OSDN Git Service
Peter Ujfalusi [Wed, 12 Oct 2011 08:57:53 +0000 (11:57 +0300)]
Input: twl6040: Simplify vibra regsiter definitions
The bits within the two control registers (for left and right channel)
are identical.
Use common names for the bits acros the two register.
Also add the missing definition for the path selection bit.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Axel Lin [Tue, 11 Oct 2011 23:16:25 +0000 (07:16 +0800)]
ASoC: da7210: convert to soc-cache
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Axel Lin [Tue, 11 Oct 2011 23:03:09 +0000 (07:03 +0800)]
ASoC: Remove impossible case from wm8994_hw_params
We set hw_params callback for wm8994_aif3_dai_ops to wm8994_aif3_hw_params.
Thus no need to check wm8994-aif3 in wm8994_hw_params.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Axel Lin [Tue, 11 Oct 2011 22:57:25 +0000 (06:57 +0800)]
ASoC: Delete ads117x.h
This is not required after multi-component patch.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Axel Lin [Tue, 11 Oct 2011 12:20:53 +0000 (20:20 +0800)]
ASoC: ak4642: convert to soc-cache
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Mon, 10 Oct 2011 12:38:06 +0000 (13:38 +0100)]
ASoC: Instantiate card widgets immediately
This ensures they are available prior to the card late_probe().
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Tue, 27 Sep 2011 16:39:50 +0000 (17:39 +0100)]
ASoC: Implement WM5100 accessory detection support
The WM5100 includes an advanced, low power, accessory detect subsystem
capable of detecting both accessory presence and button presses while
the device is in an ultra low power mode. Implement initial support for
this.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Tue, 11 Oct 2011 14:37:38 +0000 (15:37 +0100)]
ASoC: Add missing default for WM5100 Clocking 1
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Wolfram Sang [Tue, 11 Oct 2011 10:43:02 +0000 (12:43 +0200)]
ASoC: Fix typo in Kconfig symbol for tlv320aic32x4
It is currently named "TVL" instead of "TLV".
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Javier Martin <javier.martin@vista-silicon.com>
Cc: Liam Girdwood <lrg@ti.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Peter Ujfalusi [Tue, 11 Oct 2011 10:11:55 +0000 (13:11 +0300)]
ASoC: tlv320dac33: Convert to table based init
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Peter Ujfalusi [Tue, 11 Oct 2011 10:11:32 +0000 (13:11 +0300)]
ASoC: twl4030: Convert to table based init
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Peter Ujfalusi [Tue, 11 Oct 2011 10:11:12 +0000 (13:11 +0300)]
ASoC: twl6040: Convert to table based init
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Axel Lin [Tue, 11 Oct 2011 09:55:00 +0000 (17:55 +0800)]
ASoC: Writing register default value for the reset register
The WM8983 can be reset by performing a write of any value to
the software reset register.
To avoid writing to the software reset register while resume,
we should write the same value in wm8983_reg_defs to software
reset register in wm8983_probe().
The write to the reset register is suppressed by the cache
restore code when it skips writes of default registers.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Sat, 8 Oct 2011 11:02:13 +0000 (12:02 +0100)]
ASoC: Convert Goni to data based DAPM init
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Peter Ujfalusi [Mon, 10 Oct 2011 12:34:12 +0000 (15:34 +0300)]
ASoC: sdp3430: Let core to deal with the DAPM widgets
Pass the DAPM widgets/routes via the snd_soc_card struct
to core.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Misael Lopez Cruz <misael.lopez@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Peter Ujfalusi [Mon, 10 Oct 2011 12:34:11 +0000 (15:34 +0300)]
ASoC: osk5912: Let core to deal with the DAPM widgets
Pass the DAPM widgets/routes via the snd_soc_card struct
to core. With this change we do not need the init function
since the remaining snd_soc_dapm_enable_pin calls are
not needed.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Peter Ujfalusi [Mon, 10 Oct 2011 12:34:10 +0000 (15:34 +0300)]
ASoC: n810: Let the core to register DAPM widgets/routes and controls
Pass the DAPM widgets/routes and static controls via the
snd_soc_card struct to core. In this way the machine driver
does not need to handle the DAPM widgets/routes.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Peter Ujfalusi [Mon, 10 Oct 2011 12:34:09 +0000 (15:34 +0300)]
ASoC: am3517evm: Let core to deal with the DAPM widgets
Pass the DAPM widgets/routes via the snd_soc_card struct
to core. With this change we do not need the init function
since the remaining snd_soc_dapm_enable_pin calls are
not needed.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Anuj Aggarwal <anuj.aggarwal@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Peter Ujfalusi [Mon, 10 Oct 2011 12:34:16 +0000 (15:34 +0300)]
ASoC: sdp4430: No need to call dapm_pin_enable at init time
Widgets are connected by default.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Misael Lopez Cruz <misael.lopez@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Peter Ujfalusi [Mon, 10 Oct 2011 12:34:15 +0000 (15:34 +0300)]
ASoC: sdp4430: Let core to deal with the DAPM widgets
Pass the DAPM widgets/routes via the snd_soc_card struct
to core.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Misael Lopez Cruz <misael.lopez@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Peter Ujfalusi [Mon, 10 Oct 2011 12:34:14 +0000 (15:34 +0300)]
ASoC: zoom2: No need to call dapm_pin_enable at init time
Widgets are connected by default.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Misael Lopez Cruz <misael.lopez@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Peter Ujfalusi [Mon, 10 Oct 2011 12:34:13 +0000 (15:34 +0300)]
ASoC: zoom2: Let core to deal with the DAPM widgets
Pass the DAPM widgets/routes via the snd_soc_card struct
to core.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Misael Lopez Cruz <misael.lopez@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Peter Ujfalusi [Mon, 10 Oct 2011 12:34:08 +0000 (15:34 +0300)]
ASoC: OMAP machines: Remove soc_dapm_sync() call from init
No need to call soc_dapm_sync at init time.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Anuj Aggarwal <anuj.aggarwal@ti.com>
Cc: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Cc: Jarkko Nikula <jarkko.nikula@bitmer.com>
Cc: GraÅžvydas Ignotas <notasas@gmail.com>
Cc: Misael Lopez Cruz <misael.lopez@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Sat, 8 Oct 2011 12:30:17 +0000 (13:30 +0100)]
ASoC: Convert Jive to table based init
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Sangbeom Kim <sbkim73@samsung.com>
Mark Brown [Sat, 8 Oct 2011 12:31:18 +0000 (13:31 +0100)]
ASoC: Convert SMDK WM8580 to table based DAPM init
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Sangbeom Kim <sbkim73@samsung.com>
Mark Brown [Sat, 8 Oct 2011 12:30:55 +0000 (13:30 +0100)]
ASoC: Convert SmartQ to table based init
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Sangbeom Kim <sbkim73@samsung.com>
Mark Brown [Sat, 8 Oct 2011 12:30:35 +0000 (13:30 +0100)]
ASoC: Convert RX1950 to table based init
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Sangbeom Kim <sbkim73@samsung.com>
Mark Brown [Sat, 8 Oct 2011 12:30:06 +0000 (13:30 +0100)]
ASoC: Convert H1940 to table based init
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Sangbeom Kim <sbkim73@samsung.com>
Mark Brown [Sat, 8 Oct 2011 11:19:12 +0000 (12:19 +0100)]
ASoC: Convert Simtec machines to table based DAPM init
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Michael Opdenacker [Mon, 10 Oct 2011 05:07:08 +0000 (07:07 +0200)]
ASoC: fix checkpatch.pl error in omap-mcbsp
Signed-off-by: Michael Opdenacker <michael.opdenacker@linaro.org>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Axel Lin [Thu, 6 Oct 2011 02:11:51 +0000 (10:11 +0800)]
ASoC: ak4535: convert to soc-cache
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Axel Lin [Fri, 7 Oct 2011 13:53:39 +0000 (21:53 +0800)]
ASoC: wm8988: Convert to snd_soc_cache_sync
Convert to snd_soc_cache_sync for sync reg_cache with the hardware.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Axel Lin [Fri, 7 Oct 2011 13:52:42 +0000 (21:52 +0800)]
ASoC: wm8974: Convert to snd_soc_cache_sync
Convert to snd_soc_cache_sync for sync reg_cache with the hardware.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Axel Lin [Fri, 7 Oct 2011 13:52:00 +0000 (21:52 +0800)]
ASoC: wm8971: Convert to snd_soc_cache_sync
Convert to snd_soc_cache_sync for sync reg_cache with the hardware.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Axel Lin [Fri, 7 Oct 2011 13:50:23 +0000 (21:50 +0800)]
ASoC: wm8960: Convert to snd_soc_cache_sync
Convert to snd_soc_cache_sync for sync reg_cache with the hardware.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Axel Lin [Fri, 7 Oct 2011 13:42:49 +0000 (21:42 +0800)]
ASoC: wm8940: Convert to snd_soc_cache_sync
Convert to snd_soc_cache_sync for sync reg_cache with the hardware.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Axel Lin [Fri, 7 Oct 2011 13:41:41 +0000 (21:41 +0800)]
ASoC: wm8776: Convert to snd_soc_cache_sync
Convert to snd_soc_cache_sync for sync reg_cache with the hardware.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Axel Lin [Fri, 7 Oct 2011 13:40:44 +0000 (21:40 +0800)]
ASoC: wm8750: Convert to snd_soc_cache_sync
Convert to snd_soc_cache_sync for sync reg_cache with the hardware.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Axel Lin [Fri, 7 Oct 2011 13:39:09 +0000 (21:39 +0800)]
ASoC: wm8731: Convert to snd_soc_cache_sync
Convert to snd_soc_cache_sync for sync reg_cache with the hardware.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Axel Lin [Fri, 7 Oct 2011 13:37:54 +0000 (21:37 +0800)]
ASoC: wm8711: Convert to snd_soc_cache_sync
Convert to snd_soc_cache_sync for sync reg_cache with the hardware.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Axel Lin [Fri, 7 Oct 2011 13:36:27 +0000 (21:36 +0800)]
ASoC: wm8510: Convert to snd_soc_cache_sync
Convert to snd_soc_cache_sync for sync reg_cache with the hardware.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Sat, 8 Oct 2011 12:36:03 +0000 (13:36 +0100)]
ASoC: Fix DAPM sync for TLV320AIC3x custom DAPM widget
We really should be doing this in the core, not in a driver...
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Tested-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Mark Brown [Sun, 9 Oct 2011 13:06:13 +0000 (14:06 +0100)]
ASoC: Squash error codes from regmap down to -1 on read
The ASoC code always uses -1 as the error code due to reporting errors in
band with the value. Ensure we don't confuse anything by making sure we
don't pass actual error codes back into the rest of the code on read.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Sun, 9 Oct 2011 10:52:05 +0000 (11:52 +0100)]
ASoC: Cache connected input and output recursions
The number of connected input and output endpoints for a given widgets
can't change during a DAPM run so there is no need to redo the recursion
through branches of the tree we've already visited. Doing this on one of
my test systems gives an improvement of:
Power Path Neighbour
Before: 63 607 731
After: 63 141 181
which scales up well as more widgets are involved in paths.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Sat, 8 Oct 2011 13:04:50 +0000 (14:04 +0100)]
ASoC: Assign power_check when we allocate DAPM widgets
This ensures none of the rest of the code ever encounters a widget which
does not have a power check function.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Sat, 8 Oct 2011 12:59:44 +0000 (13:59 +0100)]
ASoC: Ensure all DAPM widgets are instantiated with the card
Specifically for the widgets added by machine driver late probe functions.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Sat, 8 Oct 2011 12:29:18 +0000 (13:29 +0100)]
ASoC: Remove redundant snd_soc_dapm_sync() calls from machine drivers
The core will sync DAPM as part of the card initialization, there is no
need for machine drivers to do so during their setup.
OMAP drivers are omitted as I know Peter already has patches for them.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Fri, 7 Oct 2011 13:29:19 +0000 (14:29 +0100)]
ASoC: Suppress early calls to snd_soc_dapm_sync()
Ensure we only have one sync during the initial startup of the card by
making snd_soc_dapm_sync() a noop on non-instantiated cards. This avoids
any bounces due to things like jacks reporting their initial state on
partially initialised cards. The callers that don't also get called at
runtime should just be removed.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Sun, 24 Jul 2011 11:40:48 +0000 (12:40 +0100)]
regulator: Add WM1811 support
The WM1811 has a slightly different range on LDO2 to other WM8994 class
devices.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Thu, 6 Oct 2011 19:03:18 +0000 (20:03 +0100)]
Merge branch 'for-3.1' into for-3.2
Axel Lin [Wed, 5 Oct 2011 23:29:56 +0000 (07:29 +0800)]
ASoC: Return early with -EINVAL if invalid dai format is detected
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Axel Lin [Thu, 6 Oct 2011 03:44:56 +0000 (11:44 +0800)]
ASoC: wm8990: Remove incorrect comments
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Axel Lin [Thu, 6 Oct 2011 03:00:19 +0000 (11:00 +0800)]
ASoC: wm8990: Convert to snd_soc_cache_sync for sync reg_cache with the hardware
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Peter Ujfalusi [Thu, 6 Oct 2011 04:43:21 +0000 (07:43 +0300)]
ASoC: fix codec breakage caused by the volsw/volsw_2r merger
By accident few places still uses the _2r calls from
the core.
This is a quick fix, the drivers using the old callbacks
going to be changed.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Wolfram Sang [Thu, 6 Oct 2011 18:53:36 +0000 (20:53 +0200)]
ASoC: tlv320aic32x4 fix initialization of micpga routing
Checking the pdata-flags used 'or', so the check is always true. Use 'and' to
correctly mask the flags.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Javier Martin <javier.martin@vista-silicon.com>
Cc: Liam Girdwood <lrg@ti.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Thu, 6 Oct 2011 12:30:55 +0000 (13:30 +0100)]
ASoC: Ensure DAPM widgets are set up before we sync jacks
We synchronise jack state on startup - when we do that make sure that we
have set up all the DAPM widgets first in case we end up touching any of
the partially set up widgets when syncing the jack pins.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Peter Ujfalusi [Thu, 6 Oct 2011 06:59:12 +0000 (09:59 +0300)]
ASoC: Replace remaining use of *_volsw_2r with *_volsw
The snd_soc_*_volsw_2r functionality has been merged to
*volsw callbacks.
Few places still used the get, or put variant of volsw_2r,
replace those with the corresponding *_volsw.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Thu, 6 Oct 2011 10:10:01 +0000 (11:10 +0100)]
ASoC: Remove references to linux@wolfsonmicro.com
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Axel Lin [Wed, 5 Oct 2011 06:47:15 +0000 (14:47 +0800)]
ASoC: Remove unused variable 'wm9090' in wm9090_probe
Eliminate below build warning:
CC sound/soc/codecs/wm9090.o
sound/soc/codecs/wm9090.c: In function 'wm9090_probe':
sound/soc/codecs/wm9090.c:550: warning: unused variable 'wm9090'
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Axel Lin [Wed, 5 Oct 2011 06:41:35 +0000 (14:41 +0800)]
ASoC: imx: Remove unused variable 'dai'
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Axel Lin [Wed, 5 Oct 2011 06:40:46 +0000 (14:40 +0800)]
ASoC: Remove unused function declaration in imx-ssi.h
These functions are removed in commit
f0fba2ad
"ASoC: multi-component - ASoC Multi-Component Support".
Let's remove the leftover function declaration in header file.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Peter Ujfalusi [Wed, 5 Oct 2011 07:29:28 +0000 (10:29 +0300)]
ASoC: twl6040: Warn user in twl6040_put_volsw for error case
Let the user know, that the callback has been called with unexpected
register parameter.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Peter Ujfalusi [Wed, 5 Oct 2011 07:29:27 +0000 (10:29 +0300)]
ASoC: core: Remove snd_soc_put_volsw_2r definition
We do not have users for snd_soc_put_volsw_2r anymore.
It can be removed.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Peter Ujfalusi [Wed, 5 Oct 2011 07:29:26 +0000 (10:29 +0300)]
ASoC: twl6040: Simply call snd_soc_put_volsw form the custom code
The ASoC core now have one callback function, which can handle
single, and double register mixer controls.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Peter Ujfalusi [Wed, 5 Oct 2011 07:29:25 +0000 (10:29 +0300)]
ASoC: core: Combine snd_soc_put_volsw/put_volsw_2r functions
Handle the put_volsw/put_volsw_2r in one function.
To avoid build breakage in twl6040 keep the
snd_soc_put_volsw_2r as define, and map it snd_soc_put_volsw.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Peter Ujfalusi [Wed, 5 Oct 2011 07:29:24 +0000 (10:29 +0300)]
ASoC: core: Combine snd_soc_get_volsw/get_volsw_2r functions
Handle the get_volsw/get_volsw_2r in one function.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Peter Ujfalusi [Wed, 5 Oct 2011 07:29:23 +0000 (10:29 +0300)]
ASoC: core: Combine snd_soc_info_volsw/info_volsw_2r functions
Handle the info_volsw/info_volsw_2r in one function.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Peter Ujfalusi [Wed, 5 Oct 2011 07:29:22 +0000 (10:29 +0300)]
ASoC: core: Change SOC_SINGLE/DOUBLE_VALUE representation
SOC_SINGLE/DOUBLE_VALUE is used for mixer controls, where the
bits are within one register.
Assign .rreg to be the same as .reg for these types.
With this change we can tell if the mixer in question:
is mono:
mc->reg == mc->rreg && mc->shift == mc->rshift
is stereo, within single register:
mc->reg == mc->rreg && mc->shift != mc->rshift
is stereo, in two registers:
mc->reg != mc->rreg
The patch provide a small inline function to query, if the mixer
is stereo, or mono.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Peter Ujfalusi [Wed, 5 Oct 2011 07:29:21 +0000 (10:29 +0300)]
ASoC: twl6040: Prepare for core put_volsw/volsw_2r merger
Avoid using the mc->rreg to identify the 2r type of gain control.
Introduce a variable to track this.
This change is needed to avoid breakage with the upcoming volsw volsw_2r
merger.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Peter Ujfalusi [Wed, 5 Oct 2011 07:29:20 +0000 (10:29 +0300)]
ASoC: twl6040: Simplify custom get_volsw callback
The custom get_volsw does not need to call any core get_volsw calls,
since we are returning the shadow values for the gains.
Return -EINVAL in the unlikely event, if the function has been called
for unhandled control. This way we can remove one check in the code.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Peter Ujfalusi [Wed, 5 Oct 2011 07:29:19 +0000 (10:29 +0300)]
ASoC: Consolidate use of controls with custom get/put function
Use the macros for controls require custom get/put function.
This is to make sure that the soc_mixer_control is used
consistently among the drivers.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Arun KS <arunks@mistralsolutions.com>
Cc: Misael Lopez Cruz <misael.lopez@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Wed, 5 Oct 2011 11:09:12 +0000 (12:09 +0100)]
ASoC: Use dapm_mark_dirty() for new DAPM widgets for consistency
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Tue, 4 Oct 2011 21:57:50 +0000 (22:57 +0100)]
ASoC: Stop checking for supplied widgets after we find the first
We don't really care how many widgets a supply is supplying, we just care
if the number is non-zero. This didn't actually produce any improvement
in the test cases I've been using but seems obviously sensible enough that
I'm pushing it out anyway.
We could do a similar thing for other widgets but this may be unhelpful
for further refactorings Liam was working on aiming to allow us to
identify connected audio paths.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Tue, 4 Oct 2011 21:43:31 +0000 (22:43 +0100)]
ASoC: Don't mark the outputs of supplies as dirty on state changes
The whole point of supply widgets is that they aren't inputs to their
sinks so a state change in a supply should never affect the state of the
widget being supplied and we don't need to mark them as dirty.
Power Path Neighbour
Before: 69 727 905
After: 63 607 731
This is particularly useful where supplies affect large portions of the
chip (eg, a bandgap supplying the analogue sections).
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Tue, 4 Oct 2011 21:15:59 +0000 (22:15 +0100)]
ASoC: Only run power_check() on a widget once per run
Some widgets will get power_check() run on them more than once during a
DAPM run, most commonly due to supply widgets checking to see if their
consumers are powered up. It's wasteful to do this so cache the result
of power_check() during a run. For one system I tested this on I got an
improvement of:
Power Path Neighbour
Before: 106 970 1186
After: 69 727 905
from this.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Tue, 4 Oct 2011 21:28:08 +0000 (22:28 +0100)]
ASoC: Add verbose debugging showing why widgets get marked dirty
Help diagnose why we're checking widgets by providing some logging when
we first dirty them. This should possibly be a trace point if it's useful
but can be absurdly verbose if enabled, we can always change it later if
desired.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Mon, 3 Oct 2011 21:36:57 +0000 (22:36 +0100)]
ASoC: Reduce the number of neigbours we mark dirty when updating power
If two widgets are not currently connected then there is no need to
propagate a power state change between them as we mark the affected
widgets when we change a connection. Similarly if a neighbour widget is
already in the state being set for the current widget then there is no
need to recheck.
On one system I tested this gave:
Power Path Neighbour
Before: 114 1066 1327
After: 106 970 1186
which is an improvement, although relatively small.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Mon, 3 Oct 2011 20:06:40 +0000 (21:06 +0100)]
ASoC: Do DAPM power checks only for widgets changed since last run
In order to reduce the number of DAPM power checks we run keep a list of
widgets which have been changed since the last DAPM run and iterate over
that rather than the full widget list. Whenever we change the power state
for a widget we add all the source and sink widgets it has to the dirty
list, ensuring that all widgets in the path are checked.
This covers more widgets than we need to as some of the neighbour widgets
won't be connected but it's simpler as a first step. On one system I tried
this gave:
Power Path Neighbour
Before: 207 1939 2461
After: 114 1066 1327
which seems useful.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Mon, 3 Oct 2011 21:41:09 +0000 (22:41 +0100)]
ASoC: Mark headphone, mic, speaker and line widgets as always connected
We're not actually doing any dynamic power management based on connection
and output drivers (which are pretty much the same thing) are marked as
unconditionally connected already.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Wed, 28 Sep 2011 17:28:23 +0000 (18:28 +0100)]
ASoC: Factor out widget power check operation
We've got the same code in two different places, let's have it in a single
place instead.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Wed, 28 Sep 2011 17:23:53 +0000 (18:23 +0100)]
ASoC: Ensure all DAPM widgets have a power check callback
Makes the code simpler.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Wed, 28 Sep 2011 16:19:47 +0000 (17:19 +0100)]
ASoC: Move bias level decision into main dapm_power_widgets()
Future patches will try to reduce the number of widgets we check on each
DAPM run but we're still going to need to look and see if the devices is
on at all so we can manage the overall device bias. Move these checks out
into the main dapm_power_widgets() function so we don't have to think about
them for now.
Once we're doing more incremental updates it'll probably be worth using
refcounts for each bias level to avoid having to do the sweep over all
widgets but that's not going to be where the big performance wins are.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Wed, 28 Sep 2011 16:02:31 +0000 (17:02 +0100)]
ASoC: Factor write of widget power out into a separate function
Split the decision about what the new power should be out from the
implementation of that decision.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Mon, 3 Oct 2011 21:42:43 +0000 (22:42 +0100)]
regulator: Fix return code from regulator_disable_deferred()
schedule_delayed_work() returns a bool indicating if the work was already
queued when it succeeds so we need to squash a true down to zero.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Fri, 23 Sep 2011 20:26:33 +0000 (21:26 +0100)]
ASoC: Remove direct register cache accesses from WM8962 driver
Also fix return values for speaker switch updates.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org
Peter Ujfalusi [Tue, 4 Oct 2011 11:39:42 +0000 (14:39 +0300)]
ASoC: twl6040: Simplify custom put_volsw callback
Return -EINVAL in the unlikely event, if the function has been called
for unhandled control. This way we can remove one check in the code.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Peter Ujfalusi [Tue, 4 Oct 2011 11:39:39 +0000 (14:39 +0300)]
ASoC: core: Introduce SOC_DOUBLE_R_VALUE macro
With the new macro we can remove duplicated code
for the SOC_DOUBLE_R type of controls.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Peter Ujfalusi [Tue, 4 Oct 2011 11:39:38 +0000 (14:39 +0300)]
ASoC: core: Introduce SOC_DOUBLE_VALUE macro
With the new macro we can remove duplicated code
for the SOC_DOUBLE type of controls.
We can also remap the SOC_SINGLE_VALUE macro to
SOC_DOUBLE_VALUE
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Axel Lin [Tue, 4 Oct 2011 03:45:41 +0000 (11:45 +0800)]
ASoC: Remove unneeded hw_write initialisation in wm8523
It is not required after commit
8d50e447
"ASoC: Factor out I/O for Wolfson 8 bit data 16 bit register CODECs"
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Axel Lin [Tue, 4 Oct 2011 03:44:42 +0000 (11:44 +0800)]
ASoC: Remove unneeded hw_write initialisation in ak4671
It is not required now.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Axel Lin [Tue, 4 Oct 2011 03:15:30 +0000 (11:15 +0800)]
ASoC: wm8711: Use snd_soc_update_bits for read-modify-write
Use snd_soc_update_bits for read-modify-write register access instead of
open-coding it using snd_soc_read and snd_soc_write
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Axel Lin [Tue, 4 Oct 2011 03:18:59 +0000 (11:18 +0800)]
ASoC: wm8988: Use snd_soc_update_bits for read-modify-write
Use snd_soc_update_bits for read-modify-write register access instead of
open-coding it using snd_soc_read and snd_soc_write
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Axel Lin [Tue, 4 Oct 2011 03:17:24 +0000 (11:17 +0800)]
ASoC: wm8750: Use snd_soc_update_bits for read-modify-write
Use snd_soc_update_bits for read-modify-write register access instead of
open-coding it using snd_soc_read and snd_soc_write
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Axel Lin [Mon, 3 Oct 2011 23:44:22 +0000 (07:44 +0800)]
ASoC: Avoid writing to WM8971_RESET in wm8971_resume
Writing to WM8971_RESET resets all registers to the default state.
Thus we should avoid writing to WM8971_RESET on resume.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Mark Brown [Tue, 4 Oct 2011 14:44:43 +0000 (15:44 +0100)]
Merge branch 'for-3.1' into for-3.2
Axel Lin [Tue, 4 Oct 2011 14:07:18 +0000 (22:07 +0800)]
ASoC: wm8994: Fix setting rate_reg for wm8994-aif2
For wm8994-aif2, the rate_reg should be WM8994_AIF2_RATE.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org
Axel Lin [Tue, 4 Oct 2011 12:08:04 +0000 (20:08 +0800)]
ASoC: wm8995: Slightly optimize configure_clock
snd_soc_update_bits() will only write new register value
if the old value is different from the new value.
In additional, snd_soc_update_bits() returns 0 for no change.
No need to read WM8995_CLOCKING_1 register before calling snd_soc_update_bits().
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Axel Lin [Tue, 4 Oct 2011 12:07:03 +0000 (20:07 +0800)]
ASoC: wm8994: Slightly optimize configure_clock
snd_soc_update_bits() will only write new register value
if the old value is different from the new value.
In additional, snd_soc_update_bits() returns 0 for no change.
No need to read WM8994_CLOCKING_1 register before calling snd_soc_update_bits().
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Peter Ujfalusi [Tue, 4 Oct 2011 08:09:52 +0000 (11:09 +0300)]
ASoC: omap-pcm: Fix the no period wakeup implementation
After omap_request_dma the BLOCK_IRQ is enabled as default
configuration for the channel.
If we are requested for no period wakeup, we need to disable
the BLOCK_IRQ in order to not receive any interrupts.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Axel Lin [Tue, 4 Oct 2011 01:59:26 +0000 (09:59 +0800)]
ASoC: wm8988: Use snd_soc_update_bits for read-modify-write
Use snd_soc_update_bits for read-modify-write register access instead of
open-coding it using snd_soc_read and snd_soc_write
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>