OSDN Git Service
Linus Walleij [Tue, 19 Jan 2010 10:41:52 +0000 (11:41 +0100)]
mfd: Use AB3100 MFD core IRQ for interrupt randomness
This reintroduces the entropy sampling of the AB3100 IRQ as the
IRQF_SAMPLE_RANDOM is going out according to the feature removal
schedule. I'm trying to do this the right way then, so CC:ing some
random people for a quick review. We add entropy for interrupt
events in the AB3100 which are truly random in nature, like
external cables being connected, voltages on batteries dropping
below certain ranges, ADC triggers or overheating.
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Cc: Robin Getz <rgetz@blackfin.uclinux.org>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Cory Maccarrone [Tue, 19 Jan 2010 10:22:45 +0000 (11:22 +0100)]
mfd: Add HTCPLD driver
This change introduces a driver for the HTC PLD chip found
on some smartphones, such as the HTC Wizard and HTC Herald.
It works through the I2C bus and acts as a GPIO extender.
Specifically:
* it can have several sub-devices, each with its own I2C
address
* Each sub-device provides 8 output and 8 input pins
* The chip attaches to one GPIO to signal when any of the
input GPIOs change -- at which point all chips must be
scanned for changes
This driver implements the GPIOs throught the kernel's
GPIO and IRQ framework. This allows any GPIO-servicing
drivers to operate on htcpld pins, such as the gpio-keys
and gpio-leds drivers.
Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Haojian Zhuang [Mon, 11 Jan 2010 12:10:08 +0000 (13:10 +0100)]
regulator: Add max8925 support
MAX8925 contains 3 Buck and 20 LDO regulator.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Haojian Zhuang [Fri, 18 Dec 2009 15:01:45 +0000 (10:01 -0500)]
backlight: Enable max8925 backlight
Enable max8925 backlight sub device.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Haojian Zhuang [Fri, 8 Jan 2010 17:43:29 +0000 (12:43 -0500)]
mfd: Add subdevs in max8925
Add subdevs in MAX8925. MAX8925 includes regulator, backlight and touch
components.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Haojian Zhuang [Fri, 8 Jan 2010 11:29:23 +0000 (12:29 +0100)]
mfd: Initial max8925 support
Basic Max8925 support, which is a power management IC from Maxim
Semiconductor.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Haojian Zhuang [Thu, 10 Dec 2009 11:06:17 +0000 (06:06 -0500)]
regulator: Unsupport 88pm8607 A0 and A1
Remove the support 88PM8607 A0/A1 stepping. There's some register
definition changes in B0 stepping. It can make software more efficient.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Haojian Zhuang [Tue, 15 Dec 2009 21:06:17 +0000 (16:06 -0500)]
input: Enable touch on 88pm860x
Enable touchscreen driver for the 88pm860x multi function core.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Haojian Zhuang [Wed, 6 Jan 2010 22:10:09 +0000 (17:10 -0500)]
led: Enable led in 88pm860x
Enable led sub device in Marvell 88PM860x. Two LED arrays can be supported.
Each LED array can be used for R,G,B leds.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Haojian Zhuang [Mon, 9 Nov 2009 17:41:07 +0000 (12:41 -0500)]
backlight: Enable backlight in 88pm860x
At most, three backlight device can be supported in 88pm860x driver.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Haojian Zhuang [Tue, 15 Dec 2009 21:04:36 +0000 (16:04 -0500)]
mfd: Append subdev into 88pm860x driver
Append backlight, led & touch subdevs into 88pm860x driver.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Haojian Zhuang [Tue, 15 Dec 2009 21:01:47 +0000 (16:01 -0500)]
mfd: Add irq support in 88pm860x
88PM860x is a complex PMIC device. It contains touch, charger, sound, rtc,
backlight, led, and so on.
Host communicates to 88PM860x by I2C bus. Use thread irq to support this
usage case.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Haojian Zhuang [Wed, 6 Jan 2010 22:07:13 +0000 (17:07 -0500)]
mfd: Rename 88pm8607 to 88pm860x in mfd
Rename 88PM8607 to 88PM860X in both Makefile and Kconfig under mfd directory.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Haojian Zhuang [Fri, 8 Jan 2010 11:01:24 +0000 (06:01 -0500)]
mfd: Support 88pm8606 in 860x driver
88PM8606 and 88PM8607 are two discrete chips used for power management.
Hardware designer can use them together or only one of them according to
requirement.
There's some logic tightly linked between these two chips. For example, USB
charger driver needs to access both chips by I2C interface.
Now share one driver to these two devices. Only one I2C client is identified
in platform init data. If another chip is also used, user should mark it in
companion_addr field of platform init data. Then driver could create another
I2C client for the companion chip.
All I2C operations are accessed by 860x-i2c driver. In order to support both
I2C client address, the read/write API is changed in below.
reg_read(client, offset)
reg_write(client, offset, data)
The benefit is that client drivers only need one kind of read/write API. I2C
and MFD driver can be shared in both 8606 and 8607.
Since API is changed, update API in 8607 regulator driver.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Haojian Zhuang [Wed, 6 Jan 2010 22:04:18 +0000 (17:04 -0500)]
mfd: Split 88pm8607 driver
Create 88pm8607-i2c driver to support all I2C operation of 88PM8607.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Linus Walleij [Fri, 8 Jan 2010 09:44:16 +0000 (10:44 +0100)]
mfd: Convert AB3100 driver to threaded IRQ
This converts the AB3100 core MFD driver to use a threaded
interrupt handler instead of the explicit top/bottom-half
construction with a workqueue. This saves some code and make it
more similar to other modern MFD drivers.
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Mark Brown [Thu, 7 Jan 2010 16:10:08 +0000 (16:10 +0000)]
gpiolib: Add support for WM8350 GPIO controller
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Mark Brown [Wed, 6 Jan 2010 19:24:25 +0000 (19:24 +0000)]
mfd: Update WM8350 drivers for changed interrupt numbers
The headphone detect and charger are using the IRQ numbers so need
to take account of irq_base with the genirq conversion. I obviously
picked the wrong system for initial testing.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Mark Brown [Tue, 5 Jan 2010 20:40:47 +0000 (20:40 +0000)]
mfd: Don't allow WM8350 to be built modular
The genirq implementation does not allow modules to implement irq_chips
so the conversion of WM8350 to genirq means we can no longer allow the
driver to be built as a module.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Mark Brown [Tue, 5 Jan 2010 13:59:09 +0000 (13:59 +0000)]
mfd: Convert WM8350 to genirq
This gives us use of the diagnostic facilities genirq provides and
will allow implementation of interrupt support for the WM8350 GPIOs.
Stub functions are provided to ease the transition of the individual
drivers, probably after additional work to pass the IRQ numbers via
the struct devices.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Mark Brown [Tue, 5 Jan 2010 13:59:08 +0000 (13:59 +0000)]
rtc: Suppress duplicate enable/disable of WM8350 update interrupt
Unlike the wm8350-custom code genirq nests enable and disable calls
so we can't just unconditionally mask or unmask the interrupt,
we need to remember the state we set and only mask or unmask when
there is a real change.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: rtc-linux@googlegroups.com
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Mark Brown [Tue, 5 Jan 2010 13:59:07 +0000 (13:59 +0000)]
mfd: Add a data argument to the WM8350 IRQ free function
To better match genirq.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Julia Lawall [Tue, 22 Dec 2009 20:31:43 +0000 (21:31 +0100)]
mfd: Correct use after free for t7l66xb
The structure t7l66xb should not be freed before the subsequent references
to its fields in the arguments to clk_put. Furthermore, this structure is
allocated near the beginning of the function, and a goto to the label
err_noirq appears after a successful allocation, so it would seem that the
kfree should be moved down below this label.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
expression x,e;
identifier f;
iterator I;
statement S;
@@
*kfree(x);
... when != &x
when != x = e
when != I(x,...) S
*x->f
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
H Hartley Sweeten [Tue, 5 Jan 2010 19:01:16 +0000 (20:01 +0100)]
mfd: Use resouce_size for tc6393xb
Use resource_size() for ioremap.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
H Hartley Sweeten [Tue, 5 Jan 2010 18:58:34 +0000 (19:58 +0100)]
mfd: Use resource_size() for t7l66xb
Use resource_size() for ioremap.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
H Hartley Sweeten [Tue, 5 Jan 2010 18:55:54 +0000 (19:55 +0100)]
mfd: Use resource_size() in sm501
The requested memory region is smaller than the actual ioremap().
Use resource_size() to get the correct size.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Linus Torvalds [Sun, 7 Mar 2010 20:52:38 +0000 (12:52 -0800)]
Merge branch 'next' of git://git./linux/kernel/git/davej/cpufreq
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
[CPUFREQ] Fix cast warning in pcc driver.
[CPUFREQ] Processor Clocking Control interface driver
Dmitry Torokhov [Sun, 7 Mar 2010 20:37:17 +0000 (12:37 -0800)]
USB: remove unused defintion of struct usb_device_status
The recent rework of /proc/bus/usb/devices polling support made
this structure unused so let's remove it.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 7 Mar 2010 17:54:44 +0000 (09:54 -0800)]
Revert "lib: build list_sort() only if needed"
This reverts commit
a069c266ae5fdfbf5b4aecf2c672413aa33b2504.
It turns ou that not only was it missing a case (XFS) that needed it,
but perhaps more importantly, people sometimes want to enable new
modules that they hadn't had enabled before, and if such a module uses
list_sort(), it can't easily be inserted any more.
So rather than add a "select LIST_SORT" to the XFS case, just leave it
compiled in. It's not all _that_ big, after all, and the inconvenience
isn't worth it.
Requested-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Don Mullis <don.mullis@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bjorn Helgaas [Fri, 5 Mar 2010 17:47:37 +0000 (10:47 -0700)]
vsprintf: move %pR resource printf_specs off the stack
This adds separate I/O and memory specs, so we don't have to change the
field width in a shared spec, which then lets us make all the specs const
and static, since they never change.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bjorn Helgaas [Fri, 5 Mar 2010 17:47:31 +0000 (10:47 -0700)]
vsprintf: clarify comments for printf_spec flags
Add clues about what the SMALL and SPECIAL flags do.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Sun, 7 Mar 2010 01:10:14 +0000 (17:10 -0800)]
vsprintf.c: Reduce sizeof struct printf_spec from 24 to 8 bytes
Reducing the size of struct printf_spec is a good thing because multiple
instances are commonly passed on stack.
It's possible for type to be u8 and field_width to be s8, but this is
likely small enough for now.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 7 Mar 2010 00:34:34 +0000 (16:34 -0800)]
usbfs: fix deadlock on 'usbfs_mutex', clean up poll
The caller of usbfs_conn_disc_event() in some cases (but not always)
already holds usbfs_mutex, so trying to protect the event counter with
that lock causes nasty deadlocks.
The problem was introduced by commit
554f76962d ("USB: Remove BKL from
poll()") when the BLK protection was turned into using the mutex instead.
So fix this by using an atomic variable instead. And while we're at it,
get rid of the atrocious naming of said variable and the waitqueue it is
associated with.
This also cleans up the unnecessary locking in the poll routine, since
the whole point of how the pollwait table works is that you can just add
yourself to the waiting list, and then check the condition you're
waiting for afterwards - avoiding all races.
It also gets rid of the unnecessary dynamic allocation of the device
status that just contained a single word. We should use f_version for
this, as Dmitry Torokhov points out. That simplifies everything
further.
Reported-and-tested-by: Jeff Chua <jeff.chua.linux@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: Oliver Neukum <oliver@neukum.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 6 Mar 2010 21:18:03 +0000 (13:18 -0800)]
Merge git://git./linux/kernel/git/joern/logfs
* git://git.kernel.org/pub/scm/linux/kernel/git/joern/logfs:
[LogFS] Change magic number
[LogFS] Remove h_version field
[LogFS] Check feature flags
[LogFS] Only write journal if dirty
[LogFS] Fix bdev erases
[LogFS] Silence gcc
[LogFS] Prevent 64bit divisions in hash_index
[LogFS] Plug memory leak on error paths
[LogFS] Add MAINTAINERS entry
[LogFS] add new flash file system
Fixed up trivial conflict in lib/Kconfig, and a semantic conflict in
fs/logfs/inode.c introduced by write_inode() being changed to use
writeback_control' by commit
a9185b41a4f84971b930c519f0c63bd450c4810d
("pass writeback_control to ->write_inode")
Linus Torvalds [Sat, 6 Mar 2010 19:34:04 +0000 (11:34 -0800)]
Merge git://git./linux/kernel/git/agk/linux-2.6-dm
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm:
dm raid1: fix deadlock when suspending failed device
dm: eliminate some holes data structures
dm ioctl: introduce flag indicating uevent was generated
dm: free dm_io before bio_endio not after
dm table: remove unused dm_get_device range parameters
dm ioctl: only issue uevent on resume if state changed
dm raid1: always return error if all legs fail
dm mpath: refactor pg_init
dm mpath: wait for pg_init completion when suspending
dm mpath: hold io until all pg_inits completed
dm mpath: avoid storing private suspended state
dm: document when snapshot has finished merging
dm table: remove dm_get from dm_table_get_md
dm mpath: skip activate_path for failed paths
dm mpath: pass struct pgpath to pg init done
Linus Torvalds [Sat, 6 Mar 2010 19:33:09 +0000 (11:33 -0800)]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/jdelvare/staging
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: (23 commits)
hwmon: Remove the deprecated adt7473 driver
hwmon: Fix off-by-one kind values
hwmon: (tmp421) Fix temperature conversions
hwmon: (tmp421) Restore missing inputs
hwmon: Driver for Andigilog aSC7621 family monitoring chips
hwmon: (adt7411) Improve locking
hwmon: Add driver for ADT7411 voltage and temperature sensor
hwmon: (w83793) Add watchdog functionality
hwmon: (g760a) Make rpm_from_cnt static
hwmon: (it87) Validate auto pwm settings
hwmon: (it87) Add support for old automatic fan speed control
hwmon: (it87) Drop dead web links in documentation
hwmon: (it87) Add an entry in MAINTAINERS
hwmon: (it87) Use strict_strtol instead of simple_strtol
hwmon: (it87) Fix many checkpatch errors and warnings
hwmon: (it87) Add support for beep on alarm
hwmon: (it87) Create vid attributes by group
hwmon: (it87) Refactor attributes creation and removal
hwmon: (it87) Expose the PWM/temperature mappings
hwmon: (it87) Display fan outputs in automatic mode as such
...
Linus Torvalds [Sat, 6 Mar 2010 19:32:21 +0000 (11:32 -0800)]
Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
* 'for-linus' of git://oss.sgi.com/xfs/xfs: (21 commits)
xfs: return inode fork offset in bulkstat for fsr
xfs: Increase the default size of the reserved blocks pool
xfs: truncate delalloc extents when IO fails in writeback
xfs: check for more work before sleeping in xfssyncd
xfs: Fix a build warning in xfs_aops.c
xfs: fix locking for inode cache radix tree tag updates
xfs: remove xfs_ipin/xfs_iunpin
xfs: cleanup xfs_iunpin_wait/xfs_iunpin_nowait
xfs: kill xfs_lrw.h
xfs: factor common xfs_trans_bjoin code
xfs: stop passing opaque handles to xfs_log.c routines
xfs: split xfs_bmap_btalloc
xfs: fix xfs_fsblock_t tracing
xfs: fix inode pincount check in fsync
xfs: Non-blocking inode locking in IO completion
xfs: implement optimized fdatasync
xfs: remove wrapper for the fsync file operation
xfs: remove wrappers for read/write file operations
xfs: merge xfs_lrw.c into xfs_file.c
xfs: fix dquota trace format
...
Linus Torvalds [Sat, 6 Mar 2010 19:31:38 +0000 (11:31 -0800)]
Merge branch 'for-2.6.34' of git://linux-nfs.org/~bfields/linux
* 'for-2.6.34' of git://linux-nfs.org/~bfields/linux: (22 commits)
nfsd4: fix minor memory leak
svcrpc: treat uid's as unsigned
nfsd: ensure sockets are closed on error
Revert "sunrpc: move the close processing after do recvfrom method"
Revert "sunrpc: fix peername failed on closed listener"
sunrpc: remove unnecessary svc_xprt_put
NFSD: NFSv4 callback client should use RPC_TASK_SOFTCONN
xfs_export_operations.commit_metadata
commit_metadata export operation replacing nfsd_sync_dir
lockd: don't clear sm_monitored on nsm_reboot_lookup
lockd: release reference to nsm_handle in nlm_host_rebooted
nfsd: Use vfs_fsync_range() in nfsd_commit
NFSD: Create PF_INET6 listener in write_ports
SUNRPC: NFS kernel APIs shouldn't return ENOENT for "transport not found"
SUNRPC: Bury "#ifdef IPV6" in svc_create_xprt()
NFSD: Support AF_INET6 in svc_addsock() function
SUNRPC: Use rpc_pton() in ip_map_parse()
nfsd: 4.1 has an rfc number
nfsd41: Create the recovery entry for the NFSv4.1 client
nfsd: use vfs_fsync for non-directories
...
Linus Torvalds [Sat, 6 Mar 2010 19:30:18 +0000 (11:30 -0800)]
Merge git://git.infradead.org/ubi-2.6
* git://git.infradead.org/ubi-2.6:
UBI: add write checking
UBI: simplify debugging return codes
UBI: fix attaching error path
UBI: support attaching by MTD character device name
UBI: mark few variables as __initdata
Denis Turischev [Fri, 5 Mar 2010 21:44:39 +0000 (13:44 -0800)]
gpio: introduce it8761e_gpio driver for IT8761E Super I/O chip
Signed-off-by: Denis Turischev <denis@compulab.co.il>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ben Gardner [Fri, 5 Mar 2010 21:44:38 +0000 (13:44 -0800)]
gpio: cs5535-gpio: fix input direction
The cs5535-gpio driver's get() function was returning the output value.
This means that the GPIO pins would never work as an input, even if
configured as an input.
The driver should return the READ_BACK value, which is the sensed line
value. To make that work when the direction is 'output', INPUT_ENABLE
needs to be set.
In addition, the driver was not disabling OUTPUT_ENABLE when the direction
is set to 'input'. That would cause the GPIO to continue to drive the pin
if the direction was ever set to output.
This issue was noticed when attempting to use the gpiolib driver to read
an external input. I had previously been using the char/cs5535-gpio
driver.
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Acked-by: Andres Salomon <dilinger@collabora.co.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: <stable@kernel.org> [2.6.33.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Marc Zyngier [Fri, 5 Mar 2010 21:44:36 +0000 (13:44 -0800)]
gpio: pca953x.c: add interrupt handling capability
Most of the GPIO expanders controlled by the pca953x driver are able to
report changes on the input pins through an *INT pin.
This patch implements the irq_chip functionality (edge detection only).
The driver has been tested on an Arcom Zeus.
[akpm@linux-foundation.org: the compiler does inlining for us nowadays]
Signed-off-by: Marc Zyngier <maz@misterjones.org>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Nate Case <ncase@xes-inc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Richard Röjfors [Fri, 5 Mar 2010 21:44:35 +0000 (13:44 -0800)]
timbgpio: add support for interrupt triggering on both flanks
Introduce support for triggering interrupts on both rising and falling
edge.
This feature requires version 3 or newer of the IP, a version check is
done when triggering on both edges is requested.
Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Miao [Fri, 5 Mar 2010 21:44:35 +0000 (13:44 -0800)]
gpio: introduce gpio_request_one() and friends
gpio_request() without initial configuration of the GPIO is normally
useless, introduce gpio_request_one() together with GPIOF_ flags for
input/output direction and initial output level.
gpio_{request,free}_array() for multiple GPIOs.
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Ben Nizette <bn@niasdigital.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Olof Johansson [Fri, 5 Mar 2010 21:44:34 +0000 (13:44 -0800)]
pca953x: minor include cleanup
linux/i2c/pca953x.h is a very bare include file. Fix check for multiple
includes of linux/i2c/pca953x.h, and add dependent includes into the
header file.
Signed-off-by: Olof Johansson <olof@lixom.net>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Jean Delvare <khali@linux-fr.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Wolfram Sang [Fri, 5 Mar 2010 21:44:33 +0000 (13:44 -0800)]
gpio: add driver for MAX7300 I2C GPIO extender
Add the MAX7300-I2C variant of the MAX7301-SPI version. Both chips share
the same core logic, so the generic part of the in-kernel SPI-driver is
refactored into a generic part. The I2C and SPI specific funtions are
then wrapped into seperate drivers picking up the generic part.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Juergen Beisert <j.beisert@pengutronix.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
James Hogan [Fri, 5 Mar 2010 21:44:31 +0000 (13:44 -0800)]
rtc-coh901331: fix braces in resume code
The else part of the if statement is indented but does not have braces
around it. It clearly should since it uses clk_enable and clk_disable
which are supposed to balance.
Signed-off-by: James Hogan <james@albanarts.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Uwe Kleine-König [Fri, 5 Mar 2010 21:44:30 +0000 (13:44 -0800)]
rtc/mc13783: implement alarm
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Paul Gortmaker <p_gortmaker@yahoo.com>
Cc: Valentin Longchamp <valentin.longchamp@epfl.ch>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Luotao Fu <l.fu@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Uwe Kleine-König [Fri, 5 Mar 2010 21:44:30 +0000 (13:44 -0800)]
rtc/mc13783: protect rtc {,un}registration by mc13783 lock
This is to protect from interrupt handlers using an unregistered rtc
device.
To assert that the reset irq is considered now before the rtc is
registered the corresponding status is checked before.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Paul Gortmaker <p_gortmaker@yahoo.com>
Cc: Valentin Longchamp <valentin.longchamp@epfl.ch>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Luotao Fu <l.fu@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Uwe Kleine-König [Fri, 5 Mar 2010 21:44:29 +0000 (13:44 -0800)]
mfd/mc13783: new function reading irq mask and status register
The driver for the mc13783 rtc needs to know if the TODA irq is pending.
Instead of tracking in the rtc driver if the irq is enabled provide that
information, too.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Paul Gortmaker <p_gortmaker@yahoo.com>
Cc: Valentin Longchamp <valentin.longchamp@epfl.ch>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Luotao Fu <l.fu@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Uwe Kleine-König [Fri, 5 Mar 2010 21:44:28 +0000 (13:44 -0800)]
rtc/mc13783: don't use deprecated mc13783 API calls
mc13783_ackirq, mc13783_unmask and mc13783_mask are deprecated, use the
drop in replacements with the nicer names.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Paul Gortmaker <p_gortmaker@yahoo.com>
Cc: Valentin Longchamp <valentin.longchamp@epfl.ch>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Luotao Fu <l.fu@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Uwe Kleine-König [Fri, 5 Mar 2010 21:44:26 +0000 (13:44 -0800)]
input/mc13783-ts: don't use deprecated mc13783 API calls
mc13783_ackirq is deprecated, use the drop in replacement mc13783_irq_ack.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Paul Gortmaker <p_gortmaker@yahoo.com>
Cc: Valentin Longchamp <valentin.longchamp@epfl.ch>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Cc: Luotao Fu <l.fu@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Uwe Kleine-König [Fri, 5 Mar 2010 21:44:25 +0000 (13:44 -0800)]
mc13783: rename mc13783_{{un,}mask,ack_irq} to have a mc13783_irq prefix
In the source file group these functions together.
The mc13783 header file provides fallback implementations for the old
names to prevent build failures. When all users of the old names are
fixed to use the new names these can go away.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Paul Gortmaker <p_gortmaker@yahoo.com>
Cc: Valentin Longchamp <valentin.longchamp@epfl.ch>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Luotao Fu <l.fu@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Aaro Koskinen [Fri, 5 Mar 2010 21:44:24 +0000 (13:44 -0800)]
rtc-core: fix memory leak
The idr should be destroyed when the module is unloaded. Found with
kmemleak.
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: stable <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tobias Klauser [Fri, 5 Mar 2010 21:44:23 +0000 (13:44 -0800)]
rtc-twl: Storage class should be before const qualifier
The C99 specification states in section 6.11.5:
The placement of a storage-class specifier other than at the beginning of
the declaration specifiers in a declaration is an obsolescent feature.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Julia Lawall [Fri, 5 Mar 2010 21:44:23 +0000 (13:44 -0800)]
rtc-at91sam9: Correct size given to memset
Memset should be given the size of the structure, not the size of the
pointer.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
type T;
T *x;
expression E;
@@
memset(x, E, sizeof(
+ *
x))
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Uwe Kleine-König [Fri, 5 Mar 2010 21:44:21 +0000 (13:44 -0800)]
rtc-pcf2123: move pcf2123_remove to .devexit.text
The function pcf2123_remove is used only wrapped by __devexit_p so define
it using __devexit.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: Christian Pellegrin <chripell@fsfe.org>
Cc: Chris Verges <chrisv@cyberswitching.com>
Cc: Paul Gortmaker <p_gortmaker@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
H Hartley Sweeten [Fri, 5 Mar 2010 21:44:20 +0000 (13:44 -0800)]
rtc-ep93xx.c: cleanup probe/remove routines
Fix issue with rtc device not getting unregistered in probe error path.
Use the devres managed resource functions in the probe routine to cleanup
the error path.
Use sysfs_{create/remove}_group to add/remove the sysfs files.
Reduces the text size by 132 bytes, increases data by 12 bytes:
text data bss dec hex filename
- 937 124 0 1061 425 rtc-ep93xx.o
+ 805 136 0 941 3ad rtc-ep93xx.o
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: Paul Gortmaker <p_gortmaker@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexander Beregalov [Fri, 5 Mar 2010 21:44:19 +0000 (13:44 -0800)]
rtc: mxc: fix memory leak
Free pdata before exit. Found by cppcheck.
[yuasa@linux-mips.org: add missing iounmap()]
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
Acked-by: Daniel Mack <daniel@caiaq.de>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Cc Yoichi Yuasa <yuasa@linux-mips.org>
Cc: Paul Gortmaker <p_gortmaker@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Fri, 5 Mar 2010 21:44:18 +0000 (13:44 -0800)]
xen: add kconfig menu
Currently the xen support drivers are displayed in the main Device Drivers
menu of the config tools instead of in their own sub-menu, so move them to
their own sub-menu, like the rest of the driver world uses.
This keeps the main Device Drivers menu from becoming messy.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Thiago Farina [Fri, 5 Mar 2010 21:44:17 +0000 (13:44 -0800)]
console/vgacon.c: mark file-local symbol static
warning: symbol 'vgacon_text_mode_force' was not declared. Should it be static?
Signed-off-by: Thiago Farina <tfransosi@gmail.com>
Acked-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Amerigo Wang [Fri, 5 Mar 2010 21:44:17 +0000 (13:44 -0800)]
console: limit the range of VGACON_SOFT_SCROLLBACK_SIZE
BuraphaLinux reported that we will trigger a mm warning when we
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=65536, this is because mm cann't
allocate so many pages. We should limit the range of
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE, don't give a user any chance to
trigger that.
Reported-by: BuraphaLinux Server <buraphalinuxserver@gmail.com>
Tested-by: BuraphaLinux Server <buraphalinuxserver@gmail.com>
Signed-off-by: WANG Cong <amwang@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Neil Horman [Fri, 5 Mar 2010 21:44:16 +0000 (13:44 -0800)]
coredump: suppress uid comparison test if core output files are pipes
Modify uid check in do_coredump so as to not apply it in the case of
pipes.
This just got noticed in testing. The end of do_coredump validates the
uid of the inode for the created file against the uid of the crashing
process to ensure that no one can pre-create a core file with different
ownership and grab the information contained in the core when they
shouldn' tbe able to. This causes failures when using pipes for a core
dumps if the crashing process is not root, which is the uid of the pipe
when it is created.
The fix is simple. Since the check for matching uid's isn't relevant for
pipes (a process can't create a pipe that the uermodehelper code will open
anyway), we can just just skip it in the event ispipe is non-zero
Reverts a pipe-affecting change which was accidentally made in
: commit
c46f739dd39db3b07ab5deb4e3ec81e1c04a91af
: Author: Ingo Molnar <mingo@elte.hu>
: AuthorDate: Wed Nov 28 13:59:18 2007 +0100
: Commit: Linus Torvalds <torvalds@woody.linux-foundation.org>
: CommitDate: Wed Nov 28 10:58:01 2007 -0800
:
: vfs: coredumping fix
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Fri, 5 Mar 2010 21:44:14 +0000 (13:44 -0800)]
coredump: set ->group_exit_code for other CLONE_VM tasks too
User visible change.
do_coredump() kills all threads which share the same ->mm but only the
coredumping process gets the proper exit_code. Other tasks which share
the same ->mm die "silently" and return status == 0 to parent.
This is historical behaviour, not actually a bug. But I think Frank
Heckenbach rightly dislikes the current behaviour. Simple test-case:
#include <stdio.h>
#include <unistd.h>
#include <signal.h>
#include <sys/wait.h>
int main(void)
{
int stat;
if (!fork()) {
if (!vfork())
kill(getpid(), SIGQUIT);
}
wait(&stat);
printf("stat=%x\n", stat);
return 0;
}
Before this patch it prints "stat=0" despite the fact the child was killed
by SIGQUIT. After this patch the output is "stat=3" which obviously makes
more sense.
Even with this patch, only the task which originates the coredumping gets
"|= 0x80" if the core was actually dumped, but at least the coredumping
signal is visible to do_wait/etc.
Reported-by: Frank Heckenbach <f.heckenbach@fh-soft.de>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Masami Hiramatsu [Fri, 5 Mar 2010 21:44:12 +0000 (13:44 -0800)]
coredump: pass mm->flags as a coredump parameter for consistency
Pass mm->flags as a coredump parameter for consistency.
---
1787 if (mm->core_state || !get_dumpable(mm)) { <- (1)
1788 up_write(&mm->mmap_sem);
1789 put_cred(cred);
1790 goto fail;
1791 }
1792
[...]
1798 if (get_dumpable(mm) == 2) { /* Setuid core dump mode */ <-(2)
1799 flag = O_EXCL; /* Stop rewrite attacks */
1800 cred->fsuid = 0; /* Dump root private */
1801 }
---
Since dumpable bits are not protected by lock, there is a chance to change
these bits between (1) and (2).
To solve this issue, this patch copies mm->flags to
coredump_params.mm_flags at the beginning of do_coredump() and uses it
instead of get_dumpable() while dumping core.
This copy is also passed to binfmt->core_dump, since elf*_core_dump() uses
dump_filter bits in mm->flags.
[akpm@linux-foundation.org: fix merge]
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daisuke HATAYAMA [Fri, 5 Mar 2010 21:44:10 +0000 (13:44 -0800)]
elf coredump: add extended numbering support
The current ELF dumper implementation can produce broken corefiles if
program headers exceed 65535. This number is determined by the number of
vmas which the process have. In particular, some extreme programs may use
more than 65535 vmas. (If you google max_map_count, you can find some
users facing this problem.) This kind of program never be able to generate
correct coredumps.
This patch implements ``extended numbering'' that uses sh_info field of
the first section header instead of e_phnum field in order to represent
upto
4294967295 vmas.
This is supported by
AMD64-ABI(http://www.x86-64.org/documentation.html) and
Solaris(http://docs.sun.com/app/docs/doc/817-1984/).
Of course, we are preparing patches for gdb and binutils.
Signed-off-by: Daisuke HATAYAMA <d.hatayama@jp.fujitsu.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Greg Ungerer <gerg@snapgear.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daisuke HATAYAMA [Fri, 5 Mar 2010 21:44:09 +0000 (13:44 -0800)]
elf coredump: make offset calculation process and writing process explicit
By the next patch, elf_core_dump() and elf_fdpic_core_dump() will support
extended numbering and so will produce the corefiles with section header
table in a special case.
The problem is the process of writing a file header offset of the section
header table into e_shoff field of the ELF header. ELF header is
positioned at the beginning of the corefile, while section header at the
end. So, we need to take which of the following ways:
1. Seek backward to retry writing operation for ELF header
after writing process for a whole part
2. Make offset calculation process and writing process
totally sequential
The clause 1. is not always possible: one cannot assume that file system
supports seek function. Consider the no_llseek case.
Therefore, this patch adopts the clause 2.
Signed-off-by: Daisuke HATAYAMA <d.hatayama@jp.fujitsu.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Greg Ungerer <gerg@snapgear.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daisuke HATAYAMA [Fri, 5 Mar 2010 21:44:07 +0000 (13:44 -0800)]
elf coredump: replace ELF_CORE_EXTRA_* macros by functions
elf_core_dump() and elf_fdpic_core_dump() use #ifdef and the corresponding
macro for hiding _multiline_ logics in functions. This patch removes
#ifdef and replaces ELF_CORE_EXTRA_* by corresponding functions. For
architectures not implemeonting ELF_CORE_EXTRA_*, we use weak functions in
order to reduce a range of modification.
This cleanup is for my next patches, but I think this cleanup itself is
worth doing regardless of my firnal purpose.
Signed-off-by: Daisuke HATAYAMA <d.hatayama@jp.fujitsu.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Greg Ungerer <gerg@snapgear.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daisuke HATAYAMA [Fri, 5 Mar 2010 21:44:06 +0000 (13:44 -0800)]
coredump: move dump_write() and dump_seek() into a header file
My next patch will replace ELF_CORE_EXTRA_* macros by functions, putting
them into other newly created *.c files. Then, each files will contain
dump_write(), where each pair of binfmt_*.c and elfcore.c should be the
same. So, this patch moves them into a header file with dump_seek().
Also, the patch deletes confusing DUMP_WRITE macros in each files.
Signed-off-by: Daisuke HATAYAMA <d.hatayama@jp.fujitsu.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Greg Ungerer <gerg@snapgear.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daisuke HATAYAMA [Fri, 5 Mar 2010 21:44:05 +0000 (13:44 -0800)]
coredump: unify dump_seek() implementations for each binfmt_*.c
The current ELF dumper can produce broken corefiles if program headers
exceed 65535. In particular, the program in 64-bit environment often
demands more than 65535 mmaps. If you google max_map_count, then you can
find many users facing this problem.
Solaris has already dealt with this issue, and other OSes have also
adopted the same method as in Solaris. Currently, Sun's document and AMD
64 ABI include the description for the extension, where they call the
extension Extended Numbering. See Reference for further information.
I believe that linux kernel should adopt the same way as they did, so I've
written this patch.
I am also preparing for patches of GDB and binutils.
How to fix
==========
In new dumping process, there are two cases according to weather or
not the number of program headers is equal to or more than 65535.
- if less than 65535, the produced corefile format is exactly the same
as the ordinary one.
- if equal to or more than 65535, then e_phnum field is set to newly
introduced constant PN_XNUM(0xffff) and the actual number of program
headers is set to sh_info field of the section header at index 0.
Compatibility Concern
=====================
* As already mentioned in Summary, Sun and AMD64 has already adopted
this. See Reference.
* There are four combinations according to whether kernel and userland
tools are respectively modified or not. The next table summarizes
shortly for each combination.
---------------------------------------------
Original Kernel | Modified Kernel
---------------------------------------------
< 65535 | >= 65535 | < 65535 | >= 65535
-------------------------------------------------------------
Original Tools | OK | broken | OK | broken (#)
-------------------------------------------------------------
Modified Tools | OK | broken | OK | OK
-------------------------------------------------------------
Note that there is no case that `OK' changes to `broken'.
(#) Although this case remains broken, O-M behaves better than
O-O. That is, while in O-O case e_phnum field would be extremely
small due to integer overflow, in O-M case it is guaranteed to be at
least 65535 by being set to PN_XNUM(0xFFFF), much closer to the
actual correct value than the O-O case.
Test Program
============
Here is a test program mkmmaps.c that is useful to produce the
corefile with many mmaps. To use this, please take the following
steps:
$ ulimit -c unlimited
$ sysctl vm.max_map_count=70000 # default 65530 is too small
$ sysctl fs.file-max=70000
$ mkmmaps 65535
Then, the program will abort and a corefile will be generated.
If failed, there are two cases according to the error message
displayed.
* ``out of memory'' means vm.max_map_count is still smaller
* ``too many open files'' means fs.file-max is still smaller
So, please change it to a larger value, and then retry it.
mkmmaps.c
==
#include <stdio.h>
#include <stdlib.h>
#include <sys/mman.h>
#include <fcntl.h>
#include <unistd.h>
int main(int argc, char **argv)
{
int maps_num;
if (argc < 2) {
fprintf(stderr, "mkmmaps [number of maps to be created]\n");
exit(1);
}
if (sscanf(argv[1], "%d", &maps_num) == EOF) {
perror("sscanf");
exit(2);
}
if (maps_num < 0) {
fprintf(stderr, "%d is invalid\n", maps_num);
exit(3);
}
for (; maps_num > 0; --maps_num) {
if (MAP_FAILED == mmap((void *)NULL, (size_t) 1, PROT_READ,
MAP_SHARED | MAP_ANONYMOUS, (int) -1,
(off_t) NULL)) {
perror("mmap");
exit(4);
}
}
abort();
{
char buffer[128];
sprintf(buffer, "wc -l /proc/%u/maps", getpid());
system(buffer);
}
return 0;
}
Tested on i386, ia64 and um/sys-i386.
Built on sh4 (which covers fs/binfmt_elf_fdpic.c)
References
==========
- Sun microsystems: Linker and Libraries.
Part No: 817-1984-17, September 2008.
URL: http://docs.sun.com/app/docs/doc/817-1984
- System V ABI AMD64 Architecture Processor Supplement
Draft Version 0.99., May 11, 2009.
URL: http://www.x86-64.org/
This patch:
There are three different definitions for dump_seek() functions in
binfmt_aout.c, binfmt_elf.c and binfmt_elf_fdpic.c, respectively. The
only for binfmt_elf.c.
My next patch will move dump_seek() into a header file in order to share
the same implementations for dump_write() and dump_seek(). As the first
step, this patch unify these three definitions for dump_seek() by applying
the past commits that have been applied only for binfmt_elf.c.
Specifically, the modification made here is part of the following commits:
*
d025c9db7f31fc0554ce7fb2dfc78d35a77f3487
*
7f14daa19ea36b200d237ad3ac5826ae25360461
This patch does not change a shape of corefiles.
Signed-off-by: Daisuke HATAYAMA <d.hatayama@jp.fujitsu.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Greg Ungerer <gerg@snapgear.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexey Dobriyan [Fri, 5 Mar 2010 21:44:00 +0000 (13:44 -0800)]
proc: warn on non-existing proc entries
* warn if creation goes on to non-existent directory
* warn if removal goes on from non-existing directory
* warn if non-existing proc entry is removed
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexey Dobriyan [Fri, 5 Mar 2010 21:43:59 +0000 (13:43 -0800)]
proc: do translation + unlink atomically at remove_proc_entry()
remove_proc_entry() does
lock
lookup parent
unlock
lock
unlink proc entry from lists
unlock
which can be made bit more correct by doing parent translation + unlink
without dropping lock.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
José Miguel Gonçalves [Fri, 5 Mar 2010 21:43:58 +0000 (13:43 -0800)]
drivers/hwmon/adcxx.c: fix for single-channel ADCs
While testing an ADC121S021 in an embedded board with a S3C2142 SoC (ARM
core), I have found that the 'adcxx' driver does not handle correctly
single channel ADCs from this chip family. For single channel chips you
must only issue one read transfer for correct measurement.
Signed-off-by: Jose Miguel Goncalves <jose.goncalves@inov.pt>
Cc: Marc Pignat <marc.pignat@hevs.ch>
Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Fri, 5 Mar 2010 21:43:56 +0000 (13:43 -0800)]
drivers/hwmon/vt8231.c: fix continuation line formats
String constants that are continued on subsequent lines with \ will cause
spurious whitespace in the resulting output.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Roger Lucas <vt8231@hiddenengine.co.uk>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joakim Tjernlund [Fri, 5 Mar 2010 21:43:55 +0000 (13:43 -0800)]
crc32: some minor cleanups
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Fri, 5 Mar 2010 21:43:55 +0000 (13:43 -0800)]
checkpatch: warn on unnecessary spaces before quoted newlines
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alberto Panizzo [Fri, 5 Mar 2010 21:43:54 +0000 (13:43 -0800)]
checkpatch.pl: warn if an adding line introduce spaces before tabs.
Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Emese Revfy [Fri, 5 Mar 2010 21:43:53 +0000 (13:43 -0800)]
checkpatch.pl: extend list of expected-to-be-const structures
Based on Arjan's suggestion, extend the list of ops structures that should
be const.
Signed-off-by: Emese Revfy <re.emese@gmail.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stefani Seibold [Fri, 5 Mar 2010 21:43:52 +0000 (13:43 -0800)]
checkpatch.pl: add union and struct to the exceptions list
Here is a small code snippet, which will be complained about by
checkpatch.pl:
#define __STRUCT_KFIFO_COMMON(recsize, ptrtype) \
union { \
struct { \
unsigned int in; \
unsigned int out; \
}; \
char rectype[recsize]; \
ptrtype *ptr; \
const ptrtype *ptr_const; \
};
This construct is legal and safe, so checkpatch.pl should accept this. It
should be also true for struct defined in a macro.
Add the `struct' and `union' keywords to the exceptions list of the
checkpatch.pl script, to prevent error message "Macros with multiple
statements should be enclosed in a do - while loop". Otherwise it is not
possible to build a struct or union with a macro.
Signed-off-by: Stefani Seibold <stefani@seibold.net>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Wolfram Sang [Fri, 5 Mar 2010 21:43:51 +0000 (13:43 -0800)]
checkpatch: fix false positive on __initconst
checkpatch falsely complained about '__initconst' because it thought the
'const' needed a space before. Fix this by changing the list of
attributes:
- add '__initconst'
- force plain 'init' to contain a word-boundary at the end
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Fri, 5 Mar 2010 21:43:51 +0000 (13:43 -0800)]
checkpatch.pl: allow > 80 char lines for logging functions not just printk
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hidetoshi Seto [Fri, 5 Mar 2010 21:43:50 +0000 (13:43 -0800)]
checkpatch: trivial fix for trailing statements check
In case if the statement and the conditional are in one line, the line
appears in the report doubly.
And items of this check have no blank line before the next item.
This patch fixes these trivial problems, to improve readability of the
report.
[sample.c]
> if (cond1
> && cond2
> && cond3) func_foo();
>
> if (cond4) func_bar();
Before:
> ERROR: trailing statements should be on next line
> #1: FILE: sample.c:1:
> +if (cond1
> [...]
> + && cond3) func_foo();
> ERROR: trailing statements should be on next line
> #5: FILE: sample.c:5:
> +if (cond4) func_bar();
> +if (cond4) func_bar();
> total: 2 errors, 0 warnings, 5 lines checked
After:
> ERROR: trailing statements should be on next line
> #1: FILE: sample.c:1:
> +if (cond1
> [...]
> + && cond3) func_foo();
>
> ERROR: trailing statements should be on next line
> #5: FILE: sample.c:5:
> +if (cond4) func_bar();
>
> total: 2 errors, 0 warnings, 5 lines checked
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Fri, 5 Mar 2010 21:43:48 +0000 (13:43 -0800)]
scripts/checkpatch.pl: add WARN on sizeof(&foo)
sizeof(&foo) is frequently an error. Warn on its use.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vasily Khoruzhick [Fri, 5 Mar 2010 21:43:46 +0000 (13:43 -0800)]
mmc: enable DMA on Ricoh sdhci reader by default
This card reader doesn't advertise, however DMA works well. Probably
windows SDHCI driver assumes that all readers support DMA and thus we see
that bug.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Tested-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Harald Welte <HaraldWelte@viatech.com>
Cc: Norbert Preining <preining@logic.at>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nicolas Ferre [Fri, 5 Mar 2010 21:43:45 +0000 (13:43 -0800)]
mmc: at91_mci: correct kunmap_atomic()
kunmap_atomic() accepts a pointer to any location in the page so we do not
need the subtraction and cast.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Wolfgang Muees <wolfgang.mues@auerswald.de>
Cc: Andrew Victor <avictor.za@gmail.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nicolas Ferre [Fri, 5 Mar 2010 21:43:44 +0000 (13:43 -0800)]
mmc: at91_mci: introduce per-mci-revision conditional code
We used to manage features and differences on a per-cpu basis. As several
cpus share the same mci revision, this patch aggregates cpus that have the
same IP revision in one defined constant. We use the
at91mci_is_mci1rev2xx() funtion name not to mess with newer Atmel sd/mmc
IP called "MCI2". _rev2 naming could have been confusing...
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Wolfgang Muees <wolfgang.mues@auerswald.de>
Cc: Andrew Victor <avictor.za@gmail.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nicolas Ferre [Fri, 5 Mar 2010 21:43:43 +0000 (13:43 -0800)]
mmc: at91_mci: Enable MMC_CAP_SDIO_IRQ only when it actually works.
According to the datasheets AT91SAM9261 does not support SDIO interrupts,
and AT91SAM9260/9263 have an erratum requiring 4bit mode while using slot
B for the interrupt to work.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Wolfgang Muees <wolfgang.mues@auerswald.de>
Cc: Andrew Victor <avictor.za@gmail.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Wolfgang Muees [Fri, 5 Mar 2010 21:43:42 +0000 (13:43 -0800)]
mmc: at91_mci: enable large data blocks
This patch is setting some max_ variables for the IO elevator, so the
elevator will put requests for large data blocks to the driver. This is
critical for
a) speed
and
b) wear leveling of the flash chip controller: Otherwise the controller
will treat the SD card badly with millions of single 4 KByte write
commands. This will lead to a shorter life time for the SD cards.
Signed-off-by: Wolfgang Muees <wolfgang.mues@auerswald.de>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Andrew Victor <avictor.za@gmail.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Wolfgang Muees [Fri, 5 Mar 2010 21:43:41 +0000 (13:43 -0800)]
mmc: at91_mci: use DMA buffer for read
Convert the read to use the DMA buffer as well. The old code was doing
double-buffering DMA with the PDC; no way to make it work. Replace it
with a single-PDC approach. It also simplify things removing the need for
a pre_dma_read() function.
[nicolas.ferre@atmel.com coding style modifications]
Signed-off-by: Wolfgang Muees <wolfgang.mues@auerswald.de>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Andrew Victor <avictor.za@gmail.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Wolfgang Muees [Fri, 5 Mar 2010 21:43:40 +0000 (13:43 -0800)]
mmc: at91_mci: use one coherent DMA buffer
The TX DMA buffer is allocated only once, because the
allocation/deallocation of the buffer for EACH chunk of data is
time-consuming and prone to memory fragmentation.
Using a coherent DMA buffer avoids extra data cache calls.
[nicolas.ferre@atmel.com: coding style modifications]
Signed-off-by: Wolfgang Muees <wolfgang.mues@auerswald.de>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Andrew Victor <avictor.za@gmail.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Wolfgang Muees [Fri, 5 Mar 2010 21:43:39 +0000 (13:43 -0800)]
mmc: at91_mci: fix timeout errors
Fix two timeout errors, one for slow SDHC cards and one for slow users
while inserting SD cards.
Signed-off-by: Wolfgang Muees <wolfgang.mues@auerswald.de>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Andrew Victor <avictor.za@gmail.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Wolfgang Muees [Fri, 5 Mar 2010 21:43:38 +0000 (13:43 -0800)]
mmc: at91_mci: fix pointer errors
Fixes two pointer errors, one which leads to memory overwrites if used
with large chunks of data.
Signed-off-by: Wolfgang Muees <wolfgang.mues@auerswald.de>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Andrew Victor <avictor.za@gmail.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lars-Peter Clausen [Fri, 5 Mar 2010 21:43:37 +0000 (13:43 -0800)]
s3cmci: s3cmci_card_present: Use no_detect to decide whether there is a card detect pin
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: <linux-mmc@vger.kernel.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lars-Peter Clausen [Fri, 5 Mar 2010 21:43:35 +0000 (13:43 -0800)]
s3cmci: initialize default platform data no_wprotect and no_detect with 1
If no platform_data was givin to the device it's going to use it's default
platform data struct which has all fields initialized to zero. As a
result the driver is going to try to request gpio0 both as write protect
and card detect pin. Which of course will fail and makes the driver
unusable
Previously to the introduction of no_wprotect and no_detect the behavior
was to assume that if no platform data was given there is no write protect
or card detect pin. This patch restores that behavior.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: <linux-mmc@vger.kernel.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daniel Drake [Fri, 5 Mar 2010 21:43:34 +0000 (13:43 -0800)]
sdio: put active devices into 1-bit mode during suspend
And bring them back to 4-bit mode during resume.
Signed-off-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nicolas Pitre [Fri, 5 Mar 2010 21:43:34 +0000 (13:43 -0800)]
sdio: kick the interrupt thread upon a resume
Some SDIO cards may suspend while keeping function interrupts active
especially in the powered suspend case. Upon resume we need to kick the
SDIO interrupt thread to check for pending interrupts and to restart card
IRQ detection at the host controller level.
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Chris Ball [Fri, 5 Mar 2010 21:43:33 +0000 (13:43 -0800)]
sdio: don't use CMD[357] as part of a powered SDIO resume
Seen on a Marvell 8686 SDIO card and Via VX855 controller: we must avoid
sending CMD3/5/7 on a resume where power has been maintained, because the
8686 will refuse to respond to them and the MMC stack will give up on the
card.
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nicolas Pitre [Fri, 5 Mar 2010 21:43:32 +0000 (13:43 -0800)]
sdio: sdhci support for suspend mode PM features
Tested with an XO v1.5 from OLPC.
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nicolas Pitre [Fri, 5 Mar 2010 21:43:31 +0000 (13:43 -0800)]
sdio: introduce API for special power management features
This patch series provides the core changes needed to allow SDIO cards to
remain powered and active while the host system is suspended, and let them
wake up the host system when needed. This is used to implement
wake-on-lan with SDIO wireless cards at the moment. Patches to add that
support to the libertas driver will be posted separately.
This patch:
Some SDIO cards have the ability to keep on running autonomously when the
host system is suspended, and wake it up when needed. This however
requires that the host controller preserve power to the card, and
configure itself appropriately for wake-up.
There is however 4 layers of abstractions involved: the host controller
driver, the MMC core code, the SDIO card management code, and the actual
SDIO function driver. To make things simple and manageable, host drivers
must advertise their PM capabilities with a feature bitmask, then function
drivers can query and set those features from their suspend method. Then
each layer in the suspend call chain is expected to act upon those bits
accordingly.
[akpm@linux-foundation.org: fix typo in comment]
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ben Dooks [Fri, 5 Mar 2010 21:43:29 +0000 (13:43 -0800)]
sdhci: improve sdhci sdhci_set_adma_desc() code
sdhci_set_adma_desc() is using byte-writes to write data in a specified
order into memory. Change to using __le16 for the two byte and __le32 for
the four byte cases and use the cpu_to_{le16,le32} to do the conversion
before writing.
This will reduce the size of the code and the number of writes as we no
longer need to chop the data up before writing.
As an example on ARM S3C64XX SoC, in little-endian configuration:
000000d4 <sdhci_set_adma_desc>:
- d8:
e1a0c423 lsr ip, r3, #8
- dc:
e1a0ec21 lsr lr, r1, #24
- e0:
e1a04821 lsr r4, r1, #16
- e4:
e1a05421 lsr r5, r1, #8
- e8:
e1a06442 asr r6, r2, #8
- ec:
e5c0c001 strb ip, [r0, #1]
- f0:
e5c0e007 strb lr, [r0, #7]
- f4:
e5c04006 strb r4, [r0, #6]
- f8:
e5c05005 strb r5, [r0, #5]
- fc:
e5c01004 strb r1, [r0, #4]
- 100:
e5c06003 strb r6, [r0, #3]
- 104:
e5c02002 strb r2, [r0, #2]
- 108:
e5c03000 strb r3, [r0]
+ d4:
e5801004 str r1, [r0, #4]
+ d8:
e1c030b0 strh r3, [r0]
+ dc:
e1c020b2 strh r2, [r0, #2]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>