OSDN Git Service
Arun Siluvery [Mon, 3 Aug 2015 19:24:56 +0000 (20:24 +0100)]
drm/i915:skl: Add WaEnableGapsTsvCreditFix
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Tested-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90854
Tested-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Animesh Manna [Mon, 3 Aug 2015 16:25:32 +0000 (21:55 +0530)]
drm/i915/gen9: Removed byte swapping for csr firmware
This patch contains the changes to remove the byte
swapping logic introduced with old dmc firmware.
While debugging PC10 entry issue for skylake found
with latest dmc firmware version 1.18 without byte
swapping dmc is working fine and able to enter PC10.
Note that apparently this was changed with dmc version 1.0 and earlier
ones indeed are byteswapped like this ...
v1: Initial version.
v2: Corrected firmware size during memcpy(). (Suggested by Sunil)
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Sunil Kamath <sunil.kamath@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Reviewed-by: A.Sunil Kamath <sunil.kamath@intel.com>
[danvet: Add note that this only holds for released dmc firmware.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Thulasimani,Sivakumar [Fri, 31 Jul 2015 05:35:27 +0000 (11:05 +0530)]
drm/i915: read bpp from vbt only for older panels
BPP bits defined in VBT should be used only on panels whose
edid version is 1.3 or older. EDID version 1.4 introduced offsets
where bpp is defined and read into display_info, hence bpp from
VBT will be used only when bpc in display_info is zero.
v2: use display_info.bpc for deciding when to use vbt_bpp (Jani)
Signed-off-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Thu, 30 Jul 2015 21:20:29 +0000 (18:20 -0300)]
drm/i915/skl: send opregion_nofify_adapter(PCI_D1) instead of PCI_D3
I was told that the "repurposed D1 definition" is still valid for SKL.
It is BDW that is special due to its hotplug bug, so let's
special-case BDW instead of HSW.
Cc: Kristen Carlson Accardi <kristen@linux.intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Damien Lespiau [Thu, 30 Jul 2015 21:20:27 +0000 (18:20 -0300)]
drm/i915: Extract a intel_power_well_disable() function
Similar to the ->enable vfunc in patch "drm/i915: Extract a
intel_power_well_enable() function".
v2 (from Paulo):
- Same s/i915_/intel_/ bikeshed as the previous patch.
- Update the commit hash.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Damien Lespiau [Thu, 30 Jul 2015 21:20:26 +0000 (18:20 -0300)]
drm/i915: Extract a intel_power_well_enable() function
We need a bit book keeping around power wells' ops->enable(), namely a
nice debug message and updating hw_enabled. Let's introduce a
intel_power_well_enable() function to make sure all the callers do the
same things.
v2 (from Paulo):
- s/i915_power_well_enable/intel_power_well_enable/ since everything
else on this file uses intel_ instead of i915_.
- Fix typo in commit message.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Marc Herbert [Wed, 29 Jul 2015 19:21:22 +0000 (12:21 -0700)]
drm/i915/skl: revert duplicated WaBarrierPerformanceFixDisable:skl
With this simple git diff command one can see that skl_init_workarounds()
got two copies of WaBarrierPerformanceFixDisable:skl:
git diff -U21
ca6e4405779e^1
ca6e4405779e drivers/gpu/drm/i915/intel_ringbuffer.c
This happened when the backmerge of drm-intel-fixes-2015-07-15
Merged the same fix on both sides. Same fix but not identical enough for
git: with a different surrounding context; hence the code duplication.
This commit merely reverts the output of the git command above
= the duplication introduced in the backmerge.
(This duplication was found while running git sanity checks on a
_linearized_ i915 forklift for ChromeOS.)
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rodrigo Vivi [Fri, 31 Jul 2015 00:07:55 +0000 (17:07 -0700)]
drm/i915: VLV/CHV PSR: Increase wait delay time before active PSR.
Since active function on VLV immediately activate PSR let's give more
time for idleness. Different from core platforms where we have idle_frames
count.
Also kms_psr_sink_crc now is automated and always get this:
[drm:intel_enable_pipe] enabling pipe A
[drm:intel_edp_backlight_on]
[drm:intel_panel_enable_backlight] pipe
[drm:intel_panel_enable_backlight] pipe A
[drm:intel_panel_actually_set_backlight] set backlight PWM = 7812
PSR gets enabled somewhere here after backlight.
[drm:intel_get_hpd_pins] hotplug event received, stat 0x00000000, dig 0x0
[drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
[drm:vlv_update_wm] Setting FIFO watermarks - A: plane=391, cursor=63, sp
PSR gets flushed around here by intel_atomic_commit
[drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
[drm:vlv_update_wm] Setting FIFO watermarks - A: plane=391, cursor=63, sp
[drm:intel_set_memory_cxsr] memory self-refresh is enabled
[drm:intel_connector_check_state] [CONNECTOR:39:eDP-1]
[drm:check_encoder_state] [ENCODER:30:DAC-30]
[drm:check_encoder_state] [ENCODER:31:TMDS-31]
[drm:check_encoder_state] [ENCODER:36:TMDS-36]
[drm:check_encoder_state] [ENCODER:38:TMDS-38]
[drm:check_crtc_state] [CRTC:21]
[drm:check_crtc_state] [CRTC:26]
[drm:intel_psr_activate [i915]] *ERROR* PSR Active
[drm:intel_get_hpd_pins] hotplug event received, stat 0x00000000, dig 0x
[drm:intel_set_cpu_fifo_underrun_reporting [i915]] *ERROR* pipe A underrun
[drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO
Underrun.
It is true that in a product we won't keep disabling and enabling planes so
frequently, but for safeness let's stay conservative.
It is also true that 500ms is an etternity. But PSR is anyway a power saving
feature for idle scenario. So if it is idle feature stays on and 500ms to get
it reanabled is not that insane.
v2: Rebase over intel_psr.c and fix typo.
v3: Revival: Manual tests indicated that this is needed. With a short delay
there is a huge risk of getting blank screens when planes are being enabled.
v4: Revival 2 with reasonable delay. 1/2 sec instead of 5. VBT is 10 sec but
actually time for link training what we aren't doing, but with only 100 sec
in some cases kms_psr_sink_crc manual was showing blank screen,
so let's use this for now. Also changed comment by a FIXME.
v5: Rebase after a long time, remove FIXME and update comment above.
v6: msecs_to_jiffies is already on delay. remove duplication.
v7: use msecs_to_jiffies on schedule_delayed_work call.
Reviewed-by: Durgadoss R <durgadoss.r@intel.com> (v4)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-By: Intel Graphics QA PRTS (Patch Regression Test System Contact: shuang.he@intel.com)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rodrigo Vivi [Thu, 30 Jul 2015 23:26:39 +0000 (16:26 -0700)]
drm/i915: Split sink_crc function in start, stop and read.
This is just a preparation patch to make clear what operation we
are performing. There is no functional change on the sink crc
logic.
hsw_disable_ips has been moved a bit further in the start function
to avoid disabling ips when sink crc is not going to be started.
and to avoid goto on this function.
v2: explain why hsw_disable_ips() call place has changed.
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Tue, 14 Jul 2015 19:29:14 +0000 (16:29 -0300)]
drm/i915: special-case dirtyfb for frontbuffer tracking
First, an introduction. We currently have two types of GTT mmaps: the
"normal" old mmap, and the WC mmap. For frontbuffer-related features
that have automatic hardware tracking, only the non-WC mmap writes are
detected by the hardware. Since inside the Kernel both are treated as
ORIGIN_GTT, any features ignoring ORIGIN_GTT because of the hardware
tracking are destined to fail.
One of the special rules defined for the WC mmaps is that the user
should call the dirtyfb IOCTL after he is done using the pointers, so
that results in an intel_fb_obj_flush() call. The problem is that the
dirtyfb is passing ORIGIN_GTT, so it is being ignored by FBC - even
though the hardware tracking is not detecing the WC mmap operations.
So in order to fix that without having to give up the automatic
hardware tracking for GTT mmaps we transform the flush operation from
dirtyfb into a special operation: ORIGIN_DIRTYFB.
This commit fixes all the kms_frontbuffer_tracking subtests that
contain "fbc" and "mmap-wc" in their names and are currently failing
(for a total of 16 subtests).
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Tue, 14 Jul 2015 19:29:13 +0000 (16:29 -0300)]
drm/i915: don't disable FBC for pipe A when flipping pipe B
Use the appropriate call.
I know there's a discussion about whether we need this call here at
all, but removing the call means we'll only update FBC after we get
the page flip IRQ. So the user may only see the new frame a little
after it should. Let's wait just a little bit more before removing
this call since we can rely in the HW tracking for accurate flips.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Tue, 14 Jul 2015 19:29:11 +0000 (16:29 -0300)]
drm/i915: don't call intel_fbc_update() at intel_unpin_work_fn()
Because intel_unpin_work_fn() already calls
intel_frontbuffer_flip_complete() which will call intel_fbc_flush()
which will call intel_fbc_update() when needed.
We couldn't fix this previously due to the fact that FBC was not
properly behaving as intended on frontbuffer flushes, but now that
this is fixed, we can remove the additional call.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Tue, 14 Jul 2015 19:29:10 +0000 (16:29 -0300)]
drm/i915: fix FBC frontbuffer tracking flushing code
Due to the way busy_bits was handled, we were not doing any flushes if
we didn't previously get an invalidate. Since it's possible to get
flushes without an invalidate first, remove the busy_bits early
return.
So now that we don't have the busy_bits guard anymore we'll need the
origin check for the GTT tracking (we were not doing anything on GTT
flushes due to the GTT check at invalidate()).
As a last detail, since we can get multiple consecutive flushes,
disable FBC before updating it, otherwise intel_fbc_update() will just
keep FBC enabled instead of restarting it.
Notice that this does not fix any of the current IGT tests due to the
fact that we still have a few intel_fbc() calls at points where we
also have the frontbuffer tracking calls: we didn't fully convert to
frontbuffer tracking yet. Once we remove those calls and start relying
only on the frontbuffer tracking infrastructure we'll need this patch.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Fri, 31 Jul 2015 07:52:56 +0000 (09:52 +0200)]
drm/i915: Update DRIVER_DATE to
20150731
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Hanno Böck [Wed, 29 Jul 2015 08:31:04 +0000 (10:31 +0200)]
drm/i915: Fix command parser table validator
As we may like to use a bisection search on the tables in future, we
need them to be ordered. For convenience we expect the compiled tables
to be order and check on initialisation. However, the validator used the
wrong iterators failed to spot the misordered MI tables and instead
walked off into the unknown (as spotted by kasan).
Signed-off-by: Hanno Boeck <hanno@hboeck.de>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Again hand-assemble patch ...]
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Hanno Böck [Wed, 29 Jul 2015 08:29:58 +0000 (10:29 +0200)]
drm/i915: Properly sort MI coomand table
In the future, we may want to speed up command/register searching using
a bisection and so we require them to be in ascending order respectively
by command value or register address. However, this was not true for one
pair in the MI table; make it so.
Signed-off-by: Hanno Boeck <hanno@hboeck.de>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Hand-assemble patch from raw patch from Hanno and commit message from Chris.]
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Rodrigo Vivi [Thu, 23 Jul 2015 23:35:46 +0000 (16:35 -0700)]
drm/i915: Don't return error on sink crc stop.
If we got to the point where we are trying to stop sink CRC
the main output of this function was already gotten properly,
so don't return the error and let userspace use the crc data.
Let's replace the errnos returns with some log messages.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rodrigo Vivi [Thu, 23 Jul 2015 23:35:45 +0000 (16:35 -0700)]
drm/i915: Try to stop sink crc calculation on error.
Right now if we face any kind of error sink crc calculation
stays enabled.
So, let's give a shot and try to stop it anyway if it got enabled.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Mon, 27 Jul 2015 09:26:26 +0000 (10:26 +0100)]
drm/i915: Keep the mm.bound_list in rough LRU order
When we shrink our working sets, we want to avoid stealing pages from
objects that likely to be reused in the near future. We first look at
inactive objects before processing active objects - but what about a
recently active object that is about to be used again. That object's
position in the bound_list is ordered by the time of binding, not the
time of last use, so the most recently used inactive object could well
be at the head of the shrink list. To compensate, give the object a bump
to MRU when it becomes inactive (thus transitioning to the end of the
first pass in shrink lists). Conversely, bumping on inactive makes
bumping on active useless, since when we do have to reap from the active
working set, everything is going to become inactive very quickly and the
order pretty much random - just hope for the best at that point, as once
we start stalling on active objects, we can hope that the rebinding
neatly orders vital objects.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
[danvet: Resolve merge conflict.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Mon, 27 Jul 2015 09:47:38 +0000 (11:47 +0200)]
drm/i915: Fake AGP is dead
Remove the leftovers, yay!
AGP for i915 kms died long ago with
commit
3bb6ce66866310f50d461b9eff949c1ce95560ce
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Wed Nov 13 22:14:16 2013 +0100
drm/i915: Kill legeacy AGP for gen3 kms
and with ums now gone to there's really no users any more.
Note that device_is_agp is only called when DRIVER_USE_AGP is set and
since we've unconditionally cleared that since a while there are
really no users left for i915_driver_device_is_agp.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Daniel Vetter [Fri, 24 Jul 2015 15:40:15 +0000 (17:40 +0200)]
drm/i915: kerneldoc for tiling IOCTL and swizzle functions
Chris rightfully suggested that documenting fences without documenting
the BO tiling tracking doesn't make much sense, so fix that.
The important bit to stress here (since it lead to some confusion) is
the GEM doesn't really care about tiling. Except for a few select cases
where the kernel needs to manage something that userspace can't take
care of: Namely the limited number of fences and fixing up swizzling,
although we still fail at the later.
v2: Move the low-level tiling/swizzling functions and kerneldoc to
i915_gem_fence.c and leave only the userspace interface here.
Suggested by Chris.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Daniel Vetter [Fri, 24 Jul 2015 15:40:14 +0000 (17:40 +0200)]
drm/i915: Move low-level swizzling code to i915_gem_fence.c
It fits more with the low-level fence code, and this move leaves only
the userspace tiling ioctl handling in i915_gem_tiling.c.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Daniel Vetter [Fri, 24 Jul 2015 15:40:13 +0000 (17:40 +0200)]
drm/i915: Remove bogus kerneldoc include directive
Afaict intel_irq_fini never existed. No idea how that one came
about.
Note: Chris thinks that an irq_fini would be nice and I agree, but
this is just to remove some ugly from generated docs.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Fri, 24 Jul 2015 15:40:12 +0000 (17:40 +0200)]
drm/i915: kerneldoc for fences
v2: Clarify that this is about fence _registers_. Also clarify that
the fence code revokes cpu ptes and not gtt ptes. Both suggested by
Chris.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Daniel Vetter [Fri, 24 Jul 2015 11:55:11 +0000 (13:55 +0200)]
drm/i915: Extract i915_gem_fence.c
No code changes, just moving all the fence related code into a
separate file (and avoiding a bunch of forward declarations while at
it).
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Daniel Vetter [Fri, 24 Jul 2015 11:55:10 +0000 (13:55 +0200)]
drm/i915: Clean up Makefile
Sorting became confused and a few new files ended up in strange
places. Also move i915_irq.c to core since with the recent-ish
extraction of i915_gpu_error.c and intel_hotplug.c it's more and more
really just basic irq handling code.
When adding new files please don't put them somewhere randomly.
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Imre Deak [Mon, 20 Jul 2015 21:43:39 +0000 (14:43 -0700)]
drm/i915/bxt: add support for HPD long/short pulse detection on HPD_PORT_A pin
This is a requirement for enabling display port HPD support on the port
A HPD pin. This support is to be added by follow-up patches.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Sonika Jindal <sonika.jindal@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Imre Deak [Tue, 21 Jul 2015 22:32:45 +0000 (15:32 -0700)]
drm/i915: don't use HPD_PORT_A as an alias for HPD_NONE
Currently HPD_PORT_A is used as an alias for HPD_NONE to mean that the
given port doesn't support long/short HPD pulse detection. SDVO and CRT
ports are like this and for these ports we only want to know whether an
hot plug event was detected on the corresponding pin. Since at least on
BXT we need long/short pulse detection on PORT A as well (added by the
next patch) remove this aliasing of HPD_PORT_A/HPD_NONE and let the
return value of intel_hpd_pin_to_port() show whether long/short pulse
detection is supported on the passed in pin.
No functional change.
v2:
- rebase on top of -nightly (Daniel)
- make the check for intel_hpd_pin_to_port() return value more readable
(Sivakumar)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Sonika Jindal <sonika.jindal@intel.com>
Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Imre Deak [Tue, 21 Jul 2015 22:32:44 +0000 (15:32 -0700)]
drm/i915: combine i9xx_get_hpd_pins and pch_get_hpd_pins
These functions are quite similar, so combine them with the use of a new
argument for a function that detects long pulses. This will be also
needed by an upcoming patch adding support for BXT long pulse detection.
No functional change.
v2:
- rebase on top -nightly (Daniel)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Sonika Jindal <sonika.jindal@intel.com>
Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Sudip Mukherjee [Tue, 21 Jul 2015 12:06:46 +0000 (17:36 +0530)]
drm/i915: remove redundant if check
The extra check for connector_type is not required as we are already
checking for connector_type != DRM_MODE_CONNECTOR_DisplayPort.
The check was added by commit
eb3394faeb97 ("drm/i915: Add debugfs test
control files for Displayport compliance testing")
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Sudip Mukherjee [Tue, 21 Jul 2015 12:06:45 +0000 (17:36 +0530)]
drm/i915: remove unnecessary null test
While creating the debugfs file we are setting the inode->i_private to
dev. That same dev is passed to these functions as private of struct
seq_file via single_open(). Moreover single_open is setting
file->private_data->private to dev.
So at this point it can never be NULL.
This check was added by commit
eb3394faeb97 ("drm/i915: Add debugfs test
control files for Displayport compliance testing")
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Arun Siluvery [Mon, 20 Jul 2015 09:46:10 +0000 (10:46 +0100)]
drm/i915: Add provision to extend Golden context batch
The Golden batch carries 3D state at the beginning so that HW starts with
a known state. It is carried as a binary blob which is auto-generated from
source. The idea was it would be easier to maintain and keep the complexity
out of the kernel which makes sense as we don't really touch it. However if
you really need to update it then you need to update generator source and
keep the binary blob in sync with it.
There is a need to patch this in bxt to send one additional command to enable
a feature. A solution was to patch the binary data with some additional
data structures (included as part of auto-generator source) but it was
unnecessarily complicated.
Chris suggested the idea of having a secondary batch and execute two batch
buffers. It has clear advantages as we needn't touch the base golden batch,
can customize secondary/auxiliary batch depending on Gen and can be carried
in the driver with no dependencies.
This patch adds support for this auxiliary batch which is inserted at the
end of golden batch and is completely independent from it. Thanks to Mika
for the preliminary review.
v2: Strictly conform to the batch size requirements to cover Gen2 and
add comments to clarify overflow check in macro (Chris, Mika).
v3: aux_batch_offset was declared as u64, change it to u32 (Chris)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Armin Reese <armin.c.reese@intel.com>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Mika Kuoppala [Fri, 17 Jul 2015 16:08:51 +0000 (17:08 +0100)]
drm/i915: Do kunmap if renderstate parsing fails
Kunmap the renderstate page on error path.
Reviewed-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Dave Gordon [Thu, 9 Jul 2015 18:29:04 +0000 (19:29 +0100)]
drm/i915: Add GuC-related header files
intel_guc_fwif.h contains the subset of the GuC interface that we
will need for submission of commands through the GuC. These MUST
be kept in sync with the definitions used by the GuC firmware, and
updates to this file will (or should) be autogenerated from the
source files used to build the firmware. Editing this file is
therefore not recommended.
i915_guc_reg.h contains definitions of GuC-related hardware:
registers, bitmasks, etc. These should match the BSpec.
v2:
Files renamed & resliced per review comments by Chris Wilson
v4:
Added DON'T-EDIT-ME warning [Tom O'Rourke]
Issue: VIZ-4884
Signed-off-by: Alex Dai <yu.dai@intel.com>
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Tom O'Rourke <Tom.O'Rourke@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Alex Dai [Thu, 9 Jul 2015 18:29:03 +0000 (19:29 +0100)]
drm/i915: Add GuC-related module parameters
Two new module parameters: "enable_guc_submission" which will turn
on submission of batchbuffers via the GuC (when implemented), and
"guc_log_level" which controls the level of debugging logged by the
GuC and captured by the host.
Signed-off-by: Alex Dai <yu.dai@intel.com>
v4:
Mark "enable_guc_submission" unsafe [Daniel Vetter]
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Tom O'Rourke <Tom.O'Rourke@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Dave Gordon [Thu, 9 Jul 2015 18:29:02 +0000 (19:29 +0100)]
drm/i915: Add i915_gem_object_create_from_data()
i915_gem_object_create_from_data() is a generic function to save data
from a plain linear buffer in a new pageable gem object that can later
be accessed by the CPU and/or GPU.
We will need this for the microcontroller firmware loading support code.
Derived from i915_gem_object_write(), originally by Alex Dai
v2:
Change of function: now allocates & fills a new object, rather than
writing to an existing object
New name courtesy of Chris Wilson
Explicit domain-setting and other improvements per review comments
by Chris Wilson & Daniel Vetter
v4:
Rebased
Issue: VIZ-4884
Signed-off-by: Alex Dai <yu.dai@intel.com>
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Tom O'Rourke <Tom.O'Rourke@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Mon, 20 Jul 2015 08:58:21 +0000 (10:58 +0200)]
Partially revert "drm/i915: s/mdelay/msleep/" in ilk rps code
This reverts commit
6adfb1ef106bfe4b5ecb8bd75c4d037741d28a48.
Ironlake RPS code runs under an irqsave spinlock and hence sleeping
isn't allowed. Not a this long delay while blocking irqs isn't great
at all, but fixing the locking scheme is a lot more involved.
So just revert for now.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reported-by: kernel test robot <ying.huang@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Daniel Vetter [Fri, 17 Jul 2015 20:24:32 +0000 (22:24 +0200)]
drm/i915: Update DRIVER_DATE to
20150717
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Damien Lespiau [Thu, 16 Jul 2015 16:08:09 +0000 (17:08 +0100)]
drm/i915/skl: Drop the preliminary_hw_support flag
Time to light a candle and remove the preliminary_hw_support flag.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Damien Lespiau [Thu, 16 Jul 2015 16:08:08 +0000 (17:08 +0100)]
drm/i915/skl: Don't expose the top most plane on gen9 display
on SKL/BXT, the top most plane hardware is shared between the legacy
cursor registers and an actual plane. Daniel and Ville don't want to
expose 2 DRM planes and would rather expose a CURSOR plane that has all
the usual plane properties, and that's a blocker for lifting the
prelimary_hw_support flag.
Unfortunately noone has had the time to finish this yet, but lifting the
prelimary_hw_support flag is long overdue. As an intermediate solution
we can merely not expose the top most plane
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Mika Kuoppala [Thu, 16 Jul 2015 16:36:51 +0000 (19:36 +0300)]
drm/i915: Fix divide by zero on watermark update
Fix divide by zero if we end up updating the watermarks
with zero dotclock.
This is a stop gap measure to allow module load in cases
where our state keeping fails.
v2: WARN_ON added (Paulo)
Cc: Paulo Zanoni <przanoni@gmail.com>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 15 Jul 2015 12:15:52 +0000 (14:15 +0200)]
drm/i915: Invert fastboot check
Fastboot should only downgrade a modeset if we have a match, not be
used to upgrade to a full modeset. Otherwise we can only use it in a
very restricted way: Initial modeset when the request mode is the
preferred one of the panel and there's still a pfit active. And that
only works because our mode_from_pipe_config fills in the wrong mode
(it takes the adjusted mode, not the requested one).
But we want fast modesets everywhere even after boot-up (especially
for testing, but not only there). Hence we need to be able to make any
modeset a fast one, which means we need to invert the logic and
optionally downgrade a modeset.
Note that this needs ->connector_changed split out from ->mode_changed
otherwise it's not going to work (because we might loose a modeset
because connectors changed but otherwise the config matches). As soon
as that's merged we can drop the i915.fastboot check from this code.
Also make sure that we don't accidentally clear any_ms and that we add
the planes for any kind of modeset.
Finally rename fastboot to fastset (yeah it's a silly name) since this
really isn't about booting all that much.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 15 Jul 2015 12:15:51 +0000 (14:15 +0200)]
drm/i915: Clarify logic for initial modeset
Currently we both set mode->private_flags to some value and also use
the pipe_config quirk. But since the pipe_config quirk isn't tied to
the lifetime of the mode object we need to check both.
Simplify this by only using mode.private_flags and stop using the
INHERITED_MODE quirk. Also for clarity add an explicit #define for
that driver priavete mode flag.
By using crtc_state->mode_changed we can also remove the recalc local
variable.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 15 Jul 2015 12:15:50 +0000 (14:15 +0200)]
drm/i915: Unconditionally check gmch pfit state
Now that we recompute the pipe config for all CRTCs that have changed
we don't have problems with stale configuration data for the global
pfit and can remove this hack. Yay!
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 15 Jul 2015 14:36:50 +0000 (16:36 +0200)]
Merge tag 'drm-intel-fixes-2015-07-15' into drm-intel-next-queued
Backmerge fixes since it's getting out of hand again with the massive
split due to atomic between -next and 4.2-rc. All the bugfixes in
4.2-rc are addressed already (by converting more towards atomic
instead of minimal duct-tape) so just always pick the version in next
for the conflicts in modeset code.
All the other conflicts are just adjacent lines changed.
Conflicts:
drivers/gpu/drm/i915/i915_drv.h
drivers/gpu/drm/i915/i915_gem_gtt.c
drivers/gpu/drm/i915/intel_display.c
drivers/gpu/drm/i915/intel_drv.h
drivers/gpu/drm/i915/intel_ringbuffer.h
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Maarten Lankhorst [Mon, 13 Jul 2015 14:30:32 +0000 (16:30 +0200)]
drm/i915: always disable irqs in intel_pipe_update_start
This can only fail because of a bug in the code.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[danvet: Squash in follow-up to also remove start_vbl_count from
intel_crtc->atomic and put it into the intel_crtc directly - it's not
precomputed state.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Maarten Lankhorst [Mon, 13 Jul 2015 14:30:33 +0000 (16:30 +0200)]
drm/i915: Remove use of runtime pm in atomic commit functions
We needed this originally for updating pagetables in plane commit
functions. But that's extracted into prepare/cleanup now. The other
issue was running updates when the pipe was off. That's also now
fixed.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Maarten Lankhorst [Mon, 13 Jul 2015 14:30:31 +0000 (16:30 +0200)]
drm/i915: Call plane update functions directly from intel_atomic_commit.
Now that there's only a single path for all atomic updates we can call
intel_(pre/post)_plane_update from intel_atomic_commit directly. This
makes the intention more clear.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Maarten Lankhorst [Mon, 13 Jul 2015 14:30:30 +0000 (16:30 +0200)]
drm/i915: Use full atomic modeset.
Huzzah! \o/
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Arun Siluvery [Tue, 14 Jul 2015 14:01:30 +0000 (15:01 +0100)]
drm/i915/gen9: Add WaSetDisablePixMaskCammingAndRhwoInCommonSliceChicken
In Indirect context w/a batch buffer,
+WaSetDisablePixMaskCammingAndRhwoInCommonSliceChicken
v2: SKL revision id was used for BXT, copy paste error found during
internal review (Bob Beckett).
v3: explain why part of the WA is in Per ctx batch (Mika)
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Arun Siluvery [Tue, 14 Jul 2015 14:01:29 +0000 (15:01 +0100)]
drm/i915/gen9: Add WaFlushCoherentL3CacheLinesAtContextSwitch workaround
In Indirect context w/a batch buffer,
+WaFlushCoherentL3CacheLinesAtContextSwitch:skl,bxt
v2: address static checker warning where unsigned value was checked for
less than zero which is never true (Dan Carpenter).
v3: The WA uses default value of GEN8_L3SQCREG4 during flush but that disables
some other WA; update default value to retain it and document dependency (Mika).
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Arun Siluvery [Tue, 14 Jul 2015 14:01:28 +0000 (15:01 +0100)]
drm/i915/gen9: Add WaDisableCtxRestoreArbitration workaround
In Indirect and Per context w/a batch buffer,
+WaDisableCtxRestoreArbitration
v2: SKL revision id was used for BXT, copy paste error found during
internal review (Bob Beckett).
v3: use updated macro.
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Robert Beckett <robert.beckett@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Arun Siluvery [Tue, 14 Jul 2015 14:01:27 +0000 (15:01 +0100)]
drm/i915: Enable WA batch buffers for Gen9
This patch only enables support for Gen9, the actual WA will be
initialized in subsequent patches.
The WARN that we use to warn user if WA batch support is not available
for a particular Gen is replaced with DRM_ERROR as warning here doesn't
really add much value.
v2: include all infrastructure bits in this patch so that subsequent
changes only correspond the WA added (Chris)
v3: use updated macro.
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Nick Hoath [Tue, 14 Jul 2015 13:41:15 +0000 (14:41 +0100)]
drm/i915/gen9: Implement WaDisableKillLogic for gen 9
v2: Patch leakage fixed
Signed-off-by: Nick Hoath <nicholas.hoath@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Tue, 14 Jul 2015 16:07:30 +0000 (18:07 +0200)]
drm/i915: Use expcitly fixed type in compat32 structs
I was confused shortly whether the compat was needed for the int,
until I noticed the pointer in the original.
Also remove typedef.
v2: Review from Chris.
- Add comments.
- Also change the int param in the original structure.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Maarten Lankhorst [Mon, 13 Jul 2015 09:55:05 +0000 (11:55 +0200)]
drm/i915: Fix noatomic crtc disabling, v2.
This fixes the breakage caused by
commit
eddfcbcdc27fbecb33bff098967bbdd7ca75bfa6
Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Date: Mon Jun 15 12:33:53 2015 +0200
drm/i915: Update less state during modeset.
No need to repeatedly call update_watermarks, or update_fbc.
Down to a single call to update_watermarks in .crtc_enable
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Tested-by(IVB): Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add missing shared dpll disable to the noatomic disable function.
This function will be replaced by its atomic counterpart soon.
Changes since v1:
- intel_crtc->active and watermarks are fixed by a patch from
Patrik Jakobsson
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Maarten Lankhorst [Tue, 14 Jul 2015 12:12:02 +0000 (14:12 +0200)]
drm/i915: fill in more mode members
Fill in driver type, hsync, vrefresh and name.
Those members are not read out but can be calculated from the mode.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Akash Goel [Mon, 29 Jun 2015 09:20:24 +0000 (14:50 +0530)]
drm/i915: Added BXT check in HAS_CORE_RING_FREQ macro
Updated the HAS_CORE_RING_FREQ macro to add the broxton check,
so as to disallow the programming & read of ring frequency
table for it.
Issue: VIZ-5144
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Akash Goel [Mon, 29 Jun 2015 09:20:23 +0000 (14:50 +0530)]
drm/i915: Add HAS_CORE_RING_FREQ macro
Added a new HAS_CORE_RING_FREQ macro, currently used in
gen6_update_ring_freq & i915_ring_freq_table debugfs function.
The programming & read of ring frequency table is needed for newer
GEN(>=6) platforms, except VLV/CHV.
Issue: VIZ-5144
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Maarten Lankhorst [Mon, 13 Jul 2015 14:30:29 +0000 (16:30 +0200)]
drm/i915: Make intel_display_suspend atomic, try 2.
Calculate all state using a normal transition, but afterwards fudge
crtc->state->active back to its old value. This should still allow
state restore in setup_hw_state to work properly.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Maarten Lankhorst [Tue, 14 Jul 2015 14:19:12 +0000 (16:19 +0200)]
drm/i915: Always force a modeset in intel_crtc_restore_mode, v2.
And get rid of things that are no longer true. This function is only
used for forcing a modeset when encoder properties are changed.
Because this is not yet done atomically, assume a full modeset is
needed and force a modeset on the crtc.
Changes since v1:
- s/reset/force modeset/
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Maarten Lankhorst [Mon, 13 Jul 2015 14:30:27 +0000 (16:30 +0200)]
drm/i915: Update power domains on readout.
This allows us to get rid of the set_init_power in
modeset_update_crtc_domains. The state should be sanitized enough
after setup_hw_state to not need the init power.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Maarten Lankhorst [Mon, 13 Jul 2015 14:30:26 +0000 (16:30 +0200)]
drm/i915: Get rid of unused transitional members.
The previous commit converted hw readout to atomic, all the new_*
members were used for restoring the old state, but with the
conversion of suspend to atomic there's no use left for them.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Maarten Lankhorst [Mon, 13 Jul 2015 14:30:25 +0000 (16:30 +0200)]
drm/i915: Convert resume to atomic.
Instead of all the ad-hoc updating, duplicate the old state first
before reading out the hw state, then restore it.
intel_display_resume is a new function that duplicates the sw state,
then reads out the hw state, and commits the old state.
intel_display_setup_hw_state now only reads out the atomic state.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90396
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Maarten Lankhorst [Tue, 14 Jul 2015 13:58:28 +0000 (15:58 +0200)]
drm/i915: Readout initial hw mode.
drm/i915: Readout initial hw mode, v2.
Atomic requires a mode blob when crtc_state->enable is true, or
you get a huge warn_on.
With a few tweaks the mode we read out from hardware could be used
as the real mode without a modeset, but this requires too much
testing, so for now force a modeset the first time the mode blob's
updated.
This preserves the old behavior, because previously we never set
the initial mode, which always meant that a modeset happened
when the mode was first set.
Changes since v1:
- Add a description in intel_modeset_readout_hw_state of how the
recalculation is done.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Maarten Lankhorst [Tue, 14 Jul 2015 11:46:40 +0000 (13:46 +0200)]
drm/i915: Calculate vblank timestamping constants before enabling vblank.
This is required to properly initialize vblanks on the active crtc.
Without it drm_calc_vbltimestamp_from_scanoutpos can fail with
crtc 0: Noop due to uninitialized mode.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Maarten Lankhorst [Tue, 14 Jul 2015 11:45:32 +0000 (13:45 +0200)]
drm/i915: Zero the mode in intel_sanitize_crtc when force disabling.
There is a WARN_ON in drm_atomic_crtc_check for this when exposing the atomic property.
If the mode_blob still exists, but enable = false then all updates are rejected with -EINVAL.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Maarten Lankhorst [Tue, 14 Jul 2015 11:42:49 +0000 (13:42 +0200)]
drm/i915: Fix reference leak in intel_modeset_readout_hw_state.
Unreference the old mode_blob by calling the crtc_destroy_state
helper before zeroing the crtc_state.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Maarten Lankhorst [Mon, 13 Jul 2015 14:30:20 +0000 (16:30 +0200)]
drm/i915: Rework plane readout.
All non-primary planes get disabled during hw readout,
this reduces complexity and means not having to do some plane
visibility checks during the first commit.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Peter Antoine [Fri, 10 Jul 2015 17:13:11 +0000 (20:13 +0300)]
drm/i915: Added Programming of the MOCS
This change adds the programming of the MOCS registers to the gen 9+
platforms. The set of MOCS configuration entries introduced by this
patch is intended to be minimal but sufficient to cover the needs of
current userspace - i.e. a good set of defaults. It is expected to be
extended in the future to provide further default values or to allow
userspace to redefine its private MOCS tables based on its demand for
additional caching configurations. In this setup, userspace should
only utilize the first N entries, higher entries are reserved for
future use.
It creates a fixed register set that is programmed across the different
engines so that all engines have the same table. This is done as the
main RCS context only holds the registers for itself and the shared
L3 values. By trying to keep the registers consistent across the
different engines it should make the programming for the registers
consistent.
v2:
-'static const' for private data structures and style changes.(Matt Turner)
v3:
- Make the tables "slightly" more readable. (Damien Lespiau)
- Updated tables fix performance regression.
v4:
- Code formatting. (Chris Wilson)
- re-privatised mocs code. (Daniel Vetter)
v5:
- Changed the name of a function. (Chris Wilson)
v6:
- re-based
- Added Mesa table entry (skylake & broxton) (Francisco Jerez)
- Tidied up the readability defines (Francisco Jerez)
- NUMBER of entries defines wrong. (Jim Bish)
- Added comments to clear up the meaning of the tables (Jim Bish)
Signed-off-by: Peter Antoine <peter.antoine@intel.com>
v7 (Francisco Jerez):
- Don't write L3-specific MOCS_ESC/SCC values into the e/LLC control
tables. Prefix L3-specific defines consistently with L3_ and
e/LLC-specific defines with LE_ to avoid this kind of confusion in
the future.
- Change L3CC WT define back to RESERVED (matches my hardware
documentation and the original patch, probably a misunderstanding
of my own previous comment).
- Drop Android tables, define new minimal tables more suitable for the
open source stack.
- Add comment that the MOCS tables are part of the kernel ABI.
- Move intel_logical_ring_begin() and _advance() calls one level down
(Chris Wilson).
- Minor formatting and style fixes.
v8 (Francisco Jerez):
- Add table size sanity check to emit_mocs_control/l3cc_table() (Chris
Wilson).
- Add comment about undefined entries being implicitly set to uncached
for forwards compatibility.
v9 (Francisco Jerez):
- Minor style fixes.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Acked-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Tue, 14 Jul 2015 08:59:30 +0000 (10:59 +0200)]
drm/i915: Remove unused compat32 code
Totatlly forgotten that we have these when nuking all the UMS code.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Maarten Lankhorst [Tue, 14 Jul 2015 10:33:29 +0000 (12:33 +0200)]
drm/i915: Remove plane_config from struct intel_crtc, v2.
Nothing depends on this outside initial hw readout, so keep this
struct on the stack instead.
Changes since v1:
- Remove unrelated changes.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Maarten Lankhorst [Mon, 13 Jul 2015 14:30:18 +0000 (16:30 +0200)]
drm/i915: Update missing properties in find_initial_plane_obj
The src and crtc rectangles were never set, resulting in the primary
plane being made invisible on first atomic update.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Maarten Lankhorst [Tue, 14 Jul 2015 10:17:40 +0000 (12:17 +0200)]
drm/i915: Allow fuzzy matching in pipe_config_compare, v2.
Instead of doing ad-hoc checks we already have a way of checking
if the state is compatible or not. Use this to force a modeset.
Only during modesets, or with PIPE_CONFIG_QUIRK_INHERITED_MODE
we should check if a full modeset is really needed.
Fastboot will allow the adjust parameter to ignore some stuff
too, and it will fix up differences in state that are ignored
by the compare function.
Changes since v1:
- Increase the value of the lowest m/n to prevent truncation.
- Dump pipe config when fastboot's used, without a modeset.
- Add adjust parameter to intel_compare_link_m_n, which is
used to adjust m2_n2 if it's a multiple of m_n.
- Add exact parameter intel_compare_m_n.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Maarten Lankhorst [Mon, 13 Jul 2015 14:30:16 +0000 (16:30 +0200)]
drm/i915: Do not use plane_config in intel_fbdev.c
Use the atomic state instead, this allows removing plane_config
from the crtc after the full hw readout is completed.
The size can be found in the fb, no need for the plane_config.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Maarten Lankhorst [Mon, 13 Jul 2015 14:30:15 +0000 (16:30 +0200)]
drm/i915: Do not update pfit state when toggling crtc enabled.
There's not much point for calculating the changes for the old
state. Instead just disable all scalers when disabling. It's
probably good enough to just disable the crtc_scaler, but just in
case there's a bug disable all scalers.
This means intel_atomic_setup_scalers is only called in the crtc
check function now, so all the transitional code can be removed.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Maarten Lankhorst [Mon, 13 Jul 2015 14:30:14 +0000 (16:30 +0200)]
drm/i915: Only update state on crtc's that are part of the atomic state.
This is probably hard to hit right now because in most cases all
atomic locks are taken, but after conversion to atomic this will make
it more likely to corrupt the crtc->config pointer, resulting in hard
to find bugs.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Maarten Lankhorst [Tue, 14 Jul 2015 11:00:39 +0000 (13:00 +0200)]
drm/i915: Do not call intel_crtc_disable if the crtc is already disabled.
When resuming with dpms off, the following warn can happen:
[ 118.334082] ------------[ cut here ]------------
[ 118.334105] WARNING: CPU: 2 PID: 2274 at drivers/gpu/drm/i915/intel_display.c:6319 __intel_set_mode+0xae5/0xb90 [i915]()
[ 118.334106] WARN_ON(!crtc->state->enable)
[ 118.334137] Modules linked in: i915
[ 118.334139] CPU: 2 PID: 2274 Comm: kworker/u16:117 Not tainted 4.2.0-rc2-fixes+ #4148
[ 118.334140] Hardware name: LENOVO 2349AV8/2349AV8, BIOS G1ETA5WW (2.65 ) 04/15/2014
[ 118.334144] Workqueue: events_unbound async_run_entry_fn
[ 118.334147]
ffffffffc017eef0 ffff8800ada93998 ffffffff817aa62a 0000000080000001
[ 118.334149]
ffff8800ada939e8 ffff8800ada939d8 ffffffff810807e1 ffff8800ada939c8
[ 118.334151]
ffff8800cea3b3d8 0000000000000000 ffff8800ad86b008 ffff880117705668
[ 118.334151] Call Trace:
[ 118.334155] [<
ffffffff817aa62a>] dump_stack+0x4f/0x7b
[ 118.334157] [<
ffffffff810807e1>] warn_slowpath_common+0x81/0xc0
[ 118.334158] [<
ffffffff81080861>] warn_slowpath_fmt+0x41/0x50
[ 118.334173] [<
ffffffffc0120375>] __intel_set_mode+0xae5/0xb90 [i915]
[ 118.334188] [<
ffffffffc0121312>] ? intel_modeset_compute_config+0x52/0xb40 [i915]
[ 118.334191] [<
ffffffff8144de53>] ? drm_atomic_set_fb_for_plane+0x63/0x80
[ 118.334205] [<
ffffffffc01269d9>] intel_set_mode+0x29/0x60 [i915]
[ 118.334219] [<
ffffffffc012730a>] intel_crtc_restore_mode+0x13a/0x1f0 [i915]
[ 118.334232] [<
ffffffffc0101160>] ? gen6_write16+0x250/0x250 [i915]
[ 118.334246] [<
ffffffffc01283ec>] intel_modeset_setup_hw_state+0x89c/0xcd0 [i915]
[ 118.334248] [<
ffffffff8137d260>] ? pci_pm_thaw+0x90/0x90
[ 118.334255] [<
ffffffffc00ac11b>] i915_drm_resume+0xcb/0x160 [i915]
[ 118.334262] [<
ffffffffc00ac1d2>] i915_pm_resume+0x22/0x30 [i915]
[ 118.334263] [<
ffffffff8137d2c3>] pci_pm_resume+0x63/0xa0
[ 118.334266] [<
ffffffff81467550>] dpm_run_callback+0x70/0x420
[ 118.334267] [<
ffffffff81467cbd>] device_resume+0x9d/0x1c0
[ 118.334269] [<
ffffffff814673d0>] ? initcall_debug_start+0x60/0x60
[ 118.334270] [<
ffffffff81467dfc>] async_resume+0x1c/0x50
[ 118.334271] [<
ffffffff810a6a94>] async_run_entry_fn+0x34/0xd0
[ 118.334273] [<
ffffffff8109d4ad>] process_one_work+0x1dd/0x7e0
[ 118.334275] [<
ffffffff8109d41a>] ? process_one_work+0x14a/0x7e0
[ 118.334276] [<
ffffffff8109daf9>] worker_thread+0x49/0x450
[ 118.334278] [<
ffffffff8109dab0>] ? process_one_work+0x7e0/0x7e0
[ 118.334280] [<
ffffffff810a3cb9>] kthread+0xf9/0x110
[ 118.334282] [<
ffffffff810a3bc0>] ? insert_kthread_work+0x90/0x90
[ 118.334284] [<
ffffffff817b414f>] ret_from_fork+0x3f/0x70
[ 118.334286] [<
ffffffff810a3bc0>] ? insert_kthread_work+0x90/0x90
[ 118.334287] ---[ end trace
01f2cf6371b82d7a ]---
This warn is harmless, and can be fixed by not calling intel_crtc_disable when
the crtc is already disabled.
Reported-and-Tested-by: Jörg Otte <jrg.otte@gmail.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Tue, 14 Jul 2015 10:29:27 +0000 (12:29 +0200)]
Revert "drm/i915: Declare the swizzling unknown for L-shaped configurations"
This reverts commit
19ee835cdb0b5a8eb11a68f25a51b8039d564488.
It breaks existing old userspace which doesn't handle UNKNOWN
swizzling correct. Yes UNKNOWN was a thing back in 2009 and probably
still is on some other platforms, but it still pretty clearly broke
the testers machine. If we want this we need to extend the ioctl with
new paramters that only new userspace looks at.
Cc: Harald Arnesen <harald@skogtun.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: Harald Arnesen <harald@skogtun.org>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Akash Goel [Mon, 29 Jun 2015 09:20:21 +0000 (14:50 +0530)]
drm/i915/skl: Restrict the ring frequency table programming to SKL
Ring frequency table programming is not required on BXT. Added separate
checks to enable the programming only for SKL & skip for BXT.
v2: Removed the BXT check from gen6_update_ring_freq function
Issue: VIZ-5144
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi at intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tvrtko Ursulin [Mon, 13 Jul 2015 15:51:39 +0000 (16:51 +0100)]
drm/i915: Forward all core DRM ioctls to core compat handling
Previously only core DRM ioctls under the DRM_COMMAND_BASE were being
forwarded, but the drm.h header suggests (and reality confirms) ones
after (and including) DRM_COMMAND_END should be forwarded as well.
We need this to correctly forward the compat ioctl for the botched-up
addfb2.1 extension.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: stable@vger.kernel.org # 4.1+
[danvet: Explain why this is suddenly needed and add cc: stable.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Mon, 13 Jul 2015 06:22:22 +0000 (08:22 +0200)]
drm/i915: fix oops in primary_check_plane
On Sun, Jul 12, 2015 at 09:52:51AM -0700, Linus Torvalds wrote:
> On Sun, Jul 12, 2015 at 1:03 AM, Jörg Otte <jrg.otte@gmail.com> wrote:
> > BUG: unable to handle kernel NULL pointer dereference at
0000000000000009
> > IP: [<
ffffffffbd3447bb>] 0xffffffffbd3447bb
>
> Ugh. Please enable KALLSYMS to get sane symbols.
>
> But yes, "crtc_state->base.active" is at offset 9 from "crtc_state",
> so it's pretty clearly just that change frm
>
> - if (intel_crtc->active) {
> + if (crtc_state->base.active) {
>
> and "crtc_state" is NULL.
>
> And the code very much knows that crtc_state can be NULL, since it's
> initialized with
>
> crtc_state = state->base.state ?
> intel_atomic_get_crtc_state(state->base.state,
> intel_crtc) : NULL;
>
> Tssk. Daniel? Should I just revert that commit
dec4f799d0a4
> ("drm/i915: Use crtc_state->active in primary check_plane func") for
> now, or is there a better fix? Like just checking crtc_state for NULL?
Indeed embarrassing. I've missed that we still have 1 caller left that's
using the transitional helpers, and those don't fill out
plane_state->state backpointers to the global atomic update since there is
no global atomic update for transitional helpers. Below diff should fix
this - we need to preferentially check crts_state->active and if that's
not set intel_crtc->active should yield the right result for the one
remaining caller (it's in the crtc_disable paths).
This fixes a regression introduced in
commit
dec4f799d0a4c9edae20512fa60b0a36f3299ca2
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Tue Jul 7 11:15:47 2015 +0200
drm/i915: Use crtc_state->active in primary check_plane func
which was quickly reverted in
commit
01e2d0627a9a6edb24c37db45db5ecb31e9de808
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date: Sun Jul 12 15:00:20 2015 -0700
Revert "drm/i915: Use crtc_state->active in primary check_plane func"
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jörg Otte <jrg.otte@gmail.com>
Reported-and-tested-by: Jörg Otte <jrg.otte@gmail.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Imre Deak [Wed, 8 Jul 2015 16:18:59 +0000 (19:18 +0300)]
drm/i915: remove unused has_dma_mapping flag
After the previous patch this flag will check always clear, as it's
never set for shmem backed and userptr objects, so we can remove it.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Yeah this isn't really fixes but it's a nice cleanup to
clarify the code but not really worth the hassle of backmerging. So
just add to -fixes, we're still early in -rc.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Mon, 13 Jul 2015 07:23:19 +0000 (09:23 +0200)]
drm/i915: Fix missing return warning for !CONFIG_DEBUGFS
This broken code was introduced in
commit
aa7471d228eb6dfddd0d201ea9746d6a2020972a
Author: Jani Nikula <jani.nikula@intel.com>
Date: Wed Apr 1 11:15:21 2015 +0300
drm/i915: add i915 specific connector debugfs file for DPCD
v2: Drop hunk that accidentally crept in.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Cc: François Valenduc <francoisvalenduc@gmail.com>
Reported-by: François Valenduc <francoisvalenduc@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Imre Deak [Thu, 9 Jul 2015 09:59:05 +0000 (12:59 +0300)]
drm/i915: avoid leaking DMA mappings
We have 3 types of DMA mappings for GEM objects:
1. physically contiguous for stolen and for objects needing contiguous
memory
2. DMA-buf mappings imported via a DMA-buf attach operation
3. SG DMA mappings for shmem backed and userptr objects
For 1. and 2. the lifetime of the DMA mapping matches the lifetime of the
corresponding backing pages and so in practice we create/release the
mapping in the object's get_pages/put_pages callback.
For 3. the lifetime of the mapping matches that of any existing GPU binding
of the object, so we'll create the mapping when the object is bound to
the first vma and release the mapping when the object is unbound from its
last vma.
Since the object can be bound to multiple vmas, we can end up creating a
new DMA mapping in the 3. case even if the object already had one. This
is not allowed by the DMA API and can lead to leaked mapping data and
IOMMU memory space starvation in certain cases. For example HW IOMMU
drivers (intel_iommu) allocate a new range from their memory space
whenever a mapping is created, silently overriding a pre-existing
mapping.
Fix this by moving the creation/removal of DMA mappings to the object's
get_pages/put_pages callbacks. These callbacks already check for and do
an early return in case of any nested calls. This way objects of the 3.
case also become more like the other object types.
I noticed this issue by enabling DMA debugging, which got disabled after
a while due to its internal mapping tables getting full. It also reported
errors in connection to random other drivers that did a DMA mapping for
an address that was previously mapped by i915 but was never released.
Besides these diagnostic messages and the memory space starvation
problem for IOMMUs, I'm not aware of this causing a real issue.
The fix is based on a patch from Chris.
v2:
- move the DMA mapping create/remove calls to the get_pages/put_pages
callbacks instead of adding new callbacks for these (Chris)
v3:
- also fix the get_page cache logic on the userptr async path (Chris)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tomas Elf [Thu, 9 Jul 2015 14:30:57 +0000 (15:30 +0100)]
drm/i915: Snapshot seqno of most recently submitted request.
The hang checker needs to inspect whether or not the ring request list is empty
as well as if the given engine has reached or passed the most recently
submitted request. The problem with this is that the hang checker cannot grab
the struct_mutex, which is required in order to safely inspect requests since
requests might be deallocated during inspection. In the past we've had kernel
panics due to this very unsynchronized access in the hang checker.
One solution to this problem is to not inspect the requests directly since
we're only interested in the seqno of the most recently submitted request - not
the request itself. Instead the seqno of the most recently submitted request is
stored separately, which the hang checker then inspects, circumventing the
issue of synchronization from the hang checker entirely.
This fixes a regression introduced in
commit
44cdd6d219bc64f6810b8ed0023a4d4db9e0fe68
Author: John Harrison <John.C.Harrison@Intel.com>
Date: Mon Nov 24 18:49:40 2014 +0000
drm/i915: Convert 'ring_idle()' to use requests not seqnos
v2 (Chris Wilson):
- Pass current engine seqno to ring_idle() from i915_hangcheck_elapsed() rather
than compute it over again.
- Remove extra whitespace.
Issue: VIZ-5998
Signed-off-by: Tomas Elf <tomas.elf@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Add regressing commit citation provided by Chris.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Tue, 5 May 2015 08:17:29 +0000 (09:17 +0100)]
drm/i915: Store device pointer in contexts for late tracepoint usafe
[ 1572.417121] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 1572.421010] IP: [<
ffffffffa00b2514>] ftrace_raw_event_i915_context+0x5d/0x70 [i915]
[ 1572.424970] PGD
1766a3067 PUD
1767a2067 PMD 0
[ 1572.428892] Oops: 0000 [#1] SMP
[ 1572.432787] Modules linked in: ipv6 dm_mod iTCO_wdt iTCO_vendor_support snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_controller snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd soundcore serio_raw pcspkr lpc_ich i2c_i801 mfd_core battery ac acpi_cpufreq i915 button video drm_kms_helper drm
[ 1572.441720] CPU: 2 PID: 18853 Comm: kworker/u8:0 Not tainted 4.0.0_kcloud_3f0360_20150429+ #588
[ 1572.446298] Workqueue: i915 i915_gem_retire_work_handler [i915]
[ 1572.450876] task:
ffff880002f428f0 ti:
ffff880035724000 task.ti:
ffff880035724000
[ 1572.455557] RIP: 0010:[<
ffffffffa00b2514>] [<
ffffffffa00b2514>] ftrace_raw_event_i915_context+0x5d/0x70 [i915]
[ 1572.460423] RSP: 0018:
ffff880035727ce8 EFLAGS:
00010286
[ 1572.465262] RAX:
ffff880073f1643c RBX:
ffff880002da9058 RCX:
ffff880073e5db40
[ 1572.470179] RDX:
0000000000000000 RSI:
0000000000000000 RDI:
ffff880035727ce8
[ 1572.475107] RBP:
ffff88007bb11a00 R08:
0000000000000000 R09:
0000000000000000
[ 1572.480034] R10:
0000000000362200 R11:
0000000000000008 R12:
0000000000000000
[ 1572.484952] R13:
ffff880035727d78 R14:
ffff880002dc1c98 R15:
ffff880002dc1dc8
[ 1572.489886] FS:
0000000000000000(0000) GS:
ffff88017fd00000(0000) knlGS:
0000000000000000
[ 1572.494883] CS: 0010 DS: 0000 ES: 0000 CR0:
000000008005003b
[ 1572.499859] CR2:
0000000000000000 CR3:
000000017572a000 CR4:
00000000001006e0
[ 1572.504842] Stack:
[ 1572.509834]
ffff88017b0090c0 ffff880073f16438 ffff880002da9058 ffff880073f1643c
[ 1572.514904]
0000000000000246 ffff880100000000 ffff88007bb11a00 ffff880002ddeb10
[ 1572.519985]
ffff8801759f79c0 ffffffffa0092ff0 0000000000000000 ffff88007bb11a00
[ 1572.525049] Call Trace:
[ 1572.530093] [<
ffffffffa0092ff0>] ? i915_gem_context_free+0xa8/0xc1 [i915]
[ 1572.535227] [<
ffffffffa009b969>] ? i915_gem_request_free+0x4e/0x50 [i915]
[ 1572.540347] [<
ffffffffa00b5533>] ? intel_execlists_retire_requests+0x14c/0x159 [i915]
[ 1572.545500] [<
ffffffffa009d9ea>] ? i915_gem_retire_requests+0x9d/0xeb [i915]
[ 1572.550664] [<
ffffffffa009dd8c>] ? i915_gem_retire_work_handler+0x4c/0x61 [i915]
[ 1572.555825] [<
ffffffff8104ca7f>] ? process_one_work+0x1b2/0x31d
[ 1572.560951] [<
ffffffff8104d278>] ? worker_thread+0x24d/0x339
[ 1572.566033] [<
ffffffff8104d02b>] ? cancel_delayed_work_sync+0xa/0xa
[ 1572.571140] [<
ffffffff81050b25>] ? kthread+0xce/0xd6
[ 1572.576191] [<
ffffffff81050a57>] ? kthread_create_on_node+0x162/0x162
[ 1572.581228] [<
ffffffff8179b3c8>] ? ret_from_fork+0x58/0x90
[ 1572.586259] [<
ffffffff81050a57>] ? kthread_create_on_node+0x162/0x162
[ 1572.591318] Code: de 48 89 e7 e8 09 4d 00 e1 48 85 c0 74 27 48 89 68 10 48 8b 55 38 48 89 e7 48 89 50 18 48 8b 55 10 48 8b 12 48 8b 12 48 8b 52 38 <8b> 12 89 50 08 e8 95 4d 00 e1 48 83 c4 30 5b 5d 41 5c c3 41 55
[ 1572.596981] RIP [<
ffffffffa00b2514>] ftrace_raw_event_i915_context+0x5d/0x70 [i915]
[ 1572.602464] RSP <
ffff880035727ce8>
[ 1572.607911] CR2:
0000000000000000
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90112#c23
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Patrik Jakobsson [Wed, 8 Jul 2015 13:31:52 +0000 (15:31 +0200)]
drm/i915: Don't forget to mark crtc as inactive after disable
Watermark calculations depend on the intel_crtc->active flag to be set
properly. Suspend/resume is broken on SKL and we also get DDB mismatches
without this patch.
The regression was introduced in:
commit
eddfcbcdc27fbecb33bff098967bbdd7ca75bfa6
Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Date: Mon Jun 15 12:33:53 2015 +0200
drm/i915: Update less state during modeset.
No need to repeatedly call update_watermarks, or update_fbc.
Down to a single call to update_watermarks in .crtc_enable
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Tested-by(IVB): Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
v2: Don't touch disable_shared_dpll()
Signed-off-by: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91203
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Deepak S [Fri, 10 Jul 2015 13:01:40 +0000 (18:31 +0530)]
drm/i915: Update PM interrupts before updating the freq
Currently we update the freq before masking the interrupts, which can
allow new interrupts to occur before the frequency has changed. These
extra interrupts might waste some cpu cycles. This patch corrects
this by masking interrupts prior to updating the frequency.
Note from Chris:
"Well it won't waste CPU cycles as the interrupt is also masked by the
threshold limits, but there should be no harm at all in reordering the
patch so, and it does make a certain amount of sense."
Signed-off-by: Deepak S <deepak.s@intel.com>
Signed-off-by: Praveen Paneri <praveen.paneri@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Add note from Chris.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Thulasimani,Sivakumar [Fri, 10 Jul 2015 07:00:43 +0000 (12:30 +0530)]
drm/i915: storm detection documentation update
Update the hotplug documentation to explain that hotplug storm
is not expected for Display port panels and hence is not handled
in current code.
v2: update the statements as recommended by Daniel
Signed-off-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Mon, 6 Jul 2015 11:44:11 +0000 (14:44 +0300)]
drm/i915: Adjust BXT HDMI port clock limits
Since
commit
e62925567c7926e78bc8ca976cde5c28ea265a49
Author: Vandana Kannan <vandana.kannan@intel.com>
Date: Wed Jul 1 17:02:57 2015 +0530
drm/i915/bxt: BUNs related to port PLL
BXT DPLL can now generate frequencies in the 216-223 MHz range.
Adjust the HDMI port clock checks to account for the reduced range
of invalid frequencies.
Cc: Vandana Kannan <vandana.kannan@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Mon, 29 Jun 2015 12:25:51 +0000 (15:25 +0300)]
drm/i915: Refactor VLV display power well init/deinit
We do the exact same steps around the disp2d/pipe A power well
enable/disable on VLV and CHV. Refactor the shared code into
some helpers.
Note that this means we now call vlv_power_sequencer_reset() before
turning off the power well, whereas before we did it after. That
doesn't matter though since vlv_power_sequencer_reset() just resets
the power sequencer software tracking and doesn't touch the hardware
at all.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Mon, 29 Jun 2015 12:25:50 +0000 (15:25 +0300)]
drm/i915: Simplify CHV pipe A power well code
The pipe A power well is the "disp2d" well on CHV and pipe B and C wells
don't even exist. Thereforce we can remove the checks for pipe A vs.
others and just assume it's always pipe A.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Mon, 29 Jun 2015 12:25:49 +0000 (15:25 +0300)]
drm/i915: Apply OCD to VLV/CHV DPLL defines
Drop the spurious 'A' from the VLV/CHV ref clock enable define,
and add the "REF" to the VLV ref clock selection bit. Also
s/CLOCK/CLK/ for extra consistency.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Mon, 29 Jun 2015 12:25:48 +0000 (15:25 +0300)]
drm/i915: Keep GMCH DPLL VGA mode always disabled
We disable the DPLL VGA mode when enabling the DPLL, but we enaable it
again when disabling the DPLL. Having VGA mode enabled even in unused
DPLLs can cause problems for CHV, so it seems wiser to always keep it
disabled. And let's just do that on all GMCH platforms to keep things
as similar as possible between them.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Akash Goel [Mon, 29 Jun 2015 09:20:22 +0000 (14:50 +0530)]
drm/i915/skl: Updated the i915_ring_freq_table debugfs function
Updated the i915_ring_freq_table debugfs function to support the read
of ring frequency table, through Punit interface, for SKL also.
Issue: VIZ-5144
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Akash Goel [Mon, 29 Jun 2015 09:20:20 +0000 (14:50 +0530)]
drm/i915/skl: Ring frequency table programming changes
Ring frequency table programming changes for SKL. No need for a
floor on ring frequency, as the issue of performance impact with
ring running below DDR frequency, is believed to be fixed on SKL
v2: Removed the check for avoiding ring frequency programming for BXT (Rodrigo)
Issue: VIZ-5144
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Akash Goel [Mon, 29 Jun 2015 09:20:19 +0000 (14:50 +0530)]
drm/i915/skl: Retrieve the Rpe value from Pcode
Read the efficient frequency (aka RPe) value through the the mailbox
command (0x1A) from the pcode, as done on Haswell and Broadwell.
The turbo minimum frequency softlimit is not revised as per the
efficient frequency value.
v2: Replaced the conditional expression operator with 'if' statement (Tom)
v3: Corrected the derivation of efficient frequency & shifted the
GEN9_FREQ_SCALER multiplications downwards (Ville)
Issue: VIZ-5143
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Linus Torvalds [Sun, 12 Jul 2015 22:10:30 +0000 (15:10 -0700)]
Linux 4.2-rc2
Linus Torvalds [Sun, 12 Jul 2015 22:00:20 +0000 (15:00 -0700)]
Revert "drm/i915: Use crtc_state->active in primary check_plane func"
This reverts commit
dec4f799d0a4c9edae20512fa60b0a36f3299ca2.
Jörg Otte reports a NULL pointder dereference due to this commit, as
'crtc_state' very much can be NULL:
crtc_state = state->base.state ?
intel_atomic_get_crtc_state(state->base.state, intel_crtc) : NULL;
So the change to test 'crtc_state->base.active' cannot possibly be
correct as-is.
There may be some other minimal fix (like just checking crtc_state for
NULL), but I'm just reverting it now for the rc2 release, and people
like Daniel Vetter who actually know this code will figure out what the
right solution is in the longer term.
Reported-and-bisected-by: Jörg Otte <jrg.otte@gmail.com>
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
CC: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>