OSDN Git Service
Wei Fang [Thu, 6 Jul 2023 08:10:10 +0000 (16:10 +0800)]
net: fec: recycle pages for transmitted XDP frames
Once the XDP frames have been successfully transmitted through the
ndo_xdp_xmit() interface, it's the driver responsibility to free
the frames so that the page_pool can recycle the pages and reuse
them. However, this action is not implemented in the fec driver.
This leads to a user-visible problem that the console will print
the following warning log.
[ 157.568851] page_pool_release_retry() stalled pool shutdown 1389 inflight 60 sec
[ 217.983446] page_pool_release_retry() stalled pool shutdown 1389 inflight 120 sec
[ 278.399006] page_pool_release_retry() stalled pool shutdown 1389 inflight 181 sec
[ 338.812885] page_pool_release_retry() stalled pool shutdown 1389 inflight 241 sec
[ 399.226946] page_pool_release_retry() stalled pool shutdown 1389 inflight 302 sec
Therefore, to solve this issue, we free XDP frames via xdp_return_frame()
while cleaning the tx BD ring.
Fixes:
6d6b39f180b8 ("net: fec: add initial XDP support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Wei Fang [Thu, 6 Jul 2023 08:10:09 +0000 (16:10 +0800)]
net: fec: dynamically set the NETDEV_XDP_ACT_NDO_XMIT feature of XDP
When a XDP program is installed or uninstalled, fec_restart() will
be invoked to reset MAC and buffer descriptor rings. It's reasonable
not to transmit any packet during the process of reset. However, the
NETDEV_XDP_ACT_NDO_XMIT bit of xdp_features is enabled by default,
that is to say, it's possible that the fec_enet_xdp_xmit() will be
invoked even if the process of reset is not finished. In this case,
the redirected XDP frames might be dropped and available transmit BDs
may be incorrectly deemed insufficient. So this patch disable the
NETDEV_XDP_ACT_NDO_XMIT feature by default and dynamically configure
this feature when the bpf program is installed or uninstalled.
Fixes:
e4ac7cc6e5a4 ("net: fec: turn on XDP features")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Junfeng Guo [Sat, 8 Jul 2023 03:14:51 +0000 (11:14 +0800)]
gve: unify driver name usage
Current codebase contained the usage of two different names for this
driver (i.e., `gvnic` and `gve`), which is quite unfriendly for users
to use, especially when trying to bind or unbind the driver manually.
The corresponding kernel module is registered with the name of `gve`.
It's more reasonable to align the name of the driver with the module.
Fixes:
893ce44df565 ("gve: Add basic driver framework for Compute Engine Virtual NIC")
Cc: csully@google.com
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Azeem Shaikh [Mon, 10 Jul 2023 03:07:11 +0000 (03:07 +0000)]
net: sched: Replace strlcpy with strscpy
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
Direct replacement is safe here since return value of -errno
is used to check for truncation instead of sizeof(dest).
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiasheng Jiang [Mon, 10 Jul 2023 01:39:07 +0000 (09:39 +0800)]
net: dsa: qca8k: Add check for skb_copy
Add check for the return value of skb_copy in order to avoid NULL pointer
dereference.
Fixes:
2cd548566384 ("net: dsa: qca8k: add support for phy read/write with mgmt Ethernet")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simon Horman [Sat, 8 Jul 2023 14:06:25 +0000 (15:06 +0100)]
net: lan743x: select FIXED_PHY
The blamed commit introduces usage of fixed_phy_register() but
not a corresponding dependency on FIXED_PHY.
This can result in a build failure.
s390-linux-ld: drivers/net/ethernet/microchip/lan743x_main.o: in function `lan743x_phy_open':
drivers/net/ethernet/microchip/lan743x_main.c:1514: undefined reference to `fixed_phy_register'
Fixes:
624864fbff92 ("net: lan743x: add fixed phy support for LAN7431 device")
Cc: stable@vger.kernel.org
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/netdev/
725bf1c5-b252-7d19-7582-
a6809716c7d6@infradead.org/
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ziyang Xuan [Sat, 8 Jul 2023 06:59:10 +0000 (14:59 +0800)]
ipv6/addrconf: fix a potential refcount underflow for idev
Now in addrconf_mod_rs_timer(), reference idev depends on whether
rs_timer is not pending. Then modify rs_timer timeout.
There is a time gap in [1], during which if the pending rs_timer
becomes not pending. It will miss to hold idev, but the rs_timer
is activated. Thus rs_timer callback function addrconf_rs_timer()
will be executed and put idev later without holding idev. A refcount
underflow issue for idev can be caused by this.
if (!timer_pending(&idev->rs_timer))
in6_dev_hold(idev);
<--------------[1]
mod_timer(&idev->rs_timer, jiffies + when);
To fix the issue, hold idev if mod_timer() return 0.
Fixes:
b7b1bfce0bb6 ("ipv6: split duplicate address detection and router solicitation timer")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Sat, 8 Jul 2023 08:29:58 +0000 (08:29 +0000)]
udp6: fix udp6_ehashfn() typo
Amit Klein reported that udp6_ehash_secret was initialized but never used.
Fixes:
1bbdceef1e53 ("inet: convert inet_ehash_secret and ipv6_hash_secret to net_get_random_once")
Reported-by: Amit Klein <aksecurity@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Cc: David Ahern <dsahern@kernel.org>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kuniyuki Iwashima [Sat, 8 Jul 2023 01:43:27 +0000 (18:43 -0700)]
icmp6: Fix null-ptr-deref of ip6_null_entry->rt6i_idev in icmp6_dev().
With some IPv6 Ext Hdr (RPL, SRv6, etc.), we can send a packet that
has the link-local address as src and dst IP and will be forwarded to
an external IP in the IPv6 Ext Hdr.
For example, the script below generates a packet whose src IP is the
link-local address and dst is updated to 11::.
# for f in $(find /proc/sys/net/ -name *seg6_enabled*); do echo 1 > $f; done
# python3
>>> from socket import *
>>> from scapy.all import *
>>>
>>> SRC_ADDR = DST_ADDR = "fe80::5054:ff:fe12:3456"
>>>
>>> pkt = IPv6(src=SRC_ADDR, dst=DST_ADDR)
>>> pkt /= IPv6ExtHdrSegmentRouting(type=4, addresses=["11::", "22::"], segleft=1)
>>>
>>> sk = socket(AF_INET6, SOCK_RAW, IPPROTO_RAW)
>>> sk.sendto(bytes(pkt), (DST_ADDR, 0))
For such a packet, we call ip6_route_input() to look up a route for the
next destination in these three functions depending on the header type.
* ipv6_rthdr_rcv()
* ipv6_rpl_srh_rcv()
* ipv6_srh_rcv()
If no route is found, ip6_null_entry is set to skb, and the following
dst_input(skb) calls ip6_pkt_drop().
Finally, in icmp6_dev(), we dereference skb_rt6_info(skb)->rt6i_idev->dev
as the input device is the loopback interface. Then, we have to check if
skb_rt6_info(skb)->rt6i_idev is NULL or not to avoid NULL pointer deref
for ip6_null_entry.
BUG: kernel NULL pointer dereference, address:
0000000000000000
PF: supervisor read access in kernel mode
PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 0 PID: 157 Comm: python3 Not tainted
6.4.0-11996-gb121d614371c #35
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:icmp6_send (net/ipv6/icmp.c:436 net/ipv6/icmp.c:503)
Code: fe ff ff 48 c7 40 30 c0 86 5d 83 e8 c6 44 1c 00 e9 c8 fc ff ff 49 8b 46 58 48 83 e0 fe 0f 84 4a fb ff ff 48 8b 80 d0 00 00 00 <48> 8b 00 44 8b 88 e0 00 00 00 e9 34 fb ff ff 4d 85 ed 0f 85 69 01
RSP: 0018:
ffffc90000003c70 EFLAGS:
00000286
RAX:
0000000000000000 RBX:
0000000000000001 RCX:
00000000000000e0
RDX:
0000000000000021 RSI:
0000000000000000 RDI:
ffff888006d72a18
RBP:
ffffc90000003d80 R08:
0000000000000000 R09:
0000000000000001
R10:
ffffc90000003d98 R11:
0000000000000040 R12:
ffff888006d72a10
R13:
0000000000000000 R14:
ffff8880057fb800 R15:
ffffffff835d86c0
FS:
00007f9dc72ee740(0000) GS:
ffff88807dc00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000000000000 CR3:
00000000057b2000 CR4:
00000000007506f0
PKRU:
55555554
Call Trace:
<IRQ>
ip6_pkt_drop (net/ipv6/route.c:4513)
ipv6_rthdr_rcv (net/ipv6/exthdrs.c:640 net/ipv6/exthdrs.c:686)
ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:437 (discriminator 5))
ip6_input_finish (./include/linux/rcupdate.h:781 net/ipv6/ip6_input.c:483)
__netif_receive_skb_one_core (net/core/dev.c:5455)
process_backlog (./include/linux/rcupdate.h:781 net/core/dev.c:5895)
__napi_poll (net/core/dev.c:6460)
net_rx_action (net/core/dev.c:6529 net/core/dev.c:6660)
__do_softirq (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/irq.h:142 kernel/softirq.c:554)
do_softirq (kernel/softirq.c:454 kernel/softirq.c:441)
</IRQ>
<TASK>
__local_bh_enable_ip (kernel/softirq.c:381)
__dev_queue_xmit (net/core/dev.c:4231)
ip6_finish_output2 (./include/net/neighbour.h:544 net/ipv6/ip6_output.c:135)
rawv6_sendmsg (./include/net/dst.h:458 ./include/linux/netfilter.h:303 net/ipv6/raw.c:656 net/ipv6/raw.c:914)
sock_sendmsg (net/socket.c:725 net/socket.c:748)
__sys_sendto (net/socket.c:2134)
__x64_sys_sendto (net/socket.c:2146 net/socket.c:2142 net/socket.c:2142)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
RIP: 0033:0x7f9dc751baea
Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89
RSP: 002b:
00007ffe98712c38 EFLAGS:
00000246 ORIG_RAX:
000000000000002c
RAX:
ffffffffffffffda RBX:
00007ffe98712cf8 RCX:
00007f9dc751baea
RDX:
0000000000000060 RSI:
00007f9dc6460b90 RDI:
0000000000000003
RBP:
00007f9dc56e8be0 R08:
00007ffe98712d70 R09:
000000000000001c
R10:
0000000000000000 R11:
0000000000000246 R12:
0000000000000000
R13:
ffffffffc4653600 R14:
0000000000000001 R15:
00007f9dc6af5d1b
</TASK>
Modules linked in:
CR2:
0000000000000000
---[ end trace
0000000000000000 ]---
RIP: 0010:icmp6_send (net/ipv6/icmp.c:436 net/ipv6/icmp.c:503)
Code: fe ff ff 48 c7 40 30 c0 86 5d 83 e8 c6 44 1c 00 e9 c8 fc ff ff 49 8b 46 58 48 83 e0 fe 0f 84 4a fb ff ff 48 8b 80 d0 00 00 00 <48> 8b 00 44 8b 88 e0 00 00 00 e9 34 fb ff ff 4d 85 ed 0f 85 69 01
RSP: 0018:
ffffc90000003c70 EFLAGS:
00000286
RAX:
0000000000000000 RBX:
0000000000000001 RCX:
00000000000000e0
RDX:
0000000000000021 RSI:
0000000000000000 RDI:
ffff888006d72a18
RBP:
ffffc90000003d80 R08:
0000000000000000 R09:
0000000000000001
R10:
ffffc90000003d98 R11:
0000000000000040 R12:
ffff888006d72a10
R13:
0000000000000000 R14:
ffff8880057fb800 R15:
ffffffff835d86c0
FS:
00007f9dc72ee740(0000) GS:
ffff88807dc00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000000000000 CR3:
00000000057b2000 CR4:
00000000007506f0
PKRU:
55555554
Kernel panic - not syncing: Fatal exception in interrupt
Kernel Offset: disabled
Fixes:
4832c30d5458 ("net: ipv6: put host and anycast routes on device with address")
Reported-by: Wang Yufen <wangyufen@huawei.com>
Closes: https://lore.kernel.org/netdev/
c41403a9-c2f6-3b7e-0c96-
e1901e605cd0@huawei.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 8 Jul 2023 09:07:14 +0000 (10:07 +0100)]
Merge branch 's390-ism-fixes'
Niklas Schnelle says:
====================
s390/ism: Fixes to client handling
This is v2 of the patch previously titled "s390/ism: Detangle ISM client
IRQ and event forwarding". As suggested by Paolo Abeni I split the patch
up. While doing so I noticed another problem that was fixed by this patch
concerning the way the workqueues access the client structs. This means the
second patch turning the workqueues into simple direct calls also fixes
a problem. Finally I split off a third patch just for fixing
ism_unregister_client()s error path.
The code after these 3 patches is identical to the result of the v1 patch
except that I also turned the dev_err() for still registered DMBs into
a WARN().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Niklas Schnelle [Fri, 7 Jul 2023 10:56:22 +0000 (12:56 +0200)]
s390/ism: Do not unregister clients with registered DMBs
When ism_unregister_client() is called but the client still has DMBs
registered it returns -EBUSY and prints an error. This only happens
after the client has already been unregistered however. This is
unexpected as the unregister claims to have failed. Furthermore as this
implies a client bug a WARN() is more appropriate. Thus move the
deregistration after the check and use WARN().
Fixes:
89e7d2ba61b7 ("net/ism: Add new API for client registration")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Niklas Schnelle [Fri, 7 Jul 2023 10:56:21 +0000 (12:56 +0200)]
s390/ism: Fix and simplify add()/remove() callback handling
Previously the clients_lock was protecting the clients array against
concurrent addition/removal of clients but was also accessed from IRQ
context. This meant that it had to be a spinlock and that the add() and
remove() callbacks in which clients need to do allocation and take
mutexes can't be called under the clients_lock. To work around this these
callbacks were moved to workqueues. This not only introduced significant
complexity but is also subtly broken in at least one way.
In ism_dev_init() and ism_dev_exit() clients[i]->tgt_ism is used to
communicate the added/removed ISM device to the work function. While
write access to client[i]->tgt_ism is protected by the clients_lock and
the code waits that there is no pending add/remove work before and after
setting clients[i]->tgt_ism this is not enough. The problem is that the
wait happens based on per ISM device counters. Thus a concurrent
ism_dev_init()/ism_dev_exit() for a different ISM device may overwrite
a clients[i]->tgt_ism between unlocking the clients_lock and the
subsequent wait for the work to finnish.
Thankfully with the clients_lock no longer held in IRQ context it can be
turned into a mutex which can be held during the calls to add()/remove()
completely removing the need for the workqueues and the associated
broken housekeeping including the per ISM device counters and the
clients[i]->tgt_ism.
Fixes:
89e7d2ba61b7 ("net/ism: Add new API for client registration")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Niklas Schnelle [Fri, 7 Jul 2023 10:56:20 +0000 (12:56 +0200)]
s390/ism: Fix locking for forwarding of IRQs and events to clients
The clients array references all registered clients and is protected by
the clients_lock. Besides its use as general list of clients the clients
array is accessed in ism_handle_irq() to forward ISM device events to
clients.
While the clients_lock is taken in the IRQ handler when calling
handle_event() it is however incorrectly not held during the
client->handle_irq() call and for the preceding clients[] access leaving
it unprotected against concurrent client (un-)registration.
Furthermore the accesses to ism->sba_client_arr[] in ism_register_dmb()
and ism_unregister_dmb() are not protected by any lock. This is
especially problematic as the client ID from the ism->sba_client_arr[]
is not checked against NO_CLIENT and neither is the client pointer
checked.
Instead of expanding the use of the clients_lock further add a separate
array in struct ism_dev which references clients subscribed to the
device's events and IRQs. This array is protected by ism->lock which is
already taken in ism_handle_irq() and can be taken outside the IRQ
handler when adding/removing subscribers or the accessing
ism->sba_client_arr[]. This also means that the clients_lock is no
longer taken in IRQ context.
Fixes:
89e7d2ba61b7 ("net/ism: Add new API for client registration")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Fri, 7 Jul 2023 08:11:10 +0000 (10:11 +0200)]
net: prevent skb corruption on frag list segmentation
Ian reported several skb corruptions triggered by rx-gro-list,
collecting different oops alike:
[ 62.624003] BUG: kernel NULL pointer dereference, address:
00000000000000c0
[ 62.631083] #PF: supervisor read access in kernel mode
[ 62.636312] #PF: error_code(0x0000) - not-present page
[ 62.641541] PGD 0 P4D 0
[ 62.644174] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 62.648629] CPU: 1 PID: 913 Comm: napi/eno2-79 Not tainted 6.4.0 #364
[ 62.655162] Hardware name: Supermicro Super Server/A2SDi-12C-HLN4F, BIOS 1.7a 10/13/2022
[ 62.663344] RIP: 0010:__udp_gso_segment (./include/linux/skbuff.h:2858
./include/linux/udp.h:23 net/ipv4/udp_offload.c:228 net/ipv4/udp_offload.c:261
net/ipv4/udp_offload.c:277)
[ 62.687193] RSP: 0018:
ffffbd3a83b4f868 EFLAGS:
00010246
[ 62.692515] RAX:
00000000000000ce RBX:
0000000000000000 RCX:
0000000000000000
[ 62.699743] RDX:
ffffa124def8a000 RSI:
0000000000000079 RDI:
ffffa125952a14d4
[ 62.706970] RBP:
ffffa124def8a000 R08:
0000000000000022 R09:
00002000001558c9
[ 62.714199] R10:
0000000000000000 R11:
00000000be554639 R12:
00000000000000e2
[ 62.721426] R13:
ffffa125952a1400 R14:
ffffa125952a1400 R15:
00002000001558c9
[ 62.728654] FS:
0000000000000000(0000) GS:
ffffa127efa40000(0000)
knlGS:
0000000000000000
[ 62.736852] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 62.742702] CR2:
00000000000000c0 CR3:
00000001034b0000 CR4:
00000000003526e0
[ 62.749948] Call Trace:
[ 62.752498] <TASK>
[ 62.779267] inet_gso_segment (net/ipv4/af_inet.c:1398)
[ 62.787605] skb_mac_gso_segment (net/core/gro.c:141)
[ 62.791906] __skb_gso_segment (net/core/dev.c:3403 (discriminator 2))
[ 62.800492] validate_xmit_skb (./include/linux/netdevice.h:4862
net/core/dev.c:3659)
[ 62.804695] validate_xmit_skb_list (net/core/dev.c:3710)
[ 62.809158] sch_direct_xmit (net/sched/sch_generic.c:330)
[ 62.813198] __dev_queue_xmit (net/core/dev.c:3805 net/core/dev.c:4210)
net/netfilter/core.c:626)
[ 62.821093] br_dev_queue_push_xmit (net/bridge/br_forward.c:55)
[ 62.825652] maybe_deliver (net/bridge/br_forward.c:193)
[ 62.829420] br_flood (net/bridge/br_forward.c:233)
[ 62.832758] br_handle_frame_finish (net/bridge/br_input.c:215)
[ 62.837403] br_handle_frame (net/bridge/br_input.c:298
net/bridge/br_input.c:416)
[ 62.851417] __netif_receive_skb_core.constprop.0 (net/core/dev.c:5387)
[ 62.866114] __netif_receive_skb_list_core (net/core/dev.c:5570)
[ 62.871367] netif_receive_skb_list_internal (net/core/dev.c:5638
net/core/dev.c:5727)
[ 62.876795] napi_complete_done (./include/linux/list.h:37
./include/net/gro.h:434 ./include/net/gro.h:429 net/core/dev.c:6067)
[ 62.881004] ixgbe_poll (drivers/net/ethernet/intel/ixgbe/ixgbe_main.c:3191)
[ 62.893534] __napi_poll (net/core/dev.c:6498)
[ 62.897133] napi_threaded_poll (./include/linux/netpoll.h:89
net/core/dev.c:6640)
[ 62.905276] kthread (kernel/kthread.c:379)
[ 62.913435] ret_from_fork (arch/x86/entry/entry_64.S:314)
[ 62.917119] </TASK>
In the critical scenario, rx-gro-list GRO-ed packets are fed, via a
bridge, both to the local input path and to an egress device (tun).
The segmentation of such packets unsafely writes to the cloned skbs
with shared heads.
This change addresses the issue by uncloning as needed the
to-be-segmented skbs.
Reported-by: Ian Kumlien <ian.kumlien@gmail.com>
Tested-by: Ian Kumlien <ian.kumlien@gmail.com>
Fixes:
3a1296a38d0c ("net: Support GRO/GSO fraglist chaining.")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rafał Miłecki [Fri, 7 Jul 2023 06:53:25 +0000 (08:53 +0200)]
net: bgmac: postpone turning IRQs off to avoid SoC hangs
Turning IRQs off is done by accessing Ethernet controller registers.
That can't be done until device's clock is enabled. It results in a SoC
hang otherwise.
This bug remained unnoticed for years as most bootloaders keep all
Ethernet interfaces turned on. It seems to only affect a niche SoC
family BCM47189. It has two Ethernet controllers but CFE bootloader uses
only the first one.
Fixes:
34322615cbaa ("net: bgmac: Mask interrupts during probe")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Babrou [Fri, 7 Jul 2023 04:39:20 +0000 (21:39 -0700)]
udp6: add a missing call into udp_fail_queue_rcv_skb tracepoint
The tracepoint has existed for 12 years, but it only covered udp
over the legacy IPv4 protocol. Having it enabled for udp6 removes
the unnecessary difference in error visibility.
Signed-off-by: Ivan Babrou <ivan@cloudflare.com>
Fixes:
296f7ea75b45 ("udp: add tracepoints for queueing skb to rcvbuf")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Thu, 6 Jul 2023 20:59:24 +0000 (13:59 -0700)]
ionic: remove dead device fail path
Remove the probe error path code that leaves the driver bound
to the device, but with essentially a dead device. This was
useful maybe twice early in the driver's life and no longer
makes sense to keep.
Fixes:
30a1e6d0f8e2 ("ionic: keep ionic dev on lif init fail")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nitya Sunkad [Thu, 6 Jul 2023 18:20:06 +0000 (11:20 -0700)]
ionic: remove WARN_ON to prevent panic_on_warn
Remove unnecessary early code development check and the WARN_ON
that it uses. The irq alloc and free paths have long been
cleaned up and this check shouldn't have stuck around so long.
Fixes:
77ceb68e29cc ("ionic: Add notifyq support")
Signed-off-by: Nitya Sunkad <nitya.sunkad@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sai Krishna [Thu, 6 Jul 2023 08:29:36 +0000 (13:59 +0530)]
octeontx2-af: Move validation of ptp pointer before its usage
Moved PTP pointer validation before its use to avoid smatch warning.
Also used kzalloc/kfree instead of devm_kzalloc/devm_kfree.
Fixes:
2ef4e45d99b1 ("octeontx2-af: Add PTP PPS Errata workaround on CN10K silicon")
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ratheesh Kannoth [Thu, 6 Jul 2023 04:27:05 +0000 (09:57 +0530)]
octeontx2-af: Promisc enable/disable through mbox
In legacy silicon, promiscuous mode is only modified
through CGX mbox messages. In CN10KB silicon, it is modified
from CGX mbox and NIX. This breaks legacy application
behaviour. Fix this by removing call from NIX.
Fixes:
d6c9784baf59 ("octeontx2-af: Invoke exact match functions if supported")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 7 Jul 2023 07:56:12 +0000 (08:56 +0100)]
Merge branch '1GbE' of git://git./linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-07-05 (igc)
This series contains updates to igc driver only.
Husaini adds check to increment Qbv change error counter only on taprio
Qbvs. He also removes delay during Tx ring configuration and
resolves Tx hang that could occur when transmitting on a gate to be
closed.
Prasad Koya reports ethtool link mode as TP (twisted pair).
Tee Min corrects value for max SDU.
Aravindhan ensures that registers for PPS are always programmed to occur
in future.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Junfeng Guo [Thu, 6 Jul 2023 04:41:28 +0000 (12:41 +0800)]
gve: Set default duplex configuration to full
Current duplex mode was unset in the driver, resulting in the default
parameter being set to 0, which corresponds to half duplex. It might
mislead users to have incorrect expectation about the driver's
transmission capabilities.
Set the default duplex configuration to full, as the driver runs in
full duplex mode at this point.
Fixes:
7e074d5a76ca ("gve: Enable Link Speed Reporting in the driver.")
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Message-ID: <
20230706044128.
2726747-1-junfeng.guo@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 7 Jul 2023 02:14:16 +0000 (19:14 -0700)]
Merge branch '100GbE' of git://git./linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-07-05 (ice)
This series contains updates to ice driver only.
Sridhar fixes incorrect comparison of max Tx rate limit to occur against
each TC value rather than the aggregate. He also resolves an issue with
the wrong VSI being used when setting max Tx rate when TCs are enabled.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: Fix tx queue rate limit when TCs are configured
ice: Fix max_rate check while configuring TX rate limits
====================
Link: https://lore.kernel.org/r/20230705201346.49370-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 7 Jul 2023 02:11:20 +0000 (19:11 -0700)]
Merge tag 'mlx5-fixes-2023-07-05' of git://git./linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2023-07-05
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2023-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: RX, Fix page_pool page fragment tracking for XDP
net/mlx5: Query hca_cap_2 only when supported
net/mlx5e: TC, CT: Offload ct clear only once
net/mlx5e: Check for NOT_READY flag state after locking
net/mlx5: Register a unique thermal zone per device
net/mlx5e: RX, Fix flush and close release flow of regular rq for legacy rq
net/mlx5e: fix memory leak in mlx5e_ptp_open
net/mlx5e: fix memory leak in mlx5e_fs_tt_redirect_any_create
net/mlx5e: fix double free in mlx5e_destroy_flow_table
====================
Link: https://lore.kernel.org/r/20230705175757.284614-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
M A Ramdhan [Wed, 5 Jul 2023 16:15:30 +0000 (12:15 -0400)]
net/sched: cls_fw: Fix improper refcount update leads to use-after-free
In the event of a failure in tcf_change_indev(), fw_set_parms() will
immediately return an error after incrementing or decrementing
reference counter in tcf_bind_filter(). If attacker can control
reference counter to zero and make reference freed, leading to
use after free.
In order to prevent this, move the point of possible failure above the
point where the TC_FW_CLASSID is handled.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: M A Ramdhan <ramdhan@starlabs.sg>
Signed-off-by: M A Ramdhan <ramdhan@starlabs.sg>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Message-ID: <
20230705161530.52003-1-ramdhan@starlabs.sg>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Quan Zhou [Wed, 5 Jul 2023 15:26:38 +0000 (23:26 +0800)]
wifi: mt76: mt7921e: fix init command fail with enabled device
For some cases as below, we may encounter the unpreditable chip stats
in driver probe()
* The system reboot flow do not work properly, such as kernel oops while
rebooting, and then the driver do not go back to default status at
this moment.
* Similar to the flow above. If the device was enabled in BIOS or UEFI,
the system may switch to Linux without driver fully shutdown.
To avoid the problem, force push the device back to default in probe()
* mt7921e_mcu_fw_pmctrl() : return control privilege to chip side.
* mt7921_wfsys_reset() : cleanup chip config before resource init.
Error log
[59007.600714] mt7921e 0000:02:00.0: ASIC revision:
79220010
[59010.889773] mt7921e 0000:02:00.0: Message
00000010 (seq 1) timeout
[59010.889786] mt7921e 0000:02:00.0: Failed to get patch semaphore
[59014.217839] mt7921e 0000:02:00.0: Message
00000010 (seq 2) timeout
[59014.217852] mt7921e 0000:02:00.0: Failed to get patch semaphore
[59017.545880] mt7921e 0000:02:00.0: Message
00000010 (seq 3) timeout
[59017.545893] mt7921e 0000:02:00.0: Failed to get patch semaphore
[59020.874086] mt7921e 0000:02:00.0: Message
00000010 (seq 4) timeout
[59020.874099] mt7921e 0000:02:00.0: Failed to get patch semaphore
[59024.202019] mt7921e 0000:02:00.0: Message
00000010 (seq 5) timeout
[59024.202033] mt7921e 0000:02:00.0: Failed to get patch semaphore
[59027.530082] mt7921e 0000:02:00.0: Message
00000010 (seq 6) timeout
[59027.530096] mt7921e 0000:02:00.0: Failed to get patch semaphore
[59030.857888] mt7921e 0000:02:00.0: Message
00000010 (seq 7) timeout
[59030.857904] mt7921e 0000:02:00.0: Failed to get patch semaphore
[59034.185946] mt7921e 0000:02:00.0: Message
00000010 (seq 8) timeout
[59034.185961] mt7921e 0000:02:00.0: Failed to get patch semaphore
[59037.514249] mt7921e 0000:02:00.0: Message
00000010 (seq 9) timeout
[59037.514262] mt7921e 0000:02:00.0: Failed to get patch semaphore
[59040.842362] mt7921e 0000:02:00.0: Message
00000010 (seq 10) timeout
[59040.842375] mt7921e 0000:02:00.0: Failed to get patch semaphore
[59040.923845] mt7921e 0000:02:00.0: hardware init failed
Cc: stable@vger.kernel.org
Fixes:
5c14a5f944b9 ("mt76: mt7921: introduce mt7921e support")
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Juan Martinez <juan.martinez@amd.com>
Co-developed-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Message-ID: <
39fcb7cee08d4ab940d38d82f21897483212483f.
1688569385.git.deren.wu@mediatek.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 7 Jul 2023 02:10:25 +0000 (19:10 -0700)]
Merge branch 'fix-dropping-of-oversize-preemptible-frames-with-felix-dsa-driver'
Vladimir Oltean says:
====================
Fix dropping of oversize preemptible frames with felix DSA driver
It has been reported that preemptible traffic doesn't completely behave
as expected. Namely, large packets should be able to be squeezed
(through fragmentation) through taprio time slots smaller than the
transmission time of the full frame. That does not happen due to logic
in the driver (for oversize frame dropping with taprio) that was not
updated in order for this use case to work.
I am not sure whether it qualifies as "net" material, because some
structural changes are involved, and it is a "never worked" scenario.
OTOH, this is a complaint coming from users for a v6.4 kernel.
It's up to maintainers to decide whether this series can be considered;
I've submitted it as non-RFC in the optimistic case that it will be :)
Demo script illustrating the issue below.
add_taprio()
{
local ifname=$1
echo "Creating root taprio"
tc qdisc replace dev $ifname handle 8001: parent root stab overhead 24 taprio \
num_tc 8 \
map 0 1 2 3 4 5 6 7 \
queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \
base-time 0 \
sched-entry S 01 1216 \
sched-entry S fe 12368 \
fp P E E E E E E E \
flags 0x2
}
remove_taprio()
{
local ifname=$1
echo "Removing taprio"
tc qdisc del dev $ifname root
}
ip netns add ns0
ip link set eno0 netns ns0 && ip -n ns0 link set eno0 up && ip -n ns0 addr add 192.168.100.1/24 dev eno0
ip addr add 192.168.100.2/24 dev swp0 && ip link set swp0 up
ip netns exec ns0 ethtool --set-mm eno0 pmac-enabled on verify-enabled off tx-enabled on
ethtool --set-mm swp0 pmac-enabled on verify-enabled off tx-enabled on
add_taprio swp0
ping 192.168.100.1 -s 1000 -c 5 # sent through TC0
ethtool -I --show-mm swp0 | grep MACMergeFragCountTx # should increase
ip addr flush swp0 && ip link set swp0 down
remove_taprio swp0
ethtool --set-mm swp0 pmac-enabled off verify-enabled off tx-enabled off
ip netns exec ns0 ethtool --set-mm eno0 pmac-enabled off verify-enabled off tx-enabled off
ip netns del ns0
====================
Link: https://lore.kernel.org/r/20230705104422.49025-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Wed, 5 Jul 2023 10:44:22 +0000 (13:44 +0300)]
net: mscc: ocelot: fix oversize frame dropping for preemptible TCs
This switch implements Hold/Release in a strange way, with no control
from the user as required by IEEE 802.1Q-2018 through Set-And-Hold-MAC
and Set-And-Release-MAC, but rather, it emits HOLD requests implicitly
based on the schedule.
Namely, when the gate of a preemptible TC is about to close (actually
QSYS::PREEMPTION_CFG.HOLD_ADVANCE octet times in advance of this event),
the QSYS seems to emit a HOLD request pulse towards the MAC which
preempts the currently transmitted packet, and further packets are held
back in the queue system.
This allows large frames to be squeezed through small time slots,
because HOLD requests initiated by the gate events result in the frame
being segmented in multiple fragments, the bit time of which is equal to
the size of the time slot.
It has been reported that the vsc9959_tas_guard_bands_update() logic
breaks this, because it doesn't take preemptible TCs into account, and
enables oversized frame dropping when the time slot doesn't allow a full
MTU to be sent, but it does allow 2*minFragSize to be sent (128B).
Packets larger than 128B are dropped instead of being sent in multiple
fragments.
Confusingly, the manual says:
| For guard band, SDU calculation of a traffic class of a port, if
| preemption is enabled (through 'QSYS::PREEMPTION_CFG.P_QUEUES') then
| QSYS::PREEMPTION_CFG.HOLD_ADVANCE is used, otherwise
| QSYS::QMAXSDU_CFG_*.QMAXSDU_* is used.
but this only refers to the static guard band durations, and the
QMAXSDU_CFG_* registers have dual purpose - the other being oversized
frame dropping, which takes place irrespective of whether frames are
preemptible or express.
So, to fix the problem, we need to call vsc9959_tas_guard_bands_update()
from ocelot_port_update_active_preemptible_tcs(), and modify the guard
band logic to consider a different (lower) oversize limit for
preemptible traffic classes.
Fixes:
403ffc2c34de ("net: mscc: ocelot: add support for preemptible traffic classes")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Message-ID: <
20230705104422.49025-4-vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Wed, 5 Jul 2023 10:44:21 +0000 (13:44 +0300)]
net: dsa: felix: make vsc9959_tas_guard_bands_update() visible to ocelot->ops
In a future change we will need to make
ocelot_port_update_active_preemptible_tcs() call
vsc9959_tas_guard_bands_update(), but that is currently not possible,
since the ocelot switch lib does not have access to functions private to
the DSA wrapper.
Move the pointer to vsc9959_tas_guard_bands_update() from felix->info
(which is private to the DSA driver) to ocelot->ops (which is also
visible to the ocelot switch lib).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Message-ID: <
20230705104422.49025-3-vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Wed, 5 Jul 2023 10:44:20 +0000 (13:44 +0300)]
net: mscc: ocelot: extend ocelot->fwd_domain_lock to cover ocelot->tas_lock
In a future commit we will have to call vsc9959_tas_guard_bands_update()
from ocelot_port_update_active_preemptible_tcs(), and that will be
impossible due to the AB/BA locking dependencies between
ocelot->tas_lock and ocelot->fwd_domain_lock.
Just like we did in commit
3ff468ef987e ("net: mscc: ocelot: remove
struct ocelot_mm_state :: lock"), the only solution is to expand the
scope of ocelot->fwd_domain_lock for it to also serialize changes made
to the Time-Aware Shaper, because those will have to result in a
recalculation of cut-through TCs, which is something that depends on the
forwarding domain.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Message-ID: <
20230705104422.49025-2-vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Thu, 6 Jul 2023 09:02:57 +0000 (11:02 +0200)]
Merge tag 'nf-23-07-06' of git://git./linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix missing overflow use refcount checks in nf_tables.
2) Do not set IPS_ASSURED for IPS_NAT_CLASH entries in GRE tracker,
from Florian Westphal.
3) Bail out if nf_ct_helper_hash is NULL before registering helper,
from Florent Revest.
4) Use siphash() instead siphash_4u64() to fix performance regression,
also from Florian.
5) Do not allow to add rules to removed chains via ID,
from Thadeu Lima de Souza Cascardo.
6) Fix oob read access in byteorder expression, also from Thadeu.
netfilter pull request 23-07-06
====================
Link: https://lore.kernel.org/r/20230705230406.52201-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Klaus Kudielka [Wed, 5 Jul 2023 05:37:12 +0000 (07:37 +0200)]
net: mvneta: fix txq_map in case of txq_number==1
If we boot with mvneta.txq_number=1, the txq_map is set incorrectly:
MVNETA_CPU_TXQ_ACCESS(1) refers to TX queue 1, but only TX queue 0 is
initialized. Fix this.
Fixes:
50bf8cb6fc9c ("net: mvneta: Configure XPS support")
Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://lore.kernel.org/r/20230705053712.3914-1-klaus.kudielka@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Thadeu Lima de Souza Cascardo [Wed, 5 Jul 2023 21:05:35 +0000 (18:05 -0300)]
netfilter: nf_tables: prevent OOB access in nft_byteorder_eval
When evaluating byteorder expressions with size 2, a union with 32-bit and
16-bit members is used. Since the 16-bit members are aligned to 32-bit,
the array accesses will be out-of-bounds.
It may lead to a stack-out-of-bounds access like the one below:
[ 23.095215] ==================================================================
[ 23.095625] BUG: KASAN: stack-out-of-bounds in nft_byteorder_eval+0x13c/0x320
[ 23.096020] Read of size 2 at addr
ffffc90000007948 by task ping/115
[ 23.096358]
[ 23.096456] CPU: 0 PID: 115 Comm: ping Not tainted 6.4.0+ #413
[ 23.096770] Call Trace:
[ 23.096910] <IRQ>
[ 23.097030] dump_stack_lvl+0x60/0xc0
[ 23.097218] print_report+0xcf/0x630
[ 23.097388] ? nft_byteorder_eval+0x13c/0x320
[ 23.097577] ? kasan_addr_to_slab+0xd/0xc0
[ 23.097760] ? nft_byteorder_eval+0x13c/0x320
[ 23.097949] kasan_report+0xc9/0x110
[ 23.098106] ? nft_byteorder_eval+0x13c/0x320
[ 23.098298] __asan_load2+0x83/0xd0
[ 23.098453] nft_byteorder_eval+0x13c/0x320
[ 23.098659] nft_do_chain+0x1c8/0xc50
[ 23.098852] ? __pfx_nft_do_chain+0x10/0x10
[ 23.099078] ? __kasan_check_read+0x11/0x20
[ 23.099295] ? __pfx___lock_acquire+0x10/0x10
[ 23.099535] ? __pfx___lock_acquire+0x10/0x10
[ 23.099745] ? __kasan_check_read+0x11/0x20
[ 23.099929] nft_do_chain_ipv4+0xfe/0x140
[ 23.100105] ? __pfx_nft_do_chain_ipv4+0x10/0x10
[ 23.100327] ? lock_release+0x204/0x400
[ 23.100515] ? nf_hook.constprop.0+0x340/0x550
[ 23.100779] nf_hook_slow+0x6c/0x100
[ 23.100977] ? __pfx_nft_do_chain_ipv4+0x10/0x10
[ 23.101223] nf_hook.constprop.0+0x334/0x550
[ 23.101443] ? __pfx_ip_local_deliver_finish+0x10/0x10
[ 23.101677] ? __pfx_nf_hook.constprop.0+0x10/0x10
[ 23.101882] ? __pfx_ip_rcv_finish+0x10/0x10
[ 23.102071] ? __pfx_ip_local_deliver_finish+0x10/0x10
[ 23.102291] ? rcu_read_lock_held+0x4b/0x70
[ 23.102481] ip_local_deliver+0xbb/0x110
[ 23.102665] ? __pfx_ip_rcv+0x10/0x10
[ 23.102839] ip_rcv+0x199/0x2a0
[ 23.102980] ? __pfx_ip_rcv+0x10/0x10
[ 23.103140] __netif_receive_skb_one_core+0x13e/0x150
[ 23.103362] ? __pfx___netif_receive_skb_one_core+0x10/0x10
[ 23.103647] ? mark_held_locks+0x48/0xa0
[ 23.103819] ? process_backlog+0x36c/0x380
[ 23.103999] __netif_receive_skb+0x23/0xc0
[ 23.104179] process_backlog+0x91/0x380
[ 23.104350] __napi_poll.constprop.0+0x66/0x360
[ 23.104589] ? net_rx_action+0x1cb/0x610
[ 23.104811] net_rx_action+0x33e/0x610
[ 23.105024] ? _raw_spin_unlock+0x23/0x50
[ 23.105257] ? __pfx_net_rx_action+0x10/0x10
[ 23.105485] ? mark_held_locks+0x48/0xa0
[ 23.105741] __do_softirq+0xfa/0x5ab
[ 23.105956] ? __dev_queue_xmit+0x765/0x1c00
[ 23.106193] do_softirq.part.0+0x49/0xc0
[ 23.106423] </IRQ>
[ 23.106547] <TASK>
[ 23.106670] __local_bh_enable_ip+0xf5/0x120
[ 23.106903] __dev_queue_xmit+0x789/0x1c00
[ 23.107131] ? __pfx___dev_queue_xmit+0x10/0x10
[ 23.107381] ? find_held_lock+0x8e/0xb0
[ 23.107585] ? lock_release+0x204/0x400
[ 23.107798] ? neigh_resolve_output+0x185/0x350
[ 23.108049] ? mark_held_locks+0x48/0xa0
[ 23.108265] ? neigh_resolve_output+0x185/0x350
[ 23.108514] neigh_resolve_output+0x246/0x350
[ 23.108753] ? neigh_resolve_output+0x246/0x350
[ 23.109003] ip_finish_output2+0x3c3/0x10b0
[ 23.109250] ? __pfx_ip_finish_output2+0x10/0x10
[ 23.109510] ? __pfx_nf_hook+0x10/0x10
[ 23.109732] __ip_finish_output+0x217/0x390
[ 23.109978] ip_finish_output+0x2f/0x130
[ 23.110207] ip_output+0xc9/0x170
[ 23.110404] ip_push_pending_frames+0x1a0/0x240
[ 23.110652] raw_sendmsg+0x102e/0x19e0
[ 23.110871] ? __pfx_raw_sendmsg+0x10/0x10
[ 23.111093] ? lock_release+0x204/0x400
[ 23.111304] ? __mod_lruvec_page_state+0x148/0x330
[ 23.111567] ? find_held_lock+0x8e/0xb0
[ 23.111777] ? find_held_lock+0x8e/0xb0
[ 23.111993] ? __rcu_read_unlock+0x7c/0x2f0
[ 23.112225] ? aa_sk_perm+0x18a/0x550
[ 23.112431] ? filemap_map_pages+0x4f1/0x900
[ 23.112665] ? __pfx_aa_sk_perm+0x10/0x10
[ 23.112880] ? find_held_lock+0x8e/0xb0
[ 23.113098] inet_sendmsg+0xa0/0xb0
[ 23.113297] ? inet_sendmsg+0xa0/0xb0
[ 23.113500] ? __pfx_inet_sendmsg+0x10/0x10
[ 23.113727] sock_sendmsg+0xf4/0x100
[ 23.113924] ? move_addr_to_kernel.part.0+0x4f/0xa0
[ 23.114190] __sys_sendto+0x1d4/0x290
[ 23.114391] ? __pfx___sys_sendto+0x10/0x10
[ 23.114621] ? __pfx_mark_lock.part.0+0x10/0x10
[ 23.114869] ? lock_release+0x204/0x400
[ 23.115076] ? find_held_lock+0x8e/0xb0
[ 23.115287] ? rcu_is_watching+0x23/0x60
[ 23.115503] ? __rseq_handle_notify_resume+0x6e2/0x860
[ 23.115778] ? __kasan_check_write+0x14/0x30
[ 23.116008] ? blkcg_maybe_throttle_current+0x8d/0x770
[ 23.116285] ? mark_held_locks+0x28/0xa0
[ 23.116503] ? do_syscall_64+0x37/0x90
[ 23.116713] __x64_sys_sendto+0x7f/0xb0
[ 23.116924] do_syscall_64+0x59/0x90
[ 23.117123] ? irqentry_exit_to_user_mode+0x25/0x30
[ 23.117387] ? irqentry_exit+0x77/0xb0
[ 23.117593] ? exc_page_fault+0x92/0x140
[ 23.117806] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[ 23.118081] RIP: 0033:0x7f744aee2bba
[ 23.118282] Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89
[ 23.119237] RSP: 002b:
00007ffd04a7c9f8 EFLAGS:
00000246 ORIG_RAX:
000000000000002c
[ 23.119644] RAX:
ffffffffffffffda RBX:
00007ffd04a7e0a0 RCX:
00007f744aee2bba
[ 23.120023] RDX:
0000000000000040 RSI:
000056488e9e6300 RDI:
0000000000000003
[ 23.120413] RBP:
000056488e9e6300 R08:
00007ffd04a80320 R09:
0000000000000010
[ 23.120809] R10:
0000000000000000 R11:
0000000000000246 R12:
0000000000000040
[ 23.121219] R13:
00007ffd04a7dc38 R14:
00007ffd04a7ca00 R15:
00007ffd04a7e0a0
[ 23.121617] </TASK>
[ 23.121749]
[ 23.121845] The buggy address belongs to the virtual mapping at
[ 23.121845] [
ffffc90000000000,
ffffc90000009000) created by:
[ 23.121845] irq_init_percpu_irqstack+0x1cf/0x270
[ 23.122707]
[ 23.122803] The buggy address belongs to the physical page:
[ 23.123104] page:
0000000072ac19f0 refcount:1 mapcount:0 mapping:
0000000000000000 index:0x0 pfn:0x24a09
[ 23.123609] flags: 0xfffffc0001000(reserved|node=0|zone=1|lastcpupid=0x1fffff)
[ 23.123998] page_type: 0xffffffff()
[ 23.124194] raw:
000fffffc0001000 ffffea0000928248 ffffea0000928248 0000000000000000
[ 23.124610] raw:
0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
[ 23.125023] page dumped because: kasan: bad access detected
[ 23.125326]
[ 23.125421] Memory state around the buggy address:
[ 23.125682]
ffffc90000007800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 23.126072]
ffffc90000007880: 00 00 00 00 00 f1 f1 f1 f1 f1 f1 00 00 f2 f2 00
[ 23.126455] >
ffffc90000007900: 00 00 00 00 00 00 00 00 00 f2 f2 f2 f2 00 00 00
[ 23.126840] ^
[ 23.127138]
ffffc90000007980: 00 00 00 00 00 00 00 00 00 00 00 00 00 f3 f3 f3
[ 23.127522]
ffffc90000007a00: f3 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1
[ 23.127906] ==================================================================
[ 23.128324] Disabling lock debugging due to kernel taint
Using simple s16 pointers for the 16-bit accesses fixes the problem. For
the 32-bit accesses, src and dst can be used directly.
Fixes:
96518518cc41 ("netfilter: add nftables")
Cc: stable@vger.kernel.org
Reported-by: Tanguy DUBROCA (@SidewayRE) from @Synacktiv working with ZDI
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Linus Torvalds [Wed, 5 Jul 2023 22:44:45 +0000 (15:44 -0700)]
Merge tag 'net-6.5-rc1' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, bpf and wireguard.
Current release - regressions:
- nvme-tcp: fix comma-related oops after sendpage changes
Current release - new code bugs:
- ptp: make max_phase_adjustment sysfs device attribute invisible
when not supported
Previous releases - regressions:
- sctp: fix potential deadlock on &net->sctp.addr_wq_lock
- mptcp:
- ensure subflow is unhashed before cleaning the backlog
- do not rely on implicit state check in mptcp_listen()
Previous releases - always broken:
- net: fix net_dev_start_xmit trace event vs skb_transport_offset()
- Bluetooth:
- fix use-bdaddr-property quirk
- L2CAP: fix multiple UaFs
- ISO: use hci_sync for setting CIG parameters
- hci_event: fix Set CIG Parameters error status handling
- hci_event: fix parsing of CIS Established Event
- MGMT: fix marking SCAN_RSP as not connectable
- wireguard: queuing: use saner cpu selection wrapping
- sched: act_ipt: various bug fixes for iptables <> TC interactions
- sched: act_pedit: add size check for TCA_PEDIT_PARMS_EX
- dsa: fixes for receiving PTP packets with 8021q and sja1105 tagging
- eth: sfc: fix null-deref in devlink port without MAE access
- eth: ibmvnic: do not reset dql stats on NON_FATAL err
Misc:
- xsk: honor SO_BINDTODEVICE on bind"
* tag 'net-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits)
nfp: clean mc addresses in application firmware when closing port
selftests: mptcp: pm_nl_ctl: fix 32-bit support
selftests: mptcp: depend on SYN_COOKIES
selftests: mptcp: userspace_pm: report errors with 'remove' tests
selftests: mptcp: userspace_pm: use correct server port
selftests: mptcp: sockopt: return error if wrong mark
selftests: mptcp: sockopt: use 'iptables-legacy' if available
selftests: mptcp: connect: fail if nft supposed to work
mptcp: do not rely on implicit state check in mptcp_listen()
mptcp: ensure subflow is unhashed before cleaning the backlog
s390/qeth: Fix vipa deletion
octeontx-af: fix hardware timestamp configuration
net: dsa: sja1105: always enable the send_meta options
net: dsa: tag_sja1105: fix MAC DA patching from meta frames
net: Replace strlcpy with strscpy
pptp: Fix fib lookup calls.
mlxsw: spectrum_router: Fix an IS_ERR() vs NULL check
net/sched: act_pedit: Add size check for TCA_PEDIT_PARMS_EX
xsk: Honor SO_BINDTODEVICE on bind
ptp: Make max_phase_adjustment sysfs device attribute invisible when not supported
...
Linus Torvalds [Wed, 5 Jul 2023 21:14:37 +0000 (14:14 -0700)]
Merge tag 'f2fs-for-6.5-rc1' of git://git./linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this cycle, we've mainly investigated the zoned block device
support along with patches such as correcting write pointers between
f2fs and storage, adding asynchronous zone reset flow, and managing
the number of open zones.
Other than them, f2fs adds another mount option, "errors=x" to specify
how to handle when it detects an unexpected behavior at runtime.
Enhancements:
- support 'errors=remount-ro|continue|panic' mount option
- enforce some inode flag policies
- allow .tmp compression given extensions
- add some ioctls to manage the f2fs compression
- improve looped node chain flow
- avoid issuing small-sized discard commands during checkpoint
- implement an asynchronous zone reset
Bug fixes:
- fix deadlock in xattr and inode page lock
- fix and add sanity check in some error paths
- fix to avoid NULL pointer dereference f2fs_write_end_io() along
with put_super
- set proper flags to quota files
- fix potential deadlock due to unpaired node_write lock use
- fix over-estimating free section during FG GC
- fix the wrong condition to determine atomic context
As usual, also there are a number of patches with code refactoring and
minor clean-ups"
* tag 'f2fs-for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (46 commits)
f2fs: fix to do sanity check on direct node in truncate_dnode()
f2fs: only set release for file that has compressed data
f2fs: fix compile warning in f2fs_destroy_node_manager()
f2fs: fix error path handling in truncate_dnode()
f2fs: fix deadlock in i_xattr_sem and inode page lock
f2fs: remove unneeded page uptodate check/set
f2fs: update mtime and ctime in move file range method
f2fs: compress tmp files given extension
f2fs: refactor struct f2fs_attr macro
f2fs: convert to use sbi directly
f2fs: remove redundant assignment to variable err
f2fs: do not issue small discard commands during checkpoint
f2fs: check zone write pointer points to the end of zone
f2fs: add f2fs_ioc_get_compress_blocks
f2fs: cleanup MIN_INLINE_XATTR_SIZE
f2fs: add helper to check compression level
f2fs: set FMODE_CAN_ODIRECT instead of a dummy direct_IO method
f2fs: do more sanity check on inode
f2fs: compress: fix to check validity of i_compress_flag field
f2fs: add sanity compress level check for compressed file
...
Linus Torvalds [Wed, 5 Jul 2023 21:08:03 +0000 (14:08 -0700)]
Merge tag 'xfs-6.5-merge-5' of git://git./fs/xfs/xfs-linux
Pull more xfs updates from Darrick Wong:
- Fix some ordering problems with log items during log recovery
- Don't deadlock the system by trying to flush busy freed extents while
holding on to busy freed extents
- Improve validation of log geometry parameters when reading the
primary superblock
- Validate the length field in the AGF header
- Fix recordset filtering bugs when re-calling GETFSMAP to return more
results when the resultset didn't previously fit in the caller's
buffer
- Fix integer overflows in GETFSMAP when working with rt volumes larger
than 2^32 fsblocks
- Fix GETFSMAP reporting the undefined space beyond the last rtextent
- Fix filtering bugs in GETFSMAP's log device backend if the log ever
becomes longer than 2^32 fsblocks
- Improve validation of file offsets in the GETFSMAP range parameters
- Fix an off by one bug in the pmem media failure notification
computation
- Validate the length field in the AGI header too
* tag 'xfs-6.5-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: Remove unneeded semicolon
xfs: AGI length should be bounds checked
xfs: fix the calculation for "end" and "length"
xfs: fix xfs_btree_query_range callers to initialize btree rec fully
xfs: validate fsmap offsets specified in the query keys
xfs: fix logdev fsmap query result filtering
xfs: clean up the rtbitmap fsmap backend
xfs: fix getfsmap reporting past the last rt extent
xfs: fix integer overflows in the fsmap rtbitmap and logdev backends
xfs: fix interval filtering in multi-step fsmap queries
xfs: fix bounds check in xfs_defer_agfl_block()
xfs: AGF length has never been bounds checked
xfs: journal geometry is not properly bounds checked
xfs: don't block in busy flushing when freeing extents
xfs: allow extent free intents to be retried
xfs: pass alloc flags through to xfs_extent_busy_flush()
xfs: use deferred frees for btree block freeing
xfs: don't reverse order of items in bulk AIL insertion
xfs: remove redundant initializations of pointers drop_leaf and save_leaf
Linus Torvalds [Wed, 5 Jul 2023 19:55:06 +0000 (12:55 -0700)]
Merge tag 'pwm/for-6.5-rc1' of git://git./linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"There's a little bit of everything in here: we've got various
improvements and cleanups to drivers, some fixes across the board and
a bit of new hardware support"
* tag 'pwm/for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (22 commits)
dt-bindings: pwm: convert pwm-bcm2835 bindings to YAML
pwm: Add Renesas RZ/G2L MTU3a PWM driver
pwm: mtk_disp: Fix the disable flow of disp_pwm
dt-bindings: pwm: restrict node name suffixes
pwm: pca9685: Switch i2c driver back to use .probe()
pwm: ab8500: Fix error code in probe()
MAINTAINERS: add pwm to PolarFire SoC entry
pwm: add microchip soft ip corePWM driver
pwm: sysfs: Do not apply state to already disabled PWMs
pwm: imx-tpm: force 'real_period' to be zero in suspend
pwm: meson: make full use of common clock framework
pwm: meson: don't use hdmi/video clock as mux parent
pwm: meson: switch to using struct clk_parent_data for mux parents
pwm: meson: remove not needed check in meson_pwm_calc
pwm: meson: fix handling of period/duty if greater than UINT_MAX
pwm: meson: modify and simplify calculation in meson_pwm_get_state
dt-bindings: pwm: Add R-Car V3U device tree bindings
dt-bindings: pwm: imx: add i.MX8QXP compatible
pwm: mediatek: Add support for MT7981
dt-bindings: pwm: mediatek: Add mediatek,mt7981 compatible
...
Linus Torvalds [Wed, 5 Jul 2023 19:50:27 +0000 (12:50 -0700)]
Merge tag 'devicetree-for-6.5-2' of git://git./linux/kernel/git/robh/linux
Pull more devicetree updates from Rob Herring:
- Whitespace clean-ups in binding examples
- Restrict node name suffixes to "-[0-9]+" for cases of multiple
instances which don't have unit-addresses
- Convert brcm,kona-wdt and cdns,wdt-r1p2 watchdog bindings to DT
schema
* tag 'devicetree-for-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: soc: qcom: stats: Update maintainer email
dt-bindings: cleanup DTS example whitespaces
dt-bindings: timestamp: restrict node name suffixes
dt-bindings: slimbus: restrict node name suffixes
dt-bindings: watchdog: restrict node name suffixes
dt-bindings: watchdog: brcm,kona-wdt: convert txt file to yaml
dt-bindings: watchdog: cdns,wdt-r1p2: Convert cadence watchdog to yaml
Aravindhan Gunasekaran [Thu, 15 Jun 2023 06:30:43 +0000 (12:00 +0530)]
igc: Handle PPS start time programming for past time values
I225/6 hardware can be programmed to start PPS output once
the time in Target Time registers is reached. The time
programmed in these registers should always be into future.
Only then PPS output is triggered when SYSTIM register
reaches the programmed value. There are two modes in i225/6
hardware to program PPS, pulse and clock mode.
There were issues reported where PPS is not generated when
start time is in past.
Example 1, "echo 0 0 0 2 0 > /sys/class/ptp/ptp0/period"
In the current implementation, a value of '0' is programmed
into Target time registers and PPS output is in pulse mode.
Eventually an interrupt which is triggered upon SYSTIM
register reaching Target time is not fired. Thus no PPS
output is generated.
Example 2, "echo 0 0 0 1 0 > /sys/class/ptp/ptp0/period"
Above case, a value of '0' is programmed into Target time
registers and PPS output is in clock mode. Here, HW tries to
catch-up the current time by incrementing Target Time
register. This catch-up time seem to vary according to
programmed PPS period time as per the HW design. In my
experiments, the delay ranged between few tens of seconds to
few minutes. The PPS output is only generated after the
Target time register reaches current time.
In my experiments, I also observed PPS stopped working with
below test and could not recover until module is removed and
loaded again.
1) echo 0 <future time> 0 1 0 > /sys/class/ptp/ptp1/period
2) echo 0 0 0 1 0 > /sys/class/ptp/ptp1/period
3) echo 0 0 0 1 0 > /sys/class/ptp/ptp1/period
After this PPS did not work even if i re-program with proper
values. I could only get this back working by reloading the
driver.
This patch takes care of calculating and programming
appropriate future time value into Target Time registers.
Fixes:
5e91c72e560c ("igc: Fix PPS delta between two synchronized end-points")
Signed-off-by: Aravindhan Gunasekaran <aravindhan.gunasekaran@intel.com>
Reviewed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tan Tee Min [Fri, 9 Jun 2023 03:28:42 +0000 (11:28 +0800)]
igc: Include the length/type field and VLAN tag in queueMaxSDU
IEEE 802.1Q does not have clear definitions of what constitutes an
SDU (Service Data Unit), but IEEE Std 802.3 clause 3.1.2 does define
the MAC service primitives and clause 3.2.7 does define the MAC Client
Data for Q-tagged frames.
It shows that the mac_service_data_unit (MSDU) does NOT contain the
preamble, destination and source address, or FCS. The MSDU does contain
the length/type field, MAC client data, VLAN tag and any padding
data (prior to the FCS).
Thus, the maximum 802.3 frame size that is allowed to be transmitted
should be QueueMaxSDU (MSDU) + 16 (6 byte SA + 6 byte DA + 4 byte FCS).
Fixes:
92a0dcb8427d ("igc: offload queue max SDU from tc-taprio")
Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com>
Reviewed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Prasad Koya [Mon, 5 Jun 2023 18:09:01 +0000 (11:09 -0700)]
igc: set TP bit in 'supported' and 'advertising' fields of ethtool_link_ksettings
set TP bit in the 'supported' and 'advertising' fields. i225/226 parts
only support twisted pair copper.
Fixes:
8c5ad0dae93c ("igc: Add ethtool support")
Signed-off-by: Prasad Koya <prasad@arista.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Yinjun Zhang [Wed, 5 Jul 2023 05:28:18 +0000 (07:28 +0200)]
nfp: clean mc addresses in application firmware when closing port
When moving devices from one namespace to another, mc addresses are
cleaned in software while not removed from application firmware. Thus
the mc addresses are remained and will cause resource leak.
Now use `__dev_mc_unsync` to clean mc addresses when closing port.
Fixes:
e20aa071cd95 ("nfp: fix schedule in atomic context when sync mc address")
Cc: stable@vger.kernel.org
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Acked-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Message-ID: <
20230705052818.7122-1-louis.peens@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 5 Jul 2023 17:57:13 +0000 (10:57 -0700)]
Merge tag 'for-netdev' of https://git./linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-07-05
We've added 2 non-merge commits during the last 1 day(s) which contain
a total of 3 files changed, 16 insertions(+), 4 deletions(-).
The main changes are:
1) Fix BTF to warn but not returning an error for a NULL BTF to still be
able to load modules under CONFIG_DEBUG_INFO_BTF, from SeongJae Park.
2) Fix xsk sockets to honor SO_BINDTODEVICE in bind(), from Ilya Maximets.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
xsk: Honor SO_BINDTODEVICE on bind
bpf, btf: Warn but return no error for NULL btf from __register_btf_kfunc_id_set()
====================
Link: https://lore.kernel.org/r/20230705171716.6494-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dragos Tatulea [Wed, 31 May 2023 18:18:49 +0000 (21:18 +0300)]
net/mlx5e: RX, Fix page_pool page fragment tracking for XDP
Currently mlx5e releases pages directly to the page_pool for XDP_TX and
does page fragment counting for XDP_REDIRECT. RX pages from the
page_pool are leaking on XDP_REDIRECT because the xdp core will release
only one fragment out of MLX5E_PAGECNT_BIAS_MAX and subsequently the page
is marked as "skip release" which avoids the driver release.
A fix would be to take an extra fragment for XDP_REDIRECT and not set the
"skip release" bit so that the release on the driver side can handle the
remaining bias fragments. But this would be a shortsighted solution.
Instead, this patch converges the two XDP paths (XDP_TX and XDP_REDIRECT) to
always do fragment tracking. The "skip release" bit is no longer
necessary for XDP.
Fixes:
6f5742846053 ("net/mlx5e: RX, Enable skb page recycling through the page_pool")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Maher Sanalla [Tue, 20 Jun 2023 11:07:03 +0000 (14:07 +0300)]
net/mlx5: Query hca_cap_2 only when supported
On vport enable, where fw's hca caps are queried, the driver queries
hca_caps_2 without checking if fw truly supports them, causing a false
failure of vfs vport load and blocking SRIOV enablement on old devices
such as CX4 where hca_caps_2 support is missing.
Thus, add a check for the said caps support before accessing them.
Fixes:
e5b9642a33be ("net/mlx5: E-Switch, Implement devlink port function cmds to control migratable")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Yevgeny Kliteynik [Sun, 4 Jun 2023 09:45:38 +0000 (12:45 +0300)]
net/mlx5e: TC, CT: Offload ct clear only once
Non-clear CT action causes a flow rule split, while CT clear action
doesn't and is just a header-rewrite to the current flow rule.
But ct offload is done in post_parse and is per ct action instance,
so ct clear offload is parsed multiple times, while its deleted once.
Fix this by post_parsing the ct action only once per flow attribute
(which is per flow rule) by using a offloaded ct_attr flag.
Fixes:
08fe94ec5f77 ("net/mlx5e: TC, Remove special handling of CT action")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Vlad Buslov [Thu, 8 Jun 2023 07:32:10 +0000 (09:32 +0200)]
net/mlx5e: Check for NOT_READY flag state after locking
Currently the check for NOT_READY flag is performed before obtaining the
necessary lock. This opens a possibility for race condition when the flow
is concurrently removed from unready_flows list by the workqueue task,
which causes a double-removal from the list and a crash[0]. Fix the issue
by moving the flag check inside the section protected by
uplink_priv->unready_flows_lock mutex.
[0]:
[44376.389654] general protection fault, probably for non-canonical address 0xdead000000000108: 0000 [#1] SMP
[44376.391665] CPU: 7 PID: 59123 Comm: tc Not tainted 6.4.0-rc4+ #1
[44376.392984] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[44376.395342] RIP: 0010:mlx5e_tc_del_fdb_flow+0xb3/0x340 [mlx5_core]
[44376.396857] Code: 00 48 8b b8 68 ce 02 00 e8 8a 4d 02 00 4c 8d a8 a8 01 00 00 4c 89 ef e8 8b 79 88 e1 48 8b 83 98 06 00 00 48 8b 93 90 06 00 00 <48> 89 42 08 48 89 10 48 b8 00 01 00 00 00 00 ad de 48 89 83 90 06
[44376.399167] RSP: 0018:
ffff88812cc97570 EFLAGS:
00010246
[44376.399680] RAX:
dead000000000122 RBX:
ffff8881088e3800 RCX:
ffff8881881bac00
[44376.400337] RDX:
dead000000000100 RSI:
ffff88812cc97500 RDI:
ffff8881242f71b0
[44376.401001] RBP:
ffff88811cbb0940 R08:
0000000000000400 R09:
0000000000000001
[44376.401663] R10:
0000000000000001 R11:
0000000000000000 R12:
ffff88812c944000
[44376.402342] R13:
ffff8881242f71a8 R14:
ffff8881222b4000 R15:
0000000000000000
[44376.402999] FS:
00007f0451104800(0000) GS:
ffff88852cb80000(0000) knlGS:
0000000000000000
[44376.403787] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[44376.404343] CR2:
0000000000489108 CR3:
0000000123a79003 CR4:
0000000000370ea0
[44376.405004] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[44376.405665] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[44376.406339] Call Trace:
[44376.406651] <TASK>
[44376.406939] ? die_addr+0x33/0x90
[44376.407311] ? exc_general_protection+0x192/0x390
[44376.407795] ? asm_exc_general_protection+0x22/0x30
[44376.408292] ? mlx5e_tc_del_fdb_flow+0xb3/0x340 [mlx5_core]
[44376.408876] __mlx5e_tc_del_fdb_peer_flow+0xbc/0xe0 [mlx5_core]
[44376.409482] mlx5e_tc_del_flow+0x42/0x210 [mlx5_core]
[44376.410055] mlx5e_flow_put+0x25/0x50 [mlx5_core]
[44376.410529] mlx5e_delete_flower+0x24b/0x350 [mlx5_core]
[44376.411043] tc_setup_cb_reoffload+0x22/0x80
[44376.411462] fl_reoffload+0x261/0x2f0 [cls_flower]
[44376.411907] ? mlx5e_rep_indr_setup_ft_cb+0x160/0x160 [mlx5_core]
[44376.412481] ? mlx5e_rep_indr_setup_ft_cb+0x160/0x160 [mlx5_core]
[44376.413044] tcf_block_playback_offloads+0x76/0x170
[44376.413497] tcf_block_unbind+0x7b/0xd0
[44376.413881] tcf_block_setup+0x17d/0x1c0
[44376.414269] tcf_block_offload_cmd.isra.0+0xf1/0x130
[44376.414725] tcf_block_offload_unbind+0x43/0x70
[44376.415153] __tcf_block_put+0x82/0x150
[44376.415532] ingress_destroy+0x22/0x30 [sch_ingress]
[44376.415986] qdisc_destroy+0x3b/0xd0
[44376.416343] qdisc_graft+0x4d0/0x620
[44376.416706] tc_get_qdisc+0x1c9/0x3b0
[44376.417074] rtnetlink_rcv_msg+0x29c/0x390
[44376.419978] ? rep_movs_alternative+0x3a/0xa0
[44376.420399] ? rtnl_calcit.isra.0+0x120/0x120
[44376.420813] netlink_rcv_skb+0x54/0x100
[44376.421192] netlink_unicast+0x1f6/0x2c0
[44376.421573] netlink_sendmsg+0x232/0x4a0
[44376.421980] sock_sendmsg+0x38/0x60
[44376.422328] ____sys_sendmsg+0x1d0/0x1e0
[44376.422709] ? copy_msghdr_from_user+0x6d/0xa0
[44376.423127] ___sys_sendmsg+0x80/0xc0
[44376.423495] ? ___sys_recvmsg+0x8b/0xc0
[44376.423869] __sys_sendmsg+0x51/0x90
[44376.424226] do_syscall_64+0x3d/0x90
[44376.424587] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[44376.425046] RIP: 0033:0x7f045134f887
[44376.425403] Code: 0a 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
[44376.426914] RSP: 002b:
00007ffd63a82b98 EFLAGS:
00000246 ORIG_RAX:
000000000000002e
[44376.427592] RAX:
ffffffffffffffda RBX:
000000006481955f RCX:
00007f045134f887
[44376.428195] RDX:
0000000000000000 RSI:
00007ffd63a82c00 RDI:
0000000000000003
[44376.428796] RBP:
0000000000000000 R08:
0000000000000001 R09:
0000000000000000
[44376.429404] R10:
00007f0451208708 R11:
0000000000000246 R12:
0000000000000001
[44376.430039] R13:
0000000000409980 R14:
000000000047e538 R15:
0000000000485400
[44376.430644] </TASK>
[44376.430907] Modules linked in: mlx5_ib mlx5_core act_mirred act_tunnel_key cls_flower vxlan dummy sch_ingress openvswitch nsh rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_g
ss_krb5 auth_rpcgss oid_registry overlay zram zsmalloc fuse [last unloaded: mlx5_core]
[44376.433936] ---[ end trace
0000000000000000 ]---
[44376.434373] RIP: 0010:mlx5e_tc_del_fdb_flow+0xb3/0x340 [mlx5_core]
[44376.434951] Code: 00 48 8b b8 68 ce 02 00 e8 8a 4d 02 00 4c 8d a8 a8 01 00 00 4c 89 ef e8 8b 79 88 e1 48 8b 83 98 06 00 00 48 8b 93 90 06 00 00 <48> 89 42 08 48 89 10 48 b8 00 01 00 00 00 00 ad de 48 89 83 90 06
[44376.436452] RSP: 0018:
ffff88812cc97570 EFLAGS:
00010246
[44376.436924] RAX:
dead000000000122 RBX:
ffff8881088e3800 RCX:
ffff8881881bac00
[44376.437530] RDX:
dead000000000100 RSI:
ffff88812cc97500 RDI:
ffff8881242f71b0
[44376.438179] RBP:
ffff88811cbb0940 R08:
0000000000000400 R09:
0000000000000001
[44376.438786] R10:
0000000000000001 R11:
0000000000000000 R12:
ffff88812c944000
[44376.439393] R13:
ffff8881242f71a8 R14:
ffff8881222b4000 R15:
0000000000000000
[44376.439998] FS:
00007f0451104800(0000) GS:
ffff88852cb80000(0000) knlGS:
0000000000000000
[44376.440714] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[44376.441225] CR2:
0000000000489108 CR3:
0000000123a79003 CR4:
0000000000370ea0
[44376.441843] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[44376.442471] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Fixes:
ad86755b18d5 ("net/mlx5e: Protect unready flows with dedicated lock")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Saeed Mahameed [Tue, 27 Jun 2023 03:36:41 +0000 (20:36 -0700)]
net/mlx5: Register a unique thermal zone per device
Prior to this patch only one "mlx5" thermal zone could have been
registered regardless of the number of individual mlx5 devices in the
system.
To fix this setup a unique name per device to register its own thermal
zone.
In order to not register a thermal zone for a virtual device (VF/SF) add
a check for PF device type.
The new name is a concatenation between "mlx5_" and "<PCI_DEV_BDF>", which
will also help associating a thermal zone with its PCI device.
$ lspci | grep ConnectX
00:04.0 Ethernet controller: Mellanox Technologies MT2892 Family [ConnectX-6 Dx]
00:05.0 Ethernet controller: Mellanox Technologies MT2892 Family [ConnectX-6 Dx]
$ cat /sys/devices/virtual/thermal/thermal_zone0/type
mlx5_0000:00:04.0
$ cat /sys/devices/virtual/thermal/thermal_zone1/type
mlx5_0000:00:05.0
Fixes:
c1fef618d611 ("net/mlx5: Implement thermal zone")
CC: Sandipan Patra <spatra@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Dragos Tatulea [Mon, 22 May 2023 18:18:53 +0000 (21:18 +0300)]
net/mlx5e: RX, Fix flush and close release flow of regular rq for legacy rq
Regular (non-XSK) RQs get flushed on XSK setup and re-activated on XSK
close. If the same regular RQ is closed (a config change for example)
soon after the XSK close, a double release occurs because the missing
wqes get released a second time.
Fixes:
3f93f82988bc ("net/mlx5e: RX, Defer page release in legacy rq for better recycling")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Zhengchao Shao [Fri, 30 Jun 2023 01:49:03 +0000 (09:49 +0800)]
net/mlx5e: fix memory leak in mlx5e_ptp_open
When kvzalloc_node or kvzalloc failed in mlx5e_ptp_open, the memory
pointed by "c" or "cparams" is not freed, which can lead to a memory
leak. Fix by freeing the array in the error path.
Fixes:
145e5637d941 ("net/mlx5e: Add TX PTP port object support")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Zhengchao Shao [Fri, 30 Jun 2023 01:49:02 +0000 (09:49 +0800)]
net/mlx5e: fix memory leak in mlx5e_fs_tt_redirect_any_create
The memory pointed to by the fs->any pointer is not freed in the error
path of mlx5e_fs_tt_redirect_any_create, which can lead to a memory leak.
Fix by freeing the memory in the error path, thereby making the error path
identical to mlx5e_fs_tt_redirect_any_destroy().
Fixes:
0f575c20bf06 ("net/mlx5e: Introduce Flow Steering ANY API")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Zhengchao Shao [Wed, 28 Jun 2023 00:59:34 +0000 (08:59 +0800)]
net/mlx5e: fix double free in mlx5e_destroy_flow_table
In function accel_fs_tcp_create_groups(), when the ft->g memory is
successfully allocated but the 'in' memory fails to be allocated, the
memory pointed to by ft->g is released once. And in function
accel_fs_tcp_create_table, mlx5e_destroy_flow_table is called to release
the memory pointed to by ft->g again. This will cause double free problem.
Fixes:
c062d52ac24c ("net/mlx5e: Receive flow steering framework for accelerated TCP flows")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Linus Torvalds [Wed, 5 Jul 2023 17:54:43 +0000 (10:54 -0700)]
Merge tag 'soundwire-6.5-rc1' of git://git./linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- Stream handling and slave alert handling
- Qualcomm Soundwire v2.0.0 controller support
- Intel ACE2.x initial support and code reorganization
* tag 'soundwire-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (55 commits)
soundwire: stream: Make master_list ordered to prevent deadlocks
soundwire: bus: Prevent lockdep asserts when stream has multiple buses
soundwire: qcom: fix storing port config out-of-bounds
soundwire: intel_ace2x: fix SND_SOC_SOF_HDA_MLINK dependency
soundwire: debugfs: Add missing SCP registers
soundwire: stream: Remove unnecessary gotos
soundwire: stream: Invert logic on runtime alloc flags
soundwire: stream: Remove unneeded checks for NULL bus
soundwire: bandwidth allocation: Remove pointless variable
soundwire: cadence: revisit parity injection
soundwire: intel/cadence: update hardware reset sequence
soundwire: intel_bus_common: enable interrupts last
soundwire: intel_bus_common: update error log
soundwire: amd: Improve error message in remove callback
soundwire: debugfs: fix unbalanced pm_runtime_put()
soundwire: qcom: fix unbalanced pm_runtime_put()
soundwire: qcom: set clk stop need reset flag at runtime
soundwire: qcom: add software workaround for bus clash interrupt assertion
soundwire: qcom: wait for fifo to be empty before suspend
soundwire: qcom: drop unused struct qcom_swrm_ctrl members
...
Linus Torvalds [Wed, 5 Jul 2023 17:42:32 +0000 (10:42 -0700)]
Merge tag 'media/v6.5-1' of git://git./linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Lots of improvement at atomisp driver, which is starting to look in
good shape
- Mediatek vcodec driver has gained support for av1 and hevc stateless
codecs
- New sensor driver: ov01a10
- verisilicon driver has gained AV1 entropy helpers
- tegra-video has gained support for Tegra20 parallel input
- dvb core has gained an extra property to better support DVB-S2X
- as usual, lots of cleanups, fixes and improvements on media drivers
* tag 'media/v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (253 commits)
media: wl128x: fix a clang warning
media: dvb: mb86a20s: get rid of a clang-15 warning
media: cec: i2c: ch7322: also select REGMAP
media: add HAS_IOPORT dependencies
media: tc358746: select CONFIG_GENERIC_PHY
media: mediatek: vcodec: Add dbgfs help function
media: mediatek: vcodec: Add encode to support dbgfs
media: mediatek: vcodec: Change dbgfs interface to support encode
media: mediatek: vcodec: Get each instance format type
media: mediatek: vcodec: Get each context resolution information
media: mediatek: vcodec: Add a debugfs file to get different useful information
media: mediatek: vcodec: Add debug params to control different log level
media: mediatek: vcodec: Add debugfs interface to get debug information
media: mediatek: vcodec: support stateless AV1 decoder
media: verisilicon: Conditionally ignore native formats
media: verisilicon: Enable AV1 decoder on rk3588
media: verisilicon: Add film grain feature to AV1 driver
media: verisilicon: Add Rockchip AV1 decoder
media: verisilicon: Add AV1 entropy helpers
media: verisilicon: Compute motion vectors size for AV1 frames
...
Muhammad Husaini Zulkifli [Sat, 3 Jun 2023 12:59:34 +0000 (20:59 +0800)]
igc: Fix TX Hang issue when QBV Gate is closed
If a user schedules a Gate Control List (GCL) to close one of
the QBV gates while also transmitting a packet to that closed gate,
TX Hang will be happen. HW would not drop any packet when the gate
is closed and keep queuing up in HW TX FIFO until the gate is re-opened.
This patch implements the solution to drop the packet for the closed
gate.
This patch will also reset the adapter to perform SW initialization
for each 1st Gate Control List (GCL) to avoid hang.
This is due to the HW design, where changing to TSN transmit mode
requires SW initialization. Intel Discrete I225/6 transmit mode
cannot be changed when in dynamic mode according to Software User
Manual Section 7.5.2.1. Subsequent Gate Control List (GCL) operations
will proceed without a reset, as they already are in TSN Mode.
Step to reproduce:
DUT:
1) Configure GCL List with certain gate close.
BASE=$(date +%s%N)
tc qdisc replace dev $IFACE parent root handle 100 taprio \
num_tc 4 \
map 0 1 2 3 3 3 3 3 3 3 3 3 3 3 3 3 \
queues 1@0 1@1 1@2 1@3 \
base-time $BASE \
sched-entry S 0x8 500000 \
sched-entry S 0x4 500000 \
flags 0x2
2) Transmit the packet to closed gate. You may use udp_tai
application to transmit UDP packet to any of the closed gate.
./udp_tai -i <interface> -P 100000 -p 90 -c 1 -t <0/1> -u 30004
Fixes:
ec50a9d437f0 ("igc: Add support for taprio offloading")
Co-developed-by: Tan Tee Min <tee.min.tan@linux.intel.com>
Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com>
Tested-by: Chwee Lin Choong <chwee.lin.choong@intel.com>
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Linus Torvalds [Wed, 5 Jul 2023 17:34:30 +0000 (10:34 -0700)]
Merge tag 'trace-tools-v6.5' of git://git./linux/kernel/git/trace/linux-trace
Pull tracing tooling updates from Steven Rostedt:
- Add cgroup support for rtla via the -C option
- Add --house-keeping option that tells rtla where to place the
housekeeping threads
- Have rtla/timerlat have its own tracing instance instead of using the
top level tracing instance that is the default for other tracing
users to use
- Add auto analysis to timerlat_hist
- Have rtla start the tracers after creating the instances
- Reduce rtla hwnoise down to 75% from 100% as it runs with preemption
disabled and can cause system instability at 100%
- Add support to run timerlat_top and timerlat_hist threads in
user-space instead of just using the kernel tasks
- Some minor clean ups and documentation changes
* tag 'trace-tools-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
Documentation: Add tools/rtla timerlat -u option documentation
rtla/timerlat_hist: Add timerlat user-space support
rtla/timerlat_top: Add timerlat user-space support
rtla/hwnoise: Reduce runtime to 75%
rtla: Start the tracers after creating all instances
rtla/timerlat_hist: Add auto-analysis support
rtla/timerlat: Give timerlat auto analysis its own instance
rtla: Automatically move rtla to a house-keeping cpu
rtla: Change monitored_cpus from char * to cpu_set_t
rtla: Add --house-keeping option
rtla: Add -C cgroup support
Linus Torvalds [Wed, 5 Jul 2023 17:28:38 +0000 (10:28 -0700)]
Merge tag 'parisc-for-6.5-rc1-2' of git://git./linux/kernel/git/deller/parisc-linux
Pull more parisc architecture updates from Helge Deller:
- Fix all compiler warnings in arch/parisc and drivers/parisc when
compiled with W=1
* tag 'parisc-for-6.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: syscalls: Avoid compiler warnings with W=1
parisc: math-emu: Avoid compiler warnings with W=1
parisc: Raise minimal GCC version to 12.0.0
parisc: unwind: Avoid missing prototype warning for handle_interruption()
parisc: smp: Add declaration for start_cpu_itimer()
parisc: pdt: Get prototype for arch_report_meminfo()
Muhammad Husaini Zulkifli [Wed, 17 May 2023 00:18:12 +0000 (08:18 +0800)]
igc: Remove delay during TX ring configuration
Remove unnecessary delay during the TX ring configuration.
This will cause delay, especially during link down and
link up activity.
Furthermore, old SKUs like as I225 will call the reset_adapter
to reset the controller during TSN mode Gate Control List (GCL)
setting. This will add more time to the configuration of the
real-time use case.
It doesn't mentioned about this delay in the Software User Manual.
It might have been ported from legacy code I210 in the past.
Fixes:
13b5b7fd6a4a ("igc: Add support for Tx/Rx rings")
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Muhammad Husaini Zulkifli [Mon, 15 May 2023 06:03:36 +0000 (14:03 +0800)]
igc: Add condition for qbv_config_change_errors counter
Add condition to increase the qbv counter during taprio qbv
configuration only.
There might be a case when TC already been setup then user configure
the ETF/CBS qdisc and this counter will increase if no condition above.
Fixes:
ae4fe4698300 ("igc: Add qbv_config_change_errors counter")
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Linus Torvalds [Wed, 5 Jul 2023 16:33:31 +0000 (09:33 -0700)]
gup: make the stack expansion warning a bit more targeted
I added a warning about about GUP no longer expanding the stack in
commit
a425ac5365f6 ("gup: add warning if some caller would seem to want
stack expansion"), but didn't really expect anybody to hit it.
And it's true that nobody seems to have hit a _real_ case yet, but we
certainly have a number of reports of false positives. Which not only
causes extra noise in itself, but might also end up hiding any real
cases if they do exist.
So let's tighten up the warning condition, and replace the simplistic
vma = find_vma(mm, start);
if (vma && (start < vma->vm_start)) {
WARN_ON_ONCE(vma->vm_flags & VM_GROWSDOWN);
with a
vma = gup_vma_lookup(mm, start);
helper function which works otherwise like just "vma_lookup()", but with
some heuristics for when to warn about gup no longer causing stack
expansion.
In particular, don't just warn for "below the stack", but warn if it's
_just_ below the stack (with "just below" arbitrarily defined as 64kB,
because why not?). And rate-limit it to at most once per hour, which
means that any false positives shouldn't completely hide subsequent
reports, but we won't be flooding the logs about it either.
The previous code triggered when some GUP user (chromium crashpad)
accessing past the end of the previous vma, for example. That has never
expanded the stack, it just causes GUP to return early, and as such we
shouldn't be warning about it.
This is still going trigger the randomized testers, but to mitigate the
noise from that, use "dump_stack()" instead of "WARN_ON_ONCE()" to get
the kernel call chain. We'll get the relevant information, but syzbot
shouldn't get too upset about it.
Also, don't even bother with the GROWSUP case, which would be using
different heuristics entirely, but only happens on parisc.
Reported-by: kernel test robot <oliver.sang@intel.com>
Reported-by: John Hubbard <jhubbard@nvidia.com>
Reported-by: syzbot+6cf44e127903fdf9d929@syzkaller.appspotmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sridhar Samudrala [Sat, 10 Jun 2023 00:40:24 +0000 (17:40 -0700)]
ice: Fix tx queue rate limit when TCs are configured
Configuring tx_maxrate via sysfs interface
/sys/class/net/eth0/queues/tx-1/tx_maxrate was not working when
TCs are configured because always main VSI was being used. Fix by
using correct VSI in ice_set_tx_maxrate when TCs are configured.
Fixes:
1ddef455f4a8 ("ice: Add NDO callback to set the maximum per-queue bitrate")
Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Sridhar Samudrala [Sat, 10 Jun 2023 00:40:23 +0000 (17:40 -0700)]
ice: Fix max_rate check while configuring TX rate limits
Remove incorrect check in ice_validate_mqprio_opt() that limits
filter configuration when sum of max_rates of all TCs exceeds
the link speed. The max rate of each TC is unrelated to value
used by other TCs and is valid as long as it is less than link
speed.
Fixes:
fbc7b27af0f9 ("ice: enable ndo_setup_tc support for mqprio_qdisc")
Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Maulik Shah [Mon, 3 Jul 2023 09:20:26 +0000 (14:50 +0530)]
dt-bindings: soc: qcom: stats: Update maintainer email
Replace my email.
Cc: devicetree@vger.kernel.org
Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230703092026.4923-1-quic_mkshah@quicinc.com
Signed-off-by: Rob Herring <robh@kernel.org>
Krzysztof Kozlowski [Sun, 2 Jul 2023 18:23:08 +0000 (20:23 +0200)]
dt-bindings: cleanup DTS example whitespaces
The DTS code coding style expects spaces around '=' sign.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #display/msm
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20230702182308.7583-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Thadeu Lima de Souza Cascardo [Wed, 5 Jul 2023 12:12:55 +0000 (09:12 -0300)]
netfilter: nf_tables: do not ignore genmask when looking up chain by id
When adding a rule to a chain referring to its ID, if that chain had been
deleted on the same batch, the rule might end up referring to a deleted
chain.
This will lead to a WARNING like following:
[ 33.098431] ------------[ cut here ]------------
[ 33.098678] WARNING: CPU: 5 PID: 69 at net/netfilter/nf_tables_api.c:2037 nf_tables_chain_destroy+0x23d/0x260
[ 33.099217] Modules linked in:
[ 33.099388] CPU: 5 PID: 69 Comm: kworker/5:1 Not tainted 6.4.0+ #409
[ 33.099726] Workqueue: events nf_tables_trans_destroy_work
[ 33.100018] RIP: 0010:nf_tables_chain_destroy+0x23d/0x260
[ 33.100306] Code: 8b 7c 24 68 e8 64 9c ed fe 4c 89 e7 e8 5c 9c ed fe 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 89 c6 89 c7 c3 cc cc cc cc <0f> 0b 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 89 c6 89 c7
[ 33.101271] RSP: 0018:
ffffc900004ffc48 EFLAGS:
00010202
[ 33.101546] RAX:
0000000000000001 RBX:
ffff888006fc0a28 RCX:
0000000000000000
[ 33.101920] RDX:
0000000000000000 RSI:
0000000000000000 RDI:
0000000000000000
[ 33.102649] RBP:
ffffc900004ffc78 R08:
0000000000000000 R09:
0000000000000000
[ 33.103018] R10:
0000000000000000 R11:
0000000000000000 R12:
ffff8880135ef500
[ 33.103385] R13:
0000000000000000 R14:
dead000000000122 R15:
ffff888006fc0a10
[ 33.103762] FS:
0000000000000000(0000) GS:
ffff888024c80000(0000) knlGS:
0000000000000000
[ 33.104184] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 33.104493] CR2:
00007fe863b56a50 CR3:
00000000124b0001 CR4:
0000000000770ee0
[ 33.104872] PKRU:
55555554
[ 33.104999] Call Trace:
[ 33.105113] <TASK>
[ 33.105214] ? show_regs+0x72/0x90
[ 33.105371] ? __warn+0xa5/0x210
[ 33.105520] ? nf_tables_chain_destroy+0x23d/0x260
[ 33.105732] ? report_bug+0x1f2/0x200
[ 33.105902] ? handle_bug+0x46/0x90
[ 33.106546] ? exc_invalid_op+0x19/0x50
[ 33.106762] ? asm_exc_invalid_op+0x1b/0x20
[ 33.106995] ? nf_tables_chain_destroy+0x23d/0x260
[ 33.107249] ? nf_tables_chain_destroy+0x30/0x260
[ 33.107506] nf_tables_trans_destroy_work+0x669/0x680
[ 33.107782] ? mark_held_locks+0x28/0xa0
[ 33.107996] ? __pfx_nf_tables_trans_destroy_work+0x10/0x10
[ 33.108294] ? _raw_spin_unlock_irq+0x28/0x70
[ 33.108538] process_one_work+0x68c/0xb70
[ 33.108755] ? lock_acquire+0x17f/0x420
[ 33.108977] ? __pfx_process_one_work+0x10/0x10
[ 33.109218] ? do_raw_spin_lock+0x128/0x1d0
[ 33.109435] ? _raw_spin_lock_irq+0x71/0x80
[ 33.109634] worker_thread+0x2bd/0x700
[ 33.109817] ? __pfx_worker_thread+0x10/0x10
[ 33.110254] kthread+0x18b/0x1d0
[ 33.110410] ? __pfx_kthread+0x10/0x10
[ 33.110581] ret_from_fork+0x29/0x50
[ 33.110757] </TASK>
[ 33.110866] irq event stamp: 1651
[ 33.111017] hardirqs last enabled at (1659): [<
ffffffffa206a209>] __up_console_sem+0x79/0xa0
[ 33.111379] hardirqs last disabled at (1666): [<
ffffffffa206a1ee>] __up_console_sem+0x5e/0xa0
[ 33.111740] softirqs last enabled at (1616): [<
ffffffffa1f5d40e>] __irq_exit_rcu+0x9e/0xe0
[ 33.112094] softirqs last disabled at (1367): [<
ffffffffa1f5d40e>] __irq_exit_rcu+0x9e/0xe0
[ 33.112453] ---[ end trace
0000000000000000 ]---
This is due to the nft_chain_lookup_byid ignoring the genmask. After this
change, adding the new rule will fail as it will not find the chain.
Fixes:
837830a4b439 ("netfilter: nf_tables: add NFTA_RULE_CHAIN_ID attribute")
Cc: stable@vger.kernel.org
Reported-by: Mingi Cho of Theori working with ZDI
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Florian Westphal [Tue, 4 Jul 2023 10:25:23 +0000 (12:25 +0200)]
netfilter: conntrack: don't fold port numbers into addresses before hashing
Originally this used jhash2() over tuple and folded the zone id,
the pernet hash value, destination port and l4 protocol number into the
32bit seed value.
When the switch to siphash was done, I used an on-stack temporary
buffer to build a suitable key to be hashed via siphash().
But this showed up as performance regression, so I got rid of
the temporary copy and collected to-be-hashed data in 4 u64 variables.
This makes it easy to build tuples that produce the same hash, which isn't
desirable even though chain lengths are limited.
Switch back to plain siphash, but just like with jhash2(), take advantage
of the fact that most of to-be-hashed data is already in a suitable order.
Use an empty struct as annotation in 'struct nf_conntrack_tuple' to mark
last member that can be used as hash input.
The only remaining data that isn't present in the tuple structure are the
zone identifier and the pernet hash: fold those into the key.
Fixes:
d2c806abcf0b ("netfilter: conntrack: use siphash_4u64")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Florent Revest [Mon, 3 Jul 2023 14:52:16 +0000 (16:52 +0200)]
netfilter: conntrack: Avoid nf_ct_helper_hash uses after free
If nf_conntrack_init_start() fails (for example due to a
register_nf_conntrack_bpf() failure), the nf_conntrack_helper_fini()
clean-up path frees the nf_ct_helper_hash map.
When built with NF_CONNTRACK=y, further netfilter modules (e.g:
netfilter_conntrack_ftp) can still be loaded and call
nf_conntrack_helpers_register(), independently of whether nf_conntrack
initialized correctly. This accesses the nf_ct_helper_hash dangling
pointer and causes a uaf, possibly leading to random memory corruption.
This patch guards nf_conntrack_helper_register() from accessing a freed
or uninitialized nf_ct_helper_hash pointer and fixes possible
uses-after-free when loading a conntrack module.
Cc: stable@vger.kernel.org
Fixes:
12f7a505331e ("netfilter: add user-space connection tracking helper infrastructure")
Signed-off-by: Florent Revest <revest@chromium.org>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Florian Westphal [Mon, 3 Jul 2023 11:43:18 +0000 (13:43 +0200)]
netfilter: conntrack: gre: don't set assured flag for clash entries
Now that conntrack core is allowd to insert clashing entries, make sure
GRE won't set assured flag on NAT_CLASH entries, just like UDP.
Doing so prevents early_drop logic for these entries.
Fixes:
d671fd82eaa9 ("netfilter: conntrack: allow insertion clash of gre protocol")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pablo Neira Ayuso [Wed, 28 Jun 2023 14:24:27 +0000 (16:24 +0200)]
netfilter: nf_tables: report use refcount overflow
Overflow use refcount checks are not complete.
Add helper function to deal with object reference counter tracking.
Report -EMFILE in case UINT_MAX is reached.
nft_use_dec() splats in case that reference counter underflows,
which should not ever happen.
Add nft_use_inc_restore() and nft_use_dec_restore() which are used
to restore reference counter from error and abort paths.
Use u32 in nft_flowtable and nft_object since helper functions cannot
work on bitfields.
Remove the few early incomplete checks now that the helper functions
are in place and used to check for refcount overflow.
Fixes:
96518518cc41 ("netfilter: add nftables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
David S. Miller [Wed, 5 Jul 2023 09:51:14 +0000 (10:51 +0100)]
Merge branch 'mptcp-fixes'
Matthieu Baerts says:
====================
mptcp: fixes for v6.5
Here is a first batch of fixes for v6.5 and older.
The fixes are not linked to each others.
Patch 1 ensures subflows are unhashed before cleaning the backlog to
avoid races. This fixes another recent fix from v6.4.
Patch 2 does not rely on implicit state check in mptcp_listen() to avoid
races when receiving an MP_FASTCLOSE. A regression from v5.17.
The rest fixes issues in the selftests.
Patch 3 makes sure errors when setting up the environment are no longer
ignored. For v5.17+.
Patch 4 uses 'iptables-legacy' if available to be able to run on older
kernels. A fix for v5.13 and newer.
Patch 5 catches errors when issues are detected with packet marks. Also
for v5.13+.
Patch 6 uses the correct variable instead of an undefined one. Even if
there was no visible impact, it can help to find regressions later. An
issue visible in v5.19+.
Patch 7 makes sure errors with some sub-tests are reported to have the
selftest marked as failed as expected. Also for v5.19+.
Patch 8 adds a kernel config that is required to execute MPTCP
selftests. It is valid for v5.9+.
Patch 9 fixes issues when validating the userspace path-manager with
32-bit arch, an issue affecting v5.19+.
====================
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Matthieu Baerts [Tue, 4 Jul 2023 20:44:41 +0000 (22:44 +0200)]
selftests: mptcp: pm_nl_ctl: fix 32-bit support
When using pm_nl_ctl to validate userspace path-manager's behaviours, it
was failing on 32-bit architectures ~half of the time.
pm_nl_ctl was not reporting any error but the command was not doing what
it was expected to do. As a result, the expected linked event was not
triggered after and the test failed.
This is due to the fact the token given in argument to the application
was parsed as an integer with atoi(): in a 32-bit arch, if the number
was bigger than INT_MAX,
2147483647 was used instead.
This can simply be fixed by using strtoul() instead of atoi().
The errors have been seen "by chance" when manually looking at the
results from LKFT.
Fixes:
9a0b36509df0 ("selftests: mptcp: support MPTCP_PM_CMD_ANNOUNCE")
Cc: stable@vger.kernel.org
Fixes:
ecd2a77d672f ("selftests: mptcp: support MPTCP_PM_CMD_REMOVE")
Fixes:
cf8d0a6dfd64 ("selftests: mptcp: support MPTCP_PM_CMD_SUBFLOW_CREATE")
Fixes:
57cc361b8d38 ("selftests: mptcp: support MPTCP_PM_CMD_SUBFLOW_DESTROY")
Fixes:
ca188a25d43f ("selftests: mptcp: userspace PM support for MP_PRIO signals")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matthieu Baerts [Tue, 4 Jul 2023 20:44:40 +0000 (22:44 +0200)]
selftests: mptcp: depend on SYN_COOKIES
MPTCP selftests are using TCP SYN Cookies for quite a while now, since
v5.9.
Some CIs don't have this config option enabled and this is causing
issues in the tests:
# ns1 MPTCP -> ns1 (10.0.1.1:10000 ) MPTCP (duration 167ms) sysctl: cannot stat /proc/sys/net/ipv4/tcp_syncookies: No such file or directory
# [ OK ]./mptcp_connect.sh: line 554: [: -eq: unary operator expected
There is no impact in the results but the test is not doing what it is
supposed to do.
Fixes:
fed61c4b584c ("selftests: mptcp: make 2nd net namespace use tcp syn cookies unconditionally")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matthieu Baerts [Tue, 4 Jul 2023 20:44:39 +0000 (22:44 +0200)]
selftests: mptcp: userspace_pm: report errors with 'remove' tests
A message was mentioning an issue with the "remove" tests but the
selftest was not marked as failed.
Directly exit with an error like it is done everywhere else in this
selftest.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes:
259a834fadda ("selftests: mptcp: functional tests for the userspace PM type")
Cc: stable@vger.kernel.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matthieu Baerts [Tue, 4 Jul 2023 20:44:38 +0000 (22:44 +0200)]
selftests: mptcp: userspace_pm: use correct server port
"server4_port" variable is not set but "app4_port" is the server port in
v4 and the correct variable name to use.
The port is optional so there was no visible impact.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes:
ca188a25d43f ("selftests: mptcp: userspace PM support for MP_PRIO signals")
Cc: stable@vger.kernel.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matthieu Baerts [Tue, 4 Jul 2023 20:44:37 +0000 (22:44 +0200)]
selftests: mptcp: sockopt: return error if wrong mark
When an error was detected when checking the marks, a message was
correctly printed mentioning the error but followed by another one
saying everything was OK and the selftest was not marked as failed as
expected.
Now the 'ret' variable is directly set to 1 in order to make sure the
exit is done with an error, similar to what is done in other functions.
While at it, the error is correctly propagated to the caller.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes:
dc65fe82fb07 ("selftests: mptcp: add packet mark test case")
Cc: stable@vger.kernel.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matthieu Baerts [Tue, 4 Jul 2023 20:44:36 +0000 (22:44 +0200)]
selftests: mptcp: sockopt: use 'iptables-legacy' if available
IPTables commands using 'iptables-nft' fail on old kernels, at least
on v5.15 because it doesn't see the default IPTables chains:
$ iptables -L
iptables/1.8.2 Failed to initialize nft: Protocol not supported
As a first step before switching to NFTables, we can use iptables-legacy
if available.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes:
dc65fe82fb07 ("selftests: mptcp: add packet mark test case")
Cc: stable@vger.kernel.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matthieu Baerts [Tue, 4 Jul 2023 20:44:35 +0000 (22:44 +0200)]
selftests: mptcp: connect: fail if nft supposed to work
In case of "external" errors when preparing the environment for the
TProxy tests, the subtests were marked as skipped.
This is fine but it means these errors are ignored. On MPTCP Public CI,
we do want to catch such issues and mark the selftest as failed if there
are such issues. We can then use mptcp_lib_fail_if_expected_feature()
helper that has been recently added to fail if needed.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes:
5fb62e9cd3ad ("selftests: mptcp: add tproxy test case")
Cc: stable@vger.kernel.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Tue, 4 Jul 2023 20:44:34 +0000 (22:44 +0200)]
mptcp: do not rely on implicit state check in mptcp_listen()
Since the blamed commit, closing the first subflow resets the first
subflow socket state to SS_UNCONNECTED.
The current mptcp listen implementation relies only on such
state to prevent touching not-fully-disconnected sockets.
Incoming mptcp fastclose (or paired endpoint removal) unconditionally
closes the first subflow.
All the above allows an incoming fastclose followed by a listen() call
to successfully race with a blocking recvmsg(), potentially causing the
latter to hit a divide by zero bug in cleanup_rbuf/__tcp_select_window().
Address the issue explicitly checking the msk socket state in
mptcp_listen(). An alternative solution would be moving the first
subflow socket state update into mptcp_disconnect(), but in the long
term the first subflow socket should be removed: better avoid relaying
on it for internal consistency check.
Fixes:
b29fcfb54cd7 ("mptcp: full disconnect implementation")
Cc: stable@vger.kernel.org
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/414
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Tue, 4 Jul 2023 20:44:33 +0000 (22:44 +0200)]
mptcp: ensure subflow is unhashed before cleaning the backlog
While tacking care of the mptcp-level listener I unintentionally
moved the subflow level unhash after the subflow listener backlog
cleanup.
That could cause some nasty race and makes the code harder to read.
Address the issue restoring the proper order of operations.
Fixes:
57fc0f1ceaa4 ("mptcp: ensure listener is unhashed before updating the sk status")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thorsten Winkler [Tue, 4 Jul 2023 14:41:21 +0000 (16:41 +0200)]
s390/qeth: Fix vipa deletion
Change boolean parameter of function "qeth_l3_vipa_store" inside the
"qeth_l3_dev_vipa_del4_store" function from "true" to "false" because
"true" is used for adding a virtual ip address and "false" for deleting.
Fixes:
2390166a6b45 ("s390/qeth: clean up L3 sysfs code")
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Thorsten Winkler <twinkler@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Tue, 4 Jul 2023 22:05:12 +0000 (15:05 -0700)]
Revert ".gitignore: ignore *.cover and *.mbx"
This reverts commit
534066a983df0935847061c844eb178f8a53a9e7.
It's actively detrimental in that it hides files that shouldn't be
hidden.
If I have some b4 mbx file in my git directory, it either was already
applied with "git am" and is now stale, or maybe it's waiting for that
to happen. In neither case is "ignore it" the right option.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 4 Jul 2023 20:50:38 +0000 (13:50 -0700)]
Merge tag 'core_guards_for_6.5_rc1' of git://git./linux/kernel/git/peterz/queue
Pull scope-based resource management infrastructure from Peter Zijlstra:
"These are the first few patches in the Scope-based Resource Management
series that introduce the infrastructure but not any conversions as of
yet.
Adding the infrastructure now allows multiple people to start using
them.
Of note is that Sparse will need some work since it doesn't yet
understand this attribute and might have decl-after-stmt issues"
* tag 'core_guards_for_6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peterz/queue:
kbuild: Drop -Wdeclaration-after-statement
locking: Introduce __cleanup() based infrastructure
apparmor: Free up __cleanup() name
dmaengine: ioat: Free up __cleanup() name
David Howells [Tue, 4 Jul 2023 19:22:15 +0000 (20:22 +0100)]
afs: Fix accidental truncation when storing data
When an AFS FS.StoreData RPC call is made, amongst other things it is
given the resultant file size to be. On the server, this is processed
by truncating the file to new size and then writing the data.
Now, kafs has a lock (vnode->io_lock) that serves to serialise
operations against a specific vnode (ie. inode), but the parameters for
the op are set before the lock is taken. This allows two writebacks
(say sync and kswapd) to race - and if writes are ongoing the writeback
for a later write could occur before the writeback for an earlier one if
the latter gets interrupted.
Note that afs_writepages() cannot take i_mutex and only takes a shared
lock on vnode->validate_lock.
Also note that the server does the truncation and the write inside a
lock, so there's no problem at that end.
Fix this by moving the calculation for the proposed new i_size inside
the vnode->io_lock. Also reset the iterator (which we might have read
from) and update the mtime setting there.
Fixes:
bd80d8a80e12 ("afs: Use ITER_XARRAY for writing")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/3526895.1687960024@warthog.procyon.org.uk/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hariprasad Kelam [Tue, 4 Jul 2023 04:26:53 +0000 (09:56 +0530)]
octeontx-af: fix hardware timestamp configuration
MAC block on CN10K (RPM) supports hardware timestamp configuration. The
previous patch which added timestamp configuration support has a bug.
Though the netdev driver requests to disable timestamp configuration,
the driver is always enabling it.
This patch fixes the same.
Fixes:
d1489208681d ("octeontx2-af: cn10k: RPM hardware timestamp configuration")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Tue, 4 Jul 2023 18:52:54 +0000 (11:52 -0700)]
Merge tag 'ovl-update-6.5-2' of git://git./linux/kernel/git/overlayfs/vfs
Pull more overlayfs updates from Amir Goldstein:
"This is a small 'move code around' followup by Christian to his work
on porting overlayfs to the new mount api for 6.5. It makes things a
bit cleaner and simpler for the next development cycle when I hand
overlayfs back over to Miklos"
* tag 'ovl-update-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
ovl: move all parameter handling into params.{c,h}
Linus Torvalds [Tue, 4 Jul 2023 18:45:16 +0000 (11:45 -0700)]
Merge tag 'gfs2-v6.4-rc5-fixes' of git://git./linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Andreas Gruenbacher:
- Move the freeze/thaw logic from glock callback context to process /
worker thread context to prevent deadlocks
- Fix a quota reference couting bug in do_qc()
- Carry on deallocating inodes even when gfs2_rindex_update() fails
- Retry filesystem-internal reads when they are interruped by a signal
- Eliminate kmap_atomic() in favor of kmap_local_page() /
memcpy_{from,to}_page()
- Get rid of noop_direct_IO
- And a few more minor fixes and cleanups
* tag 'gfs2-v6.4-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (23 commits)
gfs2: Add quota_change type
gfs2: Use memcpy_{from,to}_page where appropriate
gfs2: Convert remaining kmap_atomic calls to kmap_local_page
gfs2: Replace deprecated kmap_atomic with kmap_local_page
gfs: Get rid of unnucessary locking in inode_go_dump
gfs2: gfs2_freeze_lock_shared cleanup
gfs2: Replace sd_freeze_state with SDF_FROZEN flag
gfs2: Rework freeze / thaw logic
gfs2: Rename SDF_{FS_FROZEN => FREEZE_INITIATOR}
gfs2: Reconfiguring frozen filesystem already rejected
gfs2: Rename gfs2_freeze_lock{ => _shared }
gfs2: Rename the {freeze,thaw}_super callbacks
gfs2: Rename remaining "transaction" glock references
gfs2: retry interrupted internal reads
gfs2: Fix possible data races in gfs2_show_options()
gfs2: Fix duplicate should_fault_in_pages() call
gfs2: set FMODE_CAN_ODIRECT instead of a dummy direct_IO method
gfs2: Don't remember delete unless it's successful
gfs2: Update rl_unlinked before releasing rgrp lock
gfs2: Fix gfs2_qa_get imbalance in gfs2_quota_hold
...
David S. Miller [Tue, 4 Jul 2023 18:42:27 +0000 (19:42 +0100)]
Merge branch 'dsa-ll-fixes'
Vladimir Oltean says:
====================
dsa: Fix mangled link-local MAC DAs with SJA1105 DSA
The SJA1105 hardware tagging protocol is weird and will put DSA
information (source port, switch ID) in the MAC DA of the packets sent
to the CPU, and then send some additional (meta) packets which contain
the original bytes from the previous packet's MAC DA.
The tagging protocol driver contains logic to handle this, but the meta
frames are optional functionality, and there are configurations when
they aren't received (no PTP RX timestamping). Thus, the MAC DA from
packets sent to the stack is not correct in all cases.
Also, during testing it was found that the MAC DA patching procedure was
incorrect.
The investigation comes as a result of this discussion with Paolo:
https://lore.kernel.org/netdev/
f494387c8d55d9b1d5a3e88beedeeb448f2e6cc3.camel@redhat.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Mon, 3 Jul 2023 22:05:45 +0000 (01:05 +0300)]
net: dsa: sja1105: always enable the send_meta options
incl_srcpt has the limitation, mentioned in commit
b4638af8885a ("net:
dsa: sja1105: always enable the INCL_SRCPT option"), that frames with a
MAC DA of 01:80:c2:xx:yy:zz will be received as 01:80:c2:00:00:zz unless
PTP RX timestamping is enabled.
The incl_srcpt option was initially unconditionally enabled, then that
changed with commit
42824463d38d ("net: dsa: sja1105: Limit use of
incl_srcpt to bridge+vlan mode"), then again with
b4638af8885a ("net:
dsa: sja1105: always enable the INCL_SRCPT option"). Bottom line is that
it now needs to be always enabled, otherwise the driver does not have a
reliable source of information regarding source_port and switch_id for
link-local traffic (tag_8021q VLANs may be imprecise since now they
identify an entire bridging domain when ports are not standalone).
If we accept that PTP RX timestamping (and therefore, meta frame
generation) is always enabled in hardware, then that limitation could be
avoided and packets with any MAC DA can be properly received, because
meta frames do contain the original bytes from the MAC DA of their
associated link-local packet.
This change enables meta frame generation unconditionally, which also
has the nice side effects of simplifying the switch control path
(a switch reset is no longer required on hwtstamping settings change)
and the tagger data path (it no longer needs to be informed whether to
expect meta frames or not - it always does).
Fixes:
227d07a07ef1 ("net: dsa: sja1105: Add support for traffic through standalone ports")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Mon, 3 Jul 2023 22:05:44 +0000 (01:05 +0300)]
net: dsa: tag_sja1105: fix MAC DA patching from meta frames
The SJA1105 manual says that at offset 4 into the meta frame payload we
have "MAC destination byte 2" and at offset 5 we have "MAC destination
byte 1". These are counted from the LSB, so byte 1 is h_dest[ETH_HLEN-2]
aka h_dest[4] and byte 2 is h_dest[ETH_HLEN-3] aka h_dest[3].
The sja1105_meta_unpack() function decodes these the other way around,
so a frame with MAC DA 01:80:c2:11:22:33 is received by the network
stack as having 01:80:c2:22:11:33.
Fixes:
e53e18a6fe4d ("net: dsa: sja1105: Receive and decode meta frames")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Azeem Shaikh [Mon, 3 Jul 2023 17:58:40 +0000 (17:58 +0000)]
net: Replace strlcpy with strscpy
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
No return values were used, so direct replacement is safe.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault [Mon, 3 Jul 2023 17:14:46 +0000 (19:14 +0200)]
pptp: Fix fib lookup calls.
PPTP uses pppox sockets (struct pppox_sock). These sockets don't embed
an inet_sock structure, so it's invalid to call inet_sk() on them.
Therefore, the ip_route_output_ports() call in pptp_connect() has two
problems:
* The tos variable is set with RT_CONN_FLAGS(sk), which calls
inet_sk() on the pppox socket.
* ip_route_output_ports() tries to retrieve routing flags using
inet_sk_flowi_flags(), which is also going to call inet_sk() on the
pppox socket.
While PPTP doesn't use inet sockets, it's actually really layered on
top of IP and therefore needs a proper way to do fib lookups. So let's
define pptp_route_output() to get a struct rtable from a pptp socket.
Let's also replace the ip_route_output_ports() call of pptp_xmit() for
consistency.
In practice, this means that:
* pptp_connect() sets ->flowi4_tos and ->flowi4_flags to zero instead
of using bits of unrelated struct pppox_sock fields.
* pptp_xmit() now respects ->sk_mark and ->sk_uid.
* pptp_xmit() now calls the security_sk_classify_flow() security
hook, thus allowing to set ->flowic_secid.
* pptp_xmit() now passes the pppox socket to xfrm_lookup_route().
Found by code inspection.
Fixes:
00959ade36ac ("PPTP: PPP over IPv4 (Point-to-Point Tunneling Protocol)")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Mon, 3 Jul 2023 15:24:52 +0000 (18:24 +0300)]
mlxsw: spectrum_router: Fix an IS_ERR() vs NULL check
The mlxsw_sp_crif_alloc() function returns NULL on error. It doesn't
return error pointers. Fix the check.
Fixes:
78126cfd5dc9 ("mlxsw: spectrum_router: Maintain CRIF for fallback loopback RIF")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Tue, 4 Jul 2023 18:22:50 +0000 (11:22 -0700)]
Merge tag 'pm-6.5-rc1-2' of git://git./linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These add support for new hardware (ap807 and AM62A7), fix several
issues in cpufreq drivers and in the operating performance points
(OPP) framework, fix up intel_idle after recent changes and add
documentation.
Specifics:
- Add missing __init annotation to one function in the intel_idle
drvier (Rafael Wysocki)
- Make intel_pstate use a correct scaling factor when mapping HWP
performance levels to frequency values on hybrid-capable systems
with disabled E-cores (Srinivas Pandruvada)
- Fix Kconfig dependencies of the cpufreq-dt-platform driver (Viresh
Kumar)
- Add support to build cpufreq-dt-platdev as a module (Zhipeng Wang)
- Don't allocate Sparc's cpufreq_driver dynamically (Viresh Kumar)
- Add support for TI's AM62A7 platform (Vibhore Vardhan)
- Add support for Armada's ap807 platform (Russell King (Oracle))
- Add support for StarFive JH7110 SoC (Mason Huo)
- Fix voltage selection for Mediatek Socs (Daniel Golle)
- Fix error handling in Tegra's cpufreq driver (Christophe JAILLET)
- Document Qualcomm's IPQ8074 in DT bindings (Robert Marko)
- Don't warn for disabling a non-existing frequency for imx6q cpufreq
driver (Christoph Niedermaier)
- Use dev_err_probe() in Qualcomm's cpufreq driver (Andrew Halaney)
- Simplify performance state related logic in the OPP core (Viresh
Kumar)
- Fix use-after-free and improve locking around lazy_opp_tables
(Viresh Kumar, Stephan Gerhold)
- Minor cleanups - using dev_err_probe() and rate-limiting debug
messages (Andrew Halaney, Adrián Larumbe)"
* tag 'pm-6.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
cpufreq: intel_pstate: Fix scaling for hybrid-capable systems with disabled E-cores
cpufreq: Make CONFIG_CPUFREQ_DT_PLATDEV depend on OF
intel_idle: Add __init annotation to matchup_vm_state_with_baremetal()
OPP: Properly propagate error along when failing to get icc_path
OPP: Use dev_err_probe() when failing to get icc_path
cpufreq: qcom-cpufreq-hw: Use dev_err_probe() when failing to get icc paths
cpufreq: mediatek: correct voltages for MT7622 and MT7623
cpufreq: armada-8k: add ap807 support
OPP: Simplify the over-designed pstate <-> level dance
OPP: pstate is only valid for genpd OPP tables
OPP: don't drop performance constraint on OPP table removal
OPP: Protect `lazy_opp_tables` list with `opp_table_lock`
OPP: Staticize `lazy_opp_tables` in of.c
cpufreq: dt-platdev: Support building as module
opp: Fix use-after-free in lazy_opp_tables after probe deferral
dt-bindings: cpufreq: qcom-cpufreq-nvmem: document IPQ8074
cpufreq: dt-platdev: Blacklist ti,am62a7 SoC
cpufreq: ti-cpufreq: Add support for AM62A7
OPP: rate-limit debug messages when no change in OPP is required
cpufreq: imx6q: don't warn for disabling a non-existing frequency
...
Linus Torvalds [Tue, 4 Jul 2023 18:07:45 +0000 (11:07 -0700)]
Merge tag 'clk-for-linus' of git://git./linux/kernel/git/clk/linux
Pull more clk updates from Stephen Boyd:
"Another set of clk driver updates and fixes for the merge window. The
driver updates needed more time to bake in linux-next.
Updates:
- Support for more clk controllers in Qualcomm SoCs such as SM8350,
SM8450, SDX75, SC8280XP, and IPQ9574
- Runtime PM enablement of some more Qualcomm clk controllers
- Various fixes to Qualcomm clk driver data to use correct clk_ops
and to check halt bits properly
- AT91 updates to modernize with clk_parent_data structures
Fixes:
- Remove 'syscon' from dt binding fix for ti,j721e-system-controller
- Fix determine rate in the Tegra driver that got wrecked by the
refactorting of muxes this merge window"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (69 commits)
clk: tegra: Avoid calling an uninitialized function
dt-bindings: mfd: ti,j721e-system-controller: Remove syscon from example
clk: at91: sama7g5: s/ep_chg_chg_id/ep_chg_id
clk: at91: sama7g5: switch to parent_hw and parent_data
clk: at91: sckc: switch to parent_data/parent_hw
clk: at91: clk-sam9x60-pll: add support for parent_hw
clk: at91: clk-utmi: add support for parent_hw
clk: at91: clk-system: add support for parent_hw
clk: at91: clk-programmable: add support for parent_hw
clk: at91: clk-peripheral: add support for parent_hw
clk: at91: clk-master: add support for parent_hw
clk: at91: clk-generated: add support for parent_hw
clk: at91: clk-main: add support for parent_data/parent_hw
clk: qcom: gcc-sc8280xp: Add runtime PM
clk: qcom: gpucc-sc8280xp: Add runtime PM
clk: qcom: mmcc-msm8974: fix MDSS_GDSC power flags
clk: qcom: gpucc-sm6375: Enable runtime pm
dt-bindings: clock: sm6375-gpucc: Add VDD_GX
clk: qcom: gcc-sm6115: Add missing PLL config properties
clk: qcom: clk-alpha-pll: Add a way to update some bits of test_ctl(_hi)
...
Linus Torvalds [Tue, 4 Jul 2023 18:02:34 +0000 (11:02 -0700)]
Merge tag 'firewire-6.5-rc1' of git://git./linux/kernel/git/ieee1394/linux1394
Pull firewire updates from Takashi Sakamoto:
"This consist of three parts; UAPI update, OHCI driver update, and
several bug fixes.
Firstly, the 1394 OHCI specification defines method to retrieve
hardware time stamps for asynchronous communication, which was
previously unavailable in user space. This adds new events to the
UAPI, allowing applications to retrieve the time when asynchronous
packet are received and sent. The new events are tested in the
bleeding edge of libhinawa and look to work well. The new version of
libhinawa will be released after current merge window is closed:
https://git.kernel.org/pub/scm/libs/ieee1394/libhinawa.git/
Secondly, the FireWire stack includes a PCM device driver for 1394
OHCI hardware, This change modernizes the driver by managed resource
(devres) framework.
Lastly, bug fixes for firewire-net and firewire-core"
* tag 'firewire-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: (25 commits)
firewire: net: fix use after free in fwnet_finish_incoming_packet()
firewire: core: obsolete usage of GFP_ATOMIC at building node tree
firewire: ohci: release buffer for AR req/resp contexts when managed resource is released
firewire: ohci: use devres for content of configuration ROM
firewire: ohci: use devres for IT, IR, AT/receive, and AT/request contexts
firewire: ohci: use devres for list of isochronous contexts
firewire: ohci: use devres for requested IRQ
firewire: ohci: use devres for misc DMA buffer
firewire: ohci: use devres for MMIO region mapping
firewire: ohci: use devres for PCI-related resources
firewire: ohci: use devres for memory object of ohci structure
firewire: fix warnings to generate UAPI documentation
firewire: fix build failure due to missing module license
firewire: cdev: implement new event relevant to phy packet with time stamp
firewire: cdev: add new event to notify phy packet with time stamp
firewire: cdev: code refactoring to dispatch event for phy packet
firewire: cdev: implement new event to notify response subaction with time stamp
firewire: cdev: add new event to notify response subaction with time stamp
firewire: cdev: code refactoring to operate event of response
firewire: core: implement variations to send request and wait for response with time stamp
...
Linus Torvalds [Tue, 4 Jul 2023 13:37:32 +0000 (06:37 -0700)]
module: fix init_module_from_file() error handling
Vegard Nossum pointed out two different problems with the error handling
in init_module_from_file():
(a) the idempotent loading code didn't clean up properly in some error
cases, leaving the on-stack 'struct idempotent' element still in
the hash table
(b) failure to read the module file would nonsensically update the
'invalid_kread_bytes' stat counter with the error value
The first error is quite nasty, in that it can then cause subsequent
idempotent loads of that same file to access stale stack contents of the
previous failure. The case may not happen in any normal situation
(explaining all the "Tested-by's on the original change), and requires
admin privileges, but syzkaller triggers random bad behavior as a
result:
BUG: soft lockup in sys_finit_module
BUG: unable to handle kernel paging request in init_module_from_file
general protection fault in init_module_from_file
INFO: task hung in init_module_from_file
KASAN: out-of-bounds Read in init_module_from_file
KASAN: slab-out-of-bounds Read in init_module_from_file
...
The second error is fairly benign and just leads to nonsensical stats
(and has been around since the debug stats were added).
Vegard also provided a patch for the idempotent loading issue, but I'd
rather re-organize the code and make it more legible using another level
of helper functions than add the usual "goto out" error handling.
Link: https://lore.kernel.org/lkml/20230704100852.23452-1-vegard.nossum@oracle.com/
Fixes:
9b9879fc0327 ("modules: catch concurrent module loads, treat them as idempotent")
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Reported-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reported-by: syzbot+9c2bdc9d24e4a7abe741@syzkaller.appspotmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rafael J. Wysocki [Tue, 4 Jul 2023 16:26:44 +0000 (18:26 +0200)]
Merge branches 'pm-cpufreq' and 'pm-cpuidle'
Merge CPU power management updates for 6.5-rc1:
- Add missing __init annotation to one function in the intel_idle
drvier (Rafael Wysocki).
- Make intel_pstate use a correct scaling factor when mapping HWP
performance levels to frequency values on hybrid-capable systems
with disabled E-cores (Srinivas Pandruvada).
- Fix Kconfig dependencies of the cpufreq-dt-platform driver (Viresh
Kumar).
- Add support to build cpufreq-dt-platdev as a module (Zhipeng Wang).
- Don't allocate Sparc's cpufreq_driver dynamically (Viresh Kumar).
- Add support for TI's AM62A7 platform (Vibhore Vardhan).
- Add support for Armada's ap807 platform (Russell King (Oracle)).
- Add support for StarFive JH7110 SoC (Mason Huo).
- Fix voltage selection for Mediatek Socs (Daniel Golle).
- Fix error handling in Tegra's cpufreq driver (Christophe JAILLET).
- Document Qualcomm's IPQ8074 in DT bindings (Robert Marko).
- Don't warn for disabling a non-existing frequency for imx6q cpufreq
driver (Christoph Niedermaier).
- Use dev_err_probe() in Qualcomm's cpufreq driver (Andrew Halaney).
* pm-cpufreq:
cpufreq: intel_pstate: Fix scaling for hybrid-capable systems with disabled E-cores
cpufreq: Make CONFIG_CPUFREQ_DT_PLATDEV depend on OF
cpufreq: qcom-cpufreq-hw: Use dev_err_probe() when failing to get icc paths
cpufreq: mediatek: correct voltages for MT7622 and MT7623
cpufreq: armada-8k: add ap807 support
cpufreq: dt-platdev: Support building as module
dt-bindings: cpufreq: qcom-cpufreq-nvmem: document IPQ8074
cpufreq: dt-platdev: Blacklist ti,am62a7 SoC
cpufreq: ti-cpufreq: Add support for AM62A7
cpufreq: imx6q: don't warn for disabling a non-existing frequency
cpufreq: sparc: Don't allocate cpufreq_driver dynamically
cpufreq: tegra194: Fix an error handling path in tegra194_cpufreq_probe()
cpufreq: dt-platdev: Add JH7110 SOC to the allowlist
* pm-cpuidle:
intel_idle: Add __init annotation to matchup_vm_state_with_baremetal()
Thierry Reding [Fri, 30 Jun 2023 13:07:48 +0000 (15:07 +0200)]
clk: tegra: Avoid calling an uninitialized function
Commit
493ffb046cf5 ("clk: tegra: super: Switch to determine_rate")
replaced clk_super_round_rate() by clk_super_determine_rate(), but
didn't update one callsite that was explicitly calling the old
tegra_clk_super_ops.round_rate() function, which was now NULL. This
resulted in a crash on Tegra30 systems during early boot.
Switch this callsite over to the clk_super_determine_rate() equivalent
to avoid the crash.
Fixes:
493ffb046cf5 ("clk: tegra: super: Switch to determine_rate")
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20230630130748.840729-1-thierry.reding@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Linus Torvalds [Tue, 4 Jul 2023 02:29:48 +0000 (19:29 -0700)]
mm: don't do validate_mm() unnecessarily and without mmap locking
This is an addition to commit
ae80b4041984 ("mm: validate the mm before
dropping the mmap lock"), because it turns out there were two problems,
but lockdep just stopped complaining after finding the first one.
The do_vmi_align_munmap() function now drops the mmap lock after doing
the validate_mm() call, but it turns out that one of the callers then
immediately calls validate_mm() again.
That's both a bit silly, and now (again) happens without the mmap lock
held.
So just remove that validate_mm() call from the caller, but make sure to
not lose any coverage by doing that mm sanity checking in the error path
of do_vmi_align_munmap() too.
Reported-and-tested-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/lkml/ZKN6CdkKyxBShPHi@xsang-OptiPlex-9020/
Fixes:
408579cd627a ("mm: Update do_vmi_align_munmap() return semantics")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lin Ma [Mon, 3 Jul 2023 11:08:42 +0000 (19:08 +0800)]
net/sched: act_pedit: Add size check for TCA_PEDIT_PARMS_EX
The attribute TCA_PEDIT_PARMS_EX is not be included in pedit_policy and
one malicious user could fake a TCA_PEDIT_PARMS_EX whose length is
smaller than the intended sizeof(struct tc_pedit). Hence, the
dereference in tcf_pedit_init() could access dirty heap data.
static int tcf_pedit_init(...)
{
// ...
pattr = tb[TCA_PEDIT_PARMS]; // TCA_PEDIT_PARMS is included
if (!pattr)
pattr = tb[TCA_PEDIT_PARMS_EX]; // but this is not
// ...
parm = nla_data(pattr);
index = parm->index; // parm is able to be smaller than 4 bytes
// and this dereference gets dirty skb_buff
// data created in netlink_sendmsg
}
This commit adds TCA_PEDIT_PARMS_EX length in pedit_policy which avoid
the above case, just like the TCA_PEDIT_PARMS.
Fixes:
71d0ed7079df ("net/act_pedit: Support using offset relative to the conventional network headers")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Link: https://lore.kernel.org/r/20230703110842.590282-1-linma@zju.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>