Merge remote-tracking branch 'remotes/rth/tags/pull-tile-20150915' into staging

TileGX basic instructions

# gpg: Signature made Tue 15 Sep 2015 15:57:08 BST using RSA key ID 4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg:                 aka "Richard Henderson <rth@redhat.com>"
# gpg:                 aka "Richard Henderson <rth@twiddle.net>"

* remotes/rth/tags/pull-tile-20150915: (35 commits)
  target-tilegx: Handle v1shl, v1shru, v1shrs
  target-tilegx: Handle v1shli, v1shrui
  target-tilegx: Handle v4int_l/h
  target-tilegx: Handle atomic instructions
  target-tilegx: Handle mtspr, mfspr
  target-tilegx: Handle v1cmpeq, v1cmpne
  target-tilegx: Handle mask instructions
  target-tilegx: Handle scalar multiply instructions
  target-tilegx: Handle conditional move instructions
  target-tilegx: Handle shift instructions
  target-tilegx: Handle bitfield instructions
  target-tilegx: Implement system and memory management instructions
  target-tilegx: Handle comparison instructions
  target-tilegx: Handle conditional branch instructions
  target-tilegx: Handle unconditional jump instructions
  target-tilegx: Handle post-increment load and store instructions
  target-tilegx: Handle basic load and store instructions
  target-tilegx: Handle most bit manipulation instructions
  target-arm: Use new revbit functions
  host-utils: Add revbit functions
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-tilegx: Handle v1shl, v1shru, v1shrs

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target-tilegx: Handle v1shli, v1shrui

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target-tilegx: Handle v4int_l/h

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target-tilegx: Handle atomic instructions

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target-tilegx: Handle mtspr, mfspr

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target-tilegx: Handle v1cmpeq, v1cmpne

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target-tilegx: Handle mask instructions

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target-tilegx: Handle scalar multiply instructions

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target-tilegx: Handle conditional move instructions

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target-tilegx: Handle shift instructions

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target-tilegx: Handle bitfield instructions

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target-tilegx: Implement system and memory management instructions

Most of which are either nops or exceptions.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target-tilegx: Handle comparison instructions

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target-tilegx: Handle conditional branch instructions

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target-tilegx: Handle unconditional jump instructions

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target-tilegx: Handle post-increment load and store instructions

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target-tilegx: Handle basic load and store instructions

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target-tilegx: Handle most bit manipulation instructions

The crc instructions are omitted from this set.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target-arm: Use new revbit functions

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>

host-utils: Add revbit functions

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target-tilegx: Handle arithmetic instructions

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target-tilegx: Handle simple logical operations

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target-tilegx: Add TILE-Gx building files

Add related configuration and make files for tilegx.
The target can now build, though not run anything.

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <BLU436-SMTP1588E5A03AD5E94B07E988B9660@phx.gbl>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target-tilegx: Generate SEGV properly

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>

Merge remote-tracking branch 'remotes/berrange/tags/vnc-crypto-v9-for-upstream' into staging

Merge vnc-crypto-v9

# gpg: Signature made Tue 15 Sep 2015 15:32:38 BST using RSA key ID 15104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg:                 aka "Daniel P. Berrange <berrange@redhat.com>"

* remotes/berrange/tags/vnc-crypto-v9-for-upstream:
  ui: convert VNC server to use QCryptoTLSSession
  ui: fix return type for VNC I/O functions to be ssize_t
  crypto: introduce new module for handling TLS sessions
  crypto: add sanity checking of TLS x509 credentials
  crypto: introduce new module for TLS x509 credentials
  crypto: introduce new module for TLS anonymous credentials
  crypto: introduce new base module for TLS credentials
  qom: allow QOM to be linked into tools binaries
  crypto: move crypto objects out of libqemuutil.la
  tests: remove repetition in unit test object deps
  qapi: allow override of default enum prefix naming

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-tilegx: Framework for decoding bundles

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target-tilegx: Add several helpers for instructions translation

The related instructions are exception, cntlz, cnttz, shufflebytes.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Message-Id: <BLU436-SMTP83F96FD8422BE49AFDC9DFB9660@phx.gbl>
[rth: Remove incorrect implementation of add_saturate.]
Signed-off-by: Richard Henderson <rth@twiddle.net>

target-tilegx: Add cpu basic features for linux-user

It implements minimized cpu features for linux-user.

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <BLU436-SMTP114819BB03D853801AA9C3CB9660@phx.gbl>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target-tilegx: Add special register information from Tilera Corporation

The related copy is from Linux kernel "arch/tile/include/uapi/arch/
spr_def_64.h".

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <BLU436-SMTP1093D605AAE9B4837B564B8B9660@phx.gbl>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target-tilegx: Fix LDNA_ADD_IMM8_OPCODE_X1

An obvious typo in the mnemonic here.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target-tilegx: Modify _SPECIAL_ opcodes

Both ADDX_SPECIAL_0_OPCODE_Y1 and ADD_SPECIAL_0_OPCODE_Y1
do not appear to be "special" in any way, except that they
don't follow the normal naming convention using _RRR_.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target-tilegx: Modify opcode_tilegx.h to fit QEMU usage

Use 'inline' instead of '__inline', and also use 'uint64_t' instead of
"unsigned long long"

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <BLU436-SMTP1945B04384351D5EE7D9DECB9660@phx.gbl>
Signed-off-by: Richard Henderson <rth@twiddle.net>

target-tilegx: Add opcode basic implementation from Tilera Corporation

It is copied from Linux kernel "arch/tile/include/uapi/arch/
opcode_tilegx.h".

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <BLU436-SMTP2087FA98B64A20B25155D9AB9660@phx.gbl>
Signed-off-by: Richard Henderson <rth@twiddle.net>

linux-user: Conditionalize syscalls which are not defined in tilegx

Some of architectures (e.g. tilegx), several syscall macros are not
supported, so switch them.

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <BLU436-SMTP457D6FC9B2B9BA87AEB22CB9660@phx.gbl>
Signed-off-by: Richard Henderson <rth@twiddle.net>

linux-user: Support tilegx architecture in linux-user

Add main working flow feature, system call processing feature, and elf64
tilegx binary loading feature, based on Linux kernel tilegx 64-bit
implementation.

[rth: Moved all of the implementation of atomic instructions to a later patch.]

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <BLU436-SMTP938552D42808AA60634582B9660@phx.gbl>
Signed-off-by: Richard Henderson <rth@twiddle.net>

ui: convert VNC server to use QCryptoTLSSession

Switch VNC server over to using the QCryptoTLSSession object
for the TLS session. This removes the direct use of gnutls
from the VNC server code. It also removes most knowledge
about TLS certificate handling from the VNC server code.
This has the nice effect that all the CONFIG_VNC_TLS
conditionals go away and the user gets an actual error
message when requesting TLS instead of it being silently
ignored.

With this change, the existing configuration options for
enabling TLS with -vnc are deprecated.

Old syntax for anon-DH credentials:

  -vnc hostname:0,tls

New syntax:

  -object tls-creds-anon,id=tls0,endpoint=server \
  -vnc hostname:0,tls-creds=tls0

Old syntax for x509 credentials, no client certs:

  -vnc hostname:0,tls,x509=/path/to/certs

New syntax:

  -object tls-creds-x509,id=tls0,dir=/path/to/certs,endpoint=server,verify-peer=no \
  -vnc hostname:0,tls-creds=tls0

Old syntax for x509 credentials, requiring client certs:

  -vnc hostname:0,tls,x509verify=/path/to/certs

New syntax:

  -object tls-creds-x509,id=tls0,dir=/path/to/certs,endpoint=server,verify-peer=yes \
  -vnc hostname:0,tls-creds=tls0

This aligns VNC with the way TLS credentials are to be
configured in the future for chardev, nbd and migration
backends. It also has the benefit that the same TLS
credentials can be shared across multiple VNC server
instances, if desired.

If someone uses the deprecated syntax, it will internally
result in the creation of a 'tls-creds' object with an ID
based on the VNC server ID. This allows backwards compat
with the CLI syntax, while still deleting all the original
TLS code from the VNC server.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>

linux-user: tilegx: Add architecture related features

They are based on Linux kernel tilegx architecture for 64 bit binary,
and also based on tilegx ABI reference document, and also reference from
other targets implementations.

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <BLU436-SMTP2508945F92945BB525605A3B9660@phx.gbl>
Signed-off-by: Richard Henderson <rth@twiddle.net>

ui: fix return type for VNC I/O functions to be ssize_t

Various VNC server I/O functions return 'long' and then
also pass this to a method accepting 'int'. All these
should be ssize_t to match the signature of read/write
APIs and thus avoid potential for integer truncation /
wraparound.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>

crypto: introduce new module for handling TLS sessions

Introduce a QCryptoTLSSession object that will encapsulate
all the code for setting up and using a client/sever TLS
session. This isolates the code which depends on the gnutls
library, avoiding #ifdefs in the rest of the codebase, as
well as facilitating any possible future port to other TLS
libraries, if desired. It makes use of the previously
defined QCryptoTLSCreds object to access credentials to
use with the session. It also includes further unit tests
to validate the correctness of the TLS session handshake
and certificate validation. This is functionally equivalent
to the current TLS session handling code embedded in the
VNC server, and will obsolete it.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>

crypto: add sanity checking of TLS x509 credentials

If the administrator incorrectly sets up their x509 certificates,
the errors seen at runtime during connection attempts are very
obscure and difficult to diagnose. This has been a particular
problem for people using openssl to generate their certificates
instead of the gnutls certtool, because the openssl tools don't
turn on the various x509 extensions that gnutls expects to be
present by default.

This change thus adds support in the TLS credentials object to
sanity check the certificates when QEMU first loads them. This
gives the administrator immediate feedback for the majority of
common configuration mistakes, reducing the pain involved in
setting up TLS. The code is derived from equivalent code that
has been part of libvirt's TLS support and has been seen to be
valuable in assisting admins.

It is possible to disable the sanity checking, however, via
the new 'sanity-check' property on the tls-creds object type,
with a value of 'no'.

Unit tests are included in this change to verify the correctness
of the sanity checking code in all the key scenarios it is
intended to cope with. As part of the test suite, the pkix_asn1_tab.c
from gnutls is imported. This file is intentionally copied from the
(long since obsolete) gnutls 1.6.3 source tree, since that version
was still under GPLv2+, rather than the GPLv3+ of gnutls >= 2.0.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>

crypto: introduce new module for TLS x509 credentials

Introduce a QCryptoTLSCredsX509 class which is used to
manage x509 certificate TLS credentials. This will be
the preferred credential type offering strong security
characteristics

Example CLI configuration:

 $QEMU -object tls-creds-x509,id=tls0,endpoint=server,\
               dir=/path/to/creds/dir,verify-peer=yes

The 'id' value in the -object args will be used to associate the
credentials with the network services. For example, when the VNC
server is later converted it would use

 $QEMU -object tls-creds-x509,id=tls0,.... \
       -vnc 127.0.0.1:1,tls-creds=tls0

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>

crypto: introduce new module for TLS anonymous credentials

Introduce a QCryptoTLSCredsAnon class which is used to
manage anonymous TLS credentials. Use of this class is
generally discouraged since it does not offer strong
security, but it is required for backwards compatibility
with the current VNC server implementation.

Simple example CLI configuration:

 $QEMU -object tls-creds-anon,id=tls0,endpoint=server

Example using pre-created diffie-hellman parameters

 $QEMU -object tls-creds-anon,id=tls0,endpoint=server,\
               dir=/path/to/creds/dir

The 'id' value in the -object args will be used to associate the
credentials with the network services. For example, when the VNC
server is later converted it would use

 $QEMU -object tls-creds-anon,id=tls0,.... \
       -vnc 127.0.0.1:1,tls-creds=tls0

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>

crypto: introduce new base module for TLS credentials

Introduce a QCryptoTLSCreds class to act as the base class for
storing TLS credentials. This will be later subclassed to provide
handling of anonymous and x509 credential types. The subclasses
will be user creatable objects, so instances can be created &
deleted via 'object-add' and 'object-del' QMP commands respectively,
or via the -object command line arg.

If the credentials cannot be initialized an error will be reported
as a QMP reply, or on stderr respectively.

The idea is to make it possible to represent and manage TLS
credentials independently of the network service that is using
them. This will enable multiple services to use the same set of
credentials and minimize code duplication. A later patch will
convert the current VNC server TLS code over to use this object.

The representation of credentials will be functionally equivalent
to that currently implemented in the VNC server with one exception.
The new code has the ability to (optionally) load a pre-generated
set of diffie-hellman parameters, if the file dh-params.pem exists,
whereas the current VNC server will always generate them on startup.
This is beneficial for admins who wish to avoid the (small) time
sink of generating DH parameters at startup and/or avoid depleting
entropy.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>

qom: allow QOM to be linked into tools binaries

The qom objects are currently added to common-obj-y
which is only linked into the system emulators. The
later crypto patches will depend on QOM infrastructure
and will also be used from tools binaries. Thus the QOM
objects are moved into a new qom-obj-y variable which
can be referenced when linking tools, system emulators
and tests.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>

crypto: move crypto objects out of libqemuutil.la

Future patches will be adding more crypto related APIs which
rely on QOM infrastructure. This creates a problem, because
QOM relies on library constructors to register objects. When
you have a file in a static .a library though which is only
referenced by a constructor the linker is dumb and will drop
that file when linking to the final executable :-( The only
workaround for this is to link the .a library to the executable
using the -Wl,--whole-archive flag, but this creates its own
set of problems because QEMU is relying on lazy linking for
libqemuutil.a. Using --whole-archive majorly increases the
size of final executables as they now contain a bunch of
object code they don't actually use.

The least bad option is to thus not include the crypto objects
in libqemuutil.la, and instead define a crypto-obj-y variable
that is referenced directly by all the executables that need
this code (tools + softmmu, but not qemu-ga). We avoid pulling
entire of crypto-obj-y into the userspace emulators as that
would force them to link to gnutls too, which is not required.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>

Merge remote-tracking branch 'remotes/kraxel/tags/pull-gtk-20150915-1' into staging

gtk: misc grab tweaks, locale fix.

# gpg: Signature made Tue 15 Sep 2015 11:35:36 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-gtk-20150915-1:
  gtk: use setlocale() for LC_MESSAGES only
  gtk: don't grab input when entering fullscreen.
  gtk: set free_scale when setting zoom_fit
  gtk: trace input grab reason
  gtk: move gd_update_caption calls to gd_{grab,ungrab}_{pointer,keyboard}
  gtk: check for existing grabs in gd_grab_{pointer,keyboard}

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/stefanha/tags/net-pull-request' into staging

This net pull request contains security fixes for qemu.git/master.  The patches
should also be applied to stable trees.

The ne2000 NIC model has QEMU memory corruption issue.  Both ne2000 and e1000
have an infinite loop.

Please see the patches for CVE numbers and details on the bugs.

# gpg: Signature made Tue 15 Sep 2015 13:02:21 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/net-pull-request:
  net: avoid infinite loop when receiving packets(CVE-2015-5278)
  net: add checks to validate ring buffer pointers(CVE-2015-5279)
  e1000: Avoid infinite loop in processing transmit descriptor (CVE-2015-6815)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

net: avoid infinite loop when receiving packets(CVE-2015-5278)

Ne2000 NIC uses ring buffer of NE2000_MEM_SIZE(49152)
bytes to process network packets. While receiving packets
via ne2000_receive() routine, a local 'index' variable
could exceed the ring buffer size, leading to an infinite
loop situation.

Reported-by: Qinghao Tang <luodalongde@gmail.com>
Signed-off-by: P J P <pjp@fedoraproject.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

net: add checks to validate ring buffer pointers(CVE-2015-5279)

Ne2000 NIC uses ring buffer of NE2000_MEM_SIZE(49152)
bytes to process network packets. While receiving packets
via ne2000_receive() routine, a local 'index' variable
could exceed the ring buffer size, which could lead to a
memory buffer overflow. Added other checks at initialisation.

Reported-by: Qinghao Tang <luodalongde@gmail.com>
Signed-off-by: P J P <pjp@fedoraproject.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

e1000: Avoid infinite loop in processing transmit descriptor (CVE-2015-6815)

While processing transmit descriptors, it could lead to an infinite
loop if 'bytes' was to become zero; Add a check to avoid it.

[The guest can force 'bytes' to 0 by setting the hdr_len and mss
descriptor fields to 0.
--Stefan]

Signed-off-by: P J P <pjp@fedoraproject.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 1441383666-6590-1-git-send-email-stefanha@redhat.com

gtk: use setlocale() for LC_MESSAGES only

The QEMU code is not internationalized and assumes that it runs under
the C locale, but if we use the GTK+ UI we'll end up importing the
locale settings from the environment. This can break things, such as
the JSON generator and iotest 120 in locales that use a decimal comma.

We do however have translations for a few simple strings for the GTK+
menu items, so in order to run QEMU using the C locale, and yet have a
translated UI let's use setlocale() for LC_MESSAGES only.

Cc: qemu-stable@nongnu.org
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

gtk: don't grab input when entering fullscreen.

Kick off all grabbing logic from fullscreen mode.  In the current state
it seems to create more problems than it solves.  Try running qemu/gtk
fullscreen on one head of a multihead host for example ...

There probably was a reason the grab-on-fullscreen logic was added in
the first place.  So please test and report any issues so we can try to
find a sane way to handle it.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>

gtk: set free_scale when setting zoom_fit

free_scale field tracks zoom-fit menu toggle state,
so we should keep them in sync ...

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>

gtk: trace input grab reason

Add a reason to grab calls and trace points,
so it is easier to debug grab related ui issues.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>

gtk: move gd_update_caption calls to gd_{grab,ungrab}_{pointer,keyboard}

Then we don't have to pair the grab/ungrab calls with update_caption
calls any more because things happen automatically ;)

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>

gtk: check for existing grabs in gd_grab_{pointer,keyboard}

If a grab is already active for our window, do nothing.
If a grab is already active for another window, release it.

Cleanup some checks and ungrab calls in the code which are
not needed any more.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>

tests: remove repetition in unit test object deps

Most of the unit tests have identical sets of object deps.
For example all block unit tests need to depend on

 $(block-obj-y) libqemuutil.a libqemustub.a

Currently each unit test repeats this list of test deps.
This list of deps will grow as future patches add more
modules to the build, so define some common variables
that can be used by all unit tests to remove the
repetition.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>

qapi: allow override of default enum prefix naming

The camel_to_upper() method applies some heuristics to turn
a mixed case type name into an all-uppercase name. This is
used for example, to generate enum constant name prefixes.

The heuristics don't also generate a satisfactory name
though. eg

  { 'enum': 'QCryptoTLSCredsEndpoint',
    'data': ['client', 'server']}

Results in Q_CRYPTOTLS_CREDS_ENDPOINT_CLIENT. This has
an undesirable _ after the initial Q and is missing an
_ between the CRYPTO & TLS strings.

Rather than try to add more and more heuristics to try
to cope with this, simply allow the QAPI schema to
specify the desired enum constant prefix explicitly.

eg

  { 'enum': 'QCryptoTLSCredsEndpoint',
    'prefix': 'QCRYPTO_TLS_CREDS_ENDPOINT',
    'data': ['client', 'server']}

Now gives the QCRYPTO_TLS_CREDS_ENDPOINT_CLIENT name.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches (v2)

# gpg: Signature made Mon 14 Sep 2015 15:56:54 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"

* remotes/kevin/tags/for-upstream: (23 commits)
  qcow2: Make qcow2_alloc_bytes() more explicit
  vmdk: Fix next_cluster_sector for compressed write
  iotests: Add test for checking large image files
  qcow2: Make size_to_clusters() return uint64_t
  qemu-iotests: More qcow2 reopen tests
  qemu-iotests: Reopen qcow2 with lazy-refcounts change
  qcow2: Support updating driver-specific options in reopen
  qcow2: Make qcow2_update_options() suitable for transactions
  qcow2: Fix memory leak in qcow2_update_options() error path
  qcow2: Leave s unchanged on qcow2_update_options() failure
  qcow2: Move rest of option handling to qcow2_update_options()
  qcow2: Move qcow2_update_options() call up
  qcow2: Factor out qcow2_update_options()
  qcow2: Improve error message
  qemu-io: Add command 'reopen'
  qemu-io: Remove duplicate 'open' error message
  block: Allow specifying driver-specific options to reopen
  qcow2: Rename BDRVQcowState to BDRVQcow2State
  block: Drop bdrv_find_whitelisted_format()
  block: Drop drv parameter from bdrv_fill_options()
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

qapi: Fix cgen() for Python older than 2.7

A feature new in Python 2.7 crept into commit 77e703b: re.subn()'s
fifth argument.  Avoid that, use re.compile().

Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 1441640755-23902-1-git-send-email-armbru@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Support for jemalloc
* qemu_mutex_lock_iothread "No such process" fix
* cutils: qemu_strto* wrappers
* iohandler.c simplification
* Many other fixes and misc patches.

And some MTTCG work (with Emilio's fixes squashed):
* Signal-free TCG kick
* Removing spinlock in favor of QemuMutex
* User-mode emulation multi-threading fixes/docs

# gpg: Signature made Thu 10 Sep 2015 09:03:07 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"

* remotes/bonzini/tags/for-upstream: (44 commits)
  cutils: work around platform differences in strto{l,ul,ll,ull}
  cpu-exec: fix lock hierarchy for user-mode emulation
  exec: make mmap_lock/mmap_unlock globally available
  tcg: comment on which functions have to be called with mmap_lock held
  tcg: add memory barriers in page_find_alloc accesses
  remove unused spinlock.
  replace spinlock by QemuMutex.
  cpus: remove tcg_halt_cond and tcg_cpu_thread globals
  cpus: protect work list with work_mutex
  scripts/dump-guest-memory.py: fix after RAMBlock change
  configure: Add support for jemalloc
  add macro file for coccinelle
  configure: factor out adding disas configure
  vhost-scsi: fix wrong vhost-scsi firmware path
  checkpatch: remove tests that are not relevant outside the kernel
  checkpatch: adapt some tests to QEMU
  CODING_STYLE: update mixed declaration rules
  qmp: Add example usage of strto*l() qemu wrapper
  cutils: Add qemu_strtoull() wrapper
  cutils: Add qemu_strtoll() wrapper
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

qcow2: Make qcow2_alloc_bytes() more explicit

In case of -EAGAIN returned by update_refcount(), we should discard the
cluster offset we were trying to allocate and request a new one, because
in theory that old offset might now be taken by a refcount block.

In practice, this was not the case due to update_refcount() generally
returning strictly monotonic increasing cluster offsets. However, this
behavior is not set in stone, and it is also not obvious when looking at
qcow2_alloc_bytes() alone, so we should not rely on it.

Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

vmdk: Fix next_cluster_sector for compressed write

When the VMDK is streamOptimized (or compressed), the
next_cluster_sector must not be incremented by a fixed number of
sectors. Instead of this, it must be rounded up to the next consecutive
sector. Fixing this results in much smaller compressed images.

Signed-off-by: Radoslav Gerganov <rgerganov@vmware.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

iotests: Add test for checking large image files

Add a test for checking a qcow2 file with a multiple of 2^32 clusters.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

qcow2: Make size_to_clusters() return uint64_t

Sadly, some images may have more clusters than what can be represented
using a plain int. We should be prepared for that case (in
qcow2_check_refcounts() we actually were trying to catch that case, but
since size_to_clusters() truncated the returned value, that check never
did anything useful).

Cc: qemu-stable <qemu-stable@nongnu.org>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

qemu-iotests: More qcow2 reopen tests

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>

qemu-iotests: Reopen qcow2 with lazy-refcounts change

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>

qcow2: Support updating driver-specific options in reopen

For updating the cache sizes, disabling lazy refcounts and updating the
clean_cache_timer there is a bit more to do than just changing the
variables, but otherwise we're all set for changing options during
bdrv_reopen().

Just implement the missing pieces and hook the functions up in
bdrv_reopen().

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>

qcow2: Make qcow2_update_options() suitable for transactions

Before we can allow updating options at runtime with bdrv_reopen(), we
need to split the function into prepare/commit/abort parts.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>

qcow2: Fix memory leak in qcow2_update_options() error path

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>

qcow2: Leave s unchanged on qcow2_update_options() failure

On return, either all new options should be applied to BDRVQcowState (on
success), or all of the old settings should be preserved (on failure).

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>

qcow2: Move rest of option handling to qcow2_update_options()

With this commit, the handling of driver-specific options in
qcow2_open() is completely separated out into qcow2_update_options().

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>

qcow2: Move qcow2_update_options() call up

qcow2_update_options() only updates some variables in BDRVQcowState and
doesn't really depend on other parts of it being initialised yet, so it
can be moved so that it immediately follows the other half of option
handling code in qcow2_open().

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>

qcow2: Factor out qcow2_update_options()

Eventually we want to be able to change options at runtime. As a first
step towards that goal, separate some option handling code from the
general initialisation code in qcow2_open().

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>

qcow2: Improve error message

Eric says that "any" sounds better than "either", and my non-native
feeling says the same, so let's change it.

Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>

qemu-io: Add command 'reopen'

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>

qemu-io: Remove duplicate 'open' error message

qemu_opts_parse_noisily() already prints an error message with the exact
reason why the parsing failed. No need to add another less specific one.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>

block: Allow specifying driver-specific options to reopen

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>

qcow2: Rename BDRVQcowState to BDRVQcow2State

BDRVQcowState is already used by qcow1, and gdb is always confused which
one to use. Rename the qcow2 one so they can be distinguished.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>

block: Drop bdrv_find_whitelisted_format()

It is unused by now, so we can drop it.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Drop drv parameter from bdrv_fill_options()

Now that this parameter is effectively unused, we can drop it and change
the function accordingly.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Drop drv parameter from bdrv_open_inherit()

Now that this parameter is effectively unused, we can drop it and just
pass NULL to bdrv_fill_options().

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Drop drv parameter from bdrv_open()

Now that this parameter is effectively unused, we can drop it and just
pass NULL on to bdrv_open_inherit().

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Always pass NULL as drv for bdrv_open()

Change all callers of bdrv_open() to pass the driver name in the options
QDict instead of passing its BlockDriver pointer.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20150914' into staging

target-arm queue:
 * fix GIC region size in xlnx-zynqmp
 * xlnx-zynqmp: Remove unnecessary brackets
 * improve A64 generated TCG code
 * add GPIO devices to i.MX25 and i.MX31
 * more missing pieces for EL2 support

# gpg: Signature made Mon 14 Sep 2015 14:51:12 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"

* remotes/pmaydell/tags/pull-target-arm-20150914: (24 commits)
  target-arm: Add VMPIDR_EL2
  target-arm: Break out mpidr_read_val()
  target-arm: Add VPIDR_EL2
  target-arm: Suppress EPD for S2, EL2 and EL3 translations
  target-arm: Suppress TBI for S2 translations
  target-arm: Add VTTBR_EL2
  target-arm: Add VTCR_EL2
  hw/cpu/{a15mpcore, a9mpcore}: Handle missing has_el3 CPU props gracefully
  i.MX: Add GPIO devices to i.MX25 SOC
  i.MX: Add GPIO devices to i.MX31 SOC
  i.MX: Add GPIO device
  target-arm: Use tcg_gen_extrh_i64_i32
  target-arm: Recognize ROR
  target-arm: Eliminate unnecessary zero-extend in disas_bitfield
  target-arm: Recognize UXTB, UXTH, LSR, LSL
  target-arm: Recognize SXTB, SXTH, SXTW, ASR
  target-arm: Implement fcsel with movcond
  target-arm: Implement ccmp branchless
  target-arm: Use setcond and movcond for csel
  target-arm: Handle always condition codes within arm_test_cc
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-arm: Add VMPIDR_EL2

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1442135278-25281-9-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-arm: Break out mpidr_read_val()

Break out mpidr_read_val() to allow future sharing of the
code that conditionally sets the M and U bits of MPIDR.

No functional changes.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1442135278-25281-8-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-arm: Add VPIDR_EL2

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1442135278-25281-7-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-arm: Suppress EPD for S2, EL2 and EL3 translations

Stage-2 translations, EL2 and EL3 regimes don't have the
EPD control.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1442135278-25281-6-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-arm: Suppress TBI for S2 translations

Stage-2 MMU translations do not have configurable TBI as
the top byte is always 0 (48-bit IPAs).

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1442135278-25281-5-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-arm: Add VTTBR_EL2

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1442135278-25281-4-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-arm: Add VTCR_EL2

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1442135278-25281-3-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: fixed typo in comment]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/cpu/{a15mpcore, a9mpcore}: Handle missing has_el3 CPU props gracefully

Handle missing CPU support for EL3 gracefully.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1442135278-25281-2-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

i.MX: Add GPIO devices to i.MX25 SOC

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 2eb129ba8713aedfe877eaa3d8de80061d880fbb.1441828793.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

i.MX: Add GPIO devices to i.MX31 SOC

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 60b67c9a8b948159f4b4163ead86fbf701c011c6.1441828793.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

i.MX: Add GPIO device

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 5ea3b0021e47cf7f7d883a7edbabee44980f3df7.1441828793.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-arm: Use tcg_gen_extrh_i64_i32

Usually, eliminate an operation from the translator by combining
a shift with an extract.

In the case of gen_set_NZ64, we don't need a boolean value for cpu_ZF,
merely a non-zero value.  Given that we can extract both halves of a
64-bit input in one call, this simplifies the code.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1441909103-24666-12-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-arm: Recognize ROR

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1441909103-24666-11-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-arm: Eliminate unnecessary zero-extend in disas_bitfield

For !SF, this initial ext32u can't be optimized away by the
current TCG code generator.  (It would require backward bit
liveness propagation.)

But since the range of bits for !SF are already constrained by
unallocated_encoding, we'll never reference the high bits anyway.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1441909103-24666-10-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>