OSDN Git Service
Gavin Shan [Tue, 3 May 2016 05:41:36 +0000 (15:41 +1000)]
powerpc/powernv: Use PE instead of number during setup and release
In current implementation, the PEs that are allocated or picked
from the reserved list are identified by PE number. The PE instance
has to be picked according to the PE number eventually. We have
same issue when PE is released.
For pnv_ioda_pick_m64_pe() and pnv_ioda_alloc_pe(), this returns
PE instance so that pnv_ioda_setup_bus_PE() can use the allocated
or reserved PE instance directly. Also, pnv_ioda_setup_bus_PE()
returns the reserved/allocated PE instance to be used in subsequent
patches. On the other hand, pnv_ioda_free_pe() uses PE instance
(not number) as its argument. No logical changes introduced.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Gavin Shan [Thu, 5 May 2016 02:04:16 +0000 (12:04 +1000)]
powerpc/powernv/ioda1: Improve DMA32 segment track
In current implementation, the DMA32 segments required by one specific
PE isn't calculated with the information hold in the PE independently.
It conflicts with the PCI hotplug design: PE centralized, meaning the
PE's DMA32 segments should be calculated from the information hold in
the PE independently.
This introduces an array (@dma32_segmap) for every PHB to track the
DMA32 segmeng usage. Besides, this moves the logic calculating PE's
consumed DMA32 segments to pnv_pci_ioda1_setup_dma_pe() so that PE's
DMA32 segments are calculated/allocated from the information hold in
the PE (DMA32 weight). Also the logic is improved: we try to allocate
as much DMA32 segments as we can. It's acceptable that number of DMA32
segments less than the expected number are allocated.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Gavin Shan [Tue, 3 May 2016 05:41:34 +0000 (15:41 +1000)]
powerpc/powernv: Remove DMA32 PE list
PEs are put into PHB DMA32 list (phb->ioda.pe_dma_list) according
to their DMA32 weight. The PEs on the list are iterated to setup
their TCE32 tables at system booting time. The list is used for
once at boot time and no need to keep it.
This moves the logic calculating DMA32 weight of PHB and PE to
pnv_ioda_setup_dma() to drop PHB's DMA32 list. Also, every PE
traces the consumed DMA32 segment by @tce32_seg and @tce32_segcount
are useless and they're removed.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Gavin Shan [Tue, 3 May 2016 05:41:33 +0000 (15:41 +1000)]
powerpc/powernv/ioda1: Introduce PNV_IODA1_DMA32_SEGSIZE
Currently, there is one macro (TCE32_TABLE_SIZE) representing the
TCE table size for one DMA32 segment. The constant representing
the DMA32 segment size (1 << 28) is still used in the code.
This defines PNV_IODA1_DMA32_SEGSIZE representing one DMA32
segment size. the TCE table size can be calcualted when the page
has fixed 4KB size. So all the related calculation depends on one
macro (PNV_IODA1_DMA32_SEGSIZE). No logical changes introduced.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-By: Alistair Popple <alistair@popple.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Gavin Shan [Tue, 3 May 2016 05:41:32 +0000 (15:41 +1000)]
powerpc/powernv/ioda1: Rename pnv_pci_ioda_setup_dma_pe()
This renames pnv_pci_ioda_setup_dma_pe() to pnv_pci_ioda1_setup_dma_pe()
as it's the counter-part of IODA2's pnv_pci_ioda2_setup_dma_pe().
No logical changes introduced.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Gavin Shan [Thu, 5 May 2016 02:02:13 +0000 (12:02 +1000)]
powerpc/powernv/ioda1: M64 support on P7IOC
This enables M64 window on P7IOC, which has been enabled on PHB3.
Different from PHB3 where 16 M64 BARs are supported and each of
them can be owned by one particular PE# exclusively or divided
evenly to 256 segments, every P7IOC PHB has 16 M64 BARs and each
of them are divided to 8 segments. So every P7IOC PHB supports
128 M64 segments in total. P7IOC has M64DT, which helps mapping
one particular M64 segment# to arbitrary PE#. PHB3 doesn't have
M64DT, indicating that one M64 segment can only be pinned to the
fixed PE#.
In order to unified M64 support M64 on P7IOC and PHB3, we just
provide 128 M64 segments on every P7IOC PHB and each of them is
pinned to the fixed PE# by bypassing the function of M64DT. In
turn, we just need different phb->init_m64() for P7IOC and PHB3
and maps M64 segment in pnv_ioda_reserve_m64_pe() for P7IOC, most
of the code are shared by them.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Gavin Shan [Tue, 3 May 2016 05:41:30 +0000 (15:41 +1000)]
powerpc/powernv: Rename M64 related functions
This renames those functions picking PE number based on consumed
M64 segments, mapping M64 segments to PEs as those functions are
going to be shared by IODA1/IODA2 in next patch. No logical changes
introduced.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Gavin Shan [Tue, 3 May 2016 05:41:29 +0000 (15:41 +1000)]
powerpc/powernv: Track M64 segment consumption
When unplugging PCI devices, their parent PEs might be offline.
The consumed M64 resource by the PEs should be released at that
time. As we track M32 segment consumption, this introduces an
array to the PHB to track the mapping between M64 segment and
PE number.
Note: M64 mapping isn't covered by pnv_ioda_setup_pe_seg() as
IODA2 doesn't support the mapping explicitly while it's supported
on IODA1. Until now, no M64 is supported on IODA1 in software.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Gavin Shan [Tue, 3 May 2016 05:41:28 +0000 (15:41 +1000)]
powerpc/powernv: IO and M32 mapping based on PCI device resources
Currently, the IO and M32 segments are mapped to the corresponding
PE based on the windows of the parent bridge of PE's primary bus.
It's not going to work when the windows of root port or upstream
port of the PCIe switch behind root port are extended to PHB's
apertures in order to support hotplug in subsequent patch.
This fixes the issue by mapping IO and M32 segments based on the
resources of the PCI devices included in the PE, instead of the
windows of the parent bridge of the PE's primary bus.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Gavin Shan [Tue, 3 May 2016 05:41:27 +0000 (15:41 +1000)]
powerpc/powernv: Simplify pnv_ioda_setup_pe_seg()
pnv_ioda_setup_pe_seg() associates the IO and M32 segments with the
owner PE. The code mapping segments should be fixed and immune from
logic changes introduced to pnv_ioda_setup_pe_seg().
This moves the code mapping segments to helper pnv_ioda_setup_pe_res().
The data type for @rc is changed to "int64_t". Also, argument @hose is
removed from pnv_ioda_setup_pe() as it can be got from @pe. No functional
changes introduced.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-By: Alistair Popple <alistair@popple.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Gavin Shan [Tue, 3 May 2016 05:41:26 +0000 (15:41 +1000)]
powerpc/powernv: Fix initial IO and M32 segmap
There are two arrays for IO and M32 segment maps on every PHB.
The index of the arrays are segment number and the value stored
in the corresponding element is PE number, indicating the segment
is assigned to the PE. Initially, all elements in those two arrays
are zeroes, meaning all segments are assigned to PE#0. It's wrong.
This fixes the initial values in the elements of those two arrays
to IODA_INVALID_PE, meaning all segments aren't assigned to any
PE.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Gavin Shan [Tue, 3 May 2016 05:41:25 +0000 (15:41 +1000)]
powerpc/powernv: Data type unsigned int for PE number
This changes the data type of PE number from "int" to "unsigned int"
in order to match the fact PE number is never negative:
* The number of PE to which the specified PCI device is attached.
* The PE number map for SRIOV VFs.
* The returned PE number from pnv_ioda_alloc_pe().
* The returned PE number from pnv_ioda2_pick_m64_pe().
Suggested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-By: Alistair Popple <alistair@popple.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Gavin Shan [Tue, 3 May 2016 05:41:24 +0000 (15:41 +1000)]
powerpc/powernv: Rename PE# fields in struct pnv_phb
This renames the fields related to PE number in "struct pnv_phb"
for better reflecting of their usages as Alexey suggested. No
logical changes introduced.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Gavin Shan [Tue, 3 May 2016 05:41:23 +0000 (15:41 +1000)]
powerpc/powernv: Reorder fields in struct pnv_phb
This moves those fields in struct pnv_phb that are related to PE
allocation around. No logical change.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Gavin Shan [Tue, 3 May 2016 05:41:22 +0000 (15:41 +1000)]
powerpc/powernv: Drop phb->bdfn_to_pe()
The last usage of pnv_phb::bdfn_to_pe() was removed in
ff57b454ddb9 ("powerpc/eeh: Do probe on pci_dn"), so drop it.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Gavin Shan [Tue, 3 May 2016 05:41:21 +0000 (15:41 +1000)]
powerpc/powernv: Cleanup on pci_controller_ops instances
This cleans up on below data struct instances to use tab instead of
space indent of statement to avoid complains from scripts/checkpatch.pl.
No logical changes introduced.
@pnv_pci_ioda_controller_ops
@pnv_npu_ioda_controller_ops
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Gavin Shan [Tue, 3 May 2016 05:41:20 +0000 (15:41 +1000)]
powerpc/pci: Cleanup on struct pci_controller_ops
Each PHB has one instance of "struct pci_controller_ops" that includes
various callbacks called by PCI subsystem. In the definition of this
struct, some callbacks have explicit names for its arguments, but the
left don't have.
This adds all explicit names of the arguments to the callbacks in
"struct pci_controller_ops" so that the code looks consistent. Also,
argument name @dev is replaced by @pdev as the later one is the
preferred name for PCI device.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Rashmica Gupta [Wed, 23 Dec 2015 05:49:54 +0000 (16:49 +1100)]
selftests/powerpc: Add test to check if TM SPRs are corrupted
Testing that the TM SPRs are behaving the way they should. Uses more
threads than cpus to see if the following register values persist with
context switching:
- the FS (failure summary) flag in TEXASR
- TFIAR and TFHAR
Signed-off-by: Rashmica Gupta <rashmicy@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Rashmica Gupta [Wed, 23 Dec 2015 05:49:53 +0000 (16:49 +1100)]
selftests/powerpc: Add TM test to check if TAR is corrupted
If the transaction is aborted, the TAR should be rolled back to the
checkpointed value before the transaction began. The value written to the
TAR when the transaction is suspended should only remain there if the
transaction completes successfully.
Signed-off-by: Rashmica Gupta <rashmicy@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Rashmica Gupta [Wed, 23 Dec 2015 05:49:52 +0000 (16:49 +1100)]
selftests/powerpc: Add test for forking inside transaction
This test does a fork syscall inside a transaction. Basic sniff test to see
if we can enter the kernel during a transaction.
Signed-off-by: Rashmica Gupta <rashmicy@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Rashmica Gupta [Wed, 23 Dec 2015 05:49:51 +0000 (16:49 +1100)]
selftests/powerpc: Standardise TM calls
Currently tbegin, tend etc are written as opcodes or asm instructions. So
standardise these to asm instructions.
Signed-off-by: Rashmica Gupta <rashmicy@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Rashmica Gupta [Wed, 23 Dec 2015 05:49:50 +0000 (16:49 +1100)]
selftests/powerpc: Make reg.h common to all powerpc selftests
Currently there is a reg.h in pmu/ebb that has defines that are useful
in other powerpc selftests so move this up into selftests/powerpc
folder. Also include in utils.h - as this is often used in self tests.
Add in some other useful register defines.
Signed-off-by: Rashmica Gupta <rashmicy@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Mahesh Salgaonkar [Tue, 1 Mar 2016 05:47:46 +0000 (11:17 +0530)]
powerpc/powernv: Rename machine_check_pSeries_early() to powernv
The routine machine_check_pSeries_early() is only used on powernv, not
pseries. Hence rename machine_check_pSeries_early() to
machine_check_powernv_early().
Reported-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Christophe Lombard [Fri, 22 Apr 2016 13:39:22 +0000 (15:39 +0200)]
cxl: Check periodically the coherent platform function's state
In the PowerVM environment, the PHYP CoherentAccel component manages
the state of the Coherent Accelerator Processor Interface adapter and
virtualizes CAPI resources, handles CAPP, PSL, PSL Slice errors - and
interrupts - and provides a new set of hcalls for the OS APIs to utilize
Accelerator Function Unit (AFU).
During the course of operation, a coherent platform function can
encounter errors. Some possible reason for errors are:
• Hardware recoverable and unrecoverable errors
• Transient and over-threshold correctable errors
PHYP implements its own state model for the coherent platform function.
The state of the AFU is available through a hcall.
The current implementation of the cxl driver, for the PowerVM
environment, checks this state of the AFU only when an action is
requested - open a device, ioctl command, memory map, attach/detach a
process - from an external driver - cxlflash, libcxl. If an error is
detected the cxl driver handles the error according the content of the
Power Architecture Platform Requirements document.
But in case of low-level troubles (or error injection), the PHYP
component may reset the card and change the AFU state. The PHYP
interface doesn't provide any way to be notified when that happens thus
implies that the cxl driver:
• cannot handle immediatly the state change of the AFU.
• cannot notify other drivers (cxlflash, ...)
The purpose of this patch is to wake up the cpu periodically to check
the current state of each AFU and to see if we need to enter an error
recovery path.
Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Ian Munsie [Fri, 6 May 2016 07:46:36 +0000 (17:46 +1000)]
cxl: Add kernel API to allow a context to operate with relocate disabled
cxl devices typically access memory using an MMU in much the same way as
the CPU, and each context includes a state register much like the MSR in
the CPU. Like the CPU, the state register includes a bit to enable
relocation, which we currently always enable.
In some cases, it may be desirable to allow a device to access memory
using real addresses instead of effective addresses, so this adds a new
API, cxl_set_translation_mode, that can be used to disable relocation
on a given kernel context. This can allow for the creation of a special
privileged context that the device can use if it needs relocation
disabled, and can use regular contexts at times when it needs relocation
enabled.
This interface is only available to users of the kernel API for obvious
reasons, and will never be supported in a virtualised environment.
This will be used by the upcoming cxl support in the mlx5 driver.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Ian Munsie [Wed, 4 May 2016 04:52:58 +0000 (14:52 +1000)]
cxl: Ensure PSL interrupt is configured for contexts with no AFU IRQs
In the cxl kernel API, it is possible to create a context and start it
without allocating any interrupts. Since we assign or allocate the PSL
interrupt when allocating AFU interrupts this will lead to a situation
where we start the context with no means to take any faults.
The user API is not affected as it always goes through the cxl interrupt
allocation code paths and will have the PSL interrupt allocated or
assigned, even if no AFU interrupts were requested.
This checks that at least one interrupt is configured at the time of
attach, and if not it will assign the multiplexed PSL interrupt for
powernv, or allocate a single interrupt for PowerVM.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Ian Munsie [Wed, 4 May 2016 04:48:32 +0000 (14:48 +1000)]
cxl: Remove duplicate #defines
These defines are not used, but other equivalent definitions
(CXL_SPA_SW_CMD_*) are used. Remove the unused defines.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Ian Munsie [Wed, 4 May 2016 04:46:30 +0000 (14:46 +1000)]
cxl: Handle num_of_processes larger than can fit in the SPA
num_of_process is a 16 bit field, theoretically allowing an AFU to
support 16K processes, however the scheduled process area currently has
a maximum size of 1MB, which limits the maximum number of processes to
7704.
Some AFUs may not necessarily care what the limit is and just want to be
able to use the maximum by setting the field to 16K. To allow these to
work, detect this situation and use the maximum size for the SPA.
Downgrade the WARN_ON to a dev_warn.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Gavin Shan [Fri, 26 Feb 2016 00:26:26 +0000 (11:26 +1100)]
powerpc/mm: Improve readability of update_mmu_cache()
The function is used to update the MMU with software PTE. It can
be called by data access exception handler (0x300) or instruction
access exception handler (0x400). If the function is called by
0x400 handler, the local variable @access is set to _PAGE_EXEC
to indicate the software PTE should have that flag set. When the
function is called by 0x300 handler, @access is set to zero.
This improves the readability of the function by replacing if
statements with switch. No logical changes introduced.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Oliver O'Halloran [Thu, 5 May 2016 07:54:08 +0000 (17:54 +1000)]
powerpc/mm: define TOP_ZONE as a constant
The zone that contains the top of memory will be either ZONE_NORMAL
or ZONE_HIGHMEM depending on the kernel config. There are two functions
that require this information and both of them use an #ifdef to set
a local variable (top_zone). This is a little silly so lets just make it
a constant.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Cc: linux-mm@kvack.org
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Oliver O'Halloran [Tue, 16 Feb 2016 06:31:53 +0000 (17:31 +1100)]
powerpc/sstep: Fix emulation fall-through
There is a switch fallthough in instr_analyze() which can cause an
invalid instruction to be emulated as a different, valid, instruction.
The rld* (opcode 30) case extracts a sub-opcode from bits 3:1 of the
instruction word. However, the only valid values of this field are 001
and 000. These cases are correctly handled, but the others are not which
causes execution to fall through into case 31.
Breaking out of the switch causes the instruction to be marked as
unknown and allows the caller to deal with the invalid instruction in a
manner consistent with other invalid instructions.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Lennart Sorensen [Thu, 5 May 2016 20:44:44 +0000 (16:44 -0400)]
powerpc/sstep: Fix sstep.c compile on powerpcspe
Commit
be96f63375a1 ("powerpc: Split out instruction analysis part of
emulate_step()") introduced ldarx and stdcx into the instructions in
sstep.c, which are not accepted by the assembler on powerpcspe, but does
seem to be accepted by the normal powerpc assembler even in 32 bit mode.
Wrap these two instructions in a __powerpc64__ check like it is
everywhere else in the file.
Fixes:
be96f63375a1 ("powerpc: Split out instruction analysis part of emulate_step()")
Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Paul Mackerras [Wed, 13 Apr 2016 11:31:24 +0000 (21:31 +1000)]
powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs
xmon has commands for reading and writing SPRs, but they don't work
currently for several reasons. They attempt to synthesize a small
function containing an mfspr or mtspr instruction and call it. However,
the instructions are on the stack, which is usually not executable.
Also, for 64-bit we set up a procedure descriptor, which is fine for the
big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the
infrastructure for catching memory errors, but that only catches data
storage interrupts and machine check interrupts, but a failed
mfspr/mtspr can generate a program interrupt or a hypervisor emulation
assist interrupt, or be a no-op.
Instead of trying to synthesize a function on the fly, this adds two new
functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an
argument and read or write the SPR. Because there is no Power ISA
instruction which takes an SPR number in a register, we have to generate
one of each possible mfspr and mtspr instruction, for all 1024 possible
SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr()
and xmon_mtspr(). However, this 16kB of code pales in comparison to the
> 130kB of PPC opcode tables used by the xmon disassembler.
To catch interrupts caused by the mfspr/mtspr instructions, we add a new
'catch_spr_faults' flag. If an interrupt occurs while it is set, we come
back into xmon() via program_check_interrupt(), _exception() and die(),
see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back
into read_spr() or write_spr().
This adds a couple of other nice features: first, a "Sa" command that
attempts to read and print out the value of all 1024 SPRs. If any mfspr
instruction acts as a no-op, then the SPR is not implemented and not
printed.
Secondly, the Sr and Sw commands detect when an SPR is not
implemented (i.e. mfspr is a no-op) and print a message to that effect
rather than printing a bogus value.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Naveen N. Rao [Thu, 28 Apr 2016 09:31:10 +0000 (15:01 +0530)]
perf tools: Fix perf regs mask generation
On some architectures (powerpc in particular), the number of registers
exceeds what can be represented in an integer bitmask. Ensure we
generate the proper bitmask on such platforms.
Fixes:
71ad0f5e4 ("perf tools: Support for DWARF CFI unwinding on post processing")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Chandan Kumar [Thu, 28 Apr 2016 09:31:09 +0000 (15:01 +0530)]
perf/powerpc: Add support for unwinding perf-stackdump
Adds support for unwinding user stack dump by linking with libunwind.
Signed-off-by: Chandan Kumar <chandan.kumar@linux.vnet.ibm.com>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Chandan Kumar [Thu, 28 Apr 2016 09:31:08 +0000 (15:01 +0530)]
powerpc: Add HAVE_PERF_USER_STACK_DUMP support
With perf regs support enabled for powerpc, in commit
ed4a4ef85cf5
("powerpc/perf: Add support for sampling interrupt register state"),
the support for obtaining perf user stack dump is already enabled. This
patch declares the support for same and also updates documentation to
mark the support for perf-regs and perf-stackdump.
Signed-off-by: Chandan Kumar <chandan.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Fri, 6 May 2016 06:47:12 +0000 (16:47 +1000)]
powerpc/mm/hash64: Fix subpage protection with 4K HPTE config
With Linux page size of 64K and hardware only supporting 4K HPTE, if we
use subpage protection, we always fail for the subpage 0 as shown
below (using the selftest subpage_prot test):
520175565: (
4520111850): Failed at 0x3fffad4b0000 (p=13,sp=0,w=0), want=fault, got=pass !
4520890210: (
4520826495): Failed at 0x3fffad5b0000 (p=29,sp=0,w=0), want=fault, got=pass !
4521574251: (
4521510536): Failed at 0x3fffad6b0000 (p=45,sp=0,w=0), want=fault, got=pass !
4522258324: (
4522194609): Failed at 0x3fffad7b0000 (p=61,sp=0,w=0), want=fault, got=pass !
This is because hash preload wrongly inserts the HPTE entry for subpage
0 without looking at the subpage protection information.
Fix it by teaching should_hash_preload() not to preload if we have
subpage protection configured for that range.
It appears this has been broken since it was introduced in 2008.
Fixes:
fa28237cfcc5 ("[POWERPC] Provide a way to protect 4k subpages when using 64k pages")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[mpe: Rework into should_hash_preload() to avoid build fails w/SLICES=n]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Fri, 6 May 2016 06:46:00 +0000 (16:46 +1000)]
powerpc/mm/hash64: Factor out hash preload psize check
Currently we have a check in hash_preload() against the psize, which is
only included when CONFIG_PPC_MM_SLICES is enabled. We want to expand
this check in a subsequent patch, so factor it out to allow that. As a
bonus it removes the #ifdef in the C code.
Unfortunately we can't put this in the existing CONFIG_PPC_MM_SLICES
block because it would require a forward declaration.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Suraj Jitindar Singh [Thu, 28 Apr 2016 05:34:55 +0000 (15:34 +1000)]
powerpc: Update of_remove_property() call sites to remove null checking
After obtaining a property from of_find_property() and before calling
of_remove_property() most code checks to ensure that the property
returned from of_find_property() is not null. The previous patch moved
this check to the start of the function of_remove_property() in order to
avoid the case where this check isn't done and a null value is passed.
This ensures the check is always conducted before taking locks and
attempting to remove the property. Thus it is no longer necessary to
perform a check for null values before invoking of_remove_property().
Update of_remove_property() call sites in order to remove redundant
checking for null property value as check is now performed within the
of_remove_property function().
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
[mpe: Unbreak some lines which are just >80 chars for readability]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Suraj Jitindar Singh [Thu, 28 Apr 2016 05:34:54 +0000 (15:34 +1000)]
drivers/of: Add check for null property in of_remove_property()
The validity of the property input argument to of_remove_property() is
never checked within the function and thus it is possible to pass a null
value. It happens that this will be picked up in __of_remove_property()
as no matching property of the device node will be found and thus an
error will be returned, however once again there is no explicit check
for a null value. By the time this is detected 2 locks have already been
acquired which is completely unnecessary if the property to remove is
null.
Add an explicit check in the function of_remove_property() for a null
property value and return -ENODEV in this case, this is consistent with
what the previous return value would have been when the null value was
not detected and passed to __of_remove_property().
By moving an explicit check for the property paramenter into the
of_remove_property() function, this will remove the need to perform this
check in calling code before invocation of the of_remove_property()
function.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Suraj Jitindar Singh [Thu, 28 Apr 2016 05:53:45 +0000 (15:53 +1000)]
powerpc/pseries: Add null property check to pseries_discover_pic()
The return value of of_get_property() isn't checked before it is passed
to the strstr() function, if it happens that the return value is null
then this will result in a null pointer being dereferenced.
Add a check to see if the return value of of_get_property() is null and
if it is continue straight on to the next node.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: Chris Smart <chris@distroguy.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Alexey Kardashevskiy [Mon, 2 May 2016 07:06:12 +0000 (17:06 +1000)]
powerpc/powernv/pci: Fix cfg_dbg() & replace with pr_devel()
When cfg_dbg() is enabled (i.e. mapped to printk()), gcc produces
errors as the __func__ parameter is missing (pnv_pci_cfg_read() has one);
this adds the missing parameter.
cfg_dbg() is just an inferior version of pr_devel() so use the latter
instead.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Mon, 2 May 2016 04:54:29 +0000 (14:54 +1000)]
selftests/powerpc: Fix subpage_prot test to return !0 on failure
It's helpful for automated testing if the test returns error codes back
to the calling program.
While we're here fix all the usages of %p to remove the double 0x, ie.
%p already includes 0x.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Chris Smart [Mon, 2 May 2016 03:51:38 +0000 (13:51 +1000)]
selftests/powerpc: Test cp_abort during context switch
Test that performing a copy paste sequence in userspace on P9 does not
result in a leak of the copy into the paste of another process.
This is based on Anton Blanchard's context_switch benchmarking code. It
sets up two processes tied to the same CPU, one which copies and one
which pastes.
The paste should never succeed and the test fails if it does.
This is a test for commit, "
8a64904 powerpc: Add support for userspace
P9 copy paste."
Patch created with much assistance from Michael Neuling
<mikey@neuling.org>
Signed-off-by: Chris Smart <chris@distroguy.com>
Reviewed-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Chris Smart [Mon, 2 May 2016 06:00:58 +0000 (16:00 +1000)]
powerpc: Remove unnecessary CONFIG_SMP #ifdefs
The code in machine_restart/power_off/halt() includes #ifdefs around
calls to smp_send_stop(), however these are not required as
include/linux/smp.h includes an empty version of this function for
CONFIG_SMP=n builds.
Signed-off-by: Chris Smart <chris@distroguy.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Rashmica Gupta [Tue, 12 Apr 2016 05:33:58 +0000 (15:33 +1000)]
powerpc: Remove unused remnants from A2 cpu
Support for the A2 cpu was removed in commit
fb5a515704d7 ("powerpc:
Remove platforms/wsp and associated pieces"), and the externs:
__setup_cpu_a2 and __restore_cpu_a2 are still around and unused, so
remove them.
Signed-off-by: Rashmica Gupta <rashmicy@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Mon, 2 May 2016 12:56:07 +0000 (18:26 +0530)]
powerpc/mm/slice: Remove slice_mm_new_context()
The usage in mm mmu_context_nohash.c is bogus, because we set the
context.id value to MMU_NO_CONTEXT 4 lines previously in the same
function, meaning slice_mm_new_context() will always be true.
The book3s 64 usage was removed in the previous commit. So remove it as
unused.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Mon, 2 May 2016 10:51:50 +0000 (16:21 +0530)]
powerpc/mm/subpage: Initialise user psize correctly
As part of the radix support we switched Book3s64 to use a value of ~0
for MMU_NO_CONTEXT. That is because id 0 is special on radix.
However that broke the logic in init_new_context(). The code there needs
to differentiate between a newly allocated context and one inherited via
fork. Previously it worked because a newly allocated context has an id
of zero (because it was just memset() to zero), which used to match
MMU_NO_CONTEXT, and therefore slice_mm_new_context() did the right
thing.
Instead check against a context.id value of zero instead of using
slice_mm_new_context().
Without this patch we never call slice_set_user_psize(), and end up with
a slice psize value of zero and we always end up using 4K HPTE.
Fixes:
1a472c9dba6b ("powerpc/mm/radix: Add tlbflush routines")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Valentin Rothberg [Tue, 3 May 2016 06:59:27 +0000 (08:59 +0200)]
powerpc/mm/radix: Fix CONFIG_PPC_MMU_STD_64 typo
It's CONFIG_PPC_STD_MMU_64 not ...
CONFIG_PPC_MMU_STD_64.
Fixes:
11ffc1cfa4c2 ("powerpc/mm/radix: Use STD_MMU_64 to properly isolate hash related code")
Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:26:33 +0000 (23:26 +1000)]
powerpc/mm/radix: Document software bits for radix
Add #defines for Power ISA 3.0 software defined bits.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:26:32 +0000 (23:26 +1000)]
powerpc/mm/radix: Use firmware feature to enable Radix MMU
We use the existing "ibm,pa-features" device-tree property to enable
Radix MMU mode. This means we default to hash mode unless firmware tells
us it's OK to start using Radix mode.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:26:31 +0000 (23:26 +1000)]
powerpc/mm/radix: Add THP support for 4K linux page size
This adds THP support for 4K Linux page size config with radix. We still
don't do THP with 4K Linux page size and hash page table. Hash page
table needs a 16MB hugepage and we can't do THP with 16MM hugepage and
4K Linux page size.
We add missing functions to 4K hash config to get it to build and
hash__has_transparent_hugepage() makes sure we don't enable THP for 4K
hash config. To catch wrong usage of THP related with 4K config, we add
BUG() in those dummy functions we added to get it compile.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:26:30 +0000 (23:26 +1000)]
powerpc/mm/radix: Add radix THP callbacks
The deposited pgtable_t is a pte fragment hence we cannot use page->lru
for linking then together. We use the first two 64 bits for pte fragment
as list_head type to link all deposited fragments together. On withdraw
we properly zero then out.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:26:29 +0000 (23:26 +1000)]
powerpc/mm/thp: Abstraction for THP functions
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:26:28 +0000 (23:26 +1000)]
powerpc/mm: THP is only available on hash64 as of now
Only code movement in this patch. No functionality change.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:26:27 +0000 (23:26 +1000)]
powerpc/mm/radix: Add hugetlb support 4K page size
We have hugepage at the pmd level with 4K radix config. Hence we don't
need to use hugepd format with radix.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:26:26 +0000 (23:26 +1000)]
powerpc/mm/radix: Make sure swapper pgdir is properly aligned
With 4K page size radix config our level 1 page table size is 64K and it
should be naturally aligned.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:26:25 +0000 (23:26 +1000)]
powerpc/mm: Add radix support for hugetlb
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:26:24 +0000 (23:26 +1000)]
powerpc/mm: Fix vma_mmu_pagesize() for radix
Radix doesn't use the slice framework to find the page size. Hence use
vma to find the page size.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:26:23 +0000 (23:26 +1000)]
powerpc/mm: pte_frag abstraction
In this patch we make the number of pte fragments per level 4 page table
page a variable. Radix level 4 table size is 256 bytes and hence we can
have 256 fragments per level 4 page. We don't update the fragment count
in this patch. We need to do performance measurements to find the right
value for fragment count.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:26:22 +0000 (23:26 +1000)]
powerpc/radix: Update MMU cache
With radix there is no MMU cache. Hence we don't need to do anything in
update_mmu_cache().
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:26:21 +0000 (23:26 +1000)]
powerpc/mm: vmalloc abstraction in preparation for radix
The vmalloc range differs between hash and radix config. Hence make
VMALLOC_START and related constants a variable which will be runtime
initialized depending on whether hash or radix mode is active.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[mpe: Fix missing init of ioremap_bot in pgtable_64.c for ppc64e]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:26:20 +0000 (23:26 +1000)]
powerpc/mm: Update pte filter for radix
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:26:19 +0000 (23:26 +1000)]
powerpc/mm: Add radix pgalloc details
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:26:18 +0000 (23:26 +1000)]
powerpc/mm: Make 4K and 64K use pte_t for pgtable_t
This patch switches 4K Linux page size config to use pte_t * type
instead of struct page * for pgtable_t. This simplifies the code a lot
and helps in consolidating both 64K and 4K page allocator routines. The
changes should not have any impact, because we already store physical
address in the upper level page table tree and that implies we already
do struct page * to physical address conversion.
One change to note here is we move the pgtable_page_dtor() call for
nohash to pte_fragment_free_mm(). The nohash related change is due to
the related changes in pgtable_64.c.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:26:17 +0000 (23:26 +1000)]
powerpc/mm: Rename function to indicate we are allocating fragments
Only code cleanup. No functionality change.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:26:16 +0000 (23:26 +1000)]
powerpc/mm: Simplify the code dropping 4-level table #ifdef
Simplify the code by dropping 4-level page table #ifdef. We are always
4-level now.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:26:15 +0000 (23:26 +1000)]
powerpc/mm: Revert changes made to nohash pgalloc-64.h
This reverts pgalloc related changes WRT implementing 4-level page
table for 64K Linux page size and storing of physical address in higher
level page tables since they are only applicable to book3s64 variant
and we now have a separate copy for book3s64. This helps to keep these
headers simpler.
Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:26:14 +0000 (23:26 +1000)]
powerpc/mm: Copy pgalloc (part 2)
This moves the nohash variant of pgalloc headers to nohash/ directory
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:26:13 +0000 (23:26 +1000)]
powerpc/mm: Make a copy of pgalloc.h for 32 and 64 book3s
This patch start to make a book3s variant for pgalloc headers. We have
multiple book3s specific changes such as:
* 4 level page table
* store physical address in higher level table
* use pte_t * for pgtable_t
Having a book3s64 specific variant helps to keep code simpler and remove
lots of #ifdef around code.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:26:12 +0000 (23:26 +1000)]
powerpc/mm/radix: Update PTCR on secondary CPUs
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:26:11 +0000 (23:26 +1000)]
powerpc/mm/radix: Pick the address layout for radix config
Hash needs special get_unmapped_area() handling because of limitations
around base page size, so we have to set HAVE_ARCH_UNMAPPED_AREA.
With radix we don't have such restrictions, so we could use the generic
code. But because we've set HAVE_ARCH_UNMAPPED_AREA (for hash), we have
to re-implement the same logic as the generic code.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:26:10 +0000 (23:26 +1000)]
powerpc/mm/radix: Limit paca allocation in radix
On return from RTAS we access the paca variables and we have 64 bit
disabled. This requires us to limit paca in 32 bit range.
Fix this by setting ppc64_rma_size to first_memblock_size/1G range.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:26:09 +0000 (23:26 +1000)]
powerpc/mm/radix: Add checks in slice code to catch radix usage
Radix doesn't need slice support. Catch incorrect usage of slice code
when radix is enabled.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:26:08 +0000 (23:26 +1000)]
powerpc/mm/radix: Isolate hash table function from pseries guest code
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:26:07 +0000 (23:26 +1000)]
powerpc/mm/radix: Use STD_MMU_64 to properly isolate hash related code
We also use MMU_FTR_RADIX to branch out from code path specific to
hash.
No functionality change.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:26:06 +0000 (23:26 +1000)]
powerpc/mm/radix: Add MMU_FTR_RADIX
We are going to add asm changes in the follow up patches. Add the
feature bit now so that we can get it all build.
mpe: When CONFIG_PPC_RADIX_MMU=n we omit MMU_FTR_RADIX from the
MMU_FTRS_POSSIBLE mask. This allows the compiler to work out that those
checks will always be false and so the code can be elided completely.
Note we do *not* define MMU_FTR_RADIX to 0 in the RADIX_MMU=n case,
because that doesn't work with the ASM_FTR patching. In particular an
IF_SET section will result in a mask and value of zero, which is always
true, meaning the section *won't* be patched, which is the opposite of
what we want.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 11 May 2016 05:30:47 +0000 (15:30 +1000)]
powerpc/mm: Add mask of possible MMU features
Follow the example of the cpu feature code, and add a mask of possible
MMU features, MMU_FTRS_POSSIBLE.
This is used in mmu_has_feature(), which allows the possible mask to act
as a shortcut for any features that are not possible, but still allows
the feature bit itself to be defined.
We will use this in the next commit to allow MMU_FTR_RADIX checks to be
elided when MMU_FTR_RADIX is not possible.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:26:05 +0000 (23:26 +1000)]
powerpc/mm/radix: Add tlbflush routines
Core kernel doesn't track the page size of the VA range that we are
invalidating. Hence we end up flushing TLB for the entire mm here. Later
patches will improve this.
We also don't flush page walk cache separetly instead use RIC=2 when
flushing TLB, because we do a MMU gather flush after freeing page table.
MMU_NO_CONTEXT is updated for hash.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:26:04 +0000 (23:26 +1000)]
powerpc/mm: Hash abstraction for tlbflush routines
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:26:03 +0000 (23:26 +1000)]
powerpc/mm: Rename mmu_context_hash64.c to mmu_context_book3s64.c
This file now contains both hash and radix specific code. Rename it to
indicate this better.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:26:02 +0000 (23:26 +1000)]
powerpc/mm/radix: Add mmu context handling callback for radix
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:26:01 +0000 (23:26 +1000)]
powerpc/mm: Abstraction for switch_mmu_context()
How we switch MMU context differs between hash and radix. For hash we
need to switch the SLB details and for radix we need to switch the PID
SPR.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:26:00 +0000 (23:26 +1000)]
powerpc/mm/radix: Add radix callbacks for vmemmap and map_kernel page()
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:25:59 +0000 (23:25 +1000)]
powerpc/mm: Abstraction for vmemmap and map_kernel_page()
For hash we create vmemmap mapping using bolted hash page table entries.
For radix we fill the radix page table. The next patch will add the
radix details for creating vmemmap mappings.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:25:58 +0000 (23:25 +1000)]
powerpc/mm/radix: Add radix callbacks for early init routines
This adds routines for early setup for radix. We use device tree
property "ibm,processor-radix-AP-encodings" to find supported page
sizes. If we don't find the above we consider 64K and 4K as supported
page sizes.
We do map vmemap using 2M page size if we can. The linear mapping is
done such that we use required page size for that range. For example
memory of 3.5G is mapped such that we use 1G mapping till 3G range and
use 2M mapping for the rest.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:25:57 +0000 (23:25 +1000)]
powerpc/mm: Abstract early MMU init in preparation for radix
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:25:56 +0000 (23:25 +1000)]
powerpc/mm/radix: Add radix callback for pmd accessors
This only does 64K Linux page support for now. 64K hash Linux config
THP needs to differentiate it from hugetlb huge page because with THP we
need to track hash pte slot information with respect to each subpage.
This is not needed with hugetlb hugepage, because we don't do MPSS with
hugetlb.
Radix doesn't have any such restrictions.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:25:55 +0000 (23:25 +1000)]
powerpc/mm: Move hugetlb and THP related pmd accessors to pgtable.h
Here we create pgtable-64/4k.h and move pmd accessors that are common
between hash and radix there. We can't do much sharing with 4K Linux
page size because 4K Linux page size with hash config doesn't support
THP. So for now it is empty. In later patches we will add functions that
does conditional hash/radix accessors there.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:25:54 +0000 (23:25 +1000)]
powerpc/mm: Add radix callbacks to pte accessors
For those pte accessors, that operate on a different set of pte bits
between hash/radix, we add a generic variant that does a conditional
to hash linux or radix variant.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:25:53 +0000 (23:25 +1000)]
powerpc/mm/radix: Add dummy radix_enabled()
In this patch we add the radix Kconfig and conditional check.
radix_enabled() is written to always return 0 here. Once we have all
needed radix changes added, we will update this to an mmu_feature check.
We need to add this early so that we can get it all build in the early
stage.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:25:52 +0000 (23:25 +1000)]
powerpc/mm/radix: Add radix pte #defines
This adds Power ISA 3.0 specific pte defines. We share most of the
details with hash Linux page table format. This patch indicates only
things where we differ.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:25:51 +0000 (23:25 +1000)]
powerpc/mm: Move pte related functions together
Only code movement. No functionality change.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:25:50 +0000 (23:25 +1000)]
powerpc/mm: Move page table index and and vaddr to pgtable.h
Now that the page table size is a variable, we can move these to
generic pgtable.h.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:25:49 +0000 (23:25 +1000)]
powerpc/mm: Make page table size a variable
Radix and hash MMU models support different page table sizes. Make
the #defines a variable so that existing code can work with variable
sizes.
Slice related code is only used by hash, so use hash constants there. We
will replicate some of the boundary conditions with resepct to TASK_SIZE
using radix values too. Right now we do boundary condition check using
hash constants.
Swapper pgdir size is initialized in asm code. We select the max pgd
size to keep it simple. For now we select hash pgdir. When adding radix
we will switch that to radix pgdir which is 64K.
BUILD_BUG_ON check which is removed is already done in hugepage_init()
using MAYBE_BUILD_BUG_ON().
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:25:48 +0000 (23:25 +1000)]
powerpc/mm: Move pte accessors that operate on common pte bits to pgtable.h
These pte functions will remain the same between radix and hash. Move
them to pgtable.h.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:25:47 +0000 (23:25 +1000)]
powerpc/mm: Move common pte bits and accessors to book3s/64/pgtable.h
Now that we have moved book3s hash64 Linux pte bits to match Power ISA
3.0 radix pte bit positions, we move the matching pte bits to a common
header.
Only code movement in this patch. No functionality change.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:25:46 +0000 (23:25 +1000)]
powerpc/mm: Handle _PTE_NONE_MASK
I am splitting this as a separate patch to get better review. If ok
we should merge this with previous patch.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:25:45 +0000 (23:25 +1000)]
powerpc/mm/book3s: Rename hash specific PTE bits to carry H_ prefix
This helps to make following hash only pte bits easier.
We have kept _PAGE_CHG_MASK, _HPAGE_CHG_MASK and _PAGE_PROT_BITS as it
is in this patch eventhough they use hash specific bits. Using them in
radix as it is should be ok, because with radix we expect those bit
positions to be zero.
Only renames in this patch, no change in functionality.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Fri, 29 Apr 2016 13:25:44 +0000 (23:25 +1000)]
powerpc/mm: Move hash and no hash code to separate files
This patch reduces the number of #ifdefs in C code and will also help in
adding radix changes later. Only code movement in this patch.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[mpe: Propagate copyrights and update GPL text]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>