OSDN Git Service
Filipe Manana [Wed, 26 Jul 2023 15:57:02 +0000 (16:57 +0100)]
btrfs: print available space across all block groups when dumping space info
When dumping a space info also sum the available space for all block
groups and then print it. This often useful for debugging -ENOSPC
related problems.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Wed, 26 Jul 2023 15:57:01 +0000 (16:57 +0100)]
btrfs: print available space for a block group when dumping a space info
When dumping a space info, we iterate over all its block groups and then
print their size and the amounts of bytes used, reserved, pinned, etc.
When debugging -ENOSPC problems it's also useful to know how much space
is available (free), so calculate that and print it as well.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Wed, 26 Jul 2023 15:57:00 +0000 (16:57 +0100)]
btrfs: print block group super and delalloc bytes when dumping space info
When dumping a space info's block groups, also print the number of bytes
used for super blocks and delalloc. This is often useful for debugging
-ENOSPC problems.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Wed, 26 Jul 2023 15:56:59 +0000 (16:56 +0100)]
btrfs: print target number of bytes when dumping free space
When dumping free space, with btrfs_dump_free_space(), we pass a bytes
argument in order to count how many free space entries in the block group
have a size greater than or equal to that number of bytes. We then print
how many suitable entries we found, but we don't print the target number
of bytes, we just say "bytes". Change the message to actually print the
number of bytes, which makes debugging -ENOSPC issues a bit easier.
Also sligthly change the odd grammar and terminology: the sentence is
ending with 'is', which doesn't make sense, and the term 'blocks' is
confusing as we are referring to free space entries within the block
group's free space cache.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Wed, 26 Jul 2023 15:56:58 +0000 (16:56 +0100)]
btrfs: update comment for btrfs_join_transaction_nostart()
Update the comment for btrfs_join_transaction_nostart() to be more clear
about how it works and how it's different from btrfs_attach_transaction().
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Wed, 26 Jul 2023 15:56:57 +0000 (16:56 +0100)]
btrfs: don't start transaction when joining with TRANS_JOIN_NOSTART
When joining a transaction with TRANS_JOIN_NOSTART, if we don't find a
running transaction we end up creating one. This goes against the purpose
of TRANS_JOIN_NOSTART which is to join a running transaction if its state
is at or below the state TRANS_STATE_COMMIT_START, otherwise return an
-ENOENT error and don't start a new transaction. So fix this to not create
a new transaction if there's no running transaction at or below that
state.
CC: stable@vger.kernel.org # 4.14+
Fixes:
a6d155d2e363 ("Btrfs: fix deadlock between fiemap and transaction commits")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Sat, 15 Jul 2023 11:08:34 +0000 (19:08 +0800)]
btrfs: refactor main loop in memmove_extent_buffer()
[BACKGROUND]
Currently memove_extent_buffer() does a loop where it strop at any page
boundary inside [dst_offset, dst_offset + len) or [src_offset,
src_offset + len).
This is mostly allowing us to do copy_pages(), but if we're going to use
folios we will need to handle multi-page (the old behavior) or single
folio (the new optimization).
The current code would be a burden for future changes.
[ENHANCEMENT]
Instead of sticking with copy_pages(), here we utilize the new
__write_extent_buffer() helper to handle the writes.
Unlike the refactoring in memcpy_extent_buffer(), we can not just rely
on the write_extent_buffer() and only handle page boundaries inside src
range.
The function write_extent_buffer() itself is still doing forward
writing, thus it cannot handle the following case: (already in the
extent buffer memory operation tests, cross page overlapping run 2)
Src Page boundary
|///////|
|///|////|
Dst
In the above case, if we just follow page boundary in the src range, we
have no need to do any split, just one __write_extent_buffer() with
use_memmove = true.
But __write_extent_buffer() would split the dst range into two,
so it first copies the beginning part of the src range into the first half
of the dst range.
After this operation, the beginning of the dst range is already updated,
causing corruption.
So we have to follow the old behavior of handling both page boundaries.
And since we're the last caller of copy_pages(), we can remove it
completely.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Sat, 15 Jul 2023 11:08:33 +0000 (19:08 +0800)]
btrfs: refactor main loop in memcpy_extent_buffer()
[BACKGROUND]
Currently memcpy_extent_buffer() does a loop where it would stop at
any page boundary inside [dst_offset, dst_offset + len) or [src_offset,
src_offset + len).
This is mostly allowing us to do copy_pages(), but if we're going to use
folios we will need to handle multi-page (the old behavior) or single
folio (the new optimization).
The current code would be a burden for future changes.
[ENHANCEMENT]
There is a hidden pitfall of the naming memcpy_extent_buffer(), unlike
regular memcpy(), this function can handle overlapping ranges.
So here we extract write_extent_buffer() into a new internal helper,
__write_extent_buffer(), and add a new parameter @use_memmove, to
indicate whether we should use memmove() or regular memcpy().
Now we can go __write_extent_buffer() to handle writing into the dst
range, with proper overlapping detection.
This has a tiny change to the chance of calling memmove().
As the split only happens at the source range page boundaries, the
memcpy/memmove() range would be slightly larger than the old code,
thus slightly increase the chance we call memmove() other than memcopy().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Sat, 15 Jul 2023 11:08:32 +0000 (19:08 +0800)]
btrfs: copy all pages at once at the end of btrfs_clone_extent_buffer()
btrfs_clone_extent_buffer() calls copy_page() at each iteration but we
can copy all pages at the end in one go if there were no errors.
This would make later conversion to folios easier.
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Sat, 15 Jul 2023 11:08:31 +0000 (19:08 +0800)]
btrfs: refactor main loop in copy_extent_buffer_full()
[BACKGROUND]
copy_extent_buffer_full() currently does different handling for regular
and subpage cases, for regular cases it does a page by page copying.
For subpage cases, it just copies the content.
This is fine for the page based extent buffer code, but for the incoming
folio conversion, it can be a burden to add a new branch just to handle
all the different combinations (subpage vs regular, one single folio vs
multi pages).
[ENHANCE]
Instead of handling the different combinations, just go one single
handling for all cases, utilizing write_extent_buffer() to do the
copying.
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Sat, 15 Jul 2023 11:08:30 +0000 (19:08 +0800)]
btrfs: use write_extent_buffer() to implement write_extent_buffer_*id()
Helpers write_extent_buffer_chunk_tree_uuid() and
write_extent_buffer_fsid(), they can be implemented by
write_extent_buffer().
These two helpers are not that frequently used, they only get called
during initialization of a new tree block. There is not much need for
those slightly optimized versions. And since they can be easily
converted to one write_extent_buffer() call, define them as inline
helpers.
This would make later page/folio switch much easier, as all change only
need to happen in write_extent_buffer().
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Sat, 15 Jul 2023 11:08:29 +0000 (19:08 +0800)]
btrfs: refactor extent buffer bitmaps operations
[BACKGROUND]
Currently we handle extent bitmaps manually in
extent_buffer_bitmap_set() and extent_buffer_bitmap_clear().
Although with various helpers like eb_bitmap_offset() it's still a little
messy to read. The code seems to be a copy of bitmap_set(), but with
all the cross-page handling embedded into the code.
[ENHANCEMENT]
This patch would enhance the readability by introducing two helpers:
- memset_extent_buffer()
To handle the byte aligned range, thus all the cross-page handling is
done there.
- extent_buffer_get_byte()
This for the first and the last byte operations, which only need to
grab one byte, thus no need for any cross-page handling.
So we can split both extent_buffer_bitmap_set() and
extent_buffer_bitmap_clear() into 3 parts:
- Handle the first byte
If the range fits inside the first byte, we can exit early.
- Handle the byte aligned part
This is the part which can have cross-page operations, and it would
be handled by memset_extent_buffer().
- Handle the last byte
This refactoring does not only make the code a little easier to read,
but also makes later folio/page switch much easier, as the switch only
needs to be done inside memset_extent_buffer() and extent_buffer_get_byte().
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Sat, 15 Jul 2023 11:08:28 +0000 (19:08 +0800)]
btrfs: tests: add self tests for extent buffer memory operations
The new self tests would populate a memory range with random bytes, then
copy it to the extent buffer, so that we can verify if the extent buffer
memory operation and memmove()/memcopy() are resulting the same
contents.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Sat, 15 Jul 2023 11:08:27 +0000 (19:08 +0800)]
btrfs: tests: enhance extent buffer bitmap tests
Enhance extent bitmap tests for the following aspects:
- Remove unnecessary @len from __test_eb_bitmaps()
We can fetch the length from extent buffer
- Explicitly distinguish bit and byte length
Now every start/len inside bitmap tests would have either "byte_" or
"bit_" prefix to make it more explicit.
- Better error reporting
If we have mismatch bits, the error report would dump the following
contents:
* start bytenr
* bit number
* the full byte from bitmap
* the full byte from the extent
This is to save developers time so obvious problem can be found
immediately
- Extract bitmap set/clear and check operation into two helpers
This is to save some code lines, as we will have more tests to do.
- Add new tests
The following tests are added, mostly for the incoming extent bitmap
accessor refactoring:
* Set bits inside the same byte
* Clear bits inside the same byte
* Cross byte boundary set
* Cross byte boundary clear
* Cross multi-byte boundary set
* Cross multi-byte boundary clear
Those new tests have already saved my backend for the incoming extent
buffer bitmap refactoring.
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Thu, 20 Jul 2023 20:12:15 +0000 (16:12 -0400)]
btrfs: move comments to btrfs_loop_type definition
Some of these loop types aren't described, and they should be with the
definitions to make it easier to tell what each of them do.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Anand Jain [Thu, 27 Jul 2023 13:53:03 +0000 (21:53 +0800)]
btrfs: print name and pid when device scanning processes race
There is a race between systemd and mount, as both of them try to register
the device in the kernel. When systemd loses the race, it prints the
following message:
BTRFS error: device /dev/sdb7 belongs to fsid
1b3bacbf-14db-49c9-a3ef-
547998aacc4e, and the fs is already mounted.
The 'btrfs dev scan' registers one device at a time, so there is no way
for the mount thread to wait in the kernel for all the devices to have
registered as it won't know if all the devices are discovered.
For now, improve the error log by printing the command name and process
ID along with the error message.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Christoph Hellwig [Wed, 28 Jun 2023 15:31:44 +0000 (17:31 +0200)]
mm: remove folio_account_redirty
Fold folio_account_redirty into folio_redirty_for_writepage now
that all other users except for the also unused account_page_redirty
wrapper are gone.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Christoph Hellwig [Wed, 28 Jun 2023 15:31:43 +0000 (17:31 +0200)]
btrfs: fix zoned handling in submit_uncompressed_range
For zoned file systems we need to use run_delalloc_zoned to submit
writeback, as we need to write out partial allocations when running into
zone active limits.
submit_uncompressed_range currently always calls cow_file_range to
allocate blocks and thus misses the active zone limits handling. Fix
this by passing the pages_dirty argument to run_delalloc_zoned and always
using it from submit_uncompressed_range as it does the right thing for
zoned and non-zoned file systems.
To account for the fact that run_delalloc_zoned is now also used for
non-zoned file systems rename it to run_delalloc_cow, and add comment
describing it.
Fixes:
42c011000963 ("btrfs: zoned: introduce dedicated data write path for zoned filesystems")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Christoph Hellwig [Wed, 28 Jun 2023 15:31:42 +0000 (17:31 +0200)]
btrfs: don't redirty locked_page in run_delalloc_zoned
extent_write_locked_range currently expects that either all or no
pages are dirty when it is called. Bur run_delalloc_zoned is called
directly in the writepages path, and has the dirty bit cleared only
for locked_page and which the extent_write_cache_pages currently
operates. It currently works around this by redirtying locked_page,
but that is a bit inefficient and cumbersome. Pass a locked_page
argument to run_delalloc_zoned so that clearing the dirty bit can
be skipped on just that page.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Christoph Hellwig [Wed, 28 Jun 2023 15:31:41 +0000 (17:31 +0200)]
btrfs: refactor the zoned device handling in cow_file_range
Handling of the done_offset to cow_file_range is a bit confusing, as
it is not updated at all when the function succeeds, and the -EAGAIN
status is used bother for the case where we need to wait for a zone
finish and the one where the allocation was partially successful.
Change the calling convention so that done_offset is always updated,
and 0 is returned if some allocation was successful (partial allocation
can still only happen for zoned devices), and waiting for a zone
finish is done internally in cow_file_range instead of the caller.
Also write a comment explaining the logic.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Christoph Hellwig [Wed, 28 Jun 2023 15:31:40 +0000 (17:31 +0200)]
btrfs: don't redirty pages in compress_file_range
compress_file_range needs to clear the dirty bit before handing off work
to the compression worker threads to prevent processes coming in through
mmap and changing the file contents while the compression is accessing
the data (See commit
4adaa611020f ("Btrfs: fix race between mmap writes
and compression").
But when compress_file_range decides to not compress the data, it falls
back to submit_uncompressed_range which uses extent_write_locked_range
to write the uncompressed data. extent_write_locked_range currently
expects all pages to be marked dirty so that it can clear the dirty
bit itself, and thus compress_file_range has to redirty the page range.
Redirtying the page range is rather inefficient and also pointless,
so instead pass a pages_dirty parameter to extent_write_locked_range
and skip the redirty game entirely.
Note that compress_file_range was even redirtying the locked_page twice
given that extent_range_clear_dirty_for_io already redirties all pages
in the range, which must include locked_page if there is one.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Christoph Hellwig [Wed, 28 Jun 2023 15:31:39 +0000 (17:31 +0200)]
btrfs: share the code to free the page array in compress_file_range
compress_file_range has two code blocks to free the page array for the
compressed data. Share the code using a goto label.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Christoph Hellwig [Wed, 28 Jun 2023 15:31:38 +0000 (17:31 +0200)]
btrfs: use a separate label for the incompressible case in compress_file_range
compress_file_range can fail to compress either because of resource or
alignment constraints or because the data is incompressible. In the latter
case the inode is marked so that compression isn't tried again. Currently
that check is based on the condition that the pages array has been allocated
which is rather cryptic. Use a separate label to clearly distinguish this
case.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Christoph Hellwig [Wed, 28 Jun 2023 15:31:37 +0000 (17:31 +0200)]
btrfs: further simplify the compress or not logic in compress_file_range
Currently the logic whether to compress or not in compress_file_range is
a bit convoluted because it tries to share code for creating inline
extents for the compressible [1] path and the bail to uncompressed path.
But the latter isn't needed at all, because cow_file_range as called by
submit_uncompressed_range will already create inline extents as needed,
so there is no need to have special handling for it if we can live with
the fact that it will be called a bit later in the ->ordered_func of the
workqueue instead of right now.
[1] there is undocumented logic that creates an uncompressed inline
extent outside of the shall not compress logic if total_in is too small.
This logic isn't explained in comments or any commit log I could find,
so I've preserved it. Documentation explaining it would be appreciated
if anyone understands this code.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Christoph Hellwig [Wed, 28 Jun 2023 15:31:36 +0000 (17:31 +0200)]
btrfs: streamline compress_file_range
Reorder compress_file_range so that the main compression flow happens
straight line and not in branches. To do this ensure that pages is
always zeroed before a page allocation happens, which allows the
cleanup_and_bail_uncompressed label to clean up the page allocations
as needed.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Christoph Hellwig [Wed, 28 Jun 2023 15:31:35 +0000 (17:31 +0200)]
btrfs: merge submit_compressed_extents and async_cow_submit
The code in submit_compressed_extents just loops over the async_extents,
and doesn't need to be conditional on an inode being present, as there
won't be any async_extent in the list if we created and inline extent.
Merge the two functions to simplify the logic.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Christoph Hellwig [Wed, 28 Jun 2023 15:31:34 +0000 (17:31 +0200)]
btrfs: merge async_cow_start and compress_file_range
There is no good reason to have the simple async_cow_start wrapper,
merge the argument conversion into the main compress_file_range function.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Christoph Hellwig [Wed, 28 Jun 2023 15:31:33 +0000 (17:31 +0200)]
btrfs: don't clear async_chunk->inode in async_cow_start
Now that the ->inode check isn't needed in submit_compressed_extents
any more, there is no reason to clear the field early. Always keep
the inode around until the work item is finished and remove the special
casing, and the counting of compressed extents in compress_file_range.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Christoph Hellwig [Wed, 28 Jun 2023 15:31:32 +0000 (17:31 +0200)]
btrfs: clean up the check for uncompressed ranges in submit_one_async_extent
Instead of checking for a NULL !pages and explaining this with a cryptic
comment, just check the compression type for BTRFS_COMPRESS_NONE to make
the check self-explanatory.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Christoph Hellwig [Wed, 28 Jun 2023 15:31:31 +0000 (17:31 +0200)]
btrfs: reduce the number of arguments to btrfs_run_delalloc_range
Instead of a separate page_started argument that tells the callers that
btrfs_run_delalloc_range already started writeback by itself, overload
the return value with a positive 1 in additio to 0 and a negative error
code to indicate that is has already started writeback, and remove the
nr_written argument as that caller can calculate it directly based on
the range, and in fact already does so for the case where writeback
wasn't started yet.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Christoph Hellwig [Wed, 28 Jun 2023 15:31:30 +0000 (17:31 +0200)]
btrfs: improve the delalloc_to_write calculation in writepage_delalloc
Currently writepage_delalloc adds to delalloc_to_write in every loop
operation. That is not only more work than doing it once after the
loop, but can also over-increment the counter due to rounding errors
when a new loop iteration starts with an offset into a page.
Add a new page_start variable instead of recaculation that value over
and over, move the delalloc_to_write calculation out of the loop, use
the DIV_ROUND_UP helper instead of open coding it and remove the pointless
found local variable.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Christoph Hellwig [Wed, 28 Jun 2023 15:31:29 +0000 (17:31 +0200)]
btrfs: remove the return value from extent_write_locked_range
The return value from extent_write_locked_range is ignored, and that's
fine because the error reporting happens through the mapping and
ordered_extent.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Christoph Hellwig [Wed, 28 Jun 2023 15:31:28 +0000 (17:31 +0200)]
btrfs: remove the return value from submit_uncompressed_range
The return value from submit_uncompressed_range is ignored, and that's
fine because the error reporting happens through the mapping and
ordered_extent.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Christoph Hellwig [Wed, 28 Jun 2023 15:31:27 +0000 (17:31 +0200)]
btrfs: reduce debug spam from submit_compressed_extents
Move the printk that is supposed to help to debug failures in
submit_one_async_extent into submit_one_async_extent and make it
coniditonal on actually having an error condition instead of spamming
the log unconditionally.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Christoph Hellwig [Wed, 28 Jun 2023 15:31:26 +0000 (17:31 +0200)]
btrfs: remove end_extent_writepage
end_extent_writepage is a small helper that combines a call to
btrfs_mark_ordered_io_finished with conditional error-only calls to
btrfs_page_clear_uptodate and mapping_set_error with a somewhat
unfortunate calling convention that passes and inclusive end instead
of the len expected by the underlying functions.
Remove end_extent_writepage and open code it in the 4 callers. Out
of those two already are error-only and thus don't need the extra
conditional, and one already has the mapping_set_error, so a duplicate
call can be avoided.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Christoph Hellwig [Wed, 28 Jun 2023 15:31:25 +0000 (17:31 +0200)]
btrfs: remove btrfs_writepage_endio_finish_ordered
btrfs_writepage_endio_finish_ordered is a small wrapper around
btrfs_mark_ordered_io_finished that just changs the argument passing
slightly, and adds a tracepoint.
Move the tracpoint to btrfs_mark_ordered_io_finished, which means
it now also covers the error handling in btrfs_cleanup_ordered_extent
and switch all callers to just call btrfs_mark_ordered_io_finished
directly.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Christoph Hellwig [Wed, 28 Jun 2023 15:31:24 +0000 (17:31 +0200)]
btrfs: split page locking out of __process_pages_contig
There is a lot of complexity in __process_pages_contig to deal with the
PAGE_LOCK case that can return an error unlike all the other actions.
Open code the page iteration for page locking in lock_delalloc_pages and
remove all the now unused code from __process_pages_contig.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Christoph Hellwig [Wed, 28 Jun 2023 15:31:23 +0000 (17:31 +0200)]
btrfs: don't create inline extents in fallback_to_cow
For NOCOW files, run_delalloc_nocow can still fall back to COW
allocations when required and calls to fallback_to_cow helper for
that. For such an allocation we can have multiple ordered_extents
for existing extents that NOCOW overwrites and new allocations that
fallback_to_cow creates. If one of the new extents is an inline
extent, the writepages could would have to avoid normal page writeback
for them as indicated by the page_started return argument, which
run_delalloc_nocow can't return. Fix this by never creating inline
extents from fallback_to_cow.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Christoph Hellwig [Wed, 28 Jun 2023 15:31:22 +0000 (17:31 +0200)]
btrfs: pass a flags argument to cow_file_range
The int used as bool unlock is not a very good way to describe the
behavior, and the next patch will have to add another behavior modifier.
We'll do that by two bool parameters instead of adding bit flags. Now
specifies that the pages should always be kept locked. This is the
inverse of the old unlock argument.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
[ switch flags to bool ]
Signed-off-by: David Sterba <dsterba@suse.com>
Boris Burkov [Fri, 21 Jul 2023 16:02:07 +0000 (09:02 -0700)]
btrfs: fix start transaction qgroup rsv double free
btrfs_start_transaction reserves metadata space of the PERTRANS type
before it identifies a transaction to start/join. This allows flushing
when reserving that space without a deadlock. However, it results in a
race which temporarily breaks qgroup rsv accounting.
T1 T2
start_transaction
do_stuff
start_transaction
qgroup_reserve_meta_pertrans
commit_transaction
qgroup_free_meta_all_pertrans
hit an error starting txn
goto reserve_fail
qgroup_free_meta_pertrans (already freed!)
The basic issue is that there is nothing preventing another commit from
committing before start_transaction finishes (in fact sometimes we
intentionally wait for it) so any error path that frees the reserve is
at risk of this race.
While this exact space was getting freed anyway, and it's not a huge
deal to double free it (just a warning, the free code catches this), it
can result in incorrectly freeing some other pertrans reservation in
this same reservation, which could then lead to spuriously granting
reservations we might not have the space for. Therefore, I do believe it
is worth fixing.
To fix it, use the existing prealloc->pertrans conversion mechanism.
When we first reserve the space, we reserve prealloc space and only when
we are sure we have a transaction do we convert it to pertrans. This way
any racing commits do not blow away our reservation, but we still get a
pertrans reservation that is freed when _this_ transaction gets committed.
This issue can be reproduced by running generic/269 with either qgroups
or squotas enabled via mkfs on the scratch device.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
CC: stable@vger.kernel.org # 5.10+
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Boris Burkov [Fri, 21 Jul 2023 16:02:06 +0000 (09:02 -0700)]
btrfs: free qgroup rsv on io failure
If we do a write whose bio suffers an error, we will never reclaim the
qgroup reserved space for it. We allocate the space in the write_iter
codepath, then release the reservation as we allocate the ordered
extent, but we only create a delayed ref if the ordered extent finishes.
If it has an error, we simply leak the rsv. This is apparent in running
any error injecting (dmerror) fstests like btrfs/146 or btrfs/160. Such
tests fail due to dmesg on umount complaining about the leaked qgroup
data space.
When we clean up other aspects of space on failed ordered_extents, also
free the qgroup rsv.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
CC: stable@vger.kernel.org # 5.10+
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Goldwyn Rodrigues [Fri, 14 Jul 2023 15:18:19 +0000 (10:18 -0500)]
btrfs: remove duplicate free_async_extent_pages() on reservation error
While performing compressed writes, if the extent reservation fails, the
async extent pages are first freed in the error check for return value
ret, and then again at out_free label.
Remove the first call to free_async_extent_pages().
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Sun, 9 Jul 2023 07:08:18 +0000 (15:08 +0800)]
btrfs: move eb subpage preallocation out of the loop
Initially we preallocate btrfs_subpage structure in the main loop of
alloc_extent_buffer().
But later commit
fbca46eb46ec ("btrfs: make nodesize >= PAGE_SIZE case
to reuse the non-subpage routine") has made sure we only go subpage
routine if our nodesize is smaller than PAGE_SIZE.
This means for that case, we only need to allocate the subpage structure
once anyway.
So this patch would make the preallocation out of the main loop. This
would slightly reduce the workload when we hold the page lock, and make
code a little easier to read.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Christoph Hellwig [Tue, 27 Jun 2023 06:13:24 +0000 (08:13 +0200)]
btrfs: simplify the no-bioc fast path condition in btrfs_map_block
nr_alloc_stripes can't be one if we are writing to a replacement device,
as it is incremented for that case right above. Remove the duplicate
checks.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Wed, 14 Jun 2023 06:39:55 +0000 (14:39 +0800)]
btrfs: scrub: remove unused btrfs_path in scrub_simple_mirror()
The @path in scrub_simple_mirror() is no longer utilized after commit
e02ee89baa66 ("btrfs: scrub: switch scrub_simple_mirror() to scrub_stripe
infrastructure").
Before that commit, we call find_first_extent_item() directly, which
needs a path and that path can be reused. But after that switch commit,
the extent search is done inside queue_scrub_stripe(), which will no
longer accept a path from outside.
So the @path variable can be safely removed.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ remove the stale comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
Minjie Du [Mon, 17 Jul 2023 07:16:22 +0000 (15:16 +0800)]
btrfs: use folio_next_index() helper in extent_write_cache_pages
Simplify code pattern of 'folio->index + folio_nr_pages(folio)' by using
the existing helper folio_next_index().
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Minjie Du <duminjie@vivo.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Thu, 13 Jul 2023 14:10:26 +0000 (16:10 +0200)]
btrfs: use helper sizeof_field in struct accessors
There's a helper for obtaining size of a struct member, we can use it
instead of open coding the pointer magic.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Mon, 26 Jun 2023 09:55:25 +0000 (17:55 +0800)]
btrfs: deprecate integrity checker feature
The integrity checker feature needs to be enabled at compile time
(BTRFS_FS_CHECK_INTEGRITY) and then enabled by mount options check_int*.
Although it provides some unique features which can not be provided by
any other sanity checks like tree-checker, it does not only have high
CPU and memory overhead, but is also a maintenance burden.
For example, it's the only caller of btrfs_map_block() with
@need_raid_map = 0.
Considering most btrfs developers are not even testing this feature, I'm
here to propose deprecation of this feature.
For now only warning messages will be printed, the feature itself would
still work.
Removal time has been set to 6.7 release.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Fri, 30 Jun 2023 15:03:51 +0000 (16:03 +0100)]
btrfs: move btrfs_free_excluded_extents() into block-group.c
The function btrfs_free_excluded_extents() is only used by block-group.c,
so move it into block-group.c and make it static. Also removed unnecessary
variables that are used only once.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Fri, 30 Jun 2023 15:03:50 +0000 (16:03 +0100)]
btrfs: open code trivial btrfs_add_excluded_extent()
The code for btrfs_add_excluded_extent() is trivial, it's just a
set_extent_bit() call. However it's defined in extent-tree.c but it is
only used (twice) in block-group.c. So open code it in block-group.c,
reducing the need to export a trivial function.
Also since the only caller btrfs_add_excluded_extent() is prepared to
deal with errors, stop ignoring errors from the set_extent_bit() call.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Fri, 30 Jun 2023 15:03:49 +0000 (16:03 +0100)]
btrfs: make find_first_extent_bit() return a boolean
Currently find_first_extent_bit() returns a 0 if it found a range in the
given io tree and 1 if it didn't find any. There's no need to return any
errors, so make the return value a boolean and invert the logic to make
more sense: return true if it found a range and false if it didn't find
any range.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Fri, 30 Jun 2023 15:03:48 +0000 (16:03 +0100)]
btrfs: make btrfs_destroy_pinned_extent() return void
Currently btrfs_destroy_pinned_extent() is always returning 0 no matter
what and its caller ignores its return value (as well everything up in
the call chain). This is because this is called in the transaction abort
path, where we can't even deal with any errors since we are in a critical
situation already and cleanup of resources is done in a best effort
fashion.
So make btrfs_destroy_pinned_extent() return void.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Fri, 30 Jun 2023 15:03:47 +0000 (16:03 +0100)]
btrfs: make btrfs_destroy_marked_extents() return void
Currently btrfs_destroy_marked_extents() is returning the value of the
last call to find_first_extent_bit(), which returns a value of 1 meaning
no more ranges found the dirty pages io tree. This value is useless to the
single caller of btrfs_destroy_marked_extents(), which ignores any return
value from btrfs_destroy_marked_extents(). This is because it's only used
in the transaction abort path, where we can't even deal with any errors
since we are in a critical situation already and cleanup of resources is
done in a best effort fashion.
So make btrfs_destroy_marked_extents() return void.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Fri, 30 Jun 2023 15:03:46 +0000 (16:03 +0100)]
btrfs: rename add_new_free_space() to btrfs_add_new_free_space()
Since add_new_free_space() is exported, used outside block-group.c, rename
it to include the 'btrfs_' prefix.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Fri, 30 Jun 2023 15:03:45 +0000 (16:03 +0100)]
btrfs: update documentation for add_new_free_space()
The documentation for add_new_free_space() is stale and no longer correct:
1) It's no longer used only when caching a block group. It's also called
when creating a block group (btrfs_make_block_group()), when reading
a block group at mount time (read_one_block_group()) and when reading
the free space tree for a block group (typically the first time we
attempt to allocate from the block group);
2) It has nothing to do with pinned extents. It only deals with the
excluded extents io tree, which is used to track the locations of
super blocks in order to make sure we never add the location of a
super block to the free space cache of a block group.
So update the documention and also add a description of the arguments
and return values.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Tue, 20 Jun 2023 07:06:05 +0000 (15:06 +0800)]
btrfs: tracepoints: simplify raid56 events
After commit
6bfd0133bee2 ("btrfs: raid56: switch scrub path to use a
single function"), the raid56 implementation no longer uses different
endio functions for RMW/recover/scrub.
All read operations end in submit_read_wait_bio_list(), while all write
operations end in submit_write_bios(). This means quite some trace
events are out-of-date and no longer utilized.
This patch would unify the trace events into just two:
- trace_raid56_read()
Replaces trace_raid56_read_partial(), trace_raid56_scrub_read() and
trace_raid56_scrub_read_recover().
- trace_raid56_write()
Replaces trace_raid56_write_stripe() and
trace_raid56_scrub_write_stripe().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Anand Jain [Tue, 20 Jun 2023 08:55:09 +0000 (16:55 +0800)]
btrfs: sysfs: show if ACL support has been compiled in
ACL support depends on the compile-time configuration option
CONFIG_BTRFS_FS_POSIX_ACL. Prior to mounting a btrfs filesystem, it is not
possible to determine whether ACL support has been compiled in. To address
this, add a sysfs interface, /sys/fs/btrfs/features/acl, and check for ACL
support in the system's btrfs.
To determine ACL support:
Return 0 indicates ACL is not supported:
$ cat /sys/fs/btrfs/features/acl
0
Return 1 indicates ACL is supported:
$ cat /sys/fs/btrfs/features/acl
1
IMO, this is a better approach, so that we also know if kernel is older.
On an older kernel
$ ls /sys/fs/btrfs/features/acl
ls: cannot access '/sys/fs/btrfs/features/acl': No such file or directory
mount a btrfs filesystem
$ cat /proc/self/mounts | grep btrfs | grep -q noacl
$ echo $?
0
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Wed, 28 Jun 2023 08:11:15 +0000 (16:11 +0800)]
btrfs: raid56: remove unused BTRFS_RBIO_REBUILD_MISSING
Commit
aca43fe839e4 ("btrfs: remove unused raid56 functions which were
dedicated for scrub") removed the special handling of RAID56 scrub for
missing device.
As scrub goes full mirror_num based recovery, that means if it hits a
missing device in RAID56, it would just try the next mirror, which would
go through the BTRFS_RBIO_READ_REBUILD operation.
This means there is no longer any use of BTRFS_RBIO_REBUILD_MISSING
operation and we can safely remove it.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Tue, 27 Jun 2023 07:34:31 +0000 (15:34 +0800)]
btrfs: add comments for btrfs_map_block()
The function btrfs_map_block() is a critical part of the btrfs storage
layer, which handles mapping of logical ranges to physical ranges.
Thus it's better to have some basic explanation, especially on the
following points:
- Segment split by various boundaries
As a continuous logical range may be split into different segments,
due to various factors like zones and RAID0/5/6/10 boundaries.
- The meaning of @mirror_num
- The possible single stripe optimization
- One deprecated parameter @need_raid_map
Just explicitly mark it deprecated so we're aware of the problem.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Colin Ian King [Thu, 22 Jun 2023 07:54:30 +0000 (08:54 +0100)]
btrfs: remove redundant initialization of variables in log_new_ancestors
The variables leaf and slot are initialized when declared but the values
assigned to them are never read as they are being re-assigned later on.
The initializations are redundant and can be removed. Cleans up clang
scan build warnings:
fs/btrfs/tree-log.c:6797:25: warning: Value stored to 'leaf' during its
initialization is never read [deadcode.DeadStores]
fs/btrfs/tree-log.c:6798:7: warning: Value stored to 'slot' during its
initialization is never read [deadcode.DeadStores]
It's been there since
b8aa330d2acb ("Btrfs: improve performance on fsync
of files with multiple hardlinks") without any usage so it's safe to be
removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Colin Ian King [Wed, 21 Jun 2023 13:09:37 +0000 (14:09 +0100)]
btrfs: scrub: remove redundant division of stripe_nr
Variable stripe_nr is being divided by map->num_stripes however the
result is never read. The division and assignment are redundant and
can be removed. Cleans up clang scan build warning:
fs/btrfs/scrub.c:1264:3: warning: Value stored to 'stripe_nr' is
never read [deadcode.DeadStores]
The code is a leftover from
6ded22c1bfe6 ("btrfs: reduce div64 calls by
limiting the number of stripes of a chunk to u32") that converted div64
to normal division, it's the same but previous version did not trigger a
warning.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Julia Lawall [Fri, 23 Jun 2023 21:14:43 +0000 (23:14 +0200)]
btrfs: zoned: use vcalloc instead of for vzalloc in btrfs_get_dev_zone_info
Use vcalloc that checks potential multiplication overflows. The changes
were done using Coccinelle semantic patch.
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Linus Torvalds [Sun, 20 Aug 2023 13:02:52 +0000 (15:02 +0200)]
Linux 6.5-rc7
Linus Torvalds [Sun, 20 Aug 2023 06:26:51 +0000 (08:26 +0200)]
Merge tag 'tty-6.5-rc7' of git://git./linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small tty and serial core fixes for 6.5-rc7 that resolve
a lot of reported issues.
Primarily in here are the fixes for the serial bus code from Tony that
came in -rc1, as it hit wider testing with the huge number of
different types of systems and serial ports. All of the reported
issues with duplicate names and other issues with this code are now
resolved.
Other than that included in here is:
- n_gsm fix for a previous fix
- 8250 lockdep annotation fix
- fsl_lpuart serial driver fix
- TIOCSTI documentation update for previous CAP_SYS_ADMIN change
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: core: Fix serial core port id, including multiport devices
serial: 8250: drop lockdep annotation from serial8250_clear_IER()
tty: n_gsm: fix the UAF caused by race condition in gsm_cleanup_mux
serial: core: Revert port_id use
TIOCSTI: Document CAP_SYS_ADMIN behaviour in Kconfig
serial: 8250: Fix oops for port->pm on uart_change_pm()
serial: 8250: Reinit port_id when adding back serial8250_isa_devs
serial: core: Fix kmemleak issue for serial core device remove
MAINTAINERS: Merge TTY layer and serial drivers
serial: core: Fix serial_base_match() after fixing controller port name
serial: core: Fix serial core controller port name to show controller id
serial: core: Fix serial core port id to not use port->line
serial: core: Controller id cannot be negative
tty: serial: fsl_lpuart: Clear the error flags by writing 1 for lpuart32 platforms
Linus Torvalds [Sun, 20 Aug 2023 06:18:58 +0000 (08:18 +0200)]
Merge tag 'rust-fixes-6.5-rc7' of https://github.com/Rust-for-Linux/linux
Pull rust fix from Miguel Ojeda:
- Macros: fix 'HAS_*' redefinition by the '#[vtable]' macro
under conditional compilation
* tag 'rust-fixes-6.5-rc7' of https://github.com/Rust-for-Linux/linux:
rust: macros: vtable: fix `HAS_*` redefinition (`gen_const_name`)
Linus Torvalds [Sat, 19 Aug 2023 17:22:41 +0000 (19:22 +0200)]
Merge tag 'i2c-for-6.5-rc7' of git://git./linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Usual set of driver fixes. A bit more than usual because I was
unavailable for a while"
* tag 'i2c-for-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: bcm-iproc: Fix bcm_iproc_i2c_isr deadlock issue
i2c: Update documentation to use .probe() again
i2c: sun6i-p2wi: Fix an error message in probe()
i2c: hisi: Only handle the interrupt of the driver's transfer
i2c: tegra: Fix i2c-tegra DMA config option processing
i2c: tegra: Fix failure during probe deferral cleanup
i2c: designware: Handle invalid SMBus block data response length value
i2c: designware: Correct length byte validation logic
i2c: imx-lpi2c: return -EINVAL when i2c peripheral clk doesn't work
Linus Torvalds [Sat, 19 Aug 2023 15:57:07 +0000 (17:57 +0200)]
Merge tag 'for-6.5-rc6-tag' of git://git./linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix infinite loop in readdir(), could happen in a big directory when
files get renamed during enumeration
- fix extent map handling of skipped pinned ranges
- fix a corner case when handling ordered extent length
- fix a potential crash when balance cancel races with pause
- verify correct uuid when starting scrub or device replace
* tag 'for-6.5-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix incorrect splitting in btrfs_drop_extent_map_range
btrfs: fix BUG_ON condition in btrfs_cancel_balance
btrfs: only subtract from len_to_oe_boundary when it is tracking an extent
btrfs: fix replace/scrub failure with metadata_uuid
btrfs: fix infinite directory reads
Linus Torvalds [Sat, 19 Aug 2023 15:43:55 +0000 (17:43 +0200)]
Merge tag 'fbdev-for-6.5-rc7' of git://git./linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes and cleanups from Helge Deller:
- various code cleanups in amifb, atmel_lcdfb, ssd1307fb, kyro and
goldfishfb
* tag 'fbdev-for-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: goldfishfb: Do not check 0 for platform_get_irq()
fbdev: atmel_lcdfb: Remove redundant of_match_ptr()
fbdev: kyro: Remove unused declarations
fbdev: ssd1307fb: Print the PWM's label instead of its number
fbdev: mmp: fix value check in mmphw_probe()
fbdev: amifb: Replace zero-length arrays with DECLARE_FLEX_ARRAY() helper
Linus Torvalds [Sat, 19 Aug 2023 15:31:46 +0000 (17:31 +0200)]
Merge tag 'block-6.5-2023-08-19' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"Main thing here is the fix for the regression in flush handling which
caused IO hangs/stalls for a few reporters. Hopefully that should all
be sorted out now. Outside of that, just a few minor fixes for issues
that were introduced in this cycle"
* tag 'block-6.5-2023-08-19' of git://git.kernel.dk/linux:
blk-mq: release scheduler resource when request completes
blk-crypto: dynamically allocate fallback profile
blk-cgroup: hold queue_lock when removing blkg->q_node
drivers/rnbd: restore sysfs interface to rnbd-client
Chengming Zhou [Sun, 13 Aug 2023 15:23:25 +0000 (23:23 +0800)]
blk-mq: release scheduler resource when request completes
Chuck reported [1] an IO hang problem on NFS exports that reside on SATA
devices and bisected to commit
615939a2ae73 ("blk-mq: defer to the normal
submission path for post-flush requests").
We analysed the IO hang problem, found there are two postflush requests
waiting for each other.
The first postflush request completed the REQ_FSEQ_DATA sequence, so go to
the REQ_FSEQ_POSTFLUSH sequence and added in the flush pending list, but
failed to blk_kick_flush() because of the second postflush request which
is inflight waiting in scheduler queue.
The second postflush waiting in scheduler queue can't be dispatched because
the first postflush hasn't released scheduler resource even though it has
completed by itself.
Fix it by releasing scheduler resource when the first postflush request
completed, so the second postflush can be dispatched and completed, then
make blk_kick_flush() succeed.
While at it, remove the check for e->ops.finish_request, as all
schedulers set that. Reaffirm this requirement by adding a WARN_ON_ONCE()
at scheduler registration time, just like we do for insert_requests and
dispatch_request.
[1] https://lore.kernel.org/all/
7A57C7AE-A51A-4254-888B-
FE15CA21F9E9@oracle.com/
Link: https://lore.kernel.org/linux-block/20230819031206.2744005-1-chengming.zhou@linux.dev/
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/
202308172100.
8ce4b853-oliver.sang@intel.com
Fixes:
615939a2ae73 ("blk-mq: defer to the normal submission path for post-flush requests")
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20230813152325.3017343-1-chengming.zhou@linux.dev
[axboe: folded in incremental fix and added tags]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Sat, 19 Aug 2023 11:13:55 +0000 (13:13 +0200)]
Merge tag 'media/v6.5-3' of git://git./linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"Three driver fixes"
* tag 'media/v6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: imx: imx7-media-csi: Fix applying format constraints
media: uvcvideo: Fix menu count handling for userspace XU mappings
media: mtk-jpeg: Set platform driver data earlier
Linus Torvalds [Sat, 19 Aug 2023 08:46:02 +0000 (10:46 +0200)]
Merge tag 'x86_urgent_for_v6.5_rc7' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"Extraordinary embargoed times call for extraordinary measures. That's
why this week's x86/urgent branch is larger than usual, containing all
the known fallout fixes after the SRSO mitigation got merged.
I know, it is a bit late in the game but everyone who has reported a
bug stemming from the SRSO pile, has tested that branch and has
confirmed that it fixes their bug.
Also, I've run it on every possible hardware I have and it is looking
good. It is running on this very machine while I'm typing, for 2 days
now without an issue. Famous last words...
- Use LEA ...%rsp instead of ADD %rsp in the Zen1/2 SRSO return
sequence as latter clobbers flags which interferes with fastop
emulation in KVM, leading to guests freezing during boot
- A fix for the DIV(0) quotient data leak on Zen1 to clear the
divider buffers at the right time
- Disable the SRSO mitigation on unaffected configurations as it got
enabled there unnecessarily
- Change .text section name to fix CONFIG_LTO_CLANG builds
- Improve the optprobe indirect jmp check so that certain
configurations can still be able to use optprobes at all
- A serious and good scrubbing of the untraining routines by PeterZ:
- Add proper speculation stopping traps so that objtool is happy
- Adjust objtool to handle the new thunks
- Make the thunk pointer assignable to the different untraining
sequences at runtime, thus avoiding the alternative at the
return thunk. It simplifies the code a bit too.
- Add a entry_untrain_ret() main entry point which selects the
respective untraining sequence
- Rename things so that they're more clear
- Fix stack validation with FRAME_POINTER=y builds
- Fix static call patching to handle when a JMP to the return thunk
is the last insn on the very last module memory page
- Add more documentation about what each untraining routine does and
why"
* tag 'x86_urgent_for_v6.5_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/srso: Correct the mitigation status when SMT is disabled
x86/static_call: Fix __static_call_fixup()
objtool/x86: Fixup frame-pointer vs rethunk
x86/srso: Explain the untraining sequences a bit more
x86/cpu/kvm: Provide UNTRAIN_RET_VM
x86/cpu: Cleanup the untrain mess
x86/cpu: Rename srso_(.*)_alias to srso_alias_\1
x86/cpu: Rename original retbleed methods
x86/cpu: Clean up SRSO return thunk mess
x86/alternative: Make custom return thunk unconditional
objtool/x86: Fix SRSO mess
x86/cpu: Fix up srso_safe_ret() and __x86_return_thunk()
x86/cpu: Fix __x86_return_thunk symbol type
x86/retpoline,kprobes: Skip optprobe check for indirect jumps with retpolines and IBT
x86/retpoline,kprobes: Fix position of thunk sections with CONFIG_LTO_CLANG
x86/srso: Disable the mitigation on unaffected configurations
x86/CPU/AMD: Fix the DIV(0) initial fix attempt
x86/retpoline: Don't clobber RFLAGS during srso_safe_ret()
Linus Torvalds [Sat, 19 Aug 2023 06:32:16 +0000 (08:32 +0200)]
Merge tag 'powerpc-6.5-6' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
- Fix hardened usercopy BUG when using /proc based firmware update
interface
Thanks to Nathan Lynch and Kees Cook.
* tag 'powerpc-6.5-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/rtas_flash: allow user copy to flash block cache objects
Sweet Tea Dorminy [Thu, 17 Aug 2023 14:15:56 +0000 (10:15 -0400)]
blk-crypto: dynamically allocate fallback profile
blk_crypto_profile_init() calls lockdep_register_key(), which warns and
does not register if the provided memory is a static object.
blk-crypto-fallback currently has a static blk_crypto_profile and calls
blk_crypto_profile_init() thereupon, resulting in the warning and
failure to register.
Fortunately it is simple enough to use a dynamically allocated profile
and make lockdep function correctly.
Fixes:
2fb48d88e77f ("blk-crypto: use dynamic lock class for blk_crypto_profile::lock")
Cc: stable@vger.kernel.org
Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230817141615.15387-1-sweettea-kernel@dorminy.me
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ming Lei [Thu, 17 Aug 2023 14:17:51 +0000 (22:17 +0800)]
blk-cgroup: hold queue_lock when removing blkg->q_node
When blkg is removed from q->blkg_list from blkg_free_workfn(), queue_lock
has to be held, otherwise, all kinds of bugs(list corruption, hard lockup,
..) can be triggered from blkg_destroy_all().
Fixes:
f1c006f1c685 ("blk-cgroup: synchronize pd_free_fn() from blkg_free_workfn() and blkcg_deactivate_policy()")
Cc: Yu Kuai <yukuai3@huawei.com>
Cc: xiaoli feng <xifeng@redhat.com>
Cc: Chunyu Hu <chuhu@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230817141751.1128970-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Li Zhijian [Wed, 16 Aug 2023 02:22:10 +0000 (10:22 +0800)]
drivers/rnbd: restore sysfs interface to rnbd-client
Commit
137380c0ec40 renamed 'rnbd-client' to 'rnbd_client', this changed
sysfs interface to /sys/devices/virtual/rnbd_client/ctl/map_device
from /sys/devices/virtual/rnbd-client/ctl/map_device.
CC: Ivan Orlov <ivan.orlov0322@gmail.com>
CC: "Md. Haris Iqbal" <haris.iqbal@ionos.com>
CC: Jack Wang <jinpu.wang@ionos.com>
Fixes:
137380c0ec40 ("block/rnbd: make all 'class' structures const")
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20230816022210.2501228-1-lizhijian@fujitsu.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Fri, 18 Aug 2023 18:52:25 +0000 (20:52 +0200)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"Two more SME fixes related to ptrace(): ensure that the SME is
properly set up for the target thread and that the thread sees
the ZT registers set via ptrace"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/ptrace: Ensure that the task sees ZT writes on first use
arm64/ptrace: Ensure that SME is set up for target when writing SSVE state
Linus Torvalds [Fri, 18 Aug 2023 18:36:49 +0000 (20:36 +0200)]
Merge tag 'gpio-fixes-for-v6.5-rc7' of git://git./linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix a regression in the sysfs interface
- fix a reference counting bug that's been around for years
- MAINTAINERS update
* tag 'gpio-fixes-for-v6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: fix reference leaks when removing GPIO chips still in use
gpiolib: sysfs: Do unexport GPIO when user asks for it
MAINTAINERS: add content regex for gpio-regmap
Linus Torvalds [Fri, 18 Aug 2023 17:41:12 +0000 (19:41 +0200)]
Merge tag '6.5-rc6-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fix from Steve French:
"A small SMB mount option fix, also for stable"
* tag '6.5-rc6-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: fix null auth
Linus Torvalds [Fri, 18 Aug 2023 17:26:53 +0000 (19:26 +0200)]
Merge tag 'riscv-for-linus-6.5-rc7' of git://git./linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- avoid excessive rejections from seccomp RET_ERRNO rules
- compressed jal/jalr decoding fix
- fixes for independent irq/softirq stacks on kernels built with
CONFIG_FRAME_POINTER=n
- avoid a hang handling uaccess fixups
- another build fix for toolchain ISA strings, this time for Zicsr and
Zifenci on old GNU toolchains
* tag 'riscv-for-linus-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Handle zicsr/zifencei issue between gcc and binutils
riscv: uaccess: Return the number of bytes effectively not copied
riscv: stack: Fixup independent softirq stack for CONFIG_FRAME_POINTER=n
riscv: stack: Fixup independent irq stack for CONFIG_FRAME_POINTER=n
riscv: correct riscv_insn_is_c_jr() and riscv_insn_is_c_jalr()
riscv: entry: set a0 = -ENOSYS only when syscall != -1
Linus Torvalds [Fri, 18 Aug 2023 17:17:01 +0000 (19:17 +0200)]
Merge tag 'sound-6.5-rc7' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Slightly bigger than I wished, but here we go, a collection of fixes
for 6.5.
The only change in the core side is the ease for repeated ASoC error
messages, and the rest are all pretty device-specific small fixes
(including regression fixes) for ASoC Intel and HD-audio / USB-audio
quirks"
* tag 'sound-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek - Remodified 3k pull low procedure
ASoC: rt1308-sdw: fix random louder sound
ALSA: hda/cs8409: Support new Dell Dolphin Variants
ALSA: hda/realtek: Switch Dell Oasis models to use SPI
ALSA: hda/realtek: Add quirks for HP G11 Laptops
ASoC: meson: axg-tdm-formatter: fix channel slot allocation
ASoC: SOF: ipc4-topology: Update the basecfg for copier earlier
ASoC: SOF: intel: hda: Clean up link DMA for IPC3 during stop
ASoC: Intel: sof-sdw-cs42142: fix for codec button mapping
ASoC: Intel: sof-sdw: update jack detection quirk for LunarLake RVP
ASoC: SOF: Fix incorrect use of sizeof in sof_ipc3_do_rx_work()
ASoC: lower "no backend DAIs enabled for ... Port" log severity
ASoC: rt5665: add missed regulator_bulk_disable
ASoC: max98363: don't return on success reading revision ID
ALSA: usb-audio: Add support for Mythware XA001AU capture and playback interfaces.
ASoC: fsl: micfil: Use dual license micfil code
Linus Torvalds [Fri, 18 Aug 2023 17:10:41 +0000 (19:10 +0200)]
Merge tag 'mmc-v6.5-rc1-2' of git://git./linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Fix in_flight[issue_type] value error to properly manage requests
MMC host:
- wbsd: Fix double free in the probe error path
- sunplus: Fix error path in probe
- sdhci_f_sdh30: Fix order of function calls in sdhci_f_sdh30_remove"
* tag 'mmc-v6.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: f-sdh30: fix order of function calls in sdhci_f_sdh30_remove
mmc: sunplus: Fix error handling in spmmc_drv_probe()
mmc: sunplus: fix return value check of mmc_add_host()
mmc: wbsd: fix double mmc_free_host() in wbsd_init()
mmc: block: Fix in_flight[issue_type] value error
Linus Torvalds [Fri, 18 Aug 2023 16:37:40 +0000 (18:37 +0200)]
Merge tag 'pinctrl-v6.5-3' of git://git./linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Fixes two issues with the Qualcomm SA8775P platform:
- Some minor device tree binding flunky that is nice to iron out but
more importantly:
- Support the increased interrupt targets mask from 3 to 4 bits,
making interrupts with higher (hardware) numbers work"
* tag 'pinctrl-v6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: qcom: Add intr_target_width field to support increased number of interrupt targets
dt-bindings: pinctrl: qcom,sa8775p-tlmm: add gpio function constant
Linus Torvalds [Fri, 18 Aug 2023 16:24:41 +0000 (18:24 +0200)]
Merge tag 'soc-fixes-6.5-3' of git://git./linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"As usual, mostly DT fixes for the major Arm platforms from Qualcomm
and NXP, plus a bit for Rockchips and others:
The qualcomm fixes mainly deal with their higher-end arm64 devices
trees, fixing issues in L3 interconnect, crypto, thermal, UFS and a
regression for the DSI phy.
NXP i.MX has two correctness fixes for the 64-bit chips, dealing with
the imx93 "anatop" module and the CSI interface. On the 32-bit side,
there are functional fixes for RTC, display and SD card intefaces.
Rockchip fixes are for wifi support on certain boards, a eMMC
stability and DT build warnings.
On TI OMAP, a regulator is described in DT to avoid problems with the
ethernet phy initialization.
The code changes include a missing MMIO serialization on OMAP, plus a
few minor fixes on ASpeed and AMD/Zynq chips"
* tag 'soc-fixes-6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits)
ARM: dts: am335x-bone-common: Add vcc-supply for on-board eeprom
ARM: dts: am335x-bone-common: Add GPIO PHY reset on revision C3 board
soc: aspeed: socinfo: Add kfree for kstrdup
soc: aspeed: uart-routing: Use __sysfs_match_string
ARM: dts: integrator: fix PCI bus dtc warnings
arm64: dts: imx93: Fix anatop node size
arm64: dts: qcom: sc7180: Fix DSI0_PHY reg-names
ARM: dts: imx: Set default tuning step for imx6sx usdhc
arm64: dts: imx8mm: Drop CSI1 PHY reference clock configuration
arm64: dts: imx8mn: Drop CSI1 PHY reference clock configuration
ARM: dts: imx: Set default tuning step for imx7d usdhc
ARM: dts: imx6: phytec: fix RTC interrupt level
ARM: dts: imx6sx: Remove LDB endpoint
arm64: dts: rockchip: Fix Wifi/Bluetooth on ROCK Pi 4 boards
ARM: zynq: Explicitly include correct DT includes
arm64: dts: qcom: sa8775p-ride: Update L4C parameters
arm64: dts: rockchip: minor whitespace cleanup around '='
arm64: dts: rockchip: Disable HS400 for eMMC on ROCK 4C+
arm64: dts: rockchip: Disable HS400 for eMMC on ROCK Pi 4
arm64: dts: rockchip: add missing space before { on indiedroid nova
...
Linus Torvalds [Fri, 18 Aug 2023 16:13:36 +0000 (18:13 +0200)]
Merge tag 'asm-generic-fix-6.5' of git://git./linux/kernel/git/arnd/asm-generic
Pull asm-generic regression fix from Arnd Bergmann:
"Just one partial revert for a commit from the merge window that caused
annoying behavior when building old kernels on arm64 hosts"
* tag 'asm-generic-fix-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic: partially revert "Unify uapi bitsperlong.h for arm64, riscv and loongarch"
Josef Bacik [Thu, 17 Aug 2023 20:57:30 +0000 (16:57 -0400)]
btrfs: fix incorrect splitting in btrfs_drop_extent_map_range
In production we were seeing a variety of WARN_ON()'s in the extent_map
code, specifically in btrfs_drop_extent_map_range() when we have to call
add_extent_mapping() for our second split.
Consider the following extent map layout
PINNED
[0 16K) [32K, 48K)
and then we call btrfs_drop_extent_map_range for [0, 36K), with
skip_pinned == true. The initial loop will have
start = 0
end = 36K
len = 36K
we will find the [0, 16k) extent, but since we are pinned we will skip
it, which has this code
start = em_end;
if (end != (u64)-1)
len = start + len - em_end;
em_end here is 16K, so now the values are
start = 16K
len = 16K + 36K - 16K = 36K
len should instead be 20K. This is a problem when we find the next
extent at [32K, 48K), we need to split this extent to leave [36K, 48k),
however the code for the split looks like this
split->start = start + len;
split->len = em_end - (start + len);
In this case we have
em_end = 48K
split->start = 16K + 36K // this should be 16K + 20K
split->len = 48K - (16K + 36K) // this overflows as 16K + 36K is 52K
and now we have an invalid extent_map in the tree that potentially
overlaps other entries in the extent map. Even in the non-overlapping
case we will have split->start set improperly, which will cause problems
with any block related calculations.
We don't actually need len in this loop, we can simply use end as our
end point, and only adjust start up when we find a pinned extent we need
to skip.
Adjust the logic to do this, which keeps us from inserting an invalid
extent map.
We only skip_pinned in the relocation case, so this is relatively rare,
except in the case where you are running relocation a lot, which can
happen with auto relocation on.
Fixes:
55ef68990029 ("Btrfs: Fix btrfs_drop_extent_cache for skip pinned case")
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Borislav Petkov (AMD) [Tue, 15 Aug 2023 09:53:13 +0000 (11:53 +0200)]
x86/srso: Correct the mitigation status when SMT is disabled
Specify how is SRSO mitigated when SMT is disabled. Also, correct the
SMT check for that.
Fixes:
e9fbc47b818b ("x86/srso: Disable the mitigation on unaffected configurations")
Suggested-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20230814200813.p5czl47zssuej7nv@treble
Linus Torvalds [Fri, 18 Aug 2023 04:52:23 +0000 (06:52 +0200)]
Merge tag 'net-6.5-rc7' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from ipsec and netfilter.
No known outstanding regressions.
Fixes to fixes:
- virtio-net: set queues after driver_ok, avoid a potential race
added by recent fix
- Revert "vlan: Fix VLAN 0 memory leak", it may lead to a warning
when VLAN 0 is registered explicitly
- nf_tables:
- fix false-positive lockdep splat in recent fixes
- don't fail inserts if duplicate has expired (fix test failures)
- fix races between garbage collection and netns dismantle
Current release - new code bugs:
- mlx5: Fix mlx5_cmd_update_root_ft() error flow
Previous releases - regressions:
- phy: fix IRQ-based wake-on-lan over hibernate / power off
Previous releases - always broken:
- sock: fix misuse of sk_under_memory_pressure() preventing system
from exiting global TCP memory pressure if a single cgroup is under
pressure
- fix the RTO timer retransmitting skb every 1ms if linear option is
enabled
- af_key: fix sadb_x_filter validation, amment netlink policy
- ipsec: fix slab-use-after-free in decode_session6()
- macb: in ZynqMP resume always configure PS GTR for non-wakeup
source
Misc:
- netfilter: set default timeout to 3 secs for sctp shutdown send and
recv state (from 300ms), align with protocol timers"
* tag 'net-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (49 commits)
ice: Block switchdev mode when ADQ is active and vice versa
qede: fix firmware halt over suspend and resume
net: do not allow gso_size to be set to GSO_BY_FRAGS
sock: Fix misuse of sk_under_memory_pressure()
sfc: don't fail probe if MAE/TC setup fails
sfc: don't unregister flow_indr if it was never registered
net: dsa: mv88e6xxx: Wait for EEPROM done before HW reset
net/mlx5: Fix mlx5_cmd_update_root_ft() error flow
net/mlx5e: XDP, Fix fifo overrun on XDP_REDIRECT
i40e: fix misleading debug logs
iavf: fix FDIR rule fields masks validation
ipv6: fix indentation of a config attribute
mailmap: add entries for Simon Horman
broadcom: b44: Use b44_writephy() return value
net: openvswitch: reject negative ifindex
team: Fix incorrect deletion of ETH_P_8021AD protocol vid from slaves
net: phy: broadcom: stub c45 read/write for 54810
netfilter: nft_dynset: disallow object maps
netfilter: nf_tables: GC transaction race with netns dismantle
netfilter: nf_tables: fix GC transaction races with netns and netlink event exit path
...
Linus Torvalds [Fri, 18 Aug 2023 04:37:34 +0000 (06:37 +0200)]
Merge tag 'drm-fixes-2023-08-18-1' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Regular enough week, mostly the usual amdgpu and i915 fixes. Also
qaic, nouveau, qxl and a revert for an EDID patch that had some side
effects, along with a couple of panel fixes.
edid:
- revert mode parsing fix that had side effects.
i915:
- Fix the flow for ignoring GuC SLPC efficient frequency selection
- Fix SDVO panel_type initialization
- Fix display probe for IVB Q and IVB D GT2 server
nouveau:
- fix use-after-free in connector code
qaic:
- integer overflow check fix
- fix slicing memory leak
panel:
- fix JDI LT070ME05000 probing
- fix AUO G121EAN01 timings
amdgpu:
- SMU 13.x fixes
- Fix mcbp parameter for gfx9
- SMU 11.x fixes
- Temporary fix for large numbers of XCP partitions
- S0ix fixes
- DCN 2.0 fix
qxl:
- fix use after free race in dumb object allocation"
* tag 'drm-fixes-2023-08-18-1' of git://anongit.freedesktop.org/drm/drm:
drm/qxl: fix UAF on handle creation
Revert "drm/edid: Fix csync detailed mode parsing"
drm/nouveau/disp: fix use-after-free in error handling of nouveau_connector_create
Revert "Revert "drm/amdgpu/display: change pipe policy for DCN 2.0""
drm/amd: flush any delayed gfxoff on suspend entry
drm/amdgpu: skip fence GFX interrupts disable/enable for S0ix
drm/amdgpu: skip xcp drm device allocation when out of drm resource
drm/amd/pm: Update pci link width for smu v13.0.6
drm/amd/pm: Fix temperature unit of SMU v13.0.6
drm/amdgpu/pm: fix throttle_status for other than MP1 11.0.7
drm/amdgpu: disable mcbp if parameter zero is set
drm/amd/pm: disallow the fan setting if there is no fan on smu 13.0.0
accel/qaic: Clean up integer overflow checking in map_user_pages()
accel/qaic: Fix slicing memory leak
drm/i915: fix display probe for IVB Q and IVB D GT2 server
drm/i915/sdvo: fix panel_type initialization
drm/i915/guc/slpc: Restore efficient freq earlier
drm/panel: simple: Fix AUO G121EAN01 panel timings according to the docs
drm/panel: JDI LT070ME05000 simplify with dev_err_probe()
Jakub Kicinski [Thu, 17 Aug 2023 21:35:34 +0000 (14:35 -0700)]
Merge branch '40GbE' of git://git./linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-08-16 (iavf, i40e)
This series contains updates to iavf and i40e drivers.
Piotr adds checks for unsupported Flow Director rules on iavf.
Andrii replaces incorrect 'write' messaging on read operations for i40e.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
i40e: fix misleading debug logs
iavf: fix FDIR rule fields masks validation
====================
Link: https://lore.kernel.org/r/20230816193308.1307535-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Wander Lairson Costa [Mon, 14 Aug 2023 16:51:19 +0000 (13:51 -0300)]
drm/qxl: fix UAF on handle creation
qxl_mode_dumb_create() dereferences the qobj returned by
qxl_gem_object_create_with_handle(), but the handle is the only one
holding a reference to it.
A potential attacker could guess the returned handle value and closes it
between the return of qxl_gem_object_create_with_handle() and the qobj
usage, triggering a use-after-free scenario.
Reproducer:
int dri_fd =-1;
struct drm_mode_create_dumb arg = {0};
void gem_close(int handle);
void* trigger(void* ptr)
{
int ret;
arg.width = arg.height = 0x20;
arg.bpp = 32;
ret = ioctl(dri_fd, DRM_IOCTL_MODE_CREATE_DUMB, &arg);
if(ret)
{
perror("[*] DRM_IOCTL_MODE_CREATE_DUMB Failed");
exit(-1);
}
gem_close(arg.handle);
while(1) {
struct drm_mode_create_dumb args = {0};
args.width = args.height = 0x20;
args.bpp = 32;
ret = ioctl(dri_fd, DRM_IOCTL_MODE_CREATE_DUMB, &args);
if (ret) {
perror("[*] DRM_IOCTL_MODE_CREATE_DUMB Failed");
exit(-1);
}
printf("[*] DRM_IOCTL_MODE_CREATE_DUMB created, %d\n", args.handle);
gem_close(args.handle);
}
return NULL;
}
void gem_close(int handle)
{
struct drm_gem_close args;
args.handle = handle;
int ret = ioctl(dri_fd, DRM_IOCTL_GEM_CLOSE, &args); // gem close handle
if (!ret)
printf("gem close handle %d\n", args.handle);
}
int main(void)
{
dri_fd= open("/dev/dri/card0", O_RDWR);
printf("fd:%d\n", dri_fd);
if(dri_fd == -1)
return -1;
pthread_t tid1;
if(pthread_create(&tid1,NULL,trigger,NULL)){
perror("[*] thread_create tid1\n");
return -1;
}
while (1)
{
gem_close(arg.handle);
}
return 0;
}
This is a KASAN report:
==================================================================
BUG: KASAN: slab-use-after-free in qxl_mode_dumb_create+0x3c2/0x400 linux/drivers/gpu/drm/qxl/qxl_dumb.c:69
Write of size 1 at addr
ffff88801136c240 by task poc/515
CPU: 1 PID: 515 Comm: poc Not tainted 6.3.0 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-debian-1.16.0-4 04/01/2014
Call Trace:
<TASK>
__dump_stack linux/lib/dump_stack.c:88
dump_stack_lvl+0x48/0x70 linux/lib/dump_stack.c:106
print_address_description linux/mm/kasan/report.c:319
print_report+0xd2/0x660 linux/mm/kasan/report.c:430
kasan_report+0xd2/0x110 linux/mm/kasan/report.c:536
__asan_report_store1_noabort+0x17/0x30 linux/mm/kasan/report_generic.c:383
qxl_mode_dumb_create+0x3c2/0x400 linux/drivers/gpu/drm/qxl/qxl_dumb.c:69
drm_mode_create_dumb linux/drivers/gpu/drm/drm_dumb_buffers.c:96
drm_mode_create_dumb_ioctl+0x1f5/0x2d0 linux/drivers/gpu/drm/drm_dumb_buffers.c:102
drm_ioctl_kernel+0x21d/0x430 linux/drivers/gpu/drm/drm_ioctl.c:788
drm_ioctl+0x56f/0xcc0 linux/drivers/gpu/drm/drm_ioctl.c:891
vfs_ioctl linux/fs/ioctl.c:51
__do_sys_ioctl linux/fs/ioctl.c:870
__se_sys_ioctl linux/fs/ioctl.c:856
__x64_sys_ioctl+0x13d/0x1c0 linux/fs/ioctl.c:856
do_syscall_x64 linux/arch/x86/entry/common.c:50
do_syscall_64+0x5b/0x90 linux/arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc linux/arch/x86/entry/entry_64.S:120
RIP: 0033:0x7ff5004ff5f7
Code: 00 00 00 48 8b 05 99 c8 0d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 69 c8 0d 00 f7 d8 64 89 01 48
RSP: 002b:
00007ff500408ea8 EFLAGS:
00000286 ORIG_RAX:
0000000000000010
RAX:
ffffffffffffffda RBX:
0000000000000000 RCX:
00007ff5004ff5f7
RDX:
00007ff500408ec0 RSI:
00000000c02064b2 RDI:
0000000000000003
RBP:
00007ff500408ef0 R08:
0000000000000000 R09:
000000000000002a
R10:
0000000000000000 R11:
0000000000000286 R12:
00007fff1c6cdafe
R13:
00007fff1c6cdaff R14:
00007ff500408fc0 R15:
0000000000802000
</TASK>
Allocated by task 515:
kasan_save_stack+0x38/0x70 linux/mm/kasan/common.c:45
kasan_set_track+0x25/0x40 linux/mm/kasan/common.c:52
kasan_save_alloc_info+0x1e/0x40 linux/mm/kasan/generic.c:510
____kasan_kmalloc linux/mm/kasan/common.c:374
__kasan_kmalloc+0xc3/0xd0 linux/mm/kasan/common.c:383
kasan_kmalloc linux/./include/linux/kasan.h:196
kmalloc_trace+0x48/0xc0 linux/mm/slab_common.c:1066
kmalloc linux/./include/linux/slab.h:580
kzalloc linux/./include/linux/slab.h:720
qxl_bo_create+0x11a/0x610 linux/drivers/gpu/drm/qxl/qxl_object.c:124
qxl_gem_object_create+0xd9/0x360 linux/drivers/gpu/drm/qxl/qxl_gem.c:58
qxl_gem_object_create_with_handle+0xa1/0x180 linux/drivers/gpu/drm/qxl/qxl_gem.c:89
qxl_mode_dumb_create+0x1cd/0x400 linux/drivers/gpu/drm/qxl/qxl_dumb.c:63
drm_mode_create_dumb linux/drivers/gpu/drm/drm_dumb_buffers.c:96
drm_mode_create_dumb_ioctl+0x1f5/0x2d0 linux/drivers/gpu/drm/drm_dumb_buffers.c:102
drm_ioctl_kernel+0x21d/0x430 linux/drivers/gpu/drm/drm_ioctl.c:788
drm_ioctl+0x56f/0xcc0 linux/drivers/gpu/drm/drm_ioctl.c:891
vfs_ioctl linux/fs/ioctl.c:51
__do_sys_ioctl linux/fs/ioctl.c:870
__se_sys_ioctl linux/fs/ioctl.c:856
__x64_sys_ioctl+0x13d/0x1c0 linux/fs/ioctl.c:856
do_syscall_x64 linux/arch/x86/entry/common.c:50
do_syscall_64+0x5b/0x90 linux/arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc linux/arch/x86/entry/entry_64.S:120
Freed by task 515:
kasan_save_stack+0x38/0x70 linux/mm/kasan/common.c:45
kasan_set_track+0x25/0x40 linux/mm/kasan/common.c:52
kasan_save_free_info+0x2e/0x60 linux/mm/kasan/generic.c:521
____kasan_slab_free linux/mm/kasan/common.c:236
____kasan_slab_free+0x180/0x1f0 linux/mm/kasan/common.c:200
__kasan_slab_free+0x12/0x30 linux/mm/kasan/common.c:244
kasan_slab_free linux/./include/linux/kasan.h:162
slab_free_hook linux/mm/slub.c:1781
slab_free_freelist_hook+0xd2/0x1a0 linux/mm/slub.c:1807
slab_free linux/mm/slub.c:3787
__kmem_cache_free+0x196/0x2d0 linux/mm/slub.c:3800
kfree+0x78/0x120 linux/mm/slab_common.c:1019
qxl_ttm_bo_destroy+0x140/0x1a0 linux/drivers/gpu/drm/qxl/qxl_object.c:49
ttm_bo_release+0x678/0xa30 linux/drivers/gpu/drm/ttm/ttm_bo.c:381
kref_put linux/./include/linux/kref.h:65
ttm_bo_put+0x50/0x80 linux/drivers/gpu/drm/ttm/ttm_bo.c:393
qxl_gem_object_free+0x3e/0x60 linux/drivers/gpu/drm/qxl/qxl_gem.c:42
drm_gem_object_free+0x5c/0x90 linux/drivers/gpu/drm/drm_gem.c:974
kref_put linux/./include/linux/kref.h:65
__drm_gem_object_put linux/./include/drm/drm_gem.h:431
drm_gem_object_put linux/./include/drm/drm_gem.h:444
qxl_gem_object_create_with_handle+0x151/0x180 linux/drivers/gpu/drm/qxl/qxl_gem.c:100
qxl_mode_dumb_create+0x1cd/0x400 linux/drivers/gpu/drm/qxl/qxl_dumb.c:63
drm_mode_create_dumb linux/drivers/gpu/drm/drm_dumb_buffers.c:96
drm_mode_create_dumb_ioctl+0x1f5/0x2d0 linux/drivers/gpu/drm/drm_dumb_buffers.c:102
drm_ioctl_kernel+0x21d/0x430 linux/drivers/gpu/drm/drm_ioctl.c:788
drm_ioctl+0x56f/0xcc0 linux/drivers/gpu/drm/drm_ioctl.c:891
vfs_ioctl linux/fs/ioctl.c:51
__do_sys_ioctl linux/fs/ioctl.c:870
__se_sys_ioctl linux/fs/ioctl.c:856
__x64_sys_ioctl+0x13d/0x1c0 linux/fs/ioctl.c:856
do_syscall_x64 linux/arch/x86/entry/common.c:50
do_syscall_64+0x5b/0x90 linux/arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc linux/arch/x86/entry/entry_64.S:120
The buggy address belongs to the object at
ffff88801136c000
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 576 bytes inside of
freed 1024-byte region [
ffff88801136c000,
ffff88801136c400)
The buggy address belongs to the physical page:
page:
0000000089fc329b refcount:1 mapcount:0 mapping:
0000000000000000 index:0x0 pfn:0x11368
head:
0000000089fc329b order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0xfffffc0010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff)
raw:
000fffffc0010200 ffff888007841dc0 dead000000000122 0000000000000000
raw:
0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88801136c100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88801136c180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>
ffff88801136c200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88801136c280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88801136c300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Disabling lock debugging due to kernel taint
Instead of returning a weak reference to the qxl_bo object, return the
created drm_gem_object and let the caller decrement the reference count
when it no longer needs it. As a convenience, if the caller is not
interested in the gobj object, it can pass NULL to the parameter and the
reference counting is descremented internally.
The bug and the reproducer were originally found by the Zero Day Initiative project (ZDI-CAN-20940).
Link: https://www.zerodayinitiative.com/
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230814165119.90847-1-wander@redhat.com
Dave Airlie [Thu, 17 Aug 2023 20:09:21 +0000 (06:09 +1000)]
Merge tag 'amd-drm-fixes-6.5-2023-08-16' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.5-2023-08-16:
amdgpu:
- SMU 13.x fixes
- Fix mcbp parameter for gfx9
- SMU 11.x fixes
- Temporary fix for large numbers of XCP partitions
- S0ix fixes
- DCN 2.0 fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230816200226.10771-1-alexander.deucher@amd.com
Dave Airlie [Thu, 17 Aug 2023 20:08:54 +0000 (06:08 +1000)]
Merge tag 'drm-misc-fixes-2023-08-17' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
One EPROBE_DEFER handling fix for the JDI LT070ME05000, a timing fix for
the AUO G121EAN01 panel, an integer overflow and a memory leak fixes for
the qaic accel, a use-after-free fix for nouveau and a revert for an
alleged fix in EDID parsing.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3olqt33em5uhxzjbqghwcwnvmw73h7bxkbdxookmnkecymd4vc@7ogm6gewpprq
Dave Airlie [Thu, 17 Aug 2023 20:07:59 +0000 (06:07 +1000)]
Merge tag 'drm-intel-fixes-2023-08-17' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix the flow for ignoring GuC SLPC efficient frequency selection (Vinay)
- Fix SDVO panel_type initialization (Jani)
- Fix display probe for IVB Q and IVB D GT2 server (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZN4yduyBU1Ev9dc7@intel.com
Jakub Kicinski [Thu, 17 Aug 2023 18:56:44 +0000 (11:56 -0700)]
Merge tag 'mlx5-fixes-2023-08-16' of git://git./linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2023-08-16
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2023-08-16' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Fix mlx5_cmd_update_root_ft() error flow
net/mlx5e: XDP, Fix fifo overrun on XDP_REDIRECT
====================
Link: https://lore.kernel.org/r/20230816204108.53819-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marcin Szycik [Wed, 16 Aug 2023 19:34:05 +0000 (12:34 -0700)]
ice: Block switchdev mode when ADQ is active and vice versa
ADQ and switchdev are not supported simultaneously. Enabling both at the
same time can result in nullptr dereference.
To prevent this, check if ADQ is active when changing devlink mode to
switchdev mode, and check if switchdev is active when enabling ADQ.
Fixes:
fbc7b27af0f9 ("ice: enable ndo_setup_tc support for mqprio_qdisc")
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230816193405.1307580-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Manish Chopra [Wed, 16 Aug 2023 15:07:11 +0000 (20:37 +0530)]
qede: fix firmware halt over suspend and resume
While performing certain power-off sequences, PCI drivers are
called to suspend and resume their underlying devices through
PCI PM (power management) interface. However this NIC hardware
does not support PCI PM suspend/resume operations so system wide
suspend/resume leads to bad MFW (management firmware) state which
causes various follow-up errors in driver when communicating with
the device/firmware afterwards.
To fix this driver implements PCI PM suspend handler to indicate
unsupported operation to the PCI subsystem explicitly, thus avoiding
system to go into suspended/standby mode.
Without this fix device/firmware does not recover unless system
is power cycled.
Fixes:
2950219d87b0 ("qede: Add basic network device support")
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Alok Prasad <palok@marvell.com>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230816150711.59035-1-manishc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Wed, 16 Aug 2023 14:21:58 +0000 (14:21 +0000)]
net: do not allow gso_size to be set to GSO_BY_FRAGS
One missing check in virtio_net_hdr_to_skb() allowed
syzbot to crash kernels again [1]
Do not allow gso_size to be set to GSO_BY_FRAGS (0xffff),
because this magic value is used by the kernel.
[1]
general protection fault, probably for non-canonical address 0xdffffc000000000e: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077]
CPU: 0 PID: 5039 Comm: syz-executor401 Not tainted 6.5.0-rc5-next-
20230809-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
RIP: 0010:skb_segment+0x1a52/0x3ef0 net/core/skbuff.c:4500
Code: 00 00 00 e9 ab eb ff ff e8 6b 96 5d f9 48 8b 84 24 00 01 00 00 48 8d 78 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e ea 21 00 00 48 8b 84 24 00 01
RSP: 0018:
ffffc90003d3f1c8 EFLAGS:
00010202
RAX:
dffffc0000000000 RBX:
000000000001fffe RCX:
0000000000000000
RDX:
000000000000000e RSI:
ffffffff882a3115 RDI:
0000000000000070
RBP:
ffffc90003d3f378 R08:
0000000000000005 R09:
000000000000ffff
R10:
000000000000ffff R11:
5ee4a93e456187d6 R12:
000000000001ffc6
R13:
dffffc0000000000 R14:
0000000000000008 R15:
000000000000ffff
FS:
00005555563f2380(0000) GS:
ffff8880b9800000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000020020000 CR3:
000000001626d000 CR4:
00000000003506f0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
<TASK>
udp6_ufo_fragment+0x9d2/0xd50 net/ipv6/udp_offload.c:109
ipv6_gso_segment+0x5c4/0x17b0 net/ipv6/ip6_offload.c:120
skb_mac_gso_segment+0x292/0x610 net/core/gso.c:53
__skb_gso_segment+0x339/0x710 net/core/gso.c:124
skb_gso_segment include/net/gso.h:83 [inline]
validate_xmit_skb+0x3a5/0xf10 net/core/dev.c:3625
__dev_queue_xmit+0x8f0/0x3d60 net/core/dev.c:4329
dev_queue_xmit include/linux/netdevice.h:3082 [inline]
packet_xmit+0x257/0x380 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3087 [inline]
packet_sendmsg+0x24c7/0x5570 net/packet/af_packet.c:3119
sock_sendmsg_nosec net/socket.c:727 [inline]
sock_sendmsg+0xd9/0x180 net/socket.c:750
____sys_sendmsg+0x6ac/0x940 net/socket.c:2496
___sys_sendmsg+0x135/0x1d0 net/socket.c:2550
__sys_sendmsg+0x117/0x1e0 net/socket.c:2579
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7ff27cdb34d9
Fixes:
3953c46c3ac7 ("sk_buff: allow segmenting based on frag sizes")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Xin Long <lucien.xin@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230816142158.1779798-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Abel Wu [Wed, 16 Aug 2023 09:12:22 +0000 (17:12 +0800)]
sock: Fix misuse of sk_under_memory_pressure()
The status of global socket memory pressure is updated when:
a) __sk_mem_raise_allocated():
enter: sk_memory_allocated(sk) > sysctl_mem[1]
leave: sk_memory_allocated(sk) <= sysctl_mem[0]
b) __sk_mem_reduce_allocated():
leave: sk_under_memory_pressure(sk) &&
sk_memory_allocated(sk) < sysctl_mem[0]
So the conditions of leaving global pressure are inconstant, which
may lead to the situation that one pressured net-memcg prevents the
global pressure from being cleared when there is indeed no global
pressure, thus the global constrains are still in effect unexpectedly
on the other sockets.
This patch fixes this by ignoring the net-memcg's pressure when
deciding whether should leave global memory pressure.
Fixes:
e1aab161e013 ("socket: initial cgroup code.")
Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Link: https://lore.kernel.org/r/20230816091226.1542-1-wuyun.abel@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Edward Cree [Tue, 15 Aug 2023 15:57:28 +0000 (16:57 +0100)]
sfc: don't fail probe if MAE/TC setup fails
Existing comment in the source explains why we don't want efx_init_tc()
failure to be fatal. Cited commit erroneously consolidated failure
paths causing the probe to be failed in this case.
Fixes:
7e056e2360d9 ("sfc: obtain device mac address based on firmware handle for ef100")
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/aa7f589dd6028bd1ad49f0a85f37ab33c09b2b45.1692114888.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>