OSDN Git Service
Jan Kara [Wed, 2 Oct 2013 14:27:47 +0000 (16:27 +0200)]
vmw_vmci: Convert driver to use get_user_pages_fast()
Convert vmci_host_setup_notify() and qp_host_get_user_memory() to use
get_user_pages_fast() instead of get_user_pages(). Note that
qp_host_get_user_memory() was using mmap_sem for writing without an
apparent reason.
CC: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dasaratharaman Chandramouli [Fri, 4 Oct 2013 01:06:23 +0000 (18:06 -0700)]
misc: mic: Enable OSPM suspend and resume support.
This patch enables support for OSPM suspend and resume in the MIC
driver. During a host suspend event, the driver performs an
orderly shutdown of the cards if they are online. Upon resume, any
cards that were previously online before suspend are rebooted.
The driver performs an orderly shutdown of the card primarily to
ensure that applications in the card are terminated and mounted
devices are safely un-mounted before the card is powered down in
the event of an OSPM suspend.
The driver makes use of the MIC daemon to accomplish OSPM suspend
and resume. The driver registers a PM notifier per MIC device.
The devices get notified synchronously during PM_SUSPEND_PREPARE and
PM_POST_SUSPEND phases.
During the PM_SUSPEND_PREPARE phase, the driver performs one of the
following three tasks.
1) If the card is 'offline', the driver sets the card to a
'suspended' state and returns.
2) If the card is 'online', the driver initiates card shutdown by
setting the card state to suspending. This notifies the MIC
daemon which invokes shutdown and sets card state to 'suspended'.
The driver returns after the shutdown is complete.
3) If the card is already being shutdown, possibly by a host user
space application, the driver sets the card state to 'suspended'
and returns after the shutdown is complete.
During the PM_POST_SUSPEND phase, the driver simply notifies the
daemon and returns. The daemon boots those cards that were previously
online during the suspend phase.
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Signed-off-by: Harshavardhan R Kharche <harshavardhan.r.kharche@intel.com>
Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michal Simek [Mon, 30 Sep 2013 07:28:36 +0000 (09:28 +0200)]
char: hwicap: Remove unnecessary dev_set_drvdata()
Driver core clears the driver data to NULL after device_release
or on probe failure, so just remove it from here.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Walleij [Wed, 2 Oct 2013 11:46:47 +0000 (13:46 +0200)]
misc: bh1780: probe from compatible string
Currently the BH1780GLI I2C driver relies on the device tree node
having the right name, but this is fragile. Use the compatible
string to probe the driver instead.
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sudeep Dutt [Wed, 2 Oct 2013 23:09:00 +0000 (16:09 -0700)]
misc: mic: Fix build issues in sample daemon.
Specifying gcc format function attribute for mpsslog(..) and
building on 32 bit systems exposed a few build issues in the
sample MIC daemon which are fixed by this patch. Some of these
changes were authored by Joe Perches @
https://lkml.org/lkml/2013/9/27/419
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Caz Yokoyama <Caz.Yokoyama@intel.com>
Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tomas Winkler [Mon, 16 Sep 2013 20:44:48 +0000 (23:44 +0300)]
mei: amthif: mei_amthif_host_init: propagate errors from called functions
propagate error codes from called functions, they are correct.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tomas Winkler [Mon, 16 Sep 2013 20:44:47 +0000 (23:44 +0300)]
mei: revamp open handler counts
Make open counter to be incremented and decremented
from mei_cl_link and mei_cl_unlik function respectively
Nfc was assuming symmetric linking API and thus open handler
count was never decreased. This patch fixes that.
We need to add separate open hander count for amthif which
is handled out of link/unlink functions and doesn't break
the symmetric API.
Last we do not waste clients slots if amthif or wd are not present
in the device. we don't need to allocates slots ahead
it is all covered by link/unlink before the devices is responding
to user space connection and thus not racing on allocation
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tomas Winkler [Mon, 16 Sep 2013 20:44:46 +0000 (23:44 +0300)]
mei: simplify mei_open error handling
1. Perform simple checks first and only then attempt to allocate cl structure.
2. Remove open_handler_count test, this is already checked in mei_cl_link function
3. return -EMFILE instead of -ENOENT as expected by user space
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Mon, 30 Sep 2013 01:27:03 +0000 (18:27 -0700)]
Merge 3.12-rc3 into char-misc-next
We need/want the mei fixes in here so we can apply other updates that
are depending on them.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Sun, 29 Sep 2013 22:02:38 +0000 (15:02 -0700)]
Linux 3.12-rc3
Linus Torvalds [Sun, 29 Sep 2013 20:47:35 +0000 (13:47 -0700)]
Merge tag 'usb-3.12-rc3' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of USB driver fixes for 3.12-rc3.
These are all for host controller issues that have been reported, and
there's a fix for an annoying error message that gets printed every
time you remove a USB 3 device from the system that's been bugging me
for a while"
* tag 'usb-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: dwc3: add support for Merrifield
USB: fsl/ehci: fix failure of checking PHY_CLK_VALID during reinitialization
USB: Fix breakage in ffs_fs_mount()
fsl/usb: Resolve PHY_CLK_VLD instability issue for ULPI phy
usb/core/devio.c: Don't reject control message to endpoint with wrong direction bit
usb: chipidea: USB_CHIPIDEA should depend on HAS_DMA
usb: chipidea: udc: free pending TD at removal procedure
usb: chipidea: imx: Add usb_phy_shutdown at probe's error path
usb: chipidea: Fix memleak for ci->hw_bank.regmap when removal
usb: chipidea: udc: fix the oops after rmmod gadget
USB: fix PM config symbol in uhci-hcd, ehci-hcd, and xhci-hcd
USB: OHCI: accept very late isochronous URBs
USB: UHCI: accept very late isochronous URBs
USB: iMX21: accept very late isochronous URBs
usbcore: check usb device's state before sending a Set SEL control transfer
xhci: Fix race between ep halt and URB cancellation
usb: Fix xHCI host issues on remote wakeup.
xhci: Ensure a command structure points to the correct trb on the command ring
xhci: Fix oops happening after address device timeout
Linus Torvalds [Sun, 29 Sep 2013 20:47:00 +0000 (13:47 -0700)]
Merge tag 'tty-3.12-rc3' of git://git./linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some serial at tty driver fixes for 3.12-rc3
The serial driver fixes some kref leaks, documentation is moved to the
proper places, and the tty and n_tty fixes resolve some reported
regressions. There is still one outstanding tty regression fix that
isn't in here yet, as I want to test it out some more, it will be sent
for 3.12-rc4 if it checks out"
* tag 'tty-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: ar933x_uart: move devicetree binding documentation
tty: Fix SIGTTOU not sent with tcflush()
n_tty: Fix EOF push index when termios changes
serial: pch_uart: remove unnecessary tty_port_tty_get
serial: pch_uart: fix tty-kref leak in dma-rx path
serial: pch_uart: fix tty-kref leak in rx-error path
serial: tegra: fix tty-kref leak
Linus Torvalds [Sun, 29 Sep 2013 20:46:18 +0000 (13:46 -0700)]
Merge tag 'staging-3.12-rc3' of git://git./linux/kernel/git/gregkh/staging
Pull staging fixes from Greg KH:
"Here are some staging driver fixes, MAINTAINER updates, and a new
device id. All of these have been in the linux-next tree, and are
pretty simple patches"
* tag 'staging-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: r8188eu: Add new device ID
staging: imx-drm: Fix probe failure
staging: vt6656: [BUG] iwctl_siwencodeext return if device not open
staging: vt6656: [BUG] main_usb.c oops on device_close move flag earlier.
staging: vt6656: rxtx.c [BUG] s_vGetFreeContext dead lock on null apTD.
Staging: rtl8192u: r819xU_cmdpkt: checking NULL value after doing dev_alloc_skb
staging: usbip: Orphan usbip
staging: r8188eu: Add files for new drive: Cocci spatch "noderef"
staging: r8188eu: Cocci spatch "noderef"
staging: octeon-usb: Cocci spatch "noderef"
staging: r8188eu: Add files for new drive: Cocci spatch "noderef"
MAINTAINERS: staging: dgnc and dgap drivers: add maintainer
staging: lustre: Cocci spatch "noderef"
Linus Torvalds [Sun, 29 Sep 2013 20:45:23 +0000 (13:45 -0700)]
Merge tag 'driver-core-3.12-rc3' of git://git./linux/kernel/git/gregkh/driver-core
Pull driver core / sysfs fixes from Greg KH:
"Here are 2 fixes for 3.12-rc3. One fixes a sysfs problem with
mounting caused by 3.12-rc1, and the other is a bug reported by the
chromeos developers with the driver core.
Both have been in linux-next for a bit"
* tag 'driver-core-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core : Fix use after free of dev->parent in device_shutdown
sysfs: Allow mounting without CONFIG_NET
Linus Torvalds [Sun, 29 Sep 2013 20:44:48 +0000 (13:44 -0700)]
Merge tag 'char-misc-3.12-rc3' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some HyperV and MEI driver fixes for 3.12-rc3. They resolve
some issues that people have been reporting for them"
* tag 'char-misc-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
Drivers: hv: vmbus: Terminate vmbus version negotiation on timeout
Drivers: hv: util: Correctly support ws2008R2 and earlier
mei: cancel stall timers in mei_reset
mei: bus: stop wait for read during cl state transition
mei: make me client counters less error prone
Linus Torvalds [Sun, 29 Sep 2013 17:04:03 +0000 (10:04 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf revert from Ingo Molnar:
"This fixes the 'perf top' regression Markus Trippelsdorf reported"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "perf symbols: Demangle cloned functions"
Linus Torvalds [Sun, 29 Sep 2013 17:02:40 +0000 (10:02 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Nothing too major, radeon still has some dpm changes for off by
default.
Radeon, intel, msm:
- radeon: a few more dpm fixes (still off by default), uvd fixes
- i915: runtime warn backtrace and regression fix
- msm: iommu changes fallout"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (27 commits)
drm/msm: use drm_gem_dumb_destroy helper
drm/msm: deal with mach/iommu.h removal
drm/msm: Remove iommu include from mdp4_kms.c
drm/msm: Odd PTR_ERR usage
drm/i915: Fix up usage of SHRINK_STOP
drm/radeon: fix hdmi audio on DCE3.0/3.1 asics
drm/i915: preserve pipe A quirk in i9xx_set_pipeconf
drm/i915/tv: clear adjusted_mode.flags
drm/i915/dp: increase i2c-over-aux retry interval on AUX DEFER
drm/radeon/cik: fix overflow in vram fetch
drm/radeon: add missing hdmi callbacks for rv6xx
drm/i915: Use a temporary va_list for two-pass string handling
drm/radeon/uvd: lower msg&fb buffer requirements on UVD3
drm/radeon: disable tests/benchmarks if accel is disabled
drm/radeon: don't set default clocks for SI when DPM is disabled
drm/radeon/dpm/ci: filter clocks based on voltage/clk dep tables
drm/radeon/dpm/si: filter clocks based on voltage/clk dep tables
drm/radeon/dpm/ni: filter clocks based on voltage/clk dep tables
drm/radeon/dpm/btc: filter clocks based on voltage/clk dep tables
drm/radeon/dpm: fetch the max clk from voltage dep tables helper
...
Ingo Molnar [Sun, 29 Sep 2013 14:12:54 +0000 (16:12 +0200)]
Revert "perf symbols: Demangle cloned functions"
This reverts commit
de95ab53645a2f0015e0f68ee723f18dce2b8b51.
Markus Trippelsdorf reported that this commit broke 'perf top':
> I just see a gray screen with no text at all. Sometimes the
> following error messages are printed:
>
> *** Error in `perf': invalid fastbin entry (free): 0x00000000029b18c0
> ***
> *** Error in `perf': malloc(): memory corruption (fast): 0x0000000000ee0b10 ***
While this code is fixable, the commit itself fails on several levels:
- it should have been a separate helper function
- why the heck does it do strchr() twice
- it casts a const char * over into char *
- sloppy style
- it's not even a regression fix!
So lets revert it and re-try the patch in v3.13.
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dave Airlie [Sun, 29 Sep 2013 00:06:28 +0000 (10:06 +1000)]
Merge branch 'msm-fixes-3.12-rc2' of git://people.freedesktop.org/~robclark/linux into drm-fixes
A small fix + deal with fallout of iommu changes + use new
drm_gem_dumb_destroy helper.
* 'msm-fixes-3.12-rc2' of git://people.freedesktop.org/~robclark/linux:
drm/msm: use drm_gem_dumb_destroy helper
drm/msm: deal with mach/iommu.h removal
drm/msm: Remove iommu include from mdp4_kms.c
drm/msm: Odd PTR_ERR usage
Linus Torvalds [Sat, 28 Sep 2013 21:22:17 +0000 (14:22 -0700)]
Merge branches 'sched-urgent-for-linus', 'timers-urgent-for-linus' and 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler, timer and x86 fixes from Ingo Molnar:
- A context tracking ARM build and functional fix
- A handful of ARM clocksource/clockevent driver fixes
- An AMD microcode patch level sysfs reporting fixlet
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
arm: Fix build error with context tracking calls
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource: em_sti: Set cpu_possible_mask to fix SMP broadcast
clocksource: of: Respect device tree node status
clocksource: exynos_mct: Set IRQ affinity when the CPU goes online
arm: clocksource: mvebu: Use the main timer as clock source from DT
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/AMD: Fix patch level reporting for family 15h
Linus Torvalds [Sat, 28 Sep 2013 21:21:13 +0000 (14:21 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"A couple of tooling fixlets and a PMU detection printout fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86: Fix PMU detection printout when no PMU is detected
perf symbols: Demangle cloned functions
perf machine: Fix path unpopulated in machine__create_modules()
perf tools: Explicitly add libdl dependency
perf probe: Fix probing symbols with optimization suffix
perf trace: Add mmap2 handler
perf kmem: Make it work again on non NUMA machines
Linus Torvalds [Sat, 28 Sep 2013 20:52:05 +0000 (13:52 -0700)]
Merge tag 'xfs-for-linus-v3.12-rc3' of git://oss.sgi.com/xfs/xfs
Pull xfs bugfixes from Ben Myers:
- fix for directory node collapse regression
- fix for recovery over stale on disk structures
- fix for eofblocks ioctl
- fix asserts in xfs_inode_free
- lock the ail before removing an item from it
* tag 'xfs-for-linus-v3.12-rc3' of git://oss.sgi.com/xfs/xfs:
xfs: fix node forward in xfs_node_toosmall
xfs: log recovery lsn ordering needs uuid check
xfs: fix XFS_IOC_FREE_EOFBLOCKS definition
xfs: asserting lock not held during freeing not valid
xfs: lock the AIL before removing the buffer item
Linus Torvalds [Sat, 28 Sep 2013 20:44:09 +0000 (13:44 -0700)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Some driver bugfixes for the I2C subsystem"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: ismt: initialize DMA buffer
i2c: designware: 10-bit addressing mode enabling if I2C_DYNAMIC_TAR_UPDATE is set
i2c: mv64xxx: Do not use writel_relaxed()
i2c: mv64xxx: Fix some build warnings
i2c: s3c2410: fix clk_disable/clk_unprepare WARNings
Linus Torvalds [Sat, 28 Sep 2013 20:27:31 +0000 (13:27 -0700)]
Merge tag 'pm+acpi-3.12-rc3' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI and power management fixes from Rafael Wysocki:
"These fix one recent cpufreq regression, a few older bugs that may
harm users and a kerneldoc typo.
Specifics:
1) After the recent locking changes in the cpufreq core it is
possible to trigger BUG_ON(!policy) in lock_policy_rwsem_read() if
cpufreq_get() is called before registering a cpufreq driver. Fix
from Viresh Kumar.
2) If intel_pstate has been loaded already, it doesn't make sense to
do anything in acpi_cpufreq_init() and moreover doing something in
there in that case may be harmful, so make that function return
immediately if another cpufreq driver is already present. From
Yinghai Lu.
3) The ACPI IPMI driver sometimes attempts to acquire a mutex from
interrupt context, which can be avoided by replacing that mutex
with a spinlock. From Lv Zheng.
4) A NULL pointer may be dereferenced by the exynos5440 cpufreq
driver if a memory allocation made by it fails. Fix from Sachin
Kamat.
5) Hanjun Guo's commit fixes a typo in the kerneldoc comment
documenting acpi_bus_unregister_driver()"
* tag 'pm+acpi-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / scan: fix typo in comments of acpi_bus_unregister_driver()
cpufreq: exynos5440: Fix potential NULL pointer dereference
cpufreq: check cpufreq driver is valid and cpufreq isn't disabled in cpufreq_get()
acpi-cpufreq: skip loading acpi_cpufreq after intel_pstate
ACPI / IPMI: Fix atomic context requirement of ipmi_msg_handler()
Yinghai Lu [Sat, 28 Sep 2013 20:13:07 +0000 (13:13 -0700)]
PCI: Workaround missing pci_set_master in pci drivers
Ben Herrenschmidt found that commit
928bea964827 ("PCI: Delay enabling
bridges until they're needed") breaks PCI in some powerpc environments.
The reason is that the PCIe port driver will call pci_enable_device() on
the bridge, so the device is enabled, but skips pci_set_master because
pcie_port_auto and no acpi on powerpc.
Because of that, pci_enable_bridge() later on (called as a result of the
child device driver doing pci_enable_device) will see the bridge as
already enabled and will not call pci_set_master() on it.
Fixed by add checking in pci_enable_bridge, and call pci_set_master
if driver skip that.
That will make the code more robot and wade off problem for missing
pci_set_master in drivers.
Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 28 Sep 2013 19:36:19 +0000 (12:36 -0700)]
Merge branch 'lockref' of git://git./linux/kernel/git/s390/linux
Pull s390 lockref enablement from Heiko Carstens:
"Enabling the new lockless lockref variant on s390 would have been
trivial until Tony Luck added a cpu_relax() call into the
CMPXCHG_LOOP(), with commit
d472d9d98b46 ("lockref: Relax in cmpxchg
loop")
As already mentioned cpu_relax() is very expensive on s390 since it
yields() the current virtual cpu. So we are talking of several
thousand cycles. Considering this enabling the lockless lockref
variant would contradict the intention of the new semantics. And also
some quick measurements show performance regressions of 50% and more.
Simply removing the cpu_relax() call again seems also not very
desireable since Waiman Long reported that for some workloads the call
improved performance by 5%."
* 'lockref' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: enable ARCH_USE_CMPXCHG_LOCKREF
lockref: use arch_mutex_cpu_relax() in CMPXCHG_LOOP()
mutex: replace CONFIG_HAVE_ARCH_MUTEX_CPU_RELAX with simple ifdef
Jean Delvare [Fri, 27 Sep 2013 20:17:39 +0000 (13:17 -0700)]
kernel/params: fix handling of signed integer types
Commit
6072ddc8520b ("kernel: replace strict_strto*() with kstrto*()")
broke the handling of signed integer types, fix it.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Reported-by: Christian Kujau <lists@nerdbynature.de>
Tested-by: Christian Kujau <lists@nerdbynature.de>
Cc: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 28 Sep 2013 18:57:26 +0000 (11:57 -0700)]
Merge tag 'devicetree-fixes' of git://git./linux/kernel/git/robh/linux
Pull DeviceTree fixes from Rob Herring:
"Clean-up to fix some warnings for !OF builds and spelling fixes in
docs:
- Clean-up openrisc prom.h
- Fix warnings caused by of_irq.h ifdefs
- Spelling fix for Synopsys"
* tag 'devicetree-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dts: Fix misspelling of Synopsys
of: clean-up ifdefs in of_irq.h
openrisc: clean-up prom.h
Linus Torvalds [Sat, 28 Sep 2013 18:56:34 +0000 (11:56 -0700)]
Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM fixes from Russell King:
"Just a few relatively small ARM fixes found since the last merge
window, nothing too exciting"
* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
ARM: 7837/3: fix Thumb-2 bug in AES assembler code
ARM: only allow kernel mode neon with AEABI
ARM: 7839/1: entry: fix tracing of ARM-private syscalls
ARM: 7836/1: add __get_user_unaligned/__put_user_unaligned
James Ralston [Tue, 24 Sep 2013 23:47:55 +0000 (16:47 -0700)]
i2c: ismt: initialize DMA buffer
This patch adds code to initialize the DMA buffer to compensate for
possible hardware data corruption.
Signed-off-by: James Ralston <james.d.ralston@intel.com>
[wsa: changed to use 'sizeof']
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Rob Clark [Sat, 28 Sep 2013 14:13:04 +0000 (10:13 -0400)]
drm/msm: use drm_gem_dumb_destroy helper
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Sat, 28 Sep 2013 14:07:06 +0000 (10:07 -0400)]
drm/msm: deal with mach/iommu.h removal
We still need an API exported by msm iommu driver (but not visible in
any public header anymore). For now, just declare the prototype
ourselves, but when msm iommu driver provides a better option, use that
instead.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Ingo Molnar [Sat, 28 Sep 2013 13:48:48 +0000 (15:48 +0200)]
perf/x86: Fix PMU detection printout when no PMU is detected
Ran into this cryptic PMU bootup log recently:
[ 0.124047] Performance Events:
[ 0.125000] smpboot: ...
Turns out we print this if no PMU is detected. Fall back to
the right condition so that the following is printed:
[ 0.122381] Performance Events: no PMU driver, software events only.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/n/tip-u2fwaUffakjp0qkpRfqljgsn@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Joerg Roedel [Wed, 25 Sep 2013 14:49:40 +0000 (16:49 +0200)]
drm/msm: Remove iommu include from mdp4_kms.c
The include file has been removed and the file does not
need it anyway, so remove it. Fixes a compile error.
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Thomas Meyer [Mon, 16 Sep 2013 21:19:54 +0000 (23:19 +0200)]
drm/msm: Odd PTR_ERR usage
The variable priv->kms is not initialized yet.
Found by "scripts/coccinelle/tests/odd_ptr_err.cocci".
PTR_ERR should access the value just tested by IS_ERR.
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Heiko Carstens [Thu, 5 Sep 2013 11:26:17 +0000 (13:26 +0200)]
s390: enable ARCH_USE_CMPXCHG_LOCKREF
Enable ARCH_USE_CMPXCHG_LOCKREF since it shows performance improvements
with Linus' simple stat() test case of up to 50% on a 30 cpu system.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Heiko Carstens [Mon, 23 Sep 2013 10:59:56 +0000 (12:59 +0200)]
lockref: use arch_mutex_cpu_relax() in CMPXCHG_LOOP()
Make use of arch_mutex_cpu_relax() so architectures can override the
default cpu_relax() semantics.
This is especially useful for s390, where cpu_relax() means that we
yield() the current (virtual) cpu and therefore is very expensive,
and would contradict the whole purpose of the lockless cmpxchg loop.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Heiko Carstens [Sat, 28 Sep 2013 09:23:59 +0000 (11:23 +0200)]
mutex: replace CONFIG_HAVE_ARCH_MUTEX_CPU_RELAX with simple ifdef
Linus suggested to replace
#ifndef CONFIG_HAVE_ARCH_MUTEX_CPU_RELAX
#define arch_mutex_cpu_relax() cpu_relax()
#endif
with just a simple
#ifndef arch_mutex_cpu_relax
# define arch_mutex_cpu_relax() cpu_relax()
#endif
to get rid of CONFIG_HAVE_CPU_RELAX_SIMPLE. So architectures can
simply define arch_mutex_cpu_relax if they want an architecture
specific function instead of having to add a select statement in
their Kconfig in addition.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Ingo Molnar [Sat, 28 Sep 2013 06:50:09 +0000 (08:50 +0200)]
Merge branch 'context_tracking/fixes' of git://git./linux/kernel/git/frederic/linux-dynticks into sched/urgent
Pull context tracking ARM fix from Frederic Weisbecker.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dave Airlie [Sat, 28 Sep 2013 04:45:30 +0000 (14:45 +1000)]
Merge branch 'drm-fixes-3.12' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
More radeon fixes for 3.12. Kind of all over the place: UVD, DPM,
tiling, etc.
* 'drm-fixes-3.12' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: fix hdmi audio on DCE3.0/3.1 asics
drm/radeon/cik: fix overflow in vram fetch
drm/radeon: add missing hdmi callbacks for rv6xx
drm/radeon/uvd: lower msg&fb buffer requirements on UVD3
drm/radeon: disable tests/benchmarks if accel is disabled
drm/radeon: don't set default clocks for SI when DPM is disabled
drm/radeon/dpm/ci: filter clocks based on voltage/clk dep tables
drm/radeon/dpm/si: filter clocks based on voltage/clk dep tables
drm/radeon/dpm/ni: filter clocks based on voltage/clk dep tables
drm/radeon/dpm/btc: filter clocks based on voltage/clk dep tables
drm/radeon/dpm: fetch the max clk from voltage dep tables helper
drm/radeon: fix missed variable sized access
drm/radeon: Make r100_cp_ring_info() and radeon_ring_gfx() safe (v2)
drm/radeon/cik: Add tiling mode index for 1D tiled depth/stencil surfaces
drm/radeon/cik: Fix encoding of number of banks in tiling configuration info
drm/radeon/cik: Fix printing of client name on VM protection fault
drm/radeon: additional gcc fixes for radeon_atombios.c
drm/radeon: avoid UVD corruption on AGP cards using GPU gart
Sudeep Dutt [Fri, 27 Sep 2013 16:50:16 +0000 (09:50 -0700)]
misc: mic: depend on X86 for both host and card drivers.
This fixes build failures seen on certain non X86 architectures.
The card driver should correctly always depend on X86. The host
driver can potentially work on non X86 architectures although
it has never been built or validated in such configurations.
The host driver dependency on X86 can be removed at some point
in the future but this workaround is required for now.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Signed-off-by: Harshavardhan R Kharche <harshavardhan.r.kharche@intel.com>
Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sudeep Dutt [Fri, 27 Sep 2013 16:50:06 +0000 (09:50 -0700)]
misc: mic: fix a warning in the IOCTL header file.
The following warning from mic_ioctl.h is fixed via this patch:
found __[us]{8,16,32,64} type without #include <linux/types.h>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Signed-off-by: Harshavardhan R Kharche <harshavardhan.r.kharche@intel.com>
Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ashutosh Dixit [Fri, 27 Sep 2013 16:49:53 +0000 (09:49 -0700)]
misc: mic: cleanups for "--strict" checkpatch.
These changes were mostly authored by Joe Perches <joe@perches.com>
@ https://lkml.org/lkml/2013/9/5/602
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Signed-off-by: Harshavardhan R Kharche <harshavardhan.r.kharche@intel.com>
Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sudeep Dutt [Fri, 27 Sep 2013 16:49:42 +0000 (09:49 -0700)]
misc: mic: header file cleanups.
Dont use same name for header files in different folders.
These changes were suggested by Greg Kroah-Hartman during the
code review @ https://lkml.org/lkml/2013/9/6/18
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Signed-off-by: Harshavardhan R Kharche <harshavardhan.r.kharche@intel.com>
Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sudeep Dutt [Fri, 27 Sep 2013 16:49:31 +0000 (09:49 -0700)]
misc: mic: host driver sysfs cleanups.
+ Use DEVICE_ATTR_RO/RW instead of DEVICE_ATTR
+ Use ATTRIBUTE_GROUPS
These changes were suggested by Greg Kroah-Hartman during the
code review @ https://lkml.org/lkml/2013/9/6/13
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Signed-off-by: Harshavardhan R Kharche <harshavardhan.r.kharche@intel.com>
Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dave Airlie [Fri, 27 Sep 2013 22:46:44 +0000 (08:46 +1000)]
Merge tag 'drm-intel-fixes-2013-09-26' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes
Just a few fixes for regressions and other serious stuff.
Two fix state tracking mismatches, together with an additional patch that
I've submitted to stable (somehow forgotten to tag it) we should have them
fixed now (I hope).
* tag 'drm-intel-fixes-2013-09-26' of git://people.freedesktop.org/~danvet/drm-intel:
drm/i915: Fix up usage of SHRINK_STOP
drm/i915: preserve pipe A quirk in i9xx_set_pipeconf
drm/i915/tv: clear adjusted_mode.flags
drm/i915/dp: increase i2c-over-aux retry interval on AUX DEFER
drm/i915: Use a temporary va_list for two-pass string handling
Linus Torvalds [Fri, 27 Sep 2013 17:07:47 +0000 (10:07 -0700)]
Merge tag 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/linux-staging
Pull hwmon fix from Guenter Roeck:
"Fix potential crash condition in applesmc driver"
* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (applesmc) Check key count before proceeding
Linus Torvalds [Fri, 27 Sep 2013 16:33:01 +0000 (09:33 -0700)]
Merge tag 'sound-3.12' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Nothing too serious here: a couple of compress-offload core fixes,
Haswell HDMI audio fix, a fixup for new MacBook Airs and a few COEF
setups for ALC283 mic problems"
* tag 'sound-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Enable internal mic on a Thinkpad machine with ALC283
ALSA: hda - Fix Internal Mic boost can't control with ALC283
ALSA: hda - Add documentation for CS4208 fixups
ALSA: hda - Add fixup for MacBook Air 6,1 and 6,2 with CS4208 codec
ALSA : hda - not use assigned converters for all unused pins
ALSA: compress: Make sure we trigger STOP before closing the stream.
ALSA: compress: Fix compress device unregister.
Linus Torvalds [Fri, 27 Sep 2013 16:32:09 +0000 (09:32 -0700)]
Merge tag 'fbdev-fixes-3.12' of git://git./linux/kernel/git/tomba/linux
Pull fbdev fixes from Tomi Valkeinen:
"Small fbdev fixes for various fb drivers"
* tag 'fbdev-fixes-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
video: mxsfb: Add missing break
video: of: display_timing: correct display-timings node finding
neofb: fix error return code in neofb_probe()
s3fb: fix error return code in s3_pci_probe()
video: mmp: drop needless devm cleanup
OMAPDSS: Add missing dependency on backlight for DSI-CM panel drier
OMAPDSS: DISPC: set irq_safe for runtime PM
OMAPDSS: Return right error during connector probe
Linus Torvalds [Fri, 27 Sep 2013 16:31:09 +0000 (09:31 -0700)]
Merge branch 'for_linus' of git://git./linux/kernel/git/jack/linux-fs
Pull reiserfs and UDF fixes from Jan Kara:
"The contains fix of an UDF oops when mounting corrupted media and a
fix of a race in reiserfs leading to oops"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
reiserfs: fix race with flush_used_journal_lists and flush_journal_list
reiserfs: remove useless flush_old_journal_lists
udf: Fortify LVID loading
Eric W. Biederman [Mon, 23 Sep 2013 21:41:17 +0000 (14:41 -0700)]
sysfs: Allow mounting without CONFIG_NET
In kobj_ns_current_may_mount the default should be to allow the mount.
The test is only for a single kobj_ns_type at a time, and unless there
is a reason to prevent it the mounting sysfs should be allowed.
Subsystems that are not registered can't have are not involved so can't
have a reason to prevent mounting sysfs.
This is a bug-fix to commit
7dc5dbc879bd ("sysfs: Restrict mounting
sysfs") that came in via the userns tree during the 3.12 merge window.
Reported-and-tested-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Will Deacon [Thu, 26 Sep 2013 16:27:00 +0000 (17:27 +0100)]
lockref: allow relaxed cmpxchg64 variant for lockless updates
The 64-bit cmpxchg operation on the lockref is ordered by virtue of
hazarding between the cmpxchg operation and the reference count
manipulation. On weakly ordered memory architectures (such as ARM), it
can be of great benefit to omit the barrier instructions where they are
not needed.
This patch moves the lockless lockref code over to a cmpxchg64_relaxed
operation, which doesn't provide barrier semantics. If the operation
isn't defined, we simply #define it as the usual 64-bit cmpxchg macro.
Cc: Waiman Long <Waiman.Long@hp.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Chew, Chiau Ee [Thu, 26 Sep 2013 18:57:35 +0000 (02:57 +0800)]
i2c: designware: 10-bit addressing mode enabling if I2C_DYNAMIC_TAR_UPDATE is set
According to Designware I2C spec, if I2C_DYNAMIC_TAR_UPDATE is set to 1,
the 10-bit addressing mode is controlled by IC_10BITADDR_MASTER bit of
IC_TAR register instead of IC_CON register. The IC_10BITADDR_MASTER
in IC_CON register becomes read-only copy. Since I2C_DYNAMIC_TAR_UPDATE
value can't be detected from hardware register, so we will always set the
IC_10BITADDR_MASTER bit in both IC_CON and IC_TAR register whenever 10-bit
addresing mode is requested by user application.
Signed-off-by: Chew, Chiau Ee <chiau.ee.chew@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Thierry Reding [Wed, 18 Sep 2013 12:51:40 +0000 (14:51 +0200)]
i2c: mv64xxx: Do not use writel_relaxed()
The driver is used on PowerPC which don't provide writel_relaxed(). This
breaks the c2k and prpmc2800 default configurations. To fix the build,
turn the calls to writel_relaxed() into writel(). The impacts for ARM
should be minimal.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Thierry Reding [Wed, 18 Sep 2013 12:50:52 +0000 (14:50 +0200)]
i2c: mv64xxx: Fix some build warnings
Some functions and variables are only used if the configuration selects
HAVE_CLK. Protect them with a corresponding #ifdef CONFIG_HAVE_CLK block
to avoid compiler warnings.
Signed-off-by: Thierry Reding <treding@nvidia.com>
[wsa: added marker to #endif]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Kim Phillips [Tue, 17 Sep 2013 16:31:53 +0000 (11:31 -0500)]
i2c: s3c2410: fix clk_disable/clk_unprepare WARNings
commit
d16933b33914a6dff38a4ecbe8edce44a17898e8 "i2c: s3c2410: Move
location of clk_prepare_enable() call in probe function" refactored
clk_enable and clk_disable calls yet neglected to remove the
clk_disable_unprepare call in the module's remove().
It helps remove warnings on an arndale during unbind:
echo
12c90000.i2c > /sys/bus/platform/devices/
12c90000.i2c/driver/unbind
------------[ cut here ]------------
WARNING: CPU: 0 PID: 2548 at drivers/clk/clk.c:842 clk_disable+0x18/0x24()
Modules linked in:
CPU: 0 PID: 2548 Comm: bash Not tainted
3.11.0-next-20130916-00003-gf4bddbc #6
[<
c0014d48>] (unwind_backtrace+0x0/0xf8) from [<
c00117d0>] (show_stack+0x10/0x14)
[<
c00117d0>] (show_stack+0x10/0x14) from [<
c0361be8>] (dump_stack+0x6c/0xac)
[<
c0361be8>] (dump_stack+0x6c/0xac) from [<
c001d864>] (warn_slowpath_common+0x64/0x88)
[<
c001d864>] (warn_slowpath_common+0x64/0x88) from [<
c001d8a4>] (warn_slowpath_null+0x1c/0x24)
[<
c001d8a4>] (warn_slowpath_null+0x1c/0x24) from [<
c02c4a64>] (clk_disable+0x18/0x24)
[<
c02c4a64>] (clk_disable+0x18/0x24) from [<
c028d0b0>] (s3c24xx_i2c_remove+0x28/0x70)
[<
c028d0b0>] (s3c24xx_i2c_remove+0x28/0x70) from [<
c0217a10>] (platform_drv_remove+0x18/0x1c)
[<
c0217a10>] (platform_drv_remove+0x18/0x1c) from [<
c0216358>] (__device_release_driver+0x58/0xb4)
[<
c0216358>] (__device_release_driver+0x58/0xb4) from [<
c02163d0>] (device_release_driver+0x1c/0x28)
[<
c02163d0>] (device_release_driver+0x1c/0x28) from [<
c02153c0>] (unbind_store+0x58/0x90)
[<
c02153c0>] (unbind_store+0x58/0x90) from [<
c0214c90>] (drv_attr_store+0x20/0x2c)
[<
c0214c90>] (drv_attr_store+0x20/0x2c) from [<
c01032c0>] (sysfs_write_file+0x168/0x198)
[<
c01032c0>] (sysfs_write_file+0x168/0x198) from [<
c00ae1c0>] (vfs_write+0xb0/0x194)
[<
c00ae1c0>] (vfs_write+0xb0/0x194) from [<
c00ae594>] (SyS_write+0x3c/0x70)
[<
c00ae594>] (SyS_write+0x3c/0x70) from [<
c000e3e0>] (ret_fast_syscall+0x0/0x30)
---[ end trace
4c9f9403066f57a6 ]---
------------[ cut here ]------------
WARNING: CPU: 0 PID: 2548 at drivers/clk/clk.c:751 clk_unprepare+0x14/0x1c()
Modules linked in:
CPU: 0 PID: 2548 Comm: bash Tainted: G W
3.11.0-next-20130916-00003-gf4bddbc #6
[<
c0014d48>] (unwind_backtrace+0x0/0xf8) from [<
c00117d0>] (show_stack+0x10/0x14)
[<
c00117d0>] (show_stack+0x10/0x14) from [<
c0361be8>] (dump_stack+0x6c/0xac)
[<
c0361be8>] (dump_stack+0x6c/0xac) from [<
c001d864>] (warn_slowpath_common+0x64/0x88)
[<
c001d864>] (warn_slowpath_common+0x64/0x88) from [<
c001d8a4>] (warn_slowpath_null+0x1c/0x24)
[<
c001d8a4>] (warn_slowpath_null+0x1c/0x24) from [<
c02c5834>] (clk_unprepare+0x14/0x1c)
[<
c02c5834>] (clk_unprepare+0x14/0x1c) from [<
c028d0b8>] (s3c24xx_i2c_remove+0x30/0x70)
[<
c028d0b8>] (s3c24xx_i2c_remove+0x30/0x70) from [<
c0217a10>] (platform_drv_remove+0x18/0x1c)
[<
c0217a10>] (platform_drv_remove+0x18/0x1c) from [<
c0216358>] (__device_release_driver+0x58/0xb4)
[<
c0216358>] (__device_release_driver+0x58/0xb4) from [<
c02163d0>] (device_release_driver+0x1c/0x28)
[<
c02163d0>] (device_release_driver+0x1c/0x28) from [<
c02153c0>] (unbind_store+0x58/0x90)
[<
c02153c0>] (unbind_store+0x58/0x90) from [<
c0214c90>] (drv_attr_store+0x20/0x2c)
[<
c0214c90>] (drv_attr_store+0x20/0x2c) from [<
c01032c0>] (sysfs_write_file+0x168/0x198)
[<
c01032c0>] (sysfs_write_file+0x168/0x198) from [<
c00ae1c0>] (vfs_write+0xb0/0x194)
[<
c00ae1c0>] (vfs_write+0xb0/0x194) from [<
c00ae594>] (SyS_write+0x3c/0x70)
[<
c00ae594>] (SyS_write+0x3c/0x70) from [<
c000e3e0>] (ret_fast_syscall+0x0/0x30)
---[ end trace
4c9f9403066f57a7 ]---
Signed-off-by: Kim Phillips <kim.phillips@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Frederic Weisbecker [Mon, 9 Sep 2013 22:54:17 +0000 (00:54 +0200)]
arm: Fix build error with context tracking calls
ad65782fba50 (context_tracking: Optimize main APIs off case
with static key) converted context tracking main APIs to inline
function and left ARM asm callers behind.
This can be easily fixed by making ARM calling the post static
keys context tracking function. We just need to replicate the
static key checks there. We'll remove these later when ARM will
support the context tracking static keys.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Tested-by: Kevin Hilman <khilman@linaro.org>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Anil Kumar <anilk4.v@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Kevin Hilman <khilman@linaro.org>
Kailang Yang [Fri, 27 Sep 2013 11:10:25 +0000 (13:10 +0200)]
ALSA: hda - Enable internal mic on a Thinkpad machine with ALC283
More thorough testing showed that these verbs were necessary to
improve quality of the internal mic. Patch originally from Realtek.
BugLink: https://bugs.launchpad.net/bugs/1231931
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Kailang Yang [Fri, 27 Sep 2013 12:02:28 +0000 (14:02 +0200)]
ALSA: hda - Fix Internal Mic boost can't control with ALC283
ALC283 pin control for Line1 default control by hidden register.
Use line1 as internal Mic will not get sound when boost value up.
Set control by verb for hidden register will solve this issue.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 27 Sep 2013 08:19:31 +0000 (10:19 +0200)]
ALSA: hda - Add documentation for CS4208 fixups
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Ben Whitten [Fri, 27 Sep 2013 08:13:51 +0000 (10:13 +0200)]
ALSA: hda - Add fixup for MacBook Air 6,1 and 6,2 with CS4208 codec
This patch adds the default pin configuration and some init verbs for
setting COEFs, in addition to the correction of input pin AMP caps
for MacBook Air 6,1 and 6,2. With these changes, the headphone jack
detection starts working properly.
[trivial space fixes by tiwai]
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=60811
Signed-off-by: Ben Whitten <benwhitten@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Suravee Suthikulpanit [Thu, 30 Sep 2010 00:27:12 +0000 (19:27 -0500)]
x86/microcode/AMD: Fix patch level reporting for family 15h
On AMD family 14h, applying microcode patch on the a core (core0)
would also affect the other core (core1) in the same compute
unit. The driver would skip applying the patch on core1, but it
still need to update kernel structures to reflect the proper
patch level.
The current logic is not updating the struct
ucode_cpu_info.cpu_sig.rev of the skipped core. This causes the
/sys/devices/system/cpu/cpu1/microcode/version to report
incorrect patch level as shown below:
$ grep . cpu?/microcode/version
cpu0/microcode/version:0x600063d
cpu1/microcode/version:0x6000626
cpu2/microcode/version:0x600063d
cpu3/microcode/version:0x6000626
cpu4/microcode/version:0x600063d
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: <bp@alien8.de>
Cc: <jacob.w.shin@gmail.com>
Cc: <herrmann.der.user@googlemail.com>
Link: http://lkml.kernel.org/r/1285806432-1995-1-git-send-email-suravee.suthikulpanit@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Greg Kroah-Hartman [Fri, 27 Sep 2013 03:47:25 +0000 (20:47 -0700)]
Merge tag 'extcon-next-for-3.13' of git://git./linux/kernel/git/chanwoo/extcon into char-misc-next
Chanwoo writes:
Update extcon for 3.13
This patchset modify extcon core to remove unnecessary allocation sequence for
'dev' instance and change extcon_dev_register() interface. extcon-gpio use
gpiolib API to get debounce time and include small fix of extcon core/device
driver.
Detailed description for patchset:
1. Modify extcon core driver
- The extcon-gpio driver use gpio_set_debounce() API provided from gpiolib
if gpio driver for SoC support gpio_set_debounce() function and support 'gpio_
activ_low' filed to check whether gpio active state is 1(high) or 0(low).
- Change field type of 'dev' in structure extcon_dev and remove the sequence
of allocating memory of 'struct dev' on extcon_dev_register() function because
extcon device must need 'struct device.
- Change extcon_dev_register() prototype to simplify it and remove unnecessary
parameter as below:
2. Fix coding style and typo
- extcon core : Fix indentation coding style and remove unnecessary casting
- extcon-max8997 : Fix checkpatch warning
- extcon-max77693 : Fix checkpatch warning
- extcon-arizona : Fix typo of comment and modify minor issue
- extcon-palmas : Use dev_get_platdata()
3. Modify extcon-arizona driver
- Modify minor issue about micbias and comparision statement
Rafael J. Wysocki [Fri, 27 Sep 2013 00:45:36 +0000 (02:45 +0200)]
Merge branch 'pm-cpufreq-fixes'
* pm-cpufreq-fixes:
cpufreq: exynos5440: Fix potential NULL pointer dereference
cpufreq: check cpufreq driver is valid and cpufreq isn't disabled in cpufreq_get()
acpi-cpufreq: skip loading acpi_cpufreq after intel_pstate
Rafael J. Wysocki [Fri, 27 Sep 2013 00:45:10 +0000 (02:45 +0200)]
Merge branch 'acpi-fixes'
* acpi-fixes:
ACPI / scan: fix typo in comments of acpi_bus_unregister_driver()
ACPI / IPMI: Fix atomic context requirement of ipmi_msg_handler()
Chanwoo Choi [Fri, 27 Sep 2013 00:20:26 +0000 (09:20 +0900)]
extcon: Simplify extcon_dev_register() prototype by removing unnecessary parameter
This patch remove extcon_dev_register()'s second parameter which means
the pointer of parent device to simplify prototype of this function.
So, if extcon device has the parent device, it should set the pointer of
parent device to edev.dev.parent in extcon device driver instead of in
extcon_dev_register().
Cc: Graeme Gregory <gg@slimlogic.co.uk>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
Chanwoo Choi [Fri, 27 Sep 2013 00:19:40 +0000 (09:19 +0900)]
extcon: Change field type of 'dev' in extcon_dev structure
The extcon device must always need 'struct device' so this patch change
field type of 'dev' instead of allocating memory for 'struct device' on
extcon_dev_register() function.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Myungjoo Ham <cw00.choi@samsung.com>
Charles Keepax [Mon, 23 Sep 2013 13:33:59 +0000 (14:33 +0100)]
extcon: arizona: Don't require micbias to be shifted in pdata
Every other pdata field is specified unshifted the patch handles
shifting for the MICBIAS from the microphone detection polarity
configurations in the extcon driver rather than demanding it in
pdata to match other fields.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Charles Keepax [Mon, 23 Sep 2013 13:33:58 +0000 (14:33 +0100)]
extcon: arizona: Correct typo in headphone detect range transitions
We should move range when the measured value is greater than or equal to
the max value not when greater than.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Guenter Roeck [Wed, 11 Sep 2013 23:49:54 +0000 (08:49 +0900)]
extcon: gpio: Add support for active-low presence to detect pins
This patch add 'gpio_active_low' field to 'struct gpio_extcon_data'
to check whether gpio active state is 1(high) or 0(low).
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Jingoo Han [Wed, 11 Sep 2013 04:22:18 +0000 (13:22 +0900)]
extcon: use dev_get_platdata()
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly. This is a cosmetic change
to make the code simpler and enhance the readability.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Guenter Roeck [Wed, 11 Sep 2013 02:16:18 +0000 (19:16 -0700)]
extcon: gpio: Use gpio driver/chip debounce if supported
This patch use gpio_set_debounce() API provided from gpiolib if SoC or device
driver with gpio support gpio_set_debounce() function.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Guenter Roeck [Fri, 30 Aug 2013 04:29:33 +0000 (21:29 -0700)]
extcon: gpio: Do not unnecessarily initialize variables
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Jingoo Han [Mon, 9 Sep 2013 05:33:32 +0000 (14:33 +0900)]
extcon: Remove casting the return value which is a void pointer
Casting the return value which is a void pointer is redundant.
The conversion from void pointer to any other pointer type is
guaranteed by the C programming language.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Chanwoo Choi [Sat, 31 Aug 2013 04:16:49 +0000 (13:16 +0900)]
extcon: Fix indentation coding style to improve readability
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
Sachin Kamat [Mon, 5 Aug 2013 09:02:04 +0000 (14:32 +0530)]
extcon: max77693: Fix checkpatch warning
Fixes the following warning:
WARNING: space prohibited before semicolon
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Sachin Kamat [Mon, 5 Aug 2013 09:00:46 +0000 (14:30 +0530)]
extcon: arizona: Fix a typo in a comment
Fixes an incomplete comment introduced by commit
9c2ba270
("extcon: arizona: Simplify HPDET based identification").
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Charles Keepax [Wed, 7 Aug 2013 11:17:14 +0000 (12:17 +0100)]
extcon: arizona: Clear trig_sts bits on all paths
We want the trig_sts bits to be cleared in all cases where we consider
the jack detection interrupt to have been handled. Specifically, if a
duplicate detection event was suppressed these bits were not cleared
causing the CODEC to not enter a low power state. This patch clears the
bits on the duplicate detection code path.
Reported-by: Ryo Tsutsui <ryo.tsutsui@wolfsonmicro.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Sachin Kamat [Mon, 5 Aug 2013 09:02:03 +0000 (14:32 +0530)]
extcon: max8997: Fix checkpatch warning
Fixes the following warning:
WARNING: space prohibited before semicolon
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Larry Finger [Thu, 26 Sep 2013 18:07:31 +0000 (13:07 -0500)]
staging: r8188eu: Add new device ID
The DLink DWA-125 Rev D1 also uses this driver.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Reported-by: Sergey Kostanbaev <sergey.kostanbaev@gmail.com>
Tested-by: Sergey Kostanbaev <sergey.kostanbaev@gmail.com>
Cc: Sergey Kostanbaev <sergey.kostanbaev@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Mon, 16 Sep 2013 21:58:36 +0000 (00:58 +0300)]
hv: vmbus: fix vmbus_recvpacket_raw() return code
Don't return success if the buffer has not been initialized.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Cohen [Thu, 26 Sep 2013 20:01:44 +0000 (13:01 -0700)]
usb: dwc3: add support for Merrifield
Add PCI id for Intel Merrifield
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shengzhou Liu [Mon, 2 Sep 2013 05:25:52 +0000 (13:25 +0800)]
USB: fsl/ehci: fix failure of checking PHY_CLK_VALID during reinitialization
In case of usb phy reinitialization:
e.g. insmod usb-module(usb works well) -> rmmod usb-module -> insmod usb-module
It found the PHY_CLK_VALID bit didn't work if it's not with the power-on reset.
So we just check PHY_CLK_VALID bit during the stage with POR, this can be met
by the tricky of checking FSL_SOC_USB_PRICTRL register.
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Fri, 20 Sep 2013 16:14:21 +0000 (17:14 +0100)]
USB: Fix breakage in ffs_fs_mount()
There's a bunch of failure exits in ffs_fs_mount() with
seriously broken recovery logics. Most of that appears to stem
from misunderstanding of the ->kill_sb() semantics; unlike
->put_super() it is called for *all* superblocks of given type,
no matter how (in)complete the setup had been. ->put_super()
is called only if ->s_root is not NULL; any failure prior to
setting ->s_root will have the call of ->put_super() skipped.
->kill_sb(), OTOH, awaits every superblock that has come from
sget().
Current behaviour of ffs_fs_mount():
We have struct ffs_sb_fill_data data on stack there. We do
ffs_dev = functionfs_acquire_dev_callback(dev_name);
and store that in data.private_data. Then we call mount_nodev(),
passing it ffs_sb_fill() as a callback. That will either fail
outright, or manage to call ffs_sb_fill(). There we allocate an
instance of struct ffs_data, slap the value of ffs_dev (picked
from data.private_data) into ffs->private_data and overwrite
data.private_data by storing ffs into an overlapping member
(data.ffs_data). Then we store ffs into sb->s_fs_info and attempt
to set the rest of the things up (root inode, root dentry, then
create /ep0 there). Any of those might fail. Should that
happen, we get ffs_fs_kill_sb() called before mount_nodev()
returns. If mount_nodev() fails for any reason whatsoever,
we proceed to
functionfs_release_dev_callback(data.ffs_data);
That's broken in a lot of ways. Suppose the thing has failed in
allocation of e.g. root inode or dentry. We have
functionfs_release_dev_callback(ffs);
ffs_data_put(ffs);
done by ffs_fs_kill_sb() (ffs accessed via sb->s_fs_info), followed by
functionfs_release_dev_callback(ffs);
from ffs_fs_mount() (via data.ffs_data). Note that the second
functionfs_release_dev_callback() has every chance to be done to freed memory.
Suppose we fail *before* root inode allocation. What happens then?
ffs_fs_kill_sb() doesn't do anything to ffs (it's either not called at all,
or it doesn't have a pointer to ffs stored in sb->s_fs_info). And
functionfs_release_dev_callback(data.ffs_data);
is called by ffs_fs_mount(), but here we are in nasal daemon country - we
are reading from a member of union we'd never stored into. In practice,
we'll get what we used to store into the overlapping field, i.e. ffs_dev.
And then we get screwed, since we treat it (struct gfs_ffs_obj * in
disguise, returned by functionfs_acquire_dev_callback()) as struct
ffs_data *, pick what would've been ffs_data ->private_data from it
(*well* past the actual end of the struct gfs_ffs_obj - struct ffs_data
is much bigger) and poke in whatever it points to.
FWIW, there's a minor leak on top of all that in case if ffs_sb_fill()
fails on kstrdup() - ffs is obviously forgotten.
The thing is, there is no point in playing all those games with union.
Just allocate and initialize ffs_data *before* calling mount_nodev() and
pass a pointer to it via data.ffs_data. And once it's stored in
sb->s_fs_info, clear data.ffs_data, so that ffs_fs_mount() knows that
it doesn't need to kill the sucker manually - from that point on
we'll have it done by ->kill_sb().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: stable <stable@vger.kernel.org> # 3.3+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benson Leung [Wed, 25 Sep 2013 03:05:11 +0000 (20:05 -0700)]
driver core : Fix use after free of dev->parent in device_shutdown
The put_device(dev) at the bottom of the loop of device_shutdown
may result in the dev being cleaned up. In device_create_release,
the dev is kfreed.
However, device_shutdown attempts to use the dev pointer again after
put_device by referring to dev->parent.
Copy the parent pointer instead to avoid this condition.
This bug was found on Chromium OS's chromeos-3.8, which is based on v3.8.11.
See bug report : https://code.google.com/p/chromium/issues/detail?id=297842
This can easily be reproduced when shutting down with
hidraw devices that report battery condition.
Two examples are the HP Bluetooth Mouse X4000b and the Apple Magic Mouse.
For example, with the magic mouse :
The dev in question is "hidraw0"
dev->parent is "magicmouse"
In the course of the shutdown for this device, the input event cleanup calls
a put on hidraw0, decrementing its reference count.
When we finally get to put_device(dev) in device_shutdown, kobject_cleanup
is called and device_create_release does kfree(dev).
dev->parent is no longer valid, and we may crash in
put_device(dev->parent).
This change should be applied on any kernel with this change :
d1c6c030fcec6f860d9bb6c632a3ebe62e28440b
Cc: stable@vger.kernel.org
Signed-off-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric W. Biederman [Mon, 23 Sep 2013 21:41:17 +0000 (14:41 -0700)]
sysfs: Allow mounting without CONFIG_NET
In kobj_ns_current_may_mount the default should be to allow the
mount. The test is only for a single kobj_ns_type at a time, and unless
there is a reason to prevent it the mounting sysfs should be allowed.
Subsystems that are not registered can't have are not involved so can't
have a reason to prevent mounting sysfs.
This is a bug-fix to:
commit
7dc5dbc879bd0779924b5132a48b731a0bc04a1e
Author: Eric W. Biederman <ebiederm@xmission.com>
Date: Mon Mar 25 20:07:01 2013 -0700
sysfs: Restrict mounting sysfs
Don't allow mounting sysfs unless the caller has CAP_SYS_ADMIN rights
over the net namespace. The principle here is if you create or have
capabilities over it you can mount it, otherwise you get to live with
what other people have mounted.
Instead of testing this with a straight forward ns_capable call,
perform this check the long and torturous way with kobject helpers,
this keeps direct knowledge of namespaces out of sysfs, and preserves
the existing sysfs abstractions.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
That came in via the userns tree during the 3.12 merge window.
Reported-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
K. Y. Srinivasan [Wed, 4 Sep 2013 22:41:58 +0000 (15:41 -0700)]
Drivers: hv: vmbus: Terminate vmbus version negotiation on timeout
commit
666b9adc801ef012612c4e43e0f44b2cdc1979cf terminated vmbus
version negotiation incorrectly. We need to terminate the version
negotiation only if the current negotiation were to timeout.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Cc: Olaf Hering <ohering@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
K. Y. Srinivasan [Fri, 6 Sep 2013 18:49:56 +0000 (11:49 -0700)]
Drivers: hv: util: Correctly support ws2008R2 and earlier
The current code does not correctly negotiate the version numbers for the util
driver when hosted on earlier hosts. The version numbers presented by this
driver were not compatible with the version numbers supported by Windows Server
2008. Fix this problem.
I would like to thank Olaf Hering (ohering@suse.com) for identifying the problem.
Reported-by: Olaf Hering <ohering@suse.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Usyskin [Mon, 2 Sep 2013 10:29:47 +0000 (13:29 +0300)]
mei: cancel stall timers in mei_reset
Unset init_clients_timer and amthif_stall_timers
in mei_reset in order to cancel timer ticking and hence
avoid recursive reset calls.
Cc: <stable@vger.kernel.org> # 3.9+
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tomas Winkler [Mon, 2 Sep 2013 10:29:46 +0000 (13:29 +0300)]
mei: bus: stop wait for read during cl state transition
Bus layer omitted check for client state transition while waiting
for read completion
The client state transition may occur for example as result
of firmware initiated reset
Add mei_cl_is_transitioning wrapper to reduce the code
repetition.:
Cc: <stable@vger.kernel.org> # 3.9+
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tomas Winkler [Mon, 2 Sep 2013 10:29:45 +0000 (13:29 +0300)]
mei: make me client counters less error prone
1. u8 counters are prone to hard to detect overflow:
make them unsigned long to match bit_ functions argument type
2. don't check me_clients_num for negativity, it is unsigned.
3. init all the me client counters from one place
Cc: <stable@vger.kernel.org> # 3.9+
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wei Yongjun [Tue, 24 Sep 2013 02:40:57 +0000 (10:40 +0800)]
mmc: cb710: drop free_irq for devm_request_irq allocated irq
irq allocated with devm_request_irq should not be freed using
free_irq, because doing so causes a dangling pointer, and a
subsequent double free.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Caz Yokoyama [Thu, 5 Sep 2013 23:42:39 +0000 (16:42 -0700)]
Sample Implementation of Intel MIC User Space Daemon.
This patch introduces a sample user space daemon which
implements the virtio device backends on the host. The daemon
creates/removes/configures virtio device backends by communicating with
the Intel MIC Host Driver. The virtio devices currently supported are
virtio net, virtio console and virtio block. Virtio net supports TSO/GSO.
The daemon also monitors card shutdown status and takes appropriate actions
like killing the virtio backends and resetting the card upon card shutdown
and crashes.
Co-author: Ashutosh Dixit <ashutosh.dixit@intel.com>
Co-author: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Caz Yokoyama <Caz.Yokoyama@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Signed-off-by: Harshavardhan R Kharche <harshavardhan.r.kharche@intel.com>
Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com>
Acked-by: Yaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ashutosh Dixit [Thu, 5 Sep 2013 23:42:28 +0000 (16:42 -0700)]
Intel MIC Card Driver Changes for Virtio Devices.
This patch introduces the card "Virtio over PCIe" interface for
Intel MIC. It allows virtio drivers on the card to communicate with their
user space backends on the host via a device page. Ring 3 apps on the host
can add, remove and configure virtio devices. A thin MIC specific
virtio_config_ops is implemented which is borrowed heavily from previous
similar implementations in lguest and s390 @
drivers/lguest/lguest_device.c
drivers/s390/kvm/kvm_virtio.c
Co-author: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Caz Yokoyama <Caz.Yokoyama@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Signed-off-by: Harshavardhan R Kharche <harshavardhan.r.kharche@intel.com>
Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com>
Acked-by: Yaozu (Eddie) Dong <eddie.dong@intel.com>
Reviewed-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ashutosh Dixit [Thu, 5 Sep 2013 23:42:18 +0000 (16:42 -0700)]
Intel MIC Host Driver Changes for Virtio Devices.
This patch introduces the host "Virtio over PCIe" interface for
Intel MIC. It allows creating user space backends on the host and instantiating
virtio devices for them on the Intel MIC card. It uses the existing VRINGH
infrastructure in the kernel to access virtio rings from the host. A character
device per MIC is exposed with IOCTL, mmap and poll callbacks. This allows the
user space backend to:
(a) add/remove a virtio device via a device page.
(b) map (R/O) virtio rings and device page to user space.
(c) poll for availability of data.
(d) copy a descriptor or entire descriptor chain to/from the card.
(e) modify virtio configuration.
(f) handle virtio device reset.
The buffers are copied over using CPU copies for this initial patch
and host initiated MIC DMA support is planned for future patches.
The avail and desc virtio rings are in host memory and the used ring
is in card memory to maximize writes across PCIe for performance.
Co-author: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Caz Yokoyama <Caz.Yokoyama@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Signed-off-by: Harshavardhan R Kharche <harshavardhan.r.kharche@intel.com>
Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com>
Acked-by: Yaozu (Eddie) Dong <eddie.dong@intel.com>
Reviewed-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sudeep Dutt [Thu, 5 Sep 2013 23:42:06 +0000 (16:42 -0700)]
Intel MIC Card Driver for X100 family.
This patch does the following:
a) Initializes the Intel MIC X100 platform device and driver.
b) Sets up support to handle shutdown requests from the host.
c) Maps the device page after obtaining the device page address
from the scratchpad registers updated by the host.
d) Informs the host upon a card crash by registering a panic notifier.
e) Informs the host upon a poweroff/halt event.
Co-author: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Caz Yokoyama <Caz.Yokoyama@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Signed-off-by: Harshavardhan R Kharche <harshavardhan.r.kharche@intel.com>
Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com>
Acked-by: Yaozu (Eddie) Dong <eddie.dong@intel.com>
Reviewed-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sudeep Dutt [Thu, 5 Sep 2013 23:41:55 +0000 (16:41 -0700)]
Intel MIC Host Driver, card OS state management.
This patch enables the following features:
a) Boots and shuts down the card via sysfs entries.
b) Allocates and maps a device page for communication with the
card driver and updates the device page address via scratchpad
registers.
c) Provides sysfs entries for shutdown status, kernel command line,
ramdisk and log buffer information.
Co-author: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Caz Yokoyama <Caz.Yokoyama@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Harshavardhan R Kharche <harshavardhan.r.kharche@intel.com>
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com>
Acked-by: Yaozu (Eddie) Dong <eddie.dong@intel.com>
Reviewed-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dasaratharaman Chandramouli [Thu, 5 Sep 2013 23:41:41 +0000 (16:41 -0700)]
Intel MIC Host Driver Interrupt/SMPT support.
This patch enables the following features:
a) MSIx, MSI and legacy interrupt support.
b) System Memory Page Table(SMPT) support. SMPT enables system memory
access from the card. On X100 devices the host can program 32 SMPT
registers each capable of accessing 16GB of system memory
address space from X100 devices. The registers can thereby be used
to access a cumulative 512GB of system memory address space from
X100 devices at any point in time.
Co-author: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Caz Yokoyama <Caz.Yokoyama@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Signed-off-by: Harshavardhan R Kharche <harshavardhan.r.kharche@intel.com>
Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com>
Acked-by: Yaozu (Eddie) Dong <eddie.dong@intel.com>
Reviewed-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sudeep Dutt [Thu, 5 Sep 2013 23:41:31 +0000 (16:41 -0700)]
Intel MIC Host Driver for X100 family.
This patch enables the following:
a) Initializes the Intel MIC X100 PCIe devices.
b) Provides sysfs entries for family and stepping information.
Co-author: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Caz Yokoyama <Caz.Yokoyama@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Harshavardhan R Kharche <harshavardhan.r.kharche@intel.com>
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com>
Acked-by: Yaozu (Eddie) Dong <eddie.dong@intel.com>
Reviewed-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wei Yongjun [Fri, 6 Sep 2013 06:39:28 +0000 (14:39 +0800)]
VMCI: fix to pass correct device identity to free_irq()
free_irq() expects the same device identity that was passed to
corresponding request_irq(), otherwise the IRQ is not freed.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Dmitry Torokhov <dtor@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>