* s390-opc.txt: Add unnormalized hfp multiply and multiply-and-add
instructions.

* m32r.opc (parse_slo16): Fix bad application of previous patch.

daily update

*** empty log message ***

* bfin-dis.c (print_insn_bfin): Do proper endian transform when
reading instruction from memory.

m32r.opc (parse_slo16): Better version of previous patch.

2005-10-17  Jim Blandy  <jimb@redhat.com>

* dwarf2expr.c (dwarf_expr_fetch): Use correct comparison to
detect stack underflow.

*** empty log message ***

daily update

2005-10-17  Paul Gilliam  <pgilliam@us.ibm.com>

        * gdb.arch/altivec-regs.exp: Adjust "info reg vrsave" and "info reg
        vscr" tests to better match output.

* configure.in (bfin-*-*): Use test, not brackets, in if statement.
* configure: Regenerate.

daily update

*** empty log message ***

* hppa.h (pa_opcodes): Add two fcmp opcodes.  Reorder ftest opcodes.
Add FLAG_STRICT to pa10 ftest opcode.

daily update

*** empty log message ***

2005-10-15  H.J. Lu  <hongjiu.lu@intel.com>

* coff-rs6000.c (rs6000coff_vec): Initialize
_bfd_match_sections_by_type with
_bfd_generic_match_sections_by_type.
(pmac_xcoff_vec): Likewise.
* coff64-rs6000.c (rs6000coff64_vec): Likewise.
(aix5coff64_vec): Likewise.

bfd/

2005-10-15  H.J. Lu  <hongjiu.lu@intel.com>

PR ld/1467
* elf-bfd.h (_bfd_elf_match_sections_by_type): New.
(_bfd_generic_match_sections_by_type): New. Defined.

* elf.c (_bfd_elf_match_sections_by_type): New.

* libbfd-in.h (_bfd_generic_match_sections_by_type): New.

* bfd-in2.h: Regenerated.
* libbfd.h: Likewise.

* libbfd.c (_bfd_generic_match_sections_by_type): New.

* targets.c (BFD_JUMP_TABLE_LINK): Initialize
_bfd_match_sections_by_type with
_bfd_generic_match_sections_by_type.
(bfd_target): Add _bfd_match_sections_by_type.

ld/

2005-10-15  H.J. Lu  <hongjiu.lu@intel.com>

PR ld/1467
* emultempl/elf32.em: Include "elf-bfd.h".
(gld${EMULATION_NAME}_place_orphan): Check section type and
don't use section name for ELF input sections.

* ld.texinfo: Document orphan section processing.

* ldlang.c (lang_output_section_find_by_flags): Match section
types by calling bfd_match_sections_by_type.

daily update

*** empty log message ***

2005-10-14  Paul Gilliam  <pgilliam@us.ibm.com>

        * rs6000-tdep.c (rs6000_register_reggroup_p): Add vscr to test for
        vector registers.

m32r.opc (parse_slo16): Do not assume a 32-bit host word size.

*** empty log message ***

daily update

* Makefile.in (linux-thread-db.o): Depend on $(gdbcore_h).

* linux-thread-db.c (enable_thread_event): Extend pointer value as
specified by target.
(thread_db_get_thread_local_address): Likewise.

* gas/hppa/basic/basic.exp (do_system): Adjust for removal of lha
instructions from system.s.
* gas/hppa/basic/system.s (lha): Remove.

* hppa.h (pa_opcodes): Remove lha entries.

*** empty log message ***

daily update

2005-10-12  Jim Blandy  <jimb@redhat.com>

* gdb.base/structs.exp (any): New function.
(test_struct_returns): Don't make any assumptions at all about
what value the function returns when GDB can't set the return
value.

daily update

*** empty log message ***

daily update

*** empty log message ***

    * gdb.ada/arrayidx/p.adb: New file.
        * gdb.ada/arrayidx.exp: New testcase

    * gdb.ada/array_return/pck.ads: New file.
        * gdb.ada/array_return/pck.adb: New file.
        * gdb.ada/array_return/p.adb: New file.
        * gdb.ada/array_return.exp: New testcase.

    * i386-tdep.c (i386_reg_struct_return_p): Allow array types as well.
        (i386_return_value): Add handling for functions that return array
        types.

    * ada-valprint.c (print_optional_low_bound): Handle properly
        cases where the array index type is a TYPE_CODE_RANGE.

    * valprint.c (val_print_array_elements): Check array size before
        computing its low bound. If zero, then use a default bound of zero.

*** empty log message ***

daily update

* configure.in (arm-*-linux-gnueabi): Add to noconfigdirs
target-libffi, target-qthreads, target-libjava, and
targetlibobjc.
* configure: Regenerate.

daily update

*** empty log message ***

* config/tc-hppa.c (strict): Don't initialize.  Update comment.
(pa_ip): Promote from PA 1.0 to 1.1 immediately when 1.1 match is
found.  Simplify handling of "ma" and "mb" completers.

* hppa.h (FLAG_STRICT): Revise comment.
(pa_opcode): Revise ordering rules.  Add/move strict pa10 variants
before corresponding pa11 opcodes.  Add strict pa10 register-immediate
entries for "fdc".

2005-10-08  Paul Brook  <paul@codesourcery.com>

bfd/
* elf32-arm.c: Move #include "elf/arm.h" after libbfd.h.
(NUM_KNOWN_ATTRIBUTES): Define.
(aeabi_attribute, aeabi_attribute_list): Define.
(elf32_arm_obj_tdata): Add known_eabi_attributes and
other_eabi_attributes.
(uleb128_size, is_default_attr, eabi_attr_size,
elf32_arm_eabi_attr_size, write_uleb128, write_eabi_attribute,
elf32_arm_set_eabi_attr_contents, elf32_arm_bfd_final_link,
elf32_arm_new_eabi_attr, attr_strdup, elf32_arm_add_eabi_attr_int,
elf32_arm_add_eabi_attr_compat, copy_eabi_attributes,
elf32_arm_merge_eabi_attributes): New functions.
(elf32_arm_copy_private_bfd_data): Copy EABI object attributes.
(elf32_arm_fake_sections): Handle .ARM.attributes.
(elf32_arm_parse_attributes): New function.
(elf32_arm_section_from_shdr): Use it.
(bfd_elf32_bfd_final_link): Define.
gas/
* config/tc-arm.c: Don't provide fallback default for CPU_DEFAULT.
(arm_arch_used, thumb_arch_used, selected_cpu, selected_cpu_name):
New variables.
(arm_cpu_option_table): Add canonical_name.
(arm_cpus): Populate canonical_name field.
(s_arm_eabi_attribute, s_arm_arch, s_arm_cpu, s_arm_fpu,
aeabi_set_public_attributes, arm_md_end): New functions.
(md_pseudo_table): Add "cpu", "arch", "fpu" and "eabi_attribute".
(md_assemble): Set thumb_arch_used and arm_arch_used.
(md_begin): Set defaut cpu if CPU_DEFAULT not defined.
* config/tc-arm.h (md_end): Define.
* doc/c-arm.texi: Document .cpu, .arch, .fpu and .eabi_attribute.
gas/testsuite/
* gas/arm/eabi_attr_1.s: New test.
* gas/arm/eabi_attr_1.d: New test.
* gas/arm/arm7t.d: Only disassemble code sections.
* gas/arm/bignum1.d: Ignore Arm object attribute sections.
* gas/arm/mapping.d: Ditto.
* gas/arm/unwind.d: Ditto.
* gas/elf/section0.d: Ditto.
* gas/elf/section1.d: Ditto.
* gas/elf/elf.exp: Set target_machine for Arm EABI based targets.
* gas/elf/section2.e-armeabi: New file.
include/elf/
* arm.h: Add prototypes for BFD object attribute routines.
ld/testsuite/
* ld-arm/arm-rel31.d: Ignore Arm object attribute sections.
* ld-arm/arm-target1-abs.d: Ditto.
* ld-arm/arm-target1-rel.d: Ditto.
* ld-arm/arm-target2-abs.d: Ditto.
* ld-arm/arm-target2-got-rel.d: Ditto.
* ld-arm/arm-target2-rel.d: Ditto.

2005-10-08  James Lemke  <jim@wasabisystems.com>

* arm-dis.c (coprocessor_opcodes): Fix mask for various Maverick CDP
operations.

daily update

*** empty log message ***

* at-file.texi: Fix typo.

*** empty log message ***

daily update

bfd/
* elf32-arm.c (elf32_arm_check_relocs): Avoid aliasing warnings from
GCC.
(elf32_arm_size_dynamic_sections): Likewise.
* ecofflink.c (bfd_ecoff_debug_one_external): Likewise.
* elf32-hppa.c (elf32_hppa_check_relocs): Likewise.
* elf32-m32r.c (m32r_elf_check_relocs): Likewise.
* elf32-m68k.c (elf_m68k_check_relocs): Likewise.
* elf32-ppc.c (ppc_elf_check_relocs): Likewise.
* elf32-s390.c (elf_s390_check_relocs): Likewise.
(elf_s390_size_dynamic_sections): Likewise.
* elf32-sh.c (sh_elf_check_relocs): Likewise.
* elf64-ppc.c (ppc64_elf_check_relocs, dec_dynrel_count)
(ppc64_elf_size_dynamic_sections): Likewise.
* elf64-s390.c (elf_s390_check_relocs): Likewise.
(elf_s390_size_dynamic_sections): Likewise.
* elfxx-mips.c (_bfd_mips_elf_finish_dynamic_sections): Likewise.
* elfxx-sparc.c (_bfd_sparc_elf_check_relocs): Likewise.
(_bfd_sparc_elf_size_dynamic_sections): Likewise.
* ieee.c (ieee_slurp_section_data): Likewise.
* oasys.c (oasys_slurp_section_data): Likewise.
opcodes/
* ppc-dis.c (struct dis_private): Remove.
(powerpc_dialect): Avoid aliasing warnings.
(print_insn_big_powerpc, print_insn_little_powerpc): Likewise.

* Makefile.def (flags_to_pass): Add OBJDUMP_FOR_TARGET.
* Makefile.tpl (BASE_TARGET_EXPORTS): Add OBJDUMP.
(OBJDUMP_FOR_TARGET, CONFIGURED_OBJDUMP_FOR_TARGET)
(USUAL_OBJDUMP_FOR_TARGET): New.
(EXTRA_TARGET_FLAGS): Add OBJDUMP.
* configure.in: Check for $OBJDUMP_FOR_TARGET.
* configure, Makefile: Regenerated.

PR 1659
* rs6000-tdep.c (rs6000_push_dummy_call): Correct size of
backchain write.
(rs6000_convert_from_func_ptr_addr): Correct comment.

*** empty log message ***

daily update

    * archive.c: Add missing SUBSECTION for documentation.
        * bfd.c: Likewise.
        * cache.c: Likewise.
        * corefile.c: Likewise.
        * format.c: Likewise.
        * init.c: Likewise.
        * libbfd.c: Likewise.
        * opncls.c: Likewise.
        * elf.c: Remove blank line after SECTION heading.
        * reloc.c: Change "howto manager" SECTION to a SUBSECTION.

2005-10-05  Paolo Bonzini  <bonzini@gnu.org>

* Makefile.tpl (all) [gcc-no-bootstrap]: Make prebootstrap packages
before other host packages.

2005-10-05  Paolo Bonzini  <bonzini@gnu.org>

PR bootstrap/22340

* configure.in (default_target): Remove.
* Makefile.tpl (all): Do not use prerequisites as subroutines
(all) [gcc-bootstrap]: Bootstrap gcc first if it was not done yet.
(do-[+make_target+], check, install, [+bootstrap_target+]): Do not
use prerequisites as subroutines.
(check-host, check-target): New.
(bootstrap configure & all targets): Do not use stage*-start
if the directory layout is already ok.
(non-bootstrap configure & all targets): Prepend a $(unstage).
(stage[+id+]-bubble): Do that here.  Do not use NOTPARALLEL.
(NOTPARALLEL): Remove.
(unstage, stage variables): New variables.
(unstage, stage targets): Simply expand to those variables.

* configure: Regenerate.
* Makefile.in: Regenerate.

Fix mips-elf --enable-libmudflap make -j2 failure.
* Makefile.def (lang_env_dependencies): Add libmudflap.
* Makefile.in: Regenerate.

*** empty log message ***

daily update

* elf32-arm.c (get_arm_elf_section_data): Cache the last pointer matched so
that the typical case of scanning for the previous section to last one can be
handled quickly.

* at-file.texi: New file.

    * MAINTAINERS: Add section for release management.

    * NEWS: Add entry for new "set print array-indexes" command.

daily update

*** empty log message ***

    * gdb.texinfo (Print Settings): Add documentation for set/show
        print array-indexes.

* elf32-xtensa.c (relocations_reach): Skip range check for
absolute literals.

    * gdb.base/arrayidx.c: New file.
        * gdb.base/arrayidx.exp: New testcase.

2005-10-03  Joel Brobecker  <brobecker@adacore.com>

        * language.h (language_defn): New field la_print_array_index.
        (LA_PRINT_ARRAY_INDEX): New macro.
        (default_print_array_index): Add declaration.
        * language.c (default_print_array_index): new function.
        (unknown_language): Add value for new field.
        (auto_language): Likewise.
        (local_language): Likewise.
        * ada-lang.c (ada_print_array_index): New function.
        (ada_language_defn): Add value for new field.
        * c-lang.c (c_language_defn): Likewise.
        (cpluc_language_defn): Likewise.
        (asm_language_defn): Likewise.
        (minimal_language_defn): Likewise.
        * f-lang.c (f_language_defn): Likewise.
        * jv-lang.c (java_language_defn): Likewise.
        * m2-lang.c (m2_language_defn): Likewise.
        * objc-lang.c (objc_language_defn): Likewise.
        * p-lang.c (pascal_language_defn): Likewise.
        * scm-lang.c (scm_language_defn): Likewise.
        * valprint.h (print_array_indexes_p): Add declaration.
        (get_array_low_bound): Add declaration.
        (maybe_print_array_index): Add declaration.
        * valprint.c (print_array_indexes): New static variable.
        (show_print_array_indexes): New function.
        (print_array_indexes_p): New function.
        (get_array_low_bound): New function.
        (maybe_print_array_index): New function.
        (val_print_array_elements): Print the index of each element if
        requested by the user.
        (_initialize_valprint): Add new array-indexes "set/show print" command.
        * ada-valprint.c (print_optional_low_bound): Replace extracted code
        by call to ada_get_array_low_bound_and_type(). Stop printing the low
        bound if indexes will be printed for all elements of the array.
        (val_print_packed_array_elements): Print the index of each element
        of the array if necessary.

    * hppa-tdep.c (read_unwind_info): Fix typo in comment.

Regenerated with 2.13 version of autoconf.

* configure.in (bfin-*-*): Support bfin.
* configure: Regenerated.

oops - delayed commit for addtion of Irish translation for gprof and opcodes

* elf.c (_bfd_elf_get_synthetic_symtab): Set BSF_GLOBAL on
synthetic syms.

daily update

*** empty log message ***

* gdb_gcore.sh: Use a temporary file.  Use gdb from $PATH.

*** empty log message ***

daily update

*** empty log message ***

2005-09-30  H.J. Lu  <hongjiu.lu@intel.com>

* Makefile.am: Run "make dep-am".
* Makefile.in: Regenerated.
* aclocal.m4: Likewise.

2005-09-30  H.J. Lu  <hongjiu.lu@intel.com>

* Makefile.am: Run "make dep-am".
* Makefile.in: Regenerated.
* aclocal.m4: Likewise.
* configure: Likewise.

* Makefile.am: Bfin support.
* Makefile.in: Regenerated.
* aclocal.m4: Regenerated.
* archures.c (bfd_mach_bfin): New.
(bfd_arch_bfin): New.
bfd-in.h (bfd_bfin_elf32_create_embedded_relocs): New.
* bfd-in2.h: Regenerated.
* config.bfd: Bfin support.
* configure: Regenerated.
* configure.in: Bfin support.
* libbfd.h: Regenerated.
* reloc.c: Add BFD relocations for Bfin.
* targets.c (bfd_elf32_bfin_vec): New.
* cpu-bfin.c: New file.
* elf32-bfin.c: New file.

* Makefile.am: Bfin support.
* Makefile.in: Regenerated.
* aclocal.m4: Regenerated.
* bfin-dis.c: New file.
* configure.in: Bfin support.
* configure: Regenerated.
* disassemble.c (ARCH_bfin): Define.
(disassembler): Add case for bfd_arch_bfin.

* dis-asm.h (print_insn_bfin): Declare.
* elf/bfin.h: New file.
* elf/common.h (EM_BLACKFIN): Define.
* opcode/bfin.h: New file.

2005-09-30  H.J. Lu  <hongjiu.lu@intel.com>

* configure.in (*-*-darwin*): Build bfd, binutils and opcodes.
* configure: Regenerated.

* elf64-ppc.c (ppc_type_of_stub): Check both func desc and func
entry sym before deciding no stub is needed.
(ppc64_elf_size_stubs): When calculating branch destination,
don't use func desc sym for old ABI objects unless func entry
is undefined.

*** empty log message ***

daily update

PR threads/2015
* infrun.c (adjust_pc_after_break): Don't use the state from a
non-matching thread context.

* rs6000-tdep.c (rs6000_frame_cache): Handle misdetected frameless
functions.

Index: ChangeLog
2005-09-28  Geoffrey Keating  <geoffk@apple.com>

* Makefile.tpl (BASE_TARGET_EXPORTS): Add LIPO, STRIP.
(LIPO_FOR_TARGET): New.
(CONFIGURED_LIPO_FOR_TARGET): New.
(USUAL_LIPO_FOR_TARGET): New.
(STRIP_FOR_TARGET): New.
(CONFIGURED_STRIP_FOR_TARGET): New.
(USUAL_STRIP_FOR_TARGET): New.
* Makefile.def (flags_to_pass): Add LIPO_FOR_TARGET and
STRIP_FOR_TARGET.
* configure.in: Set LIPO_FOR_TARGET, STRIP_FOR_TARGET,
CONFIGURED_LIPO_FOR_TARGET, CONFIGURED_STRIP_FOR_TARGET.
* Makefile.in: Regenerate.
* configure.in: Regenerate.

Index: gcc/ChangeLog
2005-09-28  Geoffrey Keating  <geoffk@apple.com>

* Makefile.in: Export LIPO_FOR_TARGET, STRIP_FOR_TARGET.
(stage1-start): Delete old libgcc and libunwind before moving
anything into the stage directory.
(stage2-start): Likewise.
(stage3-start): Likewise.
(stage4-start): Likewise.
(stageprofile-start): Likewise.
(stagefeedback-start): Likewise.
* config.gcc (*-*-darwin*): Automatically use CPU-specific darwin.h
header in tm_file and CPU-specific t-darwin in tmake_file.
(i[34567]86-*-darwin*): Don't change tm_file.
(powerpc-*-darwin*): Don't change tm_file or tmake_file.
* config/darwin.h (REAL_LIBGCC_SPEC): Rewrite to use proper libgcc
shared library stub for target OS version.
* config/t-slibgcc-darwin (SHLIB_SOLINK): Delete.
(SHLIB_LINK): Don't make SHLIB_SOLINK.
(SHLIB_INSTALL): Don't install SHLIB_SOLINK.
(libgcc_s.%.dylib): New.
(LIBGCC): Define.
(install-darwin-libgcc-stubs): New.
(INSTALL_LIBGCC): New append.
* config/i386/darwin-libgcc.10.4.ver: New.
* config/i386/darwin-libgcc.10.5.ver: New.
* config/i386/t-darwin: New.
* config/rs6000/darwin-libgcc.10.4.ver: New.
* config/rs6000/darwin-libgcc.10.5.ver: New.
* config/rs6000/darwin.h (REAL_LIBGCC_SPEC): Delete.
* config/rs6000/t-darwin (SHLIB_VERPFX): Define.

*** empty log message ***

daily update

* annotate.c (breakpoints_changed, annotate_frames_invalid)
(_initialize_annotate): Print breakpoints-invalid and
frames-invalid for level 2 annotations only.

* gdb.base/annota3.exp, gdb.cp/annota3.exp: The annotations
frames-invalid and breakpoints-invalid are no longer generated
with level 3 so don't expect them in the output.

*** empty log message ***

* infrun.c (init_execution_control_state): Initialize
ecs->another_trap.