OSDN Git Service
Axel Davy [Thu, 19 Jun 2014 03:27:30 +0000 (23:27 -0400)]
gallium: Add __DRIimageDriverExtension support to gallium
__DRIimageDriverExtension is used by GLX DRI3 and Wayland.
This patch is a rewrite of
http://lists.freedesktop.org/archives/mesa-dev/2014-May/060318.html
and
http://lists.freedesktop.org/archives/mesa-dev/2014-May/060317.html
Previous patches were:
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Axel Davy [Thu, 19 Jun 2014 03:27:31 +0000 (23:27 -0400)]
dri3: use invalidate.
This doesn't change anything to the intel DRI3 implementation,
but enables the gallium implementation to use dri2.stamp instead
of relying on the stamp shared with the st backend.
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Fri, 27 Jun 2014 01:38:21 +0000 (11:38 +1000)]
dri3: fix image extension checking.
Move the image extension setup in with all the others in
bind_extensions, and improve the check to both version
and function pointer.
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jasper St. Pierre [Tue, 24 Jun 2014 17:43:53 +0000 (13:43 -0400)]
glxext: Send the Drawable's ID in the GLX_BufferSwapComplete event
While the official INTEL_swap_event specification says that the drawable
field should contain the GLXDrawable, not the Drawable, the existing
DRI2 code in dri2.c that translates from DRI2_BufferSwapComplete sends out
GLX_BufferSwapComplete with the Drawable's ID, so existing codebases
like Clutter/Cogl rely on getting the Drawable.
Match DRI2's error here and stuff the event with the X Drawable, not
the GLX drawable.
This fixes apps seeing wrong drawables through an indirect GLX context
or with DRI3, which uses the GLX_BufferSwapComplete event directly on
the wire instead of translates Present in mesa.
At the same time, also modify the structure for the event to make sure
that clients don't make the same mistake. This is not an API or ABI
break, as GLXDrawable and Drawable are both typedefs for XID.
Signed-off-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Kenneth Graunke [Tue, 24 Jun 2014 23:34:49 +0000 (16:34 -0700)]
i965: Enable compressed multisample support (CMS) on Broadwell.
Everything is in place and appears to be working.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Kenneth Graunke [Tue, 24 Jun 2014 23:33:56 +0000 (16:33 -0700)]
i965: Add 2x MSAA support to the MCS allocation function.
2x MSAA also uses 8 bits, just like 4x. More bits are unused.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Kenneth Graunke [Sat, 10 May 2014 08:59:10 +0000 (01:59 -0700)]
i965: Hook up the MCS buffers in SURFACE_STATE on Broadwell.
MCS buffers are never allocated on Broadwell, so this does nothing for
now, but puts the infrastructure in place for when they do exist.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Kenneth Graunke [Sat, 10 May 2014 05:22:24 +0000 (22:22 -0700)]
i965: Drop SINT workaround for CMS layout on Broadwell.
According to the documentation, we don't need this SINT workaround on
Broadwell. (Or at least, it doesn't mention that we need it.)
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Kenneth Graunke [Sat, 10 May 2014 08:42:15 +0000 (01:42 -0700)]
i965: Add plumbing for Broadwell's auxiliary surface support.
Broadwell generalizes the MCS fields to allow for multiple kinds of
auxiliary surfaces. This patch adds the plumbing to set those values,
but doesn't yet hook any up.
v2: (by Jordan Justen) Use mt for qpitch; pitch is tiles - 1.
v3: Don't forget to subtract 1 from aux_mt->pitch.
v4: Drop unnecessary aux_mt->offset (caught by Jordan Justen).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Jordan Justen [Thu, 6 Mar 2014 17:18:14 +0000 (09:18 -0800)]
i965: Add auxiliary surface field #defines for Broadwell.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Kenneth Graunke [Thu, 26 Jun 2014 18:19:15 +0000 (11:19 -0700)]
i965: Disassemble all of DP write message control bits on Gen6.
Prior to the new brw_inst API, the brw_instruction structure split off
bits 4 and 5 of msg_control for specific fields, and we failed to
disassemble them.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Matt Turner [Mon, 16 Jun 2014 23:34:57 +0000 (16:34 -0700)]
i965: Pass brw to brw_try_compact_instruction().
Signed-off-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Matt Turner [Sun, 15 Jun 2014 18:15:30 +0000 (11:15 -0700)]
i965: Add is_cherryview flag to brw_context.
Signed-off-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Matt Turner [Mon, 16 Jun 2014 01:58:28 +0000 (18:58 -0700)]
i965: Add CSEL opcode definition for Gen8.
Signed-off-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Matt Turner [Sat, 14 Jun 2014 03:50:45 +0000 (20:50 -0700)]
i965: Document which instructions are generation specific.
Signed-off-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Matt Turner [Tue, 17 Jun 2014 19:14:05 +0000 (12:14 -0700)]
i965: Don't set UIP for ENDIF/WHILE.
They don't have a UIP. We used UIP in an array dereference, which never
caused problems on Gen < 8, since UIP was a small integer (number of
instructions). On Gen 8 UIP is in bytes, so it's large enough that it
caused us to read out of bounds of the array.
Signed-off-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Matt Turner [Fri, 13 Jun 2014 23:16:28 +0000 (16:16 -0700)]
i965: Replace struct brw_compact_instruction with brw_compact_inst.
Signed-off-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Matt Turner [Sat, 14 Jun 2014 00:30:05 +0000 (17:30 -0700)]
i965: Convert brw_eu_compact.c to the new brw_compact_inst API.
Signed-off-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Matt Turner [Fri, 13 Jun 2014 22:09:12 +0000 (15:09 -0700)]
i965: Introduce a new brw_compact_inst API.
For now nothing uses this, but we can incrementally convert.
Signed-off-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Matt Turner [Fri, 13 Jun 2014 21:29:25 +0000 (14:29 -0700)]
i965: Replace 'struct brw_instruction' with 'brw_inst'.
Use this an an opportunity to clean up the formatting of some old code
(brw_ADD, for instance).
Signed-off-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Matt Turner [Fri, 13 Jun 2014 19:19:29 +0000 (12:19 -0700)]
i965: Throw out guts of struct brw_instruction.
Signed-off-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Matt Turner [Fri, 13 Jun 2014 19:18:24 +0000 (12:18 -0700)]
i965: Convert brw_gs_emit.c to the new brw_inst API.
Signed-off-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Matt Turner [Thu, 12 Jun 2014 23:26:22 +0000 (16:26 -0700)]
i965: Convert brw_disasm.c to the new brw_inst API.
v2: (by Kenneth Graunke)
- Fix disassembly of Gen4-5 SEND messages to print base MRF correctly.
- Only print URB opcode on Gen5+, to match previous output (besides,
there is only one opcode AFAICT.)
- Only print the low 3 bits of msg_control, to match previous output.
(We probably should decode all the fields, but hadn't previously due
to the brw_instruction structure definition splitting out bits 4/5
for last_render_target and slot_group_select.)
- Fix 3-source MRF/GRF file decoding on Sandybridge.
- Fix compression code to use qtr_control rather than cmpt_control
(which is compaction, not compression).
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org> [v2]
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Matt Turner [Thu, 12 Jun 2014 23:08:02 +0000 (16:08 -0700)]
i965: Pass brw rather than gen to brw_disassemble_inst().
We will need it in order to use the new brw_inst API.
Signed-off-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Matt Turner [Thu, 12 Jun 2014 06:10:19 +0000 (23:10 -0700)]
i965: Convert brw_eu_compact.c to the new brw_inst API.
v2: Use brw_inst_bits rather than pulling out individual fields and
reassembling them.
Signed-off-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Kenneth Graunke [Sun, 8 Jun 2014 06:52:37 +0000 (23:52 -0700)]
i965: Extend is_haswell checks to gen >= 8 in Gen4-7 generators.
We're going to use fs_generator/vec4_generator for Gen8+ code soon,
thanks to the new brw_instruction API. When we do, we'll generally
want to take the Haswell paths on Gen8+ as well.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Kenneth Graunke [Sun, 8 Jun 2014 05:58:26 +0000 (22:58 -0700)]
i965: Convert test_eu_compact.c to the new brw_inst API.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Kenneth Graunke [Sun, 8 Jun 2014 05:46:59 +0000 (22:46 -0700)]
i965: Convert vec4_generator to the new brw_inst API.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Kenneth Graunke [Sun, 8 Jun 2014 05:44:24 +0000 (22:44 -0700)]
i965: Convert fs_generator to the new brw_inst API.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Kenneth Graunke [Sun, 8 Jun 2014 05:22:41 +0000 (22:22 -0700)]
i965: Convert Gen4-5 clipping code to the new brw_inst API.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Kenneth Graunke [Sun, 8 Jun 2014 04:29:47 +0000 (21:29 -0700)]
i965: Convert brw_sf_emit.c to the new brw_inst API.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Kenneth Graunke [Thu, 5 Jun 2014 00:08:57 +0000 (17:08 -0700)]
i965: Convert brw_eu_emit.c to the new brw_inst API.
v2:
- Fix IF -> ELSE patching on Sandybridge.
- Don't set base_mrf on Gen6+ in OWord Block Read functions. (Although
- the old code did this universally, it shouldn't have - the field
- doesn't exist on Gen6+ and just got overwritten by the SFID anyway.)
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Kenneth Graunke [Sun, 8 Jun 2014 04:24:41 +0000 (21:24 -0700)]
i965: Convert brw_eu.[ch] to use the new brw_inst API.
v2: Don't set flag_reg_nr prior to Gen7 (as it doesn't exist).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Kenneth Graunke [Thu, 5 Jun 2014 00:07:30 +0000 (17:07 -0700)]
i965: Introduce a new brw_inst API.
This is similar to gen8_instruction, and will eventually replace it.
For now nothing uses this, but we can incrementally convert.
The new API takes the existing brw_instruction pointers to ease
conversion; when done, we can simply drop the old structure and rename
struct brw_instruction -> brw_inst.
v2: (by Matt Turner) Make JIP/UIP functions take a signed argument.
v3: (by Kenneth Graunke)
- Make Gen4-6 jump target functions take a signed argument.
- Fix indirect align1 AddrImm bits on Gen4-7.
- Fix SFID on Sandybridge to use bits 27:24.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org> [v1, v3+]
Signed-off-by: Matt Turner <mattst88@gmail.com> [v2]
Reviewed-by: Matt Turner <mattst88@gmail.com>
Kenneth Graunke [Sun, 8 Jun 2014 04:15:59 +0000 (21:15 -0700)]
i965: Pass brw into next_offset().
The new brw_inst API is going to require a brw pointer in order
to access fields (so it can do generation checks). Plumb it in now.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Greg Hunt [Wed, 25 Jun 2014 13:42:24 +0000 (14:42 +0100)]
i965: Remove unneeded VS workaround stalls on Baytrail.
According to the workarounds list, these stalls aren't needed on
production Baytrail systems. Piglit confirms that as well.
These cause a small slowdown when we are sending a large number of small
batches to the GPU. Removing these improves performance by up to 5% on
some CPU bound SynMark tests (Batch[4-7], DrvState1, HdrBloom,
Multithread, ShMapPcf).
Signed-off-by: Gregory Hunt <greg.hunt@mobica.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Kenneth Graunke [Tue, 24 Jun 2014 23:18:11 +0000 (16:18 -0700)]
i965: Include marketing names for Broadwell GPUs.
Intel would like us to include the marketing names. Developers
additionally want "Broadwell GT1/2/3" because it makes it easier
to identify what hardware users have when they request assistance
or report issues.
Including both makes it easy for everyone to map between the names.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Roland Scheidegger [Thu, 26 Jun 2014 00:37:44 +0000 (02:37 +0200)]
softpipe: use last_level from sampler view, not from the resource
The last_level from the sampler view may be limited by the state tracker
to a value lower than what the base texture provides.
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=80541.
Reviewed-by: Brian Paul <brianp@vmware.com>
Emil Velikov [Thu, 12 Jun 2014 16:10:52 +0000 (17:10 +0100)]
targets/automake.inc: s/GALLIUM_VIDEO_CFLAGS/GALLIUM_TARGET_CFLAGS/
The flags are not specific to the video targets plus
we can reuse them for targets/xa and targets/gbm.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Emil Velikov [Thu, 12 Jun 2014 16:03:50 +0000 (17:03 +0100)]
auxiliary/vl: Remove no longer used SPLIT_TARGETS
Required for the conversion stage of all VL targets to
a single library per API (static/shared pipe-drivers).
No longer required as per last commit.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Emil Velikov [Sat, 21 Jun 2014 11:38:30 +0000 (12:38 +0100)]
targets/radeonsi/omx: convert to static/shared pipe-drivers
The radeonsi counterpart of previous commit - now libomx-radeonsi is
built into the libomx-mesa library. Providing a single library per API.
v2: Include the radeon winsys only when there is a user for it.
v3: Correcly include the winsys. Now with extra brown bag :\
Note: Make sure to rebuild the .omxregister file, by executing
$ omxregister-bellagio
This patch concludes the unification. Now libomx-mesa will be used
for all hardware - r600, radeonsi and nouveau.
Cc: Leo Liu <leo.liu@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Emil Velikov [Thu, 12 Jun 2014 15:38:54 +0000 (16:38 +0100)]
targets/r600/omx: convert to static/shared pipe-drivers
The r600 counterpart of previous commit - now the libomx-r600 is
built into the libomx-mesa library. Providing a single library per API.
v2: Include the radeon winsys only when there is a user for it.
v3: Correcly include the winsys. Now with extra brown bag :\
Note: Make sure to rebuild the .omxregister file, by executing
$ omxregister-bellagio
If you have more than one omx library (libomx-radeonsi, libomx-r600),
make sure to temporary move the unused one. By the end of the series
there will be only one library that will be used for all hardware -
r600, radeonsi and nouveau.
Cc: Leo Liu <leo.liu@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Emil Velikov [Thu, 12 Jun 2014 15:33:58 +0000 (16:33 +0100)]
targets/omx-nouveau: convert to static/shared pipe-drivers
Similar to the vdpau/xvmc targets, we're going to convert the
multiple target libraries into a single one.
The library can be built with the relevant pipe-drivers
statically linked in, or loaded as shared modules.
Currently we default to static.
Note: Make sure to rebuild the .omxregister file, by executing
$ omxregister-bellagio
If you have more than one omx library (libomx-radeonsi, libomx-r600),
make sure to temporary move the unused one. By the end of the series
there will be only one library that will be used for all hardware -
r600, radeonsi and nouveau.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Emil Velikov [Tue, 10 Jun 2014 01:14:18 +0000 (02:14 +0100)]
st/omx: avoid using dynamic vid_(enc|dec)_base and avc_(name|role)
Strictly speaking we should not have done this in the
first place, as all of the above should be static across
the system.
Currently this may cause some minor issues, which will be
resolved in the following patches, by providing a single
library for the OMX api.
Cleanup a few unneeded strcpy cases while we're around.
Note: Make sure to rebuild the .omxregister file, by executing
$ omxregister-bellagio
If you have more than one omx library (libomx-radeonsi, libomx-r600),
make sure to temporary move the unused one. By the end of the series
there will be only one library that will be used for all hardware -
r600, radeonsi and nouveau.
Cc: Leo Liu <leo.liu@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Emil Velikov [Tue, 10 Jun 2014 01:28:00 +0000 (02:28 +0100)]
st/omx: provide constant number of components
The number of components and their names/roles should
be kept constant as all of that information cached.
Note: Make sure to rebuild the .omxregister file, by executing
$ omxregister-bellagio.
Cc: Leo Liu <leo.liu@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Juha-Pekka Heikkila [Fri, 25 Apr 2014 08:16:50 +0000 (11:16 +0300)]
glx: Added missing null check in GetDrawableAttribute()
For GLX_BACK_BUFFER_AGE_EXT query added extra null check.
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Juha-Pekka Heikkila [Thu, 8 May 2014 08:16:54 +0000 (11:16 +0300)]
mesa/main: In register_surface() verify gl_texture_object was found
Verify _mesa_lookup_texture() returned valid pointer before using it.
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Juha-Pekka Heikkila [Thu, 8 May 2014 07:34:50 +0000 (10:34 +0300)]
mesa/main: Verify calloc return value in register_surface()
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Juha-Pekka Heikkila [Wed, 7 May 2014 09:38:07 +0000 (12:38 +0300)]
glsl: Add missing null check in push_back()
Report memory error on realloc failure and don't leak any memory.
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Juha-Pekka Heikkila [Thu, 3 Apr 2014 14:06:42 +0000 (17:06 +0300)]
glsl: check _mesa_hash_table_create return value in link_uniform_blocks
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Juha-Pekka Heikkila [Mon, 7 Apr 2014 11:37:42 +0000 (14:37 +0300)]
i965/fs: Check variable_storage return value in fs_visitor::visit
check variable_storage() found the requested fs_reg.
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Juha-Pekka Heikkila [Mon, 12 May 2014 12:25:59 +0000 (15:25 +0300)]
i965: Handle miptree creation failure in intel_alloc_texture_storage()
Check intel_miptree_create() return value before using it as
a pointer.
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Juha-Pekka Heikkila [Thu, 8 May 2014 13:19:51 +0000 (16:19 +0300)]
i965: Check calloc return value in gather_statistics_results()
Check calloc return value and report on error, also later skip
results handling if there was no memory to store results to.
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Matt Turner [Tue, 24 Jun 2014 05:29:57 +0000 (22:29 -0700)]
i965/vec4: Try constant propagate after copy propagate made progress.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Matt Turner [Tue, 24 Jun 2014 05:16:02 +0000 (22:16 -0700)]
i965/vec4: Make try_copy_propagate() static.
Now that can_do_source_mods() isn't part of the visitor, this doesn't
need to be either.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Matt Turner [Tue, 24 Jun 2014 05:12:03 +0000 (22:12 -0700)]
i965/vec4: Rename try_copy/constant_propagat{ion,e} to match the fs.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Matt Turner [Tue, 24 Jun 2014 05:07:38 +0000 (22:07 -0700)]
i965/vec4: Constant propagate into 2-src math instructions on Gen8.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Matt Turner [Tue, 24 Jun 2014 05:07:20 +0000 (22:07 -0700)]
i965/fs: Constant propagate into 2-src math instructions on Gen8.
total instructions in shared programs:
1878133 ->
1876986 (-0.06%)
instructions in affected programs: 153007 -> 151860 (-0.75%)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Matt Turner [Tue, 24 Jun 2014 05:05:03 +0000 (22:05 -0700)]
i965/fs: Make try_constant_propagate() static.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Matt Turner [Tue, 24 Jun 2014 04:57:31 +0000 (21:57 -0700)]
i965: Make can_do_source_mods() a member of the instruction classes.
Pretty nonsensical to have it as a method of the visitor just for access
to brw.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Chris Forbes [Sun, 15 Jun 2014 00:57:20 +0000 (12:57 +1200)]
glsl: Treat an interface block specifier as a level of struct nesting
Fixes the piglit test:
spec/glsl-1.50/compiler/interface-blocks-structs-defined-within-block-instanced.vert
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Chris Forbes [Thu, 12 Jun 2014 09:17:13 +0000 (21:17 +1200)]
glsl: Disallow primitive type layout qualifier on variables.
This only makes any sense on the GS input or output layout declaration,
nowhere else.
Fixes the piglit tests:
* spec/glsl-1.50/compiler/incorrect-in-layout-qualifiers-with-variable-declarations.geom
* spec/glsl-1.50/compiler/incorrect-out-layout-qualifiers-with-variable-declarations.geom
* spec/glsl-1.50/compiler/layout-fs-no-output.frag
* spec/glsl-1.50/compiler/layout-vs-no-input.vert
* spec/glsl-1.50/compiler/layout-vs-no-output.vert
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Chris Forbes [Thu, 12 Jun 2014 07:48:58 +0000 (19:48 +1200)]
glsl: Relax combinations of layout qualifiers with other qualifiers.
Previously we disallowed any combination of layout with interpolation,
invariant, or precise qualifiers. There is very little spec guidance on
exactly which combinations should be allowed, but with ARB_sso it's
useful to allow these qualifiers with rendezvous-by-location.
Since it's unclear exactly where the layout qualifier should appear when
combined with other qualifiers, we will allow it anywhere before the
auxiliary storage qualifier.
This allows enough flexibility for all examples I've seen, while keeping
the auxiliary-storage-qualifier / storage-qualifier pair together (as
they are a single qualifier in the spec prior to
ARB_shading_language_420pack)
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Ian Romanick [Wed, 25 Jun 2014 02:12:24 +0000 (19:12 -0700)]
glsl: Don't convert reductions of ivec to a dot-product
Mesa has an optimization that converts expressions like "v.x + v.y + v.z
+ v.w" into dot(v, 1.0). And therein lies the rub: the other operand to
the dot-product is always a float... even if the vector is an ivec or
uvec. This results in an assertion failure in ir_builder.
If the base type of the operand is not float, don't try the
optimization. Dot-product is not valid on integer data.
Fixes piglit vs-integer-reduction.shader_test and OpenGL ES conformance
test ES2-CTS.gtf.GL2Tests.glGetUniform.glGetUniform.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Christoph Brill <egore911@gmail.com>
Carl Worth [Wed, 25 Jun 2014 04:49:38 +0000 (21:49 -0700)]
docs: Import 10.2.2 release notes, add news item
Carl Worth [Wed, 25 Jun 2014 04:40:15 +0000 (21:40 -0700)]
docs: Import 10.1.6 release notes, add news item
Takashi Iwai [Wed, 25 Jun 2014 00:03:07 +0000 (02:03 +0200)]
llvmpipe: Fix zero-division in llvmpipe_texture_layout()
Fix the crash of "gnome-control-center info" invocation on QEMU where
zero height is passed at init.
(sroland: simplify logic by eliminating the div altogether, using 64bit mul.)
Fixes: https://bugzilla.novell.com/show_bug.cgi?id=879462
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Matt Turner [Mon, 23 Jun 2014 20:30:15 +0000 (13:30 -0700)]
i965/fs: Don't fix_math_operand() on Gen >= 8.
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Matt Turner [Mon, 23 Jun 2014 20:30:14 +0000 (13:30 -0700)]
i965/vec4: Don't fix_math_operand() on Gen >= 8.
The emit_math?_gen? functions serve to implement workarounds for the
math instruction, none of which exist on Gen8+.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Matt Turner [Mon, 23 Jun 2014 20:30:13 +0000 (13:30 -0700)]
i965/vec4: Don't return void from a void function.
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Bruno Jiménez [Thu, 19 Jun 2014 18:20:02 +0000 (20:20 +0200)]
r600g/compute: Defer the creation of the temporary resource
For the first use of a buffer, we will only need the temporary
resource in the case that a user wants to write/map to this buffer.
But in the cases where the user creates a buffer to act as an
output of a kernel, then we were creating an unneeded resource,
because it will contain garbage, and would be copied to the pool,
and destroyed when promoting.
This patch avoids the creation and copies of resources in
this case.
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Jan Vesely [Thu, 19 Jun 2014 18:20:01 +0000 (20:20 +0200)]
r600g/compute: Handle failures in compute_memory_pool_finalize
Reviewed-by: Bruno Jiménez <brunojimen@gmail.com>
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
Jan Vesely [Thu, 19 Jun 2014 18:20:00 +0000 (20:20 +0200)]
r600g/compute: Fix possible endless loop in compute_memory_pool allocations.
The important part is the change of the condition to <= 0. Otherwise the loop
gets stuck never actually growing the pool.
The change in the aux-need calculation guarantees max 2 iterations, and
avoids wasting memory in case a smaller item can't fit into a relatively larger
pool.
Reviewed-by: Bruno Jiménez <brunojimen@gmail.com>
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
Jan Vesely [Mon, 23 Jun 2014 14:39:00 +0000 (10:39 -0400)]
r600: Fix use after free in compute_memory_promote_item.
The dst pointer needs to be initialized after any calls to
compute_memory_grow_pool, as the function might change the pool->vbo pointer.
This fixes crashes and assertion failures in two gegl tests.
Reviewed-by: Bruno Jiménez <brunojimen@gmail.com>
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
Ilia Mirkin [Thu, 19 Jun 2014 08:25:04 +0000 (04:25 -0400)]
nouveau: dup fd before passing it to device
nouveau screens are reused for the same device node. However in the
scenario where we create screen 1, screen 2, and then delete screen 1,
the surrounding code might also close the original device node. To
protect against this, dup the fd and use the dup'd fd in the
nouveau_device. Also tell the nouveau_device that it is the owner of the
fd so that it will be closed on destruction.
Also make sure to free the nouveau_device in case of any failure.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79823
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@ubuntu.com>
Fredrik Höglund [Thu, 23 Jan 2014 17:47:44 +0000 (18:47 +0100)]
mesa: Don't use derived vertex state in api_arrayelt.c
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
Ilia Mirkin [Sat, 21 Jun 2014 23:25:07 +0000 (19:25 -0400)]
nvc0: allow VIEWPORT_INDEX and LAYER to be used as input semantics
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Ilia Mirkin [Sat, 21 Jun 2014 23:12:24 +0000 (19:12 -0400)]
mesa/st: handle gl_Layer input semantic
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tobias Klausmann [Mon, 23 Jun 2014 21:01:42 +0000 (23:01 +0200)]
nv50/ir: allow gl_ViewportIndex to work on non-provoking vertices
Previously, if we had something like:
gl_ViewportIndex = idx;
for(int i = 0; i < gl_in.length(); i++) {
gl_Position = gl_in[i].gl_Position;
EmitVertex();
}
EndPrimitive();
The right viewport index would not be set on the primitive because the
last vertex is the provoking one. However blob drivers appear to move
the gl_ViewportIndex write into the for loop, allowing the application
to be ignorant of this detail.
While the application is technically wrong here, because the blob does
it and other drivers appear to implicitly work this way as well, we add
a buffer register that viewport index writes go into, which is then
exported before every EmitVertex() call.
This fixes the remaining piglit tests in ARB_viewport_array for nv50/nvc0.
Signed-off-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Roland Scheidegger [Mon, 23 Jun 2014 20:06:15 +0000 (22:06 +0200)]
draw: (trivial) fix clamping of viewport index
The old logic would let all negative values go through unclamped, with
potentially disastrous results (probably trying to fetch viewport values
from random memory locations). GL has undefined rendering for vp indices
outside valid range but that's a bit too undefined...
(The logic is now the same as in llvmpipe.)
CC: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Tested-by: Ilia Mirkin <imirkin@alum.mit.edu>
Kenneth Graunke [Thu, 29 May 2014 07:06:08 +0000 (00:06 -0700)]
i965: Don't emit SURFACE_STATEs for gather workarounds on Broadwell.
As far as I can tell, Broadwell doesn't need any of the SURFACE_STATE
workarounds for textureGather() bugs, so there's no need to emit
a second set of identical copies.
To keep things simple, just point the gather surface index base to the
same place as the texture surface index base.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Emil Velikov [Mon, 23 Jun 2014 17:30:00 +0000 (18:30 +0100)]
targets/(vdpau|xvmc): hardlink against the installed library
With commit
11e46a32aed and
f9ebb1ea771 we resolved the symlink
generation required by the versioning of the library.
Although they incorrectly changed the way hardlinks are created by
linking to the ones from the build tree. If the device used for
building differs from the one set as destination linking will fail.
Reported-by: Andy Furniss <adf.lists@gmail.com>
Tested-by: Andy Furniss <adf.lists@gmail.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Neil Roberts [Mon, 23 Jun 2014 16:43:08 +0000 (17:43 +0100)]
i965: Allow the blorp blit between BGR and RGB
Previously the blorp blitter would only be used if the format is identical or
there is only a difference between whether there is an alpha component or not.
This patch makes it also allow the blorp blitter if the only difference is the
ordering of the RGB components (ie, RGB or BGR).
This is particularly useful since commit
61e264f4fcdba3623 because Mesa now
prefers RGB ordering for textures but the window system buffers are still
created as BGR. That means that the blorp blitter won't be used for the
(probably) common case of blitting from a texture to the window system buffer.
This doesn't cause any regressions in the FBO piglit tests on Haswell. On
Sandybridge it causes the fbo-blit-stretch test to fail but that is only
because it was failing anyway before the above commit and that commit hid the
problem.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68365
Reviewed-by: Matt Turner <mattst88@gmail.com>
Ian Romanick [Sat, 21 Jun 2014 00:27:19 +0000 (17:27 -0700)]
glsl: Silence many unused parameter warnings
In file included from ../../src/glsl/builtin_functions.cpp:61:0:
../../src/glsl/glsl_parser_extras.h:154:9: warning: unused parameter 'var' [-Wunused-parameter]
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Emil Velikov [Mon, 23 Jun 2014 14:54:36 +0000 (15:54 +0100)]
targets/xvmc: correctly generate the symlinks
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Emil Velikov [Mon, 23 Jun 2014 14:13:47 +0000 (15:13 +0100)]
targets/vdpau: correctly generate the symlinks
Reported-by: David Heidelberger <david.heidelberger@ixit.cz>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Ville Syrjälä [Mon, 16 Jun 2014 17:54:32 +0000 (20:54 +0300)]
i915: Fix gen2 texblend setup
Fix an off by one in the texture unit walk during texblend
setup on gen2. This caused the last enabled texunit to be
skipped resulting in totally messed up texturing.
This is a regression introduced here:
commit
1ad443ecdd694dd9bf3c4a5050d749fb80db6fa2
Author: Eric Anholt <eric@anholt.net>
Date: Wed Apr 23 15:35:27 2014 -0700
i915: Redo texture unit walking on i830.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Iago Toral Quiroga [Fri, 20 Jun 2014 08:01:40 +0000 (10:01 +0200)]
mesa: Make Geom.UsesEndPrimitive a bool instead of a GLboolean
Emil Velikov [Thu, 12 Jun 2014 15:59:58 +0000 (16:59 +0100)]
targets/r600/xvmc: convert to static/shared pipe-drivers
The r600 equivalent of previous commit.
v2: Correctly include the radeon winsys/radeon_common.
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Thomas Helland <thomashelland90 at gmail.com>
Emil Velikov [Thu, 12 Jun 2014 14:54:15 +0000 (15:54 +0100)]
targets/xvmc-nouveau: convert to static/shared pipe-drivers
Similar to vdpau targets, we're going to convert the individual
target libraries into a single one.
The library can be built with the relevant pipe-drivers
statically linked in, or loaded as shared modules.
Currently we default to static.
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Thomas Helland <thomashelland90 at gmail.com>
Emil Velikov [Sat, 21 Jun 2014 11:31:47 +0000 (12:31 +0100)]
targets/radeonsi/vdpau: convert to static/shared pipe-drivers
Similar to previous commits, this allows us to minimise some
of the duplication by compacting all vdpau targets into a
single library.
v2: Include the radeon winsys only when there is a user for it.
v3: Correcly include the winsys. Now with extra brown bag :\
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Thomas Helland <thomashelland90 at gmail.com>
Emil Velikov [Thu, 12 Jun 2014 15:57:31 +0000 (16:57 +0100)]
targets/r600/vdpau: convert to static/shared pipe-drivers
Similar to previous commit, this allows us to minimise some
of the duplication by compacting all vdpau targets into a
single library.
v2: Include the radeon winsys only when there is a user for it.
v3: Correcly include the winsys. Now with extra brown bag :\
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Thomas Helland <thomashelland90 at gmail.com>
Emil Velikov [Thu, 12 Jun 2014 14:41:29 +0000 (15:41 +0100)]
targets/vdpau-nouveau: convert to static/shared pipe-drivers
Create a single library (for the vdpau api) thus reducing
the overall size of mesa. Current commit converts
vdpau-nouveau, with upcomming commits handling the rest.
The library can be built with the relevant pipe-drivers
statically linked in, or loaded as shared modules.
Currently we default to static.
Add SPLIT_TARGETS to guard the other VL targets.
Note: symlink handling is rather ugly and will need an
update to work with BSD and other non-linux platforms.
v2: Split the conversion into per-target basis.
Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Thomas Helland <thomashelland90 at gmail.com>
Chris Forbes [Sun, 22 Jun 2014 11:53:59 +0000 (23:53 +1200)]
Partially revert "glsl: Add builtin define for ARB_fragment_layer_viewport"
This partially reverts commit
cc18b1ec2161c846109e921d7821dfeef7a06f3a,
which dropped some unrelated code due to a fumbled rebase.
Rob Clark [Wed, 18 Jun 2014 17:50:14 +0000 (13:50 -0400)]
freedreno: use util_copy_framebuffer_state()
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Rob Clark [Fri, 13 Jun 2014 21:39:59 +0000 (17:39 -0400)]
freedreno/a3xx: WFI fixes/cleanup
Blob driver seems to need WFI in some cases after CP_EVENT_WRITE,
implying that this is asynchronous and should reset needs_wfi.
Also, CP_INVALIDATE_STATE seems to need WFI. But CP_LOAD_STATE
does not.
The blob driver also puts WFIs before writing GRAS_CL_VPORT registers.
The latter may be a work-around, as these registers should be banked/
context registers. I haven't yet found a lockup that this averts, but
I expect viewport to change infrequently so out of paranoia I will
keep these for now.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Chris Forbes [Sat, 25 Jan 2014 05:29:38 +0000 (18:29 +1300)]
glsl: Add gl_Layer and gl_ViewportIndex builtins to fragment shader
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Chris Forbes [Sat, 25 Jan 2014 05:24:38 +0000 (18:24 +1300)]
glsl: Add builtin define for ARB_fragment_layer_viewport
The spec doesn't actually mention adding this, but this is the usual
pattern so I'm assuming it's a spec bug.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Chris Forbes [Sat, 25 Jan 2014 05:24:18 +0000 (18:24 +1300)]
glsl: Add extension plumbing for ARB_fragment_layer_viewport
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Chris Forbes [Sat, 25 Jan 2014 05:13:01 +0000 (18:13 +1300)]
mesa: Add extension plumbing for ARB_fragment_layer_viewport
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>