OSDN Git Service
hayeswang [Thu, 26 Jan 2017 01:38:33 +0000 (09:38 +0800)]
r8152: re-schedule napi for tx
Re-schedule napi after napi_complete() for tx, if it is necessay.
In r8152_poll(), if the tx is completed after tx_bottom() and before
napi_complete(), the scheduling of napi would be lost. Then, no
one handles the next tx until the next napi_schedule() is called.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
hayeswang [Thu, 26 Jan 2017 01:38:32 +0000 (09:38 +0800)]
r8152: avoid start_xmit to schedule napi when napi is disabled
Stop the tx when the napi is disabled to prevent napi_schedule() is
called.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
hayeswang [Thu, 26 Jan 2017 01:38:31 +0000 (09:38 +0800)]
r8152: avoid start_xmit to call napi_schedule during autosuspend
Adjust the setting of the flag of SELECTIVE_SUSPEND to prevent start_xmit()
from calling napi_schedule() directly during runtime suspend.
After calling napi_disable() or clearing the flag of WORK_ENABLE,
scheduling the napi is useless.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Wed, 25 Jan 2017 17:10:41 +0000 (09:10 -0800)]
net: dsa: Bring back device detaching in dsa_slave_suspend()
Commit
448b4482c671 ("net: dsa: Add lockdep class to tx queues to avoid
lockdep splat") removed the netif_device_detach() call done in
dsa_slave_suspend() which is necessary, and paired with a corresponding
netif_device_attach(), bring it back.
Fixes:
448b4482c671 ("net: dsa: Add lockdep class to tx queues to avoid lockdep splat")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 25 Jan 2017 19:40:25 +0000 (14:40 -0500)]
Merge branch 'phy-truncated-led-names'
Geert Uytterhoeven says:
====================
net: phy: leds: Fix truncated LED trigger names and crashes
I started seeing crashes during s2ram and poweroff on all my ARM boards,
like:
Unable to handle kernel NULL pointer dereference at virtual address
00000000
...
[<
c04116d4>] (__list_del_entry_valid) from [<
c05e8948>] (led_trigger_unregister+0x34/0xcc)
[<
c05e8948>] (led_trigger_unregister) from [<
c05336c4>] (phy_led_triggers_unregister+0x28/0x34)
[<
c05336c4>] (phy_led_triggers_unregister) from [<
c0531d44>] (phy_detach+0x30/0x74)
[<
c0531d44>] (phy_detach) from [<
c0538bdc>] (sh_eth_close+0x64/0x9c)
[<
c0538bdc>] (sh_eth_close) from [<
c04d4ce0>] (dpm_run_callback+0x48/0xc8)
or:
list_del corruption. prev->next should be
dede6540, but was
2e323931
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:52!
...
[<
c02f6d70>] (__list_del_entry_valid) from [<
c0425168>] (led_trigger_unregister+0x34/0xcc)
[<
c0425168>] (led_trigger_unregister) from [<
c03a05a0>] (phy_led_triggers_unregister+0x28/0x34)
[<
c03a05a0>] (phy_led_triggers_unregister) from [<
c039ec04>] (phy_detach+0x30/0x74)
[<
c039ec04>] (phy_detach) from [<
c03a4fc0>] (sh_eth_close+0x6c/0xa4)
[<
c03a4fc0>] (sh_eth_close) from [<
c0483234>] (__dev_close_many+0xac/0xd0)
As the only clue was a kernel message like
sh-eth
ee700000.ethernet eth0: No phy led trigger registered for speed(100)
I had to bisected this, leading to commit
4567d686f5c6d955 ("phy:
increase size of MII_BUS_ID_SIZE and bus_id"). Reverting that commit
fixed the issue.
More investigation revealed the crashes are due to the combination of
two things:
- Truncated LED trigger names, leading to duplicate names, and
registration failures,
- Bad error handling in case of registration failures.
Both are fixed by this patch series.
Changes compared to v1:
- Add Reviewed-by,
- New patch "net: phy: leds: Break dependency of phy.h on
phy_led_triggers.h",
- Drop moving the include of <linux/phy_led_triggers.h>, as
<linux/phy.h> no longer includes it,
- #include <linux/phy.h> from <linux/phy_led_triggers.h>.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Geert Uytterhoeven [Wed, 25 Jan 2017 10:39:50 +0000 (11:39 +0100)]
net: phy: leds: Fix truncated LED trigger names
Commit
4567d686f5c6d955 ("phy: increase size of MII_BUS_ID_SIZE and
bus_id") increased the size of MII bus IDs, but forgot to update the
private definition in <linux/phy_led_triggers.h>.
This may cause:
1. Truncation of LED trigger names,
2. Duplicate LED trigger names,
3. Failures registering LED triggers,
4. Crashes due to bad error handling in the LED trigger failure path.
To fix this, and prevent the definitions going out of sync again in the
future, let the PHY LED trigger code use the existing MII_BUS_ID_SIZE
definition.
Example:
- Before I had triggers "
ee700000.etherne:01:100Mbps" and
"
ee700000.etherne:01:10Mbps",
- After the increase of MII_BUS_ID_SIZE, both became
"
ee700000.ethernet-
ffffffff:01:" => FAIL,
- Now, the triggers are "
ee700000.ethernet-
ffffffff:01:100Mbps" and
"
ee700000.ethernet-
ffffffff:01:10Mbps", which are unique again.
Fixes:
4567d686f5c6d955 ("phy: increase size of MII_BUS_ID_SIZE and bus_id")
Fixes:
2e0bc452f4721520 ("net: phy: leds: add support for led triggers on phy link state change")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geert Uytterhoeven [Wed, 25 Jan 2017 10:39:49 +0000 (11:39 +0100)]
net: phy: leds: Break dependency of phy.h on phy_led_triggers.h
<linux/phy.h> includes <linux/phy_led_triggers.h>, which is not really
needed. Drop the include from <linux/phy.h>, and add it to all users
that didn't include it explicitly.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geert Uytterhoeven [Wed, 25 Jan 2017 10:39:48 +0000 (11:39 +0100)]
net: phy: leds: Clear phy_num_led_triggers on failure to avoid crash
phy_attach_direct() ignores errors returned by
phy_led_triggers_register(). I think that's OK, as LED triggers can be
considered a non-critical feature.
However, this causes problems later:
- phy_led_trigger_change_speed() will access the array
phy_device.phy_led_triggers, which has been freed in the error path
of phy_led_triggers_register(), which may lead to a crash.
- phy_led_triggers_unregister() will access the same array, leading to
crashes during s2ram or poweroff, like:
Unable to handle kernel NULL pointer dereference at virtual address
00000000
...
[<
c04116d4>] (__list_del_entry_valid) from [<
c05e8948>] (led_trigger_unregister+0x34/0xcc)
[<
c05e8948>] (led_trigger_unregister) from [<
c05336c4>] (phy_led_triggers_unregister+0x28/0x34)
[<
c05336c4>] (phy_led_triggers_unregister) from [<
c0531d44>] (phy_detach+0x30/0x74)
[<
c0531d44>] (phy_detach) from [<
c0538bdc>] (sh_eth_close+0x64/0x9c)
[<
c0538bdc>] (sh_eth_close) from [<
c04d4ce0>] (dpm_run_callback+0x48/0xc8)
or:
list_del corruption. prev->next should be
dede6540, but was
2e323931
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:52!
...
[<
c02f6d70>] (__list_del_entry_valid) from [<
c0425168>] (led_trigger_unregister+0x34/0xcc)
[<
c0425168>] (led_trigger_unregister) from [<
c03a05a0>] (phy_led_triggers_unregister+0x28/0x34)
[<
c03a05a0>] (phy_led_triggers_unregister) from [<
c039ec04>] (phy_detach+0x30/0x74)
[<
c039ec04>] (phy_detach) from [<
c03a4fc0>] (sh_eth_close+0x6c/0xa4)
[<
c03a4fc0>] (sh_eth_close) from [<
c0483234>] (__dev_close_many+0xac/0xd0)
To fix this, clear phy_device.phy_num_led_triggers in the error path of
phy_led_triggers_register() fails.
Note that the "No phy led trigger registered for speed" message will
still be printed on link speed changes, which is a good cue that
something went wrong with the LED triggers.
Fixes:
2e0bc452f4721520 ("net: phy: leds: add support for led triggers on phy link state change")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
John Crispin [Wed, 25 Jan 2017 08:20:55 +0000 (09:20 +0100)]
net-next: ethernet: mediatek: change the compatible string
When the binding was defined, I was not aware that mt2701 was an earlier
version of the SoC. For sake of consistency, the ethernet driver should
use mt2701 inside the compat string as this is the earliest SoC with the
ethernet core.
The ethernet driver is currently of no real use until we finish and
upstream the DSA driver. There are no users of this binding yet. It should
be safe to fix this now before it is too late and we need to provide
backward compatibility for the mt7623-eth compat string.
Reported-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
John Crispin [Wed, 25 Jan 2017 08:20:54 +0000 (09:20 +0100)]
Documentation: devicetree: change the mediatek ethernet compatible string
When the binding was defined, I was not aware that mt2701 was an earlier
version of the SoC. For sake of consistency, the ethernet driver should
use mt2701 inside the compat string as this is the earliest SoC with the
ethernet core.
The ethernet driver is currently of no real use until we finish and
upstream the DSA driver. There are no users of this binding yet. It should
be safe to fix this now before it is too late and we need to provide
backward compatibility for the mt7623-eth compat string.
Reported-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: John Crispin <john@phrozen.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 25 Jan 2017 18:27:14 +0000 (13:27 -0500)]
Merge branch 'bnxt_en-rtnl-fixes'
Michael Chan says:
====================
bnxt_en: Fix RTNL lock usage in bnxt_sp_task().
There are 2 function calls from bnxt_sp_task() that have buggy RTNL
usage. These 2 functions take RTNL lock under some conditions, but
some callers (such as open, ethtool) have already taken RTNL. These
3 patches fix the issue by making it clear that callers must take
RTNL. If the caller is bnxt_sp_task() which does not automatically
take RTNL, we add a common scheme for bnxt_sp_task() to call these
functions properly under RTNL.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Wed, 25 Jan 2017 07:55:09 +0000 (02:55 -0500)]
bnxt_en: Fix RTNL lock usage on bnxt_get_port_module_status().
bnxt_get_port_module_status() calls bnxt_update_link() which expects
RTNL to be held. In bnxt_sp_task() that does not hold RTNL, we need to
call it with a prior call to bnxt_rtnl_lock_sp() and the call needs to
be moved to the end of bnxt_sp_task().
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Wed, 25 Jan 2017 07:55:08 +0000 (02:55 -0500)]
bnxt_en: Fix RTNL lock usage on bnxt_update_link().
bnxt_update_link() is called from multiple code paths. Most callers,
such as open, ethtool, already hold RTNL. Only the caller bnxt_sp_task()
does not. So it is a bug to take RTNL inside bnxt_update_link().
Fix it by removing the RTNL inside bnxt_update_link(). The function
now expects the caller to always hold RTNL.
In bnxt_sp_task(), call bnxt_rtnl_lock_sp() before calling
bnxt_update_link(). We also need to move the call to the end of
bnxt_sp_task() since it will be clearing the BNXT_STATE_IN_SP_TASK bit.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Wed, 25 Jan 2017 07:55:07 +0000 (02:55 -0500)]
bnxt_en: Fix bnxt_reset() in the slow path task.
In bnxt_sp_task(), we set a bit BNXT_STATE_IN_SP_TASK so that bnxt_close()
will synchronize and wait for bnxt_sp_task() to finish. Some functions
in bnxt_sp_task() require us to clear BNXT_STATE_IN_SP_TASK and then
acquire rtnl_lock() to prevent race conditions.
There are some bugs related to this logic. This patch refactors the code
to have common bnxt_rtnl_lock_sp() and bnxt_rtnl_unlock_sp() to handle
the RTNL and the clearing/setting of the bit. Multiple functions will
need the same logic. We also need to move bnxt_reset() to the end of
bnxt_sp_task(). Functions that clear BNXT_STATE_IN_SP_TASK must be the
last functions to be called in bnxt_sp_task(). The common scheme will
handle the condition properly.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Baron [Wed, 25 Jan 2017 02:49:41 +0000 (21:49 -0500)]
tcp: correct memory barrier usage in tcp_check_space()
sock_reset_flag() maps to __clear_bit() not the atomic version clear_bit().
Thus, we need smp_mb(), smp_mb__after_atomic() is not sufficient.
Fixes:
3c7151275c0c ("tcp: add memory barriers to write space paths")
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jason Baron <jbaron@akamai.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Tue, 24 Jan 2017 06:05:16 +0000 (14:05 +0800)]
sctp: sctp gso should set feature with NETIF_F_SG when calling skb_segment
Now sctp gso puts segments into skb's frag_list, then processes these
segments in skb_segment. But skb_segment handles them only when gs is
enabled, as it's in the same branch with skb's frags.
Although almost all the NICs support sg other than some old ones, but
since commit
1e16aa3ddf86 ("net: gso: use feature flag argument in all
protocol gso handlers"), features &= skb->dev->hw_enc_features, and
xfrm_output_gso call skb_segment with features = 0, which means sctp
gso would call skb_segment with sg = 0, and skb_segment would not work
as expected.
This patch is to fix it by setting features param with NETIF_F_SG when
calling skb_segment so that it can go the right branch to process the
skb's frag_list.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Tue, 24 Jan 2017 06:01:53 +0000 (14:01 +0800)]
sctp: sctp_addr_id2transport should verify the addr before looking up assoc
sctp_addr_id2transport is a function for sockopt to look up assoc by
address. As the address is from userspace, it can be a v4-mapped v6
address. But in sctp protocol stack, it always handles a v4-mapped
v6 address as a v4 address. So it's necessary to convert it to a v4
address before looking up assoc by address.
This patch is to fix it by calling sctp_verify_addr in which it can do
this conversion before calling sctp_endpoint_lookup_assoc, just like
what sctp_sendmsg and __sctp_connect do for the address from users.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 24 Jan 2017 21:21:37 +0000 (16:21 -0500)]
Merge branch 'lwt-module-unload'
Robert Shearman says:
====================
net: Fix oops on state free after lwt module unload
An oops is seen in lwtstate_free after an lwt ops module has been
unloaded. This patchset fixes this by preventing modules implementing
lwtunnel ops from being unloaded whilst there's state alive using
those ops. The first patch adds fills in a new owner field in all lwt
ops and the second patch makes use of this to reference count the
modules as state is built and destroyed using them.
Changes in v3:
- don't put module reference if try_module_get fails on building state
Changes in v2:
- specify module owner for all modules as suggested by DaveM
- reference count all modules building lwt state, not just those ops
implementing destroy_state, as also suggested by DaveM.
- rebased on top of David Ahern's lwtunnel changes
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Robert Shearman [Tue, 24 Jan 2017 16:26:48 +0000 (16:26 +0000)]
lwtunnel: Fix oops on state free after encap module unload
When attempting to free lwtunnel state after the module for the encap
has been unloaded an oops occurs:
BUG: unable to handle kernel NULL pointer dereference at
0000000000000008
IP: lwtstate_free+0x18/0x40
[..]
task:
ffff88003e372380 task.stack:
ffffc900001fc000
RIP: 0010:lwtstate_free+0x18/0x40
RSP: 0018:
ffff88003fd83e88 EFLAGS:
00010246
RAX:
0000000000000000 RBX:
ffff88002bbb3380 RCX:
ffff88000c91a300
[..]
Call Trace:
<IRQ>
free_fib_info_rcu+0x195/0x1a0
? rt_fibinfo_free+0x50/0x50
rcu_process_callbacks+0x2d3/0x850
? rcu_process_callbacks+0x296/0x850
__do_softirq+0xe4/0x4cb
irq_exit+0xb0/0xc0
smp_apic_timer_interrupt+0x3d/0x50
apic_timer_interrupt+0x93/0xa0
[..]
Code: e8 6e c6 fc ff 89 d8 5b 5d c3 bb de ff ff ff eb f4 66 90 66 66 66 66 90 55 48 89 e5 53 0f b7 07 48 89 fb 48 8b 04 c5 00 81 d5 81 <48> 8b 40 08 48 85 c0 74 13 ff d0 48 8d 7b 20 be 20 00 00 00 e8
The problem is after the module for the encap can be unloaded the
corresponding ops is removed and is thus NULL here.
Modules implementing lwtunnel ops should not be allowed to unload
while there is state alive using those ops, so grab the module
reference for the ops on creating lwtunnel state and of course release
the reference when freeing the state.
Fixes:
1104d9ba443a ("lwtunnel: Add destroy state operation")
Signed-off-by: Robert Shearman <rshearma@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Robert Shearman [Tue, 24 Jan 2017 16:26:47 +0000 (16:26 +0000)]
net: Specify the owning module for lwtunnel ops
Modules implementing lwtunnel ops should not be allowed to unload
while there is state alive using those ops, so specify the owning
module for all lwtunnel ops.
Signed-off-by: Robert Shearman <rshearma@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 24 Jan 2017 21:14:59 +0000 (16:14 -0500)]
Merge branch 'tipc-topology-fixes'
Parthasarathy Bhuvaragan says:
====================
tipc: topology server fixes for nametable soft lockup
In this series, we revert the commit
333f796235a527 ("tipc: fix a
race condition leading to subscriber refcnt bug") and provide an
alternate solution to fix the race conditions in commits 2-4.
We have to do this as the above commit introduced a nametbl soft
lockup at module exit as described by patch#4.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Parthasarathy Bhuvaragan [Tue, 24 Jan 2017 12:00:48 +0000 (13:00 +0100)]
tipc: fix cleanup at module unload
In tipc_server_stop(), we iterate over the connections with limiting
factor as server's idr_in_use. We ignore the fact that this variable
is decremented in tipc_close_conn(), leading to premature exit.
In this commit, we iterate until the we have no connections left.
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Tested-by: John Thompson <thompa.atl@gmail.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Parthasarathy Bhuvaragan [Tue, 24 Jan 2017 12:00:47 +0000 (13:00 +0100)]
tipc: ignore requests when the connection state is not CONNECTED
In tipc_conn_sendmsg(), we first queue the request to the outqueue
followed by the connection state check. If the connection is not
connected, we should not queue this message.
In this commit, we reject the messages if the connection state is
not CF_CONNECTED.
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Tested-by: John Thompson <thompa.atl@gmail.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Parthasarathy Bhuvaragan [Tue, 24 Jan 2017 12:00:46 +0000 (13:00 +0100)]
tipc: fix nametbl_lock soft lockup at module exit
Commit
333f796235a527 ("tipc: fix a race condition leading to
subscriber refcnt bug") reveals a soft lockup while acquiring
nametbl_lock.
Before commit
333f796235a527, we call tipc_conn_shutdown() from
tipc_close_conn() in the context of tipc_topsrv_stop(). In that
context, we are allowed to grab the nametbl_lock.
Commit
333f796235a527, moved tipc_conn_release (renamed from
tipc_conn_shutdown) to the connection refcount cleanup. This allows
either tipc_nametbl_withdraw() or tipc_topsrv_stop() to the cleanup.
Since tipc_exit_net() first calls tipc_topsrv_stop() and then
tipc_nametble_withdraw() increases the chances for the later to
perform the connection cleanup.
The soft lockup occurs in the call chain of tipc_nametbl_withdraw(),
when it performs the tipc_conn_kref_release() as it tries to grab
nametbl_lock again while holding it already.
tipc_nametbl_withdraw() grabs nametbl_lock
tipc_nametbl_remove_publ()
tipc_subscrp_report_overlap()
tipc_subscrp_send_event()
tipc_conn_sendmsg()
<< if (con->flags != CF_CONNECTED) we do conn_put(),
triggering the cleanup as refcount=0. >>
tipc_conn_kref_release
tipc_sock_release
tipc_conn_release
tipc_subscrb_delete
tipc_subscrp_delete
tipc_nametbl_unsubscribe << Soft Lockup >>
The previous changes in this series fixes the race conditions fixed
by commit
333f796235a527. Hence we can now revert the commit.
Fixes:
333f796235a52727 ("tipc: fix a race condition leading to subscriber refcnt bug")
Reported-and-Tested-by: John Thompson <thompa.atl@gmail.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Parthasarathy Bhuvaragan [Tue, 24 Jan 2017 12:00:45 +0000 (13:00 +0100)]
tipc: fix connection refcount error
Until now, the generic server framework maintains the connection
id's per subscriber in server's conn_idr. At tipc_close_conn, we
remove the connection id from the server list, but the connection is
valid until we call the refcount cleanup. Hence we have a window
where the server allocates the same connection to an new subscriber
leading to inconsistent reference count. We have another refcount
warning we grab the refcount in tipc_conn_lookup() for connections
with flag with CF_CONNECTED not set. This usually occurs at shutdown
when the we stop the topology server and withdraw TIPC_CFG_SRV
publication thereby triggering a withdraw message to subscribers.
In this commit, we:
1. remove the connection from the server list at recount cleanup.
2. grab the refcount for a connection only if CF_CONNECTED is set.
Tested-by: John Thompson <thompa.atl@gmail.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Parthasarathy Bhuvaragan [Tue, 24 Jan 2017 12:00:44 +0000 (13:00 +0100)]
tipc: add subscription refcount to avoid invalid delete
Until now, the subscribers keep track of the subscriptions using
reference count at subscriber level. At subscription cancel or
subscriber delete, we delete the subscription only if the timer
was pending for the subscription. This approach is incorrect as:
1. del_timer() is not SMP safe, if on CPU0 the check for pending
timer returns true but CPU1 might schedule the timer callback
thereby deleting the subscription. Thus when CPU0 is scheduled,
it deletes an invalid subscription.
2. We export tipc_subscrp_report_overlap(), which accesses the
subscription pointer multiple times. Meanwhile the subscription
timer can expire thereby freeing the subscription and we might
continue to access the subscription pointer leading to memory
violations.
In this commit, we introduce subscription refcount to avoid deleting
an invalid subscription.
Reported-and-Tested-by: John Thompson <thompa.atl@gmail.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Parthasarathy Bhuvaragan [Tue, 24 Jan 2017 12:00:43 +0000 (13:00 +0100)]
tipc: fix nametbl_lock soft lockup at node/link events
We trigger a soft lockup as we grab nametbl_lock twice if the node
has a pending node up/down or link up/down event while:
- we process an incoming named message in tipc_named_rcv() and
perform an tipc_update_nametbl().
- we have pending backlog items in the name distributor queue
during a nametable update using tipc_nametbl_publish() or
tipc_nametbl_withdraw().
The following are the call chain associated:
tipc_named_rcv() Grabs nametbl_lock
tipc_update_nametbl() (publish/withdraw)
tipc_node_subscribe()/unsubscribe()
tipc_node_write_unlock()
<< lockup occurs if an outstanding node/link event
exits, as we grabs nametbl_lock again >>
tipc_nametbl_withdraw() Grab nametbl_lock
tipc_named_process_backlog()
tipc_update_nametbl()
<< rest as above >>
The function tipc_node_write_unlock(), in addition to releasing the
lock processes the outstanding node/link up/down events. To do this,
we need to grab the nametbl_lock again leading to the lockup.
In this commit we fix the soft lockup by introducing a fast variant of
node_unlock(), where we just release the lock. We adapt the
node_subscribe()/node_unsubscribe() to use the fast variants.
Reported-and-Tested-by: John Thompson <thompa.atl@gmail.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 24 Jan 2017 20:27:59 +0000 (15:27 -0500)]
Merge branch 'alx-mq-fixes'
Tobias Regnery says:
====================
alx: fix fallout from multi queue conversion
Here are 3 fixes for the multi queue conversion in v4.10.
The first patch fixes a wrong condition in an if statement.
Patches 2 and 3 fixes regressions in the corner case when requesting msi-x
interrupts fails and we fall back to msi or legacy interrupts.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Regnery [Tue, 24 Jan 2017 13:34:24 +0000 (14:34 +0100)]
alx: work around hardware bug in interrupt fallback path
If requesting msi-x interrupts fails in alx_request_irq we fall back to
a single tx queue and msi or legacy interrupts.
Currently the adapter stops working in this case and we get tx watchdog
timeouts. For reasons unknown the adapter gets confused when we load the
dma adresses to the chip in alx_init_ring_ptrs twice: the first time with
multiple queues and the second time in the fallback case with a single
queue.
To fix this move the the call to alx_reinit_rings (which calls
alx_init_ring_ptrs) after alx_request_irq. At this time it is clear how
much tx queues we have and which dma addresses we use.
Fixes:
d768319cd427 ("alx: enable multiple tx queues")
Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Regnery [Tue, 24 Jan 2017 13:34:23 +0000 (14:34 +0100)]
alx: fix fallback to msi or legacy interrupts
If requesting msi-x interrupts fails we should fall back to msi or
legacy interrupts. However alx_realloc_ressources don't call
alx_init_intr, so we fail to set the right number of tx queues.
This results in watchdog timeouts and a nonfunctional adapter.
Fixes:
d768319cd427 ("alx: enable multiple tx queues")
Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Regnery [Tue, 24 Jan 2017 13:34:22 +0000 (14:34 +0100)]
alx: fix wrong condition to free descriptor memory
The condition to free the descriptor memory is wrong, we want to free the
memory if it is set and not if it is unset. Invert the test to fix this
issue.
Fixes:
b0999223f224b ("alx: add ability to allocate and free alx_napi structures")
Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bjørn Mork [Tue, 24 Jan 2017 09:45:38 +0000 (10:45 +0100)]
qmi_wwan/cdc_ether: add device ID for HP lt2523 (Novatel E371) WWAN card
Another rebranded Novatel E371. qmi_wwan should drive this device, while
cdc_ether should ignore it. Even though the USB descriptors are plain
CDC-ETHER that USB interface is a QMI interface. Ref commit
7fdb7846c9ca
("qmi_wwan/cdc_ether: add device IDs for Dell 5804 (Novatel E371) WWAN
card")
Cc: Dan Williams <dcbw@redhat.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Huth [Tue, 24 Jan 2017 06:28:41 +0000 (07:28 +0100)]
ibmveth: Add a proper check for the availability of the checksum features
When using the ibmveth driver in a KVM/QEMU based VM, it currently
always prints out a scary error message like this when it is started:
ibmveth
71000003 (unregistered net_device): unable to change
checksum offload settings. 1 rc=-2 ret_attr=
71000003
This happens because the driver always tries to enable the checksum
offloading without checking for the availability of this feature first.
QEMU does not support checksum offloading for the spapr-vlan device,
thus we always get the error message here.
According to the LoPAPR specification, the "ibm,illan-options" property
of the corresponding device tree node should be checked first to see
whether the H_ILLAN_ATTRIUBTES hypercall and thus the checksum offloading
feature is available. Thus let's do this in the ibmveth driver, too, so
that the error message is really only limited to cases where something
goes wrong, and does not occur if the feature is just missing.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 24 Jan 2017 20:01:58 +0000 (15:01 -0500)]
Merge branch 'vxlan-fdb-fixes'
Roopa Prabhu says:
====================
vxlan: misc fdb fixes
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Balakrishnan Raman [Tue, 24 Jan 2017 04:44:33 +0000 (20:44 -0800)]
vxlan: do not age static remote mac entries
Mac aging is applicable only for dynamically learnt remote mac
entries. Check for user configured static remote mac entries
and skip aging.
Signed-off-by: Balakrishnan Raman <ramanb@cumulusnetworks.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Roopa Prabhu [Tue, 24 Jan 2017 04:44:32 +0000 (20:44 -0800)]
vxlan: don't flush static fdb entries on admin down
This patch skips flushing static fdb entries in
ndo_stop, but flushes all fdb entries during vxlan
device delete. This is consistent with the bridge
driver fdb
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 24 Jan 2017 19:53:25 +0000 (14:53 -0500)]
Merge branch 'ip6_tnl_parse_tlv_enc_lim-fixes'
Eric Dumazet says:
====================
ipv6: fix ip6_tnl_parse_tlv_enc_lim() issues
First patch fixes ip6_tnl_parse_tlv_enc_lim() callers,
bug added in linux-3.7
Second patch fixes ip6_tnl_parse_tlv_enc_lim() itself,
bug predates linux-2.6.12
Based on a report from Dmitry Vyukov, thanks to KASAN.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 24 Jan 2017 00:43:06 +0000 (16:43 -0800)]
ipv6: fix ip6_tnl_parse_tlv_enc_lim()
This function suffers from multiple issues.
First one is that pskb_may_pull() may reallocate skb->head,
so the 'raw' pointer needs either to be reloaded or not used at all.
Second issue is that NEXTHDR_DEST handling does not validate
that the options are present in skb->data, so we might read
garbage or access non existent memory.
With help from Willem de Bruijn.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 24 Jan 2017 00:43:05 +0000 (16:43 -0800)]
ip6_tunnel: must reload ipv6h in ip6ip6_tnl_xmit()
Since ip6_tnl_parse_tlv_enc_lim() can call pskb_may_pull(),
we must reload any pointer that was related to skb->head
(or skb->data), or risk use after free.
Fixes:
c12b395a4664 ("gre: Support GRE over IPv6")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Dmitry Kozlov <xeb@mail.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael S. Tsirkin [Mon, 23 Jan 2017 19:37:52 +0000 (21:37 +0200)]
virtio_net: fix PAGE_SIZE > 64k
I don't have any guests with PAGE_SIZE > 64k but the
code seems to be clearly broken in that case
as PAGE_SIZE / MERGEABLE_BUFFER_ALIGN will need
more than 8 bit and so the code in mergeable_ctx_to_buf_address
does not give us the actual true size.
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Mon, 23 Jan 2017 19:17:35 +0000 (11:17 -0800)]
af_unix: move unix_mknod() out of bindlock
Dmitry reported a deadlock scenario:
unix_bind() path:
u->bindlock ==> sb_writer
do_splice() path:
sb_writer ==> pipe->mutex ==> u->bindlock
In the unix_bind() code path, unix_mknod() does not have to
be done with u->bindlock held, since it is a pure fs operation,
so we can just move unix_mknod() out.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Rainer Weikusat <rweikusat@mobileactivedefense.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Mon, 23 Jan 2017 10:11:42 +0000 (11:11 +0100)]
mlxsw: spectrum_router: Correctly reallocate adjacency entries
mlxsw_sp_nexthop_group_mac_update() is called in one of two cases:
1) When the MAC of a nexthop needs to be updated
2) When the size of a nexthop group has changed
In the second case the adjacency entries for the nexthop group need to
be reallocated from the adjacency table. In this case we must write to
the entries the MAC addresses of all the nexthops that should be
offloaded and not only those whose MAC changed. Otherwise, these entries
would be filled with garbage data, resulting in packet loss.
Fixes:
a7ff87acd995 ("mlxsw: spectrum_router: Implement next-hop routing")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
hayeswang [Mon, 23 Jan 2017 06:18:43 +0000 (14:18 +0800)]
r8152: don't execute runtime suspend if the tx is not empty
Runtime suspend shouldn't be executed if the tx queue is not empty,
because the device is not idle.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Martin Blumenstingl [Sun, 22 Jan 2017 16:41:32 +0000 (17:41 +0100)]
Documentation: net: phy: improve explanation when to specify the PHY ID
The old description basically read like "ethernet-phy-idAAAA.BBBB" can
be specified when you know the actual PHY ID. However, specifying this
has a side-effect: it forces Linux to bind to a certain PHY driver (the
one that matches the ID given in the compatible string), ignoring the ID
which is reported by the actual PHY.
Whenever a device is shipped with (multiple) different PHYs during it's
production lifetime then explicitly specifying
"ethernet-phy-idAAAA.BBBB" could break certain revisions of that device.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jingju Hou [Sun, 22 Jan 2017 10:20:56 +0000 (18:20 +0800)]
net: phy: marvell: Add Wake from LAN support for
88E1510 PHY
Signed-off-by: Jingju Hou <houjingj@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 24 Jan 2017 15:57:56 +0000 (10:57 -0500)]
Merge tag 'mac80211-for-davem-2017-01-24' of git://git./linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
A single fix, for a sleeping context problem found by LTP.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Mon, 23 Jan 2017 08:29:09 +0000 (09:29 +0100)]
mac80211: don't try to sleep in rate_control_rate_init()
In my previous patch, I missed that rate_control_rate_init() is
called from some places that cannot sleep, so it cannot call
ieee80211_recalc_min_chandef(). Remove that call for now to fix
the context bug, we'll have to find a different way to fix the
minimum channel width issue.
Fixes:
96aa2e7cf126 ("mac80211: calculate min channel width correctly")
Reported-by: Xiaolong Ye (via lkp-robot) <xiaolong.ye@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Florian Fainelli [Sat, 21 Jan 2017 00:05:05 +0000 (16:05 -0800)]
net: dsa: Check return value of phy_connect_direct()
We need to check the return value of phy_connect_direct() in
dsa_slave_phy_connect() otherwise we may be continuing the
initialization of a slave network device with a PHY that already
attached somewhere else and which will soon be in error because the PHY
device is in error.
The conditions for such an error to occur are that we have a port of our
switch that is not disabled, and has the same port number as a PHY
address (say both 5) that can be probed using the DSA slave MII bus. We
end-up having this slave network device find a PHY at the same address
as our port number, and we try to attach to it.
A slave network (e.g: port 0) has already attached to our PHY device,
and we try to re-attach it with a different network device, but since we
ignore the error we would end-up initializating incorrect device
references by the time the slave network interface is opened.
The code has been (re)organized several times, making it hard to provide
an exact Fixes tag, this is a bugfix nonetheless.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Fri, 20 Jan 2017 23:31:52 +0000 (15:31 -0800)]
net: phy: Avoid deadlock during phy_error()
phy_error() is called in the PHY state machine workqueue context, and
calls phy_trigger_machine() which does a cancel_delayed_work_sync() of
the workqueue we execute from, causing a deadlock situation.
Augment phy_trigger_machine() machine with a sync boolean indicating
whether we should use cancel_*_sync() or just cancel_*_work().
Fixes:
3c293f4e08b5 ("net: phy: Trigger state machine on state change and not polling.")
Reported-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Fri, 20 Jan 2017 20:58:34 +0000 (12:58 -0800)]
net: mpls: Fix multipath selection for LSR use case
MPLS multipath for LSR is broken -- always selecting the first nexthop
in the one label case. For example:
$ ip -f mpls ro ls
100
nexthop as to 200 via inet 172.16.2.2 dev virt12
nexthop as to 300 via inet 172.16.3.2 dev virt13
101
nexthop as to 201 via inet6 2000:2::2 dev virt12
nexthop as to 301 via inet6 2000:3::2 dev virt13
In this example incoming packets have a single MPLS labels which means
BOS bit is set. The BOS bit is passed from mpls_forward down to
mpls_multipath_hash which never processes the hash loop because BOS is 1.
Update mpls_multipath_hash to process the entire label stack. mpls_hdr_len
tracks the total mpls header length on each pass (on pass N mpls_hdr_len
is N * sizeof(mpls_shim_hdr)). When the label is found with the BOS set
it verifies the skb has sufficient header for ipv4 or ipv6, and find the
IPv4 and IPv6 header by using the last mpls_hdr pointer and adding 1 to
advance past it.
With these changes I have verified the code correctly sees the label,
BOS, IPv4 and IPv6 addresses in the network header and icmp/tcp/udp
traffic for ipv4 and ipv6 are distributed across the nexthops.
Fixes:
1c78efa8319ca ("mpls: flow-based multipath selection")
Acked-by: Robert Shearman <rshearma@brocade.com>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 22 Jan 2017 21:57:20 +0000 (16:57 -0500)]
Merge branch 'amd-xgbe-fixes'
Tom Lendacky says:
====================
amd-xgbe: AMD XGBE driver fixes 2017-01-20
This patch series addresses some issues in the AMD XGBE driver.
The following fixes are included in this driver update series:
- Add a fix for a version of the hardware that uses different register
offset values for a device with the same PCI device ID
- Add support to check the return code from the xgbe_init() function
This patch series is based on net.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Lendacky, Thomas [Fri, 20 Jan 2017 18:14:13 +0000 (12:14 -0600)]
amd-xgbe: Check xgbe_init() return code
The xgbe_init() routine returns a return code indicating success or
failure, but the return code is not checked. Add code to xgbe_init()
to issue a message when failures are seen and add code to check the
xgbe_init() return code.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lendacky, Thomas [Fri, 20 Jan 2017 18:14:03 +0000 (12:14 -0600)]
amd-xgbe: Add a hardware quirk for register definitions
A newer version of the hardware is using the same PCI ids for the network
device but has altered register definitions for determining the window
settings for the indirect PCS access. Add support to check for this
hardware and if found use the new register values.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Vecera [Fri, 20 Jan 2017 17:12:17 +0000 (18:12 +0100)]
bridge: netlink: call br_changelink() during br_dev_newlink()
Any bridge options specified during link creation (e.g. ip link add)
are ignored as br_dev_newlink() does not process them.
Use br_changelink() to do it.
Fixes:
133235161721 ("bridge: implement rtnl_link_ops->changelink")
Signed-off-by: Ivan Vecera <cera@cera.cz>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vineeth Remanan Pillai [Thu, 19 Jan 2017 16:35:39 +0000 (08:35 -0800)]
xen-netfront: Fix Rx stall during network stress and OOM
During an OOM scenario, request slots could not be created as skb
allocation fails. So the netback cannot pass in packets and netfront
wrongly assumes that there is no more work to be done and it disables
polling. This causes Rx to stall.
The issue is with the retry logic which schedules the timer if the
created slots are less than NET_RX_SLOTS_MIN. The count of new request
slots to be pushed are calculated as a difference between new req_prod
and rsp_cons which could be more than the actual slots, if there are
unconsumed responses.
The fix is to calculate the count of newly created slots as the
difference between new req_prod and old req_prod.
Signed-off-by: Vineeth Remanan Pillai <vineethp@amazon.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 19 Jan 2017 07:03:08 +0000 (23:03 -0800)]
net/mlx5e: Do not recycle pages from emergency reserve
A driver using dev_alloc_page() must not reuse a page allocated from
emergency memory reserve.
Otherwise all packets using this page will be immediately dropped,
unless for very specific sockets having SOCK_MEMALLOC bit set.
This issue might be hard to debug, because only a fraction of received
packets would be dropped.
Fixes:
4415a0319f92 ("net/mlx5e: Implement RX mapped page cache for page recycle")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tariq Toukan <tariqt@mellanox.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesper Dangaard Brouer [Wed, 18 Jan 2017 16:19:00 +0000 (17:19 +0100)]
bpf: fix samples xdp_tx_iptunnel and tc_l2_redirect with fake KBUILD_MODNAME
Fix build errors for samples/bpf xdp_tx_iptunnel and tc_l2_redirect,
when dynamic debugging is enabled (CONFIG_DYNAMIC_DEBUG) by defining a
fake KBUILD_MODNAME.
Just like Daniel Borkmann fixed other samples/bpf in commit
96a8eb1eeed2 ("bpf: fix samples to add fake KBUILD_MODNAME").
Fixes:
12d8bb64e3f6 ("bpf: xdp: Add XDP example for head adjustment")
Fixes:
90e02896f1a4 ("bpf: Add test for bpf_redirect to ipip/ip6tnl")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Wed, 18 Jan 2017 14:52:53 +0000 (15:52 +0100)]
bcm63xx_enet: avoid uninitialized variable warning
gcc-7 and probably earlier versions get confused by this function
and print a harmless warning:
drivers/net/ethernet/broadcom/bcm63xx_enet.c: In function 'bcm_enet_open':
drivers/net/ethernet/broadcom/bcm63xx_enet.c:1130:3: error: 'phydev' may be used uninitialized in this function [-Werror=maybe-uninitialized]
This adds an initialization for the 'phydev' variable when it is unused
and changes the check to test for that NULL pointer to make it clear
that we always pass a valid pointer here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Wed, 18 Jan 2017 14:52:52 +0000 (15:52 +0100)]
qed: avoid possible stack overflow in qed_ll2_acquire_connection
struct qed_ll2_info is rather large, so putting it on the stack
can cause an overflow, as this warning tries to tell us:
drivers/net/ethernet/qlogic/qed/qed_ll2.c: In function 'qed_ll2_start':
drivers/net/ethernet/qlogic/qed/qed_ll2.c:2159:1: error: the frame size of 1056 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
qed_ll2_start_ooo() already uses a dynamic allocation for the structure
to work around that problem, and we could do the same in qed_ll2_start()
as well as qed_roce_ll2_start(), but since the structure is only
used to pass a couple of initialization values here, it seems nicer
to replace it with a different structure.
Lacking any idea for better naming, I'm adding 'struct qed_ll2_conn',
which now contains all the initialization data, and this now simply
gets copied into struct qed_ll2_info rather than assigning all members
one by one.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 20 Jan 2017 16:29:43 +0000 (11:29 -0500)]
Revert "net: sctp: fix array overrun read on sctp_timer_tbl"
This reverts commit
0e73fc9a56f22f2eec4d2b2910c649f7af67b74d.
This fix wasn't correct, a better one is coming right up.
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Fri, 20 Jan 2017 13:01:57 +0000 (13:01 +0000)]
net: sctp: fix array overrun read on sctp_timer_tbl
The comparison on the timeout can lead to an array overrun
read on sctp_timer_tbl because of an off-by-one error. Fix
this by using < instead of <= and also compare to the array
size rather than SCTP_EVENT_TIMEOUT_MAX.
Fixes CoverityScan CID#
1397639 ("Out-of-bounds read")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 20 Jan 2017 15:57:42 +0000 (07:57 -0800)]
ipv6: seg6_genl_set_tunsrc() must check kmemdup() return value
seg6_genl_get_tunsrc() and set_tun_src() do not handle tun_src being
possibly NULL, so we must check kmemdup() return value and abort if
it is NULL
Fixes:
915d7e5e5930 ("ipv6: sr: add code base for control plane support of SR-IPv6")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: David Lebrun <david.lebrun@uclouvain.be>
Acked-by: David Lebrun <david.lebrun@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
hayeswang [Fri, 20 Jan 2017 06:33:55 +0000 (14:33 +0800)]
r8152: fix rtl8152_post_reset function
The rtl8152_post_reset() should sumbit rx urb and interrupt transfer,
otherwise the rx wouldn't work and the linking change couldn't be
detected.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Fri, 20 Jan 2017 06:32:42 +0000 (14:32 +0800)]
virtio-net: restore VIRTIO_HDR_F_DATA_VALID on receiving
Commit
501db511397f ("virtio: don't set VIRTIO_NET_HDR_F_DATA_VALID on
xmit") in fact disables VIRTIO_HDR_F_DATA_VALID on receiving path too,
fixing this by adding a hint (has_data_valid) and set it only on the
receiving path.
Cc: Rolf Neugebauer <rolf.neugebauer@docker.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Rolf Neugebauer <rolf.neugebauer@docker.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 19 Jan 2017 03:44:42 +0000 (19:44 -0800)]
gianfar: Do not reuse pages from emergency reserve
A driver using dev_alloc_page() must not reuse a page that had to
use emergency memory reserve.
Otherwise all packets using this page will be immediately dropped,
unless for very specific sockets having SOCK_MEMALLOC bit set.
This issue might be hard to debug, because only a fraction of the RX
ring buffer would suffer from drops.
Fixes:
75354148ce69 ("gianfar: Add paged allocation and Rx S/G")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Claudiu Manoil <claudiu.manoil@freescale.com>
Acked-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexey Kodanev [Thu, 19 Jan 2017 13:36:39 +0000 (16:36 +0300)]
tcp: initialize max window for a new fastopen socket
Found that if we run LTP netstress test with large MSS (65K),
the first attempt from server to send data comparable to this
MSS on fastopen connection will be delayed by the probe timer.
Here is an example:
< S seq 0:0 win 43690 options [mss 65495 wscale 7 tfo cookie] length 32
> S. seq 0:0 ack 1 win 43690 options [mss 65495 wscale 7] length 0
< . ack 1 win 342 length 0
Inside tcp_sendmsg(), tcp_send_mss() returns max MSS in 'mss_now',
as well as in 'size_goal'. This results the segment not queued for
transmition until all the data copied from user buffer. Then, inside
__tcp_push_pending_frames(), it breaks on send window test and
continues with the check probe timer.
Fragmentation occurs in tcp_write_wakeup()...
+0.2 > P. seq 1:43777 ack 1 win 342 length 43776
< . ack 43777, win 1365 length 0
> P. seq 43777:65001 ack 1 win 342 options [...] length 21224
...
This also contradicts with the fact that we should bound to the half
of the window if it is large.
Fix this flaw by correctly initializing max_window. Before that, it
could have large values that affect further calculations of 'size_goal'.
Fixes:
168a8f58059a ("tcp: TCP Fast Open Server - main code path")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Thu, 19 Jan 2017 09:33:29 +0000 (10:33 +0100)]
net/mlx5e: Remove unused variable
A cleanup removed the only user of this variable
mlx5/core/en_ethtool.c: In function 'mlx5e_set_channels':
mlx5/core/en_ethtool.c:546:6: error: unused variable 'ncv' [-Werror=unused-variable]
Let's remove the declaration as well.
Fixes:
639e9e94160e ("net/mlx5e: Remove unnecessary checks when setting num channels")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kefeng Wang [Thu, 19 Jan 2017 08:26:21 +0000 (16:26 +0800)]
ipv6: addrconf: Avoid addrconf_disable_change() using RCU read-side lock
Just like commit
4acd4945cd1e ("ipv6: addrconf: Avoid calling
netdevice notifiers with RCU read-side lock"), it is unnecessary
to make addrconf_disable_change() use RCU iteration over the
netdev list, since it already holds the RTNL lock, or we may meet
Illegal context switch in RCU read-side critical section.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hariprasad Shenai [Thu, 19 Jan 2017 06:20:32 +0000 (11:50 +0530)]
MAINTAINERS: update cxgb4 maintainer
Ganesg will be taking over as maintainer from now
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Wed, 18 Jan 2017 14:14:17 +0000 (15:14 +0100)]
bpf: don't trigger OOM killer under pressure with map alloc
This patch adds two helpers, bpf_map_area_alloc() and bpf_map_area_free(),
that are to be used for map allocations. Using kmalloc() for very large
allocations can cause excessive work within the page allocator, so i) fall
back earlier to vmalloc() when the attempt is considered costly anyway,
and even more importantly ii) don't trigger OOM killer with any of the
allocators.
Since this is based on a user space request, for example, when creating
maps with element pre-allocation, we really want such requests to fail
instead of killing other user space processes.
Also, don't spam the kernel log with warnings should any of the allocations
fail under pressure. Given that, we can make backend selection in
bpf_map_area_alloc() generic, and convert all maps over to use this API
for spots with potentially large allocation requests.
Note, replacing the one kmalloc_array() is fine as overflow checks happen
earlier in htab_map_alloc(), since it must also protect the multiplication
for vmalloc() should kmalloc_array() fail.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Tue, 17 Jan 2017 22:57:36 +0000 (14:57 -0800)]
lwtunnel: fix autoload of lwt modules
Trying to add an mpls encap route when the MPLS modules are not loaded
hangs. For example:
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
$ ip route add 10.10.10.10/32 encap mpls 100 via inet 10.100.1.2
The ip command hangs:
root 880 826 0 21:25 pts/0 00:00:00 ip route add 10.10.10.10/32 encap mpls 100 via inet 10.100.1.2
$ cat /proc/880/stack
[<
ffffffff81065a9b>] call_usermodehelper_exec+0xd6/0x134
[<
ffffffff81065efc>] __request_module+0x27b/0x30a
[<
ffffffff814542f6>] lwtunnel_build_state+0xe4/0x178
[<
ffffffff814aa1e4>] fib_create_info+0x47f/0xdd4
[<
ffffffff814ae451>] fib_table_insert+0x90/0x41f
[<
ffffffff814a8010>] inet_rtm_newroute+0x4b/0x52
...
modprobe is trying to load rtnl-lwt-MPLS:
root 881 5 0 21:25 ? 00:00:00 /sbin/modprobe -q -- rtnl-lwt-MPLS
and it hangs after loading mpls_router:
$ cat /proc/881/stack
[<
ffffffff81441537>] rtnl_lock+0x12/0x14
[<
ffffffff8142ca2a>] register_netdevice_notifier+0x16/0x179
[<
ffffffffa0033025>] mpls_init+0x25/0x1000 [mpls_router]
[<
ffffffff81000471>] do_one_initcall+0x8e/0x13f
[<
ffffffff81119961>] do_init_module+0x5a/0x1e5
[<
ffffffff810bd070>] load_module+0x13bd/0x17d6
...
The problem is that lwtunnel_build_state is called with rtnl lock
held preventing mpls_init from registering.
Given the potential references held by the time lwtunnel_build_state it
can not drop the rtnl lock to the load module. So, extract the module
loading code from lwtunnel_build_state into a new function to validate
the encap type. The new function is called while converting the user
request into a fib_config which is well before any table, device or
fib entries are examined.
Fixes:
745041e2aaf1 ("lwtunnel: autoload of lwt modules")
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Wed, 18 Jan 2017 03:07:19 +0000 (22:07 -0500)]
bnxt_en: Fix "uninitialized variable" bug in TPA code path.
In the TPA GRO code path, initialize the tcp_opt_len variable to 0 so
that it will be correct for packets without TCP timestamps. The bug
caused the SKB fields to be incorrectly set up for packets without
TCP timestamps, leading to these packets being rejected by the stack.
Reported-by: Andy Gospodarek <andrew.gospodarek@broadocm.com>
Acked-by: Andy Gospodarek <andrew.gospodarek@broadocm.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Gonzalez Cabanelas [Wed, 18 Jan 2017 00:26:55 +0000 (16:26 -0800)]
net: phy: bcm63xx: Utilize correct config_intr function
Commit
a1cba5613edf ("net: phy: Add Broadcom phy library for common
interfaces") make the BCM63xx PHY driver utilize bcm_phy_config_intr()
which would appear to do the right thing, except that it does not write
to the MII_BCM63XX_IR register but to MII_BCM54XX_ECR which is
different.
This would be causing invalid link parameters and events from being
generated by the PHY interrupt.
Fixes:
a1cba5613edf ("net: phy: Add Broadcom phy library for common interfaces")
Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 18 Jan 2017 20:12:17 +0000 (12:12 -0800)]
net: fix harmonize_features() vs NETIF_F_HIGHDMA
Ashizuka reported a highmem oddity and sent a patch for freescale
fec driver.
But the problem root cause is that core networking stack
must ensure no skb with highmem fragment is ever sent through
a device that does not assert NETIF_F_HIGHDMA in its features.
We need to call illegal_highdma() from harmonize_features()
regardless of CSUM checks.
Fixes:
ec5f06156423 ("net: Kill link between CSUM and SG features.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Pravin Shelar <pshelar@ovn.org>
Reported-by: "Ashizuka, Yuusuke" <ashiduka@jp.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 18 Jan 2017 20:11:21 +0000 (15:11 -0500)]
Merge branch 'xen-netback-leaks'
Igor Druzhinin says:
====================
xen-netback: fix memory leaks on XenBus disconnect
Just split the initial patch in two as proposed by Wei.
Since the approach for locking netdev statistics is inconsistent (tends not
to have any locking at all) accross the kernel we'd better to rely on our
internal lock for this purpose.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Druzhinin [Tue, 17 Jan 2017 20:49:38 +0000 (20:49 +0000)]
xen-netback: protect resource cleaning on XenBus disconnect
vif->lock is used to protect statistics gathering agents from using the
queue structure during cleaning.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Druzhinin [Tue, 17 Jan 2017 20:49:37 +0000 (20:49 +0000)]
xen-netback: fix memory leaks on XenBus disconnect
Eliminate memory leaks introduced several years ago by cleaning the
queue resources which are allocated on XenBus connection event. Namely, queue
structure array and pages used for IO rings.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 18 Jan 2017 19:58:24 +0000 (14:58 -0500)]
Merge branch 'ethtool-set-channels-fix'
Tariq Toukan says:
====================
ethtool fix
This patchset from Eran contains a fix to ethtool set_channels, where the call
to get_channels with an uninitialized parameter might result in garbage fields.
It also contains two followup changes in our mlx4/mlx5 Eth drivers.
Series generated against net commit:
0faa9cb5b383 net sched actions: fix refcnt when GETing of action after bind
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Eran Ben Elisha [Tue, 17 Jan 2017 17:19:19 +0000 (19:19 +0200)]
net/mlx5e: Remove unnecessary checks when setting num channels
Boundaries checks for the number of RX and TX should be checked by the
caller and not in the driver.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eran Ben Elisha [Tue, 17 Jan 2017 17:19:18 +0000 (19:19 +0200)]
net/mlx4_en: Remove unnecessary checks when setting num channels
Boundaries checks for the number of RX, TX, other and combined channels
should be checked by the caller and not in the driver.
In addition, remove wrong memset on get channels as it overrides the cmd
field in the requester struct.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eran Ben Elisha [Tue, 17 Jan 2017 17:19:17 +0000 (19:19 +0200)]
net: ethtool: Initialize buffer when querying device channel settings
Ethtool channels respond struct was uninitialized when querying device
channel boundaries settings. As a result, unreported fields by the driver
hold garbage. This may cause sending unsupported params to driver.
Fixes:
8bf368620486 ('ethtool: ensure channel counts are within bounds ...')
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
CC: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 18 Jan 2017 16:36:41 +0000 (11:36 -0500)]
Merge tag 'linux-can-fixes-for-4.10-
20170118' of git://git./linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2017-01-18
this is a pull request for net/master consisting of two patches.
In the first patch Einar Jón fixes a NULL-pointer-deref in the c_can_pci
driver. In the second patch Yegor Yefremov fixes the clock handling in the
ti_hecc driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Yegor Yefremov [Wed, 18 Jan 2017 10:35:57 +0000 (11:35 +0100)]
can: ti_hecc: add missing prepare and unprepare of the clock
In order to make the driver work with the common clock framework, this
patch converts the clk_enable()/clk_disable() to
clk_prepare_enable()/clk_disable_unprepare().
Also add error checking for clk_prepare_enable().
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Einar Jón [Fri, 12 Aug 2016 11:50:41 +0000 (13:50 +0200)]
can: c_can_pci: fix null-pointer-deref in c_can_start() - set device pointer
The priv->device pointer for c_can_pci is never set, but it is used
without a NULL check in c_can_start(). Setting it in c_can_pci_probe()
like c_can_plat_probe() prevents c_can_pci.ko from crashing, with and
without CONFIG_PM.
This might also cause the pm_runtime_*() functions in c_can.c to
actually be executed for c_can_pci devices - they are the only other
place where priv->device is used, but they all contain a null check.
Signed-off-by: Einar Jón <tolvupostur@gmail.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Alvaro G. M [Tue, 17 Jan 2017 08:08:16 +0000 (09:08 +0100)]
net: phy: dp83848: add DP83620 PHY support
This PHY with fiber support is register compatible with DP83848,
so add support for it.
Signed-off-by: Alvaro Gamez Machado <alvaro.gamez@hazent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Martin KaFai Lau [Tue, 17 Jan 2017 06:17:29 +0000 (22:17 -0800)]
bpf: Fix test_lru_sanity5() in test_lru_map.c
test_lru_sanity5() fails when the number of online cpus
is fewer than the number of possible cpus. It can be
reproduced with qemu by using cmd args "--smp cpus=2,maxcpus=8".
The problem is the loop in test_lru_sanity5() is testing
'i' which is incorrect.
This patch:
1. Make sched_next_online() always return -1 if it cannot
find a next cpu to schedule the process.
2. In test_lru_sanity5(), the parent process does
sched_setaffinity() first (through sched_next_online())
and the forked process will inherit it according to
the 'man sched_setaffinity'.
Fixes:
5db58faf989f ("bpf: Add tests for the LRU bpf_htab")
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lance Richardson [Mon, 16 Jan 2017 23:37:58 +0000 (18:37 -0500)]
vxlan: fix byte order of vxlan-gpe port number
vxlan->cfg.dst_port is in network byte order, so an htons()
is needed here. Also reduced comment length to stay closer
to 80 column width (still slightly over, however).
Fixes:
e1e5314de08b ("vxlan: implement GPE")
Signed-off-by: Lance Richardson <lrichard@redhat.com>
Acked-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julia Lawall [Tue, 17 Jan 2017 11:23:21 +0000 (12:23 +0100)]
stmmac: add missing of_node_put
The function stmmac_dt_phy provides several possibilities for initializing
plat->mdio_node, all of which have the effect of increasing the reference
count of the assigned value. This field is not updated elsewhere, so the
value is live until the end of the lifetime of plat (devm_allocated), just
after the end of stmmac_remove_config_dt. Thus, add an of_node_put on
plat->mdio_node in stmmac_remove_config_dt. It is possible that the field
mdio_node is never initialized, but of_node_put is NULL-safe, so it is also
safe to call of_node_put in that case.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rolf Neugebauer [Tue, 17 Jan 2017 18:13:51 +0000 (18:13 +0000)]
virtio: don't set VIRTIO_NET_HDR_F_DATA_VALID on xmit
This patch part reverts
fd2a0437dc33 and
e858fae2b0b8 which introduced a
subtle change in how the virtio_net flags are derived from the SKBs
ip_summed field.
With the above commits, the flags are set to VIRTIO_NET_HDR_F_DATA_VALID
when ip_summed == CHECKSUM_UNNECESSARY, thus treating it differently to
ip_summed == CHECKSUM_NONE, which should be the same.
Further, the virtio spec 1.0 / CS04 explicitly says that
VIRTIO_NET_HDR_F_DATA_VALID must not be set by the driver.
Fixes:
fd2a0437dc33 ("virtio_net: introduce virtio_net_hdr_{from,to}_skb")
Fixes:
e858fae2b0b8 (" virtio_net: use common code for virtio_net_hdr and skb GSO conversion")
Signed-off-by: Rolf Neugebauer <rolf.neugebauer@docker.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Tue, 17 Jan 2017 17:33:10 +0000 (09:33 -0800)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Handle multicast packets properly in fast-RX path of mac80211, from
Johannes Berg.
2) Because of a logic bug, the user can't actually force SW
checksumming on r8152 devices. This makes diagnosis of hw
checksumming bugs really annoying. Fix from Hayes Wang.
3) VXLAN route lookup does not take the source and destination ports
into account, which means IPSEC policies cannot be matched properly.
Fix from Martynas Pumputis.
4) Do proper RCU locking in netvsc callbacks, from Stephen Hemminger.
5) Fix SKB leaks in mlxsw driver, from Arkadi Sharshevsky.
6) If lwtunnel_fill_encap() fails, we do not abort the netlink message
construction properly in fib_dump_info(), from David Ahern.
7) Do not use kernel stack for DMA buffers in atusb driver, from Stefan
Schmidt.
8) Openvswitch conntack actions need to maintain a correct checksum,
fix from Lance Richardson.
9) ax25_disconnect() is missing a check for ax25->sk being NULL, in
fact it already checks this, but not in all of the necessary spots.
Fix from Basil Gunn.
10) Action GET operations in the packet scheduler can erroneously bump
the reference count of the entry, making it unreleasable. Fix from
Jamal Hadi Salim. Jamal gives a great set of example command lines
that trigger this in the commit message.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (46 commits)
net sched actions: fix refcnt when GETing of action after bind
net/mlx4_core: Eliminate warning messages for SRQ_LIMIT under SRIOV
net/mlx4_core: Fix when to save some qp context flags for dynamic VST to VGT transitions
net/mlx4_core: Fix racy CQ (Completion Queue) free
net: stmmac: don't use netdev_[dbg, info, ..] before net_device is registered
net/mlx5e: Fix a -Wmaybe-uninitialized warning
ax25: Fix segfault after sock connection timeout
bpf: rework prog_digest into prog_tag
tipc: allocate user memory with GFP_KERNEL flag
net: phy: dp83867: allow RGMII_TXID/RGMII_RXID interface types
ip6_tunnel: Account for tunnel header in tunnel MTU
mld: do not remove mld souce list info when set link down
be2net: fix MAC addr setting on privileged BE3 VFs
be2net: don't delete MAC on close on unprivileged BE3 VFs
be2net: fix status check in be_cmd_pmac_add()
cpmac: remove hopeless #warning
ravb: do not use zero-length alignment DMA descriptor
mlx4: do not call napi_schedule() without care
openvswitch: maintain correct checksum state in conntrack actions
tcp: fix tcp_fastopen unaligned access complaints on sparc
...
Linus Torvalds [Tue, 17 Jan 2017 17:27:50 +0000 (09:27 -0800)]
Merge branch 'stable/for-linus-4.10' of git://git./linux/kernel/git/konrad/swiotlb
Pull swiotlb fix from Konrad Rzeszutek Wilk:
"A tiny fix to make sure that page-sized mappings are page-aligned (and
not say straddle two pages). This is important for some drivers (such
as NVME)"
* 'stable/for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
swiotlb: ensure that page-sized mappings are page-aligned
Linus Torvalds [Tue, 17 Jan 2017 17:08:19 +0000 (09:08 -0800)]
Merge tag 'mmc-v4.10-rc3' of git://git./linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- fix regressions detecting HS/HS DDR eMMC cards related to CMD6
MMC host:
- mmc: mxs-mmc: Fix additional cycles after transmission stop
- sdhci-acpi: Only powered up enabled acpi child devices
- meson: avoid possible NULL dereference"
* tag 'mmc-v4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: core: Restore parts of the polling policy when switch to HS/HS DDR
mmc: mxs-mmc: Fix additional cycles after transmission stop
mmc: sdhci-acpi: Only powered up enabled acpi child devices
MMC: meson: avoid possible NULL dereference
Linus Torvalds [Tue, 17 Jan 2017 16:50:59 +0000 (08:50 -0800)]
Merge tag 'for-linus-
20170116' of git://git.infradead.org/linux-mtd
Pull MTD fixes from Brian Norris:
"Just NAND updates from Boris:
- avoid compiling xway NAND controller driver as a module (which
didn't work)
- fix tango NAND DT binding and make sure the controller is in a
clean state at probe time
- add dependency on HAS_IOMEM to the oxnas NAND driver
- fix irq number validity check in the lpc32xx driver"
* tag 'for-linus-
20170116' of git://git.infradead.org/linux-mtd:
mtd: nand: lpc32xx: fix invalid error handling of a requested irq
mtd: nand: tango: Reset pbus to raw mode in probe
mtd: nand: tango: Update DT binding description
mtd: nand: oxnas_nand: fix build errors on arch/um, require HAS_IOMEM
mtd: nand: xway: fix build because of module functions
mtd: nand: xway: disable module support
Jamal Hadi Salim [Sun, 15 Jan 2017 15:14:06 +0000 (10:14 -0500)]
net sched actions: fix refcnt when GETing of action after bind
Demonstrating the issue:
.. add a drop action
$sudo $TC actions add action drop index 10
.. retrieve it
$ sudo $TC -s actions get action gact index 10
action order 1: gact action drop
random type none pass val 0
index 10 ref 2 bind 0 installed 29 sec used 29 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
... bug 1 above: reference is two.
Reference is actually 1 but we forget to subtract 1.
... do a GET again and we see the same issue
try a few times and nothing changes
~$ sudo $TC -s actions get action gact index 10
action order 1: gact action drop
random type none pass val 0
index 10 ref 2 bind 0 installed 31 sec used 31 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
... lets try to bind the action to a filter..
$ sudo $TC qdisc add dev lo ingress
$ sudo $TC filter add dev lo parent ffff: protocol ip prio 1 \
u32 match ip dst 127.0.0.1/32 flowid 1:1 action gact index 10
... and now a few GETs:
$ sudo $TC -s actions get action gact index 10
action order 1: gact action drop
random type none pass val 0
index 10 ref 3 bind 1 installed 204 sec used 204 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
$ sudo $TC -s actions get action gact index 10
action order 1: gact action drop
random type none pass val 0
index 10 ref 4 bind 1 installed 206 sec used 206 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
$ sudo $TC -s actions get action gact index 10
action order 1: gact action drop
random type none pass val 0
index 10 ref 5 bind 1 installed 235 sec used 235 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
.... as can be observed the reference count keeps going up.
After the fix
$ sudo $TC actions add action drop index 10
$ sudo $TC -s actions get action gact index 10
action order 1: gact action drop
random type none pass val 0
index 10 ref 1 bind 0 installed 4 sec used 4 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
$ sudo $TC -s actions get action gact index 10
action order 1: gact action drop
random type none pass val 0
index 10 ref 1 bind 0 installed 6 sec used 6 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
$ sudo $TC qdisc add dev lo ingress
$ sudo $TC filter add dev lo parent ffff: protocol ip prio 1 \
u32 match ip dst 127.0.0.1/32 flowid 1:1 action gact index 10
$ sudo $TC -s actions get action gact index 10
action order 1: gact action drop
random type none pass val 0
index 10 ref 2 bind 1 installed 32 sec used 32 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
$ sudo $TC -s actions get action gact index 10
action order 1: gact action drop
random type none pass val 0
index 10 ref 2 bind 1 installed 33 sec used 33 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
Fixes:
aecc5cefc389 ("net sched actions: fix GETing actions")
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Mon, 16 Jan 2017 20:15:59 +0000 (12:15 -0800)]
Merge tag 'nfs-for-4.10-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
- fix invalid fget()/fput() calls when doing file locking
- fix multiple directory cache invalidation issues due to the client
failing to recognise that the directory wasn't changed
- fix client recovery when server reboots multiple times
* tag 'nfs-for-4.10-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFSv4: Fix client recovery when server reboots multiple times
NFSv4: update_changeattr should update the attribute timestamp
NFSv4: Don't call update_changeattr() unless the unlink is successful
NFSv4: Don't apply change_info4 twice on rename within a directory
NFSv4: Call update_changeattr() from _nfs4_proc_open only if a file was created
nfs: Don't take a reference on fl->fl_file for LOCK operation
David S. Miller [Mon, 16 Jan 2017 20:08:29 +0000 (15:08 -0500)]
Merge branch 'mlx4-core-fixes'
Tariq Toukan says:
====================
mlx4 core fixes
This patchset contains bug fixes from Jack to the mlx4 Core driver.
Patch 1 solves a race in the flow of CQ free.
Patch 2 moves some qp context flags update to the correct qp transition.
Patch 3 eliminates warnings from the path of SRQ_LIMIT that flood the message log,
and keeps them only in the path of SRQ_CATAS_ERROR.
Series generated against net commit:
1a717fcf8bbe Merge tag 'mac80211-for-davem-2017-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jack Morgenstein [Mon, 16 Jan 2017 16:31:39 +0000 (18:31 +0200)]
net/mlx4_core: Eliminate warning messages for SRQ_LIMIT under SRIOV
When running SRIOV, warnings for SRQ LIMIT events flood the Hypervisor's
message log when (correct, normally operating) apps use SRQ LIMIT events
as a trigger to post WQEs to SRQs.
Add more information to the existing debug printout for SRQ_LIMIT, and
output the warning messages only for the SRQ CATAS ERROR event.
Fixes:
acba2420f9d2 ("mlx4_core: Add wrapper functions and comm channel and slave event support to EQs")
Fixes:
e0debf9cb50d ("mlx4_core: Reduce warning message for SRQ_LIMIT event to debug level")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jack Morgenstein [Mon, 16 Jan 2017 16:31:38 +0000 (18:31 +0200)]
net/mlx4_core: Fix when to save some qp context flags for dynamic VST to VGT transitions
Save the qp context flags byte containing the flag disabling vlan stripping
in the RESET to INIT qp transition, rather than in the INIT to RTR
transition. Per the firmware spec, the flags in this byte are active
in the RESET to INIT transition.
As a result of saving the flags in the incorrect qp transition, when
switching dynamically from VGT to VST and back to VGT, the vlan
remained stripped (as is required for VST) and did not return to
not-stripped (as is required for VGT).
Fixes:
f0f829bf42cd ("net/mlx4_core: Add immediate activate for VGT->VST->VGT")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jack Morgenstein [Mon, 16 Jan 2017 16:31:37 +0000 (18:31 +0200)]
net/mlx4_core: Fix racy CQ (Completion Queue) free
In function mlx4_cq_completion() and mlx4_cq_event(), the
radix_tree_lookup requires a rcu_read_lock.
This is mandatory: if another core frees the CQ, it could
run the radix_tree_node_rcu_free() call_rcu() callback while
its being used by the radix tree lookup function.
Additionally, in function mlx4_cq_event(), since we are adding
the rcu lock around the radix-tree lookup, we no longer need to take
the spinlock. Also, the synchronize_irq() call for the async event
eliminates the need for incrementing the cq reference count in
mlx4_cq_event().
Other changes:
1. In function mlx4_cq_free(), replace spin_lock_irq with spin_lock:
we no longer take this spinlock in the interrupt context.
The spinlock here, therefore, simply protects against different
threads simultaneously invoking mlx4_cq_free() for different cq's.
2. In function mlx4_cq_free(), we move the radix tree delete to before
the synchronize_irq() calls. This guarantees that we will not
access this cq during any subsequent interrupts, and therefore can
safely free the CQ after the synchronize_irq calls. The rcu_read_lock
in the interrupt handlers only needs to protect against corrupting the
radix tree; the interrupt handlers may access the cq outside the
rcu_read_lock due to the synchronize_irq calls which protect against
premature freeing of the cq.
3. In function mlx4_cq_event(), we change the mlx_warn message to mlx4_dbg.
4. We leave the cq reference count mechanism in place, because it is
still needed for the cq completion tasklet mechanism.
Fixes:
6d90aa5cf17b ("net/mlx4_core: Make sure there are no pending async events when freeing CQ")
Fixes:
225c7b1feef1 ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sun, 15 Jan 2017 18:19:00 +0000 (19:19 +0100)]
net: stmmac: don't use netdev_[dbg, info, ..] before net_device is registered
Don't use netdev_info and friends before the net_device is registered.
This avoids ugly messages like
"meson8b-dwmac
c9410000.ethernet (unnamed net_device) (uninitialized):
Enable RX Mitigation via HW Watchdog Timer"
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>