OSDN Git Service
Denis V. Lunev [Tue, 28 Apr 2015 07:46:59 +0000 (10:46 +0300)]
block/parallels: optimize linear image expansion
Plain image expansion spends a lot of time to update image file size.
This seriously affects the performance. The following simple test
qemu_img create -f parallels -o cluster_size=64k ./1.hds 64G
qemu_io -n -c "write -P 0x11 0 1024M" ./1.hds
could be improved if the format driver will pre-allocate some space
in the image file with a reasonable chunk.
This patch preallocates 128 Mb using bdrv_write_zeroes, which should
normally use fallocate() call inside. Fallback to older truncate()
could be used as a fallback using image open options thanks to the
previous patch.
The benefit is around 15%.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Karan <rkagan@parallels.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id:
1430207220-24458-27-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Denis V. Lunev [Tue, 28 Apr 2015 07:46:58 +0000 (10:46 +0300)]
block/parallels: add prealloc-mode and prealloc-size open paramemets
This is preparational commit for tweaks in Parallels image expansion.
The idea is that enlarge via truncate by one data block is slow. It
would be much better to use fallocate via bdrv_write_zeroes and
expand by some significant amount at once.
Original idea with sequential file writing to the end of the file without
fallocate/truncate would be slower than this approach if the image is
expanded with several operations:
- each image expanding means file metadata update, i.e. filesystem
journal write. Truncate/write to newly truncated space update file
metadata twice thus truncate removal helps. With fallocate call
inside bdrv_write_zeroes file metadata is updated only once and
this should happen infrequently thus this approach is the best one
for the image expansion
- tail writes are ordered, i.e. the guest IO queue could not be sent
immediately to the host introducing additional IO delays
This patch just adds proper parameters into BDRVParallelsState and
performs options parsing in parallels_open.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id:
1430207220-24458-26-git-send-email-den@openvz.org
CC: Roman Kagan <rkagan@parallels.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Denis V. Lunev [Tue, 28 Apr 2015 07:46:57 +0000 (10:46 +0300)]
block/parallels: delay writing to BAT till bdrv_co_flush_to_os
The idea is that we do not need to immediately sync BAT to the image as
from the guest point of view there is a possibility that IO is lost
even in the physical controller until flush command was finished.
bdrv_co_flush_to_os is exactly the right place for this purpose.
Technically the patch uses loaded BAT data as a cache and performs
actual on-disk metadata updates in parallels_co_flush_to_os callback.
This patch speed ups
qemu-img create -f parallels -o cluster_size=64k ./1.hds 64G
qemu-io -f parallels -c "write -P 0x11 0 1024k" 1.hds
writing from 50-60 Mb/sec to 80-90 Mb/sec on rotational media and
from 160 Mb/sec to 190 Mb/sec on SSD disk.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id:
1430207220-24458-25-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Denis V. Lunev [Tue, 28 Apr 2015 07:46:56 +0000 (10:46 +0300)]
block/parallels: create bat_entry_off helper
calculate offset of the BAT entry in the image file.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id:
1430207220-24458-24-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Denis V. Lunev [Tue, 28 Apr 2015 07:46:55 +0000 (10:46 +0300)]
block/parallels: improve image reading performance
Try to perform IO for the biggest continuous block possible.
The performance for sequential read is increased from 220 Mb/sec to
360 Mb/sec for continous image on my SSD HDD.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id:
1430207220-24458-23-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Denis V. Lunev [Tue, 28 Apr 2015 07:46:54 +0000 (10:46 +0300)]
iotests, parallels: check for incorrectly closed image in tests
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id:
1430207220-24458-22-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Denis V. Lunev [Tue, 28 Apr 2015 07:46:53 +0000 (10:46 +0300)]
block/parallels: implement incorrect close detection
The software driver must set inuse field in Parallels header to
0x746F6E59 when the image is opened in read-write mode. The presence of
this magic in the header on open forces image consistency check.
There is an unfortunate trick here. We can not check for inuse in
parallels_check as this will happen too late. It is possible to do
that for simple check, but during the fix this would always report
an error as the image was opened in BDRV_O_RDWR mode. Thus we save
the flag in BDRVParallelsState for this.
On the other hand, nothing should be done to clear inuse in
parallels_check. Generic close will do the job right.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id:
1430207220-24458-21-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Denis V. Lunev [Tue, 28 Apr 2015 07:46:52 +0000 (10:46 +0300)]
block/parallels: implement parallels_check method of block driver
The check is very simple at the moment. It calculates necessary stats
and fix only the following errors:
- space leak at the end of the image. This would happens due to
preallocation
- clusters outside the image are zeroed. Nothing else could be done here
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id:
1430207220-24458-20-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Denis V. Lunev [Tue, 28 Apr 2015 07:46:51 +0000 (10:46 +0300)]
block/parallels: move parallels_open/probe to the very end of the file
This will help to avoid forward declarations for upcoming parallels_check
Some very obvious formatting fixes were made to the moved code to make
checkpatch happy.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id:
1430207220-24458-19-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Denis V. Lunev [Tue, 28 Apr 2015 07:46:50 +0000 (10:46 +0300)]
block/parallels: read parallels image header and BAT into single buffer
This metadata cache would allow to properly batch BAT updates to disk
in next patches. These updates will be properly aligned to avoid
read-modify-write transactions on block level.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id:
1430207220-24458-18-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Denis V. Lunev [Tue, 28 Apr 2015 07:46:49 +0000 (10:46 +0300)]
block/parallels: keep BAT bitmap data in little endian in memory
This will allow to use this data as buffer to BAT update directly
without any intermediate buffers.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id:
1430207220-24458-17-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Denis V. Lunev [Tue, 28 Apr 2015 07:46:48 +0000 (10:46 +0300)]
block/parallels: create bat2sect helper
deduplicate copy/paste arithmetcs
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id:
1430207220-24458-16-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Denis V. Lunev [Tue, 28 Apr 2015 07:46:47 +0000 (10:46 +0300)]
block/parallels: rename catalog_ names to bat_
BAT means 'block allocation table'. Thus this name is clean and shorter
on writing.
Some obvious formatting fixes in the old code were made to make checkpatch
happy.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id:
1430207220-24458-15-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Denis V. Lunev [Tue, 28 Apr 2015 07:46:46 +0000 (10:46 +0300)]
parallels: change copyright information in the image header
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id:
1430207220-24458-14-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Denis V. Lunev [Tue, 28 Apr 2015 07:46:45 +0000 (10:46 +0300)]
iotests, parallels: test for newly created parallels image via qemu-img
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id:
1430207220-24458-13-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Denis V. Lunev [Tue, 28 Apr 2015 07:46:44 +0000 (10:46 +0300)]
block/parallels: support parallels image creation
Do not even care to create WithoutFreeSpace image, it is obsolete.
Always create WithouFreSpacExt one.
The code also does not spend a lot of efforts to fill cylinders and
heads fields, they are not used actually in a real life neither in
QEMU nor in Parallels products.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id:
1430207220-24458-12-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Denis V. Lunev [Tue, 28 Apr 2015 07:46:43 +0000 (10:46 +0300)]
iotests, parallels: test for write into Parallels image
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id:
1430207220-24458-11-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Denis V. Lunev [Tue, 28 Apr 2015 07:46:42 +0000 (10:46 +0300)]
block/parallels: _co_writev callback for Parallels format
Support write on Parallels images. The code is almost the same as one
in the previous patch implemented scatter-gather IO for read.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id:
1430207220-24458-10-git-send-email-den@openvz.org
CC: Roman Kagan <rkagan@parallels.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Denis V. Lunev [Tue, 28 Apr 2015 07:46:41 +0000 (10:46 +0300)]
block/parallels: mark parallels format driver as zero inited
From the guest point of view unallocated blocks are zeroed.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id:
1430207220-24458-9-git-send-email-den@openvz.org
CC: Roman Kagan <rkagan@parallels.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Denis V. Lunev [Tue, 28 Apr 2015 07:46:40 +0000 (10:46 +0300)]
block/parallels: replace magic constants 4, 64 with proper sizeofs
simple purification..
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id:
1430207220-24458-8-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Denis V. Lunev [Tue, 28 Apr 2015 07:46:39 +0000 (10:46 +0300)]
block/parallels: provide _co_readv routine for parallels format driver
Main approach is taken from qcow2_co_readv.
The patch drops coroutine lock for the duration of IO operation and
peforms normal scatter-gather IO using standard QEMU backend.
The patch also adds comment about locking considerations in the driver.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Message-id:
1430207220-24458-7-git-send-email-den@openvz.org
CC: Roman Kagan <rkagan@parallels.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Roman Kagan [Tue, 28 Apr 2015 07:46:38 +0000 (10:46 +0300)]
block/parallels: add get_block_status
Implement VFS method for get_block_status to Parallels format driver.
qemu_co_mutex_lock is not necessary yet (the driver is read-only) but
will be necessary very soon when write will be supported.
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Message-id:
1430207220-24458-6-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Roman Kagan [Tue, 28 Apr 2015 07:46:37 +0000 (10:46 +0300)]
block/parallels: read up to cluster end in one go
Teach parallels_read() to do reads in coarser granularity than just a
single sector: if requested, read up to the cluster end in one go.
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id:
1430207220-24458-5-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Roman Kagan [Tue, 28 Apr 2015 07:46:36 +0000 (10:46 +0300)]
block/parallels: switch to bdrv_read
Switch the .bdrv_read method implementation from using bdrv_pread() to
bdrv_read() on the underlying file, since the latter is subject to i/o
throttling while the former is not.
Besides, since bdrv_read() operates in sectors rather than bytes, adjust
the helper functions to do so too.
Signed-off-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Message-id:
1430207220-24458-4-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Denis V. Lunev [Tue, 28 Apr 2015 07:46:35 +0000 (10:46 +0300)]
block/parallels: rename parallels_header to ParallelsHeader
this follows QEMU coding convention
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id:
1430207220-24458-3-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Denis V. Lunev [Tue, 28 Apr 2015 07:46:34 +0000 (10:46 +0300)]
iotests, parallels: quote TEST_IMG in 076 test to be path-safe
suggested by Jeff Cody
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id:
1430207220-24458-2-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Peter Maydell [Thu, 21 May 2015 08:07:19 +0000 (09:07 +0100)]
Merge remote-tracking branch 'remotes/kraxel/tags/pull-vnc-
20150520-1' into staging
vnc: misc fixes.
# gpg: Signature made Wed May 20 09:32:45 2015 BST using RSA key ID
D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/kraxel/tags/pull-vnc-
20150520-1:
qemu-sockets: Report explicit error if unlink fails
vnc: Tweak error when init fails
vnc: Don't assert if opening unix socket fails
ui: remove check for failure of qemu_acl_init()
Strip brackets from vnc host
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cole Robinson [Tue, 5 May 2015 15:07:19 +0000 (11:07 -0400)]
qemu-sockets: Report explicit error if unlink fails
Consider this case:
$ ls -ld ~/root-owned/
drwx--x--x. 2 root root 4096 Apr 29 12:55 /home/crobinso/root-owned/
$ ls -l ~/root-owned/foo.sock
-rwxrwxrwx. 1 crobinso crobinso 0 Apr 29 12:55 /home/crobinso/root-owned/foo.sock
$ qemu-system-x86_64 -vnc unix:~/root-owned/foo.sock
qemu-system-x86_64: -vnc unix:/home/crobinso/root-owned/foo.sock: Failed to start VNC server: Failed to bind socket to /home/crobinso/root-owned/foo.sock: Address already in use
...which is techinically true, but the real error is that we failed to
unlink. So report it.
This may seem pathological but it's a real possibility via libvirt.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Cole Robinson [Tue, 5 May 2015 15:07:18 +0000 (11:07 -0400)]
vnc: Tweak error when init fails
Before:
qemu-system-x86_64: -display vnc=unix:/root/foo.sock: Failed to start VNC server on `(null)': Failed to bind socket to /root/foo.sock: Permission denied
After:
qemu-system-x86_64: -display vnc=unix:/root/foo.sock: Failed to start VNC server: Failed to bind socket to /root/foo.sock: Permission denied
Rather than tweak the string possibly show unix: value as well,
just drop the explicit display reporting. We already get the cli
string in the error message, that should be sufficient.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Cole Robinson [Tue, 5 May 2015 15:07:17 +0000 (11:07 -0400)]
vnc: Don't assert if opening unix socket fails
Reproducer:
$ qemu-system-x86_64 -display vnc=unix:/root/i-cant-access-you.sock
qemu-system-x86_64: iohandler.c:60: qemu_set_fd_handler2: Assertion `fd >= 0' failed.
Aborted (core dumped)
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Daniel P. Berrange [Fri, 1 May 2015 10:44:46 +0000 (11:44 +0100)]
ui: remove check for failure of qemu_acl_init()
The qemu_acl_init() function has long since stopped being able
to return NULL, since g_malloc will abort on OOM. As such the
checks for NULL were unreachable code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
JĂ¡n Tomko [Mon, 27 Apr 2015 15:03:14 +0000 (17:03 +0200)]
Strip brackets from vnc host
Commit
v2.2.0-1530-ge556032 vnc: switch to inet_listen_opts
bypassed the use of inet_parse in inet_listen, making literal
IPv6 addresses enclosed in brackets fail:
qemu-kvm: -vnc [::1]:0: Failed to start VNC server on `(null)': address
resolution failed for [::1]:5900: Name or service not known
Strip the brackets to make it work again.
Signed-off-by: JĂ¡n Tomko <jtomko@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Peter Maydell [Tue, 19 May 2015 13:10:33 +0000 (14:10 +0100)]
Merge remote-tracking branch 'remotes/kraxel/tags/pull-serial-
20150519-1' into staging
serial: fix multi-pci card error cleanup.
# gpg: Signature made Tue May 19 11:47:29 2015 BST using RSA key ID
D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/kraxel/tags/pull-serial-
20150519-1:
serial: fix multi-pci card error cleanup.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Gerd Hoffmann [Wed, 6 May 2015 10:58:19 +0000 (12:58 +0200)]
serial: fix multi-pci card error cleanup.
Put the number of serial ports into a local variable in
multi_serial_pci_realize, then increment the port count
(pci->ports) as we initialize the serial port cores.
Now pci->ports always holds the number of successfully
initialized ports and we can use multi_serial_pci_exit
to properly cleanup the already initialized bits in case
of a init failure.
https://bugzilla.redhat.com/show_bug.cgi?id=970551
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Maydell [Tue, 19 May 2015 10:47:03 +0000 (11:47 +0100)]
Merge remote-tracking branch 'remotes/kraxel/tags/pull-vga-
20150519-1' into staging
hw/display: qomify vga cards
# gpg: Signature made Tue May 19 11:23:09 2015 BST using RSA key ID
D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/kraxel/tags/pull-vga-
20150519-1:
vga-pci: QOMify
qxl: QOMify
cirrus_vga: QOMify
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Gonglei [Tue, 12 May 2015 09:27:08 +0000 (17:27 +0800)]
vga-pci: QOMify
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gonglei [Tue, 12 May 2015 09:27:10 +0000 (17:27 +0800)]
qxl: QOMify
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gonglei [Tue, 12 May 2015 09:27:09 +0000 (17:27 +0800)]
cirrus_vga: QOMify
QOMify pci-cirrus-vga like isa-cirrus-vga device.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Peter Maydell [Tue, 19 May 2015 09:25:59 +0000 (10:25 +0100)]
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-cocoa-
20150519' into staging
cocoa queue:
* fix various issues with full screen in the OSX UI
* set an icon for our binary file
* add entries to the View menu for QEMU consoles
* fix various warnings that are produced when building on 10.10
(largely deprecated interfaces)
# gpg: Signature made Tue May 19 09:17:23 2015 BST using RSA key ID
14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-cocoa-
20150519:
ui/cocoa: Add console items to the View menu
ui/cocoa: Avoid deprecated NSOKButton/NSCancelButton constants
ui/cocoa: Don't use NSWindow useOptimizedDrawing on OSX 10.10 and up
ui/cocoa: Declare that QemuCocoaAppController implements NSApplicationDelegate
ui/cocoa: openPanelDidEnd returnCode should be NSInteger, not int
ui/cocoa: Remove compatibility ifdefs for OSX 10.4
ui/cocoa: Drop tests for CGImageCreateWithImageInRect support
Makefile.target: set icon for binary file on Mac OS X
ui/cocoa: Make -full-screen option work on Mac OS X
ui/cocoa: Fix several full screen issues on Mac OS X
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Programmingkid [Tue, 19 May 2015 08:11:18 +0000 (09:11 +0100)]
ui/cocoa: Add console items to the View menu
Add any console that is available to the current emulator as a
menu item under the View menu.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
[PMM: Adjusted to apply after zoom-to-fit menu item was added;
create the View menu at the same time as all the others, and only
add the dynamically-determined items to it later]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 19 May 2015 08:11:18 +0000 (09:11 +0100)]
ui/cocoa: Avoid deprecated NSOKButton/NSCancelButton constants
In OSX 10.10, the NSOKButton and NSCancelButton constants are deprecated
and provoke compiler warnings. Avoid them by using the
NSFileHandlingPanelCancelButton and NSFileHandlingPanelOKButton constants
instead. These are the documented correct constants for the 10.6-and-up
beginSheetModalForWindow API we use. We also use the same method for
the pre-10.6 compatibility code path, but conveniently the constant
values are the same and the constant names have been present since 10.0.
Preferring the constant names that match the non-legacy API makes more
sense anyway.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id:
1431296361-16981-7-git-send-email-peter.maydell@linaro.org
Peter Maydell [Tue, 19 May 2015 08:11:18 +0000 (09:11 +0100)]
ui/cocoa: Don't use NSWindow useOptimizedDrawing on OSX 10.10 and up
Starting in OSX 10.10, NSWindow useOptimizedDrawing is deprecated, so
don't use it there.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id:
1431296361-16981-6-git-send-email-peter.maydell@linaro.org
Peter Maydell [Tue, 19 May 2015 08:11:18 +0000 (09:11 +0100)]
ui/cocoa: Declare that QemuCocoaAppController implements NSApplicationDelegate
Our class QemuCocoaAppController implements the NSApplicationDelegate
interface, and we pass an object of this class to [NSApp setDelegate].
However, we weren't declaring in the class definition that we implemented
this interface; in OSX 10.10 this provokes the following (slighly
misleading) warning:
ui/cocoa.m:1031:24: warning: sending 'QemuCocoaAppController *' to parameter of
incompatible type 'id<NSFileManagerDelegate>'
[NSApp setDelegate:appController];
^~~~~~~~~~~~~
/System/Library/Frameworks/Foundation.framework/Headers/NSFileManager.h:109:47:
note: passing argument to parameter 'delegate' here
@property (assign) id <NSFileManagerDelegate> delegate NS_AVAILABLE(10_5,
2_0);
^
Annoyingly, this interface wasn't formally defined until OSX 10.6, so we
have to surround the relevant part of the @interface line with an ifdef.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id:
1431296361-16981-5-git-send-email-peter.maydell@linaro.org
Peter Maydell [Tue, 19 May 2015 08:11:18 +0000 (09:11 +0100)]
ui/cocoa: openPanelDidEnd returnCode should be NSInteger, not int
The type for openPanelDidEnd's returnCode argument should be NSInteger,
not int. This only matters for the OSX 10.5 code path where we pass
the method directly to an OSX function to call.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id:
1431296361-16981-4-git-send-email-peter.maydell@linaro.org
Peter Maydell [Tue, 19 May 2015 08:11:17 +0000 (09:11 +0100)]
ui/cocoa: Remove compatibility ifdefs for OSX 10.4
Remove compatibility ifdefs that work around OSX 10.4 not providing
various typedefs and functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id:
1431296361-16981-3-git-send-email-peter.maydell@linaro.org
Peter Maydell [Tue, 19 May 2015 08:11:17 +0000 (09:11 +0100)]
ui/cocoa: Drop tests for CGImageCreateWithImageInRect support
The code that tries to test at both compiletime and runtime
for whether CGImageCreateWithImageInRect is supported provokes
a compile warning on OSX 10.3:
ui/cocoa.m:378:13: warning: comparison of function 'CGImageCreateWithImageInRect'
equal to a null pointer is always false[-Wtautological-pointer-compare]
if (CGImageCreateWithImageInRect == NULL) { // test if "CGImageCreateWithImageInRect" is
supported on host at runtime
^~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~
The simplest way to deal with this is just to drop this code,
since we don't in practice support OSX 10.4 anyway. (10.5 was
released in 2007 and is the last PPC version, so is the earliest
we really need to continue to support at all.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id:
1431296361-16981-2-git-send-email-peter.maydell@linaro.org
Programmingkid [Tue, 19 May 2015 08:11:17 +0000 (09:11 +0100)]
Makefile.target: set icon for binary file on Mac OS X
Implements setting the icon for the binary file in Mac OS X.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
[PMM: tweaked makefile to use $@ and quiet-command]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Programmingkid [Tue, 19 May 2015 08:11:17 +0000 (09:11 +0100)]
ui/cocoa: Make -full-screen option work on Mac OS X
This patch makes the -full-screen option actually instruct QEMU to
enter fullscreen at startup, on Mac OS X.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Programmingkid [Tue, 19 May 2015 08:11:17 +0000 (09:11 +0100)]
ui/cocoa: Fix several full screen issues on Mac OS X
This patch makes several changes:
- Minimizes distorted full screen display by respecting aspect
ratios.
- Makes full screen mode available on Mac OS 10.7 and higher.
- Allows user to decide if video should be stretched to fill the
screen, using a menu item called "Zoom To Fit".
- Hides the normalWindow so it won't show up in full screen mode.
- Allows user to exit full screen mode.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
[PMM: minor whitespace tweaks, remove incorrectly duplicated
use of 'f' menu accelerator key]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 18 May 2015 19:23:16 +0000 (20:23 +0100)]
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-
20150518-3' into staging
target-arm:
* New board model: xlnx-ep108
* Some more preparation for AArch64 EL2/EL3
* Fix bugs in access checking for generic counter registers
* Remove a stray '+' sign
# gpg: Signature made Mon May 18 20:13:05 2015 BST using RSA key ID
14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-
20150518-3: (21 commits)
target-arm: Remove unneeded '+'
target-arm: Correct accessfn for CNTV_TVAL_EL0
target-arm: Correct accessfn for CNTP_{CT}VAL_EL0
target-arm: Add WFx syndrome function
target-arm: Add EL3 and EL2 TCR checking
target-arm: Add TTBR regime function and use
linux-user/arm: Correct TARGET_NR_timerfd to TARGET_NR_timerfd_create
arm: xlnx-ep108: Add bootloading
arm: xlnx-ep108: Add external RAM
arm: Add xlnx-ep108 machine
arm: xlnx-zynqmp: Add UART support
char: cadence_uart: Split state struct and type into header
char: cadence_uart: Clean up variable names
arm: xlnx-zynqmp: Add GEM support
net: cadence_gem: Split state struct and type into header
net: cadence_gem: Clean up variable names
arm: xlnx-zynqmp: Connect CPU Timers to GIC
arm: xlnx-zynqmp: Add GIC
arm: Introduce Xilinx ZynqMP SoC
target-arm: cpu64: Add support for Cortex-A53
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Edgar E. Iglesias [Wed, 13 May 2015 06:52:28 +0000 (16:52 +1000)]
target-arm: Remove unneeded '+'
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id:
1431499963-1019-4-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Edgar E. Iglesias [Wed, 13 May 2015 06:52:27 +0000 (16:52 +1000)]
target-arm: Correct accessfn for CNTV_TVAL_EL0
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
1431499963-1019-3-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Edgar E. Iglesias [Wed, 13 May 2015 06:52:26 +0000 (16:52 +1000)]
target-arm: Correct accessfn for CNTP_{CT}VAL_EL0
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
1431499963-1019-2-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Greg Bellows [Wed, 22 Apr 2015 17:09:20 +0000 (12:09 -0500)]
target-arm: Add WFx syndrome function
Adds a utility function for creating a WFx exception syndrome
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
1429722561-12651-9-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Greg Bellows [Wed, 22 Apr 2015 17:09:19 +0000 (12:09 -0500)]
target-arm: Add EL3 and EL2 TCR checking
Updated get_phys_addr_lpae to check the appropriate TTBCR/TCR depending on the
current EL. Support includes using the different TCR format as well as checks to
insure TTBR1 is not used when in EL2 or EL3.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
1429722561-12651-8-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Greg Bellows [Wed, 22 Apr 2015 17:09:18 +0000 (12:09 -0500)]
target-arm: Add TTBR regime function and use
Add a utility function for choosing the correct TTBR system register based on
the specified MMU index. Add use of function on physical address lookup.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
1429722561-12651-7-git-send-email-greg.bellows@linaro.org
[PMM: fixed regime_ttbr() return type to be uint64_t]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Timothy Baldwin [Wed, 8 Apr 2015 20:40:52 +0000 (21:40 +0100)]
linux-user/arm: Correct TARGET_NR_timerfd to TARGET_NR_timerfd_create
Misspelled system call name in macro was causing timerfd_create not
to be supported for the ARM target.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Crosthwaite [Fri, 15 May 2015 02:23:30 +0000 (19:23 -0700)]
arm: xlnx-ep108: Add bootloading
Add bootloader support using standard ARM bootloader.
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id:
b829abaf2b70d02b28e79301553cbd74afc416a1.
1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Crosthwaite [Fri, 15 May 2015 02:23:27 +0000 (19:23 -0700)]
arm: xlnx-ep108: Add external RAM
Zynq MPSoC supports external DDR RAM. Add a RAM at 0 to the model.
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id:
2c25e2a4198402a6477aef2975d5df7c415dd341.
1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Crosthwaite [Fri, 15 May 2015 02:23:24 +0000 (19:23 -0700)]
arm: Add xlnx-ep108 machine
Add a machine model for the Xilinx ZynqMP SoC EP108 board.
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id:
3896b34c862f370dc0679e4428bf3848d1f9f83c.
1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Crosthwaite [Fri, 15 May 2015 02:23:21 +0000 (19:23 -0700)]
arm: xlnx-zynqmp: Add UART support
There are 2x Cadence UARTs in Zynq MP. Add them.
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id:
e30795536f77599fabc1052278d846ccd52322e2.
1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Crosthwaite [Fri, 15 May 2015 02:23:18 +0000 (19:23 -0700)]
char: cadence_uart: Split state struct and type into header
Create a new header for Cadence UART to allow using the device with
modern SoC programming conventions. The state struct needs to be
visible to embed the device in SoC containers.
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id:
46a0fbd45b6b205f54c4a8c778deb75c77f8abdf.
1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Crosthwaite [Fri, 15 May 2015 02:23:15 +0000 (19:23 -0700)]
char: cadence_uart: Clean up variable names
Clean up some variable names in preparation for migrating the state struct
and type cast macro to a public header. The acronym "UART" on it's own is
not specific enough to be used in a more global namespace so preface with
"cadence". Fix the capitalisation of "uart" in the state type while touching
the typename. Preface macros used by the state struct itself with CADENCE_UART
so they don't conflict in namespace either.
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id:
3812b7426c338beae9e082557f3524a99310ddc6.
1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Crosthwaite [Fri, 15 May 2015 02:23:12 +0000 (19:23 -0700)]
arm: xlnx-zynqmp: Add GEM support
There are 4x Cadence GEMs in ZynqMP. Add them.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id:
7d3e68e5495d145255f0ee567046415e3a26d67e.
1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Crosthwaite [Fri, 15 May 2015 02:23:09 +0000 (19:23 -0700)]
net: cadence_gem: Split state struct and type into header
Create a new header for Cadence GEM to allow using the device with
modern SoC programming conventions. The state struct needs to be
visible to embed the device in SoC containers.
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id:
a98b5df6440c5bff8f813a26bb53ce1cfefb4c4c.
1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Crosthwaite [Fri, 15 May 2015 02:23:07 +0000 (19:23 -0700)]
net: cadence_gem: Clean up variable names
Cleanup some variable names in preparation for migrating the state
struct and type cast macro to a public header. The acronym "GEM" on
its own is not specific enough to be used in a more global namespace
so preface with "cadence". Fix the capitalisation of "gem" in the
state type while touching the typename. Also preface the GEM_MAXREG
macro as this will need to migrate to public header.
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id:
8e2b0687b3a7b7a3fde5ba2f3bee6f3b911e84ef.
1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Crosthwaite [Fri, 15 May 2015 02:23:04 +0000 (19:23 -0700)]
arm: xlnx-zynqmp: Connect CPU Timers to GIC
Connect the GPIO outputs from the individual CPUs for the timers to the
GIC.
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id:
a7866a4f0c903c91fa3034210b4d2879aa4bfcb9.
1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Crosthwaite [Fri, 15 May 2015 02:23:01 +0000 (19:23 -0700)]
arm: xlnx-zynqmp: Add GIC
Add the GIC and connect IRQ outputs to the CPUs. The GIC regions are
under-decoded through a 64k address region so implement aliases
accordingly.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id:
5853189965728d676106d9e94e76b9bb87981cb5.
1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Crosthwaite [Fri, 15 May 2015 02:22:58 +0000 (19:22 -0700)]
arm: Introduce Xilinx ZynqMP SoC
With quad Cortex-A53 CPUs.
Use SMC PSCI, with the standard policy of secondaries starting in
power-off.
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id:
a16202a6c7b79e446e5289d38cb18d2ee4b897a0.
1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Crosthwaite [Fri, 15 May 2015 02:22:55 +0000 (19:22 -0700)]
target-arm: cpu64: Add support for Cortex-A53
Add the ARM Cortex-A53 processor definition. Similar to A57, but with
different L1 I cache policy, phys addr size and different cache
geometries. The cache sizes is implementation configurable, but use
these values (from Xilinx Zynq MPSoC) as a default until cache size
configurability is added.
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id:
db439ff834cf0431bc192b05272a3b28fe2045d0.
1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Crosthwaite [Fri, 15 May 2015 02:22:52 +0000 (19:22 -0700)]
target-arm: cpu64: generalise name of A57 regs
Rename some A57 CP register variables in preparation for support for
Cortex A53. Use "a57_a53" to describe the shareable features. Some of
the CP15 registers (such as ACTLR) are specific to implementation, but
we currently just RAZ them so continue with that as the policy for both
A57 and A53 processors under a shared definition.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id:
5a5f957994677d91435190b3be1cefa6f657e274.
1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 15 May 2015 16:51:20 +0000 (17:51 +0100)]
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2015-05-15' into staging
qapi: Fix qapi mangling of downstream names, and more
# gpg: Signature made Fri May 15 17:41:31 2015 BST using RSA key ID
EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
* remotes/armbru/tags/pull-qapi-2015-05-15: (26 commits)
qapi: Inline gen_command_decl_prologue(), gen_command_def_prologue()
qapi: Drop pointless flush() before close()
qapi: Factor open_output(), close_output() out of generators
qapi: Turn generators' mandatory option -i into an argument
qapi: Fix generators to report command line errors decently
qapi: Factor parse_command_line() out of the generators
qapi: qapi-commands.py option --type is unused, drop it
qapi: qapi-event.py option -b does nothing, drop it
tests: Add missing dependencies on $(qapi-py)
qapi: Support downstream events and commands
qapi: Support downstream alternates
qapi: Support downstream flat unions
qapi: Support downstream simple unions
qapi: Support downstream structs
qapi: Support downstream enums
qapi: Make c_type() consistently convert qapi names
qapi: Tidy c_type() logic
qapi: Move camel_to_upper(), c_enum_const() to closely related code
qapi: Use c_enum_const() in generate_alternate_qtypes()
qapi: Simplify c_enum_const()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 15 May 2015 15:02:08 +0000 (16:02 +0100)]
Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-
20150514' into staging
Per-memop alignment
# gpg: Signature made Thu May 14 20:17:27 2015 BST using RSA key ID
4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg: aka "Richard Henderson <rth@redhat.com>"
# gpg: aka "Richard Henderson <rth@twiddle.net>"
* remotes/rth/tags/pull-tcg-
20150514:
tcg: Add MO_ALIGN, MO_UNALN
tcg: Push merged memop+mmu_idx parameter to softmmu routines
tcg: Merge memop and mmu_idx parameters to qemu_ld/st
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 13 May 2015 18:25:20 +0000 (11:25 -0700)]
tcg: Add MO_ALIGN, MO_UNALN
These modifiers control, on a per-memory-op basis, whether
unaligned memory accesses are allowed. The default setting
reflects the target's definition of ALIGNED_ONLY.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Wed, 13 May 2015 16:10:33 +0000 (09:10 -0700)]
tcg: Push merged memop+mmu_idx parameter to softmmu routines
The extra information is not yet used but it is now available.
This requires minor changes through all of the tcg backends.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Tue, 12 May 2015 18:51:44 +0000 (11:51 -0700)]
tcg: Merge memop and mmu_idx parameters to qemu_ld/st
At the tcg opcode level, not at the tcg-op.h generator level.
This requires minor changes through all of the tcg backends,
but none of the cpu translators.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Markus Armbruster [Thu, 2 Apr 2015 12:52:55 +0000 (14:52 +0200)]
qapi: Inline gen_command_decl_prologue(), gen_command_def_prologue()
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Markus Armbruster [Thu, 2 Apr 2015 12:49:29 +0000 (14:49 +0200)]
qapi: Drop pointless flush() before close()
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Markus Armbruster [Thu, 2 Apr 2015 12:46:39 +0000 (14:46 +0200)]
qapi: Factor open_output(), close_output() out of generators
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Markus Armbruster [Thu, 2 Apr 2015 11:32:16 +0000 (13:32 +0200)]
qapi: Turn generators' mandatory option -i into an argument
Mandatory option is silly, and the error handling is missing: the
programs crash when -i isn't supplied. Make it an argument, and check
it properly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Markus Armbruster [Thu, 2 Apr 2015 11:17:34 +0000 (13:17 +0200)]
qapi: Fix generators to report command line errors decently
Report to stderr, prefix with the program name. Also reject
extra arguments.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Markus Armbruster [Thu, 2 Apr 2015 11:12:21 +0000 (13:12 +0200)]
qapi: Factor parse_command_line() out of the generators
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Markus Armbruster [Thu, 2 Apr 2015 09:41:22 +0000 (11:41 +0200)]
qapi: qapi-commands.py option --type is unused, drop it
Anything but --type sync (which is the default) suppresses output
entirely, which makes no sense.
Dates back to the initial commit
c17d990. Commit message says
"Currently only generators for synchronous qapi/qmp functions are
supported", so maybe output other than "synchronous qapi/qmp" was
planned at the time, to be selected with --type.
Should other kinds of output ever materialize, we can put the option
back.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Markus Armbruster [Thu, 2 Apr 2015 09:40:21 +0000 (11:40 +0200)]
qapi: qapi-event.py option -b does nothing, drop it
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Markus Armbruster [Thu, 2 Apr 2015 11:38:48 +0000 (13:38 +0200)]
tests: Add missing dependencies on $(qapi-py)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Eric Blake [Thu, 14 May 2015 12:51:01 +0000 (06:51 -0600)]
qapi: Support downstream events and commands
Enhance the testsuite to cover downstream events and commands.
Events worked without more tweaks, but commands needed a few final
updates in the generator to mangle names in the appropriate places.
In making those tweaks, it was easier to drop type_visitor() and
inline its actions instead.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Eric Blake [Thu, 14 May 2015 12:51:00 +0000 (06:51 -0600)]
qapi: Support downstream alternates
Enhance the testsuite to cover downstream alternates, including
whether the branch name or type is downstream. Update the
generator to mangle alternate names in the appropriate places.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Eric Blake [Thu, 14 May 2015 12:50:59 +0000 (06:50 -0600)]
qapi: Support downstream flat unions
Enhance the testsuite to cover downstream flat unions, including
the base type, discriminator name and type, and branch name and
type. Update the generator to mangle the union names in the
appropriate places.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Eric Blake [Thu, 14 May 2015 12:50:58 +0000 (06:50 -0600)]
qapi: Support downstream simple unions
Enhance the testsuite to cover downstream simple unions, including
when a union branch is a downstream name. Update the generator to
mangle the union names in the appropriate places.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Eric Blake [Thu, 14 May 2015 12:50:57 +0000 (06:50 -0600)]
qapi: Support downstream structs
Enhance the testsuite to cover downstream structs, including struct
members and base structs. Update the generator to mangle the
struct names in the appropriate places.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Eric Blake [Thu, 14 May 2015 12:50:56 +0000 (06:50 -0600)]
qapi: Support downstream enums
Enhance the testsuite to cover a downstream enum type and enum
string. Update the generator to mangle the enum name in the
appropriate places.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Eric Blake [Thu, 14 May 2015 12:50:55 +0000 (06:50 -0600)]
qapi: Make c_type() consistently convert qapi names
Continuing the string of cleanups for supporting downstream names
containing '.', this patch focuses on ensuring c_type() can
handle a downstream name. This patch alone does not fix the
places where generator output should be calling this function
but was open-coding things instead, but it gets us a step closer.
In particular, the changes to c_list_type() and type_name() mean
that type_name(FOO) now handles the case when FOO contains '.',
'-', or is a ticklish identifier other than a builtin (builtins
are exempted because ['int'] must remain mapped to 'intList' and
not 'q_intList'). Meanwhile, ['unix'] now maps to 'q_unixList'
rather than 'unixList', to match the fact that 'unix' is ticklish;
however, our naming conventions state that complex types should
start with a capital, so no type name following conventions will
ever have the 'q_' prepended.
Likewise, changes to c_type() mean that c_type(FOO) properly
handles an enum or complex type FOO with '.' or '-' in the
name, or is a ticklish identifier (again, a ticklish identifier
as a type name violates conventions).
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Eric Blake [Thu, 14 May 2015 12:50:54 +0000 (06:50 -0600)]
qapi: Tidy c_type() logic
c_type() is designed to be called on both string names and on
array designations, so 'name' is a bit misleading because it
operates on more than strings. Also, no caller ever passes
an empty string. Finally, + notation is a bit nicer to read
than '%s' % value for string concatenation.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Markus Armbruster [Thu, 14 May 2015 12:50:53 +0000 (06:50 -0600)]
qapi: Move camel_to_upper(), c_enum_const() to closely related code
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Markus Armbruster [Thu, 14 May 2015 12:50:52 +0000 (06:50 -0600)]
qapi: Use c_enum_const() in generate_alternate_qtypes()
Missed in commit
b0b5819.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Markus Armbruster [Thu, 14 May 2015 12:50:51 +0000 (06:50 -0600)]
qapi: Simplify c_enum_const()
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Markus Armbruster [Thu, 14 May 2015 12:50:50 +0000 (06:50 -0600)]
qapi: Rename generate_enum_full_value() to c_enum_const()
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Markus Armbruster [Thu, 14 May 2015 12:50:49 +0000 (06:50 -0600)]
qapi: Rename _generate_enum_string() to camel_to_upper()
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Eric Blake [Thu, 14 May 2015 12:50:48 +0000 (06:50 -0600)]
qapi: Rename identical c_fun()/c_var() into c_name()
Now that the two functions are identical, we only need one of them,
and we might as well give it a more descriptive name. Basically,
the function serves as the translation from a QAPI name into a
(portion of a) C identifier, without regards to whether it is a
variable or function name.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Markus Armbruster [Thu, 14 May 2015 12:50:47 +0000 (06:50 -0600)]
qapi: Fix C identifiers generated for names containing '.'
c_fun() maps '.' to '_', c_var() doesn't. Nothing prevents '.' in
QAPI names that get passed to c_var().
Which QAPI names get passed to c_fun(), to c_var(), or to both is not
obvious. Names of command parameters and struct type members get
passed to c_var().
c_var() strips a leading '*', but this cannot happen. c_fun()
doesn't.
Fix c_var() to work exactly like c_fun().
Perhaps they should be replaced by a single mapping function.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[add 'import string']
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>