clk: fix a panic error caused by accessing NULL pointer

[ Upstream commit 975b820b6836b6b6c42fb84cd2e772e2b41bca67 ]

In some cases the clock parent would be set NULL when doing re-parent,
it will cause a NULL pointer accessing if clk_set trace event is
enabled.

This patch sets the parent as "none" if the input parameter is NULL.

Fixes: dfc202ead312 (clk: Add tracepoints for hardware operations)
Signed-off-by: Cai Li <cai.li@spreadtrum.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: xt_bpf: add overflow checks

[ Upstream commit 6ab405114b0b229151ef06f4e31c7834dd09d0c0 ]

Check whether inputs from userspace are too long (explicit length field too
big or string not null-terminated) to avoid out-of-bounds reads.

As far as I can tell, this can at worst lead to very limited kernel heap
memory disclosure or oopses.

This bug can be triggered by an unprivileged user even if the xt_bpf module
is not loaded: iptables is available in network namespaces, and the xt_bpf
module can be autoloaded.

Triggering the bug with a classic BPF filter with fake length 0x1000 causes
the following KASAN report:

==================================================================
BUG: KASAN: slab-out-of-bounds in bpf_prog_create+0x84/0xf0
Read of size 32768 at addr ffff8801eff2c494 by task test/4627

CPU: 0 PID: 4627 Comm: test Not tainted 4.15.0-rc1+ #1
[...]
Call Trace:
 dump_stack+0x5c/0x85
 print_address_description+0x6a/0x260
 kasan_report+0x254/0x370
 ? bpf_prog_create+0x84/0xf0
 memcpy+0x1f/0x50
 bpf_prog_create+0x84/0xf0
 bpf_mt_check+0x90/0xd6 [xt_bpf]
[...]
Allocated by task 4627:
 kasan_kmalloc+0xa0/0xd0
 __kmalloc_node+0x47/0x60
 xt_alloc_table_info+0x41/0x70 [x_tables]
[...]
The buggy address belongs to the object at ffff8801eff2c3c0
                which belongs to the cache kmalloc-2048 of size 2048
The buggy address is located 212 bytes inside of
                2048-byte region [ffff8801eff2c3c0, ffff8801eff2cbc0)
[...]
==================================================================

Fixes: e6f30c731718 ("netfilter: x_tables: add xt_bpf match")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfrm: Fix xfrm_input() to verify state is valid when (encap_type < 0)

[ Upstream commit 4ce3dbe397d7b6b15f272ae757c78c35e9e4b61d ]

Code path when (encap_type < 0) does not verify the state is valid
before progressing.

This will result in a crash if, for instance, x->km.state ==
XFRM_STATE_ACQ.

Fixes: 7785bba299a8 ("esp: Add a software GRO codepath")
Signed-off-by: Aviv Heller <avivh@mellanox.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: at_hdmac: fix potential NULL pointer dereference in atc_prep_dma_interleaved

[ Upstream commit 62a277d43d47e74972de44d33bd3763e31992414 ]

_xt_ is being dereferenced before it is null checked, hence there is a
potential null pointer dereference.

Fix this by moving the pointer dereference after _xt_ has been null
checked.

This issue was detected with the help of Coccinelle.

Fixes: 4483320e241c ("dmaengine: Use Pointer xt after NULL check.")
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: ioat: Fix error handling path

[ Upstream commit 5c9afbda911ce20b3f2181d1e440a0222e1027dd ]

If the last test in 'ioat_dma_self_test()' fails, we must release all
the allocated resources and not just part of them.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: bfa: fix type conversion warning

commit 48d83282db077f93b2cf40de120f4d6f29eb293b upstream.

A regression fix introduced a harmless type mismatch warning:

drivers/scsi/bfa/bfad_bsg.c: In function 'bfad_im_bsg_vendor_request':
drivers/scsi/bfa/bfad_bsg.c:3137:35: error: initialization of 'struct bfad_im_port_s *' from 'long unsigned int' makes pointer from integer without a cast [-Werror=int-conversion]
  struct bfad_im_port_s *im_port = shost->hostdata[0];
                                   ^~~~~
drivers/scsi/bfa/bfad_bsg.c: In function 'bfad_im_bsg_els_ct_request':
drivers/scsi/bfa/bfad_bsg.c:3353:35: error: initialization of 'struct bfad_im_port_s *' from 'long unsigned int' makes pointer from integer without a cast [-Werror=int-conversion]
  struct bfad_im_port_s *im_port = shost->hostdata[0];

This changes the code back to shost_priv() once more, but encapsulates
it in an inline function to document the rather unusual way of
using the private data only as a pointer to the previously allocated
structure.

I did not try to get rid of the extra indirection level entirely,
which would have been rather invasive and required reworking the entire
initialization sequence.

Fixes: 45349821ab3a ("scsi: bfa: fix access to bfad_im_port_s")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Sasha Levin <Alexander.Levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: bfa: fix access to bfad_im_port_s

[ Upstream commit 45349821ab3a8d378b8f37e52c6fe1aa1b870c47 ]

Commit 'cd21c605b2cf ("scsi: fc: provide fc_bsg_to_shost() helper")'
changed access to bfa's 'struct bfad_im_port_s' by using shost_priv()
instead of shost->hostdata[0].

This lead to crashes like in the following back-trace:

task: ffff880046375300 ti: ffff8800a2ef8000 task.ti: ffff8800a2ef8000
RIP: e030:[<ffffffffa04c8252>]  [<ffffffffa04c8252>] bfa_fcport_get_attr+0x82/0x260 [bfa]
RSP: e02b:ffff8800a2efba10  EFLAGS: 00010046
RAX: 575f415441536432 RBX: ffff8800a2efba28 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff8800a2efba28 RDI: ffff880004dc31d8
RBP: ffff880004dc31d8 R08: 0000000000000000 R09: 0000000000000001
R10: ffff88011fadc468 R11: 0000000000000001 R12: ffff880004dc31f0
R13: 0000000000000200 R14: ffff880004dc61d0 R15: ffff880004947a10
FS:  00007feb1e489700(0000) GS:ffff88011fac0000(0000) knlGS:0000000000000000
CS:  e033 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00007ffe14e46c10 CR3: 00000000957b8000 CR4: 0000000000000660
Stack:
 ffff88001d4da000 ffff880004dc31c0 ffffffffa048a9df ffffffff81e56380
 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[] bfad_iocmd_ioc_get_info+0x4f/0x220 [bfa]
[] bfad_iocmd_handler+0xa00/0xd40 [bfa]
[] bfad_im_bsg_request+0xee/0x1b0 [bfa]
[] fc_bsg_dispatch+0x10b/0x1b0 [scsi_transport_fc]
[] bsg_request_fn+0x11d/0x1c0
[] __blk_run_queue+0x2f/0x40
[] blk_execute_rq_nowait+0xa8/0x160
[] blk_execute_rq+0x77/0x120
[] bsg_ioctl+0x1b6/0x200
[] do_vfs_ioctl+0x2cd/0x4a0
[] SyS_ioctl+0x74/0x80
[] entry_SYSCALL_64_fastpath+0x12/0x6d

Fixes: cd21c605b2cf ("scsi: fc: provide fc_bsg_to_shost() helper")
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: lpfc: Use after free in lpfc_rq_buf_free()

[ Upstream commit 9816ef6ecbc102b9bcbb1d83e12c7fb19924f38c ]

The error message dereferences "rqb_entry" so we need to print it first
and then free the buffer.

Fixes: 6c621a2229b0 ("scsi: lpfc: Separate NVMET RQ buffer posting from IO resources SGL/iocbq/context")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gianfar: Disable EEE autoneg by default

[ Upstream commit b6b5e8a691185606dfffff3198c89e3b4fd9d4f6 ]

This controller does not support EEE, but it may connect to a PHY
which supports EEE and advertises EEE by default, while its link
partner also advertises EEE. If this happens, the PHY enters low
power mode when the traffic rate is low and causes packet loss.
This patch disables EEE advertisement by default for any PHY that
gianfar connects to, to prevent the above unwanted outcome.

Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com>
Tested-by: Yangbo Lu <Yangbo.lu@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

509: fix printing uninitialized stack memory when OID is empty

[ Upstream commit 8dfd2f22d3bf3ab7714f7495ad5d897b8845e8c1 ]

Callers of sprint_oid() do not check its return value before printing
the result.  In the case where the OID is zero-length, -EBADMSG was
being returned without anything being written to the buffer, resulting
in uninitialized stack memory being printed.  Fix this by writing
"(bad)" to the buffer in the cases where -EBADMSG is returned.

Fixes: 4f73175d0375 ("X.509: Add utility functions to render OIDs as strings")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: mv88e6xxx: Unregister MDIO bus on error path

[ Upstream commit 3126aeec5313565bfa19e2dd8fd7e3c3390514cb ]

The MDIO busses need to be unregistered before they are freed,
otherwise BUG() is called. Add a call to the unregister code if the
registration fails, since we can have multiple busses, of which some
may correctly register before one fails. This requires moving the code
around a little.

Fixes: a3c53be55c95 ("net: dsa: mv88e6xxx: Support multiple MDIO busses")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: mv88e6xxx: Fix interrupt masking on removal

[ Upstream commit 3d5fdba1842bdd2eef29364c660558cb4cbb3fe0 ]

When removing the interrupt handling code, we should mask the
generation of interrupts. The code however unmasked all
interrupts. This can then cause a new interrupt. We then get into a
deadlock where the interrupt thread is waiting to run, and the code
continues, trying to remove the interrupt handler, which means waiting
for the thread to complete. On a UP machine this deadlocks.

Fix so we really mask interrupts in the hardware. The same error is
made in the error path when install the interrupt handling code.

Fixes: 3460a5770ce9 ("net: dsa: mv88e6xxx: Mask g1 interrupts and free interrupt")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ethernet: arc: fix error handling in emac_rockchip_probe

[ Upstream commit e46772a6946a7d1f3fbbc1415871851d6651f1d4 ]

If clk_set_rate() fails, we should disable clk before return.
Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Branislav Radocaj <branislav@radocaj.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virtio_net: fix return value check in receive_mergeable()

[ Upstream commit 03e9f8a05bce7330bcd9c5cc54c8e42d0fcbf993 ]

The function virtqueue_get_buf_ctx() could return NULL, the return
value 'buf' need to be checked with NULL, not value 'ctx'.

Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

brcmfmac: Avoid build error with make W=1

[ Upstream commit 51ef7925e10688c57186d438e784532e063492e4 ]

When I run make W=1 on gcc (Debian 7.2.0-16) 7.2.0 I got an error for
the first run, all next ones are okay.

  CC [M]  drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.o
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:2078: error: Cannot parse struct or union!
scripts/Makefile.build:310: recipe for target 'drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.o' failed

Seems like something happened with W=1 and wrong kernel doc format.
As a quick fix remove dubious /** in the code.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: Fix possible off-by-one in btrfs_search_path_in_tree

[ Upstream commit c8bcbfbd239ed60a6562964b58034ac8a25f4c31 ]

The name char array passed to btrfs_search_path_in_tree is of size
BTRFS_INO_LOOKUP_PATH_MAX (4080). So the actual accessible char indexes
are in the range of [0, 4079]. Currently the code uses the define but this
represents an off-by-one.

Implications:

Size of btrfs_ioctl_ino_lookup_args is 4096, so the new byte will be
written to extra space, not some padding that could be provided by the
allocator.

btrfs-progs store the arguments on stack, but kernel does own copy of
the ioctl buffer and the off-by-one overwrite does not affect userspace,
but the ending 0 might be lost.

Kernel ioctl buffer is allocated dynamically so we're overwriting
somebody else's memory, and the ioctl is privileged if args.objectid is
not 256. Which is in most cases, but resolving a subvolume stored in
another directory will trigger that path.

Before this patch the buffer was one byte larger, but then the -1 was
not added.

Fixes: ac8e9819d71f907 ("Btrfs: add search and inode lookup ioctls")
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ added implications ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: disable FUA if mounted with nobarrier

[ Upstream commit 1b9e619c5bc8235cfba3dc4ced2fb0e3554a05d4 ]

I was seeing disk flushes still happening when I mounted a Btrfs
filesystem with nobarrier for testing. This is because we use FUA to
write out the first super block, and on devices without FUA support, the
block layer translates FUA to a flush. Even on devices supporting true
FUA, using FUA when we asked for no barriers is surprising.

Fixes: 387125fc722a8ed ("Btrfs: fix barrier flushes")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: Fix quota reservation leak on preallocated files

[ Upstream commit b430b7751286b3acff2d324553c8cec4f1e87764 ]

Commit c6887cd11149 ("Btrfs: don't do nocow check unless we have to")
changed the behavior of __btrfs_buffered_write() so that it first tries
to get a data space reservation, and then skips the relatively expensive
nocow check if the reservation succeeded.

If we have quotas enabled, the data space reservation also includes a
quota reservation.  But in the rewrite case, the space has already been
accounted for in qgroups.  So btrfs_check_data_free_space() increases
the quota reservation, but it never gets decreased when the data
actually gets written and overwrites the pre-existing data.  So we're
left with both the qgroup and qgroup reservation accounting for the same
space.

This commit adds the missing btrfs_qgroup_free_data() call in the case
of BTRFS_ORDERED_PREALLOC extents.

Fixes: c6887cd11149 ("Btrfs: don't do nocow check unless we have to")
Signed-off-by: Justin Maggard <jmaggard@netgear.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

locking/lockdep: Fix possible NULL deref

[ Upstream commit 5e351ad106997e06b2dc3da9c6b939b95f67fb88 ]

We can't invalidate xhlocks when we've not yet allocated any.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Fixes: f52be5708076 ("locking/lockdep: Untangle xhlock history save/restore from task independence")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: qualcomm: rmnet: Fix leak on transmit failure

[ Upstream commit c20a548792f15f8d8e38cd74356301c6db0d241f ]

If a skb in transmit path does not have sufficient headroom to add
the map header, the skb is not sent out and is never freed.

Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation")
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: VMX: fix page leak in hardware_setup()

[ Upstream commit 2895db67b01cb875457c9c3f30a14723b6b5dfd5 ]

vmx_io_bitmap_b should not be allocated twice.

Fixes: 23611332938d ("KVM: VMX: refactor setup of global page-sized bitmaps")
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

VSOCK: fix outdated sk_state value in hvs_release()

[ Upstream commit c9d3fe9da094a9a7a3d3cd365b334b822e05f5e8 ]

Since commit 3b4477d2dcf2709d0be89e2a8dced3d0f4a017f2 ("VSOCK: use TCP
state constants for sk_state") VSOCK has used TCP_* constants for
sk_state.

Commit b4562ca7925a3bedada87a3dd072dd5bad043288 ("hv_sock: add locking
in the open/close/release code paths") reintroduced the SS_DISCONNECTING
constant.

This patch replaces the old SS_DISCONNECTING with the new TCP_CLOSING
constant.

CC: Dexuan Cui <decui@microsoft.com>
CC: Cathy Avery <cavery@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net_sched: red: Avoid illegal values

[ Upstream commit 8afa10cbe281b10371fee5a87ab266e48d71a7f9 ]

Check the qmin & qmax values doesn't overflow for the given Wlog value.
Check that qmin <= qmax.

Fixes: a783474591f2 ("[PKT_SCHED]: Generic RED layer")
Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net_sched: red: Avoid devision by zero

[ Upstream commit 5c472203421ab4f928aa1ae9e1dbcfdd80324148 ]

Do not allow delta value to be zero since it is used as a divisor.

Fixes: 8af2a218de38 ("sch_red: Adaptative RED AQM")
Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gianfar: fix a flooded alignment reports because of padding issue.

[ Upstream commit 58117672943734715bbe7565ac9f062effa524f0 ]

According to LS1021A RM, the value of PAL can be set so that the start of the
IP header in the receive data buffer is aligned to a 32-bit boundary. Normally,
setting PAL = 2 provides minimal padding to ensure such alignment of the IP
header.

However every incoming packet's 8-byte time stamp will be inserted into the
packet data buffer as padding alignment bytes when hardware time stamping is
enabled.

So we set the padding 8+2 here to avoid the flooded alignment faults:

root@128:~# cat /proc/cpu/alignment
User:           0
System:         17539 (inet_gro_receive+0x114/0x2c0)
Skipped:        0
Half:           0
Word:           0
DWord:          0
Multi:          17539
User faults:    2 (fixup)

Also shown when exception report enablement

CPU: 0 PID: 161 Comm: irq/66-eth1_g0_ Not tainted 4.1.21-rt13-WR8.0.0.0_preempt-rt #16
Hardware name: Freescale LS1021A
[<8001b420>] (unwind_backtrace) from [<8001476c>] (show_stack+0x20/0x24)
[<8001476c>] (show_stack) from [<807cfb48>] (dump_stack+0x94/0xac)
[<807cfb48>] (dump_stack) from [<80025d70>] (do_alignment+0x720/0x958)
[<80025d70>] (do_alignment) from [<80009224>] (do_DataAbort+0x40/0xbc)
[<80009224>] (do_DataAbort) from [<80015398>] (__dabt_svc+0x38/0x60)
Exception stack(0x86ad1cc0 to 0x86ad1d08)
1cc0: f9b3e080 86b3d072 2d78d287 00000000 866816c0 86b3d05e 86e785d0 00000000
1ce0: 00000011 0000000e 80840ab0 86ad1d3c 86ad1d08 86ad1d08 806d7fc0 806d806c
1d00: 40070013 ffffffff
[<80015398>] (__dabt_svc) from [<806d806c>] (inet_gro_receive+0x114/0x2c0)
[<806d806c>] (inet_gro_receive) from [<80660eec>] (dev_gro_receive+0x21c/0x3c0)
[<80660eec>] (dev_gro_receive) from [<8066133c>] (napi_gro_receive+0x44/0x17c)
[<8066133c>] (napi_gro_receive) from [<804f0538>] (gfar_clean_rx_ring+0x39c/0x7d4)
[<804f0538>] (gfar_clean_rx_ring) from [<804f0bf4>] (gfar_poll_rx_sq+0x58/0xe0)
[<804f0bf4>] (gfar_poll_rx_sq) from [<80660b10>] (net_rx_action+0x27c/0x43c)
[<80660b10>] (net_rx_action) from [<80033638>] (do_current_softirqs+0x1e0/0x3dc)
[<80033638>] (do_current_softirqs) from [<800338c4>] (__local_bh_enable+0x90/0xa8)
[<800338c4>] (__local_bh_enable) from [<8008025c>] (irq_forced_thread_fn+0x70/0x84)
[<8008025c>] (irq_forced_thread_fn) from [<800805e8>] (irq_thread+0x16c/0x244)
[<800805e8>] (irq_thread) from [<8004e490>] (kthread+0xe8/0x104)
[<8004e490>] (kthread) from [<8000fda8>] (ret_from_fork+0x14/0x2c)

Signed-off-by: Zumeng Chen <zumeng.chen@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfp: fix port stats for mac representors

[ Upstream commit 42d779ffc186f6dd26271fc60a7417cb51aca93e ]

Previously we swapped the tx_packets, tx_bytes and tx_dropped counters
with rx_packets, rx_bytes and rx_dropped counters, respectively. This
behaviour is correct and expected for VF representors but it should not
be swapped for physical port mac representors.

Fixes: eadfa4c3be99 ("nfp: add stats and xmit helpers for representors")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: Fix elm interrupt compiler warning

[ Upstream commit d364b038bc962f494cffb8f6cb6cddbe41bcb5b6 ]

Looks like the interrupt property is missing the controller and level
information causing:

Warning (interrupts_property): interrupts size is (4), expected multiple
of 12 in /ocp/elm@48078000

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/dasd: prevent prefix I/O error

[ Upstream commit da340f921d3454f1521671c7a5a43ad3331fbe50 ]

Prevent that a prefix flag is set based on invalid configuration data.
The validity.verify_base flag should only be set for alias devices.
Usually the unit address type is either one of base, PAV alias or
HyperPAV alias. But in cases where the unit address type is not set or
any other value the validity.verify_base flag might be set as well.
This would lead to follow on errors.
Explicitly check for alias devices and set the validity flag only for
them.

Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/virtio: add BSD license to virtio-ccw

[ Upstream commit edfb8d8fcb94a75b2e61c63549d4a5f6474ad3d2 ]

The original intent of the virtio header relicensing
from 2008 was to make sure anyone can implement compatible
devices/drivers. The virtio-ccw was omitted by mistake.

We have an ack from the only contributor as well as the
maintainer from IBM, so it's not too late to fix that.

Make it dual-licensed with GPLv2, as the whole kernel is GPL2.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM / runtime: Fix handling of suppliers with disabled runtime PM

[ Upstream commit 31eb7431805493e10f4731f366cf4d4e3e952035 ]

Prevent rpm_get_suppliers() from returning an error code if runtime
PM is disabled for one or more of the supplier devices it wants to
runtime-resume, so as to make runtime PM work for devices with links
to suppliers that don't use runtime PM (such links may be created
during device enumeration even before it is known whether or not
runtime PM will be enabled for the devices in question, for example).

Fixes: 21d5c57b3726 (PM / runtime: Use device links)
Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Tested-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/perf: Fix oops when grouping different pmu events

[ Upstream commit 5aa04b3eb6fca63d2e9827be656dcadc26d54e11 ]

When user tries to group imc (In-Memory Collections) event with
normal event, (sometime) kernel crashes with following log:

    Faulting instruction address: 0x00000000
    [link register   ] c00000000010ce88 power_check_constraints+0x128/0x980
    ...
    c00000000010e238 power_pmu_event_init+0x268/0x6f0
    c0000000002dc60c perf_try_init_event+0xdc/0x1a0
    c0000000002dce88 perf_event_alloc+0x7b8/0xac0
    c0000000002e92e0 SyS_perf_event_open+0x530/0xda0
    c00000000000b004 system_call+0x38/0xe0

'event_base' field of 'struct hw_perf_event' is used as flags for
normal hw events and used as memory address for imc events. While
grouping these two types of events, collect_events() tries to
interpret imc 'event_base' as a flag, which causes a corruption
resulting in a crash.

Consider only those events which belongs to 'perf_hw_context' in
collect_events().

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Reviewed-By: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

m68k: add missing SOFTIRQENTRY_TEXT linker section

[ Upstream commit 969de0988b77e5a57aac2f7270191a3c50540c52 ]

Commit be7635e7287e ("arch, ftrace: for KASAN put hard/soft IRQ entries
into separate sections") added a new linker section, SOFTIRQENTRY_TEXT,
to the linker scripts for most architectures. It didn't add it to any of
the linker scripts for the m68k architecture. This was not really a problem
because it is only defined if either of CONFIG_FUNCTION_GRAPH_TRACER or
CONFIG_KASAN are enabled - which can never be true for m68k.

However commit 229a71860547 ("irq: Make the irqentry text section
unconditional") means that SOFTIRQENTRY_TEXT is now always defined. So on
m68k we now end up with a separate ELF section for .softirqentry.text
instead of it being part of the .text section. On some m68k targets in some
configurations this can also cause a fatal link error:

  LD      vmlinux
/usr/local/bin/../m68k-uclinux/bin/ld.real: section .softirqentry.text loaded at [0000000010de10c0,0000000010de12dd] overlaps section .rodata loaded at [0000000010de10c0,0000000010e0fd67]

To fix add in the missing SOFTIRQENTRY_TEXT section into the m68k linker
scripts. I noticed that m68k is also missing the IRQENTRY_TEXT section,
so this patch also adds an entry for that too.

Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipvlan: Add the skb->mark as flow4's member to lookup route

[ Upstream commit a98a4ebc8c61d20f0150d6be66e0e65223a347af ]

Current codes don't use skb->mark to assign flowi4_mark, it would
make the policy route rule with fwmark doesn't work as expected.

Signed-off-by: Gao Feng <gfree.wind@vip.163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bnxt_en: Need to unconditionally shut down RoCE in bnxt_shutdown

[ Upstream commit a7f3f939dd7d8398acebecd1ceb2e9e7ffbe91d2 ]

The current 'bnxt_shutdown' implementation only invokes
'bnxt_ulp_shutdown' to shut down RoCE in the case when the system is in
the path of power off (SYSTEM_POWER_OFF). While this may work in most
cases, it does not work in the smart NIC case, when Linux 'reboot'
command is initiated from the Linux that runs on the ARM cores of the
NIC card. In this particular case, Linux 'reboot' results in a system
'L3' level reset where the entire ARM and associated subsystems are
being reset, but at the same time, Nitro core is being kept in sane state
(to allow external PCIe connected servers to continue to work). Without
properly shutting down RoCE and freeing all associated resources, it
results in the ARM core to hang immediately after the 'reboot'

By always invoking 'bnxt_ulp_shutdown' in 'bnxt_shutdown', it fixes the
above issue

Fixes: 0efd2fc65c92 ("bnxt_en: Add a callback to inform RDMA driver during PCI shutdown.")

Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scripts/kernel-doc: Don't fail with status != 0 if error encountered with -none

[ Upstream commit e814bccbafece52a24e152d2395b5d49eef55841 ]

My bisect scripts starting running into build failures when trying to
compile 4.15-rc1 with the builds failing with things like:

drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:2078: error: Cannot parse struct or union!

The line in question is actually just a #define, but after some digging
it turns out that my scripts pass W=1 and since commit 3a025e1d1c2ea
("Add optional check for bad kernel-doc comments") that results in
kernel-doc running on each source file. The file in question has a
badly formatted comment immediately before the #define:

/**
 * struct brcmf_skbuff_cb reserves first two bytes in sk_buff::cb for
 * bus layer usage.
 */

which causes the regex in dump_struct to fail (lack of braces following
struct declaration) and kernel-doc returns 1, which causes the build
to fail.

Fix the issue by always returning 0 from kernel-doc when invoked with
-none. It successfully generates no documentation, and prints out any
issues.

Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: fix kernel-doc build errors

[ Upstream commit c175cb7cd953782bbf4e8bdf088ad61440d6dde5 ]

Fix build errors in kernel-doc notation. Symbols that end in '_'
have a special meaning, but adding a '*' makes them OK.

../drivers/iio/industrialio-core.c:635: ERROR: Unknown target name: "iio_val".
../drivers/iio/industrialio-core.c:642: ERROR: Unknown target name: "iio_val".

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: proximity: sx9500: Assign interrupt from GpioIo()

[ Upstream commit e53111ad5deaef98d8c18a9933ef1f5624c5979d ]

The commit 0f0796509c07

("iio: remove gpio interrupt probing from drivers that use a single interrupt")

removed custom IRQ assignment for the drivers which are enumerated via
ACPI or OF. Unfortunately, some ACPI tables have IRQ line defined as
GpioIo() resource and thus automatic IRQ allocation will fail.

Partially revert the commit 0f0796509c07 to restore original behaviour.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md/raid1/10: add missed blk plug

[ Upstream commit 18022a1bd3709b74ca31ef0b28fccd52bcd6c504 ]

flush_pending_writes isn't always called with block plug, so add it, and plug
works in nested way.

Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phylink: ensure we take the link down when phylink_stop() is called

[ Upstream commit 2012b7d6b2868c532f22d9172c8b24611637eb48 ]

Ensure that we tell the MAC to take the link down when phylink_stop()
is called, and that this completes prior to phylink_stop() returns.

Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sfp: fix RX_LOS signal handling

[ Upstream commit acf1c02f023926b8b04672a9e81b1711ae681619 ]

The options word is a be16 quantity, so we need to test the flags
having converted the endian-ness.  Convert the flag bits to be16,
which can be optimised by the compiler, rather than converting a
variable at runtime.

Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: only update outstanding_bytes for transmitted queue when doing prsctp_prune

[ Upstream commit d30fc5126efb0c33b7adf5966d3051db2c3d7721 ]

Now outstanding_bytes is only increased when appending chunks into one
packet and sending it at 1st time, while decreased when it is about to
move into retransmit queue. It means outstanding_bytes value is already
decreased for all chunks in retransmit queue.

However sctp_prsctp_prune_sent is a common function to check the chunks
in both transmitted and retransmit queue, it decrease outstanding_bytes
when moving a chunk into abandoned queue from either of them.

It could cause outstanding_bytes underflow, as it also decreases it's
value for the chunks in retransmit queue.

This patch fixes it by only updating outstanding_bytes for transmitted
queue when pruning queues for prsctp prio policy, the same fix is also
needed in sctp_check_transmitted.

Fixes: 8dbdf1f5b09c ("sctp: implement prsctp PRIO policy")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md/raid5: correct degraded calculation in raid5_error

[ Upstream commit aff69d89bdebc39235cddb4445371eb979b49685 ]

When disk failure occurs on new disks for reshape, mddev->degraded
is not calculated correctly. Faulty bit of the failure device is not
set before raid5_calc_degraded(conf).

mdadm --create /dev/md0 --level=5 --raid-devices=3 /dev/loop[012]
mdadm /dev/md0 -a /dev/loop3
mdadm /dev/md0 --grow -n4
mdadm /dev/md0 -f /dev/loop3 # simulating disk failure

cat /sys/block/md0/md/degraded # it outputs 0, but it should be 1.

However, mdadm -D /dev/md0 will show that it is degraded. It's a bug.
It can be fixed by moving the resources raid5_calc_degraded() depends
on before it.

Reported-by: Roy Chung <roychung@synology.com>
Reviewed-by: Alex Wu <alexwu@synology.com>
Signed-off-by: BingJing Chang <bingjingc@synology.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/core: Init subsys if compiled to vmlinuz-core

[ Upstream commit a9cd1a673737dd81332fce1145801bfacfb90d90 ]

Once infiniband is compiled as a core component its subsystem must be
enabled before device initialization. Otherwise there is a NULL pointer
dereference during mlx4_core init, calltrace:
->device_add
  if (dev->class) {
     deref  dev->class->p =>NULLPTR

#Config
CONFIG_NET_DEVLINK=y
CONFIG_MAY_USE_DEVLINK=y
CONFIG_MLX4_EN=y

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/cma: Make sure that PSN is not over max allowed

[ Upstream commit 23a9cd2ad90543e9da3786878d2b2729c095439d ]

This patch limits the initial value for PSN to 24 bits as
spec requires.

Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Mukesh Kacker <mukesh.kacker@oracle.com>
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i40iw: Correct ARP index mask

[ Upstream commit a283cdc4d3670700182c820b59078387f9a01a30 ]

The ARP table entry indexes are aliased to 12bits
instead of the intended 16bits when uploaded to
the QP Context. This will present an issue when the
number of connections exceeds 4096 as ARP entries are
reused. Fix this by adjusting the mask to account for
the full 16bits.

Fixes: 4e9042e647ff ("i40iw: add hw and utils files")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i40iw: Do not free sqbuf when event is I40IW_TIMER_TYPE_CLOSE

[ Upstream commit 10499986dbd8778e1acf9f9d2e166800dfee44b4 ]

When the event type is I40IW_TIMER_TYPE_CLOSE, there is no sqbuf and
it should not be freed as one in i40iw_schedule_cm_timer().

Fixes: f27b4746f378 ("i40iw: add connection management code")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i40iw: Allocate a sdbuf per CQP WQE

[ Upstream commit 100d6de2ced538c539d923dc14a1b5cbae234503 ]

Currently there is only one sdbuf per Control QP (CQP) for
programming Segment Descriptor (SD). If multiple SD work
requests are posted simultaneously, the sdbuf is reused
by all WQEs and new WQEs can corrupt previous WQEs sdbuf
leading to incorrect SD programming.

Fix this by allocating one sdbuf per CQP SQ WQE. When an
SD command is posted, it will use the corresponding sdbuf
for the WQE.

Fixes: 86dbcd0f12e9 ("i40iw: add file to handle cqp calls")
Signed-off-by: Chien Tin Tung <chien.tin.tung@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm/arm64: Fix spinlock acquisition in vgic_set_owner

[ Upstream commit 7465894e90e5a47e0e52aa5f1f708653fc40020f ]

vgic_set_owner acquires the irq lock without disabling interrupts,
resulting in a lockdep splat (an interrupt could fire and result
in the same lock being taken if the same virtual irq is to be
injected).

In practice, it is almost impossible to trigger this bug, but
better safe than sorry. Convert the lock acquisition to a
spin_lock_irqsave() and keep lockdep happy.

Reported-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

meson-gx-socinfo: Fix package id parsing

[ Upstream commit 044d71bc6cdee8980d0fdc35ec79a0d5818b2ce3 ]

I've noticed the following message while booting a S905X based board:

soc soc0: Amlogic Meson GXL (S905D) Revision 21:82 (b:2) Detected

The S905D string is obviously wrong. The vendor code does:
...
        ver = (readl(assist_hw_rev) >> 8) & 0xff;
        meson_cpu_version[MESON_CPU_VERSION_LVL_MINOR] = ver;
        ver =  (readl(assist_hw_rev) >> 16) & 0xff;
        meson_cpu_version[MESON_CPU_VERSION_LVL_PACK] = ver;
...

while the current code does:
...
...

This means that the current mainline code has package id and minor
version reversed.

Fixes: a9daaba2965e8 ("soc: Add Amlogic SoC Information driver")
Signed-off-by: Arnaud Patard <apatard@hupstream.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/hfi1: Initialize bth1 in 16B rc ack builder

[ Upstream commit 8935780b9f7bbad0f2eb5dd43f61ba7b509a1575 ]

It is possible the bth1 variable could be used uninitialized so going
ahead and giving it a default value.

Otherwise we leak stack memory to the network.

Fixes: 5b6cabb0db77 ("IB/hfi1: Add 16B RC/UC support")
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: sunxi: Fix A64 UART mux value

[ Upstream commit 7c5c2c2d18d778e51fd8b899965097168306031c ]

To use pin PF4 as the RX signal of UART0, we have to write 0b011 into
the respective pin controller register.
Fix the wrong value we had in our table so far.

Fixes: 96851d391d02 ("drivers: pinctrl: add driver for Allwinner A64 SoC")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: sunxi: Fix A80 interrupt pin bank

[ Upstream commit 6ad4cc8d1ac483e0fd33f605fb2788b0ecf51ed4 ]

On the A80 the pins on port B can trigger interrupts, and those are
assigned to the second interrupt bank.
Having two pins assigned to the same interrupt bank/pin combination does
not look healthy (instead more like a copy&paste bug from pins PA14-PA16),
so fix the interrupt bank for pins PB14-PB16, which is actually 1.

I don't have any A80 board, so could not test this.

Fixes: d5e9fb31baa2 ("pinctrl: sunxi: Add A80 pinctrl muxing options")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: davinci: Assign first bank regs for unbanked case

[ Upstream commit 7f8e2a85c1b0bd440ffe87be82c79fdc319e8291 ]

As per the re-design assign the first bank regs for unbanked
irq case. This was missed out in the original patch.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Fixes: b5cf3fd827d2e1 ("gpio: davinci: Redesign driver to accommodate ngpios in one gpio chip")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: 74x164: Fix crash during .remove()

[ Upstream commit a158531f3c92467df0e93e000d58185acae78a6e ]

Commit 7ebc194d0fd4bb0f ("gpio: 74x164: Introduce 'enable-gpios'
property") added a new member gpiod_oe to the end of the struct
gen_74x164_chip, after the zero-length buffer array.

However, this buffer is a flexible array, allocated together with the
structure during .probe().  As the buffer is no longer the last member,
writing to it corrupts the newly added member after it.
During device removal, the corrupted member will be used as a pointer,
leading to a crash.

This went unnoticed, as the flexible array was declared as "buffer[0]"
instead of "buffer[]", and thus did not trigger a "flexible array member
not at end of struct" error from gcc.

Move the gpiod_oe field up to fix this, and drop the zero from the array
size to prevent future similar bugs.

Fixes: 7ebc194d0fd4bb0f ("gpio: 74x164: Introduce 'enable-gpios' property")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: mvpp2: allocate zeroed tx descriptors

[ Upstream commit a154f8e399a063137fc42b961f437248d55ece29 ]

Reserved and unused fields in the Tx descriptors should be 0. The PPv2
driver doesn't clear them at run-time (for performance reasons) but
these descriptors aren't zeroed when allocated, which can lead to
unpredictable behaviors. This patch fixes this by using
dma_zalloc_coherent instead of dma_alloc_coherent.

Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Yan Markman <ymarkman@marvell.com>
[Antoine: commit message]
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: ov13858: Select V4L2_FWNODE

[ Upstream commit fce8ba670b7418319da14a6fc6668db1f1a96267 ]

The ov13858 driver depends on the V4L2 fwnode, thus add that to Kconfig.

Fixes: 5fcf092e0c9f ("[media] ov13858: add support for OV13858 sensor")

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: s5k6aa: describe some function parameters

[ Upstream commit 070250a1715cee2297de0d9e7e2cea58be999d37 ]

as warned:
  drivers/media/i2c/s5k6aa.c:429: warning: No description found for parameter 's5k6aa'
  drivers/media/i2c/s5k6aa.c:679: warning: No description found for parameter 's5k6aa'
  drivers/media/i2c/s5k6aa.c:733: warning: No description found for parameter 's5k6aa'
  drivers/media/i2c/s5k6aa.c:733: warning: No description found for parameter 'preset'
  drivers/media/i2c/s5k6aa.c:787: warning: No description found for parameter 'sd'

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

trace/xdp: fix compile warning: 'struct bpf_map' declared inside parameter list

[ Upstream commit 23721a755f98ac846897a013c92cccb281c1bcc8 ]

We meet this compile warning, which caused by missing bpf.h in xdp.h.

In file included from ./include/trace/events/xdp.h:10:0,
                 from ./include/linux/bpf_trace.h:6,
                 from drivers/net/ethernet/intel/i40e/i40e_txrx.c:29:
./include/trace/events/xdp.h:93:17: warning: ‘struct bpf_map’ declared inside parameter list will not be visible outside of this definition or declaration
    const struct bpf_map *map, u32 map_index),
                 ^
./include/linux/tracepoint.h:187:34: note: in definition of macro ‘__DECLARE_TRACE’
  static inline void trace_##name(proto)    \
                                  ^~~~~
./include/linux/tracepoint.h:352:24: note: in expansion of macro ‘PARAMS’
  __DECLARE_TRACE(name, PARAMS(proto), PARAMS(args),  \
                        ^~~~~~
./include/linux/tracepoint.h:477:2: note: in expansion of macro ‘DECLARE_TRACE’
  DECLARE_TRACE(name, PARAMS(proto), PARAMS(args))
  ^~~~~~~~~~~~~
./include/linux/tracepoint.h:477:22: note: in expansion of macro ‘PARAMS’
  DECLARE_TRACE(name, PARAMS(proto), PARAMS(args))
                      ^~~~~~
./include/trace/events/xdp.h:89:1: note: in expansion of macro ‘DEFINE_EVENT’
 DEFINE_EVENT(xdp_redirect_template, xdp_redirect,
 ^~~~~~~~~~~~
./include/trace/events/xdp.h:90:2: note: in expansion of macro ‘TP_PROTO’
  TP_PROTO(const struct net_device *dev,
  ^~~~~~~~
./include/trace/events/xdp.h:93:17: warning: ‘struct bpf_map’ declared inside parameter list will not be visible outside of this definition or declaration
    const struct bpf_map *map, u32 map_index),
                 ^
./include/linux/tracepoint.h:203:38: note: in definition of macro ‘__DECLARE_TRACE’
  register_trace_##name(void (*probe)(data_proto), void *data) \
                                      ^~~~~~~~~~
./include/linux/tracepoint.h:354:4: note: in expansion of macro ‘PARAMS’
    PARAMS(void *__data, proto),   \
    ^~~~~~

Reported-by: Huang Daode <huangdaode@hisilicon.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Fixes: 8d3b778ff544 ("xdp: tracepoint xdp_redirect also need a map argument")
Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kvm: arm: don't treat unavailable HYP mode as an error

[ Upstream commit 58d0d19a204604ca0da26058828a53558b265da3 ]

Since it is perfectly legal to run the kernel at EL1, it is not
actually an error if HYP mode is not available when attempting to
initialize KVM, given that KVM support cannot be built as a module.
So demote the kvm_err() to kvm_info(), which prevents the error from
appearing on an otherwise 'quiet' console.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: denverton: Fix UART2 RTS pin mode

[ Upstream commit 4bd6683da2e64590bdc27ecf7e61ad8376861768 ]

UART2 RTS is mode 2 of the pin.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf test: Fix test 21 for s390x

[ Upstream commit 996548499df61babae5306544c7daf5fd39db31c ]

Test case 21 (Number of exit events of a simple workload) fails on
s390x. The reason is the invalid sample frequency supplied for this
test. On s390x the minimum sample frequency is much higher (see output
of /proc/service_levels).

Supply a save sample frequency value for s390x to fix this.  The value
will be adjusted by the s390x CPUMF frequency convertion function to a
value well below the sysctl kernel.perf_event_max_sample_rate value.

Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
LPU-Reference: 20171123114611.93397-1-tmricht@linux.vnet.ibm.com
Link: https://lkml.kernel.org/n/tip-1ynblyhi1n81idpido59nt1y@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf bench numa: Fixup discontiguous/sparse numa nodes

[ Upstream commit 321a7c35c90cc834851ceda18a8ee18f1d032b92 ]

Certain systems are designed to have sparse/discontiguous nodes.  On
such systems, 'perf bench numa' hangs, shows wrong number of nodes and
shows values for non-existent nodes. Handle this by only taking nodes
that are exposed by kernel to userspace.

Signed-off-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1edbcd353c009e109e93d78f2f46381930c340fe.1511368645.git.sathnaga@linux.vnet.ibm.com
Signed-off-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf top: Fix window dimensions change handling

[ Upstream commit 89d0aeab4252adc2a7ea693637dd21c588bfa2d1 ]

The stdio perf top crashes when we change the terminal
window size. The reason is that we assumed we get the
perf_top pointer as a signal handler argument which is
not the case.

Changing the SIGWINCH handler logic to change global
resize variable, which is checked in the main thread
loop.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ysuzwz77oev1ftgvdscn9bpu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf: Fix header.size for namespace events

[ Upstream commit 34900ec5c9577cc1b0f22887ac7349f458ba8ac2 ]

Reset header size for namespace events, otherwise it only gets bigger in
ctx iterations.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Fixes: e422267322cd ("perf: Add PERF_RECORD_NAMESPACES to include namespaces related info")
Link: http://lkml.kernel.org/n/tip-nlo4gonz9d4guyb8153ukzt0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf test shell: Fix check open filename arg using 'perf trace' on s390x

[ Upstream commit ccafc38f1c778847ab6d53dd7933260426731cf3 ]

This 'perf test' case fails on s390x. The 'touch' command on s390x uses
the 'openat' system call to open the file named on the command line:

[root@s35lp76 perf]# perf probe -l
  probe:vfs_getname    (on getname_flags:72@fs/namei.c with pathname)
[root@s35lp76 perf]# perf trace -e open touch /tmp/abc
     0.400 ( 0.015 ms): touch/27542 open(filename:
/usr/lib/locale/locale-archive, flags: CLOEXEC) = 3
[root@s35lp76 perf]#

There is no 'open' system call for file '/tmp/abc'. Instead the 'openat'
system call is used:

[root@s35lp76 perf]# strace touch /tmp/abc
    execve("/usr/bin/touch", ["touch", "/tmp/abc"], 0x3ffd547ec98
/* 30 vars */) = 0
    [...]
    openat(AT_FDCWD, "/tmp/abc", O_WRONLY|O_CREAT|O_NOCTTY|O_NONBLOCK, 0666) = 3
    [...]

On s390x the 'egrep' command does not find a matching pattern and
returns an error.

Fix this for s390x create a platform dependent command line to enable
the 'perf probe' call to listen to the 'openat' system call and get the
expected output.

Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
LPU-Reference: 20171114071847.2381-1-tmricht@linux.vnet.ibm.com
Link: http://lkml.kernel.org/n/tip-3qf38jk0prz54rhmhyu871my@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf annotate: Do not truncate instruction names at 6 chars

[ Upstream commit 05d0e62d9fa0f1002cf82009ef31b36174da5472 ]

There are many instructions, esp on PowerPC, whose mnemonics are longer
than 6 characters. Using precision limit causes truncation of such
mnemonics.

Fix this by removing precision limit. Note that, 'width' is still 6, so
alignment won't get affected for length <= 6.

Before:

   li     r11,-1
   xscvdp vs1,vs1
   add.   r10,r10,r11

After:

  li     r11,-1
  xscvdpsxds vs1,vs1
  add.   r10,r10,r11

Reported-by: Donald Stence <dstence@us.ibm.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/20171114032540.4564-1-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf help: Fix a bug during strstart() conversion

[ Upstream commit af98f2273fd0af31ce327cd1406b67c7be0b6734 ]

The commit 8e99b6d4533c changed prefixcmp() to strstart() but missed to
change the return value in some place.  It makes perf help print
annoying output even for sane config items like below:

  $ perf help
  '.root': unsupported man viewer sub key.
  ...

Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Sihyeon Jang <uneedsihyeon@gmail.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20171114001542.GA16464@sejong
Fixes: 8e99b6d4533c ("tools include: Adopt strstarts() from the kernel")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf record: Fix -c/-F options for cpu event aliases

[ Upstream commit 59622fd496a3175c7bf549046e091d81c303ecff ]

The Intel PMU event aliases have a implicit period= specifier to set the
default period.

Unfortunately this breaks overriding these periods with -c or -F,
because the alias terms look like they are user specified to the
internal parser, and user specified event qualifiers override the
command line options.

Track that they are coming from aliases by adding a "weak" state to the
term. Any weak terms don't override command line options.

I only did it for -c/-F for now, I think that's the only case that's
broken currently.

Before:

$ perf record -c 1000 -vv -e uops_issued.any
...
  { sample_period, sample_freq }   2000003

After:

$ perf record -c 1000 -vv -e uops_issued.any
...
  { sample_period, sample_freq }   1000

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20171020202755.21410-2-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: am437x-cm-t43: Correct the dmas property of spi0

[ Upstream commit ca41e244517d6d3f1600c229ff7ca615049c1e9c ]

The DMA binding for eDMA needs 2 parameters, not 1.
The second, missing parameter is the tptc to be used for the channel.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: am4372: Correct the interrupts_properties of McASP

[ Upstream commit 627395a6f8091c0aa18f49dca7df59ba3ec147ef ]

Fixes the following warnings:

arch/arm/boot/dts/am437x-cm-t43.dtb: Warning (interrupts_property):
interrupts size is (8), expected multiple of 12 in
/ocp@44000000/mcasp@48038000

arch/arm/boot/dts/am437x-cm-t43.dtb: Warning (interrupts_property):
interrupts size is (8), expected multiple of 12 in
/ocp@44000000/mcasp@4803C000

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: logicpd-somlv: Fix wl127x pinmux

[ Upstream commit cd7594ac3281722cb8f10d6f6c7e4287747c7a9d ]

The pin assignment for the wl127x interrupt was incorrect.  I am
not sure how this every worked.  This also eliminates a conflict with
the SMC911x ethernet driver and properly moves pinmuxes for the
related gpio to omap3_pmx_wkup from omap3_pmx_core.

Fixes: ab8dd3aed011 ("ARM: DTS: Add minimal Support for Logic PD
DM3730 SOM-LV")

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: logicpd-som-lv: Fix gpmc addresses for NAND and enet

[ Upstream commit 3c18bbf3d11d2005da08b57ff26f44ff1c2b12d0 ]

This patch fixes and issue where the NAND and GPMC based ethernet
controller stopped working.  This also updates the GPMC settings
to be consistent with the Logic PD Torpedo development from the
commit listed above.

Fixes: 44e4716499b8 ("ARM: dts: omap3: Fix NAND device nodes")

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: Fix omap4 hang with GPS connected to USB by using wakeupgen

[ Upstream commit cf87634c8b24e24bf379b8c6807c8b0fb5f23567 ]

There's been a reproducable USB OHCI/EHCI cpuidle related hang on omap4
for a while that happens after about 20 - 40 minutes on an idle system
with some data feeding device being connected, like a USB GPS device or
a cellular modem.

This issue happens in cpuidle states C2 and C3 and does not happen if
cpuidle is limited to C1 state only. The symptoms are that the whole
system hangs and never wakes up from idle, and if a watchdog is
configured the system reboots after a while.

Turns out that OHCI/EHCI devices on omap4 are trying to use the GIC
interrupt controller directly as a parent instead of the WUGEN. We
need to pass the interrupts through WUGEN to GIC to provide the wakeup
events for the processor.

Let's fix the issue by removing the gic interrupt-parent and use the
default interrupt-parent wakeupgen instead. Note that omap5.dtsi had
this already fixes earlier by commit 7136d457f365 ("ARM: omap: convert
wakeupgen to stacked domains") but we somehow missed omap4 at that
point.

Fixes: 7136d457f365 ("ARM: omap: convert wakeupgen to stacked domains")
Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Reviewed-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: AM33xx: PRM: Remove am33xx_pwrdm_read_prev_pwrst function

[ Upstream commit b6d6af7226465b6d11eac09d0be2ab78a4a9eb62 ]

Referring TRM Am335X series:
http://www.ti.com/lit/ug/spruh73p/spruh73p.pdf

The LastPowerStateEntered bitfield is present only for PM_CEFUSE
domain. This is not present in any of the other power domains. Hence
remove the generic am33xx_pwrdm_read_prev_pwrst hook which wrongly
reads the reserved bit fields for all the other power domains.

Reading the reserved bits leads to wrongly interpreting the low
power transitions for various power domains that do not have the
LastPowerStateEntered field. The pm debug counters values are wrong
currently as we are incrementing them based on the reserved bits.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: OMAP2+: Fix SRAM virt to phys translation for save_secure_ram_context

[ Upstream commit d09220a887f70368afa79e850c95e74890c0a32d ]

With the CMA changes from Joonsoo Kim <iamjoonsoo.kim@lge.com>, it
was noticed that n900 stopped booting. After investigating it turned
out that n900 save_secure_ram_context does some whacky virtual to
physical address translation for the SRAM data address.

As we now only have minimal parts of omap3 idle code copied to SRAM,
running save_secure_ram_context() in SRAM is not needed. It only gets
called on PM init. And it seems there's no need to ever call this from
SRAM idle code.

So let's just keep save_secure_ram_context() in DDR, and pass it the
physical address of the parameters. We can do everything else in
omap-secure.c like we already do for other secure code.

And since we don't have any documentation, I still have no clue what
the values for 0, 1 and 1 for the parameters might be. If somebody has
figured it out, please do send a patch to add some comments.

Debugged-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serdev: fix receive_buf return value when no callback

[ Upstream commit fd00cf81a9a84776ba58e56bd042c726dcf75cf3 ]

The receive_buf callback is supposed to return the number of bytes
processed and should specifically not return a negative errno.

Due to missing sanity checks in the serdev tty-port controller, a driver
not providing a receive_buf callback could cause the flush_to_ldisc()
worker to spin in a tight loop when the tty buffer pointers are
incremented with -EINVAL (-22).

The missing sanity checks have now been added to the tty-port
controller, but let's fix up the serdev-controller helper as well.

Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: build drivers/usb/common/ when USB_SUPPORT is set

[ Upstream commit c9d24f78268be444e803fb2bb138a2f598de9c23 ]

PHY drivers can use ULPI interfaces when CONFIG_USB (which is host side
support) is not enabled, so also build drivers/usb/ when CONFIG_USB_SUPPORT
is enabled so that drivers/usb/common/ is built.

ERROR: "ulpi_unregister_driver" [drivers/phy/ti/phy-tusb1210.ko] undefined!
ERROR: "__ulpi_register_driver" [drivers/phy/ti/phy-tusb1210.ko] undefined!
ERROR: "ulpi_read" [drivers/phy/ti/phy-tusb1210.ko] undefined!
ERROR: "ulpi_write" [drivers/phy/ti/phy-tusb1210.ko] undefined!
ERROR: "ulpi_unregister_driver" [drivers/phy/qualcomm/phy-qcom-usb-hs.ko] undefined!
ERROR: "__ulpi_register_driver" [drivers/phy/qualcomm/phy-qcom-usb-hs.ko] undefined!
ERROR: "ulpi_write" [drivers/phy/qualcomm/phy-qcom-usb-hs.ko] undefined!

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbip: keep usbip_device sockfd state in sync with tcp_socket

commit 009f41aed4b3e11e6dc1e3c07377a10c20f1a5ed upstream.

Keep usbip_device sockfd state in sync with tcp_socket. When tcp_socket
is reset to null, reset sockfd to -1 to keep it in sync.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: ad5933: switch buffer mode to software

commit 7d2b8e6aaf9ee87910c2337e1c59bb5d3e3ba8c5 upstream.

Since commit 152a6a884ae1 ("staging:iio:accel:sca3000 move
to hybrid hard / soft buffer design.")
the buffer mechanism has changed and the
INDIO_BUFFER_HARDWARE flag has been unused.

Since commit 2d6ca60f3284 ("iio: Add a DMAengine framework
based buffer")
the INDIO_BUFFER_HARDWARE flag has been re-purposed for
DMA buffers.

This driver has lagged behind these changes, and
in order for buffers to work, the INDIO_BUFFER_SOFTWARE
needs to be used.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Fixes: 2d6ca60f3284 ("iio: Add a DMAengine framework based buffer")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: adc: ad7192: fix external frequency setting

commit e31b617d0a63c6558485aaa730fd162faa95a766 upstream.

The external clock frequency was set only when selecting
the internal clock, which is fixed at 4.9152 Mhz.

This is incorrect, since it should be set when any of
the external clock or crystal settings is selected.

Added range validation for the external (crystal/clock)
frequency setting.
Valid values are between 2.4576 and 5.12 Mhz.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc: fix build testing on x86

commit 02b7b2844c2ffd3b614ec2b9293e8c7f041d60da upstream.

Selecting GENERIC_MSI_IRQ_DOMAIN on x86 causes a compile-time error in
some configurations:

drivers/base/platform-msi.c:37:19: error: field 'arg' has incomplete type

On the other architectures, we are fine, but here we should have an additional
dependency on X86_LOCAL_APIC so we can get the PCI_MSI_IRQ_DOMAIN symbol.

Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

binder: replace "%p" with "%pK"

commit 8ca86f1639ec5890d400fff9211aca22d0a392eb upstream.

The format specifier "%p" can leak kernel addresses. Use
"%pK" instead. There were 4 remaining cases in binder.c.

Signed-off-by: Todd Kjos <tkjos@google.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

binder: check for binder_thread allocation failure in binder_poll()

commit f88982679f54f75daa5b8eff3da72508f1e7422f upstream.

If the kzalloc() in binder_get_thread() fails, binder_poll()
dereferences the resulting NULL pointer.

Fix it by returning POLLERR if the memory allocation failed.

This bug was found by syzkaller using fault injection.

Reported-by: syzbot <syzkaller@googlegroups.com>
Fixes: 457b9a6f09f0 ("Staging: android: add binder driver")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ashmem: Fix a race condition in pin ioctls

commit ce8a3a9e76d0193e2e8d74a06d275b3c324ca652 upstream.

ashmem_pin_unpin() reads asma->file and asma->size before taking the
ashmem_mutex, so it can race with other operations that modify them.

Build-tested only.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ANDROID: binder: synchronize_rcu() when using POLLFREE.

commit 5eeb2ca02a2f6084fc57ae5c244a38baab07033a upstream.

To prevent races with ep_remove_waitqueue() removing the
waitqueue at the same time.

Reported-by: syzbot+a2a3c4909716e271487e@syzkaller.appspotmail.com
Signed-off-by: Martijn Coenen <maco@android.com>
Cc: stable <stable@vger.kernel.org> # 4.14+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ANDROID: binder: remove WARN() for redundant txn error

commit e46a3b3ba7509cb7fda0e07bc7c63a2cd90f579b upstream.

binder_send_failed_reply() is called when a synchronous
transaction fails. It reports an error to the thread that
is waiting for the completion. Given that the transaction
is synchronous, there should never be more than 1 error
response to that thread -- this was being asserted with
a WARN().

However, when exercising the driver with syzbot tests, cases
were observed where multiple "synchronous" requests were
sent without waiting for responses, so it is possible that
multiple errors would be reported to the thread. This testing
was conducted with panic_on_warn set which forced the crash.

This is easily reproduced by sending back-to-back
"synchronous" transactions without checking for any
response (eg, set read_size to 0):

    bwr.write_buffer = (uintptr_t)&bc1;
    bwr.write_size = sizeof(bc1);
    bwr.read_buffer = (uintptr_t)&br;
    bwr.read_size = 0;
    ioctl(fd, BINDER_WRITE_READ, &bwr);
    sleep(1);
    bwr2.write_buffer = (uintptr_t)&bc2;
    bwr2.write_size = sizeof(bc2);
    bwr2.read_buffer = (uintptr_t)&br;
    bwr2.read_size = 0;
    ioctl(fd, BINDER_WRITE_READ, &bwr2);
    sleep(1);

The first transaction is sent to the servicemanager and the reply
fails because no VMA is set up by this client. After
binder_send_failed_reply() is called, the BINDER_WORK_RETURN_ERROR
is sitting on the thread's todo list since the read_size was 0 and
the client is not waiting for a response.

The 2nd transaction is sent and the BINDER_WORK_RETURN_ERROR has not
been consumed, so the thread's reply_error.cmd is still set (normally
cleared when the BINDER_WORK_RETURN_ERROR is handled). Therefore
when the servicemanager attempts to reply to the 2nd failed
transaction, the error is already set and it triggers this warning.

This is a user error since it is not waiting for the synchronous
transaction to complete. If it ever does check, it will see an
error.

Changed the WARN() to a pr_warn().

Signed-off-by: Todd Kjos <tkjos@android.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dn_getsockoptdecnet: move nf_{get/set}sockopt outside sock lock

commit dfec091439bb2acf763497cfc58f2bdfc67c56b7 upstream.

After commit 3f34cfae1238 ("netfilter: on sockopt() acquire sock lock
only in the required scope"), the caller of nf_{get/set}sockopt() must
not hold any lock, but, in such changeset, I forgot to cope with DECnet.

This commit addresses the issue moving the nf call outside the lock,
in the dn_{get,set}sockopt() with the same schema currently used by
ipv4 and ipv6. Also moves the unhandled sockopts of the end of the main
switch statements, to improve code readability.

Reported-by: Petr Vandrovec <petr@vandrovec.name>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198791#c2
Fixes: 3f34cfae1238 ("netfilter: on sockopt() acquire sock lock only in the required scope")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: add #cooling-cells to CPU nodes

commit acbf76ee05067c3942852019993f7beb69a0f45f upstream.

dtc complains about the lack of #coolin-cells properties for the
CPU nodes that are referred to as "cooling-device":

arch/arm64/boot/dts/mediatek/mt8173-evb.dtb: Warning (cooling_device_property): Missing property '#cooling-cells' in node /cpus/cpu@0 or bad phandle (referred from /thermal-zones/cpu_thermal/cooling-maps/map@0:cooling-device[0])
arch/arm64/boot/dts/mediatek/mt8173-evb.dtb: Warning (cooling_device_property): Missing property '#cooling-cells' in node /cpus/cpu@100 or bad phandle (referred from /thermal-zones/cpu_thermal/cooling-maps/map@1:cooling-device[0])

Apparently this property must be '<2>' to match the binding.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
[arnd: backported to 4.15]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 8743/1: bL_switcher: add MODULE_LICENSE tag

commit a21b4c10c7bf5b58112afa20d6fa829e8d74e3e6 upstream.

Without this tag, we get a build warning:

WARNING: modpost: missing MODULE_LICENSE() in arch/arm/common/bL_switcher_dummy_if.o

For completeness, I'm also adding author and description fields.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

video: fbdev/mmp: add MODULE_LICENSE

commit c1530ac5a3ce93a1f02adabc4508b5fbf862dfe2 upstream.

Kbuild complains about the lack of a license tag in this driver:

WARNING: modpost: missing MODULE_LICENSE() in drivers/video/fbdev/mmp/mmp_disp.o

This adds the license, author and description tags.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: ux500: add MODULE_LICENSE tag

commit 1783c9d7cb7bc3181b9271665959b87280d98d8e upstream.

This adds MODULE_LICENSE/AUTHOR/DESCRIPTION tags to the ux500
platform drivers, to avoid these build warnings:

WARNING: modpost: missing MODULE_LICENSE() in sound/soc/ux500/snd-soc-ux500-plat-dma.o
WARNING: modpost: missing MODULE_LICENSE() in sound/soc/ux500/snd-soc-ux500-mach-mop500.o

The company no longer exists, so the email addresses of the authors
don't work any more, but I've added them anyway for consistency.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net_sched: gen_estimator: fix lockdep splat

commit 40ca54e3a686f13117f3de0c443f8026dadf7c44 upstream.

syzbot reported a lockdep splat in gen_new_estimator() /
est_fetch_counters() when attempting to lock est->stats_lock.

Since est_fetch_counters() is called from BH context from timer
interrupt, we need to block BH as well when calling it from process
context.

Most qdiscs use per cpu counters and are immune to the problem,
but net/sched/act_api.c and net/netfilter/xt_RATEEST.c are using
a spinlock to protect their data. They both call gen_new_estimator()
while object is created and not yet alive, so this bug could
not trigger a deadlock, only a lockdep splat.

Fixes: 1c0d32fde5bd ("net_sched: gen_estimator: complete rewrite of rate estimators")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: avoid skb_warn_bad_offload on IS_ERR

commit 8d74e9f88d65af8bb2e095aff506aa6eac755ada upstream.

skb_warn_bad_offload warns when packets enter the GSO stack that
require skb_checksum_help or vice versa. Do not warn on arbitrary
bad packets. Packet sockets can craft many. Syzkaller was able to
demonstrate another one with eth_type games.

In particular, suppress the warning when segmentation returns an
error, which is for reasons other than checksum offload.

See also commit 36c92474498a ("net: WARN if skb_checksum_help() is
called on skb requiring segmentation") for context on this warning.

Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rds: tcp: atomically purge entries from rds_tcp_conn_list during netns delete

commit f10b4cff98c6977668434fbf5dd58695eeca2897 upstream.

The rds_tcp_kill_sock() function parses the rds_tcp_conn_list
to find the rds_connection entries marked for deletion as part
of the netns deletion under the protection of the rds_tcp_conn_lock.
Since the rds_tcp_conn_list tracks rds_tcp_connections (which
have a 1:1 mapping with rds_conn_path), multiple tc entries in
the rds_tcp_conn_list will map to a single rds_connection, and will
be deleted as part of the rds_conn_destroy() operation that is
done outside the rds_tcp_conn_lock.

The rds_tcp_conn_list traversal done under the protection of
rds_tcp_conn_lock should not leave any doomed tc entries in
the list after the rds_tcp_conn_lock is released, else another
concurrently executiong netns delete (for a differnt netns) thread
may trip on these entries.

Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rds: tcp: correctly sequence cleanup on netns deletion.

commit 681648e67d43cf269c5590ecf021ed481f4551fc upstream.

Commit 8edc3affc077 ("rds: tcp: Take explicit refcounts on struct net")
introduces a regression in rds-tcp netns cleanup. The cleanup_net(),
(and thus rds_tcp_dev_event notification) is only called from put_net()
when all netns refcounts go to 0, but this cannot happen if the
rds_connection itself is holding a c_net ref that it expects to
release in rds_tcp_kill_sock.

Instead, the rds_tcp_kill_sock callback should make sure to
tear down state carefully, ensuring that the socket teardown
is only done after all data-structures and workqs that depend
on it are quiesced.

The original motivation for commit 8edc3affc077 ("rds: tcp: Take explicit
refcounts on struct net") was to resolve a race condition reported by
syzkaller where workqs for tx/rx/connect were triggered after the
namespace was deleted. Those worker threads should have been
cancelled/flushed before socket tear-down and indeed,
rds_conn_path_destroy() does try to sequence this by doing
     /* cancel cp_send_w */
     /* cancel cp_recv_w */
     /* flush cp_down_w */
     /* free data structures */
Here the "flush cp_down_w" will trigger rds_conn_shutdown and thus
invoke rds_tcp_conn_path_shutdown() to close the tcp socket, so that
we ought to have satisfied the requirement that "socket-close is
done after all other dependent state is quiesced". However,
rds_conn_shutdown has a bug in that it *always* triggers the reconnect
workq (and if connection is successful, we always restart tx/rx
workqs so with the right timing, we risk the race conditions reported
by syzkaller).

Netns deletion is like module teardown- no need to restart a
reconnect in this case. We can use the c_destroy_in_prog bit
to avoid restarting the reconnect.

Fixes: 8edc3affc077 ("rds: tcp: Take explicit refcounts on struct net")
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: xt_RATEEST: acquire xt_rateest_mutex for hash insert

commit 7dc68e98757a8eccf8ca7a53a29b896f1eef1f76 upstream.

rateest_hash is supposed to be protected by xt_rateest_mutex,
and, as suggested by Eric, lookup and insert should be atomic,
so we should acquire the xt_rateest_mutex once for both.

So introduce a non-locking helper for internal use and keep the
locking one for external.

Reported-by: <syzbot+5cb189720978275e4c75@syzkaller.appspotmail.com>
Fixes: 5859034d7eb8 ("[NETFILTER]: x_tables: add RATEEST target")
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: xt_cgroup: initialize info->priv in cgroup_mt_check_v1()

commit ba7cd5d95f25cc6005f687dabdb4e7a6063adda9 upstream.

xt_cgroup_info_v1->priv is an internal pointer only used for kernel,
we should not trust what user-space provides.

Reported-by: <syzbot+4fbcfcc0d2e6592bd641@syzkaller.appspotmail.com>
Fixes: c38c4597e4bf ("netfilter: implement xt_cgroup cgroup2 path match")
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: on sockopt() acquire sock lock only in the required scope

commit 3f34cfae1238848fd53f25e5c8fd59da57901f4b upstream.

Syzbot reported several deadlocks in the netfilter area caused by
rtnl lock and socket lock being acquired with a different order on
different code paths, leading to backtraces like the following one:

======================================================
WARNING: possible circular locking dependency detected
4.15.0-rc9+ #212 Not tainted
------------------------------------------------------
syzkaller041579/3682 is trying to acquire lock:
  (sk_lock-AF_INET6){+.+.}, at: [<000000008775e4dd>] lock_sock
include/net/sock.h:1463 [inline]
  (sk_lock-AF_INET6){+.+.}, at: [<000000008775e4dd>]
do_ipv6_setsockopt.isra.8+0x3c5/0x39d0 net/ipv6/ipv6_sockglue.c:167

but task is already holding lock:
  (rtnl_mutex){+.+.}, at: [<000000004342eaa9>] rtnl_lock+0x17/0x20
net/core/rtnetlink.c:74

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (rtnl_mutex){+.+.}:
        __mutex_lock_common kernel/locking/mutex.c:756 [inline]
        __mutex_lock+0x16f/0x1a80 kernel/locking/mutex.c:893
        mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:908
        rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74
        register_netdevice_notifier+0xad/0x860 net/core/dev.c:1607
        tee_tg_check+0x1a0/0x280 net/netfilter/xt_TEE.c:106
        xt_check_target+0x22c/0x7d0 net/netfilter/x_tables.c:845
        check_target net/ipv6/netfilter/ip6_tables.c:538 [inline]
        find_check_entry.isra.7+0x935/0xcf0
net/ipv6/netfilter/ip6_tables.c:580
        translate_table+0xf52/0x1690 net/ipv6/netfilter/ip6_tables.c:749
        do_replace net/ipv6/netfilter/ip6_tables.c:1165 [inline]
        do_ip6t_set_ctl+0x370/0x5f0 net/ipv6/netfilter/ip6_tables.c:1691
        nf_sockopt net/netfilter/nf_sockopt.c:106 [inline]
        nf_setsockopt+0x67/0xc0 net/netfilter/nf_sockopt.c:115
        ipv6_setsockopt+0x115/0x150 net/ipv6/ipv6_sockglue.c:928
        udpv6_setsockopt+0x45/0x80 net/ipv6/udp.c:1422
        sock_common_setsockopt+0x95/0xd0 net/core/sock.c:2978
        SYSC_setsockopt net/socket.c:1849 [inline]
        SyS_setsockopt+0x189/0x360 net/socket.c:1828
        entry_SYSCALL_64_fastpath+0x29/0xa0

-> #0 (sk_lock-AF_INET6){+.+.}:
        lock_acquire+0x1d5/0x580 kernel/locking/lockdep.c:3914
        lock_sock_nested+0xc2/0x110 net/core/sock.c:2780
        lock_sock include/net/sock.h:1463 [inline]
        do_ipv6_setsockopt.isra.8+0x3c5/0x39d0 net/ipv6/ipv6_sockglue.c:167
        ipv6_setsockopt+0xd7/0x150 net/ipv6/ipv6_sockglue.c:922
        udpv6_setsockopt+0x45/0x80 net/ipv6/udp.c:1422
        sock_common_setsockopt+0x95/0xd0 net/core/sock.c:2978
        SYSC_setsockopt net/socket.c:1849 [inline]
        SyS_setsockopt+0x189/0x360 net/socket.c:1828
        entry_SYSCALL_64_fastpath+0x29/0xa0

other info that might help us debug this:

  Possible unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(rtnl_mutex);
                                lock(sk_lock-AF_INET6);
                                lock(rtnl_mutex);
   lock(sk_lock-AF_INET6);

  *** DEADLOCK ***

1 lock held by syzkaller041579/3682:
  #0:  (rtnl_mutex){+.+.}, at: [<000000004342eaa9>] rtnl_lock+0x17/0x20
net/core/rtnetlink.c:74

The problem, as Florian noted, is that nf_setsockopt() is always
called with the socket held, even if the lock itself is required only
for very tight scopes and only for some operation.

This patch addresses the issues moving the lock_sock() call only
where really needed, namely in ipv*_getorigdst(), so that nf_setsockopt()
does not need anymore to acquire both locks.

Fixes: 22265a5c3c10 ("netfilter: xt_TEE: resolve oif using netdevice notifiers")
Reported-by: syzbot+a4c2dc980ac1af699b36@syzkaller.appspotmail.com
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: ipt_CLUSTERIP: fix out-of-bounds accesses in clusterip_tg_check()

commit 1a38956cce5eabd7b74f94bab70265e4df83165e upstream.

Commit 136e92bbec0a switched local_nodes from an array to a bitmask
but did not add proper bounds checks. As the result
clusterip_config_init_nodelist() can both over-read
ipt_clusterip_tgt_info.local_nodes and over-write
clusterip_config.local_nodes.

Add bounds checks for both.

Fixes: 136e92bbec0a ("[NETFILTER] CLUSTERIP: use a bitmap to store node responsibility data")
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: x_tables: avoid out-of-bounds reads in xt_request_find_{match|target}

commit da17c73b6eb74aad3c3c0654394635675b623b3e upstream.

It looks like syzbot found its way into netfilter territory.

Issue here is that @name comes from user space and might
not be null terminated.

Out-of-bound reads happen, KASAN is not happy.

v2 added similar fix for xt_request_find_target(),
as Florian advised.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>