OSDN Git Service
Jan Kratochvil [Fri, 10 Apr 2009 15:57:52 +0000 (15:57 +0000)]
gdb/
* varobj.c (varobj_invalidate): Fix indentation.
Jan Kratochvil [Fri, 10 Apr 2009 03:36:29 +0000 (03:36 +0000)]
* gdbtypes.c: Remove excessive parentheses at the return keywords.
Alan Modra [Fri, 10 Apr 2009 01:00:05 +0000 (01:00 +0000)]
daily update
gdbadmin [Fri, 10 Apr 2009 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Joel Brobecker [Thu, 9 Apr 2009 20:11:57 +0000 (20:11 +0000)]
* gdb.texinfo (Set Breaks): Rewrite a paragraph to avoid a warning
about a missing dot or coma after @xref.
H.J. Lu [Thu, 9 Apr 2009 15:54:10 +0000 (15:54 +0000)]
2009-04-09 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
* configure.ac: Bump minimum GMP/MPFR versions to 4.2 and 2.3.1.
* configure: Regenerate.
H.J. Lu [Thu, 9 Apr 2009 15:40:57 +0000 (15:40 +0000)]
2009-04-09 H.J. Lu <hongjiu.lu@intel.com>
PR gas/10039
* configure.ac: Require texinfo 4.7.
* configure: Regenerated.
H.J. Lu [Thu, 9 Apr 2009 15:39:50 +0000 (15:39 +0000)]
2009-04-09 Steve Ellcey <sje@cup.hp.com>
* Makefil.def (languages): New entries.
* Makefile.tpl (check-gcc-*): New generic target.
* Makefile.in: Regenerate.
Alan Modra [Thu, 9 Apr 2009 01:00:04 +0000 (01:00 +0000)]
daily update
gdbadmin [Thu, 9 Apr 2009 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
DJ Delorie [Wed, 8 Apr 2009 20:39:35 +0000 (20:39 +0000)]
[cgen]
* cpu/mep-c5.cpu: New.
* cpu/mep-core.cpu: Add C5 support.
* cpu/mep.opc: Likewise.
[opcodes]
* mep-asm.c: Regenerate.
* mep-desc.c: Regenerate.
* mep-desc.h: Regenerate.
* mep-dis.c: Regenerate.
* mep-ibld.c: Regenerate.
* mep-opc.c: Regenerate.
* mep-opc.h: Regenerate.
[sid]
* component/cache/cache.cxx (cache_component::cache_component):
Add write_hint_pin(). Attach it to write-hint.
(cache_component::write_hint): New.
* component/cache/cache.h (write_hint_pin): New.
(write_hint): New.
* component/cgen-cpu/mep/Makefile.am: Regenerate.
* component/cgen-cpu/mep/Makefile.in: Regenerate.
* component/cgen-cpu/mep/mep-core1-decode.cxx: Regenerate.
* component/cgen-cpu/mep/mep-core1-decode.h: Regenerate.
* component/cgen-cpu/mep/mep-core1-defs.h: Regenerate.
* component/cgen-cpu/mep/mep-core1-model.cxx: Regenerate.
* component/cgen-cpu/mep/mep-core1-model.h: Regenerate.
* component/cgen-cpu/mep/mep-core1-sem.cxx: Regenerate.
* component/cgen-cpu/mep/mep-decode.cxx: Regenerate.
* component/cgen-cpu/mep/mep-decode.h: Regenerate.
* component/cgen-cpu/mep/mep-defs.h: Regenerate.
* component/cgen-cpu/mep/mep-desc.h: Regenerate.
* component/cgen-cpu/mep/mep-model.cxx: Regenerate.
* component/cgen-cpu/mep/mep-model.h: Regenerate.
* component/cgen-cpu/mep/mep-sem.cxx: Regenerate.
* component/cgen-cpu/mep/mep.cxx (mep_cpu): Connect
write-hint pin.
(do_cache): Add C5 support.
(do_cache_prefetch): Likewise.
(do_casb3, do_cash3, do_casw3): New.
* component/cgen-cpu/mep/mep.h: Add C5 support and write-hint pin.
(do_casb3, do_cash3, do_casw3): New.
* component/families/mep/Makefile.in: Regenerate.
* component/families/mep/dsu.in: Add C5 support.
* main/dynamic/mainDynamic.cxx: Add C5 support.
* main/dynamic/mepCfg.cxx: Connect write-hint pin.
* main/dynamic/mepCfg.h: Add C5 support.
DJ Delorie [Wed, 8 Apr 2009 16:42:56 +0000 (16:42 +0000)]
merge from gcc
H.J. Lu [Wed, 8 Apr 2009 16:04:48 +0000 (16:04 +0000)]
bfd/
2009-04-08 H.J. Lu <hongjiu.lu@intel.com>
* elflink.c (elf_link_add_object_symbols): Warn alternate ELF
machine code.
include/
2009-04-08 H.J. Lu <hongjiu.lu@intel.com>
* bfdlink.h (bfd_link_info): Add warn_alternate_em.
ld/
2009-04-08 H.J. Lu <hongjiu.lu@intel.com>
* lexsup.c (option_values): Add OPTION_WARN_ALTERNATE_EM.
(ld_options): Likewise.
(parse_args): Likewise.
* ld.texinfo: Document --warn-alternate-em.
* NEWS: Mention --warn-alternate-em.
Vladimir Prus [Wed, 8 Apr 2009 06:58:36 +0000 (06:58 +0000)]
Implement -exec-jump.
* mi/mi-cmds.h (mi_cmd_exec_jump): Declare.
* mi/mi-main.c (mi_cmd_exec_jump): New.
* mi/mi-cmds.c (mi_cmds): Register exec-jump.
DJ Delorie [Wed, 8 Apr 2009 02:24:18 +0000 (02:24 +0000)]
[include/elf]
* mep.h (EF_MEP_CPU_C5): New.
[bfd]
* archures.c: Add bfd_mach_mep_c5.
* bfd-in2.h: Likewise.
* cpu-mep.c: Add bfd_c5_arch.
* elf32-mep.c: Support it.
[gas]
* config/tc-mep.c: Add UCI/DSP instruction support. Add C5 support.
(md_show_usage): Change default endian to little.
* config/tc-mep.h (TARGET_BYTES_BIG_ENDIAN): Change default to little.
[ld]
* emulparams/elf32mep.sh: Change default endian to little.
Alan Modra [Wed, 8 Apr 2009 01:00:09 +0000 (01:00 +0000)]
daily update
gdbadmin [Wed, 8 Apr 2009 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
Doug Evans [Tue, 7 Apr 2009 20:43:49 +0000 (20:43 +0000)]
* symfile.c (symbol_file_clear): Fix indentation.
H.J. Lu [Tue, 7 Apr 2009 20:04:07 +0000 (20:04 +0000)]
2009-04-07 H.J. Lu <hongjiu.lu@intel.com>
* elflink.c (_bfd_elf_section_already_linked): Add `\n' for
info->callbacks->einfo.
* linker.c (_bfd_generic_section_already_linked): Likewise.
Peter Bergner [Tue, 7 Apr 2009 18:28:02 +0000 (18:28 +0000)]
opcodes/
* ppc-opc.c (powerpc_opcodes) <"tlbilxlpid", "tlbilxpid", "tlbilxva",
"tlbilx">: Use secondary opcode "18" as per the ISA 2.06 documentation.
Reorder entries so the extended mnemonics are listed before tlbilx.
gas/testsuite/
* gas/ppc/e500mc.d: Update to match extended mnemonics.
DJ Delorie [Tue, 7 Apr 2009 18:21:20 +0000 (18:21 +0000)]
[bfd]
* elf32-h8300.c (elf32_h8_relax_section): Relax MOVA opcodes.
[gas]
* tc-h8300.c (do_a_fix_imm): Pass the insn, force relocs for MOVA
immediates.
(build_bytes): Pass insn to do_a_fix_imm.
[include/opcode]
* h8300.h: Add relaxation attributes to MOVA opcodes.
Alan Modra [Tue, 7 Apr 2009 01:00:05 +0000 (01:00 +0000)]
daily update
gdbadmin [Tue, 7 Apr 2009 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
H.J. Lu [Mon, 6 Apr 2009 16:48:35 +0000 (16:48 +0000)]
2009-04-06 H.J. Lu <hongjiu.lu@intel.com>
* coff-x86_64.c (bfd_pe_print_pdata): Defined to
_bfd_pex64_print_pdata only if PE is defined.
* libpei.h (_bfd_pep_print_x64_pdata): Renamed to ...
(_bfd_pex64_print_pdata): This.
* peXXigen.c (_bfd_pep_print_x64_pdata): Renamed to ...
(_bfd_pex64_print_pdata): This. Defined only if COFF_WITH_pex64
is defined.
Alan Modra [Mon, 6 Apr 2009 01:00:05 +0000 (01:00 +0000)]
daily update
gdbadmin [Mon, 6 Apr 2009 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Mark Kettenis [Sun, 5 Apr 2009 22:37:19 +0000 (22:37 +0000)]
* sparc64nbsd-nat.c (sparc64nbsd_supply_pcb): Fix comment.
Kai Tietz [Sun, 5 Apr 2009 18:12:20 +0000 (18:12 +0000)]
2009-04-05 Kai Tietz <kai.tietz@onevision.com>
* coff-x86_64.c (bfd_pe_print_pdata): Define as
_bfd_pep_print_x64_pdata.
* libpei.h (_bfd_pep_print_x64_pdata): Add prototype.
* peXXigen.c (_bfd_pep_print_x64_pdata): New.
Alan Modra [Sun, 5 Apr 2009 01:00:05 +0000 (01:00 +0000)]
daily update
gdbadmin [Sun, 5 Apr 2009 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
gdbadmin [Sat, 4 Apr 2009 00:00:34 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Sat, 4 Apr 2009 00:00:05 +0000 (00:00 +0000)]
daily update
Ulrich Weigand [Fri, 3 Apr 2009 20:15:51 +0000 (20:15 +0000)]
* inferiors.c (get_thread_process): Make global.
* server.h (get_thread_process): Add prototype.
* thread-db.c (find_one_thread): Use get_thread_process
instead of current_process.
(thread_db_get_tls_address): Do not crash if called when
thread layer is not yet initialized.
Ulrich Weigand [Fri, 3 Apr 2009 16:07:03 +0000 (16:07 +0000)]
* ppc-linux-nat.c (ppc_linux_target_wordsize): New function.
(ppc_linux_auxv_parse): New function.
(ppc_linux_read_description): Use ppc_linux_target_wordsize.
(_initialize_ppc_linux_nat): Install ppc_linux_auxv_parse.
sterling [Fri, 3 Apr 2009 16:06:39 +0000 (16:06 +0000)]
2009-04-02 Sterling Augustine <sterling@jaw.hq.tensilica.com>
* elf32-xtensa.c (relax_property_section): Always set r_offset
to zero.
Ulrich Weigand [Fri, 3 Apr 2009 14:38:38 +0000 (14:38 +0000)]
* remote-utils.c (prepare_resume_reply): Null-terminate packet.
* spu-low.c (current_tid): Rename to ...
(current_ptid): ... this.
(fetch_ppc_register, fetch_ppc_memory, store_ppc_memory,
spu_proc_xfer_spu, spu_resume, spu_request_interrupt): Use
ptid_get_lwp (current_ptid) instead of current_tid.
(spu_kill, spu_detach, spu_join, spu_wait): Use pid argument
instead of current_tid. Use find_process_pid to verify pid
argument is valid. Pass proper argument to remove_process.
(spu_thread_alive): Compare current_ptid instead of current_tid.
(spu_resume): Likewise.
Ulrich Weigand [Fri, 3 Apr 2009 14:37:56 +0000 (14:37 +0000)]
* spu-linux-nat.c (spu_bfd_open): Set filename of in-memory
BFD to contents of SPU name note.
(spu_symbol_file_add_from_memory): Call symbol_file_add_from_bfd
with "from_tty" argument 1 instead of 0.
Ulrich Weigand [Fri, 3 Apr 2009 14:37:03 +0000 (14:37 +0000)]
* gdb.base/attach.exp: Re-enable for spu*-*-* targets.
* gdb.server/ext-attach.exp: Likewise.
Pedro Alves [Fri, 3 Apr 2009 11:40:02 +0000 (11:40 +0000)]
* linux-low.c (usr_store_inferior_registers): Declare local `pid'
variable.
Vladimir Prus [Fri, 3 Apr 2009 11:23:18 +0000 (11:23 +0000)]
Eliminate some sleep usage.
* gdb.mi/basics.c (do_nothing): New.
(main): Use do_nothing instead of printf, so that
not to introduce race condition between output of
inferiour and output of gdb. Do not use sleep as it
is not generally available on embedded targets.
Alan Modra [Fri, 3 Apr 2009 00:00:05 +0000 (00:00 +0000)]
daily update
gdbadmin [Fri, 3 Apr 2009 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Pedro Alves [Thu, 2 Apr 2009 22:40:09 +0000 (22:40 +0000)]
* gdb.server/ext-attach.exp: Expect an optional process id after
"Detached from remote process".
Jan Kratochvil [Thu, 2 Apr 2009 21:01:40 +0000 (21:01 +0000)]
gdb/
* dwarf2read.c
(new_symbol <DW_TAG_variable> <!DW_AT_location> <DW_AT_external>):
Create the symbol in local scope.
* symtab.h (cu->list_in_scope <LOC_UNRESOLVED>): New comment part.
gdb/testsuite/
* gdb.dwarf2/dw2-unresolved-main.c, gdb.dwarf2/dw2-unresolved.S,
gdb.dwarf2/dw2-unresolved.exp: New.
Keith Seitz [Thu, 2 Apr 2009 17:34:24 +0000 (17:34 +0000)]
* stabsread.c (read_member_functions): GCC may emit an extra space
at the end of the names "__base_ctor" and "__base_dtor"; so ignore
whitespace when looking for these functions.
Pedro Alves [Thu, 2 Apr 2009 16:11:47 +0000 (16:11 +0000)]
* gdb.mi/mi-nonstop-exit.exp: Don't check isnative. Use
mi_run_to_main.
Joel Brobecker [Thu, 2 Apr 2009 15:56:08 +0000 (15:56 +0000)]
* gdb.texinfo (Backtrace): Add a parameter in frame 1 of the first
example, and add a small explanation about it.
(Print Settings): Change the documentation of the "set print
frame-arguments" to reflect the fact that the default is now "scalars".
Joel Brobecker [Thu, 2 Apr 2009 15:54:49 +0000 (15:54 +0000)]
* gdb.texinfo (Print Settings): Add kindex for command "set
print frame-arguments".
Pedro Alves [Thu, 2 Apr 2009 15:43:09 +0000 (15:43 +0000)]
* gdb.mi/mi-nonstop.exp: Don't check isnative. Use
mi_run_to_main. Skip thread exit test on remote targets.
* gdb.mi/mi-nsintrall.exp: Don't check isnative. Use
mi_run_to_main.
* gdb.mi/mi-nsmoribund.exp: Don't check isnative. Use
mi_run_to_main.
* lib/mi-support.exp (mi_gdb_target_cmd): Remove trailing anchor
when expecting ^connected. Detect when the target doesn't support
non-stop mode.
(mi_run_cmd): Detect if non-stop mode was requested by isn't
supported. Return -1 on error, 0 on success.
(mi_runto_helper): Don't expect a stop if mi_run_cmd failed.
(mi_runto): Return mi_runto_helper's result explicitly.
clyon [Thu, 2 Apr 2009 14:12:44 +0000 (14:12 +0000)]
2009-04-02 Christophe Lyon <christophe.lyon@st.com>
bfd/
* elf32-arm.c (elf32_arm_stub_long_branch_v4t_thumb_thumb,
elf32_arm_stub_long_branch_v4t_thumb_thumb_pic): Two new long
branch stubs.
(elf32_arm_stub_type): New enum values for the two new stubs.
(arm_type_of_stub): Make use of the two new stubs.
(arm_size_one_stub): Handle the two new stubs.
testsuite/
* ld-arm/farcall-thumb-thumb-pic-veneer.d: Update expected
results.
* ld-arm/farcall-thumb-thumb.d: Likewise.
Peter Bergner [Thu, 2 Apr 2009 13:30:53 +0000 (13:30 +0000)]
opcodes/
* ppc-dis.c (powerpc_init_dialect): Do not choose a default dialect
due to -many/-Many.
(print_insn_powerpc): Make sure we only deprecate instructions using
the original dialect and not a modified dialect due to -Many handling.
Move the handling of the condition register and default operands to
the end of the if/else if/else chain.
* ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
instructions from newer processors are listed before older ones.
<"icblce", "sync", "eieio", "tlbld">: Deprecate for processors
that have instructions with conflicting opcodes.
Peter Bergner [Thu, 2 Apr 2009 00:42:28 +0000 (00:42 +0000)]
opcodes/
* ppc-opc.c (powerpc_opcodes) <"dcbzl">: Merge the POWER4 and
E500MC entries.
Matt Thomas [Thu, 2 Apr 2009 00:20:41 +0000 (00:20 +0000)]
2009-04-01 Matt Thomas <matt@netbsd.org>
* elf32-vax.c (elf_vax_check_relocs): Do not put relocations against
hidden symbols into the GOT or PLT.GOT.
(elf_vax_relocate_section): Do not emit a PCREL reloc
into a shared object if it is against a hidden symbol.
Alan Modra [Thu, 2 Apr 2009 00:00:08 +0000 (00:00 +0000)]
daily update
gdbadmin [Thu, 2 Apr 2009 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Pedro Alves [Wed, 1 Apr 2009 22:50:24 +0000 (22:50 +0000)]
2009-04-01 Pedro Alves <pedro@codesourcery.com>
Implement the multiprocess extensions, and add linux multiprocess
support.
* server.h (ULONGEST): Declare.
(struct ptid, ptid_t): New.
(minus_one_ptid, null_ptid): Declare.
(ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_lwp)
(ptid_get_tid, ptid_equal, ptid_is_pid): Declare.
(struct inferior_list_entry): Change `id' type from unsigned from
to ptid_t.
(struct sym_cache, struct breakpoint, struct
process_info_private): Forward declare.
(struct process_info): Declare.
(current_process): Declare.
(all_processes): Declare.
(initialize_inferiors): Declare.
(add_thread): Adjust to use ptid_t.
(thread_id_to_gdb_id, thread_to_gdb_id, gdb_id_to_thread_id): Ditto.
(add_process, remove_process, find_thread_pid): Declare.
(find_inferior_id): Adjust to use ptid_t.
(cont_thread, general_thread, step_thread): Change type to ptid_t.
(multi_process): Declare.
(push_event): Adjust to use ptid_t.
(read_ptid, write_ptid): Declare.
(prepare_resume_reply): Adjust to use ptid_t.
(clear_symbol_cache): Declare.
* inferiors.c (all_processes): New.
(null_ptid, minus_one_ptid): New.
(ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_lwp)
(ptid_get_tid, ptid_equal, ptid_is_pid): New.
(add_thread): Change unsigned long to ptid. Remove gdb_id
parameter. Adjust.
(thread_id_to_gdb_id, thread_to_gdb_id): Change unsigned long to ptid.
(gdb_id_to_thread): Rename to ...
(find_thread_pid): ... this. Change unsigned long to ptid.
(gdb_id_to_thread_id, find_inferior_id): Change unsigned long to ptid.
(loaded_dll, pull_pid_from_list): Adjust.
(add_process, remove_process, find_process_pid)
(get_thread_process, current_process, initialize_inferiors): New.
* target.h (struct thread_resume) <thread>: Change type to ptid_t.
(struct target_waitstatus) <related_pid>: Ditto.
(struct target_ops) <kill, detach>: Add `pid' argument. Change
return type to int.
(struct target_ops) <join>: Add `pid' argument.
(struct target_ops) <thread_alive>: Change pid's type to ptid_t.
(struct target_ops) <wait>: Add `ptid' field. Change return type
to ptid.
(kill_inferior, detach_inferior, join_inferior): Add `pid' argument.
(mywait): Add `ptid' argument. Change return type to ptid_t.
(target_pid_to_str): Declare.
* target.c (set_desired_inferior): Adjust to use ptids.
(mywait): Add new `ptid' argument. Adjust.
(target_pid_to_str): New.
* mem-break.h (free_all_breakpoints): Declare.
* mem-break.c (breakpoints): Delelete.
(set_breakpoint_at, delete_breakpoint, find_breakpoint_at)
(check_mem_read, check_mem_write, delete_all_breakpoints): Adjust
to use per-process breakpoint list.
(free_all_breakpoints): New.
* remote-utils.c (struct sym_cache) <name>: Drop `const'.
(symbol_cache, all_symbols_looked_up): Delete.
(hexchars): New.
(ishex, unpack_varlen_hex, write_ptid, hex_or_minus_one,
read_ptid): New.
(prepare_resume_reply): Change ptid argument's type from unsigned
long to ptid_t. Adjust. Implement W;process and X;process.
(free_sym_cache, clear_symbol_cache): New.
(look_up_one_symbol): Adjust to per-process symbol cache. *
* server.c (cont_thread, general_thread, step_thread): Change type
to ptid_t.
(attached): Delete.
(multi_process): New.
(last_ptid): Change type to ptid_t.
(struct vstop_notif) <ptid>: Change type to ptid_t.
(queue_stop_reply, push_event): Change `ptid' argument's type to
ptid_t.
(discard_queued_stop_replies): Add `pid' argument.
(start_inferior): Adjust to use ptids. Adjust to mywait interface
changes. Don't reference the `attached' global.
(attach_inferior): Adjust to mywait interface changes.
(handle_query): Adjust to use ptids. Parse GDB's qSupported
features. Handle and report "multiprocess+". Handle
"qAttached:PID".
(handle_v_cont): Adjust to use ptids. Adjust to mywait interface
changes.
(handle_v_kill): New.
(handle_v_stopped): Adjust to use target_pid_to_str.
(handle_v_requests): Allow multiple attaches and runs when
multiprocess extensions are in effect. Handle "vKill".
(myresume): Adjust to use ptids.
(queue_stop_reply_callback): Add `arg' parameter. Handle it.
(handle_status): Adjust to discard_queued_stop_replies interface
change.
(first_thread_of, kill_inferior_callback)
(detach_or_kill_inferior_callback, join_inferiors_callback): New.
(main): Call initialize_inferiors. Adjust to use ptids, killing
and detaching from all inferiors. Handle multiprocess packet
variants.
* linux-low.h: Include gdb_proc_service.h.
(struct process_info_private): New.
(struct linux_target_ops) <pid_of>: Use ptid_get_pid.
<lwpid_of>: Use ptid_get_lwp.
(get_lwp_thread): Adjust.
(struct lwp_info): Add `dead' member.
(find_lwp_pid): Declare.
* linux-low.c (thread_db_active): Delete.
(new_inferior): Adjust comment.
(inferior_pid): Delete.
(linux_add_process): New.
(handle_extended_wait): Adjust.
(add_lwp): Change unsigned long to ptid.
(linux_create_inferior): Add process to processes table. Adjust
to use ptids. Don't set new_inferior here.
(linux_attach_lwp): Rename to ...
(linux_attach_lwp_1): ... this. Add `initial' argument. Handle
it. Adjust to use ptids.
(linux_attach_lwp): New.
(linux_attach): Add process to processes table. Don't set
new_inferior here.
(struct counter): New.
(second_thread_of_pid_p, last_thread_of_process_p): New.
(linux_kill_one_lwp): Add `args' parameter. Handle it. Adjust to
multiple processes.
(linux_kill): Add `pid' argument. Handle it. Adjust to multiple
processes. Remove process from process table.
(linux_detach_one_lwp): Add `args' parameter. Handle it. Adjust
to multiple processes.
(any_thread_of): New.
(linux_detach): Add `pid' argument, and handle it. Remove process
from processes table.
(linux_join): Add `pid' argument. Handle it.
(linux_thread_alive): Change unsighed long argument to ptid_t.
Consider dead lwps as not being alive.
(status_pending_p): Rename `dummy' argument to `arg'. Filter out
threads we're not interested in.
(same_lwp, find_lwp_pid): New.
(linux_wait_for_lwp): Change `pid' argument's type from int to
ptid_t. Adjust.
(linux_wait_for_event): Rename to ...
(linux_wait_for_event_1): ... this. Change `pid' argument's type
from int to ptid_t. Adjust.
(linux_wait_for_event): New.
(linux_wait_1): Add `ptid' argument. Change return type to
ptid_t. Adjust. Use last_thread_of_process_p. Remove processes
that exit from the process table.
(linux_wait): Add `ptid' argument. Change return type to ptid_t.
Adjust.
(mark_lwp_dead): New.
(wait_for_sigstop): Adjust to use ptids. If a process exits while
stopping all threads, mark its main lwp as dead.
(linux_set_resume_request, linux_resume_one_thread): Adjust to use
ptids.
(fetch_register, usr_store_inferior_registers)
(regsets_fetch_inferior_registers)
(regsets_store_inferior_registers, linux_read_memory)
(linux_write_memory): Inline `inferior_pid'.
(linux_look_up_symbols): Adjust to use per-process
`thread_db_active'.
(linux_request_interrupt): Adjust to use ptids.
(linux_read_auxv): Inline `inferior_pid'.
(initialize_low): Don't reference thread_db_active.
* gdb_proc_service.h (struct ps_prochandle) <pid>: Remove.
* proc-service.c (ps_lgetregs): Use find_lwp_pid.
(ps_getpid): Return the pid of the current inferior.
* thread-db.c (proc_handle, thread_agent): Delete.
(thread_db_create_event, thread_db_enable_reporting): Adjust to
per-process data.
(find_one_thread): Change argument type to ptid_t. Adjust to
per-process data.
(maybe_attach_thread): Adjust to per-process data and ptids.
(thread_db_find_new_threads): Ditto.
(thread_db_init): Ditto.
* spu-low.c (spu_create_inferior, spu_attach): Add process to
processes table. Adjust to use ptids.
(spu_kill, spu_detach): Adjust interface. Remove process from
processes table.
(spu_join, spu_thread_alive): Adjust interface.
(spu_wait): Adjust interface. Remove process from processes
table. Adjust to use ptids.
* win32-low.c (current_inferior_tid): Delete.
(current_inferior_ptid): New.
(debug_event_ptid): New.
(thread_rec): Take a ptid. Adjust.
(child_add_thread): Add `pid' argument. Adjust to use ptids.
(child_delete_thread): Ditto.
(do_initial_child_stuff): Add `attached' argument. Add process to
processes table.
(child_fetch_inferior_registers, child_store_inferior_registers):
Adjust.
(win32_create_inferior): Pass 0 to do_initial_child_stuff.
(win32_attach): Pass 1 to do_initial_child_stuff.
(win32_kill): Adjust interface. Remove process from processes
table.
(win32_detach): Ditto.
(win32_join): Adjust interface.
(win32_thread_alive): Take a ptid.
(win32_resume): Adjust to use ptids.
(get_child_debug_event): Ditto.
(win32_wait): Adjust interface. Remove exiting process from
processes table.
Pedro Alves [Wed, 1 Apr 2009 22:48:05 +0000 (22:48 +0000)]
Non-stop mode support.
* server.h (non_stop): Declare.
(gdb_client_data, handler_func): Declare.
(delete_file_handler, add_file_handler, start_event_loop):
Declare.
(handle_serial_event, handle_target_event, push_event)
(putpkt_notif): Declare.
* target.h (enum resume_kind): New.
(struct thread_resume): Replace `step' field by `kind' field.
(TARGET_WNOHANG): Define.
(struct target_ops) <wait>: Add `options' argument.
<supports_non_stop, async, start_non_stop>: New fields.
(target_supports_non_stop, target_async): New.
(start_non_stop): Declare.
(mywait): Add `options' argument.
* target.c (mywait): Add `options' argument. Print child exit
notifications here.
(start_non_stop): New.
* server.c (non_stop, own_buf, mem_buf): New globals.
(struct vstop_notif): New.
(notif_queue): New global.
(queue_stop_reply, push_event, discard_queued_stop_replies)
(send_next_stop_reply): New.
(start_inferior): Adjust to use resume_kind. Adjust to mywait
interface changes.
(attach_inferior): In non-stop mode, don't wait for the target
here.
(handle_general_set): Handle QNonStop.
(handle_query): When handling qC, return the current general
thread, instead of the first thread of the list.
(handle_query): If the backend supports non-stop mode, include
QNonStop+ in the qSupported query response.
(handle_v_cont): Adjust to use resume_kind. Handle resume_stop
and non-stop mode.
(handle_v_attach, handle_v_run): Handle non-stop mode.
(handle_v_stopped): New.
(handle_v_requests): Report support for vCont;t. Handle vStopped.
(myresume): Adjust to use resume_kind. Handle non-stop.
(queue_stop_reply_callback): New.
(handle_status): Handle non-stop mode.
(main): Clear non_stop flag on reconnection. Use the event-loop.
Refactor serial protocol handling from here ...
(process_serial_event): ... to this new function. When GDB
selects any thread, select one here. In non-stop mode, wait until
GDB acks all pending events before exiting.
(handle_serial_event, handle_target_event): New.
* remote-utils.c (remote_open): Install remote_desc in the event
loop.
(remote_close): Remove remote_desc from the event loop.
(putpkt_binary): Rename to...
(putpkt_binary_1): ... this. Add `is_notic' argument. Handle it.
(putpkt_binary): New as wrapper around putpkt_binary_1.
(putpkt_notif): New.
(prepare_resume_reply): In non-stop mode, don't change the
general_thread.
* event-loop.c: New.
* Makefile.in (OBJ): Add event-loop.o.
(event-loop.o): New rule.
* linux-low.h (pid_of): Moved here.
(lwpid_of): New.
(get_lwp_thread): Use lwpid_of.
(struct lwp_info): Delete `lwpid' field. Add `suspended' field.
* linux-low.c (pid_of): Delete.
(inferior_pid): Use lwpid_of.
(linux_event_pipe): New.
(target_is_async_p): New.
(delete_lwp): New.
(handle_extended_wait): Use lwpid_of.
(add_lwp): Don't set lwpid field.
(linux_attach_lwp): Adjust debug output. Use lwpid_of.
(linux_kill_one_lwp): If killing a running lwp, stop it first.
Use lwpid_of. Adjust to linux_wait_for_event interface changes.
(linux_detach_one_lwp): If detaching from a running lwp, stop it
first. Adjust to linux_wait_for_event interface changes. Use
lwpid_of.
(linux_detach): Don't delete the main lwp here.
(linux_join): Use my_waitpid. Avoid signal_pid. Use lwpid_of.
(status_pending_p): Don't consider explicitly suspended lwps.
(linux_wait_for_lwp): Take an integer pid instead of a lwp_info
pointer. Add OPTIONS argument. Change return type to int. Use
my_waitpid instead of sleeping. Handle WNOHANG. Use lwpid_of.
(linux_wait_for_event): Take an integer pid instead of a lwp_info
pointer. Add status pointer argument. Return a pid instead of a
status. Use lwpid_of. Adjust to linux_wait_for_lwp interface
changes. In non-stop mode, don't switch to a random thread.
(linux_wait): Rename to...
(linux_wait_1): ... this. Add target_options argument, and handle
it. Adjust to use resume_kind. Use lwpid_of. In non-stop mode,
don't handle the continue thread. Handle TARGET_WNOHANG. Merge
clean exit and signal exit code. Don't stop all threads in
non-stop mode. In all-stop mode, only stop all threads when
reporting a stop to GDB. Handle explicit thread stop requests.
(async_file_flush, async_file_mark): New.
(linux_wait): New.
(send_sigstop): Use lwpid_of.
(wait_for_sigstop): Use lwpid_of. Adjust to linux_wait_for_event
interface changes. In non-stop mode, don't switch to a random
thread.
(linux_resume_one_lwp): Use lwpid_of.
(linux_continue_one_thread, linux_queue_one_thread): Merge into ...
(linux_resume_one_thread): ... this. Handle resume_stop. In
non-stop mode, don't look for pending flag in all threads.
(resume_status_pending_p): Don't consider explicitly suspended
threads.
(my_waitpid): Reimplement. Emulate __WALL.
(linux_request_interrupt, linux_read_offsets, linux_xfer_siginfo):
Use lwpid_of.
(sigchld_handler, linux_supports_non_stop, linux_async)
(linux_start_non_stop): New.
(linux_target_ops): Register linux_supports_non_stop, linux_async
and linux_start_non_stop.
(initialize_low): Install SIGCHLD handler.
* thread-db.c (thread_db_create_event, find_one_thread)
(thread_db_get_tls_address): Use lwpid_of.
* win32-low.c (win32_detach): Adjust to use resume_kind.
(win32_wait): Add `options' argument.
* spu-low.c (spu_resume): Adjust to use resume_kind.
(spu_wait): Add `options' argument.
Pedro Alves [Wed, 1 Apr 2009 22:31:45 +0000 (22:31 +0000)]
Decouple target code from remote protocol.
* target.h (enum target_waitkind): New.
(struct target_waitstatus): New.
(struct target_ops) <wait>: Return an unsigned long. Take a
target_waitstatus pointer instead of a char pointer.
(mywait): Likewise.
* target.c (mywait): Change prototype to return an unsigned long.
Take a target_waitstatus pointer instead of a char pointer. Adjust.
* server.h (thread_from_wait, old_thread_from_wait): Delete
declarations.
(prepare_resume_reply): Change prototype to take a
target_waitstatus.
* server.c (thread_from_wait, old_thread_from_wait): Delete.
(last_status, last_ptid): New.
(start_inferior): Remove "statusptr" argument. Adjust. Return a
pid instead of a signal.
(attach_inferior): Remove "status" and "signal" parameters.
Adjust.
(handle_query): For qGetTLSAddr, parse the thread id with strtol,
not as an address.
(handle_v_cont, handle_v_attach, handle_v_run, handle_v_kill)
(handle_v_requests, myresume): Remove "status" and "signal"
parameters. Adjust.
(handle_status): New.
(main): Delete local `status'. Adjust.
* remote-utils.c: Include target.h.
(prepare_resume_reply): Change prototype to take a
target_waitstatus. Adjust.
* linux-low.c (linux_wait): Adjust to new target_ops->wait
interface.
* spu-low.c (spu_wait): Adjust.
* win32-low.c (enum target_waitkind, struct target_waitstatus):
Delete.
(win32_wait): Adjust.
Pedro Alves [Wed, 1 Apr 2009 22:29:33 +0000 (22:29 +0000)]
* target.h (struct thread_resume): Delete leave_stopped member.
(struct target_ops): Add a `n' argument to the `resume' callback.
* server.c (start_inferior): Adjust.
(handle_v_cont, myresume): Adjust.
* linux-low.c (check_removed_breakpoint): Adjust to resume
interface change, and to removed leave_stopped field.
(resume_ptr): Delete.
(struct thread_resume_array): New.
(linux_set_resume_request): Add new `arg' parameter. Adjust to
resume interface change.
(linux_continue_one_thread, linux_queue_one_thread)
(resume_status_pending_p): Check if the resume field is NULL
instead of checking the leave_stopped member.
(linux_resume): Adjust to the target resume interface change.
* spu-low.c (spu_resume): Adjust to the target resume interface
change.
* win32-low.c (win32_detach, win32_resume): Ditto.
Pedro Alves [Wed, 1 Apr 2009 22:25:44 +0000 (22:25 +0000)]
gdb/gdbserver/
* linux-low.c (linux_wait_for_event): Don't clear the `stepping'
flag.
(wait_for_sigstop): Don't leave a finished single-step SIGTRAP
pending.
(linux_continue_one_thread): Only preserve the stepping flag if
there's a pending breakpoint.
gdb/testsuite/
* gdb.threads/pending-step.c, gdb.threads/pending-step.exp: New.
Joel Brobecker [Wed, 1 Apr 2009 22:08:02 +0000 (22:08 +0000)]
* gdb.base/funcargs.exp: Set print frame-arguments to "all".
* gdb.base/call-ar-st.exp: Set print frame-arguments to "all".
* gdb.ada/ref_param.exp: Set print frame-arguments to "all".
* gdb.ada/lang_switch.exp: Set print frame-arguments to "all".
Joel Brobecker [Wed, 1 Apr 2009 22:05:29 +0000 (22:05 +0000)]
* stack.c (print_frame_arguments): Set initial value to "scalars".
Richard Sandiford [Wed, 1 Apr 2009 20:13:10 +0000 (20:13 +0000)]
bfd/
* xcofflink.c (xcoff_archive_info): Add contains_shared_object_p
and know_contains_shared_object_p.
(xcoff_archive_contains_shared_object_p): Add an "info" parameter.
Cache the result in the archive_info table.
(xcoff_auto_export_p): Add an "info" parameter and update the
call to xcoff_archive_contains_shared_object_p.
(xcoff_mark_auto_exports): Update accordingly.
(xcoff_post_gc_symbol): Likewise.
Richard Sandiford [Wed, 1 Apr 2009 20:09:02 +0000 (20:09 +0000)]
bfd/
* xcofflink.c (bfd_link_input_bfd): Treat __rtinit as C_HIDEXT
rather than C_EXT.
ld/testsuite/
* ld-powerpc/aix-gc-1.nd: New test.
* ld-powerpc/aix52.exp: Run it.
Richard Sandiford [Wed, 1 Apr 2009 20:04:28 +0000 (20:04 +0000)]
bfd/
* coff-rs6000.c (member_layout): New structure.
(archive_iterator): Likewise.
(member_layout_init): New function.
(archive_iterator_begin): Likewise.
(archive_iterator_next): Likewise.
(xcoff_write_armap_old): Use the new iterator functions.
(do_shared_object_padding): Delete.
(xcoff_write_armap_big): Use the new iterator functions. Simplify
handling of arch_info.
(xcoff_write_archive_contents_old): Allocate arelt_data in the
first loop rather than the second. Allocate a member header if
there isn't one, then work out the stat information and length
in the first loop too. Use the new iterators for the second loop.
(xcoff_write_archive_contents_big): Likewise.
Richard Sandiford [Wed, 1 Apr 2009 19:53:52 +0000 (19:53 +0000)]
bfd/
* bfd-in.h (bfd_xcoff_split_import_path): Declare.
(bfd_xcoff_set_archive_import_path): Likewise.
* bfd-in2.h: Regenerate.
* xcofflink.c: Include libiberty.h.
(xcoff_archive_info): New structure.
(xcoff_archive_info_hash): New function.
(xcoff_archive_info_eq): Likewise.
(xcoff_get_archive_info): Likewise.
(_bfd_xcoff_bfd_link_hash_table_create): Initialize archive_info.
(bfd_xcoff_split_import_path): New function.
(bfd_xcoff_set_archive_import_path): Likewise.
(xcoff_set_import_path): Move earlier in file.
(xcoff_link_add_dynamic_symbols): Set the import path of a non-archive
object to the the directory part of the bfd's filename. Get the
import path and filename of an archive object from the archive's
xcoff_tdata, initializing it if necessary. Update use of
import_file_id.
(bfd_link_input_bfd): Update use of import_file_id.
(xcoff_write_global_symbol): Likewise.
ld/
* emultempl/aix.em (gld${EMULATION_NAME}_open_dynamic_archive): New
function.
(ld_${EMULATION_NAME}_emulation): Use it.
Richard Sandiford [Wed, 1 Apr 2009 19:38:11 +0000 (19:38 +0000)]
include/coff/
* xcoff.h (xcoff_link_hash_table): Move to bfd/xcofflink.c.
bfd/
* xcofflink.c (xcoff_link_hash_table): Moved from include/coff/xcoff.h.
Richard Sandiford [Wed, 1 Apr 2009 19:27:37 +0000 (19:27 +0000)]
bfd/
* xcofflink.c (xcoff_link_create_extra_sections): Don't create
a .loader section for relocatable links.
(xcoff_need_ldrel_p): New function.
(xcoff_mark): Use it.
(bfd_xcoff_link_count_reloc): Only count loader relocs if there's
a loader section.
(xcoff_build_ldsym): New function, split out from...
(xcoff_build_ldsyms): ...here. Rename to...
(xcoff_post_gc_symbol): ...this. Only export symbols, and only
call xcoff_build_ldsym, if there's a loader section.
(xcoff_build_loader_section): New function, extracted verbatim from...
(bfd_xcoff_size_dynamic_sections): ...here. Only call it if
there's a loader section. Only add an __rtinit loader symbol
if there's a loader section. Update after above name change.
(xcoff_symbol_section, xcoff_create_ldrel): New functions.
(bfd_link_input_bfd): Use xcoff_need_ldrel_p, xcoff_symbol_section
and xcoff_create_ldrel.
(xcoff_write_global_symbol): Use xcoff_create_ldrel.
(xcoff_reloc_link_order): Likewise, but only call it if there's
a loader section. Use xcoff_symbol_section.
(_bfd_xcoff_bfd_final_link): Only use fdinfo.ldrel and fdinfo.ldsym
if there's a loader section.
ld/testsuite/
* ld-powerpc/aix-rel-1.s, ld-powerpc/aix-rel-1.od: New test.
* ld-powerpc/aix52.exp: Run it.
Aleksandar Ristovski [Wed, 1 Apr 2009 19:13:41 +0000 (19:13 +0000)]
* mips-tdep.c (mips_numeric_register_alieses): New definition.
(mips_gdbarch_init): Add user registers from
mips_numeric_register_aliases.
Joel Brobecker [Wed, 1 Apr 2009 19:07:50 +0000 (19:07 +0000)]
* linux-nat.c (linux_nat_filter_event): Minor comment reformatting.
Richard Sandiford [Wed, 1 Apr 2009 19:05:53 +0000 (19:05 +0000)]
bfd/
* xcofflink.c (bfd_link_input_bfd): Fix buffer overrun.
Joel Brobecker [Wed, 1 Apr 2009 18:56:29 +0000 (18:56 +0000)]
* linux-nat.c (linux_nat_filter_events): Do not delete the lwp if
this is the last one.
Pedro Alves [Wed, 1 Apr 2009 17:41:55 +0000 (17:41 +0000)]
* remote.c (append_resumption): New.
(remote_vcont_resume): Use it.
H.J. Lu [Wed, 1 Apr 2009 17:30:34 +0000 (17:30 +0000)]
2009-04-01 H.J. Lu <hongjiu.lu@intel.com>
* common.h (EM_INTEL178): Removed.
(EM_INTEL179): Likewise.
(EM_ETPU): New.
(EM_SLE9X): Likewise.
(EM_INTEL181): Likewise.
(EM_INTEL182): Likewise.
Joel Brobecker [Wed, 1 Apr 2009 16:35:40 +0000 (16:35 +0000)]
* windows-nat.c (+windows_get_ada_task_ptid): New function.
(init_windows_ops): Set windows_ops.to_get_ada_task_ptid.
clyon [Wed, 1 Apr 2009 15:45:13 +0000 (15:45 +0000)]
2009-04-01 Christophe Lyon <christophe.lyon@st.com>
opcodes/
* arm-dis.c (print_insn): Print BE8 opcodes in little endianness.
ld/testsuite/
* ld-arm/arm-elf.exp: BE8 tests expect the same output as the
default ones.
* ld-arm/arm-be8.d: Print opcodes in little endian.
* ld-arm/farcall-thumb-arm-be8.d: Removed useless expected result.
* ld-arm/farcall-arm-arm-be8.d: Likewise.
clyon [Wed, 1 Apr 2009 15:34:11 +0000 (15:34 +0000)]
2009-04-01 Christophe Lyon <christophe.lyon@st.com>
bfd/
* elf32-arm.c (group_sections): Rewrite loops for better
readability.
DJ Delorie [Wed, 1 Apr 2009 01:23:18 +0000 (01:23 +0000)]
merge from gcc
Alan Modra [Wed, 1 Apr 2009 00:00:04 +0000 (00:00 +0000)]
daily update
gdbadmin [Wed, 1 Apr 2009 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Pedro Alves [Tue, 31 Mar 2009 22:46:36 +0000 (22:46 +0000)]
* server.c (main): After the inferior having exited, call
remote_close before exiting gdbserver.
Paul Pluzhnikov [Tue, 31 Mar 2009 22:39:27 +0000 (22:39 +0000)]
[obvious] Kill left-over merge marker
H.J. Lu [Tue, 31 Mar 2009 21:19:02 +0000 (21:19 +0000)]
2009-03-31 H.J. Lu <hongjiu.lu@intel.com>
* common.h (EM_INTEL178): New.
(EM_INTEL179): Likewise.
(EM_INTEL180): Likewise.
Tom Tromey [Tue, 31 Mar 2009 20:20:58 +0000 (20:20 +0000)]
gdb
2009-03-31 Daniel Jacobowitz <dan@codesourcery.com>
Keith Seitz <keiths@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
PR gdb/6817
* Makefile.in (dbxread.o): Update.
* dbxread.c (read_dbx_symtab): Use cp_canonicalize_string.
* dwarf2read.c (GDB_FORM_cached_string): New.
(read_partial_die): Use dwarf2_canonicalize_name.
(dwarf2_linkage_name): Use dwarf2_name.
(dwarf2_canonicalize_name): New.
(dwarf2_name): Use dwarf2_canonicalize_name.
(dwarf_form_name, dump_die): Handle GDB_FORM_cached_string.
* stabsread.c (define_symbol, read_type): Use cp_canonicalize_string.
* symtab.c (lookup_symbol_in_language): Canonicalize input before
searching.
* cp-name-parser.y: operator() requires two parameters,
according to libiberty.
* minsyms.c (lookup_minimal_symbol): Canonicalize input
before searching.
* NEWS: Update.
gdb/testsuite
2009-03-31 Daniel Jacobowitz <dan@codesourcery.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
PR gdb/931
* gdb.cp/gdb1355.exp (f_li, f_lui, f_si, f_sui): Allow canonical
output.
* gdb.cp/templates.exp: Allow canonical output. Remove KFAILs
for gdb/931.
* dw2-strp.S (DW_AT_language): Change to C++.
(DW_TAG_variable (name ""), Abbrev code 7, .Lemptyname): New.
Joel Brobecker [Tue, 31 Mar 2009 16:51:01 +0000 (16:51 +0000)]
* gdb.texinfo (Ada Tasks): Add documentation about task-specific
breakpoints.
(Set Breaks): Add reference to thread-specific and task-specific
breakpoints.
Joel Brobecker [Tue, 31 Mar 2009 16:48:48 +0000 (16:48 +0000)]
* gdb.ada/tasks: New testcase.
Joel Brobecker [Tue, 31 Mar 2009 16:44:17 +0000 (16:44 +0000)]
Provide support for (Ada) task-specific breakpoints.
* ada-lang.h (ada_get_task_number): Add declaration.
(breakpoint_ada_task_match): Delete declaration.
* ada-tasks.c (ada_get_task_number): Make non-static.
* breakpoint.h (struct breakpoint): Add field "task".
* breakpoint.c (print_one_breakpoint_location): Add handling of
task-specific breakpoints.
(create_breakpoint, create_breakpoints, find_condition_and_thread):
New parameter "task".
(break_command_really): Update calls to find_condition_and_thread
and create_breakpoints.
(breakpoint_re_set_one): Update call to find_condition_and_thread.
Set b->task.
Joel Brobecker [Tue, 31 Mar 2009 16:33:35 +0000 (16:33 +0000)]
* gdb.texinfo (Ada Tasks): Remove the documentation about
the "Running" state, as this state has been eliminated.
Now all runnable tasks are shown as "Runnable".
Joel Brobecker [Tue, 31 Mar 2009 16:31:23 +0000 (16:31 +0000)]
* ada-tasks.c (short_task_info): Eliminate the "Running" task state.
Pedro Alves [Tue, 31 Mar 2009 15:23:54 +0000 (15:23 +0000)]
* remote.c (remote_notice_new_inferior): Use ptid_is_pid. Check
if the thread's ptid without a thread id field is in the list
before calling thread_change_ptid.
(extended_remote_attach_1): In non-stop mode, do not rely on
querying the current thread, instead, query the thread list, and
select the first thread of the process.
* gdbthread.h (first_thread_of_process): Declare.
* thread.c (first_thread_of_process): Define.
Stan Shebs [Tue, 31 Mar 2009 05:08:25 +0000 (05:08 +0000)]
2009-03-30 Stan Shebs <stan@codesourcery.com>
Make tracepoints into a type of breakpoint.
* breakpoint.h (enum bptype): Add bp_tracepoint.
(struct breakpoint): Add fields step_count, pass_count, actions.
(get_tracepoint, get_tracepoint_by_number): Declare.
(all_tracepoints): Declare.
* breakpoint.c: Include tracepoint.h, readline.h.
(ALL_TRACEPOINTS): Move here from tracepoint.c.
(tracepoint_count): Ditto.
(should_be_inserted): GDB does not insert tracepoints itself.
(print_it_typical): Add tracepoint case.
(bpstat_what): Ditto.
(print_one_breakpoint_location): Ditto, and add printing for
pass count, step count, and action list.
(user_settable_breakpoint): Add tracepoint case.
(allocate_bp_location): Ditto.
(set_breakpoint_location_function): Ditto.
(disable_breakpoints_in_shlibs): Ditto.
(mention): Ditto.
(break_command_really): Add argument traceflag, use to choose
basic breakpoint type.
(break_command_1): Pass extra argument.
(set_breakpoint, handle_gnu_v3_exceptions): Ditto.
(breakpoint_re_set_one): Add tracepoint case.
(disable_command, enable_command): Ditto.
(set_tracepoint_count): Move here from tracepoint.c.
(trace_command): Move here from tracepoint.c and use
break_command_really.
(tracepoints_info): Move here from tracepoint.c and call
breakpoints_info.
(enable_trace_command): Move here from tracepoint.c and call
enable_command.
(disable_trace_command): Move here from tracepoint.c and call
disable_command.
(delete_trace_command): Move here from tracepoint.c and call
delete_breakpoint.
(trace_pass_command): Move here from tracepoint.c.
(get_tracepoint_by_number): Ditto.
(tracepoint_save_command): Ditto.
(get_tracepoint): New function.
(all_tracepoints): New function.
(_initialize_breakpoint): Move tracepoint init from tracepoint.c,
deprecate "enable trace" and "disable trace" commands.
* tracepoint.h (struct tracepoint): Remove.
(tracepoint_chain): Remove decl.
(deprecated_create_tracepoint_hook): Remove decl.
(deprecated_delete_tracepoint_hook): Remove decl.
(deprecated_modify_tracepoint_hook): Remove decl.
(ALL_TRACEPOINTS, ALL_TRACEPOINTS_SAFE): Remove.
(free_actions): Update signature.
(validate_actionline): Update signature.
(end_actions_pseudocommand): Declare.
(while_stepping_pseudocommand): Declare.
* tracepoint.c: Include breakpoint.h.
(tracepoint_chain, tracepoint_count): Remove.
(free_actions, make_cleanup_free_actions): Update signature.
(trace_command, set_raw_tracepoint): Remove.
(trace_mention): Remove.
(tracepoints_info): Remove.
(tracepoint_operation, map_args_over_tracepoints): Remove.
(get_tracepoint_by_number): Remove.
(enable_trace_command, disable_trace_command): Remove.
(delete_trace_command, trace_pass_command): Remove.
(trace_actions_command, read_actions): Update signature.
(validate_actionline): Update signature, use bp loc.
(encode_actions): Ditto.
(download_tracepoint): New function, body of trace_start_command.
(trace_start_command): Call it, use all_tracepoints.
(tracepoint_save_command): Remove.
(tracepoint_dump_command): Use get_tracepoint.
(end_actions_pseudocommand): Make globally visible.
(while_stepping_pseudocommand): Ditto.
(_initialize_tracepoint): Move command definitions to breakpoint.c.
doc/
* gdb.texinfo (Tracepoints): Describe tracepoints as a
special case of breakpoints.
(Enable and Disable Tracepoints): Mention deprecation.
(Listing Tracepoints): Update description and example.
testsuite/
* gdb.trace/actions.exp: Update to match new info trace format.
* gdb.trace/deltrace.exp: Ditto.
* gdb.trace/infotrace.exp: Ditto.
* gdb.trace/passcount.exp: Ditto.
* gdb.trace/save-trace.exp: Ditto.
* gdb.trace/while-stepping.exp: Ditto.
* gdb.trace/tracecmd.exp: Ditto, plus don't allow pending option.
gdbtk/
* generic/gdbtk-bp.c (gdb_actions_command): Update to handle
tracepoints as breakpoints.
(gdb_get_tracepoint_info): Ditto, plus use get_tracepoint and
breakpoint locations.
(tracepoint_exists): Ditto, plus use all_tracepoints.
DJ Delorie [Tue, 31 Mar 2009 01:42:28 +0000 (01:42 +0000)]
* elflink.c (elf_link_input_bfd): Don't try to resolve complex
relocs when doing a relocatable link.
Alan Modra [Tue, 31 Mar 2009 00:00:09 +0000 (00:00 +0000)]
daily update
gdbadmin [Tue, 31 Mar 2009 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Thiago Jung Bauermann [Mon, 30 Mar 2009 19:54:19 +0000 (19:54 +0000)]
gdb/
Expose frames to Python.
* Makefile.in (SUBDIR_PYTHON_OBS): Add python-frame.o.
(SUBDIR_PYTHON_SRCS): Add python-frame.c.
(python-frame.o): New target.
* python/python-frame.c: New file.
* python/python-internal.h (gdbpy_frames, gdbpy_newest_frame,
gdbpy_frame_stop_reason_string, gdbpy_selected_frame,
gdbpy_initialize_frames): New prototypes.
* python/python.c (_initialize_python): Call gdbpy_initialize_frames.
(GdbMethods): Add `selected_frame' and `frame_stop_reason_string'
entries.
* stack.c (find_frame_funname): New function, factored out of
print_frame.
(print_frame): Call find_frame_funname.
* stack.h (find_frame_funname): Add prototype.
gdb/doc/
* gdb.texinfo (Frames in Python): New node.
(Python API): Update.
gdb/testsuite/
* gdb.python/python-frame.c: New file.
* gdb.python/python-frame.exp: New file.
Joseph Myers [Mon, 30 Mar 2009 14:41:28 +0000 (14:41 +0000)]
gas/testsuite:
* gas/arm/mapsecs.d, gas/arm/mapsecs.s: New.
opcodes:
* arm-dis.c (print_insn): Also check section matches in backwards
search for mapping symbol.
DJ Delorie [Mon, 30 Mar 2009 03:01:34 +0000 (03:01 +0000)]
merge from gcc
DJ Delorie [Mon, 30 Mar 2009 00:01:23 +0000 (00:01 +0000)]
merge from gcc
gdbadmin [Mon, 30 Mar 2009 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Mon, 30 Mar 2009 00:00:05 +0000 (00:00 +0000)]
daily update