drm/i915: Try to detect sudden loss of MMIO access

In rare circumstances bugs in PCI programming, broken BIOS, or failing
hardware can cause the CPU to lose access to the MMIO BAR on dgfx
platforms.  This is a pretty catastrophic failure since all register
reads come back with values of 0xFFFFFFFF.  Let's check for this special
case while doing our usual checks for unclaimed registers; the FPGA_DBG
register we use for those checks on modern platforms has some unused
bits that will always read back as 0 when things are behaving properly;
we can use them as canaries to detect when MMIO itself has suddenly
broken and try to print a more informative error message in the logs.

v2: Let the detection function still return 'true' if we've lost our
    MMIO access.  We'll still get an extra false positive message about
    an unclaimed register access, but we'll still honor the 'mmio_debug'
    limit and not spam the log.  (Lucas)

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210212211925.3418280-2-matthew.d.roper@intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>

drm/i915: FPGA_DBG is display-specific

Although the bspec's description doesn't make it very clear, the
hardware architects have confirmed that the FPGA_DBG register that we
use to check for unclaimed MMIO accesses is display-specific and will
only properly flag unclaimed MMIO transactions for registers in the
display range.  If a platform doesn't have display, FPGA_DBG itself will
not be available and should not be checked.  Let's move the feature flag
into intel_device_info.display to more accurately reflect this.

Given that we now know FPGA_DBG is display-specific, it could be argued
that we should only check it on out intel_de_*() functions.  However
let's not make that change right now; keeping the checks in all of the
existing locations still helps us catch cases where regular
intel_uncore_*() functions use bad MMIO offset math / base addresses and
accidentally wind up landing within an unused area within the display
MMIO range.  It will also help catch cases where userspace-initiated
MMIO (e.g., IGT's intel_reg tool) attempt to read bad offsets within the
display range.

v2:  Add missing hunk with the update to the HAS_FPGA_DBG_UNCLAIMED
     macro.  (CI)

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210212222049.3516344-1-matthew.d.roper@intel.com

drm/i915/gen9_bc: Add W/A for missing STRAP config on TGP PCH + CML combos

Apparently the new gen9_bc platforms that Intel has introduced don't
provide us with a STRAP config register to read from for initializing DDI
B, C, and D detection. So, workaround this by hard-coding our strap config
in intel_setup_outputs().

Changes since v4:
* Split this into it's own commit

Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
[originally from Tejas's work]
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209212832.1401815-5-lyude@redhat.com

drm/i915/gen9_bc: Introduce HPD pin mappings for TGP PCH + CML combos

Next, let's start introducing the HPD pin mappings for Intel's new gen9_bc
platform in order to make hotplugging display connectors work. Since
gen9_bc is just a TGP PCH along with a CML CPU, except with the same HPD
mappings as ICL, we simply add a skl_hpd_pin function that is shared
between gen9 and gen9_bc which handles both the traditional gen9 HPD pin
mappings and the Icelake HPD pin mappings that gen9_bc uses.

Changes since v4:
* Split this into its own commit
* Introduce skl_hpd_pin() like vsyrjala suggested and use that instead of
  sticking our HPD pin mappings in TGP code

Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
[originally from Tejas's work]
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209212832.1401815-4-lyude@redhat.com

i915/perf: Drop the check for report reason in OA

After fixing the OA_TAIL_PTR corruption, there are no more reports with
reason field of zero. Drop the check for report reason.

Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210210190106.8586-1-umesh.nerlige.ramappa@intel.com

drm/i915/debugfs: HDCP capability enc NULL check

DP-MST connector encoder initializes at modeset
Adding a connector->encoder NULL check in order to
avoid any NULL pointer dereference.
intel_hdcp_enable() already handle this but debugfs
can also invoke the intel_{hdcp,hdcp2_capable}.
Handling it gracefully.

v2:
- Use necessary lock and NULL check in
  i915_hdcp_sink_capability_show. [Imre]

Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210211140502.22786-1-anshuman.gupta@intel.com

drm/i915/display: fix comment on skl straps

We are not checking for specific SKUs and feedback from HW team is that
it may not work since it was supposed to be fixed by the same time
straps stopped to be used. So, just update comment.

v2: Instead of removing the check, just update the comment since
feedback from HW team was that it actually may not work

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200625001120.22810-3-lucas.demarchi@intel.com

drm/i915/gen9_bc: Introduce TGP PCH DDC pin mappings

With the introduction of gen9_bc, where Intel combines Cometlake CPUs with
a Tigerpoint PCH, we'll need to introduce new DDC pin mappings for this
platform in order to make all of the display connectors work. So, let's do
that.

Changes since v4:
* Split this into it's own patch - vsyrjala
Changes since v5:
* Rename gen9bc_port_to_ddc_pin() to gen9bc_tgp_port_to_ddc_pin()

Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
[originally from Tejas's work]
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209212832.1401815-3-lyude@redhat.com

drm/i915/gen9_bc: Recognize TGP PCH + CML combos

Since Intel has introduced the gen9_bc platform, a combination of
Tigerpoint PCHs and CML CPUs, let's recognize such platforms as valid and
avoid WARNing on them.

Changes since v4:
* Split this into it's own patch - vsyrjala

Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
[originally from Tejas's work]
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209212832.1401815-2-lyude@redhat.com

drm/i915/display: Handle lane polarity for DDI port

Lane Reversal is required for some of the DDI ports. This information
is populated in VBT and driver should read the same and set the
polarity while enabling the port. This patch handles the same.

It helps fix a display blankout issue on DP ports on certain
platforms.

Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210211114209.23866-1-uma.shankar@intel.com

drm/i915/display: Add DDR5 and LPDDR5 BW buddy page entries

Set the right BW buddy page mask for new memory types.

BSpec: 49218
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209174238.153278-1-jose.souza@intel.com

drm/i915: Warn when releasing a frontbuffer while in use

Let's scream if we are about to release a frontbuffer which
is still in use.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209021918.16234-3-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Fix overlay frontbuffer tracking

We don't have a persistent fb holding a reference to the frontbuffer
object, so every time we do the get+put we throw the frontbuffer object
immediately away. And so the next time around we get a pristine
frontbuffer object with bits==0 even for the old vma. This confuses
the frontbuffer tracking code which understandably expects the old
frontbuffer to have the overlay's bit set.

Fix this by hanging on to the frontbuffer reference until the next
flip. And just to make this a bit more clear let's track the frontbuffer
explicitly instead of just grabbing it via the old vma.

Cc: stable@vger.kernel.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1136
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209021918.16234-2-ville.syrjala@linux.intel.com
Fixes: 8e7cb1799b4f ("drm/i915: Extract intel_frontbuffer active tracking")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Disallow plane x+w>stride on ilk+ with X-tiling

ilk+ planes get notably unhappy when the plane x+w exceeds
the stride. This wasn't a problem previously because we
always aligned SURF to the closest tile boundary so the
x offset never got particularly large. But now with async
flips we have to align to 256KiB instead and thus this
becomes a real issue.

On ilk/snb/ivb it looks like the accesses just wrap
early to the next tile row when scanout goes past the
SURF+n*stride boundary, hsw/bdw suffer more heavily and
start to underrun constantly. i965/g4x appear to be immune.
vlv/chv I've not yet checked.

Let's borrow another trick from the skl+ code and search
backwards for a better SURF offset in the hopes of getting the
x offset below the limit. IIRC when I ran into a similar issue
on skl years ago it was causing the hardware to fall over
pretty hard as well.

And let's be consistent and include i965/g4x in the check
as well, just in case I just got super lucky somehow when
I wasn't able to reproduce the issue. Not that it really
matters since we still use 4k SURF alignment for i965/g4x
anyway.

Fixes: 6ede6b0616b2 ("drm/i915: Implement async flips for vlv/chv")
Fixes: 4bb18054adc4 ("drm/i915: Implement async flip for ilk/snb")
Fixes: 2a636e240c77 ("drm/i915: Implement async flip for ivb/hsw")
Fixes: cda195f13abd ("drm/i915: Implement async flips for bdw")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209021918.16234-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/tgl+: Make sure TypeC FIA is powered up when initializing it

The TypeC FIA can be powered down if the TC-COLD power state is allowed,
so block the TC-COLD state when initializing the FIA.

Note that this isn't needed on ICL where the FIA is never modular and
which has no generic way to block TC-COLD (except for platforms with a
legacy TypeC port and on those too only via these legacy ports, not via
a DP-alt/TBT port).

Cc: <stable@vger.kernel.org> # v5.10+
Cc: José Roberto de Souza <jose.souza@intel.com>
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3027
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208154303.6839-1-imre.deak@intel.com
Reviewed-by: Jos� Roberto de Souza <jose.souza@intel.com>

i915/perf: Add additional OA formats for gen12

Gen12 supports additional OA formats as compared to what was added
earlier. Include the additional OA formats.

Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208174029.45621-3-umesh.nerlige.ramappa@intel.com

i915/perf: Move OA formats to single array

Variations in OA formats in the different gens has led to creation of
several sparse arrays to store the formats.

Move oa formats into a single array and format_mask to check for
platform specific oa formats.

Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208174029.45621-2-umesh.nerlige.ramappa@intel.com

i915/perf: Store a mask of valid OA formats for a platform

Validity of an OA format is checked by using a sparse array of formats
per gen. Instead maintain a mask of supported formats for a platform in
the perf object.

v2: Use set_bit and test_bit style for the format_mask (Chris)

Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208174029.45621-1-umesh.nerlige.ramappa@intel.com

drm/i915/rkl: Remove require_force_probe protection

Removing force probe protection from RKL platform. Did
not observe warnings, errors, flickering or any visual
defects while doing ordinary tasks like browsing and
editing documents in a two monitor setup.

Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130124855.319226-1-tejaskumarx.surendrakumar.upadhyay@intel.com

drm/i915: Fix HAS_LSPCON macro for platforms between GEN9 and GEN10

Legacy LSPCON chip from MCA and Parade is only used for platforms
between GEN9 and GEN10. Fixing the HAS_LSPCON macro to reflect the same.

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208055554.24357-1-ankit.k.nautiyal@intel.com

drm/i915: refactor skylake scaler code into new file.

This moves the code from various places and consolidates it
into one new file.

v2:
- rename skl_program_plane -> skl_program_plane_scaler (Ville)
- also move skl_pfit_enable, and consequently make some skl_scaler_*
  functions static to skl_scaler.c (Ville)

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2fa703ffc7b96a41c392fd5ebbd2e6e4ffb6fb05.1612536383.git.jani.nikula@intel.com

drm/i915: migrate i9xx plane get config

Migrate this code out like the skylake code.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c003bd458a6bcc703e9e2fb05731fb7124012e8c.1612536383.git.jani.nikula@intel.com

drm/i915: migrate pll enable/disable code to intel_dpll.[ch]

This moves the older i9xx/vlv/chv enable/disable to dpll file.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7fa8c76b0f07f3ede9efd7c1f989f33fbc8c53a3.1612536383.git.jani.nikula@intel.com

drm/i915: move is_ccs_modifier to an inline

There is no need for this to be out of line.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bb73a151b7b780f927edeb7e121449446592805d.1612536383.git.jani.nikula@intel.com

drm/i915: split fb scalable checks into g4x and skl versions

This just cleans these up a bit.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c91d924e93965515d2017dbf3c89c245ff6d52ea.1612536383.git.jani.nikula@intel.com

drm/i915: move pipe update code into crtc. (v2)

Daniel suggested this should move here.

v2: move vrr code.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/738c7aaeb63c7d2357ddd932f18787ec8a3cefeb.1612536383.git.jani.nikula@intel.com

drm/i915: migrate skl planes code new file (v5)

Rework the plane init calls to do the gen test one level higher.

Rework some of the plane helpers so they can live in new file,
there is still some scope to clean up the plane/fb interactions
later.

v2: drop atomic code back, rename file to Ville suggestions,
add header file.
v3: move scaler bits back
v4: drop wrong new includes (Ville)
v5: integrate the ccs gen12 changes
v6: fix unrelated code movement (Ville)

Signed-off-by: Dave Airlie <airlied@redhat.com>
[Jani: fixed up sparse warnings.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4e88a5c6b9ab3b93cc2b6c7d78c26ae86f6abbd0.1612536383.git.jani.nikula@intel.com

drm/i915: Use intel_hdmi_port_clock() more

Replace the hand rolled intel_hdmi_port_clock() stuff
with the real thing.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210204020846.2094-2-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>

drm/i915: Index min_{cdclk,voltage_level}[] with pipe

min_cdclk[] and min_voltage_level[] are supposed to be indexed
with the pipe. Fix up a few cases where we index via the crtc
index (via the atomic iterators) instead.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210204020846.2094-1-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>

drm/i915: migrate hsw fdi code to new file.

Daniel asked for this, but it's a bit messy and I'm not sure
how best to clean it up yet.

Signed-off-by: Dave Airlie <airlied@redhat.com>
[Jani: also moved fdi buf trans to intel_fdi.c.]
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/44491f2465549ea5c2e48cde5437fa232f77ab96.1612467466.git.jani.nikula@intel.com

drm/i915: refactor ddi translations into a separate file (v2)

Ville suggested this, these tables are probably better being
standalone.

This fixes up the cnl/bxt interfaces to be like the others,
the intel one I left alone since it has a few extra entrypoints.

v2: add back missing rocketlake bits.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
[Jani: made some functions static]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/def9eed2581d71863ccdf35f323b525facc2482c.1612467466.git.jani.nikula@intel.com

drm/i915: Make psr_safest_params and enable_psr2_sel_fetch parameters read only

By mistake those 2 parameters were defined as read and write in the
.h file while in the .c file it is read only.
The intention here was to be read only to avoid the need of additional
handling.

Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Petri Latvala <petri.latvala@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210204153357.39681-1-jose.souza@intel.com

drm/i915/display: Remove PSR2 on JSL and EHL

While JSL and EHL eDP transcoder supports PSR2, the phy of this
platforms only supports eDP 1.3, so removing PSR2 support as this
feature was added in eDP 1.4.

Signed-off-by: Edmund Dea <edmund.j.dea@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210204175830.97857-1-jose.souza@intel.com

drm/i915/display: Support Multiple Transcoders' PSR status on debugfs

In order to support the PSR state of each transcoder, it adds
i915_psr_status to sub-directory of each transcoder.

v2: Change using of Symbolic permissions 'S_IRUGO' to using of octal
    permissions '0444'
v5: Addressed JJani Nikula's review comments
 - Remove checking of Gen12 for i915_psr_status.
 - Add check of HAS_PSR()
 - Remove meaningless check routine.

Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210204134015.419036-2-gwan-gyeong.mun@intel.com

drm/i915/display: Support PSR Multiple Instances

It is a preliminary work for supporting multiple EDP PSR and
DP PanelReplay. And it refactors singleton PSR to Multi Transcoder
supportable PSR.
And this moves and renames the i915_psr structure of drm_i915_private's to
intel_dp's intel_psr structure.
It also causes changes in PSR interrupt handling routine for supporting
multiple transcoders. But it does not change the scenario and timing of
enabling and disabling PSR. And it not support multiple pipes with
a single transcoder PSR case yet.

v2: Fix indentation and add comments
v3: Remove Blank line
v4: Rebased
v5: Rebased and Addressed Anshuman's review comment.
    - Move calling of intel_psr_init() to intel_dp_init_connector()
v6: Address Anshuman's review comments
   - Remove wrong comments and add comments for a limit of supporting of
     a single pipe PSR
v7: Update intel_psr_compute_config() for supporting multiple transcoder
    PSR on BDW+
v8: Address Anshuman's review comments
   - Replace DRM_DEBUG_KMS with drm_dbg_kms() / DRM_WARN with drm_warn()
v9: Fix commit message
v10: Rebased
v11: Address Jose's review comment.
  - Reorder calling order of intel_psr2_program_trans_man_trk_ctl().
  - In order to reduce changes keep the old name for drm_i915_private.
  - Change restrictions of multiple instances of PSR.
v12: Address Jose's review comment.
  - Change the calling of intel_psr2_program_trans_man_trk_ctl() into
    commit_pipe_config().
  - Change a checking order of CAN_PSR() and connector_status to original
    on i915_psr_sink_status_show().
  - Drop unneeded intel_dp_update_pipe() function.
  - In order to wait a specific encoder which belong to crtc_state on
    intel_psr_wait_for_idle(), add checking of encoder.
  - Add an whitespace to comments.
v13: Rebased and Address Jose's review comment.
  - Add and use for_each_intel_psr_enabled_encoder() macro.
  - In order to use correct frontbuffer_bit for each pipe,
    fix intel_psr_invalidate() and intel_psr_flush().
  - Remove redundant or unneeded codes.
  - Update comments.
v14: Address Jose's review comment
  - Add and use for_each_intel_encoder_can_psr() macro and
    for_each_intel_encoder_mask_can_psr() macro.
  - Add source_support member variable into intel_psr structure.
  - Update CAN_PSR() macro that checks source_support.
  - Move encoder's PSR availity check to psr_init() from
    psr_compute_config().
  - Remove redundant or unneeded codes.
v15: Remove wrong mutex lock/unlock of PSR from
     intel_psr2_program_trans_man_trk_ctl()

Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210204134015.419036-1-gwan-gyeong.mun@intel.com

drm/i915/display: support ddr5 mem types

Add DDR5 and LPDDR5 return values from punit fw.

BSPEC: 54023
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210204200458.21875-1-clinton.a.taylor@intel.com

drm/i915: Reject 446-480MHz HDMI clock on GLK

The BXT/GLK DPLL can't generate certain frequencies. We already
reject the 233-240MHz range on both. But on GLK the DPLL max
frequency was bumped from 300MHz to 594MHz, so now we get to
also worry about the 446-480MHz range (double the original
problem range). Reject any frequency within the higher
problematic range as well.

Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3000
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210203093044.30532-1-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>

drm/i915: Disable runtime power management during shutdown

At least on some TGL platforms PUNIT wants to access some display HW
registers, but it doesn't handle display power management (disabling DC
states as required) and so this register access will lead to a hang. To
prevent this disable runtime power management for poweroff and reboot.

v2:
- Add code comment clarifying the requirement of display power states.
  (Ville)

Reported-and-tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210127181909.128094-1-imre.deak@intel.com

drm/i915/display: fix spelling mistake "Couldnt" -> "Couldn't"

There is a spelling mistake in a drm_dbg message. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210203110803.17894-1-colin.king@canonical.com

Merge tag 'topic/drm-device-pdev-2021-02-02' of git://anongit.freedesktop.org/drm/drm-intel into drm-intel-next

Driver Changes:
- drm/i915: Remove references to struct drm_device.pdev

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87y2g6fxxv.fsf@intel.com

drm/i915/gvt: Remove references to struct drm_device.pdev

Using struct drm_device.pdev is deprecated. Convert i915 to struct
drm_device.dev. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128133127.2311-4-tzimmermann@suse.de

drm/i915/gt: Remove references to struct drm_device.pdev

Using struct drm_device.pdev is deprecated. Convert i915 to struct
drm_device.dev. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128133127.2311-3-tzimmermann@suse.de

drm/i915: Remove references to struct drm_device.pdev

Using struct drm_device.pdev is deprecated. Convert i915 to struct
drm_device.dev. No functional changes.

v6:
* also remove assignment in selftests/ in a later patch (Chris)
v5:
* remove assignment in later patch (Chris)
v3:
* rebased
v2:
* move gt/ and gvt/ changes into separate patches

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128133127.2311-2-tzimmermann@suse.de

Merge tag 'topic/adl-s-enabling-2021-02-01-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-intel-next

Driver Changes:
  - Add basic support for Alder Lake S, to be shared between
  drm-intel-next and drm-intel-gt-next

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
# Conflicts:
# drivers/gpu/drm/i915/i915_drv.h
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210202025620.2212559-1-lucas.demarchi@intel.com

drm/i915/adl_s: Add GT and CTX WAs for ADL-S

- Extend Wa_1606931601 and Wa_1409804808 to ADL-S.
- Extend Wa_14010919138 and Wa_14010229206 to ADL-S (Madhumitha)
- Extend Wa_22010271021 to ADLS (cyokoyam)

v2:
- Extend Wa_1409804808 and remove unnecessary branching/redundant
  adls workaround placeholder functions.
- Split WAs properly based on previous platforms and applicable ADLS
  WA.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Madhumitha Tolakanahalli Pradeep <madhumitha.tolakanahalli.pradeep@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129182945.217078-9-aditya.swarup@intel.com

drm/i915/adl_s: Add display WAs for ADL-S

- Extend permanent driver WA Wa_1409767108, Wa_14010685332
  and Wa_14011294188 to adl-s.
- Extend permanent driver WA Wa_1606054188 to adl-s.
- Add Wa_14011765242 for adl-s A0 stepping.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129182945.217078-8-aditya.swarup@intel.com

drm/i915/adl_s: Update memory bandwidth parameters

Just like RKL, the ADL_S platform also has different memory
characteristics from past platforms.  Update the values used
by our memory bandwidth calculations accordingly.

v2: Fix minor nitpick for shifting ADLS case above RKL(based on platform
order).(mdroper)

Bspec: 64631
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129182945.217078-7-aditya.swarup@intel.com

drm/i915/adl_s: Load DMC

Load DMC on ADL_S v2.01. This is the first offcial
release of DMC for ADL_S.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129182945.217078-6-aditya.swarup@intel.com

drm/i915/display: Add HAS_D12_PLANE_MINIMIZATION

- As RKL and ADL-S only have 5 planes, primary and 4 sprites and
  the cursor plane, let's group the handling together under
  HAS_D12_PLANE_MINIMIZATION.
- Also use macro to select pipe irq fault error mask.

BSpec: 49251
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129182945.217078-5-aditya.swarup@intel.com

drm/i915/adl_s: Re-use TGL GuC/HuC firmware

ADL-S, like RKL, uses the same internal device ID for the GuC and HuC as
TGL did, making them all firmware-compatible.  Let's re-use TGL's
firmware for ADL-S.

Bspec: 50668
Cc: John Harrison <John.C.Harrison@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129182945.217078-4-aditya.swarup@intel.com

drm/i915/adl_s: Add power wells

TGL power wells can be re-used for ADL-S with the exception of the fake
power well for TC_COLD, just like DG-1.

BSpec: 53597
Bspec: 49231

Cc: Imre Deak <imre.deak@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129182945.217078-3-aditya.swarup@intel.com

drm/i915/adl_s: Update PHY_MISC programming

ADL-S switches up which PHYs are considered a master to other PHYs;
PHY-C is no longer a master, but PHY-D is now.

Bspec: 49291
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129182945.217078-2-aditya.swarup@intel.com

drm/i915/bios: tidy up child device debug logging

Make the child device details easier to read by turning this:

[drm:parse_ddi_port [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
[drm:parse_ddi_port [i915]] VBT HDMI level shift for port B: 8
[drm:parse_ddi_port [i915]] VBT DP max link rate for port B: 810000
[drm:parse_ddi_port [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
[drm:parse_ddi_port [i915]] VBT HDMI level shift for port C: 8
[drm:parse_ddi_port [i915]] VBT (e)DP boost level for port C: 3
[drm:parse_ddi_port [i915]] VBT HDMI boost level for port C: 1
[drm:parse_ddi_port [i915]] VBT DP max link rate for port C: 810000

into this:

[drm:parse_ddi_port [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
[drm:parse_ddi_port [i915]] Port B VBT HDMI level shift: 8
[drm:parse_ddi_port [i915]] Port B VBT DP max link rate: 810000
[drm:parse_ddi_port [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
[drm:parse_ddi_port [i915]] Port C VBT HDMI level shift: 8
[drm:parse_ddi_port [i915]] Port C VBT (e)DP boost level: 3
[drm:parse_ddi_port [i915]] Port C VBT HDMI boost level: 1
[drm:parse_ddi_port [i915]] Port C VBT DP max link rate: 810000

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210127084534.24406-1-jani.nikula@intel.com

drm/i915/hdcp: disable the QSES check for HDCP2.2 over MST

Like the patch to disable QSES for HDCP 1.4 over MST
https://patchwork.freedesktop.org/patch/415297/ the HDCP2.2 spec
doesn't require QSES as well and we've seen QSES not supported on a
couple HDCP2.2 docks so far (Dell WD19 and Lenovo LDC-G2)

Remove it for now until we get a better idea of how widely supported
QSES is and how to support it optionally.

Signed-off-by: Juston Li <juston.li@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210127065034.2501119-4-juston.li@intel.com

drm/i915: Don't check tc_mode unless dealing with a TC PHY

We shouldn't really trust tc_mode on non-TC PHYs since we never
initialize it explicitly. So let's check for the PHY type first.
Fortunately TC_PORT_TBT_ALT happens to be zero so I don't think
there's an actual bug here, just a possibility for a future one
if someone rearranges the enum values.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128155948.13678-5-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>

drm/i915: Move HDMI vswing programming to the right place

The documented programming sequence indicates the correct point
for the vswing programming is just before we enable the DDI.
Make it so.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128155948.13678-4-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>

drm/i915: Power up combo PHY lanes for for HDMI as well

Currently we only explicitly power up the combo PHY lanes
for DP. The spec says we should do it for HDMI as well.

Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128155948.13678-3-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>

drm/i915: Extract intel_ddi_power_up_lanes()

Reduce the copypasta by pulling the combo PHY lane
power up stuff into a helper. We'll have a third user soon.

Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128155948.13678-2-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>

drm/i915: Skip vswing programming for TBT

In thunderbolt mode the PHY is owned by the thunderbolt controller.
We are not supposed to touch it. So skip the vswing programming
as well (we already skipped the other steps not applicable to TBT).

Touching this stuff could supposedly interfere with the PHY
programming done by the thunderbolt controller.

Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128155948.13678-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>

drm/i915/dp: Prevent setting the LTTPR LT mode if no LTTPRs are detected

Atm, the driver programs explicitly the default transparent link
training mode (0x55) to DP_PHY_REPEATER_MODE even if no LTTPRs are
detected.

This conforms to the spec (3.6.6.1):
"DP upstream devices that do not enable the Non-transparent mode of
 LTTPRs shall program the PHY_REPEATER_MODE register (DPCD Address
 F0003h) to 55h (default) prior to link training"

however writing the default value to this DPCD register seems to cause
occasional link training errors at least for a DELL WD19TB TBT dock, when
no LTTPRs are detected.

Writing to DP_PHY_REPEATER_MODE will also cause an unnecessary timeout
on systems without any LTTPR.

To fix the above two issues let's assume that setting the default mode
is redundant when no LTTPRs are detected. Keep the existing behavior and
program the default mode if more than 8 LTTPRs are detected or in case
the read from DP_PHY_REPEATER_CNT returns an invalid value.

References: https://gitlab.freedesktop.org/drm/intel/-/issues/2801
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210118183143.1145707-1-imre.deak@intel.com

drm/i915: Implement async flips for vlv/chv

Add support for async flips on vlv/chv. Unlike all the other
platforms vlv/chv do not use the async flip bit in DSPCNTR and
instead we select between async vs. sync flips based on the
surface address register. The normal DSPSURF generates sync
flips DSPADDR_VLV generates async flips. And as usual the
interrupt bits are different from the other platforms.

Cc: Karthik B S <karthik.b.s@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-12-ville.syrjala@linux.intel.com
Reviewed-by: Karthik B S <karthik.b.s@intel.com>

drm/i915: Implement async flip for ilk/snb

Add support for async flips on ivb/hsw. Again no need for any
workarounds and just have to deal with the interrupt bits being
shuffled around a bit.

Cc: Karthik B S <karthik.b.s@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-11-ville.syrjala@linux.intel.com
Reviewed-by: Karthik B S <karthik.b.s@intel.com>

drm/i915: Implement async flip for ivb/hsw

Add support for async flips on ivb/hsw. Unlike bdw+ we don't need
any workarounds to disable async flips. Apart from that the only
real difference from the bdw implementation is the location of the
flip_done interrupt bits.

Cc: Karthik B S <karthik.b.s@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-10-ville.syrjala@linux.intel.com
Reviewed-by: Karthik B S <karthik.b.s@intel.com>

drm/i915: Implement async flips for bdw

Implement async flip support for BDW. The implementation is
similar to the skl+ code. And just like skl/bxt/glk bdw also
needs the disable w/a, thus we need to plumb the desired state
of the async flip all the way down to i9xx_plane_ctl_crtc().

According to the spec we do need to bump the surface alignment
to 256KiB for this. Async flips require an X-tiled buffer so
we don't have to worry about linear.

Cc: Karthik B S <karthik.b.s@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-9-ville.syrjala@linux.intel.com
Reviewed-by: Karthik B S <karthik.b.s@intel.com>

drm/i915: Limit plane stride to below TILEOFF.x limit

Limit pre-skl plane stride to below 4k or 8k pixels (depending on
the platform). We do this in order guarantee that TILEOFF/OFFSET.x
does not get too big.

Currently this is not a problem as we align SURF to 4k, and so
TILEOFF/OFFSET only have to deal with a single tile's worth of
pixels. But for async flips we're going to have to bump SURF
alignment to 256k, and thus we can no longer guarantee
TILEOFF/OFFSET.x will stay within acceptable bounds. We can avoid
this by borrowing a trick from the skl+ code and limit the max
plane stride to whatever value we can fit into TILEOFF/OFFSET.x.

The slight downside is that we may end up doing GTT remapping in
a few more cases where previously we did not have to. But since
that will only happen with huge buffers I'm not really concerned
about it.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-3-ville.syrjala@linux.intel.com
Reviewed-by: Karthik B S <karthik.b.s@intel.com>

drm/i915: Rename is_16gb_dimm to wm_lv_0_adjust_needed

As it now it is always required for GEN12+ the is_16gb_dimm name
do not make sense for GEN12+.

v2:
- Updated comment on top of "dram_info->wm_lv_0_adjust_needed =
!IS_GEN9_LP(i915);"

Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128164312.91160-3-jose.souza@intel.com

drm/i915/gen11+: Only load DRAM information from pcode

Up to now we were reading some DRAM information from MCHBAR register
and from pcode what is already not good but some GEN12(TGL-H and ADL-S)
platforms have MCHBAR DRAM information in different offsets.

This was notified to HW team that decided that the best alternative is
always apply the 16gb_dimm watermark adjustment for GEN12+ platforms
and read the remaning DRAM information needed to other display
programming from pcode.

So here moving the DRAM pcode function to intel_dram.c, removing
the duplicated fields from intel_qgv_info, setting and using
information from dram_info.

v2:
- bring back num_points to intel_qgv_info as num_qgv_point can be
overwritten in icl_get_qgv_points()
- add gen12_get_dram_info() and simplify gen11_get_dram_info()

Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128164312.91160-2-jose.souza@intel.com

drm/i915: Nuke not needed members of dram_info

Valid, ranks and bandwidth_kbps are set into dram_info but are not
used anywhere else so nuking it.

Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128164312.91160-1-jose.souza@intel.com

drm/i915: Fix the MST PBN divider calculation

Atm the driver will calculate a wrong MST timeslots/MTP (aka time unit)
value for MST streams if the link parameters (link rate or lane count)
are limited in a way independent of the sink capabilities (reported by
DPCD).

One example of such a limitation is when a MUX between the sink and
source connects only a limited number of lanes to the display and
connects the rest of the lanes to other peripherals (USB).

Another issue is that atm MST core calculates the divider based on the
backwards compatible DPCD (at address 0x0000) vs. the extended
capability info (at address 0x2200). This can result in leaving some
part of the MST BW unused (For instance in case of the WD19TB dock).

Fix the above two issues by calculating the PBN divider value based on
the rate and lane count link parameters that the driver uses for all
other computation.

Bugzilla: https://gitlab.freedesktop.org/drm/intel/-/issues/2977
Cc: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjala <ville.syrjala@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjala <ville.syrjala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210125173636.1733812-2-imre.deak@intel.com

drm/dp/mst: Export drm_dp_get_vc_payload_bw()

This function will be needed by the next patch where the driver
calculates the BW based on driver specific parameters, so export it.

At the same time sanitize the function params, passing the more natural
link rate instead of the encoding of the same rate.

v2:
- Fix function documentation. (Lyude)

Cc: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjala <ville.syrjala@intel.com>
Cc: <stable@vger.kernel.org>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210125173636.1733812-1-imre.deak@intel.com

drm/i915/hdcp: Disable the QSES check for HDCP 1.4 over MST

The HDCP 1.4 spec does not require the QUERY_STREAM_ENCRYPTION_STATUS
check, it was always a nice-to-have. After deploying this across various
devices, we've determined that some MST bridge chips do not properly
support this call for HDCP 1.4 (namely Synaptics and Realtek).

I had considered creating a quirk for this, but I think it's more
prudent to just disable the check entirely since I don't have an idea
how widespread support is.

Changes in v2:
-Rebased on -tip

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210106223909.34476-1-sean@poorly.run
Link: https://patchwork.freedesktop.org/patch/msgid/20210121172620.33066-1-sean@poorly.run

drm/i915/display: Prevent double YUV range correction on HDR planes

Prevent the ICL HDR plane pipeline from performing YUV color range
correction twice when the input is in limited range. This is done by
removing the limited-range code from icl_program_input_csc().

Before this patch the following could happen: user space gives us a YUV
buffer in limited range; per the pipeline in [1], the plane would first
go through a "YUV Range correct" stage that expands the range; the plane
would then go through the "Input CSC" stage which would also expand the
range because icl_program_input_csc() would use a matrix and an offset
that assume limited-range input; this would ultimately cause dark and
light colors to appear darker and lighter than they should respectively.

This is an issue because if a buffer switches between being scanned out
and being composited with the GPU, the user will see a color difference.
If this switching happens quickly and frequently, the user will perceive
this as a flickering.

[1] https://01.org/sites/default/files/documentation/intel-gfx-prm-osrc-icllp-vol12-displayengine_0.pdf#page=281

Cc: stable@vger.kernel.org
Signed-off-by: Andres Calderon Jaramillo <andrescj@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215224219.3896256-1-andrescj@google.com

drm/i915: WARN if plane src coords are too big

Inform us if we're buggy and are about to exceed the size of the
bitfields in the plane TILEOFF/OFFSET registers.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-2-ville.syrjala@linux.intel.com
Reviewed-by: Karthik B S <karthik.b.s@intel.com>

drm/i915/display/vrr: Skip the VRR HW state readout on DSI transcoder

DSI transcoder does not support VRR and hence skip the HW state
readout if its a DSI transcoder.

Fixes: c7f0f4372b30 ("drm/i915/display: Add HW state readout for VRR")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210126185224.32340-1-manasi.d.navare@intel.com

drm/i915/adl_s: Update combo PHY master/slave relationships

ADL-S switches up which PHYs are considered a master to other PHYs;
PHY-C is no longer a master, but PHY-D is now.

Bspec: 49291
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210125140753.347998-11-aditya.swarup@intel.com

drm/i915/adl_s: Add vbt port and aux channel settings for adls

- ADL-S driver internal mapping uses PORT D, E, F, G for Combo phy B, C,
  D and E.
- Add ADLS specific port mappings for vbt port dvo settings.
- Select appropriate AUX CH specific to ADLS based on port mapping.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210125140753.347998-10-aditya.swarup@intel.com

drm/i915/adl_s: Add adl-s ddc pin mapping

ADL-S requires TC pins to set up ddc for Combo PHY B, C, D and E.
Combo PHY A still uses the old ddc pin mapping.

From VBT, ddc pin info suggests the following mapping:
VBT                 DRIVER
DDI B->ddc_pin=2 should translate to PORT_D->0x9
DDI C->ddc_pin=3 should translate to PORT_E->0xa
DDI D->ddc_pin=4 should translate to PORT_F->0xb
DDI E->ddc_pin=5 should translate to PORT_G->0xc

Adding pin map to facilitate this translation as we cannot use existing
icl ddc pin map due to conflict with DDI B and DDI C info.

Bspec:20124

v2: Replace IS_ALDERLAKE_S() with HAS_PCH_ADP() as the pin map pairing
depends on the PCH being used rather than the platform.(mdroper)

v3:
- Modify adls_port_to_ddc_pin() to make PHY_A the special case for
  check, else return pin mapping based on correct arithmetic with phy
  offset. Remove redundant platform checks and use HAS_PCH_ADP() instead
  of IS_ALDERLAKE_S() in intel_hdmi_ddc_pin().(mdroper)

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210125140753.347998-9-aditya.swarup@intel.com

drm/i915/adl_s: Initialize display for ADL-S

Initialize display outputs for ADL-S. ADL-S has 5 display
outputs -> 1 eDP, 2 HDMI and 2 DP++ outputs.

v2:
- Use PORT_TCx instead of PORT_D,E.. to stay consistent
  with other platforms.(mdroper)

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210125140753.347998-8-aditya.swarup@intel.com

drm/i915/adl_s: Configure Port clock registers for ADL-S

Add changes to configure port clock registers for ADL-S. Combo phy port
clocks are configured by DPCLKA_CFGCR0 and DPCLKA_CFGCR1 registers.

The DDI to internal clock mappings in DPCLKA_CFGCR0 register for ADL-S
translates to
DDI A -> DDIA
DDI B -> USBC1
DDI I -> USBC2

For DPCLKA_CFGCR1
DDI J -> USBC3
DDI K -> USBC4

Bspec: 50287
Bspec: 53812
Bspec: 53723

v2: Replace I915_READ() with intel_de_read().(Jani)

v3:
- Use reg variable to assign ADLS specific registers inorder to replace
  branching with intel_de_read/write() calls.(mdroper)
- Reuse icl_get_ddi_pll() for ADLS to fix issue with updating active
  dpll on driver load.(aswarup)

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210125140753.347998-7-aditya.swarup@intel.com

drm/i915/adl_s: Configure DPLL for ADL-S

Add changes for configuring DPLL for ADL-S
- Reusing DG1 DPLL 2 & DPLL 3 for ADL-S
- Extend CNL macro to choose DPLL_ENABLE
  for ADL-S.
- Select CFGCR0 and CFGCR1 for ADL-S plls.

On BSpec: 53720 PLL arrangement dig for adls:
DPLL2 cfgcr is programmed using _ADLS_DPLL3_CFGCR(0/1)
DPLL3 cfgcr is programmed using _ADLS_DPLL4_CFGCR(0/1)

v2 (Lucas): add missing update_ref_clks

Bspec: 50288
Bspec: 50289
Bspec: 49443

v3 : Adding another bit to HDPORT_DPLL_USED_MASK bitfield
for DPLL3_USED.(mdroper)

Bspec: 53707

v4:  BSpec 53723 has been updated with note - DPLL2 is
controlled by DPLL4 CFGCR 0/1.(mdroper)

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210125140753.347998-6-aditya.swarup@intel.com

drm/i915/adl_s: Add PHYs for Alderlake S

Alderlake-S has 5 combo phys, add reg definitions for
combo phys and update the port to phy helper for ADL-S.

v2:
- Change IS_GEN() >= 12 to IS_TIGERLAKE() in intel_phy_is_tc()
and return false for platforms RKL,DG1 and ADLS.(mdroper)

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210125140753.347998-5-aditya.swarup@intel.com

drm/i915/adl_s: Add Interrupt Support

ADLS follows ICP/TGP like interrupts.

v2: Use "INTEL_PCH_TYPE(dev_priv) >= PCH_ICP" of hpd_icp (Lucas)

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210125140753.347998-4-aditya.swarup@intel.com

drm/i915/adl_s: Add PCH support

Add support for Alderpoint(ADP) PCH used with Alderlake-S.

v2:
- Use drm_dbg_kms and drm_WARN_ON based on Jani's feedback.(aswarup)

Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Caz Yokoyama <caz.yokoyama@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210125140753.347998-3-aditya.swarup@intel.com

x86/gpu: Add Alderlake-S stolen memory support

Alderlake-S is a Gen 12 based hybrid processor architecture. As it
belongs to Gen 12 family, it uses the same GTT stolen memory settings
like its predecessors - ICL(Gen 11) and TGL(Gen 12). Inherit gen11
and gen 9 quirks for determining base and size of stolen memory.

Bspec: 52055
Bspec: 49589
Bspec: 49636

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: x86@kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Caz Yokoyama <caz.yokoyama@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210126001744.29442-2-aditya.swarup@intel.com

drm/i915: Do a bit more initial readout for dbuf

Readout the dbuf related stuff during driver init/resume and
stick it into our dbuf state.

v2: Keep crtc_state->wm.skl.ddb

Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122205633.18492-9-ville.syrjala@linux.intel.com

drm/i915: Encapsulate dbuf state handling harder

In order to make the dbuf state computation less fragile
let's make it stand on its own feet by not requiring someone
to peek into a crystall ball ahead of time to figure out
which pipes need to be added to the state under which potential
future conditions. Instead we compute each piece of the state
as we go along, and if any fallout occurs that affects more than
the current set of pipes we add the affected pipes to the state
naturally.

That requires that we track a few extra thigns in the global
dbuf state: dbuf slices for each pipe, and the weight each
pipe has when distributing the same set of slice(s) between
multiple pipes. Easy enough.

We do need to follow a somewhat careful sequence of computations
though as there are several steps involved in cooking up the dbuf
state. Thoguh we could avoid some of that by computing more things
on demand instead of relying on earlier step of the algorithm to
have filled it out. I think the end result is still reasonable
as the entire sequence is pretty much consolidated into a single
function instead of being spread around all over.

The rough sequence is this:
1. calculate active_pipes
2. calculate dbuf slices for every pipe
3. calculate total enabled slices
4. calculate new dbuf weights for any crtc in the state
5. calculate new ddb entry for every pipe based on the sets of
   slices and weights, and add any affected crtc to the state
6. calculate new plane ddb entries for all crtcs in the state,
   and add any affected plane to the state so that we'll perform
   the requisite hw reprogramming

And as a nice bonus we get to throw dev_priv->wm.distrust_bios_wm
out the window.

v2: Keep crtc_state->wm.skl.ddb

Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122205633.18492-8-ville.syrjala@linux.intel.com

drm/i915: Extract intel_crtc_dbuf_weights()

Extract the code to calculate the weights used to chunk up the dbuf
between pipes. There's still extra stuff in there that shouldn't be
there and must be moved out, but that requires a bit more state to
be tracked in the dbuf state.

v2: Keep crtc_state->wm.skl.ddb

Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122205633.18492-7-ville.syrjala@linux.intel.com

drm/i915: Add pipe ddb entries into the dbuf state

The dbuf state will be where we collect all the inter-pipe dbuf
allocation stuff. Start by adding the actual per-pipe ddb entries
there.

Originally the plan was to move them there outright, but that no longer
works as we're no longer guaranteed to have a dbuf state when it comes
time to sanity check the ddb overlaps in skl_commit_modeset_enables().
I think when I wrote this originally we did the watermark/ddb
calculation last, and so we couldn't have any crtcs in the state w/o
also having the dbuf state. But that has since changed and we do the
watermark/ddb calculation much earlier, and thus it is now possible
to commit crtcs w/o a dbuf state. So we keep another copy of the
information in the crtc state.

v2: Rebase
v3: Duplicate the entries instead of moving

Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122205633.18492-6-ville.syrjala@linux.intel.com

drm/i915: Introduce skl_ddb_entry_for_slices()

Generalize icl_get_first_dbuf_slice_offset() into something that
just gives us the start+end of the dbuf chunk covered by the
specified slices as a standard ddb entry. Initial idea was to use
it during readout as well, but we shall see.

Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122205633.18492-5-ville.syrjala@linux.intel.com

drm/i915: Introduce intel_dbuf_slice_size()

Put the code into a function with a descriptive name. Also relocate
the code a bit help future work.

Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122205633.18492-4-ville.syrjala@linux.intel.com

drm/i915: Pass the crtc to skl_compute_dbuf_slices()

skl_compute_dbuf_slices() has no use for the crtc state, so
just pass the crtc itself.

Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122205633.18492-3-ville.syrjala@linux.intel.com

drm/i915: Extract intel_crtc_ddb_weight()

skl_ddb_get_pipe_allocation_limits() doesn't care how the weights
for distributing the ddb are caclculated for each pipe. Put that
calculation into a separate function so that such mundane details
are hidden from view.

v2: s/adjusted_mode/pipe_mode/

Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122205633.18492-2-ville.syrjala@linux.intel.com

drm/i915: Fix vblank evasion with vrr

With vrr enabled the hardware no longer latches the registers
automagically at vblank start. The point at which it will do the
latching even when no push has been sent is the vmax decision
boundary. That is the thing we need to evade to avoid our
register latching to get split between two frames.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122232647.22688-18-manasi.d.navare@intel.com

drm/i915: Fix vblank timestamps with VRR

To get sensible vblank timestamping behaviour we need to feed
the vmax based timings to the vblank code, otherwise it'll chop
off the scanline counter when it exceeds the minumum vtotal.

Additionally with VRR we have three cases to consider when we
generate the vblank timestamp:
1) we are in vertical active
  -> nothing special needs to be done, just return the current
     scanout position and the core will calculate the timestamp
     corresponding to the past time when the current vertical
     active started
2) we are in vertical blank and no push has been sent
  -> the hardware will keep extending the vblank presumably
     to its maximum length, so we make the timestmap match the
     expected time when the max length vblank will end. Since
     the timings used for this are now based on vmax nothing
     special actually needs to be done
3) we are in vblank and a push has been sent so the vblank is
   about to terminate
  -> presumably we want the timestmap to accurately reflect
     when the vblank will terminate, so we use the sampled
     frame timestamp vs. current timestamp to guesstimate
     how far along the vblank exit we are, and then we
     adjust the reported scanout position accordingly so
     that the core will see that the vblank is close to
     ending.

v2:
* Fix the else if (use_scanline_Counter) (Manasi)

Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122232647.22688-17-manasi.d.navare@intel.com

drm/i915: Add vrr state dump

Dump vrr state alongside everything else.

Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122232647.22688-16-manasi.d.navare@intel.com

drm/i915/display: Helpers for VRR vblank min and max start

With VRR the earliest the registers can get latched are at
flipline decision boundary, calculate that as vrr_vmin_vblank_start()
and the latest the regsiters can get latched are vmax decision boundary
calculate that as vrr_vmax_vblank_start()

v2:
* Remove TODO and adjust extra scanline const (Manasi)

Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122232647.22688-15-manasi.d.navare@intel.com

drm/i915/display: Add HW state readout for VRR

This functions gets the VRR config from the VRR registers
to match the crtc state variables for VRR.

v2:
* Rebase (Manasi)
* Use HAS_VRR (Jani N)

v3:
* Get pipeline_full, flipline (Ville)

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122232647.22688-14-manasi.d.navare@intel.com

drm/i915/display/vrr: Set IGNORE_MSA_PAR state in DP Sink

If VRR is enabled, the sink should ignore MSA parameters
and regenerate incoming video stream without depending
on these parameters. Hence set the MSA_TIMING_PAR_IGNORE_EN
bit if VRR is enabled.
Reset this bit on VRR disable.

v2:
* ACtually set the dpcd msa ignore bit (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122232647.22688-13-manasi.d.navare@intel.com

drm/i915/display/vrr: Disable VRR in modeset disable path

This patch disables the VRR enable and VRR PUSH
bits in the HW during commit modeset disable sequence.

Thsi disable will happen when the port is disabled
or when the userspace sets VRR prop to false and
requests to disable VRR.

v2:
* Use intel_de_rmw (Jani N)

v3:
* Remove rmw (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122232647.22688-12-manasi.d.navare@intel.com

drm/i915/display/vrr: Send VRR push to flip the frame

VRR achieves vblank stretching using the HW PUSH functionality.
So once the VRR is enabled during modeset then for each flip
request from userspace, in the atomic tail pipe_update_end()
we need to set the VRR push bit in HW for it to terminate
the vblank at configured flipline or anytime after flipline
or latest at the Vmax.

The HW clears the PUSH bit after the double buffer updates
are completed.

v2:
* Move send push to after irq en (Manasi)
* Call send push unconditionally (Jani N)

v3:
* Stall w.r.t Vrr vmax (Manasi, Gary Smith)

v4:
* Remove the rmw (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Gary Smith <gary.k.smith@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122232647.22688-11-manasi.d.navare@intel.com