OSDN Git Service
Yannick Fertré [Thu, 12 Sep 2019 08:56:29 +0000 (10:56 +0200)]
drm/stm: dsi: higher pll out only in video burst mode
In order to better support video non-burst modes,
the +20% on pll out is added only in burst mode.
Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Reviewed-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1568278589-20400-1-git-send-email-yannick.fertre@st.com
Brian Masney [Thu, 15 Aug 2019 00:48:47 +0000 (20:48 -0400)]
drm/bridge: analogix-anx78xx: convert to i2c_new_dummy_device
The i2c_new_dummy() function is deprecated since it returns NULL on
error. Change this to use the recommended replacement
i2c_new_dummy_device() that returns an error code that can be read with
PTR_ERR() and friends.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190815004854.19860-5-masneyb@onstation.org
Brian Masney [Thu, 15 Aug 2019 00:48:46 +0000 (20:48 -0400)]
drm/bridge: analogix-anx78xx: silence -EPROBE_DEFER warnings
Silence two warning messages that occur due to -EPROBE_DEFER errors to
help cleanup the system boot log.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190815004854.19860-4-masneyb@onstation.org
Brian Masney [Thu, 15 Aug 2019 00:48:45 +0000 (20:48 -0400)]
drm/bridge: analogix-anx78xx: add new variants
Add support for the 7808 variant. While we're here, the of match table
was missing support for the 7812 and 7818 variants, so add them as well.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190815004854.19860-3-masneyb@onstation.org
Brian Masney [Thu, 15 Aug 2019 00:48:44 +0000 (20:48 -0400)]
dt-bindings: drm/bridge: analogix-anx78xx: add new variants
Add support for the analogix,anx7808, analogix,anx7812, and
analogix,anx7818 variants.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190815004854.19860-2-masneyb@onstation.org
Laurent Pinchart [Wed, 21 Aug 2019 23:55:02 +0000 (02:55 +0300)]
drm/bridge: Fix references to drm_bridge_funcs in documentation
The documentation for most of the bridge atomic operations incorrectly
reference the non-atomic version when stating the operations are
optional. Fix them, and make sure that all references to bridge
operations are correctly marked with @.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190821235502.15475-1-laurent.pinchart+renesas@ideasonboard.com
Yakir Yang [Wed, 11 Sep 2019 08:26:46 +0000 (16:26 +0800)]
drm: bridge/dw_hdmi: add audio sample channel status setting
When transmitting IEC60985 linear PCM audio, we configure the
Aduio Sample Channel Status information in the IEC60958 frame.
The status bit is already available in iec.status of hdmi_codec_params.
This fix the issue that audio does not come out on some monitors
(e.g. LG 22CV241)
Note that these registers are only for interfaces:
I2S audio interface, General Purpose Audio (GPA), or AHB audio DMA
(AHBAUDDMA).
For S/PDIF interface this information comes from the stream.
Currently this function dw_hdmi_set_channel_status is only called
from dw-hdmi-i2s-audio in I2S setup.
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911082646.134347-1-cychiang@chromium.org
David Riley [Thu, 12 Sep 2019 16:00:48 +0000 (09:00 -0700)]
drm/virtio: Fix warning in virtio_gpu_queue_fenced_ctrl_buffer.
Fix warning introduced with commit
e1218b8c0cc1
("drm/virtio: Use vmalloc for command buffer allocations.")
from drm-misc-next.
Signed-off-by: David Riley <davidriley@chromium.org>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190912160048.212495-1-davidriley@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Thu, 12 Sep 2019 11:46:27 +0000 (13:46 +0200)]
drm/virtio: enable prime mmap support
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190912114627.20176-1-kraxel@redhat.com
Thomas Zimmermann [Wed, 11 Sep 2019 11:09:10 +0000 (13:09 +0200)]
drm/vram: Unconditonally set BO call-back functions
The statement's condition is always true.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911110910.30698-5-tzimmermann@suse.de
Thomas Zimmermann [Wed, 11 Sep 2019 11:09:09 +0000 (13:09 +0200)]
drm/vram: Unexport internal functions of VRAM MM
The init, cleanup and mmap functions of VRAM MM are only used internally.
Remove them from the public interface.
v2:
* update for debugfs support
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911110910.30698-4-tzimmermann@suse.de
Thomas Zimmermann [Wed, 11 Sep 2019 11:09:08 +0000 (13:09 +0200)]
drm/vram: Have VRAM MM call GEM VRAM functions directly
VRAM MM and GEM VRAM buffer objects are only used with each other;
connected via 3 function pointers. Simplify this code by making the
memory manager call the rsp. functions of the BOs directly; and
remove the functions from the BO's public interface.
v2:
* typos in commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911110910.30698-3-tzimmermann@suse.de
Thomas Zimmermann [Wed, 11 Sep 2019 11:09:07 +0000 (13:09 +0200)]
drm/vram: Move VRAM memory manager to GEM VRAM implementation
The separation between GEM VRAM objects and the memory manager is
artificial, as they are only used with each other. Copying both
implementations into the same file is a first step to simplifying
the code.
This patch only moves code without functional changes.
v3:
* update to use dev->vma_offset_manager
v2:
* update for debugfs support
* typos in commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911110910.30698-2-tzimmermann@suse.de
David Riley [Wed, 11 Sep 2019 18:14:03 +0000 (11:14 -0700)]
drm/virtio: Use vmalloc for command buffer allocations.
Userspace requested command buffer allocations could be too large
to make as a contiguous allocation. Use vmalloc if necessary to
satisfy those allocations.
Signed-off-by: David Riley <davidriley@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190911181403.40909-3-davidriley@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
David Riley [Wed, 11 Sep 2019 18:14:02 +0000 (11:14 -0700)]
drm/virtio: Rewrite virtio_gpu_queue_ctrl_buffer using fenced version.
Factor function in preparation to generating scatterlist prior to locking.
Signed-off-by: David Riley <davidriley@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190911181403.40909-2-davidriley@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Thu, 5 Sep 2019 07:05:09 +0000 (09:05 +0200)]
drm/ttm: remove embedded vma_offset_manager
No users left. Drivers either setup vma_offset_manager themself
(vmwgfx) or pass the gem vma_offset_manager to ttm_bo_device_init
(all other drivers).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190905070509.22407-9-kraxel@redhat.com
Gerd Hoffmann [Thu, 5 Sep 2019 07:05:08 +0000 (09:05 +0200)]
drm/vmwgfx: switch to own vma manager
Add struct drm_vma_offset_manager to vma_private, initialize it and
pass it to ttm_bo_device_init().
With this in place the last user of ttm's embedded vma offset manager
is gone and we can remove it (in a separate patch).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Thomas Hellström <thellstrom@vmware.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190905070509.22407-8-kraxel@redhat.com
Gerd Hoffmann [Thu, 5 Sep 2019 07:05:07 +0000 (09:05 +0200)]
drm/qxl: switch to gem vma offset manager
Pass gem vma_offset_manager to ttm_bo_device_init(), so ttm uses it
instead of its own embedded struct. This makes some gem functions
(specifically drm_gem_object_lookup) work on ttm objects.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20190905070509.22407-7-kraxel@redhat.com
Gerd Hoffmann [Thu, 5 Sep 2019 07:05:06 +0000 (09:05 +0200)]
drm/amdgpu: switch to gem vma offset manager
Pass gem vma_offset_manager to ttm_bo_device_init(), so ttm uses it
instead of its own embedded struct. This makes some gem functions
(specifically drm_gem_object_lookup) work on ttm objects.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190905070509.22407-6-kraxel@redhat.com
Gerd Hoffmann [Thu, 5 Sep 2019 07:05:05 +0000 (09:05 +0200)]
drm/radeon: switch to gem vma offset manager
Pass gem vma_offset_manager to ttm_bo_device_init(), so ttm uses it
instead of its own embedded struct. This makes some gem functions
(specifically drm_gem_object_lookup) work on ttm objects.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190905070509.22407-5-kraxel@redhat.com
Gerd Hoffmann [Thu, 5 Sep 2019 07:05:04 +0000 (09:05 +0200)]
drm/vram: switch to gem vma offset manager
Pass gem vma_offset_manager to ttm_bo_device_init(), so ttm uses it
instead of its own embedded struct. This makes some gem functions
(specifically drm_gem_object_lookup) work on ttm objects.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20190905070509.22407-4-kraxel@redhat.com
Gerd Hoffmann [Thu, 5 Sep 2019 07:05:03 +0000 (09:05 +0200)]
drm/nouveau: switch to gem vma offset manager
Pass gem vma_offset_manager to ttm_bo_device_init(), so ttm uses it
instead of its own embedded struct. This makes some gem functions
(specifically drm_gem_object_lookup) work on ttm objects.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20190905070509.22407-3-kraxel@redhat.com
Gerd Hoffmann [Thu, 5 Sep 2019 07:05:02 +0000 (09:05 +0200)]
drm/ttm: turn ttm_bo_device.vma_manager into a pointer
Rename the embedded struct vma_offset_manager, new name is _vma_manager.
ttm_bo_device.vma_manager changed to a pointer.
The ttm_bo_device_init() function gets an additional vma_manager
argument which allows to initialize ttm with a different vma manager.
When passing NULL the embedded _vma_manager is used.
All callers are updated to pass NULL, so the behavior doesn't change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190905070509.22407-2-kraxel@redhat.com
Gerd Hoffmann [Wed, 4 Sep 2019 05:47:40 +0000 (07:47 +0200)]
drm/vram: fix Kconfig
select isn't recursive, so we can't turn on DRM_TTM + DRM_TTM_HELPER
in config DRM_VRAM_HELPER, we have to select them on the vram users
instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20190904054740.20817-8-kraxel@redhat.com
Gerd Hoffmann [Wed, 4 Sep 2019 05:47:39 +0000 (07:47 +0200)]
drm/qxl: use drm_gem_ttm_print_info
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20190904054740.20817-7-kraxel@redhat.com
Gerd Hoffmann [Wed, 4 Sep 2019 05:47:38 +0000 (07:47 +0200)]
drm/qxl: use drm_gem_object_funcs callbacks
Switch qxl to use drm_gem_object_funcs callbacks
instead of drm_driver callbacks.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20190904054740.20817-6-kraxel@redhat.com
Gerd Hoffmann [Wed, 4 Sep 2019 05:47:37 +0000 (07:47 +0200)]
drm/vram: add vram-mm debugfs file
Wire up drm_mm_print() for vram helpers, using a new
debugfs file, so one can see how vram is used:
# cat /sys/kernel/debug/dri/0/vram-mm
0x0000000000000000-0x0000000000000300: 768: used
0x0000000000000300-0x0000000000000600: 768: used
0x0000000000000600-0x0000000000000900: 768: used
0x0000000000000900-0x0000000000000c00: 768: used
0x0000000000000c00-0x0000000000004000: 13312: free
total: 16384, used 3072 free 13312
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20190904054740.20817-5-kraxel@redhat.com
Gerd Hoffmann [Wed, 4 Sep 2019 05:47:36 +0000 (07:47 +0200)]
drm/vram: use drm_gem_ttm_print_info
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20190904054740.20817-4-kraxel@redhat.com
Gerd Hoffmann [Wed, 4 Sep 2019 05:47:35 +0000 (07:47 +0200)]
drm/ttm: add drm gem ttm helpers, starting with drm_gem_ttm_print_info()
Now with ttm_buffer_object being a subclass of drm_gem_object we can
easily lookup ttm_buffer_object for a given drm_gem_object, which in
turn allows to create common helper functions.
This patch starts off with a drm_gem_ttm_print_info() helper function
which adds some ttm specific lines to the debug output.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20190904054740.20817-3-kraxel@redhat.com
Gerd Hoffmann [Wed, 4 Sep 2019 05:47:34 +0000 (07:47 +0200)]
drm: add drm_print_bits
New helper to print named bits of some value (think flags fields).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20190904054740.20817-2-kraxel@redhat.com
Thomas Zimmermann [Fri, 6 Sep 2019 12:20:56 +0000 (14:20 +0200)]
drm/vram: Implement lazy unmapping for GEM VRAM buffers
Frequent mapping and unmapping a buffer object adds overhead for
modifying the page table and creates debug output. Unmapping a buffer
is only required when the memory manager evicts the buffer from its
current location.
v4:
* WARN_ON if buffer is still mapped during BO cleanup
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reported-and-tested-by: Davidlohr Bueso <dbueso@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20190906122056.32018-5-tzimmermann@suse.de
Thomas Zimmermann [Fri, 6 Sep 2019 12:20:55 +0000 (14:20 +0200)]
drm/vram: Add infrastructure for move_notify()
This patch prepares VRAM helpers for lazy unmapping of buffer objects.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reported-and-tested-by: Davidlohr Bueso <dbueso@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20190906122056.32018-4-tzimmermann@suse.de
Thomas Zimmermann [Fri, 6 Sep 2019 12:20:54 +0000 (14:20 +0200)]
drm/vram: Acquire lock only once per call to vmap()/vunmap()
The implementation of vmap() is a combined pin() and kmap(). As both
functions share the same lock, we can make vmap() slightly faster by
acquiring the lock only once for both operations. Same for the inverse,
vunmap().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reported-and-tested-by: Davidlohr Bueso <dbueso@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20190906122056.32018-3-tzimmermann@suse.de
Thomas Zimmermann [Fri, 6 Sep 2019 12:20:53 +0000 (14:20 +0200)]
drm/vram: Add kmap ref-counting to GEM VRAM objects
The kmap and kunmap operations of GEM VRAM buffers can now be called
in interleaving pairs. The first call to drm_gem_vram_kmap() maps the
buffer's memory to kernel address space and the final call to
drm_gem_vram_kunmap() unmaps the memory. Intermediate calls to these
functions increment or decrement a reference counter.
This change allows for keeping buffer memory mapped for longer and
minimizes the amount of changes to TLB, page tables, etc.
v4:
* lock in kmap()/kunmap() with ttm_bo_reserve()
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reported-and-tested-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190906122056.32018-2-tzimmermann@suse.de
Dariusz Marcinkiewicz [Wed, 14 Aug 2019 10:45:02 +0000 (12:45 +0200)]
tda9950: use cec_notifier_cec_adap_(un)register
Use the new cec_notifier_cec_adap_(un)register() functions to
(un)register the notifier for the CEC adapter.
Signed-off-by: Dariusz Marcinkiewicz <darekm@google.com>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20190814104520.6001-5-darekm@google.com
Dariusz Marcinkiewicz [Wed, 28 Aug 2019 12:34:15 +0000 (14:34 +0200)]
drm: exynos: exynos_hdmi: use cec_notifier_conn_(un)register
Use the new cec_notifier_conn_(un)register() functions to
(un)register the notifier for the HDMI connector, and fill in
the cec_connector_info.
Changes since v7:
- err_runtime_disable -> err_rpm_disable
Changes since v2:
- removed unnecessary call to invalidate phys address before
deregistering the notifier,
- use cec_notifier_phys_addr_invalidate instead of setting
invalid address on a notifier.
Signed-off-by: Dariusz Marcinkiewicz <darekm@google.com>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: use 'if (!hdata->notifier)' instead of '== NULL']
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20190828123415.139441-1-darekm@google.com
Hans Verkuil [Fri, 23 Aug 2019 11:24:26 +0000 (13:24 +0200)]
drm/sun4i/sun4i_hdmi_enc: call cec_s_conn_info()
Set the connector info for the CEC adapter. This helps
userspace to associate the CEC device with the HDMI connector.
Tested on a Cubieboard.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823112427.42394-3-hverkuil-cisco@xs4all.nl
Yannick Fertré [Fri, 6 Sep 2019 09:21:48 +0000 (11:21 +0200)]
drm/stm: ltdc: add pinctrl for DPI encoder mode
The implementation of functions encoder_enable and encoder_disable
make possible to control the pinctrl according to the encoder type.
The pinctrl must be activated only if the encoder type is DPI.
This helps to move the DPI-related pinctrl configuration from
all the panel or bridge to the LTDC dt node.
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1567761708-31777-1-git-send-email-yannick.fertre@st.com
Laurent Pinchart [Wed, 4 Sep 2019 13:37:23 +0000 (16:37 +0300)]
drm/panel: panel-simple: Set OSD070T1718 panel type
The OSD070T1718 is a DPI panel, set its type accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904133723.30418-1-laurent.pinchart@ideasonboard.com
Laurent Pinchart [Wed, 4 Sep 2019 13:28:04 +0000 (16:28 +0300)]
drm/bridge: panel: Infer connector type from panel by default
The drm panel bridge creates a connector using a connector type
explicitly passed by the display controller or bridge driver that
instantiates the panel bridge. Now that drm_panel reports its connector
type, we can use it to avoid passing an explicit (and often incorrect)
connector type to drm_panel_bridge_add() and
devm_drm_panel_bridge_add().
Several drivers report incorrect or unknown connector types to
userspace. Reporting a different type may result in a breakage. For that
reason, rename (devm_)drm_panel_bridge_add() to
(devm_)drm_panel_bridge_add_typed(), and add new
(devm_)drm_panel_bridge_add() functions that use the panel connector
type. Update all callers of (devm_)drm_panel_bridge_add() to the _typed
function, they will be converted one by one after testing.
The panel drivers have been updated with the following Coccinelle
semantic patch, with manual inspection and fixes to indentation.
@@
expression bridge;
expression dev;
expression panel;
identifier type;
@@
(
-bridge = drm_panel_bridge_add(panel, type);
+bridge = drm_panel_bridge_add_typed(panel, type);
|
-bridge = devm_drm_panel_bridge_add(dev, panel, type);
+bridge = devm_drm_panel_bridge_add_typed(dev, panel, type);
)
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904132804.29680-3-laurent.pinchart@ideasonboard.com
Laurent Pinchart [Wed, 4 Sep 2019 13:28:03 +0000 (16:28 +0300)]
drm/panel: Add and fill drm_panel type field
Add a type field to the drm_panel structure to report the panel type,
using DRM_MODE_CONNECTOR_* macros (the values that make sense are LVDS,
eDP, DSI and DPI). This will be used to initialise the corresponding
connector type.
Update all panel drivers accordingly. The panel-simple driver only
specifies the type for the known to be LVDS panels, while all other
panels are left as unknown and will be converted on a case-by-case
basis as they all need to be carefully reviewed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904132804.29680-2-laurent.pinchart@ideasonboard.com
Arnd Bergmann [Fri, 6 Sep 2019 15:13:00 +0000 (17:13 +0200)]
fbdev/sa1100fb: Remove even more dead code
This function lost its only call site as part of
earlier dead code removal, so remove it as well:
drivers/video/fbdev/sa1100fb.c:975:21: error: unused function 'sa1100fb_min_dma_period' [-Werror,-Wunused-function]
Fixes:
390e5de11284 ("fbdev/sa1100fb: Remove dead code")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190906151307.1127187-1-arnd@arndb.de
Daniel Vetter [Fri, 6 Sep 2019 14:44:59 +0000 (16:44 +0200)]
drm/blend: Define the direction of Z position values
We forgot that.
Proof is the one igt testcase we have:
https://gitlab.freedesktop.org/drm/igt-gpu-tools/blob/master/tests/kms_atomic.c#L280
While at it also document that we have immutable zpos properties in
some cases.
Reported-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Acked-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190906144459.16025-1-daniel.vetter@ffwll.ch
Daniel Vetter [Wed, 4 Sep 2019 14:39:42 +0000 (16:39 +0200)]
drm: Use EOPNOTSUPP, not ENOTSUPP
- it's what we recommend in our docs:
https://dri.freedesktop.org/docs/drm/gpu/drm-uapi.html#recommended-ioctl-return-values
- it's the overwhelmingly used error code for "operation not
supported", at least in drm core (slightly less so in drivers):
$ git grep EOPNOTSUPP -- drivers/gpu/drm/*c | wc -l
83
$ git grep ENOTSUPP -- drivers/gpu/drm/*c | wc -l
5
- include/linux/errno.h makes it fairly clear that these are for nfsv3
(plus they also have error codes above 512, which is the block with
some special behaviour ...)
/* Defined for the NFSv3 protocol */
If the above isn't reflecting current practice, then I guess we should
at least update the docs.
Noralf commented:
Ben Hutchings made this comment[1] in a thread about use of ENOTSUPP in
drivers:
glibc's strerror() returns these strings for ENOTSUPP and EOPNOTSUPP
respectively:
"Unknown error 524"
"Operation not supported"
So at least for errors returned to userspace EOPNOTSUPP makes sense.
José asked:
> Hopefully this will not break any userspace
None of the functions in drm_edid.c affected by this reach userspace,
it's all driver internal.
Same for the mipi function, that error code should be handled by
drivers. Drivers are supposed to remap "the hw is on fire" to EIO when
reporting up to userspace, but I think if a driver sees this it would
be a driver bug.
v2: Augment commit message with comments from Noralf and José
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Sean Paul <sean@poorly.run>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Andres Rodriguez <andresx7@gmail.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904143942.31756-1-daniel.vetter@ffwll.ch
Gerd Hoffmann [Wed, 4 Sep 2019 07:48:28 +0000 (09:48 +0200)]
drm/virtio: fix command submission with objects but without fence.
Only call virtio_gpu_array_add_fence if we actually have a fence.
Fixes:
da758d51968a ("drm/virtio: rework virtio_gpu_execbuffer_ioctl fencing")
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190904074828.32502-1-kraxel@redhat.com
Gerd Hoffmann [Fri, 30 Aug 2019 06:01:16 +0000 (08:01 +0200)]
drm/virtio: add worker for object release
Move object release into a separate worker. Releasing objects requires
sending commands to the host. Doing that in the dequeue worker will
cause deadlocks in case the command queue gets filled up, because the
dequeue worker is also the one which will free up slots in the command
queue.
Reported-by: Chia-I Wu <olvaffe@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Tested-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190830060116.10476-1-kraxel@redhat.com
Gerd Hoffmann [Thu, 29 Aug 2019 10:33:01 +0000 (12:33 +0200)]
drm/virtio: add fence sanity check
Make sure we don't leak half-initialized fences outside the driver.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190829103301.3539-19-kraxel@redhat.com
Gerd Hoffmann [Thu, 29 Aug 2019 10:33:00 +0000 (12:33 +0200)]
drm/virtio: drop virtio_gpu_object_{reserve, unreserve}
No users left.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190829103301.3539-18-kraxel@redhat.com
Gerd Hoffmann [Thu, 29 Aug 2019 10:32:59 +0000 (12:32 +0200)]
drm/virtio: drop virtio_gpu_object_{ref,unref}
No users left.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190829103301.3539-17-kraxel@redhat.com
Gerd Hoffmann [Thu, 29 Aug 2019 10:32:58 +0000 (12:32 +0200)]
drm/virtio: remove virtio_gpu_alloc_object
Thin wrapper around virtio_gpu_object_create(),
but calling that directly works equally well.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190829103301.3539-16-kraxel@redhat.com
Gerd Hoffmann [Thu, 29 Aug 2019 10:32:57 +0000 (12:32 +0200)]
drm/virtio: switch from ttm to gem shmem helpers
virtio-gpu basically needs a sg_table for the bo, to tell the host where
the backing pages for the object are. So the gem shmem helpers are a
perfect fit. Some drm_gem_object_funcs need thin wrappers to update the
host state, but otherwise the helpers handle everything just fine.
Once the fencing was sorted the switch was surprisingly easy and for the
most part just removing the ttm code.
v4: fix drm_gem_object_funcs name.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190829103301.3539-15-kraxel@redhat.com
Gerd Hoffmann [Thu, 29 Aug 2019 10:32:56 +0000 (12:32 +0200)]
drm/virtio: drop virtio_gpu_object_list_validate/virtio_gpu_unref_list
No users left.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190829103301.3539-14-kraxel@redhat.com
Gerd Hoffmann [Thu, 29 Aug 2019 10:32:55 +0000 (12:32 +0200)]
drm/virtio: rework virtio_gpu_cmd_context_{attach, detach}_resource
Switch to the virtio_gpu_array_* helper workflow.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190829103301.3539-13-kraxel@redhat.com
Gerd Hoffmann [Thu, 29 Aug 2019 10:32:54 +0000 (12:32 +0200)]
drm/virtio: rework virtio_gpu_transfer_to_host_ioctl fencing
Switch to the virtio_gpu_array_* helper workflow.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190829103301.3539-12-kraxel@redhat.com
Gerd Hoffmann [Thu, 29 Aug 2019 10:32:53 +0000 (12:32 +0200)]
drm/virtio: rework virtio_gpu_transfer_from_host_ioctl fencing
Switch to the virtio_gpu_array_* helper workflow.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190829103301.3539-11-kraxel@redhat.com
Gerd Hoffmann [Thu, 29 Aug 2019 10:32:52 +0000 (12:32 +0200)]
drm/virtio: rework virtio_gpu_object_create fencing
Rework fencing workflow. Stop using ttm helpers, use the
virtio_gpu_array_* helpers instead.
Due to using the gem reservation object it is initialized and ready for
use before calling ttm_bo_init. So we can simply use the standard
fencing workflow and drop the tricky logic which checks whenever the
command is in flight still.
v6: rewrite most of the patch.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190829103301.3539-10-kraxel@redhat.com
Gerd Hoffmann [Thu, 29 Aug 2019 10:32:51 +0000 (12:32 +0200)]
drm/virtio: rework virtio_gpu_execbuffer_ioctl fencing
Rework fencing workflow, starting with virtio_gpu_execbuffer_ioctl.
Stop using ttm helpers, use the virtio_gpu_array_* helpers (which work
on the reservation objects directly) instead.
Also store the object array in struct virtio_gpu_vbuffer, so we
explicitly keep a reference of all buffers used instead of depending
on ttm_bo_put() checking whenever the object is actually idle before
releasing it.
New workflow:
(1) All gem objects needed by a command are added to a
virtio_gpu_object_array.
(2) All reservation objects will be locked (virtio_gpu_array_lock_resv).
(3) virtio_gpu_fence_emit() completes fence initialization.
(4) fence gets added to the objects, reservation objects are unlocked
(virtio_gpu_array_add_fence, virtio_gpu_array_unlock_resv).
(5) virtio command is submitted to the host.
(6) The completion callback (virtio_gpu_dequeue_ctrl_func)
will drop object references and free virtio_gpu_object_array.
v6: rewrite most of the patch.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190829103301.3539-9-kraxel@redhat.com
Gerd Hoffmann [Thu, 29 Aug 2019 10:32:50 +0000 (12:32 +0200)]
drm/virtio: add virtio_gpu_object_array & helpers
Some helper functions to manage an array of gem objects.
v9: use dma_resv_lock_interruptible.
v6:
- add ticket to struct virtio_gpu_object_array.
- add virtio_gpu_array_{lock,unlock}_resv helpers.
- add virtio_gpu_array_add_fence helper.
v5: some small optimizations (Chia-I Wu).
v4: make them virtio-private instead of generic helpers.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190829103301.3539-8-kraxel@redhat.com
Gerd Hoffmann [Thu, 29 Aug 2019 10:32:49 +0000 (12:32 +0200)]
drm/virtio: remove ttm calls from in virtio_gpu_object_{reserve, unreserve}
Call reservation_object_* directly instead
of using ttm_bo_{reserve,unreserve}.
v4: check for EINTR only.
v3: check for EINTR too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190829103301.3539-7-kraxel@redhat.com
Gerd Hoffmann [Thu, 29 Aug 2019 10:32:48 +0000 (12:32 +0200)]
drm/virtio: drop no_wait argument from virtio_gpu_object_reserve
All callers pass no_wait = false.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190829103301.3539-6-kraxel@redhat.com
Gerd Hoffmann [Thu, 29 Aug 2019 10:32:47 +0000 (12:32 +0200)]
drm/virtio: remove virtio_gpu_object_wait
No users left.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190829103301.3539-5-kraxel@redhat.com
Gerd Hoffmann [Thu, 29 Aug 2019 10:32:46 +0000 (12:32 +0200)]
drm/virtio: simplify cursor updates
No need to do the reservation dance,
we can just wait on the fence directly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190829103301.3539-4-kraxel@redhat.com
Gerd Hoffmann [Thu, 29 Aug 2019 10:32:45 +0000 (12:32 +0200)]
drm/virtio: switch virtio_gpu_wait_ioctl() to gem helper.
Use drm_gem_reservation_object_wait() in virtio_gpu_wait_ioctl().
This also makes the ioctl run lockless.
v9: fix return value.
v5: handle lookup failure.
v2: use reservation_object_test_signaled_rcu for VIRTGPU_WAIT_NOWAIT.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190829103301.3539-3-kraxel@redhat.com
Gerd Hoffmann [Thu, 29 Aug 2019 10:32:44 +0000 (12:32 +0200)]
drm/virtio: pass gem reservation object to ttm init
With this gem and ttm will use the same reservation object,
so mixing and matching ttm / gem reservation helpers should
work fine.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190829103301.3539-2-kraxel@redhat.com
Lyude Paul [Tue, 3 Sep 2019 20:45:53 +0000 (16:45 -0400)]
drm/dp_mst: Cleanup drm_dp_send_link_address() a bit
Declare local pointer to the drm_dp_link_address_ack_reply struct
instead of constantly dereferencing it through the union in
txmsg->reply. Then, invert the order of conditionals so we don't have to
do the bulk of the work inside them, and can wrap lines even less. Then
finally, rearrange variable declarations a bit.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-16-lyude@redhat.com
Lyude Paul [Tue, 3 Sep 2019 20:45:51 +0000 (16:45 -0400)]
drm/dp_mst: Refactor drm_dp_mst_handle_down_rep()
* Remove the big ugly have_eomt conditional
* Store &mgr->down_rep_recv.initial_hdr in a var to make line wrapping
easier
* Remove duplicate memset() calls
* Actually wrap lines
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-14-lyude@redhat.com
Lyude Paul [Tue, 3 Sep 2019 20:45:50 +0000 (16:45 -0400)]
drm/dp_mst: Refactor drm_dp_mst_handle_up_req()
There's a couple of changes here, so to summarize:
* Remove the big ugly mgr->up_req_recv.have_eomt conditional to save on
indenting
* Store &mgr->up_req_recv.initial_hdr in a variable so we don't keep
going over 80 character long lines
* De-duplicate code for calling drm_dp_send_up_ack_reply() and getting
the MSTB via it's GUID
* Remove all of the duplicate calls to memset() and just use a goto
instead
* Actually do line wrapping
* Remove the unnecessary if (mstb) check before calling
drm_dp_mst_topology_put_mstb() - we are guaranteed to always have
mstb != NULL at that point in the function
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-13-lyude@redhat.com
Lyude Paul [Tue, 3 Sep 2019 20:45:49 +0000 (16:45 -0400)]
drm/dp_mst: Constify guid in drm_dp_get_mst_branch_by_guid()
And it's helper, we'll be using this in just a moment.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-12-lyude@redhat.com
Lyude Paul [Tue, 3 Sep 2019 20:45:48 +0000 (16:45 -0400)]
drm/dp_mst: Remove huge conditional in drm_dp_mst_handle_up_req()
Which reduces indentation and makes this function more legible.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-11-lyude@redhat.com
Lyude Paul [Tue, 3 Sep 2019 20:45:47 +0000 (16:45 -0400)]
drm/dp_mst: Refactor drm_dp_send_enum_path_resources
Use more pointers so we don't have to write out
txmsg->reply.u.path_resources each time. Also, fix line wrapping +
rearrange local variables.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-10-lyude@redhat.com
Lyude Paul [Tue, 3 Sep 2019 20:45:45 +0000 (16:45 -0400)]
drm/dp_mst: Add sideband down request tracing + selftests
Unfortunately the DP MST helpers do not have much in the way of
debugging utilities. So, let's add some!
This adds basic debugging output for down sideband requests that we send
from the driver, so that we can actually discern what's happening when
sideband requests timeout.
Since there wasn't really a good way of testing that any of this worked,
I ended up writing simple selftests that lightly test sideband message
encoding and decoding as well. Enjoy!
Changes since v1:
* Clean up DO_TEST() and sideband_msg_req_encode_decode() - danvet
* Get rid of pr_fmt(), just define a prefix string instead and use
drm_printf()
* Check highest bit of VCPI in drm_dp_decode_sideband_req() - danvet
* Make the switch case order between drm_dp_decode_sideband_req() and
drm_dp_encode_sideband_req() the same - danvet
* Only check DRM_UT_DP - danvet
* Clean up sideband_msg_req_equal() from selftests a bit, and add
comments explaining why we can't just use memcmp - danvet
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-8-lyude@redhat.com
Lyude Paul [Tue, 3 Sep 2019 21:57:02 +0000 (17:57 -0400)]
drm/dp_mst: Combine redundant cases in drm_dp_encode_sideband_req()
Noticed this while working on adding a drm_dp_decode_sideband_req().
DP_POWER_DOWN_PHY/DP_POWER_UP_PHY both use the same struct as
DP_ENUM_PATH_RESOURCES, so we can just combine their cases.
Changes since v2:
* Fix commit message
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903215702.16984-1-lyude@redhat.com
Lyude Paul [Tue, 3 Sep 2019 20:45:43 +0000 (16:45 -0400)]
drm/print: Add drm_err_printer()
A simple convienence function that returns a drm_printer which prints
using pr_err()
Changes since v1:
* Make __drm_printfn_err() more consistent with DRM_ERROR() - danvet
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-6-lyude@redhat.com
Lyude Paul [Tue, 3 Sep 2019 20:45:42 +0000 (16:45 -0400)]
drm/dp_mst: Move test_calc_pbn_mode() into an actual selftest
Yes, apparently we've been testing this for every single driver load for
quite a long time now. At least that means our PBN calculation is solid!
Anyway, introduce self tests for MST and move this into there.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-5-lyude@redhat.com
Lyude Paul [Tue, 3 Sep 2019 20:45:40 +0000 (16:45 -0400)]
drm/dp_mst: Get rid of list clear in destroy_connector_work
This seems to be some leftover detritus from before the port/mstb kref
cleanup and doesn't do anything anymore, so get rid of it.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-3-lyude@redhat.com
Lyude Paul [Tue, 3 Sep 2019 20:45:39 +0000 (16:45 -0400)]
drm/dp_mst: Move link address dumping into a function
Makes things easier to read.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-2-lyude@redhat.com
Daniel Vetter [Fri, 19 Jul 2019 15:23:14 +0000 (17:23 +0200)]
drm/vkms: Reduce critical section in vblank_simulate
We can reduce the critical section in vkms_vblank_simulate under
output->lock quite a lot:
- hrtimer_forward_now just needs to be ordered correctly wrt
drm_crtc_handle_vblank. We already access the hrtimer timestamp
without locks. While auditing that I noticed that we don't correctly
annotate the read there, so sprinkle a READ_ONCE to make sure the
compiler doesn't do anything foolish.
- drm_crtc_handle_vblank must stay under the lock to avoid races with
drm_crtc_arm_vblank_event.
- The access to vkms_ouptut->crc_state also must stay under the lock.
- next problem is making sure the output->state structure doesn't get
freed too early. First we rely on a given hrtimer being serialized:
If we call drm_crtc_handle_vblank, then we are guaranteed that the
previous call to vkms_vblank_simulate has completed. The other side
of the coin is that the atomic updates waits for the vblank to
happen before it releases the old state. Both taken together means
that by the time the atomic update releases the old state, the
hrtimer won't access it anymore (it might be accessing the new state
at the same time, but that's ok).
- state is invariant, except the few fields separate protected by
state->crc_lock. So no need to hold the lock for that.
- finally the queue_work. We need to make sure there's no races with
the flush_work, i.e. when we call flush_work we need to guarantee
that the hrtimer can't requeue the work again. This is guaranteed by
the same vblank/hrtimer ordering guarantees like the reasoning above
why state won't be freed too early: flush_work on the old state is
called after wait_for_flip_done in the atomic commit code.
Therefore we can also move everything after the output->crc_state out
of the critical section.
Motivated by suggestions from Rodrigo.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719152314.7706-3-daniel.vetter@ffwll.ch
Daniel Vetter [Fri, 19 Jul 2019 15:23:13 +0000 (17:23 +0200)]
drm/vkms: Use wait_for_flip_done
It's the recommended version, wait_for_vblanks is a bit a hacky
interim thing that predates all the flip_done tracking. It's
unfortunately still the default ...
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719152314.7706-2-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 23 Jul 2019 13:13:37 +0000 (15:13 +0200)]
drm/vblank: Document and fix vblank count barrier semantics
Noticed while reviewing code. I'm not sure whether this might or might
not explain some of the missed vblank hilarity we've been seeing on
various drivers (but those got tracked down to driver issues, at least
mostly). I think those all go through the vblank completion event,
which has unconditional barriers - it always takes the spinlock.
Therefore no cc stable.
v2:
- Barrriers are hard, put them in in the right order (Chris).
- Improve the comments a bit.
v3:
Ville noticed that on 32bit we might be breaking up the load/stores,
now that the vblank counter has been switched over to be 64 bit. Fix
that up by switching to atomic64_t. This this happens so rarely in
practice I figured no need to cc: stable ...
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Keith Packard <keithp@keithp.com>
References:
570e86963a51 ("drm: Widen vblank count to 64-bits [v3]")
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723131337.22031-1-daniel.vetter@ffwll.ch
Mihail Atanassov [Wed, 28 Aug 2019 11:03:49 +0000 (11:03 +0000)]
drm/komeda: Add ACLK rate to sysfs
Expose node with the name 'aclk_hz'
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Ayan kumar halder <ayan.halder@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190828110342.45936-1-mihail.atanassov@arm.com
Heinrich Fink [Mon, 2 Sep 2019 14:24:12 +0000 (16:24 +0200)]
drm: Add high-precision time to vblank trace event
Store the timestamp of the current vblank in the new field 'time' of the
vblank trace event. If the timestamp is calculated by a driver that
supports high-precision vblank timing, set the field 'high-prec' to
'true'.
User space can now access actual hardware vblank times via the tracing
infrastructure. Tracing applications (such as GPUVis, see [0] for
related discussion), can use the newly added information to conduct a
more accurate analysis of display timing.
v2 Fix author name (missing last name)
[0] https://github.com/mikesart/gpuvis/issues/30
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Heinrich Fink <heinrich.fink@daqri.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190902142412.27846-2-heinrich.fink@daqri.com
Linus Walleij [Fri, 23 Aug 2019 07:14:28 +0000 (09:14 +0200)]
drm/sti: Include the right header
The sti_hdmi.c file include <linux/of_gpio.h> despite not even
using any GPIOs.
What it does use is devm_ioremap_nocache() which comes from
<linux/io.h> implicitly by including that header.
Fix this up by including the right header instead.
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823071428.6155-1-linus.walleij@linaro.org
Dariusz Marcinkiewicz [Wed, 14 Aug 2019 10:45:04 +0000 (12:45 +0200)]
drm: sti: use cec_notifier_conn_(un)register
Use the new cec_notifier_conn_(un)register() functions to
(un)register the notifier for the HDMI connector, and fill
in the cec_connector_info.
Changes since v2:
Don't invalidate physical address before unregistering the
notifier.
Signed-off-by: Dariusz Marcinkiewicz <darekm@google.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190814104520.6001-7-darekm@google.com
Cheng-Yi Chiang [Mon, 2 Sep 2019 03:54:35 +0000 (11:54 +0800)]
drm: dw-hdmi-i2s: enable audio clock in audio_startup
In the designware databook, the sequence of enabling audio clock and
setting format is not clearly specified.
Currently, audio clock is enabled in the end of hw_param ops after
setting format.
On some monitors, there is a possibility that audio does not come out.
Fix this by enabling audio clock in audio_startup ops
before hw_param ops setting format.
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190902035435.44463-1-cychiang@chromium.org
Sean Paul [Thu, 29 Aug 2019 16:52:19 +0000 (12:52 -0400)]
drm: mst: Fix query_payload ack reply struct
Spec says[1] Allocated_PBN is 16 bits
[1]- DisplayPort 1.2 Spec, Section 2.11.9.8, Table 2-98
Fixes:
ad7f8a1f9ced ("drm/helper: add Displayport multi-stream helper (v0.6)")
Cc: Lyude Paul <lyude@redhat.com>
Cc: Todd Previte <tprevite@gmail.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190829165223.129662-1-sean@poorly.run
Laurent Pinchart [Fri, 23 Aug 2019 21:23:53 +0000 (00:23 +0300)]
drm/ingenic: Hardcode panel type to DPI
The ingenic driver supports DPI panels only at the moment, so hardcode
their type to DPI instead of Unknown.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823212353.29369-1-laurent.pinchart@ideasonboard.com
# *** extracted tags ***
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Boris Brezillon [Mon, 26 Aug 2019 15:26:36 +0000 (17:26 +0200)]
drm/msm: Use drm_attach_bridge() to attach a bridge to an encoder
This is part of our attempt to make the bridge chain a double-linked
list based on the generic list helpers. In order to do that, we must
patch all drivers manipulating the encoder->bridge field directly.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190826152649.13820-9-boris.brezillon@collabora.com
Boris Brezillon [Mon, 26 Aug 2019 15:26:29 +0000 (17:26 +0200)]
drm: Stop including drm_bridge.h from drm_crtc.h
We are about to add a drm_bridge_state that inherits from
drm_private_state which is defined in drm_atomic.h. Problem is,
drm_atomic.h includes drm_crtc.h which in turn includes drm_bridge.h,
leading to "drm_private_state has incomplete type" error.
Let's force all users of the drm_bridge API to explicitly include
drm_bridge.h.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190826152649.13820-2-boris.brezillon@collabora.com
Neil Armstrong [Tue, 27 Aug 2019 09:58:25 +0000 (11:58 +0200)]
drm/meson: add resume/suspend hooks
Add the suspend and resume hooks to:
- save and disable the entire DRM driver on suspend
- re-init the entire VPU subsystem on resume, to recover CRTC and pixel
generator functionnal usage after DDR suspend, then recover DRM driver
state
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190827095825.21015-3-narmstrong@baylibre.com
Neil Armstrong [Tue, 27 Aug 2019 09:58:24 +0000 (11:58 +0200)]
drm/meson: dw_hdmi: add resume/suspend hooks
Add the suspend and resume hooks to:
- reset the whole HDMI glue and HDMI controller on suspend
- re-init the HDMI glue and HDMI controller on resume
The HDMI glue init is refactored to be re-used from the resume hook.
It makes usage of dw_hdmi_resume() to recover a functionnal DDC bus.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Kevin Hilman <khilman@baylibre.com>
[narmstrong: fixed typo in commit log, and rebased on drm-misc-next]
Link: https://patchwork.freedesktop.org/patch/msgid/20190827095825.21015-2-narmstrong@baylibre.com
Stephen Rothwell [Wed, 28 Aug 2019 08:55:16 +0000 (18:55 +1000)]
drm/virtio: module_param_named() requires linux/moduleparam.h
Fixes:
3e93bc2a58aa ("drm/virtio: make resource id workaround runtime switchable.")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: http://patchwork.freedesktop.org/patch/msgid/20190828185516.22b03da8@canb.auug.org.au
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Tue, 13 Aug 2019 08:25:09 +0000 (10:25 +0200)]
drm/virtio: notify virtqueues without holding spinlock
Split virtqueue_kick() call into virtqueue_kick_prepare(), which
requires serialization, and virtqueue_notify(), which does not. Move
the virtqueue_notify() call out of the critical section protected by the
queue lock. This avoids triggering a vmexit while holding the lock and
thereby fixes a rather bad spinlock contention.
Suggested-by: Chia-I Wu <olvaffe@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190813082509.29324-3-kraxel@redhat.com
Gerd Hoffmann [Tue, 13 Aug 2019 08:25:08 +0000 (10:25 +0200)]
drm/virtio: cleanup queue functions
Make the queue functions return void, none of
the call sites checks the return value.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190813082509.29324-2-kraxel@redhat.com
Gerd Hoffmann [Thu, 22 Aug 2019 09:46:57 +0000 (11:46 +0200)]
drm/virtio: add plane check
Use drm_atomic_helper_check_plane_state()
to sanity check the plane state.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190822094657.27483-1-kraxel@redhat.com
Dariusz Marcinkiewicz [Fri, 23 Aug 2019 11:24:25 +0000 (13:24 +0200)]
drm/vc4/vc4_hdmi: fill in connector info
Fill in the connector info, allowing userspace to associate
the CEC device with the drm connector.
Tested on a Raspberry Pi 3B.
Signed-off-by: Dariusz Marcinkiewicz <darekm@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823112427.42394-2-hverkuil-cisco@xs4all.nl
Dariusz Marcinkiewicz [Wed, 14 Aug 2019 10:45:00 +0000 (12:45 +0200)]
drm/i915/intel_hdmi: use cec_notifier_conn_(un)register
Use the new cec_notifier_conn_(un)register() functions to
(un)register the notifier for the HDMI connector, and fill in
the cec_connector_info.
Signed-off-by: Dariusz Marcinkiewicz <darekm@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20190814104520.6001-3-darekm@google.com
Dariusz Marcinkiewicz [Wed, 14 Aug 2019 10:44:59 +0000 (12:44 +0200)]
drm_dp_cec: add connector info support.
Pass the connector info to the CEC adapter. This makes it possible
to associate the CEC adapter with the corresponding drm connector.
Signed-off-by: Dariusz Marcinkiewicz <darekm@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20190814104520.6001-2-darekm@google.com
Gerd Hoffmann [Thu, 22 Aug 2019 10:26:14 +0000 (12:26 +0200)]
drm/virtio: make resource id workaround runtime switchable.
Also update the comment with a reference to the virglrenderer fix.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190822102614.18164-1-kraxel@redhat.com
Christophe JAILLET [Thu, 22 Aug 2019 21:15:18 +0000 (23:15 +0200)]
drm/mcde: Fix an error handling path in 'mcde_probe()'
If we don't find any matching components, we should go through the error
handling path, in order to free some resources.
Fixes:
ca5be902a87d ("drm/mcde: Fix uninitialized variable")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190822211518.5578-1-christophe.jaillet@wanadoo.fr
Dan Carpenter [Wed, 21 Aug 2019 07:24:56 +0000 (10:24 +0300)]
drm/mipi-dbi: fix a loop in debugfs code
This code will likely crash if we try to do a zero byte write. The code
looks like this:
/* strip trailing whitespace */
for (i = count - 1; i > 0; i--)
if (isspace(buf[i]))
...
We're writing zero bytes so count = 0. You would think that "count - 1"
would be negative one, but because "i" is unsigned it is a large
positive numer instead. The "i > 0" condition is true and the "buf[i]"
access will be out of bounds.
The fix is to make "i" signed and now everything works as expected. The
upper bound of "count" is capped in __kernel_write() at MAX_RW_COUNT so
we don't have to worry about it being higher than INT_MAX.
Fixes:
02dd95fe3169 ("drm/tinydrm: Add MIPI DBI support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
[noralf: Adjust title]
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190821072456.GJ26957@mwanda