target/nios2: Remove mmu_read_debug

This functionality can be had via plugins, if desired.
In the meantime, it is unused code.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Merge remote-tracking branch 'remotes/dgilbert-gitlab/tags/pull-migration-20220302b' into staging

Migration/HMP/Virtio pull 2022-03-02

A bit of a mix this time:
  * Minor fixes from myself, Hanna, and Jack
  * VNC password rework by Stefan and Fabian
  * Postcopy changes from Peter X that are
    the start of a larger series to come
  * Removing the prehistoic load_state_old
    code from Peter M

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# gpg: Signature made Wed 02 Mar 2022 18:25:12 GMT
# gpg:                using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A  9FA9 0516 331E BC5B FDE7

* remotes/dgilbert-gitlab/tags/pull-migration-20220302b:
  migration: Remove load_state_old and minimum_version_id_old
  tests: Pass in MigrateStart** into test_migrate_start()
  migration: Add migration_incoming_transport_cleanup()
  migration: postcopy_pause_fault_thread() never fails
  migration: Enlarge postcopy recovery to capture !-EIO too
  migration: Move static var in ram_block_from_stream() into global
  migration: Add postcopy_thread_create()
  migration: Dump ramblock and offset too when non-same-page detected
  migration: Introduce postcopy channels on dest node
  migration: Tracepoint change in postcopy-run bottom half
  migration: Finer grained tracepoints for POSTCOPY_LISTEN
  migration: Dump sub-cmd name in loadvm_process_command tp
  migration/rdma: set the REUSEADDR option for destination
  qapi/monitor: allow VNC display id in set/expire_password
  qapi/monitor: refactor set/expire_password with enums
  monitor/hmp: add support for flag argument with value
  virtiofsd: Let meson check for statx.stx_mnt_id
  clock-vmstate: Add missing END_OF_LIST

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

migration: Remove load_state_old and minimum_version_id_old

There are no longer any VMStateDescription structs in the tree which
use the load_state_old support for custom handling of incoming
migration from very old QEMU.  Remove the mechanism entirely.

This includes removing one stray useless setting of
minimum_version_id_old in a VMStateDescription with no load_state_old
function, which crept in after the global weeding-out of them in
commit 17e313406126.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220215175705.3846411-1-peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

tests: Pass in MigrateStart** into test_migrate_start()

test_migrate_start() will release the MigrateStart structure that passed
in, however that's not super clear to the caller because after the call
returned the pointer can still be referenced by the callers.  It can easily
be a source of use-after-free.

Let's pass in a double pointer of that, then we can safely clear the
pointer for the caller after the struct is released.

Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220301083925.33483-26-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
  dgilbert: Fixup apply since I didn't take 24/25

migration: Add migration_incoming_transport_cleanup()

Add a helper to cleanup the transport listener.

When do it, we should also null-ify the cleanup hook and the data, then it's
even safe to call it multiple times.

Move the socket_address_list cleanup altogether, because that's a mirror of the
listener channels and only for the purpose of query-migrate.  Hence when
someone wants to cleanup the listener transport, it should also want to cleanup
the socket list too, always.

No functional change intended.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220301083925.33483-15-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

migration: postcopy_pause_fault_thread() never fails

Per the title, remove the return code and simplify the callers as the errors
will never be triggered.  No functional change intended.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220301083925.33483-12-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

migration: Enlarge postcopy recovery to capture !-EIO too

We used to have quite a few places making sure -EIO happened and that's the
only way to trigger postcopy recovery.  That's based on the assumption that
we'll only return -EIO for channel issues.

It'll work in 99.99% cases but logically that won't cover some corner cases.
One example is e.g. ram_block_from_stream() could fail with an interrupted
network, then -EINVAL will be returned instead of -EIO.

I remembered Dave Gilbert pointed that out before, but somehow this is
overlooked.  Neither did I encounter anything outside the -EIO error.

However we'd better touch that up before it triggers a rare VM data loss during
live migrating.

To cover as much those cases as possible, remove the -EIO restriction on
triggering the postcopy recovery, because even if it's not a channel failure,
we can't do anything better than halting QEMU anyway - the corpse of the
process may even be used by a good hand to dig out useful memory regions, or
the admin could simply kill the process later on.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220301083925.33483-11-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

migration: Move static var in ram_block_from_stream() into global

Static variable is very unfriendly to threading of ram_block_from_stream().
Move it into MigrationIncomingState.

Make the incoming state pointer to be passed over to ram_block_from_stream() on
both caller sites.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220301083925.33483-8-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

migration: Add postcopy_thread_create()

Postcopy create threads. A common manner is we init a sem and use it to sync
with the thread.  Namely, we have fault_thread_sem and listen_thread_sem and
they're only used for this.

Make it a shared infrastructure so it's easier to create yet another thread.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220301083925.33483-7-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

migration: Dump ramblock and offset too when non-same-page detected

In ram_load_postcopy() we'll try to detect non-same-page case and dump error.
This error is very helpful for debugging.  Adding ramblock & offset into the
error log too.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220301083925.33483-6-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
  dgilbert: Fix up long line

migration: Introduce postcopy channels on dest node

Postcopy handles huge pages in a special way that currently we can only have
one "channel" to transfer the page.

It's because when we install pages using UFFDIO_COPY, we need to have the whole
huge page ready, it also means we need to have a temp huge page when trying to
receive the whole content of the page.

Currently all maintainance around this tmp page is global: firstly we'll
allocate a temp huge page, then we maintain its status mostly within
ram_load_postcopy().

To enable multiple channels for postcopy, the first thing we need to do is to
prepare N temp huge pages as caching, one for each channel.

Meanwhile we need to maintain the tmp huge page status per-channel too.

To give some example, some local variables maintained in ram_load_postcopy()
are listed; they are responsible for maintaining temp huge page status:

  - all_zero:     this keeps whether this huge page contains all zeros
  - target_pages: this counts how many target pages have been copied
  - host_page:    this keeps the host ptr for the page to install

Move all these fields to be together with the temp huge pages to form a new
structure called PostcopyTmpPage.  Then for each (future) postcopy channel, we
need one structure to keep the state around.

For vanilla postcopy, obviously there's only one channel.  It contains both
precopy and postcopy pages.

This patch teaches the dest migration node to start realize the possible number
of postcopy channels by introducing the "postcopy_channels" variable.  Its
value is calculated when setup postcopy on dest node (during POSTCOPY_LISTEN
phase).

Vanilla postcopy will have channels=1, but when postcopy-preempt capability is
enabled (in the future), we will boost it to 2 because even during partial
sending of a precopy huge page we still want to preempt it and start sending
the postcopy requested page right away (so we start to keep two temp huge
pages; more if we want to enable multifd).  In this patch there's a TODO marked
for that; so far the channels is always set to 1.

We need to send one "host huge page" on one channel only and we cannot split
them, because otherwise the data upon the same huge page can locate on more
than one channel so we need more complicated logic to manage.  One temp host
huge page for each channel will be enough for us for now.

Postcopy will still always use the index=0 huge page even after this patch.
However it prepares for the latter patches where it can start to use multiple
channels (which needs src intervention, because only src knows which channel we
should use).

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220301083925.33483-5-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
  dgilbert: Fixed up long line

migration: Tracepoint change in postcopy-run bottom half

Remove the old two tracepoints and they're even near each other:

    trace_loadvm_postcopy_handle_run_cpu_sync()
    trace_loadvm_postcopy_handle_run_vmstart()

Add trace_loadvm_postcopy_handle_run_bh() with a finer granule trace.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220301083925.33483-4-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

migration: Finer grained tracepoints for POSTCOPY_LISTEN

The enablement of postcopy listening has a few steps, add a few tracepoints to
be there ready for some basic measurements for them.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220301083925.33483-3-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

migration: Dump sub-cmd name in loadvm_process_command tp

It'll be easier to read the name rather than index of sub-cmd when debugging.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220301083925.33483-2-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

migration/rdma: set the REUSEADDR option for destination

We hit following error during testing RDMA transport:
in case of migration error, mgmt daemon pick one migration port,
incoming rdma:[::]:8089: RDMA ERROR: Error: could not rdma_bind_addr

Then try another -incoming rdma:[::]:8103, sometime it worked,
sometimes need another try with other ports number.

Set the REUSEADDR option for destination, This allow address could
be reused to avoid rdma_bind_addr error out.

Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Message-Id: <20220208085640.19702-1-jinpu.wang@ionos.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
  dgilbert: Fixed up some tabs

qapi/monitor: allow VNC display id in set/expire_password

It is possible to specify more than one VNC server on the command line,
either with an explicit ID or the auto-generated ones à la "default",
"vnc2", "vnc3", ...

It is not possible to change the password on one of these extra VNC
displays though. Fix this by adding a "display" parameter to the
"set_password" and "expire_password" QMP and HMP commands.

For HMP, the display is specified using the "-d" value flag.

For QMP, the schema is updated to explicitly express the supported
variants of the commands with protocol-discriminated unions.

Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
[FE: update "Since: " from 6.2 to 7.0
     make @connected a common member of @SetPasswordOptions]
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Message-Id: <20220225084949.35746-4-f.ebner@proxmox.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

qapi/monitor: refactor set/expire_password with enums

'protocol' and 'connected' are better suited as enums than as strings,
make use of that. No functional change intended.

Suggested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
[FE: update "Since: " from 6.2 to 7.0
     put 'keep' first in enum to ease use as a default]
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Message-Id: <20220225084949.35746-3-f.ebner@proxmox.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

monitor/hmp: add support for flag argument with value

Adds support for the "-xs" parameter type, where "-x" denotes a flag
name and the "s" suffix indicates that this flag is supposed to take
an arbitrary string parameter.

These parameters are always optional, the entry in the qdict will be
omitted if the flag is not given.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
[FE: fixed typo pointed out by Eric Blake
     use s instead of V to indicate string parameter]
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Message-Id: <20220225084949.35746-2-f.ebner@proxmox.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

virtiofsd: Let meson check for statx.stx_mnt_id

In virtiofsd, we assume that the presence of the STATX_MNT_ID macro
implies existence of the statx.stx_mnt_id field.  Unfortunately, that is
not necessarily the case: glibc has introduced the macro in its commit
88a2cf6c4bab6e94a65e9c0db8813709372e9180, but the statx.stx_mnt_id field
is still missing from its own headers.

Let meson.build actually chek for both STATX_MNT_ID and
statx.stx_mnt_id, and set CONFIG_STATX_MNT_ID if both are present.
Then, use this config macro in virtiofsd.

Closes: https://gitlab.com/qemu-project/qemu/-/issues/882
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220223092340.9043-1-hreitz@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

clock-vmstate: Add missing END_OF_LIST

Add the missing VMSTATE_END_OF_LIST to vmstate_muldiv

Fixes: 99abcbc7600 ("clock: Provide builtin multiplier/divider")
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20220111101934.115028-1-dgilbert@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Cc: qemu-stable@nongnu.org
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

Merge remote-tracking branch 'remotes/legoater/tags/pull-ppc-20220302' into staging

ppc-7.0 queue

* ppc/pnv fixes
* PMU EBB support
* target/ppc: PowerISA Vector/VSX instruction batch
* ppc/pnv: Extension of the powernv10 machine with XIVE2 ans PHB5 models
* spapr allocation cleanups

# gpg: Signature made Wed 02 Mar 2022 11:00:42 GMT
# gpg:                using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B  0B60 51A3 43C7 CFFB ECA1

* remotes/legoater/tags/pull-ppc-20220302: (87 commits)
  hw/ppc/spapr_vio.c: use g_autofree in spapr_dt_vdevice()
  hw/ppc/spapr_rtas.c: use g_autofree in rtas_ibm_get_system_parameter()
  spapr_pci_nvlink2.c: use g_autofree in spapr_phb_nvgpu_ram_populate_dt()
  hw/ppc/spapr_numa.c: simplify spapr_numa_write_assoc_lookup_arrays()
  hw/ppc/spapr_drc.c: use g_autofree in spapr_drc_by_index()
  hw/ppc/spapr_drc.c: use g_autofree in spapr_dr_connector_new()
  hw/ppc/spapr_drc.c: use g_autofree in drc_unrealize()
  hw/ppc/spapr_drc.c: use g_autofree in drc_realize()
  hw/ppc/spapr_drc.c: use g_auto in spapr_dt_drc()
  hw/ppc/spapr_caps.c: use g_autofree in spapr_caps_add_properties()
  hw/ppc/spapr_caps.c: use g_autofree in spapr_cap_get_string()
  hw/ppc/spapr_caps.c: use g_autofree in spapr_cap_set_string()
  hw/ppc/spapr.c: fail early if no firmware found in machine_init()
  hw/ppc/spapr.c: use g_autofree in spapr_dt_chosen()
  pnv/xive2: Add support for 8bits thread id
  pnv/xive2: Add support for automatic save&restore
  xive2: Add a get_config() handler for the router configuration
  pnv/xive2: Add support XIVE2 P9-compat mode (or Gen1)
  ppc/pnv: add XIVE Gen2 TIMA support
  pnv/xive2: Introduce new capability bits
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-semihosting-280222-1' into staging

Testing and semihosting updates:

  - restore TESTS/IMAGES filtering to docker tests
  - add NOUSER to alpine image
  - bump lcitool version
  - move arm64/s390x cross build images to lcitool
  - add aarch32 runner CI scripts
  - expand testing to more vectors
  - update s390x jobs to focal for gitlab/travis
  - disable threadcount for all sh4
  - fix semihosting SYS_HEAPINFO and test

# gpg: Signature made Mon 28 Feb 2022 18:46:41 GMT
# gpg:                using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8  DF35 FBD0 DB09 5A9E 2A44

* remotes/stsquad/tags/pull-testing-and-semihosting-280222-1:
  tests/tcg: port SYS_HEAPINFO to a system test
  semihosting/arm-compat: replace heuristic for softmmu SYS_HEAPINFO
  tests/tcg: completely disable threadcount for sh4
  gitlab: upgrade the job definition for s390x to 20.04
  travis.yml: Update the s390x jobs to Ubuntu Focal
  tests/tcg: add vectorised sha512 versions
  tests/tcg: add sha512 test
  tests/tcg: build sha1-vector with O3 and compare
  tests/tcg/ppc64: clean-up handling of byte-reverse
  gitlab: add a new aarch32 custom runner definition
  scripts/ci: allow for a secondary runner
  scripts/ci: add build env rules for aarch32 on aarch64
  tests/docker: introduce debian-riscv64-test-cross
  tests/docker: update debian-s390x-cross with lcitool
  tests/docker: update debian-arm64-cross with lcitool
  tests/lcitool: update to latest version
  tests/docker: add NOUSER for alpine image
  tests/docker: restore TESTS/IMAGES filtering

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/ppc/spapr_vio.c: use g_autofree in spapr_dt_vdevice()

And return the result of g_strdup_printf() directly instead of using the
'path' var.

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220228175004.8862-15-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/ppc/spapr_rtas.c: use g_autofree in rtas_ibm_get_system_parameter()

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220228175004.8862-14-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

spapr_pci_nvlink2.c: use g_autofree in spapr_phb_nvgpu_ram_populate_dt()

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220228175004.8862-13-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/ppc/spapr_numa.c: simplify spapr_numa_write_assoc_lookup_arrays()

We can get the job done in spapr_numa_write_assoc_lookup_arrays() a bit
cleaner:

- 'cur_index = int_buf = g_malloc0(..)' is doing a g_malloc0() in the
'int_buf' pointer and making 'cur_index' point to 'int_buf' all in a
single line. No problem with that, but splitting into 2 lines is clearer
to follow

- use g_autofree in 'int_buf' to avoid a g_free() call later on

- 'buf_len' is only being used to store the size of 'int_buf' malloc.
Remove the var and just use the value in g_malloc0() directly

- remove the 'ret' var and just return the result of fdt_setprop()

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220228175004.8862-12-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/ppc/spapr_drc.c: use g_autofree in spapr_drc_by_index()

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220228175004.8862-11-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/ppc/spapr_drc.c: use g_autofree in spapr_dr_connector_new()

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220228175004.8862-10-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/ppc/spapr_drc.c: use g_autofree in drc_unrealize()

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220228175004.8862-9-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/ppc/spapr_drc.c: use g_autofree in drc_realize()

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220228175004.8862-8-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/ppc/spapr_drc.c: use g_auto in spapr_dt_drc()

Use g_autoptr() with GArray* and GString* pointers to avoid calling
g_free() and the need for the 'out' label.

'drc_name' can also be g_autofreed to avoid a g_free() call at the end
of the while() loop.

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220228175004.8862-7-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/ppc/spapr_caps.c: use g_autofree in spapr_caps_add_properties()

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220228175004.8862-6-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/ppc/spapr_caps.c: use g_autofree in spapr_cap_get_string()

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220228175004.8862-5-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/ppc/spapr_caps.c: use g_autofree in spapr_cap_set_string()

And get rid of the 'out' label since it's now unused.

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220228175004.8862-4-danielhb413@gmail.com>
[ clg: Fixed typo in commit log ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/ppc/spapr.c: fail early if no firmware found in machine_init()

The firmware check consists on a file search (qemu_find_file) and load
it via load_imag_targphys(). This validation is not dependent on any
other machine state but it currently being done at the end of
spapr_machine_init(). This means that we can do a lot of stuff and end
up failing at the end for something that we can verify right out of the
gate.

Move this validation to the start of spapr_machine_init() to fail
earlier.  While we're at it, use g_autofree in the 'filename' pointer.

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220228175004.8862-3-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

hw/ppc/spapr.c: use g_autofree in spapr_dt_chosen()

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220228175004.8862-2-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

pnv/xive2: Add support for 8bits thread id

Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

pnv/xive2: Add support for automatic save&restore

The XIVE interrupt controller on P10 can automatically save and
restore the state of the interrupt registers under the internal NVP
structure representing the VCPU. This saves a costly store/load in
guest entries and exits.

Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

xive2: Add a get_config() handler for the router configuration

Add GEN1 config even if we don't use it yet in the core framework.

Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

pnv/xive2: Add support XIVE2 P9-compat mode (or Gen1)

The thread interrupt management area (TIMA) is a set of pages mapped
in the Hypervisor and in the guest OS address space giving access to
the interrupt thread context registers for interrupt management, ACK,
EOI, CPPR, etc.

XIVE2 changes slightly the TIMA layout with extra bits for the new
features, larger CAM lines and the controller provides configuration
switches for backward compatibility. This is called the XIVE2
P9-compat mode, of Gen1 TIMA. It impacts the layout of the TIMA and
the availability of the internal features associated with it,
Automatic Save & Restore for instance. Using a P9 layout also means
setting the controller in such a mode at init time.

As the OPAL driver initializes the XIVE2 controller with a XIVE2/P10
TIMA directly, the XIVE2 model only has a simple support for the
compat mode in the OS TIMA.

Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

ppc/pnv: add XIVE Gen2 TIMA support

Only the CAM line updates done by the hypervisor are specific to
POWER10. Instead of duplicating the TM ops table, we handle these
commands locally under the PowerNV XIVE2 model.

Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

pnv/xive2: Introduce new capability bits

These bits control the availability of interrupt features : StoreEOI,
PHB PQ_disable, PHB Address-Based Trigger and the overall XIVE
exploitation mode. These bits can be set at early boot time of the
system to activate/deactivate a feature for testing purposes. The
default value should be '1'.

The 'XIVE exploitation mode' bit is a software bit that skiboot could
use to disable the XIVE OS interface and propose a P8 style XICS
interface instead. There are no plans for that for the moment.

Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

ppc/pnv: Add support for PHB5 "Address-based trigger" mode

When the Address-Based Interrupt Trigger mode is activated, the PHB
maps the interrupt source number into the interrupt command address.
The PHB directly triggers the IC ESB page of the interrupt number and
not the notify page of the IC anymore.

Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

ppc/pnv: Add support for PQ offload on PHB5

The PQ_disable configuration bit disables the check done on the PQ
state bits when processing new MSI interrupts. When bit 9 is enabled,
the PHB forwards any MSI trigger to the XIVE interrupt controller
without checking the PQ state bits. The XIVE IC knows from the trigger
message that the PQ bits have not been checked and performs the check
locally.

This configuration bit only applies to MSIs and LSIs are still checked
on the PHB to handle the assertion level.

PQ_disable enablement is a requirement for StoreEOI.

Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

ppc/xive: Add support for PQ state bits offload

The trigger message coming from a HW source contains a special bit
informing the XIVE interrupt controller that the PQ bits have been
checked at the source or not. Depending on the value, the IC can
perform the check and the state transition locally using its own PQ
state bits.

The following changes add new accessors to the XiveRouter required to
query and update the PQ state bits. This only applies to the PowerNV
machine. sPAPR accessors are provided but the pSeries machine should
not be concerned by such complex configuration for the moment.

Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

ppc/xive2: Add support for notification injection on ESB pages

This is an internal offset used to inject triggers when the PQ state
bits are not controlled locally. Such as for LSIs when the PHB5 are
using the Address-Based Interrupt Trigger mode and on the END.

Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

ppc/psi: Add support for StoreEOI and 64k ESB pages (POWER10)

POWER10 adds support for StoreEOI operation and 64K ESB pages on PSIHB
to be consistent with the other interrupt sources of the system.

Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

ppc/pnv: Add a HOMER model to POWER10

Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

ppc/pnv: Add model for POWER10 PHB5 PCIe Host bridge

PHB4 and PHB5 are very similar. Use the PHB4 models with some minor
adjustements in a subclass for P10.

Signed-off-by: Cédric Le Goater <clg@kaod.org>

ppc/pnv: Add POWER10 quads

and use a pnv_chip_power10_quad_realize() helper to avoid code
duplication with P9. This still needs some refinements on the XSCOM
registers handling in PnvQuad.

Signed-off-by: Cédric Le Goater <clg@kaod.org>

ppc/pnv: Add a OCC model for POWER10

Our OCC model is very mininal and POWER10 can simply reuse the OCC
model we introduced for POWER9.

Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

ppc/pnv: Add a XIVE2 controller to the POWER10 chip

The XIVE2 interrupt controller of the POWER10 processor follows the
same logic than on POWER9 but the HW interface has been largely
reviewed.  It has a new register interface, different BARs, extra
VSDs, new layout for the XIVE2 structures, and a set of new features
which are described below.

This is a model of the POWER10 XIVE2 interrupt controller for the
PowerNV machine. It focuses primarily on the needs of the skiboot
firmware but some initial hypervisor support is implemented for KVM
use (escalation).

Support for new features will be implemented in time and will require
new support from the OS.

* XIVE2 BARS

The interrupt controller BARs have a different layout outlined below.
Each sub-engine has now own its range and the indirect TIMA access was
replaced with a set of pages, one per CPU, under the IC BAR:

  - IC BAR (Interrupt Controller)
    . 4 pages, one per sub-engine
    . 128 indirect TIMA pages
  - TM BAR (Thread Interrupt Management Area)
    . 4 pages
  - ESB BAR (ESB pages for IPIs)
    . up to 1TB
  - END BAR (ESB pages for ENDs)
    . up to 2TB
  - NVC BAR (Notification Virtual Crowd)
    . up to 128
  - NVPG BAR (Notification Virtual Process and Group)
    . up to 1TB
  - Direct mapped Thread Context Area (reads & writes)

OPAL does not use the grouping and crowd capability.

* Virtual Structure Tables

XIVE2 adds new tables types and also changes the field layout of the END
and NVP Virtualization Structure Descriptors.

  - EAS
  - END new layout
  - NVT was splitted in :
    . NVP (Processor), 32B
    . NVG (Group), 32B
    . NVC (Crowd == P9 block group) 32B
  - IC for remote configuration
  - SYNC for cache injection
  - ERQ for event input queue

The setup is slighly different on XIVE2 because the indexing has changed
for some of the tables, block ID or the chip topology ID can be used.

* XIVE2 features

SCOM and MMIO registers have a new layout and XIVE2 adds a new global
capability and configuration registers.

The lowlevel hardware offers a set of new features among which :

  - a configurable number of priorities : 1 - 8
  - StoreEOI with load-after-store ordering is activated by default
  - Gen2 TIMA layout
  - A P9-compat mode, or Gen1, TIMA toggle bit for SW compatibility
  - increase to 24bit for VP number

Other features will have some impact on the Hypervisor and guest OS
when activated, but this is not required for initial support of the
controller.

Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

ppc/xive2: Introduce a presenter matching routine

The VP space is larger in XIVE2 (P10), 24 bits instead of 19bits on
XIVE (P9), and the CAM line can use a 7bits or 8bits thread id.

For now, we only use 7bits thread ids, same as P9, but because of the
change of the size of the VP space, the CAM matching routine is
different between P9 and P10. It is easier to duplicate the whole
routine than to add extra handlers in xive_presenter_tctx_match() used
for P9.

We might come with a better solution later on, after we have added
some more support for the XIVE2 controller.

Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

ppc/xive2: Introduce a XIVE2 core framework

The XIVE2 interrupt controller of the POWER10 processor as the same
logic as on POWER9 but its SW interface has been largely reworked. The
interrupt controller has a new register interface, different BARs,
extra VSDs. These will be described when we add the device model for
the baremetal machine.

The XIVE internal structures for the EAS, END, NVT have different
layouts which is a problem for the current core XIVE framework. To
avoid adding too much complexity in the XIVE models, a new XIVE2 core
framework is introduced. It duplicates the models which are closely
linked to the XIVE internal structures : Xive2Router and
Xive2ENDSource and reuses the XiveSource, XivePresenter, XiveTCTX
models, as they are more generic.

Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: implement lxvr[bhwd]/stxvr[bhwd]x

Implement the following PowerISA v3.1 instuctions:
lxvrbx: Load VSX Vector Rightmost Byte Indexed X-form
lxvrhx: Load VSX Vector Rightmost Halfword Indexed X-form
lxvrwx: Load VSX Vector Rightmost Word Indexed X-form
lxvrdx: Load VSX Vector Rightmost Doubleword Indexed X-form

stxvrbx: Store VSX Vector Rightmost Byte Indexed X-form
stxvrhx: Store VSX Vector Rightmost Halfword Indexed X-form
stxvrwx: Store VSX Vector Rightmost Word Indexed X-form
stxvrdx: Store VSX Vector Rightmost Doubleword Indexed X-form

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Lucas Coutinho <lucas.coutinho@eldorado.org.br>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-50-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: implement plxssp/pstxssp

Implement instructions plxssp/pstxssp and port lxssp/stxssp to
decode tree.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Leandro Lupori <leandro.lupori@eldorado.org.br>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-49-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: implement plxsd/pstxsd

Implement instructions plxsd/pstxsd and port lxsd/stxsd to decode
tree.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Leandro Lupori <leandro.lupori@eldorado.org.br>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-48-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: Implement xvcvbf16spn and xvcvspbf16 instructions

Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225210936.1749575-47-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: Implement xs{max,min}cqp

Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-46-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: Refactor VSX_MAX_MINC helper

Refactor xs{max,min}cdp VSX_MAX_MINC helper to prepare for
xs{max,min}cqp implementation.

Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-45-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: Move xs{max, min}[cj]dp to use do_helper_XX3

Also, fixes these instructions not being capitalized.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-44-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: Move xscmp{eq,ge,gt}dp to decodetree

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-43-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: Implement xscmp{eq,ge,gt}qp

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-42-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: Refactor VSX_SCALAR_CMP_DP

Refactor VSX_SCALAR_CMP_DP, changing its name to VSX_SCALAR_CMP and
prepare the helper to be used for quadword comparisons.

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225210936.1749575-41-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: Remove xscmpnedp instruction

xscmpnedp was added in ISA v3.0 but removed in v3.0B. This patch
removes this instruction as it was not in the final version of v3.0.

Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Acked-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-40-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: Implement xvtlsbb instruction

Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-39-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: implement xs[n]maddqp[o]/xs[n]msubqp[o]

Implement the following PowerISA v3.0 instuctions:
xsmaddqp[o]: VSX Scalar Multiply-Add Quad-Precision [using round to Odd]
xsmsubqp[o]: VSX Scalar Multiply-Subtract Quad-Precision [using round
             to Odd]
xsnmaddqp[o]: VSX Scalar Negative Multiply-Add Quad-Precision [using
              round to Odd]
xsnmsubqp[o]: VSX Scalar Negative Multiply-Subtract Quad-Precision
              [using round to Odd]

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-38-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: move xs[n]madd[am][ds]p/xs[n]msub[am][ds]p to decodetree

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-37-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: Implement xxgenpcv[bhwd]m instruction

Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225210936.1749575-36-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: Implement xxeval

Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225210936.1749575-35-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

tcg/tcg-op-gvec.c: Introduce tcg_gen_gvec_4i

Following the implementation of tcg_gen_gvec_3i, add a four-vector and
immediate operand expansion method.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-34-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: Implement xxpermx instruction

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-33-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: Move xxpermdi to decodetree

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-32-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: move xxperm/xxpermr to decodetree

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-31-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: Move xxsel to decodetree

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-30-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: Move vsel and vperm/vpermr to decodetree

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-29-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: implement vrlqmi

Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225210936.1749575-28-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: implement vrlqnm

Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225210936.1749575-27-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: implement vrlq

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-26-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: move vrl[bhwd]nm/vrl[bhwd]mi to decodetree

Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225210936.1749575-25-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: move vrl[bhwd] to decodetree

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-24-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: implement vsraq

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-23-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: implement vsrq

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-22-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: implement vslq

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-21-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: move vs[lr][a][bhwd] to decodetree

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-20-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: implement vgnb

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-19-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: implement vcntmb[bhwd]

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-18-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: implement vclrrb

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-17-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: implement vclrlb

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-16-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: implement vstri[bh][lr]

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-15-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: Implement Vector Compare Quadword

Implement the following PowerISA v3.1 instructions:
vcmpsq: Vector Compare Signed Quadword
vcmpuq: Vector Compare Unsigned Quadword

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-14-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: Implement Vector Compare Greater Than Quadword

Implement the following PowerISA v3.1 instructions:
vcmpgtsq: Vector Compare Greater Than Signed Quadword
vcmpgtuq: Vector Compare Greater Than Unsigned Quadword

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-13-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: Implement Vector Compare Equal Quadword

Implement the following PowerISA v3.1 instructions:
vcmpequq: Vector Compare Equal Quadword

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-12-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: Move Vector Compare Not Equal or Zero to decodetree

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-11-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: Move Vector Compare Equal/Not Equal/Greater Than to decodetree

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-10-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: Implement vextsd2q

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Lucas Coutinho <lucas.coutinho@eldorado.org.br>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-9-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: Move vexts[bhw]2[wd] to decodetree

Move the following instructions to decodetree:
vextsb2w: Vector Extend Sign Byte To Word
vextsh2w: Vector Extend Sign Halfword To Word
vextsb2d: Vector Extend Sign Byte To Doubleword
vextsh2d: Vector Extend Sign Halfword To Doubleword
vextsw2d: Vector Extend Sign Word To Doubleword

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Lucas Coutinho <lucas.coutinho@eldorado.org.br>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-8-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: Implement vmsumudm instruction

Based on [1] by Lijun Pan <ljp@linux.ibm.com>, which was never merged
into master.

[1]: https://lists.gnu.org/archive/html/qemu-ppc/2020-07/msg00419.html

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-7-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: Implement vmsumcud instruction

Based on [1] by Lijun Pan <ljp@linux.ibm.com>, which was never merged
into master.

[1]: https://lists.gnu.org/archive/html/qemu-ppc/2020-07/msg00419.html

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-6-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

target/ppc: vmulh* instructions without helpers

Changed vmulhuw, vmulhud, vmulhsw, vmulhsd to not
use helpers.

Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225210936.1749575-5-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>