OSDN Git Service
Ben Hutchings [Sat, 7 Aug 2021 00:06:18 +0000 (02:06 +0200)]
net: phy: micrel: Fix link detection on ksz87xx switch"
Commit
a5e63c7d38d5 "net: phy: micrel: Fix detection of ksz87xx
switch" broke link detection on the external ports of the KSZ8795.
The previously unused phy_driver structure for these devices specifies
config_aneg and read_status functions that appear to be designed for a
fixed link and do not work with the embedded PHYs in the KSZ8795.
Delete the use of these functions in favour of the generic PHY
implementations which were used previously.
Fixes:
a5e63c7d38d5 ("net: phy: micrel: Fix detection of ksz87xx switch")
Signed-off-by: Ben Hutchings <ben.hutchings@mind.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Loic Poulain [Fri, 6 Aug 2021 10:35:09 +0000 (12:35 +0200)]
net: wwan: mhi_wwan_ctrl: Fix possible deadlock
Lockdep detected possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&mhiwwan->rx_lock);
local_irq_disable();
lock(&mhi_cntrl->pm_lock);
lock(&mhiwwan->rx_lock);
<Interrupt>
lock(&mhi_cntrl->pm_lock);
*** DEADLOCK ***
To prevent this we need to disable the soft-interrupts when taking
the rx_lock.
Cc: stable@vger.kernel.org
Fixes:
fa588eba632d ("net: Add Qcom WWAN control driver")
Reported-by: Thomas Perrot <thomas.perrot@bootlin.com>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Oleksij Rempel [Fri, 6 Aug 2021 09:47:23 +0000 (11:47 +0200)]
net: dsa: qca: ar9331: make proper initial port defaults
Make sure that all external port are actually isolated from each other,
so no packets are leaked.
Fixes:
ec6698c272de ("net: dsa: add support for Atheros AR9331 built-in switch")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 7 Aug 2021 08:33:22 +0000 (09:33 +0100)]
Merge branch 'r8169-RTL8106e'
Hayes Wang says:
====================
r8169: adjust the setting for RTL8106e
These patches are uesed to avoid the delay of link-up interrupt, when
enabling ASPM for RTL8106e. The patch #1 is used to enable ASPM if
it is possible. And the patch #2 is used to modify the entrance latencies
of L0 and L1.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Hayes Wang [Fri, 6 Aug 2021 09:15:56 +0000 (17:15 +0800)]
r8169: change the L0/L1 entrance latencies for RTL8106e
The original L0 and L1 entrance latencies of RTL8106e are 4us. And
they cause the delay of link-up interrupt when enabling ASPM. Change
the L0 entrance latency to 7us and L1 entrance latency to 32us. Then,
they could avoid the issue.
Tested-by: Koba Ko <koba.ko@canonical.com>
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hayes Wang [Fri, 6 Aug 2021 09:15:55 +0000 (17:15 +0800)]
Revert "r8169: avoid link-up interrupt issue on RTL8106e if user enables ASPM"
This reverts commit
1ee8856de82faec9bc8bd0f2308a7f27e30ba207.
This is used to re-enable ASPM on RTL8106e, if it is possible.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 7 Aug 2021 08:26:54 +0000 (09:26 +0100)]
Merge git://git./pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2021-08-07
The following pull-request contains BPF updates for your *net* tree.
We've added 4 non-merge commits during the last 9 day(s) which contain
a total of 4 files changed, 8 insertions(+), 7 deletions(-).
The main changes are:
1) Fix integer overflow in htab's lookup + delete batch op, from Tatsuhiko Yasumatsu.
2) Fix invalid fd 0 close in libbpf if BTF parsing failed, from Daniel Xu.
3) Fix libbpf feature probe for BPF_PROG_TYPE_CGROUP_SOCKOPT, from Robin Gögge.
4) Fix minor libbpf doc warning regarding code-block language, from Randy Dunlap.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Tatsuhiko Yasumatsu [Fri, 6 Aug 2021 15:04:18 +0000 (00:04 +0900)]
bpf: Fix integer overflow involving bucket_size
In __htab_map_lookup_and_delete_batch(), hash buckets are iterated
over to count the number of elements in each bucket (bucket_size).
If bucket_size is large enough, the multiplication to calculate
kvmalloc() size could overflow, resulting in out-of-bounds write
as reported by KASAN:
[...]
[ 104.986052] BUG: KASAN: vmalloc-out-of-bounds in __htab_map_lookup_and_delete_batch+0x5ce/0xb60
[ 104.986489] Write of size
4194224 at addr
ffffc9010503be70 by task crash/112
[ 104.986889]
[ 104.987193] CPU: 0 PID: 112 Comm: crash Not tainted 5.14.0-rc4 #13
[ 104.987552] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
[ 104.988104] Call Trace:
[ 104.988410] dump_stack_lvl+0x34/0x44
[ 104.988706] print_address_description.constprop.0+0x21/0x140
[ 104.988991] ? __htab_map_lookup_and_delete_batch+0x5ce/0xb60
[ 104.989327] ? __htab_map_lookup_and_delete_batch+0x5ce/0xb60
[ 104.989622] kasan_report.cold+0x7f/0x11b
[ 104.989881] ? __htab_map_lookup_and_delete_batch+0x5ce/0xb60
[ 104.990239] kasan_check_range+0x17c/0x1e0
[ 104.990467] memcpy+0x39/0x60
[ 104.990670] __htab_map_lookup_and_delete_batch+0x5ce/0xb60
[ 104.990982] ? __wake_up_common+0x4d/0x230
[ 104.991256] ? htab_of_map_free+0x130/0x130
[ 104.991541] bpf_map_do_batch+0x1fb/0x220
[...]
In hashtable, if the elements' keys have the same jhash() value, the
elements will be put into the same bucket. By putting a lot of elements
into a single bucket, the value of bucket_size can be increased to
trigger the integer overflow.
Triggering the overflow is possible for both callers with CAP_SYS_ADMIN
and callers without CAP_SYS_ADMIN.
It will be trivial for a caller with CAP_SYS_ADMIN to intentionally
reach this overflow by enabling BPF_F_ZERO_SEED. As this flag will set
the random seed passed to jhash() to 0, it will be easy for the caller
to prepare keys which will be hashed into the same value, and thus put
all the elements into the same bucket.
If the caller does not have CAP_SYS_ADMIN, BPF_F_ZERO_SEED cannot be
used. However, it will be still technically possible to trigger the
overflow, by guessing the random seed value passed to jhash() (32bit)
and repeating the attempt to trigger the overflow. In this case,
the probability to trigger the overflow will be low and will take
a very long time.
Fix the integer overflow by calling kvmalloc_array() instead of
kvmalloc() to allocate memory.
Fixes:
057996380a42 ("bpf: Add batch ops to all htab bpf map")
Signed-off-by: Tatsuhiko Yasumatsu <th.yasumatsu@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210806150419.109658-1-th.yasumatsu@gmail.com
Randy Dunlap [Mon, 2 Aug 2021 01:50:37 +0000 (18:50 -0700)]
libbpf, doc: Eliminate warnings in libbpf_naming_convention
Use "code-block: none" instead of "c" for non-C-language code blocks.
Removes these warnings:
lnx-514-rc4/Documentation/bpf/libbpf/libbpf_naming_convention.rst:111: WARNING: Could not lex literal_block as "c". Highlighting skipped.
lnx-514-rc4/Documentation/bpf/libbpf/libbpf_naming_convention.rst:124: WARNING: Could not lex literal_block as "c". Highlighting skipped.
Fixes:
f42cfb469f9b ("bpf: Add documentation for libbpf including API autogen")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210802015037.787-1-rdunlap@infradead.org
Daniel Xu [Wed, 28 Jul 2021 23:09:21 +0000 (16:09 -0700)]
libbpf: Do not close un-owned FD 0 on errors
Before this patch, btf_new() was liable to close an arbitrary FD 0 if
BTF parsing failed. This was because:
* btf->fd was initialized to 0 through the calloc()
* btf__free() (in the `done` label) closed any FDs >= 0
* btf->fd is left at 0 if parsing fails
This issue was discovered on a system using libbpf v0.3 (without
BTF_KIND_FLOAT support) but with a kernel that had BTF_KIND_FLOAT types
in BTF. Thus, parsing fails.
While this patch technically doesn't fix any issues b/c upstream libbpf
has BTF_KIND_FLOAT support, it'll help prevent issues in the future if
more BTF types are added. It also allow the fix to be backported to
older libbpf's.
Fixes:
3289959b97ca ("libbpf: Support BTF loading and raw data output in both endianness")
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/5969bb991adedb03c6ae93e051fd2a00d293cf25.1627513670.git.dxu@dxuuu.xyz
Robin Gögge [Wed, 28 Jul 2021 22:58:25 +0000 (00:58 +0200)]
libbpf: Fix probe for BPF_PROG_TYPE_CGROUP_SOCKOPT
This patch fixes the probe for BPF_PROG_TYPE_CGROUP_SOCKOPT,
so the probe reports accurate results when used by e.g.
bpftool.
Fixes:
4cdbfb59c44a ("libbpf: support sockopt hooks")
Signed-off-by: Robin Gögge <r.goegge@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20210728225825.2357586-1-r.goegge@gmail.com
Jakub Kicinski [Fri, 6 Aug 2021 15:44:49 +0000 (08:44 -0700)]
Merge git://git./pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Restrict range element expansion in ipset to avoid soft lockup,
from Jozsef Kadlecsik.
2) Memleak in error path for nf_conntrack_bridge for IPv4 packets,
from Yajun Deng.
3) Simplify conntrack garbage collection strategy to avoid frequent
wake-ups, from Florian Westphal.
4) Fix NFNLA_HOOK_FUNCTION_NAME string, do not include module name.
5) Missing chain family netlink attribute in chain description
in nfnetlink_hook.
6) Incorrect sequence number on nfnetlink_hook dumps.
7) Use netlink request family in reply message for consistency.
8) Remove offload_pickup sysctl, use conntrack for established state
instead, from Florian Westphal.
9) Translate NFPROTO_INET/ingress to NFPROTO_NETDEV/ingress, since
NFPROTO_INET is not exposed through nfnetlink_hook.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
netfilter: nfnetlink_hook: translate inet ingress to netdev
netfilter: conntrack: remove offload_pickup sysctl again
netfilter: nfnetlink_hook: Use same family as request message
netfilter: nfnetlink_hook: use the sequence number of the request message
netfilter: nfnetlink_hook: missing chain family
netfilter: nfnetlink_hook: strip off module name from hookfn
netfilter: conntrack: collect all entries in one cycle
netfilter: nf_conntrack_bridge: Fix memory leak when error
netfilter: ipset: Limit the maximal range of consecutive elements to add/delete
====================
Link: https://lore.kernel.org/r/20210806151149.6356-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pablo Neira Ayuso [Fri, 6 Aug 2021 10:33:57 +0000 (12:33 +0200)]
netfilter: nfnetlink_hook: translate inet ingress to netdev
The NFPROTO_INET pseudofamily is not exposed through this new netlink
interface. The netlink dump either shows NFPROTO_IPV4 or NFPROTO_IPV6
for NFPROTO_INET prerouting/input/forward/output/postrouting hooks.
The NFNLA_CHAIN_FAMILY attribute provides the family chain, which
specifies if this hook applies to inet traffic only (either IPv4 or
IPv6).
Translate the inet/ingress hook to netdev/ingress to fully hide the
NFPROTO_INET implementation details.
Fixes:
e2cf17d3774c ("netfilter: add new hook nfnl subsystem")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Florian Westphal [Wed, 4 Aug 2021 13:02:15 +0000 (15:02 +0200)]
netfilter: conntrack: remove offload_pickup sysctl again
These two sysctls were added because the hardcoded defaults (2 minutes,
tcp, 30 seconds, udp) turned out to be too low for some setups.
They appeared in 5.14-rc1 so it should be fine to remove it again.
Marcelo convinced me that there should be no difference between a flow
that was offloaded vs. a flow that was not wrt. timeout handling.
Thus the default is changed to those for TCP established and UDP stream,
5 days and 120 seconds, respectively.
Marcelo also suggested to account for the timeout value used for the
offloading, this avoids increase beyond the value in the conntrack-sysctl
and will also instantly expire the conntrack entry with altered sysctls.
Example:
nf_conntrack_udp_timeout_stream=60
nf_flowtable_udp_timeout=60
This will remove offloaded udp flows after one minute, rather than two.
An earlier version of this patch also cleared the ASSURED bit to
allow nf_conntrack to evict the entry via early_drop (i.e., table full).
However, it looks like we can safely assume that connection timed out
via HW is still in established state, so this isn't needed.
Quoting Oz:
[..] the hardware sends all packets with a set FIN flags to sw.
[..] Connections that are aged in hardware are expected to be in the
established state.
In case it turns out that back-to-sw-path transition can occur for
'dodgy' connections too (e.g., one side disappeared while software-path
would have been in RETRANS timeout), we can adjust this later.
Cc: Oz Shlomo <ozsh@nvidia.com>
Cc: Paul Blakey <paulb@nvidia.com>
Suggested-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pablo Neira Ayuso [Tue, 3 Aug 2021 23:27:20 +0000 (01:27 +0200)]
netfilter: nfnetlink_hook: Use same family as request message
Use the same family as the request message, for consistency. The
netlink payload provides sufficient information to describe the hook
object, including the family.
This makes it easier to userspace to correlate the hooks are that
visited by the packets for a certain family.
Fixes:
e2cf17d3774c ("netfilter: add new hook nfnl subsystem")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pablo Neira Ayuso [Tue, 3 Aug 2021 23:27:19 +0000 (01:27 +0200)]
netfilter: nfnetlink_hook: use the sequence number of the request message
The sequence number allows to correlate the netlink reply message (as
part of the dump) with the original request message.
The cb->seq field is internally used to detect an interference (update)
of the hook list during the netlink dump, do not use it as sequence
number in the netlink dump header.
Fixes:
e2cf17d3774c ("netfilter: add new hook nfnl subsystem")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pablo Neira Ayuso [Mon, 2 Aug 2021 22:15:54 +0000 (00:15 +0200)]
netfilter: nfnetlink_hook: missing chain family
The family is relevant for pseudo-families like NFPROTO_INET
otherwise the user needs to rely on the hook function name to
differentiate it from NFPROTO_IPV4 and NFPROTO_IPV6 names.
Add nfnl_hook_chain_desc_attributes instead of using the existing
NFTA_CHAIN_* attributes, since these do not provide a family number.
Fixes:
e2cf17d3774c ("netfilter: add new hook nfnl subsystem")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pablo Neira Ayuso [Mon, 2 Aug 2021 22:15:53 +0000 (00:15 +0200)]
netfilter: nfnetlink_hook: strip off module name from hookfn
NFNLA_HOOK_FUNCTION_NAME should include the hook function name only,
the module name is already provided by NFNLA_HOOK_MODULE_NAME.
Fixes:
e2cf17d3774c ("netfilter: add new hook nfnl subsystem")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Florian Westphal [Mon, 26 Jul 2021 22:29:19 +0000 (00:29 +0200)]
netfilter: conntrack: collect all entries in one cycle
Michal Kubecek reports that conntrack gc is responsible for frequent
wakeups (every 125ms) on idle systems.
On busy systems, timed out entries are evicted during lookup.
The gc worker is only needed to remove entries after system becomes idle
after a busy period.
To resolve this, always scan the entire table.
If the scan is taking too long, reschedule so other work_structs can run
and resume from next bucket.
After a completed scan, wait for 2 minutes before the next cycle.
Heuristics for faster re-schedule are removed.
GC_SCAN_INTERVAL could be exposed as a sysctl in the future to allow
tuning this as-needed or even turn the gc worker off.
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
John Hubbard [Fri, 6 Aug 2021 06:53:30 +0000 (23:53 -0700)]
net: mvvp2: fix short frame size on s390
On s390, the following build warning occurs:
drivers/net/ethernet/marvell/mvpp2/mvpp2.h:844:2: warning: overflow in
conversion from 'long unsigned int' to 'int' changes value from
'
18446744073709551584' to '-32' [-Woverflow]
844 | ((total_size) - MVPP2_SKB_HEADROOM - MVPP2_SKB_SHINFO_SIZE)
This happens because MVPP2_SKB_SHINFO_SIZE, which is 320 bytes (which is
already 64-byte aligned) on some architectures, actually gets ALIGN'd up
to 512 bytes in the s390 case.
So then, when this is invoked:
MVPP2_RX_MAX_PKT_SIZE(MVPP2_BM_SHORT_FRAME_SIZE)
...that turns into:
704 - 224 - 512 == -32
...which is not a good frame size to end up with! The warning above is a
bit lucky: it notices a signed/unsigned bad behavior here, which leads
to the real problem of a frame that is too short for its contents.
Increase MVPP2_BM_SHORT_FRAME_SIZE by 32 (from 704 to 736), which is
just exactly big enough. (The other values can't readily be changed
without causing a lot of other problems.)
Fixes:
07dd0a7aae7f ("mvpp2: add basic XDP support")
Cc: Sven Auhagen <sven.auhagen@voleatech.de>
Cc: Matteo Croce <mcroce@microsoft.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
DENG Qingfang [Fri, 6 Aug 2021 04:05:27 +0000 (12:05 +0800)]
net: dsa: mt7530: add the missing RxUnicast MIB counter
Add the missing RxUnicast counter.
Fixes:
b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 5 Aug 2021 19:26:00 +0000 (12:26 -0700)]
Merge tag 'net-5.14-rc5' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from ipsec.
Current release - regressions:
- sched: taprio: fix init procedure to avoid inf loop when dumping
- sctp: move the active_key update after sh_keys is added
Current release - new code bugs:
- sparx5: fix build with old GCC & bitmask on 32-bit targets
Previous releases - regressions:
- xfrm: redo the PREEMPT_RT RCU vs hash_resize_mutex deadlock fix
- xfrm: fixes for the compat netlink attribute translator
- phy: micrel: Fix detection of ksz87xx switch
Previous releases - always broken:
- gro: set inner transport header offset in tcp/udp GRO hook to avoid
crashes when such packets reach GSO
- vsock: handle VIRTIO_VSOCK_OP_CREDIT_REQUEST, as required by spec
- dsa: sja1105: fix static FDB entries on SJA1105P/Q/R/S and SJA1110
- bridge: validate the NUD_PERMANENT bit when adding an extern_learn
FDB entry
- usb: lan78xx: don't modify phy_device state concurrently
- usb: pegasus: check for errors of IO routines"
* tag 'net-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (48 commits)
net: vxge: fix use-after-free in vxge_device_unregister
net: fec: fix use-after-free in fec_drv_remove
net: pegasus: fix uninit-value in get_interrupt_interval
net: ethernet: ti: am65-cpsw: fix crash in am65_cpsw_port_offload_fwd_mark_update()
bnx2x: fix an error code in bnx2x_nic_load()
net: wwan: iosm: fix recursive lock acquire in unregister
net: wwan: iosm: correct data protocol mask bit
net: wwan: iosm: endianness type correction
net: wwan: iosm: fix lkp buildbot warning
net: usb: lan78xx: don't modify phy_device state concurrently
docs: networking: netdevsim rules
net: usb: pegasus: Remove the changelog and DRIVER_VERSION.
net: usb: pegasus: Check the return value of get_geristers() and friends;
net/prestera: Fix devlink groups leakage in error flow
net: sched: fix lockdep_set_class() typo error for sch->seqlock
net: dsa: qca: ar9331: reorder MDIO write sequence
VSOCK: handle VIRTIO_VSOCK_OP_CREDIT_REQUEST
mptcp: drop unused rcu member in mptcp_pm_addr_entry
net: ipv6: fix returned variable type in ip6_skb_dst_mtu
nfp: update ethtool reporting of pauseframe control
...
Tetsuo Handa [Wed, 4 Aug 2021 10:26:56 +0000 (19:26 +0900)]
Bluetooth: defer cleanup of resources in hci_unregister_dev()
syzbot is hitting might_sleep() warning at hci_sock_dev_event() due to
calling lock_sock() with rw spinlock held [1].
It seems that history of this locking problem is a trial and error.
Commit
b40df5743ee8 ("[PATCH] bluetooth: fix socket locking in
hci_sock_dev_event()") in 2.6.21-rc4 changed bh_lock_sock() to
lock_sock() as an attempt to fix lockdep warning.
Then, commit
4ce61d1c7a8e ("[BLUETOOTH]: Fix locking in
hci_sock_dev_event().") in 2.6.22-rc2 changed lock_sock() to
local_bh_disable() + bh_lock_sock_nested() as an attempt to fix the
sleep in atomic context warning.
Then, commit
4b5dd696f81b ("Bluetooth: Remove local_bh_disable() from
hci_sock.c") in 3.3-rc1 removed local_bh_disable().
Then, commit
e305509e678b ("Bluetooth: use correct lock to prevent UAF
of hdev object") in 5.13-rc5 again changed bh_lock_sock_nested() to
lock_sock() as an attempt to fix CVE-2021-3573.
This difficulty comes from current implementation that
hci_sock_dev_event(HCI_DEV_UNREG) is responsible for dropping all
references from sockets because hci_unregister_dev() immediately
reclaims resources as soon as returning from
hci_sock_dev_event(HCI_DEV_UNREG).
But the history suggests that hci_sock_dev_event(HCI_DEV_UNREG) was not
doing what it should do.
Therefore, instead of trying to detach sockets from device, let's accept
not detaching sockets from device at hci_sock_dev_event(HCI_DEV_UNREG),
by moving actual cleanup of resources from hci_unregister_dev() to
hci_cleanup_dev() which is called by bt_host_release() when all
references to this unregistered device (which is a kobject) are gone.
Since hci_sock_dev_event(HCI_DEV_UNREG) no longer resets
hci_pi(sk)->hdev, we need to check whether this device was unregistered
and return an error based on HCI_UNREGISTER flag. There might be subtle
behavioral difference in "monitor the hdev" functionality; please report
if you found something went wrong due to this patch.
Link: https://syzkaller.appspot.com/bug?extid=a5df189917e79d5e59c9
Reported-by: syzbot <syzbot+a5df189917e79d5e59c9@syzkaller.appspotmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes:
e305509e678b ("Bluetooth: use correct lock to prevent UAF of hdev object")
Acked-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 5 Aug 2021 19:06:31 +0000 (12:06 -0700)]
Merge tag 'selinux-pr-
20210805' of git://git./linux/kernel/git/pcmoore/selinux
Pull selinux fix from Paul Moore:
"One small SELinux fix for a problem where an error code was not being
propagated back up to userspace when a bogus SELinux policy is loaded
into the kernel"
* tag 'selinux-pr-
20210805' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: correct the return value when loads initial sids
Linus Torvalds [Thu, 5 Aug 2021 19:00:00 +0000 (12:00 -0700)]
Merge branch 'for-v5.14' of git://git./linux/kernel/git/ebiederm/user-namespace
Pull ucounts fix from Eric Biederman:
"Fix a subtle locking versus reference counting bug in the ucount
changes, found by syzbot"
* 'for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
ucounts: Fix race condition between alloc_ucounts and put_ucounts
Linus Torvalds [Thu, 5 Aug 2021 18:53:34 +0000 (11:53 -0700)]
Merge tag 'trace-v5.14-rc4' of git://git./linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Various tracing fixes:
- Fix NULL pointer dereference caused by an error path
- Give histogram calculation fields a size, otherwise it breaks
synthetic creation based on them.
- Reject strings being used for number calculations.
- Fix recordmcount.pl warning on llvm building RISC-V allmodconfig
- Fix the draw_functrace.py script to handle the new trace output
- Fix warning of smp_processor_id() in preemptible code"
* tag 'trace-v5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Quiet smp_processor_id() use in preemptable warning in hwlat
scripts/tracing: fix the bug that can't parse raw_trace_func
scripts/recordmcount.pl: Remove check_objcopy() and $can_use_local
tracing: Reject string operand in the histogram expression
tracing / histogram: Give calculation hist_fields a size
tracing: Fix NULL pointer dereference in start_creating
Linus Torvalds [Thu, 5 Aug 2021 18:46:24 +0000 (11:46 -0700)]
Merge tag 's390-5.14-4' of git://git./linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- fix zstd build for -march=z900 (undefined reference to __clzdi2)
- add missing .got.plts to vdso linker scripts to fix kpatch build
errors
- update defconfigs
* tag 's390-5.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: update defconfigs
s390/boot: fix zstd build for -march=z900
s390/vdso: add .got.plt in vdso linker script
Linus Torvalds [Thu, 5 Aug 2021 18:23:09 +0000 (11:23 -0700)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Mostly bugfixes; plus, support for XMM arguments to Hyper-V hypercalls
now obeys KVM_CAP_HYPERV_ENFORCE_CPUID.
Both the XMM arguments feature and KVM_CAP_HYPERV_ENFORCE_CPUID are
new in 5.14, and each did not know of the other"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/mmu: Fix per-cpu counter corruption on 32-bit builds
KVM: selftests: fix hyperv_clock test
KVM: SVM: improve the code readability for ASID management
KVM: SVM: Fix off-by-one indexing when nullifying last used SEV VMCB
KVM: Do not leak memory for duplicate debugfs directories
KVM: selftests: Test access to XMM fast hypercalls
KVM: x86: hyper-v: Check if guest is allowed to use XMM registers for hypercall input
KVM: x86: Introduce trace_kvm_hv_hypercall_done()
KVM: x86: hyper-v: Check access to hypercall before reading XMM registers
KVM: x86: accept userspace interrupt only if no event is injected
Linus Torvalds [Thu, 5 Aug 2021 18:16:02 +0000 (11:16 -0700)]
Merge branch 'pcmcia-next' of git://git./linux/kernel/git/brodo/linux
Pull pcmcia fix from Dominik Brodowski:
"Zheyu Ma found and fixed a null pointer dereference bug in the device
driver for the i82092 card reader"
* 'pcmcia-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
pcmcia: i82092: fix a null pointer dereference bug
Alex Xu (Hello71) [Thu, 5 Aug 2021 14:40:47 +0000 (10:40 -0400)]
pipe: increase minimum default pipe size to 2 pages
This program always prints 4096 and hangs before the patch, and always
prints 8192 and exits successfully after:
int main()
{
int pipefd[2];
for (int i = 0; i < 1025; i++)
if (pipe(pipefd) == -1)
return 1;
size_t bufsz = fcntl(pipefd[1], F_GETPIPE_SZ);
printf("%zd\n", bufsz);
char *buf = calloc(bufsz, 1);
write(pipefd[1], buf, bufsz);
read(pipefd[0], buf, bufsz-1);
write(pipefd[1], buf, 1);
}
Note that you may need to increase your RLIMIT_NOFILE before running the
program.
Fixes:
759c01142a ("pipe: limit the per-user amount of pages allocated in pipes")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/lkml/1628086770.5rn8p04n6j.none@localhost/
Link: https://lore.kernel.org/lkml/1628127094.lxxn016tj7.none@localhost/
Signed-off-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jakub Kicinski [Thu, 5 Aug 2021 14:29:55 +0000 (07:29 -0700)]
Merge branch 'net-fix-use-after-free-bugs'
Pavel Skripkin says:
====================
net: fix use-after-free bugs
I've added new checker to smatch yesterday. It warns about using
netdev_priv() pointer after free_{netdev,candev}() call. I hope, it will
get into next smatch release.
Some of the reported bugs are fixed and upstreamed already, but Dan ran new
smatch with allmodconfig and found 2 more. Big thanks to Dan for doing it,
because I totally forgot to do it.
====================
Link: https://lore.kernel.org/r/cover.1628091954.git.paskripkin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pavel Skripkin [Wed, 4 Aug 2021 15:52:20 +0000 (18:52 +0300)]
net: vxge: fix use-after-free in vxge_device_unregister
Smatch says:
drivers/net/ethernet/neterion/vxge/vxge-main.c:3518 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev);
drivers/net/ethernet/neterion/vxge/vxge-main.c:3518 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev);
drivers/net/ethernet/neterion/vxge/vxge-main.c:3520 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev);
drivers/net/ethernet/neterion/vxge/vxge-main.c:3520 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev);
Since vdev pointer is netdev private data accessing it after free_netdev()
call can cause use-after-free bug. Fix it by moving free_netdev() call at
the end of the function
Fixes:
6cca200362b4 ("vxge: cleanup probe error paths")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pavel Skripkin [Wed, 4 Aug 2021 15:51:51 +0000 (18:51 +0300)]
net: fec: fix use-after-free in fec_drv_remove
Smatch says:
drivers/net/ethernet/freescale/fec_main.c:3994 fec_drv_remove() error: Using fep after free_{netdev,candev}(ndev);
drivers/net/ethernet/freescale/fec_main.c:3995 fec_drv_remove() error: Using fep after free_{netdev,candev}(ndev);
Since fep pointer is netdev private data, accessing it after free_netdev()
call can cause use-after-free bug. Fix it by moving free_netdev() call at
the end of the function
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes:
a31eda65ba21 ("net: fec: fix clock count mis-match")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pavel Skripkin [Wed, 4 Aug 2021 14:30:05 +0000 (17:30 +0300)]
net: pegasus: fix uninit-value in get_interrupt_interval
Syzbot reported uninit value pegasus_probe(). The problem was in missing
error handling.
get_interrupt_interval() internally calls read_eprom_word() which can
fail in some cases. For example: failed to receive usb control message.
These cases should be handled to prevent uninit value bug, since
read_eprom_word() will not initialize passed stack variable in case of
internal failure.
Fail log:
BUG: KMSAN: uninit-value in get_interrupt_interval drivers/net/usb/pegasus.c:746 [inline]
BUG: KMSAN: uninit-value in pegasus_probe+0x10e7/0x4080 drivers/net/usb/pegasus.c:1152
CPU: 1 PID: 825 Comm: kworker/1:1 Not tainted 5.12.0-rc6-syzkaller #0
...
Workqueue: usb_hub_wq hub_event
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x24c/0x2e0 lib/dump_stack.c:120
kmsan_report+0xfb/0x1e0 mm/kmsan/kmsan_report.c:118
__msan_warning+0x5c/0xa0 mm/kmsan/kmsan_instr.c:197
get_interrupt_interval drivers/net/usb/pegasus.c:746 [inline]
pegasus_probe+0x10e7/0x4080 drivers/net/usb/pegasus.c:1152
....
Local variable ----data.i@pegasus_probe created at:
get_interrupt_interval drivers/net/usb/pegasus.c:1151 [inline]
pegasus_probe+0xe57/0x4080 drivers/net/usb/pegasus.c:1152
get_interrupt_interval drivers/net/usb/pegasus.c:1151 [inline]
pegasus_probe+0xe57/0x4080 drivers/net/usb/pegasus.c:1152
Reported-and-tested-by: syzbot+02c9f70f3afae308464a@syzkaller.appspotmail.com
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20210804143005.439-1-paskripkin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Steven Rostedt (VMware) [Wed, 4 Aug 2021 18:18:48 +0000 (14:18 -0400)]
tracing: Quiet smp_processor_id() use in preemptable warning in hwlat
The hardware latency detector (hwlat) has a mode that it runs one thread
across CPUs. The logic to move from the currently running CPU to the next
one in the list does a smp_processor_id() to find where it currently is.
Unfortunately, it's done with preemption enabled, and this triggers a
warning for using smp_processor_id() in a preempt enabled section.
As it is only using smp_processor_id() to get information on where it
currently is in order to simply move it to the next CPU, it doesn't really
care if it got moved in the mean time. It will simply balance out later if
such a case arises.
Switch smp_processor_id() to raw_smp_processor_id() to quiet that warning.
Link: https://lkml.kernel.org/r/20210804141848.79edadc0@oasis.local.home
Acked-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Fixes:
8fa826b7344d ("trace/hwlat: Implement the mode config option")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Grygorii Strashko [Thu, 5 Aug 2021 10:14:09 +0000 (13:14 +0300)]
net: ethernet: ti: am65-cpsw: fix crash in am65_cpsw_port_offload_fwd_mark_update()
The am65_cpsw_port_offload_fwd_mark_update() causes NULL exception crash
when there is at least one disabled port and any other port added to the
bridge first time.
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000858
pc : am65_cpsw_port_offload_fwd_mark_update+0x54/0x68
lr : am65_cpsw_netdevice_event+0x8c/0xf0
Call trace:
am65_cpsw_port_offload_fwd_mark_update+0x54/0x68
notifier_call_chain+0x54/0x98
raw_notifier_call_chain+0x14/0x20
call_netdevice_notifiers_info+0x34/0x78
__netdev_upper_dev_link+0x1c8/0x290
netdev_master_upper_dev_link+0x1c/0x28
br_add_if+0x3f0/0x6d0 [bridge]
Fix it by adding proper check for port->ndev != NULL.
Fixes:
2934db9bcb30 ("net: ti: am65-cpsw-nuss: Add netdevice notifiers")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Thu, 5 Aug 2021 10:38:26 +0000 (13:38 +0300)]
bnx2x: fix an error code in bnx2x_nic_load()
Set the error code if bnx2x_alloc_fw_stats_mem() fails. The current
code returns success.
Fixes:
ad5afc89365e ("bnx2x: Separate VF and PF logic")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 5 Aug 2021 10:28:56 +0000 (11:28 +0100)]
Merge branch 'eean-iosm-fixes'
M Chetan Kumar says:
====================
net: wwan: iosm: fixes
This patch series contains IOSM Driver fixes. Below is the patch
series breakdown.
PATCH1:
* Correct the td buffer type casting & format specifier to fix lkp buildbot
warning.
PATCH2:
* Endianness type correction for nr_of_bytes. This field is exchanged
as part of host-device protocol communication.
PATCH3:
* Correct ul/dl data protocol mask bit to know which protocol capability
does device implement.
PATCH4:
* Calling unregister_netdevice() inside wwan del link is trying to
acquire the held lock in ndo_stop_cb(). Instead, queue net dev to
be unregistered later.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
M Chetan Kumar [Wed, 4 Aug 2021 16:09:52 +0000 (21:39 +0530)]
net: wwan: iosm: fix recursive lock acquire in unregister
Calling unregister_netdevice() inside wwan del link is trying to
acquire the held lock in ndo_stop_cb(). Instead, queue net dev to
be unregistered later.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
M Chetan Kumar [Wed, 4 Aug 2021 16:09:51 +0000 (21:39 +0530)]
net: wwan: iosm: correct data protocol mask bit
Correct ul/dl data protocol mask bit to know which protocol capability
does device implement.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
M Chetan Kumar [Wed, 4 Aug 2021 16:09:50 +0000 (21:39 +0530)]
net: wwan: iosm: endianness type correction
Endianness type correction for nr_of_bytes. This field is exchanged
as part of host-device protocol communication.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
M Chetan Kumar [Wed, 4 Aug 2021 16:09:49 +0000 (21:39 +0530)]
net: wwan: iosm: fix lkp buildbot warning
Correct td buffer type casting & format specifier to fix lkp buildbot
warning.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sean Christopherson [Wed, 4 Aug 2021 21:46:09 +0000 (14:46 -0700)]
KVM: x86/mmu: Fix per-cpu counter corruption on 32-bit builds
Take a signed 'long' instead of an 'unsigned long' for the number of
pages to add/subtract to the total number of pages used by the MMU. This
fixes a zero-extension bug on 32-bit kernels that effectively corrupts
the per-cpu counter used by the shrinker.
Per-cpu counters take a signed 64-bit value on both 32-bit and 64-bit
kernels, whereas kvm_mod_used_mmu_pages() takes an unsigned long and thus
an unsigned 32-bit value on 32-bit kernels. As a result, the value used
to adjust the per-cpu counter is zero-extended (unsigned -> signed), not
sign-extended (signed -> signed), and so KVM's intended -1 gets morphed to
4294967295 and effectively corrupts the counter.
This was found by a staggering amount of sheer dumb luck when running
kvm-unit-tests on a 32-bit KVM build. The shrinker just happened to kick
in while running tests and do_shrink_slab() logged an error about trying
to free a negative number of objects. The truly lucky part is that the
kernel just happened to be a slightly stale build, as the shrinker no
longer yells about negative objects as of commit
18bb473e5031 ("mm:
vmscan: shrink deferred objects proportional to priority").
vmscan: shrink_slab: mmu_shrink_scan+0x0/0x210 [kvm] negative objects to delete nr=-
858993460
Fixes:
bc8a3d8925a8 ("kvm: mmu: Fix overflow on kvm mmu page limit calculation")
Cc: stable@vger.kernel.org
Cc: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20210804214609.
1096003-1-seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hui Su [Fri, 11 Jun 2021 02:21:07 +0000 (10:21 +0800)]
scripts/tracing: fix the bug that can't parse raw_trace_func
Since commit
77271ce4b2c0 ("tracing: Add irq, preempt-count and need resched info
to default trace output"), the default trace output format has been changed to:
<idle>-0 [009] d.h. 22420.068695: _raw_spin_lock_irqsave <-hrtimer_interrupt
<idle>-0 [000] ..s. 22420.068695: _nohz_idle_balance <-run_rebalance_domains
<idle>-0 [011] d.h. 22420.068695: account_process_tick <-update_process_times
origin trace output format:(before v3.2.0)
# tracer: nop
#
# TASK-PID CPU# TIMESTAMP FUNCTION
# | | | | |
migration/0-6 [000] 50.025810: rcu_note_context_switch <-__schedule
migration/0-6 [000] 50.025812: trace_rcu_utilization <-rcu_note_context_switch
migration/0-6 [000] 50.025813: rcu_sched_qs <-rcu_note_context_switch
migration/0-6 [000] 50.025815: rcu_preempt_qs <-rcu_note_context_switch
migration/0-6 [000] 50.025817: trace_rcu_utilization <-rcu_note_context_switch
migration/0-6 [000] 50.025818: debug_lockdep_rcu_enabled <-__schedule
migration/0-6 [000] 50.025820: debug_lockdep_rcu_enabled <-__schedule
The draw_functrace.py(introduced in v2.6.28) can't parse the new version format trace_func,
So we need modify draw_functrace.py to adapt the new version trace output format.
Link: https://lkml.kernel.org/r/20210611022107.608787-1-suhui@zeku.com
Cc: stable@vger.kernel.org
Fixes:
77271ce4b2c0 tracing: Add irq, preempt-count and need resched info to default trace output
Signed-off-by: Hui Su <suhui@zeku.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Nathan Chancellor [Mon, 2 Aug 2021 21:03:07 +0000 (14:03 -0700)]
scripts/recordmcount.pl: Remove check_objcopy() and $can_use_local
When building ARCH=riscv allmodconfig with llvm-objcopy, the objcopy
version warning from this script appears:
WARNING: could not find objcopy version or version is less than 2.17.
Local function references are disabled.
The check_objcopy() function in scripts/recordmcount.pl is set up to
parse GNU objcopy's version string, not llvm-objcopy's, which triggers
the warning.
Commit
799c43415442 ("kbuild: thin archives make default for all archs")
made binutils 2.20 mandatory and commit
ba64beb17493 ("kbuild: check the
minimum assembler version in Kconfig") enforces this at configuration
time so just remove check_objcopy() and $can_use_local instead, assuming
--globalize-symbol is always available.
llvm-objcopy has supported --globalize-symbol since LLVM 7.0.0 in 2018
and the minimum version for building the kernel with LLVM is 10.0.1 so
there is no issue introduced:
Link: https://github.com/llvm/llvm-project/commit/ee5be798dae30d5f9414b01f76ff807edbc881aa
Link: https://lkml.kernel.org/r/20210802210307.3202472-1-nathan@kernel.org
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Masami Hiramatsu [Tue, 27 Jul 2021 22:55:43 +0000 (07:55 +0900)]
tracing: Reject string operand in the histogram expression
Since the string type can not be the target of the addition / subtraction
operation, it must be rejected. Without this fix, the string type silently
converted to digits.
Link: https://lkml.kernel.org/r/162742654278.290973.1523000673366456634.stgit@devnote2
Cc: stable@vger.kernel.org
Fixes:
100719dcef447 ("tracing: Add simple expression support to hist triggers")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Steven Rostedt (VMware) [Fri, 30 Jul 2021 21:19:51 +0000 (17:19 -0400)]
tracing / histogram: Give calculation hist_fields a size
When working on my user space applications, I found a bug in the synthetic
event code where the automated synthetic event field was not matching the
event field calculation it was attached to. Looking deeper into it, it was
because the calculation hist_field was not given a size.
The synthetic event fields are matched to their hist_fields either by
having the field have an identical string type, or if that does not match,
then the size and signed values are used to match the fields.
The problem arose when I tried to match a calculation where the fields
were "unsigned int". My tool created a synthetic event of type "u32". But
it failed to match. The string was:
diff=field1-field2:onmatch(event).trace(synth,$diff)
Adding debugging into the kernel, I found that the size of "diff" was 0.
And since it was given "unsigned int" as a type, the histogram fallback
code used size and signed. The signed matched, but the size of u32 (4) did
not match zero, and the event failed to be created.
This can be worse if the field you want to match is not one of the
acceptable fields for a synthetic event. As event fields can have any type
that is supported in Linux, this can cause an issue. For example, if a
type is an enum. Then there's no way to use that with any calculations.
Have the calculation field simply take on the size of what it is
calculating.
Link: https://lkml.kernel.org/r/20210730171951.59c7743f@oasis.local.home
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org
Fixes:
100719dcef447 ("tracing: Add simple expression support to hist triggers")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Linus Torvalds [Wed, 4 Aug 2021 19:41:30 +0000 (12:41 -0700)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Seven fixes, five in drivers.
The two core changes are a trivial warning removal in scsi_scan.c and
a change to rescan for capacity when a device makes a user induced
(via a write to the state variable) offline->running transition to fix
issues with device mapper"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: core: Fix capacity set to zero after offlinining device
scsi: sr: Return correct event when media event code is 3
scsi: ibmvfc: Fix command state accounting and stale response detection
scsi: core: Avoid printing an error if target_alloc() returns -ENXIO
scsi: scsi_dh_rdac: Avoid crash during rdac_bus_attach()
scsi: megaraid_mm: Fix end of loop tests for list_for_each_entry()
scsi: pm80xx: Fix TMF task completion race condition
Linus Torvalds [Wed, 4 Aug 2021 19:31:53 +0000 (12:31 -0700)]
Merge tag 'gpio-updates-for-v5.14-rc5' of git://git./linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- revert a patch intruducing breakage in interrupt handling in
gpio-mpc8xxx
- correctly handle missing IRQs in gpio-tqmx86 by really making them
optional
* tag 'gpio-updates-for-v5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: tqmx86: really make IRQ optional
Revert "gpio: mpc8xxx: change the gpio interrupt flags."
Maxim Levitsky [Wed, 4 Aug 2021 11:20:57 +0000 (14:20 +0300)]
KVM: selftests: fix hyperv_clock test
The test was mistakenly using addr_gpa2hva on a gva and that happened
to work accidentally. Commit
106a2e766eae ("KVM: selftests: Lower the
min virtual address for misc page allocations") revealed this bug.
Fixes:
2c7f76b4c42b ("selftests: kvm: Add basic Hyper-V clocksources tests", 2021-03-18)
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <
20210804112057.409498-1-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Mingwei Zhang [Mon, 2 Aug 2021 18:09:03 +0000 (11:09 -0700)]
KVM: SVM: improve the code readability for ASID management
KVM SEV code uses bitmaps to manage ASID states. ASID 0 was always skipped
because it is never used by VM. Thus, in existing code, ASID value and its
bitmap postion always has an 'offset-by-1' relationship.
Both SEV and SEV-ES shares the ASID space, thus KVM uses a dynamic range
[min_asid, max_asid] to handle SEV and SEV-ES ASIDs separately.
Existing code mixes the usage of ASID value and its bitmap position by
using the same variable called 'min_asid'.
Fix the min_asid usage: ensure that its usage is consistent with its name;
allocate extra size for ASID 0 to ensure that each ASID has the same value
with its bitmap position. Add comments on ASID bitmap allocation to clarify
the size change.
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Marc Orr <marcorr@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Alper Gun <alpergun@google.com>
Cc: Dionna Glaze <dionnaglaze@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vipin Sharma <vipinsh@google.com>
Cc: Peter Gonda <pgonda@google.com>
Cc: Joerg Roedel <joro@8bytes.org>
Message-Id: <
20210802180903.159381-1-mizhang@google.com>
[Fix up sev_asid_free to also index by ASID, as suggested by Sean
Christopherson, and use nr_asids in sev_cpu_init. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ivan T. Ivanov [Wed, 4 Aug 2021 08:13:39 +0000 (11:13 +0300)]
net: usb: lan78xx: don't modify phy_device state concurrently
Currently phy_device state could be left in inconsistent state shown
by following alert message[1]. This is because phy_read_status could
be called concurrently from lan78xx_delayedwork, phy_state_machine and
__ethtool_get_link. Fix this by making sure that phy_device state is
updated atomically.
[1] lan78xx 1-1.1.1:1.0 eth0: No phy led trigger registered for speed(-1)
Signed-off-by: Ivan T. Ivanov <iivanov@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Tue, 3 Aug 2021 23:14:15 +0000 (16:14 -0700)]
docs: networking: netdevsim rules
There are aspects of netdevsim which are commonly
misunderstood and pointed out in review. Cong
suggest we document them.
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sean Christopherson [Tue, 3 Aug 2021 16:27:46 +0000 (09:27 -0700)]
KVM: SVM: Fix off-by-one indexing when nullifying last used SEV VMCB
Use the raw ASID, not ASID-1, when nullifying the last used VMCB when
freeing an SEV ASID. The consumer, pre_sev_run(), indexes the array by
the raw ASID, thus KVM could get a false negative when checking for a
different VMCB if KVM manages to reallocate the same ASID+VMCB combo for
a new VM.
Note, this cannot cause a functional issue _in the current code_, as
pre_sev_run() also checks which pCPU last did VMRUN for the vCPU, and
last_vmentry_cpu is initialized to -1 during vCPU creation, i.e. is
guaranteed to mismatch on the first VMRUN. However, prior to commit
8a14fe4f0c54 ("kvm: x86: Move last_cpu into kvm_vcpu_arch as
last_vmentry_cpu"), SVM tracked pCPU on its own and zero-initialized the
last_cpu variable. Thus it's theoretically possible that older versions
of KVM could miss a TLB flush if the first VMRUN is on pCPU0 and the ASID
and VMCB exactly match those of a prior VM.
Fixes:
70cd94e60c73 ("KVM: SVM: VMRUN should use associated ASID when SEV is enabled")
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 4 Aug 2021 09:28:52 +0000 (05:28 -0400)]
KVM: Do not leak memory for duplicate debugfs directories
KVM creates a debugfs directory for each VM in order to store statistics
about the virtual machine. The directory name is built from the process
pid and a VM fd. While generally unique, it is possible to keep a
file descriptor alive in a way that causes duplicate directories, which
manifests as these messages:
[ 471.846235] debugfs: Directory '20245-4' with parent 'kvm' already present!
Even though this should not happen in practice, it is more or less
expected in the case of KVM for testcases that call KVM_CREATE_VM and
close the resulting file descriptor repeatedly and in parallel.
When this happens, debugfs_create_dir() returns an error but
kvm_create_vm_debugfs() goes on to allocate stat data structs which are
later leaked. The slow memory leak was spotted by syzkaller, where it
caused OOM reports.
Since the issue only affects debugfs, do a lookup before calling
debugfs_create_dir, so that the message is downgraded and rate-limited.
While at it, ensure kvm->debugfs_dentry is NULL rather than an error
if it is not created. This fixes kvm_destroy_vm_debugfs, which was not
checking IS_ERR_OR_NULL correctly.
Cc: stable@vger.kernel.org
Fixes:
536a6f88c49d ("KVM: Create debugfs dir and stat files for each VM")
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David S. Miller [Wed, 4 Aug 2021 09:45:41 +0000 (10:45 +0100)]
Merge branch 'master' of git://git./linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2021-08-04
1) Fix a sysbot reported memory leak in xfrm_user_rcv_msg.
From Pavel Skripkin.
2) Revert "xfrm: policy: Read seqcount outside of rcu-read side
in xfrm_policy_lookup_bytype". This commit tried to fix a
lockin bug, but only cured some of the symptoms. A proper
fix is applied on top of this revert.
3) Fix a locking bug on xfrm state hash resize. A recent change
on sequence counters accidentally repaced a spinlock by a mutex.
Fix from Frederic Weisbecker.
4) Fix possible user-memory-access in xfrm_user_rcv_msg_compat().
From Dmitry Safonov.
5) Add initialiation sefltest fot xfrm_spdattr_type_t.
From Dmitry Safonov.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 4 Aug 2021 09:38:42 +0000 (10:38 +0100)]
Merge branch 'pegasus-errors'
Petko Manolov says:
====================
net: usb: pegasus: better error checking and DRIVER_VERSION removal
v3:
Pavel Skripkin again: make sure -ETIMEDOUT is returned by __mii_op() on timeout
condition;
v2:
Special thanks to Pavel Skripkin for the review and who caught a few bugs.
setup_pegasus_II() would not print an erroneous message on the success path.
v1:
Add error checking for get_registers() and derivatives. If the usb transfer
fail then just don't use the buffer where the legal data should have been
returned.
Remove DRIVER_VERSION per Greg KH request.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Petko Manolov [Tue, 3 Aug 2021 17:25:24 +0000 (20:25 +0300)]
net: usb: pegasus: Remove the changelog and DRIVER_VERSION.
These are now deemed redundant.
Signed-off-by: Petko Manolov <petkan@nucleusys.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Petko Manolov [Tue, 3 Aug 2021 17:25:23 +0000 (20:25 +0300)]
net: usb: pegasus: Check the return value of get_geristers() and friends;
Certain call sites of get_geristers() did not do proper error handling. This
could be a problem as get_geristers() typically return the data via pointer to a
buffer. If an error occurred the code is carelessly manipulating the wrong data.
Signed-off-by: Petko Manolov <petkan@nucleusys.com>
Reviewed-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Leon Romanovsky [Tue, 3 Aug 2021 12:00:43 +0000 (15:00 +0300)]
net/prestera: Fix devlink groups leakage in error flow
Devlink trap group is registered but not released in error flow,
add the missing devlink_trap_groups_unregister() call.
Fixes:
0a9003f45e91 ("net: marvell: prestera: devlink: add traps/groups implementation")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yunsheng Lin [Tue, 3 Aug 2021 10:58:21 +0000 (18:58 +0800)]
net: sched: fix lockdep_set_class() typo error for sch->seqlock
According to comment in qdisc_alloc(), sch->seqlock's lockdep
class key should be set to qdisc_tx_busylock, due to possible
type error, sch->busylock's lockdep class key is set to
qdisc_tx_busylock, which is duplicated because sch->busylock's
lockdep class key is already set in qdisc_alloc().
So fix it by replacing sch->busylock with sch->seqlock.
Fixes:
96009c7d500e ("sched: replace __QDISC_STATE_RUNNING bit with a spin lock")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yajun Deng [Thu, 29 Jul 2021 08:20:21 +0000 (16:20 +0800)]
netfilter: nf_conntrack_bridge: Fix memory leak when error
It should be added kfree_skb_list() when err is not equal to zero
in nf_br_ip_fragment().
v2: keep this aligned with IPv6.
v3: modify iter.frag_list to iter.frag.
Fixes:
3c171f496ef5 ("netfilter: bridge: add connection tracking system")
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Jozsef Kadlecsik [Wed, 28 Jul 2021 15:01:15 +0000 (17:01 +0200)]
netfilter: ipset: Limit the maximal range of consecutive elements to add/delete
The range size of consecutive elements were not limited. Thus one could
define a huge range which may result soft lockup errors due to the long
execution time. Now the range size is limited to 2^20 entries.
Reported-by: Brad Spengler <spender@grsecurity.net>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Oleksij Rempel [Tue, 3 Aug 2021 06:37:46 +0000 (08:37 +0200)]
net: dsa: qca: ar9331: reorder MDIO write sequence
In case of this switch we work with 32bit registers on top of 16bit
bus. Some registers (for example access to forwarding database) have
trigger bit on the first 16bit half of request and the result +
configuration of request in the second half. Without this patch, we would
trigger database operation and overwrite result in one run.
To make it work properly, we should do the second part of transfer
before the first one is done.
So far, this rule seems to work for all registers on this switch.
Fixes:
ec6698c272de ("net: dsa: add support for Atheros AR9331 built-in switch")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20210803063746.3600-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Harshavardhan Unnibhavi [Mon, 2 Aug 2021 17:35:06 +0000 (19:35 +0200)]
VSOCK: handle VIRTIO_VSOCK_OP_CREDIT_REQUEST
The original implementation of the virtio-vsock driver does not
handle a VIRTIO_VSOCK_OP_CREDIT_REQUEST as required by the
virtio-vsock specification. The vsock device emulated by
vhost-vsock and the virtio-vsock driver never uses this request,
which was probably why nobody noticed it. However, another
implementation of the device may use this request type.
Hence, this commit introduces a way to handle an explicit credit
request by responding with a corresponding credit update as
required by the virtio-vsock specification.
Fixes:
06a8fc78367d ("VSOCK: Introduce virtio_vsock_common.ko")
Signed-off-by: Harshavardhan Unnibhavi <harshanavkis@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20210802173506.2383-1-harshanavkis@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geliang Tang [Mon, 2 Aug 2021 23:19:14 +0000 (16:19 -0700)]
mptcp: drop unused rcu member in mptcp_pm_addr_entry
kfree_rcu() had been removed from pm_netlink.c, so this rcu field in
struct mptcp_pm_addr_entry became useless. Let's drop it.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Link: https://lore.kernel.org/r/20210802231914.54709-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Tue, 3 Aug 2021 16:33:05 +0000 (09:33 -0700)]
Merge tag 'media/v5.14-2' of git://git./linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- regression fix for the rtl28xxu I2C logic
- build fix for the atmel driver
- videobuf2-core: dequeue if start_streaming fails
* tag 'media/v5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: atmel: fix build when ISC=m and XISC=y
media: videobuf2-core: dequeue if start_streaming fails
media: rtl28xxu: fix zero-length control request
media: Revert "media: rtl28xxu: fix zero-length control request"
Linus Torvalds [Tue, 3 Aug 2021 16:26:09 +0000 (09:26 -0700)]
Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A collection of clk driver fixes and one core clk API fix:
- Fix stm32 clk data to avoid a crash early on
- Fix a randconfig build error in HiSilicon clk driver
- Avoid an oops at boot on Qualcomm MSM8936 SoCs due to
an improper consolidation of structs
- Fix imbalanced disabling of the unused MMC clock on
Tegra210 Jetson Nano
- Plug a memory leak in devm_clk_bulk_get_all() unwind
path"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: fix leak on devm_clk_bulk_get_all() unwind
clk: tegra: Implement disable_unused() of tegra_clk_sdmmc_mux_ops
clk: qcom: smd-rpm: Fix MSM8936 RPM_SMD_PCNOC_A_CLK
clk: hisilicon: hi3559a: select RESET_HISI
clk: stm32f4: fix post divisor setup for I2S/SAI PLLs
Heiko Carstens [Sat, 31 Jul 2021 11:13:40 +0000 (13:13 +0200)]
s390: update defconfigs
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Antoine Tenart [Tue, 3 Aug 2021 10:00:16 +0000 (12:00 +0200)]
net: ipv6: fix returned variable type in ip6_skb_dst_mtu
The patch fixing the returned value of ip6_skb_dst_mtu (int -> unsigned
int) was rebased between its initial review and the version applied. In
the meantime
fade56410c22 was applied, which added a new variable (int)
used as the returned value. This lead to a mismatch between the function
prototype and the variable used as the return value.
Fixes:
40fc3054b458 ("net: ipv6: fix return value of ip6_skb_dst_mtu")
Cc: Vadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fei Qin [Tue, 3 Aug 2021 10:39:11 +0000 (12:39 +0200)]
nfp: update ethtool reporting of pauseframe control
Pauseframe control is set to symmetric mode by default on the NFP.
Pause frames can not be configured through ethtool now, but ethtool can
report the supported mode.
Fixes:
265aeb511bd5 ("nfp: add support for .get_link_ksettings()")
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bijie Xu [Tue, 3 Aug 2021 09:40:19 +0000 (11:40 +0200)]
net: sched: provide missing kdoc for tcf_pkt_info and tcf_ematch_ops
Provide missing kdoc of fields of struct tcf_pkt_info and tcf_ematch_ops.
Found using ./scripts/kernel-doc -none -Werror include/net/pkt_cls.h
Signed-off-by: Bijie Xu <bijie.xu@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bijie Xu [Tue, 3 Aug 2021 09:40:18 +0000 (11:40 +0200)]
net: flow_offload: correct comments mismatch with code
Correct mismatch between the name of flow_offload_has_one_action()
and its kdoc entry.
Found using ./scripts/kernel-doc -Werror -none include/net/flow_offload.h
Signed-off-by: Bijie Xu <bijie.xu@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Mon, 2 Aug 2021 15:21:53 +0000 (17:21 +0200)]
net: sparx5: fix bitmask on 32-bit targets
I saw the build failure that was fixed in commit
6387f65e2acb ("net:
sparx5: fix compiletime_assert for GCC 4.9") and noticed another
issue that was introduced in the same patch: Using GENMASK() to
create a 64-bit mask does not work on 32-bit architectures.
This probably won't ever happen on this driver since it's specific
to a 64-bit SoC, but it's better to write it portably, so use
GENMASK_ULL() instead.
Fixes:
f3cad2611a77 ("net: sparx5: add hostmode with phylink support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Sun, 1 Aug 2021 06:25:31 +0000 (02:25 -0400)]
sctp: move the active_key update after sh_keys is added
In commit
58acd1009226 ("sctp: update active_key for asoc when old key is
being replaced"), sctp_auth_asoc_init_active_key() is called to update
the active_key right after the old key is deleted and before the new key
is added, and it caused that the active_key could be found with the key_id.
In Ying Xu's testing, the BUG_ON in sctp_auth_asoc_init_active_key() was
triggered:
[ ] kernel BUG at net/sctp/auth.c:416!
[ ] RIP: 0010:sctp_auth_asoc_init_active_key.part.8+0xe7/0xf0 [sctp]
[ ] Call Trace:
[ ] sctp_auth_set_key+0x16d/0x1b0 [sctp]
[ ] sctp_setsockopt.part.33+0x1ba9/0x2bd0 [sctp]
[ ] __sys_setsockopt+0xd6/0x1d0
[ ] __x64_sys_setsockopt+0x20/0x30
[ ] do_syscall_64+0x5b/0x1a0
So fix it by moving the active_key update after sh_keys is added.
Fixes:
58acd1009226 ("sctp: update active_key for asoc when old key is being replaced")
Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vitaly Kuznetsov [Fri, 30 Jul 2021 12:26:25 +0000 (14:26 +0200)]
KVM: selftests: Test access to XMM fast hypercalls
Check that #UD is raised if bit 16 is clear in
HYPERV_CPUID_FEATURES.EDX and an 'XMM fast' hypercall is issued.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Siddharth Chandrasekaran <sidcha@amazon.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20210730122625.112848-5-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vitaly Kuznetsov [Fri, 30 Jul 2021 12:26:24 +0000 (14:26 +0200)]
KVM: x86: hyper-v: Check if guest is allowed to use XMM registers for hypercall input
TLFS states that "Availability of the XMM fast hypercall interface is
indicated via the “Hypervisor Feature Identification” CPUID Leaf
(0x40000003, see section 2.4.4) ... Any attempt to use this interface
when the hypervisor does not indicate availability will result in a #UD
fault."
Implement the check for 'strict' mode (KVM_CAP_HYPERV_ENFORCE_CPUID).
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Siddharth Chandrasekaran <sidcha@amazon.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20210730122625.112848-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vitaly Kuznetsov [Fri, 30 Jul 2021 12:26:23 +0000 (14:26 +0200)]
KVM: x86: Introduce trace_kvm_hv_hypercall_done()
Hypercall failures are unusual with potentially far going consequences
so it would be useful to see their results when tracing.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Siddharth Chandrasekaran <sidcha@amazon.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20210730122625.112848-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vitaly Kuznetsov [Fri, 30 Jul 2021 12:26:22 +0000 (14:26 +0200)]
KVM: x86: hyper-v: Check access to hypercall before reading XMM registers
In case guest doesn't have access to the particular hypercall we can avoid
reading XMM registers.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Siddharth Chandrasekaran <sidcha@amazon.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20210730122625.112848-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David S. Miller [Tue, 3 Aug 2021 10:14:03 +0000 (11:14 +0100)]
net: really fix the build...
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Sun, 1 Aug 2021 23:17:30 +0000 (02:17 +0300)]
net: bridge: validate the NUD_PERMANENT bit when adding an extern_learn FDB entry
Currently it is possible to add broken extern_learn FDB entries to the
bridge in two ways:
1. Entries pointing towards the bridge device that are not local/permanent:
ip link add br0 type bridge
bridge fdb add 00:01:02:03:04:05 dev br0 self extern_learn static
2. Entries pointing towards the bridge device or towards a port that
are marked as local/permanent, however the bridge does not process the
'permanent' bit in any way, therefore they are recorded as though they
aren't permanent:
ip link add br0 type bridge
bridge fdb add 00:01:02:03:04:05 dev br0 self extern_learn permanent
Since commit
52e4bec15546 ("net: bridge: switchdev: treat local FDBs the
same as entries towards the bridge"), these incorrect FDB entries can
even trigger NULL pointer dereferences inside the kernel.
This is because that commit made the assumption that all FDB entries
that are not local/permanent have a valid destination port. For context,
local / permanent FDB entries either have fdb->dst == NULL, and these
point towards the bridge device and are therefore local and not to be
used for forwarding, or have fdb->dst == a net_bridge_port structure
(but are to be treated in the same way, i.e. not for forwarding).
That assumption _is_ correct as long as things are working correctly in
the bridge driver, i.e. we cannot logically have fdb->dst == NULL under
any circumstance for FDB entries that are not local. However, the
extern_learn code path where FDB entries are managed by a user space
controller show that it is possible for the bridge kernel driver to
misinterpret the NUD flags of an entry transmitted by user space, and
end up having fdb->dst == NULL while not being a local entry. This is
invalid and should be rejected.
Before, the two commands listed above both crashed the kernel in this
check from br_switchdev_fdb_notify:
struct net_device *dev = info.is_local ? br->dev : dst->dev;
info.is_local == false, dst == NULL.
After this patch, the invalid entry added by the first command is
rejected:
ip link add br0 type bridge && bridge fdb add 00:01:02:03:04:05 dev br0 self extern_learn static; ip link del br0
Error: bridge: FDB entry towards bridge must be permanent.
and the valid entry added by the second command is properly treated as a
local address and does not crash br_switchdev_fdb_notify anymore:
ip link add br0 type bridge && bridge fdb add 00:01:02:03:04:05 dev br0 self extern_learn permanent; ip link del br0
Fixes:
eb100e0e24a2 ("net: bridge: allow to add externally learned entries from user-space")
Reported-by: syzbot+9ba1174359adba5a5b7c@syzkaller.appspotmail.com
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/r/20210801231730.7493-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthias Schiffer [Fri, 16 Jul 2021 10:00:47 +0000 (12:00 +0200)]
gpio: tqmx86: really make IRQ optional
The tqmx86 MFD driver was passing IRQ 0 for "no IRQ" in the past. This
causes warnings with newer kernels.
Prepare the gpio-tqmx86 driver for the fixed MFD driver by handling a
missing IRQ properly.
Fixes:
b868db94a6a7 ("gpio: tqmx86: Add GPIO from for this IO controller")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Jakub Kicinski [Mon, 2 Aug 2021 14:30:29 +0000 (07:30 -0700)]
Revert "mhi: Fix networking tree build."
This reverts commit
40e159403896f7d55c98f858d0b20fee1d941fa4.
Looks like this commit breaks the build for me.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Sat, 31 Jul 2021 14:40:52 +0000 (07:40 -0700)]
docs: operstates: document IF_OPER_TESTING
IF_OPER_TESTING is in fact used today.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Sat, 31 Jul 2021 14:40:07 +0000 (07:40 -0700)]
docs: operstates: fix typo
TVL -> TLV
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Sat, 31 Jul 2021 14:39:17 +0000 (07:39 -0700)]
net: sparx5: fix compiletime_assert for GCC 4.9
Stephen reports sparx5 broke GCC 4.9 build.
Move the compiletime_assert() out of the static function.
Compile-tested only, no object code changes.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes:
f3cad2611a77 ("net: sparx5: add hostmode with phylink support")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wang Hai [Sat, 31 Jul 2021 06:38:01 +0000 (14:38 +0800)]
net: natsemi: Fix missing pci_disable_device() in probe and remove
Replace pci_enable_device() with pcim_enable_device(),
pci_disable_device() and pci_release_regions() will be
called in release automatically.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steve Bennett [Fri, 30 Jul 2021 22:57:50 +0000 (08:57 +1000)]
net: phy: micrel: Fix detection of ksz87xx switch
The logic for discerning between KSZ8051 and KSZ87XX PHYs is incorrect
such that the that KSZ87XX switch is not identified correctly.
ksz8051_ksz8795_match_phy_device() uses the parameter ksz_phy_id
to discriminate whether it was called from ksz8051_match_phy_device()
or from ksz8795_match_phy_device() but since PHY_ID_KSZ87XX is the
same value as PHY_ID_KSZ8051, this doesn't work.
Instead use a bool to discriminate the caller.
Without this patch, the KSZ8795 switch port identifies as:
ksz8795-switch spi3.1 ade1 (uninitialized): PHY [dsa-0.1:03] driver [Generic PHY]
With the patch, it identifies correctly:
ksz8795-switch spi3.1 ade1 (uninitialized): PHY [dsa-0.1:03] driver [Micrel KSZ87XX Switch]
Fixes:
8b95599c55ed24b36cf4 ("net: phy: micrel: Discern KSZ8051 and KSZ8795 PHYs")
Signed-off-by: Steve Bennett <steveb@workware.net.au>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xiu Jianfeng [Thu, 29 Jul 2021 03:16:44 +0000 (11:16 +0800)]
selinux: correct the return value when loads initial sids
It should not return 0 when SID 0 is assigned to isids.
This patch fixes it.
Cc: stable@vger.kernel.org
Fixes:
e3e0b582c321a ("selinux: remove unused initial SIDs and improve handling")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
[PM: remove changelog from description]
Signed-off-by: Paul Moore <paul@paul-moore.com>
David S. Miller [Mon, 2 Aug 2021 13:28:28 +0000 (14:28 +0100)]
Merge branch 'sja1105-fdb-fixes'
Vladimir Oltean says:
====================
FDB fixes for NXP SJA1105
I have some upcoming patches that make heavy use of statically installed
FDB entries, and when testing them on SJA1105P/Q/R/S and SJA1110, it
became clear that these switches do not behave reliably at all.
- On SJA1110, a static FDB entry cannot be installed at all
- On SJA1105P/Q/R/S, it is very picky about the inner/outer VLAN type
- Dynamically learned entries will make us not install static ones, or
even if we do, they might not take effect
Patch 5/6 has a conflict with net-next (sorry), the commit message of
that patch describes how to deal with it. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Fri, 30 Jul 2021 17:18:15 +0000 (20:18 +0300)]
net: dsa: sja1105: match FDB entries regardless of inner/outer VLAN tag
On SJA1105P/Q/R/S and SJA1110, the L2 Lookup Table entries contain a
maskable "inner/outer tag" bit which means:
- when set to 1: match single-outer and double tagged frames
- when set to 0: match untagged and single-inner tagged frames
- when masked off: match all frames regardless of the type of tag
This driver does not make any meaningful distinction between inner tags
(matches on TPID) and outer tags (matches on TPID2). In fact, all VLAN
table entries are installed as SJA1110_VLAN_D_TAG, which means that they
match on both inner and outer tags.
So it does not make sense that we install FDB entries with the IOTAG bit
set to 1.
In VLAN-unaware mode, we set both TPID and TPID2 to 0xdadb, so the
switch will see frames as outer-tagged or double-tagged (never inner).
So the FDB entries will match if IOTAG is set to 1.
In VLAN-aware mode, we set TPID to 0x8100 and TPID2 to 0x88a8. So the
switch will see untagged and 802.1Q-tagged packets as inner-tagged, and
802.1ad-tagged packets as outer-tagged. So untagged and 802.1Q-tagged
packets will not match FDB entries if IOTAG is set to 1, but 802.1ad
tagged packets will. Strange.
To fix this, simply mask off the IOTAG bit from FDB entries, and make
them match regardless of whether the VLAN tag is inner or outer.
Fixes:
1da73821343c ("net: dsa: sja1105: Add FDB operations for P/Q/R/S series")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Fri, 30 Jul 2021 17:18:14 +0000 (20:18 +0300)]
net: dsa: sja1105: be stateless with FDB entries on SJA1105P/Q/R/S/SJA1110 too
Similar but not quite the same with what was done in commit
b11f0a4c0c81
("net: dsa: sja1105: be stateless when installing FDB entries") for
SJA1105E/T, it is desirable to drop the priv->vlan_aware check and
simply go ahead and install FDB entries in the VLAN that was given by
the bridge.
As opposed to SJA1105E/T, in SJA1105P/Q/R/S and SJA1110, the FDB is a
maskable TCAM, and we are installing VLAN-unaware FDB entries with the
VLAN ID masked off. However, such FDB entries might completely obscure
VLAN-aware entries where the VLAN ID is included in the search mask,
because the switch looks up the FDB from left to right and picks the
first entry which results in a masked match. So it depends on whether
the bridge installs first the VLAN-unaware or the VLAN-aware FDB entries.
Anyway, if we had a VLAN-unaware FDB entry towards one set of DESTPORTS
and a VLAN-aware one towards other set of DESTPORTS, the result is that
the packets in VLAN-aware mode will be forwarded towards the DESTPORTS
specified by the VLAN-unaware entry.
To solve this, simply do not use the masked matching ability of the FDB
for VLAN ID, and always match precisely on it. In VLAN-unaware mode, we
configure the switch for shared VLAN learning, so the VLAN ID will be
ignored anyway during lookup, so it is redundant to mask it off in the
TCAM.
This patch conflicts with net-next commit
0fac6aa098ed ("net: dsa: sja1105:
delete the best_effort_vlan_filtering mode") which changed this line:
if (priv->vlan_state != SJA1105_VLAN_UNAWARE) {
into:
if (priv->vlan_aware) {
When merging with net-next, the lines added by this patch should take
precedence in the conflict resolution (i.e. the "if" condition should be
deleted in both cases).
Fixes:
1da73821343c ("net: dsa: sja1105: Add FDB operations for P/Q/R/S series")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Fri, 30 Jul 2021 17:18:13 +0000 (20:18 +0300)]
net: dsa: sja1105: ignore the FDB entry for unknown multicast when adding a new address
Currently, when sja1105pqrs_fdb_add() is called for a host-joined IPv6
MDB entry such as 33:33:00:00:00:6a, the search for that address will
return the FDB entry for SJA1105_UNKNOWN_MULTICAST, which has a
destination MAC of 01:00:00:00:00:00 and a mask of 01:00:00:00:00:00.
It returns that entry because, well, it matches, in the sense that
unknown multicast is supposed by design to match it...
But the issue is that we then proceed to overwrite this entry with the
one for our precise host-joined multicast address, and the unknown
multicast entry is no longer there - unknown multicast is now flooded to
the same group of ports as broadcast, which does not look up the FDB.
To solve this problem, we should ignore searches that return the unknown
multicast address as the match, and treat them as "no match" which will
result in the entry being installed to hardware.
For this to work properly, we need to put the result of the FDB search
in a temporary variable in order to avoid overwriting the l2_lookup
entry we want to program. The l2_lookup entry returned by the search
might not have the same set of DESTPORTS and not even the same MACADDR
as the entry we're trying to add.
Fixes:
4d9423549501 ("net: dsa: sja1105: offload bridge port flags to device")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Fri, 30 Jul 2021 17:18:12 +0000 (20:18 +0300)]
net: dsa: sja1105: invalidate dynamic FDB entries learned concurrently with statically added ones
The procedure to add a static FDB entry in sja1105 is concurrent with
dynamic learning performed on all bridge ports and the CPU port.
The switch looks up the FDB from left to right, and also learns
dynamically from left to right, so it is possible that between the
moment when we pick up a free slot to install an FDB entry, another slot
to the left of that one becomes free due to an address ageing out, and
that other slot is then immediately used by the switch to learn
dynamically the same address as we're trying to add statically.
The result is that we succeeded to add our static FDB entry, but it is
being shadowed by a dynamic FDB entry to its left, and the switch will
behave as if our static FDB entry did not exist.
We cannot really prevent this from happening unless we make the entire
process to add a static FDB entry a huge critical section where address
learning is temporarily disabled on _all_ ports, and then re-enabled
according to the configuration done by sja1105_port_set_learning.
However, that is kind of disruptive for the operation of the network.
What we can do alternatively is to simply read back the FDB for dynamic
entries located before our newly added static one, and delete them.
This will guarantee that our static FDB entry is now operational. It
will still not guarantee that there aren't dynamic FDB entries to the
_right_ of that static FDB entry, but at least those entries will age
out by themselves since they aren't hit, and won't bother anyone.
Fixes:
291d1e72b756 ("net: dsa: sja1105: Add support for FDB and MDB management")
Fixes:
1da73821343c ("net: dsa: sja1105: Add FDB operations for P/Q/R/S series")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Fri, 30 Jul 2021 17:18:11 +0000 (20:18 +0300)]
net: dsa: sja1105: overwrite dynamic FDB entries with static ones in .port_fdb_add
The SJA1105 switch family leaves it up to software to decide where
within the FDB to install a static entry, and to concatenate destination
ports for already existing entries (the FDB is also used for multicast
entries), it is not as simple as just saying "please add this entry".
This means we first need to search for an existing FDB entry before
adding a new one. The driver currently manages to fool itself into
thinking that if an FDB entry already exists, there is nothing to be
done. But that FDB entry might be dynamically learned, case in which it
should be replaced with a static entry, but instead it is left alone.
This patch checks the LOCKEDS ("locked/static") bit from found FDB
entries, and lets the code "goto skip_finding_an_index;" if the FDB
entry was not static. So we also need to move the place where we set
LOCKEDS = true, to cover the new case where a dynamic FDB entry existed
but was dynamic.
Fixes:
291d1e72b756 ("net: dsa: sja1105: Add support for FDB and MDB management")
Fixes:
1da73821343c ("net: dsa: sja1105: Add FDB operations for P/Q/R/S series")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Fri, 30 Jul 2021 17:18:10 +0000 (20:18 +0300)]
net: dsa: sja1105: fix static FDB writes for SJA1110
The blamed commit made FDB access on SJA1110 functional only as far as
dumping the existing entries goes, but anything having to do with an
entry's index (adding, deleting) is still broken.
There are in fact 2 problems, all caused by improperly inheriting the
code from SJA1105P/Q/R/S:
- An entry size is SJA1110_SIZE_L2_LOOKUP_ENTRY (24) bytes and not
SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY (20) bytes
- The "index" field within an FDB entry is at bits 10:1 for SJA1110 and
not 15:6 as in SJA1105P/Q/R/S
This patch moves the packing function for the cmd->index outside of
sja1105pqrs_common_l2_lookup_cmd_packing() and into the device specific
functions sja1105pqrs_l2_lookup_cmd_packing and
sja1110_l2_lookup_cmd_packing.
Fixes:
74e7feff0e22 ("net: dsa: sja1105: fix dynamic access to L2 Address Lookup table for SJA1110")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 2 Aug 2021 11:21:30 +0000 (12:21 +0100)]
mhi: Fix networking tree build.
Signed-off-by: David S. Miller <davem@davemloft.net>
Yannick Vignon [Fri, 30 Jul 2021 16:53:21 +0000 (18:53 +0200)]
net/sched: taprio: Fix init procedure
Commit
13511704f8d759 ("net: taprio offload: enforce qdisc to netdev queue mapping")
resulted in duplicate entries in the qdisc hash.
While this did not impact the overall operation of the qdisc and taprio
code paths, it did result in an infinite loop when dumping the qdisc
properties, at least on one target (NXP LS1028 ARDB).
Removing the duplicate call to qdisc_hash_add() solves the problem.
Fixes:
13511704f8d759 ("net: taprio offload: enforce qdisc to netdev queue mapping")
Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Sitnicki [Thu, 29 Jul 2021 13:48:20 +0000 (15:48 +0200)]
net, gro: Set inner transport header offset in tcp/udp GRO hook
GSO expects inner transport header offset to be valid when
skb->encapsulation flag is set. GSO uses this value to calculate the length
of an individual segment of a GSO packet in skb_gso_transport_seglen().
However, tcp/udp gro_complete callbacks don't update the
skb->inner_transport_header when processing an encapsulated TCP/UDP
segment. As a result a GRO skb has ->inner_transport_header set to a value
carried over from earlier skb processing.
This can have mild to tragic consequences. From miscalculating the GSO
segment length to triggering a page fault [1], when trying to read TCP/UDP
header at an address past the skb->data page.
The latter scenario leads to an oops report like so:
BUG: unable to handle page fault for address:
ffff9fa7ec00d008
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD
123f201067 P4D
123f201067 PUD
123f209067 PMD 0
Oops: 0000 [#1] SMP NOPTI
CPU: 44 PID: 0 Comm: swapper/44 Not tainted 5.4.53-cloudflare-2020.7.21 #1
Hardware name: HYVE EDGE-METAL-GEN10/HS-1811DLite1, BIOS V2.15 02/21/2020
RIP: 0010:skb_gso_transport_seglen+0x44/0xa0
Code: c0 41 83 e0 11 f6 87 81 00 00 00 20 74 30 0f b7 87 aa 00 00 00 0f [...]
RSP: 0018:
ffffad8640bacbb8 EFLAGS:
00010202
RAX:
000000000000feda RBX:
ffff9fcc8d31bc00 RCX:
ffff9fa7ec00cffc
RDX:
ffff9fa7ebffdec0 RSI:
000000000000feda RDI:
0000000000000122
RBP:
00000000000005c4 R08:
0000000000000001 R09:
0000000000000000
R10:
ffff9fe588ae3800 R11:
ffff9fe011fc92f0 R12:
ffff9fcc8d31bc00
R13:
ffff9fe0119d4300 R14:
00000000000005c4 R15:
ffff9fba57d70900
FS:
0000000000000000(0000) GS:
ffff9fe68df00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
ffff9fa7ec00d008 CR3:
0000003e99b1c000 CR4:
0000000000340ee0
Call Trace:
<IRQ>
skb_gso_validate_network_len+0x11/0x70
__ip_finish_output+0x109/0x1c0
ip_sublist_rcv_finish+0x57/0x70
ip_sublist_rcv+0x2aa/0x2d0
? ip_rcv_finish_core.constprop.0+0x390/0x390
ip_list_rcv+0x12b/0x14f
__netif_receive_skb_list_core+0x2a9/0x2d0
netif_receive_skb_list_internal+0x1b5/0x2e0
napi_complete_done+0x93/0x140
veth_poll+0xc0/0x19f [veth]
? mlx5e_napi_poll+0x221/0x610 [mlx5_core]
net_rx_action+0x1f8/0x790
__do_softirq+0xe1/0x2bf
irq_exit+0x8e/0xc0
do_IRQ+0x58/0xe0
common_interrupt+0xf/0xf
</IRQ>
The bug can be observed in a simple setup where we send IP/GRE/IP/TCP
packets into a netns over a veth pair. Inside the netns, packets are
forwarded to dummy device:
trafgen -> [veth A]--[veth B] -forward-> [dummy]
For veth B to GRO aggregate packets on receive, it needs to have an XDP
program attached (for example, a trivial XDP_PASS). Additionally, for UDP,
we need to enable GSO_UDP_L4 feature on the device:
ip netns exec A ethtool -K AB rx-udp-gro-forwarding on
The last component is an artificial delay to increase the chances of GRO
batching happening:
ip netns exec A tc qdisc add dev AB root \
netem delay 200us slot 5ms 10ms packets 2 bytes 64k
With such a setup in place, the bug can be observed by tracing the skb
outer and inner offsets when GSO skb is transmitted from the dummy device:
tcp:
FUNC DEV SKB_LEN NH TH ENC INH ITH GSO_SIZE GSO_TYPE
ip_finish_output dumB 2830 270 290 1 294 254 1383 (tcpv4,gre,)
^^^
udp:
FUNC DEV SKB_LEN NH TH ENC INH ITH GSO_SIZE GSO_TYPE
ip_finish_output dumB 2818 270 290 1 294 254 1383 (gre,udp_l4,)
^^^
Fix it by updating the inner transport header offset in tcp/udp
gro_complete callbacks, similar to how {inet,ipv6}_gro_complete callbacks
update the inner network header offset, when skb->encapsulation flag is
set.
[1] https://lore.kernel.org/netdev/CAKxSbF01cLpZem2GFaUaifh0S-5WYViZemTicAg7FCHOnh6kug@mail.gmail.com/
Fixes:
bf296b125b21 ("tcp: Add GRO support")
Fixes:
f993bc25e519 ("net: core: handle encapsulation offloads when computing segment lengths")
Fixes:
e20cf8d3f1f7 ("udp: implement GRO for plain UDP sockets.")
Reported-by: Alex Forster <aforster@cloudflare.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prabhakar Kushwaha [Thu, 29 Jul 2021 11:43:06 +0000 (14:43 +0300)]
qede: fix crash in rmmod qede while automatic debug collection
A crash has been observed if rmmod is done while automatic debug
collection in progress. It is due to a race condition between
both of them.
To fix stop the sp_task during unload to avoid running qede_sp_task
even if they are schedule during removal process.
Signed-off-by: Alok Prasad <palok@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>