OSDN Git Service
Eric Miao [Wed, 14 Jan 2009 11:12:42 +0000 (19:12 +0800)]
[ARM] pxa: remove machine class specific stuffs from serial driver
The only things prevent drivers/serial/pxa.c from being generic enough
are:
1. IER_UUE which can be safely replaced by UART_IER_UUE as defined in
serial_reg.h for PXA
2. __PREG() and FFUART/BTUART/STUART definitions to decide the UART
port name
And removed the un-necessary #include of <mach/...> and <asm/...> headers.
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Eric Miao [Wed, 7 Jan 2009 10:01:51 +0000 (18:01 +0800)]
[ARM] pxa: access GPIO registers by chip so to make it further generic
Let's handle GPIOs by banks, each bank covers up to 32 GPIOs with one set
of registers, and each set of registers start from different offsets.
GPLR GPDR GPSR GPCR GRER GFER GEDR
BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048
BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C
BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050
BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148
BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C
BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150
NOTE:
BANK 3 is only available on PXA27x and later processors.
BANK 4 and 5 are only available on PXA935
1. introduce GPIO_BANK(n) for the offset base of each bank
2. 'struct pxa_gpio_chip' is expanded to include IRQ edge and mask
setings, and saved register values as well, and is dynamically
allocated due to possible bank number ranging from 3 to 6
3. all accesses to GPIO registers are made through 'regbase' within
'pxa_gpio_chip', and register offset
4. introduce several inline functions to simplify the code a bit
5. change IRQ demux handler to base on gpio chips
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Eric Miao [Wed, 7 Jan 2009 03:30:49 +0000 (11:30 +0800)]
[ARM] pxa: move declaration of 'pxa_last_gpio' into <mach/gpio.h>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Eric Miao [Tue, 6 Jan 2009 10:29:01 +0000 (18:29 +0800)]
[ARM] pxa: move GPIO register definitions into <mach/gpio.h>
This makes gpio.c fully independent of pxa-regs.h (except for the
virtual address of the registers).
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Eric Miao [Tue, 6 Jan 2009 10:06:25 +0000 (18:06 +0800)]
[ARM] pxa: move pxa_gpio_mode() outside of generic gpio.c
Looks like we have to live with pxa_gpio_mode() for a while, giving
its presence is actually making gpio.c not generic enough, let's
move it temporarily outside before it can be fully purged.
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Eric Miao [Tue, 6 Jan 2009 09:37:37 +0000 (17:37 +0800)]
[ARM] pxa: move IRQ handling of GPIO 0 and 1 outside of gpio.c
This is part of the work making gpio.c generic enough, the changes
include:
1. move IRQ handling of GPIO 0 and 1 outside (and back into irq.c)
2. pxa_init_gpio() accepts a range for muxed GPIO IRQs, and an IRQ
number for the muxed GPIOs
3. __gpio_is_occupied() and __gpio_is_inverted() are made inline,
and are moved into <mach/gpio.h> instead of generic gpio.c
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Eric Miao [Fri, 2 Jan 2009 11:38:42 +0000 (19:38 +0800)]
[ARM] pxa: move DMA registers definitions into <mach/dma.h>
1. Driver code where pxa_request_dma() is called will most likely
reference DMA registers as well, and it is really unnecessary
to include pxa-regs.h just for this. Move the definitions into
<mach/dma.h> and make relevant drivers include it instead of
<mach/pxa-regs.h>.
2. Introduce DMAC_REGS_VIRT as the virtual address base for these
DMA registers. This allows later processors to re-use the same
IP while registers may start at different I/O address.
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Eric Miao [Fri, 2 Jan 2009 08:26:33 +0000 (16:26 +0800)]
[ARM] pxa: allow DMA controller IRQ being specified
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Eric Miao [Fri, 2 Jan 2009 15:17:22 +0000 (23:17 +0800)]
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
Considering the header mess ATM, it is not always possible to include
the correct header files within board code. Let's keep this simple:
<mach/pxa25x.h> - for pxa25x based platforms
<mach/pxa27x.h> - for pxa27x based platforms
<mach/pxa300.h> - for pxa300 based platforms
<mach/pxa320.h> - for pxa320 based platforms
<mach/pxa930.h> - for pxa930 based platforms
NOTE:
1. one header one board file, they are not compatible (i.e. they have
conflicting definitions which won't compile if included together).
2. Unless strictly necessary, the following header files are considered
to be SoC files use _only_, and is not recommended to be included in
board code:
<mach/hardware.h>
<mach/pxa-regs.h>
<mach/pxa2xx-regs.h>
<mach/pxa3xx-regs.h>
<mach/mfp.h>
<mach/mfp-pxa2xx.h>
<mach/mfp-pxa25x.h>
<mach/mfp-pxa27x.h>
<mach/mfp-pxa3xx.h>
<mach/mfp-pxa300.h>
<mach/mfp-pxa320.h>
<mach/mfp-pxa930.h>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Philipp Zabel [Mon, 9 Feb 2009 16:34:09 +0000 (17:34 +0100)]
[ARM] pxa/magician: remove unused forward declaration of pasic3
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Philipp Zabel [Mon, 9 Feb 2009 16:34:08 +0000 (17:34 +0100)]
[ARM] pxa/magician: default to backlight trigger for keypad illumination
Default to the same behaviour as the shipped WinCE system.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Philipp Zabel [Mon, 9 Feb 2009 16:34:07 +0000 (17:34 +0100)]
[ARM] pxa/magician: register pda_power IRQs as rising/falling edge
so they can be shared with gpio_vbus.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Philipp Zabel [Mon, 9 Feb 2009 16:34:06 +0000 (17:34 +0100)]
[ARM] pxa/magician: select PXA_SSP for touchscreen and sound
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Philipp Zabel [Mon, 9 Feb 2009 16:34:05 +0000 (17:34 +0100)]
[ARM] pxa/magician: fix htc-egpio resource size
Fixes an off-by-one error.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Eric Miao [Mon, 9 Mar 2009 13:21:07 +0000 (21:21 +0800)]
Merge branch 'devel' of ssh:///home/rmk/linux-2.6-arm into devel
Eric Miao [Mon, 9 Mar 2009 13:20:23 +0000 (21:20 +0800)]
Merge branch 'fix' of git://git./linux/kernel/git/ycmiao/pxa-linux-2.6 into devel
Ryan Mallon [Mon, 2 Mar 2009 20:27:38 +0000 (21:27 +0100)]
[ARM] 5414/2: ep93xx m2p dma core
Add m2p dma support to the ep93xx
Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Ryan Mallon [Wed, 25 Feb 2009 21:22:38 +0000 (22:22 +0100)]
[ARM] 5413/1: Add ep93xx dma m2p clocks
Add the clocks for ep93xx m2p dma engine.
Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Jean-Christop PLAGNIOL-VILLARD [Wed, 25 Feb 2009 03:20:40 +0000 (04:20 +0100)]
[ARM] 5412/1: XSCALE: add ice dcc support
SCALE: add ice dcc support
Tested on the ixp425 with the ice PEEDI
Ack-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Sat, 21 Feb 2009 21:42:50 +0000 (21:42 +0000)]
Merge branch 'dma' into devel
Conflicts:
arch/arm/plat-mxc/dma-mx1-mx2.c
Russell King [Sat, 21 Feb 2009 21:38:56 +0000 (21:38 +0000)]
[ARM] dma: RiscPC: don't modify DMA SG entries
We should not be modifying the scatterlist passed to us from the
driver code; doing so breaks assumptions made by the DMA API code,
and could cause problems if the driver retries a transfer using an
old scatterlist.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Sat, 21 Feb 2009 21:36:22 +0000 (21:36 +0000)]
[ARM] dma: move IOMD and floppy DMA structures to RiscPC DMA code
There's no point these being in a generic include file when they're
only used in arch/arm/mach-rpc/dma.c.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Mark Brown [Mon, 16 Feb 2009 19:39:19 +0000 (20:39 +0100)]
[ARM] 5399/1: [AT91] Configure MCLK and SSC for AT91SAMG20-EK
The AT91SAM20-EK has a WM8731 attached to it with MCLK supplied from
PCLK0 and the digital audio interface supplied by SSC0.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Dmitry Artamonow [Fri, 20 Feb 2009 09:18:08 +0000 (10:18 +0100)]
[ARM] 5408/1: SA1100: update defconfigs after h3800 removal
Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Dmitry Artamonow [Fri, 20 Feb 2009 09:16:01 +0000 (10:16 +0100)]
[ARM] 5407/1: SA1100: drop broken for ages iPAQ h3800 support
Code has never been in buildable state since initial
merge.
Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Hartley Sweeten [Thu, 19 Feb 2009 16:13:45 +0000 (17:13 +0100)]
[ARM] 5406/1: ep93xx: remove unneeded header in ohci-ep93xx.c
Remove the unneeded #include <mach/hardware.h>
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Catalin Marinas [Thu, 12 Feb 2009 15:00:21 +0000 (16:00 +0100)]
[ARM] 5397/1: RealView: Add support for the ISP1761 USB chip
This patch adds the platform_device and resource structures for the USB
ISP1761 chip, usable with the in-kernel isp1760 driver.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Catalin Marinas [Thu, 12 Feb 2009 14:59:21 +0000 (15:59 +0100)]
[ARM] 5396/1: RealView: Use PATA_PLATFORM to access the CompactFlash
This driver adds the platform_device definitions to allow the use of
CompactFlash on the RealView PB11MPCore and PB-A8 platforms. Note that
the CompactFlash controller is expected to be initialised by the Boot
Monitor and support the True IDE mode.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Catalin Marinas [Thu, 12 Feb 2009 14:58:20 +0000 (15:58 +0100)]
[ARM] 5395/1: RealView: Add support for the DS1338 RTC chip
This chip is on the I2C bus on the RealView and Versatile boards. The
patch adds the i2c_board_info definition for this device and registers
it with the I2C subsystem.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Catalin Marinas [Thu, 12 Feb 2009 14:57:20 +0000 (15:57 +0100)]
[ARM] 5394/1: Add static bus numbering support to i2c-versatile
If dev->id is not -1, the platform code may use static bus numbering
rather than dynamic. The patch also changes the i2c_versatile_init to a
subsys_initcall rather than module_init to make sure it is initialised
before the I2C devices initialisation.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Alexander Schulz [Thu, 8 Jan 2009 17:05:58 +0000 (18:05 +0100)]
[ARM] 5363/1: Shark cleanup and new defconfig
This includes a new defconfig for the Shark and some changes to
the mach-shark directory to avoid namespace pollution and to
switch the rtc to the newer driver.
Signed-off-by: Alexander Schulz <alex@shark-linux.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Daniel Silverstone [Tue, 10 Feb 2009 12:40:38 +0000 (13:40 +0100)]
[ARM] 5377/1: S3C2410-Framebuffer: Fix resume path in S3C2410 framebuffer driver.
Ensure that the LCD engine is correctly re-initialised
and the correct parameters passed ot s3c2410fb_init_registers.
Signed-off-by: Simtec Linux Team <linux@simtec.co.uk>
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Daniel Silverstone [Tue, 10 Feb 2009 12:39:52 +0000 (13:39 +0100)]
[ARM] 5376/1: S3C24XX: Fix sparse errors in platform uncompress.h
Ensure __iomem attribute is __force 'd off in the minimal
__raw_writel() implementation.
Signed-off-by: Simtec Linux Team <linux@simtec.co.uk>
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Catalin Marinas [Thu, 12 Feb 2009 12:56:34 +0000 (13:56 +0100)]
[ARM] 5386/2: unwind: Add Makefile and Kconfig entries for ARM stack unwinding
This patch also makes the frame pointer default to y only if
!ARM_UNWIND. LOCKDEP no longer selects FRAME_POINTER if ARM_UNWIND is
enabled.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Catalin Marinas [Mon, 16 Feb 2009 10:42:09 +0000 (11:42 +0100)]
[ARM] 5385/2: unwind: Add unwinding information to exception entry points
This is needed to allow or stop the unwinding at certain points in the
kernel like exception entries.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Catalin Marinas [Wed, 11 Feb 2009 12:09:54 +0000 (13:09 +0100)]
[ARM] 5384/1: unwind: Add stack unwinding support for loadable modules
This patch adds ELF section parsing for the unwinding tables in loadable
modules together with the PREL31 relocation symbol resolving.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Catalin Marinas [Mon, 16 Feb 2009 10:41:36 +0000 (11:41 +0100)]
[ARM] 5383/2: unwind: Add core support for ARM stack unwinding
This patch adds the main functionality for parsing the stack unwinding
information generated by the ARM EABI toolchains. The unwinding
information consists of an index with a pair of words per function and a
table with unwinding instructions. For more information, see "Exception
Handling ABI for the ARM Architecture" at:
http://infocenter.arm.com/help/topic/com.arm.doc.subset.swdev.abi/index.html
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Catalin Marinas [Wed, 11 Feb 2009 12:07:53 +0000 (13:07 +0100)]
[ARM] 5382/1: unwind: Reorganise the stacktrace support
This patch changes the walk_stacktrace and its callers for easier
integration of stack unwinding. The arch/arm/kernel/stacktrace.h file is
also moved to arch/arm/include/asm/stacktrace.h.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Catalin Marinas [Wed, 11 Feb 2009 12:06:53 +0000 (13:06 +0100)]
[ARM] 5381/1: unwind: Reorganise the traps.c code
This patch moves code around in the arch/arm/kernel/traps.c file for
easier integration of the stack unwinding support.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
wanzongshun [Thu, 12 Feb 2009 01:57:21 +0000 (02:57 +0100)]
[ARM] 5393/1: Add W90P910 EVB NOR flash driver
Add W90P910 Evaluate Board NOR flash driver support,
The EV Board default support W19B320ABT7H of Winbond inc.
Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
wanzongshun [Thu, 12 Feb 2009 01:56:04 +0000 (02:56 +0100)]
[ARM] 5392/1: Delete redundant macros for w90p910
Delete the macros W90X900_RES and W90X900_DEVICE
I thought it will be better to define the structures
for each device directly.
Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Catalin Marinas [Wed, 11 Feb 2009 12:14:57 +0000 (13:14 +0100)]
[ARM] 5389/1: Make sure the pmd entries are visible by the secondary CPU
The __cpu_up() function in arch/arm/kernel/smp.c sets the pmd entries
without flushing or cleaning them.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Catalin Marinas [Wed, 11 Feb 2009 12:13:56 +0000 (13:13 +0100)]
[ARM] 5388/1: Add hwcap bits for VFPv3 and VFPv3D16
The VFPv3D16 is a VFPv3 CPU configuration where only 16 double registers
are present, as the VFPv2 configuration. This patch adds the
corresponding hwcap bits so that applications or debuggers have more
information about the supported features.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Catalin Marinas [Wed, 11 Feb 2009 12:12:56 +0000 (13:12 +0100)]
[ARM] 5387/1: Add ptrace VFP support on ARM
This patch adds ptrace support for setting and getting the VFP registers
using PTRACE_SETVFPREGS and PTRACE_GETVFPREGS. The user_vfp structure
defined in asm/user.h contains 32 double registers (to cover VFPv3 and
Neon hardware) and the FPSCR register.
Cc: Paul Brook <paul@codesourcery.com>
Cc: Daniel Jacobowitz <dan@codesourcery.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Ryan Mallon [Tue, 10 Feb 2009 20:02:08 +0000 (21:02 +0100)]
[ARM] 5373/2: Add gpiolib support to AT91
Add support for gpiolib, including debugfs output, to the AT91 family.
The at91_get/set_gpio_value calls still exist since they are used by the
atmel serial driver.
Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Zbynek Michl [Thu, 1 Jan 2009 23:26:13 +0000 (00:26 +0100)]
[ARM] 5355/1: Adding support for the HTC Himalaya and its framebuffer
Patch adds support for the HTC Himalaya device. It includes hardware definitions and w100fb support.
Signed-off-by: Zbynek Michl <Zbynek.Michl@seznam.cz>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Jaya Kumar [Thu, 1 Jan 2009 16:51:01 +0000 (17:51 +0100)]
[ARM] 5354/1: mach-pxa: add AM300 platform driver v3
This patch adds support for the AM300 platform driver which uses the
E-Ink broadsheetfb display driver.
Cc: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Jaya Kumar [Thu, 1 Jan 2009 16:49:19 +0000 (17:49 +0100)]
[ARM] 5353/1: fbdev: add E-Ink Broadsheet controller support v3
This patch adds support for the E-Ink Broadsheet display controller.
Cc: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Kristoffer Ericson [Wed, 4 Feb 2009 15:47:38 +0000 (16:47 +0100)]
[ARM] 5375/1: PATCH - update jornada720.c to reflect driver additions
This patch updates the list of devices activated at init
to also include the keyboard and touchscreen structs.
We also remove a non-needed #ifdef.
Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
wanzongshun [Wed, 4 Feb 2009 04:01:38 +0000 (05:01 +0100)]
[ARM] 5374/1: The w90p910 uart0 driver patch
Add W90P910 UART0 support,the W90P910 UART0 is 8250 series.
Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Daniel Silverstone [Thu, 29 Jan 2009 10:33:10 +0000 (11:33 +0100)]
[ARM] 5372/1: ACS5K: Core board support for the ACS-5000
This patch provides the core board support for the Brivo Systems
LLC ACS-5000 master board for automated door/card-reader etc
management.
Signed-off-by: Daniel Silverstone <dsilvers@simtec.co.uk>
Signed-off-by: Vincent Sanders <vince@simtec.co.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Hartley Sweeten [Mon, 26 Jan 2009 16:24:51 +0000 (17:24 +0100)]
[ARM] 5371/1: ep93xx: add i2c device to
edb9307a
Add the on-board rtc i2c device to the
edb9307a platform init.
The EP93xx based
EDB9307A dev board has an on-board ISL1208 RTC
connected to the I2C bus. Now that the core code supports the
I2C bus, this patch will add support for the device.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Sat, 7 Feb 2009 21:43:28 +0000 (21:43 +0000)]
Merge branch 'devel' of git://git./linux/kernel/git/ycmiao/pxa-linux-2.6 into devel
Conflicts:
arch/arm/configs/magician_defconfig
Linus Torvalds [Sat, 7 Feb 2009 02:37:22 +0000 (18:37 -0800)]
Merge git://git./linux/kernel/git/mason/btrfs-unstable
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (37 commits)
Btrfs: Make sure dir is non-null before doing S_ISGID checks
Btrfs: Fix memory leak in cache_drop_leaf_ref
Btrfs: don't return congestion in write_cache_pages as often
Btrfs: Only prep for btree deletion balances when nodes are mostly empty
Btrfs: fix btrfs_unlock_up_safe to walk the entire path
Btrfs: change btrfs_del_leaf to drop locks earlier
Btrfs: Change btrfs_truncate_inode_items to stop when it hits the inode
Btrfs: Don't try to compress pages past i_size
Btrfs: join the transaction in __btrfs_setxattr
Btrfs: Handle SGID bit when creating inodes
Btrfs: Make btrfs_drop_snapshot work in larger and more efficient chunks
Btrfs: Change btree locking to use explicit blocking points
Btrfs: hash_lock is no longer needed
Btrfs: disable leak debugging checks in extent_io.c
Btrfs: sort references by byte number during btrfs_inc_ref
Btrfs: async threads should try harder to find work
Btrfs: selinux support
Btrfs: make btrfs acls selectable
Btrfs: Catch missed bios in the async bio submission thread
Btrfs: fix readdir on 32 bit machines
...
Tyler Hicks [Sat, 7 Feb 2009 00:06:51 +0000 (18:06 -0600)]
eCryptfs: Regression in unencrypted filename symlinks
The addition of filename encryption caused a regression in unencrypted
filename symlink support. ecryptfs_copy_filename() is used when dealing
with unencrypted filenames and it reported that the new, copied filename
was a character longer than it should have been.
This caused the return value of readlink() to count the NULL byte of the
symlink target. Most applications don't care about the extra NULL byte,
but a version control system (bzr) helped in discovering the bug.
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 7 Feb 2009 02:36:02 +0000 (18:36 -0800)]
Merge branch 'x86/fixes' of git://git./linux/kernel/git/frob/linux-2.6-roland
* 'x86/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland:
x86-64: fix int $0x80 -ENOSYS return
Roland McGrath [Sat, 7 Feb 2009 02:15:18 +0000 (18:15 -0800)]
x86-64: fix int $0x80 -ENOSYS return
One of my past fixes to this code introduced a different new bug.
When using 32-bit "int $0x80" entry for a bogus syscall number,
the return value is not correctly set to -ENOSYS. This only happens
when neither syscall-audit nor syscall tracing is enabled (i.e., never
seen if auditd ever started). Test program:
/* gcc -o int80-badsys -m32 -g int80-badsys.c
Run on x86-64 kernel.
Note to reproduce the bug you need auditd never to have started. */
#include <errno.h>
#include <stdio.h>
int
main (void)
{
long res;
asm ("int $0x80" : "=a" (res) : "0" (99999));
printf ("bad syscall returns %ld\n", res);
return res != -ENOSYS;
}
The fix makes the int $0x80 path match the sysenter and syscall paths.
Reported-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Roland McGrath <roland@redhat.com>
Linus Torvalds [Sat, 7 Feb 2009 02:10:04 +0000 (18:10 -0800)]
Merge branch 'to-linus' of git://git./linux/kernel/git/frob/linux-2.6-roland
* 'to-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland:
elf core dump: fix get_user use
Roland McGrath [Sat, 7 Feb 2009 01:34:07 +0000 (17:34 -0800)]
elf core dump: fix get_user use
The elf_core_dump() code does its work with set_fs(KERNEL_DS) in force,
so vma_dump_size() needs to switch back with set_fs(USER_DS) to safely
use get_user() for a normal user-space address.
Checking for VM_READ optimizes out the case where get_user() would fail
anyway. The vm_file check here was already superfluous given the control
flow earlier in the function, so that is a cleanup/optimization unrelated
to other changes but an obvious and trivial one.
Reported-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Roland McGrath <roland@redhat.com>
Dave Kleikamp [Fri, 6 Feb 2009 20:59:26 +0000 (14:59 -0600)]
vfs: Don't call attach_nobh_buffers() with an empty list
This is a modification of a patch by Bill Pemberton <wfp5p@virginia.edu>
nobh_write_end() could call attach_nobh_buffers() with head == NULL.
This would result in a trap when attach_nobh_buffers() attempted to
access bh->b_this_page.
This can be illustrated by running the writev01 testcase from LTP on jfs.
This error was introduced by commit
5b41e74a "vfs: fix data leak in
nobh_write_end()". That patch did not take into account that if
PageMappedToDisk() is true upon entry to nobh_write_begin(), then no
buffers will be allocated for the page. In that case, we won't have to
worry about a failed write leaving unitialized data in the page.
Of course, head != NULL implies !page_has_buffers(page), so no need to
test both.
Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Dmitri Monakhov <dmonakhov@openvz.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 6 Feb 2009 19:14:23 +0000 (11:14 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
ALSA: hda - Add missing COEF initialization for ALC887
ALSA: hda - Add missing initialization for ALC272
sound: usb-audio: handle wMaxPacketSize for FIXED_ENDPOINT devices
ALSA: hda - Fix misc workqueue issues
ALSA: hda - Add quirk for FSC Amilo Xi2550
Linus Torvalds [Fri, 6 Feb 2009 16:48:16 +0000 (08:48 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ieee1394/linux1394-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
ieee1394: dv1394: move deprecation message from module init to file open
firewire: core: Remove card from list of cards when enable fails
Uwe Kleine-König [Fri, 6 Feb 2009 13:53:18 +0000 (14:53 +0100)]
Add Sascha Hauer to .mailmap
This fixes the shortlog attribution e.g. for
106757b38fff
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Uwe Kleine-König [Fri, 6 Feb 2009 13:53:19 +0000 (14:53 +0100)]
add another mailmap entry for Uwe Kleine-König
I created commit
7971db5a4b4176ad5df590fce07a962c643a2740 on a machine
where I forgot to set user.name and user.email before. The default
values were not optimal.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Li Zefan [Fri, 6 Feb 2009 08:17:19 +0000 (08:17 +0000)]
fork.c: fix NULL pointer dereference when nr_threads == threads-max
I happened to forked lots of processes, and hit NULL pointer dereference.
It is because in copy_process() after checking max_threads, 0 is returned
but not -EAGAIN.
The bug is introduced by "CRED: Detach the credentials from task_struct"
(commit
f1752eec6145c97163dbce62d17cf5d928e28a27).
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Chris Mason [Fri, 6 Feb 2009 16:35:57 +0000 (11:35 -0500)]
Btrfs: Make sure dir is non-null before doing S_ISGID checks
The S_ISGID check in btrfs_new_inode caused an oops during subvol creation
because sometimes the dir is null.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Linus Torvalds [Fri, 6 Feb 2009 15:41:10 +0000 (07:41 -0800)]
Merge branch 'for-linus' of git://neil.brown.name/md
* 'for-linus' of git://neil.brown.name/md:
md: Ensure an md array never has too many devices.
md: Fix a bug in linear.c causing which_dev() to return the wrong device.
md: Allow read error in a single drive raid1 to be passed up.
Stefan Richter [Tue, 3 Feb 2009 16:54:31 +0000 (17:54 +0100)]
ieee1394: dv1394: move deprecation message from module init to file open
On many Linux installations, the dv1394 driver will be auto-loaded
whenever an AV/C device (e.g. camcorder or audio device) is plugged in.
An irritating message would then appear in the kernel log.
Defer this message to until a dv1394 character device file is actually
used by a program. Also include the program name in the message and
update the message slightly.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Takashi Iwai [Fri, 6 Feb 2009 13:25:13 +0000 (14:25 +0100)]
Merge branch 'fix/usb-audio' into for-linus
Takashi Iwai [Fri, 6 Feb 2009 13:25:04 +0000 (14:25 +0100)]
Merge branch 'fix/hda' into for-linus
Takashi Iwai [Fri, 6 Feb 2009 11:46:59 +0000 (12:46 +0100)]
ALSA: hda - Add missing COEF initialization for ALC887
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 6 Feb 2009 11:45:52 +0000 (12:45 +0100)]
ALSA: hda - Add missing initialization for ALC272
ALC272 needs EAPD for speaker outputs as well as other similar ALC
codecs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Clemens Ladisch [Fri, 6 Feb 2009 07:13:07 +0000 (08:13 +0100)]
sound: usb-audio: handle wMaxPacketSize for FIXED_ENDPOINT devices
For audio devices that do not have proper audio descriptors (e.g.,
Edirol UA-20), we use hardcoded parameters from our quirks list.
However, we must still read the maximum packet size from the standard
endpoint descriptor; otherwise, we might use packets that are too big
and therefore rejected by the USB core.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
NeilBrown [Fri, 6 Feb 2009 07:02:46 +0000 (18:02 +1100)]
md: Ensure an md array never has too many devices.
Each different metadata format supported by md supports a
different maximum number of devices.
We really should be enforcing this maximum in the kernel, but
we aren't quite doing that properly.
We currently only enforce it at the 'hot_add' point, which is an
older interface which is not used by current userspace.
We need to also enforce it at 'add_new_disk' time for active arrays
and at 'do_md_run' time when starting a new array.
So move the test from 'hot_add' into 'bind_rdev_to_array' which is
called from both 'hot_add' and 'add_new_disk, and add a new
test in 'analyse_sbs' which is called from 'do_md_run'.
This bug (or missing feature) has been around "forever" and so
the patch is suitable for any -stable that is currently maintained.
Cc: stable@kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
Andre Noll [Fri, 6 Feb 2009 04:10:52 +0000 (15:10 +1100)]
md: Fix a bug in linear.c causing which_dev() to return the wrong device.
ab5bd5cbc8d4b868378d062eed3d4240930fbb86 introduced the following
bug in linear software raid for large arrays on 32 bit machines:
which_dev() computes the device holding a given sector by shifting
down the sector number to a 32 bit range, dividing by the array
spacing and looking up the resulting index in the hash table of
the array.
Because the computed index might be slightly too small, a loop at
the end of which_dev() increases the index until the given sector
actually falls into the range of the device associated with that index.
The changes of the above mentioned commit caused this loop to check
whether the _index_ rather than the sector number is small enough,
effectively bypassing the loop and thus possibly returning the wrong
device.
As reported by Simon Kirby, this leads to errors such as
linear_make_request: Sector
2340486136 out of bounds on dev sdi:
156301312 sectors, offset
2109870464
Fix this bug by introducing a local variable for the index so that
the variable containing the passed sector is left unchanged.
Cc: stable@kernel.org
Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: NeilBrown <neilb@suse.de>
NeilBrown [Fri, 6 Feb 2009 04:06:47 +0000 (15:06 +1100)]
md: Allow read error in a single drive raid1 to be passed up.
If a raid1 only has a single working device and gets a read error,
we choose to simply return that error up to the filesystem (or whatever)
rather than failing the whole array.
However the codes doesn't quite do that. We attempt a readbalance
which allocates the same drive, so we retry the read - indefinitely.
Instead: If read_balance in the error case chooses the same drive that just
failed, treat it as a failure and don't retry.
Signed-off-by: NeilBrown <neilb@suse.de>
Masami Hiramatsu [Thu, 5 Feb 2009 22:12:39 +0000 (17:12 -0500)]
prevent kprobes from catching spurious page faults
Prevent kprobes from catching spurious faults which will cause infinite
recursive page-fault and memory corruption by stack overflow.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: <stable@kernel.org> [2.6.28.x]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Fri, 6 Feb 2009 00:32:27 +0000 (00:32 +0000)]
braino in sg_ioctl_trans()
... and yes, gcc is insane enough to eat that without complaint.
We probably want sparse to scream on those...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 6 Feb 2009 00:12:38 +0000 (16:12 -0800)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/mfasheh/ocfs2
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
Revert "configfs: Silence lockdep on mkdir(), rmdir() and configfs_depend_item()"
Linus Torvalds [Fri, 6 Feb 2009 00:11:54 +0000 (16:11 -0800)]
Merge branch 'sh/for-2.6.29' of git://git./linux/kernel/git/lethal/sh-2.6
* 'sh/for-2.6.29' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
sh: Fix up T-bit error handling in SH-4A mutex fastpath.
sh: Fix up spurious syscall restarting.
sh: fcnvds fix with denormalized numbers on SH-4 FPU.
sh: Only reserve memory under CONFIG_ZERO_PAGE_OFFSET when it != 0.
sh: Handle calling csum_partial with misaligned data
sh: ap325rxa: Enable ov772x in defconfig.
sh: ap325rxa: Add ov772x support.
sh: ap325rxa: control camera power toggling.
sh: mach-migor: Enable ov772x and tw9910 in defconfig.
Linus Torvalds [Fri, 6 Feb 2009 00:11:32 +0000 (16:11 -0800)]
Merge git://git./linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
Revert "tcp: Always set urgent pointer if it's beyond snd_nxt"
ipv6: Copy cork options in ip6_append_data
udp: Fix UDP short packet false positive
gianfar: Fix potential soft reset race
gianfar: Fix BD_LENGTH_MASK definition
cxgb3: Fix lro switch
iwlwifi: save PCI state before suspend, restore after resume
iwlwifi: clean key table in iwl_clear_stations_table
David S. Miller [Thu, 5 Feb 2009 23:38:31 +0000 (15:38 -0800)]
Revert "tcp: Always set urgent pointer if it's beyond snd_nxt"
This reverts commit
64ff3b938ec6782e6585a83d5459b98b0c3f6eb8.
Jeff Chua reports that it breaks rlogin for him.
Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Thu, 5 Feb 2009 23:15:50 +0000 (15:15 -0800)]
ipv6: Copy cork options in ip6_append_data
As the options passed to ip6_append_data may be ephemeral, we need
to duplicate it for corking. This patch applies the simplest fix
which is to memdup all the relevant bits.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 5 Feb 2009 23:08:11 +0000 (15:08 -0800)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-2.6
Jesper Dangaard Brouer [Thu, 5 Feb 2009 23:05:45 +0000 (15:05 -0800)]
udp: Fix UDP short packet false positive
The UDP header pointer assignment must happen after calling
pskb_may_pull(). As pskb_may_pull() can potentially alter the SKB
buffer.
This was exposted by running multicast traffic through the NIU driver,
as it won't prepull the protocol headers into the linear area on
receive.
Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexey Dobriyan [Thu, 5 Feb 2009 21:30:05 +0000 (00:30 +0300)]
seq_file: fix big-enough lseek() + read()
lseek() further than length of the file will leave stale ->index
(second-to-last during iteration). Next seq_read() will not notice
that ->f_pos is big enough to return 0, but will print last item
as if ->f_pos is pointing to it.
Introduced in commit
cb510b8172602a66467f3551b4be1911f5a7c8c2
aka "seq_file: more atomicity in traverse()".
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Biederman [Wed, 4 Feb 2009 23:12:25 +0000 (15:12 -0800)]
seq_file: move traverse so it can be used from seq_read
In 2.6.25 some /proc files were converted to use the seq_file
infrastructure. But seq_files do not correctly support pread(), which
broke some usersapce applications.
To handle pread correctly we can't assume that f_pos is where we left it
in seq_read. So move traverse() so that we can eventually use it in
seq_read and do thus some day support pread().
Signed-off-by: Eric Biederman <ebiederm@xmission.com>
Cc: Paul Turner <pjt@google.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dean Nelson [Wed, 4 Feb 2009 23:12:24 +0000 (15:12 -0800)]
sgi-xp: fix writing past the end of kzalloc()'d space
A missing type cast results in writing way beyond the end of a kzalloc()'d
memory segment resulting in slab corruption. But it seems like the better
solution is to define ->recv_msg_slots as a 'void *' rather than a
'struct xpc_notify_mq_msg_uv *' and add the type cast.
Signed-off-by: Dean Nelson <dcn@sgi.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexey Dobriyan [Wed, 4 Feb 2009 23:12:21 +0000 (15:12 -0800)]
alpha: fixup BUG macro
Do usual do {} while (0) dance, otherwise
fs/gfs2/util.c:99: error: expected expression before 'else'
drivers/scsi/lpfc/lpfc_sli.c:363: error: expected expression before 'else'
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dan Carpenter [Wed, 4 Feb 2009 23:12:20 +0000 (15:12 -0800)]
sx.c: fix missed unlock_kernel() on error path in sx_fw_ioctl()
If we return directly with -EPERM then lock_kernel() is still held.
This was found with a code checker (http://repo.or.cz/w/smatch.git/).
[akpm@linux-foundation.org: fix another such path - missed func_exit()]
Signed-off-by: Dan Carpenter <error27@gmail.com>
Cc: <R.E.Wolff@BitWizard.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Wed, 4 Feb 2009 23:12:20 +0000 (15:12 -0800)]
atyfb: fix CONFIG_ namespace violations
Fix namespace violations by changing non-kconfig CONFIG_ names to CNFG_*.
Fixes breakage in staging/, which adds a real CONFIG_PANEL.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Manish Katiyar [Wed, 4 Feb 2009 23:12:19 +0000 (15:12 -0800)]
rtc-ds1390: fix compilation warnings in drivers/rtc/rtc-ds1390.c
drivers/rtc/rtc-ds1390.c:125: warning: unused variable 'rtc'
Signed-off-by: Manish Katiyar <mkatiyar@gmail.com>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mike Rapoport [Wed, 4 Feb 2009 23:12:18 +0000 (15:12 -0800)]
drivers/video/backlight: rename da903x to da903x_bl
Currently both da903x backlight and voltage reulator drivers have the
same name. Rename the backlight driver to allow use of both drivers as
modules.
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Eric Miao <eric.miao@marvell.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hans-Christian Egtvedt [Wed, 4 Feb 2009 23:12:17 +0000 (15:12 -0800)]
atmel-ssc: fix misuse of dev_dbg when requested ssc instance is not found
The ssc pointer is not valid when the id is not found in the list.
Convert the message from a debug one into an error message and avoid
dereferencing the bad pointer.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Huang Weiyi <weiyi.huang@gmail.com>
Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Carsten Otte [Wed, 4 Feb 2009 23:12:16 +0000 (15:12 -0800)]
do_wp_page: fix regression with execute in place
Fix do_wp_page for VM_MIXEDMAP mappings.
In the case where pfn_valid returns 0 for a pfn at the beginning of
do_wp_page and the mapping is not shared writable, the code branches to
label `gotten:' with old_page == NULL.
In case the vma is locked (vma->vm_flags & VM_LOCKED), lock_page,
clear_page_mlock, and unlock_page try to access the old_page.
This patch checks whether old_page is valid before it is dereferenced.
The regression was introduced by "mlock: mlocked pages are unevictable"
(commit
b291f000393f5a0b679012b39d79fbc85c018233).
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: <stable@kernel.org> [2.6.28.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Johannes Weiner [Wed, 4 Feb 2009 23:12:14 +0000 (15:12 -0800)]
wait: prevent exclusive waiter starvation
With exclusive waiters, every process woken up through the wait queue must
ensure that the next waiter down the line is woken when it has finished.
Interruptible waiters don't do that when aborting due to a signal. And if
an aborting waiter is concurrently woken up through the waitqueue, noone
will ever wake up the next waiter.
This has been observed with __wait_on_bit_lock() used by
lock_page_killable(): the first contender on the queue was aborting when
the actual lock holder woke it up concurrently. The aborted contender
didn't acquire the lock and therefor never did an unlock followed by
waking up the next waiter.
Add abort_exclusive_wait() which removes the process' wait descriptor from
the waitqueue, iff still queued, or wakes up the next waiter otherwise.
It does so under the waitqueue lock. Racing with a wake up means the
aborting process is either already woken (removed from the queue) and will
wake up the next waiter, or it will remove itself from the queue and the
concurrent wake up will apply to the next waiter after it.
Use abort_exclusive_wait() in __wait_event_interruptible_exclusive() and
__wait_on_bit_lock() when they were interrupted by other means than a wake
up through the queue.
[akpm@linux-foundation.org: coding-style fixes]
Reported-by: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Mentored-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Chuck Lever <cel@citi.umich.edu>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: <stable@kernel.org> ["after some testing"]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Wed, 4 Feb 2009 23:12:13 +0000 (15:12 -0800)]
maintainers: general@lists.openfabrics.org is moderated
I got the "list is moderated message," so add it here.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Martin Kebert [Wed, 4 Feb 2009 23:12:12 +0000 (15:12 -0800)]
lis3lv02d: add axes knowledge for HP 6710
Add support for the HP laptops of model 6710x for having correctly setup
axes.
Signed-off-by: Martin Kebert <gkmarty@gmail.com>
Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Herrmann [Wed, 4 Feb 2009 23:12:11 +0000 (15:12 -0800)]
lis3lv02d: add axes knowledge for HP 6730
Add support for the HP laptops of model 6730x for having correctly setup
axes.
Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Piel [Wed, 4 Feb 2009 23:12:11 +0000 (15:12 -0800)]
lis3lv02d: add axes knowledge for HP 6530
Add support for the HP laptops of model 6530x for having correctly setup
axes.
Reported-by: Jerome Poulin <jeromepoulin@gmail.com>
Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>