OSDN Git Service
H Hartley Sweeten [Wed, 5 Nov 2014 17:31:40 +0000 (10:31 -0700)]
staging: comedi: quatech_daqp_cs: use comedi_async 'scans_done' to detect EOA
Remove the private data member 'count' and use the comedi_async 'scans_done'
member to detect the end-of-acquisition.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 5 Nov 2014 17:31:39 +0000 (10:31 -0700)]
staging: comedi: cb_pcidas64: use comedi_async 'scans_done' to detect AO EOA
Remove the private data member 'ao_count' and use the comedi_async 'scans_done'
member to detect the analog output end-of-acquisition.
Use the comedi_nsamples_left() helper to get the number of samples to actually
read from the async buffer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 5 Nov 2014 17:31:38 +0000 (10:31 -0700)]
staging: comedi: cb_pcidas64: use comedi_async 'scans_done' to detect AI EOA
Remove the private data member 'ai_count' and use the comedi_async 'scans_done'
member to detect the analog output end-of-acquisition.
Use the comedi_nsamples_left() helper to get the number of samples to actually
add to the async buffer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 5 Nov 2014 17:31:37 +0000 (10:31 -0700)]
staging: comedi: cb_pcidas: use comedi_async 'scans_done' to detect AO EOA
Remove the private data member 'ao_count' and use the comedi_async 'scans_done'
member to detect the analog output end-of-acquisition.
Use the comedi_nsamples_left() helper to get the number of samples to actually
read from the async buffer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 5 Nov 2014 17:31:36 +0000 (10:31 -0700)]
staging: comedi: cb_pcidas: use comedi_async 'scans_done' to detect AI EOA
Remove the private data member 'count' and use the comedi_async 'scans_done'
member to detect the analog input end-of-acquisition.
Use the comedi_nsamples_left() helper to get the number of samples to actually
add to the async buffer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 5 Nov 2014 17:31:35 +0000 (10:31 -0700)]
staging: comedi: usbduxfast: use comedi_async 'scans_done' to detect AI EOA
Remove the private data member 'ai_sample_count' and use the comedi_async
'scans_done' member to detect the analog input end-of-acquisition.
Use the comedi_nsamples_left() helper to get the number of samples to actually
add to the async buffer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 5 Nov 2014 17:31:34 +0000 (10:31 -0700)]
staging: comedi: amplc_pci230: use comedi_async 'scans_done' to detect AI EOA
Remove the private data member 'ai_scan_count' and use the comedi_async 'scans_done'
member to detect the analog input end-of-acquisition.
Use the comedi_nsamples_left() helper to work out the number of 'wake' samples in
pci230_ai_update_fifo_trigger_level() and the number of 'todo' samples actually
added to the async buffer in pci230_handle_ai().
Remove the unnecessary COMEDI_CB_OVERFLOW event for the hardware FIFO overflow
error. The COMEDI_CB_ERROR event will terminate the command.
comedi_buf_write_samples() can fail if the async buffer does not have room for
the sample. The it will set the COMEDI_CB_OVERFLOW event and return 0. Detect
this and quit trying to read and add more samples. The event will terminate the
command.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 5 Nov 2014 17:31:33 +0000 (10:31 -0700)]
staging: comedi: drivers: introduce comedi_nsamples_left()
Introduce a helper function to calculate the number of samples remaining
when the cmd->stop_src is TRIG_COUNT.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 5 Nov 2014 17:31:32 +0000 (10:31 -0700)]
staging: comedi: amplc_pci230: use comedi_async 'scans_done' to detect AO EOA
Remove the private data member 'ai_count' and use the comedi_async 'scans_done'
member to detect the analog output end-of-acquisition.
Use the helper function comedi_nscans_left() to get the number of scans in the
async buffer of left in the command.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 5 Nov 2014 17:31:31 +0000 (10:31 -0700)]
staging: comedi: comedi_test: use comedi_async 'scans_done' to detect EOA
Remove the private data member 'ai_count' and use the comedi_async 'scans_done'
member to detect the end-of-acquisition.
Use the helper function comedi_nscans_left() to check if the number of scans
left in the command.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 5 Nov 2014 17:31:30 +0000 (10:31 -0700)]
staging: comedi: amplc_pci224: use comedi_async 'scans_done' to detect EOA
Remove the private data member 'ao_stop_count' and use the comedi_async
'scans_done' member to detect the end-of-acquisition.
Use the helper function comedi_nscans_left() to determine the number of scans
available in the async buffer or left in the command.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 5 Nov 2014 17:31:29 +0000 (10:31 -0700)]
staging: comedi: drivers: introduce comedi_nscans_left()
Introduce a helper function to determine the number of scans left in
the async command.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 31 Oct 2014 17:47:39 +0000 (17:47 +0000)]
staging: comedi: split out PCI support into new module
Setting the `CONFIG_COMEDI_PCI_DRIVERS` kernel configuration option
makes the main "comedi" module depend on the PCI support in the kernel.
That's not that big a deal since PCI support in the kernel is either
built into the kernel or is absent, and is not in a separate module.
Still, not all low-level Comedi drivers need PCI support, so we could
save a bit of space by not including it. The Comedi PCI support
functions are all in "comedi_pci.c". Turn it into a separate module so
the support code doesn't have to be loaded unnecessarily.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 31 Oct 2014 17:47:38 +0000 (17:47 +0000)]
staging: comedi: split out USB support into new module
Setting the `CONFIG_COMEDI_USB_DRIVERS` kernel configuration option
makes the main "comedi" module depend on the "usbcore" module. But
perhaps the machine has no USB controllers (or they have been disabled),
in which case the "usbcore" module may have been pulled in
unnecessarily. Only a few low-level Comedi drivers require USB support.
The Comedi USB support functions are all in "comedi_usb.c". Turn it
into a separate module so we don't have to pull in the "usbcore" and
"usb_common" modules unnecessarily.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 31 Oct 2014 17:47:37 +0000 (17:47 +0000)]
staging: comedi: split out PCMCIA support into new module
Setting the `CONFIG_COMEDI_PCMCIA_DRIVERS` kernel configuration option
makes the main "comedi" module depend on the "pcmcia" module, but many
machines don't have PCMCIA slots and only a few low-level Comedi drivers
need PCMCIA support. The Comedi PCMCIA support functions are all in
"comedi_pcmcia.c". Turn it into a separate module so we don't have to
pull in the other PCMCIA support modules unnecessarily.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 31 Oct 2014 17:47:36 +0000 (17:47 +0000)]
staging: comedi: comedidev.h: remove some #ifdefs
Some declarations and macro definitions in "comedidev.h" are protected
by various `#ifdef`s for kernel configuration options, but the header
file compiles fine without the `#ifdef`s regardless of whether those
config option macros are defined or not. Remove the `#ifdef`s and
compile the affected code unconditionally.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 31 Oct 2014 17:47:35 +0000 (17:47 +0000)]
staging: comedi: comedidev.h: remove dummy PCI support functions
Some low-level Comedi driver modules used to handle PCI devices and ISA
devices in the same module with some conditional compilation. To reduce
the amount of conditional compilation, some dummy inline versions of
`comedi_to_pci_dev()`, `comedi_pci_enable()`, `comedi_pci_disable()`,
and `comedi_pci_detach()` are defined in "comedidev.h" if
`CONFIG_COMEDI_PCI_DRIVERS` is undefined. Since those Comedi low-level
driver modules have since had PCI support split out into separate
modules, there is no need to keep the dummy inline functions around any
more, so remove them.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Thu, 6 Nov 2014 20:02:05 +0000 (20:02 +0000)]
staging: vt6655: Fix issue of byPacketType is not set at all.
set by calling CARDbyGetPktType.
change CARDbIsOFDMinBasicRate to check basic_rates.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Thu, 6 Nov 2014 20:02:04 +0000 (20:02 +0000)]
staging: vt6655: BBbReadEmbedded replace __iomem with vnt_private
Changing callers to point to private
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Thu, 6 Nov 2014 20:02:03 +0000 (20:02 +0000)]
staging: vt6655: BBbWriteEmbedded replace __iomem with vnt_private for callers
Referencing dwIoBase inside function.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Thu, 6 Nov 2014 20:02:02 +0000 (20:02 +0000)]
staging: vt6655: baseband/rf s_bAL7230Init change __iomem for baseband functions
Replace __iomem with vnt_private providing pointer for dwIoBase
Change BBvPowerSaveModeON and BBvPowerSaveModeOFF to vnt_private and
reference __iomem there, to be removed later.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Thu, 6 Nov 2014 20:02:01 +0000 (20:02 +0000)]
staging: vt6655: baseband replace __iomem where caller is priv dereferenced.
Replace with stucture vnt_private *priv
in functions
BBvSoftwareReset
BBvSetTxAntennaMode
BBvSetRxAntennaMode
BBvSetDeepSleep
BBvExitDeepSleep
__iomem *dwIoBase will be moved into BBbWriteEmbedded and BBbReadEmbedded
later.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Thu, 6 Nov 2014 20:02:00 +0000 (20:02 +0000)]
staging: vt6655: baseband.h remove pDevice from struct vnt_private pointer
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sudip Mukherjee [Fri, 7 Nov 2014 12:18:35 +0000 (17:48 +0530)]
staging: unisys: dereferencing NULL pointer
we can reach the label Away in total five situation and in four of
of them pDevInfo is NULL. so we were basically dereferencing a NULL
pointer.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sudip Mukherjee [Fri, 7 Nov 2014 12:18:34 +0000 (17:48 +0530)]
staging: unisys: unneeded NULL check
the NULL check for memregion is not required as it has already been
checked for NULL after kzalloc. so we can reach this part of the code
only if memregion is not NULL.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bryan Thompson [Thu, 6 Nov 2014 19:13:11 +0000 (14:13 -0500)]
staging: unisys: visorchannel: Add braces to else arm of if/else statement
Add braces to the else arm of an if/else block in visorchannel_funcs.c
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bryan Thompson [Thu, 6 Nov 2014 19:13:10 +0000 (14:13 -0500)]
staging: unisys: visorchannel: Rename goto label Away
Rename the goto label used throughout visorchannel_funcs.c from Away to cleanup.
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bryan Thompson [Thu, 6 Nov 2014 19:13:09 +0000 (14:13 -0500)]
staging: unisys: visorchannel: Adjust lines to contain a maximum of 80 characters
Split multiple logging lines to get them closer to 80 characters per line.
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bryan Thompson [Thu, 6 Nov 2014 19:13:08 +0000 (14:13 -0500)]
staging: unisys: visorchannel: Place logical continuation at the end of a line
Move the || logical continuation from the start of the second line of an if statement to the end of the first line.
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bryan Thompson [Thu, 6 Nov 2014 19:13:07 +0000 (14:13 -0500)]
staging: unisys: visorchannel: Remove unnecessary parentheses
Remove extraneous parentheses around a variable in visorchannel_funcs.c
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bryan Thompson [Thu, 6 Nov 2014 19:13:06 +0000 (14:13 -0500)]
staging: unisys: visorchannel: Remove space between cast and variable
Remove the whitespace between a cast and the variable in visorchannel_funcs.c
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bryan Thompson [Thu, 6 Nov 2014 19:13:05 +0000 (14:13 -0500)]
staging: unisys: visorchannel: Fix alignment issues
Use the appropriate whitespace for multiline statements in visorchannel_funcs.c
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bryan Thompson [Thu, 6 Nov 2014 19:13:04 +0000 (14:13 -0500)]
staging: unisys: visorchannel: Remove multiple blank lines
Remove the instances of multiple blank lines in the visorchannel files.
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 5 Nov 2014 17:21:09 +0000 (10:21 -0700)]
staging: comedi: das800: use comedi_async 'scans_done' to detect EOA
Remove the private data member 'count' and use the comedi_async 'scans_done'
member to detect the end-of-acquisition.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 5 Nov 2014 17:21:08 +0000 (10:21 -0700)]
staging: comedi: addi_apci_3120: use comedi_async 'scans_done' to detect EOA
Remove the private data member 'ai_AiActualScan' and use the comedi_async
'scans_done' member to detect the end-of-acquisition.
The function v_APCI3120_InterruptDmaMoveBlock16bit() is then just a wrapper
for comedi_buf_write_samples(). Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 5 Nov 2014 17:21:07 +0000 (10:21 -0700)]
staging: comedi: usbduxsigma: use comedi_async 'scans_done' to detect AI EOA
Remove the private data member 'ai_sample_count' and use the comedi_async
'scans_done' member to detect the analog input end-of-acquisition.
Move the EOA check so it happens after adding the samples from the current
urb to the async buffer. This prevents the unnecessary resubmit of the urb
when the EOA occurs.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 5 Nov 2014 17:21:06 +0000 (10:21 -0700)]
staging: comedi: usbduxsigma: use comedi_async 'scans_done' to detect AO EOA
Remove the private data member 'ao_sample_count' and use the comedi_async
'scans_done' member to detect the analog output end-of-acquisition.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 5 Nov 2014 17:21:05 +0000 (10:21 -0700)]
staging: comedi: usbdux: use comedi_async 'scans_done' to detect AI EOA
Remove the private data member 'ai_sample_count' and use the comedi_async
'scans_done' member to detect the analog input end-of-acquisition.
Move the EOA check so it happens after adding the samples from the current
urb to the async buffer. This prevents the unnecessary resubmit of the urb
when the EOA occurs.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 5 Nov 2014 17:21:04 +0000 (10:21 -0700)]
staging: comedi: usbdux: use comedi_async 'scans_done' to detect AO EOA
Remove the private data member 'ao_sample_count' and use the comedi_async
'scans_done' member to detect the analog output end-of-acquisition.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 5 Nov 2014 17:21:03 +0000 (10:21 -0700)]
staging: comedi: s626: use comedi_async 'scans_done' to detect EOA
Remove the private data member 'ai_sample_count' and use the comedi_async
'scans_done' member to detect the end-of-acquisition.
Also, remove the unnecessary COMEDI_CB_EOS event. The core automatically
detects and adds that event.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 5 Nov 2014 17:21:02 +0000 (10:21 -0700)]
staging: comedi: pcmuio: use comedi_async 'scans_done' to detect EOA
Remove the private data member 'stop_count' and use the comedi_async 'scans_done'
member to detect the end-of-acquisition.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 5 Nov 2014 17:21:01 +0000 (10:21 -0700)]
staging: comedi: pcmmio: use comedi_async 'scans_done' to detect EOA
Remove the private data member 'count' and use the comedi_async 'scans_done'
member to detect the end-of-acquisition.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 5 Nov 2014 17:21:00 +0000 (10:21 -0700)]
staging: comedi: adv_pci1710: use comedi_async 'scans_done' to detect EOA
Remove the private data member 'ai_act_scan' and use the comedi_async
'scans_done' member to detect the end-of-acquisition.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 5 Nov 2014 17:20:59 +0000 (10:20 -0700)]
staging: comedi: pcl818: use comedi_async 'scans_done' to detect EOA
Remove the private data member 'ai_act_scan' and use the comedi_async
'scans_done' member to detect the end-of-acquisition.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 5 Nov 2014 17:20:58 +0000 (10:20 -0700)]
staging: comedi: pcl818: remove private data member 'ai_act_chan'
This member of the private data is set to '0' but never used. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 5 Nov 2014 17:20:57 +0000 (10:20 -0700)]
staging: comedi: pcl816: use comedi_async 'scans_done' to detect EOA
Remove the private data member 'ai_act_scan' and use the comedi_async
'scans_done' member to detect the end-of-acquisition.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 5 Nov 2014 17:20:56 +0000 (10:20 -0700)]
staging: comedi: pcl812: use comedi_async 'scans_done' to detect EOA
Remove the private data member 'ai_act_scan' and use the comedi_async
'scans_done' member to detect the end-of-acquisition.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 5 Nov 2014 17:20:55 +0000 (10:20 -0700)]
staging: comedi: pcl711: use comedi_async 'scans_done' to detect EOA
Remove the private data member 'ntrig' and use the comedi_async 'scans_done'
member to detect the end-of-acquisition.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 5 Nov 2014 17:20:54 +0000 (10:20 -0700)]
staging: comedi: amplc_dio200_common: use comedi_async 'scans_done' to detect EOA
Remove the private data member 'stopcount' and use the comedi_async 'scans_done'
member to detect the end-of-acquisition.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 5 Nov 2014 17:20:53 +0000 (10:20 -0700)]
staging: comedi: addi_apci_2032: use comedi_async 'scans_done' to detect EOA
Remove the private data member 'stop_count' and use the comedi_async 'scans_done'
member to detect the end-of-acquisition.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 5 Nov 2014 17:20:52 +0000 (10:20 -0700)]
staging: comedi: comedidev.h: add 'scans_done' member to comedi_async
Introduce a new member to comedi_async to count the number of scans completed.
This member is cleared by comedi_buf_reset() along with the other comedi_async
members. It is incremented in comedi_inc_scan_progress() when the end of scan
is detected.
This member will be used to clean up the scan counting in the comedi drivers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mariusz Gorski [Tue, 4 Nov 2014 21:47:19 +0000 (22:47 +0100)]
staging: panel: Fix single-open policy race condition
Fix the implementation of a single-open policy for both
devices (lcd and keypad) by using atomic_t instead of plain ints.
Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Tue, 4 Nov 2014 14:49:46 +0000 (14:49 +0000)]
staging: vt6655: change tx wake queue
Wake queue in the dwIsr loop of device_intr instead of device_tx_srv.
This fixes an issue when ISR_TXDMA0 or ISR_AC0DMA does not occur
device_tx_srv is not called and the queue gets stuck in stopped
condition.
On test if the queue is stuck another MACvTransmitAC0 or MACvTransmit0
in vnt_tx_packet will clear it.
Check on vif that both buffers are available and the queue is stopped.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Philipp Zabel [Tue, 4 Nov 2014 10:52:48 +0000 (11:52 +0100)]
staging: imx-drm: remove old FSF address from license text
Linux already includes a copy of the GPL, checkpatch compains about the address.
Remove it from the license text.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 4 Nov 2014 18:09:01 +0000 (18:09 +0000)]
staging: comedi: add ioctls to set per-file read and write subdevice
Now that Comedi has the structures in place to support setting the
current "read" and/or "write" subdevice on a per-file object basis, add
new ioctls to set them. The newly chosen "read" ("write") subdevice
needs to support "read" ("write") commands, and the file cannot be busy
handling a "read" ("write") command on the previous subdevice (if any).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 4 Nov 2014 18:09:00 +0000 (18:09 +0000)]
staging: comedi: prepare support for per-file read and write subdevices
Comedi devices may have several subdevices that support "read" and/or
"write" asynchronous commands that use the "read" or "write" file
operations for data transfer. The low-level Comedi drivers may nominate
a default "read" subdevice and/or a default "write" subdevice, but it
may have other subdevices that support asynchronous commands.
The Comedi core provides a somewhat clunky mechanism to provide access
to the asynchronous command support of the non-default subdevices. When
a low-level device is "attached" to a core Comedi device, it dynamically
allocates a minor device number for each of the subdevices that support
asynchrounous commands and associates them with files created in SysFS
named "comediX_subdY", where "X" is the minor device number of the main
comedi device, and "Y" is the subdevice number. An application can open
these subdevice-specific files and they behave like the regular
"comediX" files except that the "read" and/or "write" subdevice may be
different to the default chosen by the low-level driver.
This patch adds a layer of indirection between the file object and the
comedi device object to allow the current "read" and/or "write"
subdevice to be altered after opening the Comedi device, on a per-file
object basis. The advantage is that an application only needs to open
the main Comedi device file and can then choose which subdevice it wants
to "read" or "write". The main Comedi device file can be opened more
than once, and each file object can choose the "read" and "write"
subdevices independently.
The new `struct comedi_file` is created on "open" and freed on
"release". It includes pointers to the main Comedi device structure,
and to the current "read" and "write" subdevice structures (which may be
NULL). It also has information to keep track of when a low-level device
has been attached or detached since the previous time the file object
was used. In that case, the current "read" and "write" subdevices in
the `struct comedi_file` will be changed to the new defaults (or set to
NULL). (The change to new defaults is done by `comedi_file_reset()`.
The checking for attach/detach is done by `comedi_file_check()` which
will call `comedi_file_reset()` if there have been any attach/detach
operations since the previous call.)
A subsequent patch will add the ioctls to change the current "read" and
"write" subdevices.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Tue, 4 Nov 2014 21:43:07 +0000 (23:43 +0200)]
staging: media: lirc: modify print calls
This patches replaces one pr_debug call by dev_dbg and
changes the device used by one of the dev_err calls.
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daeseok Youn [Wed, 5 Nov 2014 08:58:11 +0000 (17:58 +0900)]
staging: dgap: remove unnecessary function
The dgap_init_global() initialize the dgap_board
that is a global variable as static and dgap_poll_timer.
But init_timer() is called twice in dgap_start() and dgap_board
doesn't need to be initialized to NULL.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Wed, 5 Nov 2014 21:08:59 +0000 (21:08 +0000)]
staging: vt6655 baseband.c camel case replace pDevice -> priv
for struct vnt_private
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Wed, 5 Nov 2014 21:08:58 +0000 (21:08 +0000)]
staging: vt6655: device.h remove dead member wstats
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Wed, 5 Nov 2014 21:08:57 +0000 (21:08 +0000)]
staging: vt6655: device_set_options remove dead variables
uConnectionRate
wRTSThreshold
byOpMode
b11hEnable
uChannel
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Wed, 5 Nov 2014 21:08:56 +0000 (21:08 +0000)]
staging: vt6655: baseband.c/h remove dead functions
These functions are not used so remove them
BBbIsRegBitsOn
BBbIsRegBitsOff
BBvReadAllRegs
BBvLoopbackOn
BBvLoopbackOff
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Wed, 5 Nov 2014 21:08:55 +0000 (21:08 +0000)]
staging: vt6655: device_init_registers remove uConnectionRate
The device starts up with a default rate of 54M
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Wed, 5 Nov 2014 21:08:54 +0000 (21:08 +0000)]
staging: vt6655: device_set_options remove unused ethernet addresses
Removing these variables
abyBroadcastAddr
abySNAP_RFC1042
abySNAP_Bridgetunnel
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Wed, 5 Nov 2014 21:08:53 +0000 (21:08 +0000)]
staging: vt6655: device_get_options remove unused device parameters
IP_byte_align
Channel
PreambleType
RTSThreshold
ConnectionRate
OPMode
b80211hEnable
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Wed, 5 Nov 2014 21:08:52 +0000 (21:08 +0000)]
staging: vt6655: remove fragmentation from driver
fragmentation is now handled by mac80211.
Remove functions
device_alloc_frag_buf
device_init_defrag_cb
device_free_frag_buf
Removing
typedef struct tagSDeFragControlBlock
frag_thresh
sRxDFCB
cbDFCB;
cbFreeDFCB;
uCurrentDFCBIdx;
macros
FRAG_THRESH_MIN
FRAG_THRESH_MAX
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Wed, 5 Nov 2014 21:08:51 +0000 (21:08 +0000)]
staging: vt6655: mac.c and mac.h remove dead functions.
MACvReadAllRegs
MACbyReadMultiAddr
MACvWriteMultiAddr
MACvSetMultiAddrByHash
MACvResetMultiAddrByHash
MACvSetRxThreshold
MACvGetRxThreshold
MACvSetTxThreshold
MACvGetTxThreshold
MACvSetDmaLength
MACvGetDmaLength
MACvGetLongRetryLimit
MACbIsInLoopbackMode
MACbCompareContext
MACvOneShotTimer0MicroSec
MACbTxDMAOff
MACvClearBusSusInd
MACvEnableBusSusEn
MACbFlushSYNCFifo
MACvSetDefaultKeyEntry
MACvEnableDefaultKey
MACvDisableDefaultKey
MACvSetDefaultTKIPKeyEntry
MACvSetDefaultKeyCtl
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Wed, 5 Nov 2014 21:08:50 +0000 (21:08 +0000)]
staging: vt6655: mac.c/h remove member type comments
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Wed, 5 Nov 2014 21:08:49 +0000 (21:08 +0000)]
staging: vt6655: mac remove dead variable TxRate_iwconfig
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Wed, 5 Nov 2014 17:47:50 +0000 (12:47 -0500)]
staging: unisys: remove unused functions from uislib.c
Delete uislib_client_add_vnic() and uislib_client_delete_vnic(), since these
are never used.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ken Depro [Wed, 5 Nov 2014 15:57:57 +0000 (10:57 -0500)]
staging: unisys: Remove extra blank lines from virthba files
This patch removes extra blank lines from the virthba header and source
files. This is the first of a set of patches that will clean up the
virthba source file. The only checkpatch issue in the header file was
the blank line warnings.
Signed-off-by: Ken Depro <kenneth.depro@unisys.com>
Signed-off-by: Ben Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bryan Thompson [Tue, 4 Nov 2014 21:13:17 +0000 (16:13 -0500)]
staging: unisys: virtpci: Remove GET_BUS_DEV macro
The GET_BUS_DEV macro contained flow control statements that are undesirable.
This patch removes the macro and places the code in each function.
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Tue, 4 Nov 2014 16:25:25 +0000 (11:25 -0500)]
staging: unisys: refactor visorutil_mod_init()
Fix the function name declaration so it is just one line, and add the missing
brackets to the else clause in the if statement.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Tue, 4 Nov 2014 16:25:24 +0000 (11:25 -0500)]
staging: unisys: refactor visorutil_spar_detect()
Fix the declaration line so it is just one single line, and add the missing
brackets on the else clause in the if statement.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Tue, 4 Nov 2014 16:25:23 +0000 (11:25 -0500)]
staging: unisys: fix spacing in visorkmodutils.c
Remove all the extraneous blank lines from visorkmodutils.c.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Tue, 4 Nov 2014 16:25:22 +0000 (11:25 -0500)]
staging: unisys: fix bracketing in visor_periodic_work_stop()
The last if statement in this function is missing brackets on the else
clause. Add them.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Tue, 4 Nov 2014 16:25:21 +0000 (11:25 -0500)]
staging: unisys: fix spacing in periodic_work.c
Get rid of all extraneous blank lines in periodic_work.c.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Tue, 4 Nov 2014 16:25:20 +0000 (11:25 -0500)]
staging: unisys: fix sizeof() in visor_memregion_create_overlapped()
Use the variable name rather than the type in the sizeof() call in this
function.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Tue, 4 Nov 2014 16:25:19 +0000 (11:25 -0500)]
staging: unisys: fix line over 80 characters in mapit()
The error output in mapit() in memregion_direct.c has variables past the 80
character limit. Move them to the next line, but the string constant will still
go past the limit, and that's okay.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Tue, 4 Nov 2014 16:25:18 +0000 (11:25 -0500)]
staging: unisys: remove extra blank lines in memregion_direct.c
Get rid of the extra blank lines in this file.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Tue, 4 Nov 2014 16:25:17 +0000 (11:25 -0500)]
staging: unisys: remove unnecessary spaces in casts in memregion_direct.c
Get rid of all extra spaces between casts and their targets in this file.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Tue, 4 Nov 2014 16:25:16 +0000 (11:25 -0500)]
staging: unisys: refactor visor_memregion_create()
Fix the sizeof() so it uses the variable name rather than the type, fix the
argument alignment to the kzalloc(), and rename the goto label.
Away => cleanup
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Tue, 4 Nov 2014 16:25:15 +0000 (11:25 -0500)]
staging: unisys: remove typedef for MEMREGION
Remove the typedef for this structure and just use struct memregion instead.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Tue, 4 Nov 2014 16:25:13 +0000 (11:25 -0500)]
staging: unisys: split double assignment in visor_charqueue_create()
Split up the doubled assignment in visor_charqueue_create() into two separate
assignments.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Tue, 4 Nov 2014 16:25:12 +0000 (11:25 -0500)]
staging: unisys: refactor CHARQUEUE
Remove the typedef and just use struct charqueue instead. Update all references.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Tue, 4 Nov 2014 16:25:11 +0000 (11:25 -0500)]
staging: unisys: fix line spacing in charqueue.c
Clean up the extraneous blank lines in charqueue.c.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Wed, 5 Nov 2014 19:42:48 +0000 (11:42 -0800)]
Merge tag 'iio-for-3.19a' of git://git./linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First round of new drivers, features and cleanups for IIO in the 3.19 cycle.
New drivers / supported parts
* rockchip - rk3066-tsadc variant
* si7020 humidity and temperature sensor
* mcp320x - add mcp3001, mcp3002, mcp3004, mcp3008, mcp3201, mcp3202
* bmp280 pressure and temperature sensor
* Qualcomm SPMI PMIC current ADC driver
* Exynos_adc - support exynos7
New features
* vf610-adc - add temperature sensor support
* Documentation of current attributes, scaled pressure, offset and
scaled humidity, RGBC intensity gain factor and scale applied to
differential voltage channels.
* Bring iio_event_monitor up to date with newer modifiers.
* Add of_xlate function to allow for complex channel mappings from the
device tree.
* Add -g parameter to generic_buffer example to allow for devices with
directly fed (no trigger) buffers.
* Move exynos driver over to syscon for PMU register access.
Cleanups, fixes for new drivers
* lis3l02dq drop an unneeded else.
* st sensors - renam st_sensors to st_sensor_settings (for clarity)
* st sensors - drop an unused parameter from all the probe utility
functions.
* vf610 better error handling and tidy up.
* si7020 - cleanups following merge
* as3935 - drop some unnecessary semicolons.
* bmp280 - fix the pressure calculation.
Darshana Padmadas [Wed, 5 Nov 2014 16:18:11 +0000 (21:48 +0530)]
iio: Add ABI documentation for scaled voltage
This patch adds an entry in ABI documentation for in_voltage-voltage_scale.
It has at least one user driver, adis16220, in accel driver.
Signed-off-by: Darshana Padmadas <darshanapadmadas@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Hartmut Knaack [Fri, 31 Oct 2014 01:22:00 +0000 (01:22 +0000)]
iio:pressure:bmp280: fix pressure calculation
According to the datasheet and as defined in struct bmp280_comp_press, dig_p1 is
of type u16, while dig_p2 to dig_p9 are of type s16. In
bmp280_read_compensation_press(), values read from the device were treated as
the wrong type.
In bmp280_read_press() the fractional part of the measured pressure is
calculated wrong. A better way is to use *val for the raw pressure and *val2 for
the quotient and let the core do the proper conversion using IIO_VAL_FRACTIONAL.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Acked-by: Vlad Dogaru <vlad.dogaru@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Abhilash Kesavan [Sat, 1 Nov 2014 04:00:43 +0000 (09:30 +0530)]
iio: adc: exynos_adc: Add support for exynos7
The ADC on exynos7 is quite similar to ADCv2. The differences are as
follows:
- exynos7-adc has 8 input channels (as against 10 in ADCv2).
- exynos7 does not include an ADC PHY control register.
- Some ADC_CON2 register bits being used in ADCv2 are listed as
reserved in exynos7-adc. This results in a different init_hw
function for exynos7.
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Naveen Krishna Chatradhi [Tue, 16 Sep 2014 08:58:00 +0000 (09:58 +0100)]
ARM: dts: exynos: Add sysreg phandle to ADC node
Instead of using the ADC_PHY register base address, use sysreg phandle
in ADC node to control ADC_PHY configuration register.
This patch adds syscon node for Exynos3250, Exynos4x12, Exynos5250,
and Exynos5420, Exynos5800.
Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
To: linux-samsung-soc@vger.kernel.org
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Naveen Krishna Chatradhi [Tue, 16 Sep 2014 08:58:00 +0000 (09:58 +0100)]
Documentation: dt-bindings: update exynos-adc.txt with syscon handle
This patch updates the DT bindings for ADC in exynos-adc.txt with the
syscon phandle to the ADC nodes.
Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
To: devicetree@vger.kernel.org
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Naveen Krishna Chatradhi [Tue, 16 Sep 2014 08:58:00 +0000 (09:58 +0100)]
iio: exyno-adc: use syscon for PMU register access
This patch updates the IIO based ADC driver to use syscon and regmap
APIs to access and use PMU registers instead of remapping the PMU
registers in the driver.
Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
To: linux-iio@vger.kernel.org
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Karol Wrona [Tue, 4 Nov 2014 14:29:39 +0000 (15:29 +0100)]
staging: iio: Add notrigger mode for generic_buffer
Some IIO devices do not use the triggers. This patch makes trigger setting
conditional so generic_buffer can be used when triggers are disabled.
Signed-off-by: Karol Wrona <k.wrona@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
George McCollister [Fri, 31 Oct 2014 15:44:23 +0000 (10:44 -0500)]
iio: as3935: Remove unnecessary semicolons
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Acked-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Jia He [Tue, 4 Nov 2014 01:39:58 +0000 (09:39 +0800)]
staging: rtl8188eu: Fix coding style space related ERROR problems
This fixes space related ERROR reports by checkpatch.pl
Generated by $ git ls-files "drivers/staging/rtl8188eu/*.[ch]" | \
xargs ./scripts/checkpatch.pl -f --fix-inplace --strict --types=SPACING
Already checked by text comparasion
$git diff -w
and binary comparasion of r8188eu.ko
$objdiff diff <old_commit> <new_commit>
Signed-off-by: Jia He <hejianet@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joe Perches [Tue, 4 Nov 2014 00:25:44 +0000 (16:25 -0800)]
staging: ft1000: Logging message neatening
Use a more common logging style.
o Convert DEBUG macros to pr_debug
o Add pr_fmt
o Remove embedded function names from pr_debug
o Convert printks to pr_<level>
o Coalesce formats and align arguments
o Add missing terminating newlines
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joe Perches [Tue, 4 Nov 2014 00:25:43 +0000 (16:25 -0800)]
staging: ft1000: Whitespace neatening
Use normal kernel style, indentation and alignment.
git diff -w shows no difference
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rickard Strandqvist [Sun, 2 Nov 2014 22:12:04 +0000 (23:12 +0100)]
staging: comedi: drivers: comedi_bond.c: Remove unneeded #define
Remove unneeded #define. This was previously included in a patch set
two but patchset one was taken by mistake.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 31 Oct 2014 19:04:36 +0000 (12:04 -0700)]
staging: comedi: ni_at_a2150: use sample manipulation helpers
Use the recently added sample manipulation helpers to remove the hardcoded
assumption of the sample size.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>