OSDN Git Service
Wei Yongjun [Sat, 29 Oct 2016 16:17:55 +0000 (16:17 +0000)]
s5p-cec: remove unused including <linux/version.h>
Remove including <linux/version.h> that don't need it.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ted Chen [Sun, 30 Oct 2016 15:29:20 +0000 (23:29 +0800)]
staging: comedi: ni_tio: fix warnings of uninitialized variables
Fix the following warnings by initializing these variables
to zero and add error check to return early when the check
returns an error.
drivers/staging/comedi/drivers/ni_tio.c: In function ‘ni_tio_set_sync_mode’:
drivers/staging/comedi/drivers/ni_tio.c:492:28: warning: ‘ps’ may be used uninitialized in this function [-Wuninitialized]
drivers/staging/comedi/drivers/ni_tio.c: In function ‘ni_tio_insn_config’:
drivers/staging/comedi/drivers/ni_tio.c:820:2: warning: ‘temp64’ may be used uninitialized in this function [-Wuninitialized]
drivers/staging/comedi/drivers/ni_tio.c:811:6: note: ‘temp64’ was declared her
Signed-off-by: Ted Chen <tedc.37zngo@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Mon, 7 Nov 2016 10:18:42 +0000 (11:18 +0100)]
staging: vc04_services: fix up some printk warnings
Some more printk warnings snuck in recently, no one seems to be building
this on 64bit machines...
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Lee Jones <lee@kernel.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Michael Zoran <mzoran@crowfest.net>
Cc: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Wahren [Mon, 31 Oct 2016 14:39:33 +0000 (14:39 +0000)]
staging: vchiq_arm: change order during module probe
The current order during module probe is prone to race conditions:
* debugfs entries, sysfs entries, platform code
So fix this by swapping the steps debugfs entries and platform code.
As a benefit this saves us a clean up step in the error path.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Wahren [Mon, 31 Oct 2016 14:39:32 +0000 (14:39 +0000)]
staging: vchiq_arm: remove debugfs entries on module unload
This removes the debugfs entries on module unload and fix one
of the many kernel oops after loading the module again.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Wahren [Mon, 31 Oct 2016 14:39:31 +0000 (14:39 +0000)]
staging: vchiq_arm: handle error case of get_user_pages
It's possible that get_user_pages() could fail. So evaluate its
return code and handle this error case properly.
This issue has been found by Cppcheck.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Wahren [Mon, 31 Oct 2016 14:39:30 +0000 (14:39 +0000)]
staging: vchiq_arm: remove hardcoded buffer length
We better use sizeof instead of hardcoding buffer length multiple
times. This make it easier to increase the buffer in the future.
In order to keep below 80 chars limit make the variable name shorter.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Wahren [Mon, 31 Oct 2016 14:39:29 +0000 (14:39 +0000)]
staging: vchiq_arm: add missing of_node_put
After device_node usage the refcount must be decremented with
of_node_put().
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Wahren [Mon, 31 Oct 2016 14:39:28 +0000 (14:39 +0000)]
staging: vchiq_core: fix format strings in vchiq_dump_service_state
The member localport and remoteport are unsigned. So fix the format
string accordingly.
The issue has been found by Cppcheck.
Signed-off-by: Stefam Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Wahren [Mon, 31 Oct 2016 14:39:27 +0000 (14:39 +0000)]
staging: vchiq_core: fix service dereference in unlock_service
The service state is dereferenced before BUG_ON and outside of the
spin lock. So in order to avoid possible NULL pointer dereferences or
races move the whole scope at a safer place.
This issue has been found by Cppcheck.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Zoran [Tue, 1 Nov 2016 15:21:14 +0000 (08:21 -0700)]
staging: vc04_services: parse_rx_slots() - Fix compiler warning
vc04_services contains a debug logging mechanism. The log is
maintained in a shared memory area between the kernel and the
firmware. Changing the sizes of the data in this area would
require a firmware change which is distributed independently
from the kernel binary.
One of the items logged is the address of received messages.
This address is a pointer, but the debugging slot used to store
the information is a 32 bit integer.
Luckily, this value is never interpreted by anything other
then debug tools and it is expected that a human debugging
the kernel interpret it.
This change adds a cast to long before the original cast
to int to silence the warning.
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Zoran [Sun, 30 Oct 2016 12:55:07 +0000 (05:55 -0700)]
staging: vc04_services: remove vchiq_copy_from_user
The vchiq_copy_from_user function is not portable
and is consider "bad practice." Replace this function
with a callback based mechanism that is passed downward
on the stack. When it is actually time to copy the data,
the callback is called to copy the data into the message.
This callback is provided internally for userland calls
through ioctls on the device.
NOTE: Internal clients will need to be modified to work
with the new internal API.
Test Run:
vchiq_test -p 1
vchiq_test -f 10
Both tests pass.
Internal API Changes:
Change vchi_msg_queue to:
int32_t
vchi_msg_queue(VCHI_SERVICE_HANDLE_T handle,
ssize_t (*copy_callback)(void *context, void *dest,
size_t offset, size_t maxsize),
void *context,
uint32_t data_size );
Remove:
vchi_msg_queuev_ex
vchi_msg_queuev
These functions were not implemented anyway so no need to fix them. It's
easier to just remove them.
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Zoran [Mon, 31 Oct 2016 21:02:03 +0000 (14:02 -0700)]
staging: vc04_services: setup DMA and coherent mask
VCHI messages between the CPU and firmware use 32-bit
bus addresses. Explicitly set the DMA mask and coherent
on all platforms.
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Zoran [Fri, 28 Oct 2016 17:58:13 +0000 (10:58 -0700)]
staging: vc04_services: call sg_init_table to init scatterlist
Call the sg_init_table function to correctly initialze
the DMA scatterlist. This function is required to completely
initialize the list and is mandatory if DMA debugging is
enabled in the build configuration.
One of the purposes of sg_init_table is to set
the magic "cookie" on each list element and ensure
the chain end is marked.
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anton Leshchenko [Tue, 1 Nov 2016 22:27:11 +0000 (01:27 +0300)]
Staging: vme: Fix parenthesis alignment.
Align broken line for code readability.
Signed-off-by: Anton Leshchenko <antonl1911@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anton Leshchenko [Tue, 1 Nov 2016 22:27:10 +0000 (01:27 +0300)]
Staging: vme: Add required identifier names.
Add identifier names for function definition arguments.
Signed-off-by: Anton Leshchenko <antonl1911@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anton Leshchenko [Tue, 1 Nov 2016 22:27:09 +0000 (01:27 +0300)]
Staging: vme: Use BIT macro for bit field definitions.
Instead of using shift operation use BIT macro for bit field
definitions.
Signed-off-by: Anton Leshchenko <antonl1911@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anton Leshchenko [Tue, 1 Nov 2016 22:27:08 +0000 (01:27 +0300)]
Staging: vme: Remove excessive blank lines.
To make code more readable, remove excessive blank lines.
Signed-off-by: Anton Leshchenko <antonl1911@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Binder [Thu, 3 Nov 2016 15:44:29 +0000 (11:44 -0400)]
staging: unisys: visorinput: Add default conditions to case statements
This commit adds a default condition to those case statements that do not
already have one. This is done to provide both a logical covering of all
conditions, as well as to maintain uniformity with the rest of the Unisys
driver set.
Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Binder [Thu, 3 Nov 2016 15:44:28 +0000 (11:44 -0400)]
staging: unisys: visorbus: Adjust formatting of variable assignment
Adjusts the formatting of a variable assignment to use fewer line breaks,
making it follow the convention used elsewhere in the s-Par driver set.
Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Kershner [Thu, 3 Nov 2016 15:44:27 +0000 (11:44 -0400)]
staging: unisys: visorbus: in my_device_destroy don't call device_epilog
The function my_device_destroy should call chipset_device_destroy
directly instead of calling device_epilog. Since this was the last
function to use device_epilog that function was removed as well.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Kershner [Thu, 3 Nov 2016 15:44:26 +0000 (11:44 -0400)]
staging: unisys: visorbus: my_device_changestate: no longer call device_epilog
Function my_device_changestate should call chipset_device_changestate
directly instead of calling device_epilog.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Kershner [Thu, 3 Nov 2016 15:44:25 +0000 (11:44 -0400)]
staging: unisys: visorbus: my_device_changestate: add error response
The function my_device_changestate was not sending a response if there
was an error with the CONTROLVM message.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Kershner [Thu, 3 Nov 2016 15:44:24 +0000 (11:44 -0400)]
staging: unisys: visorbus: my_device_create does not call device_epilog
Don't have my_device_create call device_epilog, have it call
chipset_device_create directly instead.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Kershner [Thu, 3 Nov 2016 15:44:23 +0000 (11:44 -0400)]
staging: unisys: visorbus: remove bus_epilog
Remove the function bus_epilog since no one is calling it.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Kershner [Thu, 3 Nov 2016 15:44:22 +0000 (11:44 -0400)]
staging: unisys: visorbus: bus_create fix error handling
Add error handling to bus_create function.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Kershner [Thu, 3 Nov 2016 15:44:21 +0000 (11:44 -0400)]
staging: unisys: visorbus: bus_destroy add error handling
Do proper error handling and return error codes instead of just ignoring
them.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Kershner [Thu, 3 Nov 2016 15:44:20 +0000 (11:44 -0400)]
staging: unisys: visorbus: bus_destroy do not call bus_epilog
Have bus_destroy call chipset_bus_destroy directly instead of going
through bus_epilog.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Kershner [Thu, 3 Nov 2016 15:44:19 +0000 (11:44 -0400)]
staging: unisys: visorbus: bus_create no longer calls bus_epilog
Have bus_create call chipset_bus_create directly instead of going
through the function bus_epilog.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Kershner [Thu, 3 Nov 2016 15:44:18 +0000 (11:44 -0400)]
staging: unisys: visorbus: fix double response
This patch addresses the problem that we were sending double responses
back to the s-Par Firmware when processing CONTROLVM Messages. Every
message responds individually and the epilog functions would send a
response as well.
Since a message could delay the response, it was decided to remove the
extra response from the epilog function.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sameer Wadgaonkar [Thu, 3 Nov 2016 15:44:17 +0000 (11:44 -0400)]
staging: unisys: visorbus: remove unused initializations
Removed intializations from visorchipset_open(), visorchipset_init()
and moved the memset in initialize_controlvm_payload_info() down in
case of early returns from the function.
Signed-off-by: Sameer Wadgaonkar <sameer.wadgaonkar@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tim Sell [Thu, 3 Nov 2016 15:44:16 +0000 (11:44 -0400)]
staging: unisys: visorbus: convert client_bus_info sysfs to debugfs
Previously, the sysfs entry (assuming traditional sysfs mountpoint):
/sys/bus/visorbus/devices/visorbus<n>/client_bus_info
violated kernel conventions by printing more than one item. This along
with the fact that the data emitted was diagnostic data (intended to
shadow the client driver info provided via s-Par livedumps) made it a
logical candidate for debugfs. So this patch moves this sysfs entry to
debugfs as (assuming traditional debugfs mountpoint):
/sys/kernel/debug/visorbus/visorbus<n>/client_bus_info
Data for this debugfs is emitted using the preferred seq_file interface,
which allowed a vastly-simplified version of vbuschannel_print_devinfo()
to format the individual output components.
Functionality was verified as follows:
[root@sparguest visorbus]# mount | grep debug
debugfs on /sys/kernel/debug type debugfs (rw)
[root@sparguest visorbus]# pwd
/sys/kernel/debug/visorbus
[root@sparguest visorbus]# l visorbus1/
total 0
drwxr-xr-x 2 root root 0 Sep 28 16:36 .
drwxr-xr-x 4 root root 0 Sep 28 16:36 ..
-r--r----- 1 root root 0 Sep 28 16:36 client_bus_info
[root@sparguest visorbus]# l visorbus2
total 0
drwxr-xr-x 2 root root 0 Sep 28 16:36 .
drwxr-xr-x 4 root root 0 Sep 28 16:36 ..
-r--r----- 1 root root 0 Sep 28 16:36 client_bus_info
[root@sparguest visorbus]# cat visorbus1/client_bus_info
Client device / client driver info for s-Par Console partition (vbus #1):
chipset visorchipset kernel ver. 4.8.0-rc6-ARCH+
clientbus visorbus kernel ver. 4.8.0-rc6-ARCH+
[2]keyboard visorinput kernel ver. 4.8.0-rc6-ARCH+
[3]mouse visorinput kernel ver. 4.8.0-rc6-ARCH+
[root@sparguest visorbus]# cat visorbus2/client_bus_info
Client device / client driver info for s-Par IOVM partition (vbus #2):
chipset visorchipset kernel ver. 4.8.0-rc6-ARCH+
clientbus visorbus kernel ver. 4.8.0-rc6-ARCH+
[0]ultravnic visornic kernel ver. 4.8.0-rc6-ARCH+
[1]ultravnic visornic kernel ver. 4.8.0-rc6-ARCH+
[2]sparvhba visorhba kernel ver. 4.8.0-rc6-ARCH+
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tim Sell [Thu, 3 Nov 2016 15:44:15 +0000 (11:44 -0400)]
staging: unisys: visorbus: move DEVICE_ATTR_RO defs as-per conventions
The kernel convention is for DEVICE_ATTR_RO(<attr>) definitions to occur
immediately after the functions that implement the attribute behaviors.
DEVICE_ATTR_RO definitions in visorbus_main.c have been moved to comply
with this convention.
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shiva Kerdel [Sun, 6 Nov 2016 14:09:18 +0000 (15:09 +0100)]
Staging: speakup: Remove unnecessary space after cast
The affected files have been modified to remove redundant spaces after
casts to solve checkpatch.pl checks.
Signed-off-by: Shiva Kerdel <shiva@exdev.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Mon, 7 Nov 2016 08:14:03 +0000 (09:14 +0100)]
Merge tag 'iio-for-4.10b' of git://git./linux/kernel/git/jic23/iio into staging-testing
Jonathan writes:
Second round of new device support, cleanups and fixes for IIO in the 4.10 cycle
This includes two branch merges for elements that may also go via MFD.
New device support
* cros_ec
- new driver to support these Chrome OS contiguous sensors which are behind
the Chrome OS embedded controller. Requires a few minor MFD and chrome
platform changes. One follow up fix deals with some dependency issues in
Kconfig.
* mpu-3050
- new driver and device tree bindings for this venerable device.
* st_accel
- support for the lng2dm an
Driver features
* ad7192
- Add DVdd regulator handling
* ad9832
- Add DVDD regulator handling
* at91
- Suspend and resume support
* si7020
- Device tree bindings
* ti-am335x
- DMA support - uses dma to accelerate short bursts of read back rather
than full blown DMA buffer support. Greatly improved performance.
Includes an MFD addition to give access to the address needed for DMA.
* tsl2583
- Device tree bindings
Cleanups and minor fixes
* ad7192
- Fix regulator naming to match datasheet
- Handle regulator errors correctly (so as to not break deferred probing)
- Rename reg variable to reflect which regulator it is
* ad5933
- Fix regulator naming to match datasheet
- Handle regulator errors correctly (so as to not break deferred probing)
* ad7746
- Fix a missing return value (fallout from previous patch set)
* ad7780
- Fix regulator naming to match datasheet
- Handle regulator errors correctly (so as to not break deferred probing)
* ad9832
- Fix regulator naming to match datasheet
- Handle regulator errors correctly (so as to not break deferred probing)
- Rename reg regulator to reflect which one it is
* ad9834
- Fix regulator naming to match datasheet
- Handle regulator errors correctly (so as to not break deferred probing)
* hts221
- Remove a duplicated include
* maxim thermocouple
- Handle a wrong storage side in read function. Prevent any problems that
might be introduced by additions to this driver in future.
* tsl2583 - big set from Brian Masney to drive this towards a staging
graduation.
- Convert to iio_chan_spec and read_raw / write_raw (in a couple of steps)
- Improved error handling in various functions
- Drop redundant power_state custom sysfs attribute.
- Use IIO_*_ATTR* macros for remaining attributes.
- Return an error code to userspace on invalid parameters being writen to
sysfs files.
- Add locking to various attribute accesses to remove possible races.
- Add defines for various magic numbers.
- Use smbus_read_byte_data instead of a write_byte followed by read_byte.
- Query only relevant registers in probe.
- Tidy up ordering of code comments.
- Remove a pointless power off sequence in taos_chip_on.
- Don't bother shutting down the chip when updating the lux table.
The table is held entirely in the driver and doesn't effect the chip at all.
- Drop a redundant i2c call in taos_als_calibrate where the same register
is read twice in a row.
Brian Masney [Thu, 3 Nov 2016 12:56:17 +0000 (08:56 -0400)]
staging: iio: tsl2583: remove redudant i2c call in taos_als_calibrate()
taos_als_calibrate() queries the control register to determine if the
unit is powered on and has the ADC enabled. It then queries the same
register a second time to determine if the ADC reading is valid. This
patch removes the redundant i2c_smbus_read_byte_data() call.
Verified that the driver still functions correctly using a TSL2581
hooked up to a Raspberry Pi 2.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Brian Masney [Thu, 3 Nov 2016 12:56:16 +0000 (08:56 -0400)]
staging: iio: tsl2583: don't shutdown chip when updating the lux table
in_illuminance_lux_table_store() shuts down the chip, updates the
contents of the lux table, and then turns the chip back on. The values
in lux table are not used by the chip and are only used internally by
the driver. It is not necessary to change the power state on the chip.
This patch removes the calls to taos_chip_off() and taos_chip_on()
in in_illuminance_lux_table_store().
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Brian Masney [Thu, 3 Nov 2016 12:56:15 +0000 (08:56 -0400)]
staging: iio: tsl2583: remove redundant power off sequence in taos_chip_on()
taos_chip_on() explicitly turns the sensor power on and then writes the
8 registers that are stored in taos_config. The first register in
taos_config is the CONTROL register and the configuration is set to
turn the power off. The existing state sequence in taos_chip_on() is:
- Turn device power on
- Turn device power off (via taos_config)
- Configure other 7 registers (via taos_config)
- Turn device power on, enable ADC
This patch changes the code so that the device is not powered off via
taos_config.
Verified that the driver still functions correctly using a TSL2581
hooked up to a Raspberry Pi 2.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Brian Masney [Thu, 3 Nov 2016 12:56:14 +0000 (08:56 -0400)]
staging: iio: tsl2583: fixed ordering of comments
in taos_defaults()
The comments in taos_defaults() appear after the line of code
that they apply to. This patch moves the comments so that they appear
before the code. Some of the comments were updated to be more
informative.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Brian Masney [Thu, 3 Nov 2016 12:56:13 +0000 (08:56 -0400)]
staging: iio: tsl2583: removed unused code from device probing
taos_probe() queries the all of the sensor's registers and loads all of
the values into a buffer stored on the stack. Only the chip ID register
was actually used. Change the probe function to just query the chip ID
register on the device.
Verified that the driver still functions correctly using a TSL2581
hooked up to a Raspberry Pi 2.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Brian Masney [Thu, 3 Nov 2016 12:56:12 +0000 (08:56 -0400)]
staging: iio: tsl2583: i2c_smbus_write_byte() / i2c_smbus_read_byte() migration
There were several places where the driver would first call
i2c_smbus_write_byte() to select the register on the device, and then
call i2c_smbus_read_byte() to get the contents of that register. The
code would look roughly like:
/* Select register */
i2c_smbus_write_byte(client, REGISTER);
/* Read the the last register that was written to */
int data = i2c_smbus_read_byte(client);
Rewrite this to use i2c_smbus_read_byte_data() to combine the two
calls into one:
int data = i2c_smbus_read_byte_data(chip->client, REGISTER);
Verified that the driver still functions correctly using a TSL2581
hooked up to a Raspberry Pi 2.
This fixes the following warnings that were found by the
kbuild test robot that were introduced by commit
8ba355cce3c6 ("staging:
iio: tsl2583: check for error code from i2c_smbus_read_byte()").
drivers/staging/iio/light/tsl2583.c:365:5-12: WARNING: Unsigned
expression compared with zero: reg_val < 0
drivers/staging/iio/light/tsl2583.c:388:5-12: WARNING: Unsigned
expression compared with zero: reg_val < 0
This also removes the need for the taos_i2c_read() function since all
callers were only calling the function with a length of 1.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Jonathan Cameron [Sat, 5 Nov 2016 17:38:00 +0000 (17:38 +0000)]
Merge branch 'ib-iio-mfd-ti335x_dma' into togreg
A local branch created as Lee requested these two patches were applied
in a fashion that would later let him merge the same branch into MFD
if needed.
Mugunthan V N [Wed, 5 Oct 2016 09:04:41 +0000 (14:34 +0530)]
drivers: iio: ti_am335x_adc: add dma support
This patch adds the required pieces to ti_am335x_adc driver for
DMA support
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Mugunthan V N [Wed, 5 Oct 2016 09:04:40 +0000 (14:34 +0530)]
mfd: ti_am335x_tscadc: store physical address
store the physical address of the device in its priv to use it
for DMA addressing in the client drivers.
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Wenyou Yang [Wed, 2 Nov 2016 09:21:48 +0000 (17:21 +0800)]
iio: adc: at91: add suspend and resume callback
Add suspend/resume callback, support the pinctrl sleep state when
the system suspend as well.
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Song Hongyan [Thu, 3 Nov 2016 00:45:48 +0000 (00:45 +0000)]
iio: hid-sensor-attributes: Check sample_frequency/hysteresis write data legitimacy
Neither sample frequency value nor hysteresis value can be set to be a
negative number, check and return "Invalid argument" if they are negative.
If not do this change, sample_frequency will be set into some unknown
value, read hysteresis value after write negative number will return
"Invalid argument".
Signed-off-by: Song Hongyan <hongyan.song@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Eva Rachel Retuya [Mon, 31 Oct 2016 17:04:35 +0000 (01:04 +0800)]
staging: iio: ad9832: clean-up regulator 'reg'
Rename regulator 'reg' to 'avdd' so as to be clear what regulator it
stands for specifically. Additionally, get rid of local variable 'reg'
and use direct assignment instead. Update also the goto label pertaining
to the avdd regulator during disable.
Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Eva Rachel Retuya [Mon, 31 Oct 2016 17:04:34 +0000 (01:04 +0800)]
staging: iio: ad9832: add DVDD regulator
The AD9832/AD9835 is supplied with two power sources: AVDD as analog
supply voltage and DVDD as digital supply voltage.
Attempt to fetch and enable the regulator 'dvdd'. Bail out if any error
occurs.
Suggested-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Eva Rachel Retuya [Mon, 31 Oct 2016 17:04:33 +0000 (01:04 +0800)]
staging: iio: ad7192: rename regulator 'reg' to 'avdd'
Rename regulator 'reg' to 'avdd' so as to be clear what regulator it
stands for specifically. Also, update the goto label accordingly.
Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Eva Rachel Retuya [Mon, 31 Oct 2016 17:04:32 +0000 (01:04 +0800)]
staging: iio: ad7192: add DVdd regulator
The AD7190/AD7192/AD7193/AD7195 is supplied with two power sources:
AVdd as analog supply voltage and DVdd as digital supply voltage.
Attempt to fetch and enable the regulator 'dvdd'. Bail out if any error
occurs.
Suggested-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Eva Rachel Retuya [Mon, 31 Oct 2016 17:04:31 +0000 (01:04 +0800)]
staging: iio: rework regulator handling
Currently, the affected drivers ignore all errors from regulator_get().
The way it is now, it also breaks probe deferral (EPROBE_DEFER). The
correct behavior is to propagate the error to the upper layers so they
can handle it accordingly.
Rework the regulator handling so that it matches the standard behavior.
If the specific design uses a static always-on regulator and does not
explicitly specify it, regulator_get() will return the dummy regulator.
The following semantic patch was used to apply the change:
@r1@
expression reg, dev, en, volt;
@@
reg = \(devm_regulator_get\|regulator_get\)(dev, ...);
if (
- !
IS_ERR(reg))
+ return PTR_ERR(reg);
(
- { en = regulator_enable(reg);
- if (en) return en; }
+
+ en = regulator_enable(reg);
+ if (en) {
+ dev_err(dev, "Failed to enable specified supply\n");
+ return en; }
|
+
- { en = regulator_enable(reg);
- if (en) return en;
- volt = regulator_get_voltage(reg); }
+ en = regulator_enable(reg);
+ if (en) {
+ dev_err(dev, "Failed to enable specified supply\n");
+ return en;
+ }
+ volt = regulator_get_voltage(reg);
)
@r2@
expression arg;
@@
- if (!IS_ERR(arg)) regulator_disable(arg);
+ regulator_disable(arg);
Hand-edit the debugging prints with the supply name to become more
specific.
Suggested-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Eva Rachel Retuya [Mon, 31 Oct 2016 17:04:30 +0000 (01:04 +0800)]
staging: iio: set proper supply name to devm_regulator_get()
The name passed to devm_regulator_get() should match the name of the
supply as specified in the device datasheet. This makes it clear what
power supply is being referred to in case of presence of other
regulators.
Currently, the supply name specified on the affected devices is 'vcc'.
Use lowercase version of the datasheet name to specify the supply
voltage.
Suggested-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Jonathan Cameron [Tue, 1 Nov 2016 18:53:11 +0000 (18:53 +0000)]
Merge branch 'ib-iio-mfd-4.9rc1' into togreg
Immutable branch to allow mfd changes to also be available in Lee's MFD tree.
Eva Rachel Retuya [Fri, 28 Oct 2016 08:26:52 +0000 (16:26 +0800)]
staging: iio: cdc: ad7746: add additional config defines
Introduce defines for shifting and mask under the config register for
better readability. Also, introduce helper variables for index
calculation.
Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Brian Masney [Fri, 28 Oct 2016 10:00:21 +0000 (06:00 -0400)]
staging: iio: tsl2583: add locking to sysfs attributes
in_illuminance_input_target_show(), in_illuminance_input_target_store(),
in_illuminance_calibrate_store(), and in_illuminance_lux_table_store()
accesses data from the tsl2583_chip struct. Some of these fields can be
modified by other parts of the driver concurrently. This patch adds the
mutex locking to these sysfs attributes.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Brian Masney [Fri, 28 Oct 2016 10:00:20 +0000 (06:00 -0400)]
staging: iio: tsl2583: add error code to sysfs store functions
in_illuminance_input_target_store() and in_illuminance_calibrate_store()
validated the data from userspace, however it would not return an
error code to userspace if an invalid value was passed in. This patch
changes these functions so that they return -EINVAL if invalid data is
passed in.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Brian Masney [Fri, 28 Oct 2016 10:00:19 +0000 (06:00 -0400)]
staging: iio: tsl2583: use IIO_*_ATTR* macros to create sysfs entries
Use the IIO_CONST_ATTR, IIO_DEVICE_ATTR_RW, and IIO_DEVICE_ATTR_WO
macros for creating the in_illuminance_calibscale_available,
in_illuminance_integration_time_available, in_illuminance_input_target,
in_illuminance_calibrate, and in_illuminance_lux_table sysfs entries.
Previously these sysfs entries were prefixed with illuminance0_, however
they are now prefixed with in_illuminance_ to make these sysfs entries
consistent with how the IIO core is creating the other sysfs entries.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Brian Masney [Fri, 28 Oct 2016 10:00:18 +0000 (06:00 -0400)]
staging: iio: tsl2583: convert illuminance0_calibscale sysfs attr to use iio_chan_spec
The illuminance0_calibscale sysfs attribute is not currently created by
the IIO core. This patch adds the appropriate mask to iio_chan_spec,
along with the appropriate data handling in the read_raw() and
write_raw() functions, so that the sysfs attribute is created by the IIO
core. With this change, this sysfs entry will have its prefix changed
from illuminance0_ to in_illuminance_.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Brian Masney [Fri, 28 Oct 2016 10:00:17 +0000 (06:00 -0400)]
staging: iio: tsl2583: convert to use iio_chan_spec and {read,write}_raw
The tsl2583 driver directly creates sysfs attributes that should instead
be created by the IIO core on behalf of the driver. This patch adds the
iio_chan_spec array, the relevant info_mask elements and the read_raw()
and write_raw() functions to take advantage of features provided by the
IIO core. These sysfs attributes were migrated with this patch:
illuminance0_input, illuminance0_calibbias,
illuminance0_integration_time. This also exposes the raw values read
from the two channels on the sensor.
With this change, these four sysfs entries have their prefix changed
from illuminance0_ to in_illuminance_. This is deemed to be acceptable
since none of the IIO light drivers in mainline use the illuminance0_
prefix, however 8 of the IIO light drivers in mainline use the
in_illuminance_ prefix.
Also fix the units of integration_time to meet with the ABI.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Brian Masney [Fri, 28 Oct 2016 10:00:16 +0000 (06:00 -0400)]
staging: iio: tsl2583: check return values from taos_chip_{on,off}
The return value from taos_chip_on() and taos_chip_off() was not
checked in taos_luxtable_store() and taos_probe(). This patch adds
proper error checking to these function calls.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Brian Masney [Fri, 28 Oct 2016 10:00:15 +0000 (06:00 -0400)]
staging: iio: tsl2583: remove redundant power_state sysfs attribute
IIO devices have a /sys/bus/iio/devices/iio:deviceX/power/ directory
that allows viewing and controling various power parameters. The tsl2583
driver also has an additional custom sysfs attribute named power_state
that is not needed. This patch removes the redundant power_state sysfs
attribute.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Brian Masney [Fri, 28 Oct 2016 10:00:14 +0000 (06:00 -0400)]
staging: iio: tsl2583: return proper error code instead of -1
taos_als_calibrate() has a code path where -1 is returned. This patch
changes the code so that a proper error code is returned.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Brian Masney [Fri, 28 Oct 2016 10:00:13 +0000 (06:00 -0400)]
staging: iio: tsl2583: check for error code from i2c_smbus_read_byte()
taos_i2c_read() and taos_als_calibrate() does not check to see if the
value returned by i2c_smbus_read_byte() was an error code. This patch
adds the appropriate error handling.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Brian Masney [Fri, 28 Oct 2016 10:00:12 +0000 (06:00 -0400)]
staging: iio: tsl2583: add of_match table for device tree support
Add device tree support for the tsl2583 IIO driver with no custom
properties.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lorenzo Bianconi [Tue, 25 Oct 2016 21:09:04 +0000 (23:09 +0200)]
Documentation: dt: iio: accel: add lng2dm sensor device binding
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Lorenzo Bianconi [Tue, 25 Oct 2016 21:09:03 +0000 (23:09 +0200)]
iio: accel: st_accel: add support to lng2dm
add support to STMicroelectronics LNG2DM accelerometer to
st_accel framework
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Paul Kocialkowski [Tue, 25 Oct 2016 19:20:10 +0000 (21:20 +0200)]
iio: si7020: Add devicetree support and trivial bindings
This adds devicetree support for the si7020 iio driver. Since it works
well without requiring any additional property, its compatible string is
added to the trivial i2c devices bindings list.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Wei Yongjun [Sat, 29 Oct 2016 16:11:20 +0000 (16:11 +0000)]
iio: humidity: remove duplicated include from hts221_buffer.c
Remove duplicated include.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Jonathan Cameron [Sun, 30 Oct 2016 12:08:42 +0000 (12:08 +0000)]
iio:cros_ec_sensors: Swap from a select to a depends in Kconfig
Would have merged this into the original patch as a fixup but I've already
pushed that out as an immutable branch for others to use so it'll have
to be a separate patch. The original select had a typo as well.
Trying to do this via a select was opening a can of worms due to
a tree of other elements that would also have needed selecting.
A simple depends seems much mroe straight forward and appropriate in this
case.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Elise Lennion [Fri, 28 Oct 2016 00:24:27 +0000 (22:24 -0200)]
staging: sm750fb: Shorten local variables names.
Shorter names are preferred by C variables naming convention, they are
easier to write and aren't more difficult to understand.
Signed-off-by: Elise Lennion <elise.lennion@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Elise Lennion [Fri, 28 Oct 2016 00:23:35 +0000 (22:23 -0200)]
staging: sm750fb: Replace functions CamelCase naming with underscores.
Replace CamelCase function names with underscores to comply with
the standard kernel coding style.
Signed-off-by: Elise Lennion <elise.lennion@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Elise Lennion [Fri, 28 Oct 2016 00:22:28 +0000 (22:22 -0200)]
staging: sm750fb: Refine code in set_current_gate().
The 'switch' statement in set_current_gate() had only two possible
scenarios, so it was replaced with an 'if' statement to make the code
shorter and easier to understand.
Signed-off-by: Elise Lennion <elise.lennion@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Victor Carvajal [Sun, 30 Oct 2016 04:40:38 +0000 (21:40 -0700)]
Staging: rtl8188eu: Fix code indention found by checkpatch.
ERROR: code indent should use tabs where possible
+^I^I uint in_len, uint initial_out_len);$
Signed-off-by: Victor Carvajal <carva005@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Elise Lennion [Sat, 29 Oct 2016 00:29:57 +0000 (22:29 -0200)]
staging: rtl8188eu: Standardize test for NULL.
The test for NULL of the return variable of functions was changed from
(ret == NULL) to !ret to match the standard.
Coccinelle was used with semantic patch:
@@
expression e;
identifier id, f;
statement S;
@@
f(...) { <+...
id =
\(kmalloc\|devm_kzalloc\|kmalloc_array\|devm_ioremap
\|usb_alloc_urb\|alloc_netdev\|dev_alloc_skb\) (...)
... when any
when != id = e
+ if (!id)
- if (\(NULL == id\|id == NULL\))
S
...+> }
Signed-off-by: Elise Lennion <elise.lennion@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Elise Lennion [Sat, 29 Oct 2016 00:29:40 +0000 (22:29 -0200)]
staging: rtl8192u: Standardize test for NULL.
The test for NULL of the return variable of functions was changed from
(ret == NULL) to !ret to match the standard.
Coccinelle was used with semantic patch:
@@
expression e;
identifier id, f;
statement S;
@@
f(...) { <+...
id =
\(kmalloc\|devm_kzalloc\|kmalloc_array\|devm_ioremap
\|usb_alloc_urb\|alloc_netdev\|dev_alloc_skb\) (...)
... when any
when != id = e
+ if (!id)
- if (\(NULL == id\|id == NULL\))
S
...+> }
Signed-off-by: Elise Lennion <elise.lennion@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Elise Lennion [Sat, 29 Oct 2016 00:29:21 +0000 (22:29 -0200)]
staging: rtl8192e: Standardize test for NULL.
The test for NULL of the return variable of functions was changed from
(ret == NULL) to !ret to match the standard.
Coccinelle was used with semantic patch:
@@
expression e;
identifier id, f;
statement S;
@@
f(...) { <+...
id =
\(kmalloc\|devm_kzalloc\|kmalloc_array\|devm_ioremap
\|usb_alloc_urb\|alloc_netdev\|dev_alloc_skb\) (...)
... when any
when != id = e
+ if (!id)
- if (\(NULL == id\|id == NULL\))
S
...+> }
Signed-off-by: Elise Lennion <elise.lennion@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fernando Apesteguia [Fri, 28 Oct 2016 16:39:30 +0000 (18:39 +0200)]
staging: dgnc: Fix multi-line comment alignment
This fixes a checkpatch warning.
Also, change the line above so it is aligned to the others in the
same block.
Signed-off-by: Fernando Apesteguia <fernando.apesteguia@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fernando Apesteguia [Fri, 28 Oct 2016 16:16:13 +0000 (18:16 +0200)]
staging: dgnc: Fix lines longer than 80 chars.
Done by either unindenting some comments or converting them to
multi line comments.
This fixes some checkpatch warnings.
Signed-off-by: Fernando Apesteguia <fernando.apesteguia@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christian Gromm [Fri, 28 Oct 2016 12:46:20 +0000 (14:46 +0200)]
staging: most: hdm-usb: add comment
This patch adds a comment to function hdm_configure_channel() to clarify
its execution paths.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wang di [Thu, 27 Oct 2016 22:12:03 +0000 (18:12 -0400)]
staging: lustre: llog: record the minimum record size
The minimum record size will be recorded in llh_size, which is
only used by fixed size record llog now, and also add another
flag LLOG_F_IS_FIXSIZE to indicate the fix size record llog.
Signed-off-by: wang di <di.wang@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7050
Reviewed-on: http://review.whamcloud.com/16103
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Zhuravlev [Thu, 27 Oct 2016 22:12:02 +0000 (18:12 -0400)]
staging: lustre: ptlrpc: imp_peer_committed_transno should increase
imp_peer_committed_transno should not decrease as this can
confuse the users if imp_peer_committed_transno is used to
check commit status.
Signed-off-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7079
Reviewed-on: http://review.whamcloud.com/16161
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Reviewed-by: wangdi <di.wang@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Evans [Thu, 27 Oct 2016 22:12:01 +0000 (18:12 -0400)]
staging: lustre: headers: Create single .h for lu_seq_range
Put lu_seq_range related functions into a single .h.
Include directly from files which use it, and remove
definitions from lustre_idl.h.
Signed-off-by: Ben Evans <bevans@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6401
Reviewed-on: http://review.whamcloud.com/15952
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sebastien Buisson [Thu, 27 Oct 2016 22:12:00 +0000 (18:12 -0400)]
staging: lustre: ptlrpc: do not switch out-of-date context
When trying to replace a dead sec context with a new one, we must
ensure the new context is already up-to-date.
If it is not the case, just return from sptlrpc_req_replace_dead_ctx()
and come later when the new context has been updated.
Signed-off-by: Sebastien Buisson <sebastien.buisson@bull.net>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6536
Reviewed-on: http://review.whamcloud.com/15708
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Henri Doreau [Thu, 27 Oct 2016 22:11:59 +0000 (18:11 -0400)]
staging: lustre: llite: Inform copytool of dataversion changes
Notify copytool that a file could not be archived due to dataversion
change. This does not introduce any functional change but ensures
that errors are consistently reported in copytool logs.
Signed-off-by: Henri Doreau <henri.doreau@cea.fr>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5683
Reviewed-on: http://review.whamcloud.com/14377
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Robert Read <robert.read@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Henri Doreau [Thu, 27 Oct 2016 22:11:58 +0000 (18:11 -0400)]
staging: lustre: ptlrpc: Forbid too early NRS policy tunings
Wait for a NRS policy to be fully started before allowing
to apply related tunings, so that all fields are properly
initialized.
Signed-off-by: Henri Doreau <henri.doreau@cea.fr>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6673
Reviewed-on: http://review.whamcloud.com/15104
Reviewed-by: Emoly Liu <emoly.liu@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sebastien Buisson [Thu, 27 Oct 2016 22:11:57 +0000 (18:11 -0400)]
staging: lustre: ptlrpc: do not sleep if encpool reached max capacity
When encryption is enabled RPCs are encrypted just before being
sent. The encryption requires allocating memory in the encoding pool.
The current implementation in sptlrpc_enc_pool_get_pages() is
deadlock-prone. Indeed, if there is no more free pages in the pool,
all ptlrpcd threads can end up waiting in a queue, so there is no
thread available to process other requests. It means client is not
able to process replies from servers that yet contain last committed
transno useful to release memory allocated by previous requests,
including enc_pool pages.
To fix this, in sptlrpc_enc_pool_get_pages(), do not make ptlrpcd
threads wait in queue if encoding pool has already reached its maximum
capacity. Instead, return -ENOMEM. If functions calling ptl_send_rpc()
get -ENOMEM, then put back request in queue by moving it back to
RQ_PHASE_NEW phase.
As an optimization, do not call ptl_send_rpc() again for requests that
already failed to allocate in the enc_pool, as long as there is not
enough memory in the enc_pool to satisfy theirs needs.
In /sys/fs/lustre/sptlrpc/encrypt_page_pools, add a new 'out of mem'
stat to track how many requests fail to allocate memory in the
enc_pool.
Signed-off-by: Sebastien Buisson <sebastien.buisson@bull.net>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6356
Reviewed-on: http://review.whamcloud.com/15070
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hiroya Nozaki [Thu, 27 Oct 2016 22:11:55 +0000 (18:11 -0400)]
staging: lustre: obdclass: race lustre_profile_list
Running multiple mounts at the same time results in
lustre_profile_list corruption when adding a new profile.
This patch adds a new spin_lock to protect the list and
avoid the bug
Signed-off-by: Hiroya Nozaki <nozaki.hiroya@jp.fujitsu.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6600
Reviewed-on: http://review.whamcloud.com/14896
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Jian Yu <jian.yu@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Niu Yawei [Thu, 27 Oct 2016 22:11:54 +0000 (18:11 -0400)]
staging: lustre: recovery: don't skip open replay on reconnect
Once reconnect happened during replay, we'd continue the open
replay with the last failed replay, but not the next.
Signed-off-by: Niu Yawei <yawei.niu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6802
Reviewed-on: http://review.whamcloud.com/15871
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Hongchao Zhang <hongchao.zhang@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Niu Yawei [Thu, 27 Oct 2016 22:11:53 +0000 (18:11 -0400)]
staging: lustre: ldlm: reclaim granted locks defensively
It was discovered that to many ldlm locks where being
created on the server side to the point of memory
exhaustion. The work of LU-6529 introduced watermarks
to avoid this memory exhaustion. This is the client
side part of this work for the upstream client.
Signed-off-by: Niu Yawei <yawei.niu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6529
Reviewed-on: http://review.whamcloud.com/14931
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6929
Reviewed-on: http://review.whamcloud.com/15813
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hongchao Zhang [Thu, 27 Oct 2016 22:11:52 +0000 (18:11 -0400)]
staging: lustre: mdt: disable IMA support
For IMA (Integrity Measurement Architecture), there are two xattr
"security.ima" and "security.evm" to protect the file to be modified
accidentally or maliciously, the two xattr are not compatible with
VBR, then disable it to workaround the problem currently and enable
it when the conditions are ready.
Signed-off-by: Hongchao Zhang <hongchao.zhang@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6455
Reviewed-on: http://review.whamcloud.com/14928
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wang di [Thu, 27 Oct 2016 22:11:51 +0000 (18:11 -0400)]
staging: lustre: ptlrpc: replay bulk request
Even though the server might already got the bulk
replay request, but bulk transfer timeout, let's
replay the bulk request, i.e. treat such replay as
same as no replied replay request (See
ptlrpc_replay_interpret()).
Signed-off-by: wang di <di.wang@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6924
Reviewed-on: http://review.whamcloud.com/15793
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Niu Yawei <yawei.niu@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wang di [Thu, 27 Oct 2016 22:11:50 +0000 (18:11 -0400)]
staging: lustre: mdc: deactive MDT permanently
Add active proc entry for MDC, and mark MDC to
be inactive once the MDC is deactivated.
Signed-off-by: wang di <di.wang@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6586
Reviewed-on: http://review.whamcloud.com/14747
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Niu Yawei [Thu, 27 Oct 2016 22:11:49 +0000 (18:11 -0400)]
staging: lustre: obdecho: don't copy lu_site
While creating an echo device, echo_device_alloc() copies the lu_site
from MD stack, such kind of copy result in uninitialized mutex and
other potential issues.
Instead of copying the lu_site, we'd use the lu_site by pointer directly.
Signed-off-by: Niu Yawei <yawei.niu@intel.com>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6765
Reviewed-on: http://review.whamcloud.com/15657
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wang di [Thu, 27 Oct 2016 22:11:48 +0000 (18:11 -0400)]
staging: lustre: ptlrpc: Do not resend req with allow_replay
If the request is allowed to be sent during recovery,
and it is not timeout yet, then we do not need to
resend it in the final stage of recovery.
Unnecessary resend will cause the bulk request to resend the
request with different mbit, but same xid, and on the remote
server side, it will drop such request with same xid, so it
will never get the bulk in this case.
Signed-off-by: wang di <di.wang@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6780
Reviewed-on: http://review.whamcloud.com/15458
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Liang Zhen <liang.zhen@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wang di [Thu, 27 Oct 2016 22:11:47 +0000 (18:11 -0400)]
staging: lustre: llite: report back to user bad stripe count
If the user is requesting a stripe count larger than what
is supported in the file system then report back to the
user an error as well as what is the largest possible
striping.
Signed-off-by: wang di <di.wang@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6602
Reviewed-on: http://review.whamcloud.com/15162
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sebastien Buisson [Thu, 27 Oct 2016 22:11:45 +0000 (18:11 -0400)]
staging: lustre: llite: basic support of SELinux in CLIO
Bring the ability to properly initiate security context
on SELinux-enabled client and store it on server side via
extended attribute.
Security context initialization is not atomic, but that would
require a wire protocol change to send security label in the
creation request.
Filter out security.selinux from xattr cache as it is
already cached in system slab.
Signed-off-by: Sebastien Buisson <sebastien.buisson@bull.net>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5560
Reviewed-on: http://review.whamcloud.com/11648
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gregoire Pichon [Thu, 27 Oct 2016 22:11:44 +0000 (18:11 -0400)]
staging: lustre: ptlrpc: embed highest XID in each request
Atomically assign XIDs and put request and sending list so
we can learn the lowest unreplied XID at any point.
This allows to embed in every resquests the highest XID for
which a reply has been received and does not have an unreplied
lower-numbered XID.
This will be used by the MDT target to release in-memory
reply data corresponding to XIDs of reply received by the client.
Signed-off-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Signed-off-by: Gregoire Pichon <gregoire.pichon@bull.net>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5319
Reviewed-on: http://review.whamcloud.com/14793
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lai Siyao [Thu, 27 Oct 2016 22:11:43 +0000 (18:11 -0400)]
staging: lustre: dne: setdirstripe should fail if not supported
If MDS doesn't support striped directory, creating striped directory
from a userland utility such as 'lfs setdirstripe' should fail.
Signed-off-by: Lai Siyao <lai.siyao@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6661
Reviewed-on: http://review.whamcloud.com/15123
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bobi Jam [Thu, 27 Oct 2016 22:11:42 +0000 (18:11 -0400)]
staging: lustre: clio: update file attributes after sync
This really only affects clients that are attached to lustre
server running ZFS, because zfs does not update # of blocks
until the blocks are flushed to disk.
This patch update file's blocks attribute after OST_SYNC completes.
Signed-off-by: Bobi Jam <bobijam.xu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4389
Reviewed-on: http://review.whamcloud.com/12915
Reviewed-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Thu, 27 Oct 2016 22:11:41 +0000 (18:11 -0400)]
staging: lustre: lov: remove LSM from struct lustre_md
In struct lustre_md replace the struct lov_stripe_md *lsm member with
an opaque struct lu_buf layout which holds the layout metadata
returned by the server. Refactor the LOV object initialization and
layout change code to accommodate this. Simplify lov_unpackmd() and
supporting functions according to the reduced number of use cases.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5814
Reviewed-on: http://review.whamcloud.com/13722
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>