drm/amd/display: Add missing kdoc entries in update_planes_and_stream_adapter

Fixes the following gcc with W=1:

drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:374: warning: Function parameter or member 'dc' not described in 'update_planes_and_stream_adapter'
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:374: warning: Function parameter or member 'update_type' not described in 'update_planes_and_stream_adapter'
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:374: warning: Function parameter or member 'planes_count' not described in 'update_planes_and_stream_adapter'
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:374: warning: Function parameter or member 'stream' not described in 'update_planes_and_stream_adapter'
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:374: warning: Function parameter or member 'stream_update' not described in 'update_planes_and_stream_adapter'
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:374: warning: Function parameter or member 'array_of_surface_update' not described in 'update_planes_and_stream_adapter'

Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix create_dmamap_sg_bo kdoc warnings

Fix the following gcc with W=1:

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c:292: warning: Cannot understand  * @create_dmamap_sg_bo: Creates a amdgpu_bo object to reflect information

Cc: Felix Kuehling <felix.kuehling@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Fix MEC pipe interrupt enablement

for_each_inst modifies xcc_mask and therefore the loop doesn't
initialize properly interrupts on all pipes. Keep looping through xcc as
the outer loop to fix this issue.

Fixes: c4050ff1a43e ("drm/amdkfd: Use xcc mask for identifying xcc")
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Add new gfx_target_versions for GC 9.4.3

For GC 9.4.3, set gfx_target_version to 90402 for rev 1 and later (APU
or dGPU), 90401 for rev 0 dGPU, and 90400 for rev 0 APU.

Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Acked-by: Alex Deucher <Alexander.Deucher@amd.com>
Reviewed-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix up missing kdoc in sdma_v6_0.c

Address a bunch of kdoc warnings:

gcc with W=1
drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:248: warning: Function parameter or member 'job' not described in 'sdma_v6_0_ring_emit_ib'
drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:248: warning: Function parameter or member 'flags' not described in 'sdma_v6_0_ring_emit_ib'
drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:946: warning: Function parameter or member 'timeout' not described in 'sdma_v6_0_ring_test_ib'
drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:1125: warning: Function parameter or member 'ring' not described in 'sdma_v6_0_ring_pad_ib'
drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:1176: warning: Function parameter or member 'vmid' not described in 'sdma_v6_0_ring_emit_vm_flush'
drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:1176: warning: Function parameter or member 'pd_addr' not described in 'sdma_v6_0_ring_emit_vm_flush'

Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix up kdoc in amdgpu_acpi.c

Fix these warnings by adding & deleting the deviant arguments.

gcc with W=1
drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:906: warning: Function parameter or member 'numa_info' not described in 'amdgpu_acpi_get_node_id'
drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:906: warning: Excess function parameter 'nid' description in 'amdgpu_acpi_get_node_id'

Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix up kdoc in sdma_v4_4_2.c

Address a bunch of kdoc warnings:

gcc with W=1
drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:426: warning: Function parameter or member 'inst_mask' not described in 'sdma_v4_4_2_inst_gfx_stop'
drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:457: warning: Function parameter or member 'inst_mask' not described in 'sdma_v4_4_2_inst_rlc_stop'
drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:470: warning: Function parameter or member 'inst_mask' not described in 'sdma_v4_4_2_inst_page_stop'
drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:506: warning: Function parameter or member 'inst_mask' not described in 'sdma_v4_4_2_inst_ctx_switch_enable'
drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:794: warning: Function parameter or member 'inst_mask' not described in 'sdma_v4_4_2_inst_rlc_resume'
drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:810: warning: Function parameter or member 'inst_mask' not described in 'sdma_v4_4_2_inst_load_microcode'
drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:854: warning: Function parameter or member 'inst_mask' not described in 'sdma_v4_4_2_inst_start'

Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable tmz by default for GC 11.0.1

Add IP GC 11.0.1 in the list of target to have
tmz enabled by default.

Signed-off-by: Ikshwaku Chauhan <ikshwaku.chauhan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: fix gfx_target_version for certain 11.0.3 devices

Certain boards with GC IP 11.0.3 need slightly different handling
in the shader compiler due to board specific bounding box
optimizations.

Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: keep irq count in amdgpu_irq_disable_all

This can clean up all irq warnings because of unbalanced
amdgpu_irq_get/put when unplugging/unbinding device, and leave
irq count decrease in each ip fini function.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Fix up locking etc in amdgpu_debugfs_gprwave_ioctl()

There are two bugs here.
1) Drop the lock if copy_from_user() fails.
2) If the copy fails then the correct error code is -EFAULT instead of
   -EINVAL.

I also broke up the long line and changed "sizeof rd->id" to
"sizeof(rd->id)".

Fixes: 553f973a0d7b ("drm/amd/amdgpu: Update debugfs for XCC support (v3)")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove unused definition

Eliminate the following warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn201/dcn201_resource.c:899:43: warning: unused variable 'res_create_maximus_funcs'

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5296
Fixes: 25879d7b4986 ("drm/amd/display: Clean FPGA code in dc")
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use amdxcp platform device as spatial partition

Use amdxcp platform device as spatial partition device.

-v2: remove unused variable

Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove unused definition

Eliminate the following warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_resource.c:1390:43: warning: unused variable 'res_create_maximus_funcs'

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5296
Fixes: 25879d7b4986 ("drm/amd/display: Clean FPGA code in dc")
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdxcp: add platform device driver for amdxcp

Add platform device driver for amdxcp to support
amdgpu spatial partition.

-v2: fix build warning

Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Mark mmhub_v1_8_mmea_err_status_reg as __maybe_unused

Silencing the compiler from below compilation error:

drivers/gpu/drm/amd/amdgpu/mmhub_v1_8.c:704:23: error: variable 'mmhub_v1_8_mmea_err_status_reg' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration]
static const uint32_t mmhub_v1_8_mmea_err_status_reg[] = {
                      ^
1 error generated.

Mark the variable as __maybe_unused to make it clear to clang that this
is expected, so there is no more warning.

Cc: Christian König <christian.koenig@amd.com>
Cc: Lijo Lazar <lijo.lazar@amd.com>
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove unused definition

Eliminate the following warnings:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn321/dcn321_resource.c:1346:43: warning: unused variable 'res_create_maximus_funcs'
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn321/dcn321_resource.c:735:38: warning: unused variable 'debug_defaults_diags'

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5296
Fixes: 25879d7b4986 ("drm/amd/display: Clean FPGA code in dc")
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: clean up some inconsistent indenting

No functional modification involved.

drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn321/dcn321_fpu.c:556 dcn321_update_bw_bounding_box_fpu() warn: inconsistent indenting.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5304
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove unused definition

Eliminate the following warnings:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn316/dcn316_resource.c:1355:43: warning: unused variable 'res_create_maximus_funcs'
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn316/dcn316_resource.c:899:38: warning: unused variable 'debug_defaults_diags'

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5296
Fixes: 25879d7b4986 ("drm/amd/display: Clean FPGA code in dc")
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: clean up some inconsistent indenting

No functional modification involved.

drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn314/dcn314_fpu.c:269 dcn314_update_bw_bounding_box_fpu() warn: inconsistent indenting.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5305
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove unused definition

Eliminate the following warnings:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn315/dcn315_resource.c:1357:43: warning: unused variable 'res_create_maximus_funcs'
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn315/dcn315_resource.c:893:38: warning: unused variable 'debug_defaults_diags'

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5296
Fixes: 25879d7b4986 ("drm/amd/display: Clean FPGA code in dc")
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove unused definition

Eliminate the following warnings:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn302/dcn302_resource.c:957:43: warning: unused variable 'res_create_maximus_funcs'
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn302/dcn302_resource.c:101:38: warning: unused variable 'debug_defaults_diags'

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5296
Fixes: 25879d7b4986 ("drm/amd/display: Clean FPGA code in dc")
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove unused definition

Eliminate the following warnings:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn303/dcn303_resource.c:884:43: warning: unused variable 'res_create_maximus_funcs'
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn303/dcn303_resource.c:84:38: warning: unused variable 'debug_defaults_diags'

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5296
Fixes: 25879d7b4986 ("drm/amd/display: Clean FPGA code in dc")
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add the accelerator pcie class

v2: add the base class id for accelerator (lijo)
v3: add the new pci class in amdgpu tree (hawking)

Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: save/restore part of xcp drm_device fields

Redirect xcp allocated drm_device::rdev/pdev/driver with
amdgpu pci_device/drm_device setting. They need be saved
before redirect and restored after unregister xcp drm_device.

-v2: fix warning discarded-qualifiers

Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: set the APU flag based on package type

Since currently APU and dGPU share the same pcie class
while gmc init needs the flag to set up correctly for upcomming
memory allocations

v2: call get_pkg_type in smuio 13_0_3 is enough (hawking)

Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/jpeg: add init value for num_jpeg_rings

Need init new num_jpeg_rings to 1 on jpeg.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Richard Liang <rliang1@amd.com>
Tested-by: Ying Li <ying.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: complement the 4, 6 and 8 XCC cases

Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: golden settings for ASIC rev_id 0

Suggested by FW team that GB_ADDR_CONFIG is handled by golden
settings in driver to get the expected value

Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: bypass bios dependent operations

Since bios reading does not work currently so just bypass all operations
related to bios

v2: hardcode the vram info for APP_APU case (hawking)
v3: correct the vram_width with channel number * channel size (lijo)

Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Program gds backup address as zero if no gds allocated

It is firmware requirement to set gds_backup_addrlo and gds_backup_addrhi
of DE meta both zero if no gds partition is allocated for the frame.

Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Reset CP_VMID_PREEMPT after trailing fence signaled

When MEC executes unmap_queue for mid command buffer preemption, it will
kick the write pointer of the gfx ring, set CP_VMID_PREEMPT to trigger the
preemption and wait for CP_VMID_PREEMPT becomes zero after the preemption
done. There is a race condition that PFP may excute the resetting command
before MEC set CP_VMID_PREEMPT. As a result, hang happens as
CP_VMID_PREEMPT is always 0xffff.

To avoid this, we send resetting CP_VMID_PREEMPT command after the trailing
fence is siganled and update gfx write pointer explicitly.

Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove unused definition

Eliminate the following warnings:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn301/dcn301_resource.c:1050:43: warning: unused variable 'res_create_maximus_funcs'
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn301/dcn301_resource.c:705:38: warning: unused variable 'debug_defaults_diags'

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5296
Fixes: 25879d7b4986 ("drm/amd/display: Clean FPGA code in dc")
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove unused definition

Eliminate the following warnings:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_resource.c:1360:43: warning: unused variable 'res_create_maximus_funcs'
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_resource.c:737:38: warning: unused variable 'debug_defaults_diags'

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5296
Fixes: 25879d7b4986 ("drm/amd/display: Clean FPGA code in dc")
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix unused variable in amdgpu_gfx.c

drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c: In function ‘amdgpu_gfx_disable_kcq’:
drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c:497:6: warning: variable ‘j’ set but not used [-Wunused-but-set-variable]
  497 |  int j;
      |      ^
drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c: In function ‘amdgpu_gfx_disable_kgq’:
drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c:528:6: warning: variable ‘j’ set but not used [-Wunused-but-set-variable]
  528 |  int j;
      |      ^
drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c: In function ‘amdgpu_gfx_enable_kgq’:
drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c:630:12: warning: variable ‘j’ set but not used [-Wunused-but-set-variable]
  630 |  int r, i, j;
      |

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix defined but not used gfx9_cs_data in gfx_v9_4_3.c

gcc with W=1
In file included from drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c:33:
drivers/gpu/drm/amd/amdgpu/clearstate_gfx9.h:939:36: warning: ‘gfx9_cs_data’ defined but not used [-Wunused-const-variable=]
  939 | static const struct cs_section_def gfx9_cs_data[] = {
      |

gfx9_cs_data is not used in gfx_v9_4_3.c, hence remove its
include in gfx_v9_4_3.c

Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix return types of certain NBIOv7.9 callbacks

When building with clang's -Wincompatible-function-pointer-types-strict,
which ensures that function pointer signatures match exactly to avoid
tripping clang's Control Flow Integrity (kCFI) checks at run time and
will eventually be turned on for the kernel, the following instances
appear in the NBIOv7.9 code:

  drivers/gpu/drm/amd/amdgpu/nbio_v7_9.c:465:32: error: incompatible function pointer types initializing 'int (*)(struct amdgpu_device *)' with an expression of type 'enum amdgpu_gfx_partition (struct amdgpu_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
          .get_compute_partition_mode = nbio_v7_9_get_compute_partition_mode,
                                        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  drivers/gpu/drm/amd/amdgpu/nbio_v7_9.c:467:31: error: incompatible function pointer types initializing 'u32 (*)(struct amdgpu_device *, u32 *)' (aka 'unsigned int (*)(struct amdgpu_device *, unsigned int *)') with an expression of type 'enum amdgpu_memory_partition (struct amdgpu_device *, u32 *)' (aka 'enum amdgpu_memory_partition (struct amdgpu_device *, unsigned int *)') [-Werror,-Wincompatible-function-pointer-types-strict]
          .get_memory_partition_mode = nbio_v7_9_get_memory_partition_mode,
                                       ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  2 errors generated.

Change the return types of these callbacks to match the prototypes to
clear up the warning and avoid tripping kCFI at run time. Both functions
return a value from ffs(), which is an integer that can fit into either
int or unsigned int.

Fixes: 98a54e88e87f ("drm/amdgpu: add sysfs node for compute partition mode")
Fixes: ea2d2f8ececd ("drm/amdgpu: detect current GPU memory partition mode")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove unused definition

Eliminate the following warnings:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn31/dcn31_resource.c:1356:43: warning: unused variable 'res_create_maximus_funcs'
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn31/dcn31_resource.c:894:38: warning: unused variable 'debug_defaults_diags'

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5296
Fixes: 25879d7b4986 ("drm/amd/display: Clean FPGA code in dc")
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Drop debugfs access to the DPCD

There is already access to the DPCD from userspace through
`CONFIG_DRM_DP_AUX_CHARDEV`, so it's unnecessary to reinvent the wheel
with a set of extra debugfs nodes specific to amdgpu.

The character device interface behaves more like you would expect in that
you can seek/read/write all from the same file.

Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove unused definition

Eliminate the following warnings:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_resource.c:1079:43: warning: unused variable 'res_create_maximus_funcs'
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_resource.c:731:38: warning: unused variable 'debug_defaults_diags'

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5296
Fixes: 25879d7b4986 ("drm/amd/display: Clean FPGA code in dc")
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove unused definition

Eliminate the following warnings:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn21/dcn21_resource.c:1222:43: warning: unused variable 'res_create_maximus_funcs'
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn21/dcn21_resource.c:658:38: warning: unused variable 'debug_defaults_diags'

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5296
Fixes: 25879d7b4986 ("drm/amd/display: Clean FPGA code in dc")
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove unused definition

Eliminate the following warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_resource.c:889:43: warning: unused variable 'res_create_maximus_funcs'

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5296
Fixes: 25879d7b4986 ("drm/amd/display: Clean FPGA code in dc")
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Use single copy per SDMA instance type (v2)

v1: Only single copy per instance type is required for PSP. All instance types
use the same firmware copy. (Lijo)

v2: Apply the change into amdgpu_sdma_init_microcode() due to rebase. (Morris)

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: switch to unified amdgpu_ring_test_helper

This will simplify code.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx: set sched.ready status after ring/IB test in gfx

sched.ready is nothing with ring initialization, it needs to set
to be true after ring/IB test in amdgpu_ring_test_helper to tell
the ring is ready for submission.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/sdma: set sched.ready status after ring/IB test in sdma

sched.ready is nothing with ring initialization, it needs to set
to be true after ring/IB test in amdgpu_ring_test_helper to tell
the ring is ready for submission.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: resolve reboot exception for si oland

During reboot test on arm64 platform, it may failure on boot.

The error message are as follows:
[    1.706570][ 3] [  T273] [drm:si_thermal_enable_alert [amdgpu]] *ERROR* Could not enable thermal interrupts.
[    1.716547][ 3] [  T273] [drm:amdgpu_device_ip_late_init [amdgpu]] *ERROR* late_init of IP block <si_dpm> failed -22
[    1.727064][ 3] [  T273] amdgpu 0000:02:00.0: amdgpu_device_ip_late_init failed
[    1.734367][ 3] [  T273] amdgpu 0000:02:00.0: Fatal error during GPU init

v2: squash in built warning fix (Alex)

Signed-off-by: Zhenneng Li <lizhenneng@kylinos.cn>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix warnings

Fix warnings reported by kernel test bot/smatch

smatch warnings:
drivers/gpu/drm/amd/amdgpu/amdgpu_xcp.c:65 amdgpu_xcp_run_transition()
error: buffer overflow 'xcp_mgr->xcp' 8 <= 8

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/202305231453.I0bXngYn-lkp@intel.com/
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: reverse mclk and fclk clocks levels for renoir

This patch reverses the DPM clocks levels output of pp_dpm_mclk
and pp_dpm_fclk for renoir.

On dGPUs and older APUs we expose the levels from lowest clocks
to highest clocks. But for some APUs, the clocks levels are
given the reversed orders by PMFW. Like the memory DPM clocks
that are exposed by pp_dpm_mclk.

It's not intuitive that they are reversed on these APUs. All tools
and software that talks to the driver then has to know different ways
to interpret the data depending on the asic.

So we need to reverse them to expose the clocks levels from the
driver consistently.

Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Set event interrupt class for GFX 9.4.3

Fix the warning during driver load because the event
interrupt class is not set for GFX9.4.3.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amd/display: Do not set drr on pipe commit"

This reverts commit e101bf95ea87ccc03ac2f48dfc0757c6364ff3c7.

Caused a regression:

Samsung Odyssey Neo G9, running at 5120x1440@240/VRR, connected to Navi
21 via DisplayPort, blanks and the GPU hangs while starting the Steam
game Assetto Corsa Competizione (via Proton 7.0).

Example dmesg excerpt:

 amdgpu 0000:0c:00.0: [drm] ERROR [CRTC:82:crtc-0] flip_done timed out
 NMI watchdog: Watchdog detected hard LOCKUP on cpu 6
 [...]
 RIP: 0010:amdgpu_device_rreg.part.0+0x2f/0xf0 [amdgpu]
 Code: 41 54 44 8d 24 b5 00 00 00 00 55 89 f5 53 48 89 fb 4c 3b a7 60 0b 00 00 73 6a 83 e2 02 74 29 4c 03 a3 68 0b 00 00 45 8b 24 24 <48> 8b 43 08 0f b7 70 3e 66 90 44 89 e0 5b 5d 41 5c 31 d2 31 c9 31
 RSP: 0000:ffffb39a119dfb88 EFLAGS: 00000086
 RAX: ffffffffc0eb96a0 RBX: ffff9e7963dc0000 RCX: 0000000000007fff
 RDX: 0000000000000000 RSI: 0000000000004ff6 RDI: ffff9e7963dc0000
 RBP: 0000000000004ff6 R08: ffffb39a119dfc40 R09: 0000000000000010
 R10: ffffb39a119dfc40 R11: ffffb39a119dfc44 R12: 00000000000e05ae
 R13: 0000000000000000 R14: ffff9e7963dc0010 R15: 0000000000000000
 FS:  000000001012f6c0(0000) GS:ffff9e805eb80000(0000) knlGS:000000007fd40000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00000000461ca000 CR3: 00000002a8a20000 CR4: 0000000000350ee0
 Call Trace:
  <TASK>
  dm_read_reg_func+0x37/0xc0 [amdgpu]
  generic_reg_get2+0x22/0x60 [amdgpu]
  optc1_get_crtc_scanoutpos+0x6a/0xc0 [amdgpu]
  dc_stream_get_scanoutpos+0x74/0x90 [amdgpu]
  dm_crtc_get_scanoutpos+0x82/0xf0 [amdgpu]
  amdgpu_display_get_crtc_scanoutpos+0x91/0x190 [amdgpu]
  ? dm_read_reg_func+0x37/0xc0 [amdgpu]
  amdgpu_get_vblank_counter_kms+0xb4/0x1a0 [amdgpu]
  dm_pflip_high_irq+0x213/0x2f0 [amdgpu]
  amdgpu_dm_irq_handler+0x8a/0x200 [amdgpu]
  amdgpu_irq_dispatch+0xd4/0x220 [amdgpu]
  amdgpu_ih_process+0x7f/0x110 [amdgpu]
  amdgpu_irq_handler+0x1f/0x70 [amdgpu]
  __handle_irq_event_percpu+0x46/0x1b0
  handle_irq_event+0x34/0x80
  handle_edge_irq+0x9f/0x240
  __common_interrupt+0x66/0x110
  common_interrupt+0x5c/0xd0
  asm_common_interrupt+0x22/0x40

Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Fix warnings in amdgpu_irq.c

checkpatch reports:

WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: braces {} are not necessary for any arm of this statement
+               if (nvec <= 0) {
[...]
+               } else {
[...]
WARNING: Block comments use a trailing */ on a separate line

Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amd/display: Block optimize on consecutive FAMS enables"

This reverts commit 751e17147953bc30036b8fe0eaaf780b6951404c.

It depends on its parent commit, which we want to revert.

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
[Hamza: fix a whitespace issue in dcn30_prepare_bandwidth()]
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add a low priority scheduler for VRAM clearing

Add a low priority DRM scheduler for VRAM clearing instead of using
the exisiting high priority scheduler. Use the high priority scheduler
for migrations and evictions.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: Modify mismatched function name

No functional modification involved.

drivers/gpu/drm/amd/amdgpu/vcn_v4_0_3.c:374: warning: expecting prototype for vcn_v4_0_mc_resume_dpg_mode(). Prototype was for vcn_v4_0_3_mc_resume_dpg_mode() instead.
drivers/gpu/drm/amd/amdgpu/vcn_v4_0_3.c:631: warning: expecting prototype for vcn_v4_0_enable_clock_gating(). Prototype was for vcn_v4_0_3_enable_clock_gating() instead.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=5284
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Modify mismatched function name

No functional modification involved.

drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:426: warning: expecting prototype for sdma_v4_4_2_gfx_stop(). Prototype was for sdma_v4_4_2_inst_gfx_stop() instead.
drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:457: warning: expecting prototype for sdma_v4_4_2_rlc_stop(). Prototype was for sdma_v4_4_2_inst_rlc_stop() instead.
drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:470: warning: expecting prototype for sdma_v4_4_2_page_stop(). Prototype was for sdma_v4_4_2_inst_page_stop() instead.
drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:506: warning: expecting prototype for sdma_v4_4_2_ctx_switch_enable(). Prototype was for sdma_v4_4_2_inst_ctx_switch_enable() instead.
drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:561: warning: expecting prototype for sdma_v4_4_2_enable(). Prototype was for sdma_v4_4_2_inst_enable() instead.
drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:798: warning: expecting prototype for sdma_v4_4_2_rlc_resume(). Prototype was for sdma_v4_4_2_inst_rlc_resume() instead.
drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:814: warning: expecting prototype for sdma_v4_4_2_load_microcode(). Prototype was for sdma_v4_4_2_inst_load_microcode() instead.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=5283
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Remove duplicate include

./drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c: amdgpu_xcp.h is included more than once.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=5281
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove unused variables res_create_maximus_funcs and debug_defaults_diags

gcc with W=1 reports
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_resource.c:1069:43: error:
  ‘res_create_maximus_funcs’ defined but not used [-Werror=unused-const-variable=]
 1069 | static const struct resource_create_funcs res_create_maximus_funcs = {
      |                                           ^~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_resource.c:727:38: error:
  ‘debug_defaults_diags’ defined but not used [-Werror=unused-const-variable=]
  727 | static const struct dc_debug_options debug_defaults_diags = {
      |                                      ^~~~~~~~~~~~~~~~~~~~

These variables are not used so remove them.

Fixes: 25879d7b4986 ("drm/amd/display: Clean FPGA code in dc")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: avoid calling missing .resync_fifo_dccg_dio()

The .resync_fifo_dccg_dio() callback pointer was added in an #ifdef block,
but is called unconditionally:

drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_hw_sequencer.c:2292:31: error: 'struct hwseq_private_funcs' has no member named 'resync_fifo_dccg_dio'

Add the same #ifdef around the caller as well.

Fixes: 3e8d74cb128f ("drm/amd/display: Trigger DIO FIFO resync on commit streams")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Align partition memory size to page size

The compute partition memory size calculated from KFD_XCP_MEMORY_SIZE
may not align to page size if xcp_mgr->num_xcp_per_mem_partition is 6.

Change the KFD_XCP_MEMORY_SIZE macro to return page align size, so KFD
node memory size reported in sysfs is page align size, to avoid
application VRAM allocation failure because application may use the size
directly and Thunk requires the memory allocation size is page size
align.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: reverse mclk and fclk clocks levels for vangogh

This patch reverses the DPM clocks levels output of pp_dpm_mclk
and pp_dpm_fclk.

On dGPUs and older APUs we expose the levels from lowest clocks
to highest clocks. But for some APUs, the clocks levels that from
the DFPstateTable are given the reversed orders by PMFW. Like the
memory DPM clocks that are exposed by pp_dpm_mclk.

It's not intuitive that they are reversed on these APUs. All tools
and software that talks to the driver then has to know different ways
to interpret the data depending on the asic.

So we need to reverse them to expose the clocks levels from the
driver consistently.

Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: reverse mclk and fclk clocks levels for yellow carp

This patch reverses the DPM clocks levels output of pp_dpm_mclk
and pp_dpm_fclk.

On dGPUs and older APUs we expose the levels from lowest clocks
to highest clocks. But for some APUs, the clocks levels that from
the DFPstateTable are given the reversed orders by PMFW. Like the
memory DPM clocks that are exposed by pp_dpm_mclk.

It's not intuitive that they are reversed on these APUs. All tools
and software that talks to the driver then has to know different ways
to interpret the data depending on the asic.

So we need to reverse them to expose the clocks levels from the
driver consistently.

Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: reverse mclk clocks levels for SMU v13.0.5

This patch reverses the DPM clocks levels output of pp_dpm_mclk.

On dGPUs and older APUs we expose the levels from lowest clocks
to highest clocks. But for some APUs, the clocks levels that from
the DFPstateTable are given the reversed orders by PMFW. Like the
memory DPM clocks that are exposed by pp_dpm_mclk.

It's not intuitive that they are reversed on these APUs. All tools
and software that talks to the driver then has to know different ways
to interpret the data depending on the asic.

So we need to reverse them to expose the clocks levels from the
driver consistently.

Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: reverse mclk and fclk clocks levels for SMU v13.0.4

This patch reverses the DPM clocks levels output of pp_dpm_mclk
and pp_dpm_fclk.

On dGPUs and older APUs we expose the levels from lowest clocks
to highest clocks. But for some APUs, the clocks levels that from
the DFPstateTable are given the reversed orders by PMFW. Like the
memory DPM clocks that are exposed by pp_dpm_mclk.

It's not intuitive that they are reversed on these APUs. All tools
and software that talks to the driver then has to know different ways
to interpret the data depending on the asic.

So we need to reverse them to expose the clocks levels from the
driver consistently.

Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove unused variable num_xcc

gcc with W=1 reports
drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c:2138:13: error: variable
  ‘num_xcc’ set but not used [-Werror=unused-but-set-variable]
 2138 |         int num_xcc;
      |             ^~~~~~~

This variable is not used so remove it.

Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix acpi build warnings

Two newly introduced functions are in the global namespace but have no prototypes
or callers outside of amdgpu_acpi.c, another function is static but only has
a caller inside of an #ifdef:

drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:902:13: error: no previous prototype for 'amdgpu_acpi_get_node_id' [-Werror=missing-prototypes]
drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:928:30: error: no previous prototype for 'amdgpu_acpi_get_dev' [-Werror=missing-prototypes]
drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:860:33: error: 'amdgpu_acpi_get_numa_info' defined but not used [-Werror=unused-function]

Avoid the warnings by marking all of them static and ensuring that the compiler is
able to see the callsites.

v2: rebase on latest code (Alex)

Fixes: fa0497c34eb7 ("drm/amdgpu: Add API to get numa information of XCC")
Fixes: 1cc823011a23 ("drm/amdgpu: Store additional numa node information")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use %pad format string for dma_addr_t

DMA addresses can be shorter than u64, which results in a broken debug output:

drivers/gpu/drm/amd/amdgpu/amdgpu_gart.c: In function 'amdgpu_gart_table_ram_alloc':
drivers/gpu/drm/amd/amdgpu/amdgpu.h:41:22: error: format '%llx' expects argument of type 'long long unsigned int', but argument 4 has type 'dma_addr_t' {aka 'unsigned int'} [-Werror=format=]
drivers/gpu/drm/amd/amdgpu/amdgpu_gart.c:146:9: note: in expansion of macro 'dev_info'
  146 |         dev_info(adev->dev, "%s dma_addr:%llx\n", __func__, dma_addr);

Use the special %pad format string and pass the DMA address by reference.

Fixes: c9a502e981a9 ("drm/amdgpu: Allocate GART table in RAM for AMD APU")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:mark aqua_vanjaram_reg_init.c function as static

A few newly added global functions have no prototype, which causes warnings:

drivers/gpu/drm/amd/amdgpu/aqua_vanjaram_reg_init.c:169:5: error: no previous prototype for 'aqua_vanjaram_select_scheds' [-Werror=missing-prototypes]
drivers/gpu/drm/amd/amdgpu/aqua_vanjaram_reg_init.c:310:5: error: no previous prototype for '__aqua_vanjaram_get_xcc_per_xcp' [-Werror=missing-prototypes]
drivers/gpu/drm/amd/amdgpu/aqua_vanjaram_reg_init.c:337:5: error: no previous prototype for '__aqua_vanjaram_get_xcp_ip_info' [-Werror=missing-prototypes]
drivers/gpu/drm/amd/amdgpu/aqua_vanjaram_reg_init.c:593:5: error: no previous prototype for 'aqua_vanjaram_get_xcp_ip_details' [-Werror=missing-prototypes]

There are no callers from other files, so just mark them as 'static'.

Fixes: cd7d8400aa04 ("drm/amdgpu: add partition schedule for GC(9, 4, 3)")
Fixes: 9cb18287d8f1 ("drm/amdgpu: Add SOC partition funcs for GC v9.4.3")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: mark local functions as static

The file was newly added and causes some -Wmissing-prototype warnings:

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gc_9_4_3.c:57:5: error: no previous prototype for 'kgd_gfx_v9_4_3_hqd_sdma_load' [-Werror=missing-prototypes]
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gc_9_4_3.c:126:5: error: no previous prototype for 'kgd_gfx_v9_4_3_hqd_sdma_dump' [-Werror=missing-prototypes]
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gc_9_4_3.c:163:6: error: no previous prototype for 'kgd_gfx_v9_4_3_hqd_sdma_is_occupied' [-Werror=missing-prototypes]
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gc_9_4_3.c:181:5: error: no previous prototype for 'kgd_gfx_v9_4_3_hqd_sdma_destroy' [-Werror=missing-prototypes]

Mark these all as 'static' since there are no outside callers.

Fixes: a805889a1531 ("drm/amdkfd: Update SDMA queue management for GFX9.4.3")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: mark irq functions as 'static'

Two newly added functions cause a warning because they lack a prototype:

drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/smu_v13_0_6_ppt.c:1328:5: error: no previous prototype for 'smu_v13_0_6_set_irq_state' [-Werror=missing-prototypes]
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/smu_v13_0_6_ppt.c:1368:5: error: no previous prototype for 'smu_v13_0_6_register_irq_handler' [-Werror=missing-prototypes]

They are only used locally, so just mark them static.

Fixes: 676915e4108f ("drm/amd/pm: Add ih for SMU v13.0.6 thermal throttling")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix unsigned comparison with zero in gmc_v9_0_process_interrupt()

Smatch warns:
drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c:579:
unsigned 'xcc_id' is never less than zero.

gfx_v9_4_3_ih_to_xcc_inst() returns negative numbers as well.
Fix this by changing type of xcc_id to int.

Fixes: 98b2e9cad227 ("drm/amdgpu: correct the vmhub index when page fault occurs")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix a couple of spelling mistakes in info and debug messages

There are a couple of spelling mistakes, one in a dev_info message
and the other in a dev_debug message. Fix them.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Fix output of pp_od_clk_voltage

Printing the other clock types should not be conditioned on being able
to print OD_SCLK. Some GPUs currently have limited capability of only
printing a subset of these.

Since this condition was introduced in v5.18-rc1, reading from
`pp_od_clk_voltage` has been returning empty on the Asus ROG Strix G15
(2021).

Fixes: 79c65f3fcbb1 ("drm/amd/pm: do not expose power implementation details to amdgpu_pm.c")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Jonatas Esteves <jntesteves@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Disable interrupt tracker on NBIOv7.9

Enabling nBIF interrupt history tracker prevents LCLK deep sleep,
hence disable it

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: add missing NotifyPowerSource message mapping for SMU13.0.7

Otherwise, the power source switching will fail due to message
unavailable.

Fixes: bf4823267a81 ("drm/amd/pm: fix possible power mode mismatch between driver and PMFW")
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: fix possible division-by-zero errors

Function rv740_get_decoded_reference_divider() may return 0 due to
unpredictable reference divider value calculated in
radeon_atom_get_clock_dividers(). This will lead to
division-by-zero error once that value is used as a divider
in calculating 'clk_s'.
While unlikely, this issue should nonetheless be prevented so add a
sanity check for such cases by testing 'decoded_ref' value against 0.

Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.

v2: minor coding style fixes (Alex)
In practice this should actually happen as the vbios should be
properly populated.

Fixes: 66229b200598 ("drm/radeon/kms: add dpm support for rv7xx (v4)")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: stop including swiotlb.h

radeon does not need swiotlb.h, so stop including it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: init the XCC_DOORBELL_FENCE regs

add the the init_registers callback for nbio_v7_9

Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove unused definition

mmhub_v1_8_mmea_cgtt_clk_cntl_reg is defined but not used.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix uninitialized variable in gfxhub_v1_2_xcp_resume

drivers/gpu/drm/amd/amdgpu/gfxhub_v1_2.c:657:6: error: variable 'ret' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized]
        if (!amdgpu_sriov_vf(adev))
            ^~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfxhub_v1_2.c:660:9: note: uninitialized use occurs here
        return ret;
               ^~~
drivers/gpu/drm/amd/amdgpu/gfxhub_v1_2.c:657:2: note: remove the 'if' if its condition is always true
        if (!amdgpu_sriov_vf(adev))
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfxhub_v1_2.c:648:9: note: initialize the variable 'ret' to silence this warning
        int ret;
               ^
                = 0
1 error generated.

Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Lijo Lazar <lijo.lazar@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix unused amdgpu_acpi_get_numa_info function in amdgpu_acpi_get_node_id()

Fix the below compiler complaining error:

drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:860:33: error: unused function 'amdgpu_acpi_get_numa_info' [-Werror,-Wunused-function]
static struct amdgpu_numa_info *amdgpu_acpi_get_numa_info(uint32_t pxm)
                                ^
1 error generated.

By guarding amdgpu_acpi_get_numa_info & amdgpu_acpi_get_numa_size
function, only when CONFIG_ACPI_NUMA is enabled.

Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Lijo Lazar <lijo.lazar@amd.com>
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.237

This version brings along following fixes:
- Improve the message printed
- Disable dcn315 pixel rate crb when scaling
- Update SR watermarks for DCN314
- Fix dcn315 pixel rate crb scaling check
- Reset CRTC State Before Restore from S2idle
- Have Payload Properly Created After Resume
- Trigger DIO FIFO resync on commit streams
- Revert vblank change that causes null pointer crash
- Fix possible underflow for displays with large vblank
- Apply 60us prefetch for DCFCLK <= 300Mhz
- Update correct DCN314 register header

Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: cache trace buffer size

[Why & How]
Cache the trace buffer size retrieved from DMUB FW in the driver

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Josip Pavic <josip.pavic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Reorganize DCN30 Makefile

DCN30 has a lot of files in the Makefile, and adding each one next to
the other makes it hard to read and can increase the chance of merge
conflicts. This commit just reorganize the Makefile to put each file
associated with DCN30 in its own line.

Reviewed-by: Chris Park <chris.park@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Trigger DIO FIFO resync on commit streams for DCN32

[WHY and HOW]
Currently, on DCN32 we have an old workaround to resolve a DIO FIFO
speed issue when writing to the OTG DIVIDER register. However, this
workaround is not safe as we should be applying the DIO FIFO rampup
logic when the OTG re disabled along with the encoders. This new
workaround accounts for this. If the workaround sequence is incorrect,
like it is was, there is a chance we might hang. this new
workaround was first implemented in DCN314.

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Saaem Rizvi <syedsaaem.rizvi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update correct DCN314 register header

[Why]
The register header for DCN314 is not correct.

[How]
Update correct DCN314 register header.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Cruise Hung <cruise.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Clean FPGA code in dc

[Why]
Drop dead code for Linux.

[How]
Remove all IS_FPGA_MAXIMUS_DC and IS_DIAG_DC

Reviewed-by: Ariel Bernstein <eric.bernstein@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Apply 60us prefetch for DCFCLK <= 300Mhz

[Description]
- Previously we wanted to apply extra 60us of prefetch for min DCFCLK
  (200Mhz), but DCFCLK can be calculated to be 201Mhz which underflows
  also without the extra prefetch
- Instead, apply the the extra 60us prefetch for any DCFCLK freq <=
  300Mhz

Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix possible underflow for displays with large vblank

[Why]
Underflow observed when using a display with a large vblank region
and low refresh rate

[How]
Simplify calculation of vblank_nom

Increase value for VBlankNomDefaultUS to 800us

Fixed a null pointer from previous commit of this change

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Revert vblank change that causes null pointer crash

Revert commit 1a4bcdbea431 ("drm/amd/display: Fix possible underflow for displays with large vblank")
Because it cause some regression

Fixes: 1a4bcdbea431 ("drm/amd/display: Fix possible underflow for displays with large vblank")
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Trigger DIO FIFO resync on commit streams

[WHY]
Currently, there is an intermittent issue where a screen can either go
blank or be corrupted.

[HOW]
To resolve the issue we trigger the ramping logic for DIO FIFO so that
it goes back up to the correct speed.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Saaem Rizvi <syedsaaem.rizvi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Have Payload Properly Created After Resume

At drm suspend sequence, MST dc_sink is removed. When commit cached
MST stream back in drm resume sequence, the MST stream payload is not
properly created and added into the payload table. After resume, topology
change is reprobed by removing existing streams first. That leads to
no payload is found in the existing payload table as below error
"[drm] ERROR No payload for [MST PORT:] found in mst state"

1. In encoder .atomic_check routine, remove check existance of dc_sink
2. Bypass MST by checking existence of MST root port. dc_link_type cannot
differentiate MST port before topology is rediscovered.

Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix dcn315 pixel rate crb scaling check

fix dcn315 pixel rate crb scaling check error

Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: lower dp link training message level

[Why] some test apps report dp link training waring even dp
training pass. there are 4 tries of lt within
perform_link_training_with_retries. if lt pass within 4 tries,
it will NOT be reated as lt failure. for each try of lt, if lt
fails, current driver implementation prints message at warning
level. this let people think dp lt does not work properly.

[How] for 1st, 2nd and 3rd try of lt, print message at debug
level. for the 4th try of lt, print message at warning level.

Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix warning in disabling vblank irq

[Why]
During gpu-reset, we toggle vblank irq by calling dc_interrupt_set()
instead of amdgpu_irq_get/put() because we don't want to change the irq
source's refcount. However, we see the warning when vblank irq is enabled
by dc_interrupt_set() during gpu-reset but disabled by amdgpu_irq_put()
after gpu-reset.

[How]
Only in dm_gpureset_toggle_interrupts() we toggle vblank interrupts by
calling dc_interrupt_set(). Apart from this we call dm_set_vblank()
which uses amdgpu_irq_get/put() to operate vblank irq.

Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alan Liu <haoping.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update SR watermarks for DCN314

[Why & How]
Update parameters for SR watermarks for DCN314

Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: disable dcn315 pixel rate crb when scaling

The rough calculation does not account for scaling. Also, make 2
segments the minimum allowed per surface to avoid potential 0 detile
with mpc/odm combine on such outputs.

Reviewed-by: Ariel Bernstein <eric.bernstein@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix DMUB debugging print issue

[Why]
The DMUB diagnostic data was not printed out correctly.

[How]
Print the DMUB diagnostic data line by line.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Cruise Hung <cruise.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: stop including swiotlb.h

amdgpu does not need swiotlb.h, so stop including it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: reintroduce radeon_dp_work_func content

Put back the radeon_dp_work_func logic.  It seems that
handling DP RX interrupts is necessary to make some
panels work.  This was removed with the MST support,
but it regresses some systems so add it back.  While
we are here, add the proper mutex locking.

Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2567
Fixes: 01ad1d9c2888 ("drm/radeon: Drop legacy MST support")
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Lyude Paul <lyude@redhat.com>