OSDN Git Service
Jaegeuk Kim [Thu, 16 Jun 2016 23:44:11 +0000 (16:44 -0700)]
f2fs: avoid writing node/metapages during writes
Let's keep more node/meta pages in run time.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Thu, 16 Jun 2016 23:41:49 +0000 (16:41 -0700)]
f2fs: produce more nids and reduce readahead nats
The readahead nat pages are more likely to be reclaimed quickly, so it'd better
to gather more free nids in advance.
And, let's keep some free nids as much as possible.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Mon, 13 Jun 2016 16:47:48 +0000 (09:47 -0700)]
f2fs: detect host-managed SMR by feature flag
If mkfs.f2fs gives a feature flag for host-managed SMR, we can set mode=lfs
by default.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Tue, 14 Jun 2016 01:27:02 +0000 (18:27 -0700)]
f2fs: call update_inode_page for orphan inodes
Let's store orphan inode pages right away.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Thu, 9 Jun 2016 21:57:19 +0000 (14:57 -0700)]
f2fs: report error for f2fs_parent_dir
If there is no dentry, we can report its error correctly.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Sheng Yong [Sat, 4 Jun 2016 14:01:28 +0000 (22:01 +0800)]
f2fs: find parent dentry correctly
If dotdot directory is corrupted, its slot may be ocupied by another
file. In this case, dentry[1] is not the parent directory. Rename and
cross-rename will update the inode in dentry[1] incorrectly. This
patch finds dotdot dentry by name.
Signed-off-by: Sheng Yong <shengyong1@huawei.com>
[Jaegeuk Kim: remove wron bug_on]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Tue, 7 Jun 2016 21:34:22 +0000 (14:34 -0700)]
f2fs: fix deadlock in add_link failure
mkdir sync_dirty_inode
- init_inode_metadata
- lock_page(node)
- make_empty_dir
- filemap_fdatawrite()
- do_writepages
- lock_page(data)
- write_page(data)
- lock_page(node)
- f2fs_init_acl
- error
- truncate_inode_pages
- lock_page(data)
So, we don't need to truncate data pages in this error case, which will
be done by f2fs_evict_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Sat, 4 Jun 2016 02:29:38 +0000 (19:29 -0700)]
f2fs: introduce mode=lfs mount option
This mount option is to enable original log-structured filesystem forcefully.
So, there should be no random writes for main area.
Especially, this supports host-managed SMR device.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Tue, 7 Jun 2016 01:49:54 +0000 (18:49 -0700)]
f2fs: skip clean segment for gc
If a segment in a section is clean or prefreed, we don't need to get its summary
and do gc.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Sat, 4 Jun 2016 21:25:24 +0000 (14:25 -0700)]
f2fs: drop any block plugging
In f2fs, we don't need to keep block plugging for NODE and DATA writes, since
we already merged bios as much as possible.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Sat, 4 Jun 2016 21:21:28 +0000 (14:21 -0700)]
f2fs: avoid reverse IO order for NODE and DATA
There is a data race between allocate_data_block() and f2fs_sbumit_page_mbio(),
which incur unnecessary reversed bio submission.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Fri, 3 Jun 2016 19:28:26 +0000 (12:28 -0700)]
f2fs: set mapping error for EIO
If EIO occurred, we need to set all the mapping to avoid any further IOs.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Thu, 2 Jun 2016 22:24:24 +0000 (15:24 -0700)]
f2fs: control not to exceed # of cached nat entries
This is to avoid cache entry management overhead including radix tree.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Thu, 2 Jun 2016 22:26:27 +0000 (15:26 -0700)]
f2fs: fix wrong percentage
This should be 1%, 10MB / 1GB.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Thu, 2 Jun 2016 21:15:56 +0000 (14:15 -0700)]
f2fs: avoid data race between FI_DIRTY_INODE flag and update_inode
FI_DIRTY_INODE flag is not covered by inode page lock, so it can be unset
at any time like below.
Thread #1 Thread #2
- lock_page(ipage)
- update i_fields
- update i_size/i_blocks/and so on
- set FI_DIRTY_INODE
- reset FI_DIRTY_INODE
- set_page_dirty(ipage)
In this case, we can lose the latest i_field information.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Thu, 2 Jun 2016 20:49:38 +0000 (13:49 -0700)]
f2fs: remove obsolete parameter in f2fs_truncate
We don't need lock parameter, which is always true.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Thu, 2 Jun 2016 18:08:56 +0000 (11:08 -0700)]
f2fs: avoid wrong count on dirty inodes
The number should be covered by spin_lock. Otherwise we can see wrong count
in f2fs_stat.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Thu, 2 Jun 2016 04:18:25 +0000 (21:18 -0700)]
f2fs: remove deprecated parameter
Remove deprecated paramter.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Mon, 30 May 2016 04:18:23 +0000 (21:18 -0700)]
f2fs: handle writepage correctly
Previously, f2fs_write_data_pages() calls __f2fs_writepage() which calls
f2fs_write_data_page().
If f2fs_write_data_page() returns AOP_WRITEPAGE_ACTIVATE, __f2fs_writepage()
calls mapping_set_error(). But, this should not happen at every time, since
sometimes f2fs_write_data_page() tries to skip writing pages without error.
For example, volatile_write() gives EIO all the time, as Shuoran Liu pointed
out.
Reported-by: Shuoran Liu <liushuoran@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Fri, 27 May 2016 17:10:41 +0000 (10:10 -0700)]
f2fs: return error of f2fs_lookup
Now we can report an error to f2fs_lookup given by f2fs_find_entry.
Suggested-by: He YunLei <heyunlei@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Yunlong Song [Thu, 26 May 2016 11:40:29 +0000 (19:40 +0800)]
f2fs: return the errno to the caller to avoid using a wrong page
Commit
aaf9607516ed38825268515ef4d773289a44f429 ("f2fs: check node page
contents all the time") pointed out that "sometimes it was reported that
its contents was missing", so it checks the page's mapping and contents.
When "nid != nid_of_node(page)", ERR_PTR(-EIO) will be returned to the
caller. However, commit
e1c51b9f1df2f9efc2ec11488717e40cd12015f9 ("f2fs:
clean up node page updating flow") moves "nid != nid_of_node(page)" test
to "f2fs_bug_on(sbi, nid != nid_of_node(page))", this will return a
wrong page to the caller when F2FS_CHECK_FS is off when "sometimes it
was reported that its contents was missing" happens.
This patch restores to check node page contents all the time, and
returns the errno to make the caller known something is wrong and avoid
to use the page. This patch also moves f2fs_bug_on to its proper location.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Thu, 26 May 2016 03:57:16 +0000 (20:57 -0700)]
f2fs: remove two steps to flush dirty data pages
If there is no cold page, we don't need to do a loop to flush dirty
data pages.
On /dev/pmem0,
1. dd if=/dev/zero of=/mnt/test/testfile bs=1M count=2048 conv=fsync
Before : 1.1 GB/s
After : 1.2 GB/s
2. dd if=/dev/zero of=/mnt/test/testfile bs=1M count=2048
Before : 2.2 GB/s
After : 2.3 GB/s
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Thu, 26 May 2016 00:17:56 +0000 (17:17 -0700)]
f2fs: do not skip writing data pages
For data pages, let's try to flush as much as possible in background.
On /dev/pmem0,
1. dd if=/dev/zero of=/mnt/test/testfile bs=1M count=2048 conv=fsync
Before : 800 MB/s
After : 1.1 GB/s
2. dd if=/dev/zero of=/mnt/test/testfile bs=1M count=2048
Before : 1.3 GB/s
After : 2.2 GB/s
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Wed, 25 May 2016 22:24:18 +0000 (15:24 -0700)]
f2fs: inject to produce some orphan inodes
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Wed, 25 May 2016 21:29:11 +0000 (14:29 -0700)]
f2fs: propagate error given by f2fs_find_entry
If we get ENOMEM or EIO in f2fs_find_entry, we should stop right away.
Otherwise, for example, we can get duplicate directory entry by ->chash and
->clevel.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Sat, 21 May 2016 05:50:29 +0000 (22:50 -0700)]
f2fs: remove writepages lock
This patch removes writepages lock.
We can improve multi-threading performance.
tiobench, 32 threads, 4KB write per fsync on SSD
Before: 25.88 MB/s
After: 28.03 MB/s
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Sat, 21 May 2016 05:39:20 +0000 (22:39 -0700)]
f2fs: set flush_merge by default
This patch sets flush_merge by default.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Mon, 23 May 2016 19:04:56 +0000 (12:04 -0700)]
f2fs: detect congestion of flush command issues
If flush commands do not incur any congestion, we don't need to throw that to
dispatching queue which causes unnecessary latency.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Sat, 21 May 2016 04:47:24 +0000 (21:47 -0700)]
f2fs: add lazytime mount option
This patch adds lazytime support.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Sat, 21 May 2016 03:42:37 +0000 (20:42 -0700)]
f2fs: avoid unnecessary updating inode during fsync
If roll-forward recovery can recover i_size, we don't need to update inode's
metadata during fsync.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Fri, 20 May 2016 23:32:49 +0000 (16:32 -0700)]
f2fs: remove syncing inode page in all the cases
This patch reduces to call them across the whole tree.
- sync_inode_page()
- update_inode_page()
- update_inode()
- f2fs_write_inode()
Instead, checkpoint will flush all the dirty inode metadata before syncing
node pages.
Note that, this is doable, since we call mark_inode_dirty_sync() for all
inode's field change which needs to update on-disk inode as well.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Fri, 20 May 2016 18:10:10 +0000 (11:10 -0700)]
f2fs: flush inode metadata when checkpoint is doing
This patch registers all the inodes which have dirty metadata to sync when
checkpoint is doing.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Fri, 20 May 2016 16:52:20 +0000 (09:52 -0700)]
f2fs: call mark_inode_dirty_sync for i_field changes
This patch calls mark_inode_dirty_sync() for the following on-disk inode
changes.
-> largest
-> ctime/mtime/atime
-> i_current_depth
-> i_xattr_nid
-> i_pino
-> i_advise
-> i_flags
-> i_mode
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Fri, 20 May 2016 16:43:20 +0000 (09:43 -0700)]
f2fs: introduce f2fs_i_links_write with mark_inode_dirty_sync
This patch introduces f2fs_i_links_write() to call mark_inode_dirty_sync() when
changing inode->i_links.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Fri, 20 May 2016 16:26:06 +0000 (09:26 -0700)]
f2fs: introduce f2fs_i_blocks_write with mark_inode_dirty_sync
This patch introduces f2fs_i_blocks_write() to call mark_inode_dirty_sync() when
changing inode->i_blocks.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Fri, 20 May 2016 16:22:03 +0000 (09:22 -0700)]
f2fs: introduce f2fs_i_size_write with mark_inode_dirty_sync
This patch introduces f2fs_i_size_write() to call mark_inode_dirty_sync() with
i_size_write().
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Fri, 20 May 2016 17:13:22 +0000 (10:13 -0700)]
f2fs: use inode pointer for {set, clear}_inode_flag
This patch refactors to use inode pointer for set_inode_flag and
clear_inode_flag.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Thu, 2 Jun 2016 03:55:51 +0000 (20:55 -0700)]
Revert "f2fs: no need inc dirty pages under inode lock"
This reverts commit
b951a4ec165af4973b2bd9c80fb5845fbd840435.
Conflicts:
fs/f2fs/checkpoint.c
Linus Torvalds [Thu, 2 Jun 2016 22:08:06 +0000 (15:08 -0700)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
"ARM:
- two fixes for 4.6 vgic [Christoffer] (cc stable)
- six fixes for 4.7 vgic [Marc]
x86:
- six fixes from syzkaller reports [Paolo] (two of them cc stable)
- allow OS X to boot [Dmitry]
- don't trust compilers [Nadav]"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: fix OOPS after invalid KVM_SET_DEBUGREGS
KVM: x86: avoid vmalloc(0) in the KVM_SET_CPUID
KVM: irqfd: fix NULL pointer dereference in kvm_irq_map_gsi
KVM: fail KVM_SET_VCPU_EVENTS with invalid exception number
KVM: x86: avoid vmalloc(0) in the KVM_SET_CPUID
kvm: x86: avoid warning on repeated KVM_SET_TSS_ADDR
KVM: Handle MSR_IA32_PERF_CTL
KVM: x86: avoid write-tearing of TDP
KVM: arm/arm64: vgic-new: Removel harmful BUG_ON
arm64: KVM: vgic-v3: Relax synchronization when SRE==1
arm64: KVM: vgic-v3: Prevent the guest from messing with ICC_SRE_EL1
arm64: KVM: Make ICC_SRE_EL1 access return the configured SRE value
KVM: arm/arm64: vgic-v3: Always resample level interrupts
KVM: arm/arm64: vgic-v2: Always resample level interrupts
KVM: arm/arm64: vgic-v3: Clear all dirty LRs
KVM: arm/arm64: vgic-v2: Clear all dirty LRs
Paolo Bonzini [Wed, 1 Jun 2016 12:09:23 +0000 (14:09 +0200)]
KVM: x86: fix OOPS after invalid KVM_SET_DEBUGREGS
MOV to DR6 or DR7 causes a #GP if an attempt is made to write a 1 to
any of bits 63:32. However, this is not detected at KVM_SET_DEBUGREGS
time, and the next KVM_RUN oopses:
general protection fault: 0000 [#1] SMP
CPU: 2 PID: 14987 Comm: a.out Not tainted 4.4.9-300.fc23.x86_64 #1
Hardware name: LENOVO
2325F51/
2325F51, BIOS G2ET32WW (1.12 ) 05/30/2012
[...]
Call Trace:
[<
ffffffffa072c93d>] kvm_arch_vcpu_ioctl_run+0x141d/0x14e0 [kvm]
[<
ffffffffa071405d>] kvm_vcpu_ioctl+0x33d/0x620 [kvm]
[<
ffffffff81241648>] do_vfs_ioctl+0x298/0x480
[<
ffffffff812418a9>] SyS_ioctl+0x79/0x90
[<
ffffffff817a0f2e>] entry_SYSCALL_64_fastpath+0x12/0x71
Code: 55 83 ff 07 48 89 e5 77 27 89 ff ff 24 fd 90 87 80 81 0f 23 fe 5d c3 0f 23 c6 5d c3 0f 23 ce 5d c3 0f 23 d6 5d c3 0f 23 de 5d c3 <0f> 23 f6 5d c3 0f 0b 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00
RIP [<
ffffffff810639eb>] native_set_debugreg+0x2b/0x40
RSP <
ffff88005836bd50>
Testcase (beautified/reduced from syzkaller output):
#include <unistd.h>
#include <sys/syscall.h>
#include <string.h>
#include <stdint.h>
#include <linux/kvm.h>
#include <fcntl.h>
#include <sys/ioctl.h>
long r[8];
int main()
{
struct kvm_debugregs dr = { 0 };
r[2] = open("/dev/kvm", O_RDONLY);
r[3] = ioctl(r[2], KVM_CREATE_VM, 0);
r[4] = ioctl(r[3], KVM_CREATE_VCPU, 7);
memcpy(&dr,
"\x5d\x6a\x6b\xe8\x57\x3b\x4b\x7e\xcf\x0d\xa1\x72"
"\xa3\x4a\x29\x0c\xfc\x6d\x44\x00\xa7\x52\xc7\xd8"
"\x00\xdb\x89\x9d\x78\xb5\x54\x6b\x6b\x13\x1c\xe9"
"\x5e\xd3\x0e\x40\x6f\xb4\x66\xf7\x5b\xe3\x36\xcb",
48);
r[7] = ioctl(r[4], KVM_SET_DEBUGREGS, &dr);
r[6] = ioctl(r[4], KVM_RUN, 0);
}
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Paolo Bonzini [Wed, 1 Jun 2016 12:09:22 +0000 (14:09 +0200)]
KVM: x86: avoid vmalloc(0) in the KVM_SET_CPUID
This causes an ugly dmesg splat. Beautified syzkaller testcase:
#include <unistd.h>
#include <sys/syscall.h>
#include <sys/ioctl.h>
#include <fcntl.h>
#include <linux/kvm.h>
long r[8];
int main()
{
struct kvm_irq_routing ir = { 0 };
r[2] = open("/dev/kvm", O_RDWR);
r[3] = ioctl(r[2], KVM_CREATE_VM, 0);
r[4] = ioctl(r[3], KVM_SET_GSI_ROUTING, &ir);
return 0;
}
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Paolo Bonzini [Wed, 1 Jun 2016 12:09:21 +0000 (14:09 +0200)]
KVM: irqfd: fix NULL pointer dereference in kvm_irq_map_gsi
Found by syzkaller:
BUG: unable to handle kernel NULL pointer dereference at
0000000000000120
IP: [<
ffffffffa0797202>] kvm_irq_map_gsi+0x12/0x90 [kvm]
PGD
6f80b067 PUD
b6535067 PMD 0
Oops: 0000 [#1] SMP
CPU: 3 PID: 4988 Comm: a.out Not tainted 4.4.9-300.fc23.x86_64 #1
[...]
Call Trace:
[<
ffffffffa0795f62>] irqfd_update+0x32/0xc0 [kvm]
[<
ffffffffa0796c7c>] kvm_irqfd+0x3dc/0x5b0 [kvm]
[<
ffffffffa07943f4>] kvm_vm_ioctl+0x164/0x6f0 [kvm]
[<
ffffffff81241648>] do_vfs_ioctl+0x298/0x480
[<
ffffffff812418a9>] SyS_ioctl+0x79/0x90
[<
ffffffff817a1062>] tracesys_phase2+0x84/0x89
Code: b5 71 a7 e0 5b 41 5c 41 5d 5d f3 c3 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 8b 8f 10 2e 00 00 31 c0 48 89 e5 <39> 91 20 01 00 00 76 6a 48 63 d2 48 8b 94 d1 28 01 00 00 48 85
RIP [<
ffffffffa0797202>] kvm_irq_map_gsi+0x12/0x90 [kvm]
RSP <
ffff8800926cbca8>
CR2:
0000000000000120
Testcase:
#include <unistd.h>
#include <sys/syscall.h>
#include <string.h>
#include <stdint.h>
#include <linux/kvm.h>
#include <fcntl.h>
#include <sys/ioctl.h>
long r[26];
int main()
{
memset(r, -1, sizeof(r));
r[2] = open("/dev/kvm", 0);
r[3] = ioctl(r[2], KVM_CREATE_VM, 0);
struct kvm_irqfd ifd;
ifd.fd = syscall(SYS_eventfd2, 5, 0);
ifd.gsi = 3;
ifd.flags = 2;
ifd.resamplefd = ifd.fd;
r[25] = ioctl(r[3], KVM_IRQFD, &ifd);
return 0;
}
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Paolo Bonzini [Wed, 1 Jun 2016 12:09:20 +0000 (14:09 +0200)]
KVM: fail KVM_SET_VCPU_EVENTS with invalid exception number
This cannot be returned by KVM_GET_VCPU_EVENTS, so it is okay to return
EINVAL. It causes a WARN from exception_type:
WARNING: CPU: 3 PID: 16732 at arch/x86/kvm/x86.c:345 exception_type+0x49/0x50 [kvm]()
CPU: 3 PID: 16732 Comm: a.out Tainted: G W 4.4.6-300.fc23.x86_64 #1
Hardware name: LENOVO
2325F51/
2325F51, BIOS G2ET32WW (1.12 ) 05/30/2012
0000000000000286 000000006308a48b ffff8800bec7fcf8 ffffffff813b542e
0000000000000000 ffffffffa0966496 ffff8800bec7fd30 ffffffff810a40f2
ffff8800552a8000 0000000000000000 00000000002c267c 0000000000000001
Call Trace:
[<
ffffffff813b542e>] dump_stack+0x63/0x85
[<
ffffffff810a40f2>] warn_slowpath_common+0x82/0xc0
[<
ffffffff810a423a>] warn_slowpath_null+0x1a/0x20
[<
ffffffffa0924809>] exception_type+0x49/0x50 [kvm]
[<
ffffffffa0934622>] kvm_arch_vcpu_ioctl_run+0x10a2/0x14e0 [kvm]
[<
ffffffffa091c04d>] kvm_vcpu_ioctl+0x33d/0x620 [kvm]
[<
ffffffff81241248>] do_vfs_ioctl+0x298/0x480
[<
ffffffff812414a9>] SyS_ioctl+0x79/0x90
[<
ffffffff817a04ee>] entry_SYSCALL_64_fastpath+0x12/0x71
---[ end trace
b1a0391266848f50 ]---
Testcase (beautified/reduced from syzkaller output):
#include <unistd.h>
#include <sys/syscall.h>
#include <string.h>
#include <stdint.h>
#include <fcntl.h>
#include <sys/ioctl.h>
#include <linux/kvm.h>
long r[31];
int main()
{
memset(r, -1, sizeof(r));
r[2] = open("/dev/kvm", O_RDONLY);
r[3] = ioctl(r[2], KVM_CREATE_VM, 0);
r[7] = ioctl(r[3], KVM_CREATE_VCPU, 0);
struct kvm_vcpu_events ve = {
.exception.injected = 1,
.exception.nr = 0xd4
};
r[27] = ioctl(r[7], KVM_SET_VCPU_EVENTS, &ve);
r[30] = ioctl(r[7], KVM_RUN, 0);
return 0;
}
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Paolo Bonzini [Wed, 1 Jun 2016 12:09:19 +0000 (14:09 +0200)]
KVM: x86: avoid vmalloc(0) in the KVM_SET_CPUID
This causes an ugly dmesg splat. Beautified syzkaller testcase:
#include <unistd.h>
#include <sys/syscall.h>
#include <sys/ioctl.h>
#include <fcntl.h>
#include <linux/kvm.h>
long r[8];
int main()
{
struct kvm_cpuid2 c = { 0 };
r[2] = open("/dev/kvm", O_RDWR);
r[3] = ioctl(r[2], KVM_CREATE_VM, 0);
r[4] = ioctl(r[3], KVM_CREATE_VCPU, 0x8);
r[7] = ioctl(r[4], KVM_SET_CPUID, &c);
return 0;
}
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Paolo Bonzini [Wed, 1 Jun 2016 12:09:18 +0000 (14:09 +0200)]
kvm: x86: avoid warning on repeated KVM_SET_TSS_ADDR
Found by syzkaller:
WARNING: CPU: 3 PID: 15175 at arch/x86/kvm/x86.c:7705 __x86_set_memory_region+0x1dc/0x1f0 [kvm]()
CPU: 3 PID: 15175 Comm: a.out Tainted: G W 4.4.6-300.fc23.x86_64 #1
Hardware name: LENOVO
2325F51/
2325F51, BIOS G2ET32WW (1.12 ) 05/30/2012
0000000000000286 00000000950899a7 ffff88011ab3fbf0 ffffffff813b542e
0000000000000000 ffffffffa0966496 ffff88011ab3fc28 ffffffff810a40f2
00000000000001fd 0000000000003000 ffff88014fc50000 0000000000000000
Call Trace:
[<
ffffffff813b542e>] dump_stack+0x63/0x85
[<
ffffffff810a40f2>] warn_slowpath_common+0x82/0xc0
[<
ffffffff810a423a>] warn_slowpath_null+0x1a/0x20
[<
ffffffffa09251cc>] __x86_set_memory_region+0x1dc/0x1f0 [kvm]
[<
ffffffffa092521b>] x86_set_memory_region+0x3b/0x60 [kvm]
[<
ffffffffa09bb61c>] vmx_set_tss_addr+0x3c/0x150 [kvm_intel]
[<
ffffffffa092f4d4>] kvm_arch_vm_ioctl+0x654/0xbc0 [kvm]
[<
ffffffffa091d31a>] kvm_vm_ioctl+0x9a/0x6f0 [kvm]
[<
ffffffff81241248>] do_vfs_ioctl+0x298/0x480
[<
ffffffff812414a9>] SyS_ioctl+0x79/0x90
[<
ffffffff817a04ee>] entry_SYSCALL_64_fastpath+0x12/0x71
Testcase:
#include <unistd.h>
#include <sys/ioctl.h>
#include <fcntl.h>
#include <string.h>
#include <linux/kvm.h>
long r[8];
int main()
{
memset(r, -1, sizeof(r));
r[2] = open("/dev/kvm", O_RDONLY|O_TRUNC);
r[3] = ioctl(r[2], KVM_CREATE_VM, 0x0ul);
r[5] = ioctl(r[3], KVM_SET_TSS_ADDR, 0x20000000ul);
r[7] = ioctl(r[3], KVM_SET_TSS_ADDR, 0x20000000ul);
return 0;
}
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Dmitry Bilunov [Tue, 31 May 2016 14:38:24 +0000 (17:38 +0300)]
KVM: Handle MSR_IA32_PERF_CTL
Intel CPUs having Turbo Boost feature implement an MSR to provide a
control interface via rdmsr/wrmsr instructions. One could detect the
presence of this feature by issuing one of these instructions and
handling the #GP exception which is generated in case the referenced MSR
is not implemented by the CPU.
KVM's vCPU model behaves exactly as a real CPU in this case by injecting
a fault when MSR_IA32_PERF_CTL is called (which KVM does not support).
However, some operating systems use this register during an early boot
stage in which their kernel is not capable of handling #GP correctly,
causing #DP and finally a triple fault effectively resetting the vCPU.
This patch implements a dummy handler for MSR_IA32_PERF_CTL to avoid the
crashes.
Signed-off-by: Dmitry Bilunov <kmeaw@yandex-team.ru>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Nadav Amit [Wed, 11 May 2016 15:04:29 +0000 (08:04 -0700)]
KVM: x86: avoid write-tearing of TDP
In theory, nothing prevents the compiler from write-tearing PTEs, or
split PTE writes. These partially-modified PTEs can be fetched by other
cores and cause mayhem. I have not really encountered such case in
real-life, but it does seem possible.
For example, the compiler may try to do something creative for
kvm_set_pte_rmapp() and perform multiple writes to the PTE.
Signed-off-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Radim Krčmář [Thu, 2 Jun 2016 15:28:04 +0000 (17:28 +0200)]
Merge tag 'kvm-arm-for-v4.7-rc2' of git://git./linux/kernel/git/kvmarm/kvmarm
KVM/ARM Fixes for v4.7-rc2
Fixes for the vgic, 2 of the patches address a bug introduced in v4.6
while the rest are for the new vgic.
Marc Zyngier [Thu, 2 Jun 2016 08:24:06 +0000 (09:24 +0100)]
KVM: arm/arm64: vgic-new: Removel harmful BUG_ON
When changing the active bit from an MMIO trap, we decide to
explode if the intid is that of a private interrupt.
This flawed logic comes from the fact that we were assuming that
kvm_vcpu_kick() as called by kvm_arm_halt_vcpu() would not return before
the called vcpu responded, but this is not the case, so we need to
perform this wait even for private interrupts.
Dropping the BUG_ON seems like the right thing to do.
[ Commit message tweaked by Christoffer ]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Linus Torvalds [Wed, 1 Jun 2016 19:38:50 +0000 (12:38 -0700)]
Merge tag 'pinctrl-v4.7-2' of git://git./linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Here are three pin control fixes for v4.7. Not much, and just driver
fixes:
- add device tree matches to MAINTAINERS
- inversion bug in the Nomadik driver
- dual edge handling bug in the mediatek driver"
* tag 'pinctrl-v4.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: mediatek: fix dual-edge code defect
MAINTAINERS: Add file patterns for pinctrl device tree bindings
pinctrl: nomadik: fix inversion of gpio direction
Linus Torvalds [Wed, 1 Jun 2016 19:32:25 +0000 (12:32 -0700)]
Merge tag 'dma-buf-for-4.7' of git://git./linux/kernel/git/sumits/dma-buf
Pull dma-buf updates from Sumit Semwal:
- use of vma_pages instead of explicit computation
- DocBook and headerdoc updates for dma-buf
* tag 'dma-buf-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sumits/dma-buf:
dma-buf: use vma_pages()
fence: add missing descriptions for fence
doc: update/fixup dma-buf related DocBook
reservation: add headerdoc comments
dma-buf: headerdoc fixes
Linus Torvalds [Wed, 1 Jun 2016 05:28:28 +0000 (22:28 -0700)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Fix negative error code usage in ATM layer, from Stefan Hajnoczi.
2) If CONFIG_SYSCTL is disabled, the default TTL is not initialized
properly. From Ezequiel Garcia.
3) Missing spinlock init in mvneta driver, from Gregory CLEMENT.
4) Missing unlocks in hwmb error paths, also from Gregory CLEMENT.
5) Fix deadlock on team->lock when propagating features, from Ivan
Vecera.
6) Work around buffer offset hw bug in alx chips, from Feng Tang.
7) Fix double listing of SCTP entries in sctp_diag dumps, from Xin
Long.
8) Various statistics bug fixes in mlx4 from Eric Dumazet.
9) Fix some randconfig build errors wrt fou ipv6 from Arnd Bergmann.
10) All of l2tp was namespace aware, but the ipv6 support code was not
doing so. From Shmulik Ladkani.
11) Handle on-stack hrtimers properly in pktgen, from Guenter Roeck.
12) Propagate MAC changes properly through VLAN devices, from Mike
Manning.
13) Fix memory leak in bnx2x_init_one(), from Vitaly Kuznetsov.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (62 commits)
sfc: Track RPS flow IDs per channel instead of per function
usbnet: smsc95xx: fix link detection for disabled autonegotiation
virtio_net: fix virtnet_open and virtnet_probe competing for try_fill_recv
bnx2x: avoid leaking memory on bnx2x_init_one() failures
fou: fix IPv6 Kconfig options
openvswitch: update checksum in {push,pop}_mpls
sctp: sctp_diag should dump sctp socket type
net: fec: update dirty_tx even if no skb
vlan: Propagate MAC address to VLANs
atm: iphase: off by one in rx_pkt()
atm: firestream: add more reserved strings
vxlan: Accept user specified MTU value when create new vxlan link
net: pktgen: Call destroy_hrtimer_on_stack()
timer: Export destroy_hrtimer_on_stack()
net: l2tp: Make l2tp_ip6 namespace aware
Documentation: ip-sysctl.txt: clarify secure_redirects
sfc: use flow dissector helpers for aRFS
ieee802154: fix logic error in ieee802154_llsec_parse_dev_addr
net: nps_enet: Disable interrupts before napi reschedule
net/lapb: tuse %*ph to dump buffers
...
Linus Torvalds [Wed, 1 Jun 2016 05:20:56 +0000 (22:20 -0700)]
Merge git://git./linux/kernel/git/davem/sparc
Pull sparc fixes from David Miller:
"sparc64 mmu context allocation and trap return bug fixes"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc64: Fix return from trap window fill crashes.
sparc: Harden signal return frame checks.
sparc64: Take ctx_alloc_lock properly in hugetlb_setup().
Jon Cooper [Tue, 31 May 2016 18:12:32 +0000 (19:12 +0100)]
sfc: Track RPS flow IDs per channel instead of per function
Otherwise we get confused when two flows on different channels get the
same flow ID.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christoph Fritz [Thu, 26 May 2016 02:06:47 +0000 (04:06 +0200)]
usbnet: smsc95xx: fix link detection for disabled autonegotiation
To detect link status up/down for connections where autonegotiation is
explicitly disabled, we don't get an irq but need to poll the status
register for link up/down detection.
This patch adds a workqueue to poll for link status.
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
wangyunjian [Tue, 31 May 2016 03:52:43 +0000 (11:52 +0800)]
virtio_net: fix virtnet_open and virtnet_probe competing for try_fill_recv
In function virtnet_open() and virtnet_probe(), func try_fill_recv() may
be executed at the same time. VQ in virtqueue_add() has not been protected
well and BUG_ON will be triggered when virito_net.ko being removed.
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vitaly Kuznetsov [Mon, 30 May 2016 13:00:54 +0000 (15:00 +0200)]
bnx2x: avoid leaking memory on bnx2x_init_one() failures
bnx2x_init_bp() allocates memory with bnx2x_alloc_mem_bp() so if we
fail later in bnx2x_init_one() we need to free this memory
with bnx2x_free_mem_bp() to avoid leakages. E.g. I'm observing memory
leaks reported by kmemleak when a failure (unrelated) happens in
bnx2x_vfpf_acquire().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Tue, 31 May 2016 20:42:11 +0000 (22:42 +0200)]
fou: fix IPv6 Kconfig options
The Kconfig options I added to work around broken compilation ended
up screwing up things more, as I used the wrong symbol to control
compilation of the file, resulting in IPv6 fou support to never be built
into the kernel.
Changing CONFIG_NET_FOU_IPV6_TUNNELS to CONFIG_IPV6_FOU fixes that
problem, I had renamed the symbol in one location but not the other,
and as the file is never being used by other kernel code, this did not
lead to a build failure that I would have caught.
After that fix, another issue with the same patch becomes obvious, as we
'select INET6_TUNNEL', which is related to IPV6_TUNNEL, but not the same,
and this can still cause the original build failure when IPV6_TUNNEL is
not built-in but IPV6_FOU is. The fix is equally trivial, we just need
to select the right symbol.
I have successfully build 350 randconfig kernels with this patch
and verified that the driver is now being built.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Valentin Rothberg <valentinrothberg@gmail.com>
Fixes:
fabb13db448e ("fou: add Kconfig options for IPv6 support")
Signed-off-by: David S. Miller <davem@davemloft.net>
Simon Horman [Mon, 30 May 2016 05:04:25 +0000 (14:04 +0900)]
openvswitch: update checksum in {push,pop}_mpls
In the case of CHECKSUM_COMPLETE the skb checksum should be updated in
{push,pop}_mpls() as they the type in the ethernet header.
As suggested by Pravin Shelar.
Cc: Pravin Shelar <pshelar@nicira.com>
Fixes:
25cd9ba0abc0 ("openvswitch: Add basic MPLS support to kernel")
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Sun, 29 May 2016 09:42:13 +0000 (17:42 +0800)]
sctp: sctp_diag should dump sctp socket type
Now we cannot distinguish that one sk is a udp or sctp style when
we use ss to dump sctp_info. it's necessary to dump it as well.
For sctp_diag, ss support is not officially available, thus there
are no official users of this yet, so we can add this field in the
middle of sctp_info without breaking user API.
v1->v2:
- move 'sctpi_s_type' field to the end of struct sctp_info, so
that it won't cause incompatibility with applications already
built.
- add __reserved3 in sctp_info to make sure sctp_info is 8-byte
alignment.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Troy Kisky [Fri, 27 May 2016 20:30:40 +0000 (13:30 -0700)]
net: fec: update dirty_tx even if no skb
If dirty_tx isn't updated, then dma_unmap_single
can be called twice.
This fixes a
[ 58.420980] ------------[ cut here ]------------
[ 58.425667] WARNING: CPU: 0 PID: 377 at /home/schurig/d/mkarm/linux-4.5/lib/dma-debug.c:1096 check_unmap+0x9d0/0xab8()
[ 58.436405] fec
2188000.ethernet: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x0000000000000000] [size=66 bytes]
encountered by Holger
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Tested-by: <holgerschurig@gmail.com>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mike Manning [Fri, 27 May 2016 16:45:07 +0000 (17:45 +0100)]
vlan: Propagate MAC address to VLANs
The MAC address of the physical interface is only copied to the VLAN
when it is first created, resulting in an inconsistency after MAC
address changes of only newly created VLANs having an up-to-date MAC.
The VLANs should continue inheriting the MAC address of the physical
interface until the VLAN MAC address is explicitly set to any value.
This allows IPv6 EUI64 addresses for the VLAN to reflect any changes
to the MAC of the physical interface and thus for DAD to behave as
expected.
Signed-off-by: Mike Manning <mmanning@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Fri, 27 May 2016 10:34:35 +0000 (13:34 +0300)]
atm: iphase: off by one in rx_pkt()
The iadev->rx_open[] array holds "iadev->num_vc" pointers (this code
assumes that pointers are 32 bits). So the > here should be >= or else
we could end up reading a garbage pointer from one element beyond the
end of the array.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Fri, 27 May 2016 10:33:50 +0000 (13:33 +0300)]
atm: firestream: add more reserved strings
This bug was there when the driver was first added in back in year 2000.
It causes a Smatch warning:
drivers/atm/firestream.c:849 process_incoming()
error: buffer overflow 'res_strings' 60 <= 63
There are supposed to be 64 entries in this array and the missing
strings are clearly in the 30 40 range. I added them as reserved 37 to
reserved 40. It's possible that strings are really supposed to be added
in the middle instead of at the end, but this approach is safe, in that
it fixes the bug and doesn't break anything that wasn't already broken.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Chen Haiquan [Fri, 27 May 2016 02:49:11 +0000 (10:49 +0800)]
vxlan: Accept user specified MTU value when create new vxlan link
When create a new vxlan link, example:
ip link add vtap mtu 1440 type vxlan vni 1 dev eth0
The argument "mtu" has no effect, because it is not set to conf->mtu. The
default value is used in vxlan_dev_configure function.
This problem was introduced by commit
0dfbdf4102b9 (vxlan: Factor out device
configuration).
Fixes:
0dfbdf4102b9 (vxlan: Factor out device configuration)
Signed-off-by: Chen Haiquan <oc@yunify.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guenter Roeck [Fri, 27 May 2016 00:21:06 +0000 (17:21 -0700)]
net: pktgen: Call destroy_hrtimer_on_stack()
If CONFIG_DEBUG_OBJECTS_TIMERS=y, hrtimer_init_on_stack() requires
a matching call to destroy_hrtimer_on_stack() to clean up timer
debug objects.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guenter Roeck [Fri, 27 May 2016 00:21:05 +0000 (17:21 -0700)]
timer: Export destroy_hrtimer_on_stack()
hrtimer_init_on_stack() needs a matching call to
destroy_hrtimer_on_stack(), so both need to be exported.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Muhammad Falak R Wani [Mon, 23 May 2016 11:38:42 +0000 (17:08 +0530)]
dma-buf: use vma_pages()
Replace explicit computation of vma page count by a call to
vma_pages().
Also, include <linux/mm.h>
Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Luis de Bethencourt [Mon, 11 Apr 2016 11:48:55 +0000 (12:48 +0100)]
fence: add missing descriptions for fence
The members child_list and active_list were added to the fence struct
without descriptions for the Documentation. Adding these.
Fixes:
b55b54b5db33 ("staging/android: remove struct sync_pt")
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Rob Clark [Thu, 31 Mar 2016 20:26:52 +0000 (16:26 -0400)]
doc: update/fixup dma-buf related DocBook
Split out dma-buf related parts into their own section, add missing
files, and write a bit of overview about how it all fits together.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Linus Torvalds [Tue, 31 May 2016 16:43:24 +0000 (09:43 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
"Three bugs fixes and an update for the default configuration"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: fix info leak in do_sigsegv
s390/config: update default configuration
s390/bpf: fix recache skb->data/hlen for skb_vlan_push/pop
s390/bpf: reduce maximum program size to 64 KB
Rob Clark [Thu, 31 Mar 2016 20:26:51 +0000 (16:26 -0400)]
reservation: add headerdoc comments
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Rob Clark [Thu, 31 Mar 2016 20:26:50 +0000 (16:26 -0400)]
dma-buf: headerdoc fixes
Apparently nobody noticed that dma-buf.h wasn't actually pulled into
docbook build. And as a result the headerdoc comments bitrot a bit.
Add missing params/fields.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Linus Torvalds [Tue, 31 May 2016 16:27:00 +0000 (09:27 -0700)]
Merge tag 'gpio-v4.7-2' of git://git./linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"A bunch of GPIO fixes for the v4.7 series:
- Drop the lock before reading out the GPIO direction setting in
drivers supporting the .get_direction() callback: some of them may
be slowpath.
- Flush GPIO direction setting before locking a GPIO as an IRQ: some
electronics or other poking around in the registers behind our back
may have happened, so flush the direction status before trying to
lock the line for use by IRQs.
- Bail out silently when asked to perform operations on NULL GPIO
descriptors. That is what all the get_*_optional() is about: we
get optional GPIO handles, if they are not there, we get NULL.
- Handle compatible ioctl() correctly: we need to convert the ioctl()
pointer using compat_ptr() here like everyone else.
- Disable the broken .to_irq() on the LPC32xx platform. The whole
irqchip infrastructure was replaced in the last merge window, and a
new implementation will be needed"
* tag 'gpio-v4.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: drop lock before reading GPIO direction
gpio: bail out silently on NULL descriptors
gpio: handle compatible ioctl() pointers
gpio: flush direction status in gpiochip_lock_as_irq()
gpio: lpc32xx: disable broken to_irq support
Marc Zyngier [Wed, 25 May 2016 14:26:39 +0000 (15:26 +0100)]
arm64: KVM: vgic-v3: Relax synchronization when SRE==1
The GICv3 backend of the vgic is quite barrier heavy, in order
to ensure synchronization of the system registers and the
memory mapped view for a potential GICv2 guest.
But when the guest is using a GICv3 model, there is absolutely
no need to execute all these heavy barriers, and it is actually
beneficial to avoid them altogether.
This patch makes the synchonization conditional, and ensures
that we do not change the EL1 SRE settings if we do not need to.
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Marc Zyngier [Wed, 25 May 2016 14:26:38 +0000 (15:26 +0100)]
arm64: KVM: vgic-v3: Prevent the guest from messing with ICC_SRE_EL1
Both our GIC emulations are "strict", in the sense that we either
emulate a GICv2 or a GICv3, and not a GICv3 with GICv2 legacy
support.
But when running on a GICv3 host, we still allow the guest to
tinker with the ICC_SRE_EL1 register during its time slice:
it can switch SRE off, observe that it is off, and yet on the
next world switch, find the SRE bit to be set again. Not very
nice.
An obvious solution is to always trap accesses to ICC_SRE_EL1
(by clearing ICC_SRE_EL2.Enable), and to let the handler return
the programmed value on a read, or ignore the write.
That way, the guest can always observe that our GICv3 is SRE==1
only.
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Marc Zyngier [Wed, 25 May 2016 14:26:37 +0000 (15:26 +0100)]
arm64: KVM: Make ICC_SRE_EL1 access return the configured SRE value
When we trap ICC_SRE_EL1, we handle it as RAZ/WI. It would be
more correct to actual make it RO, and return the configured
value when read.
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Marc Zyngier [Wed, 25 May 2016 14:26:36 +0000 (15:26 +0100)]
KVM: arm/arm64: vgic-v3: Always resample level interrupts
When reading back from the list registers, we need to perform
two actions for level interrupts:
1) clear the soft-pending bit if the interrupt is not pending
anymore *in the list register*
2) resample the line level and propagate it to the pending state
But these two actions shouldn't be linked, and we should *always*
resample the line level, no matter what state is in the list
register. Otherwise, we may end-up injecting spurious interrupts
that have been already retired.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Marc Zyngier [Wed, 25 May 2016 14:26:35 +0000 (15:26 +0100)]
KVM: arm/arm64: vgic-v2: Always resample level interrupts
When reading back from the list registers, we need to perform
two actions for level interrupts:
1) clear the soft-pending bit if the interrupt is not pending
anymore *in the list register*
2) resample the line level and propagate it to the pending state
But these two actions shouldn't be linked, and we should *always*
resample the line level, no matter what state is in the list
register. Otherwise, we may end-up injecting spurious interrupts
that have been already retired.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Christoffer Dall [Wed, 25 May 2016 14:26:34 +0000 (15:26 +0100)]
KVM: arm/arm64: vgic-v3: Clear all dirty LRs
When saving the state of the list registers, it is critical to
reset them zero, as we could otherwise leave unexpected EOI
interrupts pending for virtual level interrupts.
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Christoffer Dall [Wed, 25 May 2016 14:26:33 +0000 (15:26 +0100)]
KVM: arm/arm64: vgic-v2: Clear all dirty LRs
When saving the state of the list registers, it is critical to
reset them zero, as we could otherwise leave unexpected EOI
interrupts pending for virtual level interrupts.
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
hongkun.cao [Sat, 21 May 2016 07:23:39 +0000 (15:23 +0800)]
pinctrl: mediatek: fix dual-edge code defect
When a dual-edge irq is triggered, an incorrect irq will be reported on
condition that the external signal is not stable and this incorrect irq
has been registered.
Correct the register offset.
Cc: stable@vger.kernel.org
Signed-off-by: Hongkun Cao <hongkun.cao@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Linus Torvalds [Mon, 30 May 2016 22:27:07 +0000 (15:27 -0700)]
Merge branch 'uuid' (lib/uuid fixes from Andy)
Merge lib/uuid fixes from Andy Shevchenko.
* emailed patches from Andy Shevchenko <andriy.shevchenko@linux.intel.com>:
lib/uuid.c: use correct offset in uuid parser
lib/uuid: add a test module
Bjørn Mork [Mon, 30 May 2016 14:40:42 +0000 (17:40 +0300)]
lib/uuid.c: use correct offset in uuid parser
Use '+ 0' and '+ 1' as offsets, like they were intended, instead of
adding to the result.
Fixes:
2b1b0d66704a ("lib/uuid.c: introduce a few more generic helpers")
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andy Shevchenko [Mon, 30 May 2016 14:40:41 +0000 (17:40 +0300)]
lib/uuid: add a test module
It appears that somehow I missed a test of the latest UUID rework which
landed in the kernel. Present a small test module to avoid such cases
in the future.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 30 May 2016 22:20:18 +0000 (15:20 -0700)]
Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes the following issues:
- missing selection in public_key that may result in a build failure
- Potential crash in error path in omap-sham
- ccp AES XTS bug that affects requests larger than 4096"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: ccp - Fix AES XTS error for request sizes above 4096
crypto: public_key: select CRYPTO_AKCIPHER
crypto: omap-sham - potential Oops on error in probe
Linus Walleij [Mon, 30 May 2016 15:11:59 +0000 (17:11 +0200)]
gpio: drop lock before reading GPIO direction
When adding the gpiochip, the GPIO HW drivers' callback get_direction()
could get called in atomic context. Some of the GPIO HW drivers may
sleep when accessing the register.
Move the lock before initializing the descriptors.
Reported-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Linus Walleij [Mon, 30 May 2016 14:48:39 +0000 (16:48 +0200)]
gpio: bail out silently on NULL descriptors
In
fdeb8e1547cb9dd39d5d7223b33f3565cf86c28e
("gpio: reflect base and ngpio into gpio_device")
assumed that GPIO descriptors are either valid or error
pointers, but gpiod_get_[index_]optional() actually return
NULL descriptors and then all subsequent calls should just
bail out.
Cc: stable@vger.kernel.org
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Fixes:
fdeb8e1547cb ("gpio: reflect base and ngpio into gpio_device")
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Linus Walleij [Fri, 27 May 2016 12:24:04 +0000 (14:24 +0200)]
gpio: handle compatible ioctl() pointers
If we're using the compatible ioctl() we need to handle the
argument pointer in a special way or there will be trouble.
Fixes:
3c702e9987e2 ("gpio: add a userspace chardev ABI for GPIOs")
Reported-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Geert Uytterhoeven [Sun, 22 May 2016 09:06:13 +0000 (11:06 +0200)]
MAINTAINERS: Add file patterns for pinctrl device tree bindings
Submitters of device tree binding documentation may forget to CC
the subsystem maintainer if this is missing.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Linus Walleij [Tue, 24 May 2016 12:39:47 +0000 (14:39 +0200)]
pinctrl: nomadik: fix inversion of gpio direction
The input/output directions were inversed on the GPIO direction
read function. Loose a ! and it is correct.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Linus Walleij [Wed, 25 May 2016 08:56:03 +0000 (10:56 +0200)]
gpio: flush direction status in gpiochip_lock_as_irq()
As irqchip and gpiochip functions are orthogonal, the IRQ
set-up or something else can have changed the direction of
the GPIO line from what the GPIO descriptor knows when we
get into gpiochip_lock_as_irq(). Make sure to re-read the
direction setting if we have the .get_direction() callback
enabled for the chip.
Else we get problems like this:
iio iio:device2: interrupts on the rising edge
gpio gpiochip2: (
8012e080.gpio): gpiochip_lock_as_irq:
tried to flag a GPIO set as output for IRQ
gpio gpiochip2: (
8012e080.gpio): unable to lock HW IRQ 0 for IRQ
genirq: Failed to request resources for l3g4200d-trigger
(irq 111) on irqchip nmk1-32-63
iio iio:device2: failed to request trigger IRQ.
st-gyro-i2c: probe of 2-0068 failed with error -22
Fixes:
72d320006177 ("gpio: set up initial state from .get_direction()")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Sylvain Lemieux [Wed, 11 May 2016 17:40:00 +0000 (13:40 -0400)]
gpio: lpc32xx: disable broken to_irq support
The "to_irq" functionality is broken inside this driver since commit
76ba59f8366f ("genirq: Add irq_domain-aware core IRQ handler").
The addition of the new lpc32xx irqchip driver in 4.7, fixed the
lpc32xx platform interrupt issue.
When switching to the new lpc32xx irqchip driver, a warning appear
in the lpc32xx gpio driver: warning: "NR_IRQS" redefined.
To remove this warning (temporary solution), this patch
disables the broken "to_irq" mapping functionality support.
Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Shmulik Ladkani [Thu, 26 May 2016 17:16:36 +0000 (20:16 +0300)]
net: l2tp: Make l2tp_ip6 namespace aware
l2tp_ip6 tunnel and session lookups were still using init_net, although
the l2tp core infrastructure already supports lookups keyed by 'net'.
As a result, l2tp_ip6_recv discarded packets for tunnels/sessions
created in namespaces other than the init_net.
Fix, by using dev_net(skb->dev) or sock_net(sk) where appropriate.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Garver [Thu, 26 May 2016 16:28:05 +0000 (12:28 -0400)]
Documentation: ip-sysctl.txt: clarify secure_redirects
Clarify how secure_redirects works. Mention that RFC1122 always applies.
Signed-off-by: Eric Garver <e@erig.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
Edward Cree [Thu, 26 May 2016 20:46:05 +0000 (21:46 +0100)]
sfc: use flow dissector helpers for aRFS
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Baozeng Ding [Thu, 26 May 2016 13:07:42 +0000 (21:07 +0800)]
ieee802154: fix logic error in ieee802154_llsec_parse_dev_addr
Fix a logic error to avoid potential null pointer dereference.
Signed-off-by: Baozeng Ding <sploving1@gmail.com>
Reviewed-by: Stefan Schmidt<stefan@osg.samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Elad Kanfi [Thu, 26 May 2016 12:00:06 +0000 (15:00 +0300)]
net: nps_enet: Disable interrupts before napi reschedule
Since NAPI works by shutting down event interrupts when theres
work and turning them on when theres none, the net driver must
make sure that interrupts are disabled when it reschedules polling.
By calling napi_reschedule, the driver switches to polling mode,
therefor there should be no interrupt interference.
Any received packets will be handled in nps_enet_poll by polling the HW
indication of received packet until all packets are handled.
Signed-off-by: Elad Kanfi <eladkan@mellanox.com>
Acked-by: Noam Camus <noamca@mellanox.com>
Tested-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andy Shevchenko [Thu, 26 May 2016 11:43:52 +0000 (14:43 +0300)]
net/lapb: tuse %*ph to dump buffers
Use %*ph specifier to dump small buffers in hex format instead doing this
byte-by-byte.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Thu, 26 May 2016 06:46:22 +0000 (09:46 +0300)]
ptp: oops in ptp_ioctl()
If we pass ERR_PTR(-EFAULT) to kfree() then it's going to oops.
Fixes:
2ece068e1b1d ('ptp: use memdup_user().')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>