstats
/proc/diskstats used to show stats for all disks whether they're
zero-sized or not and their non-zero partitions. Commit
074a7aca7afa6f230104e8e65eba3420263714a5 accidentally changed the
behavior such that it doesn't print out zero sized disks. This patch
implements DISK_PITER_INCL_EMPTY_PART0 flag to partition iterator and
uses it in diskstats_show() such that empty part0 is shown in
/proc/diskstats.
Reported and bisectd by Dianel Collins.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Daniel Collins <solemnwarning@solemnwarning.no-ip.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Tejun Heo [Wed, 15 Apr 2009 13:10:27 +0000 (22:10 +0900)]
bio: use bio_kmalloc() in copy/map functions
Impact: remove possible deadlock condition
There is no reason to use mempool backed allocation for map functions.
Also, because kern mapping is used inside LLDs (e.g. for EH), using
mempool backed allocation can lead to deadlock under extreme
conditions (mempool already consumed by the time a request reached EH
and requests are blocked on EH).
Switch copy/map functions to bio_kmalloc().
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Tejun Heo [Wed, 15 Apr 2009 17:50:51 +0000 (19:50 +0200)]
bio: fix bio_kmalloc()
Impact: fix bio_kmalloc() and its destruction path
bio_kmalloc() was broken in two ways.
* bvec_alloc_bs() first allocates bvec using kmalloc() and then
ignores it and allocates again like non-kmalloc bvecs.
* bio_kmalloc_destructor() didn't check for and free bio integrity
data.
This patch fixes the above problems. kmalloc patch is separated out
from bio_alloc_bioset() and allocates the requested number of bvecs as
inline bvecs.
* bio_alloc_bioset() no longer takes NULL @bs. None other than
bio_kmalloc() used it and outside users can't know how it was
allocated anyway.
* Define and use BIO_POOL_NONE so that pool index check in
bvec_free_bs() triggers if inline or kmalloc allocated bvec gets
there.
* Relocate destructors on top of each allocation function so that how
they're used is more clear.
Jens Axboe suggested allocating bvecs inline.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Tejun Heo [Wed, 15 Apr 2009 13:10:25 +0000 (22:10 +0900)]
block: fix queue bounce limit setting
Impact: don't set GFP_DMA in q->bounce_gfp unnecessarily
All DMA address limits are expressed in terms of the last addressable
unit (byte or page) instead of one plus that. However, when
determining bounce_gfp for 64bit machines in blk_queue_bounce_limit(),
it compares the specified limit against 0x100000000UL to determine
whether it's below 4G ending up falsely setting GFP_DMA in
q->bounce_gfp.
As DMA zone is very small on x86_64, this makes larger SG_IO transfers
very eager to trigger OOM killer. Fix it. While at it, rename the
parameter to @dma_mask for clarity and convert comment to proper
winged style.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Tejun Heo [Wed, 15 Apr 2009 13:10:24 +0000 (22:10 +0900)]
block: fix SG_IO vector request data length handling
Impact: fix SG_IO behavior such that it matches the documentation
SG_IO howto says that if ->dxfer_len and sum of iovec disagress, the
shorter one wins. However, the current implementation returns -EINVAL
for such cases. Trim iovc if it's longer than ->dxfer_len.
This patch uses iov_*() helpers which take struct iovec * by casting
struct sg_iovec * to it. sg_iovec is always identical to iovec and
this will be further cleaned up with later patches.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Tejun Heo [Wed, 15 Apr 2009 13:10:23 +0000 (22:10 +0900)]
scatterlist: make sure sg_miter_next() doesn't return 0 sized mappings
Impact: fix not-so-critical but annoying bug
sg_miter_next() returns 0 sized mapping if there is an zero sized sg
entry in the list or at the end of each iteration. As the users
always check the ->length field, this bug shouldn't be critical other
than causing unnecessary iteration.
Fix it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Bartlomiej Zolnierkiewicz [Tue, 21 Apr 2009 09:04:37 +0000 (09:04 +0000)]
powerpc: Fix modular build of ide-pmac when mediabay is built in
Now that the powermac IDE host driver can be modular, we need to
export check_media_bay_by_base() and media_bay_set_ide_infos()
from drivers/macintosh/mediabay.c for it.
This fixes the following build error:
> CC [M] drivers/ide/pmac.o
> drivers/ide/pmac.c: In function ‘pmac_ide_init_dev’:
> drivers/ide/pmac.c:955: error: implicit declaration of function
> ‘check_media_bay_by_base’
> drivers/ide/pmac.c: In function ‘pmac_ide_setup_device’:
> drivers/ide/pmac.c:1090: error: implicit declaration of function
> ‘media_bay_set_ide_infos’
> make[2]: *** [drivers/ide/pmac.o] Error 1
> make[1]: *** [drivers/ide] Error 2
> make: *** [drivers] Error 2
Reported-by: Subrata Modak <subrata@linux.vnet.ibm.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Geoff Levand [Fri, 17 Apr 2009 06:36:37 +0000 (06:36 +0000)]
powerpc/pasemi: Fix build error on UP
A non-SMP version of smp_send_stop() is now included in smp.h.
Remove the unneeded definition in the pasemi setup.c.
Fixes build errors like these when CONFIG_SMP=n:
arch/powerpc/platforms/pasemi/setup.c:48: error: redefinition of ‘smp_send_stop’
include/linux/smp.h:125: error: previous definition of 'smp_send_stop' was here
Reported-by: subrata@linux.vnet.ibm.com
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Alexander Beregalov [Fri, 17 Apr 2009 00:15:13 +0000 (00:15 +0000)]
powerpc: Make macintosh/mediabay driver depend on CONFIG_BLOCK
Fixes this build error:
In file included from drivers/macintosh/mediabay.c:21:
include/linux/ide.h:605: error: field 'request_sense_rq' has incomplete type
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Geoff Levand [Thu, 16 Apr 2009 09:05:40 +0000 (09:05 +0000)]
maintainers: Fix PS3 patterns
Correct the MAINTAINERS file patterns for PS3. Removes some PS3
patterns that were under 'CELL BROADBAND ENGINE ARCHITECTURE', and
adds missing PS3 sound and RTC driver patterns.
CC: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Geoff Levand [Thu, 16 Apr 2009 09:05:38 +0000 (09:05 +0000)]
powerpc/ps3: Fix CONFIG_PS3_FLASH=n build warning
Fix build warnings like these when CONFIG_PS3_FLASH=n:
arch/powerpc/platforms/ps3/os-area.c: warning: 'update_flash_db' defined but not used
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Andreas Schwab [Thu, 16 Apr 2009 06:22:01 +0000 (06:22 +0000)]
powerpc/32: Don't clobber personality flags on exec
Now that ppc32 implements address randomization it also wants to inherit
personality flags like ADDR_NO_RANDOMIZE across exec, for things like
`setarch ppc -R' to work. But the ppc32 version of SET_PERSONALITY
forcefully sets PER_LINUX, clearing all personality flags. So be
careful about preserving the flags.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Michael Ellerman [Thu, 16 Apr 2009 04:47:32 +0000 (04:47 +0000)]
powerpc: Fix crash on CPU hotplug
early_init_mmu_secondary() is called at CPU hotplug time, so it
must be marked as __cpuinit, not __init.
Caused by
757c74d2 ("powerpc/mm: Introduce early_init_mmu() on 64-bit").
Tested-by: Sachin Sant <sachinp@in.ibm.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Linus Torvalds [Wed, 22 Apr 2009 03:07:00 +0000 (20:07 -0700)]
Linux 2.6.30-rc3
Paul Mackerras [Wed, 22 Apr 2009 03:02:09 +0000 (13:02 +1000)]
Merge branch 'merge' of git://git.secretlab.ca/git/linux-2.6 into merge
Arjan van de Ven [Tue, 21 Apr 2009 20:32:54 +0000 (13:32 -0700)]
driver synchronization: make scsi_wait_scan more advanced
There is currently only one way for userspace to say "wait for my storage
device to get ready for the modules I just loaded": to load the
scsi_wait_scan module. Expectations of userspace are that once this
module is loaded, all the (storage) devices for which the drivers
were loaded before the module load are present.
Now, there are some issues with the implementation, and the async
stuff got caught in the middle of this: The existing code only
waits for the scsy async probing to finish, but it did not take
into account at all that probing might not have begun yet.
(Russell ran into this problem on his computer and the fix works for him)
This patch fixes this more thoroughly than the previous "fix", which
had some bad side effects (namely, for kernel code that wanted to wait for
the scsi scan it would also do an async sync, which would deadlock if you did
it from async context already.. there's a report about that on lkml):
The patch makes the module first wait for all device driver probes, and then it
will wait for the scsi parallel scan to finish.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jonathan Corbet [Tue, 21 Apr 2009 22:30:32 +0000 (16:30 -0600)]
Trivial: fix a typo in slow-work.h
Fix a comment typo in slow-work.h
...a trivial mistake, but it will mess up kerneldoc if nothing else.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Tue, 21 Apr 2009 22:00:29 +0000 (23:00 +0100)]
PERCPU: Collect the DECLARE/DEFINE declarations together
Collect the DECLARE/DEFINE declarations together in linux/percpu-defs.h so
that they're in one place, and give them descriptive comments, particularly
the SHARED_ALIGNED variant.
It would be nice to collect these in linux/percpu.h, but that's not possible
without sorting out the severe #include recursion between the x86 arch headers
and the general headers (and possibly other arches too).
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Tue, 21 Apr 2009 22:00:24 +0000 (23:00 +0100)]
FRV: Fix the section attribute on UP DECLARE_PER_CPU()
In non-SMP mode, the variable section attribute specified by DECLARE_PER_CPU()
does not agree with that specified by DEFINE_PER_CPU(). This means that
architectures that have a small data section references relative to a base
register may throw up linkage errors due to too great a displacement between
where the base register points and the per-CPU variable.
On FRV, the .h declaration says that the variable is in the .sdata section, but
the .c definition says it's actually in the .data section. The linker throws
up the following errors:
kernel/built-in.o: In function `release_task':
kernel/exit.c:78: relocation truncated to fit: R_FRV_GPREL12 against symbol `per_cpu__process_counts' defined in .data section in kernel/built-in.o
kernel/exit.c:78: relocation truncated to fit: R_FRV_GPREL12 against symbol `per_cpu__process_counts' defined in .data section in kernel/built-in.o
To fix this, DECLARE_PER_CPU() should simply apply the same section attribute
as does DEFINE_PER_CPU(). However, this is made slightly more complex by
virtue of the fact that there are several variants on DEFINE, so these need to
be matched by variants on DECLARE.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 21 Apr 2009 21:12:58 +0000 (14:12 -0700)]
Merge git://git./linux/kernel/git/mason/btrfs-unstable
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
Btrfs: fix btrfs fallocate oops and deadlock
Btrfs: use the right node in reada_for_balance
Btrfs: fix oops on page->mapping->host during writepage
Btrfs: add a priority queue to the async thread helpers
Btrfs: use WRITE_SYNC for synchronous writes
Linus Torvalds [Tue, 21 Apr 2009 21:12:43 +0000 (14:12 -0700)]
Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
go7007: Convert to the new i2c device binding model
Kumar Gala [Wed, 15 Apr 2009 21:48:50 +0000 (16:48 -0500)]
powerpc/85xx: Remove defconfigs that mpc85xx_{smp_}defconfig cover
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Wed, 15 Apr 2009 21:33:08 +0000 (16:33 -0500)]
powerpc/85xx: Added SMP defconfig
Since the vast majority of 85xx platforms are UP we introduce a new SMP
config for the few platforms that have more than one core. Beyond
CONFIG_SMP=y and its dependencies this should be identical to
mpc85xx_defconfig.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Tue, 21 Apr 2009 20:40:51 +0000 (15:40 -0500)]
powerpc/85xx: Enabled a bunch of FSL specific drivers/options
* Add new 85xx boards
* Added QE/FSL gpio
* Enabled PHY drivers that exist on various boards
* Enabled FS_ENET & UCC ethernet drivers (CPM2 & QE)
* FSL HW Crypto Engine
* CPM I2C
* QE Serial
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Wed, 15 Apr 2009 21:10:20 +0000 (16:10 -0500)]
powerpc/85xx: Updated generic mpc85xx_defconfig
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Reinette Chatre [Tue, 21 Apr 2009 17:55:48 +0000 (10:55 -0700)]
iwlwifi: DMA fixes
A few issues wrt DMA were uncovered when using the driver with swiotlb.
- driver should not use memory after it has been mapped
- iwl3945's RX queue management cannot use all of iwlagn because
the size of the RX buffer is different. Revert back to using
iwl3945 specific routines that map/unmap memory.
- no need to "dma_syn_single_range_for_cpu" followed by pci_unmap_single,
we can just call pci_unmap_single initially
- only map the memory area that will be used by device. this is especially
relevant to the mapping of iwl_cmd. we should not map the entire
structure because the meta data at the beginning of structure contains
the address to be used later for unmapping. If the address to be used for
unmapping is stored in mapped data it creates a problem.
- ensure that _if_ memory needs to be modified after it is mapped that we
call _sync_single_for_cpu first, and then release it back to device with
_sync_single_for_device
- we mapped the wrong length of data for host commands, with mapped length
differing with length provided to device, fix that.
Thanks to Jason Andryuk <jandryuk@gmail.com> for significant bisecting
help to find these issues.
This fixes http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1964
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Jason Andryuk <jandryuk@gmail.com>
Tested-by: Ben Gamari <bgamari@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Reinette Chatre [Tue, 21 Apr 2009 17:55:47 +0000 (10:55 -0700)]
iwlwifi: add debugging for TX path
When debugging TX issues it is helpful to know the seq nr of the
frame being transmitted. The seq nr is printed as part of ucode's
log informing us which frame is being processed. Having this information
printed in driver log makes it easy to match activities between driver
and firmware.
Also make possible to print TX flags directly. These are already printed
as part of entire TX command, but having it printed directly in cpu format
makes it easier to look at.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rami Rosen [Tue, 21 Apr 2009 13:22:01 +0000 (16:22 +0300)]
mwl8: fix build warning.
This patch fixes a build warning in mwl8.c.
(Marvell TOPDOG wireless driver)
The warning it fixes is: "large integer implicitly truncated to unsigned type."
The rx_ctrl member of the mwl8k_rx_desc struct is 8 bit (__u8 ), whereas trying
to assign it a 32 bit value (which is returned from cpu_to_le32())
causes the compiler to issue
a truncation warning.
Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Mon, 20 Apr 2009 23:36:59 +0000 (01:36 +0200)]
mac80211: fix alignment calculation bug
When checking whether or not a given frame needs to be
moved to be properly aligned to a 4-byte boundary, we
use & 4 which wasn't intended, this code should check
the lowest two bits.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Reinette Chatre [Mon, 20 Apr 2009 22:36:19 +0000 (15:36 -0700)]
mac80211: do not print WARN if config interface
It is expected that config interface will always succeed as mac80211
will only request what driver supports. The exception here is when a
device has rfkill enabled. At this time the rfkill state is unknown to
mac80211 and config interface can fail. When this happens we deal with
this error instead of printing a WARN.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Reinette Chatre [Mon, 20 Apr 2009 21:37:01 +0000 (14:37 -0700)]
iwl3945: use cancel_delayed_work_sync to cancel rfkill_poll
Users reported lockup with work still trying to run
after module has been unloaded.
http://thread.gmane.org/gmane.linux.kernel.wireless.general/30594/focus=30601
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reported-by: TJ <ubuntu@tjworld.net>
Reported-by: Huaxu Wan <huaxu.wan@linux.intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Jay Sternberg [Mon, 20 Apr 2009 21:36:54 +0000 (14:36 -0700)]
iwlwifi: fix EEPROM validation mask to include OTP only devices
Fix the bug where some revisions of 6000 series hardware cannot
be used. Later versions of 6000 series have the EEPROM replaced by
OTP. For these devices to be used we need to expand valid EEPROM mask.
Signed-off-by: Jay Sternberg <jay.e.sternberg@linux.intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Roel Kluin [Tue, 21 Apr 2009 19:24:58 +0000 (12:24 -0700)]
bfin_5xx: misplaced parentheses
`!' has a higher precedence than `&', parentheses are misplaced.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: Sonic Zhang <sonic.zhang@analog.com>
Cc: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
KOSAKI Motohiro [Tue, 21 Apr 2009 19:24:57 +0000 (12:24 -0700)]
vmscan,memcg: reintroduce sc->may_swap
Commit
a6dc60f8975ad96d162915e07703a4439c80dcf0 ("vmscan: rename
sc.may_swap to may_unmap") removed the may_swap flag, but memcg had used
it as a flag for "we need to use swap?", as the name indicate.
And in the current implementation, memcg cannot reclaim mapped file
caches when mem+swap hits the limit.
re-introduce may_swap flag and handle it at get_scan_ratio(). This
patch doesn't influence any scan_control users other than memcg.
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dave Jiang [Tue, 21 Apr 2009 19:24:56 +0000 (12:24 -0700)]
edac: ppc mpc85xx fix mc err detect
Error found by Jeff Haran.
The error detect register is 0s when no errors are detected. The check
code is incorrect, so reverse check sense.
Reported-by: Jeff Haran <jharan@Brocade.COM>
Signed-off-by: Dave Jiang <djiang@mvista.com>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Paris [Tue, 21 Apr 2009 19:24:54 +0000 (12:24 -0700)]
scsi: mpt: suppress debugobjects warning
Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13133
ODEBUG: object is on stack, but not annotated
------------[ cut here ]------------
WARNING: at lib/debugobjects.c:253 __debug_object_init+0x1f3/0x276()
Hardware name: VMware Virtual Platform
Modules linked in: mptspi(+) mptscsih mptbase scsi_transport_spi ext3 jbd mbcache
Pid: 540, comm: insmod Not tainted 2.6.28-mm1 #2
Call Trace:
[<
c042c51c>] warn_slowpath+0x74/0x8a
[<
c0469600>] ? start_critical_timing+0x96/0xb7
[<
c060c8ea>] ? _spin_unlock_irqrestore+0x2f/0x3c
[<
c0446fad>] ? trace_hardirqs_off_caller+0x18/0xaf
[<
c044704f>] ? trace_hardirqs_off+0xb/0xd
[<
c060c8ea>] ? _spin_unlock_irqrestore+0x2f/0x3c
[<
c042cb84>] ? release_console_sem+0x1a5/0x1ad
[<
c05013e6>] __debug_object_init+0x1f3/0x276
[<
c0501494>] debug_object_init+0x13/0x17
[<
c0433c56>] init_timer+0x10/0x1a
[<
e08e5b54>] mpt_config+0x1c1/0x2b7 [mptbase]
[<
e08e3b82>] ? kmalloc+0x8/0xa [mptbase]
[<
e08e3b82>] ? kmalloc+0x8/0xa [mptbase]
[<
e08e6fa2>] mpt_do_ioc_recovery+0x950/0x1212 [mptbase]
[<
c04496c2>] ? __lock_acquire+0xa69/0xacc
[<
c060c8f1>] ? _spin_unlock_irqrestore+0x36/0x3c
[<
c060c3af>] ? _spin_unlock_irq+0x22/0x26
[<
c04f2d8b>] ? string+0x2b/0x76
[<
c04f310e>] ? vsnprintf+0x338/0x7b3
[<
c04496c2>] ? __lock_acquire+0xa69/0xacc
[<
c060c8ea>] ? _spin_unlock_irqrestore+0x2f/0x3c
[<
c04496c2>] ? __lock_acquire+0xa69/0xacc
[<
c044897d>] ? debug_check_no_locks_freed+0xeb/0x105
[<
c060c8f1>] ? _spin_unlock_irqrestore+0x36/0x3c
[<
c04488bc>] ? debug_check_no_locks_freed+0x2a/0x105
[<
c0446b8c>] ? lock_release_holdtime+0x43/0x48
[<
c043f742>] ? up_read+0x16/0x29
[<
c05076f8>] ? pci_get_slot+0x66/0x72
[<
e08e89ca>] mpt_attach+0x881/0x9b1 [mptbase]
[<
e091c8e5>] mptspi_probe+0x11/0x354 [mptspi]
Noticing that every caller of mpt_config has its CONFIGPARMS struct
declared on the stack and thus the &pCfg->timer is always on the stack I
changed init_timer() to init_timer_on_stack() and it seems to have shut
up.....
Cc: "Moore, Eric Dean" <Eric.Moore@lsil.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: "Desai, Kashyap" <Kashyap.Desai@lsi.com>
Cc: <stable@kernel.org> [2.6.29.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>