OSDN Git Service
Hui Tang [Thu, 20 May 2021 03:47:52 +0000 (11:47 +0800)]
net: appletalk: remove leading spaces before tabs
There are a few leading spaces before tabs and remove it by running
the following commard:
$ find . -name '*.[ch]' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hui Tang [Thu, 20 May 2021 03:47:51 +0000 (11:47 +0800)]
net: fddi: skfp: remove leading spaces before tabs
There are a few leading spaces before tabs and remove it by running
the following commard:
$ find . -name '*.[ch]' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hui Tang [Thu, 20 May 2021 03:47:50 +0000 (11:47 +0800)]
net: hamradio: remove leading spaces before tabs
There are a few leading spaces before tabs and remove it by running
the following commard:
$ find . -name '*.[ch]' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hui Tang [Thu, 20 May 2021 03:47:49 +0000 (11:47 +0800)]
net: ppp: remove leading spaces before tabs
There are a few leading spaces before tabs and remove it by running
the following commard:
$ find . -name '*.[ch]' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Tom Parkin <tparkin@katalix.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hui Tang [Thu, 20 May 2021 03:47:48 +0000 (11:47 +0800)]
net: slip: remove leading spaces before tabs
There are a few leading spaces before tabs and remove it by running
the following commard:
$ find . -name '*.[ch]' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hui Tang [Thu, 20 May 2021 03:47:47 +0000 (11:47 +0800)]
net: usb: remove leading spaces before tabs
There are a few leading spaces before tabs and remove it by running
the following commard:
$ find . -name '*.[ch]' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hui Tang [Thu, 20 May 2021 03:47:46 +0000 (11:47 +0800)]
net: wan: remove leading spaces before tabs
There are a few leading spaces before tabs and remove it by running
the following commard:
$ find . -name '*.[ch]' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Xie He <xie.he.0141@gmail.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 20 May 2021 22:01:04 +0000 (15:01 -0700)]
Merge branch 'hns3-debugfs'
Huazhong Tan says:
====================
net: hns3: refactor some debugfs commands
This series refactors the debugfs command to the new
process and removes the useless debugfs file node cmd
for the HNS3 ethernet driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Yufeng Mo [Thu, 20 May 2021 02:21:44 +0000 (10:21 +0800)]
net: hns3: remove the useless debugfs file node cmd
Currently, all debugfs commands have been reconstructed, and the
debugfs file node cmd is useless. So remove this debugfs file node.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yufeng Mo [Thu, 20 May 2021 02:21:43 +0000 (10:21 +0800)]
net: hns3: refactor dump serv info of debugfs
Currently, the debugfs command for serv info is implemented by
"echo xxxx > cmd", and record the inforamtion in dmesg. It's
unnecessary and heavy. To improve it, create a single file
"serv_info" for it, and query it by command "cat serv_info",
return the result to userspace, rather than record in dmesg.
The display style is below:
$ cat service_task_info
local_clock: [ 114.203321]
delta: 784(ms)
last_service_task_processed:
4294918512(jiffies)
last_service_task_cnt: 4
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiaran Zhang [Thu, 20 May 2021 02:21:42 +0000 (10:21 +0800)]
net: hns3: refactor dump mac tnl status of debugfs
Currently, the debugfs command for dump mac tnl status is
implemented by "echo xxxx > cmd", and record the information
in dmesg. It's unnecessary and heavy. To improve it, create
a single file "mac_tnl_status" for it, and query it by command
"cat mac_tnl_status", return the result to userspace, rather
than record in dmesg.
The display style is below:
$ cat mac_tnl_status
Recently generated mac tnl interruption:
[
0111204.175437] status = 0x30
[
0154120.329912] status = 0x30
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guangbin Huang [Thu, 20 May 2021 02:21:41 +0000 (10:21 +0800)]
net: hns3: refactor dump qs shaper of debugfs
Currently, user gets qset shaper parameters by implementing debugfs
command "echo dump qs shaper > cmd", this command will dump info in
dmesg. It's unnecessary and heavy.
As there is "tm_qset" file in tm directory for dump qset info, to
optimize these command, merge qset shaper parameters to tm_qset
file and use cat command to get them.
The display style is below:
$ cat tm_qset
ID MAP_PRI LINK_VLD MODE DWRR IR_B IR_U IR_S BS_B BS_S FLAG
0000 0 1 dwrr 100 150 7 0 5 20 0
0001 0 0 sp 0 150 7 0 5 20 0
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guangbin Huang [Thu, 20 May 2021 02:21:40 +0000 (10:21 +0800)]
net: hns3: refactor dump qos buf cfg of debugfs
Currently, user gets qos buffer config by implementing debugfs command
"echo dump qos buf cfg > cmd", this command will dump info in dmesg.
It's unnecessary and heavy.
To optimize it, create a single file "qos_buf_cfg" in tm directory
and use cat command to get info. It will return info to userspace,
rather than record in dmesg.
The display style is below:
$ cat qos_buf_cfg
tx_packet_buf_tc_0: 0x120
tx_packet_buf_tc_1: 0x120
tx_packet_buf_tc_2: 0x120
tx_packet_buf_tc_3: 0x120
tx_packet_buf_tc_4: 0x0
tx_packet_buf_tc_5: 0x0
tx_packet_buf_tc_6: 0x0
tx_packet_buf_tc_7: 0x0
......
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guangbin Huang [Thu, 20 May 2021 02:21:39 +0000 (10:21 +0800)]
net: hns3: refactor dump qos pri map of debugfs
Currently, user gets priority map by implementing debugfs command
"echo dump qos pri map > cmd", this command will dump info in dmesg.
It's unnecessary and heavy.
To optimize it, create a single file "qos_pri_map" in tm directory
and use cat command to get info. It will return info to userspace,
rather than record in dmesg.
The display style is below:
$ cat qos_pri_map
vlan_to_pri: 0
PRI TC
0 0
1 1
2 2
3 3
4 0
5 1
6 2
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guangbin Huang [Thu, 20 May 2021 02:21:38 +0000 (10:21 +0800)]
net: hns3: refactor dump qos pause cfg of debugfs
Currently, user gets pause config by implementing debugfs command
"echo dump qos pause cfg > cmd", this command will dump info in dmesg.
It's unnecessary and heavy.
To optimize it, create a single file "qos_pause_cfg" in tm directory
and use cat command to get info. It will return info to userspace,
rather than record in dmesg.
The display style is below:
$ cat qos_pause_cfg
pause_trans_gap: 0x7f
pause_trans_time: 0xffff
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guangbin Huang [Thu, 20 May 2021 02:21:37 +0000 (10:21 +0800)]
net: hns3: refactor dump tc of debugfs
Currently, user gets tc schedule info by implementing debugfs command
"echo dump tc > cmd", this command will dump info in dmesg. It's
unnecessary and heavy.
To optimize it, create a single file "tc_sch_info" and use cat command
to get info. It will return info to userspace, rather than record in
dmesg.
The display style is below:
$ cat tc_sch_info
enabled tc number: 4
weight_offset: 14
TC MODE WEIGHT
0 dwrr 25
1 dwrr 25
2 dwrr 25
3 dwrr 25
4 dwrr 0
5 dwrr 0
6 dwrr 0
7 dwrr 0
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guangbin Huang [Thu, 20 May 2021 02:21:36 +0000 (10:21 +0800)]
net: hns3: refactor dump tm of debugfs
Currently, user gets some tm info by implementing debugfs command
"echo dump tm > cmd", this command will dump info in dmesg. It's
unnecessary and heavy.
In addition, the info of this command mixes info of qset, priority,
pg and port. Qset and priority have their own command to get info of
themself, so can remove info of qset and priority from this command.
To optimize it, create two new files "tm_pg", "tm_port" in tm directory
and use cat command to separately get info of pg and port.
The display style is below:
$ cat tm_pg
ID PRI_MAP MODE DWRR C_IR_B C_IR_U C_IR_S C_BS_B C_BS_S ...
00 0x1f dwrr 1 75 9 0 31 20 ...
$ cat tm_port
IR_B IR_U IR_S BS_B BS_S FLAG RATE(Mbps)
75 9 0 31 20 1 200000
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guangbin Huang [Thu, 20 May 2021 02:21:35 +0000 (10:21 +0800)]
net: hns3: refactor dump tm map of debugfs
Currently, the debugfs command for tm map is implemented by
"echo xxxx > cmd", and record the information in dmesg. It's
unnecessary and heavy. To improve it, create a single file
"tm_map" for it, and query it by command "cat tm_map",
return the result to userspace, rather than record in dmesg.
As user can't specify queue id in cat command, driver will return info
of all queue id.
The display style is below:
$ cat tm_map
queue_id qset_id pri_id tc_id
0000 0000 00 00
INDEX | TM BP QSET MAPPING:
0000 |
00000000:
00000000:
00000000:
00000000:
00000000:
00000000:
00000000
0256 |
00000000:
00000000:
00000000:
00000000:
00000000:
00000002:
00000000
0512 |
00000000:
00000000:
00000000:
00000004:
00000000:
00000000:
00000000
0768 |
00000000:
00000008:
00000000:
00000000:
00000000:
00000000:
00000000
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hao Chen [Thu, 20 May 2021 02:21:34 +0000 (10:21 +0800)]
net: hns3: refactor dump fd tcam of debugfs
Currently, the debugfs command for fd tcam is implemented by
"echo xxxx > cmd", and record the information in dmesg. It's
unnecessary and heavy. To improve it, create a single file
"fd_tcam" for it, and query it by command "cat fd_tcam",
return the result to userspace, rather than record in dmesg.
The display style is below:
$ cat fd_tcam
read result tcam key x(31):
00000000
00000000
00000000
08000000
00000600
00000000
00000000
00000000
00000000
00000000
00000000
00000000
00000000
read result tcam key y(31):
00000000
00000000
00000000
f7ff0000
0000f900
00000000
00000000
00000000
00000000
00000000
00000000
00000000
0000fff8
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hao Chen [Thu, 20 May 2021 02:21:33 +0000 (10:21 +0800)]
net: hns3: refactor queue info of debugfs
Currently, the debugfs command for queue info is implemented by
"echo xxxx > cmd", and record the information in dmesg. It's
unnecessary and heavy. To improve it, create two files
"rx_queue_info" and "tx_queue_info" for it, and query it
by command "cat rx_queue_info" and "cat tx_queue_info",
return the result to userspace, rather than record in dmesg.
The display style is below:
$ cat rx_queue_info
QUEUE_ID BD_NUM BD_LEN TAIL HEAD FBDNUM PKTNUM ...
0 0 0 0 0 0 0 ...
1 0 0 0 0 0 0 ...
2 0 0 0 0 0 0 ...
$ cat tx_queue_info
QUEUE_ID BD_NUM TC TAIL HEAD FBDNUM OFFSET PKTNUM ...
0 0 0 0 0 0 0 0 ...
1 0 0 0 0 0 0 0 ...
2 0 0 0 0 0 0 0 ...
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hao Chen [Thu, 20 May 2021 02:21:32 +0000 (10:21 +0800)]
net: hns3: refactor queue map of debugfs
Currently, the debugfs command for queue map is implemented by
"echo xxxx > cmd", and record the information in dmesg. It's
unnecessary and heavy. To improve it, create a single file
"queue_map" for it, and query it by command "cat queue_map",
return the result to userspace, rather than record in dmesg.
The display style is below:
$ cat queue_map
local_queue_id global_queue_id vector_id
0 0 341
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yufeng Mo [Thu, 20 May 2021 02:21:31 +0000 (10:21 +0800)]
net: hns3: refactor dump reg dcb info of debugfs
Currently, the debugfs command for reg dcb info is implemented by
"echo xxxx > cmd", and record the information in dmesg. It's
unnecessary and heavy. To improve it, create a single file
"dcb" for it, and query it by command "cat dcb",
return the result to userspace, rather than record in dmesg.
The display style is below:
$ cat dcb
qset_id roce_qset_mask nic_qset_mask qset_shaping_pass qset_bp_status
0000 0x1 0x1 0x1 0x0
0001 0x1 0x1 0x1 0x0
0002 0x1 0x1 0x1 0x0
0003 0x1 0x1 0x1 0x0
0004 0x1 0x1 0x1 0x0
0005 0x1 0x1 0x1 0x0
0006 0x1 0x1 0x1 0x0
0007 0x1 0x1 0x1 0x0
pri_id pri_mask pri_cshaping_pass pri_pshaping_pass
000 0x1 0x0 0x1
001 0x1 0x0 0x0
002 0x1 0x0 0x0
003 0x1 0x0 0x0
004 0x1 0x0 0x0
005 0x1 0x0 0x0
006 0x1 0x0 0x0
007 0x1 0x0 0x0
pg_id pg_mask pg_cshaping_pass pg_pshaping_pass
000 0x1 0x0 0x1
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yufeng Mo [Thu, 20 May 2021 02:21:30 +0000 (10:21 +0800)]
net: hns3: refactor dump reg of debugfs
Currently, the debugfs command for reg is implemented by
"echo xxxx > cmd", and record the information in dmesg. It's
unnecessary and heavy. To improve it, create some files
"bios_common/ssu/igu_egu/rpu/ncsi/rtc/ppp/rcb/tqp/mac" for it,
and query it by command "cat xxx", return the result to
userspace, rather than record in dmesg.
The display style is below:
$ cat bios_common
BP_CPU_STATE: 0x0
DFX_MSIX_INFO_NIC_0: 0xc000
DFX_MSIX_INFO_NIC_1: 0x0
DFX_MSIX_INFO_NIC_2: 0x0
DFX_MSIX_INFO_NIC_3: 0x0
DFX_MSIX_INFO_ROC_0: 0xc000
DFX_MSIX_INFO_ROC_1: 0x0
DFX_MSIX_INFO_ROC_2: 0x0
DFX_MSIX_INFO_ROC_3: 0x0
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zhen Lei [Thu, 20 May 2021 02:14:11 +0000 (10:14 +0800)]
mISDN: Remove obsolete PIPELINE_DEBUG debugging information
As Leon Romanovsky's tips:
The definition of macro PIPELINE_DEBUG is commented more than 10 years ago
and can be seen as a dead code that should be removed.
Suggested-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 19 May 2021 20:27:42 +0000 (13:27 -0700)]
Merge branch 'mt7530-interrupt-support'
DENG Qingfang says:
====================
MT7530 interrupt support
Add support for MT7530 interrupt controller.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
DENG Qingfang [Wed, 19 May 2021 03:32:02 +0000 (11:32 +0800)]
staging: mt7621-dts: enable MT7530 interrupt controller
Enable MT7530 interrupt controller in the MT7621 SoC.
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
DENG Qingfang [Wed, 19 May 2021 03:32:01 +0000 (11:32 +0800)]
dt-bindings: net: dsa: add MT7530 interrupt controller binding
Add device tree binding to support MT7530 interrupt controller.
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
DENG Qingfang [Wed, 19 May 2021 03:32:00 +0000 (11:32 +0800)]
net: dsa: mt7530: add interrupt support
Add support for MT7530 interrupt controller to handle internal PHYs.
In order to assign an IRQ number to each PHY, the registration of MDIO bus
is also done in this driver.
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
DENG Qingfang [Wed, 19 May 2021 03:31:59 +0000 (11:31 +0800)]
net: phy: add MediaTek Gigabit Ethernet PHY driver
Add support for MediaTek Gigabit Ethernet PHYs found in MT7530 and
MT7531 switches.
The initialization procedure is from the vendor driver, but due to lack
of documentation, the function of some register values remains unknown.
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Yongjun [Wed, 19 May 2021 15:58:52 +0000 (15:58 +0000)]
net: qrtr: ns: Fix error return code in qrtr_ns_init()
Fix to return a negative error code -ENOMEM from the error handling
case instead of 0, as done elsewhere in this function.
Fixes:
c6e08d6251f3 ("net: qrtr: Allocate workqueue before kernel_bind")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Yongjun [Wed, 19 May 2021 14:16:27 +0000 (14:16 +0000)]
net: ethernet: ixp4xx: Fix return value check in ixp4xx_eth_probe()
In case of error, the function mdiobus_get_phy() returns NULL
pointer not ERR_PTR(). The IS_ERR() test in the return value
check should be replaced with NULL test.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Davide Caratti [Wed, 19 May 2021 13:17:21 +0000 (15:17 +0200)]
net/sched: cls_api: increase max_reclassify_loop
modern userspace applications, like OVN, can configure the TC datapath to
"recirculate" packets several times. If more than 4 "recirculation" rules
are configured, packets can be dropped by __tcf_classify().
Changing the maximum number of reclassifications (from 4 to 16) should be
sufficient to prevent drops in most use cases, and guard against loops at
the same time.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 19 May 2021 19:58:29 +0000 (12:58 -0700)]
Merge git://git./linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-05-19
The following pull-request contains BPF updates for your *net-next* tree.
We've added 43 non-merge commits during the last 11 day(s) which contain
a total of 74 files changed, 3717 insertions(+), 578 deletions(-).
The main changes are:
1) syscall program type, fd array, and light skeleton, from Alexei.
2) Stop emitting static variables in skeleton, from Andrii.
3) Low level tc-bpf api, from Kumar.
4) Reduce verifier kmalloc/kfree churn, from Lorenz.
====================
David S. Miller [Wed, 19 May 2021 19:47:47 +0000 (12:47 -0700)]
Merge branch 'mlxsw-mphash-policies'
Ido Schimmel says:
====================
mlxsw: Add support for new multipath hash policies
This patchset adds support for two new multipath hash policies in mlxsw.
Patch #1 emits net events whenever the
net.ipv{4,6}.fib_multipath_hash_fields sysctls are changed. This allows
listeners to react to changes in the packet fields used for the
computation of the multipath hash.
Patches #2-#3 refactor the code in mlxsw that is responsible for the
configuration of the multipath hash, so that it will be easier to extend
for the two new policies.
Patch #4 adds the register fields required to support the new policies.
Patch #5-#7 add support for inner layer 3 and custom multipath hash
policies.
Tested using following forwarding selftests:
* custom_multipath_hash.sh
* gre_custom_multipath_hash.sh
* gre_inner_v4_multipath.sh
* gre_inner_v6_multipath.sh
====================
Ido Schimmel [Wed, 19 May 2021 12:08:24 +0000 (15:08 +0300)]
mlxsw: spectrum_router: Add support for custom multipath hash policy
When this policy is set, only enable the packet fields that were enabled
by user space for multipath hash computation.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 19 May 2021 12:08:23 +0000 (15:08 +0300)]
mlxsw: spectrum_router: Add support for inner layer 3 multipath hash policy
When this policy is set, the kernel uses the inner layer 3 fields for
multipath hash computation and falls back to the outer fields if no
encapsulation was encountered. This behavior is most likely influenced
by the behavior of the flow dissector, which is used for the packet
dissection.
The Spectrum ASIC, however, cannot fallback to outer fields if inner
fields are not available. This should not result in a discrepancy from
the software data path because if several flows have matching inner
fields, they will tend to have matching outer fields as well.
Therefore, implement this policy by enabling both outer and inner layer
3 fields for the multipath hash computation.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 19 May 2021 12:08:22 +0000 (15:08 +0300)]
mlxsw: spectrum_outer: Factor out helper for common outer fields
Outer IPv4 and IPv6 addresses are used by multiple multipath hash
policies. Factor out helpers that set these fields to increase code
sharing between different policies.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 19 May 2021 12:08:21 +0000 (15:08 +0300)]
mlxsw: reg: Add inner packet fields to RECRv2 register
The RECRv2 register is used for setting up the router's ECMP hash
configuration. Extend it with inner packet fields to allow the ECMP hash
to be calculated based on inner flow information.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 19 May 2021 12:08:20 +0000 (15:08 +0300)]
mlxsw: spectrum_router: Move multipath hash configuration to a bitmap
Currently, the multipath hash configuration is written directly to the
register payload. While this is OK for the two currently supported
policies, it is going to be hard to follow when more policies and more
packet fields are added.
Instead, set the required headers and fields in a bitmap and then dump
it to the register payload.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 19 May 2021 12:08:19 +0000 (15:08 +0300)]
mlxsw: spectrum_router: Replace if statement with a switch statement
The code was written when only two multipath hash policies were present,
so the if statement was sufficient. The next patch and future patches
are going to add support for more policies, so move to a switch
statement.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 19 May 2021 12:08:18 +0000 (15:08 +0300)]
net: Add notifications when multipath hash field change
In-kernel notifications are already sent when the multipath hash policy
itself changes, but not when the multipath hash fields change.
Add these notifications, so that interested listeners (e.g., switch ASIC
drivers) could perform the necessary configuration.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephan Gerhold [Wed, 19 May 2021 09:16:13 +0000 (11:16 +0200)]
nfc: s3fwrn5: i2c: Enable optional clock from device tree
S3FWRN5 depends on a clock input ("XI" pin) to function properly.
Depending on the hardware configuration this could be an always-on
oscillator or some external clock that must be explicitly enabled.
So far we assumed that the clock is always-on.
Make the driver request an (optional) clock from the device tree
and make sure the clock is running before starting S3FWRN5.
Note: S3FWRN5 asserts "GPIO2" whenever it needs the clock input to
function correctly. On some hardware configurations, GPIO2 is
connected directly to an input pin of the external clock provider
(e.g. the main PMIC of the SoC). In that case, it can automatically
AND the clock enable bit and clock request from S3FWRN5 so that
the clock is actually only enabled when needed.
It is also conceivable that on some other hardware configuration
S3FWRN5's GPIO2 might be connected as a regular GPIO input
of the SoC. In that case, follow-up patches could extend the
driver to request the GPIO, set up an interrupt and only enable
the clock when requested by S3FWRN5.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephan Gerhold [Wed, 19 May 2021 09:16:12 +0000 (11:16 +0200)]
dt-bindings: net: nfc: s3fwrn5: Add optional clock
On some systems, S3FWRN5 depends on having an external clock enabled
to function correctly. Allow declaring that clock in the device tree.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zheng Yejian [Wed, 19 May 2021 07:34:38 +0000 (15:34 +0800)]
netlabel: remove unused parameter in netlbl_netlink_auditinfo()
loginuid/sessionid/secid have been read from 'current' instead of struct
netlink_skb_parms, the parameter 'skb' seems no longer needed.
Fixes:
c53fa1ed92cd ("netlink: kill loginuid/sessionid/sid members from struct netlink_skb_parms")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 19 May 2021 19:23:25 +0000 (12:23 -0700)]
Merge branch 'intel-cleanups'
Guangbin Huang says:
====================
net: intel: some cleanups
This patchset adds some cleanups for intel e1000/e1000e ethernet driver.
====================
Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hao Chen [Wed, 19 May 2021 06:14:45 +0000 (14:14 +0800)]
net: e1000e: fix misspell word "retreived"
There is a misspell word "retreived" in comment, so fix it to "retrieved".
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hao Chen [Wed, 19 May 2021 06:14:44 +0000 (14:14 +0800)]
net: e1000e: remove repeated word "slot" for netdev.c
There are double "slot" in comment, so remove the redundant one.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hao Chen [Wed, 19 May 2021 06:14:43 +0000 (14:14 +0800)]
net: e1000e: remove repeated word "the" for ich8lan.c
There are double "the" in comment, so remove the redundant one.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hao Chen [Wed, 19 May 2021 06:14:42 +0000 (14:14 +0800)]
net: e1000: remove repeated words for e1000_hw.c
There are double "in" and "to" in comments, so remove the redundant one.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hao Chen [Wed, 19 May 2021 06:14:41 +0000 (14:14 +0800)]
net: e1000: remove repeated word "slot" for e1000_main.c
There are double "slot" in comment, so remove the redundant one.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 19 May 2021 19:17:32 +0000 (12:17 -0700)]
Merge branch 'net-dev-leading-spaces'
Hui Tang says:
====================
net: ethernet: remove leading spaces before tabs
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Hui Tang [Wed, 19 May 2021 05:30:53 +0000 (13:30 +0800)]
net: fujitsu: remove leading spaces before tabs
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hui Tang [Wed, 19 May 2021 05:30:52 +0000 (13:30 +0800)]
net: 8390: remove leading spaces before tabs
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hui Tang [Wed, 19 May 2021 05:30:51 +0000 (13:30 +0800)]
net: xircom: remove leading spaces before tabs
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hui Tang [Wed, 19 May 2021 05:30:50 +0000 (13:30 +0800)]
net: fealnx: remove leading spaces before tabs
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hui Tang [Wed, 19 May 2021 05:30:49 +0000 (13:30 +0800)]
net: sun: remove leading spaces before tabs
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hui Tang [Wed, 19 May 2021 05:30:48 +0000 (13:30 +0800)]
net: smsc: remove leading spaces before tabs
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hui Tang [Wed, 19 May 2021 05:30:47 +0000 (13:30 +0800)]
net: sis: remove leading spaces before tabs
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hui Tang [Wed, 19 May 2021 05:30:46 +0000 (13:30 +0800)]
net: seeq: remove leading spaces before tabs
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hui Tang [Wed, 19 May 2021 05:30:45 +0000 (13:30 +0800)]
net: realtek: remove leading spaces before tabs
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hui Tang [Wed, 19 May 2021 05:30:44 +0000 (13:30 +0800)]
net: natsemi: remove leading spaces before tabs
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hui Tang [Wed, 19 May 2021 05:30:43 +0000 (13:30 +0800)]
net: marvell: remove leading spaces before tabs
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hui Tang [Wed, 19 May 2021 05:30:42 +0000 (13:30 +0800)]
net: ibm: remove leading spaces before tabs
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Acked-by: Lijun Pan <lijunp213@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hui Tang [Wed, 19 May 2021 05:30:41 +0000 (13:30 +0800)]
net: dlink: remove leading spaces before tabs
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: "Alexander A. Klimov" <grandmaster@al2klimov.de>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hui Tang [Wed, 19 May 2021 05:30:40 +0000 (13:30 +0800)]
net: dec: remove leading spaces before tabs
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hui Tang [Wed, 19 May 2021 05:30:39 +0000 (13:30 +0800)]
net: chelsio: remove leading spaces before tabs
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hui Tang [Wed, 19 May 2021 05:30:38 +0000 (13:30 +0800)]
net: broadcom: remove leading spaces before tabs
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hui Tang [Wed, 19 May 2021 05:30:37 +0000 (13:30 +0800)]
net: apple: remove leading spaces before tabs
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hui Tang [Wed, 19 May 2021 05:30:36 +0000 (13:30 +0800)]
net: amd: remove leading spaces before tabs
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hui Tang [Wed, 19 May 2021 05:30:35 +0000 (13:30 +0800)]
net: alteon: remove leading spaces before tabs
There are a few leading spaces before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Jes Sorensen <jes@trained-monkey.org>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hui Tang [Wed, 19 May 2021 05:30:34 +0000 (13:30 +0800)]
net: 3com: remove leading spaces before tabs
There are a few leading space before tabs and remove it by running the
following commard:
$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'
Cc: Steffen Klassert <klassert@kernel.org>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
YueHaibing [Wed, 19 May 2021 02:38:50 +0000 (10:38 +0800)]
tun: use DEVICE_ATTR_RO macro
Use DEVICE_ATTR_RO helper instead of plain DEVICE_ATTR,
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
YueHaibing [Wed, 19 May 2021 02:28:49 +0000 (10:28 +0800)]
ibmveth: fix kobj_to_dev.cocci warnings
Use kobj_to_dev() instead of container_of()
Generated by: scripts/coccinelle/api/kobj_to_dev.cocci
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Lijun Pan <lijunp213@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pu Lehui [Wed, 19 May 2021 06:41:16 +0000 (14:41 +0800)]
bpf: Make some symbols static
The sparse tool complains as follows:
kernel/bpf/syscall.c:4567:29: warning:
symbol 'bpf_sys_bpf_proto' was not declared. Should it be static?
kernel/bpf/syscall.c:4592:29: warning:
symbol 'bpf_sys_close_proto' was not declared. Should it be static?
This symbol is not used outside of syscall.c, so marks it static.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210519064116.240536-1-pulehui@huawei.com
Alexei Starovoitov [Wed, 19 May 2021 01:40:32 +0000 (18:40 -0700)]
bpf: Add cmd alias BPF_PROG_RUN
Add BPF_PROG_RUN command as an alias to BPF_RPOG_TEST_RUN to better
indicate the full range of use cases done by the command.
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210519014032.20908-1-alexei.starovoitov@gmail.com
Daniel Borkmann [Wed, 19 May 2021 13:27:32 +0000 (15:27 +0200)]
Merge branch 'bpf-loader-progs'
Alexei Starovoitov says:
====================
v5->v6:
- fixed issue found by bpf CI. The light skeleton generation was
doing a dry-run of loading the program where all actual sys_bpf syscalls
were replaced by calls into gen_loader. Turned out that search for valid
vmlinux_btf was not stubbed out which was causing light skeleton gen
to fail on older kernels.
- significantly reduced verbosity of gen_loader.c.
- an example trace_printk.lskel.h generated out of progs/trace_printk.c
https://gist.github.com/4ast/
774ea58f8286abac6aa8e3bf3bf3b903
v4->v5:
- addressed a bunch of minor comments from Andrii.
- the main difference is that lskel is now more robust in case of errors
and a bit cleaner looking.
v3->v4:
- cleaned up closing of temporary FDs in case intermediate sys_bpf fails during
execution of loader program.
- added support for rodata in the skeleton.
- enforce bpf_prog_type_syscall to be sleepable, since it needs bpf_copy_from_user
to populate rodata map.
- converted test trace_printk to use lskel to test rodata access.
- various small bug fixes.
v2->v3: Addressed comments from Andrii and John.
- added support for setting max_entries after signature verification
and used it in ringbuf test, since ringbuf's max_entries has to be updated
after skeleton open() and before load(). See patch 20.
- bpf_btf_find_by_name_kind doesn't take btf_fd anymore.
Because of that removed attach_prog_fd from bpf_prog_desc in lskel.
Both features to be added later.
- cleaned up closing of fd==0 during loader gen by resetting fds back to -1.
- converted loader gen to use memset(&attr, cmd_specific_attr_size).
would love to see this optimization in the rest of libbpf.
- fixed memory leak during loader_gen in case of enomem.
- support for fd_array kernel feature is added in patch 9 to have
exhaustive testing across all selftests and then partially reverted
in patch 15 to keep old style map_fd patching tested as well.
- since fentry_test/fexit_tests were extended with re-attach had to add
support for per-program attach method in lskel and use it in the tests.
- cleanup closing of fds in lskel in case of partial failures.
- fixed numerous small nits.
v1->v2: Addressed comments from Al, Yonghong and Andrii.
- documented sys_close fdget/fdput requirement and non-recursion check.
- reduced internal api leaks between libbpf and bpftool.
Now bpf_object__gen_loader() is the only new libbf api with minimal fields.
- fixed light skeleton __destroy() method to munmap and close maps and progs.
- refactored bpf_btf_find_by_name_kind to return btf_id | (btf_obj_fd << 32).
- refactored use of bpf_btf_find_by_name_kind from loader prog.
- moved auto-gen like code into skel_internal.h that is used by *.lskel.h
It has minimal static inline bpf_load_and_run() method used by lskel.
- added lksel.h example in patch 15.
- replaced union bpf_map_prog_desc with struct bpf_map_desc and struct bpf_prog_desc.
- removed mark_feat_supported and added a patch to pass 'obj' into kernel_supports.
- added proper tracking of temporary FDs in loader prog and their cleanup via bpf_sys_close.
- rename gen_trace.c into gen_loader.c to better align the naming throughout.
- expanded number of available helpers in new prog type.
- added support for raw_tp attaching in lskel.
lskel supports tracing and raw_tp progs now.
It correctly loads all networking prog types too, but __attach() method is tbd.
- converted progs/test_ksyms_module.c to lskel.
- minor feedback fixes all over.
The description of V1 set is still valid:
This is a first step towards signed bpf programs and the third approach of that kind.
The first approach was to bring libbpf into the kernel as a user-mode-driver.
The second approach was to invent a new file format and let kernel execute
that format as a sequence of syscalls that create maps and load programs.
This third approach is using new type of bpf program instead of inventing file format.
1st and 2nd approaches had too many downsides comparing to this 3rd and were discarded
after months of work.
To make it work the following new concepts are introduced:
1. syscall bpf program type
A kind of bpf program that can do sys_bpf and sys_close syscalls.
It can only execute in user context.
2. FD array or FD index.
Traditionally BPF instructions are patched with FDs.
What it means that maps has to be created first and then instructions modified
which breaks signature verification if the program is signed.
Instead of patching each instruction with FD patch it with an index into array of FDs.
That makes the program signature stable if it uses maps.
3. loader program that is generated as "strace of libbpf".
When libbpf is loading bpf_file.o it does a bunch of sys_bpf() syscalls to
load BTF, create maps, populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map and single bpf program that
does those syscalls.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
4. light skeleton
Instead of embedding the whole elf file into skeleton and using libbpf
to parse it later generate a loader program and embed it into "light skeleton".
Such skeleton can load the same set of elf files, but it doesn't need
libbpf and libelf to do that. It only needs few sys_bpf wrappers.
Future steps:
- support CO-RE in the kernel. This patch set is already too big,
so that critical feature is left for the next step.
- generate light skeleton in golang to allow such users use BTF and
all other features provided by libbpf
- generate light skeleton for kernel, so that bpf programs can be embeded
in the kernel module. The UMD usage in bpf_preload will be replaced with
such skeleton, so bpf_preload would become a standard kernel module
without user space dependency.
- finally do the signing of the loader program.
The patches are work in progress with few rough edges.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Alexei Starovoitov [Fri, 14 May 2021 00:36:23 +0000 (17:36 -0700)]
selftests/bpf: Convert test trace_printk to lskel.
Convert test trace_printk to light skeleton to check
rodata support in lskel.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-22-alexei.starovoitov@gmail.com
Alexei Starovoitov [Fri, 14 May 2021 00:36:22 +0000 (17:36 -0700)]
selftests/bpf: Convert test printk to use rodata.
Convert test trace_printk to more aggressively validate and use rodata.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-21-alexei.starovoitov@gmail.com
Alexei Starovoitov [Fri, 14 May 2021 00:36:21 +0000 (17:36 -0700)]
selftests/bpf: Convert atomics test to light skeleton.
Convert prog_tests/atomics.c to lskel.h
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-20-alexei.starovoitov@gmail.com
Alexei Starovoitov [Fri, 14 May 2021 00:36:20 +0000 (17:36 -0700)]
selftests/bpf: Convert few tests to light skeleton.
Convert few tests that don't use CO-RE to light skeleton.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-19-alexei.starovoitov@gmail.com
Alexei Starovoitov [Fri, 14 May 2021 00:36:19 +0000 (17:36 -0700)]
bpftool: Use syscall/loader program in "prog load" and "gen skeleton" command.
Add -L flag to bpftool to use libbpf gen_trace facility and syscall/loader program
for skeleton generation and program loading.
"bpftool gen skeleton -L" command will generate a "light skeleton" or "loader skeleton"
that is similar to existing skeleton, but has one major difference:
$ bpftool gen skeleton lsm.o > lsm.skel.h
$ bpftool gen skeleton -L lsm.o > lsm.lskel.h
$ diff lsm.skel.h lsm.lskel.h
@@ -5,34 +4,34 @@
#define __LSM_SKEL_H__
#include <stdlib.h>
-#include <bpf/libbpf.h>
+#include <bpf/bpf.h>
The light skeleton does not use majority of libbpf infrastructure.
It doesn't need libelf. It doesn't parse .o file.
It only needs few sys_bpf wrappers. All of them are in bpf/bpf.h file.
In future libbpf/bpf.c can be inlined into bpf.h, so not even libbpf.a would be
needed to work with light skeleton.
"bpftool prog load -L file.o" command is introduced for debugging of syscall/loader
program generation. Just like the same command without -L it will try to load
the programs from file.o into the kernel. It won't even try to pin them.
"bpftool prog load -L -d file.o" command will provide additional debug messages
on how syscall/loader program was generated.
Also the execution of syscall/loader program will use bpf_trace_printk() for
each step of loading BTF, creating maps, and loading programs.
The user can do "cat /.../trace_pipe" for further debug.
An example of fexit_sleep.lskel.h generated from progs/fexit_sleep.c:
struct fexit_sleep {
struct bpf_loader_ctx ctx;
struct {
struct bpf_map_desc bss;
} maps;
struct {
struct bpf_prog_desc nanosleep_fentry;
struct bpf_prog_desc nanosleep_fexit;
} progs;
struct {
int nanosleep_fentry_fd;
int nanosleep_fexit_fd;
} links;
struct fexit_sleep__bss {
int pid;
int fentry_cnt;
int fexit_cnt;
} *bss;
};
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-18-alexei.starovoitov@gmail.com
Alexei Starovoitov [Fri, 14 May 2021 00:36:18 +0000 (17:36 -0700)]
libbpf: Introduce bpf_map__initial_value().
Introduce bpf_map__initial_value() to read initial contents
of mmaped data/rodata/bss maps.
Note that bpf_map__set_initial_value() doesn't allow modifying
kconfig map while bpf_map__initial_value() allows reading
its values.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-17-alexei.starovoitov@gmail.com
Alexei Starovoitov [Fri, 14 May 2021 00:36:17 +0000 (17:36 -0700)]
libbpf: Cleanup temp FDs when intermediate sys_bpf fails.
Fix loader program to close temporary FDs when intermediate
sys_bpf command fails.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-16-alexei.starovoitov@gmail.com
Alexei Starovoitov [Fri, 14 May 2021 00:36:16 +0000 (17:36 -0700)]
libbpf: Generate loader program out of BPF ELF file.
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-15-alexei.starovoitov@gmail.com
Alexei Starovoitov [Fri, 14 May 2021 00:36:15 +0000 (17:36 -0700)]
libbpf: Preliminary support for fd_idx
Prep libbpf to use FD_IDX kernel feature when generating loader program.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-14-alexei.starovoitov@gmail.com
Alexei Starovoitov [Fri, 14 May 2021 00:36:14 +0000 (17:36 -0700)]
libbpf: Add bpf_object pointer to kernel_supports().
Add a pointer to 'struct bpf_object' to kernel_supports() helper.
It will be used in the next patch.
No functional changes.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-13-alexei.starovoitov@gmail.com
Alexei Starovoitov [Fri, 14 May 2021 00:36:13 +0000 (17:36 -0700)]
libbpf: Change the order of data and text relocations.
In order to be able to generate loader program in the later
patches change the order of data and text relocations.
Also improve the test to include data relos.
If the kernel supports "FD array" the map_fd relocations can be processed
before text relos since generated loader program won't need to manually
patch ld_imm64 insns with map_fd.
But ksym and kfunc relocations can only be processed after all calls
are relocated, since loader program will consist of a sequence
of calls to bpf_btf_find_by_name_kind() followed by patching of btf_id
and btf_obj_fd into corresponding ld_imm64 insns. The locations of those
ld_imm64 insns are specified in relocations.
Hence process all data relocations (maps, ksym, kfunc) together after call relos.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-12-alexei.starovoitov@gmail.com
Alexei Starovoitov [Fri, 14 May 2021 00:36:12 +0000 (17:36 -0700)]
bpf: Add bpf_sys_close() helper.
Add bpf_sys_close() helper to be used by the syscall/loader program to close
intermediate FDs and other cleanup.
Note this helper must never be allowed inside fdget/fdput bracketing.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-11-alexei.starovoitov@gmail.com
Alexei Starovoitov [Fri, 14 May 2021 00:36:11 +0000 (17:36 -0700)]
bpf: Add bpf_btf_find_by_name_kind() helper.
Add new helper:
long bpf_btf_find_by_name_kind(char *name, int name_sz, u32 kind, int flags)
Description
Find BTF type with given name and kind in vmlinux BTF or in module's BTFs.
Return
Returns btf_id and btf_obj_fd in lower and upper 32 bits.
It will be used by loader program to find btf_id to attach the program to
and to find btf_ids of ksyms.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-10-alexei.starovoitov@gmail.com
Alexei Starovoitov [Fri, 14 May 2021 00:36:10 +0000 (17:36 -0700)]
bpf: Introduce fd_idx
Typical program loading sequence involves creating bpf maps and applying
map FDs into bpf instructions in various places in the bpf program.
This job is done by libbpf that is using compiler generated ELF relocations
to patch certain instruction after maps are created and BTFs are loaded.
The goal of fd_idx is to allow bpf instructions to stay immutable
after compilation. At load time the libbpf would still create maps as usual,
but it wouldn't need to patch instructions. It would store map_fds into
__u32 fd_array[] and would pass that pointer to sys_bpf(BPF_PROG_LOAD).
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-9-alexei.starovoitov@gmail.com
Alexei Starovoitov [Fri, 14 May 2021 00:36:09 +0000 (17:36 -0700)]
selftests/bpf: Test for btf_load command.
Improve selftest to check that btf_load is working from bpf program.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-8-alexei.starovoitov@gmail.com
Alexei Starovoitov [Fri, 14 May 2021 00:36:08 +0000 (17:36 -0700)]
bpf: Make btf_load command to be bpfptr_t compatible.
Similar to prog_load make btf_load command to be availble to
bpf_prog_type_syscall program.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-7-alexei.starovoitov@gmail.com
Alexei Starovoitov [Fri, 14 May 2021 00:36:07 +0000 (17:36 -0700)]
selftests/bpf: Test for syscall program type
bpf_prog_type_syscall is a program that creates a bpf map,
updates it, and loads another bpf program using bpf_sys_bpf() helper.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-6-alexei.starovoitov@gmail.com
Alexei Starovoitov [Fri, 14 May 2021 00:36:06 +0000 (17:36 -0700)]
libbpf: Support for syscall program type
Trivial support for syscall program type.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-5-alexei.starovoitov@gmail.com
Alexei Starovoitov [Fri, 14 May 2021 00:36:05 +0000 (17:36 -0700)]
bpf: Prepare bpf syscall to be used from kernel and user space.
With the help from bpfptr_t prepare relevant bpf syscall commands
to be used from kernel and user space.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-4-alexei.starovoitov@gmail.com
Alexei Starovoitov [Fri, 14 May 2021 00:36:04 +0000 (17:36 -0700)]
bpf: Introduce bpfptr_t user/kernel pointer.
Similar to sockptr_t introduce bpfptr_t with few additions:
make_bpfptr() creates new user/kernel pointer in the same address space as
existing user/kernel pointer.
bpfptr_add() advances the user/kernel pointer.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-3-alexei.starovoitov@gmail.com
Alexei Starovoitov [Fri, 14 May 2021 00:36:03 +0000 (17:36 -0700)]
bpf: Introduce bpf_sys_bpf() helper and program type.
Add placeholders for bpf_sys_bpf() helper and new program type.
Make sure to check that expected_attach_type is zero for future extensibility.
Allow tracing helper functions to be used in this program type, since they will
only execute from user context via bpf_prog_test_run.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-2-alexei.starovoitov@gmail.com
Vladimir Oltean [Tue, 18 May 2021 17:49:24 +0000 (20:49 +0300)]
net: mdio: provide shim implementation of devm_of_mdiobus_register
Similar to the way in which of_mdiobus_register() has a fallback to the
non-DT based mdiobus_register() when CONFIG_OF is not set, we can create
a shim for the device-managed devm_of_mdiobus_register() which calls
devm_mdiobus_register() and discards the struct device_node *.
In particular, this solves a build issue with the qca8k DSA driver which
uses devm_of_mdiobus_register and can be compiled without CONFIG_OF.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yang Yingliang [Tue, 18 May 2021 13:03:58 +0000 (21:03 +0800)]
net: dcb: Remove unnecessary INIT_LIST_HEAD()
The list_head dcb_app_list is initialized statically.
It is unnecessary to initialize by INIT_LIST_HEAD().
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yang Yingliang [Tue, 18 May 2021 13:01:35 +0000 (21:01 +0800)]
cxgb4: clip_tbl: use list_del_init instead of list_del/INIT_LIST_HEAD
Using list_del_init() instead of list_del() + INIT_LIST_HEAD()
to simpify the code.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>