OSDN Git Service
John W. Linville [Mon, 12 Jan 2009 19:46:39 +0000 (14:46 -0500)]
p54: fix "‘ret’ may be used uninitialized" warning
drivers/net/wireless/p54/p54common.c: In function ‘p54_config’:
drivers/net/wireless/p54/p54common.c:1853: warning: ‘ret’ may be used uninitialized in this function
Signed-off-by: John W. Linville <linville@tuxdriver.com>
John W. Linville [Mon, 12 Jan 2009 19:44:52 +0000 (14:44 -0500)]
iwl3945: fix "‘power_idx’ may be used uninitialized" warning
drivers/net/wireless/iwlwifi/iwl-3945.c: In function ‘iwl3945_txpower_set_from_eeprom’:
drivers/net/wireless/iwlwifi/iwl-3945.c:2222: warning: ‘power_idx’ may be used uninitialized in this function
Signed-off-by: John W. Linville <linville@tuxdriver.com>
John W. Linville [Mon, 12 Jan 2009 19:43:18 +0000 (14:43 -0500)]
b43legacy: fix "‘up_dev’ may be used uninitialized" warning
drivers/net/wireless/b43legacy/main.c: In function ‘b43legacy_op_dev_config’:
drivers/net/wireless/b43legacy/main.c:2468: warning: ‘up_dev’ may be used uninitialized in this function
Signed-off-by: John W. Linville <linville@tuxdriver.com>
John W. Linville [Mon, 12 Jan 2009 19:40:20 +0000 (14:40 -0500)]
b43: fix "‘gmode’ may be used uninitialized" warning
drivers/net/wireless/b43/main.c: In function ‘b43_op_config’:
drivers/net/wireless/b43/main.c:3264: warning: ‘gmode’ may be used uninitialized
Signed-off-by: John W. Linville <linville@tuxdriver.com>
John W. Linville [Mon, 12 Jan 2009 19:37:44 +0000 (14:37 -0500)]
mac80211: fix "‘ret’ may be used uninitialized" warning
net/mac80211/ht.c: In function ‘ieee80211_start_tx_ba_session’:
net/mac80211/ht.c:472: warning: ‘ret’ may be used uninitialized in this function
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Andrey Yurovsky [Mon, 5 Jan 2009 22:37:31 +0000 (14:37 -0800)]
libertas_tf: return NETDEV_TX_OK in TX op
The TX op should return NETDEV_TX_OK or NETDEV_TX_BUSY.
Signed-off-by: Andrey Yurovsky <andrey@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ivo van Doorn [Sat, 3 Jan 2009 15:27:14 +0000 (16:27 +0100)]
rt2x00: Fix rt2500usb HW crypto: WEP 128 & AES
The TXD_W0_CIPHER field is a 1-bit field. It only acts as boolean value
to indicate if the frame must be encrypted or not.
The way rt2x00_set_field32() worked it would grab the least signifcant bit
from txdesc->cipher and use that as value. Because of that WEP 64 and TKIP
worked since they had odd-numbered values, while WEP 128 and AES were
even numbers and didn't work.
Correctly booleanize the txdecs->cipher value to allow the hardware to
encrypt the outgoing data. After this we can enable HW crypto by default again.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Christian Lamparter [Sat, 27 Dec 2008 21:19:49 +0000 (22:19 +0100)]
mac80211: initialize RC data for all mesh links upon allocation
This patch fixes a panic that might occur, if the device is part of a mesh
and tries to send with a higher rate index than "0".
kernel BUG at net/mac80211/rate.c:239!
invalid opcode: 0000 [#1] SMP
[...]
Call Trace:
<IRQ> <0> ? invoke_tx_handlers+0x474/0xb57 [mac80211]
? __ieee80211_tx_prepare+0x260/0x2a8 [mac80211]
? ieee80211_master_start_xmit+0x300/0x43a [mac80211]
? __qdisc_run+0xde/0x1da
? net_tx_action+0xb4/0x102
Kernel panic - not syncing: Fatal exception in interrupt
Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Bob Copeland [Tue, 6 Jan 2009 01:46:34 +0000 (20:46 -0500)]
ath5k: fix return values from ath5k_tx
Should return NETDEV_TX_{OK,BUSY} instead of 0,-1 (this doesn't change
any current functionality).
Changes-licensed-under: 3-Clause-BSD
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Tue, 6 Jan 2009 05:11:26 +0000 (23:11 -0600)]
rtl8187: Fix module so that rmmod/insmod does not error
Due to misunderstanding of the returned values allowed for the tx callback
of mac80211, rtl8187 was using skb's that had been freed. This problem was
triggered when the module was sujected to a rmmod/insmod cycle.
After that was fixed, the modules would not work after the rmmod/insmod cycle
until the USB device was reset.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Christian Lamparter [Fri, 26 Dec 2008 18:09:45 +0000 (19:09 +0100)]
p54: fix WARN_ON at line 2247 of net/mac80211/rx.c
This patch hopefully fixes a mac80211<->p54 interaction problem, which was
described by Larry Finger (ref: http://marc.info/?l=linux-wireless&m=
123009889327707 )
I guess the warning was triggered by pending frames in the receive queue,
while we're doing a band change 5GHz.
Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Pavel Roskin [Mon, 22 Dec 2008 21:39:36 +0000 (16:39 -0500)]
mac80211: allow mode change if IBSS is not allowed
Changing mode on an interface is not allowed if IBSS is disabled for the
current channel. That restriction should only apply when switching to
the ad-hoc mode, as it was prior to "cfg80211: handle SIOCGIWMODE/SIOCSIWMODE".
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Steve Brown [Tue, 23 Dec 2008 12:57:05 +0000 (07:57 -0500)]
ath5k: Correct usage of AR5K_CFG_ADHOC
This corrects usage of AR5K_CFG_ADHOC introduced in
"ath5k: Update PCU code". Also,
the name of the indicator is changed to AR5K_CFG_IBSS to more
accurately reflect its function. This change restores
beaconing in AP and mesh modes.
Signed-off-by: Steve Brown <sbrown@cortland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Jouni Malinen [Mon, 22 Dec 2008 14:45:54 +0000 (16:45 +0200)]
ath9k: Revert fix to TX status reporting for retries and MCS index
This patch reverts "ath9k: Fix TX status reporting for retries and MCS index"
because that change ended up breaking ath9k rate control. While the
MCS index reporting to mac80211 was indeed fixed by the patch, it did
not take into account that the ath9k rate control algorithm was
updating private tables based on this index and the index comes
through the rate control API call, i.e., based on mac80211 TX status
call. In addition, it looks like the "fix" to remove +1 from TX status
'count' field was not correct based on ieee80211_tx_status()
implementation that counts the total of count values, but starting
from -1, not 0.
The TX status reporting for frames using MCS needs to be fixed
somehow, but it does not look like there is any easy fix for the ath9k
rate control algorithm, so the best option now seems to be to revert the
change and bring it back once the rate control code is cleaned up to
handle this better.
Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Christian Lamparter [Mon, 22 Dec 2008 14:35:31 +0000 (15:35 +0100)]
minstrel: fix warning if lowest supported rate index is not 0
This patch fixes the following WARNING (caused by rix_to_ndx): "
>WARNING: at net/mac80211/rc80211_minstrel.c:69 minstrel_rate_init+0xd2/0x33a [mac80211]()
>[...]
>Call Trace:
> warn_on_slowpath+0x51/0x75
> _format_mac_addr+0x4c/0x88
> minstrel_rate_init+0xd2/0x33a [mac80211]
> print_mac+0x16/0x1b
> schedule_hrtimeout_range+0xdc/0x107
> ieee80211_add_station+0x158/0x1bd [mac80211]
> nl80211_new_station+0x1b3/0x20b [cfg80211]
The reason is that I'm experimenting with "g" only mode on a 802.11 b/g card.
Therefore rate_lowest_index returns 4 (= 6Mbit, instead of usual 0 = 1Mbit).
Since mi->r array is initialized with zeros in minstrel_alloc_sta,
rix_to_ndx has a hard time to find the 6Mbit entry and will trigged the WARNING.
Signed-off-by: Christian Lamparter <chunkeey@web.de>
Acked-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Senthil Balasubramanian [Mon, 22 Dec 2008 11:01:58 +0000 (16:31 +0530)]
ath9k: Fix incorrect sequence numbering for unaggregated QoS Frame.
This patch fixes an issue with the sequence numbers of unaggregated
QoS frames, because of which the frames are handled in a different order
at the AP and resulted in MLME REPLAYFAILURE.
Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ivo van Doorn [Sun, 21 Dec 2008 22:19:17 +0000 (23:19 +0100)]
Fix rt2500usb HW crypto: TKIP
rt2500usb doesn't strip the IV/ICV data from received frames,
so we don't need to set the RX_FLAG_IV_STRIPPED flag.
We do need to set the RX_FLAG_MMIC_STRIPPED flag for all
encryption types since the MMIC has been removed from the frame.
After this patch TKIP Hardware crypto works for rt2500usb.
WEP and AES are still failing.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Larry Finger [Sun, 21 Dec 2008 21:40:33 +0000 (15:40 -0600)]
rtl8180: Fix to add STA mode
To be compatible with mac80211 following "mac80211: only create
default STA interface if supported", rtl8180 needs to set
NL80211_IFTYPE_STATION in interface_modes.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Reported-by: Fabio Rossi <rossi.f@inwind.it>
Tested-by: Piter PUNK <piterpunk@unitednerds.org>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Daniel Wu [Sat, 20 Dec 2008 18:53:29 +0000 (10:53 -0800)]
iwlwifi: Fix typo in iwl-commands.h for CCK rate bit range.
My first (minor) patch, hopefully this is correct.
Fix a typo in iwl-commands.h for CCK rates which needs 7 bits and not 4.
Signed-off-by: Daniel Wu <dyqith@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ivo van Doorn [Sat, 20 Dec 2008 10:00:23 +0000 (11:00 +0100)]
rt2x00: Fix segementation fault
The queue_end() macro points to 1 position after the
queue, which means that if we want to know if queue
is at the end of the queue we should first increment
the position and then check if it is a valid entry.
This fixes a segmentation fault which only occurs when
the device has enough endpoints to provide a dedicated
endpoint for all TX queues (which likely won't happen
for rt2500usb and rt73usb, but will happen for rt2800usb).
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Christian Lamparter [Sat, 20 Dec 2008 01:21:56 +0000 (02:21 +0100)]
p54usb: fix random traffic stalls (LM87)
All LM87 firmwares need a explicit termination "packet",
in oder to finish the pending transfer properly.
Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Christian Lamparter [Sat, 20 Dec 2008 01:21:37 +0000 (02:21 +0100)]
p54: crypto offload fixes
This patch fixes two small flaws:
- restore the original TKIP IV if we altered it.
- reserve & initialize ICV with zeros.
This is actually only necessary for some obsolete p54usb firmwares.
But we don't know yet, if all devices are compatible with the new revisions.
Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Pavel Roskin [Fri, 9 Jan 2009 17:31:48 +0000 (12:31 -0500)]
orinoco_cs: add ID for ARtem Onair Comcard 11
Reported by Michael Jarosch <mitsch@riotmusic.de>
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Samuel Ortiz [Thu, 8 Jan 2009 18:20:00 +0000 (10:20 -0800)]
iwlwifi: Fix get_cmd_string() for REPLY_3945_RX
0x1b is a 3945 specific command, we should print it too when debugging.
Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Sujith [Wed, 7 Jan 2009 08:55:29 +0000 (14:25 +0530)]
ath9k: Fix chainmask handling bug
The chainmasks have to be updated before setting the channel,
since the HW reset routine uses them to set the appropriate registers.
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
David Kilroy [Wed, 7 Jan 2009 00:23:55 +0000 (00:23 +0000)]
orinoco: take the driver lock in the rx tasklet
Fix the warning reproduced below.
We add to rx_list in interrupt context and remove elements in tasklet
context. While removing elements we need to prevent the interrupt
modifying the list.
Note that "orinoco: Process bulk of receive interrupt in a tasklet" did not
preserve locking semantics on what is now orinoco_rx.
This patch reinstates the locking semantics and ensures it covers
rx_list as well. This leads to additional cleanup required in
free_orinocodev.
[89479.105038] WARNING: at lib/list_debug.c:30 __list_add+0x8f/0xa0()
[89479.105058] list_add corruption. prev->next should be next (
dddb3568), but was
cbc28978. (prev=
dddb3568).
[89479.106002] Pid: 15746, comm: X Not tainted 2.6.28-1avb #26
[89479.106020] Call Trace:
[89479.106062] [<
c011d3b0>] warn_slowpath+0x60/0x80
[89479.106104] [<
c01073d0>] ? native_sched_clock+0x20/0x70
[89479.106194] [<
c013d825>] ? lock_release_holdtime+0x35/0x200
[89479.106218] [<
c018d9f0>] ? __slab_alloc+0x550/0x560
[89479.106254] [<
c02f9c9d>] ? _spin_unlock+0x1d/0x20
[89479.106270] [<
c018d9f0>] ? __slab_alloc+0x550/0x560
[89479.106302] [<
c01ff2a7>] ? delay_tsc+0x17/0x24
[89479.106319] [<
c01ff221>] ? __const_udelay+0x21/0x30
[89479.106376] [<
dfa8b1e2>] ? hermes_bap_seek+0x112/0x1e0 [hermes]
[89479.106396] [<
c013d7eb>] ? trace_hardirqs_off+0xb/0x10
[89479.106418] [<
c018e307>] ? __kmalloc_track_caller+0xb7/0x110
[89479.106448] [<
c028eefc>] ? dev_alloc_skb+0x1c/0x30
[89479.106465] [<
c028eefc>] ? dev_alloc_skb+0x1c/0x30
[89479.106482] [<
c020e13f>] __list_add+0x8f/0xa0
[89479.106551] [<
dfd0fcae>] orinoco_interrupt+0xcae/0x16c0 [orinoco]
[89479.106574] [<
c013b0e3>] ? tick_dev_program_event+0x33/0xb0
[89479.106594] [<
c01073d0>] ? native_sched_clock+0x20/0x70
[89479.106613] [<
c013d825>] ? lock_release_holdtime+0x35/0x200
[89479.106662] [<
c013d7eb>] ? trace_hardirqs_off+0xb/0x10
[89479.106892] [<
dfe7faa7>] ? usb_hcd_irq+0x97/0xa0 [usbcore]
[89479.106926] [<
c015ba79>] handle_IRQ_event+0x29/0x60
[89479.106947] [<
c015cf89>] handle_level_irq+0x69/0xe0
[89479.106963] [<
c015cf20>] ? handle_level_irq+0x0/0xe0
[89479.106977] <IRQ> [<
c02ca933>] ? tcp_v4_rcv+0x633/0x6e0
[89479.107025] [<
c0103f0c>] ? common_interrupt+0x28/0x30
[89479.107057] [<
c02a0000>] ? sk_run_filter+0x320/0x7a0
[89479.107078] [<
c020e041>] ? list_del+0x21/0x90
[89479.107106] [<
dfd0d24e>] ? orinoco_rx_isr_tasklet+0x2ce/0x480 [orinoco]
[89479.107131] [<
c01402e0>] ? __lock_acquire+0x160/0x1650
[89479.107151] [<
c01073d0>] ? native_sched_clock+0x20/0x70
[89479.107169] [<
c013d825>] ? lock_release_holdtime+0x35/0x200
[89479.107200] [<
c012249a>] ? irq_enter+0xa/0x60
[89479.107217] [<
c0104e52>] ? do_IRQ+0xd2/0x130
[89479.107518] [<
c010342c>] ? restore_nocheck_notrace+0x0/0xe
[89479.107542] [<
c0122830>] ? __do_softirq+0x0/0x110
[89479.107561] [<
c013f7b4>] ? trace_hardirqs_on_caller+0x74/0x140
[89479.107583] [<
c01ff678>] ? trace_hardirqs_on_thunk+0xc/0x10
[89479.107602] [<
c0122087>] ? tasklet_action+0x27/0x90
[89479.107620] [<
c013f7b4>] ? trace_hardirqs_on_caller+0x74/0x140
[89479.107638] [<
c01220a3>] ? tasklet_action+0x43/0x90
[89479.107655] [<
c012289f>] ? __do_softirq+0x6f/0x110
[89479.107674] [<
c0122830>] ? __do_softirq+0x0/0x110
[89479.107685] <IRQ> [<
c015cf20>] ? handle_level_irq+0x0/0xe0
[89479.107715] [<
c012246d>] ? irq_exit+0x5d/0x80
[89479.107732] [<
c0104e52>] ? do_IRQ+0xd2/0x130
[89479.107747] [<
c0103337>] ? sysenter_exit+0xf/0x16
[89479.107765] [<
c013f83d>] ? trace_hardirqs_on_caller+0xfd/0x140
[89479.107782] [<
c0103f0c>] ? common_interrupt+0x28/0x30
[89479.107797] ---[ end trace
a1fc0a52df4a729d ]---
Reported-by: Andrey Borzenkov <arvidjaar@mail.ru>
Signed-off-by: David Kilroy <kilroyd@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Jouni Malinen [Mon, 5 Jan 2009 11:51:24 +0000 (13:51 +0200)]
ath9k: Enforce module build if rfkill is a module
CONFIG_ATH9K=y results in build issues if CONFIG_RFKILL=m since ath9k
does not depend on rfkill in kconfig (i.e., CONFIG_RFKILL is used to
select whether to enable rfkill in ath9k), but uses its functions if
rfkill is enabled. Enforce ath9k to be build as a module if
CONFIG_RFKILL=m to avoid this invalid configuration.
Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Michiel [Sun, 4 Jan 2009 23:22:28 +0000 (17:22 -0600)]
p54usb: Add USB ID for Thomson Speedtouch 121g
Add the USB ID for Thomson Speedtouch 121g to p54usb.
Signed-off-by: Michiel <michiel@ettema.net>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ivo van Doorn [Sun, 4 Jan 2009 16:33:25 +0000 (17:33 +0100)]
rt2x00: Fix TX short preamble detection
The short preamble mode was not correctly detected during TX,
rt2x00 used the rate->hw_value_short field but mac80211 is not
using this field that way.
Instead the flag IEEE80211_TX_RC_USE_SHORT_PREAMBLE should be
used to determine if the frame should be send out using
short preamble or not.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Stefan Lippers-Hollmann [Sun, 4 Jan 2009 00:10:49 +0000 (01:10 +0100)]
rt2x00: add USB ID for the Linksys WUSB200.
add USB ID for the Linksys WUSB200 Wireless-G Business USB Adapter to
rt73usb.
Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Cc: stable <stable@kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Larry Finger [Sat, 3 Jan 2009 18:45:12 +0000 (12:45 -0600)]
p54usb: Fix to prevent SKB memory allocation errors with 4K page size
On x86_64 architecture with 4K page size and SLUB debugging enabled, stress
testing on p54usb has resulted in skb allocation failures of O(1) and extreme
page fragmentation. Reducing rx_mtu fixes this problem by reducing the size of
all receive skb allocations to be of O(0). This change does not impact
performance in any way.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Andrew Price [Fri, 2 Jan 2009 08:05:27 +0000 (08:05 +0000)]
rt2x00: Fix radio LED type check
Since "rt2x00: Fix LED state handling", rt2x00leds_led_radio wrongly
checks that the LED type is LED_TYPE_ASSOC. This patch makes it check
for LED_TYPE_RADIO once again.
Signed-off-by: Andrew Price <andy@andrewprice.me.uk>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Erik Ekman [Tue, 30 Dec 2008 21:49:28 +0000 (22:49 +0100)]
Wireless: Fix Kconfig fact error
Raytheon cards use 2.4 GHz, not 2.4 MHz.
See http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Linux.Wireless.drivers.html#Raylink
Signed-off-by: Erik Ekman <erik@kryo.se>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Timur Tabi [Sun, 11 Jan 2009 08:25:21 +0000 (00:25 -0800)]
ucc_geth: use correct UCCE macros
The UCC Event Register (UCCE) already has unambigous macro definitions in qe.h,
so we should not be defining our own in the UCC Ethernet driver.
Removed unused local variable 'dev' from ucc_geth_poll(), which fixes
a warning caused by commit
908a7a16b852ffd618a9127be8d62432182d81b4
("net: Remove unused netdev arg from some NAPI interfaces.").
Replaced in_be/out_be pairs with setbits32 or clrbits32, where applicable.
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Williams [Sun, 11 Jan 2009 08:20:39 +0000 (00:20 -0800)]
net_dma: acquire/release dma channels on ifup/ifdown
The recent dmaengine rework removed the capability to remove dma device
driver modules while net_dma is active. Rather than notify
dmaengine-clients that channels are trying to be removed, we now rely on
clients to notify dmaengine when they no longer have a need for
channels. Teach net_dma to release channels by taking dmaengine
references at netdevice open and dropping references at netdevice close.
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Roland Dreier [Sun, 11 Jan 2009 08:19:36 +0000 (00:19 -0800)]
cxgb3: Keep LRO off if disabled when interface is down
I have a system with a Chelsio adapter (driven by cxgb3) whose ports are
part of a Linux bridge. Recently I updated the kernel and discovered
that things stopped working because cxgb3 was doing LRO on packets that
were passed into the bridge code for forwarding. (Incidentally, this
problem manifested itself in a strange way that made debugging a bit
interesting -- for some reason, the skb_warn_if_lro() check in bridge
didn't trigger and these LROed packets were forwarded out a forcedeth
interface, and caused the forcedeth transmit path to get stuck)
This is because cxgb3 has no way of keeping state for the LRO flag until
the interface is brought up, so if the bridging code disables LRO while
the interface is down, then cxgb3_up() will just reenable LRO, and on my
Debian system at least, the init scripts add interfaces to a bridge
before bringing the interfaces up.
Fix this by keeping track of each interface's LRO state in cxgb3 so that
when bridge disables LRO, it stays disabled in cxgb3_up() when the
interface is brought up. I did this by changing the rx_csum_offload
flag into a pair of bit flags; the effect of this on the rx_eth() fast
path is miniscule enough that it should be fine (eg on x86, a cmpb
instruction becomes a testb instruction).
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings [Sun, 11 Jan 2009 08:18:13 +0000 (00:18 -0800)]
sfc: SFT9001: Fix condition for LNPGA power-off
Only the SFX7101 requires software power control. This was
incorrectly being applied to the SFT9001 rev A as well.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gerrit Renker [Sun, 11 Jan 2009 08:17:22 +0000 (00:17 -0800)]
dccp ccid-3: Fix RFC reference
Thanks to Wei and Arnaldo for pointing out the correct
new reference for CCID-3.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steve Glendinning [Sun, 11 Jan 2009 08:14:52 +0000 (00:14 -0800)]
smsc911x: register irq with device name, not driver name
This change lets "cat /proc/interrupts" show the name of the ethernet
device (e.g. eth0) rather than the driver name (smsc911x).
Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steve Glendinning [Sun, 11 Jan 2009 08:14:27 +0000 (00:14 -0800)]
smsc911x: fix smsc911x_reg_read compiler warning
if this code path is ever hit, the platform_data struct isn't properly
configured with a bus width flag so the device won't work (hence the
BUG()).
This patch adds a dummy return statement to eliminate this compiler
warning:
drivers/net/smsc911x.c: In function 'smsc911x_reg_read':
drivers/net/smsc911x.c:148: warning: control reaches end of non-void function
Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ayaz Abdulla [Sun, 11 Jan 2009 08:09:04 +0000 (00:09 -0800)]
forcedeth: napi schedule lock fix
This patch fixes a potential race condition between scheduling napi and
completing napi poll. The call to netif_rx_schedule should be under
protection of the lock (as is the completion), otherwise, interrupts
could be masked off.
Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Leonardo Potenza [Sat, 10 Jan 2009 07:06:28 +0000 (23:06 -0800)]
net: fix section mismatch warnings in dccp/ccids/lib/tfrc.c
Removed the __exit annotation of tfrc_lib_exit(), in order to suppress the following section mismatch messages:
WARNING: net/dccp/dccp.o(.text+0xd9): Section mismatch in reference from the function ccid_cleanup_builtins() to the function .exit.text:tfrc_lib_exit()
The function ccid_cleanup_builtins() references a function in an exit section.
Often the function tfrc_lib_exit() has valid usage outside the exit section
and the fix is to remove the __exit annotation of tfrc_lib_exit.
WARNING: net/dccp/dccp.o(.init.text+0x48): Section mismatch in reference from the function ccid_initialize_builtins() to the function .exit.text:tfrc_lib_exit()
The function __init ccid_initialize_builtins() references
a function __exit tfrc_lib_exit().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __exit annotation of
tfrc_lib_exit() so it may be used outside an exit section.
Signed-off-by: Leonardo Potenza <lpotenza@inwind.it>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ayaz Abdulla [Sat, 10 Jan 2009 06:40:06 +0000 (22:40 -0800)]
forcedeth: remove mgmt unit for mcp79 chipset
This patch removes the feature flag for mgmt unit as it is not used for
this chipset.
Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ron Mercer [Fri, 9 Jan 2009 11:31:53 +0000 (11:31 +0000)]
qlge: Remove dynamic alloc of rx ring control blocks.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ron Mercer [Fri, 9 Jan 2009 11:31:52 +0000 (11:31 +0000)]
qlge: Fix schedule while atomic issue.
There is no need to sleep while waiting for the hardware
semaphore to become available.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ron Mercer [Fri, 9 Jan 2009 11:31:51 +0000 (11:31 +0000)]
qlge: Remove support for device ID 8000.
Support for dev id 8000 is pushed out until 2.6.30.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ron Mercer [Fri, 9 Jan 2009 11:31:50 +0000 (11:31 +0000)]
qlge: Get rid of split addresses in hardware control blocks.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ron Mercer [Fri, 9 Jan 2009 11:31:49 +0000 (11:31 +0000)]
qlge: Get rid of volatile usage for shadow register.
Putting back ql_read_sh_reg() function and using rmb() instead of
volatile.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ayaz Abdulla [Fri, 9 Jan 2009 11:03:54 +0000 (11:03 +0000)]
forcedeth: version bump and copyright
This patch bumps up the version number and adds current year to copyright.
Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ayaz Abdulla [Fri, 9 Jan 2009 11:03:44 +0000 (11:03 +0000)]
forcedeth: xmit lock fix
This patch fixes a potential race condition between xmit thread and xmit
completion thread. The calculation of empty tx descriptors is not
performed under the lock. This could cause it to set the stop flag while
the completion thread finishes all tx's. This will result in the tx
queue in stopped state and no one to wake it up.
Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Hemminger [Fri, 9 Jan 2009 10:45:37 +0000 (10:45 +0000)]
netdev: missing validate_address hooks
Some devices were converted incorrectly and are missing the validate
address hooks.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Hemminger [Fri, 9 Jan 2009 11:13:14 +0000 (11:13 +0000)]
netdev: add missing set_mac_address hook
Many drivers lost the ability to set ethernet address accidently
during the net_device_ops conversion.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Clifford Wolf [Fri, 9 Jan 2009 10:23:11 +0000 (10:23 +0000)]
netdev: gianfar: add MII ioctl handler
This is the same kind of wrapper that can also be found in many
other network device drivers.
Tested with a freescale MPC8349E host CPU:
Toggled the interface LEDs on a DP83865 PHY.
Signed-off-by: Clifford Wolf <clifford@clifford.at>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julia Lawall [Fri, 9 Jan 2009 10:23:10 +0000 (10:23 +0000)]
drivers/net/wireless/libertas: move a dereference below a NULL test
In each case, if the NULL test is necessary, then the dereference should be
moved below the NULL test. I have also taken advantage of the availability
of the value of priv->dev in the subsequent calls to netif_stop_queue and
netif_carrier_off.
The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@@
type T;
expression E;
identifier i,fld;
statement S;
@@
- T i = E->fld;
+ T i;
... when != E
when != i
if (E == NULL) S
+ i = E->fld;
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julia Lawall [Fri, 9 Jan 2009 10:23:09 +0000 (10:23 +0000)]
drivers/net/hamradio/6pack.c: move a dereference below a NULL test
In each case, if the NULL test is necessary, then the dereference should be
moved below the NULL test.
The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@@
type T;
expression E;
identifier i,fld;
statement S;
@@
- T i = E->fld;
+ T i;
... when != E
when != i
if (E == NULL) S
+ i = E->fld;
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julia Lawall [Fri, 9 Jan 2009 10:22:53 +0000 (10:22 +0000)]
drivers/isdn/hardware/mISDN: move a dereference below a NULL test
In each case, if the NULL test is necessary, then the dereference should be
moved below the NULL test.
The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@@
type T;
expression E;
identifier i,fld;
statement S;
@@
- T i = E->fld;
+ T i;
... when != E
when != i
if (E == NULL) S
+ i = E->fld;
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julia Lawall [Fri, 9 Jan 2009 10:22:22 +0000 (10:22 +0000)]
net/bridge/netfilter: move a dereference below a NULL test
In each case, if the NULL test is necessary, then the dereference should be
moved below the NULL test.
The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@@
type T;
expression E;
identifier i,fld;
statement S;
@@
- T i = E->fld;
+ T i;
... when != E
when != i
if (E == NULL) S
+ i = E->fld;
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julia Lawall [Fri, 9 Jan 2009 10:22:21 +0000 (10:22 +0000)]
net/tipc/bcast.h: use ARRAY_SIZE
ARRAY_SIZE is more concise to use when the size of an array is divided by
the size of its type or the size of its first element.
The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@i@
@@
#include <linux/kernel.h>
@depends on i using "paren.iso"@
type T;
T[] E;
@@
- (sizeof(E)/sizeof(T))
+ ARRAY_SIZE(E)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Inaky Perez-Gonzalez [Fri, 9 Jan 2009 07:34:00 +0000 (07:34 +0000)]
wimax: fix typo in kernel-doc for debugfs_dentry in struct wimax_dev
The kernel-doc was referring to member @debufs_dentry instead of
@debugfs_dentry.
Reported by Randy Dunlap http://marc.info/?l=linux-netdev&m=
123147942302885&w=2
As well, escape the colon in the field's text description, as it is
causing the generated text to be erraticly broken up (with paragraphs
moved down). Could not find a reason why it is happening so, even when
other field descriptions use colons and work as expected.
Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert [Fri, 9 Jan 2009 03:53:17 +0000 (03:53 +0000)]
3c59x: Use device_set_wakeup_enable
Since dev->power.should_wakeup bit is used by the PCI core to
decide whether the device should wake up the system from sleep
states, set this bit by calling device_set_wakeup_enable().
This restores proper WOL for the 3c59x driver.
Reported-and-tested-by: Graeme Wilford <gwilford@gmail.com>
Reported-by: Gunnar Degnbol <degnbol@danbbs.dk>
Signed-off-by: Steffen Klassert <klassert@mathematik.tu-chemnitz.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Frank Blaschka [Fri, 9 Jan 2009 03:44:00 +0000 (03:44 +0000)]
qeth: fix usage of netdev_ops
Have separate netdev_ops for OSA and HiperSocket/TR.
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesper Dangaard Brouer [Fri, 9 Jan 2009 03:14:47 +0000 (03:14 +0000)]
qlge: Naming interrupt vectors
Name interrupt vectors according to the new naming standard, by Robert
Olsson and DaveM.
The qlge driver were very close to the new standard, thus the change
is kind of trivial.
Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk>
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Felix Fietkau [Fri, 9 Jan 2009 02:39:57 +0000 (02:39 +0000)]
b44: fix misalignment and wasted space in rx handling
Broadcom 4400 puts a header of configurable size (apparently needs
to be at least 28 bytes) in front of received packets. When handling
this, the previous code accidentally added the offset 30 *twice* for
the software and once for the hardware, thereby cancelling out the
IP alignment effect of the 30 byte padding and wasting an additional
30 bytes of memory per packet.
This patch fixes this problem and improves routing throughput by
about 30% on MIPS, where unaligned access is expensive.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Thu, 8 Jan 2009 21:27:06 +0000 (21:27 +0000)]
ipcomp: Remove spurious truesize increase
When I made ipcomp use frags, I forgot to take out the original
truesize update that was added for pskb_expand_head. As we no
longer expand the head of skb, that update should have been removed.
This bug is not related to the truesize warnings since we only
made it bigger than what it should've been.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Graham [Thu, 8 Jan 2009 16:03:29 +0000 (16:03 +0000)]
e1000e: Add process name to WARN message when detecting Mutex contention
Adds process name of the current mutex holder to the WARN message output
when the e1000e driver attempts to acquire the nvm_mutex and finds that
it is already being held. With this patch the WARN message indicates
both the process name of the current mutex holder and the process name of
the attempted acquisition, which together will help to identify the
contending codepaths.
Signed-off-by: David Graham <david.graham@intel.com>
Acked-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Thu, 8 Jan 2009 15:04:57 +0000 (15:04 +0000)]
r6040: bump release to 0.21
Bump version to 0.21 and release date to 09Jan2009.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Thu, 8 Jan 2009 15:04:50 +0000 (15:04 +0000)]
r6040: no longer mark r6040 as being experimental
We do not depend on EXPERIMENTAL and the driver is
not experimental, so remove this warning.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Thu, 8 Jan 2009 15:04:45 +0000 (15:04 +0000)]
r6040: generate random ethernet MAC address when not initialized
This patch makes the ethernet driver assign a random ethernet
MAC address when the bootloader does not set it.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Sat, 10 Jan 2009 07:19:26 +0000 (23:19 -0800)]
r6040: fix ifconfig down and freeing of tx/rx descriptors
This patch fixes warnings and such traces that appear when doing
an ifconfig down on the interface:
WARNING: at arch/x86/kernel/pci-dma.c:376 dma_free_coherent+0x40/0x7d()
Modules linked in:
Signed-off-by: Joe Chou <joe.chou@rdc.com.tw>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Beregalov [Fri, 9 Jan 2009 00:42:08 +0000 (16:42 -0800)]
irda: fix incomplete conversation to internal stats
Fix for commit
af0490810c (irda: convert to internal stats)
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 10 Jan 2009 23:43:05 +0000 (15:43 -0800)]
Linux 2.6.29-rc1
Arjan van de Ven [Sat, 10 Jan 2009 18:03:05 +0000 (10:03 -0800)]
bootgraph: make the bootgraph script show async waiting time
It is useful for diagnosing boot performance to see where async function
calls are waiting on serialization... this patch adds this
functionality to the bootgraph.pl script.
The waiting time is shown as a half transparent, gray bar through the
block that is waiting.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arjan van de Ven [Sat, 10 Jan 2009 18:18:44 +0000 (10:18 -0800)]
libata: only ports >= 0 need to synchronize
In a discussio with Jeff Garzik, he mentioned that the serialization
for the libata port probes only needs to be within the domain of a host.
This means that for the first port of each host (with ID 0), we don't
need to wait, so we can relax our serialization a little.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arjan van de Ven [Fri, 9 Jan 2009 23:54:07 +0000 (15:54 -0800)]
libata: Add a per-host flag to opt-in into parallel port probes
This patch adds a per host flag that allows drivers to opt in into
having its busses scanned in parallel.
Drivers that do not set this flag get their ports scanned in
the "original" sequence.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 10 Jan 2009 14:13:09 +0000 (06:13 -0800)]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (36 commits)
x86: fix section mismatch warnings in mcheck/mce_amd_64.c
x86: offer frame pointers in all build modes
x86: remove duplicated #include's
x86: k8 numa register active regions later
x86: update Alan Cox's email addresses
x86: rename all fields of mpc_table mpc_X to X
x86: rename all fields of mpc_oemtable oem_X to X
x86: rename all fields of mpc_bus mpc_X to X
x86: rename all fields of mpc_cpu mpc_X to X
x86: rename all fields of mpc_intsrc mpc_X to X
x86: rename all fields of mpc_lintsrc mpc_X to X
x86: rename all fields of mpc_iopic mpc_X to X
x86: irqinit_64.c init_ISA_irqs should be static
Documentation/x86/boot.txt: payload length was changed to payload_length
x86: setup_percpu.c fix style problems
x86: irqinit_64.c fix style problems
x86: irqinit_32.c fix style problems
x86: i8259.c fix style problems
x86: irq_32.c fix style problems
x86: ioport.c fix style problems
...
Linus Torvalds [Sat, 10 Jan 2009 14:12:18 +0000 (06:12 -0800)]
Merge branch 'cpus4096-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'cpus4096-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
[IA64] fix typo in cpumask_of_pcibus()
x86: fix x86_32 builds for summit and es7000 arch's
cpumask: use work_on_cpu in acpi-cpufreq.c for read_measured_perf_ctrs
cpumask: use work_on_cpu in acpi-cpufreq.c for drv_read and drv_write
cpumask: use cpumask_var_t in acpi-cpufreq.c
cpumask: use work_on_cpu in acpi/cstate.c
cpumask: convert struct cpufreq_policy to cpumask_var_t
cpumask: replace CPUMASK_ALLOC etc with cpumask_var_t
x86: cleanup remaining cpumask_t ops in smpboot code
cpumask: update pci_bus_show_cpuaffinity to use new cpumask API
cpumask: update local_cpus_show to use new cpumask API
ia64: cpumask fix for is_affinity_mask_valid()
Linus Torvalds [Sat, 10 Jan 2009 14:09:52 +0000 (06:09 -0800)]
btrfs: fix for write_super_lockfs/unlockfs error handling
Commit
c4be0c1dc4cdc37b175579be1460f15ac6495e9a added the ability for
write_super_lockfs to return errors, and renamed them to match. But
btrfs didn't get converted.
Do the minimal conversion to make it compile again.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Artem Bityutskiy [Sat, 10 Jan 2009 11:12:09 +0000 (11:12 +0000)]
rbtree: add const qualifier to some functions
The 'rb_first()', 'rb_last()', 'rb_next()' and 'rb_prev()' calls
take a pointer to an RB node or RB root. They do not change the
pointed objects, so add a 'const' qualifier in order to make life
of the users of these functions easier.
Indeed, if I have my own constant pointer &const struct my_type *p,
and I call 'rb_next(&p->rb)', I get a GCC warning:
warning: passing argument 1 of ‘rb_next’ discards qualifiers from pointer target type
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Piel [Sat, 10 Jan 2009 00:41:01 +0000 (16:41 -0800)]
LIS3LV02D: separate the core from HP ACPI API
The sensor can be accessed via various buses. In particular, SPI, I²C
and, on HP laptops, via a specific ACPI API (the only one currently
supported). Separate this latest platform from the core of the sensor
driver to allow support for the other bus type. The second, and more
direct goal is actually to be able to merge this part with the
hp-disk-leds driver, which has the same ACPI PNP number.
Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Takashi Sato [Sat, 10 Jan 2009 00:41:00 +0000 (16:41 -0800)]
filesystem freeze: remove XFS specific ioctl interfaces for freeze feature
It removes XFS specific ioctl interfaces and request codes
for freeze feature.
This patch has been supplied by David Chinner.
Signed-off-by: Dave Chinner <dgc@sgi.com>
Signed-off-by: Takashi Sato <t-sato@yk.jp.nec.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: <xfs-masters@oss.sgi.com>
Cc: <linux-ext4@vger.kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Alasdair G Kergon <agk@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Takashi Sato [Sat, 10 Jan 2009 00:40:59 +0000 (16:40 -0800)]
filesystem freeze: implement generic freeze feature
The ioctls for the generic freeze feature are below.
o Freeze the filesystem
int ioctl(int fd, int FIFREEZE, arg)
fd: The file descriptor of the mountpoint
FIFREEZE: request code for the freeze
arg: Ignored
Return value: 0 if the operation succeeds. Otherwise, -1
o Unfreeze the filesystem
int ioctl(int fd, int FITHAW, arg)
fd: The file descriptor of the mountpoint
FITHAW: request code for unfreeze
arg: Ignored
Return value: 0 if the operation succeeds. Otherwise, -1
Error number: If the filesystem has already been unfrozen,
errno is set to EINVAL.
[akpm@linux-foundation.org: fix CONFIG_BLOCK=n]
Signed-off-by: Takashi Sato <t-sato@yk.jp.nec.com>
Signed-off-by: Masayuki Hamaguchi <m-hamaguchi@ys.jp.nec.com>
Cc: <xfs-masters@oss.sgi.com>
Cc: <linux-ext4@vger.kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Alasdair G Kergon <agk@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Takashi Sato [Sat, 10 Jan 2009 00:40:58 +0000 (16:40 -0800)]
filesystem freeze: add error handling of write_super_lockfs/unlockfs
Currently, ext3 in mainline Linux doesn't have the freeze feature which
suspends write requests. So, we cannot take a backup which keeps the
filesystem's consistency with the storage device's features (snapshot and
replication) while it is mounted.
In many case, a commercial filesystem (e.g. VxFS) has the freeze feature
and it would be used to get the consistent backup.
If Linux's standard filesystem ext3 has the freeze feature, we can do it
without a commercial filesystem.
So I have implemented the ioctls of the freeze feature.
I think we can take the consistent backup with the following steps.
1. Freeze the filesystem with the freeze ioctl.
2. Separate the replication volume or create the snapshot
with the storage device's feature.
3. Unfreeze the filesystem with the unfreeze ioctl.
4. Take the backup from the separated replication volume
or the snapshot.
This patch:
VFS:
Changed the type of write_super_lockfs and unlockfs from "void"
to "int" so that they can return an error.
Rename write_super_lockfs and unlockfs of the super block operation
freeze_fs and unfreeze_fs to avoid a confusion.
ext3, ext4, xfs, gfs2, jfs:
Changed the type of write_super_lockfs and unlockfs from "void"
to "int" so that write_super_lockfs returns an error if needed,
and unlockfs always returns 0.
reiserfs:
Changed the type of write_super_lockfs and unlockfs from "void"
to "int" so that they always return 0 (success) to keep a current behavior.
Signed-off-by: Takashi Sato <t-sato@yk.jp.nec.com>
Signed-off-by: Masayuki Hamaguchi <m-hamaguchi@ys.jp.nec.com>
Cc: <xfs-masters@oss.sgi.com>
Cc: <linux-ext4@vger.kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Alasdair G Kergon <agk@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Harvey Harrison [Sat, 10 Jan 2009 00:40:56 +0000 (16:40 -0800)]
memstick: annotate endianness of attribute structs
The code was shifting the endianness appropriately everywhere, annotate
the structs to avoid the sparse warnings when assigning the endian types
to the struct members, or passing them to be[16|32]_to_cpu:
drivers/memstick/core/mspro_block.c:331:4: warning: cast to restricted __be16
drivers/memstick/core/mspro_block.c:333:4: warning: cast to restricted __be16
drivers/memstick/core/mspro_block.c:335:4: warning: cast to restricted __be16
drivers/memstick/core/mspro_block.c:337:4: warning: cast to restricted __be16
drivers/memstick/core/mspro_block.c:341:4: warning: cast to restricted __be16
drivers/memstick/core/mspro_block.c:347:4: warning: cast to restricted __be32
drivers/memstick/core/mspro_block.c:356:4: warning: cast to restricted __be16
drivers/memstick/core/mspro_block.c:358:4: warning: cast to restricted __be16
drivers/memstick/core/mspro_block.c:364:4: warning: cast to restricted __be16
drivers/memstick/core/mspro_block.c:367:4: warning: cast to restricted __be16
drivers/memstick/core/mspro_block.c:369:4: warning: cast to restricted __be16
drivers/memstick/core/mspro_block.c:371:4: warning: cast to restricted __be16
drivers/memstick/core/mspro_block.c:377:4: warning: cast to restricted __be16
drivers/memstick/core/mspro_block.c:478:4: warning: cast to restricted __be16
drivers/memstick/core/mspro_block.c:480:4: warning: cast to restricted __be16
drivers/memstick/core/mspro_block.c:482:4: warning: cast to restricted __be16
drivers/memstick/core/mspro_block.c:484:4: warning: cast to restricted __be16
drivers/memstick/core/mspro_block.c:486:4: warning: cast to restricted __be16
drivers/memstick/core/mspro_block.c:689:22: expected unsigned int [unsigned] [assigned] data_address
drivers/memstick/core/mspro_block.c:689:22: got restricted __be32 [usertype] <noident>
drivers/memstick/core/mspro_block.c:697:3: warning: cast to restricted __be32
drivers/memstick/core/mspro_block.c:960:17: warning: incorrect type in initializer (different base types)
drivers/memstick/core/mspro_block.c:960:17: expected unsigned short [unsigned] data_count
drivers/memstick/core/mspro_block.c:960:17: got restricted __be16 [usertype] <noident>
drivers/memstick/core/mspro_block.c:993:6: warning: cast to restricted __be16
drivers/memstick/core/mspro_block.c:995:28: warning: cast to restricted __be16
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Larry Finger [Sat, 10 Jan 2009 00:40:54 +0000 (16:40 -0800)]
hp-wmi: handle rfkill_register() failure
Compilation of the HP WMI hotkeys code results in the following:
CC [M] drivers/platform/x86/hp-wmi.o
drivers/platform/x86/hp-wmi.c: In function hp_wmi_bios_setup:
drivers/platform/x86/hp-wmi.c:431: warning: ignoring return value of rfkill_register,
declared with attribute warn_unused_result
drivers/platform/x86/hp-wmi.c:441: warning: ignoring return value of rfkill_register,
declared with attribute warn_unused_result
drivers/platform/x86/hp-wmi.c:450: warning: ignoring return value of rfkill_register,
declared with attribute warn_unused_result
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andi Kleen [Sat, 10 Jan 2009 00:40:53 +0000 (16:40 -0800)]
compiler-gcc.h: add more comments to RELOC_HIDE
Requested by C. Lameter
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Mike Travis <travis@sgi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Brownell [Sat, 10 Jan 2009 00:40:52 +0000 (16:40 -0800)]
CORE_DUMP_DEFAULT_ELF_HEADERS depends on ELF_CORE
Kernels that don't support ELF coredumps at all surely can't be supporting
new partial-segment flavored ELF coredumps ... don't make folk answer
Kconfig questions about that flavor.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 9 Jan 2009 23:32:26 +0000 (15:32 -0800)]
Merge git://git./linux/kernel/git/arjan/linux-2.6-async-2
* git://git.kernel.org/pub/scm/linux/kernel/git/arjan/linux-2.6-async-2:
async: make async a command line option for now
partial revert of asynchronous inode delete
Linus Torvalds [Fri, 9 Jan 2009 23:30:54 +0000 (15:30 -0800)]
Merge git://git./linux/kernel/git/gregkh/driver-core-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
Revert "driver core: create a private portion of struct device"
Revert "driver core: move klist_children into private structure"
Revert "driver core: move knode_driver into private structure"
Revert "driver core: move knode_bus into private structure"
Linus Torvalds [Fri, 9 Jan 2009 23:30:30 +0000 (15:30 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ieee1394/linux1394-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
firewire: core: fix sleep in atomic context due to driver core change
Linus Torvalds [Fri, 9 Jan 2009 23:29:04 +0000 (15:29 -0800)]
Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6:
[JFFS2] remove junk prototypes
Linus Torvalds [Fri, 9 Jan 2009 23:27:39 +0000 (15:27 -0800)]
Merge branch 'for_2.6.29' of git://git./linux/kernel/git/kkeil/ISDN-2.6
* 'for_2.6.29' of git://git.kernel.org/pub/scm/linux/kernel/git/kkeil/ISDN-2.6: (28 commits)
mISDN: Add HFC USB driver
mISDN: Add layer1 prim MPH_INFORMATION_REQ
mISDN: Fix kernel crash when doing hardware conference with more than two members
mISDN: Added missing create_l1() call
mISDN: Add MODULE_DEVICE_TABLE() to hfcpci
mISDN: Minor cleanups
mISDN: Create /sys/class/mISDN
mISDN: Add missing release functions
mISDN: Add different different timer settings for hfc-pci
mISDN: Minor fixes
mISDN: Correct busy device detection
mISDN: Fix deactivation, if peer IP is removed from l1oip instance.
mISDN: Add ISDN_P_TE_UP0 / ISDN_P_NT_UP0
mISDN: Fix irq detection
mISDN: Add ISDN sample clock API to mISDN core
mISDN: Return error on E-channel access
mISDN: Add E-Channel logging features
mISDN: Use protocol to detect D-channel
mISDN: Fixed more indexing bugs
mISDN: Make debug output a little bit more verbose
...
Linus Torvalds [Fri, 9 Jan 2009 23:18:49 +0000 (15:18 -0800)]
Merge git://git./linux/kernel/git/pkl/squashfs-linus
* git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linus:
MAINTAINERS: squashfs entry
Squashfs: documentation
Squashfs: initrd support
Squashfs: Kconfig entry
Squashfs: Makefiles
Squashfs: header files
Squashfs: block operations
Squashfs: cache operations
Squashfs: uid/gid lookup operations
Squashfs: fragment block operations
Squashfs: export operations
Squashfs: super block operations
Squashfs: symlink operations
Squashfs: regular file operations
Squashfs: directory readdir operations
Squashfs: directory lookup operations
Squashfs: inode operations
Greg Kroah-Hartman [Fri, 9 Jan 2009 23:06:12 +0000 (15:06 -0800)]
Revert "driver core: create a private portion of struct device"
This reverts commit
2831fe6f9cc4e16c103504ee09a47a084297c0f3.
Turns out that device_initialize shouldn't fail silently.
This series needs to be reworked in order to get into proper
shape.
Reported-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Fri, 9 Jan 2009 22:55:37 +0000 (14:55 -0800)]
Revert "driver core: move klist_children into private structure"
This reverts commit
11c3b5c3e08f4d855cbef52883c266b9ab9df879.
Turns out that device_initialize shouldn't fail silently.
This series needs to be reworked in order to get into proper
shape.
Reported-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Fri, 9 Jan 2009 22:44:18 +0000 (14:44 -0800)]
Revert "driver core: move knode_driver into private structure"
This reverts commit
93e746db183b3bdbbda67900f79b5835f9cb388f.
Turns out that device_initialize shouldn't fail silently.
This series needs to be reworked in order to get into proper
shape.
Reported-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Fri, 9 Jan 2009 22:32:46 +0000 (14:32 -0800)]
Revert "driver core: move knode_bus into private structure"
This reverts commit
b9daa99ee533578e3f88231e7a16784dcb44ec42.
Turns out that device_initialize shouldn't fail silently.
This series needs to be reworked in order to get into proper
shape.
Reported-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Stefan Richter [Fri, 9 Jan 2009 19:49:37 +0000 (20:49 +0100)]
firewire: core: fix sleep in atomic context due to driver core change
Due to commit
2831fe6f9cc4e16c103504ee09a47a084297c0f3, "driver core:
create a private portion of struct device", device_initialize() can no
longer be called from atomic contexts.
We now defer it until after config ROM probing. This requires changes
to the bus manager code because this may use a device before it was
probed.
Reported-by: Jay Fenlason <fenlason@redhat.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Linus Torvalds [Fri, 9 Jan 2009 22:00:58 +0000 (14:00 -0800)]
Merge git://git./linux/kernel/git/dhowells/linux-2.6-nommu
* git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-nommu:
NOMMU: Support XIP on initramfs
NOMMU: Teach kobjsize() about VMA regions.
FLAT: Don't attempt to expand the userspace stack to fill the space allocated
FDPIC: Don't attempt to expand the userspace stack to fill the space allocated
NOMMU: Improve procfs output using per-MM VMAs
NOMMU: Make mmap allocation page trimming behaviour configurable.
NOMMU: Make VMAs per MM as for MMU-mode linux
NOMMU: Delete askedalloc and realalloc variables
NOMMU: Rename ARM's struct vm_region
NOMMU: Fix cleanup handling in ramfs_nommu_get_umapped_area()
Linus Torvalds [Fri, 9 Jan 2009 21:59:25 +0000 (13:59 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/security-testing-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
CRED: Fix commit_creds() on a process that has no mm
Linus Torvalds [Fri, 9 Jan 2009 21:56:06 +0000 (13:56 -0800)]
Merge branch 'for-linus' of git://git390.osdl.marist.edu/linux-2.6
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
[S390] update documentation for hvc_iucv kernel parameter.
[S390] hvc_iucv: Special handling of IUCV HVC devices
[S390] hvc_iucv: Refactor console and device initialization
[S390] hvc_iucv: Update function documentation
[S390] hvc_iucv: Limit rate of outgoing IUCV messages
[S390] hvc_iucv: Change IUCV term id and use one device as default
[S390] Use unsigned long long for u64 on 64bit.
[S390] qdio: fix broken pointer in case of CONFIG_DEBUG_FS is disabled
[S390] vdso: compile fix
[S390] remove code for oldselect system call
[S390] types: add/fix types.h include in header files
[S390] dasd: add device attribute to disable blocking on lost paths
[S390] dasd: send change uevents for dasd block devices
[S390] tape block: fix dependencies
[S390] asm-s390/posix_types.h: drop __USE_ALL usage
[S390] gettimeofday.S: removed duplicated #includes
[S390] ptrace: no extern declarations for userspace