OSDN Git Service
Greg Kurz [Wed, 11 Jan 2017 08:49:32 +0000 (09:49 +0100)]
libqtest: handle zero length memwrite/memread
Some recently added tests pass a zero length to qtest_memwrite().
Unfortunately, the qtest protocol doesn't implement an on-the-wire
syntax for zero-length writes and the current code happily sends
garbage to QEMU. This causes intermittent failures.
It isn't worth the pain to enhance the protocol, so this patch
simply fixes the issue by "just return, doing nothing". The same
fix is applied to qtest_memread() since the issue also exists in
the QEMU part of the "memread" command.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id:
148412457273.22750.
983275587432075569.stgit@bahia
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 10 Jan 2017 14:52:34 +0000 (14:52 +0000)]
Merge remote-tracking branch 'remotes/kraxel/tags/pull-ui-
20170110-1' into staging
gtk,vnc: misc bugfixes.
kbd: add jp keys, fix ps2 regressions.
sdl: export window id for baum, remove sdl hooks from baum.
egl: egl-helpers.c license change.
# gpg: Signature made Tue 10 Jan 2017 07:16:05 GMT
# gpg: using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* remotes/kraxel/tags/pull-ui-
20170110-1:
ps2: Fix lost scancodes by recent changes
curses: Fix compiler warnings (Mingw-w64 redefinition of macro KEY_EVENT)
ui/vnc: Fix problem with sending too many bytes as server name
gtk: avoid oob array access
egl-helpers: Change file licensing to LGPLv2
sdl2: set window ID
console: move window ID code from baum to sdl
console: add API to get underlying gui window ID
ui: use evdev keymap when running under wayland
ui/gtk: fix crash at startup when no console is available
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 10 Jan 2017 10:46:21 +0000 (10:46 +0000)]
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, vhost, pc: fixes, features
beginnings of iotlb support for vhost
acpi hotplug rework
vhost net tx flush on link down
passing mtu to guests
hotplug for virtio crypto
fixes and cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 10 Jan 2017 05:37:48 GMT
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (41 commits)
acpi-test: update expected files
memhp: move DIMM devices into dedicated scope with related common methods
memhp: don't generate memory hotplug AML if it's not enabled/supported
memhp: move memory hotplug only defines to memory_hotplug.c
memhp: move GPE handler_E03 into build_memory_hotplug_aml()
memhp: merge build_memory_devices() into build_memory_hotplug_aml()
memhp: consolidate scattered MHPD device declaration
memhp: move build_memory_devices() into memory_hotplug.c
memhp: move build_memory_hotplug_aml() into memory_hotplug.c
tests: pc: add memory hotplug acpi tables tests
virtio-net: Add MTU feature support
vhost-net: Notify the backend about the host MTU
vhost-user: Add MTU protocol feature and op
net: virtio-net discards TX data after link down
virtio: Introduce virtqueue_drop_all procedure
net: vhost stop updates virtio queue state
net: Add virtio queue interface to update used index from vring state
balloon: Don't balloon roms
virtio: fix vq->inuse recalc after migr
pcie_aer: support configurable AER capa version
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
OGAWA Hirofumi [Tue, 27 Dec 2016 19:55:51 +0000 (04:55 +0900)]
ps2: Fix lost scancodes by recent changes
With "ps2: use QEMU qcodes instead of scancodes", key handling was
changed to qcode base. But all scancodes are not converted to new one.
This adds some missing qcodes/scancodes what I found in using.
[set1 and set3 are from <hpoussin@reactos.org>]
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Stefan Weil [Sat, 19 Nov 2016 18:53:18 +0000 (19:53 +0100)]
curses: Fix compiler warnings (Mingw-w64 redefinition of macro KEY_EVENT)
For builds with Mingw-w64 as it is included in Cygwin, there are two
header files which define KEY_EVENT with different values.
This results in lots of compiler warnings like this one:
CC vl.o
In file included from /qemu/include/ui/console.h:340:0,
from /qemu/vl.c:76:
/usr/i686-w64-mingw32/sys-root/mingw/include/curses.h:1522:0: warning: "KEY_EVENT" redefined
#define KEY_EVENT 0633 /* We were interrupted by an event */
In file included from /usr/share/mingw-w64/include/windows.h:74:0,
from /usr/share/mingw-w64/include/winsock2.h:23,
from /qemu/include/sysemu/os-win32.h:29,
from /qemu/include/qemu/osdep.h:100,
from /qemu/vl.c:24:
/usr/share/mingw-w64/include/wincon.h:101:0: note: this is the location of the previous definition
#define KEY_EVENT 0x1
QEMU only uses the KEY_EVENT macro from wincon.h.
Therefore we can undefine the macro coming from curses.h.
The explicit include statement for curses.h in ui/curses.c is not needed
and was removed.
Those two modifications fix the redefinition warnings.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-id:
20161119185318.10564-1-sw@weilnetz.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Thomas Huth [Mon, 21 Nov 2016 17:25:15 +0000 (18:25 +0100)]
ui/vnc: Fix problem with sending too many bytes as server name
If the buffer is not big enough, snprintf() does not return the number
of bytes that have been written to the buffer, but the number of bytes
that would be needed for writing the whole string. By using this value
for the following vnc_write() calls, we send some junk at the end of
the name in case the qemu_name is longer than 1017 bytes, which could
confuse the VNC clients. Fix this by adding an additional size check
here.
Buglink: https://bugs.launchpad.net/qemu/+bug/1637447
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id:
1479749115-21932-1-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Marc-André Lureau [Wed, 7 Dec 2016 10:55:11 +0000 (13:55 +0300)]
gtk: avoid oob array access
When too many consoles are created, vcs[] may be write out-of-bounds.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id:
20161207105511.25173-1-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Frediano Ziglio [Thu, 8 Dec 2016 10:45:39 +0000 (10:45 +0000)]
egl-helpers: Change file licensing to LGPLv2
The relicense permits sharing the code with Spice which
is LGPL.
All people listed below have agreed to the
relicense:
- Arei Gonglei;
- Cole Robinson;
- Gerd Hoffmann;
- Peter Maydell.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Cole Robinson <crobinso@redhat.com>
Acked-by: Gonglei <arei.gonglei@huawei.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Message-id:
20161208104539.3045-1-fziglio@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Samuel Thibault [Wed, 21 Dec 2016 00:38:06 +0000 (01:38 +0100)]
sdl2: set window ID
This uses the console API to record the window ID of the SDL2 windows.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-id:
20161221003806.22412-4-samuel.thibault@ens-lyon.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Samuel Thibault [Wed, 21 Dec 2016 00:38:05 +0000 (01:38 +0100)]
console: move window ID code from baum to sdl
This moves the SDL bits for window ID from the baum driver to SDL, as
well as fixing the build for non-X11.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-id:
20161221003806.22412-3-samuel.thibault@ens-lyon.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Samuel Thibault [Wed, 21 Dec 2016 00:38:04 +0000 (01:38 +0100)]
console: add API to get underlying gui window ID
This adds two console functions, qemu_console_set_window_id and
qemu_graphic_console_get_window_id, to let graphical backend record the
window id in the QemuConsole structure, and let the baum driver read it.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-id:
20161221003806.22412-2-samuel.thibault@ens-lyon.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Daniel P. Berrange [Thu, 1 Dec 2016 09:41:17 +0000 (09:41 +0000)]
ui: use evdev keymap when running under wayland
Wayland always uses evdev as its input source, so QEMU
can use the existing evdev keymap data
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Tested-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id:
20161201094117.16407-1-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Hervé Poussineau [Sun, 1 Jan 2017 09:39:45 +0000 (10:39 +0100)]
ui/gtk: fix crash at startup when no console is available
This patch fixes a segfault at QEMU startup, introduced in
a08156321ab9a7d2fed9ee77dbfeea2a61ffd153.
gd_vc_find_current() return NULL, which is dereferenced without checking it.
While at it, disable the whole 'View' menu if no console exists.
Reproducer: qemu-system-i386 -M none -nodefaults
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id:
1483263585-8101-1-git-send-email-hpoussin@reactos.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Michael S. Tsirkin [Tue, 10 Jan 2017 05:06:42 +0000 (07:06 +0200)]
acpi-test: update expected files
clean up warnings after latest hotplug changes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 5 Dec 2016 23:32:29 +0000 (00:32 +0100)]
memhp: move DIMM devices into dedicated scope with related common methods
Move DIMM devices from global _SB scope to a new \_SB.MHPC
container along with common methods used by DIMMs:
MCRS, MRST, MPXM, MOST, MEJ00, MSCN, MTFY
this reduces AML size on 12 * #slots bytes,
i.e. up to 3072 bytes for 265 slots.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Igor Mammedov [Mon, 5 Dec 2016 23:32:28 +0000 (00:32 +0100)]
memhp: don't generate memory hotplug AML if it's not enabled/supported
That reduces DSDT by 910 bytes when memory hotplug
isn't enabled.
While doing so drop intermediate variables/arguments
passing around ACPI_MEMORY_HOTPLUG_IO_LEN and making
it local to memory_hotplug.c, hardcoding it there as
it can't change.
Also don't pass around ACPI_MEMORY_HOTPLUG_BASE through
intermediate variables/arguments where it's not needed.
Instead initialize in module static variable when MMIO
region is mapped and use that within memory_hotplug.c
whenever it's required.
That way MMIO base specified only at one place and AML
with MMIO would always use the same value.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Igor Mammedov [Mon, 5 Dec 2016 23:32:27 +0000 (00:32 +0100)]
memhp: move memory hotplug only defines to memory_hotplug.c
Move defines used locally only by memory_hotplug.c into it
from header files.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Igor Mammedov [Mon, 5 Dec 2016 23:32:26 +0000 (00:32 +0100)]
memhp: move GPE handler_E03 into build_memory_hotplug_aml()
>From this patch all the memory hotplug related AML
bits are consolidated in one place within DSTD.
Follow up patches will utilize that to simplify
memory hotplug related C/AML code.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Igor Mammedov [Mon, 5 Dec 2016 23:32:25 +0000 (00:32 +0100)]
memhp: merge build_memory_devices() into build_memory_hotplug_aml()
It consolidates memory hotplug AML in one place within DSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 5 Dec 2016 23:32:24 +0000 (00:32 +0100)]
memhp: consolidate scattered MHPD device declaration
since static and dynamic parts of memory MHPD device are now
in the same table (DSDT), there is no point keeping
them scattered across the table, so consolidate it
in one place.
There aren't any functional change, only AML text movement
from externally refferenced MHPD scope directly into
MHPD device declaration.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Igor Mammedov [Mon, 5 Dec 2016 23:32:23 +0000 (00:32 +0100)]
memhp: move build_memory_devices() into memory_hotplug.c
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Igor Mammedov [Mon, 5 Dec 2016 23:32:22 +0000 (00:32 +0100)]
memhp: move build_memory_hotplug_aml() into memory_hotplug.c
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Igor Mammedov [Mon, 5 Dec 2016 23:32:20 +0000 (00:32 +0100)]
tests: pc: add memory hotplug acpi tables tests
This also adds SRAT and DSDT blobs for memory hotplug variant
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Maxime Coquelin [Sat, 10 Dec 2016 15:30:38 +0000 (16:30 +0100)]
virtio-net: Add MTU feature support
This patch allows advising guest with host MTU's by setting
host_mtu parameter.
If VIRTIO_NET_F_MTU has been successfully negotiated, MTU
value is passed to the backend.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Aaron Conole <aconole@redhat.com
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Maxime Coquelin [Sat, 10 Dec 2016 15:30:37 +0000 (16:30 +0100)]
vhost-net: Notify the backend about the host MTU
This patch provides a way for virtio-net to notify the
backend about the host MTU set by the user.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Aaron Conole <aconole@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Maxime Coquelin [Sat, 10 Dec 2016 15:30:36 +0000 (16:30 +0100)]
vhost-user: Add MTU protocol feature and op
This patch implements VHOST_USER_PROTOCOL_F_NET_MTU
protocol feature and VHOST_USER_NET_SET_MTU request so
that the backend gets notified of the user defined host
MTU.
If backend supports VHOST_USER_PROTOCOL_F_REPLY_ACK,
QEMU assumes MTU is valid if success is returned.
Vhost-net driver sends this request through a new
vhost_net_set_mtu vhost_ops entry.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Aaron Conole <aconole@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Yuri Benditovich [Tue, 13 Dec 2016 08:12:08 +0000 (10:12 +0200)]
net: virtio-net discards TX data after link down
https://bugzilla.redhat.com/show_bug.cgi?id=
1295637
Upon set_link monitor command or upon netdev deletion
virtio-net sends link down indication to the guest
and stops vhost if one is used.
Guest driver can still submit data for TX until it
recognizes link loss. If these packets not returned by
the host, the Windows guest will never be able to finish
disable/removal/shutdown.
Now each packet sent by guest after NIC indicated link
down will be completed immediately.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Yuri Benditovich [Tue, 13 Dec 2016 08:12:07 +0000 (10:12 +0200)]
virtio: Introduce virtqueue_drop_all procedure
Add procedure for fast drop of queued packets, acting like
pop and push without mapping the buffers into memory.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Yuri Benditovich [Tue, 13 Dec 2016 08:12:06 +0000 (10:12 +0200)]
net: vhost stop updates virtio queue state
Make virtio queue suitable for push operation from qemu
after vhost was stopped.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Yuri Benditovich [Tue, 13 Dec 2016 08:12:05 +0000 (10:12 +0200)]
net: Add virtio queue interface to update used index from vring state
Bring virtio queue to correct internal state for host-to-guest
operations when vhost is temporary stopped.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Dr. David Alan Gilbert [Fri, 16 Dec 2016 11:41:55 +0000 (11:41 +0000)]
balloon: Don't balloon roms
A broken guest can specify physical addresses that correspond
to any memory region, but it shouldn't be able to change ROM.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: qemu-stable@nongnu.org
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Halil Pasic [Mon, 19 Dec 2016 15:44:44 +0000 (16:44 +0100)]
virtio: fix vq->inuse recalc after migr
Correct recalculation of vq->inuse after migration for the corner case
where the avail_idx has already wrapped but used_idx not yet.
Also change the type of the VirtQueue.inuse to unsigned int. This is
done to be consistent with other members representing sizes (VRing.num),
and because C99 guarantees max ring size < UINT_MAX but does not
guarantee max ring size < INT_MAX.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Fixes:
bccdef6b ("virtio: recalculate vq->inuse after migration")
CC: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Dou Liyang [Wed, 21 Dec 2016 08:21:31 +0000 (16:21 +0800)]
pcie_aer: support configurable AER capa version
Now, AER capa version is fixed to v2, if assigned device isn't v2,
then this value will be inconsistent between guest and host
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cao jin [Wed, 21 Dec 2016 08:21:30 +0000 (16:21 +0800)]
pcie_aer: Convert pcie_aer_init to Error
When user specify invalid value for property aer_log_max, device should
fail to create, and report appropriate message.
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Dmitry Fleytman <dmitry@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Gonglei [Thu, 22 Dec 2016 03:01:28 +0000 (11:01 +0800)]
virtio-crypto: zeroize the key material before free
Common practice with sensitive information (key material, passwords,
etc). Prevents sensitive information from being exposed by accident later in
coredumps, memory disclosure bugs when heap memory is reused, etc.
Sensitive information is sometimes also held in mlocked pages to prevent
it being swapped to disk but that's not being done here.
Let's zeroize the memory of CryptoDevBackendSymOpInfo structure pointed
for key material security.
[Thanks to Stefan for help with crafting the commit message]
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Gonglei [Thu, 22 Dec 2016 03:12:42 +0000 (11:12 +0800)]
virtio-crypto-pci: tag virtio-crypto device hot pluggable
After resolving the relationship with cryptodev backend,
the virtio crypto device supports hotplug now.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Gonglei [Thu, 22 Dec 2016 03:12:41 +0000 (11:12 +0800)]
virtio-crypto: avoid one cryptodev device is used by multiple virtio crypto devices
Add the check condition for cryptodev device in order
to avoid one cryptodev device is used by multiple
virtio crypto devices.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Gonglei [Thu, 22 Dec 2016 03:12:40 +0000 (11:12 +0800)]
virtio-crypto-pci: add check for cryptodev object
We must assure each virtio crypto pci device has
an vaild cryptodev backend object.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Gonglei [Thu, 22 Dec 2016 03:12:39 +0000 (11:12 +0800)]
cryptodev: wrap the ready flag
The ready flag should be set by the children of
cryptodev backend interface. Warp the setter/getter
functions for it.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Gonglei [Thu, 22 Dec 2016 03:12:38 +0000 (11:12 +0800)]
cryptodev: introduce a new is_used property
This property is used to Tag the cryptodev backend
is used by virtio-crypto or not. Making cryptodev
can't be hot unplugged when it's in use. Cleanup
resources when cryptodev is finalized.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Gonglei [Thu, 22 Dec 2016 03:37:03 +0000 (11:37 +0800)]
virtio-crypto: use the correct length for cipher operation
In some modes of cipher algorithms, the length of destination data
maybe larger then source data, such as ciphertext stealing (CTS).
For symmetric algorithms, the length of ciphertext is definitly
equal to the plaintext for each crypto operation. So we should
use the src_len instead of dst_len avoid to pass the incorrect
cryptographical results to the frontend driver.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cao jin [Thu, 29 Dec 2016 01:19:37 +0000 (09:19 +0800)]
doc/pcie: correct command line examples
Nit picking: Multi-function PCI Express Root Ports should mean that
'addr' property is mandatory, and slot is optional because it defaults
to 0, and 'chassis' is mandatory for 2nd & 3rd root port because it
defaults to 0 too.
Bonus: fix a typo(2->3)
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jason Wang [Fri, 30 Dec 2016 10:09:18 +0000 (18:09 +0800)]
memory: handle alias in memory_region_is_iommu()
Cc: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Jason Wang [Fri, 30 Dec 2016 10:09:17 +0000 (18:09 +0800)]
memory: handle alias for iommu notifier
Cc: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Jason Wang [Fri, 30 Dec 2016 10:09:16 +0000 (18:09 +0800)]
acpi: add ATSR for q35
This patch provides ATSR which was a requirement for software that
wants to enable ATS on endpoint devices behind a Root Port. This is
done simply by setting ALL_PORTS which indicates all PCI-Express Root
Ports support ATS transactions.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jason Wang [Fri, 30 Dec 2016 10:09:15 +0000 (18:09 +0800)]
virtio-pci: address space translation service (ATS) support
This patches enable the Address Translation Service support for virtio
pci devices. This is needed for a guest visible Device IOTLB
implementation and will be required by vhost device IOTLB API
implementation for intel IOMMU.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jason Wang [Fri, 30 Dec 2016 10:09:14 +0000 (18:09 +0800)]
intel_iommu: support device iotlb descriptor
This patch enables device IOTLB support for intel iommu. The major
work is to implement QI device IOTLB descriptor processing and notify
the device through iommu notifier.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Jason Wang [Fri, 30 Dec 2016 10:09:13 +0000 (18:09 +0800)]
exec: introduce address_space_get_iotlb_entry()
This patch introduces a helper to query the iotlb entry for a
possible iova. This will be used by later device IOTLB API to enable
the capability for a dataplane (e.g vhost) to query the IOTLB.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jason Wang [Fri, 30 Dec 2016 10:09:12 +0000 (18:09 +0800)]
intel_iommu: allocate new key when creating new address space
We use the pointer to stack for key for new address space, this will break hash
table searching, fixing by g_malloc() a new key instead.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jason Wang [Fri, 30 Dec 2016 10:09:11 +0000 (18:09 +0800)]
intel_iommu: name vtd address space with devfn
To avoid duplicated name and ease debugging.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jason Wang [Fri, 30 Dec 2016 10:09:10 +0000 (18:09 +0800)]
virtio: convert to use DMA api
Currently, all virtio devices bypass IOMMU completely. This is because
address_space_memory is assumed and used during DMA emulation. This
patch converts the virtio core API to use DMA API. This idea is
- introducing a new transport specific helper to query the dma address
space. (only pci version is implemented).
- query and use this address space during virtio device guest memory
accessing when iommu platform (VIRTIO_F_IOMMU_PLATFORM) was enabled
for this device.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Amit Shah <amit.shah@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Gonglei [Tue, 3 Jan 2017 06:50:03 +0000 (14:50 +0800)]
virtio-crypto: fix possible integer and heap overflow
Because the 'size_t' type is 4 bytes in 32-bit platform, which
is the same with 'int'. It's easy to make 'max_len' to zero when
integer overflow and then cause heap overflow if 'max_len' is zero.
Using uint_64 instead of size_t to avoid the integer overflow.
Cc: qemu-stable@nongnu.org
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Tested-by: Li Qiang <liqiang6-s@360.cn>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Peter Xu [Fri, 6 Jan 2017 04:06:13 +0000 (12:06 +0800)]
intel_iommu: allow migration
IOMMU needs to be migrated before all the PCI devices (in case there are
devices that will request for address translation). So marking it with a
priority higher than the default (which PCI devices and other belong).
Migration framework handled the rest.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Peter Xu [Fri, 6 Jan 2017 04:06:12 +0000 (12:06 +0800)]
migration: allow to prioritize save state entries
During migration, save state entries are saved/loaded without a specific
order - we just traverse the savevm_state.handlers list and do it one by
one. This might not be enough.
There are requirements that we need to load specific device's vmstate
first before others. For example, VT-d IOMMU contains DMA address
remapping information, which is required by all the PCI devices to do
address translations. We need to make sure IOMMU's device state is
loaded before the rest of the PCI devices, so that DMA address
translation can work properly.
This patch provide a VMStateDescription.priority value to allow specify
the priority of the saved states. The loadvm operation will be done with
those devices with higher vmsd priority.
Before this patch, we are possibly achieving the ordering requirement by
an assumption that the ordering will be the same with the ordering that
objects are created. A better way is to mark it out explicitly in the
VMStateDescription table, like what this patch does.
Current ordering logic is still naive and slow, but after all that's not
a critical path so IMO it's a workable solution for now.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Peter Maydell [Mon, 9 Jan 2017 19:07:12 +0000 (19:07 +0000)]
Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-
20170108' into staging
TCG host support for mips64
# gpg: Signature made Sun 08 Jan 2017 17:52:17 GMT
# gpg: using RSA key 0xAD1270CC4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg: aka "Richard Henderson <rth@redhat.com>"
# gpg: aka "Richard Henderson <rth@twiddle.net>"
# Primary key fingerprint: 9CB1 8DDA F8E8 49AD 2AFC 16A4 AD12 70CC 4DD0 279B
* remotes/rth/tags/pull-tcg-
20170108:
translate-all: Avoid -Werror=switch-bool
tcg-mips: Adjust qemu_ld/st for mips64
tcg-mips: Adjust calling conventions for mips64
tcg-mips: Add tcg unwind info
tcg-mips: Adjust prologue for mips64
tcg-mips: Adjust load/store functions for mips64
tcg-mips: Adjust move functions for mips64
tcg-mips: Add bswap32u and bswap64
tcg-mips: Support 64-bit opcodes
tcg-mips: Add mips64 opcodes
tcg-mips: Move bswap code to a subroutine
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 9 Jan 2017 15:30:45 +0000 (15:30 +0000)]
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, vhost, pc: fixes
Here are some bugfixes that didn't make 2.8.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 16 Dec 2016 21:13:43 GMT
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
virtio: avoid using guest_notifier_mask in vhost-user mode
pci: fix error message for express slots
i386: amd_iommu: fix MMIO register count and access
tests/vhost-user-bridge: use contrib/libvhost-user
contrib: add libvhost-user
tests/vhost-user-bridge: do not accept more than one connection
tests/vhost-user-bridge: indicate peer disconnected
tests/vhost-user-bridge: remove unnecessary dispatcher_remove
tests/vhost-user-bridge: remove false comment
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 9 Jan 2017 13:54:31 +0000 (13:54 +0000)]
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Mon 09 Jan 2017 13:43:44 GMT
# gpg: using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
block: Rename raw-{posix,win32} to file-*.c
block: Rename raw_bsd to raw-format.c
blkverify: Implement bdrv_co_preadv/pwritev/flush
blkdebug: Implement bdrv_co_preadv/pwritev/flush
quorum: Clean up quorum_aio_get()
quorum: Inline quorum_fifo_aio_cb()
quorum: Implement .bdrv_co_preadv/pwritev()
quorum: Avoid bdrv_aio_writev() for rewrites
quorum: Inline quorum_aio_cb()
quorum: Do cleanup in caller coroutine
quorum: Implement .bdrv_co_readv/writev
quorum: Remove s from quorum_aio_get() arguments
coroutine: Introduce qemu_coroutine_enter_if_inactive()
qemu-img: fix in-flight count for qemu-img bench
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Eric Blake [Fri, 2 Dec 2016 19:48:54 +0000 (13:48 -0600)]
block: Rename raw-{posix,win32} to file-*.c
These files deal with the file protocol, not the raw format (the
file protocol is often used with other formats, and the raw
format is not forced to use the file protocol). Rename things
to make it a bit easier to follow.
Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Eric Blake [Fri, 2 Dec 2016 19:48:53 +0000 (13:48 -0600)]
block: Rename raw_bsd to raw-format.c
Given that we have raw-win32.c and raw-posix.c, my initial guess at
raw_bsd.c was that it was for dealing with raw files using code
specific to the BSD operating system (beyond what raw-posix could
do). Not so - this name was chosen back in commit
e1c66c6 to
distinguish that it was a BSD licensed file, in contrast to the
then-existing raw.c with an unclear and potentially unusable
license. But since it has been more than three years since the
rewrite, it's time to pick a more useful name for this file to
avoid this type of confusion to future contributors that don't know
the backstory, as none of our other files are named solely by the
license they use.
In reality, this file deals with the raw format, which is useful
with any number of protocols, while raw-{win32,posix} deal with
the file protocol (and in turn, that protocol is not limited to
use with the raw format). So rename raw_bsd to raw-format.c. We
could have also used the shorter name raw.c, except that collides
with the earlier use of that filename for a different license,
and it's better to be safe than risk license pollution.
The next patch will also rename raw-win32.c and raw-posix.c to
further distinguish the difference in roles.
It doesn't hurt that this gets rid of an underscore in the filename,
thereby making tab-completion on 'ra<TAB>' easier (now I don't have
to type the shift key, which slows things down :)
Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Fri, 4 Nov 2016 20:13:45 +0000 (21:13 +0100)]
blkverify: Implement bdrv_co_preadv/pwritev/flush
This enables byte granularity requests for blkverify, and at the same
time gets us rid of another user of the BDS-level AIO emulation.
The reference output of a test case must be changed because the
verification failure message reports byte offsets instead of sectors
now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Kevin Wolf [Fri, 4 Nov 2016 20:13:45 +0000 (21:13 +0100)]
blkdebug: Implement bdrv_co_preadv/pwritev/flush
This enables byte granularity requests for blkdebug, and at the same
time gets us rid of another user of the BDS-level AIO emulation.
Note that unless align=512 is specified, this can behave subtly
different from the old behaviour because bdrv_co_preadv/pwritev don't
have to perform alignment adjustments any more.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Kevin Wolf [Tue, 22 Nov 2016 11:49:49 +0000 (12:49 +0100)]
quorum: Clean up quorum_aio_get()
Make sure that all fields of the new QuorumAIOCB are zeroed when the
function returns even without explicitly setting them. This will protect
us when new fields are added, removes some explicit zero assignment and
makes the code a little nicer to read.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Kevin Wolf [Thu, 10 Nov 2016 16:40:34 +0000 (17:40 +0100)]
quorum: Inline quorum_fifo_aio_cb()
Inlining the function removes some boilerplace code and replaces
recursion by a simple loop, so the code becomes somewhat easier to
understand.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Kevin Wolf [Thu, 10 Nov 2016 16:22:07 +0000 (17:22 +0100)]
quorum: Implement .bdrv_co_preadv/pwritev()
This enables byte granularity requests on quorum nodes.
Note that the QMP events emitted by the driver are an external API that
we were careless enough to define as sector based. The offset and length
of requests reported in events are rounded therefore.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Kevin Wolf [Thu, 10 Nov 2016 15:50:16 +0000 (16:50 +0100)]
quorum: Avoid bdrv_aio_writev() for rewrites
Replacing it with bdrv_co_pwritev() prepares us for byte granularity
requests and gets us rid of the last bdrv_aio_*() user in quorum.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Kevin Wolf [Thu, 10 Nov 2016 15:13:15 +0000 (16:13 +0100)]
quorum: Inline quorum_aio_cb()
This is a conversion to a more natural coroutine style and improves the
readability of the driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Kevin Wolf [Thu, 10 Nov 2016 13:24:27 +0000 (14:24 +0100)]
quorum: Do cleanup in caller coroutine
Instead of calling quorum_aio_finalize() deeply nested in what used
to be an AIO callback, do it in the same functions that allocated the
AIOCB.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Kevin Wolf [Tue, 8 Nov 2016 10:10:14 +0000 (11:10 +0100)]
quorum: Implement .bdrv_co_readv/writev
This converts the quorum block driver from implementing callback-based
interfaces for read/write to coroutine-based ones. This is the first
step that will allow us further simplification of the code.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Kevin Wolf [Mon, 7 Nov 2016 17:00:29 +0000 (18:00 +0100)]
quorum: Remove s from quorum_aio_get() arguments
There is no point in passing the value of bs->opaque in order to
overwrite it with itself.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Kevin Wolf [Mon, 7 Nov 2016 15:34:35 +0000 (16:34 +0100)]
coroutine: Introduce qemu_coroutine_enter_if_inactive()
In the context of asynchronous work, if we have a worker coroutine that
didn't yield, the parent coroutine cannot be reentered because it hasn't
yielded yet. In this case we don't even have to reenter the parent
because it will see that the work is already done and won't even yield.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Paolo Bonzini [Wed, 7 Dec 2016 15:08:27 +0000 (16:08 +0100)]
qemu-img: fix in-flight count for qemu-img bench
With aio=native (qemu-img bench -n) one or more requests can be completed
when a new request is submitted. This in turn can cause bench_cb to
recurse before b->in_flight is updated. This causes multiple I/Os
to be submitted with the same offset and, furthermore, the blk_aio_*
coroutines are never freed and qemu-img aborts.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Peter Maydell [Mon, 9 Jan 2017 11:56:49 +0000 (11:56 +0000)]
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-
20170109' into staging
target-arm queue:
* i2c: Allow I2C devices to NAK start events
* hw/char: QOM'ify exynos4210_uart.c
* clean up and refactor virt-acpi-build.c
* virt-acpi-build: Don't incorrectly claim architectural timer
to be edge-triggered
* m25p80: Don't let rogue SPI controllers cause buffer overruns
* imx_spi: Remove broken MSGDATA register support
# gpg: Signature made Mon 09 Jan 2017 11:52:49 GMT
# gpg: using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-
20170109: (21 commits)
hw/ssi/imx_spi.c: Remove MSGDATA register support
m25p80: don't let rogue SPI controllers cause buffer overruns
hw/arm/virt-acpi-build: Don't incorrectly claim architectural timer to be edge-triggered
hw/arm/virt: remove VirtGuestInfo
hw/arm/virt-acpi-build: don't save VirtGuestInfo on AcpiBuildState
hw/arm/virt-acpi-build: remove redundant members from VirtGuestInfo
hw/arm/virt: pass VirtMachineState instead of VirtGuestInfo
hw/arm/virt: move VirtMachineState/Class to virt.h
hw/arm/virt: remove include/hw/arm/virt-acpi-build.h
hw/arm/virt: eliminate struct VirtGuestInfoState
hw/arm/virt: use VirtMachineState.gic_version
hw/arm/virt: parameter passing cleanups
hw/arm/virt-acpi-build: fadt: improve flag naming
hw/arm/virt-acpi-build: gtdt: improve flag naming
hw/arm/virt-acpi-build: name GIC CPU Interface Structure appropriately
hw/arm/virt-acpi-build: add all missing cpu_to_le's
hw/arm/virt: Don't incorrectly claim architectural timer to be edge-triggered
hw/arm/virt: Rename 'vbi' variables to 'vms'
hw/arm/virt: Merge VirtBoardInfo and VirtMachineState
hw/char: QOM'ify exynos4210_uart.c
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Jean-Christophe Dubois [Mon, 9 Jan 2017 11:40:23 +0000 (11:40 +0000)]
hw/ssi/imx_spi.c: Remove MSGDATA register support
From the documentation it is not clear what this SPI register is about.
Moreover, neither linux driver nor xvisor driver are using this SPI register.
For now we just remove it and issue a log on register write access.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id:
20170107122047.26300-1-jcd@tribudubois.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Jean-Christophe Dubois [Mon, 9 Jan 2017 11:40:23 +0000 (11:40 +0000)]
m25p80: don't let rogue SPI controllers cause buffer overruns
In normal operation we should never attempt to put more
data into the data[] array than it can hold. However if the
SPI controller connected to us misbehaves then it can send
us a sequence of commands that attempt this. Since the
controller might be in the guest (if the hardware does SPI
via bit-banging), catch the possible overrun conditions and
reset the flash internal state, logging them as guest errors.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id:
20170107111631.24444-1-jcd@tribudubois.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: rewrote commit message to be more exact about when
this can happen]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Andrew Jones [Mon, 9 Jan 2017 11:40:23 +0000 (11:40 +0000)]
hw/arm/virt-acpi-build: Don't incorrectly claim architectural timer to be edge-triggered
This is the ACPI equivalent to "hw/arm/virt: Don't incorrectly claim
architectural timer to be edge-triggered" which fixes the DT for
machine types 2.9 and later.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-id:
20170102200153.28864-15-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Andrew Jones [Mon, 9 Jan 2017 11:40:23 +0000 (11:40 +0000)]
hw/arm/virt: remove VirtGuestInfo
by moving VirtGuestInfo.fw_cfg to VirtMachineState. This is the
mach-virt equivalent of "pc: Move PcGuestInfo.fw_cfg to
PCMachineState" and "pc: Eliminate PcGuestInfo struct" combined.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-id:
20170102200153.28864-14-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Andrew Jones [Mon, 9 Jan 2017 11:40:22 +0000 (11:40 +0000)]
hw/arm/virt-acpi-build: don't save VirtGuestInfo on AcpiBuildState
We can get to VirtMachineState without the need for saving a pointer
on AcpiBuildState. This is the mach-virt equivalent to "acpi: Don't save
PcGuestInfo on AcpiBuildState"
Signed-off-by: Andrew Jones <drjones@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-id:
20170102200153.28864-13-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Andrew Jones [Mon, 9 Jan 2017 11:40:22 +0000 (11:40 +0000)]
hw/arm/virt-acpi-build: remove redundant members from VirtGuestInfo
Now that we pass VirtMachineState, and guest-info is just part of
that state, we can remove all the redundant members and access
the VirtMachineState directly.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-id:
20170102200153.28864-12-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Andrew Jones [Mon, 9 Jan 2017 11:40:22 +0000 (11:40 +0000)]
hw/arm/virt: pass VirtMachineState instead of VirtGuestInfo
Only two functions take VirtGuestInfo parameters. Now that guest-info
is part of VirtMachineState, and VirtMachineState is defined in the
virt header, pass that instead.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-id:
20170102200153.28864-11-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Andrew Jones [Mon, 9 Jan 2017 11:40:22 +0000 (11:40 +0000)]
hw/arm/virt: move VirtMachineState/Class to virt.h
In preparation to share more Virt machine state than just guest-info
with other mach-virt source files, move the State and Class structures
to virt.h
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-id:
20170102200153.28864-10-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Andrew Jones [Mon, 9 Jan 2017 11:40:22 +0000 (11:40 +0000)]
hw/arm/virt: remove include/hw/arm/virt-acpi-build.h
include/hw/arm/virt-acpi-build.h is only used for VirtGuestInfo,
which doesn't even necessarily have to be ACPI specific. Move
VirtGuestInfo to include/hw/arm/virt.h, allowing us to remove
include/hw/arm/virt-acpi-build.h, and to prepare for even more
code motion.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-id:
20170102200153.28864-9-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Andrew Jones [Mon, 9 Jan 2017 11:40:22 +0000 (11:40 +0000)]
hw/arm/virt: eliminate struct VirtGuestInfoState
Instead of allocating a new struct just for VirtGuestInfo and the
machine_done Notifier, place them inside VirtMachineState. This
is the mach-virt equivalent of "pc: Eliminate struct
PcGuestInfoState"
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-id:
20170102200153.28864-8-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Andrew Jones [Mon, 9 Jan 2017 11:40:22 +0000 (11:40 +0000)]
hw/arm/virt: use VirtMachineState.gic_version
machvirt_init may need to probe for the gic version. If so, then
make sure the result is written to VirtMachineState. With the
state up to date, use it instead of a local variable. This is a
cleanup that prepares for VirtMachineState to be passed to functions
even outside hw/arm/virt.c
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-id:
20170102200153.28864-7-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Andrew Jones [Mon, 9 Jan 2017 11:40:22 +0000 (11:40 +0000)]
hw/arm/virt: parameter passing cleanups
Some simple cleanups made possible by "hw/arm/virt: Merge
VirtBoardInfo and VirtMachineState"
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-id:
20170102200153.28864-6-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Andrew Jones [Mon, 9 Jan 2017 11:40:21 +0000 (11:40 +0000)]
hw/arm/virt-acpi-build: fadt: improve flag naming
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id:
20170102200153.28864-5-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Andrew Jones [Mon, 9 Jan 2017 11:40:21 +0000 (11:40 +0000)]
hw/arm/virt-acpi-build: gtdt: improve flag naming
Also remove all unused flags.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id:
20170102200153.28864-4-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Andrew Jones [Mon, 9 Jan 2017 11:40:21 +0000 (11:40 +0000)]
hw/arm/virt-acpi-build: name GIC CPU Interface Structure appropriately
Also move the enabled flag definition from mach-virt code to
acpi common.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id:
20170102200153.28864-3-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Andrew Jones [Mon, 9 Jan 2017 11:40:21 +0000 (11:40 +0000)]
hw/arm/virt-acpi-build: add all missing cpu_to_le's
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id:
20170102200153.28864-2-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 9 Jan 2017 11:40:21 +0000 (11:40 +0000)]
hw/arm/virt: Don't incorrectly claim architectural timer to be edge-triggered
The architectural timers in ARM CPUs all have level triggered interrupts
(unless you're using KVM on a host kernel before 4.4, which misimplemented
them as edge-triggered).
We were incorrectly describing them in the device tree as edge triggered.
This can cause problems for guest kernels in 4.8 before rc6:
* pre-4.8 kernels ignore the values in the DT
* 4.8 before rc6 write the DT values to the GIC config registers
* newer than rc6 ignore the DT and insist that the timer interrupts
are level triggered regardless
Fix the DT so we're describing reality. For backwards-compatibility
purposes, only do this for the virt-2.9 machine onward.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Peter Maydell [Mon, 9 Jan 2017 11:40:21 +0000 (11:40 +0000)]
hw/arm/virt: Rename 'vbi' variables to 'vms'
Rename all the variables which used to be VirtBoardInfo*
and are now VirtMachineState* so their names are in line
with the type being used.
Apart from the removal of the line 'VirtMachineState *vbi = vms;'
this commit is purely a search-and-replace of 'vbi' with 'vms'.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Peter Maydell [Mon, 9 Jan 2017 11:40:21 +0000 (11:40 +0000)]
hw/arm/virt: Merge VirtBoardInfo and VirtMachineState
One of the purposes of VirtBoardInfo was to hold various
bits of state about the board. Now we have MachineState
and the subclass VirtMachineState to do this. Fold the
VirtBoardInfo into VirtMachineState rather than having
some flags in one struct and some in another with no
useful way to get between them.
In the process we drop the code for looking up the
memory map and irq map from the CPU model, because
in practice we always use the same maps in all cases.
For easier code review, this change removes the
VirtBoardInfo type but leaves all the variables which
used to be VirtBoardInfo* and are now VirtMachineState*
with their now-confusing 'vbi' names.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
xiaoqiang zhao [Mon, 9 Jan 2017 11:40:21 +0000 (11:40 +0000)]
hw/char: QOM'ify exynos4210_uart.c
Drop the old Sysbus init and use instance_init and
DeviceClass::realize instead
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Corey Minyard [Mon, 9 Jan 2017 11:40:20 +0000 (11:40 +0000)]
i2c: Allow I2C devices to NAK start events
Add a return value to the event handler. Some I2C devices will
NAK if they have no data, so allow them to do this. This required
the following changes:
Go through all the event handlers and change them to return int
and return 0.
Modify i2c_start_transfer to terminate the transaction on a NAK.
Modify smbus handing to not assert if a NAK occurs on a second
operation, and terminate the transaction and return -1 instead.
Add some information on semantics to I2CSlaveClass.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Sun, 8 Jan 2017 17:48:34 +0000 (09:48 -0800)]
translate-all: Avoid -Werror=switch-bool
gcc 5.3.0 diagnoses
translate-all.c: In function ‘alloc_code_gen_buffer’:
translate-all.c:756:17: error: switch condition has boolean value
switch (buf2 != MAP_FAILED) {
^
Signed-off-by: Richard Henderson <rth@twiddle.net>
Jin Guojie [Thu, 5 Jan 2017 04:57:55 +0000 (12:57 +0800)]
tcg-mips: Adjust qemu_ld/st for mips64
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: James Hogan <james.hogan@imgtec.com>
Tested-by: YunQiang Su <wzssyqa@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Jin Guojie <jinguojie@loongson.cn>
Message-Id: <
1483592275-4496-11-git-send-email-jinguojie@loongson.cn>
Jin Guojie [Thu, 5 Jan 2017 04:57:54 +0000 (12:57 +0800)]
tcg-mips: Adjust calling conventions for mips64
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: James Hogan <james.hogan@imgtec.com>
Tested-by: YunQiang Su <wzssyqa@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Jin Guojie <jinguojie@loongson.cn>
Message-Id: <
1483592275-4496-10-git-send-email-jinguojie@loongson.cn>
Jin Guojie [Thu, 5 Jan 2017 04:57:53 +0000 (12:57 +0800)]
tcg-mips: Add tcg unwind info
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: James Hogan <james.hogan@imgtec.com>
Tested-by: YunQiang Su <wzssyqa@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Jin Guojie <jinguojie@loongson.cn>
Message-Id: <
1483592275-4496-9-git-send-email-jinguojie@loongson.cn>
Jin Guojie [Thu, 5 Jan 2017 04:57:52 +0000 (12:57 +0800)]
tcg-mips: Adjust prologue for mips64
Take stack frame parameters out from the function body.
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: James Hogan <james.hogan@imgtec.com>
Tested-by: YunQiang Su <wzssyqa@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Jin Guojie <jinguojie@loongson.cn>
Message-Id: <
1483592275-4496-8-git-send-email-jinguojie@loongson.cn>
Jin Guojie [Thu, 5 Jan 2017 04:57:51 +0000 (12:57 +0800)]
tcg-mips: Adjust load/store functions for mips64
tcg_out_ldst: using a generic ALIAS_PADD to avoid ifdefs
tcg_out_ld: generates LD or LW
tcg_out_st: generates SD or SW
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: James Hogan <james.hogan@imgtec.com>
Tested-by: YunQiang Su <wzssyqa@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Jin Guojie <jinguojie@loongson.cn>
Message-Id: <
1483592275-4496-7-git-send-email-jinguojie@loongson.cn>
Jin Guojie [Thu, 5 Jan 2017 04:57:50 +0000 (12:57 +0800)]
tcg-mips: Adjust move functions for mips64
tcg_out_mov: using OPC_OR as most mips assemblers do;
tcg_out_movi: extended to 64-bit immediate.
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: James Hogan <james.hogan@imgtec.com>
Tested-by: YunQiang Su <wzssyqa@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Jin Guojie <jinguojie@loongson.cn>
Message-Id: <
1483592275-4496-6-git-send-email-jinguojie@loongson.cn>