OSDN Git Service
Manasi Navare [Thu, 8 Jun 2017 20:41:02 +0000 (13:41 -0700)]
drm/i915/dp: Generalize intel_dp_link_params function to accept arguments to be validated
This function now takes the link rate and lane ocunt to be validated
as an argument so that this can be used for validating even the
compliance test link parameters.
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com>
Tested-by: Nathan Ciobanu <nathan.d.ciobanu@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1496954463-18038-1-git-send-email-manasi.d.navare@intel.com
Daniel Vetter [Tue, 8 Aug 2017 08:08:28 +0000 (10:08 +0200)]
drm/i915: More surgically unbreak the modeset vs reset deadlock
There's no reason to entirely wedge the gpu, for the minimal deadlock
bugfix we only need to unbreak/decouple the atomic commit from the gpu
reset. The simplest way to fix that is by replacing the
unconditional fence wait a the top of commit_tail by a wait which
completes either when the fences are done (normal case, or when a
reset doesn't need to touch the display state). Or when the gpu reset
needs to force-unblock all pending modeset states.
The lesser source of deadlocks is when we try to pin a new framebuffer
and run into a stall. There's a bunch of places this can happen, like
eviction, changing the caching mode, acquiring a fence on older
platforms. And we can't just break the depency loop and keep going,
the only way would be to break out and restart. But the problem with
that approach is that we must stall for the reset to complete before
we grab any locks, and with the atomic infrastructure that's a bit
tricky. The only place is the ioctl code, and we don't want to insert
code into e.g. the BUSY ioctl. Hence for that problem just create a
critical section, and if any code is in there, wedge the GPU. For the
steady-state this should never be a problem.
Note that in both cases TDR itself keeps working, so from a userspace
pov this trickery isn't observable. Users themselvs might spot a short
glitch while the rendering is catching up again, but that's still
better than pre-TDR where we've thrown away all the rendering,
including innocent batches. Also, this fixes the regression TDR
introduced of making gpu resets deadlock-prone when we do need to
touch the display.
One thing I noticed is that gpu_error.flags seems to use both our own
wait-queue in gpu_error.wait_queue, and the generic wait_on_bit
facilities. Not entirely sure why this inconsistency exists, I just
picked one style.
A possible future avenue could be to insert the gpu reset in-between
ongoing modeset changes, which would avoid the momentary glitch. But
that's a lot more work to implement in the atomic commit machinery,
and given that we only need this for pre-g4x hw, of questionable
utility just for the sake of polishing gpu reset even more on those
old boxes. It might be useful for other features though.
v2: Rebase onto 4.13 with a s/wait_queue_t/struct wait_queue_entry/.
v3: Really emabarrassing fixup, I checked the wrong bit and broke the
unbreak/wakeup logic.
v4: Also handle deadlocks in pin_to_display.
v5: Review from Michel:
- Fixup the BUILD_BUG_ON
- Don't forget about the overlay
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> (v2)
Cc: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170808080828.23650-3-daniel.vetter@ffwll.ch
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Daniel Vetter [Tue, 8 Aug 2017 08:08:27 +0000 (10:08 +0200)]
drm/i915: Push i915_sw_fence_wait into the nonblocking atomic commit
Blocking in a worker is ok, that's what the unbound_wq is for. And it
unifies the paths between the blocking and nonblocking commit, giving
me just one path where I have to implement the deadlock avoidance
trickery in the next patch.
I first tried to implement the following patch without this rework, but
force-completing i915_sw_fence creates some serious challenges around
properly cleaning things up. So wasn't a feasible short-term approach.
Another approach would be to simple keep track of all pending atomic
commit work items and manually queue them from the reset code. With the
caveat that double-queue in case we race with the i915_sw_fence must be
avoided. Given all that, taking the cost of a double schedule in atomic
for the short-term fix is the best approach, but can be changed in the future of course.
v2: Amend commit message (Chris).
v3: Add comment explaining why we do nothing in the sw_fence complete
callback (Michel).
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> (v2)
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170808080828.23650-2-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 8 Aug 2017 08:08:26 +0000 (10:08 +0200)]
drm/i915: Avoid the gpu reset vs. modeset deadlock
... using the biggest hammer we have. This is essentially a weaponized
version of the timeout-based wedging Chris added in
commit
36703e79a982c8ce5a8e43833291f2719e92d0d1
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Thu Jun 22 11:56:25 2017 +0100
drm/i915: Break modeset deadlocks on reset
Because defense-in-depth is good it's good to still have both. Also
note that with the locking change we can now restrict this a lot (old
gpus and special testing only), so this doesn't kill the TDR benefits
on at least anything remotely modern.
And futuremore with a few tricks it should be possible to make a much
more educated guess about whether an atomic commit is stuck waiting on
the gpu (atomic_t counting the pending i915_sw_fence used by the
atomic modeset code should do it), so we can improve this.
But for now just start with something that is guaranteed to recover
faster, for much better CI througput.
This defacto reverts TDR on these platforms, but there's not really a
single commit to specify as the sole offender.
v2: Add a debug message to explain what's going on. We can't DRM_ERROR
because that spams CI. And the timeout based fallback still prints a
DRM_ERROR, in case something goes wrong.
v3: Fix comment layout (Michel)
Fixes:
4680816be336 ("drm/i915: Wait first for submission, before waiting for request completion")
Fixes:
221fe7994554 ("drm/i915: Perform a direct reset of the GPU from the waiter")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> (v2)
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> (v2)
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170808080828.23650-1-daniel.vetter@ffwll.ch
Mika Kuoppala [Thu, 10 Aug 2017 11:04:51 +0000 (14:04 +0300)]
drm/i915/gen9: Send all components in VF state
Update gen9 renderstate to account the, long overdue, changes for
igt commit
5c07135b7bd2 ("tools/null_state/gen9: Send all
components in VF state").
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170810110451.31635-1-mika.kuoppala@intel.com
Michal Wajdeczko [Wed, 9 Aug 2017 21:26:03 +0000 (21:26 +0000)]
drm/i915/guc: Rename GuC irq trigger function
We should emphasize that irq raising function depends on Gen.
v2: use yet another better name (Chris)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170809212603.28780-1-michal.wajdeczko@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Chris Wilson [Sat, 12 Aug 2017 15:27:24 +0000 (16:27 +0100)]
drm/i915: Suppress switch_mm emission between the same aliasing_ppgtt
When switching between contexts using the aliasing_ppgtt, the VM is
shared. We don't need to reload the PD registers unless they are dirty.
Martin Peres reported an issue that looks like corruption between
Haswell context switches, bisecting to commit
f9326be5f1d3 ("drm/i915:
Rearrange switch_context to load the aliasing ppgtt on first use").
Switching between the same mm (the aliasing_ppgtt is used for all
contexts in this case) should be a nop, but appears to trigger some
side-effects in the context switch. However, as we know the switch
is redundant in this case, we can skip it and continue to ignore the
issue until somebody feels strong enough to investigate full-ppgtt on
gen7 again!
Except.. Martin was using full-ppgtt which is not supported as it
doesn't work correctly yet. So whilst the bisect did yield valuable
information about the failures, the fix should not have any user impact
under default settings, with the exception of a slightly lower
throughput on xcs as the VM would always be reloaded.
v2: Also remember to set the legacy_active_context following the switch
on xcs (commit
e8a9c58fcd9a ("drm/i915: Unify active context tracking
between legacy/execlists/guc"))
Fixes:
f9326be5f1d3 ("drm/i915: Rearrange switch_context to load the aliasing ppgtt on first use")
Fixes:
e8a9c58fcd9a ("drm/i915: Unify active context tracking between legacy/execlists/guc")
Reported-by: Martin Peres <martin.peres@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170812152724.6883-1-chris@chris-wilson.co.uk
Chris Wilson [Thu, 10 Aug 2017 09:40:36 +0000 (10:40 +0100)]
drm/i915: Add SW_SYNC to our recommend testing Kconfig
Since we do use the SW_SYNC in igt for validating dma-fence and
sync_file, and wish to expand usage to cover driver independent portions
of syncobj interaction, ensure SW_SYNC is included in our testing
Kconfig.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jason Ekstrand <jason.ekstrand@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170810094036.4307-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Rodrigo Vivi [Fri, 11 Aug 2017 18:26:50 +0000 (11:26 -0700)]
drm/i915: Introduce intel_hpd_pin function.
The idea is to have an unique place to decide the pin-port
per platform.
So let's create this function now without any functional
change. Just adding together code from hdmi and dp together.
v2: Add missing pin for port A.
v3: Fix typo on subject.
Avoid behaviour change so add WARN_ON and return
if port A on HDMI. (by DK).
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170811182650.14327-2-rodrigo.vivi@intel.com
Rodrigo Vivi [Fri, 11 Aug 2017 18:26:49 +0000 (11:26 -0700)]
drm/i915: Simplify hpd pin to port
We will soon need to make that pin port association per
platform, so let's try to simplify it beforehand.
Also we are moving the backwards port to pin
here as well so let's use a standardized way.
One extra possibility here would be to add a
MISSING_CASE along with PORT_NONE, but I don't want
to change this behaviour for now.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170811182650.14327-1-rodrigo.vivi@intel.com
Rodrigo Vivi [Thu, 10 Aug 2017 22:45:25 +0000 (15:45 -0700)]
drm/i915/cnl: Dump the right pll registers when dumping pipe config.
Different from SKL we don't need ctrl1 and cfgcr2, but
we need to dump cfgcr0 and cfgcr1 instead.
v2: rebase and commit message
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170810224525.18278-1-rodrigo.vivi@intel.com
Rodrigo Vivi [Thu, 10 Aug 2017 22:40:08 +0000 (15:40 -0700)]
drm/i915/cnl: Add allowed DP rates for Cannonlake.
"Frequencies over 5.4 GHz only supported on certain
DDI ports and SKUs, and requires Vccio >= 0.95V."
More specifically, for current CNL SKUs available
(CNL-U and CNL-Y) we have:
DDI A - 5.4G eDP
DDI B - 8.1G DP
DDI C - 8.1G DP
DDI D - 5.4G DP
v2: Rebase on top of source_rates changes.
v3: Address the max 5.4 x 8.1 per DDI and also consider vccio.
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170810224008.15571-1-rodrigo.vivi@intel.com
Matthias Kaehlcke [Mon, 17 Jul 2017 19:58:54 +0000 (12:58 -0700)]
drm/i915: Return correct EDP voltage swing table for 0.85V
For 0.85V cnl_get_buf_trans_edp() returns the DP table, instead of EDP.
Use the correct table.
The error was pointed out by this clang warning:
drivers/gpu/drm/i915/intel_ddi.c:392:39: warning: variable
'cnl_ddi_translations_edp_0_85V' is not needed and will not be emitted
[-Wunneeded-internal-declaration]
static const struct cnl_ddi_buf_trans cnl_ddi_translations_edp_0_85V[] = {
Fixes:
cf54ca8bc567 ("drm/i915/cnl: Implement voltage swing sequence.")
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170717195854.192139-1-mka@chromium.org
Colin Ian King [Fri, 11 Aug 2017 13:49:38 +0000 (14:49 +0100)]
drm/i915: make structure intel_sprite_plane_funcs static
The structure intel_sprite_plane_funcs is local to the source
and does not need to be in global scope, so make it static.
Cleans up sparse warning:
symbol 'intel_sprite_plane_funcs' was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170811134938.4183-1-colin.king@canonical.com
Daniel Vetter [Fri, 11 Aug 2017 07:23:27 +0000 (09:23 +0200)]
drm/i915/fbc: only update no_fbc_reason when active
In our snb farm in CI we have plenty of underruns, but not enough
stolen memory to enable fbc. Which means every time there's an
underrun the no_fbc_reason swichtes to something that makes
kms_frontbuffer_tracking fail instead of skip, adding massive amounts
of additional noise to igt test runs.
Make sure we don't try to disable fbc when it's off already.
v2: Squash in additional WARN_ON suggestion from Chris.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170811072327.4335-1-daniel.vetter@ffwll.ch
Rodrigo Vivi [Wed, 9 Aug 2017 20:07:02 +0000 (13:07 -0700)]
drm/i915/cnl: Add slice and subslice information to debugfs.
A missing part to EU slice power gating is the
debugfs interface. This patch actually should have been
squashed to the initial EU slice power gating one.
v2: Initial patch was merged without this part.
Fixes:
c7ae7e9ab207 ("drm/i915/cnl: Configure EU slice power gating.")
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170809200702.11236-1-rodrigo.vivi@intel.com
Paulo Zanoni [Wed, 9 Aug 2017 20:52:46 +0000 (13:52 -0700)]
drm/i915/gen10: fix WM latency printing
Gen 10 is just like Gen 9, so let's consider that all the future
platforms are going to be like gen 9 instead of being like gen8-.
Cc: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170809205248.11917-4-rodrigo.vivi@intel.com
Paulo Zanoni [Wed, 9 Aug 2017 20:52:45 +0000 (13:52 -0700)]
drm/i915/gen10: fix the gen 10 SAGV block time
A previous commit added CNL to intel_has_sagv(), but forgot to adjust
the SAGV block time to gen 10 platforms.
Cc: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170809205248.11917-3-rodrigo.vivi@intel.com
Rodrigo Vivi [Wed, 9 Aug 2017 20:52:44 +0000 (13:52 -0700)]
drm/i915/cnl: Enable SAGV for Cannonlake.
For now inherit from previous platforms.
v2: Rebase on top of CFL.
Cc: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170809205248.11917-2-rodrigo.vivi@intel.com
Paulo Zanoni [Wed, 9 Aug 2017 20:52:43 +0000 (13:52 -0700)]
drm/i915/gen10+: use the SKL code for reading WM latencies
Gen 10 should use the exact same code as Gen 9, so change the check to
take this into consideration, and also assume that future platforms
will run this code.
Also add a MISSING_CASE(), just in case we do something wrong, instead
of silently failing.
Cc: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170809205248.11917-1-rodrigo.vivi@intel.com
Rodrigo Vivi [Thu, 10 Aug 2017 14:50:43 +0000 (07:50 -0700)]
drm/i915: Avoid null dereference if mst_port is unset.
I'm not sure if this is really the case and I don't believe
this is the real fix for the bug mentioned here, but since
I don't see a reliable path when mst_port is set and when
mode_valid is requested I believe it is worth to have this
protection here.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102022
Cc: Elizabeth <elizabethx.de.la.torre.mena@intel.com>
Cc: Stefan Assmann <sassmann@redhat.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170810145043.24047-1-rodrigo.vivi@intel.com
Chris Wilson [Thu, 10 Aug 2017 17:57:43 +0000 (18:57 +0100)]
drm/i915/perf: Drop redundant check for perf.initialised on reset
As we cannot have an exclusive stream set if the perf has not been
initialized, we only need to check for that exclusive stream.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170810175743.25401-3-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Chris Wilson [Thu, 10 Aug 2017 17:57:42 +0000 (18:57 +0100)]
drm/i915/perf: Drop lockdep assert for i915_oa_init_reg_state()
This is called from execlist context init which we need to be unlocked.
Commit
f89823c21224 ("drm/i915/perf: Implement
I915_PERF_ADD/REMOVE_CONFIG interface") added a lockdep assert to this
path for unclear reasons, remove it again!
Fixes:
f89823c21224 ("drm/i915/perf: Implement I915_PERF_ADD/REMOVE_CONFIG interface")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170810175743.25401-2-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Chris Wilson [Thu, 10 Aug 2017 17:57:41 +0000 (18:57 +0100)]
drm/i915/perf: Initialise dynamic sysfs group before creation
Another case where we need to call sysfs_attr_init() to setup the
internal lockdep class prior to use:
[ 9.325229] BUG: key
ffff880168bc7bb0 not in .data!
[ 9.325240] DEBUG_LOCKS_WARN_ON(1)
[ 9.325250] ------------[ cut here ]------------
[ 9.325280] WARNING: CPU: 1 PID: 275 at kernel/locking/lockdep.c:3156 lockdep_init_map+0x1b2/0x1c0
[ 9.325301] Modules linked in: intel_powerclamp(+) coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel i915(+) snd_hda_intel snd_hda_codec snd_hwdep r8169 mii snd_hda_core snd_pcm prime_numbers i2c_hid pinctrl_geminilake pinctrl_intel
[ 9.325375] CPU: 1 PID: 275 Comm: modprobe Not tainted 4.13.0-rc4-CI-Trybot_1040+ #1
[ 9.325395] Hardware name: Intel Corp. Geminilake/GLK RVP2 LP4SD (07), BIOS GELKRVPA.X64.0045.B51.
1704281422 04/28/2017
[ 9.325422] task:
ffff8801721a4ec0 task.stack:
ffffc900001dc000
[ 9.325440] RIP: 0010:lockdep_init_map+0x1b2/0x1c0
[ 9.325456] RSP: 0018:
ffffc900001dfa10 EFLAGS:
00010282
[ 9.325473] RAX:
0000000000000016 RBX:
ffff880168d54b80 RCX:
0000000000000000
[ 9.325488] RDX:
0000000080000001 RSI:
0000000000000001 RDI:
ffffffff810f0800
[ 9.325505] RBP:
ffffc900001dfa30 R08:
0000000000000001 R09:
0000000000000000
[ 9.325521] R10:
0000000000000000 R11:
0000000000000000 R12:
ffff880168bc7bb0
[ 9.325537] R13:
0000000000000000 R14:
ffff880168bc7b98 R15:
ffffffff81a263a0
[ 9.325554] FS:
00007fb60c3fd700(0000) GS:
ffff88017fc80000(0000) knlGS:
0000000000000000
[ 9.325574] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 9.325588] CR2:
0000006582777d80 CR3:
000000016d818000 CR4:
00000000003406e0
[ 9.325604] Call Trace:
[ 9.325618] __kernfs_create_file+0x76/0xe0
[ 9.325632] sysfs_add_file_mode_ns+0x8a/0x1a0
[ 9.325646] internal_create_group+0xea/0x2c0
[ 9.325660] sysfs_create_group+0x13/0x20
[ 9.325737] i915_perf_register+0xde/0x220 [i915]
[ 9.325800] i915_driver_load+0xa77/0x16c0 [i915]
[ 9.325863] i915_pci_probe+0x37/0x90 [i915]
[ 9.325880] pci_device_probe+0xa8/0x130
[ 9.325894] driver_probe_device+0x29c/0x450
[ 9.325908] __driver_attach+0xe3/0xf0
[ 9.325922] ? driver_probe_device+0x450/0x450
[ 9.325935] bus_for_each_dev+0x62/0xa0
[ 9.325948] driver_attach+0x1e/0x20
[ 9.325960] bus_add_driver+0x173/0x270
[ 9.325974] driver_register+0x60/0xe0
[ 9.325986] __pci_register_driver+0x60/0x70
[ 9.326044] i915_init+0x6f/0x78 [i915]
[ 9.326066] ? 0xffffffffa024e000
[ 9.326079] do_one_initcall+0x43/0x170
[ 9.326094] ? rcu_read_lock_sched_held+0x7a/0x90
[ 9.326109] ? kmem_cache_alloc_trace+0x261/0x2d0
[ 9.326124] do_init_module+0x5f/0x206
[ 9.326137] load_module+0x2561/0x2da0
[ 9.326150] ? show_coresize+0x30/0x30
[ 9.326165] ? kernel_read_file+0x105/0x190
[ 9.326180] SyS_finit_module+0xc1/0x100
[ 9.326192] ? SyS_finit_module+0xc1/0x100
[ 9.326210] entry_SYSCALL_64_fastpath+0x1c/0xb1
[ 9.326223] RIP: 0033:0x7fb60bf359f9
[ 9.326234] RSP: 002b:
00007fff92b47c48 EFLAGS:
00000246 ORIG_RAX:
0000000000000139
[ 9.326255] RAX:
ffffffffffffffda RBX:
ffffffff814898a3 RCX:
00007fb60bf359f9
[ 9.326271] RDX:
0000000000000000 RSI:
00000028a9ceef8b RDI:
0000000000000000
[ 9.326287] RBP:
ffffc900001dff88 R08:
0000000000000000 R09:
0000000000000000
[ 9.326303] R10:
0000000000000000 R11:
0000000000000246 R12:
0000000000040000
[ 9.326319] R13:
00000028aaef2a70 R14:
0000000000000000 R15:
00000028aaeee5d0
[ 9.326339] ? __this_cpu_preempt_check+0x13/0x20
[ 9.326353] Code: f1 39 00 85 c0 0f 84 38 ff ff ff 83 3d 9f 44 ce 01 00 0f 85 2b ff ff ff 48 c7 c6 b2 a2 c7 81 48 c7 c7 53 40 c5 81 e8 3f 82 01 00 <0f> ff e9 11 ff ff ff 0f 1f 80 00 00 00 00 55 31 c9 31 d2 31 f6
Fixes:
701f8231a2fe ("drm/i915/perf: prune OA configs")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170810175743.25401-1-chris@chris-wilson.co.uk
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Jani Nikula [Thu, 10 Aug 2017 12:29:44 +0000 (15:29 +0300)]
drm/i915: add register macro definition style guide
This is not to try to force a new style; this is my interpretation of
what the most common existing style is.
With hopes I don't need to answer so many questions about style going
forward.
Start a new style section in the i915 document to bolt the register
style guide into.
v2: vertical alignment, incorporate to kernel-doc, and more
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9de4a5b1bea4e76461c70a1dd66751581de0124f.1502368010.git.jani.nikula@intel.com
Jani Nikula [Thu, 10 Aug 2017 12:29:43 +0000 (15:29 +0300)]
drm/i915: enum i915_power_well_id is not proper kernel-doc
Revert to a normal comment, as the enum isn't properly documented
anyway.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f2c44a0aa00ea7d9b71e7a3183a7507f98811146.1502368010.git.jani.nikula@intel.com
Jani Nikula [Thu, 10 Aug 2017 12:29:42 +0000 (15:29 +0300)]
Documentation/i915: remove sphinx conversion artefact
Remove old warning about docproc directive that's not supported in the
Sphinx toolchain.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7fc8a110b78a9dc9a585dce643b68b4200b7e793.1502368010.git.jani.nikula@intel.com
Ben Widawsky [Tue, 1 Aug 2017 16:58:16 +0000 (09:58 -0700)]
drm/i915: Add format modifiers for Intel
This was based on a patch originally by Kristian. It has been modified
pretty heavily to use the new callbacks from the previous patch.
v2:
- Add LINEAR and Yf modifiers to list (Ville)
- Combine i8xx and i965 into one list of formats (Ville)
- Allow
1010102 formats for Y/Yf tiled (Ville)
v3:
- Handle cursor formats (Ville)
- Put handling for LINEAR in the mod_support functions (Ville)
v4:
- List each modifier explicitly in supported modifiers (Ville)
- Handle the CURSOR plane (Ville)
v5:
- Split out cursor and sprite handling (Ville)
v6:
- Actually use the sprite funcs (Emil)
- Use unreachable (Emil)
v7:
- Only allow Intel modifiers and LINEAR (Ben)
v8
- Fix spite assert introduced in v6 (Daniel)
v9
- Change vendor check logic to avoid magic 56 (Emil)
- Reorder skl_mod_support (Ville)
- make intel_plane_funcs static, could be done as of v5 (Ville)
- rename local variable intel_format_modifiers to modifiers (Ville)
- actually use sprite modifiers
- split out modifier/formats by platform (Ville)
v10:
- Undo vendor check from v9
v11:
- Squash CCS advertisement into this patch (daniels)
- Don't advertise CCS on higher sprite planes (daniels)
v12:
- Don't advertise Y-tiled or CCS on any sprite planes, since we don't
allocate enough DDB space for it to work. (daniels)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> (v8)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Stone <daniels@collabora.com>
Ville Syrjälä [Tue, 1 Aug 2017 16:58:13 +0000 (09:58 -0700)]
drm/i915: Add render decompression support
SKL+ display engine can scan out certain kinds of compressed surfaces
produced by the render engine. This involved telling the display engine
the location of the color control surfae (CCS) which describes
which parts of the main surface are compressed and which are not. The
location of CCS is provided by userspace as just another plane with its
own offset.
Add the required stuff to validate the user provided AUX plane metadata
and convert the user provided linear offset into something the hardware
can consume.
Due to hardware limitations we require that the main surface and
the AUX surface (CCS) be part of the same bo. The hardware also
makes life hard by not allowing you to provide separate x/y offsets
for the main and AUX surfaces (excpet with NV12), so finding suitable
offsets for both requires a bit of work. Assuming we still want keep
playing tricks with the offsets. I've just gone with a dumb "search
backward for suitable offsets" approach, which is far from optimal,
but it works.
Also not all planes will be capable of scanning out compressed surfaces,
and eg. 90/270 degree rotation is not supported in combination with
decompression either.
This patch may contain work from at least the following people:
* Vandana Kannan <vandana.kannan@intel.com>
* Daniel Vetter <daniel@ffwll.ch>
* Ben Widawsky <ben@bwidawsk.net>
v2: Deal with display workarounds 0390, 0531, 1125 (Paulo)
v3: Pretend CCS tiles are regular 128 byte wide Y tiles (Jason)
Put the AUX register defines to the correct place
Fix up the slightly bogus rotation check
v4: Use I915_WRITE_FW() due to plane update locking changes
s/return -EINVAL/goto err/ in intel_framebuffer_init()
Eliminate a bunch hardcoded numbers in CCS code
v5: (By Ben)
conflict resolution +
- res_blocks += fixed_16_16_to_u32_round_up(y_tile_minimum);
+ res_blocks += fixed16_to_u32_round_up(y_tile_minimum);
v6: (daniels) Fix botched commit message.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Ville Syrjä <ville.syrjala@linux.intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net> (v1)
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Stone <daniels@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170801165817.7063-1-ben@bwidawsk.net
Ville Syrjälä [Tue, 1 Aug 2017 16:58:12 +0000 (09:58 -0700)]
drm/i915: Implement .get_format_info() hook for CCS
SKL+ display engine can scan out certain kinds of compressed surfaces
produced by the render engine. This involved telling the display engine
the location of the color control surfae (CCS) which describes which
parts of the main surface are compressed and which are not. The location
of CCS is provided by userspace as just another plane with its own offset.
By providing our own format information for the CCS formats, we should
be able to make framebuffer_check() do the right thing for the CCS
surface as well.
Note that we'll return the same format info for both Y and Yf tiled
format as that's what happens with the non-CCS Y vs. Yf as well. If
desired, we could potentially return a unique pointer for each
pixel_format+tiling+ccs combination, in which case we immediately be
able to tell if any of that stuff changed by just comparing the
pointers. But that does sound a bit wasteful space wise.
v2: Drop the 'dev' argument from the hook
v3: Include the description of the CCS surface layout
v4: Pretend CCS tiles are regular 128 byte wide Y tiles (Jason)
v5: Re-drop 'dev', fix commit message, add missing drm_fourcc.h
description of CCS layout. (daniels)
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net> (v3)
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Ville Syrjä <ville.syrjala@linux.intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Stone <daniels@collabora.com>
Daniel Vetter [Thu, 10 Aug 2017 16:12:01 +0000 (18:12 +0200)]
Merge airlied/drm-next into drm-intel-next-queued
Ben Widawsky/Daniel Stone need the extended modifier support from
drm-misc to be able to merge CCS support for i915.ko
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Wed, 9 Aug 2017 16:39:30 +0000 (17:39 +0100)]
drm/i915: Supply the engine-id for our mock_engine()
In the original selftest, we didn't care what the engine->id was, just
that it could uniquely identify it. Later though, we started tracking
the mock engines in the fixed size arrays around the drm_i915_private and
so we now require their indices to be correct. This becomes an issue when
using the standalone harness which runs all available tests at module load,
and so we quickly assign an out-of-bounds index to an engine as we
reallocate the mock GEM device between tests. It doesn't show up in
igt/drv_selftest as that runs each subtest individually.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102045
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170809163930.26470-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Dave Airlie [Thu, 10 Aug 2017 00:47:33 +0000 (10:47 +1000)]
Merge tag 'drm-misc-next-2017-08-08' of git://anongit.freedesktop.org/git/drm-misc into drm-next
UAPI Changes:
- vc4: Add ioctl to allow attaching a label to a bo (Eric)
- Add new format/modifier blob plane property (Ben)
- armada: Use __u32/__u64 instead of uint32_t/uint64_t (Mikko)
- [kinda uapi] fb_helper: Expose display_info size via fb_info (David)
Core Changes:
- Default gem_dumb_[map_offset|destroy] as mmap/destroy implementations (Noralf)
- Simplify atomic properties by removing the helpers and handling in core (Daniel)
Driver Changes:
- stm: Add STM32 DSI controller driver (Phillipe)
- vc4: Add HDMI CEC support (Hans)
- rockchip: Refactor register init & soc version handling (Mark)
- misc: Remove .load_lut, .gamma_set, .gamma_get dead code (Peter)
- dw-hdmi: Add HDMI CEC support (Russell)
Cc: Philippe CORNU <philippe.cornu@st.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Mark yao <mark.yao@rock-chips.com>
Cc: Peter Rosin <peda@axentia.se>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: David Lechner <david@lechnology.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
* tag 'drm-misc-next-2017-08-08' of git://anongit.freedesktop.org/git/drm-misc: (107 commits)
drm: Nuke drm_atomic_legacy_backoff
drm: Nuke drm_atomic_helper_connector_dpms
drm: Nuke drm_atomic_helper_connector_set_property
drm: Nuke drm_atomic_helper_plane_set_property
drm: Nuke drm_atomic_helper_crtc_set_property
drm: Handle properties in the core for atomic drivers
drm: Don't update property values for atomic drivers
drm/omap: Rework the rotation-on-crtc hack
drm/radeon: Use the drm_driver.dumb_destroy default
drm/i915: Use the drm_driver.dumb_destroy default
drm/sti: Use .dumb_map_offset and .dumb_destroy defaults
drm: bridge: synopsys/dw-hdmi: Provide default configuration function for HDMI 2.0 PHY
drm/fb-helper: pass physical dimensions to fbdev
uapi drm/armada_drm.h: use __u32 and __u64 instead of uint32_t and uint64_t
drm/bridge: dw-hdmi: remove CEC engine register definitions
drm/bridge: dw-hdmi: add cec driver
drm/bridge: dw-hdmi: add missing cec_notifier_put
drm: remove unused and redundant callbacks
staging: vboxvideo: remove dead gamma lut code
drm: dw-hdmi-i2s: add missing company name on Copyright
...
Jim Bride [Tue, 8 Aug 2017 21:51:34 +0000 (14:51 -0700)]
drm/i915/psr: Preserve SRD_CTL bit 29 on PSR init
Bit 29 of SRD_CTL needs to have its value preserved according to the
B-Spec, so right before we write out the register we go ahead and read
the register and preserve the value of that bit before we write out
the configured register value.
v2: Spaces => tabs, minor name change, and commit message wording (Rodrigo)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jim Bride <jim.bride@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1502229094-13392-1-git-send-email-jim.bride@linux.intel.com
Rodrigo Vivi [Tue, 8 Aug 2017 19:32:37 +0000 (12:32 -0700)]
drm/i915/cnl: Removing missing DDI_E bits from CNL.
DDI_E is not supported on CNL-U and CNL-Y
When adding the initial support we noticed DDI_E wasn't supported
and removed it on v4 and v5 of that patch.
However for some reason I missed or put back these 2 chunks.
Time to clean it up to avoid later confusion.
Fixes:
8bcd3dd41766 ("drm/i915/cnl: Add power wells for CNL")
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170808193237.17410-1-rodrigo.vivi@intel.com
Chris Wilson [Tue, 8 Aug 2017 13:19:04 +0000 (14:19 +0100)]
drm/i915: Perform an invalidate prior to executing golden renderstate
As we may have just bound the renderstate into the GGTT for execution, we
need to ensure that the GTT TLB are also flushed.
On snb-gt2, this would cause a random GPU hang at the start of a new
context (e.g. boot) and on snb-gt1, it was causing the renderstate batch
to take ~10s. It was the GPU hang that revealed the truth, as the CS
gleefully executed beyond the end of the golden renderstate batch, a good
indicator for a GTT TLB miss.
Fixes:
20fe17aa52dc ("drm/i915: Remove redundant TLB invalidate on switching contexts")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20170808131904.1385-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.12-rc1+
Daniel Vetter [Tue, 25 Jul 2017 08:01:22 +0000 (10:01 +0200)]
drm: Nuke drm_atomic_legacy_backoff
Finally all users are gone!
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-9-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 25 Jul 2017 08:01:21 +0000 (10:01 +0200)]
drm: Nuke drm_atomic_helper_connector_dpms
It's dead code, the core handles all this directly now.
The only special case is nouveau and tda988x which used one function
for both legacy modeset code and -nv50 atomic world instead of 2
vtables. But amounts to exactly the same.
v2: Rebase over the panel/brideg refactorings in stm/ltdc.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Peter Senna Tschudin <peter.senna@collabora.com>
Cc: Martin Donnelly <martin.donnelly@ge.com>
Cc: Martyn Welch <martyn.welch@collabora.co.uk>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Alison Wang <alison.wang@freescale.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Carlo Caione <carlo@caione.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Mark Yao <mark.yao@rock-chips.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Yannick Fertre <yannick.fertre@st.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: Jeffy Chen <jeffy.chen@rock-chips.com>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Yakir Yang <kuankuan.y@gmail.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Romain Perier <romain.perier@collabora.com>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Hai Li <hali@codeaurora.org>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-amlogic@lists.infradead.org
Cc: nouveau@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-tegra@vger.kernel.org
Cc: virtualization@lists.linux-foundation.org
Cc: zain wang <wzz@rock-chips.com>
Cc: Baoyou Xie <baoyou.xie@linaro.org>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-8-daniel.vetter@ffwll.ch
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Archit Taneja <architt@codeaurora.org>
Tested-by: Philippe Cornu <philippe.cornu@st.com> (on stm)
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Vincent Abriou <vincent.abriou@st.com>
Daniel Vetter [Tue, 25 Jul 2017 08:01:20 +0000 (10:01 +0200)]
drm: Nuke drm_atomic_helper_connector_set_property
It's dead code, the core handles all this directly now. This also
allows us to unexport drm_atomic_helper_connector_set_property.
The only special case is nouveau which used one function for both
pre-nv50 legacy modeset code and post-nv50 atomic world instead of 2
vtables. But amounts to exactly the same.
What is rather strange here is how few drivers set this up, I suspect
the earlier patch to handle properties in the core did end up fixing a
pile of possible issues.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: intel-gfx@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-7-daniel.vetter@ffwll.ch
Acked-by: Vincent Abriou <vincent.abriou@st.com>
Daniel Vetter [Tue, 25 Jul 2017 08:01:19 +0000 (10:01 +0200)]
drm: Nuke drm_atomic_helper_plane_set_property
It's dead code, the core handles all this directly now. This also
allows us to unexport drm_atomic_plane_set_property.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Yannick Fertre <yannick.fertre@st.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Eric Engestrom <eric@engestrom.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-6-daniel.vetter@ffwll.ch
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Vincent Abriou <vincent.abriou@st.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Daniel Vetter [Tue, 25 Jul 2017 08:01:18 +0000 (10:01 +0200)]
drm: Nuke drm_atomic_helper_crtc_set_property
It's dead code because this is now handled in the core.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Eric Engestrom <eric@engestrom.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Sushmita Susheelendra <ssusheel@codeaurora.org>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: intel-gfx@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-5-daniel.vetter@ffwll.ch
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
Daniel Vetter [Tue, 25 Jul 2017 12:02:04 +0000 (14:02 +0200)]
drm: Handle properties in the core for atomic drivers
The reason behind the original indirection through the helper
functions was to allow existing drivers to overwrite how they handle
properties. For example when a vendor-specific userspace had
expectations that didn't match atomic. That seemed likely, since
atomic is standardizing a _lot_ more of the behaviour of a kms driver.
But 20 drivers later there's no such need at all. Worse, this forces
all drivers to hook up the default behaviour, breaking userspace if
they forget to do that. And it forces us to export a bunch of core
function just for those helpers.
And finally, these helpers are the last places using
drm_atomic_legacy_backoff() and the implicit acquire_ctx.
This patch here just implements the new behaviour and updates the
docs. Follow-up patches will garbage-collect all the dead code.
v2: Fixup docs even better!
v3: Make it actually work ...
v4: Drop the uses_atomic_modeset() checks from the previous patch
again, since they're now moved up in the callchain.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org> (v3)
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170725120204.2107-1-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 25 Jul 2017 12:01:37 +0000 (14:01 +0200)]
drm: Don't update property values for atomic drivers
Atomic drivers only use the property value store for immutable (i.e.
can't be set by userspace, but the kernel can still adjust it)
properties. The only tricky part is the removal of the update in
drm_atomic_helper_update_legacy_modeset_state().
This was added in
commit
8c10342cb48f3140d9abeadcfd2fa6625d447282 (tag: topic/drm-misc-2015-07-28)
Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Date: Mon Jul 27 13:24:29 2015 +0200
drm/atomic: Update legacy DPMS state during modesets, v3.
by copying it from the i915 code, where it was originally added in
commit
68d3472047a572936551f8ff0b6f4016c5a1fdef
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Sep 6 22:08:35 2012 +0200
drm/i915: update dpms property in set_mode
for the legacy modeset code. The reason we needed this hack was that
i915 didn't yet set DRIVER_ATOMIC, and we checked for that instead of
the newer-ish drm_drv_uses_atomic_modeset(), which avoids such
troubles. With the correct feature checks this isn't needed anymore at
all.
Also make sure that drivers don't accidentally get this wrong by
making the exported version of drm_object_property_get_value() only
work for legacy drivers. Only gma500 uses it anyway.
v2: Fixup the uses_atomic_modeset() checks (Maarten)
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170725120137.1903-1-daniel.vetter@ffwll.ch
Maarten Lankhorst [Mon, 7 Aug 2017 10:20:06 +0000 (12:20 +0200)]
drm/omap: Rework the rotation-on-crtc hack
I want/need to rework the core property handling, and this hack is
getting in the way. But since it's a non-standard propety only used by
legacy userspace we know that this will only every be called from
ioctl code. And never on some other free-standing state struct, where
this old hack wouldn't work either.
v2: don't forget zorder and get_property!
v3: Shadow the legacy state to avoid locking issues in get_property
(Maarten).
v4: Review from Laurent
- Move struct omap_crtc_state into omap_crtc.c
- Clean up comments.
- Don't forget to copy the shadowed state over on duplicate.
v5: Don't forget to update the reset handler (Maarten).
v6: Update omap_crtc_state shadow values in omap_crtc_atomic_check (Maarten).
v7:
- Fix get_property to return 0 and set value in *val (Maarten).
- Update comment in set_property for changes in v6 (Maarten).
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> (v4)
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> (v4)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/a6a10a4f-2ebc-5f81-00bd-5e906967f384@linux.intel.com
Noralf Trønnes [Sun, 6 Aug 2017 15:41:04 +0000 (17:41 +0200)]
drm/radeon: Use the drm_driver.dumb_destroy default
drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default,
so no need to set it.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-16-git-send-email-noralf@tronnes.org
Noralf Trønnes [Sun, 6 Aug 2017 15:41:00 +0000 (17:41 +0200)]
drm/i915: Use the drm_driver.dumb_destroy default
drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default,
so no need to set it.
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-12-git-send-email-noralf@tronnes.org
Noralf Trønnes [Sun, 6 Aug 2017 15:40:53 +0000 (17:40 +0200)]
drm/sti: Use .dumb_map_offset and .dumb_destroy defaults
This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Vincent Abriou <vincent.abriou@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-5-git-send-email-noralf@tronnes.org
Jose Abreu [Fri, 23 Jun 2017 09:36:44 +0000 (10:36 +0100)]
drm: bridge: synopsys/dw-hdmi: Provide default configuration function for HDMI 2.0 PHY
Currently HDMI 2.0 PHYs do not have a default configuration function.
As *some* of the HDMI 2.0 PHYs have the same register layout as the 3D
PHYs we can provide the same default configuration function for both
and still let user overwrite this with custom configuration function
if needed.
If, for some reason, the PHY is custom or has a register different
register layout then custom configuration function *must* be provided
in order for the system to work correctly. As we prefer the pdata
provided configuration function over the internal one this change
will not make any impact in custom platforms.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Tested-by: Mark Yao <mark.yao@rock-chips.com>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Mark Yao <mark.yao@rock-chips.com>
Cc: Carlos Palminha <palminha@synopsys.com>
Cc: Heiko Stübner <heiko@sntech.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/185ccf7d4473fa557044732402ca20b3d4007952.1498209896.git.joabreu@synopsys.com
Lionel Landwerlin [Fri, 4 Aug 2017 14:03:48 +0000 (15:03 +0100)]
drm/i915: remove unused function declaration
This function is not part of the driver anymore.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes:
90f4fcd56bda ("drm/i915: Remove forced stop ring on suspend/unload")
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170804140348.24971-1-lionel.g.landwerlin@intel.com
David Lechner [Fri, 4 Aug 2017 16:25:24 +0000 (11:25 -0500)]
drm/fb-helper: pass physical dimensions to fbdev
The fbdev subsystem has a place for physical dimensions (width and height
in mm) that is readable by userspace. Since DRM also knows these
dimensions, pass this information to the fbdev device.
This has to be done in drm_setup_crtcs_fb() instead of drm_setup_crtcs()
because fb_helper->fbdev may be NULL in drm_setup_crtcs().
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1501863924-7154-1-git-send-email-david@lechnology.com
Mikko Rapeli [Sun, 6 Aug 2017 16:44:23 +0000 (18:44 +0200)]
uapi drm/armada_drm.h: use __u32 and __u64 instead of uint32_t and uint64_t
These are defined in linux/types.h or drm/drm.h. Fixes
user space compilation errors like:
drm/armada_drm.h:26:2: error: unknown type name ‘uint32_t’
uint32_t handle;
^~~~~~~~
Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Gabriel Laskar <gabriel@lse.epita.fr>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170806164428.2273-33-mikko.rapeli@iki.fi
Russell King [Wed, 2 Aug 2017 18:41:08 +0000 (20:41 +0200)]
drm/bridge: dw-hdmi: remove CEC engine register definitions
We don't need the CEC engine register definitions, so let's remove them.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Tested-by: Hans Verkuil <hans.verkuil@cisco.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20170802184108.7913-5-hverkuil@xs4all.nl
Russell King [Wed, 2 Aug 2017 18:41:07 +0000 (20:41 +0200)]
drm/bridge: dw-hdmi: add cec driver
Add a CEC driver for the dw-hdmi hardware.
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
[hans.verkuil: unsigned -> unsigned int]
[hans.verkuil: cec_transmit_done -> cec_transmit_attempt_done]
[hans.verkuil: add missing CEC_CAP_PASSTHROUGH]
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Tested-by: Hans Verkuil <hans.verkuil@cisco.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20170802184108.7913-4-hverkuil@xs4all.nl
Hans Verkuil [Mon, 7 Aug 2017 07:20:35 +0000 (09:20 +0200)]
drm/bridge: dw-hdmi: add missing cec_notifier_put
The __dw_hdmi_remove() function was missing a call to cec_notifier_put
to balance the cec_notifier_get in the probe function.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/a7688d13-2d61-ed16-f2df-28cbb5007f38@xs4all.nl
Peter Rosin [Thu, 13 Jul 2017 16:25:38 +0000 (18:25 +0200)]
drm: remove unused and redundant callbacks
Drivers no longer have any need for these callbacks, and there are no
users. Zap. Zap-zap-zzzap-p-pp-p.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-15-peda@axentia.se
Peter Rosin [Fri, 4 Aug 2017 10:45:06 +0000 (12:45 +0200)]
staging: vboxvideo: remove dead gamma lut code
The redundant fb helpers .load_lut, .gamma_set and .gamma_get are
no longer used. Remove the dead code that was not doing anything
sensible anyway.
Signed-off-by: Peter Rosin <peda@axentia.se>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170804104506.2414-1-peda@axentia.se
Kuninori Morimoto [Mon, 7 Aug 2017 04:09:41 +0000 (04:09 +0000)]
drm: dw-hdmi-i2s: add missing company name on Copyright
This driver's Copyright is under Renesas Solutions Corp.
This patch updates the year, because this driver was moved
into synopsys folder in 2017.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/87tw1khvnq.wl%kuninori.morimoto.gx@renesas.com
Chris Wilson [Fri, 28 Jul 2017 11:21:10 +0000 (12:21 +0100)]
drm/i915/selftests: Retarget igt_render_engine_reset_fallback()
The purpose of the test was to check per-engine resets would fallback to
the global reset when required, but first we actually need a test for a
basic i915_handle_error()!
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170728112110.6464-1-chris@chris-wilson.co.uk
Russell King [Mon, 31 Jul 2017 14:29:46 +0000 (15:29 +0100)]
drm/bridge: dw-hdmi: add better clock disable control
The video setup path aways sets the clock disable register to a specific
value, which has the effect of disabling the CEC engine. When we add the
CEC driver, this becomes a problem.
Fix this by only setting/clearing the bits that the video path needs to.
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/E1dcBha-00088l-DE@rmk-PC.armlinux.org.uk
Russell King [Mon, 31 Jul 2017 14:29:41 +0000 (15:29 +0100)]
drm/bridge: dw-hdmi: add cec notifier support
Add CEC notifier support to the HDMI bridge driver, so that the CEC
part of the IP can receive its physical address.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/E1dcBhV-00088e-8x@rmk-PC.armlinux.org.uk
David Lechner [Thu, 3 Aug 2017 22:33:45 +0000 (17:33 -0500)]
drm/tinydrm: remove call to mipi_dbi_init() from mipi_dbi_spi_init()
This removes the call to mipi_dbi_init() from mipi_dbi_spi_init() so that
drivers can have a driver-specific implementation if needed.
Suggested-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: David Lechner <david@lechnology.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1501799630-1650-2-git-send-email-david@lechnology.com
Noralf Trønnes [Sun, 23 Jul 2017 19:16:23 +0000 (21:16 +0200)]
drm/fsl-dcu: Use .dumb_map_offset and .dumb_destroy defaults
This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.
Cc: Stefan Agner <stefan@agner.ch>
Cc: Alison Wang <alison.wang@freescale.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-8-git-send-email-noralf@tronnes.org
Jani Nikula [Wed, 31 May 2017 08:33:55 +0000 (11:33 +0300)]
drm/i915: fix backlight invert for non-zero minimum brightness
When we started following the backlight minimum brightness in
6dda730e55f4 ("drm/i915: respect the VBT minimum backlight brightness")
we overlooked the brightness invert quirk. Even if we invert the
brightness, we need to take the min limit into account. We probably
missed this because the invert has only been required on gen4 for proper
operation.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101127
Fixes:
6dda730e55f4 ("drm/i915: respect the VBT minimum backlight brightness")
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170531083355.7898-1-jani.nikula@intel.com
Chris Wilson [Fri, 4 Aug 2017 10:41:35 +0000 (11:41 +0100)]
drm/i915/shrinker: Wrap need_resched() inside preempt-disable
In order for us to successfully detect the end of a timeslice,
preemption must be disabled. Otherwise, inside the loop we may be
preempted many times without our noticing, and each time our timeslice
will be reset, invalidating need_resched()
Reported-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reported-by: Tomi Sarvela <tomi.p.sarvela@intel.com>
Fixes:
290271de34f6 ("drm/i915: Spin for struct_mutex inside shrinker")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.13-rc1+
Link: https://patchwork.freedesktop.org/patch/msgid/20170804104135.26805-1-chris@chris-wilson.co.uk
Tested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Thu, 3 Aug 2017 22:37:00 +0000 (23:37 +0100)]
drm/i915/perf: Initialise the dynamic sysfs attr
Use sysfs_attr_init() to dynamically initialise the
oa_config->sysfs_metric_id.attr as it has the important side-effect of
setting the lockdep key.
[ 4.971513] [drm] Initialized i915 1.6.0
20170731 for 0000:00:02.0 on minor 0
[ 4.973489] BUG: key
ffff88026f6e7bb0 not in .data!
[ 4.973506] DEBUG_LOCKS_WARN_ON(1)
[ 4.973518] ------------[ cut here ]------------
[ 4.973547] WARNING: CPU: 1 PID: 258 at kernel/locking/lockdep.c:3156 lockdep_init_map+0x1b2/0x1c0
[ 4.973567] Modules linked in: i915(+) x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm r8169 mei_me mii mei lpc_ich prime_numbers i2c_hid pinctrl_broxton pinctrl_intel
[ 4.973645] CPU: 1 PID: 258 Comm: systemd-udevd Not tainted 4.13.0-rc3-CI-CI_DRM_2915+ #1
[ 4.973664] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./J4205-ITX, BIOS P1.10 09/29/2016
[ 4.973686] task:
ffff8802704c2740 task.stack:
ffffc90000224000
[ 4.973700] RIP: 0010:lockdep_init_map+0x1b2/0x1c0
[ 4.973712] RSP: 0018:
ffffc90000227a10 EFLAGS:
00010282
[ 4.973726] RAX:
0000000000000016 RBX:
ffff880262aac010 RCX:
0000000000000000
[ 4.973741] RDX:
0000000080000001 RSI:
0000000000000001 RDI:
ffffffff810ed1ab
[ 4.973757] RBP:
ffffc90000227a30 R08:
0000000000000001 R09:
0000000000000000
[ 4.973774] R10:
0000000000000000 R11:
0000000000000000 R12:
ffff88026f6e7bb0
[ 4.973789] R13:
0000000000000000 R14:
ffff88026f6e7b98 R15:
ffffffff81a24da0
[ 4.973805] FS:
00007f588d7f58c0(0000) GS:
ffff88027fc80000(0000) knlGS:
0000000000000000
[ 4.973823] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 4.973837] CR2:
00000082482e32a0 CR3:
0000000270531000 CR4:
00000000003406e0
[ 4.973852] Call Trace:
[ 4.973864] __kernfs_create_file+0x71/0xe0
[ 4.973876] sysfs_add_file_mode_ns+0x85/0x1a0
[ 4.973890] internal_create_group+0xe5/0x2b0
[ 4.973903] sysfs_create_group+0xe/0x10
[ 4.973985] i915_perf_register+0xd9/0x220 [i915]
[ 4.974044] i915_driver_load+0xa72/0x16b0 [i915]
[ 4.974124] i915_pci_probe+0x32/0x90 [i915]
Annoyingly detected by CI, but not reported due to it occurring during boot
and disabling lockdep for later runs.
Fixes:
f89823c21224 ("drm/i915/perf: Implement I915_PERF_ADD/REMOVE_CONFIG interface")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Andrzej Datczuk <andrzej.datczuk@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170803223700.10329-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Peter Rosin [Thu, 13 Jul 2017 16:25:37 +0000 (18:25 +0200)]
drm: stm: remove dead code and pointless local lut storage
The redundant fb helper .load_lut is no longer used, and can not
work right without also providing the fb helpers .gamma_set and
.gamma_get thus rendering the code in this driver suspect.
Just remove the dead code.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-14-peda@axentia.se
Peter Rosin [Thu, 13 Jul 2017 16:25:36 +0000 (18:25 +0200)]
drm: radeon: remove dead code and pointless local lut storage
The redundant fb helpers .load_lut, .gamma_set and .gamma_get are
no longer used. Remove the dead code and hook up the crtc .gamma_set
to use the crtc gamma_store directly instead of duplicating that
info locally.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Rosin <peda@axentia.se>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-13-peda@axentia.se
Peter Rosin [Thu, 13 Jul 2017 16:25:35 +0000 (18:25 +0200)]
drm: nouveau: remove dead code and pointless local lut storage
The redundant fb helpers .load_lut, .gamma_set and .gamma_get are
no longer used. Remove the dead code and hook up the crtc .gamma_set
to use the crtc gamma_store directly instead of duplicating that
info locally.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-12-peda@axentia.se
Peter Rosin [Thu, 13 Jul 2017 16:25:34 +0000 (18:25 +0200)]
drm: mgag200: remove dead code and pointless local lut storage
The redundant fb helpers .load_lut, .gamma_set and .gamma_get are
no longer used. Remove the dead code and hook up the crtc .gamma_set
to use the crtc gamma_store directly instead of duplicating that
info locally.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-11-peda@axentia.se
Peter Rosin [Thu, 13 Jul 2017 16:25:33 +0000 (18:25 +0200)]
drm: i915: remove dead code and pointless local lut storage
The driver stores lut values from the fbdev interface, and is able
to give them back, but does not appear to do anything with these
lut values. The generic fb helpers have replaced this function,
and may even have made the driver work for the C8 mode from the
fbdev interface. But that is untested.
Since the fb helpers .gamma_set and .gamma_get are obsolete,
remove the dead code.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-10-peda@axentia.se
Peter Rosin [Thu, 13 Jul 2017 16:25:32 +0000 (18:25 +0200)]
drm: gma500: remove dead code and pointless local lut storage
The redundant fb helpers .gamma_set and .gamma_get are no longer
used. Remove the dead code and hook up the crtc .gamma_set
to use the crtc gamma_store directly instead of duplicating that
info locally.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-9-peda@axentia.se
Peter Rosin [Thu, 13 Jul 2017 16:25:31 +0000 (18:25 +0200)]
drm: cirrus: remove dead code and pointless local lut storage
The redundant fb helpers .load_lut, .gamma_set and .gamma_get are
no longer used. Remove the dead code and hook up the crtc .gamma_set
to use the crtc gamma_store directly instead of duplicating that
info locally.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-8-peda@axentia.se
Peter Rosin [Thu, 13 Jul 2017 16:25:30 +0000 (18:25 +0200)]
drm: ast: remove dead code and pointless local lut storage
The redundant fb helpers .load_lut, .gamma_set and .gamma_get are
no longer used. Remove the dead code and hook up the crtc .gamma_set
to use the crtc gamma_store directly instead of duplicating that
info locally.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-7-peda@axentia.se
Peter Rosin [Thu, 13 Jul 2017 16:25:29 +0000 (18:25 +0200)]
drm: armada: remove dead empty functions
The redundant fb helpers .gamma_set and .gamma_get are no longer used.
Remove the dead code.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-6-peda@axentia.se
Peter Rosin [Thu, 13 Jul 2017 16:25:28 +0000 (18:25 +0200)]
drm: amd: remove dead code and pointless local lut storage
The redundant fb helpers .load_lut, .gamma_set and .gamma_get are
no longer used. Remove the dead code and hook up the crtc .gamma_set
to use the crtc gamma_store directly instead of duplicating that
info locally.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Rosin <peda@axentia.se>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-5-peda@axentia.se
Mark yao [Tue, 1 Aug 2017 08:11:43 +0000 (16:11 +0800)]
drm/rockchip: fix race with kms hotplug and fbdev
According to the kerneldoc[0], should do fbdev setup before calling
drm_kms_helper_poll_init(), otherwise, Kms hotplug event may race
into fbdev helper initial, and fb_helper->dev may be NULL pointer,
that would cause the bug:
[ 0.735411] [
00000200] *pgd=
00000000f6ffe003, *pud=
00000000f6ffe003, *pmd=
0000000000000000
[ 0.736156] Internal error: Oops:
96000005 [#1] PREEMPT SMP
[ 0.736648] Modules linked in:
[ 0.736930] CPU: 2 PID: 20 Comm: kworker/2:0 Not tainted 4.4.41 #20
[ 0.737480] Hardware name: Rockchip RK3399 Board rev2 (BOX) (DT)
[ 0.738020] Workqueue: events cdn_dp_pd_event_work
[ 0.738447] task:
ffffffc0f21f3100 ti:
ffffffc0f2218000 task.ti:
ffffffc0f2218000
[ 0.739109] PC is at mutex_lock+0x14/0x44
[ 0.739469] LR is at drm_fb_helper_hotplug_event+0x30/0x114
[ 0.756253] [<
ffffff8008a344f4>] mutex_lock+0x14/0x44
[ 0.756260] [<
ffffff8008445708>] drm_fb_helper_hotplug_event+0x30/0x114
[ 0.756271] [<
ffffff8008473c84>] rockchip_drm_output_poll_changed+0x18/0x20
[ 0.756280] [<
ffffff8008439fcc>] drm_kms_helper_hotplug_event+0x28/0x34
[ 0.756286] [<
ffffff800846c444>] cdn_dp_pd_event_work+0x394/0x3c4
[ 0.756295] [<
ffffff80080b2b38>] process_one_work+0x218/0x3e0
[ 0.756302] [<
ffffff80080b3538>] worker_thread+0x2e8/0x404
[ 0.756308] [<
ffffff80080b7e70>] kthread+0xe8/0xf0
[ 0.756316] [<
ffffff8008082690>] ret_from_fork+0x10/0x40
[0]: https://01.org/linuxgraphics/gfx-docs/drm/gpu/drm-kms-helpers.html
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Reviewed-by: Sandy huang <sandy.huang@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1501575103-20136-1-git-send-email-mark.yao@rock-chips.com
Mark yao [Mon, 31 Jul 2017 09:49:55 +0000 (17:49 +0800)]
drm/rockchip: vop: report error when check resource error
The user would be confused while facing a error commit without
any error report.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Reviewed-by: Sandy huang <sandy.huang@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1501494596-7090-1-git-send-email-mark.yao@rock-chips.com
Mark yao [Mon, 31 Jul 2017 09:49:50 +0000 (17:49 +0800)]
drm/rockchip: vop: round_up pitches to word align
VOP pitch register is word align, need align to word.
VOP_WIN0_VIR:
bit[31:16] win0_vir_stride_uv
Number of words of Win0 uv Virtual width
bit[15:0] win0_vir_width
Number of words of Win0 yrgb Virtual width
ARGB888 : win0_vir_width
RGB888 : (win0_vir_width*3/4) + (win0_vir_width%3)
RGB565 : ceil(win0_vir_width/2)
YUV : ceil(win0_vir_width/4)
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Reviewed-by: Sandy huang <sandy.huang@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1501494591-7034-1-git-send-email-mark.yao@rock-chips.com
Mark yao [Mon, 31 Jul 2017 09:49:46 +0000 (17:49 +0800)]
drm/rockchip: vop: fix NV12 video display error
fixup the scale calculation formula on the case
src_height == (dst_height/2).
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Reviewed-by: Sandy huang <sandy.huang@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1501494586-6984-1-git-send-email-mark.yao@rock-chips.com
Mark yao [Mon, 31 Jul 2017 09:49:42 +0000 (17:49 +0800)]
drm/rockchip: vop: fix iommu page fault when resume
Iommu would get page fault with following path:
vop_disable:
1, disable all windows and set vop config done
2, vop enter to standy, all windows not works, but their registers
are not clean, when you read window's enable bit, may found the
window is enable.
vop_enable:
1, memcpy(vop->regsbak, vop->regs, len)
save current vop registers to vop->regsbak, then you can found
window is enable on regsbak.
2, VOP_WIN_SET(vop, win, gate, 1);
force enable window gate, but gate and enable are on same
hardware register, then window enable bit rewrite to vop hardware.
3, vop power on, and vop might try to scan destroyed buffer,
then iommu get page fault.
Move windows disable after vop regsbak restore, then vop regsbak mechanism
would keep tracing the modify, everything would be safe.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Reviewed-by: Sandy huang <sandy.huang@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1501494582-6934-1-git-send-email-mark.yao@rock-chips.com
Mark yao [Mon, 31 Jul 2017 09:49:37 +0000 (17:49 +0800)]
drm/rockchip: vop: no need wait vblank on crtc enable
Since atomic framework, crtc enable and disable are in pairs,
no need to wait vblank.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Reviewed-by: Sandy huang <sandy.huang@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1501494577-6884-1-git-send-email-mark.yao@rock-chips.com
Arvind Yadav [Tue, 1 Aug 2017 16:01:56 +0000 (21:31 +0530)]
agp: nvidia: constify pci_device_id.
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Arvind Yadav [Tue, 1 Aug 2017 16:01:55 +0000 (21:31 +0530)]
agp: amd64: constify pci_device_id.
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Arvind Yadav [Tue, 1 Aug 2017 16:01:54 +0000 (21:31 +0530)]
agp: sis: constify pci_device_id.
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Arvind Yadav [Tue, 1 Aug 2017 16:01:53 +0000 (21:31 +0530)]
agp: efficeon: constify pci_device_id.
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Arvind Yadav [Tue, 1 Aug 2017 16:01:52 +0000 (21:31 +0530)]
agp: ati: constify pci_device_id.
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Arvind Yadav [Tue, 1 Aug 2017 16:01:51 +0000 (21:31 +0530)]
agp: ali: constify pci_device_id.
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Arvind Yadav [Tue, 1 Aug 2017 16:01:50 +0000 (21:31 +0530)]
agp: intel: constify pci_device_id.
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Arvind Yadav [Tue, 1 Aug 2017 16:01:49 +0000 (21:31 +0530)]
agp: amd-k7: constify pci_device_id.
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Arvind Yadav [Tue, 1 Aug 2017 16:01:48 +0000 (21:31 +0530)]
agp: uninorth: constify pci_device_id.
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Fri, 4 Aug 2017 01:42:34 +0000 (11:42 +1000)]
Merge branch 'topic-arcpgu-updates' of https://github.com/foss-for-synopsys-dwc-arc-processors/linux into drm-next
arcgpu minor updates.
* 'topic-arcpgu-updates' of https://github.com/foss-for-synopsys-dwc-arc-processors/linux:
drm: arcpgu: Allow some clock deviation in crtc->mode_valid() callback
drm: arcpgu: Fix module unload
drm: arcpgu: Fix mmap() callback
arcpgu: Simplify driver name
drm/arcpgu: Opt in debugfs
Dave Airlie [Fri, 4 Aug 2017 01:41:24 +0000 (11:41 +1000)]
Merge tag 'drm-next-du-
20170803' of git://linuxtv.org/pinchartl/media into drm-next
rcar-du updates, contains vsp1 updates as well.
* tag 'drm-next-du-
20170803' of git://linuxtv.org/pinchartl/media: (24 commits)
drm: rcar-du: Use new iterator macros
drm: rcar-du: Repair vblank for DRM page flips using the VSP
drm: rcar-du: Fix race condition when disabling planes at CRTC stop
drm: rcar-du: Wait for flip completion instead of vblank in commit tail
drm: rcar-du: Use the VBK interrupt for vblank events
drm: rcar-du: Add HDMI outputs to R8A7796 device description
drm: rcar-du: Remove an unneeded NULL check
drm: rcar-du: Setup planes before enabling CRTC to avoid flicker
drm: rcar-du: Configure DPAD0 routing through last group on Gen3
drm: rcar-du: Restrict DPLL duty cycle workaround to H3 ES1.x
drm: rcar-du: Support multiple sources from the same VSP
drm: rcar-du: Fix comments to comply with the kernel coding style
drm: rcar-du: Use of_graph_get_remote_endpoint()
v4l: vsp1: Add support for header display lists in continuous mode
v4l: vsp1: Add support for multiple DRM pipelines
v4l: vsp1: Add support for multiple LIF instances
v4l: vsp1: Add support for new VSP2-BS, VSP2-DL and VSP2-D instances
v4l: vsp1: Add support for the BRS entity
v4l: vsp1: Add pipe index argument to the VSP-DU API
v4l: vsp1: Don't create links for DRM pipeline
...
Praveen Paneri [Thu, 3 Aug 2017 17:32:10 +0000 (23:02 +0530)]
drm/i915: enable WaDisableDopClkGating for skl
This WA is required when decoupled frequencies for slice and unslice
are enabled. This disables DOP clock gating for skl.
v2: enable the WA for all gen9 platforms (not just for SKL GT4 where
the hang issue is originally reported) to avoid rare hangs (David)
v3: as per WaDatabase, enable it only for SKL (Rodrigo)
Cc: David Weinehall <david.weinehall@linux.intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Signed-off-by: Praveen Paneri <praveen.paneri@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1501781530-8186-1-git-send-email-praveen.paneri@intel.com
Rodrigo Vivi [Mon, 31 Jul 2017 18:52:20 +0000 (11:52 -0700)]
drm/i915: Fix PCH names for KBP and CNP.
No functional change.
KBP was based on SPT and spec wasn't clear about the full name.
There was the initial point of the "Point" confusion.
Later the split with Coffee Lake and Cannon Lake both using CNP
and also some uncertainty from the specs we had at that time
made us to propagated the mistake along.
So, let's fix this now and avoid propagating these wrong
"points".
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170731185220.758-1-rodrigo.vivi@intel.com
David Lechner [Thu, 3 Aug 2017 16:19:08 +0000 (11:19 -0500)]
drm/fb-helper: add new drm_setup_crtcs_fb() function
This adds a new drm_setup_crtcs_fb() function to handle the parts of
drm_setup_crtcs() that touch fb_helper->fb and fb_helper->fbdev. When
drm_setup_crtcs() is called during initialization, these fields are NULL
because they have not been allocated yet.
There is currently a hack at the end of drm_fb_helper_single_fb_probe()
that sets fb_helper->fb, so it is moved to the new drm_setup_crtcs_fb()
function.
This is also done in preparation for addition setup that requires access
to fb_helper->fbdev.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1501777149-8310-2-git-send-email-david@lechnology.com
Lionel Landwerlin [Thu, 3 Aug 2017 17:05:50 +0000 (18:05 +0100)]
drm/i915/perf: Implement I915_PERF_ADD/REMOVE_CONFIG interface
The motivation behind this new interface is expose at runtime the
creation of new OA configs which can be used as part of the i915 perf
open interface. This will enable the kernel to learn new configs which
may be experimental, or otherwise not part of the core set currently
available through the i915 perf interface.
v2: Drop DRM_ERROR for userspace errors (Matthew)
Add padding to userspace structure (Matthew)
s/guid/uuid/ (Matthew)
v3: Use u32 instead of int to iterate through registers (Matthew)
v4: Lock access to dynamic config list (Lionel)
v5: by Matthew:
Fix uninitialized error values
Fix incorrect unwiding when opening perf stream
Use kmalloc_array() to store register
Use uuid_is_valid() to valid config uuids
Declare ioctls as write only
Check padding members are set to 0
by Lionel:
Return ENOENT rather than EINVAL when trying to remove non
existing config
v6: by Chris:
Use ref counts for OA configs
Store UUID in drm_i915_perf_oa_config rather then using pointer
Shuffle fields of drm_i915_perf_oa_config to avoid padding
v7: by Chris
Rename uapi pointers fields to end with '_ptr'
v8: by Andrzej, Marek, Sebastian
Update register whitelisting
by Lionel
Add more register names for documentation
Allow configuration programming in non-paranoid mode
Add support for value filter for a couple of registers already
programmed in other part of the kernel
v9: Documentation fix (Lionel)
Allow writing WAIT_FOR_RC6_EXIT only on Gen8+ (Andrzej)
v10: Perform read access_ok() on register pointers (Lionel)
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Andrzej Datczuk <andrzej.datczuk@intel.com>
Reviewed-by: Andrzej Datczuk <andrzej.datczuk@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170803165812.2373-2-lionel.g.landwerlin@intel.com
Lionel Landwerlin [Thu, 3 Aug 2017 16:58:11 +0000 (17:58 +0100)]
drm/i915: reorder NOA register definition to follow addresses
It makes things easier to read when implementing whitelisting in the
following patches.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170803165812.2373-6-lionel.g.landwerlin@intel.com
Lionel Landwerlin [Thu, 3 Aug 2017 16:58:10 +0000 (17:58 +0100)]
drm/i915/perf: disable NOA logic when not used
We already do it on Haswell and the documentation says it saves power.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170803165812.2373-5-lionel.g.landwerlin@intel.com
Lionel Landwerlin [Thu, 3 Aug 2017 16:58:09 +0000 (17:58 +0100)]
drm/i915/perf: leave GDT_CHICKEN_BITS programming in configs
There will be a need for userspaces configurations to set this
register. We can apply the same model inside the kernel for test
configs.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170803165812.2373-4-lionel.g.landwerlin@intel.com
Lionel Landwerlin [Thu, 3 Aug 2017 16:58:08 +0000 (17:58 +0100)]
drm/i915/perf: prune OA configs
In the following commit we'll introduce loadable userspace
configs. This change reworks how configurations are handled in the
perf driver and retains only the test configurations in kernel space.
We now store the test config in dev_priv and resolve the id only once
when opening the perf stream. The OA config is then handled through a
pointer to the structure holding the configuration details.
v2: Rework how test configs are handled (Lionel)
v3: Use u32 to hold number of register (Matthew)
v4: Removed unused dev_priv->perf.oa.current_config variable (Matthew)
v5: Lock device when accessing exclusive_stream (Lionel)
v6: Ensure OACTXCONTROL is always reprogrammed (Lionel)
v7: Switch a couple of index variable from int to u32 (Matthew)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170803165812.2373-3-lionel.g.landwerlin@intel.com