mm: fix 100% CPU kswapd busyloop on unreclaimable nodes

commit c73322d098e4b6f5f0f0fa1330bf57e218775539 upstream.

Patch series "mm: kswapd spinning on unreclaimable nodes - fixes and
cleanups".

Jia reported a scenario in which the kswapd of a node indefinitely spins
at 100% CPU usage.  We have seen similar cases at Facebook.

The kernel's current method of judging its ability to reclaim a node (or
whether to back off and sleep) is based on the amount of scanned pages
in proportion to the amount of reclaimable pages.  In Jia's and our
scenarios, there are no reclaimable pages in the node, however, and the
condition for backing off is never met.  Kswapd busyloops in an attempt
to restore the watermarks while having nothing to work with.

This series reworks the definition of an unreclaimable node based not on
scanning but on whether kswapd is able to actually reclaim pages in
MAX_RECLAIM_RETRIES (16) consecutive runs.  This is the same criteria
the page allocator uses for giving up on direct reclaim and invoking the
OOM killer.  If it cannot free any pages, kswapd will go to sleep and
leave further attempts to direct reclaim invocations, which will either
make progress and re-enable kswapd, or invoke the OOM killer.

Patch #1 fixes the immediate problem Jia reported, the remainder are
smaller fixlets, cleanups, and overall phasing out of the old method.

Patch #6 is the odd one out.  It's a nice cleanup to get_scan_count(),
and directly related to #5, but in itself not relevant to the series.

If the whole series is too ambitious for 4.11, I would consider the
first three patches fixes, the rest cleanups.

This patch (of 9):

Jia He reports a problem with kswapd spinning at 100% CPU when
requesting more hugepages than memory available in the system:

$ echo 4000 >/proc/sys/vm/nr_hugepages

top - 13:42:59 up  3:37,  1 user,  load average: 1.09, 1.03, 1.01
Tasks:   1 total,   1 running,   0 sleeping,   0 stopped,   0 zombie
%Cpu(s):  0.0 us, 12.5 sy,  0.0 ni, 85.5 id,  2.0 wa,  0.0 hi,  0.0 si,  0.0 st
KiB Mem:  31371520 total, 30915136 used,   456384 free,      320 buffers
KiB Swap:  6284224 total,   115712 used,  6168512 free.    48192 cached Mem

  PID USER      PR  NI    VIRT    RES    SHR S  %CPU  %MEM     TIME+ COMMAND
   76 root      20   0       0      0      0 R 100.0 0.000 217:17.29 kswapd3

At that time, there are no reclaimable pages left in the node, but as
kswapd fails to restore the high watermarks it refuses to go to sleep.

Kswapd needs to back away from nodes that fail to balance.  Up until
commit 1d82de618ddd ("mm, vmscan: make kswapd reclaim in terms of
nodes") kswapd had such a mechanism.  It considered zones whose
theoretically reclaimable pages it had reclaimed six times over as
unreclaimable and backed away from them.  This guard was erroneously
removed as the patch changed the definition of a balanced node.

However, simply restoring this code wouldn't help in the case reported
here: there *are* no reclaimable pages that could be scanned until the
threshold is met.  Kswapd would stay awake anyway.

Introduce a new and much simpler way of backing off.  If kswapd runs
through MAX_RECLAIM_RETRIES (16) cycles without reclaiming a single
page, make it back off from the node.  This is the same number of shots
direct reclaim takes before declaring OOM.  Kswapd will go to sleep on
that node until a direct reclaimer manages to reclaim some pages, thus
proving the node reclaimable again.

[hannes@cmpxchg.org: check kswapd failure against the cumulative nr_reclaimed count]
Link: http://lkml.kernel.org/r/20170306162410.GB2090@cmpxchg.org
[shakeelb@google.com: fix condition for throttle_direct_reclaim]
Link: http://lkml.kernel.org/r/20170314183228.20152-1-shakeelb@google.com
Link: http://lkml.kernel.org/r/20170228214007.5621-2-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reported-by: Jia He <hejianet@gmail.com>
Tested-by: Jia He <hejianet@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Dmitry Shmidt <dimitrysh@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "module: Add retpoline tag to VERMAGIC"

commit 5132ede0fe8092b043dae09a7cc32b8ae7272baa upstream.

This reverts commit 6cfb521ac0d5b97470883ff9b7facae264b7ab12.

Turns out distros do not want to make retpoline as part of their "ABI",
so this patch should not have been merged.  Sorry Andi, this was my
fault, I suggested it when your original patch was the "correct" way of
doing this instead.

Reported-by: Jiri Kosina <jikos@kernel.org>
Fixes: 6cfb521ac0d5 ("module: Add retpoline tag to VERMAGIC")
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: rusty@rustcorp.com.au
Cc: arjan.van.de.ven@intel.com
Cc: jeyu@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: libiscsi: fix shifting of DID_REQUEUE host byte

commit eef9ffdf9cd39b2986367bc8395e2772bc1284ba upstream.

The SCSI host byte should be shifted left by 16 in order to have
scsi_decide_disposition() do the right thing (.i.e. requeue the
command).

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Fixes: 661134ad3765 ("[SCSI] libiscsi, bnx2i: make bound ep check common")
Cc: Lee Duncan <lduncan@suse.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Bart Van Assche <Bart.VanAssche@sandisk.com>
Cc: Chris Leech <cleech@redhat.com>
Acked-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/fcntl: f_setown, avoid undefined behaviour

commit fc3dc67471461c0efcb1ed22fb7595121d65fad9 upstream.

fcntl(0, F_SETOWN, 0x80000000) triggers:
UBSAN: Undefined behaviour in fs/fcntl.c:118:7
negation of -2147483648 cannot be represented in type 'int':
CPU: 1 PID: 18261 Comm: syz-executor Not tainted 4.8.1-0-syzkaller #1
...
Call Trace:
...
 [<ffffffffad8f0868>] ? f_setown+0x1d8/0x200
 [<ffffffffad8f19a9>] ? SyS_fcntl+0x999/0xf30
 [<ffffffffaed1fb00>] ? entry_SYSCALL_64_fastpath+0x23/0xc1

Fix that by checking the arg parameter properly (against INT_MAX) before
"who = -who". And return immediatelly with -EINVAL in case it is wrong.
Note that according to POSIX we can return EINVAL:
    http://pubs.opengroup.org/onlinepubs/9699919799/functions/fcntl.html

    [EINVAL]
        The cmd argument is F_SETOWN and the value of the argument
        is not valid as a process or process group identifier.

[v2] returns an error, v1 used to fail silently
[v3] implement proper check for the bad value INT_MIN

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Jeff Layton <jlayton@poochiereds.net>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

reiserfs: don't preallocate blocks for extended attributes

commit 54930dfeb46e978b447af0fb8ab4e181c1bf9d7a upstream.

Most extended attributes will fit in a single block.  More importantly,
we drop the reference to the inode while holding the transaction open
so the preallocated blocks aren't released.  As a result, the inode
may be evicted before it's removed from the transaction's prealloc list
which can cause memory corruption.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

reiserfs: fix race in prealloc discard

commit 08db141b5313ac2f64b844fb5725b8d81744b417 upstream.

The main loop in __discard_prealloc is protected by the reiserfs write lock
which is dropped across schedules like the BKL it replaced.  The problem is
that it checks the value, calls a routine that schedules, and then adjusts
the state.  As a result, two threads that are calling
reiserfs_prealloc_discard at the same time can race when one calls
reiserfs_free_prealloc_block, the lock is dropped, and the other calls
reiserfs_free_prealloc_block with the same block number.  In the right
circumstances, it can cause the prealloc count to go negative.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: xt_osf: Add missing permission checks

commit 916a27901de01446bcf57ecca4783f6cff493309 upstream.

The capability check in nfnetlink_rcv() verifies that the caller
has CAP_NET_ADMIN in the namespace that "owns" the netlink socket.
However, xt_osf_fingers is shared by all net namespaces on the
system.  An unprivileged user can create user and net namespaces
in which he holds CAP_NET_ADMIN to bypass the netlink_net_capable()
check:

    vpnns -- nfnl_osf -f /tmp/pf.os

    vpnns -- nfnl_osf -f /tmp/pf.os -d

These non-root operations successfully modify the systemwide OS
fingerprint list.  Add new capable() checks so that they can't.

Signed-off-by: Kevin Cernekee <cernekee@chromium.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nfnetlink_cthelper: Add missing permission checks

commit 4b380c42f7d00a395feede754f0bc2292eebe6e5 upstream.

The capability check in nfnetlink_rcv() verifies that the caller
has CAP_NET_ADMIN in the namespace that "owns" the netlink socket.
However, nfnl_cthelper_list is shared by all net namespaces on the
system.  An unprivileged user can create user and net namespaces
in which he holds CAP_NET_ADMIN to bypass the netlink_net_capable()
check:

    $ nfct helper list
    nfct v1.4.4: netlink error: Operation not permitted
    $ vpnns -- nfct helper list
    {
            .name = ftp,
            .queuenum = 0,
            .l3protonum = 2,
            .l4protonum = 6,
            .priv_data_len = 24,
            .status = enabled,
    };

Add capable() checks in nfnetlink_cthelper, as this is cleaner than
trying to generalize the solution.

Signed-off-by: Kevin Cernekee <cernekee@chromium.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPICA: Namespace: fix operand cache leak

commit 3b2d69114fefa474fca542e51119036dceb4aa6f upstream.

ACPICA commit a23325b2e583556eae88ed3f764e457786bf4df6

I found some ACPI operand cache leaks in ACPI early abort cases.

Boot log of ACPI operand cache leak is as follows:
>[    0.174332] ACPI: Added _OSI(Module Device)
>[    0.175504] ACPI: Added _OSI(Processor Device)
>[    0.176010] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.177032] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.178284] ACPI: SCI (IRQ16705) allocation failed
>[    0.179352] ACPI Exception: AE_NOT_ACQUIRED, Unable to install
System Control Interrupt handler (20160930/evevent-131)
>[    0.180008] ACPI: Unable to start the ACPI Interpreter
>[    0.181125] ACPI Error: Could not remove SCI handler
(20160930/evmisc-281)
>[    0.184068] kmem_cache_destroy Acpi-Operand: Slab cache still has
objects
>[    0.185358] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.10.0-rc3 #2
>[    0.186820] Hardware name: innotek gmb_h virtual_box/virtual_box, BIOS
virtual_box 12/01/2006
>[    0.188000] Call Trace:
>[    0.188000]  ? dump_stack+0x5c/0x7d
>[    0.188000]  ? kmem_cache_destroy+0x224/0x230
>[    0.188000]  ? acpi_sleep_proc_init+0x22/0x22
>[    0.188000]  ? acpi_os_delete_cache+0xa/0xd
>[    0.188000]  ? acpi_ut_delete_caches+0x3f/0x7b
>[    0.188000]  ? acpi_terminate+0x5/0xf
>[    0.188000]  ? acpi_init+0x288/0x32e
>[    0.188000]  ? __class_create+0x4c/0x80
>[    0.188000]  ? video_setup+0x7a/0x7a
>[    0.188000]  ? do_one_initcall+0x4e/0x1b0
>[    0.188000]  ? kernel_init_freeable+0x194/0x21a
>[    0.188000]  ? rest_init+0x80/0x80
>[    0.188000]  ? kernel_init+0xa/0x100
>[    0.188000]  ? ret_from_fork+0x25/0x30

When early abort is occurred due to invalid ACPI information, Linux kernel
terminates ACPI by calling acpi_terminate() function. The function calls
acpi_ns_terminate() function to delete namespace data and ACPI operand cache
(acpi_gbl_module_code_list).

But the deletion code in acpi_ns_terminate() function is wrapped in
ACPI_EXEC_APP definition, therefore the code is only executed when the
definition exists. If the define doesn't exist, ACPI operand cache
(acpi_gbl_module_code_list) is leaked, and stack dump is shown in kernel log.

This causes a security threat because the old kernel (<= 4.9) shows memory
locations of kernel functions in stack dump, therefore kernel ASLR can be
neutralized.

To fix ACPI operand leak for enhancing security, I made a patch which
removes the ACPI_EXEC_APP define in acpi_ns_terminate() function for
executing the deletion code unconditionally.

Link: https://github.com/acpica/acpica/commit/a23325b2
Signed-off-by: Seunghun Han <kkamagui@gmail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI / scan: Prefer devices without _HID/_CID for _ADR matching

commit c2a6bbaf0c5f90463a7011a295bbdb7e33c80b51 upstream.

The way acpi_find_child_device() works currently is that, if there
are two (or more) devices with the same _ADR value in the same
namespace scope (which is not specifically allowed by the spec and
the OS behavior in that case is not defined), the first one of them
found to be present (with the help of _STA) will be returned.

This covers the majority of cases, but is not sufficient if some of
the devices in question have a _HID (or _CID) returning some valid
ACPI/PNP device IDs (which is disallowed by the spec) and the
ASL writers' expectation appears to be that the OS will match
devices without a valid ACPI/PNP device ID against a given bus
address first.

To cover this special case as well, modify find_child_checks()
to prefer devices without ACPI/PNP device IDs over devices that
have them.

Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipc: msg, make msgrcv work with LONG_MIN

commit 999898355e08ae3b92dfd0a08db706e0c6703d30 upstream.

When LONG_MIN is passed to msgrcv, one would expect to recieve any
message.  But convert_mode does *msgtyp = -*msgtyp and -LONG_MIN is
undefined.  In particular, with my gcc -LONG_MIN produces -LONG_MIN
again.

So handle this case properly by assigning LONG_MAX to *msgtyp if
LONG_MIN was specified as msgtyp to msgrcv.

This code:
  long msg[] = { 100, 200 };
  int m = msgget(IPC_PRIVATE, IPC_CREAT | 0644);
  msgsnd(m, &msg, sizeof(msg), 0);
  msgrcv(m, &msg, sizeof(msg), LONG_MIN, 0);

produces currently nothing:

  msgget(IPC_PRIVATE, IPC_CREAT|0644)     = 65538
  msgsnd(65538, {100, "\310\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"}, 16, 0) = 0
  msgrcv(65538, ...

Except a UBSAN warning:

  UBSAN: Undefined behaviour in ipc/msg.c:745:13
  negation of -9223372036854775808 cannot be represented in type 'long int':

With the patch, I see what I expect:

  msgget(IPC_PRIVATE, IPC_CREAT|0644)     = 0
  msgsnd(0, {100, "\310\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"}, 16, 0) = 0
  msgrcv(0, {100, "\310\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"}, 16, -9223372036854775808, 0) = 16

Link: http://lkml.kernel.org/r/20161024082633.10148-1-jslaby@suse.cz
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm, page_alloc: fix potential false positive in __zone_watermark_ok

commit b050e3769c6b4013bb937e879fc43bf1847ee819 upstream.

Since commit 97a16fc82a7c ("mm, page_alloc: only enforce watermarks for
order-0 allocations"), __zone_watermark_ok() check for high-order
allocations will shortcut per-migratetype free list checks for
ALLOC_HARDER allocations, and return true as long as there's free page
of any migratetype.  The intention is that ALLOC_HARDER can allocate
from MIGRATE_HIGHATOMIC free lists, while normal allocations can't.

However, as a side effect, the watermark check will then also return
true when there are pages only on the MIGRATE_ISOLATE list, or (prior to
CMA conversion to ZONE_MOVABLE) on the MIGRATE_CMA list.  Since the
allocation cannot actually obtain isolated pages, and might not be able
to obtain CMA pages, this can result in a false positive.

The condition should be rare and perhaps the outcome is not a fatal one.
Still, it's better if the watermark check is correct.  There also
shouldn't be a performance tradeoff here.

Link: http://lkml.kernel.org/r/20171102125001.23708-1-vbabka@suse.cz
Fixes: 97a16fc82a7c ("mm, page_alloc: only enforce watermarks for order-0 allocations")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cma: fix calculation of aligned offset

commit e048cb32f69038aa1c8f11e5c1b331be4181659d upstream.

The align_offset parameter is used by bitmap_find_next_zero_area_off()
to represent the offset of map's base from the previous alignment
boundary; the function ensures that the returned index, plus the
align_offset, honors the specified align_mask.

The logic introduced by commit b5be83e308f7 ("mm: cma: align to physical
address, not CMA region position") has the cma driver calculate the
offset to the *next* alignment boundary.  In most cases, the base
alignment is greater than that specified when making allocations,
resulting in a zero offset whether we align up or down.  In the example
given with the commit, the base alignment (8MB) was half the requested
alignment (16MB) so the math also happened to work since the offset is
8MB in both directions.  However, when requesting allocations with an
alignment greater than twice that of the base, the returned index would
not be correctly aligned.

Also, the align_order arguments of cma_bitmap_aligned_mask() and
cma_bitmap_aligned_offset() should not be negative so the argument type
was made unsigned.

Fixes: b5be83e308f7 ("mm: cma: align to physical address, not CMA region position")
Link: http://lkml.kernel.org/r/20170628170742.2895-1-opendmb@gmail.com
Signed-off-by: Angus Clark <angus@angusclark.org>
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Gregory Fong <gregory.0xf0@gmail.com>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Angus Clark <angus@angusclark.org>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Shiraz Hashim <shashim@codeaurora.org>
Cc: Jaewon Kim <jaewon31.kim@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwpoison, memcg: forcibly uncharge LRU pages

commit 18365225f0440d09708ad9daade2ec11275c3df9 upstream.

Laurent Dufour has noticed that hwpoinsoned pages are kept charged.  In
his particular case he has hit a bad_page("page still charged to
cgroup") when onlining a hwpoison page.  While this looks like something
that shouldn't happen in the first place because onlining hwpages and
returning them to the page allocator makes only little sense it shows a
real problem.

hwpoison pages do not get freed usually so we do not uncharge them (at
least not since commit 0a31bc97c80c ("mm: memcontrol: rewrite uncharge
API")).  Each charge pins memcg (since e8ea14cc6ead ("mm: memcontrol:
take a css reference for each charged page")) as well and so the
mem_cgroup and the associated state will never go away.  Fix this leak
by forcibly uncharging a LRU hwpoisoned page in delete_from_lru_cache().
We also have to tweak uncharge_list because it cannot rely on zero ref
count for these pages.

[akpm@linux-foundation.org: coding-style fixes]
Fixes: 0a31bc97c80c ("mm: memcontrol: rewrite uncharge API")
Link: http://lkml.kernel.org/r/20170502185507.GB19165@dhcp22.suse.cz
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Tested-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Reviewed-by: Balbir Singh <bsingharora@gmail.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/mmap.c: do not blow on PROT_NONE MAP_FIXED holes in the stack

commit 561b5e0709e4a248c67d024d4d94b6e31e3edf2f upstream.

Commit 1be7107fbe18 ("mm: larger stack guard gap, between vmas") has
introduced a regression in some rust and Java environments which are
trying to implement their own stack guard page.  They are punching a new
MAP_FIXED mapping inside the existing stack Vma.

This will confuse expand_{downwards,upwards} into thinking that the
stack expansion would in fact get us too close to an existing non-stack
vma which is a correct behavior wrt safety.  It is a real regression on
the other hand.

Let's work around the problem by considering PROT_NONE mapping as a part
of the stack.  This is a gros hack but overflowing to such a mapping
would trap anyway an we only can hope that usespace knows what it is
doing and handle it propely.

Fixes: 1be7107fbe18 ("mm: larger stack guard gap, between vmas")
Link: http://lkml.kernel.org/r/20170705182849.GA18027@dhcp22.suse.cz
Signed-off-by: Michal Hocko <mhocko@suse.com>
Debugged-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: base: cacheinfo: fix boot error message when acpi is enabled

commit 55877ef45fbd7f975d078426866b7d1a2435dcc3 upstream.

ARM64 enables both CONFIG_OF and CONFIG_ACPI and the firmware can pass
both ACPI tables and the device tree. Based on the kernel parameter, one
of the two will be chosen. If acpi is enabled, then device tree is not
unflattened.

Currently ARM64 platforms report:
"
Failed to find cpu0 device node
Unable to detect cache hierarchy from DT for CPU 0
"
which is incorrect when booting with ACPI. Also latest ACPI v6.1 has no
support for cache properties/hierarchy.

This patch adds check for unflattened device tree and also returns as
"not supported" if ACPI is runtime enabled.

It also removes the reference to DT from the error message as the cache
hierarchy can be detected from the firmware(OF/DT/ACPI)

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: base: cacheinfo: fix x86 with CONFIG_OF enabled

commit fac51482577d5e05bbb0efa8d602a3c2111098bf upstream.

With CONFIG_OF enabled on x86, we get the following error on boot:
"
Failed to find cpu0 device node
  Unable to detect cache hierarchy from DT for CPU 0
"
and the cacheinfo fails to get populated in the corresponding sysfs
entries. This is because cache_setup_of_node looks for of_node for
setting up the shared cpu_map without checking that it's already
populated in the architecture specific callback.

In order to indicate that the shared cpu_map is already populated, this
patch introduces a boolean `cpu_map_populated` in struct cpu_cacheinfo
that can be used by the generic code to skip cache_shared_cpu_map_setup.

This patch also sets that boolean for x86.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Prevent timer value 0 for MWAITX

commit 88d879d29f9cc0de2d930b584285638cdada6625 upstream.

Newer hardware has uncovered a bug in the software implementation of
using MWAITX for the delay function. A value of 0 for the timer is meant
to indicate that a timeout will not be used to exit MWAITX. On newer
hardware this can result in MWAITX never returning, resulting in NMI
soft lockup messages being printed. On older hardware, some of the other
conditions under which MWAITX can exit masked this issue. The AMD APM
does not currently document this and will be updated.

Please refer to http://marc.info/?l=kvm&m=148950623231140 for
information regarding NMI soft lockup messages on an AMD Ryzen 1800X.
This has been root-caused as a 0 passed to MWAITX causing it to wait
indefinitely.

This change has the added benefit of avoiding the unnecessary setup of
MONITORX/MWAITX when the delay value is zero.

Signed-off-by: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Link: http://lkml.kernel.org/r/1493156643-29366-1-git-send-email-Janakarajan.Natarajan@amd.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm/arm64: Check pagesize when allocating a hugepage at Stage 2

commit c507babf10ead4d5c8cca704539b170752a8ac84 upstream.

KVM only supports PMD hugepages at stage 2 but doesn't actually check
that the provided hugepage memory pagesize is PMD_SIZE before populating
stage 2 entries.

In cases where the backing hugepage size is smaller than PMD_SIZE (such
as when using contiguous hugepages), KVM can end up creating stage 2
mappings that extend beyond the supplied memory.

Fix this by checking for the pagesize of userspace vma before creating
PMD hugepage at stage 2.

Fixes: 66b3923a1a0f77a ("arm64: hugetlb: add support for PTE contiguous bit")
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: af_can: canfd_rcv(): replace WARN_ONCE by pr_warn_once

commit d4689846881d160a4d12a514e991a740bcb5d65a upstream.

If an invalid CANFD frame is received, from a driver or from a tun
interface, a Kernel warning is generated.

This patch replaces the WARN_ONCE by a simple pr_warn_once, so that a
kernel, bootet with panic_on_warn, does not panic. A printk seems to be
more appropriate here.

Reported-by: syzbot+e3b775f40babeff6e68b@syzkaller.appspotmail.com
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: af_can: can_rcv(): replace WARN_ONCE by pr_warn_once

commit 8cb68751c115d176ec851ca56ecfbb411568c9e8 upstream.

If an invalid CAN frame is received, from a driver or from a tun
interface, a Kernel warning is generated.

This patch replaces the WARN_ONCE by a simple pr_warn_once, so that a
kernel, bootet with panic_on_warn, does not panic. A printk seems to be
more appropriate here.

Reported-by: syzbot+4386709c0c1284dca827@syzkaller.appspotmail.com
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbip: Fix potential format overflow in userspace tools

commit e5dfa3f902b9a642ae8c6997d57d7c41e384a90b upstream.

The usbip userspace tools call sprintf()/snprintf() and don't check for
the return value which can lead the paths to overflow, truncating the
final file in the path.

More urgently, GCC 7 now warns that these aren't checked with
-Wformat-overflow, and with -Werror enabled in configure.ac, that makes
these tools unbuildable.

This patch fixes these problems by replacing sprintf() with snprintf() in
one place and adding checks for the return value of snprintf().

Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Jonathan Dieter <jdieter@lesbg.com>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbip: Fix implicit fallthrough warning

commit cfd6ed4537a9e938fa76facecd4b9cd65b6d1563 upstream.

GCC 7 now warns when switch statements fall through implicitly, and with
-Werror enabled in configure.ac, that makes these tools unbuildable.

We fix this by notifying the compiler that this particular case statement
is meant to fall through.

Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Jonathan Dieter <jdieter@lesbg.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbip: prevent vhci_hcd driver from leaking a socket pointer address

commit 2f2d0088eb93db5c649d2a5e34a3800a8a935fc5 upstream.

When a client has a USB device attached over IP, the vhci_hcd driver is
locally leaking a socket pointer address via the

/sys/devices/platform/vhci_hcd/status file (world-readable) and in debug
output when "usbip --debug port" is run.

Fix it to not leak. The socket pointer address is not used at the moment
and it was made visible as a convenient way to find IP address from socket
pointer address by looking up /proc/net/{tcp,tcp6}.

As this opens a security hole, the fix replaces socket pointer address with
sockfd.

Reported-by: Secunia Research <vuln@secunia.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

orangefs: initialize op on loop restart in orangefs_devreq_read

commit a0ec1ded22e6a6bc41981fae22406835b006a66e upstream.

In orangefs_devreq_read, there is a loop which picks an op off the list
of pending ops.  If the loop fails to find an op, there is nothing to
read, and it returns EAGAIN.  If the op has been given up on, the loop
is restarted via a goto.  The bug is that the variable which the found
op is written to is not reinitialized, so if there are no more eligible
ops on the list, the code runs again on the already handled op.

This is triggered by interrupting a process while the op is being copied
to the client-core.  It's a fairly small window, but it's there.

Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

orangefs: use list_for_each_entry_safe in purge_waiting_ops

commit 0afc0decf247f65b7aba666a76a0a68adf4bc435 upstream.

set_op_state_purged can delete the op.

Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/asm/32: Make sync_core() handle missing CPUID on all 32-bit kernels

commit 1c52d859cb2d417e7216d3e56bb7fea88444cec9 upstream.

We support various non-Intel CPUs that don't have the CPUID
instruction, so the M486 test was wrong.  For now, fix it with a big
hammer: handle missing CPUID on all 32-bit CPUs.

Reported-by: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Matthew Whitehead <tedheadster@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: xen-devel <Xen-devel@lists.xen.org>
Link: http://lkml.kernel.org/r/685bd083a7c036f7769510b6846315b17d6ba71f.1481307769.git.luto@kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "Zhang, Ning A" <ning.a.zhang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.9.78

MIPS: AR7: ensure the port type's FCR value is used

commit 0a5191efe06b5103909206e4fbcff81d30283f8e upstream.

Since commit aef9a7bd9b67 ("serial/uart/8250: Add tunable RX interrupt
trigger I/F of FIFO buffers"), the port's default FCR value isn't used
in serial8250_do_set_termios anymore, but copied over once in
serial8250_config_port and then modified as needed.

Unfortunately, serial8250_config_port will never be called if the port
is shared between kernel and userspace, and the port's flag doesn't have
UPF_BOOT_AUTOCONF, which would trigger a serial8250_config_port as well.

This causes garbled output from userspace:

[    5.220000] random: procd urandom read with 49 bits of entropy available
ers
   [kee

Fix this by forcing it to be configured on boot, resulting in the
expected output:

[    5.250000] random: procd urandom read with 50 bits of entropy available
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level

Fixes: aef9a7bd9b67 ("serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Nicolas Schichan <nschichan@freebox.fr>
Cc: linux-mips@linux-mips.org
Cc: linux-serial@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17544/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/retpoline: Optimize inline assembler for vmexit_fill_RSB

commit 3f7d875566d8e79c5e0b2c9a413e91b2c29e0854 upstream.

The generated assembler for the C fill RSB inline asm operations has
several issues:

- The C code sets up the loop register, which is then immediately
  overwritten in __FILL_RETURN_BUFFER with the same value again.

- The C code also passes in the iteration count in another register, which
  is not used at all.

Remove these two unnecessary operations. Just rely on the single constant
passed to the macro for the iterations.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: dave.hansen@intel.com
Cc: gregkh@linuxfoundation.org
Cc: torvalds@linux-foundation.org
Cc: arjan@linux.intel.com
Link: https://lkml.kernel.org/r/20180117225328.15414-1-andi@firstfloor.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/pti: Document fix wrong index

commit 98f0fceec7f84d80bc053e49e596088573086421 upstream.

In section <2. Runtime Cost>, fix wrong index.

Signed-off-by: zhenwei.pi <zhenwei.pi@youruncloud.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: dave.hansen@linux.intel.com
Link: https://lkml.kernel.org/r/1516237492-27739-1-git-send-email-zhenwei.pi@youruncloud.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kprobes/x86: Disable optimizing on the function jumps to indirect thunk

commit c86a32c09f8ced67971a2310e3b0dda4d1749007 upstream.

Since indirect jump instructions will be replaced by jump
to __x86_indirect_thunk_*, those jmp instruction must be
treated as an indirect jump. Since optprobe prohibits to
optimize probes in the function which uses an indirect jump,
it also needs to find out the function which jump to
__x86_indirect_thunk_* and disable optimization.

Add a check that the jump target address is between the
__indirect_thunk_start/end when optimizing kprobe.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Link: https://lkml.kernel.org/r/151629212062.10241.6991266100233002273.stgit@devbox
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kprobes/x86: Blacklist indirect thunk functions for kprobes

commit c1804a236894ecc942da7dc6c5abe209e56cba93 upstream.

Mark __x86_indirect_thunk_* functions as blacklist for kprobes
because those functions can be called from anywhere in the kernel
including blacklist functions of kprobes.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Link: https://lkml.kernel.org/r/151629209111.10241.5444852823378068683.stgit@devbox
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

retpoline: Introduce start/end markers of indirect thunk

commit 736e80a4213e9bbce40a7c050337047128b472ac upstream.

Introduce start/end markers of __x86_indirect_thunk_* functions.
To make it easy, consolidate .text.__x86.indirect_thunk.* sections
to one .text.__x86.indirect_thunk section and put it in the
end of kernel text section and adds __indirect_thunk_start/end
so that other subsystem (e.g. kprobes) can identify it.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Link: https://lkml.kernel.org/r/151629206178.10241.6828804696410044771.stgit@devbox
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mce: Make machine check speculation protected

commit 6f41c34d69eb005e7848716bbcafc979b35037d5 upstream.

The machine check idtentry uses an indirect branch directly from the low
level code. This evades the speculation protection.

Replace it by a direct call into C code and issue the indirect call there
so the compiler can apply the proper speculation protection.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by:Borislav Petkov <bp@alien8.de>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Niced-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801181626290.1847@nanos
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbip: fix warning in vhci_hcd_probe/lockdep_init_map

commit 918b8ac55b6c809b70aa05c279087109584e393e upstream.

vhci_hcd calls sysfs_create_group() with dynamically allocated sysfs
attributes triggering the lock-class key not persistent warning. Call
sysfs_attr_init() for dynamically allocated sysfs attributes to fix it.

vhci_hcd vhci_hcd: USB/IP Virtual Host Controller
vhci_hcd vhci_hcd: new USB bus registered, assigned bus number 2
BUG: key ffff88006a7e8d18 not in .data!
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:3131
lockdep_init_map+0x60c/0x770
DEBUG_LOCKS_WARN_ON(1)[    1.567044] Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.9.0-rc7+ #58
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
 ffff88006bce6eb8 ffffffff81f96c8a ffffffff00000a02 1ffff1000d79cd6a
 ffffed000d79cd62 000000046bce6ed8 0000000041b58ab3 ffffffff8598af40
 ffffffff81f969f8 0000000000000000 0000000041b58ab3 0000000000000200
Call Trace:
 [<     inline     >] __dump_stack lib/dump_stack.c:15
 [<ffffffff81f96c8a>] dump_stack+0x292/0x398 lib/dump_stack.c:51
 [<ffffffff812b808f>] __warn+0x19f/0x1e0 kernel/panic.c:550
 [<ffffffff812b8195>] warn_slowpath_fmt+0xc5/0x110 kernel/panic.c:565
 [<ffffffff813f3efc>] lockdep_init_map+0x60c/0x770 kernel/locking/lockdep.c:3131
 [<ffffffff819e43d4>] __kernfs_create_file+0x114/0x2a0 fs/kernfs/file.c:954
 [<ffffffff819e68f5>] sysfs_add_file_mode_ns+0x225/0x520 fs/sysfs/file.c:305
 [<     inline     >] create_files fs/sysfs/group.c:64
 [<ffffffff819e8a89>] internal_create_group+0x239/0x8f0 fs/sysfs/group.c:134
 [<ffffffff819e915f>] sysfs_create_group+0x1f/0x30 fs/sysfs/group.c:156
 [<ffffffff8323de24>] vhci_start+0x5b4/0x7a0 drivers/usb/usbip/vhci_hcd.c:978
 [<ffffffff82c907ca>] usb_add_hcd+0x8da/0x1c60 drivers/usb/core/hcd.c:2867
 [<ffffffff8323bc57>] vhci_hcd_probe+0x97/0x130
drivers/usb/usbip/vhci_hcd.c:1103
 ---
 ---
---[ end trace c33c7b202cf3aac8 ]---

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/cpu, x86/pti: Do not enable PTI on AMD processors

commit 694d99d40972f12e59a3696effee8a376b79d7c8 upstream.

AMD processors are not subject to the types of attacks that the kernel
page table isolation feature protects against.  The AMD microarchitecture
does not allow memory references, including speculative references, that
access higher privileged data when running in a lesser privileged mode
when that access would result in a page fault.

Disable page table isolation by default on AMD processors by not setting
the X86_BUG_CPU_INSECURE feature, which controls whether X86_FEATURE_PTI
is set.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20171227054354.20369.94587.stgit@tlendack-t1.amdoffice.net
Cc: Nick Lowe <nick.lowe@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: KVM: Fix SMCCC handling of unimplemented SMC/HVC calls

commit acfb3b883f6d6a4b5d27ad7fdded11f6a09ae6dd upstream.

KVM doesn't follow the SMCCC when it comes to unimplemented calls,
and inject an UNDEF instead of returning an error. Since firmware
calls are now used for security mitigation, they are becoming more
common, and the undef is counter productive.

Instead, let's follow the SMCCC which states that -1 must be returned
to the caller when getting an unknown function number.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm thin metadata: THIN_MAX_CONCURRENT_LOCKS should be 6

commit 490ae017f54e55bde382d45ea24bddfb6d1a0aaf upstream.

For btree removal, there is a corner case that a single thread
could takes 6 locks which is more than THIN_MAX_CONCURRENT_LOCKS(5)
and leads to deadlock.

A btree removal might eventually call
rebalance_children()->rebalance3() to rebalance entries of three
neighbor child nodes when shadow_spine has already acquired two
write locks. In rebalance3(), it tries to shadow and acquire the
write locks of all three child nodes. However, shadowing a child
node requires acquiring a read lock of the original child node and
a write lock of the new block. Although the read lock will be
released after block shadowing, shadowing the third child node
in rebalance3() could still take the sixth lock.
(2 write locks for shadow_spine +
 2 write locks for the first two child nodes's shadow +
 1 write lock for the last child node's shadow +
 1 read lock for the last child node)

Signed-off-by: Dennis Yang <dennisyang@qnap.com>
Acked-by: Joe Thornber <thornber@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm btree: fix serious bug in btree_split_beneath()

commit bc68d0a43560e950850fc69b58f0f8254b28f6d6 upstream.

When inserting a new key/value pair into a btree we walk down the spine of
btree nodes performing the following 2 operations:

  i) space for a new entry
  ii) adjusting the first key entry if the new key is lower than any in the node.

If the _root_ node is full, the function btree_split_beneath() allocates 2 new
nodes, and redistibutes the root nodes entries between them.  The root node is
left with 2 entries corresponding to the 2 new nodes.

btree_split_beneath() then adjusts the spine to point to one of the two new
children.  This means the first key is never adjusted if the new key was lower,
ie. operation (ii) gets missed out.  This can result in the new key being
'lost' for a period; until another low valued key is inserted that will uncover
it.

This is a serious bug, and quite hard to make trigger in normal use.  A
reproducing test case ("thin create devices-in-reverse-order") is
available as part of the thin-provision-tools project:
  https://github.com/jthornber/thin-provisioning-tools/blob/master/functional-tests/device-mapper/dm-tests.scm#L593

Fix the issue by changing btree_split_beneath() so it no longer adjusts
the spine.  Instead it unlocks both the new nodes, and lets the main
loop in btree_insert_raw() relock the appropriate one and make any
neccessary adjustments.

Reported-by: Monty Pavel <monty_pavel@sina.com>
Signed-off-by: Joe Thornber <thornber@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

workqueue: avoid hard lockups in show_workqueue_state()

commit 62635ea8c18f0f62df4cc58379e4f1d33afd5801 upstream.

show_workqueue_state() can print out a lot of messages while being in
atomic context, e.g. sysrq-t -> show_workqueue_state(). If the console
device is slow it may end up triggering NMI hard lockup watchdog.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libata: apply MAX_SEC_1024 to all LITEON EP1 series devices

commit db5ff909798ef0099004ad50a0ff5fde92426fd1 upstream.

LITEON EP1 has the same timeout issues as CX1 series devices.

Revert max_sectors to the value of 1024.

Fixes: e0edc8c54646 ("libata: apply MAX_SEC_1024 to all CX1-JB*-HP devices")
Signed-off-by: Xinyu Lin <xinyu0123@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

proc: fix coredump vs read /proc/*/stat race

commit 8bb2ee192e482c5d500df9f2b1b26a560bd3026f upstream.

do_task_stat() accesses IP and SP of a task without bumping reference
count of a stack (which became an entity with independent lifetime at
some point).

Steps to reproduce:

    #include <stdio.h>
    #include <sys/types.h>
    #include <sys/stat.h>
    #include <fcntl.h>
    #include <sys/time.h>
    #include <sys/resource.h>
    #include <unistd.h>
    #include <sys/wait.h>

    int main(void)
    {
     setrlimit(RLIMIT_CORE, &(struct rlimit){});

     while (1) {
     char buf[64];
     char buf2[4096];
     pid_t pid;
     int fd;

     pid = fork();
     if (pid == 0) {
     *(volatile int *)0 = 0;
     }

     snprintf(buf, sizeof(buf), "/proc/%u/stat", pid);
     fd = open(buf, O_RDONLY);
     read(fd, buf2, sizeof(buf2));
     close(fd);

     waitpid(pid, NULL, 0);
     }
     return 0;
    }

    BUG: unable to handle kernel paging request at 0000000000003fd8
    IP: do_task_stat+0x8b4/0xaf0
    PGD 800000003d73e067 P4D 800000003d73e067 PUD 3d558067 PMD 0
    Oops: 0000 [#1] PREEMPT SMP PTI
    CPU: 0 PID: 1417 Comm: a.out Not tainted 4.15.0-rc8-dirty #2
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1.fc27 04/01/2014
    RIP: 0010:do_task_stat+0x8b4/0xaf0
    Call Trace:
     proc_single_show+0x43/0x70
     seq_read+0xe6/0x3b0
     __vfs_read+0x1e/0x120
     vfs_read+0x84/0x110
     SyS_read+0x3d/0xa0
     entry_SYSCALL_64_fastpath+0x13/0x6c
    RIP: 0033:0x7f4d7928cba0
    RSP: 002b:00007ffddb245158 EFLAGS: 00000246
    Code: 03 b7 a0 01 00 00 4c 8b 4c 24 70 4c 8b 44 24 78 4c 89 74 24 18 e9 91 f9 ff ff f6 45 4d 02 0f 84 fd f7 ff ff 48 8b 45 40 48 89 ef <48> 8b 80 d8 3f 00 00 48 89 44 24 20 e8 9b 97 eb ff 48 89 44 24
    RIP: do_task_stat+0x8b4/0xaf0 RSP: ffffc90000607cc8
    CR2: 0000000000003fd8

John Ogness said: for my tests I added an else case to verify that the
race is hit and correctly mitigated.

Link: http://lkml.kernel.org/r/20180116175054.GA11513@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reported-by: "Kohli, Gaurav" <gkohli@codeaurora.org>
Tested-by: John Ogness <john.ogness@linutronix.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scripts/gdb/linux/tasks.py: fix get_thread_info

commit 883d50f56d263f70fd73c0d96b09eb36c34e9305 upstream.

Since kernel 4.9, the thread_info has been moved into task_struct, no
longer locates at the bottom of kernel stack.

See commits c65eacbe290b ("sched/core: Allow putting thread_info into
task_struct") and 15f4eae70d36 ("x86: Move thread_info into
task_struct").

Before fix:
  (gdb) set $current = $lx_current()
  (gdb) p $lx_thread_info($current)
  $1 = {flags = 1470918301}
  (gdb) p $current.thread_info
  $2 = {flags = 2147483648}

After fix:
  (gdb) p $lx_thread_info($current)
  $1 = {flags = 2147483648}
  (gdb) p $current.thread_info
  $2 = {flags = 2147483648}

Link: http://lkml.kernel.org/r/20180118210159.17223-1-imxikangjie@gmail.com
Fixes: 15f4eae70d36 ("x86: Move thread_info into task_struct")
Signed-off-by: Xi Kangjie <imxikangjie@gmail.com>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Kieran Bingham <kbingham@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: peak: fix potential bug in packet fragmentation

commit d8a243af1a68395e07ac85384a2740d4134c67f4 upstream.

In some rare conditions when running one PEAK USB-FD interface over
a non high-speed USB controller, one useless USB fragment might be sent.
This patch fixes the way a USB command is fragmented when its length is
greater than 64 bytes and when the underlying USB controller is not a
high-speed one.

Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: kirkwood: fix pin-muxing of MPP7 on OpenBlocks A7

commit 56aeb07c914a616ab84357d34f8414a69b140cdf upstream.

MPP7 is currently muxed as "gpio", but this function doesn't exist for
MPP7, only "gpo" is available. This causes the following error:

kirkwood-pinctrl f1010000.pin-controller: unsupported function gpio on pin mpp7
pinctrl core: failed to register map default (6): invalid type given
kirkwood-pinctrl f1010000.pin-controller: error claiming hogs: -22
kirkwood-pinctrl f1010000.pin-controller: could not claim hogs: -22
kirkwood-pinctrl f1010000.pin-controller: unable to register pinctrl driver
kirkwood-pinctrl: probe of f1010000.pin-controller failed with error -22

So the pinctrl driver is not probed, all device drivers (including the
UART driver) do a -EPROBE_DEFER, and therefore the system doesn't
really boot (well, it boots, but with no UART, and no devices that
require pin-muxing).

Back when the Device Tree file for this board was introduced, the
definition was already wrong. The pinctrl driver also always described
as "gpo" this function for MPP7. However, between Linux 4.10 and 4.11,
a hog pin failing to be muxed was turned from a simple warning to a
hard error that caused the entire pinctrl driver probe to bail
out. This is probably the result of commit 6118714275f0a ("pinctrl:
core: Fix pinctrl_register_and_init() with pinctrl_enable()").

This commit fixes the Device Tree to use the proper "gpo" function for
MPP7, which fixes the boot of OpenBlocks A7, which was broken since
Linux 4.11.

Fixes: f24b56cbcd9d ("ARM: kirkwood: add support for OpenBlocks A7 platform")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: sunxi_defconfig: Enable CMA

commit c13e7f313da33d1488355440f1a10feb1897480a upstream.

The DRM driver most notably, but also out of tree drivers (for now) like
the VPU or GPU drivers, are quite big consumers of large, contiguous memory
buffers. However, the sunxi_defconfig doesn't enable CMA in order to
mitigate that, which makes them almost unusable.

Enable it to make sure it somewhat works.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phy: work around 'phys' references to usb-nop-xceiv devices

commit b7563e2796f8b23c98afcfea7363194227fa089d upstream.

Stefan Wahren reports a problem with a warning fix that was merged
for v4.15: we had lots of device nodes with a 'phys' property pointing
to a device node that is not compliant with the binding documented in
Documentation/devicetree/bindings/phy/phy-bindings.txt

This generally works because USB HCD drivers that support both the generic
phy subsystem and the older usb-phy subsystem ignore most errors from
phy_get() and related calls and then use the usb-phy driver instead.

However, it turns out that making the usb-nop-xceiv device compatible with
the generic-phy binding changes the phy_get() return code from -EINVAL to
-EPROBE_DEFER, and the dwc2 usb controller driver for bcm2835 now returns
-EPROBE_DEFER from its probe function rather than ignoring the failure,
breaking all USB support on raspberry-pi when CONFIG_GENERIC_PHY is
enabled. The same code is used in the dwc3 driver and the usb_add_hcd()
function, so a reasonable assumption would be that many other platforms
are affected as well.

I have reviewed all the related patches and concluded that "usb-nop-xceiv"
is the only USB phy that is affected by the change, and since it is by far
the most commonly referenced phy, all the other USB phy drivers appear
to be used in ways that are are either safe in DT (they don't use the
'phys' property), or in the driver (they already ignore -EPROBE_DEFER
from generic-phy when usb-phy is available).

To work around the problem, this adds a special case to _of_phy_get()
so we ignore any PHY node that is compatible with "usb-nop-xceiv",
as we know that this can never load no matter how much we defer. In the
future, we might implement a generic-phy driver for "usb-nop-xceiv"
and then remove this workaround.

Since we generally want older kernels to also want to work with the
fixed devicetree files, it would be good to backport the patch into
stable kernels as well (3.13+ are possibly affected), even though they
don't contain any of the patches that may have caused regressions.

Fixes: 014d6da6cb25 ARM: dts: bcm283x: Fix DTC warnings about missing phy-cells
Fixes: c5bbf358b790 arm: dts: nspire: Add missing #phy-cells to usb-nop-xceiv
Fixes: 44e5dced2ef6 arm: dts: marvell: Add missing #phy-cells to usb-nop-xceiv
Fixes: f568f6f554b8 ARM: dts: omap: Add missing #phy-cells to usb-nop-xceiv
Fixes: d745d5f277bf ARM: dts: imx51-zii-rdu1: Add missing #phy-cells to usb-nop-xceiv
Fixes: 915fbe59cbf2 ARM: dts: imx: Add missing #phy-cells to usb-nop-xceiv
Link: https://marc.info/?l=linux-usb&m=151518314314753&w=2
Link: https://patchwork.kernel.org/patch/10158145/
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Eric Anholt <eric@anholt.net>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Fix converting enum's from the map in trace_event_eval_update()

commit 1ebe1eaf2f02784921759992ae1fde1a9bec8fd0 upstream.

Since enums do not get converted by the TRACE_EVENT macro into their values,
the event format displaces the enum name and not the value. This breaks
tools like perf and trace-cmd that need to interpret the raw binary data. To
solve this, an enum map was created to convert these enums into their actual
numbers on boot up. This is done by TRACE_EVENTS() adding a
TRACE_DEFINE_ENUM() macro.

Some enums were not being converted. This was caused by an optization that
had a bug in it.

All calls get checked against this enum map to see if it should be converted
or not, and it compares the call's system to the system that the enum map
was created under. If they match, then they call is processed.

To cut down on the number of iterations needed to find the maps with a
matching system, since calls and maps are grouped by system, when a match is
made, the index into the map array is saved, so that the next call, if it
belongs to the same system as the previous call, could start right at that
array index and not have to scan all the previous arrays.

The problem was, the saved index was used as the variable to know if this is
a call in a new system or not. If the index was zero, it was assumed that
the call is in a new system and would keep incrementing the saved index
until it found a matching system. The issue arises when the first matching
system was at index zero. The next map, if it belonged to the same system,
would then think it was the first match and increment the index to one. If
the next call belong to the same system, it would begin its search of the
maps off by one, and miss the first enum that should be converted. This left
a single enum not converted properly.

Also add a comment to describe exactly what that index was for. It took me a
bit too long to figure out what I was thinking when debugging this issue.

Link: http://lkml.kernel.org/r/717BE572-2070-4C1E-9902-9F2E0FEDA4F8@oracle.com
Fixes: 0c564a538aa93 ("tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values")
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Teste-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: twl4030-vibra - fix sibling-node lookup

commit 5b189201993ab03001a398de731045bfea90c689 upstream.

A helper purported to look up a child node based on its name was using
the wrong of-helper and ended up prematurely freeing the parent of-node
while searching the whole device tree depth-first starting at the parent
node.

Fixes: 64b9e4d803b1 ("input: twl4030-vibra: Support for DT booted kernel")
Fixes: e661d0a04462 ("Input: twl4030-vibra - fix ERROR: Bad of_node_put() warning")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: twl6040-vibra - fix child-node lookup

commit dcaf12a8b0bbdbfcfa2be8dff2c4948d9844b4ad upstream.

Fix child-node lookup during probe, which ended up searching the whole
device tree depth-first starting at parent rather than just matching on
its children.

Later sanity checks on node properties (which would likely be missing)
should prevent this from causing much trouble however, especially as the
original premature free of the parent node has already been fixed
separately (but that "fix" was apparently never backported to stable).

Fixes: e7ec014a47e4 ("Input: twl6040-vibra - update for device tree support")
Fixes: c52c545ead97 ("Input: twl6040-vibra - fix DT node memory management")
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com> (on Pyra OMAP5 hardware)
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: 88pm860x-ts - fix child-node lookup

commit 906bf7daa0618d0ef39f4872ca42218c29a3631f upstream.

Fix child node-lookup during probe, which ended up searching the whole
device tree depth-first starting at parent rather than just matching on
its children.

To make things worse, the parent node was prematurely freed, while the
child node was leaked.

Fixes: 2e57d56747e6 ("mfd: 88pm860x: Device tree support")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: ALPS - fix multi-touch decoding on SS4 plus touchpads

commit 4d94e776bd29670f01befa27e12df784fa05fa2e upstream.

The fix for handling two-finger scroll (i4a646580f793 - "Input: ALPS -
fix two-finger scroll breakage in right side on ALPS touchpad")
introduced a minor "typo" that broke decoding of multi-touch events are
decoded on some ALPS touchpads.  For example, tapping with three-fingers
can no longer be used to emulate middle-mouse-button (the kernel doesn't
recognize this as the proper event, and doesn't report it correctly to
userspace).  This affects touchpads that use SS4 "plus" protocol
variant, like those found on Dell E7270 & E7470 laptops (tested on
E7270).

First, probably the code in alps_decode_ss4_v2() for case
SS4_PACKET_ID_MULTI used inconsistent indices to "f->mt[]". You can see
0 & 1 are used for the "if" part but 2 & 3 are used for the "else" part.

Second, in the previous patch, new macros were introduced to decode X
coordinates specific to the SS4 "plus" variant, but the macro to
define the maximum X value wasn't changed accordingly. The macros to
decode X values for "plus" variant are effectively shifted right by 1
bit, but the max wasn't shifted too. This causes the driver to
incorrectly handle "no data" cases, which also interfered with how
multi-touch was handled.

Fixes: 4a646580f793 ("Input: ALPS - fix two-finger scroll breakage...")
Signed-off-by: Nir Perry <nirperry@gmail.com>
Reviewed-by: Masaki Ota <masaki.ota@jp.alps.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf tools: Fix build with ARCH=x86_64

commit 7a759cd8e8272ee18922838ee711219c7c796a31 upstream.

With commit: 0a943cb10ce78 (tools build: Add HOSTARCH Makefile variable)
when building for ARCH=x86_64, ARCH=x86_64 is passed to perf instead of
ARCH=x86, so the perf build process searchs header files from
tools/arch/x86_64/include, which doesn't exist.

The following build failure is seen:

  In file included from util/event.c:2:0:
    tools/include/uapi/linux/mman.h:4:27: fatal error: uapi/asm/mman.h: No such file or directory
    compilation terminated.

Fix this issue by using SRCARCH instead of ARCH in perf, just like the
main kernel Makefile and tools/objtool's.

Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Eugeniu Rosca <erosca@de.adit-jv.com>
Cc: Jan Stancek <jstancek@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Rui Teng <rui.teng@linux.vnet.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 0a943cb10ce7 ("tools build: Add HOSTARCH Makefile variable")
Link: http://lkml.kernel.org/r/1491793357-14977-2-git-send-email-jiada_wang@mentor.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Tuomas Tynkkynen <tuomas@tuxera.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/apic/vector: Fix off by one in error path

commit 45d55e7bac4028af93f5fa324e69958a0b868e96 upstream.

Keith reported the following warning:

WARNING: CPU: 28 PID: 1420 at kernel/irq/matrix.c:222 irq_matrix_remove_managed+0x10f/0x120
  x86_vector_free_irqs+0xa1/0x180
  x86_vector_alloc_irqs+0x1e4/0x3a0
  msi_domain_alloc+0x62/0x130

The reason for this is that if the vector allocation fails the error
handling code tries to free the failed vector as well, which causes the
above imbalance warning to trigger.

Adjust the error path to handle this correctly.

Fixes: b5dc8e6c21e7 ("x86/irq: Use hierarchical irqdomain to manage CPU interrupt vectors")
Reported-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Keith Busch <keith.busch@intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801161217300.1823@nanos
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pipe: avoid round_pipe_size() nr_pages overflow on 32-bit

commit d3f14c485867cfb2e0c48aa88c41d0ef4bf5209c upstream.

round_pipe_size() contains a right-bit-shift expression which may
overflow, which would cause undefined results in a subsequent
roundup_pow_of_two() call.

  static inline unsigned int round_pipe_size(unsigned int size)
  {
          unsigned long nr_pages;

          nr_pages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT;
          return roundup_pow_of_two(nr_pages) << PAGE_SHIFT;
  }

PAGE_SIZE is defined as (1UL << PAGE_SHIFT), so:
  - 4 bytes wide on 32-bit (0 to 0xffffffff)
  - 8 bytes wide on 64-bit (0 to 0xffffffffffffffff)

That means that 32-bit round_pipe_size(), nr_pages may overflow to 0:

  size=0x00000000    nr_pages=0x0
  size=0x00000001    nr_pages=0x1
  size=0xfffff000    nr_pages=0xfffff
  size=0xfffff001    nr_pages=0x0         << !
  size=0xffffffff    nr_pages=0x0         << !

This is bad because roundup_pow_of_two(n) is undefined when n == 0!

64-bit is not a problem as the unsigned int size is 4 bytes wide
(similar to 32-bit) and the larger, 8 byte wide unsigned long, is
sufficient to handle the largest value of the bit shift expression:

  size=0xffffffff    nr_pages=100000

Modify round_pipe_size() to return 0 if n == 0 and updates its callers to
handle accordingly.

Link: http://lkml.kernel.org/r/1507658689-11669-3-git-send-email-joe.lawrence@redhat.com
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dong Jinguang <dongjinguang@huawei.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/tsc: Fix erroneous TSC rate on Skylake Xeon

commit b511203093489eb1829cb4de86e8214752205ac6 upstream.

The INTEL_FAM6_SKYLAKE_X hardcoded crystal_khz value of 25MHZ is
problematic:

 - SKX workstations (with same model # as server variants) use a 24 MHz
   crystal.  This results in a -4.0% time drift rate on SKX workstations.

 - SKX servers subject the crystal to an EMI reduction circuit that reduces its
   actual frequency by (approximately) -0.25%.  This results in -1 second per
   10 minute time drift as compared to network time.

This issue can also trigger a timer and power problem, on configurations
that use the LAPIC timer (versus the TSC deadline timer).  Clock ticks
scheduled with the LAPIC timer arrive a few usec before the time they are
expected (according to the slow TSC).  This causes Linux to poll-idle, when
it should be in an idle power saving state.  The idle and clock code do not
graciously recover from this error, sometimes resulting in significant
polling and measurable power impact.

Stop using native_calibrate_tsc() for INTEL_FAM6_SKYLAKE_X.
native_calibrate_tsc() will return 0, boot will run with tsc_khz = cpu_khz,
and the TSC refined calibration will update tsc_khz to correct for the
difference.

[ tglx: Sanitized change log ]

Fixes: 6baf3d61821f ("x86/tsc: Add additional Intel CPU models to the crystal quirk list")
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: peterz@infradead.org
Cc: Prarit Bhargava <prarit@redhat.com>
Link: https://lkml.kernel.org/r/ff6dcea166e8ff8f2f6a03c17beab2cb436aa779.1513920414.git.len.brown@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm/pkeys: Fix fill_sig_info_pkey

commit beacd6f7ed5e2915959442245b3b2480c2e37490 upstream.

SEGV_PKUERR is a signal specific si_code which happens to have the same
numeric value as several others: BUS_MCEERR_AR, ILL_ILLTRP, FPE_FLTOVF,
TRAP_HWBKPT, CLD_TRAPPED, POLL_ERR, SEGV_THREAD_ID, as such it is not safe
to just test the si_code the signal number must also be tested to prevent a
false positive in fill_sig_info_pkey.

This error was by inspection, and BUS_MCEERR_AR appears to be a real
candidate for confusion.  So pass in si_signo and check for SIG_SEGV to
verify that it is actually a SEGV_PKUERR

Fixes: 019132ff3daf ("x86/mm/pkeys: Fill in pkey field in siginfo")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lkml.kernel.org/r/20180112203135.4669-2-ebiederm@xmission.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

module: Add retpoline tag to VERMAGIC

commit 6cfb521ac0d5b97470883ff9b7facae264b7ab12 upstream.

Add a marker for retpoline to the module VERMAGIC. This catches the case
when a non RETPOLINE compiled module gets loaded into a retpoline kernel,
making it insecure.

It doesn't handle the case when retpoline has been runtime disabled.  Even
in this case the match of the retcompile status will be enforced.  This
implies that even with retpoline run time disabled all modules loaded need
to be recompiled.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: rusty@rustcorp.com.au
Cc: arjan.van.de.ven@intel.com
Cc: jeyu@kernel.org
Cc: torvalds@linux-foundation.org
Link: https://lkml.kernel.org/r/20180116205228.4890-1-andi@firstfloor.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/cpufeature: Move processor tracing out of scattered features

commit 4fdec2034b7540dda461c6ba33325dfcff345c64 upstream.

Processor tracing is already enumerated in word 9 (CPUID[7,0].EBX),
so do not duplicate it in the scattered features word.

Besides being more tidy, this will be useful for KVM when it presents
processor tracing to the guests.  KVM selects host features that are
supported by both the host kernel (depending on command line options,
CPU errata, or whatever) and KVM.  Whenever a full feature word exists,
KVM's code is written in the expectation that the CPUID bit number
matches the X86_FEATURE_* bit number, but this is not the case for
X86_FEATURE_INTEL_PT.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luwei Kang <luwei.kang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kvm@vger.kernel.org
Link: http://lkml.kernel.org/r/1516117345-34561-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

objtool: Improve error message for bad file argument

commit 385d11b152c4eb638eeb769edcb3249533bb9a00 upstream.

If a nonexistent file is supplied to objtool, it complains with a
non-helpful error:

  open: No such file or directory

Improve it to:

  objtool: Can't open 'foo': No such file or directory

Reported-by: Markus <M4rkusXXL@web.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/406a3d00a21225eee2819844048e17f68523ccf6.1516025651.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/retpoline: Add LFENCE to the retpoline/RSB filling RSB macros

commit 28d437d550e1e39f805d99f9f8ac399c778827b7 upstream.

The PAUSE instruction is currently used in the retpoline and RSB filling
macros as a speculation trap.  The use of PAUSE was originally suggested
because it showed a very, very small difference in the amount of
cycles/time used to execute the retpoline as compared to LFENCE.  On AMD,
the PAUSE instruction is not a serializing instruction, so the pause/jmp
loop will use excess power as it is speculated over waiting for return
to mispredict to the correct target.

The RSB filling macro is applicable to AMD, and, if software is unable to
verify that LFENCE is serializing on AMD (possible when running under a
hypervisor), the generic retpoline support will be used and, so, is also
applicable to AMD.  Keep the current usage of PAUSE for Intel, but add an
LFENCE instruction to the speculation trap for AMD.

The same sequence has been adopted by GCC for the GCC generated retpolines.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@alien8.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: Kees Cook <keescook@google.com>
Link: https://lkml.kernel.org/r/20180113232730.31060.36287.stgit@tlendack-t1.amdoffice.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/retpoline: Fill RSB on context switch for affected CPUs

commit c995efd5a740d9cbafbf58bde4973e8b50b4d761 upstream.

On context switch from a shallow call stack to a deeper one, as the CPU
does 'ret' up the deeper side it may encounter RSB entries (predictions for
where the 'ret' goes to) which were populated in userspace.

This is problematic if neither SMEP nor KPTI (the latter of which marks
userspace pages as NX for the kernel) are active, as malicious code in
userspace may then be executed speculatively.

Overwrite the CPU's return prediction stack with calls which are predicted
to return to an infinite loop, to "capture" speculation if this
happens. This is required both for retpoline, and also in conjunction with
IBRS for !SMEP && !KPTI.

On Skylake+ the problem is slightly different, and an *underflow* of the
RSB may cause errant branch predictions to occur. So there it's not so much
overwrite, as *filling* the RSB to attempt to prevent it getting
empty. This is only a partial solution for Skylake+ since there are many
other conditions which may result in the RSB becoming empty. The full
solution on Skylake+ is to use IBRS, which will prevent the problem even
when the RSB becomes empty. With IBRS, the RSB-stuffing will not be
required on context switch.

[ tglx: Added missing vendor check and slighty massaged comments and
   changelog ]

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: thomas.lendacky@amd.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kees Cook <keescook@google.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: https://lkml.kernel.org/r/1515779365-9032-1-git-send-email-dwmw@amazon.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/deadline: Zero out positive runtime after throttling constrained tasks

commit ae83b56a56f8d9643dedbee86b457fa1c5d42f59 upstream.

When a contrained task is throttled by dl_check_constrained_dl(),
it may carry the remaining positive runtime, as a result when
dl_task_timer() fires and calls replenish_dl_entity(), it will
not be replenished correctly due to the positive dl_se->runtime.

This patch assigns its runtime to 0 if positive after throttling.

Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luca Abeni <luca.abeni@santannapisa.it>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: df8eac8cafce ("sched/deadline: Throttle a constrained deadline task activated after the deadline)
Link: http://lkml.kernel.org/r/1494421417-27550-1-git-send-email-xlpang@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: hpsa: fix volume offline state

commit eb94588dabec82e012281608949a860f64752914 upstream.

In a previous patch a hpsa_scsi_dev_t.volume_offline update line has
been removed, so let us put it back..

Fixes: 85b29008d8 (hpsa: update check for logical volume status)
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Acked-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iser-target: Fix possible use-after-free in connection establishment error

commit cd52cb26e7ead5093635e98e07e221e4df482d34 upstream.

In case we fail to establish the connection we must drain our pre-posted
login recieve work request before continuing safely with connection
teardown.

Fixes: a060b5629ab0 ("IB/core: generic RDMA READ/WRITE API")
Reported-by: Amrani, Ram <Ram.Amrani@cavium.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

af_key: fix buffer overread in parse_exthdrs()

commit 4e765b4972af7b07adcb1feb16e7a525ce1f6b28 upstream.

If a message sent to a PF_KEY socket ended with an incomplete extension
header (fewer than 4 bytes remaining), then parse_exthdrs() read past
the end of the message, into uninitialized memory.  Fix it by returning
-EINVAL in this case.

Reproducer:

#include <linux/pfkeyv2.h>
#include <sys/socket.h>
#include <unistd.h>

int main()
{
int sock = socket(PF_KEY, SOCK_RAW, PF_KEY_V2);
char buf[17] = { 0 };
struct sadb_msg *msg = (void *)buf;

msg->sadb_msg_version = PF_KEY_V2;
msg->sadb_msg_type = SADB_DELETE;
msg->sadb_msg_len = 2;

write(sock, buf, 17);
}

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

af_key: fix buffer overread in verify_address_len()

commit 06b335cb51af018d5feeff5dd4fd53847ddb675a upstream.

If a message sent to a PF_KEY socket ended with one of the extensions
that takes a 'struct sadb_address' but there were not enough bytes
remaining in the message for the ->sa_family member of the 'struct
sockaddr' which is supposed to follow, then verify_address_len() read
past the end of the message, into uninitialized memory.  Fix it by
returning -EINVAL in this case.

This bug was found using syzkaller with KMSAN.

Reproducer:

#include <linux/pfkeyv2.h>
#include <sys/socket.h>
#include <unistd.h>

int main()
{
int sock = socket(PF_KEY, SOCK_RAW, PF_KEY_V2);
char buf[24] = { 0 };
struct sadb_msg *msg = (void *)buf;
struct sadb_address *addr = (void *)(msg + 1);

msg->sadb_msg_version = PF_KEY_V2;
msg->sadb_msg_type = SADB_DELETE;
msg->sadb_msg_len = 3;
addr->sadb_address_len = 1;
addr->sadb_address_exttype = SADB_EXT_ADDRESS_SRC;

write(sock, buf, 24);
}

Reported-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

timers: Unconditionally check deferrable base

commit ed4bbf7910b28ce3c691aef28d245585eaabda06 upstream.

When the timer base is checked for expired timers then the deferrable base
must be checked as well. This was missed when making the deferrable base
independent of base::nohz_active.

Fixes: ced6d5c11d3e ("timers: Use deferrable base independent of base::nohz_active")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: rt@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Apply the existing quirk to iMac 14,1

commit 031f335cda879450095873003abb03ae8ed3b74a upstream.

iMac 14,1 requires the same quirk as iMac 12,2, using GPIO 2 and 3 for
headphone and speaker output amps.  Add the codec SSID quirk entry
(106b:0600) accordingly.

BugLink: http://lkml.kernel.org/r/CAEw6Zyteav09VGHRfD5QwsfuWv5a43r0tFBNbfcHXoNrxVz7ew@mail.gmail.com
Reported-by: Freaky <freaky2000@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Apply headphone noise quirk for another Dell XPS 13 variant

commit e4c9fd10eb21376f44723c40ad12395089251c28 upstream.

There is another Dell XPS 13 variant (SSID 1028:082a) that requires
the existing fixup for reducing the headphone noise.
This patch adds the quirk entry for that.

BugLink: http://lkml.kernel.org/r/CAHXyb9ZCZJzVisuBARa+UORcjRERV8yokez=DP1_5O5isTz0ZA@mail.gmail.com
Reported-and-tested-by: Francisco G. <frangio.1@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: pcm: Remove yet superfluous WARN_ON()

commit 23b19b7b50fe1867da8d431eea9cd3e4b6328c2c upstream.

muldiv32() contains a snd_BUG_ON() (which is morphed as WARN_ON() with
debug option) for checking the case of 0 / 0.  This would be helpful
if this happens only as a logical error; however, since the hw refine
is performed with any data set provided by user, the inconsistent
values that can trigger such a condition might be passed easily.
Actually, syzbot caught this by passing some zero'ed old hw_params
ioctl.

So, having snd_BUG_ON() there is simply superfluous and rather
harmful to give unnecessary confusions.  Let's get rid of it.

Reported-by: syzbot+7e6ee55011deeebce15d@syzkaller.appspotmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: seq: Make ioctls race-free

commit b3defb791b26ea0683a93a4f49c77ec45ec96f10 upstream.

The ALSA sequencer ioctls have no protection against racy calls while
the concurrent operations may lead to interfere with each other.  As
reported recently, for example, the concurrent calls of setting client
pool with a combination of write calls may lead to either the
unkillable dead-lock or UAF.

As a slightly big hammer solution, this patch introduces the mutex to
make each ioctl exclusive.  Although this may reduce performance via
parallel ioctl calls, usually it's not demanded for sequencer usages,
hence it should be negligible.

Reported-by: Luo Quan <a4651386@163.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

futex: Prevent overflow by strengthen input validation

commit fbe0e839d1e22d88810f3ee3e2f1479be4c0aa4a upstream.

UBSAN reports signed integer overflow in kernel/futex.c:

 UBSAN: Undefined behaviour in kernel/futex.c:2041:18
 signed integer overflow:
 0 - -2147483648 cannot be represented in type 'int'

Add a sanity check to catch negative values of nr_wake and nr_requeue.

Signed-off-by: Li Jinyue <lijinyue@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: peterz@infradead.org
Cc: dvhart@infradead.org
Link: https://lkml.kernel.org/r/1513242294-31786-1-git-send-email-lijinyue@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: sg: disable SET_FORCE_LOW_DMA

commit 745dfa0d8ec26b24f3304459ff6e9eacc5c8351b upstream.

The ioctl SET_FORCE_LOW_DMA has never worked since the initial git
check-in, and the respective setting is nowadays handled correctly. So
disable it entirely.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Tested-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libnvdimm, btt: Fix an incompatibility in the log layout

commit 24e3a7fb60a9187e5df90e5fa655ffc94b9c4f77 upstream.

Due to a spec misinterpretation, the Linux implementation of the BTT log
area had different padding scheme from other implementations, such as
UEFI and NVML.

This fixes the padding scheme, and defaults to it for new BTT layouts.
We attempt to detect the padding scheme in use when probing for an
existing BTT. If we detect the older/incompatible scheme, we continue
using it.

Reported-by: Juston Li <juston.li@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org>
Fixes: 5212e11fde4d ("nd_btt: atomic sector updates")
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.9.77

x86/pti/efi: broken conversion from efi to kernel page table

The page table order must be increased for EFI table in order to avoid a
bug where NMI tries to change the page table to kernel page table, while
efi page table is active.

For more disccussion about this bug, see this thread:
http://lkml.iu.edu/hypermail/linux/kernel/1801.1/00951.html

Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Reviewed-by: Steven Sistare <steven.sistare@oracle.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

objtool: Fix retpoline support for pre-ORC objtool

Objtool 1.0 (pre-ORC) produces the following warning when it encounters
a retpoline:

  arch/x86/crypto/camellia-aesni-avx2-asm_64.o: warning: objtool: .altinstr_replacement+0xf: return instruction outside of a callable function

That warning is meant to catch GCC bugs and missing ENTRY/ENDPROC
annotations, neither of which are applicable to alternatives.  Silence
the warning for alternative instructions, just like objtool 2.0 already
does.

Reported-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/retpoline: Remove compile time warning

commit b8b9ce4b5aec8de9e23cabb0a26b78641f9ab1d6 upstream.

Remove the compile time warning when CONFIG_RETPOLINE=y and the compiler
does not have retpoline support. Linus rationale for this is:

  It's wrong because it will just make people turn off RETPOLINE, and the
  asm updates - and return stack clearing - that are independent of the
  compiler are likely the most important parts because they are likely the
  ones easiest to target.

  And it's annoying because most people won't be able to do anything about
  it. The number of people building their own compiler? Very small. So if
  their distro hasn't got a compiler yet (and pretty much nobody does), the
  warning is just annoying crap.

  It is already properly reported as part of the sysfs interface. The
  compile-time warning only encourages bad things.

Fixes: 76b043848fd2 ("x86/retpoline: Add initial retpoline support")
Requested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: thomas.lendacky@amd.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kees Cook <keescook@google.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Link: https://lkml.kernel.org/r/CA+55aFzWgquv4i6Mab6bASqYXg3ErV3XDFEYf=GEcCDQg5uAtw@mail.gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/x86: Add test_vsyscall

commit 352909b49ba0d74929b96af6dfbefc854ab6ebb5 upstream.

This tests that the vsyscall entries do what they're expected to do.
It also confirms that attempts to read the vsyscall page behave as
expected.

If changes are made to the vsyscall code or its memory map handling,
running this test in all three of vsyscall=none, vsyscall=emulate,
and vsyscall=native are helpful.

(Because it's easy, this also compares the vsyscall results to their
 vDSO equivalents.)

Note to KAISER backporters: please test this under all three
vsyscall modes.  Also, in the emulate and native modes, make sure
that test_vsyscall_64 agrees with the command line or config
option as to which mode you're in.  It's quite easy to mess up
the kernel such that native mode accidentally emulates
or vice versa.

Greg, etc: please backport this to all your Meltdown-patched
kernels.  It'll help make sure the patches didn't regress
vsyscalls.

CSigned-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/2b9c5a174c1d60fd7774461d518aa75598b1d8fd.1515719552.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/retpoline: Fill return stack buffer on vmexit

commit 117cc7a908c83697b0b737d15ae1eb5943afe35b upstream.

In accordance with the Intel and AMD documentation, we need to overwrite
all entries in the RSB on exiting a guest, to prevent malicious branch
target predictions from affecting the host kernel. This is needed both
for retpoline and for IBRS.

[ak: numbers again for the RSB stuffing labels]

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: thomas.lendacky@amd.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kees Cook <keescook@google.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: https://lkml.kernel.org/r/1515755487-8524-1-git-send-email-dwmw@amazon.co.uk
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/retpoline/irq32: Convert assembler indirect jumps

commit 7614e913db1f40fff819b36216484dc3808995d4 upstream.

Convert all indirect jumps in 32bit irq inline asm code to use non
speculative sequences.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: Rik van Riel <riel@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: thomas.lendacky@amd.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kees Cook <keescook@google.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: https://lkml.kernel.org/r/1515707194-20531-12-git-send-email-dwmw@amazon.co.uk
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/retpoline/checksum32: Convert assembler indirect jumps

commit 5096732f6f695001fa2d6f1335a2680b37912c69 upstream.

Convert all indirect jumps in 32bit checksum assembler code to use
non-speculative sequences when CONFIG_RETPOLINE is enabled.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: thomas.lendacky@amd.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kees Cook <keescook@google.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: https://lkml.kernel.org/r/1515707194-20531-11-git-send-email-dwmw@amazon.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/retpoline/xen: Convert Xen hypercall indirect jumps

commit ea08816d5b185ab3d09e95e393f265af54560350 upstream.

Convert indirect call in Xen hypercall to use non-speculative sequence,
when CONFIG_RETPOLINE is enabled.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: thomas.lendacky@amd.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kees Cook <keescook@google.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: https://lkml.kernel.org/r/1515707194-20531-10-git-send-email-dwmw@amazon.co.uk
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/retpoline/hyperv: Convert assembler indirect jumps

commit e70e5892b28c18f517f29ab6e83bd57705104b31 upstream.

Convert all indirect jumps in hyperv inline asm code to use non-speculative
sequences when CONFIG_RETPOLINE is enabled.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: thomas.lendacky@amd.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kees Cook <keescook@google.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: https://lkml.kernel.org/r/1515707194-20531-9-git-send-email-dwmw@amazon.co.uk
[ backport to 4.9, hopefully correct, not tested... - gregkh ]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/retpoline/ftrace: Convert ftrace assembler indirect jumps

commit 9351803bd803cdbeb9b5a7850b7b6f464806e3db upstream.

Convert all indirect jumps in ftrace assembler code to use non-speculative
sequences when CONFIG_RETPOLINE is enabled.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: thomas.lendacky@amd.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kees Cook <keescook@google.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: https://lkml.kernel.org/r/1515707194-20531-8-git-send-email-dwmw@amazon.co.uk
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/retpoline/entry: Convert entry assembler indirect jumps

commit 2641f08bb7fc63a636a2b18173221d7040a3512e upstream.

Convert indirect jumps in core 32/64bit entry assembler code to use
non-speculative sequences when CONFIG_RETPOLINE is enabled.

Don't use CALL_NOSPEC in entry_SYSCALL_64_fastpath because the return
address after the 'call' instruction must be *precisely* at the
.Lentry_SYSCALL_64_after_fastpath label for stub_ptregs_64 to work,
and the use of alternatives will mess that up unless we play horrid
games to prepend with NOPs and make the variants the same length. It's
not worth it; in the case where we ALTERNATIVE out the retpoline, the
first instruction at __x86.indirect_thunk.rax is going to be a bare
jmp *%rax anyway.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: thomas.lendacky@amd.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kees Cook <keescook@google.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: https://lkml.kernel.org/r/1515707194-20531-7-git-send-email-dwmw@amazon.co.uk
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/retpoline/crypto: Convert crypto assembler indirect jumps

commit 9697fa39efd3fc3692f2949d4045f393ec58450b upstream.

Convert all indirect jumps in crypto assembler code to use non-speculative
sequences when CONFIG_RETPOLINE is enabled.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: thomas.lendacky@amd.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kees Cook <keescook@google.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: https://lkml.kernel.org/r/1515707194-20531-6-git-send-email-dwmw@amazon.co.uk
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/spectre: Add boot time option to select Spectre v2 mitigation

commit da285121560e769cc31797bba6422eea71d473e0 upstream.

Add a spectre_v2= option to select the mitigation used for the indirect
branch speculation vulnerability.

Currently, the only option available is retpoline, in its various forms.
This will be expanded to cover the new IBRS/IBPB microcode features.

The RETPOLINE_AMD feature relies on a serializing LFENCE for speculation
control. For AMD hardware, only set RETPOLINE_AMD if LFENCE is a
serializing instruction, which is indicated by the LFENCE_RDTSC feature.

[ tglx: Folded back the LFENCE/AMD fixes and reworked it so IBRS
   integration becomes simple ]

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: thomas.lendacky@amd.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kees Cook <keescook@google.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: https://lkml.kernel.org/r/1515707194-20531-5-git-send-email-dwmw@amazon.co.uk
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/retpoline: Add initial retpoline support

commit 76b043848fd22dbf7f8bf3a1452f8c70d557b860 upstream.

Enable the use of -mindirect-branch=thunk-extern in newer GCC, and provide
the corresponding thunks. Provide assembler macros for invoking the thunks
in the same way that GCC does, from native and inline assembler.

This adds X86_FEATURE_RETPOLINE and sets it by default on all CPUs. In
some circumstances, IBRS microcode features may be used instead, and the
retpoline can be disabled.

On AMD CPUs if lfence is serialising, the retpoline can be dramatically
simplified to a simple "lfence; jmp *\reg". A future patch, after it has
been verified that lfence really is serialising in all circumstances, can
enable this by setting the X86_FEATURE_RETPOLINE_AMD feature bit in addition
to X86_FEATURE_RETPOLINE.

Do not align the retpoline in the altinstr section, because there is no
guarantee that it stays aligned when it's copied over the oldinstr during
alternative patching.

[ Andi Kleen: Rename the macros, add CONFIG_RETPOLINE option, export thunks]
[ tglx: Put actual function CALL/JMP in front of the macros, convert to
   symbolic labels ]
[ dwmw2: Convert back to numeric labels, merge objtool fixes ]

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: thomas.lendacky@amd.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kees Cook <keescook@google.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: https://lkml.kernel.org/r/1515707194-20531-4-git-send-email-dwmw@amazon.co.uk
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/asm: Use register variable to get stack pointer value

commit 196bd485ee4f03ce4c690bfcf38138abfcd0a4bc upstream.

Currently we use current_stack_pointer() function to get the value
of the stack pointer register. Since commit:

  f5caf621ee35 ("x86/asm: Fix inline asm call constraints for Clang")

... we have a stack register variable declared. It can be used instead of
current_stack_pointer() function which allows to optimize away some
excessive "mov %rsp, %<dst>" instructions:

 -mov    %rsp,%rdx
 -sub    %rdx,%rax
 -cmp    $0x3fff,%rax
 -ja     ffffffff810722fd <ist_begin_non_atomic+0x2d>

 +sub    %rsp,%rax
 +cmp    $0x3fff,%rax
 +ja     ffffffff810722fa <ist_begin_non_atomic+0x2a>

Remove current_stack_pointer(), rename __asm_call_sp to current_stack_pointer
and use it instead of the removed function.

Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170929141537.29167-1-aryabinin@virtuozzo.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
[dwmw2: We want ASM_CALL_CONSTRAINT for retpoline]
Signed-off-by: David Woodhouse <dwmw@amazon.co.ku>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

objtool: Allow alternatives to be ignored

commit 258c76059cece01bebae098e81bacb1af2edad17 upstream.

Getting objtool to understand retpolines is going to be a bit of a
challenge.  For now, take advantage of the fact that retpolines are
patched in with alternatives.  Just read the original (sane)
non-alternative instruction, and ignore the patched-in retpoline.

This allows objtool to understand the control flow *around* the
retpoline, even if it can't yet follow what's inside.  This means the
ORC unwinder will fail to unwind from inside a retpoline, but will work
fine otherwise.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: thomas.lendacky@amd.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kees Cook <keescook@google.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: https://lkml.kernel.org/r/1515707194-20531-3-git-send-email-dwmw@amazon.co.uk
[dwmw2: Applies to tools/objtool/builtin-check.c not check.[ch]]
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

objtool: Detect jumps to retpoline thunks

commit 39b735332cb8b33a27c28592d969e4016c86c3ea upstream.

A direct jump to a retpoline thunk is really an indirect jump in
disguise.  Change the objtool instruction type accordingly.

Objtool needs to know where indirect branches are so it can detect
switch statement jump tables.

This fixes a bunch of warnings with CONFIG_RETPOLINE like:

  arch/x86/events/intel/uncore_nhmex.o: warning: objtool: nhmex_rbox_msr_enable_event()+0x44: sibling call from callable instruction with modified stack frame
  kernel/signal.o: warning: objtool: copy_siginfo_to_user()+0x91: sibling call from callable instruction with modified stack frame
  ...

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: thomas.lendacky@amd.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kees Cook <keescook@google.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: https://lkml.kernel.org/r/1515707194-20531-2-git-send-email-dwmw@amazon.co.uk
[dwmw2: Applies to tools/objtool/builtin-check.c not check.c]
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

objtool, modules: Discard objtool annotation sections for modules

commit e390f9a9689a42f477a6073e2e7df530a4c1b740 upstream.

The '__unreachable' and '__func_stack_frame_non_standard' sections are
only used at compile time.  They're discarded for vmlinux but they
should also be discarded for modules.

Since this is a recurring pattern, prefix the section names with
".discard.".  It's a nice convention and vmlinux.lds.h already discards
such sections.

Also remove the 'a' (allocatable) flag from the __unreachable section
since it doesn't make sense for a discarded section.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jessica Yu <jeyu@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: d1091c7fa3d5 ("objtool: Improve detection of BUG() and other dead ends")
Link: http://lkml.kernel.org/r/20170301180444.lhd53c5tibc4ns77@treble
Signed-off-by: Ingo Molnar <mingo@kernel.org>
[dwmw2: Remove the unreachable part in backporting since it's not here yet]
Signed-off-by: David Woodhouse <dwmw@amazon.co.ku>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm/32: Move setup_clear_cpu_cap(X86_FEATURE_PCID) earlier

commit b8b7abaed7a49b350f8ba659ddc264b04931d581 upstream.

Otherwise we might have the PCID feature bit set during cpu_init().

This is just for robustness.  I haven't seen any actual bugs here.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: cba4671af755 ("x86/mm: Disable PCID on 32-bit kernels")
Link: http://lkml.kernel.org/r/b16dae9d6b0db5d9801ddbebbfd83384097c61f3.1505663533.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/alternatives: Add missing '\n' at end of ALTERNATIVE inline asm

commit b9e705ef7cfaf22db0daab91ad3cd33b0fa32eb9 upstream.

Where an ALTERNATIVE is used in the middle of an inline asm block, this
would otherwise lead to the following instruction being appended directly
to the trailing ".popsection", and a failed compile.

Fixes: 9cebed423c84 ("x86, alternative: Use .pushsection/.popsection")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: Rik van Riel <riel@redhat.com>
Cc: ak@linux.intel.com
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Turner <pjt@google.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kees Cook <keescook@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180104143710.8961-8-dwmw@amazon.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/alternatives: Fix optimize_nops() checking

commit 612e8e9350fd19cae6900cf36ea0c6892d1a0dca upstream.

The alternatives code checks only the first byte whether it is a NOP, but
with NOPs in front of the payload and having actual instructions after it
breaks the "optimized' test.

Make sure to scan all bytes before deciding to optimize the NOPs in there.

Reported-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Andrew Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: https://lkml.kernel.org/r/20180110112815.mgciyf5acwacphkq@pd.tnic
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sysfs/cpu: Fix typos in vulnerability documentation

commit 9ecccfaa7cb5249bd31bdceb93fcf5bedb8a24d8 upstream.

Fixes: 87590ce6e ("sysfs/cpu: Add vulnerability folder")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/cpu/AMD: Use LFENCE_RDTSC in preference to MFENCE_RDTSC

commit 9c6a73c75864ad9fa49e5fa6513e4c4071c0e29f upstream.

With LFENCE now a serializing instruction, use LFENCE_RDTSC in preference
to MFENCE_RDTSC.  However, since the kernel could be running under a
hypervisor that does not support writing that MSR, read the MSR back and
verify that the bit has been set successfully.  If the MSR can be read
and the bit is set, then set the LFENCE_RDTSC feature, otherwise set the
MFENCE_RDTSC feature.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Paul Turner <pjt@google.com>
Link: https://lkml.kernel.org/r/20180108220932.12580.52458.stgit@tlendack-t1.amdoffice.net
Signed-off-by: Razvan Ghitulete <rga@amazon.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>