OSDN Git Service
Eduardo Habkost [Mon, 30 Nov 2015 14:56:37 +0000 (12:56 -0200)]
pc: Change indentation of PC_COMPAT_* to 4 spaces
Cosmetic change only.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Eduardo Habkost [Mon, 30 Nov 2015 14:56:36 +0000 (12:56 -0200)]
pc: Add pc-*-2.6 machine classes
Add pc-i440fx-2.6 and pc-q35-2.6 machine classes.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Eduardo Habkost [Mon, 30 Nov 2015 14:56:35 +0000 (12:56 -0200)]
pc: Remove redundant code from pc-*-2.3 machine classes
Remove the redundant 'alias = NULL' and 'is_default = 0' lines
from older machine-types. pc_*_2_4_machine_options() already
clear those fields, so they don't need to be cleared by
pc_*_2_3_machine_options().
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Gerd Hoffmann [Thu, 17 Dec 2015 10:40:49 +0000 (11:40 +0100)]
q35: skip q35-acpi-dsdt.aml load if not needed
Only old machine types which don't use the acpi builder (qemu 1.7 + older)
have to load that file for proper acpi support.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Corey Minyard [Thu, 17 Dec 2015 18:50:19 +0000 (12:50 -0600)]
ipmi: Add a force off function
Allow the IPMI interface to request a forced power off.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Corey Minyard [Thu, 17 Dec 2015 18:50:13 +0000 (12:50 -0600)]
ipmi: Add firmware registration to the ISA interface
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Corey Minyard [Thu, 17 Dec 2015 18:50:12 +0000 (12:50 -0600)]
ipmi: Add a firmware configuration repository
Add a way for IPMI devices to register their firmware information
with the IPMI subsystem so that various firmware entities can pull
that information later for adding to firmware tables.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Corey Minyard [Thu, 17 Dec 2015 18:50:11 +0000 (12:50 -0600)]
ipmi: Add migration capability to the IPMI devices.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Corey Minyard [Thu, 17 Dec 2015 18:50:10 +0000 (12:50 -0600)]
ipmi: Add documentation
Add some basic documentation for the IPMI device.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Corey Minyard [Thu, 17 Dec 2015 18:50:09 +0000 (12:50 -0600)]
ipmi: Add tests
Test the KCS interface with a local BMC and a BT interface with an
external BMC.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Corey Minyard [Thu, 17 Dec 2015 18:50:08 +0000 (12:50 -0600)]
ipmi: Add a BT low-level interface
This provides the simulation of the BT hardware interface for
IPMI.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Corey Minyard [Thu, 17 Dec 2015 18:50:07 +0000 (12:50 -0600)]
ipmi: Add an ISA KCS low-level interface
This provides the simulation of the KCS hardware interface.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Corey Minyard [Thu, 17 Dec 2015 18:50:06 +0000 (12:50 -0600)]
ipmi: Add an external connection simulation interface
This adds an interface for IPMI that connects to a remote
BMC over a chardev (generally a TCP socket). The OpenIPMI
lanserv simulator describes this interface, see that for
interface details.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Corey Minyard [Thu, 17 Dec 2015 18:50:05 +0000 (12:50 -0600)]
ipmi: Add a local BMC simulation
This provides a minimal local BMC, basically enough to comply with the
spec and provide a complete watchdog timer (including a sensor, SDR,
and event).
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Corey Minyard [Thu, 17 Dec 2015 18:50:04 +0000 (12:50 -0600)]
Add a base IPMI interface
Add the basic IPMI types and infrastructure to QEMU. Low-level
interfaces and simulation interfaces will register with this; it's
kind of the go-between to tie them together.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Eduardo Habkost [Fri, 11 Dec 2015 18:42:21 +0000 (16:42 -0200)]
pc: Group and document related PCMachineState/PCMachineclass fields
Group related PCMachineState and PCMachineClass fields into
sections, and move existing field descriptions to doc comments.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Eduardo Habkost [Fri, 11 Dec 2015 18:42:20 +0000 (16:42 -0200)]
q35: Remove MCHPCIState.guest_info field
The field is not used for anything.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Marcel Apfelbaum [Thu, 26 Nov 2015 16:00:28 +0000 (18:00 +0200)]
hw/i386: extend pxb query for all PC machines
Add bus property to PC machines and use it when looking
for primary PCI root bus (bus 0).
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Marcel Apfelbaum [Thu, 26 Nov 2015 16:00:27 +0000 (18:00 +0200)]
hw/pxb: introduce pxb-pcie expander for PCIe machines
The pxb-pcie is the counterpart of pxb for PCI express machines.
The new device re-uses the pxb code, but appears to the guests
as a different device. The pxb-pcie device does not have an internal
pci-pci bridge and exposes a PCIe root bus instead of a PCI one.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Marcel Apfelbaum [Thu, 26 Nov 2015 16:00:26 +0000 (18:00 +0200)]
hw/acpi: merge pxb adjacent memory/IO ranges
A generic PCI Bus Expander doesn't necessary have a built-in PCI bridge.
Int this case the ACPI will include IO/MEM ranges per device. Try to merge
adjacent resources to reduce the ACPI tables length.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Eduardo Habkost [Tue, 1 Dec 2015 22:58:08 +0000 (20:58 -0200)]
pc: Move option_rom_has_mr/rom_file_has_mr globals to MachineClass
This way, these settings can be simply set on the corresponding
machine_options() function, instead of requiring code in
pc_compat_*() functions.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Eduardo Habkost [Tue, 1 Dec 2015 22:58:07 +0000 (20:58 -0200)]
pc: Remove enforce-aligned-dimm QOM property
The property is read-only and not used for anything.
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Eduardo Habkost [Tue, 1 Dec 2015 22:58:06 +0000 (20:58 -0200)]
pc: Move enforce_aligned_dimm to PCMachineClass
enforce_aligned_dimm never changes after the machine is
initialized, so it can be simply set in PCMachineClass like all
the other compat fields.
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Eduardo Habkost [Tue, 1 Dec 2015 22:58:05 +0000 (20:58 -0200)]
pc: Move acpi_data_size global to PCMachineClass
This way we don't need code in pc_compat_*() functions to set the legacy
acpi_data_size value.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Eduardo Habkost [Tue, 1 Dec 2015 22:58:04 +0000 (20:58 -0200)]
pc: Move legacy_acpi_table_size global to PCMachineClass
This way we can set legacy_acpi_table_size on the machine_options()
functions, instead of requirng code in pc_compat_*() functions.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Eduardo Habkost [Tue, 1 Dec 2015 22:58:03 +0000 (20:58 -0200)]
pc: Move compat boolean globals to PCMachineClass
This way the compat flags can be initialized in the machine_options()
function. This will help us to eventually eliminate the pc_compat_*()
functions.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Michael S. Tsirkin [Thu, 3 Dec 2015 08:35:31 +0000 (10:35 +0200)]
mmap-alloc: tweak a comment on ppc64
The comment I put in mmap-alloc to document the ppc64 rules
refers to the previous revision of the patch:
we don't look at memory alignment anymore, we check
the fs from which the fd is mapped, instead.
It's also not clear what does "in this case" refer
to, rearrange text to make it clearer.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Peter Maydell [Tue, 22 Dec 2015 14:21:42 +0000 (14:21 +0000)]
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
# gpg: Signature made Tue 22 Dec 2015 08:52:55 GMT using RSA key ID
81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/block-pull-request:
sdhci: add optional quirk property to disable card insertion/removal interrupts
sdhci: don't raise a command index error for an unexpected response
sd: sdhci: Delete over-zealous power check
scripts/gdb: Fix a python exception in mtree.py
parallels: add format spec
block/mirror: replace IOV_MAX with blk_get_max_iov()
block: replace IOV_MAX with BlockLimits.max_iov
block-backend: add blk_get_max_iov()
block: add BlockLimits.max_iov field
virtio-blk: trivial code optimization
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Andrew Baumann [Mon, 21 Dec 2015 22:47:49 +0000 (14:47 -0800)]
sdhci: add optional quirk property to disable card insertion/removal interrupts
This is needed for a quirk of the Raspberry Pi (bcm2835/6) MMC
controller, where the card insert bit is documented as unimplemented
(always reads zero, doesn't generate interrupts) but is in fact
observed on hardware as set at power on, but is cleared (and remains
clear) on subsequent controller resets.
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id:
1450738069-18664-4-git-send-email-Andrew.Baumann@microsoft.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Andrew Baumann [Mon, 21 Dec 2015 22:47:48 +0000 (14:47 -0800)]
sdhci: don't raise a command index error for an unexpected response
This deletes a block of code that raised a command index error if a
command returned response data, but the guest did not set the
appropriate bits in the response register to handle such a response. I
cannot find any documentation that suggests the controller should
behave in this way, the error code doesn't make sense (command index
error is defined for the case where the index in a response does not
match that of the issued command), and in at least one case (CMD23
issued by UEFI on Raspberry Pi 2), actual hardware does not do this.
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id:
1450738069-18664-3-git-send-email-Andrew.Baumann@microsoft.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Peter Crosthwaite [Mon, 21 Dec 2015 22:47:47 +0000 (14:47 -0800)]
sd: sdhci: Delete over-zealous power check
This check was conditionalising SD card operation on the card being
powered by the SDHCI host controller. It is however possible
(particularly in embedded systems) for the power control of the SD card
to be managed outside of SDHCI. This can be as trivial as hard-wiring
the SD slot VCC to a constant power-rail.
This means the guest SDHCI can validly opt-out of the SDHCI power
control feature while still using the card. So delete this check to
allow operation of the card with SDHCI power control.
This is needed for at least Xilinx Zynq and Raspberry Pi, and
also makes Freescale i.MX25 work for me. The digilent Zybo board
has a public schematic which shows SD VCC hardwiring:
http://digilentinc.com/Data/Products/ZYBO/ZYBO_sch_VB.3.pdf
bottom of page 3.
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Sai Pavan Boddu <saipava@xilinx.com>
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-id:
1450738069-18664-2-git-send-email-Andrew.Baumann@microsoft.com
[AB: Add Pi to list of devices fixed in commit message]
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Yang Wei [Sat, 5 Dec 2015 11:52:20 +0000 (19:52 +0800)]
scripts/gdb: Fix a python exception in mtree.py
The following exception is threw:
Python Exception <class 'NameError'> name 'long' is not defined:
Error occurred in Python command: name 'long' is not defined
Python 2.4+, int()/long() have been unified, so replace long
with int.
Signed-off-by: Yang Wei <w90p710@gmail.com>
Message-id:
1449316340-4030-1-git-send-email-w90p710@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Vladimir Sementsov-Ogievskiy [Fri, 27 Nov 2015 12:20:06 +0000 (15:20 +0300)]
parallels: add format spec
This specifies Parallels image format as implemented in Parallels Cloud
Server 6.10
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Message-id:
1448626806-17591-1-git-send-email-den@openvz.org
CC: Eric Blake <eblake@redhat.com>
CC: John Snow <jsnow@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Thu, 9 Jul 2015 09:56:47 +0000 (10:56 +0100)]
block/mirror: replace IOV_MAX with blk_get_max_iov()
Use blk_get_max_iov() instead of hardcoding IOV_MAX, which may not apply
to all BlockDrivers.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Thu, 9 Jul 2015 09:56:46 +0000 (10:56 +0100)]
block: replace IOV_MAX with BlockLimits.max_iov
Request merging must not result in a huge request that exceeds the
maximum number of iovec elements. Use BlockLimits.max_iov instead of
hardcoding IOV_MAX.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Thu, 9 Jul 2015 09:56:45 +0000 (10:56 +0100)]
block-backend: add blk_get_max_iov()
Add a function to query BlockLimits.max_iov.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Thu, 9 Jul 2015 09:56:44 +0000 (10:56 +0100)]
block: add BlockLimits.max_iov field
The maximum number of struct iovec elements depends on the
BlockDriverState. The raw-posix and iSCSI protocols have a maximum of
IOV_MAX but others could have different values.
Cc: Peter Lieven <pl@kamp.de>
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Gonglei [Wed, 11 Nov 2015 01:59:26 +0000 (09:59 +0800)]
virtio-blk: trivial code optimization
1. avoid possible superflous checking
2. make code more robustness
["make code more robustness" refers to avoiding integer
underflows/overflows.
--Stefan]
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Message-id:
1447207166-12612-1-git-send-email-arei.gonglei@huawei.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Peter Maydell [Fri, 18 Dec 2015 18:47:17 +0000 (18:47 +0000)]
Merge remote-tracking branch 'remotes/ehabkost/tags/numa-pull-request' into staging
NUMA queue, 2015-12-18
# gpg: Signature made Fri 18 Dec 2015 17:53:48 GMT using RSA key ID
984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
* remotes/ehabkost/tags/numa-pull-request:
numa: Clean up query-memdev error handling
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Markus Armbruster [Mon, 23 Nov 2015 08:35:31 +0000 (09:35 +0100)]
numa: Clean up query-memdev error handling
qmp_query_memdev() has two error paths:
* When object_get_objects_root() returns null. It never does, so
simply drop the useless error handling.
* When query_memdev() fails. It leaks err then. But any failure
there is actually a programming error. Switch it to &error_abort,
and drop the useless error handling.
Messed up in commit
76b5d85 "qmp: add query-memdev".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Peter Maydell [Fri, 18 Dec 2015 17:04:15 +0000 (17:04 +0000)]
Merge remote-tracking branch 'remotes/berrange/tags/pull-qcrypto-secrets-base-2015-12-18-1' into staging
Merge QCryptoSecret object support
# gpg: Signature made Fri 18 Dec 2015 16:51:21 GMT using RSA key ID
15104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>"
* remotes/berrange/tags/pull-qcrypto-secrets-base-2015-12-18-1:
crypto: add support for loading encrypted x509 keys
crypto: add QCryptoSecret object class for password/key handling
qga: convert to use error checked base64 decode
qemu-char: convert to use error checked base64 decode
util: add base64 decoding function
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 18 Dec 2015 16:34:44 +0000 (16:34 +0000)]
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Fri 18 Dec 2015 13:41:03 GMT using RSA key ID
C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (48 commits)
block/qapi: allow best-effort query
qemu-img: abort when full_backing_filename not present
block/qapi: explicitly warn if !has_full_backing_filename
block/qapi: always report full_backing_filename
block/qapi: do not redundantly print "actual path"
qemu-iotests: s390x: fix test 068
qemu-iotests: s390x: fix test 051
qemu-iotests: refine common.config
block: fix bdrv_ioctl called from coroutine
block: use drained section around bdrv_snapshot_delete
iotests: Update comments for bdrv_swap() in 094
block: Remove prototype of bdrv_swap from header
raw-posix: Make aio=native option binding
qcow2: insert assert into qcow2_get_specific_info()
iotests: Extend test 112 for qemu-img amend
qcow2: Point to amend function in check
qcow2: Invoke refcount order amendment function
qcow2: Add function for refcount order amendment
qcow2: Use intermediate helper CB for amend
qcow2: Split upgrade/downgrade paths for amend
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Daniel P. Berrange [Thu, 15 Oct 2015 15:14:42 +0000 (16:14 +0100)]
crypto: add support for loading encrypted x509 keys
Make use of the QCryptoSecret object to support loading of
encrypted x509 keys. The optional 'passwordid' parameter
to the tls-creds-x509 object type, provides the ID of a
secret object instance that holds the decryption password
for the PEM file.
# printf "123456" > mypasswd.txt
# $QEMU \
-object secret,id=sec0,filename=mypasswd.txt \
-object tls-creds-x509,passwordid=sec0,id=creds0,\
dir=/home/berrange/.pki/qemu,endpoint=server \
-vnc :1,tls-creds=creds0
This requires QEMU to be linked to GNUTLS >= 3.1.11. If
GNUTLS is too old an error will be reported if an attempt
is made to pass a decryption password.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Daniel P. Berrange [Wed, 14 Oct 2015 08:58:38 +0000 (09:58 +0100)]
crypto: add QCryptoSecret object class for password/key handling
Introduce a new QCryptoSecret object class which will be used
for providing passwords and keys to other objects which need
sensitive credentials.
The new object can provide secret values directly as properties,
or indirectly via a file. The latter includes support for file
descriptor passing syntax on UNIX platforms. Ordinarily passing
secret values directly as properties is insecure, since they
are visible in process listings, or in log files showing the
CLI args / QMP commands. It is possible to use AES-256-CBC to
encrypt the secret values though, in which case all that is
visible is the ciphertext. For ad hoc developer testing though,
it is fine to provide the secrets directly without encryption
so this is not explicitly forbidden.
The anticipated scenario is that libvirtd will create a random
master key per QEMU instance (eg /var/run/libvirt/qemu/$VMNAME.key)
and will use that key to encrypt all passwords it provides to
QEMU via '-object secret,....'. This avoids the need for libvirt
(or other mgmt apps) to worry about file descriptor passing.
It also makes life easier for people who are scripting the
management of QEMU, for whom FD passing is significantly more
complex.
Providing data inline (insecure, only for ad hoc dev testing)
$QEMU -object secret,id=sec0,data=letmein
Providing data indirectly in raw format
printf "letmein" > mypasswd.txt
$QEMU -object secret,id=sec0,file=mypasswd.txt
Providing data indirectly in base64 format
$QEMU -object secret,id=sec0,file=mykey.b64,format=base64
Providing data with encryption
$QEMU -object secret,id=master0,file=mykey.b64,format=base64 \
-object secret,id=sec0,data=[base64 ciphertext],\
keyid=master0,iv=[base64 IV],format=base64
Note that 'format' here refers to the format of the ciphertext
data. The decrypted data must always be in raw byte format.
More examples are shown in the updated docs.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Daniel P. Berrange [Mon, 23 Nov 2015 15:37:07 +0000 (15:37 +0000)]
qga: convert to use error checked base64 decode
Switch from using g_base64_decode over to qbase64_decode
in order to get error checking of the base64 input data.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Daniel P. Berrange [Mon, 23 Nov 2015 15:29:59 +0000 (15:29 +0000)]
qemu-char: convert to use error checked base64 decode
Switch from using g_base64_decode over to qbase64_decode
in order to get error checking of the base64 input data.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Daniel P. Berrange [Mon, 23 Nov 2015 15:24:50 +0000 (15:24 +0000)]
util: add base64 decoding function
The standard glib provided g_base64_decode doesn't provide any
kind of sensible error checking on its input. Add a QEMU custom
wrapper qbase64_decode which can be used with untrustworthy
input that can contain invalid base64 characters, embedded
NUL characters, or not be NUL terminated at all.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Peter Maydell [Fri, 18 Dec 2015 16:04:31 +0000 (16:04 +0000)]
Merge remote-tracking branch 'remotes/berrange/tags/pull-io-channel-vnc-2015-12-18-1' into staging
Merge VNC conversion to I/O channels
# gpg: Signature made Fri 18 Dec 2015 15:44:30 GMT using RSA key ID
15104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>"
* remotes/berrange/tags/pull-io-channel-vnc-2015-12-18-1:
ui: convert VNC server to use QIOChannelWebsock
ui: convert VNC server to use QIOChannelTLS
ui: convert VNC server to use QIOChannelSocket
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 18 Dec 2015 15:32:32 +0000 (15:32 +0000)]
Merge remote-tracking branch 'remotes/sstabellini/tags/xsa155' into staging
XSA-155 fixes
# gpg: Signature made Fri 18 Dec 2015 15:16:18 GMT using RSA key ID
70E1AE90
# gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>"
* remotes/sstabellini/tags/xsa155:
xenfb: avoid reading twice the same fields from the shared page
xen/blkif: Avoid double access to src->nr_segments
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Stefano Stabellini [Fri, 18 Dec 2015 15:10:09 +0000 (15:10 +0000)]
xenfb: avoid reading twice the same fields from the shared page
Reading twice the same field could give the guest an attack of
opportunity. In the case of event->type, gcc could compile the switch
statement into a jump table, effectively ending up reading the type
field multiple times.
This is part of XSA-155.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Stefano Stabellini [Fri, 18 Dec 2015 15:09:58 +0000 (15:09 +0000)]
xen/blkif: Avoid double access to src->nr_segments
src is stored in shared memory and src->nr_segments is dereferenced
twice at the end of the function. If a compiler decides to compile this
into two separate memory accesses then the size limitation could be
bypassed.
Fix it by removing the double access to src->nr_segments.
This is part of XSA-155.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Daniel P. Berrange [Wed, 11 Mar 2015 15:53:49 +0000 (15:53 +0000)]
ui: convert VNC server to use QIOChannelWebsock
Remove custom websock handling code from the VNC server and use
the QIOChannelWebsock class instead.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Daniel P. Berrange [Mon, 2 Mar 2015 19:01:05 +0000 (19:01 +0000)]
ui: convert VNC server to use QIOChannelTLS
Switch VNC server over to using the QIOChannelTLS object for
the TLS session. This removes all remaining VNC specific code
for dealing with TLS handshakes.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Daniel P. Berrange [Fri, 27 Feb 2015 16:20:57 +0000 (16:20 +0000)]
ui: convert VNC server to use QIOChannelSocket
The minimal first step conversion to use QIOChannelSocket
classes instead of directly using POSIX sockets API. This
will later be extended to also cover the TLS, SASL and
websockets code.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Kevin Wolf [Fri, 18 Dec 2015 13:40:35 +0000 (14:40 +0100)]
Merge remote-tracking branch 'mreitz/tags/pull-block-for-kevin-2015-12-18' into queue-block
block-next patches from before the 2.5.0 release.
# gpg: Signature made Fri Dec 18 14:38:44 2015 CET using RSA key ID
E838ACAD
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"
* mreitz/tags/pull-block-for-kevin-2015-12-18:
block/qapi: allow best-effort query
qemu-img: abort when full_backing_filename not present
block/qapi: explicitly warn if !has_full_backing_filename
block/qapi: always report full_backing_filename
block/qapi: do not redundantly print "actual path"
qemu-iotests: s390x: fix test 068
qemu-iotests: s390x: fix test 051
qemu-iotests: refine common.config
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
John Snow [Mon, 14 Dec 2015 19:55:16 +0000 (14:55 -0500)]
block/qapi: allow best-effort query
For more complex BDS trees that can be created under normal circumstances,
we lose the ability to issue query commands because of our inability to
re-construct the absolute filename.
Instead, omit this field when it is a problem and present as much information
as we can.
This will change the expected output in iotest 110, where we will now see a
json filename and the lack of an absolute filename instead of an error.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id:
1450122916-4706-6-git-send-email-jsnow@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
John Snow [Mon, 14 Dec 2015 19:55:15 +0000 (14:55 -0500)]
qemu-img: abort when full_backing_filename not present
...But only if we have the backing_filename. It means something Scary
happened and we can't really be quite exactly sure if we can trust the
backing_filename.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id:
1450122916-4706-5-git-send-email-jsnow@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
John Snow [Mon, 14 Dec 2015 19:55:14 +0000 (14:55 -0500)]
block/qapi: explicitly warn if !has_full_backing_filename
Disambiguate "Backing filename and full backing filename are equivalent"
from "full backing filename could not be determined."
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id:
1450122916-4706-4-git-send-email-jsnow@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
John Snow [Mon, 14 Dec 2015 19:55:13 +0000 (14:55 -0500)]
block/qapi: always report full_backing_filename
Always report full_backing_filename, even if it's the same as
backing_filename. In the next patch, full_backing_filename may be
omitted if it cannot be generated instead of allowing e.g. drive_query
to abort if it runs into this scenario.
The presence or absence of the "full" field becomes useful information.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id:
1450122916-4706-3-git-send-email-jsnow@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
John Snow [Mon, 14 Dec 2015 19:55:12 +0000 (14:55 -0500)]
block/qapi: do not redundantly print "actual path"
If it happens to match the backing path, that was the actual path.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id:
1450122916-4706-2-git-send-email-jsnow@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Bo Tu [Thu, 3 Dec 2015 10:01:31 +0000 (18:01 +0800)]
qemu-iotests: s390x: fix test 068
Now, s390-virtio-ccw is default machine and s390-ccw.img is default boot
loader. If the s390-virtio-ccw machine finds no device to load from and
errors out, then emits a panic and exits the vm. This breaks test cases
068 for s390x.
Adding the parameter of "-no-shutdown" for s390-ccw-virtio will pause VM
before shutdown.
Acked-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com>
Message-id:
1449136891-26850-4-git-send-email-tubo@linux.vnet.ibm.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Bo Tu [Thu, 3 Dec 2015 10:01:30 +0000 (18:01 +0800)]
qemu-iotests: s390x: fix test 051
The tests for ide device should only be tested for the pc
platform.
Set device_id to "drive0", and replace every "-drive file..."
by "-drive file=...,if=none,id=$device_id", then x86 and s390x
can get the common output in the test of "Snapshot mode".
Warning message expected for s390x when drive without device.
A x86 platform specific output file is also needed.
Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com>
Message-id:
1449136891-26850-3-git-send-email-tubo@linux.vnet.ibm.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Bo Tu [Thu, 3 Dec 2015 10:01:29 +0000 (18:01 +0800)]
qemu-iotests: refine common.config
Replacing awk with sed, then it's easier to read.
Replacing "[ ! -z "$default_alias_machine" ]" with
"[[ $default_alias_machine ]]", then it's slightly shorter.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Suggested-By: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com>
Message-id:
1449136891-26850-2-git-send-email-tubo@linux.vnet.ibm.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Paolo Bonzini [Wed, 16 Dec 2015 18:33:47 +0000 (19:33 +0100)]
block: fix bdrv_ioctl called from coroutine
When called from a coroutine, bdrv_ioctl must be asynchronous just like
e.g. bdrv_flush. The code was incorrectly making it synchronous, fix
it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Wed, 16 Dec 2015 18:33:45 +0000 (19:33 +0100)]
block: use drained section around bdrv_snapshot_delete
Do not use bdrv_drain, since by itself it does not guarantee
anything.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fam Zheng [Fri, 18 Dec 2015 01:04:36 +0000 (09:04 +0800)]
iotests: Update comments for bdrv_swap() in 094
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fam Zheng [Fri, 18 Dec 2015 01:04:35 +0000 (09:04 +0800)]
block: Remove prototype of bdrv_swap from header
The function has gone.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Tue, 15 Dec 2015 10:35:36 +0000 (11:35 +0100)]
raw-posix: Make aio=native option binding
Traditionally, aio=native was treated as an advice that could simply be
ignored if an error occurs while initialising Linux AIO or the feature
wasn't compiled in. This behaviour was deprecated in commit
96518254
(qemu 2.3; error during init) and commit
1501ecc1 (qemu 2.5; not
compiled in).
This patch changes raw-posix to error out in these cases instead of
printing a deprecation warning.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Denis V. Lunev [Thu, 10 Dec 2015 09:55:48 +0000 (12:55 +0300)]
qcow2: insert assert into qcow2_get_specific_info()
s->qcow_version is always set to 2 or 3. Let's assert if this is wrong.
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Roman Kagan <rkagan@virtuozzo.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Mon, 27 Jul 2015 15:51:40 +0000 (17:51 +0200)]
iotests: Extend test 112 for qemu-img amend
Add tests for conversion between different refcount widths.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Mon, 27 Jul 2015 15:51:39 +0000 (17:51 +0200)]
qcow2: Point to amend function in check
If a reference count is not representable with the current refcount
order, the image check should point to qemu-img amend for increasing the
refcount order. However, qemu-img amend needs write access to the image
which cannot be provided if the image is marked corrupt; and the image
check will not mark the image consistent unless everything actually is
consistent.
Therefore, if an image is marked corrupt and the image check encounters
a reference count overflow, it cannot be fixed by using qemu-img amend
to increase the refcount order. Instead, one has to use qemu-img convert
to create a completely new copy of the image in this case.
Alternatively, we may want to give the user a way of manually removing
the corrupt flag, maybe through qemu-img amend, but this is not part of
this patch.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Mon, 27 Jul 2015 15:51:38 +0000 (17:51 +0200)]
qcow2: Invoke refcount order amendment function
Make use of qcow2_change_refcount_order() to support changing the
refcount order with qemu-img amend.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Mon, 27 Jul 2015 15:51:37 +0000 (17:51 +0200)]
qcow2: Add function for refcount order amendment
Add a function qcow2_change_refcount_order() which allows changing the
refcount order of a qcow2 image.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Mon, 27 Jul 2015 15:51:36 +0000 (17:51 +0200)]
qcow2: Use intermediate helper CB for amend
If there is more than one time-consuming operation to be performed for
qcow2_amend_options(), we need an intermediate CB which coordinates the
progress of the individual operations and passes the result to the
original status callback.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Mon, 27 Jul 2015 15:51:35 +0000 (17:51 +0200)]
qcow2: Split upgrade/downgrade paths for amend
If the image version should be upgraded, that is the first we should do;
if it should be downgraded, that is the last we should do. So split the
version change block into an upgrade part at the start and a downgrade
part at the end.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Mon, 27 Jul 2015 15:51:34 +0000 (17:51 +0200)]
qcow2: Use abort() instead of assert(false)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Mon, 27 Jul 2015 15:51:33 +0000 (17:51 +0200)]
qcow2: Use error_report() in qcow2_amend_options()
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Mon, 27 Jul 2015 15:51:32 +0000 (17:51 +0200)]
block: Add opaque value to the amend CB
Add an opaque value which is to be passed to the bdrv_amend_options()
status callback.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Mon, 27 Jul 2015 15:51:31 +0000 (17:51 +0200)]
progress: Allow regressing progress
Progress may regress; this should be displayed correctly by
qemu_progress_print().
While touching that area of code, drop the redundant parentheses in the
same condition.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Fri, 8 May 2015 16:11:08 +0000 (18:11 +0200)]
qemu-iotests: Test reopen with node-name/driver options
'node-name' and 'driver' should not be changed during a reopen
operation. It is, however, valid to specify them with the same value as
they already had.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Fri, 8 May 2015 16:06:47 +0000 (18:06 +0200)]
qemu-iotests: Test cache mode option inheritance
This is doing a more complete test on setting cache modes both while
opening an image (i.e. in a -drive command line) and in reopen
situations. It checks that reopen can specify options for child nodes
and that cache modes are correctly inherited from parent nodes where
they are not specified.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Fri, 8 May 2015 16:03:15 +0000 (18:03 +0200)]
qemu-iotests: Try setting cache mode for children
This is a basic test for specifying cache modes for child nodes on the
command line. It doesn't take much time and works without O_DIRECT
support.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Thu, 29 Oct 2015 14:22:27 +0000 (15:22 +0100)]
blkdebug: Enable reopen
Just reopening the children (as block.c does now) is enough.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Kevin Wolf [Fri, 8 May 2015 15:49:53 +0000 (17:49 +0200)]
block: Move cache options into options QDict
This adds the cache mode options to the QDict, so that they can be
specified for child nodes (e.g. backing.cache.direct=off).
The cache modes are not removed from the flags at this point; instead,
options and flags are kept in sync. If the user specifies both flags and
options, the options take precedence.
Child node inherit cache modes as options now, they don't use flags any
more.
Note that this forbids specifying the cache mode for empty drives. It
didn't make sense anyway to specify it there, because it didn't have any
effect. blockdev_init() considers the cache options now bdrv_open()
options and therefore doesn't create an empty drive any more but calls
into bdrv_open(). This in turn will fail with no driver and filename
specified.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Fri, 8 May 2015 15:24:56 +0000 (17:24 +0200)]
block: reopen: Extract QemuOpts for generic block layer options
This patch adds a QemuOpts for generic block layer options to
bdrv_reopen_prepare(). The only two options that currently exist
(node-name and driver) cannot be changed, so the only thing we do is
putting them right back into the QDict so that we check at the end that
they are indeed unchanged.
We will add new options soon that can actually be changed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Thu, 7 May 2015 12:41:30 +0000 (14:41 +0200)]
qemu-iotests: Remove cache mode test without medium
Specifying the cache mode for a driver without a medium is not a useful
thing to do: As long as there is no medium, the cache mode doesn't make
a difference, and once the 'change' command is used to insert a medium,
it ignores the old cache mode and makes the new medium use
cache=writethrough.
Later patches will make it an error to specify the cache mode for an
empty drive. Remove the corresponding test case.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Fri, 13 Nov 2015 13:45:42 +0000 (14:45 +0100)]
blockdev: Set 'format' indicates non-empty drive
Creating an empty drive while specifying 'format' doesn't make sense.
The specified format driver would simply be ignored.
Make a set 'format' option an indication that a non-empty drive should
be created. This makes 'format' consistent with 'driver' and allows
using it with a block driver that doesn't need any other options (like
null-co/null-aio).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Fri, 8 May 2015 14:15:03 +0000 (16:15 +0200)]
block: Introduce bs->explicit_options
bs->options doesn't only contain options that the user explicitly
requested, but also option that were derived from flags, the filename or
inherited from the parent node.
For reopen, it is important to know the difference because reopening the
parent can change inherited values in child nodes, but it shouldn't
change any options that were explicitly specified for the child.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Thu, 29 Oct 2015 14:24:41 +0000 (15:24 +0100)]
block: Split out parse_json_protocol()
The next patch distinguishes options that were explicitly set and
options that were derived. bdrv_fill_option() added options of both
types: Options given by json: syntax should be counted as explicit, but
the rest is derived.
In preparation for the distinction, move json: parse to a separate
function.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Wed, 29 Apr 2015 15:29:39 +0000 (17:29 +0200)]
block: Add infrastructure for option inheritance
Options are not actually inherited from the parent node yet, but this
commit lays the grounds for doing so.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Fri, 8 May 2015 15:07:31 +0000 (17:07 +0200)]
block: reopen: Document option precedence and refactor accordingly
The interesting part of reopening an image is from which sources the
effective options should be taken, i.e. which options take precedence
over which other options. This patch documents the precedence that will
be implemented in the following patches.
It also refactors bdrv_reopen_queue(), so that the top-level reopened
node is handled the same way as children are. Option/flag inheritance
from the parent becomes just one item in the list and is done at the
beginning of the function, similar to how the other items are/will be
handled.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Fri, 8 May 2015 13:14:15 +0000 (15:14 +0200)]
block: Allow specifying child options in reopen
If the child was defined in the same context (-drive argument or
blockdev-add QMP command) as its parent, a reopen of the parent should
work the same and allow changing options of the child.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Kevin Wolf [Fri, 24 Apr 2015 14:38:02 +0000 (16:38 +0200)]
block: Keep "driver" in bs->options
Instead of passing a separate drv argument to bdrv_open_common(), just
make sure that a "driver" option is set in the QDict. This also means
that a "driver" entry is consistently present in bs->options now.
This is another step towards keeping all options in the QDict (which is
the represenation of the blockdev-add QMP command).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Mon, 27 Apr 2015 11:50:54 +0000 (13:50 +0200)]
block: Pass driver-specific options to .bdrv_refresh_filename()
In order to decide whether a blkdebug: filename can be produced or a
json: one is necessary, blkdebug checked whether bs->options had more
options than just "config", "x-image" or "image" (the latter including
nested options). That doesn't work well when generic block layer options
are present.
This patch passes an option QDict to the driver that contains only
driver-specific options, i.e. the options for the general block layer as
well as child nodes are already filtered out. Works much better this
way.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Kevin Wolf [Mon, 27 Apr 2015 11:46:22 +0000 (13:46 +0200)]
block: Exclude nested options only for children in append_open_options()
Some drivers have nested options (e.g. blkdebug rule arrays), which
don't belong to a child node and shouldn't be removed. Don't remove all
options with "." in their name, but check for the complete prefixes of
actually existing child nodes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Fri, 24 Apr 2015 13:20:28 +0000 (15:20 +0200)]
block: Consider all block layer options in append_open_options
The code already special-cased "node-name", which is currently the only
option passed in the QDict that isn't driver-specific. Generalise the
code to take all general block layer options into consideration.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Kevin Wolf [Fri, 16 Jan 2015 17:23:41 +0000 (18:23 +0100)]
block: Allow references for backing files
For bs->file, using references to existing BDSes has been possible for a
while already. This patch enables the same for bs->backing.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Wed, 28 Oct 2015 12:24:26 +0000 (13:24 +0100)]
mirror: Error out when a BDS would get two BBs
bdrv_replace_in_backing_chain() asserts that not both old and new
BlockDdriverState have a BlockBackend attached to them because both
would have to end up pointing to the new BDS and we don't support more
than one BB per BDS yet.
Before we can safely allow references to existing nodes as backing
files, we need to make sure that even if a backing file has a BB on it,
this doesn't crash qemu.
There are probably also some cases with the 'replaces' option set where
drive-mirror could fail this assertion today. They are fixed with this
error check as well.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Mon, 16 Nov 2015 15:43:27 +0000 (16:43 +0100)]
block: Fix reopen with semantically overlapping options
This fixes bdrv_reopen() calls like the following one:
qemu-io -c 'open -o overlap-check.template=all /tmp/test.qcow2' \
-c 'reopen -o overlap-check=none'
The approach taken so far would result in an options QDict that has both
"overlap-check.template=all" and "overlap-check=none", which obviously
conflicts. In this case, the old option should be overridden by the
newly specified option.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Kevin Wolf [Mon, 16 Nov 2015 14:34:59 +0000 (15:34 +0100)]
qcow2: Add .bdrv_join_options callback
qcow2 accepts a few driver-specific options that overlap semantically
(e.g. "overlap-check" is an alias of "overlap-check.template", and any
missing cache size option is derived from the given ones).
When bdrv_reopen() merges the set of updated options with left out
options that should be kept at their old value, we need to consider this
and filter out any duplicates (which would generally cause errors
because new and old value would contradict each other).
This patch adds a .bdrv_join_options callback to BlockDriver and
implements it for qcow2.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>