* elfxx-ia64.c (elfNN_ia64_check_relocs): Handle IPLT relocs.
        (allocate_dynrel_entries): Likewise.
        (elfNN_ia64_relocate_section): Likewise.  Set REL addends correctly.
        (set_pltoff_entry): Likewise.
        (ia64_howto_table): Remove R_IA64_SEGBASE, and R_IA64_EPLT[ML]SB
        (elfNN_ia64_reloc_type_lookup): Likewise.
        (elfNN_ia64_install_value): Likewise.
        (elfNN_ia64_relocate_section): Likewise.
        * reloc.c (BFD_RELOC_IA64_SEGBASE): Remove.
        (BFD_RELOC_IA64_EPLTMSB, BFD_RELOC_IA64_EPLTLSB): Remove.

Use "[  ]+" instead of "[  ]*".

2000-11-16  H.J. Lu  <hjl@gnu.org>

* gas/symver/symver0.d: Add 64bit support.
* gas/symver/symver1.d: Likewise.

2000-11-16  Kazu Hirata  <kazu@hxi.com>

* cpu-a29k.c: Fix formatting.
* cpu-alpha.c: Likewise.
* cpu-arm.c: Likewise.
* cpu-avr.c: Likewise.
* cpu-d10v.c: Likewise.
* cpu-h8500.c: Likewise.
* cpu-hppa.c: Likewise.
* cpu-i370.c: Likewise.
* cpu-i386.c: Likewise.
* cpu-i960.c: Likewise.
* cpu-ia64-opc.c: Likewise.
* cpu-ia64.c: Likewise.
* cpu-m32r.c: Likewise.
* cpu-m68hc11.c: Likewise.
* cpu-m68hc12.c: Likewise.
* cpu-m68k.c: Likewise.
* cpu-m88k.c: Likewise.
* cpu-mips.c: Likewise.
* cpu-ns32k.c: Likewise.
* cpu-pj.c: Likewise.
* cpu-powerpc.c: Likewise.
* cpu-sh.c: Likewise.
* cpu-sparc.c: Likewise.
* cpu-tic54x.c: Likewise.
* cpu-v850.c: Likewise.
* cpu-vax.c: Likewise.
* cpu-w65.c: Likewise.
* cpu-we32k.c: Likewise.
* cpu-z8k.c: Likewise.

* Makefile.in: Make import library creation 'make -j2' friendly.

2000-11-16  Kazu Hirata  <kazu@hxi.com>

* dwarf1.c: Fix formatting.
* dwarf2.c: Likewise.

2000-11-16  H.J. Lu  <hjl@gnu.org>

* config/obj-elf.c (obj_elf_symver): Don't check the missing
version name.

2000-11-16  H.J. Lu  <hjl@gnu.org>

* gas/symver/symver.exp: Don't run symver4 nor symver5.

New entry "Why doesn't mkdir -p work on a network share?"

* tracepoint.c (trace_find_tracepoint_command): Replace call to
parse_and_eval_address with a call to parse_and_eval_long as
we are evaluating an integer, not an address.
* top.c (show_commands): Ditto.

    * uinfo.cc (uinfo_init): Call `cygwin_set_impersonation_token' to
        reset `cygheap->user.token' to INVALID_HANDLE_VALUE.

* cplus-dem.c (ada_demangle): Add back ATTRIBUTE_UNUSED for
parameter `option'.
Do s/cplus_dem.c/cplus-dem.c/g on ChangeLog.

Update ChangeLog.

* sigproc.cc (wait_sig): Remove unneeded for loop iteration.
* exceptions.cc (interrupt_setup): Don't set signal mask here or races occur
with main thread.  Set it in sigdelayed instead.
(sigreturn): Reflect change in stack order of ebp and flags.
(sigdelayed): Set stack frame correctly.  Call set_process_mask here with flags
for last trapped signal.
(signal_dispatch): Add newmask.
* sigproc.cc (wait_sig): Eliminate ill-considered attempt to halt looping
signal processors.

2000-11-16  Ben Elliston  <bje@redhat.com>

* cgen-types.h (VOID): New type.

Fix ChangeLog entry: cplus-dem.c instead of cplus_dem.c

2000-11-15  Kazu Hirata  <kazu@hxi.com>

* config/tc-tic30.c: Fix formatting.
* config/tc-tic80.c: Likewise.
* config/tc-v850.c: Likewise.
* config/tc-vax.c: Likewise.
* config/tc-w65.c: Likewise.
* config/tc-z8k.c: Likewise.

2000-11-15  Kazu Hirata  <kazu@hxi.com>

* coff-rs6000.c: Fix formatting.
* coff-sh.c: Likewise.
* coff-sparc.c: Likewise.
* coff-tic30.c: Likewise.
* coff-tic54x.c: Likewise.
* coff-tic80.c: Likewise.
* coff-w65.c: Likewise.
* coff-we32k.c: Likewise.
* coff-z8k.c: Likewise.

    * emulparams/elf64alpha.sh (MAXPAGESIZE): Typo -- 64k, not 1M.

    * uinfo.cc (internal_getlogin): Change parameter list to reflect
        that `token' is member of cygheap_user now.
        (uinfo_init): Use modified internal_getlogin.
        * syscalls.cc (seteuid): Ditto.

    * cygheap.h: Move `token' and `impersonated' from class _pinfo
        to class cygheap_user.
        * pinfo.h: Ditto.
        * fork.cc (fork_child): Change usage of `token' and `impersonated'
        accordingly.
        (fork_parent): Ditto.
        * security.cc (cygwin_set_impersonation_token): Ditto.
        * sigproc.cc (proc_subproc): Ditto.
        * spawn.cc (spawn_guts): Ditto.
        * syscalls.cc (seteuid): Ditto.
        * uinfo.cc (uinfo_init): Ditto.

2000-11-15  Kazu Hirata  <kazu@hxi.com>

* coff-arm.c: Fix formatting.
* coff-ppc.c: Likewise.
* coff-rs6000.c: Likewise.

Protoization.

    * elf64-alpha.c (elf64_alpha_check_relocs): Create the reloc
        section with the same ALLOC|LOAD flags as the source section.

* config/tc-v850.c: Support dwarf2.
* config/tc-v850.h: Ditto.

* config/tc-v850.c (cons_fix_new_v850): Don't rely on
parse_cons_expression_v850 to initialize hold_cons_reloc.

[merge]
* cplus_dem.c: Eliminate use of DEFUN, it is obsolete and cannot
be used in GCC.

ops - omited from previous delta
Add GFPL to bfd.texinfo

Workaround for Itanium A/B step errata

* utils.c (strlen_paddr, paddr, paddr_nz): Use TARGET_ADDR_BIT,
not TARGET_PTR_BIT, since we are dealing with addresses, not
pointers.

Correct date and style of last entry

Correct date and style of last entry

* cplus_dem.c: Add gnat demangler.  Add java to demangle style
list.

* demangle.h: Add gnat and java demangle styles.

    * spawn.cc (spawn_guts): Revert patch to ignore chroot settings
        on creating native Win32 environment.

* fork.cc (slow_pid_reuse): Off-by-one.

Throughout use myself->ppid_handle rather than parent_alive.
* child_info.h (child_info): Eliminate parent_alive.
* dcrt0.cc (dll_crt0_1): Call fork_init for debugging pid creation.
* fork.cc (fork_child): Reflect change to fixup_mmaps_after_fork arguments.
(slow_pid_reuse): New function to grab last 'n' pids to prevent pid reuse.
(fork_parent): Move last_fork_proc into slow_pid_reuse.  Handle fork_pids
debugging.  Eliminate unnecessary call to set_child_mmap_ptr.
(fork_init): New debugging function.
* mmap.cc (fixup_mmaps_after_fork): Renamed from recreate_mmaps_after_fork.
Rely on copied data after a fork.
(set_child_mmap_ptr): Eliminate.
* pinfo.h (_pinfo): Eliminate parent_alive, mmap_ptr and reflect above changes.
* spawn.cc (spawn_guts): Eliminate vestiges of "old way" of sending new hProc
to parent process.

Fix formatting.

    * cygheap.cc (cygheap_root::cygheap_root): New function.
        (cygheap_root::~cygheap_root): Ditto.
        (cygheap_root::operator=): Ditto.
        (cygheap_user::~cygheap_user): Ditto.
        (cygheap_user::set_name): Ditto.
        (cygheap_user::set_logsrv): Ditto.
        (cygheap_user::set_domain): Ditto.
        (cygheap_user::set_sid): Ditto.
        * cygheap.h (cygheap_root): New class.
        (cygheap_user): Ditto.
        (init_cygheap): Change type of `root' member to cygheap_root.
        Add `user' member.
        * dir.cc (opendir): Use new `cygheap_root' class.
        * dcrt0.cc (dll_crt0_1): Use new `cygheap_user' class.
        * fork.cc (fork_parent): Ditto.
        * grp.cc (getgroups): Ditto.
        * passwd.cc (search_for): Ditto.
        * path.cc: Use new `cygheap_root' class throughout.
        * pinfo.h (_pinfo): Remove `use_psid'. Move `username', `psid',
        `logsrv', `domain', `orig_{uid,gid}' and `real_{uid,gid}' to
        cygheap_user class.
        * security.cc: Use new `cygheap_user' class throughout.
        * shared.cc (sec_user): Ditto.
        * sigproc.cc (proc_subproc): Remove copy statements for user
        related information moved to `cygheap_user' class.
        * spawn.cc (spawn_guts): Invalidate current chroot settings
        when creating Windows environment. Use new `cygheap_user' class.
        * syscalls.cc: Use new `cygheap_user' class throughout.
        * uinfo.cc: Ditto.
        * uinfo.cc (internal_getlogin): Change parameters to reflect the
        move of user information to cygheap.

Extend earlier ia64-hpux patches to work correctly for ia64-linux.
* config/tc-ia64.c (ia64_target_format): If EF_IA_64_BE not set, then
return little endian bfd formats.

2000-11-03  Michael Snyder  <msnyder@cleaver.cygnus.com>

        * config/monitor.exp (gdb_target_cmd): Abstracts some of the
        code from gdb_target_monitor, so it can be used independantly
        for gdbserver.  Also comment out an unnecessary PUTS.

2000-11-03  Michael Snyder  <msnyder@cleaver.cygnus.com>

        * gdb.base/a2-run.exp: Use gdb_skip_stdio_test.
        * gdb.base/corefile.exp: Expect the message "Program is being
        debugged already" when we send the "corefile" command, since
        the preceeding gdb_load may have connected gdb to a remote target.
        * gdb.base/display.exp: Disable hardware watchpoints if new
        board info variable "no_hardware_watchpoints" is true.
        Replace single-letter commands with more readable ones.
        * gdb.base/recurse.exp (recurse_tests): Disable hardware watchpoints
        if new board info variable "no_hardware_watchpoints" is true.
        * gdb.base/restore.exp (restore_tests): Call gdb_skip_stdio_tests
        to see if stdio (printf) testing is possible.
        * gdb.base/watchpoint.exp: Disable hardware watchpoints if new
        board info variable "no_hardware_watchpoints" is true.  Use new
        proc "gdb_skip_stdio_tests" to see if printf tests are possible.

2000-11-14  Kazu Hirata  <kazu@hxi.com>

* config/aout_gnu.h: Fix formatting.
* config/atof-vax.c: Likewise.
* config/m68k-parse.h: Likewise.
* config/m88k-opcode.h: Likewise.
* config/obj-elf.c: Likewise.
* config/tc-arm.c: Likewise.
* config/tc-cris.c: Likewise.
* config/tc-i386.c: Likewise.
* config/tc-ia64.c: Likewise.
* config/tc-mn10300.c: Likewise.
* config/te-386bsd.h: Likewise.
* config/te-hppa.h: Likewise.
* config/te-nbsd.h: Likewise.
* config/te-ppcnw.h: Likewise.
* config/te-sparcaout.h: Likewise.
* config/te-tmips.h: Likewise.
* config/vax-inst.h: Likewise.
* config/vms-conf.h: Likewise.

* elf64-alpha.c (elf64_alpha_relax_opt_call): Only check bits used
by STO_ALPHA constants.

* config/tc-alpha.c (s_alpha_prologue): Preserve visibility bits.

* cris-dis.c (cris_get_disassembler): If abfd is NULL, return
print_insn_cris_with_register_prefix.

2000-11-14  Kazu Hirata  <kazu@hxi.com>

* coff-pmac.c: Fix formatting.
* coff-ppc.c: Likewise.

2000-11-14  Kazu Hirata  <kazu@hxi.com>

* scripttempl/h8300.sc: Fix formatting.
* scripttempl/h8300h.sc: Likewise.
* scripttempl/h8300s.sc: Likewise.

From Kenneth Block <kenneth.block@compaq.com>

* demangle.c: Use libibery list of demanglers instead of out of
date local copy.

    * dir.cc (rewinddir): Always set __d_position = 0, so next
        call to readdir() will restart the directory scan.

Fix ``show remotewritesize'' was doing a set.

* cygheap.h (init_cygheap): New struct holding values that live in the Cygwin
heap.
* child_info.h (child_info): Change pointer type of cygheap to init_cygheap.
* cygheap.cc (init_cheap): Point cygheap_max after contents of cygheap.  Move
some stuff into cygheap.h.
* dir.cc (opendir): Change to use root and rootlen in cygheap rather than in
myself.
(mkdir): Change to use umask in cygheap rather than in myself.
* path.cc: Ditto, throughout.
* syscalls.cc (_open): Ditto.  Change to use umask in cygheap rather than in
myself.
(chroot): Change to allocate root dir on the cygwin heap.
(umask): Change to use umask in cygheap rather than in myself.
(cygwin_bind): Ditto.
* sigproc.cc (proc_subproc): Don't copy umask or root stuff as this happens
automatically now.
* pinfo.h (_pinfo): Migrate stuff out of here and into init_cheap.
* dcrt0.cc (dll_crt0_1): Call cygheap_init later in startup for first cygwin
process.

2000-11-13  Fernando Nasser  <fnasser@redhat.com>

        From Orjan Friberg  <orjanf@axis.com>:
        * gdb.base/printcmds.exp: Escape curly braces followed by a number
        in array print pattern match.

2000-11-08  H.J. Lu  <hjl@gnu.org>

* elflink.h (elf_link_add_object_symbols): Also add indirect
symbols for common symbols with the default version.

* scripttempl/elf32avr.sc: Fix bug in .eeprom segment.

2000-11-13  H.J. Lu  <hjl@gnu.org>

* gas/symver/symver.exp: New for symver test.
* gas/symver/symver0.d: Likewise.
* gas/symver/symver0.s: Likewise.
* gas/symver/symver1.d: Likewise.
* gas/symver/symver1.s: Likewise.
* gas/symver/symver2.l: Likewise.
* gas/symver/symver2.s: Likewise.
* gas/symver/symver3.l: Likewise.
* gas/symver/symver3.s: Likewise.
* gas/symver/symver4.l: Likewise.
* gas/symver/symver4.s: Likewise.
* gas/symver/symver5.l: Likewise.
* gas/symver/symver5.s: Likewise.
* gas/symver/symver6.l: Likewise.
* gas/symver/symver6.s: Likewise.

2000-11-13  H.J. Lu  <hjl@gnu.org>

* config/obj-elf.c (elf_frob_symbol): Support
".symver name,name2@@@nodename".
(elf_frob_file_before_adjust): Likewise.

* doc/as.texinfo: Updated for ".symver name,name2@@@nodename"
and ".symver name,name2@@@nodename".
Fix a typo.

fix errors in `df' docs

* config/djgpp/config.sed: Fix tweaking "VPATH=.:foo", and handle
        the gettext's posrcprefix correctly with drive letters.

2000-11-09  Philip Blundell  <pb@futuretv.com>

* emultempl/pe.em: Define ___start_SECNAME and ___stop_SECNAME
around orphan sections whose names can be represented in C.

2000-11-09  Philip Blundell  <pb@futuretv.com>

* section.c (STD_SECTION): Set gc_mark flag.

* path.cc (get_device_number): Allow /dev/ttySn to designate a com port.

2000-11-12  H.J. Lu  (hjl@gnu.org)

* config/obj-elf.c (obj_elf_symver): Check missing version
name.

2000-11-12  H.J. Lu  (hjl@gnu.org)

* dwarf2dbg.c (dwarf2_generate_asm_lineno): Use addressT
instead of bfd_vma for non-bfd assemblers.

* path.h: Add __attribute__ ((regparm(x))) to commonly used functions.
* pinfo.h: Ditto.
* sigproc.h: Ditto.
* sync.h: Ditto.

2000-11-11  Kazu Hirata  <kazu@hxi.com>

* coff-i960.c: Likewise.
* coff-m68k.c: Likewise.
* coff-m88k.c: Likewise.
* coff-mcore.c: Likewise.
* coff-mips.c: Likewise.

* parameter to enable sim decode/extract separation

2000-11-10  Frank Ch. Eigler  <fche@redhat.com>

* utils-sim.scm (-gen-decode-insn-entry): Add fn? parameter to signal
request to emit calls to insn extractors as functions rather than
branches to inline blocks.
(-gen-decode-expr-set-itype, -gen-decode-expr-entry): Ditto.
(-gen-decode-table-entry, -gen-decoder-switch, gen-decoder): Ditto.

* sim-decode.c (-gen-decode-fn): Tell (gen-decode) to emit branches
to extractor clauses.

* gas/macros/macros.exp: Mark strings test xfail for sh.

* elf32-sh.c (sh_elf_relocate_section): Ignore R_SH_NONE relocs.

* sh-opc.h: The operand of `mov.w r0, (<disp>,GBR)' is IMM1, not 0.

* dcrt0.cc: New global variable `ignore_case_with_glob'.
(dll_crt0_1): Disable case-insensitive globbing before calling `main'.
* environ.cc (glob_init): New static function to set or clear
`ignore_case_with_glob'.
(known): Changed "glob" entry to call `glob_init'.
* glob.c (match): Use case-insensitive globbing if needed.

* stabsread.c (read_range_type): Properly construct complex
type nodes.

2000-11-10  Fernando Nasser  <fnasser@totem.toronto.redhat.com>

* symtab.c (decode_line_1, total_number_of_methods, find_methods,
build_command_line_spec, find_toplevel_char, decode_line_2):
Move to linespec.c.
* linespec.c: New file. Routines that handle linespecs, formerly
in symtab.c.
* symtab.h: Export find_line_symtab and find_function_start_sal,
* Makefile.in: Add linespec.c.

2000-11-10  Kazu Hirata  <kazu@hxi.com>

* coff-h8300.c: Fix formatting.
* coff-h8500.c: Likewise.
* coff-i386.c: Likewise.
* coff-i860.c: Likewise.
* coff-i960.c: Likewise.
* coff-ia64.c: Likewise.

* inferior.h (step_over_calls_kind): New enum to clarify values in
step_over_calls.
* infcmd.c (step_over_calls): Change definition.
(step_1): Use new enum values in relation to step_over_calls.
(step_once): Ditto.
(until_next_command): Ditto.
* infrun.c (clear_proceed_status): Ditto.
(handle_inferior_event): Ditto.
* inferior.h (step_stop_if_no_debug): New variable.
* infrun.c (step_stop_if_no_debug): Declare.
(handle_inferior_event): Stop the step command if we entered a function without
line info.
(_initialize_infrun): New command 'set step-mode' to control the step command.
* infcmd.c (step_once): Switch to stepi mode if there is no line info
(and switching is enabled).

2000-11-10  J.T. Conklin  <jtc@redback.com>

        * target.c (do_xfer_memory): Only perform a single memory transfer
        instead of iterating to tranfer the entire region.  Higher layers
        are expected to call this function multiple times for partial
        transfers.
        (target_xfer_memory_partial): Remove unused local variables.

2000-11-10  Nick Duffek  <nsd@redhat.com>

        * target.c (target_xfer_memory_partial): Return bytes transferred
        instead of 0.

* major sim decoder improvement
* minor diagnostic tweaks

2000-11-10  Frank Ch. Eigler  <fche@redhat.com>

* decode.scm (-distinguishing-bit-population): Significantly
improve popularity heuristic.  Renamed from
(-mask-bit-population): Gone.
(-population-above-threshold): Sort new bit numbers in order of
popularity.
(-population-top-few): Allow up to three more bits to be selected
than requested.  Correct selection order to prefer better bits.
Correct bug in fewer-than-requested case.  Keep threshold as
floating-point.
(decode-best-get-bits): Pass also the insn-values.

* utils-sim.scm (-gen-decoder-switch): Add comment suggesting a
future optimization.

* utils.scm (message): Format nested lists better.

2000-11-09  Kazu Hirata  <kazu@hxi.com>

* archive.c: Fix formatting.
* archures.c: Likewise.

Protoization.

Add code for relocating dynamic executables.

2000-11-09  Kazu Hirata  <kazu@hxi.com>

* itbl-ops.c: Fix comment typos.

2000-11-09  Fernando Nasser  <fnasser@redhat.com>

        * gdb.c++/templates.exp (test_template_breakpoints): Change Britsh
        spelling "cancelled" to U.S. spelling "canceled" to match changes
        made to gdb.
        * gdb.c++/ovldbreak.exp: Ditto.

* config/i386/nbsd.mh: Remove solib.o, solib-svr4.o from NATDEPFILES.
* config/i386/nbsdelf.mh: Likewise.
* config/m68k/nbsd.mh: Likewise.
* config/ns32k/nbsd.mh: Likewise.
* config/powerpc/nbsd.mh: Likewise.
* config/sparc/nbsd.mh: Likewise.
* config/sparc/nbsdelf.mh: Likewise.
* config/i386/nbsd.mt: Add solib.o, solib-svr4.o to TDEPFILES.
* config/i386/nbsdelf.mt: Likewise.
* config/m68k/nbsd.mt: Likewise.
* config/ns32k/nbsd.mt: Likewise.
* config/powerpc/nbsd.mt: Likewise.
* config/sparc/nbsd.mt: Likewise.

* dev.scm: Add srcdir to %load-path.

* rtx-funcs.scm (subword): Mode of argument can be different
than mode of result, so don't use OP0 to specify argument's mode.

remove include/rapi.h

    * dir.cc (readdir): Avoid reading from the beginning when
        readdir is called after a previous call has returned NULL.

Add auto-solib-add support for AIX, remove obsolete and unused
SOLIB_SYMBOLS_MANUAL code, cleanup of AIX shared library handling code.
* rs6000-nat.c (vmap_symtab):  Do not try to modify offsets
if symbols are not yet loaded.
(vmap_add_symbols):  New function to add symbols for a vmap entry.
(add_vmap):  Turn errors into warnings, return NULL vmap upon
failure. Add symbols via vmap_add_symbols only if requested.
(xcoff_relocate_core):  Allow debugging of core files without an
executable file. Handle NULL returns from add_vmap gracefully.
* xcoffsolib.c (solib_add):  Remove, no longer needed.
(solib_info):  Do not check for new shared libraries if there is no
inferior process.
(sharedlibrary_command):  Made static.
Do not check for new shared libraries if there is no inferior process.
Add symbols for requested shared libraries via vmap_add_symbols.
(_initialize_solib):  Add `set auto-solib-add' command.
* xcoffsolib.h (vmap_add_symbols):  Add prototype declaration.

* config/rs6000/tm-rs6000.h (PC_LOAD_SEGMENT):  Move from here ...
* config/rs6000/nm-rs6000.h:  ... to here, this is an AIX native
feature.
* config/powerpc/tm-macos.h, config/powerpc/tm-ppc-eabi.h,
config/powerpc/tm-ppc-nw.h, config/rs6000/tm-rs6000ly.h:
Remove #undef PC_LOAD_SEGMENT.
* config/powerpc/aix.mt, config/rs6000/aix4.mt, config/rs6000/rs6000.mt
(TDEPFILES):  Move xcoffsolib.o from here ...
* config/powerpc/aix.mh, config/rs6000/aix4.mh, config/rs6000/rs6000.mh
(NATDEPFILES):  ... to here, xcoffsolib.o contains AIX native code
only.
* rs6000-tdep.c:  Remove #include xcoffsolib.h, no longer needed.
* xcoffsolib.h (xcoff_relocate_symtab_hook):  Remove declaration.
* rs6000-nat.c (_initialize_core_rs6000):  Remove setting of
xcoff_relocate_symtab_hook, no longer needed.
* xcoffsolib.c (solib_info, sharedlibrary_command):  Remove
xcoff_relocate_symtab_hook indirection, call xcoff_relocate_symtab
directly, as xcoffsolib.c is now compiled in native AIX configurations
only.
* Makefile.in:  Update dependencies for rs6000-tdep.o, rs6000-nat.o
and xcoffsolib.o.

* MAINTAINERS: Specify the vax-dec-vms5.5 target tupple.
* vax-tdep.c: Include "gdbcore.h", "frame.h" and "value.h".
(vax_print_insn): Change ``d'' to a const char pointer.

Increase cygwin heap size.

* select.cc (peek_pipe): Deal with pending newline in pty_

2000-11-08  Kazu Hirata  <kazu@hxi.com>

* coff-a29k.c: Fix formatting.
* coff-alpha.c: Likewise.
* coff-apollo.c: Likewise.
* coff-aux.c: Likewise.

2000-11-08  Michael Snyder  <msnyder@cleaver.cygnus.com>

        * gdbarch.sh: Spelling correction: registrary -> registry.
        * gdbarch.c: Ditto.

2000-11-08  Kazu Hirata  <kazu@hxi.com>

* bfd-in.h: Fix formatting.
* bfd-in2.h: Likewise.

2000-11-09  Ben Elliston  <bje@redhat.com>

* sim-fpu.c (sim_fpu_one): Set exponent to 0.
(sim_fpu_two): Set exponent to 1.

* Spelling corrections.

Correct unwind region length calculations.
* config/tc-ia64.c (struct unw_rec_list): Add slot_frag field.
(struct unwind): Add next_slot_frag field.
(slot_index): New parameters slot_frag and first_frag.  Add code
to add in frag sizes when different.  Add comments.
(fixup_unw_records): New locals first_frag and last_frag.  Pass new
arguments to slot_index.
(emit_one_bundle): Set slot_frag field.  Set next_slot_number after
loop end.  Set next_slot_frag field.

* mount.cc (main): Call show_cygdrive_info instead of show_cygdrive_prefixes.
* mount.cc (show_cygdrive_prefixes): Remove function.
* mount.cc (show_cygdrive_info): New function.  Actually, show_cygdrive_info is
really an enhanced version of show_cygdrive_prefixes renamed to
show_cygdrive_info that also displays the user and system flags.

* environ.cc (_addenv): malloc space for setenv if cygwin1.dll is used in
conjunction with older binaries.
(environ_init): Ditto.
* external.cc (get_cygdrive_info): New function.
* external.cc (get_cygdrive_prefixes): Change to use get_cygdrive_info but toss
the user and system flags.
* external.cc (cygwin_internal): Add new CW_GET_CYGDRIVE_INFO case.
* path.cc (mount_info::get_cygdrive_prefixes): Remove method.
* path.cc (mount_info::get_cygdrive_info): New method.  Actually,
get_cygdrive_info is really an enhanced version of get_cygdrive_prefixes
renamed to get_cygdrive_info that also gets the user and system flags.
* shared_info.h (get_cygdrive_prefixes): Remove method.
* shared_info.h (get_cygdrive_info): New method.
* include/cygwin/version.h: Bump minor API version due to adding
CW_GET_CYGDRIVE_INFO to cygwin_internal.
* include/sys/cygwin.h (cygwin_getinfo_types): Add CW_GET_CYGDRIVE_INFO.

    * mkgroup.c (load_netapi): New function to load netapi32.dll functions
        dynamically so that mkgroup works on 9x/ME as well.
        Use corresponding function pointers throughout.
        (usage): Change to `int'. Change text to be conformant to mkpasswd.
        (main): Use `getlongopt' to process options.
        Special handling to create a group entry on 9x/ME.
        * mkpasswd.c (load_netapi): New function to load netapi32.dll functions
        dynamically so that mkpasswd works on 9x/ME as well.
        Use corresponding function pointers throughout.
        (usage): Change to `int'. Change text to be conformant to mkgroup.
        (main): Use `getlongopt' to process options.
        Special handling to create a passwd entry on 9x/ME.
        Change conditional to create an entry for the local administrators
        group when appropriate.

Work around targets that don't yet define JB_PC or JB_ELEMENT_SIZE.

Rename get_longjmp_target to m68k_get_longjmp_target.  Update all m68k
targets.

* gdbserver/configure.in (files): Don't link nm-empty.h when a
non-native target.
* configure: Regenerate.