migration: Create migrate_max_cpu_throttle()

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>

migration: Create migrate_checkpoint_delay()

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>

migration: Create migrate_throttle_trigger_threshold()

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>

migration: Move migrate_use_block_incremental() to option.c

To be consistent with every other parameter, rename to
migrate_block_incremental().

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>

migration: Use migrate_max_postcopy_bandwidth()

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>

migration: Move parameters functions to option.c

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>

migration: Move migrate_cap_set() to options.c

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>

migration: Move qmp_migrate_set_capabilities() to options.c

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>

migration: Move qmp_query_migrate_capabilities() to options.c

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>

migration: Move migrate_caps_check() to options.c

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>

migration: Create migrate_rdma_pin_all() function

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
---

Fixed missing space after comma (fabiano)

migration: Move migrate_use_return() to options.c

Once that we are there, we rename the function to migrate_return_path()
to be consistent with all other capabilities.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>

migration: Move migrate_use_block() to options.c

Once that we are there, we rename the function to migrate_block()
to be consistent with all other capabilities.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>

migration: Move migrate_use_xbzrle() to options.c

Once that we are there, we rename the function to migrate_xbzrle()
to be consistent with all other capabilities.
We change the type to return bool also for consistency.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>

migration: Move migrate_use_zero_copy_send() to options.c

Once that we are there, we rename the function to
migrate_zero_copy_send() to be consistent with all other capabilities.

We can remove the CONFIG_LINUX guard.  We already check that we can't
setup this capability in migrate_caps_check().

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>

migration: Move migrate_use_multifd() to options.c

Once that we are there, we rename the function to migrate_multifd()
to be consistent with all other capabilities.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>

migration: Move migrate_use_events() to options.c

Once that we are there, we rename the function to migrate_events()
to be consistent with all other capabilities.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>

migration: Move migrate_use_compression() to options.c

Once that we are there, we rename the function to migrate_compress()
to be consistent with all other capabilities.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>

migration: Move migrate_colo_enabled() to options.c

Once that we are there, we rename the function to migrate_colo() to be
consistent with all other capabilities.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>

migration: Create options.c

We move there all capabilities helpers from migration.c.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---

Following David advise:
- looked through the history, capabilities are newer than 2012, so we
  can remove that bit of the header.
- This part is posterior to Anthony.
  Original Author is Orit. Once there,
  I put myself.  Peter Xu also did quite a bit of work here.
  Anyone else wants/needs to be there?  I didn't search too hard
  because nobody asked before to be added.

What do you think?

migration: Create migrate_cap_set()

And remove the convoluted use of qmp_migrate_set_capabilities() to
enable disable MIGRATION_CAPABILITY_BLOCK.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>

spice: move client_migrate_info command to ui/

It has nothing to do with migration, except for the "migrate" in the
name of the command.  Move it with the rest of the ui commands.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>

migration: move migration_global_dump() to migration-hmp-cmds.c

It is only used there, so we can make it static.
Once there, remove spice.h that it is not used.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---

fix David Edmonson ui/qemu-spice.h unintended removal

migration: Minor control flow simplification

No need to declare a temporary variable.

Suggested-by: Juan Quintela <quintela@redhat.com>
Fixes: 1df36e8c6289 ("migration: Handle block device inactivation failures better")
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

Merge tag 'migration-20230420-pull-request' of https://gitlab.com/juan.quintela/qemu into staging

Migration Pull request (take 2)

Remove the two atomic patches that broke mips32.

Please, apply.

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEGJn/jt6/WMzuA0uC9IfvGFhy1yMFAmRGYTkACgkQ9IfvGFhy
# 1yMD5RAApL8bJTMpmkZ8afxG124/CID7fvg/WMp3vOTG/6923XZHfosUwqrCCvzN
# 8qfSfOl4P5Gtv1dOU+ZBcgoFS3tj00Ud2YhcZiSVUy5LZPJNJEfv4YzIErDTJq3I
# wcv/CgHvK1CKJ5DZ1g9hqnRvw9qYiodDEHS7UxvhGzckFExHps2oWt9nDuEZefKV
# XptOX7YDFYmWE87fp8+rQMYGZEN/6Cc7p4HmSt9I11CgLbeaqTpmKuwTv89PU9qV
# 7/X9kfoHNsKsVKw5WosEdRvEqhVQbvcCCxq+TGpeQz6d5U2mY7RVxQSNJxXNdD3P
# uz7uannx+UhESgzf5GnwOMIcxWD6UMAcDt349IAWFbq5d1QGaXJ9fVVHVJDV1Irl
# XHqxkugNMxRVZ8hQy5gSE6UTpeIjkIpSoZGnGS7E/iLMZHZBgv7s5VK21mYxn/QF
# F9g3Ewo2lF+kpQ/ZEnQ9mFyCYtqOHOAOLAUa7/6WdGnUMuqQ47Fh+jbb+KdEyCLg
# l7yXk2gXAb8SN6957Tlvo9okOB4NzhDPDXgvewAG/1yW4zL9hA+YCMvEvy90N8Be
# rRKO7H9YlsW4wKjA//i2YNAbtaZN5+zeAS39m0exYmXA54AMufjWq/a7Ya/ix5Jo
# 452LEz5hA4ckXXtP715pKQjqafxWXbHSS1qw9LBfMYr5TEEWC6c=
# =JTxg
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 24 Apr 2023 12:00:09 PM BST
# gpg:                using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [undefined]
# gpg:                 aka "Juan Quintela <quintela@trasno.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03  4B82 F487 EF18 5872 D723

* tag 'migration-20230420-pull-request' of https://gitlab.com/juan.quintela/qemu:
  migration: Pass migrate_caps_check() the old and new caps
  migration: rename enabled_capabilities to capabilities
  migration/postcopy: Detect file system on dest host
  vl.c: Create late backends before migration object
  util/mmap-alloc: qemu_fd_getfs()
  migration: Handle block device inactivation failures better
  migration: Rename normal to normal_pages
  migration: Rename duplicate to zero_pages
  migration: Make postcopy_requests atomic
  migration: Make dirty_sync_count atomic
  migration: Make downtime_bytes atomic
  migration: Make precopy_bytes atomic
  migration: Make dirty_sync_missed_zero_copy atomic
  migration: Make multifd_bytes atomic
  migration: Update atomic stats out of the mutex
  migration: Merge ram_counters and ram_atomic_counters
  migration: remove extra whitespace character for code style

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

migration: Pass migrate_caps_check() the old and new caps

We used to pass the old capabilities array and the new
capabilities as a list.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>

migration: rename enabled_capabilities to capabilities

It is clear from the context what that means, and such a long name
with the extra long names of the capabilities make very difficilut to
stay inside the 80 columns limit.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>

migration/postcopy: Detect file system on dest host

Postcopy requires the memory support userfaultfd to work.  Right now we
check it but it's a bit too late (when switching to postcopy migration).

Do that early right at enabling of postcopy.

Note that this is still only a best effort because ramblocks can be
dynamically created.  We can add check in hostmem creations and fail if
postcopy enabled, but maybe that's too aggressive.

Still, we have chance to fail the most obvious where we know there's an
existing unsupported ramblock.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

vl.c: Create late backends before migration object

The migration object may want to check against different types of memory
when initialized.  Delay the creation to be after late backends.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

util/mmap-alloc: qemu_fd_getfs()

This new helper fetches file system type for a fd.  Only Linux is
implemented so far.  Currently only tmpfs and hugetlbfs are defined,
but it can grow as needed.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: Handle block device inactivation failures better

Consider what happens when performing a migration between two host
machines connected to an NFS server serving multiple block devices to
the guest, when the NFS server becomes unavailable.  The migration
attempts to inactivate all block devices on the source (a necessary
step before the destination can take over); but if the NFS server is
non-responsive, the attempt to inactivate can itself fail.  When that
happens, the destination fails to get the migrated guest (good,
because the source wasn't able to flush everything properly):

  (qemu) qemu-kvm: load of migration failed: Input/output error

at which point, our only hope for the guest is for the source to take
back control.  With the current code base, the host outputs a message, but then appears to resume:

  (qemu) qemu-kvm: qemu_savevm_state_complete_precopy_non_iterable: bdrv_inactivate_all() failed (-1)

  (src qemu)info status
   VM status: running

but a second migration attempt now asserts:

  (src qemu) qemu-kvm: ../block.c:6738: int bdrv_inactivate_recurse(BlockDriverState *): Assertion `!(bs->open_flags & BDRV_O_INACTIVE)' failed.

Whether the guest is recoverable on the source after the first failure
is debatable, but what we do not want is to have qemu itself fail due
to an assertion.  It looks like the problem is as follows:

In migration.c:migration_completion(), the source sets 'inactivate' to
true (since COLO is not enabled), then tries
savevm.c:qemu_savevm_state_complete_precopy() with a request to
inactivate block devices.  In turn, this calls
block.c:bdrv_inactivate_all(), which fails when flushing runs up
against the non-responsive NFS server.  With savevm failing, we are
now left in a state where some, but not all, of the block devices have
been inactivated; but migration_completion() then jumps to 'fail'
rather than 'fail_invalidate' and skips an attempt to reclaim those
those disks by calling bdrv_activate_all().  Even if we do attempt to
reclaim disks, we aren't taking note of failure there, either.

Thus, we have reached a state where the migration engine has forgotten
all state about whether a block device is inactive, because we did not
set s->block_inactive in enough places; so migration allows the source
to reach vm_start() and resume execution, violating the block layer
invariant that the guest CPUs should not be restarted while a device
is inactive.  Note that the code in migration.c:migrate_fd_cancel()
will also try to reactivate all block devices if s->block_inactive was
set, but because we failed to set that flag after the first failure,
the source assumes it has reclaimed all devices, even though it still
has remaining inactivated devices and does not try again.  Normally,
qmp_cont() will also try to reactivate all disks (or correctly fail if
the disks are not reclaimable because NFS is not yet back up), but the
auto-resumption of the source after a migration failure does not go
through qmp_cont().  And because we have left the block layer in an
inconsistent state with devices still inactivated, the later migration
attempt is hitting the assertion failure.

Since it is important to not resume the source with inactive disks,
this patch marks s->block_inactive before attempting inactivation,
rather than after succeeding, in order to prevent any vm_start() until
it has successfully reactivated all devices.

See also https://bugzilla.redhat.com/show_bug.cgi?id=2058982

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Lukas Straub <lukasstraub2@web.de>
Tested-by: Lukas Straub <lukasstraub2@web.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: Rename normal to normal_pages

Rest of counters that refer to pages has a _pages suffix.
And historically, this showed the number of full pages transferred.
The name "normal" refered to the fact that they were sent without any
optimization (compression, xbzrle, zero_page, ...).

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>

migration: Rename duplicate to zero_pages

Rest of counters that refer to pages has a _pages suffix.
And historically, this showed the number of pages composed of the same
character, here comes the name "duplicated".  But since years ago, it
refers to the number of zero_pages.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>

migration: Make postcopy_requests atomic

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>

migration: Make dirty_sync_count atomic

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>

migration: Make downtime_bytes atomic

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>

migration: Make precopy_bytes atomic

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>

migration: Make dirty_sync_missed_zero_copy atomic

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>

migration: Make multifd_bytes atomic

In the spirit of:

commit 394d323bc3451e4d07f13341cb8817fac8dfbadd
Author: Peter Xu <peterx@redhat.com>
Date:   Tue Oct 11 17:55:51 2022 -0400

    migration: Use atomic ops properly for page accountings

Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: Update atomic stats out of the mutex

Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: Merge ram_counters and ram_atomic_counters

Using MgrationStats as type for ram_counters mean that we didn't have
to re-declare each value in another struct. The need of atomic
counters have make us to create MigrationAtomicStats for this atomic
counters.

Create RAMStats type which is a merge of MigrationStats and
MigrationAtomicStats removing unused members.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
---

Fix typos found by David Edmondson

migration: remove extra whitespace character for code style

Fix code style.

Signed-off-by: 李皆俊 <a_lijiejun@163.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

Merge tag 'pull-tcg-20230423' of https://gitlab.com/rth7680/qemu into staging

tcg cleanups:
  - Remove tcg_abort()
  - Split out extensions as known backend interfaces
  - Put the separate extensions together as tcg_out_movext
  - Introduce tcg_out_xchg as a backend interface
  - Clear TCGLabelQemuLdst on allocation
  - Avoid redundant extensions for riscv

# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmRE69sdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV/6jQf6Al9cgeJ6guVMpoRS
# +sXaTs5U2yaqRvz5gGn2ANFuFgD2QanbWHjS5guTnhbsvq3icyOCpIXIPg/Z04LB
# fTgAUCF5ut8U8C12HyGq/p4BFoTTWnCGPwY+PB9pMb5LiEcmaSUUz+fSA8xMX1b6
# EylI8YNd74A9j5PBNbGIXooj8llM71p9YztwQ9V7sPH3ZON4qbPRDgrJsb5TngMa
# daTpGoW+A9UyG7z0Ie6UuiOyYAzeQqm64WmMlc7UYeb9lL+yxvCq4+MXH2V/SKqg
# GLOF95DCdqj1EeZCOt0aN1ybZPcYFFkmpXrD1iLu0Mhy7Qo/vghX/eFoFnLleD+Y
# yM+LTg==
# =d2hZ
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 23 Apr 2023 09:27:07 AM BST
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]

* tag 'pull-tcg-20230423' of https://gitlab.com/rth7680/qemu:
  tcg/riscv: Conditionalize tcg_out_exts_i32_i64
  tcg: Clear TCGLabelQemuLdst on allocation
  tcg: Introduce tcg_out_xchg
  tcg: Introduce tcg_out_movext
  tcg: Split out tcg_out_extrl_i64_i32
  tcg: Split out tcg_out_extu_i32_i64
  tcg: Split out tcg_out_exts_i32_i64
  tcg: Split out tcg_out_ext32u
  tcg: Split out tcg_out_ext32s
  tcg: Split out tcg_out_ext16u
  tcg: Split out tcg_out_ext16s
  tcg: Split out tcg_out_ext8u
  tcg: Split out tcg_out_ext8s
  tcg: Replace tcg_abort with g_assert_not_reached
  tcg: Replace if + tcg_abort with tcg_debug_assert

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/riscv: Conditionalize tcg_out_exts_i32_i64

Since TCG_TYPE_I32 values are kept sign-extended in registers, via "w"
instructions, we don't need to extend if the register matches.
This is already relied upon by comparisons.

Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Clear TCGLabelQemuLdst on allocation

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Introduce tcg_out_xchg

We will want a backend interface for register swapping.
This is only properly defined for x86; all others get a
stub version that always indicates failure.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Introduce tcg_out_movext

This is common code in most qemu_{ld,st} slow paths, extending the
input value for the store helper data argument or extending the
return value from the load helper.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Split out tcg_out_extrl_i64_i32

We will need a backend interface for type truncation.  For those backends
that did not enable TCG_TARGET_HAS_extrl_i64_i32, use tcg_out_mov.
Use it in tcg_reg_alloc_op in the meantime.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Split out tcg_out_extu_i32_i64

We will need a backend interface for type extension with zero.
Use it in tcg_reg_alloc_op in the meantime.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Split out tcg_out_exts_i32_i64

We will need a backend interface for type extension with sign.
Use it in tcg_reg_alloc_op in the meantime.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Split out tcg_out_ext32u

We will need a backend interface for performing 32-bit zero-extend.
Use it in tcg_reg_alloc_op in the meantime.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Split out tcg_out_ext32s

We will need a backend interface for performing 32-bit sign-extend.
Use it in tcg_reg_alloc_op in the meantime.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Split out tcg_out_ext16u

We will need a backend interface for performing 16-bit zero-extend.
Use it in tcg_reg_alloc_op in the meantime.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Split out tcg_out_ext16s

We will need a backend interface for performing 16-bit sign-extend.
Use it in tcg_reg_alloc_op in the meantime.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Split out tcg_out_ext8u

We will need a backend interface for performing 8-bit zero-extend.
Use it in tcg_reg_alloc_op in the meantime.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Split out tcg_out_ext8s

We will need a backend interface for performing 8-bit sign-extend.
Use it in tcg_reg_alloc_op in the meantime.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Replace tcg_abort with g_assert_not_reached

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Replace if + tcg_abort with tcg_debug_assert

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Merge tag 'pull-hex-20230421' of https://github.com/quic/qemu into staging

Hexagon update

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEENjXHiM5iuR/UxZq0ewJE+xLeRCIFAmRCu/gACgkQewJE+xLe
# RCIlnQgAkdLjTQGC+V+HKIcuD6BWCqk+fRuMAI7Ban/bq/bN5nm4xv8rWIdBAKkj
# xj1MxWgW/yns76A/OupC6tJD/1PvkdvCGUPIdRphK60raP3l1o88ivs2WsJdw9/O
# PAubqwyYNhdnEIhiA9QOVkUoh7rVVKzpri2ldRNdmxBc9tQi9POYvKSVy6rSoiQw
# rhrYfpc0fd50L4oeT1rqpCad9NrbDlCwrRSc/1oA/pUPiuxUYYr6BiIx0ytbTvH2
# aMJUdA2ynkrgxkFn3v42qOrT7M9cs1b7abHz9obWibl6Jqcl4AIoKvF/kAuDmQuV
# FAq8Qhn/cK49M9xCEZOI8olE/xIUjQ==
# =+I8i
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 21 Apr 2023 05:38:16 PM BST
# gpg:                using RSA key 3635C788CE62B91FD4C59AB47B0244FB12DE4422
# gpg: Good signature from "Taylor Simpson (Rock on) <tsimpson@quicinc.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 3635 C788 CE62 B91F D4C5  9AB4 7B02 44FB 12DE 4422

* tag 'pull-hex-20230421' of https://github.com/quic/qemu:
  Hexagon (target/hexagon) Add overrides for cache/sync/barrier instructions
  Hexagon (target/hexagon) Remove unused slot variable in helpers
  Hexagon (tests/tcg/hexagon) Move HVX test infra to header file
  Hexagon (target/hexagon) Updates to USR should use get_result_gpr
  Hexagon (target/hexagon) Add overrides for count trailing zeros/ones
  Hexagon (target/hexagon) Merge arguments to probe_pkt_scalar_hvx_stores
  Hexagon (target/hexagon) Remove redundant/unused macros
  Use black code style for python scripts
  Use f-strings in python scripts
  Hexagon (translate.c): avoid redundant PC updates on COF

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging

* Optional use of Meson wrap for slirp
* Coverity fixes
* Avoid -Werror=maybe-uninitialized
* Mark coroutine QMP command functions as coroutine_fn
* Mark functions that suspend as coroutine_mixed_fn
* target/i386: Fix SGX CPUID leaf
* First batch of qatomic_mb_read() removal
* Small atomic.rst improvement
* NBD cleanup
* Update libvirt-ci submodule

# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmRBAzwUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroP64gf+NzLW95tylCfhKuuLq/TjuOTQqHCD
# KVLlA1I3pwJfk4SUuigrnaJtwfa/tBiWxfaivUdPAzPzeXyxcVSOps0neohrmFBh
# 2e3ylBWWz22K0gkLtrFwJT99TVy6w6Xhj9SX8HPRfxl4k8yMPrUJNW78hh6APAwq
# /etZY6+ieHC7cwG4xluhxsHnxnBYBYD+18hUd+b5LchD/yvCSCNNiursutpa0Ar/
# r/HtDwNFKlaApO3sU4R3yYgdS1Fvcas4tDZaumADsQlSG5z+UeJldc98LiRlFrAA
# gnskBSaaly/NgWqY3hVCYaBGyjD4lWPkX/FEChi0XX6Fl1P0umQAv/7z3w==
# =XSAs
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 20 Apr 2023 10:17:48 AM BST
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [undefined]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (25 commits)
  tests: lcitool: Switch to OpenSUSE Leap 15.4
  tests: libvirt-ci: Update to commit '2fa24dce8bc'
  configure: Honour cross-prefix when finding ObjC compiler
  coverity: unify Fedora dockerfiles
  nbd: a BlockExport always has a BlockBackend
  docs: explain effect of smp_read_barrier_depends() on modern architectures
  qemu-coroutine: remove qatomic_mb_read()
  postcopy-ram: do not use qatomic_mb_read
  block-backend: remove qatomic_mb_read()
  target/i386: Change wrong XFRM value in SGX CPUID leaf
  monitor: mark mixed functions that can suspend
  migration: mark mixed functions that can suspend
  io: mark mixed functions that can suspend
  qapi-gen: mark coroutine QMP command functions as coroutine_fn
  target/mips: tcg: detect out-of-bounds accesses to cpu_gpr and cpu_gpr_hi
  coverity: update COMPONENTS.md
  lasi: fix RTC migration
  target/i386: Avoid unreachable variable declaration in mmu_translate()
  configure: Avoid -Werror=maybe-uninitialized
  tests: bios-tables-test: replace memset with initializer
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Merge tag 'pull-tpm-2023-04-20-1' of https://github.com/stefanberger/qemu-tpm into staging

Merge tpm 2023/04/20 v1

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEuBi5yt+QicLVzsZrda1lgCoLQhEFAmRBLgoACgkQda1lgCoL
# QhEPyQf/WfEg8k2hDLExobsSgup1IsnT+mHHTBOZVJvq2efg2YXUTHA56fmD9X6d
# crqTq68L5oaMES5iYEZhA7EAgfk3RvxDQGrlXBByPzrc6SSwEHHMR4Zzi5zrbCoW
# t6TmaKQrlQqYwkhhsbyqnG46bj0ugCDagkBLfJdVl96fjkYgTspcDxaNwqwy/DPn
# GTmQlvdRY09D1nylIdtcLBIfsM+sIkRslyngbUEIy+Bx8EWRy2a8Qw0BdY9g1XoE
# e0CaRaFMpju1KOIjq0YSIzt0LSQDFfPc1IlUAC0ZALhNmp+PPNtr4E7+4kFfO2ym
# 1sT2w25ho8dYDdm/m8tIauCdGoHw4A==
# =ML27
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 20 Apr 2023 01:20:26 PM BST
# gpg:                using RSA key B818B9CADF9089C2D5CEC66B75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE  C66B 75AD 6580 2A0B 4211

* tag 'pull-tpm-2023-04-20-1' of https://github.com/stefanberger/qemu-tpm:
  qtest: Add a test case for TPM TIS I2C connected to Aspeed I2C controller
  qtest: Move tpm_util_tis_transmit() into tpm-tis-utils.c and rename it
  qtest: Add functions for accessing devices on Aspeed I2C controller
  tests/avocado/aspeed: Add TPM TIS I2C test
  tpm: Add support for TPM device over I2C bus
  tpm: Extend common APIs to support TPM TIS I2C
  docs: Add support for TPM devices over I2C bus

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Hexagon (target/hexagon) Add overrides for cache/sync/barrier instructions

Most of these are not modelled in QEMU, so save the overhead of
calling a helper.

The only exception is dczeroa.  It assigns to hex_dczero_addr, which
is handled during packet commit.

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230410202402.2856852-1-tsimpson@quicinc.com>

Hexagon (target/hexagon) Remove unused slot variable in helpers

The slot variable in helpers was only passed to log_reg_write function
where the argument is unused.
- Remove declaration from generated helper functions
- Remove slot argument from log_reg_write

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230407204521.357244-1-tsimpson@quicinc.com>

Hexagon (tests/tcg/hexagon) Move HVX test infra to header file

This will facilitate adding additional tests in separate .c files

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230406174241.853296-1-tsimpson@quicinc.com>

Hexagon (target/hexagon) Updates to USR should use get_result_gpr

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230405164211.30015-3-tsimpson@quicinc.com>

Hexagon (target/hexagon) Add overrides for count trailing zeros/ones

The following instructions are overriden
    S2_ct0            Count trailing zeros
    S2_ct1            Count trailing ones
    S2_ct0p           Count trailing zeros (register pair)
    S2_ct1p           Count trailing ones (register pair)

These instructions are not handled by idef-parser because the
imported semantics uses bit-reverse.  However, they are
straightforward to implement in TCG with tcg_gen_ctzi_*

Test cases added to tests/tcg/hexagon/misc.c

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230405164211.30015-1-tsimpson@quicinc.com>

Hexagon (target/hexagon) Merge arguments to probe_pkt_scalar_hvx_stores

Reducing the number of arguments reduces the overhead of the helper
call

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230405164211.30015-2-tsimpson@quicinc.com>

Hexagon (target/hexagon) Remove redundant/unused macros

Remove the following macros (remnants of the old generator design)
    READ_REG
    READ_PREG
    WRITE_RREG
    WRITE_PREG
Modify macros that rely on the above

The following are unused
    READ_IREG
    fGET_FIELD
    fSET_FIELD
    fREAD_P3
    fREAD_NPC
    fWRITE_LC0
    fWRITE_LC1

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230405183048.147767-1-tsimpson@quicinc.com>

Use black code style for python scripts

Signed-off-by: Marco Liebel <quic_mliebel@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Acked-by: Taylor Simpson <tsimpson@quicinc.com>
Tested-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20230320092533.2859433-3-quic_mliebel@quicinc.com>

Use f-strings in python scripts

Replace python 2 format string with f-strings

Signed-off-by: Marco Liebel <quic_mliebel@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Tested-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20230320092533.2859433-2-quic_mliebel@quicinc.com>

Hexagon (translate.c): avoid redundant PC updates on COF

When there is a conditional change of flow or an endloop instruction, we
preload HEX_REG_PC with ctx->next_PC at gen_start_packet(). Nonetheless,
we still generate TCG code to do this update again at gen_goto_tb() when
the condition for the COF is not met, thus producing redundant
instructions. This can be seen with the following packet:

 0x004002e4:  0x5c20d000 {       if (!P0) jump:t PC+0 }

Which generates this TCG code:

   ---- 004002e4
-> mov_i32 pc,$0x4002e8
   and_i32 loc9,p0,$0x1
   mov_i32 branch_taken,loc9
   add_i32 pkt_cnt,pkt_cnt,$0x2
   add_i32 insn_cnt,insn_cnt,$0x2
   brcond_i32 branch_taken,$0x0,ne,$L1
   goto_tb $0x0
   mov_i32 pc,$0x4002e4
   exit_tb $0x7fb0c36e5200
   set_label $L1
   goto_tb $0x1
-> mov_i32 pc,$0x4002e8
   exit_tb $0x7fb0c36e5201
   set_label $L0
   exit_tb $0x7fb0c36e5203

Note that even after optimizations, the redundant PC update is still
present:

   ---- 004002e4
-> mov_i32 pc,$0x4002e8                     sync: 0  dead: 0 1  pref=0xffff
   mov_i32 branch_taken,$0x1                sync: 0  dead: 0 1  pref=0xffff
   add_i32 pkt_cnt,pkt_cnt,$0x2             sync: 0  dead: 0 1  pref=0xffff
   add_i32 insn_cnt,insn_cnt,$0x2           sync: 0  dead: 0 1 2  pref=0xffff
   goto_tb $0x1
-> mov_i32 pc,$0x4002e8                     sync: 0  dead: 0 1  pref=0xffff
   exit_tb $0x7fb0c36e5201
   set_label $L0
   exit_tb $0x7fb0c36e5203

With this patch, the second redundant update is properly discarded.

Note that we need the additional "move_to_pc" flag instead of just
avoiding the update whenever `dest == ctx->next_PC`, as that could
potentially skip updates from a COF with met condition, whose
ctx->branch_dest just happens to be equal to ctx->next_PC.

Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <fc059153c3f0526d97b7f13450c02b276b0908e1.1679519341.git.quic_mathbern@quicinc.com>

Merge tag 'pull-request-2023-04-20' of https://gitlab.com/thuth/qemu into staging

* Compat machines for version 8.1
* Allow setting a chardev input file on the command line
* Fix .travis.yml to work with non-public Travis instances, too
* Move a lot of code from specifc_ss into softmmu_ss
* Add a test case for TPM TIS I2C connected to Aspeed I2C controller
* Update tests/vm/freebsd to version 13
* Some more misc minor fixes here and there

# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmRBDtMRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbXfjw//UYytlyZsDOLAMfFNGQViMmVf29KbrDRe
# doDh4Nl1oZLNKm9C5XlQExhsRbLm6Hi9nyQvSCJs4CvZ1jBY6U7GfgMNIaozXWb3
# 4gQyJb9ACe/z8bQmPUVF2sdW1QZ9zpf8LWpCOTGUZiI2Tevzkz7b/F5ZxiQiseG6
# dXe8UIwdZhG4jz2+6viqjHiGlKoBkegGYoJthcwnR07aRz2woiNr7rKRiJEiv2G7
# UfMVB96uLkpEhaDoohz440/rjviazO1nt6HDvgEajXT1X5P/8phT9IvT7olAZXZH
# R2Qm6YyYcSWavoPms3AryAWG8FjomcyBjuebfAVW5/x+fl/401sn9quBMoZrYPEX
# dfzF64vVokdXNQEH6+qc95PdB6/+d0CZPY8ilMRtAttf2sMw7IgqhG3zDLbj9t6R
# dns2/DY9zu2pp07IEAXn/iVbW4rl2HADUQncr6B/cPy++lYiFvv7LX8OE+YWOsk0
# gvxzYx6rRhr5j7xT1sP30pLwsG3mX7qRDfba1Bt19CzSbu7UGN+w+S1xclgZDoqE
# 0AZIeVUuqqNTEoBLoa2xHUDGs9NjeI2+qIh0R5csS/bqDscLXj0cOluvJO48n4Rt
# +SGQSCSmU/lxn6EbBz4tw3orlp0clBH9fEaSg9lYxuUTYvQOpdYS7u4d63VQFvzp
# dwQ9LRDFNsA=
# =8ZFL
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 20 Apr 2023 11:07:15 AM BST
# gpg:                using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg:                issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [undefined]
# gpg:                 aka "Thomas Huth <thuth@redhat.com>" [undefined]
# gpg:                 aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# gpg:                 aka "Thomas Huth <huth@tuxfamily.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3  EAB9 2ED9 D774 FE70 2DB5

* tag 'pull-request-2023-04-20' of https://gitlab.com/thuth/qemu: (23 commits)
  tests/vm/freebsd: Update to FreeBSD 13.2
  qtest: Add a test case for TPM TIS I2C connected to Aspeed I2C controller
  qtest: Move tpm_util_tis_transmit() into tpm-tis-utils.c and rename it
  qtest: Add functions for accessing devices on Aspeed I2C controller
  MAINTAINERS: Add Juan Quintela to developer guides review
  cpu: Remove parameter of list_cpus()
  hw/core: Move numa.c into the target independent source set
  softmmu: Move dirtylimit.c into the target independent source set
  hw/display: Compile vga.c as target-independent code
  softmmu: Make qtest.c target independent
  include/exec: Provide the tswap() functions for target independent code, too
  softmmu/qtest: Move the target-specific pseries RTAS code out of qtest.c
  hw/char: Move two more files from specific_ss to softmmu_ss
  target/i386: Set family/model/stepping of the "max" CPU according to LM bit
  tests/migration: Only run auto_converge in slow mode
  travis.yml: Add missing 'flex', 'bison' packages to 'GCC (user)' job
  travis.yml: Add missing clang-10 package to the 'Clang (disable-tcg)' job
  chardev: Allow setting file chardev input file on the command line
  qtest: Don't assert on "-qtest chardev:myid"
  test: Fix test-crypto-secret when compiling without keyring support
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Merge tag 'pull-target-arm-20230420' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
 * hw/arm: Fix some typos in comments (most found by codespell)
 * exynos: Fix out-of-bounds access in exynos4210_gcomp_find debug printf
 * Orangepi-PC, Cubieboard: add Allwinner WDT watchdog emulation
 * tests/avocado: Add reboot tests to Cubieboard
 * hw/timer/imx_epit: Fix bugs in timer limit checking
 * target/arm: Remove KVM AArch32 CPU definitions
 * hw/arm/virt: Restrict Cortex-A7 check to TCG
 * target/arm: Initialize debug capabilities only once
 * target/arm: Implement FEAT_PAN3
 * docs/devel/kconfig.rst: Fix incorrect markup
 * target/arm: Report pauth information to gdb as 'pauth_v2'
 * mcimxd7-sabre, mcimx6ul-evk: Correctly model the way the PHY
   on the second ethernet device must be configured via the
   first one

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmRBDfkZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3rtLD/93hJ+CEUnATXx7Ic7g0EvN
# eXIMsgd80pd1gn4PKzP9lol6I40VDuozs9mb9jP6+Hc0tEoOua4KlIvyMlYy4wSx
# eJBqt/gx/N/V+jwVG8seY+ifLIzECMLMOQIRQqQoVk+scENuiJIXcJRH5A1eUWNb
# iV0QfJa1gQrKyyIG9vNfZ+cS+xy0bl0E9FlZ0ty3zeh0xBaMhUqnpraTVLISWelP
# OEovcIBEzvD/ngj+7F/xKBGgtSTZ1FuN5p/oOFDCH2Fihe2+wuw7B3Rc1SbHLG7n
# Wr4JZozdPbnudhrZgn+1A9SCFhH+B8k/QlKY2Qc+w+GrnC0JpJAmqtaF2aIaepPo
# kfbTUshDstIZ7MnCeAa+SWn2Exgrsn0Gv9nWdOrPgrvo0bqK6ceAhchi5nFmkkaJ
# MOy+Xx5GIAE91418wR8C2TlrTl58A81s15AYY1D7nZ0GeuZV5io7wPIAOWa14rOQ
# RdvQ/0rcZ+IkOFXz5Zj/L/Y/W4BpDyfuUVzLAah56zYkuV4im2cLt3YAOMFYZjjO
# 6W1sdbAcuA5QFmO4v5VmcTU8t/B423QzcnssE6sbM0nazMh/i6kjzvJUhdJTQmi+
# lKjIe+MHutTgrbjrwemjiafk3dOpFpKtso/4C/dhP2UfDIcKuGXNpSYxCvoknO2j
# TWvxRvir/PC7gzUzA4CrwQ==
# =YUUL
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 20 Apr 2023 11:03:37 AM BST
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]

* tag 'pull-target-arm-20230420' of https://git.linaro.org/people/pmaydell/qemu-arm: (21 commits)
  arm/mcimx7d-sabre: Set fec2-phy-connected property to false
  fsl-imx7: Add fec[12]-phy-connected properties
  arm/mcimx6ul-evk: Set fec1-phy-connected property to false
  fsl-imx6ul: Add fec[12]-phy-connected properties
  hw/net/imx_fec: Support two Ethernet interfaces connected to single MDIO bus
  target/arm: Report pauth information to gdb as 'pauth_v2'
  docs/devel/kconfig.rst: Fix incorrect markup
  target/arm: Implement FEAT_PAN3
  target/arm: Don't set ISV when reporting stage 1 faults in ESR_EL2
  target/arm: Pass ARMMMUFaultInfo to merge_syn_data_abort()
  target/arm: Initialize debug capabilities only once
  hw/arm/virt: Restrict Cortex-A7 check to TCG
  target/arm: Remove KVM AArch32 CPU definitions
  hw/timer/imx_epit: fix limit check
  hw/timer/imx_epit: don't shadow variable
  tests/avocado: Add reboot tests to Cubieboard
  hw/arm: Add WDT to Allwinner-H3 and Orangepi-PC
  hw/arm: Add WDT to Allwinner-A10 and Cubieboard
  hw/watchdog: Allwinner WDT emulation for system reset
  exynos: Fix out-of-bounds access in exynos4210_gcomp_find debug printf
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

qtest: Add a test case for TPM TIS I2C connected to Aspeed I2C controller

Add a test case for the TPM TIS I2C device exercising most of its
functionality, including localities.

Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Ninad Palsule<ninad@linux.ibm.com>
Message-id: 20230331173051.3857801-4-stefanb@linux.ibm.com

qtest: Move tpm_util_tis_transmit() into tpm-tis-utils.c and rename it

To be able to remove tpm_tis_base_addr from test cases that do not really
need it move the tpm_util_tis_transmit() function into tpm-tis-utils.c and
rename it to tpm_tis_transmit().

Fix a locality parameter in a test case on the way.

Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20230331173051.3857801-3-stefanb@linux.ibm.com

qtest: Add functions for accessing devices on Aspeed I2C controller

Add read and write functions for accessing registers of I2C devices
connected to the Aspeed I2C controller.

Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-id: 20230331173051.3857801-2-stefanb@linux.ibm.com

tests/avocado/aspeed: Add TPM TIS I2C test

Add a new buildroot image based test that attaches a TPM emulator to the
I2C bus and checks for a known PCR0 value for the image that was booted.

Note that this does not tear down swtpm process when qemu execution fails.
The swtpm process will exit when qemu exits if a connection has been
made, but if the test errors before connection then the swtpm process
will still be around.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
Message-id: 20230328120844.190914-1-joel@jms.id.au

tpm: Add support for TPM device over I2C bus

Qemu already supports devices attached to ISA and sysbus. This drop adds
support for the I2C bus attached TPM devices. I2C model only supports
TPM2 protocol.

This commit includes changes for the common code.
- Added I2C emulation model. Logic was added in the model to temporarily
  cache the data as I2C interface works per byte basis.
- New tpm type "tpm-tis-i2c" added for I2C support. The user has to
  provide this string on command line.

Testing:
  TPM I2C device module is tested using SWTPM (software based TPM
  package). Qemu uses the rainier machine and is connected to swtpm over
  the socket interface.

  The command to start swtpm is as follows:
  $ swtpm socket --tpmstate dir=/tmp/mytpm1    \
                 --ctrl type=unixio,path=/tmp/mytpm1/swtpm-sock  \
                 --tpm2 --log level=100

  The command to start qemu is as follows:
  $ qemu-system-arm -M rainier-bmc -nographic \
            -kernel ${IMAGEPATH}/fitImage-linux.bin \
            -dtb ${IMAGEPATH}/aspeed-bmc-ibm-rainier.dtb \
            -initrd ${IMAGEPATH}/obmc-phosphor-initramfs.rootfs.cpio.xz \
            -drive file=${IMAGEPATH}/obmc-phosphor-image.rootfs.wic.qcow2,if=sd,index=2 \
            -net nic -net user,hostfwd=:127.0.0.1:2222-:22,hostfwd=:127.0.0.1:2443-:443 \
            -chardev socket,id=chrtpm,path=/tmp/mytpm1/swtpm-sock \
            -tpmdev emulator,id=tpm0,chardev=chrtpm \
            -device tpm-tis-i2c,tpmdev=tpm0,bus=aspeed.i2c.bus.12,address=0x2e

Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Tested-by: Joel Stanley <joel@jms.id.au>
Message-id: 20230414220754.1191476-4-ninadpalsule@us.ibm.com

tpm: Extend common APIs to support TPM TIS I2C

Qemu already supports devices attached to ISA and sysbus. This drop adds
support for the I2C bus attached TPM devices.

This commit includes changes for the common code.
- Added support for the new checksum registers which are required for
  the I2C support. The checksum calculation is handled in the qemu
  common code.
- Added wrapper function for read and write data so that I2C code can
  call it without MMIO interface.

The TPM TIS I2C spec describes in the table in section "Interface Locality
Usage per Register" that the TPM_INT_ENABLE and TPM_INT_STATUS registers
must be writable for any locality even if the locality is not the active
locality. Therefore, remove the checks whether the writing locality is the
active locality for these registers.

Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Tested-by: Joel Stanley <joel@jms.id.au>
Message-id: 20230414220754.1191476-3-ninadpalsule@us.ibm.com

docs: Add support for TPM devices over I2C bus

This is a documentation change for I2C TPM device support.

Qemu already supports devices attached to ISA and sysbus.
This drop adds support for the I2C bus attached TPM devices.

Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 20230414220754.1191476-2-ninadpalsule@us.ibm.com

arm/mcimx7d-sabre: Set fec2-phy-connected property to false

On mcimx7d-sabre, the MDIO bus is connected to the first Ethernet
interface. Set fec2-phy-connected to false to reflect this.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20230315145248.1639364-6-linux@roeck-us.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

fsl-imx7: Add fec[12]-phy-connected properties

Add fec[12]-phy-connected properties and use it to set phy-connected
and phy-consumer properties for imx_fec.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20230315145248.1639364-5-linux@roeck-us.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

arm/mcimx6ul-evk: Set fec1-phy-connected property to false

On mcimx6ul-evk, the MDIO bus is connected to the second Ethernet
interface. Set fec1-phy-connected to false to reflect this.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20230315145248.1639364-4-linux@roeck-us.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

fsl-imx6ul: Add fec[12]-phy-connected properties

Add fec[12]-phy-connected properties and use it to set phy-connected
and phy-consumer properties for imx_fec.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20230315145248.1639364-3-linux@roeck-us.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

tests/vm/freebsd: Update to FreeBSD 13.2

According to QEMU's support policy, we stop supporting the previous
major release two years after the the new major release has been
published. So we can stop testing FreeBSD 12 now and should switch
our FreeBSD VM to version 13 instead.

Some changes are needed for this update: The downloadable .ISO images
do not use the serial port as console by default anymore, so they
are not usable in the same way as with FreeBSD 12. Fortunately, the
FreeBSD project now also offers some pre-installed CI images that
have the serial console enabled, so we can use those now, with the
benefit that we can skip almost all parts of the previous installation
process.

Message-Id: <20230419144553.719749-1-thuth@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

hw/net/imx_fec: Support two Ethernet interfaces connected to single MDIO bus

The SOC on i.MX6UL and i.MX7 has 2 Ethernet interfaces. The PHY on each may
be connected to separate MDIO busses, or both may be connected on the same
MDIO bus using different PHY addresses. Commit 461c51ad4275 ("Add a phy-num
property to the i.MX FEC emulator") added support for specifying PHY
addresses, but it did not provide support for linking the second PHY on
a given MDIO bus to the other Ethernet interface.

To be able to support two PHY instances on a single MDIO bus, two properties
are needed: First, there needs to be a flag indicating if the MDIO bus on
a given Ethernet interface is connected. If not, attempts to read from this
bus must always return 0xffff. Implement this property as phy-connected.
Second, if the MDIO bus on an interface is active, it needs a link to the
consumer interface to be able to provide PHY access for it. Implement this
property as phy-consumer.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20230315145248.1639364-2-linux@roeck-us.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

qtest: Add a test case for TPM TIS I2C connected to Aspeed I2C controller

Add a test case for the TPM TIS I2C device exercising most of its
functionality, including localities.

Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Ninad Palsule<ninad@linux.ibm.com>
Message-Id: <20230331173051.3857801-4-stefanb@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

qtest: Move tpm_util_tis_transmit() into tpm-tis-utils.c and rename it

To be able to remove tpm_tis_base_addr from test cases that do not really
need it move the tpm_util_tis_transmit() function into tpm-tis-utils.c and
rename it to tpm_tis_transmit().

Fix a locality parameter in a test case on the way.

Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230331173051.3857801-3-stefanb@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

qtest: Add functions for accessing devices on Aspeed I2C controller

Add read and write functions for accessing registers of I2C devices
connected to the Aspeed I2C controller.

Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
Message-Id: <20230331173051.3857801-2-stefanb@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

MAINTAINERS: Add Juan Quintela to developer guides review

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230419163457.17175-1-quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

cpu: Remove parameter of list_cpus()

The "optarg" parameter is completely unused, so let's drop it.

Message-Id: <20230419124831.678079-1-thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

hw/core: Move numa.c into the target independent source set

There is nothing that depends on target specific macros in this
file, so we can move it to the common source set to avoid that
we have to compile this file multiple times (one time for each
target).

Message-Id: <20230413182636.139356-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

softmmu: Move dirtylimit.c into the target independent source set

dirtylimit.c just uses one TARGET_PAGE_SIZE macro - change it to
qemu_target_page_size() so we can move thefile into the target
independent source set. Then we only have to compile this file
once during the build instead of multiple times (one time for
each target).

Message-Id: <20230413054509.54421-1-thuth@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>

hw/display: Compile vga.c as target-independent code

The target checks here are only during the initialization, so they
are not performance critical. We can switch these to runtime checks
to avoid that we have to compile this file multiple times during
the build, and make the code ready for an universal build one day.

Message-Id: <20230412163501.36770-1-thuth@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>

softmmu: Make qtest.c target independent

The code in this file is not performance critical, so we can use
the target independent endianess functions to only compile this
file once for all targets.

Message-Id: <20230411183418.1640500-4-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

include/exec: Provide the tswap() functions for target independent code, too

In some cases of target independent code, it would be useful to have access
to the functions that swap endianess in case it differs between guest and
host. Thus re-implement the tswapXX() functions in a new header that can be
included separately. The check whether the swapping is needed continues to
be done at compile-time for target specific code, while it is done at
run-time in target-independent code.

Message-Id: <20230411183418.1640500-3-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

softmmu/qtest: Move the target-specific pseries RTAS code out of qtest.c

Ideally, qtest.c should be independent from target specific code, so
we only have to compile it once for all targets. Thus start improving
the situation by moving the pseries related code to hw/ppc/spapr_rtas.c
instead and allow target code to register a callback handler for such
target specific commands.

Message-Id: <20230411183418.1640500-2-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

hw/char: Move two more files from specific_ss to softmmu_ss

The code for these two devices seems to be independent from any
target specific macros. "riscv_htif.c" is used for both, riscv32 and
riscv64, so by moving this to the common code source set, we can
avoid to compile it twice every time.
"goldfish_tty.c" is only used for one target at the moment, but
since it is a paravirtualized device, it could get useful for other
targets one day, so let's move it now, too.

Message-Id: <20230411173206.1511621-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

target/i386: Set family/model/stepping of the "max" CPU according to LM bit

We want to get rid of the "#ifdef TARGET_X86_64" compile-time switch
in the long run, so we can drop the separate compilation of the
"qemu-system-i386" binary one day - but we then still need a way to
run a guest with max. CPU settings in 32-bit mode. So the "max" CPU
should determine its family/model/stepping settings according to the
"large mode" (LM) CPU feature bit during runtime, so that it is
possible to run "qemu-system-x86_64 -cpu max,lm=off" and still get
a sane family/model/stepping setting for the guest CPU.

To be able to check the LM bit, we have to move the code that sets
up these properties to a "realize" function, since the LM setting is
not available yet when the "instance_init" function is being called.

Message-Id: <20230306154311.476458-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

tests/migration: Only run auto_converge in slow mode

Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230412142001.16501-3-quintela@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>