OSDN Git Service
Isaku Yamahata [Fri, 24 Dec 2010 03:14:14 +0000 (12:14 +0900)]
pcie/aer: glue aer error injection into qemu monitor
introduce pcie_aer_inject_error command.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Isaku Yamahata [Fri, 24 Dec 2010 03:14:13 +0000 (12:14 +0900)]
pci: introduce a helper function to convert qdev id to PCIDevice
This patch introduce a helper function to get PCIDevice from qdev id.
This function will be used later.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Isaku Yamahata [Fri, 24 Dec 2010 03:14:12 +0000 (12:14 +0900)]
qdev: export qdev_find_recursive() for later use
This patch exports qdev_find_recursive() for later use.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Isaku Yamahata [Wed, 22 Dec 2010 10:54:48 +0000 (19:54 +0900)]
build, pci: remove QMP dependency on core PCI code
by introducing pci-stub.c, eliminate QMP dependency on core PCI code
rquired by query-pci command.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Isaku Yamahata [Wed, 22 Dec 2010 06:14:35 +0000 (15:14 +0900)]
pcie: add flr support
Support flr: trigger device reset on flr config write.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Isaku Yamahata [Wed, 22 Dec 2010 06:13:43 +0000 (15:13 +0900)]
pc/piix: fix mismerge of
b1aeb92666d2fde413c34578b3b42bbfe5f2a506
The change set of
b1aeb92666d2fde413c34578b3b42bbfe5f2a506 in pci branch
was mismerged. The compatibility should be kept for 0.13, not for 0.14.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Michael S. Tsirkin [Mon, 20 Dec 2010 13:17:10 +0000 (15:17 +0200)]
qdev: remove an unused function
qbus_reset_all is unused, remove it
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Isaku Yamahata [Mon, 20 Dec 2010 05:33:35 +0000 (14:33 +0900)]
qbus: register reset handler for qbus whose parent is NULL
Stefan Weil reported the regression caused by
ec990eb622ad46df5ddcb1e94c418c271894d416 as follows
> The second regression also occurs with MIPS malta.
> Networking no longer works with the default pcnet nic.
>
> This is caused because the reset function for pcnet is no
> longer called during system boot. The result in an invalid
> mac address (all zero) and a non-working nic.
>
> For this second regression I still have no simple solution.
> Of course mips_malta.c should be converted to qdev which
> would fix both problems (but only for malta system emulation).
The issue is, it is assumed that all qbuses, qdeves are under
main_system_bus. But there are qbuses whose parent is NULL. So it
is necessary to trigger reset for those qbuses.
(On the other hand, if NULL is passed to qdev_create(), its parent bus
is main_system_bus.)
Ideally those buses should be moved under bus controller
device which is qdev. But it's not done yet.
So register qbus reset handler for qbus whose parent is NULL.
Reported-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Stefan Weil [Thu, 16 Dec 2010 18:33:22 +0000 (19:33 +0100)]
qdev: sysbus_get_default must not return a NULL pointer (fix regression)
Every system should have some sort of main system bus,
so sysbus_get_default should always return a valid bus.
Without this patch, at least mipssim and malta no longer
start but raise a null pointer access exception (caused by
commit
ec990eb622ad46df5ddcb1e94c418c271894d416).
Cc: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Michael S. Tsirkin [Tue, 14 Dec 2010 12:24:53 +0000 (14:24 +0200)]
pci: don't use bus number in migration, stub out
Using bus numbers in migration is clearly wrong as
they are guest assigned. Not really sure what the
right thing to do is, for now stick 0 in there so things
keep working for non-nested setups, add a TODO.
We also probably have to mark nested bridges as non-migrateable
until this is fixed?
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Blue Swirl [Sun, 19 Dec 2010 10:43:09 +0000 (10:43 +0000)]
ahci: delete write-only variables (v2)
Avoid these warnings with GCC 4.6.0:
/src/qemu/hw/ide/ahci.c: In function 'ahci_reset_port':
/src/qemu/hw/ide/ahci.c:810:14: error: variable 'tfd' set but not used [-Werror=unused-but-set-variable]
/src/qemu/hw/ide/ahci.c: In function 'handle_cmd':
/src/qemu/hw/ide/ahci.c:1103:19: error: variable 'pr' set but not used [-Werror=unused-but-set-variable]
In the tfd variable case, fix the logic also.
CC: Alexander Graf <agraf@suse.de>
CC: Kevin Wolf <kwolf@redhat.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sun, 19 Dec 2010 10:04:04 +0000 (10:04 +0000)]
vga: Declare as little endian
This patch replaces explicit bswaps with endianness hints to the
mmio layer.
CC: Alexander Graf <agraf@suse.de>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Stefan Weil [Sat, 18 Dec 2010 16:34:26 +0000 (17:34 +0100)]
win32: Fix CRLF problem in make_device_config.sh
QEMU source code with CRLF line endings
which is quite common on windows hosts
fails with current make_device_config.sh.
The awk script gets the name of the included
file with \r, so instead of pci.mak it will
search for pci.mak\r which of course does
not work.
Fix this by removing any \r.
v2:
Avoid using sub() and \r with awk because they are unsupported
on some platforms. Use tr to remove \r. This new solution
improves portability and was suggested by Paolo Bonzini.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Acked-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Bob Breuer [Sat, 18 Dec 2010 17:09:04 +0000 (11:09 -0600)]
sparc32: ledma extra registers
ledma has 0x20 bytes of registers according to OBP, and at least Solaris9
reads the 5th register which is beyond what we've mapped. So let's setup
a flag (inspired by a previous patch from Blue Swirl) to identify ledma
from espdma, and map another 16 bytes of registers which return 0.
Signed-off-by: Bob Breuer <breuerr@mc.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Fri, 17 Dec 2010 21:03:00 +0000 (21:03 +0000)]
Fix warning on mingw32
Avoid this warning like other uses of setsockopt:
/src/qemu/net/socket.c: In function 'net_socket_mcast_create':
/src/qemu/net/socket.c:210: warning: passing argument 4 of 'setsockopt' from incompatible pointer type
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Kevin Wolf [Fri, 17 Dec 2010 18:49:18 +0000 (19:49 +0100)]
ide: Build fix for via.c
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Fri, 17 Dec 2010 18:43:41 +0000 (19:43 +0100)]
ide: Fix build for cmd646.c
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Andreas Färber <andreas.faerber@web.de>
Stefan Hajnoczi [Fri, 17 Dec 2010 15:58:20 +0000 (15:58 +0000)]
docs: Fix missing carets in QED specification
For some reason the carets ('^') in the QED specification disappeared.
This patch puts them back.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Jes Sorensen [Fri, 17 Dec 2010 15:02:40 +0000 (16:02 +0100)]
Add proper -errno error return values to qcow2_open()
In addition this adds missing braces to the function to be consistent
with the coding style.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Jes Sorensen [Fri, 17 Dec 2010 15:02:39 +0000 (16:02 +0100)]
block/qcow2.c: rename qcow_ functions to qcow2_
It doesn't really make sense for functions in qcow2.c to be named
qcow_ so convert the names to match correctly.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Mon, 6 Dec 2010 16:08:03 +0000 (16:08 +0000)]
qed: Consistency check support
This patch adds support for the qemu-img check command. It also
introduces a dirty bit in the qed header to mark modified images as
needing a check. This bit is cleared when the image file is closed
cleanly.
If an image file is opened and it has the dirty bit set, a consistency
check will run and try to fix corrupted table offsets. These
corruptions may occur if there is power loss while an allocating write
is performed. Once the image is fixed it opens as normal again.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Mon, 6 Dec 2010 16:08:02 +0000 (16:08 +0000)]
qed: Read/write support
This patch implements the read/write state machine. Operations are
fully asynchronous and multiple operations may be active at any time.
Allocating writes lock tables to ensure metadata updates do not
interfere with each other. If two allocating writes need to update the
same L2 table they will run sequentially. If two allocating writes need
to update different L2 tables they will run in parallel.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Mon, 6 Dec 2010 16:08:01 +0000 (16:08 +0000)]
qed: Table, L2 cache, and cluster functions
This patch adds code to look up data cluster offsets in the image via
the L1/L2 tables. The L2 tables are writethrough cached in memory for
performance (each read/write requires a lookup so it is essential to
cache the tables).
With cluster lookup code in place it is possible to implement
bdrv_is_allocated() to query the number of contiguous
allocated/unallocated clusters.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Mon, 6 Dec 2010 16:08:00 +0000 (16:08 +0000)]
qed: Add QEMU Enhanced Disk image format
This patch introduces the qed on-disk layout and implements image
creation. Later patches add read/write and other functionality.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Mon, 6 Dec 2010 16:07:59 +0000 (16:07 +0000)]
docs: Add QED image format specification
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Fri, 17 Dec 2010 10:55:37 +0000 (11:55 +0100)]
qemu-io: Fix typo in help texts
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Christoph Hellwig [Fri, 17 Dec 2010 10:41:15 +0000 (11:41 +0100)]
raw-posix: add discard support
Add support to discard blocks in a raw image residing on an XFS filesystem
by calling the XFS_IOC_UNRESVSP64 ioctl to punch holes. Support for other
hole punching mechanisms can be added when they become available.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Mon, 13 Dec 2010 09:36:26 +0000 (09:36 +0000)]
qemu-io: Add discard command
discard [-Cq] off len -- discards a number of bytes at a specified
offset
discards a range of bytes from the given offset
Example:
'discard 512 1k' - discards 1 kilobyte from 512 bytes into the file
Discards a segment of the currently open file.
-C, -- report statistics in a machine parsable format
-q, -- quite mode, do not show I/O statistics
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Christoph Hellwig [Thu, 16 Dec 2010 18:36:43 +0000 (19:36 +0100)]
scsi-disk: support WRITE SAME (16) with unmap bit
Support discards via the WRITE SAME command with the unmap bit set, and
tell the initiator about the support for it via the block limit and the
new thin provisioning EVPD pages. Also fix the comment which incorrectly
describedthe block limits EVPD page.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Christoph Hellwig [Thu, 16 Dec 2010 18:36:31 +0000 (19:36 +0100)]
block: add discard support
Add a new bdrv_discard method to free blocks in a mapping image, and a new
drive property to set the granularity for these discard. If no discard
granularity support is set discard support is disabled.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Thu, 16 Dec 2010 15:54:06 +0000 (15:54 +0000)]
ide: Register vm change state handler once only
We register the vm change state handler in a PCI BAR map() function.
This function can be called multiple times throughout the lifetime of a
PCI IDE device. This results in duplicate vm change state handlers
being register, none of which are ever unregistered.
Instead, register the vm change state handler in the device's init
function once and for all.
piix tested, cmd646 and via not tested.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Thu, 16 Dec 2010 14:37:41 +0000 (15:37 +0100)]
Remove NULL checks for bdrv_new return value
It's an indirect call to qemu_malloc, which never returns an error.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Jes Sorensen [Thu, 16 Dec 2010 13:31:53 +0000 (14:31 +0100)]
qemu.img.c: Use error_report() instead of own error() implementation
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Jes Sorensen [Thu, 16 Dec 2010 12:52:18 +0000 (13:52 +0100)]
bdrv_img_create() use proper errno return values
Kevin suggested to have bdrv_img_create() return proper -errno values
on error.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Jes Sorensen [Thu, 16 Dec 2010 12:52:17 +0000 (13:52 +0100)]
Prevent creating an image with the same filename as backing file
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Jes Sorensen [Thu, 16 Dec 2010 12:52:16 +0000 (13:52 +0100)]
Introduce do_snapshot_blkdev() and monitor command to handle it.
The monitor command is:
snapshot_blkdev <device> [snapshot-file] [format]
Default format is qcow2. For now snapshots without a snapshot-file, eg
internal snapshots, are not supported.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Jes Sorensen [Thu, 16 Dec 2010 12:52:15 +0000 (13:52 +0100)]
qemu-img.c: Re-factor img_create()
This patch re-factors img_create() moving the code doing the actual
work into block.c where it can be shared with QEMU. This is needed to
be able to create images from QEMU to be used for live snapshots.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Thu, 16 Dec 2010 14:10:32 +0000 (15:10 +0100)]
qemu-img: Call error_set_progname
Call error_set_progname during the qemu-img initialization, so that error
messages printed with error_report() use the right prefix.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Alexander Graf [Tue, 14 Dec 2010 15:23:38 +0000 (16:23 +0100)]
ide: honor ncq for atapi
ATAPI also can do ncq, so let's expose the capability.
This patch makes CD-ROM support work on Windows 7 for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Sebastian Herbszt [Tue, 14 Dec 2010 00:34:43 +0000 (01:34 +0100)]
ahci: set SATA Mode Select
Set SATA Mode Select to AHCI in the Address Map Register.
Signed-off-by: Sebastian Herbszt <herbszt@gmx.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Alexander Graf [Tue, 14 Dec 2010 00:34:42 +0000 (01:34 +0100)]
config: add ahci for pci capable machines
This patch enables AHCI for all machines supporting PCI.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Alexander Graf [Tue, 14 Dec 2010 00:34:41 +0000 (01:34 +0100)]
config: move ide core and pci to pci.mak
Every device that can do PCI should also be able to do IDE. So let's move
the IDE definitions over to pci.mak.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Alexander Graf [Tue, 14 Dec 2010 00:34:40 +0000 (01:34 +0100)]
ahci: add ahci emulation
This patch adds an emulation layer for an ICH-9 AHCI controller. For now
this controller does not do IDE legacy emulation. It is a pure AHCI controller.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Alexander Graf [Tue, 14 Dec 2010 00:34:39 +0000 (01:34 +0100)]
pci: add ich9 pci id
We need a PCI ID for our new AHCI adapter. I just picked an ICH-9
because that's the one in the Q35 chipset.
This patch adds a PCI ID define for an ICH-9 AHCI adapter.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Alexander Graf [Tue, 14 Dec 2010 00:34:38 +0000 (01:34 +0100)]
pci: add storage class for sata
This patch adds the storage sata class id.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Roland Elek [Tue, 14 Dec 2010 00:34:37 +0000 (01:34 +0100)]
ide: add ncq identify data for ahci sata drives
I modified ide_identify() to include the zero-based queue length
value in word 75, and set bit 8 in word 76 to signal NCQ support
in the identify data for AHCI SATA drives.
Signed-off-by: Roland Elek <elek.roland@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Alexander Graf [Tue, 14 Dec 2010 23:23:01 +0000 (00:23 +0100)]
ide: move transfer_start after variable modification
We hook into transfer_start and immediately call the end function
for ahci. This means that everything needs to be in place for the
end function when we start the transfer, so let's move the function
down to where all state is in place.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Alexander Graf [Tue, 14 Dec 2010 23:23:00 +0000 (00:23 +0100)]
ide: Split out BMDMA code from ATA core
The ATA core is currently heavily intertwined with BMDMA code. Let's loosen
that a bit, so we can happily replace the DMA backend with different
implementations.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Alexander Graf [Tue, 14 Dec 2010 00:34:34 +0000 (01:34 +0100)]
ide: fix whitespace gap in ide_exec_cmd
Now that we have the function split out, we have to reindent it.
In order to increase the readability of the actual functional change,
this is split out.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Alexander Graf [Tue, 14 Dec 2010 00:34:33 +0000 (01:34 +0100)]
ide: split ide command interpretation off
The ATA command interpretation code can be used for PATA and SATA
interfaces alike. So let's split it out into a separate function.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Jes Sorensen [Thu, 9 Dec 2010 13:17:25 +0000 (14:17 +0100)]
qemu-img.c: Clean up handling of image size in img_create()
This cleans up the handling of image size in img_create() by parsing
the value early, and then only setting it once if a value has been
added as the last argument to the command line.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Jes Sorensen [Thu, 9 Dec 2010 13:17:24 +0000 (14:17 +0100)]
Introduce strtosz_suffix()
This introduces strtosz_suffix() which allows the caller to specify a
default suffix in case the non default of MB is wanted.
strtosz() is kept as a wrapper for strtosz_suffix() which keeps it's
current default of MB.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Thu, 2 Dec 2010 16:54:13 +0000 (16:54 +0000)]
block: Fix the use of protocols in backing files
Backing filenames may contain a protocol. The code currently doesn't
consider this case and produces filenames that embed "<protocol>:".
Don't combine filenames if the backing filename contains a protocol.
Based on an earlier patch by Anthony Liguori <aliguori@us.ibm.com>.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Thu, 9 Dec 2010 11:53:00 +0000 (11:53 +0000)]
block: Introduce path_has_protocol() function
The bdrv_find_protocol() function returns NULL if an unknown protocol
name is given. It returns the "file" protocol when the filename
contains no protocol at all. This makes it difficult to distinguish
between paths which contain a protocol and those which do not.
Factor out a helper function that tests whether or not a filename has a
protocol. The next patch makes use of this function.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Ryan Harper [Wed, 8 Dec 2010 16:05:00 +0000 (10:05 -0600)]
blockdev: check dinfo ptr before using
If a user decides to punish a guest by revoking its block device via
drive_del, and subsequently also attempts to remove the pci device
backing it, and the device is using blockdev_auto_del() then we get a
segfault when we attempt to access dinfo->auto_del.[1]
The fix is to check if drive_get_by_blockdev() actually returns a valid
dinfo pointer or not.
1. (qemu) pci_add auto storage file=images/test01.raw,if=virtio,id=block1,snapshot=on
(qemu) drive_del block1
(qemu) pci_del 5
*segfault*
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
Tested-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Anthony Liguori [Fri, 17 Dec 2010 14:25:17 +0000 (08:25 -0600)]
Merge remote branch 'arm/for-anthony' into staging
Anthony Liguori [Fri, 17 Dec 2010 14:23:53 +0000 (08:23 -0600)]
Merge remote branch 'kwolf/for-anthony' into staging
Anthony Liguori [Fri, 17 Dec 2010 14:23:05 +0000 (08:23 -0600)]
Merge remote branch 'qmp/for-anthony' into staging
Anthony Liguori [Fri, 17 Dec 2010 14:22:31 +0000 (08:22 -0600)]
Merge remote branch 'jvrao/for-anthony' into staging
Anthony Liguori [Fri, 17 Dec 2010 14:21:29 +0000 (08:21 -0600)]
Merge remote branch 'mst/for_anthony' into staging
Stefan Hajnoczi [Tue, 7 Dec 2010 09:35:56 +0000 (09:35 +0000)]
qemu-img: Fail creation if backing format is invalid
The qemu-img create command should check the backing format to ensure
only image files with valid backing formats are created. By checking in
qemu-img.c we can print a useful error message.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Tue, 7 Dec 2010 09:35:55 +0000 (09:35 +0000)]
qemu-img: Free option parameter lists in img_create()
Free option parameter lists in the img_create() error return path.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Tue, 7 Dec 2010 09:35:54 +0000 (09:35 +0000)]
qemu-option: Fix parse_option_parameters() documentation typo
Yoda said, "list is the templace is". Fix this.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Tue, 7 Dec 2010 09:35:53 +0000 (09:35 +0000)]
qemu-option: Don't reinvent append_option_parameters()
parse_option_parameters() may need to create a new option parameter list
from a template list. Use append_option_parameters() instead of
duplicating the code.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Jes Sorensen [Tue, 7 Dec 2010 16:44:34 +0000 (17:44 +0100)]
qemu-img: Deprecate obsolete -6 and -e options
If -6 or -e is specified, an error message is printed and we exit. It
does not print help() to avoid the error message getting lost in the
noise.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Christian Brunner [Mon, 6 Dec 2010 19:53:01 +0000 (20:53 +0100)]
ceph/rbd block driver for qemu-kvm
RBD is an block driver for the distributed file system Ceph
(http://ceph.newdream.net/). This driver uses librados (which is part
of the Ceph server) for direct access to the Ceph object store and is
running entirely in userspace (Yehuda also wrote a driver for the
linux kernel, that can be used to access rbd volumes as a block
device).
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Christian Brunner <chb@muc.de>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Jes Sorensen [Mon, 6 Dec 2010 16:08:31 +0000 (17:08 +0100)]
Make error handling more consistent in img_create() and img_resize()
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Jes Sorensen [Mon, 6 Dec 2010 14:25:40 +0000 (15:25 +0100)]
Fail if detecting an unknown option
This patch changes qemu-img to exit if an unknown option is detected,
instead of trying to continue with a set of arguments which may be
incorrect.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Jes Sorensen [Mon, 6 Dec 2010 14:25:39 +0000 (15:25 +0100)]
Fix formatting and missing braces in qemu-img.c
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Jes Sorensen [Mon, 6 Dec 2010 14:25:38 +0000 (15:25 +0100)]
Consolidate printing of block driver options
This consolidates the printing of block driver options in
print_block_option_help() which is called from both img_create() and
img_convert().
This allows for the "?" detection to be done just after the parsing of
options and the filename, instead of half way down the codepath of
these functions.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Jes Sorensen [Mon, 6 Dec 2010 14:25:36 +0000 (15:25 +0100)]
img_convert(): Only try to free bs[] entries if bs is valid.
This allows for jumping to 'out:' consistently for error exit.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Jes Sorensen [Mon, 6 Dec 2010 14:25:35 +0000 (15:25 +0100)]
Use qemu_mallocz() instead of calloc() in img_convert()
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Jes Sorensen [Mon, 6 Dec 2010 14:25:34 +0000 (15:25 +0100)]
Add missing tracing to qemu_mallocz()
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Tue, 30 Nov 2010 15:14:14 +0000 (15:14 +0000)]
block: Make bdrv_create_file() ':' handling consistent
Filenames may start with "<protocol>:" to explicitly use a protocol like
nbd. Filenames with unknown protocols are rejected in most of QEMU
except for bdrv_create_file(). Even if a file with an invalid filename
can be created, QEMU cannot use it since all the other relevant
functions reject such paths. Make bdrv_create_file() consistent.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Richard W.M. Jones [Fri, 24 Sep 2010 15:08:06 +0000 (16:08 +0100)]
Watchdog: disable watchdog timer when hard-rebooting a guest.
This commit causes the watchdog timer to be reset when a guest is
hard-rebooted.
The failure case previously was as follows:
(a) guest boots, watchdog is enabled
(b) guest does a reset eg:
echo 'b' > /proc/sysrq-trigger
(note that an ordinary /sbin/reboot wouldn't hit this case
since as the watchdog daemon is shut down, the daemon would
properly disable the watchdog device)
(c) the reboot takes longer than the remaining time on the
watchdog
(d) the watchdog therefore fires during the reboot
(e) probably the VM would just reboot again at this point which
is pretty benign, but it could depend on the action that the
user had selected for the watchdog
Now we use the qdev reset function to register a reset handler
which disables the timer. Note the handler is called _either_
just after init _or_ when the guest reboots.
In the i6300esb case there is a small refactoring of the code so
that the device's internal state is now fully restored to defaults
on a reboot.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Gleb Natapov [Wed, 8 Dec 2010 11:35:09 +0000 (13:35 +0200)]
Pass boot device list to firmware.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Gleb Natapov [Wed, 8 Dec 2010 11:35:08 +0000 (13:35 +0200)]
Add notifier that will be called when machine is fully created.
Action that depends on fully initialized device model should register
with this notifier chain.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Gleb Natapov [Wed, 8 Dec 2010 11:35:07 +0000 (13:35 +0200)]
Add bootindex for option roms.
Extend -option-rom command to have additional parameter ,bootindex=.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Gleb Natapov [Wed, 8 Dec 2010 11:35:06 +0000 (13:35 +0200)]
Change fw_cfg_add_file() to get full file path as a parameter.
Change fw_cfg_add_file() to get full file path as a parameter instead
of building one internally. Two reasons for that. First caller may need
to know how file is named. Second this moves policy of file naming out
from fw_cfg. Platform may want to use more then two levels of
directories for instance.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Gleb Natapov [Wed, 8 Dec 2010 11:35:05 +0000 (13:35 +0200)]
Add bootindex parameter to net/block/fd device
If bootindex is specified on command line a string that describes device
in firmware readable way is added into sorted list. Later this list will
be passed into firmware to control boot order.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Gleb Natapov [Wed, 8 Dec 2010 11:35:04 +0000 (13:35 +0200)]
Add get_fw_dev_path callback to scsi bus.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Gleb Natapov [Wed, 8 Dec 2010 11:35:03 +0000 (13:35 +0200)]
Add get_fw_dev_path callback for usb bus.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Gleb Natapov [Wed, 8 Dec 2010 11:35:02 +0000 (13:35 +0200)]
Record which USBDevice USBPort belongs too.
Ports on root hub will have NULL here. This is needed to reconstruct
path from device to its root hub to build device path.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Gleb Natapov [Wed, 8 Dec 2010 11:35:01 +0000 (13:35 +0200)]
Add get_fw_dev_path callback for pci bus.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Gleb Natapov [Wed, 8 Dec 2010 11:35:00 +0000 (13:35 +0200)]
Add get_fw_dev_path callback for system bus.
Prints out mmio or pio used to access child device.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Gleb Natapov [Wed, 8 Dec 2010 11:34:59 +0000 (13:34 +0200)]
Add get_fw_dev_path callback to IDE bus.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Gleb Natapov [Wed, 8 Dec 2010 11:34:58 +0000 (13:34 +0200)]
Store IDE bus id in IDEBus structure for easy access.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Gleb Natapov [Wed, 8 Dec 2010 11:34:57 +0000 (13:34 +0200)]
Add get_fw_dev_path callback to ISA bus in qdev.
Use device ioports to create unique device path.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Gleb Natapov [Wed, 8 Dec 2010 11:34:56 +0000 (13:34 +0200)]
Keep track of ISA ports ISA device is using in qdev.
Store all io ports used by device in ISADevice structure.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Gleb Natapov [Wed, 8 Dec 2010 11:34:55 +0000 (13:34 +0200)]
Introduce new BusInfo callback get_fw_dev_path.
New get_fw_dev_path callback will be used for build device path usable
by firmware in contrast to qdev qemu internal device path.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Gleb Natapov [Wed, 8 Dec 2010 11:34:54 +0000 (13:34 +0200)]
Introduce fw_name field to DeviceInfo structure.
Add "fw_name" to DeviceInfo to use in device path building. In
contrast to "name" "fw_name" should refer to functionality device
provides instead of particular device model like "name" does.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sat, 11 Dec 2010 18:56:27 +0000 (18:56 +0000)]
monitor: implement x86 info mem for PAE and long modes
'info mem' didn't show correct information for PAE mode and
x86_64 long mode.
Fix by implementing the output for missing modes.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sat, 11 Dec 2010 18:56:24 +0000 (18:56 +0000)]
monitor: implement x86 info tlb for PAE and long modes
'info tlb' didn't show correct information for PAE mode and
x86_64 long mode.
Implement the missing modes. Also print NX bit for PAE and long modes.
Fix off-by-one error in 32 bit mode mask.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Bernhard Kohl [Wed, 8 Dec 2010 14:59:55 +0000 (15:59 +0100)]
wdt_i6300esb: register a reset function
The device shall set its default hardware state after each reset.
This includes that the timer is stopped which is especially important
if the guest does a reboot independantly of a watchdog bite. I moved
the initialization of the state variables completely from the init
to the reset function which is called right after init during the
first boot and afterwards during each reboot.
Signed-off-by: Bernhard Kohl <bernhard.kohl@nsn.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Tristan Gingold [Fri, 3 Dec 2010 11:05:03 +0000 (12:05 +0100)]
isa-bus.c: use hw_error instead of fprintf
Minor clean-up in isa-bus.c. Using hw_error is more consistent.
There is a difference however: hw_error dumps the cpu state.
Signed-off-by: Tristan Gingold <gingold@adacore.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Alexander Graf [Wed, 8 Dec 2010 11:05:50 +0000 (12:05 +0100)]
usb_ohci: Always use little endian
This patch replaces explicit bswaps with endianness hints to the
mmio layer.
Because we don't depend on the target endianness anymore, we can also
move the driver over to Makefile.objs.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Alexander Graf [Wed, 8 Dec 2010 11:05:49 +0000 (12:05 +0100)]
isa_mmio: Always use little endian
This patch converts the ISA MMIO bridge code to always use little endian mmio.
All bswap code that existed was only there to convert from native cpu
endianness to little endian ISA devices.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Alexander Graf [Wed, 8 Dec 2010 11:05:48 +0000 (12:05 +0100)]
heathrow_pic: Declare as little endian
This patch replaces explicit bswaps with endianness hints to the
mmio layer.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Alexander Graf [Wed, 8 Dec 2010 11:05:47 +0000 (12:05 +0100)]
rtl8139: Declare as little endian
This patch replaces explicit bswaps with endianness hints to the
mmio layer.
Because we don't depend on the target endianness anymore, we can also
move the driver over to Makefile.objs.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Alexander Graf [Wed, 8 Dec 2010 11:05:46 +0000 (12:05 +0100)]
openpic: Replace explicit byte swap with endian hints
This patch replaces explicit bswaps with endianness hints to the
mmio layer.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>