OSDN Git Service
Eric Dumazet [Sat, 7 Apr 2018 20:42:41 +0000 (13:42 -0700)]
dccp: initialize ireq->ir_mark
commit
b855ff827476adbdc2259e9895681d82b7b26065 upstream.
syzbot reported an uninit-value read of skb->mark in iptable_mangle_hook()
Thanks to the nice report, I tracked the problem to dccp not caring
of ireq->ir_mark for passive sessions.
BUG: KMSAN: uninit-value in ipt_mangle_out net/ipv4/netfilter/iptable_mangle.c:66 [inline]
BUG: KMSAN: uninit-value in iptable_mangle_hook+0x5e5/0x720 net/ipv4/netfilter/iptable_mangle.c:84
CPU: 0 PID: 5300 Comm: syz-executor3 Not tainted 4.16.0+ #81
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:53
kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
__msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676
ipt_mangle_out net/ipv4/netfilter/iptable_mangle.c:66 [inline]
iptable_mangle_hook+0x5e5/0x720 net/ipv4/netfilter/iptable_mangle.c:84
nf_hook_entry_hookfn include/linux/netfilter.h:120 [inline]
nf_hook_slow+0x158/0x3d0 net/netfilter/core.c:483
nf_hook include/linux/netfilter.h:243 [inline]
__ip_local_out net/ipv4/ip_output.c:113 [inline]
ip_local_out net/ipv4/ip_output.c:122 [inline]
ip_queue_xmit+0x1d21/0x21c0 net/ipv4/ip_output.c:504
dccp_transmit_skb+0x15eb/0x1900 net/dccp/output.c:142
dccp_xmit_packet+0x814/0x9e0 net/dccp/output.c:281
dccp_write_xmit+0x20f/0x480 net/dccp/output.c:363
dccp_sendmsg+0x12ca/0x12d0 net/dccp/proto.c:818
inet_sendmsg+0x48d/0x740 net/ipv4/af_inet.c:764
sock_sendmsg_nosec net/socket.c:630 [inline]
sock_sendmsg net/socket.c:640 [inline]
___sys_sendmsg+0xec0/0x1310 net/socket.c:2046
__sys_sendmsg net/socket.c:2080 [inline]
SYSC_sendmsg+0x2a3/0x3d0 net/socket.c:2091
SyS_sendmsg+0x54/0x80 net/socket.c:2087
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x455259
RSP: 002b:
00007f1a4473dc68 EFLAGS:
00000246 ORIG_RAX:
000000000000002e
RAX:
ffffffffffffffda RBX:
00007f1a4473e6d4 RCX:
0000000000455259
RDX:
0000000000000000 RSI:
0000000020b76fc8 RDI:
0000000000000015
RBP:
000000000072bea0 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
00000000ffffffff
R13:
00000000000004f0 R14:
00000000006fa720 R15:
0000000000000000
Uninit was stored to memory at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline]
kmsan_save_stack mm/kmsan/kmsan.c:293 [inline]
kmsan_internal_chain_origin+0x12b/0x210 mm/kmsan/kmsan.c:684
__msan_chain_origin+0x69/0xc0 mm/kmsan/kmsan_instr.c:521
ip_queue_xmit+0x1e35/0x21c0 net/ipv4/ip_output.c:502
dccp_transmit_skb+0x15eb/0x1900 net/dccp/output.c:142
dccp_xmit_packet+0x814/0x9e0 net/dccp/output.c:281
dccp_write_xmit+0x20f/0x480 net/dccp/output.c:363
dccp_sendmsg+0x12ca/0x12d0 net/dccp/proto.c:818
inet_sendmsg+0x48d/0x740 net/ipv4/af_inet.c:764
sock_sendmsg_nosec net/socket.c:630 [inline]
sock_sendmsg net/socket.c:640 [inline]
___sys_sendmsg+0xec0/0x1310 net/socket.c:2046
__sys_sendmsg net/socket.c:2080 [inline]
SYSC_sendmsg+0x2a3/0x3d0 net/socket.c:2091
SyS_sendmsg+0x54/0x80 net/socket.c:2087
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
Uninit was stored to memory at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline]
kmsan_save_stack mm/kmsan/kmsan.c:293 [inline]
kmsan_internal_chain_origin+0x12b/0x210 mm/kmsan/kmsan.c:684
__msan_chain_origin+0x69/0xc0 mm/kmsan/kmsan_instr.c:521
inet_csk_clone_lock+0x503/0x580 net/ipv4/inet_connection_sock.c:797
dccp_create_openreq_child+0x7f/0x890 net/dccp/minisocks.c:92
dccp_v4_request_recv_sock+0x22c/0xe90 net/dccp/ipv4.c:408
dccp_v6_request_recv_sock+0x290/0x2000 net/dccp/ipv6.c:414
dccp_check_req+0x7b9/0x8f0 net/dccp/minisocks.c:197
dccp_v4_rcv+0x12e4/0x2630 net/dccp/ipv4.c:840
ip_local_deliver_finish+0x6ed/0xd40 net/ipv4/ip_input.c:216
NF_HOOK include/linux/netfilter.h:288 [inline]
ip_local_deliver+0x43c/0x4e0 net/ipv4/ip_input.c:257
dst_input include/net/dst.h:449 [inline]
ip_rcv_finish+0x1253/0x16d0 net/ipv4/ip_input.c:397
NF_HOOK include/linux/netfilter.h:288 [inline]
ip_rcv+0x119d/0x16f0 net/ipv4/ip_input.c:493
__netif_receive_skb_core+0x47cf/0x4a80 net/core/dev.c:4562
__netif_receive_skb net/core/dev.c:4627 [inline]
process_backlog+0x62d/0xe20 net/core/dev.c:5307
napi_poll net/core/dev.c:5705 [inline]
net_rx_action+0x7c1/0x1a70 net/core/dev.c:5771
__do_softirq+0x56d/0x93d kernel/softirq.c:285
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline]
kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188
kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314
kmem_cache_alloc+0xaab/0xb90 mm/slub.c:2756
reqsk_alloc include/net/request_sock.h:88 [inline]
inet_reqsk_alloc+0xc4/0x7f0 net/ipv4/tcp_input.c:6145
dccp_v4_conn_request+0x5cc/0x1770 net/dccp/ipv4.c:600
dccp_v6_conn_request+0x299/0x1880 net/dccp/ipv6.c:317
dccp_rcv_state_process+0x2ea/0x2410 net/dccp/input.c:612
dccp_v4_do_rcv+0x229/0x340 net/dccp/ipv4.c:682
dccp_v6_do_rcv+0x16d/0x1220 net/dccp/ipv6.c:578
sk_backlog_rcv include/net/sock.h:908 [inline]
__sk_receive_skb+0x60e/0xf20 net/core/sock.c:513
dccp_v4_rcv+0x24d4/0x2630 net/dccp/ipv4.c:874
ip_local_deliver_finish+0x6ed/0xd40 net/ipv4/ip_input.c:216
NF_HOOK include/linux/netfilter.h:288 [inline]
ip_local_deliver+0x43c/0x4e0 net/ipv4/ip_input.c:257
dst_input include/net/dst.h:449 [inline]
ip_rcv_finish+0x1253/0x16d0 net/ipv4/ip_input.c:397
NF_HOOK include/linux/netfilter.h:288 [inline]
ip_rcv+0x119d/0x16f0 net/ipv4/ip_input.c:493
__netif_receive_skb_core+0x47cf/0x4a80 net/core/dev.c:4562
__netif_receive_skb net/core/dev.c:4627 [inline]
process_backlog+0x62d/0xe20 net/core/dev.c:5307
napi_poll net/core/dev.c:5705 [inline]
net_rx_action+0x7c1/0x1a70 net/core/dev.c:5771
__do_softirq+0x56d/0x93d kernel/softirq.c:285
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Sat, 7 Apr 2018 20:42:40 +0000 (13:42 -0700)]
net: fix uninit-value in __hw_addr_add_ex()
commit
77d36398d99f2565c0a8d43a86fd520a82e64bb8 upstream.
syzbot complained :
BUG: KMSAN: uninit-value in memcmp+0x119/0x180 lib/string.c:861
CPU: 0 PID: 3 Comm: kworker/0:0 Not tainted 4.16.0+ #82
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:53
kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
__msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676
memcmp+0x119/0x180 lib/string.c:861
__hw_addr_add_ex net/core/dev_addr_lists.c:60 [inline]
__dev_mc_add+0x1c2/0x8e0 net/core/dev_addr_lists.c:670
dev_mc_add+0x6d/0x80 net/core/dev_addr_lists.c:687
igmp6_group_added+0x2db/0xa00 net/ipv6/mcast.c:662
ipv6_dev_mc_inc+0xe9e/0x1130 net/ipv6/mcast.c:914
addrconf_join_solict net/ipv6/addrconf.c:2078 [inline]
addrconf_dad_begin net/ipv6/addrconf.c:3828 [inline]
addrconf_dad_work+0x427/0x2150 net/ipv6/addrconf.c:3954
process_one_work+0x12c6/0x1f60 kernel/workqueue.c:2113
worker_thread+0x113c/0x24f0 kernel/workqueue.c:2247
kthread+0x539/0x720 kernel/kthread.c:239
Fixes:
f001fde5eadd ("net: introduce a list of device addresses dev_addr_list (v6)")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Sat, 7 Apr 2018 20:42:39 +0000 (13:42 -0700)]
net: initialize skb->peeked when cloning
commit
b13dda9f9aa7caceeee61c080c2e544d5f5d85e5 upstream.
syzbot reported __skb_try_recv_from_queue() was using skb->peeked
while it was potentially unitialized.
We need to clear it in __skb_clone()
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Sat, 7 Apr 2018 20:42:38 +0000 (13:42 -0700)]
net: fix rtnh_ok()
commit
b1993a2de12c9e75c35729e2ffbc3a92d50c0d31 upstream.
syzbot reported :
BUG: KMSAN: uninit-value in rtnh_ok include/net/nexthop.h:11 [inline]
BUG: KMSAN: uninit-value in fib_count_nexthops net/ipv4/fib_semantics.c:469 [inline]
BUG: KMSAN: uninit-value in fib_create_info+0x554/0x8d20 net/ipv4/fib_semantics.c:1091
@remaining is an integer, coming from user space.
If it is negative we want rtnh_ok() to return false.
Fixes:
4e902c57417c ("[IPv4]: FIB configuration using struct fib_config")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Sat, 7 Apr 2018 20:42:37 +0000 (13:42 -0700)]
netlink: fix uninit-value in netlink_sendmsg
commit
6091f09c2f79730d895149bcfe3d66140288cd0e upstream.
syzbot reported :
BUG: KMSAN: uninit-value in ffs arch/x86/include/asm/bitops.h:432 [inline]
BUG: KMSAN: uninit-value in netlink_sendmsg+0xb26/0x1310 net/netlink/af_netlink.c:1851
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Sat, 7 Apr 2018 20:42:36 +0000 (13:42 -0700)]
crypto: af_alg - fix possible uninit-value in alg_bind()
commit
a466856e0b7ab269cdf9461886d007e88ff575b0 upstream.
syzbot reported :
BUG: KMSAN: uninit-value in alg_bind+0xe3/0xd90 crypto/af_alg.c:162
We need to check addr_len before dereferencing sa (or uaddr)
Fixes:
bb30b8848c85 ("crypto: af_alg - whitelist mask and type")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Stephan Mueller <smueller@chronox.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Julian Anastasov [Sat, 7 Apr 2018 12:50:47 +0000 (15:50 +0300)]
ipvs: fix rtnl_lock lockups caused by start_sync_thread
commit
5c64576a77894a50be80be0024bed27171b55989 upstream.
syzkaller reports for wrong rtnl_lock usage in sync code [1] and [2]
We have 2 problems in start_sync_thread if error path is
taken, eg. on memory allocation error or failure to configure
sockets for mcast group or addr/port binding:
1. recursive locking: holding rtnl_lock while calling sock_release
which in turn calls again rtnl_lock in ip_mc_drop_socket to leave
the mcast group, as noticed by Florian Westphal. Additionally,
sock_release can not be called while holding sync_mutex (ABBA
deadlock).
2. task hung: holding rtnl_lock while calling kthread_stop to
stop the running kthreads. As the kthreads do the same to leave
the mcast group (sock_release -> ip_mc_drop_socket -> rtnl_lock)
they hang.
Fix the problems by calling rtnl_unlock early in the error path,
now sock_release is called after unlocking both mutexes.
Problem 3 (task hung reported by syzkaller [2]) is variant of
problem 2: use _trylock to prevent one user to call rtnl_lock and
then while waiting for sync_mutex to block kthreads that execute
sock_release when they are stopped by stop_sync_thread.
[1]
IPVS: stopping backup sync thread 4500 ...
WARNING: possible recursive locking detected
4.16.0-rc7+ #3 Not tainted
--------------------------------------------
syzkaller688027/4497 is trying to acquire lock:
(rtnl_mutex){+.+.}, at: [<
00000000bb14d7fb>] rtnl_lock+0x17/0x20
net/core/rtnetlink.c:74
but task is already holding lock:
IPVS: stopping backup sync thread 4495 ...
(rtnl_mutex){+.+.}, at: [<
00000000bb14d7fb>] rtnl_lock+0x17/0x20
net/core/rtnetlink.c:74
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(rtnl_mutex);
lock(rtnl_mutex);
*** DEADLOCK ***
May be due to missing lock nesting notation
2 locks held by syzkaller688027/4497:
#0: (rtnl_mutex){+.+.}, at: [<
00000000bb14d7fb>] rtnl_lock+0x17/0x20
net/core/rtnetlink.c:74
#1: (ipvs->sync_mutex){+.+.}, at: [<
00000000703f78e3>]
do_ip_vs_set_ctl+0x10f8/0x1cc0 net/netfilter/ipvs/ip_vs_ctl.c:2388
stack backtrace:
CPU: 1 PID: 4497 Comm: syzkaller688027 Not tainted 4.16.0-rc7+ #3
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x194/0x24d lib/dump_stack.c:53
print_deadlock_bug kernel/locking/lockdep.c:1761 [inline]
check_deadlock kernel/locking/lockdep.c:1805 [inline]
validate_chain kernel/locking/lockdep.c:2401 [inline]
__lock_acquire+0xe8f/0x3e00 kernel/locking/lockdep.c:3431
lock_acquire+0x1d5/0x580 kernel/locking/lockdep.c:3920
__mutex_lock_common kernel/locking/mutex.c:756 [inline]
__mutex_lock+0x16f/0x1a80 kernel/locking/mutex.c:893
mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:908
rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74
ip_mc_drop_socket+0x88/0x230 net/ipv4/igmp.c:2643
inet_release+0x4e/0x1c0 net/ipv4/af_inet.c:413
sock_release+0x8d/0x1e0 net/socket.c:595
start_sync_thread+0x2213/0x2b70 net/netfilter/ipvs/ip_vs_sync.c:1924
do_ip_vs_set_ctl+0x1139/0x1cc0 net/netfilter/ipvs/ip_vs_ctl.c:2389
nf_sockopt net/netfilter/nf_sockopt.c:106 [inline]
nf_setsockopt+0x67/0xc0 net/netfilter/nf_sockopt.c:115
ip_setsockopt+0x97/0xa0 net/ipv4/ip_sockglue.c:1261
udp_setsockopt+0x45/0x80 net/ipv4/udp.c:2406
sock_common_setsockopt+0x95/0xd0 net/core/sock.c:2975
SYSC_setsockopt net/socket.c:1849 [inline]
SyS_setsockopt+0x189/0x360 net/socket.c:1828
do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x446a69
RSP: 002b:
00007fa1c3a64da8 EFLAGS:
00000246 ORIG_RAX:
0000000000000036
RAX:
ffffffffffffffda RBX:
0000000000000000 RCX:
0000000000446a69
RDX:
000000000000048b RSI:
0000000000000000 RDI:
0000000000000003
RBP:
00000000006e29fc R08:
0000000000000018 R09:
0000000000000000
R10:
00000000200000c0 R11:
0000000000000246 R12:
00000000006e29f8
R13:
00676e697279656b R14:
00007fa1c3a659c0 R15:
00000000006e2b60
[2]
IPVS: sync thread started: state = BACKUP, mcast_ifn = syz_tun, syncid = 4,
id = 0
IPVS: stopping backup sync thread 25415 ...
INFO: task syz-executor7:25421 blocked for more than 120 seconds.
Not tainted 4.16.0-rc6+ #284
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
syz-executor7 D23688 25421 4408 0x00000004
Call Trace:
context_switch kernel/sched/core.c:2862 [inline]
__schedule+0x8fb/0x1ec0 kernel/sched/core.c:3440
schedule+0xf5/0x430 kernel/sched/core.c:3499
schedule_timeout+0x1a3/0x230 kernel/time/timer.c:1777
do_wait_for_common kernel/sched/completion.c:86 [inline]
__wait_for_common kernel/sched/completion.c:107 [inline]
wait_for_common kernel/sched/completion.c:118 [inline]
wait_for_completion+0x415/0x770 kernel/sched/completion.c:139
kthread_stop+0x14a/0x7a0 kernel/kthread.c:530
stop_sync_thread+0x3d9/0x740 net/netfilter/ipvs/ip_vs_sync.c:1996
do_ip_vs_set_ctl+0x2b1/0x1cc0 net/netfilter/ipvs/ip_vs_ctl.c:2394
nf_sockopt net/netfilter/nf_sockopt.c:106 [inline]
nf_setsockopt+0x67/0xc0 net/netfilter/nf_sockopt.c:115
ip_setsockopt+0x97/0xa0 net/ipv4/ip_sockglue.c:1253
sctp_setsockopt+0x2ca/0x63e0 net/sctp/socket.c:4154
sock_common_setsockopt+0x95/0xd0 net/core/sock.c:3039
SYSC_setsockopt net/socket.c:1850 [inline]
SyS_setsockopt+0x189/0x360 net/socket.c:1829
do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x454889
RSP: 002b:
00007fc927626c68 EFLAGS:
00000246 ORIG_RAX:
0000000000000036
RAX:
ffffffffffffffda RBX:
00007fc9276276d4 RCX:
0000000000454889
RDX:
000000000000048c RSI:
0000000000000000 RDI:
0000000000000017
RBP:
000000000072bf58 R08:
0000000000000018 R09:
0000000000000000
R10:
0000000020000000 R11:
0000000000000246 R12:
00000000ffffffff
R13:
000000000000051c R14:
00000000006f9b40 R15:
0000000000000001
Showing all locks held in the system:
2 locks held by khungtaskd/868:
#0: (rcu_read_lock){....}, at: [<
00000000a1a8f002>]
check_hung_uninterruptible_tasks kernel/hung_task.c:175 [inline]
#0: (rcu_read_lock){....}, at: [<
00000000a1a8f002>] watchdog+0x1c5/0xd60
kernel/hung_task.c:249
#1: (tasklist_lock){.+.+}, at: [<
0000000037c2f8f9>]
debug_show_all_locks+0xd3/0x3d0 kernel/locking/lockdep.c:4470
1 lock held by rsyslogd/4247:
#0: (&f->f_pos_lock){+.+.}, at: [<
000000000d8d6983>]
__fdget_pos+0x12b/0x190 fs/file.c:765
2 locks held by getty/4338:
#0: (&tty->ldisc_sem){++++}, at: [<
00000000bee98654>]
ldsem_down_read+0x37/0x40 drivers/tty/tty_ldsem.c:365
#1: (&ldata->atomic_read_lock){+.+.}, at: [<
00000000c1d180aa>]
n_tty_read+0x2ef/0x1a40 drivers/tty/n_tty.c:2131
2 locks held by getty/4339:
#0: (&tty->ldisc_sem){++++}, at: [<
00000000bee98654>]
ldsem_down_read+0x37/0x40 drivers/tty/tty_ldsem.c:365
#1: (&ldata->atomic_read_lock){+.+.}, at: [<
00000000c1d180aa>]
n_tty_read+0x2ef/0x1a40 drivers/tty/n_tty.c:2131
2 locks held by getty/4340:
#0: (&tty->ldisc_sem){++++}, at: [<
00000000bee98654>]
ldsem_down_read+0x37/0x40 drivers/tty/tty_ldsem.c:365
#1: (&ldata->atomic_read_lock){+.+.}, at: [<
00000000c1d180aa>]
n_tty_read+0x2ef/0x1a40 drivers/tty/n_tty.c:2131
2 locks held by getty/4341:
#0: (&tty->ldisc_sem){++++}, at: [<
00000000bee98654>]
ldsem_down_read+0x37/0x40 drivers/tty/tty_ldsem.c:365
#1: (&ldata->atomic_read_lock){+.+.}, at: [<
00000000c1d180aa>]
n_tty_read+0x2ef/0x1a40 drivers/tty/n_tty.c:2131
2 locks held by getty/4342:
#0: (&tty->ldisc_sem){++++}, at: [<
00000000bee98654>]
ldsem_down_read+0x37/0x40 drivers/tty/tty_ldsem.c:365
#1: (&ldata->atomic_read_lock){+.+.}, at: [<
00000000c1d180aa>]
n_tty_read+0x2ef/0x1a40 drivers/tty/n_tty.c:2131
2 locks held by getty/4343:
#0: (&tty->ldisc_sem){++++}, at: [<
00000000bee98654>]
ldsem_down_read+0x37/0x40 drivers/tty/tty_ldsem.c:365
#1: (&ldata->atomic_read_lock){+.+.}, at: [<
00000000c1d180aa>]
n_tty_read+0x2ef/0x1a40 drivers/tty/n_tty.c:2131
2 locks held by getty/4344:
#0: (&tty->ldisc_sem){++++}, at: [<
00000000bee98654>]
ldsem_down_read+0x37/0x40 drivers/tty/tty_ldsem.c:365
#1: (&ldata->atomic_read_lock){+.+.}, at: [<
00000000c1d180aa>]
n_tty_read+0x2ef/0x1a40 drivers/tty/n_tty.c:2131
3 locks held by kworker/0:5/6494:
#0: ((wq_completion)"%s"("ipv6_addrconf")){+.+.}, at:
[<
00000000a062b18e>] work_static include/linux/workqueue.h:198 [inline]
#0: ((wq_completion)"%s"("ipv6_addrconf")){+.+.}, at:
[<
00000000a062b18e>] set_work_data kernel/workqueue.c:619 [inline]
#0: ((wq_completion)"%s"("ipv6_addrconf")){+.+.}, at:
[<
00000000a062b18e>] set_work_pool_and_clear_pending kernel/workqueue.c:646
[inline]
#0: ((wq_completion)"%s"("ipv6_addrconf")){+.+.}, at:
[<
00000000a062b18e>] process_one_work+0xb12/0x1bb0 kernel/workqueue.c:2084
#1: ((addr_chk_work).work){+.+.}, at: [<
00000000278427d5>]
process_one_work+0xb89/0x1bb0 kernel/workqueue.c:2088
#2: (rtnl_mutex){+.+.}, at: [<
00000000066e35ac>] rtnl_lock+0x17/0x20
net/core/rtnetlink.c:74
1 lock held by syz-executor7/25421:
#0: (ipvs->sync_mutex){+.+.}, at: [<
00000000d414a689>]
do_ip_vs_set_ctl+0x277/0x1cc0 net/netfilter/ipvs/ip_vs_ctl.c:2393
2 locks held by syz-executor7/25427:
#0: (rtnl_mutex){+.+.}, at: [<
00000000066e35ac>] rtnl_lock+0x17/0x20
net/core/rtnetlink.c:74
#1: (ipvs->sync_mutex){+.+.}, at: [<
00000000e6d48489>]
do_ip_vs_set_ctl+0x10f8/0x1cc0 net/netfilter/ipvs/ip_vs_ctl.c:2388
1 lock held by syz-executor7/25435:
#0: (rtnl_mutex){+.+.}, at: [<
00000000066e35ac>] rtnl_lock+0x17/0x20
net/core/rtnetlink.c:74
1 lock held by ipvs-b:2:0/25415:
#0: (rtnl_mutex){+.+.}, at: [<
00000000066e35ac>] rtnl_lock+0x17/0x20
net/core/rtnetlink.c:74
Reported-and-tested-by: syzbot+a46d6abf9d56b1365a72@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+5fe074c01b2032ce9618@syzkaller.appspotmail.com
Fixes:
e0b26cc997d5 ("ipvs: call rtnl_lock early")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Zubin Mithra <zsm@chromium.org>
Cc: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bin Liu [Mon, 30 Apr 2018 16:20:53 +0000 (11:20 -0500)]
usb: musb: host: fix potential NULL pointer dereference
commit
2b63f1329df2cd814c1f8353fae4853ace6521d1 upstream.
musb_start_urb() doesn't check the pass-in parameter if it is NULL. But
in musb_bulk_nak_timeout() the parameter passed to musb_start_urb() is
returned from first_qh(), which could be NULL.
So wrap the musb_start_urb() call here with a if condition check to
avoid the potential NULL pointer dereference.
Fixes:
f283862f3b5c ("usb: musb: NAK timeout scheme on bulk TX endpoint")
Cc: stable@vger.kernel.org # v3.7+
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SZ Lin (林上智) [Thu, 26 Apr 2018 06:28:31 +0000 (14:28 +0800)]
USB: serial: option: adding support for ublox R410M
commit
4205cb01f6e9ef2ae6daa7be4e8ac1edeb4c9d64 upstream.
This patch adds support for ublox R410M PID 0x90b2 USB modem to option
driver, this module supports LTE Cat M1 / NB1.
Interface layout:
0: QCDM/DIAG
1: ADB
2: AT
3: RMNET
Signed-off-by: SZ Lin (林上智) <sz.lin@moxa.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Wed, 7 Mar 2018 16:40:48 +0000 (17:40 +0100)]
USB: serial: option: reimplement interface masking
commit
c3a65808f04a8426481b63a4fbd9392f009f6330 upstream.
Reimplement interface masking using device flags stored directly in the
device-id table. This will make it easier to add and maintain device-id
entries by using a more compact and readable notation compared to the
current implementation (which manages pairs of masks in separate
blacklist structs).
Two convenience macros are used to flag an interface as either reserved
or as not supporting modem-control requests:
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),
.driver_info = NCTRL(0) | RSVD(3) },
For now, we limit the highest maskable interface number to seven, which
allows for (up to 16) additional device flags to be added later should
need arise.
Note that this will likely need to be backported to stable in order to
make future device-id backports more manageable.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan Stern [Thu, 3 May 2018 15:04:48 +0000 (11:04 -0400)]
USB: Accept bulk endpoints with 1024-byte maxpacket
commit
fb5ee84ea72c5f1b6cabdd1c9d6e8648995ca7c6 upstream.
Some non-compliant high-speed USB devices have bulk endpoints with a
1024-byte maxpacket size. Although such endpoints don't work with
xHCI host controllers, they do work with EHCI controllers. We used to
accept these invalid sizes (with a warning), but we no longer do
because of an unintentional change introduced by commit
aed9d65ac327
("USB: validate wMaxPacketValue entries in endpoint descriptors").
This patch restores the old behavior, so that people with these
peculiar devices can use them without patching their kernels by hand.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Suggested-by: Elvinas <elvinas@veikia.lt>
Fixes:
aed9d65ac327 ("USB: validate wMaxPacketValue entries in endpoint descriptors")
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sun, 29 Apr 2018 15:41:55 +0000 (17:41 +0200)]
USB: serial: visor: handle potential invalid device configuration
commit
4842ed5bfcb9daf6660537d70503c18d38dbdbb8 upstream.
If we get an invalid device configuration from a palm 3 type device, we
might incorrectly parse things, and we have the potential to crash in
"interesting" ways.
Fix this up by verifying the size of the configuration passed to us by
the device, and only if it is correct, will we handle it.
Note that this also fixes an information leak of slab data.
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ johan: add comment about the info leak ]
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Hutchings [Wed, 4 Apr 2018 20:38:49 +0000 (22:38 +0200)]
test_firmware: fix setting old custom fw path back on exit, second try
commit
e538409257d0217a9bc715686100a5328db75a15 upstream.
Commit
65c79230576 tried to clear the custom firmware path on exit by
writing a single space to the firmware_class.path parameter. This
doesn't work because nothing strips this space from the value stored
and fw_get_filesystem_firmware() only ignores zero-length paths.
Instead, write a null byte.
Fixes:
0a8adf58475 ("test: add firmware_class loader test")
Fixes:
65c79230576 ("test_firmware: fix setting old custom fw path back on exit")
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Acked-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Hellstrom [Thu, 26 Apr 2018 07:59:30 +0000 (09:59 +0200)]
drm/vmwgfx: Fix a buffer object leak
commit
13f149d47392782baafd96d54d4e65f3b5ca342f upstream.
A buffer object leak was introduced when fixing a premature buffer
object release. Fix this.
Cc: <stable@vger.kernel.org>
Fixes:
73a88250b709 ("Fix a destoy-while-held mutex problem.")
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Danit Goldberg [Mon, 23 Apr 2018 14:01:54 +0000 (17:01 +0300)]
IB/mlx5: Use unlimited rate when static rate is not supported
commit
4f32ac2e452c2180cd2df581cbadac183e27ecd0 upstream.
Before the change, if the user passed a static rate value different
than zero and the FW doesn't support static rate,
it would end up configuring rate of 2.5 GBps.
Fix this by using rate 0; unlimited, in cases where FW
doesn't support static rate configuration.
Cc: <stable@vger.kernel.org> # 3.10
Fixes:
e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SZ Lin (林上智) [Thu, 26 Apr 2018 06:30:13 +0000 (14:30 +0800)]
NET: usb: qmi_wwan: add support for ublox R410M PID 0x90b2
commit
9306b38e42cb266f98bff6f6f4c1c652aa79ba45 upstream.
This patch adds support for PID 0x90b2 of ublox R410M.
qmicli -d /dev/cdc-wdm0 --dms-get-manufacturer
[/dev/cdc-wdm0] Device manufacturer retrieved:
Manufacturer: 'u-blox'
qmicli -d /dev/cdc-wdm0 --dms-get-model
[/dev/cdc-wdm0] Device model retrieved:
Model: 'SARA-R410M-02B'
Signed-off-by: SZ Lin (林上智) <sz.lin@moxa.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leon Romanovsky [Mon, 23 Apr 2018 14:01:53 +0000 (17:01 +0300)]
RDMA/mlx5: Protect from shift operand overflow
commit
002bf2282b2d7318e444dca9ffcb994afc5d5f15 upstream.
Ensure that user didn't supply values too large that can cause overflow.
UBSAN: Undefined behaviour in drivers/infiniband/hw/mlx5/qp.c:263:23
shift exponent -
2147483648 is negative
CPU: 0 PID: 292 Comm: syzkaller612609 Not tainted 4.16.0-rc1+ #131
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 Call
Trace:
dump_stack+0xde/0x164
ubsan_epilogue+0xe/0x81
set_rq_size+0x7c2/0xa90
create_qp_common+0xc18/0x43c0
mlx5_ib_create_qp+0x379/0x1ca0
create_qp.isra.5+0xc94/0x2260
ib_uverbs_create_qp+0x21b/0x2a0
ib_uverbs_write+0xc2c/0x1010
vfs_write+0x1b0/0x550
SyS_write+0xc7/0x1a0
do_syscall_64+0x1aa/0x740
entry_SYSCALL_64_after_hwframe+0x26/0x9b
RIP: 0033:0x433569
RSP: 002b:
00007ffc6e62f448 EFLAGS:
00000217 ORIG_RAX:
0000000000000001
RAX:
ffffffffffffffda RBX:
00000000004002f8 RCX:
0000000000433569
RDX:
0000000000000070 RSI:
00000000200042c0 RDI:
0000000000000003
RBP:
00000000006d5018 R08:
00000000004002f8 R09:
00000000004002f8
R10:
00000000004002f8 R11:
0000000000000217 R12:
0000000000000000
R13:
000000000040c9f0 R14:
000000000040ca80 R15:
0000000000000006
Cc: <stable@vger.kernel.org> # 3.10
Fixes:
e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Cc: syzkaller <syzkaller@googlegroups.com>
Reported-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Roland Dreier [Thu, 19 Apr 2018 15:28:11 +0000 (08:28 -0700)]
RDMA/ucma: Allow resolving address w/o specifying source address
commit
09abfe7b5b2f442a85f4c4d59ecf582ad76088d7 upstream.
The RDMA CM will select a source device and address by consulting
the routing table if no source address is passed into
rdma_resolve_address(). Userspace will ask for this by passing an
all-zero source address in the RESOLVE_IP command. Unfortunately
the new check for non-zero address size rejects this with EINVAL,
which breaks valid userspace applications.
Fix this by explicitly allowing a zero address family for the source.
Fixes:
2975d5de6428 ("RDMA/ucma: Check AF family prior resolving address")
Cc: <stable@vger.kernel.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Darrick J. Wong [Tue, 17 Apr 2018 06:07:45 +0000 (23:07 -0700)]
xfs: prevent creating negative-sized file via INSERT_RANGE
commit
7d83fb14258b9961920cd86f0b921caaeb3ebe85 upstream.
During the "insert range" fallocate operation, i_size grows by the
specified 'len' bytes. XFS verifies that i_size + len < s_maxbytes, as
it should. But this comparison is done using the signed 'loff_t', and
'i_size + len' can wrap around to a negative value, causing the check to
incorrectly pass, resulting in an inode with "negative" i_size. This is
possible on 64-bit platforms, where XFS sets s_maxbytes = LLONG_MAX.
ext4 and f2fs don't run into this because they set a smaller s_maxbytes.
Fix it by using subtraction instead.
Reproducer:
xfs_io -f file -c "truncate $(((1<<63)-1))" -c "finsert 0 4096"
Fixes:
a904b1ca5751 ("xfs: Add support FALLOC_FL_INSERT_RANGE for fallocate")
Cc: <stable@vger.kernel.org> # v4.1+
Originally-From: Eric Biggers <ebiggers@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: fix signed integer addition overflow too]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vittorio Gambaletta (VittGam) [Wed, 25 Apr 2018 22:22:13 +0000 (15:22 -0700)]
Input: atmel_mxt_ts - add touchpad button mapping for Samsung Chromebook Pro
commit
f372b81101e6895252298e563d634d5e44ae81e7 upstream.
This patch adds the correct platform data information for the Caroline
Chromebook, so that the mouse button does not get stuck in pressed state
after the first click.
The Samus button keymap and platform data definition are the correct
ones for Caroline, so they have been reused here.
Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Signed-off-by: Salvatore Bellizzi <lkml@seppia.net>
Tested-by: Guenter Roeck <groeck@chromium.org>
Cc: stable@vger.kernel.org
[dtor: adjusted vendor spelling to match shipping firmware]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Torokhov [Fri, 6 Apr 2018 17:23:05 +0000 (10:23 -0700)]
Input: leds - fix out of bound access
commit
6bd6ae639683c0b41f46990d5c64ff9fbfa019dc upstream.
UI_SET_LEDBIT ioctl() causes the following KASAN splat when used with
led > LED_CHARGING:
[ 1274.663418] BUG: KASAN: slab-out-of-bounds in input_leds_connect+0x611/0x730 [input_leds]
[ 1274.663426] Write of size 8 at addr
ffff88003377b2c0 by task ckb-next-daemon/5128
This happens because we were writing to the led structure before making
sure that it exists.
Reported-by: Tasos Sahanidis <tasos@tasossah.com>
Tested-by: Tasos Sahanidis <tasos@tasossah.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mathieu Desnoyers [Thu, 15 Mar 2018 12:44:24 +0000 (08:44 -0400)]
tracepoint: Do not warn on ENOMEM
commit
d66a270be3310d7aa132fec0cea77d3d32a0ff75 upstream.
Tracepoint should only warn when a kernel API user does not respect the
required preconditions (e.g. same tracepoint enabled twice, or called
to remove a tracepoint that does not exist).
Silence warning in out-of-memory conditions, given that the error is
returned to the caller.
This ensures that out-of-memory error-injection testing does not trigger
warnings in tracepoint.c, which were seen by syzbot.
Link: https://lkml.kernel.org/r/001a114465e241a8720567419a72@google.com
Link: https://lkml.kernel.org/r/001a1140e0de15fc910567464190@google.com
Link: http://lkml.kernel.org/r/20180315124424.32319-1-mathieu.desnoyers@efficios.com
CC: Peter Zijlstra <peterz@infradead.org>
CC: Jiri Olsa <jolsa@redhat.com>
CC: Arnaldo Carvalho de Melo <acme@kernel.org>
CC: Alexander Shishkin <alexander.shishkin@linux.intel.com>
CC: Namhyung Kim <namhyung@kernel.org>
CC: stable@vger.kernel.org
Fixes:
de7b2973903c6 ("tracepoint: Use struct pointer instead of name hash for reg/unreg tracepoints")
Reported-by: syzbot+9c0d616860575a73166a@syzkaller.appspotmail.com
Reported-by: syzbot+4e9ae7fa46233396f64d@syzkaller.appspotmail.com
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Mon, 30 Apr 2018 08:06:48 +0000 (10:06 +0200)]
ALSA: aloop: Add missing cable lock to ctl API callbacks
commit
76b3421b39bd610546931fc923edcf90c18fa395 upstream.
Some control API callbacks in aloop driver are too lazy to take the
loopback->cable_lock and it results in possible races of cable access
while it's being freed. It eventually lead to a UAF, as reported by
fuzzer recently.
This patch covers such control API callbacks and add the proper mutex
locks.
Reported-by: DaeRyong Jeong <threeearcat@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Robert Rosengren [Mon, 26 Mar 2018 05:24:49 +0000 (07:24 +0200)]
ALSA: aloop: Mark paused device as inactive
commit
306a4f3ca7f3c7dfa473ebd19d66e40e59d99734 upstream.
Show paused ALSA aloop device as inactive, i.e. the control
"PCM Slave Active" set as false. Notification sent upon state change.
This makes it possible for client capturing from aloop device to know if
data is expected. Without it the client expects data even if playback
is paused.
Signed-off-by: Robert Rosengren <robert.rosengren@axis.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Thu, 26 Apr 2018 07:17:45 +0000 (09:17 +0200)]
ALSA: seq: Fix races at MIDI encoding in snd_virmidi_output_trigger()
commit
8f22e52528cc372b218b5f100457469615c733ce upstream.
The sequencer virmidi code has an open race at its output trigger
callback: namely, virmidi keeps only one event packet for processing
while it doesn't protect for concurrent output trigger calls.
snd_virmidi_output_trigger() tries to process the previously
unfinished event before starting encoding the given MIDI stream, but
this is done without any lock. Meanwhile, if another rawmidi stream
starts the output trigger, this proceeds further, and overwrites the
event package that is being processed in another thread. This
eventually corrupts and may lead to the invalid memory access if the
event type is like SYSEX.
The fix is just to move the spinlock to cover both the pending event
and the new stream.
The bug was spotted by a new fuzzer, RaceFuzzer.
BugLink: http://lkml.kernel.org/r/20180426045223.GA15307@dragonet.kaist.ac.kr
Reported-by: DaeRyong Jeong <threeearcat@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Wed, 2 May 2018 06:48:46 +0000 (08:48 +0200)]
ALSA: pcm: Check PCM state at xfern compat ioctl
commit
f13876e2c33a657a71bcbb10f767c0951b165020 upstream.
Since snd_pcm_ioctl_xfern_compat() has no PCM state check, it may go
further and hit the sanity check pcm_sanity_check() when the ioctl is
called right after open. It may eventually spew a kernel warning, as
triggered by syzbot, depending on kconfig.
The lack of PCM state check there was just an oversight. Although
it's no real crash, the spurious kernel warning is annoying, so let's
add the proper check.
Reported-by: syzbot+1dac3a4f6bc9c1c675d4@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kristian Evensen [Thu, 1 Feb 2018 09:32:32 +0000 (10:32 +0100)]
USB: serial: option: Add support for Quectel EP06
commit
71a0483d56e784b1e11f38f10d7e22d265dbe244 upstream.
The Quectel EP06 is a Cat. 6 LTE modem, and the interface mapping is as
follows:
0: Diag
1: NMEA
2: AT
3: Modem
Interface 4 is QMI and interface 5 is ADB, so they are blacklisted.
This patch should also be considered for -stable. The QMI-patch for this
modem is already in the -stable-queue.
v1->v2:
* Updated commit prefix (thanks Johan Hovold)
* Updated commit message slightly.
Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
Acked-by: Johan Hovold <johan@kernel.org>
Cc: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Markus Pargmann [Mon, 25 Apr 2016 12:35:12 +0000 (14:35 +0200)]
gpmi-nand: Handle ECC Errors in erased pages
commit
bd2e778c9ee361c23ccb2b10591712e129d97893 upstream.
ECC is only calculated for written pages. As erased pages are not
actively written the ECC is always invalid. For this purpose the
Hardware BCH unit is able to check for erased pages and does not raise
an ECC error in this case. This behaviour can be influenced using the
BCH_MODE register which sets the number of allowed bitflips in an erased
page. Unfortunately the unit is not capable of fixing the bitflips in
memory.
To avoid complete software checks for erased pages, we can simply check
buffers with uncorrectable ECC errors because we know that any erased
page with errors is uncorrectable by the BCH unit.
This patch adds the generic nand_check_erased_ecc_chunk() to gpmi-nand
to correct erased pages. To have the valid data in the buffer before
using them, this patch moves the read_page_swap_end() call before the
ECC status checking for-loop.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
[Squashed patches by Stefan and Boris to check ECC area]
Tested-by: Stefan Christ <s.christ@phytec.de>
Acked-by: Han xu <han.xu@nxp.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vasanthakumar Thiagarajan [Fri, 27 Oct 2017 15:35:31 +0000 (18:35 +0300)]
ath10k: rebuild crypto header in rx data frames
commit
7eccb738fce57cbe53ed903ccf43f9ab257b15b3 upstream.
Rx data frames notified through HTT_T2H_MSG_TYPE_RX_IND and
HTT_T2H_MSG_TYPE_RX_FRAG_IND expect PN/TSC check to be done
on host (mac80211) rather than firmware. Rebuild cipher header
in every received data frames (that are notified through those
HTT interfaces) from the rx_hdr_status tlv available in the
rx descriptor of the first msdu. Skip setting RX_FLAG_IV_STRIPPED
flag for the packets which requires mac80211 PN/TSC check support
and set appropriate RX_FLAG for stripped crypto tail. Hw QCA988X,
QCA9887, QCA99X0, QCA9984, QCA9888 and QCA4019 currently need the
rebuilding of cipher header to perform PN/TSC check for replay
attack.
Please note that removing crypto tail for CCMP-256, GCMP and GCMP-256 ciphers
in raw mode needs to be fixed. Since Rx with these ciphers in raw
mode does not work in the current form even without this patch and
removing crypto tail for these chipers needs clean up, raw mode related
issues in CCMP-256, GCMP and GCMP-256 can be addressed in follow up
patches.
Tested-by: Manikanta Pubbisetty <mpubbise@qti.qualcomm.com>
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Sriram R <srirrama@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vasanthakumar Thiagarajan [Mon, 26 Sep 2016 18:56:24 +0000 (21:56 +0300)]
ath10k: fix rfc1042 header retrieval in QCA4019 with eth decap mode
commit
2f38c3c01de945234d23dd163e3528ccb413066d upstream.
Chipset from QCA99X0 onwards (QCA99X0, QCA9984, QCA4019 & future)
rx_hdr_status is not padded to align in 4-byte boundary. Define a
new hw_params field to handle different alignment behaviour between
different hw. This patch fixes improper retrieval of rfc1042 header
with QCA4019. This patch along with "ath10k: Properly remove padding
from the start of rx payload" will fix traffic failure in ethernet
decap mode for QCA4019.
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Sriram R <srirrama@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Spinadel [Mon, 21 Nov 2016 14:58:40 +0000 (16:58 +0200)]
mac80211: Add RX flag to indicate ICV stripped
commit
cef0acd4d7d4811d2d19cd0195031bf0dfe41249 upstream.
Add a flag that indicates that the WEP ICV was stripped from an
RX packet, allowing the device to not transfer that if it's
already checked.
Signed-off-by: David Spinadel <david.spinadel@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cc: Sriram R <srirrama@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sara Sharon [Tue, 3 May 2016 12:59:44 +0000 (15:59 +0300)]
mac80211: allow same PN for AMSDU sub-frames
commit
f631a77ba920f7153a1094d09cd8f2ebbffd0328 upstream.
Some hardware (iwlwifi an example) de-aggregate AMSDUs and copy the IV
as is to the generated MPDUs, so the same PN appears in multiple
packets without being a replay attack. Allow driver to explicitly
indicate that a frame is allowed to have the same PN as the previous
frame.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cc: Sriram R <srirrama@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sara Sharon [Wed, 24 Feb 2016 09:49:45 +0000 (11:49 +0200)]
mac80211: allow not sending MIC up from driver for HW crypto
commit
f980ebc058c2fa2a552e495db1de0b330082ab70 upstream.
When HW crypto is used, there's no need for the CCMP/GCMP MIC to
be available to mac80211, and the hardware might have removed it
already after checking. The MIC is also useless to have when the
frame is already decrypted, so allow indicating that it's not
present.
Since we are running out of bits in mac80211_rx_flags, make
the flags field a u64.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cc: Sriram R <srirrama@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tejun Heo [Wed, 14 Mar 2018 15:27:26 +0000 (08:27 -0700)]
percpu: include linux/sched.h for cond_resched()
commit
71546d100422bcc2c543dadeb9328728997cd23a upstream.
microblaze build broke due to missing declaration of the
cond_resched() invocation added recently. Let's include linux/sched.h
explicitly.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Yarygin [Thu, 31 Mar 2016 10:48:52 +0000 (13:48 +0300)]
KVM: s390: Enable all facility bits that are known good for passthrough
commit
ed8dda0bf74b4fb8e73d8880c78effabd3285fd8 upstream.
Some facility bits are in a range that is defined to be "ok for guests
without any necessary hypervisor changes". Enable those bits.
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Teng Qin [Tue, 25 Apr 2017 02:00:37 +0000 (19:00 -0700)]
bpf: map_get_next_key to return first key on NULL
commit
8fe45924387be6b5c1be59a7eb330790c61d5d10 upstream.
When iterating through a map, we need to find a key that does not exist
in the map so map_get_next_key will give us the first key of the map.
This often requires a lot of guessing in production systems.
This patch makes map_get_next_key return the first key when the key
pointer in the parameter is NULL.
Signed-off-by: Teng Qin <qinteng@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Chenbo Feng <fengc@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tan Xiaojun [Thu, 23 Feb 2017 06:04:39 +0000 (14:04 +0800)]
perf/core: Fix the perf_cpu_time_max_percent check
commit
1572e45a924f254d9570093abde46430c3172e3d upstream.
Use "proc_dointvec_minmax" instead of "proc_dointvec" to check the input
value from user-space.
If not, we can set a big value and some vars will overflow like
"sysctl_perf_event_sample_rate" which will cause a lot of unexpected
problems.
Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <acme@kernel.org>
Cc: <alexander.shishkin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1487829879-56237-1-git-send-email-tanxiaojun@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Wed, 2 May 2018 14:53:43 +0000 (07:53 -0700)]
Linux 4.4.131
Romain Izard [Tue, 23 Feb 2016 14:54:54 +0000 (15:54 +0100)]
serial: mctrl_gpio: Add missing module license
commit
82a3f87f6e80e0bf7978152021eb8938976721cb upstream.
As the mctrl_gpio driver can be built as a module, it needs to have its
license specified with MODULE_LICENSE. Otherwise, it cannot access
required symbols exported through EXPORT_SYMBOL_GPL.
Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Daniel Wagner <wagi@monom.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Uwe Kleine-König [Sun, 13 Dec 2015 10:30:02 +0000 (11:30 +0100)]
serial: mctrl_gpio: export mctrl_gpio_disable_ms and mctrl_gpio_init
commit
4f71a2e0a282611e55bacb60b564eaef5d16c27b upstream.
To be able to make use of the mctrl-gpio helper from a module these
functions must be exported. This was forgotten in the commit introducing
support interrupt handling for these functions (while it was done for
mctrl_gpio_enable_ms, *sigh*).
Fixes:
ce59e48fdbad ("serial: mctrl_gpio: implement interrupt handling")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Daniel Wagner <wagi@monom.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yazen Ghannam [Tue, 3 Apr 2018 14:02:28 +0000 (09:02 -0500)]
x86/smpboot: Don't use mwait_play_dead() on AMD systems
commit
da6fa7ef67f07108a1b0cb9fd9e7fcaabd39c051 upstream.
Recent AMD systems support using MWAIT for C1 state. However, MWAIT will
not allow deeper cstates than C1 on current systems.
play_dead() expects to use the deepest state available. The deepest state
available on AMD systems is reached through SystemIO or HALT. If MWAIT is
available, it is preferred over the other methods, so the CPU never reaches
the deepest possible state.
Don't try to use MWAIT to play_dead() on AMD systems. Instead, use CPUIDLE
to enter the deepest state advertised by firmware. If CPUIDLE is not
available then fallback to HALT.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Cc: Yazen Ghannam <Yazen.Ghannam@amd.com>
Link: https://lkml.kernel.org/r/20180403140228.58540-1-Yazen.Ghannam@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Tue, 24 Apr 2018 21:19:51 +0000 (23:19 +0200)]
x86/ipc: Fix x32 version of shmid64_ds and msqid64_ds
commit
1a512c0882bd311c5b5561840fcfbe4c25b8f319 upstream.
A bugfix broke the x32 shmid64_ds and msqid64_ds data structure layout
(as seen from user space) a few years ago: Originally, __BITS_PER_LONG
was defined as 64 on x32, so we did not have padding after the 64-bit
__kernel_time_t fields, After __BITS_PER_LONG got changed to 32,
applications would observe extra padding.
In other parts of the uapi headers we seem to have a mix of those
expecting either 32 or 64 on x32 applications, so we can't easily revert
the path that broke these two structures.
Instead, this patch decouples x32 from the other architectures and moves
it back into arch specific headers, partially reverting the even older
commit
73a2d096fdf2 ("x86: remove all now-duplicate header files").
It's not clear whether this ever made any difference, since at least
glibc carries its own (correct) copy of both of these header files,
so possibly no application has ever observed the definitions here.
Based on a suggestion from H.J. Lu, I tried out the tool from
https://github.com/hjl-tools/linux-header to find other such
bugs, which pointed out the same bug in statfs(), which also has
a separate (correct) copy in glibc.
Fixes:
f4b4aae18288 ("x86/headers/uapi: Fix __BITS_PER_LONG value for x32 builds")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "H . J . Lu" <hjl.tools@gmail.com>
Cc: Jeffrey Walton <noloader@gmail.com>
Cc: stable@vger.kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lkml.kernel.org/r/20180424212013.3967461-1-arnd@arndb.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ilya Dryomov [Tue, 24 Apr 2018 17:10:55 +0000 (19:10 +0200)]
libceph: validate con->state at the top of try_write()
commit
9c55ad1c214d9f8c4594ac2c3fa392c1c32431a7 upstream.
ceph_con_workfn() validates con->state before calling try_read() and
then try_write(). However, try_read() temporarily releases con->mutex,
notably in process_message() and ceph_con_in_msg_alloc(), opening the
window for ceph_con_close() to sneak in, close the connection and
release con->sock. When try_write() is called on the assumption that
con->state is still valid (i.e. not STANDBY or CLOSED), a NULL sock
gets passed to the networking stack:
BUG: unable to handle kernel NULL pointer dereference at
0000000000000020
IP: selinux_socket_sendmsg+0x5/0x20
Make sure con->state is valid at the top of try_write() and add an
explicit BUG_ON for this, similar to try_read().
Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/23706
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicolin Chen [Sun, 8 Apr 2018 23:57:35 +0000 (16:57 -0700)]
ASoC: fsl_esai: Fix divisor calculation failure at lower ratio
commit
c656941df9bc80f7ec65b92ca73c42f8b0b62628 upstream.
When the desired ratio is less than 256, the savesub (tolerance)
in the calculation would become 0. This will then fail the loop-
search immediately without reporting any errors.
But if the ratio is smaller enough, there is no need to calculate
the tolerance because PM divisor alone is enough to get the ratio.
So a simple fix could be just to set PM directly instead of going
into the loop-search.
Reported-by: Marek Vasut <marex@denx.de>
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Tested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geert Uytterhoeven [Tue, 10 Apr 2018 13:21:45 +0000 (15:21 +0200)]
ARM: amba: Don't read past the end of sysfs "driver_override" buffer
commit
d2ffed5185df9d8d9ccd150e4340e3b6f96a8381 upstream.
When printing the driver_override parameter when it is 4095 and 4094
bytes long, the printing code would access invalid memory because we
need count + 1 bytes for printing.
Cfr. commits
4efe874aace57dba ("PCI: Don't read past the end of sysfs
"driver_override" buffer") and
bf563b01c2895a4b ("driver core: platform:
Don't read past the end of "driver_override" buffer").
Fixes:
3cf385713460eb2b ("ARM: 8256/1: driver coamba: add device binding path 'driver_override'")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Todd Kjos <tkjos@google.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geert Uytterhoeven [Tue, 10 Apr 2018 13:21:44 +0000 (15:21 +0200)]
ARM: amba: Fix race condition with driver_override
commit
6a7228d90d42bcacfe38786756ba62762b91c20a upstream.
The driver_override implementation is susceptible to a race condition
when different threads are reading vs storing a different driver
override. Add locking to avoid this race condition.
Cfr. commits
6265539776a0810b ("driver core: platform: fix race
condition with driver_override") and
9561475db680f714 ("PCI: Fix race
condition with driver_override").
Fixes:
3cf385713460eb2b ("ARM: 8256/1: driver coamba: add device binding path 'driver_override'")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Todd Kjos <tkjos@google.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geert Uytterhoeven [Tue, 10 Apr 2018 13:21:43 +0000 (15:21 +0200)]
ARM: amba: Make driver_override output consistent with other buses
commit
5f53624662eaac89598641cee6cd54fc192572d9 upstream.
For AMBA devices with unconfigured driver override, the
"driver_override" sysfs virtual file is empty, while it contains
"(null)" for platform and PCI devices.
Make AMBA consistent with other buses by dropping the test for a NULL
pointer.
Note that contrary to popular belief, sprintf() handles NULL pointers
fine; they are printed as "(null)".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mahesh Rajashekhara [Tue, 17 Apr 2018 11:33:12 +0000 (17:03 +0530)]
scsi: sd: Defer spinning up drive while SANITIZE is in progress
commit
505aa4b6a8834a2300971c5220c380c3271ebde3 upstream.
A drive being sanitized will return NOT READY / ASC 0x4 / ASCQ
0x1b ("LOGICAL UNIT NOT READY. SANITIZE IN PROGRESS").
Prevent spinning up the drive until this condition clears.
[mkp: tweaked commit message]
Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Vyukov [Wed, 11 Apr 2018 15:22:43 +0000 (17:22 +0200)]
kobject: don't use WARN for registration failures
commit
3e14c6abbfb5c94506edda9d8e2c145d79375798 upstream.
This WARNING proved to be noisy. The function still returns an error
and callers should handle it. That's how most of kernel code works.
Downgrade the WARNING to pr_err() and leave WARNINGs for kernel bugs.
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: syzbot+209c0f67f99fec8eb14b@syzkaller.appspotmail.com
Reported-by: syzbot+7fb6d9525a4528104e05@syzkaller.appspotmail.com
Reported-by: syzbot+2e63711063e2d8f9ea27@syzkaller.appspotmail.com
Reported-by: syzbot+de73361ee4971b6e6f75@syzkaller.appspotmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joakim Tjernlund [Thu, 1 Mar 2018 13:39:41 +0000 (14:39 +0100)]
mtd: cfi: cmdset_0002: Do not allow read/write to suspend erase block.
commit
7b70eb14392a7cf505f9b358d06c33b5af73d1e7 upstream.
Currently it is possible to read and/or write to suspend EB's.
Writing /dev/mtdX or /dev/mtdblockX from several processes may
break the flash state machine.
Taken from cfi_cmdset_0001 driver.
Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joakim Tjernlund [Thu, 1 Mar 2018 13:39:40 +0000 (14:39 +0100)]
mtd: cfi: cmdset_0001: Workaround Micron Erase suspend bug.
commit
46a16a2283f9e678a4e26829175e0c37a5191860 upstream.
Some Micron chips does not work well wrt Erase suspend for
boot blocks. This avoids the issue by not allowing Erase suspend
for the boot blocks for the 28F00AP30(1GBit) chip.
Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joakim Tjernlund [Thu, 1 Mar 2018 13:39:39 +0000 (14:39 +0100)]
mtd: cfi: cmdset_0001: Do not allow read/write to suspend erase block.
commit
6510bbc88e3258631831ade49033537081950605 upstream.
Currently it is possible to read and/or write to suspend EB's.
Writing /dev/mtdX or /dev/mtdblockX from several processes may
break the flash state machine.
Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kailang Yang [Wed, 25 Apr 2018 07:31:52 +0000 (15:31 +0800)]
ALSA: hda/realtek - Add some fixes for ALC233
commit
ea04a1dbf8b1d6af759d58e705636fde48583f8f upstream.
Fill COEF to change EAPD to verb control.
Assigned codec type.
This is an additional fix over
92f974df3460 ("ALSA: hda/realtek - New
vendor ID for ALC233").
[ More notes:
according to Kailang, the chip is 10ec:0235 bonding for ALC233b,
which is equivalent with ALC255. It's only used for Lenovo.
The chip needs no alc_process_coef_fw() for headset unlike ALC255. ]
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Tue, 24 Apr 2018 05:50:50 +0000 (07:50 +0200)]
ALSA: hda: Hardening for potential Spectre v1
commit
69fa6f19b95597618ab30438a27b67ad93daa7c7 upstream.
As recently Smatch suggested, one place in HD-audio hwdep ioctl codes
may expand the array directly from the user-space value with
speculation:
sound/pci/hda/hda_local.h:467 get_wcaps() warn: potential spectre issue 'codec->wcaps'
As get_wcaps() itself is a fairly frequently called inline function,
and there is only one single call with a user-space value, we replace
only the latter one to open-code locally with array_index_nospec()
hardening in this patch.
BugLink: https://marc.info/?l=linux-kernel&m=152411496503418&w=2
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Tue, 24 Apr 2018 05:31:54 +0000 (07:31 +0200)]
ALSA: seq: oss: Hardening for potential Spectre v1
commit
8d218dd8116695ecda7164f97631c069938aa22e upstream.
As Smatch recently suggested, a few places in OSS sequencer codes may
expand the array directly from the user-space value with speculation,
namely there are a significant amount of references to either
info->ch[] or dp->synths[] array:
sound/core/seq/oss/seq_oss_event.c:315 note_on_event() warn: potential spectre issue 'info->ch' (local cap)
sound/core/seq/oss/seq_oss_event.c:362 note_off_event() warn: potential spectre issue 'info->ch' (local cap)
sound/core/seq/oss/seq_oss_synth.c:470 snd_seq_oss_synth_load_patch() warn: potential spectre issue 'dp->synths' (local cap)
sound/core/seq/oss/seq_oss_event.c:293 note_on_event() warn: potential spectre issue 'dp->synths'
sound/core/seq/oss/seq_oss_event.c:353 note_off_event() warn: potential spectre issue 'dp->synths'
sound/core/seq/oss/seq_oss_synth.c:506 snd_seq_oss_synth_sysex() warn: potential spectre issue 'dp->synths'
sound/core/seq/oss/seq_oss_synth.c:580 snd_seq_oss_synth_ioctl() warn: potential spectre issue 'dp->synths'
Although all these seem doing only the first load without further
reference, we may want to stay in a safer side, so hardening with
array_index_nospec() would still make sense.
We may put array_index_nospec() at each place, but here we take a
different approach:
- For dp->synths[], change the helpers to retrieve seq_oss_synthinfo
pointer directly instead of the array expansion at each place
- For info->ch[], harden in a normal way, as there are only a couple
of places
As a result, the existing helper, snd_seq_oss_synth_is_valid() is
replaced with snd_seq_oss_synth_info(). Also, we cover MIDI device
where a similar array expansion is done, too, although it wasn't
reported by Smatch.
BugLink: https://marc.info/?l=linux-kernel&m=152411496503418&w=2
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Tue, 24 Apr 2018 05:26:59 +0000 (07:26 +0200)]
ALSA: seq: oss: Fix unbalanced use lock for synth MIDI device
commit
f5e94b4c6ebdabe0f602d796e0430180927521a0 upstream.
When get_synthdev() is called for a MIDI device, it returns the fixed
midi_synth_dev without the use refcounting. OTOH, the caller is
supposed to unreference unconditionally after the usage, so this would
lead to unbalanced refcount.
This patch corrects the behavior and keep up the refcount balance also
for the MIDI synth device.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Henningsson [Sat, 21 Apr 2018 12:57:40 +0000 (14:57 +0200)]
ALSA: core: Report audio_tstamp in snd_pcm_sync_ptr
commit
f853dcaae2f5bbe021161e421bd1576845bae8f6 upstream.
It looks like a simple mistake that this struct member
was forgotten.
Audio_tstamp isn't used much, and on some archs (such as x86) this
ioctl is not used by default, so that might be the reason why this
has slipped for so long.
Fixes:
4eeaaeaea1ce ("ALSA: core: add hooks for audio timestamps")
Signed-off-by: David Henningsson <diwic@ubuntu.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: <stable@vger.kernel.org> # v3.8+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Tue, 24 Apr 2018 05:45:56 +0000 (07:45 +0200)]
ALSA: control: Hardening for potential Spectre v1
commit
088e861edffb84879cf0c0d1b02eda078c3a0ffe upstream.
As recently Smatch suggested, a few places in ALSA control core codes
may expand the array directly from the user-space value with
speculation:
sound/core/control.c:1003 snd_ctl_elem_lock() warn: potential spectre issue 'kctl->vd'
sound/core/control.c:1031 snd_ctl_elem_unlock() warn: potential spectre issue 'kctl->vd'
sound/core/control.c:844 snd_ctl_elem_info() warn: potential spectre issue 'kctl->vd'
sound/core/control.c:891 snd_ctl_elem_read() warn: potential spectre issue 'kctl->vd'
sound/core/control.c:939 snd_ctl_elem_write() warn: potential spectre issue 'kctl->vd'
Although all these seem doing only the first load without further
reference, we may want to stay in a safer side, so hardening with
array_index_nospec() would still make sense.
In this patch, we put array_index_nospec() to the common
snd_ctl_get_ioff*() helpers instead of each caller. These helpers are
also referred from some drivers, too, and basically all usages are to
calculate the array index from the user-space value, hence it's better
to cover there.
BugLink: https://marc.info/?l=linux-kernel&m=152411496503418&w=2
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Tue, 24 Apr 2018 06:04:41 +0000 (08:04 +0200)]
ALSA: rme9652: Hardening for potential Spectre v1
commit
f526afcd8f71945c23ce581d7864ace93de8a4f7 upstream.
As recently Smatch suggested, one place in RME9652 driver may expand
the array directly from the user-space value with speculation:
sound/pci/rme9652/rme9652.c:2074 snd_rme9652_channel_info() warn: potential spectre issue 'rme9652->channel_map' (local cap)
This patch puts array_index_nospec() for hardening against it.
BugLink: https://marc.info/?l=linux-kernel&m=152411496503418&w=2
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Tue, 24 Apr 2018 06:03:14 +0000 (08:03 +0200)]
ALSA: hdspm: Hardening for potential Spectre v1
commit
10513142a7114d251670361ad40cba2c61403406 upstream.
As recently Smatch suggested, a couple of places in HDSP MADI driver
may expand the array directly from the user-space value with
speculation:
sound/pci/rme9652/hdspm.c:5717 snd_hdspm_channel_info() warn: potential spectre issue 'hdspm->channel_map_out' (local cap)
sound/pci/rme9652/hdspm.c:5734 snd_hdspm_channel_info() warn: potential spectre issue 'hdspm->channel_map_in' (local cap)
This patch puts array_index_nospec() for hardening against them.
BugLink: https://marc.info/?l=linux-kernel&m=152411496503418&w=2
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Tue, 24 Apr 2018 06:01:48 +0000 (08:01 +0200)]
ALSA: asihpi: Hardening for potential Spectre v1
commit
f9d94b57e30fd1575b4935045b32d738668aa74b upstream.
As recently Smatch suggested, a couple of places in ASIHPI driver may
expand the array directly from the user-space value with speculation:
sound/pci/asihpi/hpimsginit.c:70 hpi_init_response() warn: potential spectre issue 'res_size' (local cap)
sound/pci/asihpi/hpioctl.c:189 asihpi_hpi_ioctl() warn: potential spectre issue 'adapters'
This patch puts array_index_nospec() for hardening against them.
BugLink: https://marc.info/?l=linux-kernel&m=152411496503418&w=2
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Tue, 24 Apr 2018 05:56:07 +0000 (07:56 +0200)]
ALSA: opl3: Hardening for potential Spectre v1
commit
7f054a5bee0987f1e2d4e59daea462421c76f2cb upstream.
As recently Smatch suggested, one place in OPL3 driver may expand the
array directly from the user-space value with speculation:
sound/drivers/opl3/opl3_synth.c:476 snd_opl3_set_voice() warn: potential spectre issue 'snd_opl3_regmap'
This patch puts array_index_nospec() for hardening against it.
BugLink: https://marc.info/?l=linux-kernel&m=152411496503418&w=2
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tetsuo Handa [Wed, 25 Apr 2018 11:12:31 +0000 (20:12 +0900)]
tty: Use __GFP_NOFAIL for tty_ldisc_get()
commit
bcdd0ca8cb8730573afebcaae4138f8f4c8eaa20 upstream.
syzbot is reporting crashes triggered by memory allocation fault injection
at tty_ldisc_get() [1]. As an attempt to handle OOM in a graceful way, we
have tried commit
5362544bebe85071 ("tty: don't panic on OOM in
tty_set_ldisc()"). But we reverted that attempt by commit
a8983d01f9b7d600
("Revert "tty: don't panic on OOM in tty_set_ldisc()"") due to reproducible
crash. We should spend resource for finding and fixing race condition bugs
rather than complicate error paths for 2 * sizeof(void *) bytes allocation
failure.
[1] https://syzkaller.appspot.com/bug?id=
489d33fa386453859ead58ff5171d43772b13aa3
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+40b7287c2dc987c48c81@syzkaller.appspotmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tony Lindgren [Sat, 7 Apr 2018 17:19:51 +0000 (10:19 -0700)]
tty: n_gsm: Fix DLCI handling for ADM mode if debug & 2 is not set
commit
b2d89ad9c9682e795ed6eeb9ed455789ad6cedf1 upstream.
At least on droid 4 with control channel in ADM mode, there is no response
to Modem Status Command (MSC). Currently gsmtty_modem_update() expects to
have data in dlci->modem_rx unless debug & 2 is set. This means that on
droid 4, things only work if debug & 2 is set.
Let's fix the issue by ignoring empty dlci->modem_rx for ADM mode. In
the AMD mode, CMD_MSC will never respond and gsm_process_modem() won't
get called to set dlci->modem_rx.
And according to ts_127010v140000p.pdf, MSC is only relevant if basic
option is chosen, so let's test for that too.
Fixes:
ea3d8465ab9b ("tty: n_gsm: Allow ADM response in addition to UA for control dlci")
Cc: linux-serial@vger.kernel.org
Cc: Alan Cox <alan@llwyncelyn.cymru>
Cc: Dan Williams <dcbw@redhat.com>
Cc: Jiri Prchal <jiri.prchal@aksignal.cz>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Michael Nazzareno Trimarchi <michael@amarulasolutions.com>
Cc: Michael Scott <michael.scott@linaro.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Russ Gorby <russ.gorby@intel.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tony Lindgren [Sat, 7 Apr 2018 17:19:50 +0000 (10:19 -0700)]
tty: n_gsm: Fix long delays with control frame timeouts in ADM mode
commit
e9ec22547986dd32c5c70da78107ce35dbff1344 upstream.
Commit
ea3d8465ab9b ("tty: n_gsm: Allow ADM response in addition to UA for
control dlci") added support for DLCI to stay in Asynchronous Disconnected
Mode (ADM). But we still get long delays waiting for commands to other
DLCI to complete:
--> 5) C: SABM(P)
Q> 0) C: UIH(F)
Q> 0) C: UIH(F)
Q> 0) C: UIH(F)
...
This happens because gsm_control_send() sets cretries timer to T2 that is
by default set to 34. This will cause resend for T2 times for the control
frame. In ADM mode, we will never get a response so the control frame, so
retries are just delaying all the commands.
Let's fix the issue by setting DLCI_MODE_ADM flag after detecting the ADM
mode for the control DLCI. Then we can use that in gsm_control_send() to
set retries to 1. This means the control frame will be sent once allowing
the other end at an opportunity to switch from ADM to ABM mode.
Note that retries will be decremented in gsm_control_retransmit() so
we don't want to set it to 0 here.
Fixes:
ea3d8465ab9b ("tty: n_gsm: Allow ADM response in addition to UA for control dlci")
Cc: linux-serial@vger.kernel.org
Cc: Alan Cox <alan@llwyncelyn.cymru>
Cc: Dan Williams <dcbw@redhat.com>
Cc: Jiri Prchal <jiri.prchal@aksignal.cz>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Michael Nazzareno Trimarchi <michael@amarulasolutions.com>
Cc: Michael Scott <michael.scott@linaro.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Russ Gorby <russ.gorby@intel.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tetsuo Handa [Thu, 5 Apr 2018 10:40:16 +0000 (19:40 +0900)]
tty: Don't call panic() at tty_ldisc_init()
commit
903f9db10f18f735e62ba447147b6c434b6af003 upstream.
syzbot is reporting kernel panic [1] triggered by memory allocation failure
at tty_ldisc_get() from tty_ldisc_init(). But since both tty_ldisc_get()
and caller of tty_ldisc_init() can cleanly handle errors, tty_ldisc_init()
does not need to call panic() when tty_ldisc_get() failed.
[1] https://syzkaller.appspot.com/bug?id=
883431818e036ae6a9981156a64b821110f39187
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gerd Hoffmann [Tue, 3 Apr 2018 09:59:04 +0000 (11:59 +0200)]
drm/virtio: fix vq wait_event condition
commit
d02d270014f70dcab0117776b81a37b6fca745ae upstream.
Wait until we have enough space in the virt queue to actually queue up
our request. Avoids the guest spinning in case we have a non-zero
amount of free entries but not enough for the request.
Cc: stable@vger.kernel.org
Reported-by: Alain Magloire <amagloire@blackberry.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180403095904.11152-1-kraxel@redhat.com
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael S. Tsirkin [Fri, 20 Apr 2018 17:24:23 +0000 (20:24 +0300)]
virtio_console: free buffers after reset
commit
a7a69ec0d8e4a58be7db88d33cbfa2912807bb2b upstream.
Console driver is out of spec. The spec says:
A driver MUST NOT decrement the available idx on a live
virtqueue (ie. there is no way to “unexpose” buffers).
and it does exactly that by trying to detach unused buffers
without doing a device reset first.
Defer detaching the buffers until device unplug.
Of course this means we might get an interrupt for
a vq without an attached port now. Handle that by
discarding the consumed buffer.
Reported-by: Tiwei Bie <tiwei.bie@intel.com>
Fixes:
b3258ff1d6 ("virtio: Decrement avail idx on buffer detach")
Cc: stable@vger.kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael S. Tsirkin [Fri, 20 Apr 2018 17:22:40 +0000 (20:22 +0300)]
virtio: add ability to iterate over vqs
commit
24a7e4d20783c0514850f24a5c41ede46ab058f0 upstream.
For cleanup it's helpful to be able to simply scan all vqs and discard
all data. Add an iterator to do that.
Cc: stable@vger.kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Tue, 24 Apr 2018 09:11:48 +0000 (11:11 +0200)]
ALSA: usb-audio: Skip broken EU on Dell dock USB-audio
commit
1d8d6428d1da642ddd75b0be2d1bb1123ff8e017 upstream.
The Dell Dock USB-audio device with 0bda:4014 is behaving notoriously
bad, and we have already applied some workaround to avoid the firmware
hiccup. Yet we still need to skip one thing, the Extension Unit at ID
4, which doesn't react correctly to the mixer ctl access.
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=
1090658
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ravi Chandra Sadineni [Fri, 20 Apr 2018 18:08:21 +0000 (11:08 -0700)]
USB: Increment wakeup count on remote wakeup.
commit
83a62c51ba7b3c0bf45150c4eac7aefc6c785e94 upstream.
On chromebooks we depend on wakeup count to identify the wakeup source.
But currently USB devices do not increment the wakeup count when they
trigger the remote wake. This patch addresses the same.
Resume condition is reported differently on USB 2.0 and USB 3.0 devices.
On USB 2.0 devices, a wake capable device, if wake enabled, drives
resume signal to indicate a remote wake (USB 2.0 spec section 7.1.7.7).
The upstream facing port then sets C_PORT_SUSPEND bit and reports a
port change event (USB 2.0 spec section 11.24.2.7.2.3). Thus if a port
has resumed before driving the resume signal from the host and
C_PORT_SUSPEND is set, then the device attached to the given port might
be the reason for the last system wakeup. Increment the wakeup count for
the same.
On USB 3.0 devices, a function may signal that it wants to exit from device
suspend by sending a Function Wake Device Notification to the host (USB3.0
spec section 8.5.6.4) Thus on receiving the Function Wake, increment the
wakeup count.
Signed-off-by: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kamil Lulko [Thu, 19 Apr 2018 23:54:02 +0000 (16:54 -0700)]
usb: core: Add quirk for HP v222w 16GB Mini
commit
3180dabe08e3653bf0a838553905d88f3773f29c upstream.
Add DELAY_INIT quirk to fix the following problem with HP
v222w 16GB Mini:
usb 1-3: unable to read config index 0 descriptor/start: -110
usb 1-3: can't read configurations, error -110
usb 1-3: can't set config #1, error -110
Signed-off-by: Kamil Lulko <kamilx.lulko@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kyle Roeschley [Mon, 9 Apr 2018 15:23:55 +0000 (10:23 -0500)]
USB: serial: cp210x: add ID for NI USB serial console
commit
1e23aace21515a8f7615a1de016c0ea8d4e0cc6e upstream.
Added the USB VID and PID for the USB serial console on some National
Instruments devices.
Signed-off-by: Kyle Roeschley <kyle.roeschley@ni.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vasyl Vavrychuk [Wed, 11 Apr 2018 14:05:13 +0000 (17:05 +0300)]
USB: serial: ftdi_sio: use jtag quirk for Arrow USB Blaster
commit
470b5d6f0cf4674be2d1ec94e54283a1770b6a1a upstream.
Arrow USB Blaster integrated on MAX1000 board uses the same vendor ID
(0x0403) and product ID (0x6010) as the "original" FTDI device.
This patch avoids picking up by ftdi_sio of the first interface of this
USB device. After that this device can be used by Arrow user-space JTAG
driver.
Signed-off-by: Vasyl Vavrychuk <vvavrychuk@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Collin May [Sat, 7 Apr 2018 21:32:48 +0000 (14:32 -0700)]
USB: serial: simple: add libtransistor console
commit
fe710508b6ba9d28730f3021fed70e7043433b2e upstream.
Add simple driver for libtransistor USB console.
This device is implemented in software:
https://github.com/reswitched/libtransistor/blob/development/lib/usb_serial.c
Signed-off-by: Collin May <collin@collinswebsite.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shuah Khan [Mon, 2 Apr 2018 20:52:32 +0000 (14:52 -0600)]
usbip: vhci_hcd: Fix usb device and sockfd leaks
commit
9020a7efe537856eb3e826ebebdf38a5d07a7857 upstream.
vhci_hcd fails to do reset to put usb device and sockfd in the
module remove/stop paths. Fix the leak.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shuah Khan [Thu, 5 Apr 2018 22:29:04 +0000 (16:29 -0600)]
usbip: usbip_host: fix to hold parent lock for device_attach() calls
commit
4bfb141bc01312a817d36627cc47c93f801c216d upstream.
usbip_host calls device_attach() without holding dev->parent lock.
Fix it.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lukas Czerner [Tue, 24 Apr 2018 15:31:44 +0000 (11:31 -0400)]
ext4: fix bitmap position validation
commit
22be37acce25d66ecf6403fc8f44df9c5ded2372 upstream.
Currently in ext4_valid_block_bitmap() we expect the bitmap to be
positioned anywhere between 0 and s_blocksize clusters, but that's
wrong because the bitmap can be placed anywhere in the block group. This
causes false positives when validating bitmaps on perfectly valid file
system layouts. Fix it by checking whether the bitmap is within the group
boundary.
The problem can be reproduced using the following
mkfs -t ext3 -E stride=256 /dev/vdb1
mount /dev/vdb1 /mnt/test
cd /mnt/test
wget https://cdn.kernel.org/pub/linux/kernel/v4.x/linux-4.16.3.tar.xz
tar xf linux-4.16.3.tar.xz
This will result in the warnings in the logs
EXT4-fs error (device vdb1): ext4_validate_block_bitmap:399: comm tar: bg 84: block
2774529: invalid block bitmap
[ Changed slightly for clarity and to not drop a overflow test -- TYT ]
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reported-by: Ilya Dryomov <idryomov@gmail.com>
Fixes:
7dac4a1726a9 ("ext4: add validity checks for bitmap block numbers")
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Theodore Ts'o [Tue, 27 Mar 2018 03:54:10 +0000 (23:54 -0400)]
ext4: add validity checks for bitmap block numbers
commit
7dac4a1726a9c64a517d595c40e95e2d0d135f6f upstream.
An privileged attacker can cause a crash by mounting a crafted ext4
image which triggers a out-of-bounds read in the function
ext4_valid_block_bitmap() in fs/ext4/balloc.c.
This issue has been assigned CVE-2018-1093.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199181
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1560782
Reported-by: Wen Xu <wen.xu@gatech.edu>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Theodore Ts'o [Wed, 18 Apr 2018 15:49:31 +0000 (11:49 -0400)]
ext4: set h_journal if there is a failure starting a reserved handle
commit
b2569260d55228b617bd82aba6d0db2faeeb4116 upstream.
If ext4 tries to start a reserved handle via
jbd2_journal_start_reserved(), and the journal has been aborted, this
can result in a NULL pointer dereference. This is because the fields
h_journal and h_transaction in the handle structure share the same
memory, via a union, so jbd2_journal_start_reserved() will clear
h_journal before calling start_this_handle(). If this function fails
due to an aborted handle, h_journal will still be NULL, and the call
to jbd2_journal_free_reserved() will pass a NULL journal to
sub_reserve_credits().
This can be reproduced by running "kvm-xfstests -c dioread_nolock
generic/475".
Cc: stable@kernel.org # 3.11
Fixes:
8f7d89f36829b ("jbd2: transaction reservation support")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Thu, 12 Apr 2018 15:48:09 +0000 (11:48 -0400)]
ext4: prevent right-shifting extents beyond EXT_MAX_BLOCKS
commit
349fa7d6e1935f49bf4161c4900711b2989180a9 upstream.
During the "insert range" fallocate operation, extents starting at the
range offset are shifted "right" (to a higher file offset) by the range
length. But, as shown by syzbot, it's not validated that this doesn't
cause extents to be shifted beyond EXT_MAX_BLOCKS. In that case
->ee_block can wrap around, corrupting the extent tree.
Fix it by returning an error if the space between the end of the last
extent and EXT4_MAX_BLOCKS is smaller than the range being inserted.
This bug can be reproduced by running the following commands when the
current directory is on an ext4 filesystem with a 4k block size:
fallocate -l 8192 file
fallocate --keep-size -o 0xfffffffe000 -l 4096 -n file
fallocate --insert-range -l 8192 file
Then after unmounting the filesystem, e2fsck reports corruption.
Reported-by: syzbot+06c885be0edcdaeab40c@syzkaller.appspotmail.com
Fixes:
331573febb6a ("ext4: Add support FALLOC_FL_INSERT_RANGE for fallocate")
Cc: stable@vger.kernel.org # v4.2+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sun, 29 Apr 2018 05:50:07 +0000 (07:50 +0200)]
Linux 4.4.130
Heiko Carstens [Mon, 16 Apr 2018 10:22:24 +0000 (12:22 +0200)]
s390/uprobes: implement arch_uretprobe_is_alive()
commit
783c3b53b9506db3e05daacfe34e0287eebb09d8 upstream.
Implement s390 specific arch_uretprobe_is_alive() to avoid SIGSEGVs
observed with uretprobes in combination with setjmp/longjmp.
See commit
2dea1d9c38e4 ("powerpc/uprobes: Implement
arch_uretprobe_is_alive()") for more details.
With this implemented all test cases referenced in the above commit
pass.
Reported-by: Ziqian SUN <zsun@redhat.com>
Cc: <stable@vger.kernel.org> # v4.3+
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sebastian Ott [Wed, 11 Apr 2018 09:21:17 +0000 (11:21 +0200)]
s390/cio: update chpid descriptor after resource accessibility event
commit
af2e460ade0b0180d0f3812ca4f4f59cc9597f3e upstream.
Channel path descriptors have been seen as something stable (as
long as the chpid is configured). Recent tests have shown that the
descriptor can also be altered when the link state of a channel path
changes. Thus it is necessary to update the descriptor during
handling of resource accessibility events.
Cc: <stable@vger.kernel.org>
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Wed, 18 Apr 2018 09:51:31 +0000 (12:51 +0300)]
cdrom: information leak in cdrom_ioctl_media_changed()
commit
9de4ee40547fd315d4a0ed1dd15a2fa3559ad707 upstream.
This cast is wrong. "cdi->capacity" is an int and "arg" is an unsigned
long. The way the check is written now, if one of the high 32 bits is
set then we could read outside the info->slots[] array.
This bug is pretty old and it predates git.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martin K. Petersen [Thu, 19 Apr 2018 02:54:59 +0000 (22:54 -0400)]
scsi: mptsas: Disable WRITE SAME
commit
94e5395d2403c8bc2504a7cbe4c4caaacb7b8b84 upstream.
First generation MPT Fusion controllers can not translate WRITE SAME
when the attached device is a SATA drive. Disable WRITE SAME support.
Reported-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Mon, 23 Apr 2018 01:29:23 +0000 (18:29 -0700)]
ipv6: add RTA_TABLE and RTA_PREFSRC to rtm_ipv6_policy
[ Upstream commit
aa8f8778493c85fff480cdf8b349b1e1dcb5f243 ]
KMSAN reported use of uninit-value that I tracked to lack
of proper size check on RTA_TABLE attribute.
I also believe RTA_PREFSRC lacks a similar check.
Fixes:
86872cb57925 ("[IPv6] route: FIB6 configuration using struct fib6_config")
Fixes:
c3968a857a6b ("ipv6: RTA_PREFSRC support for ipv6 route source address selection")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Mon, 16 Apr 2018 00:52:04 +0000 (17:52 -0700)]
net: af_packet: fix race in PACKET_{R|T}X_RING
[ Upstream commit
5171b37d959641bbc619781caf62e61f7b940871 ]
In order to remove the race caught by syzbot [1], we need
to lock the socket before using po->tp_version as this could
change under us otherwise.
This means lock_sock() and release_sock() must be done by
packet_set_ring() callers.
[1] :
BUG: KMSAN: uninit-value in packet_set_ring+0x1254/0x3870 net/packet/af_packet.c:4249
CPU: 0 PID: 20195 Comm: syzkaller707632 Not tainted 4.16.0+ #83
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:53
kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
__msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676
packet_set_ring+0x1254/0x3870 net/packet/af_packet.c:4249
packet_setsockopt+0x12c6/0x5a90 net/packet/af_packet.c:3662
SYSC_setsockopt+0x4b8/0x570 net/socket.c:1849
SyS_setsockopt+0x76/0xa0 net/socket.c:1828
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x449099
RSP: 002b:
00007f42b5307ce8 EFLAGS:
00000246 ORIG_RAX:
0000000000000036
RAX:
ffffffffffffffda RBX:
000000000070003c RCX:
0000000000449099
RDX:
0000000000000005 RSI:
0000000000000107 RDI:
0000000000000003
RBP:
0000000000700038 R08:
000000000000001c R09:
0000000000000000
R10:
00000000200000c0 R11:
0000000000000246 R12:
0000000000000000
R13:
000000000080eecf R14:
00007f42b53089c0 R15:
0000000000000001
Local variable description: ----req_u@packet_setsockopt
Variable was created at:
packet_setsockopt+0x13f/0x5a90 net/packet/af_packet.c:3612
SYSC_setsockopt+0x4b8/0x570 net/socket.c:1849
Fixes:
f6fb8f100b80 ("af-packet: TPACKET_V3 flexible buffer implementation.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Wed, 11 Apr 2018 21:36:28 +0000 (14:36 -0700)]
tcp: md5: reject TCP_MD5SIG or TCP_MD5SIG_EXT on established sockets
[ Upstream commit
7212303268918b9a203aebeacfdbd83b5e87b20d ]
syzbot/KMSAN reported an uninit-value in tcp_parse_options() [1]
I believe this was caused by a TCP_MD5SIG being set on live
flow.
This is highly unexpected, since TCP option space is limited.
For instance, presence of TCP MD5 option automatically disables
TCP TimeStamp option at SYN/SYNACK time, which we can not do
once flow has been established.
Really, adding/deleting an MD5 key only makes sense on sockets
in CLOSE or LISTEN state.
[1]
BUG: KMSAN: uninit-value in tcp_parse_options+0xd74/0x1a30 net/ipv4/tcp_input.c:3720
CPU: 1 PID: 6177 Comm: syzkaller192004 Not tainted 4.16.0+ #83
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:53
kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
__msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676
tcp_parse_options+0xd74/0x1a30 net/ipv4/tcp_input.c:3720
tcp_fast_parse_options net/ipv4/tcp_input.c:3858 [inline]
tcp_validate_incoming+0x4f1/0x2790 net/ipv4/tcp_input.c:5184
tcp_rcv_established+0xf60/0x2bb0 net/ipv4/tcp_input.c:5453
tcp_v4_do_rcv+0x6cd/0xd90 net/ipv4/tcp_ipv4.c:1469
sk_backlog_rcv include/net/sock.h:908 [inline]
__release_sock+0x2d6/0x680 net/core/sock.c:2271
release_sock+0x97/0x2a0 net/core/sock.c:2786
tcp_sendmsg+0xd6/0x100 net/ipv4/tcp.c:1464
inet_sendmsg+0x48d/0x740 net/ipv4/af_inet.c:764
sock_sendmsg_nosec net/socket.c:630 [inline]
sock_sendmsg net/socket.c:640 [inline]
SYSC_sendto+0x6c3/0x7e0 net/socket.c:1747
SyS_sendto+0x8a/0xb0 net/socket.c:1715
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x448fe9
RSP: 002b:
00007fd472c64d38 EFLAGS:
00000216 ORIG_RAX:
000000000000002c
RAX:
ffffffffffffffda RBX:
00000000006e5a30 RCX:
0000000000448fe9
RDX:
000000000000029f RSI:
0000000020a88f88 RDI:
0000000000000004
RBP:
00000000006e5a34 R08:
0000000020e68000 R09:
0000000000000010
R10:
00000000200007fd R11:
0000000000000216 R12:
0000000000000000
R13:
00007fff074899ef R14:
00007fd472c659c0 R15:
0000000000000009
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline]
kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188
kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314
kmsan_slab_alloc+0x11/0x20 mm/kmsan/kmsan.c:321
slab_post_alloc_hook mm/slab.h:445 [inline]
slab_alloc_node mm/slub.c:2737 [inline]
__kmalloc_node_track_caller+0xaed/0x11c0 mm/slub.c:4369
__kmalloc_reserve net/core/skbuff.c:138 [inline]
__alloc_skb+0x2cf/0x9f0 net/core/skbuff.c:206
alloc_skb include/linux/skbuff.h:984 [inline]
tcp_send_ack+0x18c/0x910 net/ipv4/tcp_output.c:3624
__tcp_ack_snd_check net/ipv4/tcp_input.c:5040 [inline]
tcp_ack_snd_check net/ipv4/tcp_input.c:5053 [inline]
tcp_rcv_established+0x2103/0x2bb0 net/ipv4/tcp_input.c:5469
tcp_v4_do_rcv+0x6cd/0xd90 net/ipv4/tcp_ipv4.c:1469
sk_backlog_rcv include/net/sock.h:908 [inline]
__release_sock+0x2d6/0x680 net/core/sock.c:2271
release_sock+0x97/0x2a0 net/core/sock.c:2786
tcp_sendmsg+0xd6/0x100 net/ipv4/tcp.c:1464
inet_sendmsg+0x48d/0x740 net/ipv4/af_inet.c:764
sock_sendmsg_nosec net/socket.c:630 [inline]
sock_sendmsg net/socket.c:640 [inline]
SYSC_sendto+0x6c3/0x7e0 net/socket.c:1747
SyS_sendto+0x8a/0xb0 net/socket.c:1715
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
Fixes:
cfb6eeb4c860 ("[TCP]: MD5 Signature Option (RFC2385) support.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wolfgang Bumiller [Thu, 12 Apr 2018 08:46:55 +0000 (10:46 +0200)]
net: fix deadlock while clearing neighbor proxy table
[ Upstream commit
53b76cdf7e8fecec1d09e38aad2f8579882591a8 ]
When coming from ndisc_netdev_event() in net/ipv6/ndisc.c,
neigh_ifdown() is called with &nd_tbl, locking this while
clearing the proxy neighbor entries when eg. deleting an
interface. Calling the table's pndisc_destructor() with the
lock still held, however, can cause a deadlock: When a
multicast listener is available an IGMP packet of type
ICMPV6_MGM_REDUCTION may be sent out. When reaching
ip6_finish_output2(), if no neighbor entry for the target
address is found, __neigh_create() is called with &nd_tbl,
which it'll want to lock.
Move the elements into their own list, then unlock the table
and perform the destruction.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199289
Fixes:
6fd6ce2056de ("ipv6: Do not depend on rt->n in ip6_finish_output2().")
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Mon, 16 Apr 2018 15:29:42 +0000 (08:29 -0700)]
tipc: add policy for TIPC_NLA_NET_ADDR
[ Upstream commit
ec518f21cb1a1b1f8a516499ea05c60299e04963 ]
Before syzbot/KMSAN bites, add the missing policy for TIPC_NLA_NET_ADDR
Fixes:
27c21416727a ("tipc: add net set to new netlink api")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jon Maloy <jon.maloy@ericsson.com>
Cc: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cong Wang [Fri, 20 Apr 2018 04:54:34 +0000 (21:54 -0700)]
llc: fix NULL pointer deref for SOCK_ZAPPED
[ Upstream commit
3a04ce7130a7e5dad4e78d45d50313747f8c830f ]
For SOCK_ZAPPED socket, we don't need to care about llc->sap,
so we should just skip these refcount functions in this case.
Fixes:
f7e43672683b ("llc: hold llc_sap before release_sock()")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cong Wang [Wed, 18 Apr 2018 18:51:56 +0000 (11:51 -0700)]
llc: hold llc_sap before release_sock()
[ Upstream commit
f7e43672683b097bb074a8fe7af9bc600a23f231 ]
syzbot reported we still access llc->sap in llc_backlog_rcv()
after it is freed in llc_sap_remove_socket():
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1b9/0x294 lib/dump_stack.c:113
print_address_description+0x6c/0x20b mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412
__asan_report_load1_noabort+0x14/0x20 mm/kasan/report.c:430
llc_conn_ac_send_sabme_cmd_p_set_x+0x3a8/0x460 net/llc/llc_c_ac.c:785
llc_exec_conn_trans_actions net/llc/llc_conn.c:475 [inline]
llc_conn_service net/llc/llc_conn.c:400 [inline]
llc_conn_state_process+0x4e1/0x13a0 net/llc/llc_conn.c:75
llc_backlog_rcv+0x195/0x1e0 net/llc/llc_conn.c:891
sk_backlog_rcv include/net/sock.h:909 [inline]
__release_sock+0x12f/0x3a0 net/core/sock.c:2335
release_sock+0xa4/0x2b0 net/core/sock.c:2850
llc_ui_release+0xc8/0x220 net/llc/af_llc.c:204
llc->sap is refcount'ed and llc_sap_remove_socket() is paired
with llc_sap_add_socket(). This can be amended by holding its refcount
before llc_sap_remove_socket() and releasing it after release_sock().
Reported-by: <syzbot+6e181fc95081c2cf9051@syzkaller.appspotmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xin Long [Thu, 12 Apr 2018 06:24:31 +0000 (14:24 +0800)]
sctp: do not check port in sctp_inet6_cmp_addr
[ Upstream commit
1071ec9d453a38023579714b64a951a2fb982071 ]
pf->cmp_addr() is called before binding a v6 address to the sock. It
should not check ports, like in sctp_inet_cmp_addr.
But sctp_inet6_cmp_addr checks the addr by invoking af(6)->cmp_addr,
sctp_v6_cmp_addr where it also compares the ports.
This would cause that setsockopt(SCTP_SOCKOPT_BINDX_ADD) could bind
multiple duplicated IPv6 addresses after Commit
40b4f0fd74e4 ("sctp:
lack the check for ports in sctp_v6_cmp_addr").
This patch is to remove af->cmp_addr called in sctp_inet6_cmp_addr,
but do the proper check for both v6 addrs and v4mapped addrs.
v1->v2:
- define __sctp_v6_cmp_addr to do the common address comparison
used for both pf and af v6 cmp_addr.
Fixes:
40b4f0fd74e4 ("sctp: lack the check for ports in sctp_v6_cmp_addr")
Reported-by: Jianwen Ji <jiji@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Toshiaki Makita [Tue, 17 Apr 2018 09:46:14 +0000 (18:46 +0900)]
vlan: Fix reading memory beyond skb->tail in skb_vlan_tagged_multi
[ Upstream commit
7ce2367254e84753bceb07327aaf5c953cfce117 ]
Syzkaller spotted an old bug which leads to reading skb beyond tail by 4
bytes on vlan tagged packets.
This is caused because skb_vlan_tagged_multi() did not check
skb_headlen.
BUG: KMSAN: uninit-value in eth_type_vlan include/linux/if_vlan.h:283 [inline]
BUG: KMSAN: uninit-value in skb_vlan_tagged_multi include/linux/if_vlan.h:656 [inline]
BUG: KMSAN: uninit-value in vlan_features_check include/linux/if_vlan.h:672 [inline]
BUG: KMSAN: uninit-value in dflt_features_check net/core/dev.c:2949 [inline]
BUG: KMSAN: uninit-value in netif_skb_features+0xd1b/0xdc0 net/core/dev.c:3009
CPU: 1 PID: 3582 Comm: syzkaller435149 Not tainted 4.16.0+ #82
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:53
kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
__msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676
eth_type_vlan include/linux/if_vlan.h:283 [inline]
skb_vlan_tagged_multi include/linux/if_vlan.h:656 [inline]
vlan_features_check include/linux/if_vlan.h:672 [inline]
dflt_features_check net/core/dev.c:2949 [inline]
netif_skb_features+0xd1b/0xdc0 net/core/dev.c:3009
validate_xmit_skb+0x89/0x1320 net/core/dev.c:3084
__dev_queue_xmit+0x1cb2/0x2b60 net/core/dev.c:3549
dev_queue_xmit+0x4b/0x60 net/core/dev.c:3590
packet_snd net/packet/af_packet.c:2944 [inline]
packet_sendmsg+0x7c57/0x8a10 net/packet/af_packet.c:2969
sock_sendmsg_nosec net/socket.c:630 [inline]
sock_sendmsg net/socket.c:640 [inline]
sock_write_iter+0x3b9/0x470 net/socket.c:909
do_iter_readv_writev+0x7bb/0x970 include/linux/fs.h:1776
do_iter_write+0x30d/0xd40 fs/read_write.c:932
vfs_writev fs/read_write.c:977 [inline]
do_writev+0x3c9/0x830 fs/read_write.c:1012
SYSC_writev+0x9b/0xb0 fs/read_write.c:1085
SyS_writev+0x56/0x80 fs/read_write.c:1082
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x43ffa9
RSP: 002b:
00007fff2cff3948 EFLAGS:
00000217 ORIG_RAX:
0000000000000014
RAX:
ffffffffffffffda RBX:
00000000004002c8 RCX:
000000000043ffa9
RDX:
0000000000000001 RSI:
0000000020000080 RDI:
0000000000000003
RBP:
00000000006cb018 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000217 R12:
00000000004018d0
R13:
0000000000401960 R14:
0000000000000000 R15:
0000000000000000
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline]
kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188
kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314
kmsan_slab_alloc+0x11/0x20 mm/kmsan/kmsan.c:321
slab_post_alloc_hook mm/slab.h:445 [inline]
slab_alloc_node mm/slub.c:2737 [inline]
__kmalloc_node_track_caller+0xaed/0x11c0 mm/slub.c:4369
__kmalloc_reserve net/core/skbuff.c:138 [inline]
__alloc_skb+0x2cf/0x9f0 net/core/skbuff.c:206
alloc_skb include/linux/skbuff.h:984 [inline]
alloc_skb_with_frags+0x1d4/0xb20 net/core/skbuff.c:5234
sock_alloc_send_pskb+0xb56/0x1190 net/core/sock.c:2085
packet_alloc_skb net/packet/af_packet.c:2803 [inline]
packet_snd net/packet/af_packet.c:2894 [inline]
packet_sendmsg+0x6444/0x8a10 net/packet/af_packet.c:2969
sock_sendmsg_nosec net/socket.c:630 [inline]
sock_sendmsg net/socket.c:640 [inline]
sock_write_iter+0x3b9/0x470 net/socket.c:909
do_iter_readv_writev+0x7bb/0x970 include/linux/fs.h:1776
do_iter_write+0x30d/0xd40 fs/read_write.c:932
vfs_writev fs/read_write.c:977 [inline]
do_writev+0x3c9/0x830 fs/read_write.c:1012
SYSC_writev+0x9b/0xb0 fs/read_write.c:1085
SyS_writev+0x56/0x80 fs/read_write.c:1082
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
Fixes:
58e998c6d239 ("offloading: Force software GSO for multiple vlan tags.")
Reported-and-tested-by: syzbot+0bbe42c764feafa82c5a@syzkaller.appspotmail.com
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guillaume Nault [Mon, 23 Apr 2018 14:38:27 +0000 (16:38 +0200)]
pppoe: check sockaddr length in pppoe_connect()
[ Upstream commit
a49e2f5d5fb141884452ddb428f551b123d436b5 ]
We must validate sockaddr_len, otherwise userspace can pass fewer data
than we expect and we end up accessing invalid data.
Fixes:
224cf5ad14c0 ("ppp: Move the PPP drivers")
Reported-by: syzbot+4f03bdf92fdf9ef5ddab@syzkaller.appspotmail.com
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Willem de Bruijn [Mon, 23 Apr 2018 21:37:03 +0000 (17:37 -0400)]
packet: fix bitfield update race
[ Upstream commit
a6361f0ca4b25460f2cdf3235ebe8115f622901e ]
Updates to the bitfields in struct packet_sock are not atomic.
Serialize these read-modify-write cycles.
Move po->running into a separate variable. Its writes are protected by
po->bind_lock (except for one startup case at packet_create). Also
replace a textual precondition warning with lockdep annotation.
All others are set only in packet_setsockopt. Serialize these
updates by holding the socket lock. Analogous to other field updates,
also hold the lock when testing whether a ring is active (pg_vec).
Fixes:
8dc419447415 ("[PACKET]: Add optional checksum computation for recvmsg")
Reported-by: DaeRyong Jeong <threeearcat@gmail.com>
Reported-by: Byoungyoung Lee <byoungyoung@purdue.edu>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xin Long [Tue, 24 Apr 2018 06:33:37 +0000 (14:33 +0800)]
team: fix netconsole setup over team
[ Upstream commit
9cf2f437ca5b39828984064fad213e68fc17ef11 ]
The same fix in Commit
dbe173079ab5 ("bridge: fix netconsole
setup over bridge") is also needed for team driver.
While at it, remove the unnecessary parameter *team from
team_port_enable_netpoll().
v1->v2:
- fix it in a better way, as does bridge.
Fixes:
0fb52a27a04a ("team: cleanup netpoll clode")
Reported-by: João Avelino Bellomo Filho <jbellomo@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Abeni [Fri, 13 Apr 2018 11:59:25 +0000 (13:59 +0200)]
team: avoid adding twice the same option to the event list
[ Upstream commit
4fb0534fb7bbc2346ba7d3a072b538007f4135a5 ]
When parsing the options provided by the user space,
team_nl_cmd_options_set() insert them in a temporary list to send
multiple events with a single message.
While each option's attribute is correctly validated, the code does
not check for duplicate entries before inserting into the event
list.
Exploiting the above, the syzbot was able to trigger the following
splat:
kernel BUG at lib/list_debug.c:31!
invalid opcode: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in:
CPU: 0 PID: 4466 Comm: syzkaller556835 Not tainted 4.16.0+ #17
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:__list_add_valid+0xaa/0xb0 lib/list_debug.c:29
RSP: 0018:
ffff8801b04bf248 EFLAGS:
00010286
RAX:
0000000000000058 RBX:
ffff8801c8fc7a90 RCX:
0000000000000000
RDX:
0000000000000058 RSI:
ffffffff815fbf41 RDI:
ffffed0036097e3f
RBP:
ffff8801b04bf260 R08:
ffff8801b0b2a700 R09:
ffffed003b604f90
R10:
ffffed003b604f90 R11:
ffff8801db027c87 R12:
ffff8801c8fc7a90
R13:
ffff8801c8fc7a90 R14:
dffffc0000000000 R15:
0000000000000000
FS:
0000000000b98880(0000) GS:
ffff8801db000000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
000000000043fc30 CR3:
00000001afe8e000 CR4:
00000000001406f0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
__list_add include/linux/list.h:60 [inline]
list_add include/linux/list.h:79 [inline]
team_nl_cmd_options_set+0x9ff/0x12b0 drivers/net/team/team.c:2571
genl_family_rcv_msg+0x889/0x1120 net/netlink/genetlink.c:599
genl_rcv_msg+0xc6/0x170 net/netlink/genetlink.c:624
netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2448
genl_rcv+0x28/0x40 net/netlink/genetlink.c:635
netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
netlink_unicast+0x58b/0x740 net/netlink/af_netlink.c:1336
netlink_sendmsg+0x9f0/0xfa0 net/netlink/af_netlink.c:1901
sock_sendmsg_nosec net/socket.c:629 [inline]
sock_sendmsg+0xd5/0x120 net/socket.c:639
___sys_sendmsg+0x805/0x940 net/socket.c:2117
__sys_sendmsg+0x115/0x270 net/socket.c:2155
SYSC_sendmsg net/socket.c:2164 [inline]
SyS_sendmsg+0x29/0x30 net/socket.c:2162
do_syscall_64+0x29e/0x9d0 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x4458b9
RSP: 002b:
00007ffd1d4a7278 EFLAGS:
00000213 ORIG_RAX:
000000000000002e
RAX:
ffffffffffffffda RBX:
000000000000001b RCX:
00000000004458b9
RDX:
0000000000000010 RSI:
0000000020000d00 RDI:
0000000000000004
RBP:
00000000004a74ed R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000213 R12:
00007ffd1d4a7348
R13:
0000000000402a60 R14:
0000000000000000 R15:
0000000000000000
Code: 75 e8 eb a9 48 89 f7 48 89 75 e8 e8 d1 85 7b fe 48 8b 75 e8 eb bb 48
89 f2 48 89 d9 4c 89 e6 48 c7 c7 a0 84 d8 87 e8 ea 67 28 fe <0f> 0b 0f 1f
40 00 48 b8 00 00 00 00 00 fc ff df 55 48 89 e5 41
RIP: __list_add_valid+0xaa/0xb0 lib/list_debug.c:29 RSP:
ffff8801b04bf248
This changeset addresses the avoiding list_add() if the current
option is already present in the event list.
Reported-and-tested-by: syzbot+4d4af685432dc0e56c91@syzkaller.appspotmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Fixes:
2fcdb2c9e659 ("team: allow to send multiple set events in one message")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jann Horn [Fri, 20 Apr 2018 13:57:30 +0000 (15:57 +0200)]
tcp: don't read out-of-bounds opsize
[ Upstream commit
7e5a206ab686f098367b61aca989f5cdfa8114a3 ]
The old code reads the "opsize" variable from out-of-bounds memory (first
byte behind the segment) if a broken TCP segment ends directly after an
opcode that is neither EOL nor NOP.
The result of the read isn't used for anything, so the worst thing that
could theoretically happen is a pagefault; and since the physmap is usually
mostly contiguous, even that seems pretty unlikely.
The following C reproducer triggers the uninitialized read - however, you
can't actually see anything happen unless you put something like a
pr_warn() in tcp_parse_md5sig_option() to print the opsize.
====================================
#define _GNU_SOURCE
#include <arpa/inet.h>
#include <stdlib.h>
#include <errno.h>
#include <stdarg.h>
#include <net/if.h>
#include <linux/if.h>
#include <linux/ip.h>
#include <linux/tcp.h>
#include <linux/in.h>
#include <linux/if_tun.h>
#include <err.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <string.h>
#include <stdio.h>
#include <unistd.h>
#include <sys/ioctl.h>
#include <assert.h>
void systemf(const char *command, ...) {
char *full_command;
va_list ap;
va_start(ap, command);
if (vasprintf(&full_command, command, ap) == -1)
err(1, "vasprintf");
va_end(ap);
printf("systemf: <<<%s>>>\n", full_command);
system(full_command);
}
char *devname;
int tun_alloc(char *name) {
int fd = open("/dev/net/tun", O_RDWR);
if (fd == -1)
err(1, "open tun dev");
static struct ifreq req = { .ifr_flags = IFF_TUN|IFF_NO_PI };
strcpy(req.ifr_name, name);
if (ioctl(fd, TUNSETIFF, &req))
err(1, "TUNSETIFF");
devname = req.ifr_name;
printf("device name: %s\n", devname);
return fd;
}
#define IPADDR(a,b,c,d) (((a)<<0)+((b)<<8)+((c)<<16)+((d)<<24))
void sum_accumulate(unsigned int *sum, void *data, int len) {
assert((len&2)==0);
for (int i=0; i<len/2; i++) {
*sum += ntohs(((unsigned short *)data)[i]);
}
}
unsigned short sum_final(unsigned int sum) {
sum = (sum >> 16) + (sum & 0xffff);
sum = (sum >> 16) + (sum & 0xffff);
return htons(~sum);
}
void fix_ip_sum(struct iphdr *ip) {
unsigned int sum = 0;
sum_accumulate(&sum, ip, sizeof(*ip));
ip->check = sum_final(sum);
}
void fix_tcp_sum(struct iphdr *ip, struct tcphdr *tcp) {
unsigned int sum = 0;
struct {
unsigned int saddr;
unsigned int daddr;
unsigned char pad;
unsigned char proto_num;
unsigned short tcp_len;
} fakehdr = {
.saddr = ip->saddr,
.daddr = ip->daddr,
.proto_num = ip->protocol,
.tcp_len = htons(ntohs(ip->tot_len) - ip->ihl*4)
};
sum_accumulate(&sum, &fakehdr, sizeof(fakehdr));
sum_accumulate(&sum, tcp, tcp->doff*4);
tcp->check = sum_final(sum);
}
int main(void) {
int tun_fd = tun_alloc("inject_dev%d");
systemf("ip link set %s up", devname);
systemf("ip addr add 192.168.42.1/24 dev %s", devname);
struct {
struct iphdr ip;
struct tcphdr tcp;
unsigned char tcp_opts[20];
} __attribute__((packed)) syn_packet = {
.ip = {
.ihl = sizeof(struct iphdr)/4,
.version = 4,
.tot_len = htons(sizeof(syn_packet)),
.ttl = 30,
.protocol = IPPROTO_TCP,
/* FIXUP check */
.saddr = IPADDR(192,168,42,2),
.daddr = IPADDR(192,168,42,1)
},
.tcp = {
.source = htons(1),
.dest = htons(1337),
.seq = 0x12345678,
.doff = (sizeof(syn_packet.tcp)+sizeof(syn_packet.tcp_opts))/4,
.syn = 1,
.window = htons(64),
.check = 0 /*FIXUP*/
},
.tcp_opts = {
/* INVALID: trailing MD5SIG opcode after NOPs */
1, 1, 1, 1, 1,
1, 1, 1, 1, 1,
1, 1, 1, 1, 1,
1, 1, 1, 1, 19
}
};
fix_ip_sum(&syn_packet.ip);
fix_tcp_sum(&syn_packet.ip, &syn_packet.tcp);
while (1) {
int write_res = write(tun_fd, &syn_packet, sizeof(syn_packet));
if (write_res != sizeof(syn_packet))
err(1, "packet write failed");
}
}
====================================
Fixes:
cfb6eeb4c860 ("[TCP]: MD5 Signature Option (RFC2385) support.")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>