OSDN Git Service
Somnath Kotur [Thu, 31 Aug 2017 03:57:32 +0000 (09:27 +0530)]
bnxt_re: Fix race between the netdev register and unregister events
Upon receipt of the NETDEV_REGISTER event from the netdev notifier chain,
the IB stack registration is spawned off to a workqueue since that also
requires an rtnl lock.
There could be 2 kinds of races between the NETDEV_REGISTER and the
NETDEV_UNREGISTER event handling.
a)The NETDEV_UNREGISTER event is received in rapid succession after
the NETDEV_REGISTER event even before the work queue got a chance to run.
b)The NETDEV_UNREGISTER event is received while the workqueue that handles
registration with the IB stack is still in progress.
Handle both the races with a bit flag that is set just before the work item
is queued and cleared in the workqueue after the event is handled just
before the workqueue item is freed.
While adding the new flag, it was noted that the flags are all used in
*_bit() operations which expect a bit number and not a literal constant
with a bit set. So change the numbers to be bit numbers.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Somnath Kotur [Thu, 31 Aug 2017 03:57:31 +0000 (09:27 +0530)]
bnxt_re: Free up devices in module_exit path
Clean up all devices added to the bnxt_re_dev_list in the
module_exit entry point.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Devesh Sharma [Thu, 31 Aug 2017 03:57:30 +0000 (09:27 +0530)]
bnxt_re: Fix compare and swap atomic operands
Driver must assign the user supplied compare/swap values in
the wqe to successfully complete the atomic compare and
swap operation.
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Somnath Kotur [Thu, 31 Aug 2017 03:57:29 +0000 (09:27 +0530)]
bnxt_re: Stop issuing further cmds to FW once a cmd times out
Once a cmd to FW times out(after 20s) it is reasonable to
assume the FW or atleast the control path is dead.
No point issuing further cmds to the FW as each subsequent cmd
with another 20s timeout will cascade resulting in unnecessary
traces and/or NMI Lockups.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Devesh Sharma [Thu, 31 Aug 2017 03:57:28 +0000 (09:27 +0530)]
bnxt_re: Fix update of qplib_qp.mtu when modified
The MTU value in the qplib_qp.mtu should be
consistent with whatever mtu was set during
INIT to RTR.The Next PSN and number of packets
are calculated based on this member in the qplib_qp structure.
Signed-off-by: Narender Reddy <narender.reddy@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Helge Deller [Thu, 21 Sep 2017 19:52:08 +0000 (21:52 +0200)]
parisc: Add HWPOISON page fault handler code
Commit
24587380f61d ("parisc: Add MADV_HWPOISON and MADV_SOFT_OFFLINE") added
the necessary constants to handle hardware-poisoning. Those were needed to
support the page deallocation feature from firmware.
But I completely missed to add the relevant fault handler code. This now
showed up when I ran the madvise07 testcase from the Linux Test Project,
which failed with a kernel BUG at arch/parisc/mm/fault.c:320.
With this patch the parisc kernel now behaves like other platforms and
gives the same kernel syslog warnings when poisoning pages.
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Thu, 21 Sep 2017 19:22:27 +0000 (21:22 +0200)]
parisc: Move init_per_cpu() into init section
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Mon, 18 Sep 2017 15:55:24 +0000 (17:55 +0200)]
parisc: Check if initrd was loaded into broken RAM
While scanning the PDT for reported broken memory modules, warn if the
initrd was coincidentally loaded into bad memory.
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Sun, 17 Sep 2017 19:28:11 +0000 (21:28 +0200)]
parisc: Add PDCE_CHECK instruction to HPMC handler
According to the programming note at page 1-31 of the PA 1.1 Firmware
Architecture document, one should use the PDC_INSTR firmware function to
get the instruction that invokes a PDCE_CHECK in the HPMC handler. This
patch follows this note and sets the instruction which has been a nop up
until now.
Testing on a C3000 and C8000 showed that this firmware call isn't
implemented on those machines, so maybe it's only needed on older ones.
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Sun, 17 Sep 2017 19:15:09 +0000 (21:15 +0200)]
parisc: Add wrapper for pdc_instr() firmware function
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Sun, 17 Sep 2017 19:17:10 +0000 (21:17 +0200)]
parisc: Move start_parisc() into init section
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Sun, 17 Sep 2017 19:05:02 +0000 (21:05 +0200)]
parisc: Stop unwinding at start of stack
Check stack pointer if we are reaching the stack end and stop unwinding
if we do. This fixes early backtraces and avoids showing unrealistic
call stacks.
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Mon, 11 Sep 2017 19:41:43 +0000 (21:41 +0200)]
parisc: Fix too large frame size warnings
The parisc architecture has larger stack frames than most other
architectures on 32-bit kernels.
Increase the maximum allowed stack frame to 1280 bytes for parisc to
avoid warnings in the do_sys_poll() and pat_memconfig() functions.
Signed-off-by: Helge Deller <deller@gmx.de>
Shiraz Saleem [Tue, 19 Sep 2017 14:19:13 +0000 (09:19 -0500)]
i40iw: Add support for port reuse on active side connections
During OpenMPI scale up testing, we observe rdma_connect
failures if ports are reused on multiple connections.
This is because the Control Queue-Pair (CQP) command to add
the reused port to Accelerated Port Bit VectorTable (APBVT)
fails as there already exists an entry.
Check for duplicate port before invoking the CQP command
to add APBVT entry and delete the entry only if the port
is not in use.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Mustafa Ismail [Tue, 19 Sep 2017 14:19:12 +0000 (09:19 -0500)]
i40iw: Add missing VLAN priority
Set the VLAN priority which is in the upper 3 bits of the VLAN
tag field in the QP context.
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Shiraz Saleem [Tue, 19 Sep 2017 14:19:11 +0000 (09:19 -0500)]
i40iw: Call i40iw_cm_disconn on modify QP to disconnect
If QP modify to closing/terminate/error fails, connection is
not torn down as there is no corresponding asynchronous
event that will initiate the teardown.
Add explicit call to i40iw_cm_disconn if not waiting in
modify QP, otherwise schedule it in CM timer.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Shiraz Saleem [Tue, 19 Sep 2017 14:19:10 +0000 (09:19 -0500)]
i40iw: Prevent multiple netdev event notifier registrations
Netdev event notifier registration/de-registration is not
synchronized with a lock and there is a possibility of a
duplicate registration of notifier before the unregister
completes.
Register netdev event notifiers during module init and
de-register them at module exit.
This avoids the need to tie the registration to first netdev
client interface open and de-registration to last client
interface close and the synchronization to achieve it.
This also fixes a crash due to duplicate registration.
BUG: unable to handle kernel paging request at
ffffffffa0d60388
IP: [<
ffffffff8160f75d>] notifier_call_chain+0x3d/0x70
PGD
190d067 PUD
190e063 PMD
76c840067 PTE 0
Oops: 0000 [#1] SMP
Modules linked in: i40e(OF-) fuse btrfs zlib_deflate raid6_pq xor vfat msdos
[..]
e1000e vxlan ip_tunnel ptp pps_core i2c_core video [last unloaded: i40iw]
CPU: 1 PID: 27101 Comm: modprobe Tainted: GF W O-------------- 3.10.0-229.el7.x86_64 #1
Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./Q87M-D2H, BIOS F7 01/17/2014
task:
ffff88076e8a96c0 ti:
ffff8806959c8000 task.ti:
ffff8806959c8000
RIP: 0010:[<
ffffffff8160f75d>] [<
ffffffff8160f75d>] notifier_call_chain+0x3d/0x70
RSP: 0018:
ffff8806959cbb38 EFLAGS:
00010282
RAX:
ffffffffa0d60380 RBX:
00000000fffffffd RCX:
0000000000000000
0708] RDX:
0000000000000000 RSI:
ffff88081227a000 RDI:
0000000000000002
RBP:
ffff8806959cbb60 R08:
0000000000000246 R09:
000000000000700c
R10:
ffff88080e16ea40 R11:
00000000000ae8df R12:
ffffffffa0d60380
R13:
0000000000000002 R14:
ffff88076e738800 R15:
0000000000000000
FS:
00007f604ef4a740(0000) GS:
ffff88083e240000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
ffffffffa0d60388 CR3:
0000000753cd2000 CR4:
00000000001407e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000ffff0ff0 DR7:
0000000000000400
Stack:
ffffffff819e73a0 0000000000000000 0000000000000002 ffff88076e738800
00000000ffffffff ffff8806959cbba0 ffffffff8109d61d 0000000000000000
0000000000000000 ffff88076e738800 0000000000000000 ffff88076e738800
Call Trace:
[<
ffffffff8109d61d>] __blocking_notifier_call_chain+0x4d/0x70
[<
ffffffff8109d656>] blocking_notifier_call_chain+0x16/0x20
[<
ffffffff8156b9e4>] __inet_del_ifa+0x154/0x2b0
[<
ffffffff8156d102>] inetdev_event+0x182/0x530
[<
ffffffff8160f76c>] notifier_call_chain+0x4c/0x70
[<
ffffffff8109d446>] raw_notifier_call_chain+0x16/0x20
[<
ffffffff814f71fd>] call_netdevice_notifiers+0x2d/0x60
[<
ffffffff814f8845>] rollback_registered_many+0x105/0x220
[<
ffffffff814f89a0>] rollback_registered+0x40/0x70
[<
ffffffff814f9c88>] unregister_netdevice_queue+0x48/0x80
[<
ffffffff814f9cdc>] unregister_netdev+0x1c/0x30
[<
ffffffffa0067139>] i40e_vsi_release+0x2a9/0x2b0 [i40e]
[<
ffffffffa00674e8>] i40e_remove+0x128/0x2b0 [i40e]
[<
ffffffff813092db>] pci_device_remove+0x3b/0xb0
[<
ffffffff813d26ef>] __device_release_driver+0x7f/0xf0
[<
ffffffff813d3068>] driver_detach+0xb8/0xc0
[<
ffffffff813d22db>] bus_remove_driver+0x9b/0x120
[<
ffffffff813d36dc>] driver_unregister+0x2c/0x50
[<
ffffffff81307d4c>] pci_unregister_driver+0x2c/0x90
[<
ffffffffa008f9d0>] i40e_exit_module+0x10/0x23 [i40e]
[<
ffffffff810dad0b>] SyS_delete_module+0x16b/0x2d0
[<
ffffffff81013b0c>] ? do_notify_resume+0x9c/0xb0
[<
ffffffff81613da9>] system_call_fastpath+0x16/0x1b
Code: e5 41 57 4d 89 c7 41 56 49 89 d6 41 55 49 89 f5 41 54 53 89 cb
75 14 eb 3d 0f 1f 44 00 00 83 eb 01 74 25 4d 85 e4 74 20 4c 89 e0 <4c>
8b 60 08 4c 89 f2 4c 89 ee 48 89 c7 ff 10 4d 85 ff 74 04 41
RIP [<
ffffffff8160f75d>] notifier_call_chain+0x3d/0x70
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Shiraz Saleem [Tue, 19 Sep 2017 14:19:09 +0000 (09:19 -0500)]
i40iw: Fail open if there are no available MSI-X vectors
Check number of available MSI-X vectors for i40iw.
If there are no available vectors, fail the open.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Adit Ranadive [Thu, 21 Sep 2017 22:56:21 +0000 (15:56 -0700)]
RDMA/vmw_pvrdma: Fix reporting correct opcodes for completion
Since the IB_WC_BIND_MW opcode has been dropped, set the correct
IB WC opcode explicitly.
Fixes:
29c8d9eba550 ("IB: Add vmw_pvrdma driver")
Reviewed-by: Aditya Sarwade <asarwade@vmware.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Adit Ranadive <aditr@vmware.com>
Signed-off-by: Bryan Tan <bryantan@vmware.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Leon Romanovsky [Tue, 19 Sep 2017 10:22:13 +0000 (13:22 +0300)]
IB/bnxt_re: Fix frame stack compilation warning
Reduce stack size by dynamically allocating memory instead
of declaring large struct on the stack:
drivers/infiniband/hw/bnxt_re/ib_verbs.c: In function ‘bnxt_re_query_qp’:
drivers/infiniband/hw/bnxt_re/ib_verbs.c:1600:1: warning: the frame size of 1216 bytes is larger than 1024 bytes [-Wframe-larger-than=]
}
^
Cc: Selvin Xavier <selvin.xavier@broadcom.com>
Fixes:
1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Sudip Mukherjee [Mon, 18 Sep 2017 11:28:48 +0000 (12:28 +0100)]
IB/mlx5: fix debugfs cleanup
If delay_drop_debugfs_init() fails in any of the operations to create
debugfs, it is calling delay_drop_debugfs_cleanup() as part of its
cleanup. But delay_drop_debugfs_cleanup() checks for 'dbg' and since
we have not yet pointed 'dbg' to the debugfs we need to cleanup, the
cleanup fails and we are left with stray debugfs elements and also a
memory leak.
Fixes:
4a5fd5d2965c ("IB/mlx5: Add necessary delay drop assignment")
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Colin Ian King [Mon, 11 Sep 2017 16:03:13 +0000 (17:03 +0100)]
IB/ocrdma: fix incorrect fall-through on switch statement
In the case where mbox_status is OCRDMA_MBX_STATUS_FAILED and
add_status is OCRDMA_MBX_STATUS_FAILED err_num is assigned -EAGAIN
however the case OCRDMA_MBX_STATUS_FAILED is missing a break and
falls through to the default case which then re-assigns err_num
to -EFAULT. Fix this so that err_num is assigned to -EAGAIN
for the add_status OCRDMA_MBX_STATUS_FAILED case and -EFAULT
otherwise.
Detected by CoverityScan CID#703125 ("Missing break in switch")
Fixes:
fe2caefcdf58 ("RDMA/ocrdma: Add driver for Emulex OneConnect IBoE RDMA adapter")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Santosh Shilimkar [Thu, 7 Sep 2017 10:38:18 +0000 (13:38 +0300)]
IB/ipoib: Suppress the retry related completion errors
IPoIB doesn't support transport/rnr retry schemes as per
RFC so those errors are expected. No need to flood the
log files with them.
Tested-by: Michael Nowak <michael.nowak@oracle.com>
Tested-by: Rafael Alejandro Peralez <rafael.peralez@oracle.com>
Tested-by: Liwen Huang <liwen.huang@oracle.com>
Tested-by: Hong Liu <hong.x.liu@oracle.com>
Reviewed-by: Mukesh Kacker <mukesh.kacker@oracle.com>
Reported-by: Rajiv Raja <rajiv.raja@oracle.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
KT Liao [Fri, 22 Sep 2017 17:00:57 +0000 (10:00 -0700)]
Input: elan_i2c - extend Flash-Write delay
The original 20ms delay is only marginally enough delay after a block write
operation during firmware update. Let's increase the delay to ensure that
the controller finishes up storing the page to avoid failures in the
firmware updates.
Signed-off-by: KT Liao <kt.liao@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Steve Wise [Tue, 5 Sep 2017 18:52:34 +0000 (11:52 -0700)]
iw_cxgb4: remove the stid on listen create failure
If a listen create fails, then the server tid (stid) is incorrectly left
in the stid idr table, which can cause a touch-after-free if the stid
is looked up and the already freed endpoint is touched. So make sure
and remove it in the error path.
Cc: stable@vger.kernel.org
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Steve Wise [Tue, 5 Sep 2017 18:52:33 +0000 (11:52 -0700)]
iw_cxgb4: drop listen destroy replies if no ep found
If the thread waiting for a CLOSE_LISTSRV_RPL times out and bails,
then we need to handle a subsequent CPL if it arrives and the stid has
been released. In this case silently drop it.
Cc: stable@vger.kernel.org
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Steve Wise [Wed, 13 Sep 2017 16:52:32 +0000 (09:52 -0700)]
iw_cxgb4: put ep reference in pass_accept_req()
The listening endpoint should always be dereferenced at the end of
pass_accept_req().
Fixes:
f86fac79afec ("RDMA/iw_cxgb4: atomic find and reference for listening endpoints")
Cc: stable@vger.kernel.org
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Linus Torvalds [Fri, 22 Sep 2017 16:40:47 +0000 (06:40 -1000)]
Merge tag 'for-linus-4.14b-rc2-tag' of git://git./linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"A fix for a missing __init annotation and two cleanup patches"
* tag 'for-linus-4.14b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen, arm64: drop dummy lookup_address()
xen: don't compile pv-specific parts if XEN_PV isn't configured
xen: x86: mark xen_find_pt_base as __init
Linus Torvalds [Fri, 22 Sep 2017 16:39:09 +0000 (06:39 -1000)]
Merge tag 'powerpc-4.14-3' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"It turns out our single-fix pull from last week was too good to be
true. I missed a few fixes in that pull that had already come in
because I was on leave, but also we hadn't found the bugs yet. So this
week it's a bit bigger, though not ridiculous. Hopefully things will
settle down from here on.
Four fixes for the new instruction emulation code. A fix for CPU
offline on bare metal machines when certain idle states are not
supported, and a fix for a device_node refcounting oops during CPU
hotplug, caused by recent changes.
Going to stable are a fix for an oops during core dump on machines
that have TM (Transactional Memory) disabled. Reordering some EEH
initialisation to avoid trashing memory, and another device_node
refcounting fix.
And a few other minor things.
Thanks to: Anton Blanchard, Benjamin Herrenschmidt, Cyril Bur, Gautham
R. Shenoy, Gustavo Romero, Kamalesh Babulal, Matthew Weber, Matt Weber,
Naveen N. Rao, Nicholas Piggin, Pavithra Prakash, Ravi Bangoria, Ronak
Desai, Scott Wood, Tyrel Datwyler"
* tag 'powerpc-4.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries: Fix parent_dn reference leak in add_dt_node()
powerpc/pseries: Fix "OF: ERROR: Bad of_node_put() on /cpus" during DLPAR
powerpc/eeh: Create PHB PEs after EEH is initialized
powerpc/kprobes: Update optprobes to use emulate_update_regs()
powerpc/powernv: Clear LPCR[PECE1] via stop-api only for deep state offline
powerpc/sstep: mullw should calculate a 64 bit signed result
powerpc/sstep: Fix issues with mcrf
powerpc/sstep: Fix issues with set_cr0()
powerpc/tm: Flush TM only if CPU has TM feature
powerpc/sysrq: Fix oops whem ppmu is not registered
powerpc/configs: Update for CONFIG_SND changes
powerpc/e6500: Update machine check for L1D cache err
Linus Torvalds [Fri, 22 Sep 2017 16:37:50 +0000 (06:37 -1000)]
Merge branch '4.14-fixes' of git://git.linux-mips.org/ralf/upstream-linus
Pull MIPS fixes from Ralf Baechle:
- Fix a build error on MSP71xx which used to rely on somehow magically
<asm/setup.h> being pulled in which no longer happens.
- Fix the __write_64bit_c0_split inline assembler where there was the
theoretical possibility of GCC interpret the constraints such that
bad code could result.
- A __init was causing section mismatch errors on Alchemy. Just to be
on the safe side, Manuel's patch does away with all of them.
- Fix perf event init.
* '4.14-fixes' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: PCI: fix pcibios_map_irq section mismatch
MIPS: Fix input modify in __write_64bit_c0_split()
MIPS: MSP71xx: Include asm/setup.h
MIPS: Fix perf event init
Linus Torvalds [Fri, 22 Sep 2017 16:32:07 +0000 (06:32 -1000)]
Merge branch 'for-linus' of git://git./linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
- A couple of bug fixes: memory management, perf, cio, dasd and
scm_blk.
- A larger change in regard to the CPU topology to improve performance
for systems running under z/VM or KVM.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/topology: enable / disable topology dynamically
s390/topology: alternative topology for topology-less machines
s390/mm: fix write access check in gup_huge_pmd()
s390/mm: make pmdp_invalidate() do invalidation only
s390/cio: recover from bad paths
s390/scm_blk: consistently use blk_status_t as error type
s390/dasd: fix race during dasd initialization
s390/perf: fix bug when creating per-thread event
Linus Torvalds [Fri, 22 Sep 2017 16:15:27 +0000 (06:15 -1000)]
Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- Fix compiler warnings in inside-secure
- Fix LS1021A support in caam
- Avoid using RBP in x86 crypto code
- Fix bug in talitos that prevents hashing with algif
- Fix bugs talitos hashing code that cause incorrect hash result
- Fix memory freeing path bug in drbg
- Fix af_alg crash when two SG lists are chained
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: af_alg - update correct dst SGL entry
crypto: caam - fix LS1021A support on ARMv7 multiplatform kernel
crypto: inside-secure - fix gcc-4.9 warnings
crypto: talitos - Don't provide setkey for non hmac hashing algs
crypto: talitos - fix hashing
crypto: talitos - fix sha224
crypto: x86/twofish - Fix RBP usage
crypto: sha512-avx2 - Fix RBP usage
crypto: x86/sha256-ssse3 - Fix RBP usage
crypto: x86/sha256-avx2 - Fix RBP usage
crypto: x86/sha256-avx - Fix RBP usage
crypto: x86/sha1-ssse3 - Fix RBP usage
crypto: x86/sha1-avx2 - Fix RBP usage
crypto: x86/des3_ede - Fix RBP usage
crypto: x86/cast6 - Fix RBP usage
crypto: x86/cast5 - Fix RBP usage
crypto: x86/camellia - Fix RBP usage
crypto: x86/blowfish - Fix RBP usage
crypto: drbg - fix freeing of resources
Alex Estrin [Thu, 31 Aug 2017 16:30:34 +0000 (09:30 -0700)]
IB/core: Fix for core panic
Build with the latest patches resulted in panic:
11384.486289] BUG: unable to handle kernel NULL pointer dereference at
(null)
[11384.486293] IP: (null)
[11384.486295] PGD 0
[11384.486295] P4D 0
[11384.486296]
[11384.486299] Oops: 0010 [#1] SMP
......... snip ......
[11384.486401] CPU: 0 PID: 968 Comm: kworker/0:1H Tainted: G W O
4.13.0-a-stream-
20170825 #1
[11384.486402] Hardware name: Intel Corporation S2600WT2R/S2600WT2R,
BIOS SE5C610.86B.01.01.0014.
121820151719 12/18/2015
[11384.486418] Workqueue: ib-comp-wq ib_cq_poll_work [ib_core]
[11384.486419] task:
ffff880850579680 task.stack:
ffffc90007fec000
[11384.486420] RIP: 0010: (null)
[11384.486420] RSP: 0018:
ffffc90007fef970 EFLAGS:
00010206
[11384.486421] RAX:
ffff88084cfe8000 RBX:
ffff88084dce4000 RCX:
ffffc90007fef978
[11384.486422] RDX:
0000000000000000 RSI:
0000000000000001 RDI:
ffff88084cfe8000
[11384.486422] RBP:
ffffc90007fefab0 R08:
0000000000000000 R09:
ffff88084dce4080
[11384.486423] R10:
ffffffffa02d7f60 R11:
0000000000000000 R12:
ffff88105af65a00
[11384.486423] R13:
ffff88084dce4000 R14:
000000000000c000 R15:
000000000000c000
[11384.486424] FS:
0000000000000000(0000) GS:
ffff88085f400000(0000)
knlGS:
0000000000000000
[11384.486425] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[11384.486425] CR2:
0000000000000000 CR3:
0000000001c09000 CR4:
00000000001406f0
[11384.486426] Call Trace:
[11384.486431] ? is_valid_mcast_lid.isra.21+0xfb/0x110 [ib_core]
[11384.486436] ib_attach_mcast+0x6f/0xa0 [ib_core]
[11384.486441] ipoib_mcast_attach+0x81/0x190 [ib_ipoib]
[11384.486443] ipoib_mcast_join_complete+0x354/0xb40 [ib_ipoib]
[11384.486448] mcast_work_handler+0x330/0x6c0 [ib_core]
[11384.486452] join_handler+0x101/0x220 [ib_core]
[11384.486455] ib_sa_mcmember_rec_callback+0x54/0x80 [ib_core]
[11384.486459] recv_handler+0x3a/0x60 [ib_core]
[11384.486462] ib_mad_recv_done+0x423/0x9b0 [ib_core]
[11384.486466] __ib_process_cq+0x5d/0xb0 [ib_core]
[11384.486469] ib_cq_poll_work+0x20/0x60 [ib_core]
[11384.486472] process_one_work+0x149/0x360
[11384.486474] worker_thread+0x4d/0x3c0
[11384.486487] kthread+0x109/0x140
[11384.486488] ? rescuer_thread+0x380/0x380
[11384.486489] ? kthread_park+0x60/0x60
[11384.486490] ? kthread_park+0x60/0x60
[11384.486493] ret_from_fork+0x25/0x30
[11384.486493] Code: Bad RIP value.
[11384.486493] Code: Bad RIP value.
[11384.486496] RIP: (null) RSP:
ffffc90007fef970
[11384.486497] CR2:
0000000000000000
[11384.486531] ---[ end trace
b1acec6fb4ff6e75 ]---
[11384.532133] Kernel panic - not syncing: Fatal exception
[11384.536541] Kernel Offset: disabled
[11384.969491] ---[ end Kernel panic - not syncing: Fatal exception
[11384.976875] sched: Unexpected reschedule of offline CPU#1!
[11384.983646] ------------[ cut here ]------------
Rdma device driver may not have implemented (*get_link_layer)()
so it can not be called directly. Should use appropriate helper function.
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Fixes:
523633359224 ("IB/core: Fix the validations of a multicast LID in attach or detach operations")
Cc: stable@kernel.org # 4.13
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Arvind Yadav [Wed, 20 Sep 2017 06:56:38 +0000 (12:26 +0530)]
drivers/perf: arm_pmu_acpi: Release memory obtained by kasprintf
Free memory region, if arm_pmu_acpi_probe is not successful.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Robin Murphy [Thu, 21 Sep 2017 10:20:58 +0000 (11:20 +0100)]
iommu/of: Remove PCI host bridge node check
of_pci_iommu_init() tries to be clever and stop its alias walk at the
device represented by master_np, in case of weird PCI topologies where
the bridge to the IOMMU and the rest of the system is not at the root.
It turns out this is a bit short-sighted, since there are plenty of
other callers of pci_for_each_dma_alias() which would also need the same
behaviour in that situation, and the only platform so far with such a
topology (Cavium ThunderX2) already solves it more generally via a PCI
quirk. As this check is effectively redundant, and returning a boolean
value as an int is a bit broken anyway, let's just get rid of it.
Reported-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Fixes:
d87beb749281 ("iommu/of: Handle PCI aliases properly")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Eric Dumazet [Thu, 21 Sep 2017 16:15:46 +0000 (09:15 -0700)]
net: prevent dst uses after free
In linux-4.13, Wei worked hard to convert dst to a traditional
refcounted model, removing GC.
We now want to make sure a dst refcount can not transition from 0 back
to 1.
The problem here is that input path attached a not refcounted dst to an
skb. Then later, because packet is forwarded and hits skb_dst_force()
before exiting RCU section, we might try to take a refcount on one dst
that is about to be freed, if another cpu saw 1 -> 0 transition in
dst_release() and queued the dst for freeing after one RCU grace period.
Lets unify skb_dst_force() and skb_dst_force_safe(), since we should
always perform the complete check against dst refcount, and not assume
it is not zero.
Bugzilla : https://bugzilla.kernel.org/show_bug.cgi?id=197005
[ 989.919496] skb_dst_force+0x32/0x34
[ 989.919498] __dev_queue_xmit+0x1ad/0x482
[ 989.919501] ? eth_header+0x28/0xc6
[ 989.919502] dev_queue_xmit+0xb/0xd
[ 989.919504] neigh_connected_output+0x9b/0xb4
[ 989.919507] ip_finish_output2+0x234/0x294
[ 989.919509] ? ipt_do_table+0x369/0x388
[ 989.919510] ip_finish_output+0x12c/0x13f
[ 989.919512] ip_output+0x53/0x87
[ 989.919513] ip_forward_finish+0x53/0x5a
[ 989.919515] ip_forward+0x2cb/0x3e6
[ 989.919516] ? pskb_trim_rcsum.part.9+0x4b/0x4b
[ 989.919518] ip_rcv_finish+0x2e2/0x321
[ 989.919519] ip_rcv+0x26f/0x2eb
[ 989.919522] ? vlan_do_receive+0x4f/0x289
[ 989.919523] __netif_receive_skb_core+0x467/0x50b
[ 989.919526] ? tcp_gro_receive+0x239/0x239
[ 989.919529] ? inet_gro_receive+0x226/0x238
[ 989.919530] __netif_receive_skb+0x4d/0x5f
[ 989.919532] netif_receive_skb_internal+0x5c/0xaf
[ 989.919533] napi_gro_receive+0x45/0x81
[ 989.919536] ixgbe_poll+0xc8a/0xf09
[ 989.919539] ? kmem_cache_free_bulk+0x1b6/0x1f7
[ 989.919540] net_rx_action+0xf4/0x266
[ 989.919543] __do_softirq+0xa8/0x19d
[ 989.919545] irq_exit+0x5d/0x6b
[ 989.919546] do_IRQ+0x9c/0xb5
[ 989.919548] common_interrupt+0x93/0x93
[ 989.919548] </IRQ>
Similarly dst_clone() can use dst_hold() helper to have additional
debugging, as a follow up to commit
44ebe79149ff ("net: add debug
atomic_inc_not_zero() in dst_hold()")
In net-next we will convert dst atomic_t to refcount_t for peace of
mind.
Fixes:
a4c2fd7f7891 ("net: remove DST_NOCACHE flag")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Wei Wang <weiwan@google.com>
Reported-by: Paweł Staszewski <pstaszewski@itcare.pl>
Bisected-by: Paweł Staszewski <pstaszewski@itcare.pl>
Acked-by: Wei Wang <weiwan@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geert Uytterhoeven [Thu, 21 Sep 2017 11:27:02 +0000 (13:27 +0200)]
net: phy: Fix truncation of large IRQ numbers in phy_attached_print()
Given NR_IRQS is 2048 on sparc64, and even 32784 on alpha, 3 digits is
not enough to represent interrupt numbers on all architectures. Hence
PHY interrupt numbers may be truncated during printing.
Increase the buffer size from 4 to 8 bytes to fix this.
Fixes:
5e369aefdce4818c ("net: stmmac: Delete dead code for MDIO registration")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 22 Sep 2017 01:51:19 +0000 (15:51 -1000)]
Merge branch 'libnvdimm-fixes' of git://git./linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"A crash fix and corresponding regression test enabling for the crash
scenario. The unit test for this crash is available in ndctl-v58.2.
This branch has received a build success notification from the
0day-kbuild robot over 148 configs. The fix is tagged for -stable /
backport to 4.13"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm, namespace: fix btt claim class crash
tools/testing/nvdimm: disable labels for nfit_test.1
Gabriel Fernandez [Tue, 19 Sep 2017 11:44:06 +0000 (13:44 +0200)]
dt-bindings: clk: stm32h7: fix clock-cell size
The clock-cell size is 1 on stm32h7 plaform.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Fixes:
3e4d618b0722 ("clk: stm32h7: Add stm32h743 clock driver")
Signed-off-by: Rob Herring <robh@kernel.org>
Dmitry Torokhov [Wed, 6 Sep 2017 23:22:59 +0000 (16:22 -0700)]
Input: uinput - avoid crash when sending FF request to device going away
If FF request comes in while uinput device is going away,
uinput_request_send() will fail with -ENODEV, and uinput_request_submit()
will attempt to mark the slot as unused by calling uinput_request_done().
Unfortunately in this case we haven't initialized request->done completion
yet, and we get a crash:
[ 39.402036] BUG: spinlock bad magic on CPU#1, fftest/3108
[ 39.402046] lock: 0xffff88006a93bb00, .magic:
00000000, .owner: /39, .owner_cpu:
1217155072
[ 39.402055] CPU: 1 PID: 3108 Comm: fftest Tainted: G W 4.13.0+ #15
[ 39.402059] Hardware name: LENOVO 20HQS0EG02/20HQS0EG02, BIOS N1MET37W (1.22 ) 07/04/2017
[ 39.402064]
0000000000000086 f0fad82f3ceaa120 ffff88006a93b9a0 ffffffff9de941bb
[ 39.402077]
ffff88026df8ae00 ffff88006a93bb00 ffff88006a93b9c0 ffffffff9dca62b7
[ 39.402088]
ffff88006a93bb00 ffff88006a93baf8 ffff88006a93b9e0 ffffffff9dca62e7
[ 39.402099] Call Trace:
[ 39.402112] [<
ffffffff9de941bb>] dump_stack+0x4d/0x63
[ 39.402123] [<
ffffffff9dca62b7>] spin_dump+0x97/0x9c
[ 39.402130] [<
ffffffff9dca62e7>] spin_bug+0x2b/0x2d
[ 39.402138] [<
ffffffff9dca6373>] do_raw_spin_lock+0x28/0xfd
[ 39.402147] [<
ffffffff9e3055cd>] _raw_spin_lock_irqsave+0x19/0x1f
[ 39.402154] [<
ffffffff9dca05b7>] complete+0x1d/0x48
[ 39.402162] [<
ffffffffc04f30af>] 0xffffffffc04f30af
[ 39.402167] [<
ffffffffc04f468c>] 0xffffffffc04f468c
[ 39.402177] [<
ffffffff9dd59c16>] ? __slab_free+0x22f/0x359
[ 39.402184] [<
ffffffff9dcc13e9>] ? tk_clock_read+0xc/0xe
[ 39.402189] [<
ffffffffc04f471f>] 0xffffffffc04f471f
[ 39.402195] [<
ffffffff9dc9ffe5>] ? __wake_up+0x44/0x4b
[ 39.402200] [<
ffffffffc04f3240>] ? 0xffffffffc04f3240
[ 39.402207] [<
ffffffff9e0f57f3>] erase_effect+0xa1/0xd2
[ 39.402214] [<
ffffffff9e0f58c6>] input_ff_flush+0x43/0x5c
[ 39.402219] [<
ffffffffc04f32ad>] 0xffffffffc04f32ad
[ 39.402227] [<
ffffffff9e0f174f>] input_flush_device+0x3d/0x51
[ 39.402234] [<
ffffffff9e0f69ae>] evdev_flush+0x49/0x5c
[ 39.402243] [<
ffffffff9dd62d6e>] filp_close+0x3f/0x65
[ 39.402253] [<
ffffffff9dd7dcf7>] put_files_struct+0x66/0xc1
[ 39.402261] [<
ffffffff9dd7ddeb>] exit_files+0x47/0x4e
[ 39.402270] [<
ffffffff9dc6b329>] do_exit+0x483/0x969
[ 39.402278] [<
ffffffff9dc73211>] ? recalc_sigpending_tsk+0x3d/0x44
[ 39.402285] [<
ffffffff9dc6c7a2>] do_group_exit+0x42/0xb0
[ 39.402293] [<
ffffffff9dc767e1>] get_signal+0x58d/0x5bf
[ 39.402300] [<
ffffffff9dc03701>] do_signal+0x37/0x53e
[ 39.402307] [<
ffffffff9e0f8401>] ? evdev_ioctl_handler+0xac8/0xb04
[ 39.402314] [<
ffffffff9e0f8464>] ? evdev_ioctl+0x10/0x12
[ 39.402321] [<
ffffffff9dd74cfa>] ? do_vfs_ioctl+0x42e/0x501
[ 39.402328] [<
ffffffff9dc0170e>] prepare_exit_to_usermode+0x66/0x90
[ 39.402333] [<
ffffffff9dc0181b>] syscall_return_slowpath+0xe3/0xec
[ 39.402339] [<
ffffffff9e305b7b>] int_ret_from_sys_call+0x25/0x8f
While we could solve this by simply initializing the completion earlier, we
are better off rearranging the code a bit so we avoid calling complete() on
requests that we did not send out. This patch consolidates marking request
slots as free in one place (in uinput_request_submit(), the same place
where we acquire them) and having everyone else simply signal completion
of the requests.
Fixes:
00ce756ce53a ("Input: uinput - mark failed submission requests as free")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Dmitry Torokhov [Sat, 2 Sep 2017 00:13:43 +0000 (17:13 -0700)]
Input: uinput - avoid FF flush when destroying device
Normally, when input device supporting force feedback effects is being
destroyed, we try to "flush" currently playing effects, so that the
physical device does not continue vibrating (or executing other effects).
Unfortunately this does not work well for uinput as flushing of the effects
deadlocks with the destroy action:
- if device is being destroyed because the file descriptor is being closed,
then there is noone to even service FF requests;
- if device is being destroyed because userspace sent UI_DEV_DESTROY,
while theoretically it could be possible to service FF requests,
userspace is unlikely to do so (they'd need to make sure FF handling
happens on a separate thread) even if kernel solves the issue with FF
ioctls deadlocking with UI_DEV_DESTROY ioctl on udev->mutex.
To avoid lockups like the one below, let's install a custom input device
flush handler, and avoid trying to flush force feedback effects when we
destroying the device, and instead rely on uinput to shut off the device
properly.
NMI watchdog: Watchdog detected hard LOCKUP on cpu 3
...
<<EOE>> [<
ffffffff817a0307>] _raw_spin_lock_irqsave+0x37/0x40
[<
ffffffff810e633d>] complete+0x1d/0x50
[<
ffffffffa00ba08c>] uinput_request_done+0x3c/0x40 [uinput]
[<
ffffffffa00ba587>] uinput_request_submit.part.7+0x47/0xb0 [uinput]
[<
ffffffffa00bb62b>] uinput_dev_erase_effect+0x5b/0x76 [uinput]
[<
ffffffff815d91ad>] erase_effect+0xad/0xf0
[<
ffffffff815d929d>] flush_effects+0x4d/0x90
[<
ffffffff815d4cc0>] input_flush_device+0x40/0x60
[<
ffffffff815daf1c>] evdev_cleanup+0xac/0xc0
[<
ffffffff815daf5b>] evdev_disconnect+0x2b/0x60
[<
ffffffff815d74ac>] __input_unregister_device+0xac/0x150
[<
ffffffff815d75f7>] input_unregister_device+0x47/0x70
[<
ffffffffa00bac45>] uinput_destroy_device+0xb5/0xc0 [uinput]
[<
ffffffffa00bb2de>] uinput_ioctl_handler.isra.9+0x65e/0x740 [uinput]
[<
ffffffff811231ab>] ? do_futex+0x12b/0xad0
[<
ffffffffa00bb3f8>] uinput_ioctl+0x18/0x20 [uinput]
[<
ffffffff81241248>] do_vfs_ioctl+0x298/0x480
[<
ffffffff81337553>] ? security_file_ioctl+0x43/0x60
[<
ffffffff812414a9>] SyS_ioctl+0x79/0x90
[<
ffffffff817a04ee>] entry_SYSCALL_64_fastpath+0x12/0x71
Reported-by: Rodrigo Rivas Costa <rodrigorivascosta@gmail.com>
Reported-by: Clément VUCHENER <clement.vuchener@gmail.com>
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=193741
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
David S. Miller [Thu, 21 Sep 2017 22:31:03 +0000 (15:31 -0700)]
Merge branch 'smc-bug-fixes'
Ursula Braun says:
====================
net/smc: bug fixes 2017-09-20
here is a collection of small smc-patches built for net fixing
smc problems in different areas.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Thu, 21 Sep 2017 07:16:34 +0000 (09:16 +0200)]
net/smc: no close wait in case of process shut down
Usually socket closing is delayed if there is still data available in
the send buffer to be transmitted. If a process is killed, the delay
should be avoided.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Thu, 21 Sep 2017 07:16:33 +0000 (09:16 +0200)]
net/smc: introduce a delay
The number of outstanding work requests is limited. If all work
requests are in use, tx processing is postponed to another scheduling
of the tx worker. Switch to a delayed worker to have a gap for tx
completion queue events before the next retry.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Thu, 21 Sep 2017 07:16:32 +0000 (09:16 +0200)]
net/smc: terminate link group if out-of-sync is received
An out-of-sync condition can just be detected by the client.
If the server receives a CLC DECLINE message indicating an out-of-sync
condition for the link groups, the server must clean up the out-of-sync
link group.
There is no need for an extra third parameter in smc_clc_send_decline().
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Thu, 21 Sep 2017 07:16:31 +0000 (09:16 +0200)]
net/smc: longer delay for client link group removal
Client link group creation always follows the server linkgroup creation.
If peer creates a new server link group, client has to create a new
client link group. If peer reuses a server link group for a new
connection, client has to reuse its client link group as well. This
patch introduces a longer delay for client link group removal to make
sure this link group still exists, once the peer decides to reuse a
server link group. This avoids out-of-sync conditions for link groups.
If already scheduled, modify the delay.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Thu, 21 Sep 2017 07:16:30 +0000 (09:16 +0200)]
net/smc: adapt send request completion notification
The solicited flag is meaningful for the receive completion queue.
Ask for next work completion of any type on the send queue.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Thu, 21 Sep 2017 07:16:29 +0000 (09:16 +0200)]
net/smc: adjust net_device refcount
smc_pnet_fill_entry() uses dev_get_by_name() adding a refcount to ndev.
The following smc_pnet_enter() has to reduce the refcount if the entry
to be added exists already in the pnet table.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Thu, 21 Sep 2017 07:16:28 +0000 (09:16 +0200)]
net/smc: take RCU read lock for routing cache lookup
smc_netinfo_by_tcpsk() looks up the routing cache. Such a lookup requires
protection by an RCU read lock.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hans Wippel [Thu, 21 Sep 2017 07:16:27 +0000 (09:16 +0200)]
net/smc: add receive timeout check
The SMC receive function currently lacks a timeout check under the
condition that no data were received and no data are available. This
patch adds such a check.
Signed-off-by: Hans Wippel <hwippel@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hans Wippel [Thu, 21 Sep 2017 07:16:26 +0000 (09:16 +0200)]
net/smc: add missing dev_put
In the infiniband part, SMC currently uses get_netdev which calls
dev_hold on the returned net device. However, the SMC code never calls
dev_put on that net device resulting in a wrong reference count.
This patch adds a dev_put after the usage of the net device to fix the
issue.
Signed-off-by: Hans Wippel <hwippel@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Meyer [Thu, 21 Sep 2017 06:24:27 +0000 (08:24 +0200)]
net: stmmac: Cocci spatch "of_table"
Make sure (of/i2c/platform)_device_id tables are NULL terminated.
Found by coccinelle spatch "misc/of_table.cocci"
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 21 Sep 2017 22:22:54 +0000 (15:22 -0700)]
Merge branch 'lan78xx-fixes'
Nisar Sayed says:
====================
lan78xx: This series of patches are for lan78xx driver.
This series of patches are for lan78xx driver.
These patches fixes potential issues associated with lan78xx driver.
v5
- Updated changes as per comments
v4
- Updated changes to handle return values as per comments
- Updated EEPROM write handling as per comments
v3
- Updated chagnes as per comments
v2
- Added patch version information
- Added fixes tag
- Updated patch description
- Updated chagnes as per comments
v1
- Splitted patches as per comments
- Dropped "fixed_phy device support" and "Fix for system suspend" changes
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Nisar Sayed [Wed, 20 Sep 2017 21:06:38 +0000 (02:36 +0530)]
lan78xx: Use default values loaded from EEPROM/OTP after reset
Use default value of auto duplex and auto speed values loaded
from EEPROM/OTP after reset. The LAN78xx allows platform
configurations to be loaded from EEPROM/OTP.
Ex: When external phy is connected, the MAC can be configured to
have correct auto speed, auto duplex, auto polarity configured
from the EEPROM/OTP.
Fixes:
55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nisar Sayed [Wed, 20 Sep 2017 21:06:37 +0000 (02:36 +0530)]
lan78xx: Allow EEPROM write for less than MAX_EEPROM_SIZE
Allow EEPROM write for less than MAX_EEPROM_SIZE
Fixes:
55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nisar Sayed [Wed, 20 Sep 2017 21:06:36 +0000 (02:36 +0530)]
lan78xx: Fix for eeprom read/write when device auto suspend
Fix for eeprom read/write when device auto suspend
Fixes:
55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 21 Sep 2017 22:20:41 +0000 (15:20 -0700)]
Merge branch 'phylib-xcvr-type'
Florian Fainelli says:
====================
net: Bring back transceiver type for PHYLIB
With the introduction of the xLINKSETTINGS ethtool APIs, the transceiver type
was deprecated, but in that process we lost some useful information that PHYLIB
was consistently reporting about internal vs. external PHYs.
This brings back transceiver as a read-only field that is only consumed in the
legacy path where ETHTOOL_GET is called but the underlying drivers implement the
new style klink_settings API.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Wed, 20 Sep 2017 22:52:14 +0000 (15:52 -0700)]
net: phy: Keep reporting transceiver type
With commit
2d55173e71b0 ("phy: add generic function to support
ksetting support"), we lost the ability to report the transceiver type
like we used to. Now that we have added back the transceiver type to
ethtool_link_settings, we can report it back like we used to and have no
loss of information.
Fixes:
3f1ac7a700d0 ("net: ethtool: add new ETHTOOL_xLINKSETTINGS API")
Fixes:
2d55173e71b0 ("phy: add generic function to support ksetting support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Wed, 20 Sep 2017 22:52:13 +0000 (15:52 -0700)]
net: ethtool: Add back transceiver type
Commit
3f1ac7a700d0 ("net: ethtool: add new ETHTOOL_xLINKSETTINGS API")
deprecated the ethtool_cmd::transceiver field, which was fine in
premise, except that the PHY library was actually using it to report the
type of transceiver: internal or external.
Use the first word of the reserved field to put this __u8 transceiver
field back in. It is made read-only, and we don't expect the
ETHTOOL_xLINKSETTINGS API to be doing anything with this anyway, so this
is mostly for the legacy path where we do:
ethtool_get_settings()
-> dev->ethtool_ops->get_link_ksettings()
-> convert_link_ksettings_to_legacy_settings()
to have no information loss compared to the legacy get_settings API.
Fixes:
3f1ac7a700d0 ("net: ethtool: add new ETHTOOL_xLINKSETTINGS API")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Timur Tabi [Wed, 20 Sep 2017 20:32:53 +0000 (15:32 -0500)]
net: qcom/emac: add software control for pause frame mode
The EMAC has the option of sending only a single pause frame when
flow control is enabled and the RX queue is full. Although sending
only one pause frame has little value, this would allow admins to
enable automatic flow control without having to worry about the EMAC
flooding nearby switches with pause frames if the kernel hangs.
The option is enabled by using the single-pause-mode private flag.
Signed-off-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Ng [Wed, 20 Sep 2017 18:17:35 +0000 (11:17 -0700)]
hv_netvsc: fix send buffer failure on MTU change
If MTU is changed the host would reject the send buffer change.
This problem is result of recent change to allow changing send
buffer size.
Every time we change the MTU, we store the previous net_device section
count before destroying the buffer, but we don’t store the previous
section size. When we reinitialize the buffer, its size is calculated
by multiplying the previous count and previous size. Since we
continuously increase the MTU, the host returns us a decreasing count
value while the section size is reinitialized to 1728 bytes every
time.
This eventually leads to a condition where the calculated buf_size is
so small that the host rejects it.
Fixes:
8b5327975ae1 ("netvsc: allow controlling send/recv buffer size")
Signed-off-by: Alex Ng <alexng@microsoft.com>
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Wed, 20 Sep 2017 16:18:45 +0000 (09:18 -0700)]
net_sched: remove cls_flower idr on failure
Fixes:
c15ab236d69d ("net/sched: Change cls_flower to use IDR")
Cc: Chris Mi <chrism@mellanox.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Konstantin Khlebnikov [Wed, 20 Sep 2017 12:46:11 +0000 (15:46 +0300)]
net_sched/hfsc: fix curve activation in hfsc_change_class()
If real-time or fair-share curves are enabled in hfsc_change_class()
class isn't inserted into rb-trees yet. Thus init_ed() and init_vf()
must be called in place of update_ed() and update_vf().
Remove isn't required because for now curves cannot be disabled.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Konstantin Khlebnikov [Wed, 20 Sep 2017 12:45:36 +0000 (15:45 +0300)]
net_sched: always reset qdisc backlog in qdisc_reset()
SKB stored in qdisc->gso_skb also counted into backlog.
Some qdiscs don't reset backlog to zero in ->reset(),
for example sfq just dequeue and free all queued skb.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Fixes:
2ccccf5fb43f ("net_sched: update hierarchical backlog too")
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 21 Sep 2017 16:01:03 +0000 (06:01 -1000)]
Merge tag 'kbuild-fixes-v4.14' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
"Here are some early Kbuild fixes.
The in-kernel firmware was removed during the previous merge window.
Since then, some bug reports of broken rpm building are flying in ML.
We need to fix it now.
Summary:
- remove firmware install from rpm-pkg / deb-pkg
- fix mismatch between release number and UTS_VERSION for rpm-pkg"
* tag 'kbuild-fixes-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: rpm-pkg: fix version number handling
kbuild: deb-pkg: remove firmware package support
kbuild: rpm-pkg: delete firmware_install to fix build error
Linus Torvalds [Thu, 21 Sep 2017 15:57:50 +0000 (05:57 -1000)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs
Pull misc fixes from Al Viro:
"A couple of regression fixes, one for this merge window, one for the
previous cycle"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ipc/shm: Fix order of parameters when calling copy_compat_shmid_to_user
iov_iter: fix page_copy_sane for compound pages
Linus Torvalds [Thu, 21 Sep 2017 15:55:20 +0000 (05:55 -1000)]
Merge tag 'mtd/fixes-for-4.14-rc2' of git://git.infradead.org/linux-mtd
Pull mtd fixes from Boris Brezillon:
"SPI NOR:
- Fix the SFDP parsing code (bugs reported by Geert Uytterhoeven)
NAND:
- Fix a resource leak in the lpc32xx_mlc driver
- Fix a build warning in the core"
* tag 'mtd/fixes-for-4.14-rc2' of git://git.infradead.org/linux-mtd:
mtd: nand: remove unused blockmask variable
mtd: nand: lpc32xx_mlc: Fix an error handling path in lpc32xx_nand_probe()
mtd: spi-nor: fix DMA unsafe buffer issue in spi_nor_read_sfdp()
mtd: spi-nor: Check consistency of the memory size extracted from the SFDP
Linus Torvalds [Thu, 21 Sep 2017 15:52:36 +0000 (05:52 -1000)]
Merge tag 'drm-fixes-for-v4.14-rc2' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"amdkfd, i915 and exynos fixes.
I've ended up on unplanned + planned leave this week, but there were
some fixes I decided to dequeue, some amdkfd bits missed the next pull
but they are pretty trivial, so I included them.
I'm not sure I'll see much else for rc2, lots of people are at XDC"
* tag 'drm-fixes-for-v4.14-rc2' of git://people.freedesktop.org/~airlied/linux:
drm/exynos/hdmi: Fix unsafe list iteration
drm: exynos: include linux/irq.h
drm/exynos: Fix suspend/resume support
drm/exynos: Fix locking in the suspend/resume paths
drm/i915: Remove unused 'in_vbl' from i915_get_crtc_scanoutpos()
drm/i915/cnp: set min brightness from VBT
Revert "drm/i915/bxt: Disable device ready before shutdown command"
drm/i915/bxt: set min brightness from VBT
drm/i915: Fix an error handling in 'intel_framebuffer_init()'
drm/i915/gvt: Fix incorrect PCI BARs reporting
drm/amdkfd: pass queue's mqd when destroying mqd
drm/amdkfd: remove memset before memcpy
uapi linux/kfd_ioctl.h: only use __u32 and __u64
Linus Torvalds [Thu, 21 Sep 2017 15:51:03 +0000 (05:51 -1000)]
Merge tag 'dma-mapping-4.14-2' of git://git.infradead.org/users/hch/dma-mapping
Pull dma mapping fix from Christoph Hellwig:
"A fix for a fix that went in this merge window from Arnd"
* tag 'dma-mapping-4.14-2' of git://git.infradead.org/users/hch/dma-mapping:
dma-coherent: fix rmem_dma_device_init regression
Manuel Lauss [Tue, 12 Sep 2017 18:36:28 +0000 (20:36 +0200)]
MIPS: PCI: fix pcibios_map_irq section mismatch
Drop the __init from pcibios_map_irq() to make this section mis-
match go away:
WARNING: vmlinux.o(.text+0x56acd4): Section mismatch in reference from the function pcibios_scanbus() to the function .init.text:pcibios_map_irq()
The function pcibios_scanbus() references
the function __init pcibios_map_irq().
This is often because pcibios_scanbus lacks a __init
annotation or the annotation of pcibios_map_irq is wrong.
Run-Tested only on Alchemy.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17267/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
James Hogan [Tue, 19 Sep 2017 13:11:22 +0000 (14:11 +0100)]
MIPS: Fix input modify in __write_64bit_c0_split()
The inline asm in __write_64bit_c0_split() modifies the 64-bit input
operand by shifting the high register left by 32, and constructing the
full 64-bit value in the low register (even on a 32-bit kernel), so if
that value is used again it could cause breakage as GCC would assume the
registers haven't changed when they have.
To quote the GCC extended asm documentation:
> Warning: Do not modify the contents of input-only operands (except for
> inputs tied to outputs). The compiler assumes that on exit from the
> asm statement these operands contain the same values as they had
> before executing the statement.
Avoid modifying the input by using a temporary variable as an output
which is modified instead of the input and not otherwise used. The asm
is always __volatile__ so GCC shouldn't optimise it out. The low
register of the temporary output is written before the high register of
the input is read, so we have two constraint alternatives, one where
both use the same registers (for when the input value isn't subsequently
used), and one with an early clobber on the output in case the low
output uses the same register as the high input. This allows the
resulting assembly to remain mostly unchanged.
A diff of a MIPS32r6 kernel reveals only three differences, two in
relation to write_c0_r10k_diag() in cpu_probe() (register allocation
rearranged slightly but otherwise identical), and one in relation to
write_c0_cvmmemctl2() in kvm_vz_local_flush_guesttlb_all(), but the
octeon CPU is only supported on 64-bit kernels where
__write_64bit_c0_split() isn't used so that shouldn't matter in
practice. So there currently doesn't appear to be anything broken by
this bug.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17315/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Arnd Bergmann [Mon, 18 Sep 2017 15:55:24 +0000 (17:55 +0200)]
MIPS: MSP71xx: Include asm/setup.h
msp71xx_defconfig can not be built at the in v4.14-rc1
arch/mips/pmcs-msp71xx/msp_smp.c:72:2: error: implicit declaration of function 'set_vi_handler' [-Werror=implicit-function-declaration]
I don't know what caused the regression, but including the right
header is the obvious fix.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17309/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Thomas Gleixner [Thu, 21 Sep 2017 09:57:08 +0000 (11:57 +0200)]
Merge tag 'irqchip-4.14-2' of git://git./linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip updates from Marc Zyngier
- A GICv3 initialisation fix when some CPUs fail to be brought up
- A GICv4 compile fix for GCC 4.5 (!)
- A MIPS-GIC fix for the PCIe support
Thomas Gleixner [Thu, 21 Sep 2017 09:54:44 +0000 (11:54 +0200)]
Revert "genirq: Restrict effective affinity to interrupts actually using it"
This reverts commit
74def747bcd09692bdbf8c6a15350795b0f11ca8.
The change to the helper function is only correct for the /proc/irq/
readout usage, but breaks the existing x86 usage of that function.
Reported-by: Yanko Kaneti <yaneti@declera.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Tyrel Datwyler [Wed, 20 Sep 2017 21:02:52 +0000 (17:02 -0400)]
powerpc/pseries: Fix parent_dn reference leak in add_dt_node()
A reference to the parent device node is held by add_dt_node() for the
node to be added. If the call to dlpar_configure_connector() fails
add_dt_node() returns ENOENT and that reference is not freed.
Add a call to of_node_put(parent_dn) prior to bailing out after a
failed dlpar_configure_connector() call.
Fixes:
8d5ff320766f ("powerpc/pseries: Make dlpar_configure_connector parent node aware")
Cc: stable@vger.kernel.org # v3.12+
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tyrel Datwyler [Wed, 20 Sep 2017 21:02:51 +0000 (17:02 -0400)]
powerpc/pseries: Fix "OF: ERROR: Bad of_node_put() on /cpus" during DLPAR
Commit
215ee763f8cb ("powerpc: pseries: remove dlpar_attach_node
dependency on full path") reworked dlpar_attach_node() to no longer
look up the parent node "/cpus", but instead to have the parent node
passed by the caller in the function parameter list.
As a result dlpar_attach_node() is no longer responsible for freeing
the reference to the parent node. However, commit
215ee763f8cb failed
to remove the of_node_put(parent) call in dlpar_attach_node(), or to
take into account that the reference to the parent in the caller
dlpar_cpu_add() needs to be held until after dlpar_attach_node()
returns.
As a result doing repeated cpu add/remove dlpar operations will
eventually result in the following error:
OF: ERROR: Bad of_node_put() on /cpus
CPU: 0 PID: 10896 Comm: drmgr Not tainted 4.13.0-autotest #1
Call Trace:
dump_stack+0x15c/0x1f8 (unreliable)
of_node_release+0x1a4/0x1c0
kobject_put+0x1a8/0x310
kobject_del+0xbc/0xf0
__of_detach_node_sysfs+0x144/0x210
of_detach_node+0xf0/0x180
dlpar_detach_node+0xc4/0x120
dlpar_cpu_remove+0x280/0x560
dlpar_cpu_release+0xbc/0x1b0
arch_cpu_release+0x6c/0xb0
cpu_release_store+0xa0/0x100
dev_attr_store+0x68/0xa0
sysfs_kf_write+0xa8/0xf0
kernfs_fop_write+0x2cc/0x400
__vfs_write+0x5c/0x340
vfs_write+0x1a8/0x3d0
SyS_write+0xa8/0x1a0
system_call+0x58/0x6c
Fix the issue by removing the of_node_put(parent) call from
dlpar_attach_node(), and ensuring that the reference to the parent
node is properly held and released by the caller dlpar_cpu_add().
Fixes:
215ee763f8cb ("powerpc: pseries: remove dlpar_attach_node dependency on full path")
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
[mpe: Add a comment in the code and frob the change log slightly]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Benjamin Herrenschmidt [Thu, 7 Sep 2017 06:35:40 +0000 (16:35 +1000)]
powerpc/eeh: Create PHB PEs after EEH is initialized
Otherwise we end up not yet having computed the right diag data size
on powernv where EEH initialization is delayed, thus causing memory
corruption later on when calling OPAL.
Fixes:
5cb1f8fdddb7 ("powerpc/powernv/pci: Dynamically allocate PHB diag data")
Cc: stable@vger.kernel.org # v4.13+
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Will Deacon [Mon, 18 Sep 2017 16:47:38 +0000 (17:47 +0100)]
ipc/shm: Fix order of parameters when calling copy_compat_shmid_to_user
Commit
553f770ef71b ("ipc: move compat shmctl to native") moved the
compat IPC syscall handling into ipc/shm.c and refactored the struct
accessors in the process. Unfortunately, the call to
copy_compat_shmid_to_user when handling a compat {IPC,SHM}_STAT command
gets the arguments the wrong way round, passing a kernel stack address
as the user buffer (destination) and the user buffer as the kernel stack
address (source).
This patch fixes the parameter ordering so the buffers are accessed
correctly.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Petar Penkov [Tue, 29 Aug 2017 18:20:32 +0000 (11:20 -0700)]
iov_iter: fix page_copy_sane for compound pages
Issue is that if the data crosses a page boundary inside a compound
page, this check will incorrectly trigger a WARN_ON.
To fix this, compute the order using the head of the compound page and
adjust the offset to be relative to that head.
Fixes:
72e809ed81ed ("iov_iter: sanity checks for copy to/from page
primitives")
Signed-off-by: Petar Penkov <ppenkov@google.com>
CC: Al Viro <viro@zeniv.linux.org.uk>
CC: Eric Dumazet <edumazet@google.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Steve French [Thu, 21 Sep 2017 00:57:18 +0000 (19:57 -0500)]
SMB: Validate negotiate (to protect against downgrade) even if signing off
As long as signing is supported (ie not a guest user connection) and
connection is SMB3 or SMB3.02, then validate negotiate (protect
against man in the middle downgrade attacks). We had been doing this
only when signing was required, not when signing was just enabled,
but this more closely matches recommended SMB3 behavior and is
better security. Suggested by Metze.
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Jeremy Allison <jra@samba.org>
Acked-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
Shu Wang [Fri, 8 Sep 2017 10:48:33 +0000 (18:48 +0800)]
cifs: release auth_key.response for reconnect.
There is a race that cause cifs reconnect in cifs_mount,
- cifs_mount
- cifs_get_tcp_session
- [ start thread cifs_demultiplex_thread
- cifs_read_from_socket: -ECONNABORTED
- DELAY_WORK smb2_reconnect_server ]
- cifs_setup_session
- [ smb2_reconnect_server ]
auth_key.response was allocated in cifs_setup_session, and
will release when the session destoried. So when session re-
connect, auth_key.response should be check and released.
Tested with my system:
CIFS VFS: Free previous auth_key.response =
ffff8800320bbf80
A simple auth_key.response allocation call trace:
- cifs_setup_session
- SMB2_sess_setup
- SMB2_sess_auth_rawntlmssp_authenticate
- build_ntlmssp_auth_blob
- setup_ntlmv2_rsp
Signed-off-by: Shu Wang <shuwang@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Shu Wang [Thu, 7 Sep 2017 08:03:27 +0000 (16:03 +0800)]
cifs: release cifs root_cred after exit_cifs
memory leak was found by kmemleak. exit_cifs_spnego
should be called before cifs module removed, or
cifs root_cred will not be released.
kmemleak report:
unreferenced object 0xffff880070a3ce40 (size 192):
backtrace:
kmemleak_alloc+0x4a/0xa0
kmem_cache_alloc+0xc7/0x1d0
prepare_kernel_cred+0x20/0x120
init_cifs_spnego+0x2d/0x170 [cifs]
0xffffffffc07801f3
do_one_initcall+0x51/0x1b0
do_init_module+0x60/0x1fd
load_module+0x161e/0x1b60
SYSC_finit_module+0xa9/0x100
SyS_finit_module+0xe/0x10
Signed-off-by: Shu Wang <shuwang@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
Colin Ian King [Tue, 19 Sep 2017 15:27:39 +0000 (16:27 +0100)]
CIFS: make arrays static const, reduces object code size
Don't populate the read-only arrays types[] on the stack, instead make
them both static const. Makes the object code smaller by over 200 bytes:
Before:
text data bss dec hex filename
111503 37696 448 149647 2488f fs/cifs/file.o
After:
text data bss dec hex filename
111140 37856 448 149444 247c4 fs/cifs/file.o
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
David S. Miller [Wed, 20 Sep 2017 23:15:40 +0000 (16:15 -0700)]
Merge branch 'hns3-tm-fixes'
Yunsheng Lin says:
====================
TM related bugfixes for the HNS3 Ethernet Driver
This patch set contains a few bugfixes related to hclge_tm module.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Yunsheng Lin [Wed, 20 Sep 2017 10:52:58 +0000 (18:52 +0800)]
net: hns3: Fix for pri to tc mapping in TM
Current mapping between pri and tc is one to one,
so user can't map multi priorities to the same tc.
This patch changes the mapping to many to one.
Fixes:
848440544b41f ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yunsheng Lin [Wed, 20 Sep 2017 10:52:57 +0000 (18:52 +0800)]
net: hns3: Fix for setting rss_size incorrectly
rss_size is 1, 2, 4, 8, 16, 32, 64, 128, but acutal tc queue
size can be any u16 less than 128. If tc queue size is 5, we
set the rss_size to 8, indirection table will be used to limit
the size of actual queue size.
It may cause dropping of receiving packet in hardware if
rss_size is not set correctly.
For now, each TC has the same rss size.
Fixes:
46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yunsheng Lin [Wed, 20 Sep 2017 10:52:56 +0000 (18:52 +0800)]
net: hns3: Fix typo error for feild in hclge_tm
This patch fixes a typo error for feild, which should be field.
Fixes:
848440544b41f ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yunsheng Lin [Wed, 20 Sep 2017 10:52:55 +0000 (18:52 +0800)]
net: hns3: Fix for rx priv buf allocation when DCB is not supported
When hdev doesn't support DCB, rx private buffer is not allocated,
otherwise there is not enough buffer for rx shared buffer, causing
buffer allocation process to fail.
This patch fixes by checking the dcb capability in
hclge_rx_buffer_calc.
Fixes:
46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yunsheng Lin [Wed, 20 Sep 2017 10:52:54 +0000 (18:52 +0800)]
net: hns3: Fix for rx_priv_buf_alloc not setting rx shared buffer
rx_priv_buf_alloc is used to tell hardware how much buffer is
used for rx direction, right now only the private buffer is
assigned.
For ae_dev that doesn't support DCB, private rx buffer is assigned
to zero, only shared rx buffer is used. So not setting the shared
rx buffer cause dropping of packet in SSU.
Fixes:
46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yunsheng Lin [Wed, 20 Sep 2017 10:52:53 +0000 (18:52 +0800)]
net: hns3: Fix for not setting rx private buffer size to zero
When rx private buffer is disabled, there may be some case that
the rx private buffer is not set to zero, which may cause buffer
allocation process to fail.
This patch fixes this problem by setting priv->enable to 0 and
priv->buf_size to zero when rx private buffer is disabled.
Fixes:
46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yunsheng Lin [Wed, 20 Sep 2017 10:52:52 +0000 (18:52 +0800)]
net: hns3: Fix for DEFAULT_DV when dev doesn't support DCB
When ae_dev doesn't support DCB, DEFAULT_DV must be set to
a lower value, otherwise the buffer allocation process will
fail.
This patch fix it by setting it to 30K bytes.
Fixes:
46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yunsheng Lin [Wed, 20 Sep 2017 10:52:51 +0000 (18:52 +0800)]
net: hns3: Fix initialization when cmd is not supported
When ae_dev doesn't support DCB, rx_priv_wl_config,
common_thrd_config and tm_qs_bp_cfg can't be called, otherwise
cmd return fail, which causes the hclge module initialization
process to fail.
This patch fix it by adding a DCB capability flag to check if
the ae_dev support DCB.
Fixes:
46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yunsheng Lin [Wed, 20 Sep 2017 10:52:50 +0000 (18:52 +0800)]
net: hns3: Cleanup for ROCE capability flag in ae_dev
This patch add the ROCE supported flag in the driver_data
field of pci_device_id, delete roce_pci_tbl and change
HNAE_DEV_SUPPORT_ROCE_B to HNAE3_DEV_SUPPORT_ROCE_B.
This cleanup is done in order to support adding capability
in pci_device_id and to fix initialization failure when
cmd is not supported.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 20 Sep 2017 23:08:23 +0000 (16:08 -0700)]
Merge git://git./pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains two Netfilter fixes for your net tree,
they are:
1) Fix NAt compilation with UP, from Geert Uytterhoeven.
2) Fix incorrect number of entries when dumping a set, from
Vishwanath Pai.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Meng Xu [Wed, 20 Sep 2017 01:49:55 +0000 (21:49 -0400)]
isdn/i4l: fetch the ppp_write buffer in one shot
In isdn_ppp_write(), the header (i.e., protobuf) of the buffer is
fetched twice from userspace. The first fetch is used to peek at the
protocol of the message and reset the huptimer if necessary; while the
second fetch copies in the whole buffer. However, given that buf resides
in userspace memory, a user process can race to change its memory content
across fetches. By doing so, we can either avoid resetting the huptimer
for any type of packets (by first setting proto to PPP_LCP and later
change to the actual type) or force resetting the huptimer for LCP
packets.
This patch changes this double-fetch behavior into two single fetches
decided by condition (lp->isdn_device < 0 || lp->isdn_channel <0).
A more detailed discussion can be found at
https://marc.info/?l=linux-kernel&m=
150586376926123&w=2
Signed-off-by: Meng Xu <mengxu.gatech@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Troy Kisky [Wed, 20 Sep 2017 00:33:09 +0000 (17:33 -0700)]
net: fec: return IRQ_HANDLED if fec_ptp_check_pps_event handled it
fec_ptp_check_pps_event will return 1 if FEC_T_TF_MASK caused
an interrupt. Don't return IRQ_NONE in this case.
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Troy Kisky [Wed, 20 Sep 2017 00:33:08 +0000 (17:33 -0700)]
net: fec: remove unused interrupt FEC_ENET_TS_TIMER
FEC_ENET_TS_TIMER is not checked in the interrupt routine
so there is no need to enable it.
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Troy Kisky [Wed, 20 Sep 2017 00:33:07 +0000 (17:33 -0700)]
net: fec: only check queue 0 if RXF_0/TXF_0 interrupt is set
Before queue 0 was always checked if any queue caused an interrupt.
It is better to just mark queue 0 if queue 0 has caused an interrupt.
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Fugang Duan <Fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Edward Cree [Tue, 19 Sep 2017 17:45:56 +0000 (18:45 +0100)]
net: change skb->mac_header when Generic XDP calls adjust_head
Since XDP's view of the packet includes the MAC header, moving the start-
of-packet with bpf_xdp_adjust_head needs to also update the offset of the
MAC header (which is relative to skb->head, not to the skb->data that was
changed).
Without this, tcpdump sees packets starting from the old MAC header rather
than the new one, at least in my tests on the loopback device.
Fixes:
b5cdae3291f7 ("net: Generic XDP")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Meng Xu [Tue, 19 Sep 2017 17:19:13 +0000 (13:19 -0400)]
net: compat: assert the size of cmsg copied in is as expected
The actual length of cmsg fetched in during the second loop
(i.e., kcmsg - kcmsg_base) could be different from what we
get from the first loop (i.e., kcmlen).
The main reason is that the two get_user() calls in the two
loops (i.e., get_user(ucmlen, &ucmsg->cmsg_len) and
__get_user(ucmlen, &ucmsg->cmsg_len)) could cause ucmlen
to have different values even they fetch from the same userspace
address, as user can race to change the memory content in
&ucmsg->cmsg_len across fetches.
Although in the second loop, the sanity check
if ((char *)kcmsg_base + kcmlen - (char *)kcmsg < CMSG_ALIGN(tmp))
is inplace, it only ensures that the cmsg fetched in during the
second loop does not exceed the length of kcmlen, but not
necessarily equal to kcmlen. But indicated by the assignment
kmsg->msg_controllen = kcmlen, we should enforce that.
This patch adds this additional sanity check and ensures that
what is recorded in kmsg->msg_controllen is the actual cmsg length.
Signed-off-by: Meng Xu <mengxu.gatech@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>