OSDN Git Service
Chenjie Luo [Wed, 20 Jan 2016 21:10:20 +0000 (21:10 +0000)]
Merge "DO NOT MERGE ANYWHERE Disconnect the AVDT connection for A2DP SRC device." into cw-e-dev
am:
5084f0166e -s ours
* commit '
5084f0166ee0ee20608413a79c88332275b61943':
DO NOT MERGE ANYWHERE Disconnect the AVDT connection for A2DP SRC device.
Chenjie Luo [Wed, 20 Jan 2016 21:04:30 +0000 (21:04 +0000)]
Merge "DO NOT MERGE ANYWHERE Disconnect the AVDT connection for A2DP SRC device." into cw-e-dev
WANG XING [Wed, 20 Jan 2016 09:20:39 +0000 (17:20 +0800)]
DO NOT MERGE ANYWHERE Disconnect the AVDT connection for A2DP SRC device.
If phone send A2DP connection request to device, the
device will start 2 seconds timer loop to check the
connection status of A2DP, bluetooth wake
lock will not be released. If the remote device is A2DP
source device, disconnect the AVDT connection.
BUG=
26274393
Change-Id: I3a419e9e3dd613f20c973638b166d2a6012c45f7
Signed-off-by: m00182044 <m00182044@notesmail.huawei.com>
Sharvil Nanavati [Wed, 20 Jan 2016 04:31:38 +0000 (04:31 +0000)]
DO NOT MERGE ANYWHERE
am:
95f816945a -s ours
* commit '
95f816945a174f890b960330445087c3409f3327':
DO NOT MERGE ANYWHERE
Sharvil Nanavati [Fri, 15 Jan 2016 21:41:56 +0000 (13:41 -0800)]
DO NOT MERGE ANYWHERE
Update btsnooz log file format to log ACL and SCO headers.
Change-Id: I72db1769197150f34ebba6fcb9c0e3db2404f342
Devin Kim [Fri, 15 Jan 2016 18:05:14 +0000 (18:05 +0000)]
Do not send AT+CHLD=? if the 3-way call feature is not supported
am:
79dc36d01a
* commit '
79dc36d01aaab9a29cd70a0ff40463102505da4b':
Do not send AT+CHLD=? if the 3-way call feature is not supported
Devin Kim [Thu, 14 Jan 2016 01:37:57 +0000 (10:37 +0900)]
Do not send AT+CHLD=? if the 3-way call feature is not supported
The HF shall not issue the AT+CHLD=? test command in case
either the HF or the AG does not support the Three-way calling feature.
Currently HF sends AT+CHLD=? to AG device when SLC sequence on going.
It affects to SCO statemachine so that after going out of range and
coming back in range while active call alives, SCO state goes bad and
never comes back. This is out of specification of HFP and it should be
fixed by checking peer and local 3way call capability check.
Bug:
25703926
Change-Id: I66adac2345c6fb0df6741fdbfa67d9483fc38a00
Sathya Kumar [Fri, 15 Jan 2016 01:45:17 +0000 (01:45 +0000)]
DO NOT MERGE ANYWHERE Disable 3Mbps packets for AVDT ACL links
am:
a8bb3ae08b -s ours
* commit '
a8bb3ae08b6696e7931c903bf11f54b743d37acf':
DO NOT MERGE ANYWHERE Disable 3Mbps packets for AVDT ACL links
Sathya Kumar [Thu, 7 Jan 2016 16:04:56 +0000 (10:04 -0600)]
DO NOT MERGE ANYWHERE Disable 3Mbps packets for AVDT ACL links
BUG=
25909971 Xtreme music playback stuttering
Change-Id: I49a2daeb169e7e346d6eb1ede38e6aeb72ed7639
Sharvil Nanavati [Thu, 14 Jan 2016 19:59:33 +0000 (11:59 -0800)]
resolve merge conflicts of
7408acb7be to mnc-dr1.5-dev.
Change-Id: I5f00746e95c703da91838395aa0c85a660cef2b1
Sharvil Nanavati [Thu, 14 Jan 2016 18:23:08 +0000 (18:23 +0000)]
Merge "Per Motorola, we're going to revert this change and submit Moto-specific code for this." into cw-e-dev
Pankaj Kanwar [Wed, 13 Jan 2016 22:33:01 +0000 (22:33 +0000)]
Merge "Offload config save functionality to BTIF thread" into mnc-dr1.5-dev
Sharvil Nanavati [Wed, 13 Jan 2016 18:13:39 +0000 (18:13 +0000)]
Per Motorola, we're going to revert this change and submit Moto-specific code for this.
Revert "Disable 3Mbps packets for AVDT ACL links"
This reverts commit
26bb30842b6c64821c2a6c4a515f290140017105.
Change-Id: Iced6b38189b3ef27a6b520bd0af6dd0960e2eb16
Srinu Jella [Thu, 24 Dec 2015 12:10:52 +0000 (17:40 +0530)]
Offload config save functionality to BTIF thread
Offload config save functionality to btif thread from
timer thread as timer callback thread is critical in
a2dp playback case.
If the timer callback thread is busy in config save due
to IO operations, it may lead to a2dp audio choppy.
Fix to avoid the "bt_config.conf" file corruption from
the file system. This will avoid losing the paired
information in some corner case, such as abrupt power
off and on. This patch will ensure bt_config is saved to
NVRAM.
Bug:
24875861
CRs-Fixed: 953993
Change-Id: I893e9afefa89cbab6e7ddd8835ca77d3e316874c
Andre Eisenbach [Tue, 12 Jan 2016 19:30:55 +0000 (19:30 +0000)]
Merge "Additional headsets blacklisted for absolute volume" into mnc-dr1.5-dev
Marie Janssen [Tue, 12 Jan 2016 18:56:56 +0000 (18:56 +0000)]
Fix crashes with lots of discovered LE devices am:
05419c8b96 am:
7a5fa57019
am:
0ff343e006
* commit '
0ff343e0067c77341a86b0cd4491081cb66657cd':
Fix crashes with lots of discovered LE devices
Marie Janssen [Tue, 12 Jan 2016 18:53:06 +0000 (18:53 +0000)]
Fix crashes with lots of discovered LE devices am:
05419c8b96
am:
7a5fa57019
* commit '
7a5fa57019c1a0b175adeaa76f7548f6c4a9df6f':
Fix crashes with lots of discovered LE devices
Marie Janssen [Tue, 12 Jan 2016 18:47:46 +0000 (18:47 +0000)]
Fix crashes with lots of discovered LE devices
am:
05419c8b96
* commit '
05419c8b96ff9cf61c257aec6ae0aeabcfcc2636':
Fix crashes with lots of discovered LE devices
Andre Eisenbach [Tue, 12 Jan 2016 02:06:44 +0000 (18:06 -0800)]
Additional headsets blacklisted for absolute volume
Bug:
26070064
Change-Id: Ida1faec964982a4630f42ab378fe5b6dd6e21c16
Sharvil Nanavati [Fri, 8 Jan 2016 02:40:35 +0000 (18:40 -0800)]
resolve merge conflicts of
26bb30842b to mnc-dr1.5-dev.
Change-Id: I52d08551a1d62fbd56bc6b14d98ccbc31f294484
Sathya Kumar [Thu, 7 Jan 2016 23:26:05 +0000 (17:26 -0600)]
Disable 3Mbps packets for AVDT ACL links
Change-Id: I4b1b52ec8aeaf5eab0672231889e0ea6f23aa852
Ajay Panicker [Wed, 6 Jan 2016 20:11:05 +0000 (12:11 -0800)]
A2DP task media alarm non-null protection
Prevent the alarm from being started multiple times.
Bug:
26277592
Change-Id: I764f93bab5490bf5f3942a1beb706457197d3ec1
Sharvil Nanavati [Wed, 6 Jan 2016 17:28:51 +0000 (17:28 +0000)]
Fix bug where a bonded device could enter BONDING and BONDED states again.
am:
b32b3d7c1b
* commit '
b32b3d7c1b99adb760cc7013a545af2140e34dcc':
Fix bug where a bonded device could enter BONDING and BONDED states again.
Sharvil Nanavati [Wed, 6 Jan 2016 00:23:02 +0000 (16:23 -0800)]
Fix bug where a bonded device could enter BONDING and BONDED states again.
The following sequence of events was observed:
- start bonding with device A
- bond state for A goes from 10 -> 11 -> 12
- everyone's happy
- start bonding with device B
- bond state for B goes from 10 -> 11
- bond state for A goes from 12 -> 11 -> 12
The bond state for A should not have been changed in the last step
since it was not participating in any bonding procedure at the time.
The above sequence can be reproduced if a device D bonds with
A and takes on the slave role and then D bonds with B and switches
to a master role. When D performs the role switch, it receives an
updated link key from A.
Since the link key update procedure is tied in with the pairing flow,
we see spurious bond state changes. This CL checks the pairing control
block to see if D is, in fact, pairing with A and if not, it skips the
bond state updates.
Bug:
25870383
Change-Id: Ic6ff548dbe4e960c965bdc9ef5c50a263b9b3b22
Sharvil Nanavati [Tue, 5 Jan 2016 01:37:57 +0000 (01:37 +0000)]
Merge "Fix crash in HFP client\'s +COPS parsing code." into cw-e-dev
am:
bf8d17ddbb
* commit '
bf8d17ddbb64fdc6c252c63f6b9078987f871ba6':
Fix crash in HFP client's +COPS parsing code.
Sharvil Nanavati [Tue, 5 Jan 2016 01:37:53 +0000 (01:37 +0000)]
Only send first 16 characters of operator name in +COPS.
am:
61b8ebf698
* commit '
61b8ebf698c87a3beb2ebb18ee633b121a78e29e':
Only send first 16 characters of operator name in +COPS.
Sharvil Nanavati [Tue, 5 Jan 2016 01:36:43 +0000 (01:36 +0000)]
Merge "Fix crash in HFP client's +COPS parsing code." into cw-e-dev
Sharvil Nanavati [Tue, 5 Jan 2016 01:21:05 +0000 (17:21 -0800)]
Fix crash in HFP client's +COPS parsing code.
If the Audio Gateway sends a malformed +COPS message (an operator
name > 16 characters) then the %n in sscanf format specifier is
ignored and sscanf will not assign a value to the appropriate
argument.
In such a case, the existing code will perform pointer arithmetic
using an uninitialized stack variable as an offset which may result
in pointing to an invalid memory address. When that memory is
subsequently dereferenced, we observe a crash.
This change ensures that the stack does not crash even if an invalid
+COPS message is sent from the Audio Gateway.
Bug:
24871011
Change-Id: I9bb42c75bcd90487831fc6950c571c87098559e7
Sharvil Nanavati [Tue, 5 Jan 2016 01:15:18 +0000 (17:15 -0800)]
Only send first 16 characters of operator name in +COPS.
According to the HFP spec, the operator name is required to be at
most 16 characters long.
Bug:
24871011
Change-Id: I9987de57a327348fc2203b9502e9df446a87793f
Marie Janssen [Wed, 9 Dec 2015 18:08:25 +0000 (10:08 -0800)]
Fix crashes with lots of discovered LE devices
When loads of devices are discovered a config file which is too large
can be written out, which causes the BT daemon to crash on startup.
This limits the number of config entries for unpaired devices which
are initialized, and prevents a large number from being saved to the
filesystem.
Bug:
26071376
Change-Id: I4a74094f57a82b17f94e99a819974b8bc8082184
(cherry picked from commit
d77f1999ecece56c1cbb333f4ddc26f0b5bac2c5)
Marie Janssen [Wed, 9 Dec 2015 18:08:25 +0000 (10:08 -0800)]
Fix crashes with lots of discovered LE devices
When loads of devices are discovered a config file which is too large
can be written out, which causes the BT daemon to crash on startup.
This limits the number of config entries for unpaired devices which
are initialized, and prevents a large number from being saved to the
filesystem.
Bug:
26071376
Change-Id: I4a74094f57a82b17f94e99a819974b8bc8082184
(cherry picked from commit
d77f1999ecece56c1cbb333f4ddc26f0b5bac2c5)
Andre Eisenbach [Fri, 11 Dec 2015 20:32:21 +0000 (12:32 -0800)]
DO NOT MERGE Blacklist devices for absolute volume control
Some devices do not play well with absolute volume control. They either
play back music at unacceptably loud volume levels or provide
insufficiently granular volume control where a single "step" of volume
change results in unexpectedly large jumps in volume.
Now with 100% less build errors ;)
Bug:
26070064,
26060431
Change-Id: Ibe46c4997bc1ca9e6f78cafb3b434309d8511fcb
Ian Pedowitz [Wed, 23 Dec 2015 05:13:22 +0000 (05:13 +0000)]
Revert "Blacklist devices for absolute volume control"
This reverts commit
2c8897ca35a93148619d662df03bd9da1b73679a.
Change-Id: Ia184c82fda022b3592753872a86be12a1cefc7d0
Andre Eisenbach [Fri, 11 Dec 2015 20:32:21 +0000 (12:32 -0800)]
Blacklist devices for absolute volume control
Some devices do not play well with absolute volume control. They either
play back music at unacceptably loud volume levels or provide
insufficiently granular volume control where a single "step" of volume
change results in unexpectedly large jumps in volume.
Bug:
26070064,
26060431
Change-Id: I5a336fba87119325b47a5ad385e9c48a631f2121
Sharvil Nanavati [Fri, 18 Dec 2015 18:37:06 +0000 (18:37 +0000)]
Merge "Fix absolute volume reporting if AVRC_ADV_CTRL_INCLUDED is false" into cw-e-dev
am:
3c8de06896
* commit '
3c8de068964457fbc7625ca5d8d6fbe85e416c40':
Fix absolute volume reporting if AVRC_ADV_CTRL_INCLUDED is false
Sharvil Nanavati [Fri, 18 Dec 2015 01:58:36 +0000 (01:58 +0000)]
Merge "Fix absolute volume reporting if AVRC_ADV_CTRL_INCLUDED is false" into cw-e-dev
Scott James Remnant [Thu, 17 Dec 2015 23:09:59 +0000 (23:09 +0000)]
DO NOT MERGE ANYWHERE net_test_bluetooth: replace with gtest variant
am:
786a7e5941 -s ours
* commit '
786a7e5941b7826a3b19d042aaba2763a103284e':
DO NOT MERGE ANYWHERE net_test_bluetooth: replace with gtest variant
Scott James Remnant [Wed, 11 Nov 2015 19:51:20 +0000 (11:51 -0800)]
DO NOT MERGE ANYWHERE net_test_bluetooth: replace with gtest variant
Bug:
25385380
Change-Id: Ia719363823d8d538caa6b42f076d5d6d737ae036
Joshua Schwarz [Thu, 17 Dec 2015 22:50:16 +0000 (14:50 -0800)]
Merge "DO NOT MERGE ANYWHERE Rename gtest_net_test_bluedroid to gtest_net_test_bluetooth." into cw-e-dev
am:
78ec0dc441 -s ours
* commit '
78ec0dc4419004fc4851850ba3c289e9eb4592c3':
DO NOT MERGE ANYWHERE Rename gtest_net_test_bluedroid to gtest_net_test_bluetooth.
Joshua Schwarz [Thu, 17 Dec 2015 22:47:38 +0000 (22:47 +0000)]
Merge "DO NOT MERGE ANYWHERE Rename gtest_net_test_bluedroid to gtest_net_test_bluetooth." into cw-e-dev
Sharvil Nanavati [Thu, 17 Dec 2015 14:23:19 +0000 (06:23 -0800)]
Fix absolute volume reporting if AVRC_ADV_CTRL_INCLUDED is false
Without this change, setting AVRC_ADV_CTRL_INCLUDED to false would
result in the native code reporting the remote device supports
absolute volume even though we don't.
Bug:
26070064
Change-Id: I5b88fa0adb89983de28a216898a1d8957fa454a1
Devin Kim [Wed, 16 Dec 2015 00:11:09 +0000 (00:11 +0000)]
Fix BT connection failures
am:
198abcd704
* commit '
198abcd7048fc98d78a7b264dcaa1923fe968614':
Fix BT connection failures
Devin Kim [Thu, 3 Dec 2015 21:19:20 +0000 (13:19 -0800)]
Fix BT connection failures
When HFP connection failed establishing between phone and watch, it can't
recover RFCOMM status which causes that HFP connection will not be made
unless BT radio goes off and comes back on. RFCOMM and HFP both trying to
open RFCOMM control channel at nearly same time, at some point, there's
a possibility that SABM packet didn't reach out to BT controller to connect
to phone from watch with HFP while phone tries to connect to watch with
AW RFCOMM.
This will take care of pending SABM packet to reach out to controller
properly so that RFCOMM status will not be messed.
Bug:
24285000
Bug:
25579482
Bug:
25579423
Bug:
25578997
Change-Id: Icc26b86c644ebd8d1c12a2fb4e94d04ba16cc2dd
Alain Vongsouvanh [Wed, 9 Dec 2015 23:39:55 +0000 (15:39 -0800)]
DO NOT MERGE ANYWHERE: osi: Remove error_fclose goto and redundant fflush.
am:
e52633cecf -s ours
* commit '
e52633cecfe6358ba2e7f38bd52339330505a02b':
DO NOT MERGE ANYWHERE: osi: Remove error_fclose goto and redundant fflush.
Alain Vongsouvanh [Wed, 9 Dec 2015 16:57:38 +0000 (08:57 -0800)]
DO NOT MERGE ANYWHERE: osi: Remove error_fclose goto and redundant fflush.
Change-Id: I327f9ce696bb68eb3b89b4a8b15dba189e027970
Amadeusz Slawinski [Tue, 8 Dec 2015 19:05:39 +0000 (11:05 -0800)]
DO NOT MERGE ANYWHERE: Add file write error checks to config_save
am:
02f35e6a36 -s ours
* commit '
02f35e6a3633f81cbcf0f3be4e68b79b496fb354':
DO NOT MERGE ANYWHERE: Add file write error checks to config_save
Amadeusz Slawinski [Tue, 3 Nov 2015 15:09:57 +0000 (16:09 +0100)]
DO NOT MERGE ANYWHERE: Add file write error checks to config_save
It's better to leave old config file instead of
overwriting with broken one.
Fixes problem when disk is full and we can't write
more data to it.
(Change amended to use "old" style LOG_ERROR macro)
Issue: KIONE-3099
Change-Id: Ifdb641ba7f3140655f9ec371e53b11a17484f27a
Joshua Schwarz [Mon, 30 Nov 2015 16:44:26 +0000 (08:44 -0800)]
DO NOT MERGE ANYWHERE Rename gtest_net_test_bluedroid to gtest_net_test_bluetooth.
Change-Id: I73105164c04701aade27638ffdc5c3281a2585a2
Chris Elliott [Wed, 2 Dec 2015 21:52:14 +0000 (21:52 +0000)]
Merge "DO NOT MERGE Revert "A2DP SRC offload support"" into mnc-dr1.5-dev
Chris Elliott [Wed, 2 Dec 2015 20:59:58 +0000 (12:59 -0800)]
DO NOT MERGE Revert "A2DP SRC offload support"
This reverts commit
6ff83ab9dd38bdefc5d252325f0cfbd3f1754d78.
Chris Elliott [Wed, 2 Dec 2015 20:56:55 +0000 (12:56 -0800)]
DO NOT MERGE Revert "Make default SBC bitrate configurable by device."
This reverts commit
5f308397b7fe8a8da3f88b0f8910c3863ed1ec0b.
Chris Elliott [Wed, 2 Dec 2015 20:55:59 +0000 (12:55 -0800)]
DO NOT MERGE Revert "Always send a SUSPEND_CFM event when suspended due to A2DP RECONFIGURE."
This reverts commit
8b1c7af03a2a8eedd1efd2eddca3ecd4b61bfd95.
Zach Johnson [Wed, 2 Dec 2015 18:24:58 +0000 (18:24 +0000)]
Merge "Mark secure link as authenticated for LE" into cw-e-dev
am:
e6242fcf30
* commit '
e6242fcf303f195d31eaaca97146e341b2b49e70':
Mark secure link as authenticated for LE
Zach Johnson [Wed, 2 Dec 2015 18:20:03 +0000 (18:20 +0000)]
Merge "Mark secure link as authenticated for LE" into cw-e-dev
Andre Eisenbach [Sat, 14 Nov 2015 00:48:53 +0000 (16:48 -0800)]
Mark secure link as authenticated for LE
Without this change, reading an authenticated GATT characteristic using
BR/EDR would fail with an insufficient authentication error.
Change-Id: I02f44cdf90635b470b21e8aad8240993cb0e8e42
Sridhar Vashist [Tue, 1 Dec 2015 21:27:00 +0000 (21:27 +0000)]
Always send a SUSPEND_CFM event when suspended due to A2DP RECONFIGURE.
am:
8b1c7af03a
* commit '
8b1c7af03a2a8eedd1efd2eddca3ecd4b61bfd95':
Always send a SUSPEND_CFM event when suspended due to A2DP RECONFIGURE.
Sridhar Vashist [Tue, 1 Dec 2015 21:26:57 +0000 (21:26 +0000)]
Make default SBC bitrate configurable by device.
am:
5f308397b7
* commit '
5f308397b7fe8a8da3f88b0f8910c3863ed1ec0b':
Make default SBC bitrate configurable by device.
Sridhar Vashist [Fri, 7 Aug 2015 00:40:24 +0000 (19:40 -0500)]
Always send a SUSPEND_CFM event when suspended due to A2DP RECONFIGURE.
There appear to be race cases where the peer sends a START before
we reconfigure the stream. Avoid btif_av state from getting
mismatched by always sending out the SUSPEND_CFM during RECONFIGURE.
Change-Id: I2034cd111466f792233cedb60a3a0df11d055962
Signed-off-by: Sridhar Vashist <svashist@motorola.com>
Sridhar Vashist [Wed, 14 Oct 2015 22:47:02 +0000 (17:47 -0500)]
Make default SBC bitrate configurable by device.
Configurable default SBC bitrate so that audio quality can be maintained
for sampling rates other than 44.1kHz
Change-Id: Ia4197c0a500088cfa48a8ba821e9738a16c3fc6e
Signed-off-by: Sridhar Vashist <svashist@motorola.com>
Chris Elliott [Tue, 1 Dec 2015 21:15:38 +0000 (21:15 +0000)]
Merge "A2DP SRC offload support" into cw-e-dev
am:
ffdfe1d26d
* commit '
ffdfe1d26d43a2f80a845be84b669520edc55fbb':
A2DP SRC offload support
Chris Elliott [Tue, 1 Dec 2015 21:09:52 +0000 (21:09 +0000)]
Merge "A2DP SRC offload support" into cw-e-dev
Abhijit Adsule [Tue, 19 May 2015 07:44:26 +0000 (02:44 -0500)]
A2DP SRC offload support
bluedroid changes to support A2DP SRC offload to BT FW.
add functionality to relay a2dp offload requests and responses
between AudioHAL & the BT vendor library.
Change-Id: Ie4e5992c48e95b0efb372a405e8537e4fd3ea071
Signed-off-by: Sridhar Vashist <svashist@motorola.com>
Conflicts:
audio_a2dp_hw/audio_a2dp_hw.h
bta/Android.mk
bta/av/bta_av_aact.c
btif/include/btif_media.h
btif/src/btif_av.c
btif/src/btif_media_task.c
hci/Android.mk
hci/src/vendor.c
include/bt_target.h
stack/include/l2c_api.h
Chenjie Luo [Mon, 30 Nov 2015 21:27:10 +0000 (21:27 +0000)]
Only initiate codec negotiation if feature is supported
am:
ecb3b8386f
* commit '
ecb3b8386f4acf6a6e9b401fdd561349ccd6c435':
Only initiate codec negotiation if feature is supported
Chenjie Luo [Fri, 20 Nov 2015 19:18:42 +0000 (11:18 -0800)]
Only initiate codec negotiation if feature is supported
Bug:
25634250
Change-Id: I97330c853f6cf90673b4ff28c72645f9d1c8ff9d
Baligh Uddin [Sun, 15 Nov 2015 17:27:19 +0000 (09:27 -0800)]
keep history after reset to mnc-dr-dev(
03d171170c7ad4e40454a9575cfd4919d2e1ef2f)
Sharvil Nanavati [Mon, 9 Nov 2015 17:11:12 +0000 (17:11 +0000)]
Merge "Fix broken test caused by misordered callback arguments." into cw-e-dev
Sharvil Nanavati [Sat, 7 Nov 2015 10:12:16 +0000 (02:12 -0800)]
Fix broken test caused by misordered callback arguments.
Change-Id: I16976a2a680eab76af31090548c2efc53bebaa60
Andre Eisenbach [Fri, 6 Nov 2015 00:59:44 +0000 (00:59 +0000)]
Always update remote address type during LE scan
am:
03d171170c
* commit '
03d171170c7ad4e40454a9575cfd4919d2e1ef2f':
Always update remote address type during LE scan
Andre Eisenbach [Thu, 5 Nov 2015 23:38:36 +0000 (15:38 -0800)]
Always update remote address type during LE scan
This will ensure that devices which do not contain a device name in the
advertising record are stored with the correct address type to ensure
re-connection to the device succeeds.
Bug:
25499163
Change-Id: I85f18ce2de267844c5d5ed49beeb448b9b074d74
Andre Eisenbach [Thu, 5 Nov 2015 01:27:19 +0000 (01:27 +0000)]
Merge "Do not mask out secure connections (SC) bit for BT <4.2" into mnc-dr-dev
am:
15c1f685db
* commit '
15c1f685db0453a3e20f81de94fca7040a52a39a':
Do not mask out secure connections (SC) bit for BT <4.2
Andre Eisenbach [Thu, 5 Nov 2015 01:27:14 +0000 (01:27 +0000)]
Fix bug in SDP 128-bit UUID lookup
am:
7312c6d913
* commit '
7312c6d91376e533914eb2a108b65699ca54353a':
Fix bug in SDP 128-bit UUID lookup
Andre Eisenbach [Wed, 4 Nov 2015 17:32:48 +0000 (17:32 +0000)]
Merge "Do not mask out secure connections (SC) bit for BT <4.2" into mnc-dr-dev
Andre Eisenbach [Wed, 4 Nov 2015 16:28:30 +0000 (08:28 -0800)]
Fix bug in SDP 128-bit UUID lookup
Bug:
24344122
Change-Id: I7b7ed4459c4f377d97b608bfe2e0c13aac31680e
Andre Eisenbach [Wed, 4 Nov 2015 16:20:22 +0000 (08:20 -0800)]
Do not mask out secure connections (SC) bit for BT <4.2
Bug:
25467621
Change-Id: Ifdb52295fa5b8c5a39524a722dc044227c735240
Andre Eisenbach [Fri, 30 Oct 2015 02:18:32 +0000 (02:18 +0000)]
Serialize remote version query over LE
am:
864e7734f2
* commit '
864e7734f21d7ebe3f3a6840d187a2696498e9f4':
Serialize remote version query over LE
Andre Eisenbach [Thu, 29 Oct 2015 22:48:06 +0000 (15:48 -0700)]
Serialize remote version query over LE
Some devices (ex. Nexus Player remote) do not take well to having the
remote version queried while a remote feature request is also sent and
subsequently fail encryption.
This patch serializes the query of the remote version and requires both
remote features and the remote version to be read before calling a
connection established.
Bug:
25357767
Change-Id: Ie70eea241b47b81778d8e0df47f3a8f376316932
Andre Eisenbach [Tue, 27 Oct 2015 20:30:54 +0000 (20:30 +0000)]
Check remote LMP version before enabling secure connections
am:
4f7c4f6732
* commit '
4f7c4f67320bbb35c85b478d2ac7aa29d732acca':
Check remote LMP version before enabling secure connections
Andre Eisenbach [Mon, 26 Oct 2015 20:49:17 +0000 (13:49 -0700)]
Check remote LMP version before enabling secure connections
Request remote version information for LE links when connecting and
ensure LMP version is >= 8 (Bluetooth 4.2) before setting the LinkKey
bits in the pairing request.
This is to ensure older remote devices do not get confused by the
additional bit(s) in the pairing request.
Bug:
25277879
Change-Id: I25424e541fa5244d8f522dffc62cdedc24f4f35b
Ajay Panicker [Tue, 27 Oct 2015 19:07:55 +0000 (19:07 +0000)]
Prevent integer overflows during GATT signing
am:
b335ee9496
* commit '
b335ee9496e671bf0ef0ab28a5990c9a024ac06b':
Prevent integer overflows during GATT signing
Ajay Panicker [Fri, 23 Oct 2015 23:49:11 +0000 (16:49 -0700)]
Prevent integer overflows during GATT signing
Bug:
17901099
Change-Id: Ib61113b19c9c9798b9ea992fad0ce997dcc2e2f8
Andre Eisenbach [Fri, 23 Oct 2015 23:52:57 +0000 (23:52 +0000)]
Merge "Raise alarm callback thread priority" into mnc-dr-dev
am:
2c8802ab5f
* commit '
2c8802ab5f4f73afe2a8b722d3b1bbd8e106fa24':
Raise alarm callback thread priority
Mattias Agren [Fri, 23 Oct 2015 23:52:49 +0000 (23:52 +0000)]
Reduce persistence on aquiring master role
am:
59d9673187
* commit '
59d9673187a50c259b42e5a71482304ab850a809':
Reduce persistence on aquiring master role
Andre Eisenbach [Fri, 23 Oct 2015 23:51:19 +0000 (23:51 +0000)]
Merge "Raise alarm callback thread priority" into mnc-dr-dev
Mattias Agren [Wed, 14 Oct 2015 15:05:58 +0000 (17:05 +0200)]
Reduce persistence on aquiring master role
Whenever a device has more than 1 ACL link active and transferring
data on one of its links via PAN, HH or JV (RFCOMM) the sys busy/idle
state toggles frequently. To avoid triggering role switches for each
of these events we filter this out and let the other SYS events handle
it in combination with other role policy management code. Ideally we
should revert the toggling to properly reflect the busy/idle state of
each profile but to limit risk of side effects at this stage we will
make this intermittent change.
This also affects audio streaming in certain cases.
Bug:
24570959,
25129209
Change-Id: I141e17ee069c82624e153fd8de5db90ae93724b9
Andre Eisenbach [Fri, 23 Oct 2015 17:40:36 +0000 (10:40 -0700)]
Raise alarm callback thread priority
Since alarms [/callbacks] are used in the critical audio path, raising
the thread priority is required to ensure timely encoding/transmission
of audio packets and avoiding thread pre-emption.
This patch indiscriminatly raises the (single) callback thread priority,
affecting all alarm callbacks. In the future, thread priotiry should be
adjusted based on the alarms pending in the queue.
Bug:
24570959
Change-Id: I64928fd7325f1d6f76815a185dbccf1e01ae30d2
Andre Eisenbach [Wed, 21 Oct 2015 02:00:07 +0000 (02:00 +0000)]
Fix 128-bit UUID byte order for GATT-over-BR/EDR
am:
deb1c7c5cf
* commit '
deb1c7c5cfacba8ec2d896f6bb120bdc81314d9a':
Fix 128-bit UUID byte order for GATT-over-BR/EDR
Andre Eisenbach [Wed, 21 Oct 2015 01:03:30 +0000 (18:03 -0700)]
Fix 128-bit UUID byte order for GATT-over-BR/EDR
128-bit UUIDs for GATT services discovered using SDP are byte-ordered
incorrectly. This patch fixes both the SDP discovery as well as the SDP
record creation code.
Bug:
24344122
Change-Id: Iee4bf33dcbbc5ee0f2380b48330107232bd0401b
Andre Eisenbach [Wed, 21 Oct 2015 01:37:00 +0000 (01:37 +0000)]
Merge "Workaround for H4 HCI stream corruption during LE scans" into mnc-dr-dev
am:
78870e0f38
* commit '
78870e0f38658e389e22dfba5da3f239f01966d7':
Workaround for H4 HCI stream corruption during LE scans
Andre Eisenbach [Wed, 21 Oct 2015 01:33:07 +0000 (01:33 +0000)]
Merge "Workaround for H4 HCI stream corruption during LE scans" into mnc-dr-dev
Andre Eisenbach [Wed, 21 Oct 2015 01:17:19 +0000 (01:17 +0000)]
Remove absolute volume control whitelist
am:
8289925079
* commit '
8289925079c40ec91fa99d0ea6817f796a66681a':
Remove absolute volume control whitelist
Andre Eisenbach [Fri, 11 Sep 2015 04:41:39 +0000 (21:41 -0700)]
Workaround for H4 HCI stream corruption during LE scans
Sometimes, during result-heavy LE scans, the UART byte stream can become
corrupted, leading to assertions caused by mis-interpreting the bytes
following the corruption.
This workaround looks for tell-tale signs of a BLE event and attempts to
skip the correct amount of bytes in the stream to re-synchronize onto a
packet boundary.
Bug:
23934838
Change-Id: Ifadaecf8077cb1defc7134c59c97302fca660f81
Andre Eisenbach [Mon, 19 Oct 2015 23:06:20 +0000 (16:06 -0700)]
Remove absolute volume control whitelist
Remove the absolute volume control whitelist to enable absolute volume
control for all compatible devices.
Bug:
25081918
Change-Id: Iab0e4b4c4fd3dac0fefdf62ec80419dd64b56c0c
Andre Eisenbach [Sun, 11 Oct 2015 13:43:14 +0000 (13:43 +0000)]
am
852bf498: Add Flic smart button to interop database
* commit '
852bf4980ea87a916e5f3037c9b897fd84c2417b':
Add Flic smart button to interop database
Andre Eisenbach [Mon, 5 Oct 2015 20:25:14 +0000 (13:25 -0700)]
Add Flic smart button to interop database
Bug:
24737963
Change-Id: If3b59437439305b490c5fc260a7080cee04f09c5
Andre Eisenbach [Wed, 7 Oct 2015 20:25:36 +0000 (20:25 +0000)]
am
6c25b3c0: Raise BTU and HCI thread priorities
* commit '
6c25b3c02c863cbb047e4cf8b4ec88d8335dac30':
Raise BTU and HCI thread priorities
Andre Eisenbach [Wed, 7 Oct 2015 18:16:37 +0000 (11:16 -0700)]
Raise BTU and HCI thread priorities
The audio sub-system and audio related tasks run at elevated thread
priorities in order to ensure timely handling of audio packets. This
patch raises the thread priority of lower layer Bluetooth tasks involved
in delivering audio packets to avoid thread pre-emption and subsequent
audio skipping.
Bug:
24570959
Change-Id: I5e19ee4590207df753f7b8bfc22174959722ec2d
Pavlin Radoslavov [Fri, 25 Sep 2015 22:22:04 +0000 (22:22 +0000)]
am
60563860: am
74dad515: Disable opening network debug ports for security reasons
* commit '
60563860e791d31c93daa404247272b3a0cb4e14':
Disable opening network debug ports for security reasons
Pavlin Radoslavov [Fri, 25 Sep 2015 22:13:37 +0000 (22:13 +0000)]
am
74dad515: Disable opening network debug ports for security reasons
* commit '
74dad51510f7d7b05c6617ef88168bf0bbdf3fcd':
Disable opening network debug ports for security reasons
Pavlin Radoslavov [Fri, 25 Sep 2015 21:13:56 +0000 (21:13 +0000)]
am
4cac544d: Disable opening network debug ports for security reasons
* commit '
4cac544da367d7458129631ddef6db4e3312cef7':
Disable opening network debug ports for security reasons
Pavlin Radoslavov [Thu, 24 Sep 2015 20:34:35 +0000 (13:34 -0700)]
Disable opening network debug ports for security reasons
By default, we open up to three TCP ports that are used
for debugging purpose:
* TCP port 8872 - used for forwarding btsnoop logs at real time
Note: the port is open only if "Bluetooth HCI snoop log" is enabled
in the Developer options
* TCP port 8873 - used for HCI debugging
* TCP port 8879 - used for debugging the Bluetooth counters
Those ports are disabled by default.
To enable, the following #define should be added at the top of the
corresponding file(s): btcore/src/counter.c hci/src/btsnoop_net.c
hci/src/hci_inject.c
#define BT_NET_DEBUG TRUE
Bug:
24371736
Change-Id: I5cb43af1a5d29c331eb5ef61a24dccbe95df6f40