OSDN Git Service
Tay Ray Chuan [Sat, 25 Sep 2010 04:20:35 +0000 (12:20 +0800)]
smart-http: Don't change POST to GET when following redirect
For a long time (
29508e1 "Isolate shared HTTP request functionality", Fri
Nov 18 11:02:58 2005), we've followed HTTP redirects with
CURLOPT_FOLLOWLOCATION.
However, when the remote HTTP server returns a redirect the default
libcurl action is to change a POST request into a GET request while
following the redirect, but the remote http backend does not expect
that.
Fix this by telling libcurl to always keep the request as type POST with
CURLOPT_POSTREDIR.
For users of libcurl older than 7.19.1, use CURLOPT_POST301 instead,
which only follows 301s instead of both 301s and 302s.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brian Gernhardt [Fri, 24 Sep 2010 22:15:34 +0000 (18:15 -0400)]
git-stash: fix flag parsing
Currently git-stash uses `git rev-parse --no-revs -- "$@"` to set its
FLAGS variable. This is the same as `FLAGS="-- $@"`. It should use
`git rev-parse --no-revs --flags "$@"`, but that eats any "-q" or
"--quiet" argument. So move the check for quiet before rev-parse.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Casey [Fri, 24 Sep 2010 20:40:38 +0000 (15:40 -0500)]
t/t3903-stash: improve testing of git-stash show
Recently, the 'stash show' functionality was broken for the case when a
stash-like argument was supplied. Since, commit 9bf09e, 'stash show' when
supplied a stash-like argument prints nothing and still exists with a zero
status. Unfortunately, the flaw slipped through the test suite cracks
since the output of 'stash show' was not verified to be correct.
Improve and expand on the existing tests so that this flaws is detected.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 18 Sep 2010 21:55:08 +0000 (14:55 -0700)]
Git 1.7.3
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 18 Sep 2010 21:46:44 +0000 (14:46 -0700)]
Merge branch 'js/ls-files-x-doc'
* js/ls-files-x-doc:
ls-files documentation: reword for consistency
git-ls-files.txt: clarify -x/--exclude option
Conflicts:
Documentation/git-ls-files.txt
Chris Johnsen [Fri, 17 Sep 2010 21:42:51 +0000 (16:42 -0500)]
git-rebase--interactive.sh: replace cut with ${v%% *}
Some versions of cut do not cope well with lines that do not end in
an LF. In this case, we can completely avoid cut by using the
${var%% *} parameter expansion (suggested by Brandon Casey).
I found this problem when t3404's "avoid unnecessary reset" failed
due to the "rebase -i" not avoiding updating the tested timestamp.
On a Mac OS X 10.4.11 system:
% printf '%s' 'foo bar' | /usr/bin/cut -d ' ' -f 1
cut: stdin: Illegal byte sequence
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Casey [Wed, 15 Sep 2010 20:58:22 +0000 (15:58 -0500)]
t/t7300: workaround ancient touch by rearranging arguments
The ancient touch on Solaris 7 thinks that a decimal number supplied as
the first argument specifies a date_time to give to the files specified by
the remaining arguments. In this case, it fails to parse '1' as a proper
date_time and exits with a failure status. Workaround this flaw by
rearranging the arguments supplied to touch so that a non-digit appears
first and touch will not be confused.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 16 Sep 2010 14:43:41 +0000 (07:43 -0700)]
Merge branch 'bg/fix-t7003'
* bg/fix-t7003:
t7003: Use test_commit instead of custom function
Junio C Hamano [Thu, 16 Sep 2010 00:34:20 +0000 (17:34 -0700)]
ls-files documentation: reword for consistency
Similar to descriptions of other options, state what -x does in imperative
mood. Start sentences for -X and --exclude-per-directory options in
capital letters.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jay Soffian [Wed, 15 Sep 2010 23:56:48 +0000 (19:56 -0400)]
git-ls-files.txt: clarify -x/--exclude option
Since
b5227d8, -x/--exclude does not apply to cached files.
This is easy to miss unless you read the discussion in the
EXCLUDE PATTERNS section. Clarify that the option applies
to untracked files and direct the reader to EXCLUDE PATTERNS.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 15 Sep 2010 19:47:37 +0000 (12:47 -0700)]
Git 1.7.3 rc2
Junio C Hamano [Wed, 15 Sep 2010 19:41:13 +0000 (12:41 -0700)]
Merge branch 'dr/maint-ls-tree-prefix-recursion-fix'
* dr/maint-ls-tree-prefix-recursion-fix:
ls-tree $di $dir: do not mistakenly recurse into directories
Junio C Hamano [Wed, 15 Sep 2010 19:40:33 +0000 (12:40 -0700)]
Merge branch 'os/fix-rebase-diff-no-prefix'
* os/fix-rebase-diff-no-prefix:
Add --src/dst-prefix to git-formt-patch in git-rebase.sh
Junio C Hamano [Wed, 15 Sep 2010 19:40:12 +0000 (12:40 -0700)]
Merge branch 'jl/fix-test'
* jl/fix-test:
t1020: Get rid of 'cd "$HERE"' at the start of each test
t2016 (checkout -p): add missing &&
t1302 (core.repositoryversion): style tweaks
t2105 (gitfile): add missing &&
t1450 (fsck): remove dangling objects
tests: subshell indentation stylefix
Several tests: cd inside subshell instead of around
Junio C Hamano [Wed, 15 Sep 2010 19:39:32 +0000 (12:39 -0700)]
Merge branch 'ch/filter-branch-deprecate-remap-to-ancestor'
* ch/filter-branch-deprecate-remap-to-ancestor:
filter-branch: retire --remap-to-ancestor
Junio C Hamano [Wed, 15 Sep 2010 19:39:22 +0000 (12:39 -0700)]
Merge branch 'ch/maint-cannot-create-bundle-error'
* ch/maint-cannot-create-bundle-error:
bundle: detect if bundle file cannot be created
Junio C Hamano [Wed, 15 Sep 2010 19:39:12 +0000 (12:39 -0700)]
Merge branch 'ks/recursive-rename-add-identical'
* ks/recursive-rename-add-identical:
RE: [PATCH] Avoid rename/add conflict when contents are identical
Junio C Hamano [Wed, 15 Sep 2010 19:34:37 +0000 (12:34 -0700)]
Merge git://repo.or.cz/git-gui
* 'master' of git://repo.or.cz/git-gui:
git-gui 0.13
git-gui: avoid mis-encoding the copyright message on Windows.
git-gui: Update Swedish translation (521t).
git-gui: ensure correct application termination in git-gui--askpass
git-gui: handle textconv filter on Windows and in development
git-gui: use shell to launch textconv filter in "blame"
git-gui: display error launching blame as a message box.
git-gui: Make usage statement visible on Windows.
Pat Thoyts [Tue, 14 Sep 2010 21:42:37 +0000 (22:42 +0100)]
git-gui 0.13
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Pat Thoyts [Mon, 13 Sep 2010 19:41:42 +0000 (20:41 +0100)]
git-gui: avoid mis-encoding the copyright message on Windows.
On Windows the tcl script file will use the system encoding and attempting
to convert the copyright mis-encodes the string. Instead, keep the message
as ASCII and substitute in the correct unicode character when running.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Peter Krefting [Sun, 12 Sep 2010 20:13:29 +0000 (21:13 +0100)]
git-gui: Update Swedish translation (521t).
Signed-off-by: Peter Krefting <peter@softwolves.pp.se>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Brian Gernhardt [Fri, 10 Sep 2010 22:06:36 +0000 (18:06 -0400)]
t7003: Use test_commit instead of custom function
t7003-filter-branch.sh had a make_commit() function that was identical
to test_commit() in test-lib.sh except that it used tr to create a
lowercase file name from the uppercase branch name instead of
appending ".t".
Not only is this unneeded code duplication, it also was something
simply waiting to fail on case-insensitive file systems. So replace
all uses of make_commit with test_commit.
While we're editing the setup, chain it together with && so that
failures early in the sequence don't get lost and add a commit graph.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 12 Sep 2010 20:53:03 +0000 (13:53 -0700)]
Merge branch 'maint'
* maint:
t3101: modernise style
compat/nedmalloc: don't force NDEBUG on the rest of git
Conflicts:
Makefile
Junio C Hamano [Sat, 11 Sep 2010 18:47:09 +0000 (11:47 -0700)]
ls-tree $di $dir: do not mistakenly recurse into directories
When applying two pathspecs, one of which is named as a prefix to the
other, we mistakenly recursed into the shorter one.
Noticed and fixed by David Reis.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 11 Sep 2010 17:53:29 +0000 (10:53 -0700)]
t3101: modernise style
Also add a few " &&" cascade that were missing.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ramsay Jones [Thu, 9 Sep 2010 17:24:06 +0000 (18:24 +0100)]
vcs-svn: Fix some printf format compiler warnings
In particular, on systems that define uint32_t as an unsigned long,
gcc complains as follows:
CC vcs-svn/fast_export.o
vcs-svn/fast_export.c: In function `fast_export_modify':
vcs-svn/fast_export.c:28: warning: unsigned int format, uint32_t arg (arg 2)
vcs-svn/fast_export.c:28: warning: int format, uint32_t arg (arg 3)
vcs-svn/fast_export.c: In function `fast_export_commit':
vcs-svn/fast_export.c:42: warning: int format, uint32_t arg (arg 5)
vcs-svn/fast_export.c:62: warning: int format, uint32_t arg (arg 2)
vcs-svn/fast_export.c: In function `fast_export_blob':
vcs-svn/fast_export.c:72: warning: int format, uint32_t arg (arg 2)
vcs-svn/fast_export.c:72: warning: int format, uint32_t arg (arg 3)
CC vcs-svn/svndump.o
vcs-svn/svndump.c: In function `svndump_read':
vcs-svn/svndump.c:260: warning: int format, uint32_t arg (arg 3)
In order to suppress the warnings we use the C99 format specifier
macros PRIo32 and PRIu32 from <inttypes.h>.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sat, 11 Sep 2010 09:59:18 +0000 (11:59 +0200)]
compat/nedmalloc: don't force NDEBUG on the rest of git
Define the nedmalloc feature configuration macros for nedmalloc.o, only.
This keeps assert(3) working for the rest of the git source; it was
turned off for nedmalloc users before by defining NDEBUG globally.
Also remove -DUSE_NED_ALLOCATOR as this macro isn't used anywhere.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 10 Sep 2010 18:55:55 +0000 (11:55 -0700)]
Git 1.7.3 rc1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 10 Sep 2010 18:54:58 +0000 (11:54 -0700)]
Merge branch 'np/relnotes-in-subdir'
* np/relnotes-in-subdir:
install-webdoc: keep installed RelNotes-*.txt
Documentation: move RelNotes into a directory of their own
Junio C Hamano [Fri, 10 Sep 2010 18:54:34 +0000 (11:54 -0700)]
Prepare for 1.7.3 rc1
Junio C Hamano [Fri, 10 Sep 2010 16:39:08 +0000 (09:39 -0700)]
Merge branch 'maint'
* maint:
config.txt: fix placement of diff.noprefix
Mark Lodato [Fri, 10 Sep 2010 01:39:37 +0000 (21:39 -0400)]
config.txt: fix placement of diff.noprefix
In git-config(1), diff.noprefix was placed in between
diff.mnemonicprefix and the list of mnemonic prefixes, which is
obviously incorrect and very confusing to readers. Now, it is located
after the end of the explanation of mnemonicprefix, which makes much
more sense.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Casey [Fri, 10 Sep 2010 16:13:38 +0000 (11:13 -0500)]
t/t4018: avoid two unnecessary sub-shell invocations
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 10 Sep 2010 00:29:40 +0000 (17:29 -0700)]
Merge branch 'maint'
* maint:
xdiff-interface.c: always trim trailing space from xfuncname matches
diff.c: call regfree to free memory allocated by regcomp when necessary
Brandon Casey [Thu, 9 Sep 2010 19:02:47 +0000 (14:02 -0500)]
t/t4018: test whether the word_regex patterns compile
Previously (
e3bf5e43), a test was added to test whether the builtin
xfuncname regular expressions could be compiled without error by regcomp.
Let's do the same for the word_regex patterns. This should help catch any
cross-platform incompatibilities that exist between the pattern creator's
system and the various platforms that the test suite is commonly run on.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Casey [Thu, 9 Sep 2010 19:02:46 +0000 (14:02 -0500)]
xdiff-interface.c: always trim trailing space from xfuncname matches
Generally, trailing space is removed from the string matched by the
xfuncname patterns. The exception is when the matched string exceeds the
length of the fixed-size buffer that it will be copied in to. But, a
string that exceeds the buffer can still contain trailing space in the
portion of the string that will be copied into the buffer. So, simplify
this code slightly, and just perform the trailing space removal always.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Casey [Thu, 9 Sep 2010 19:02:45 +0000 (14:02 -0500)]
diff.c: call regfree to free memory allocated by regcomp when necessary
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Casey [Thu, 9 Sep 2010 18:56:37 +0000 (13:56 -0500)]
t/t5510-fetch.sh: improve testing with explicit URL and merge spec
Commit
6106ce46 introduced a test to demonstrate fetch's failure to
retrieve any objects or update FETCH_HEAD when it was supplied a repository
URL and the current branch had a configured merge spec. This commit
expands the original test based on comments from Junio Hamano. In addition
to actually verifying that the fetch updates FETCH_HEAD correctly, and does
not update the current branch, two more tests are added to ensure that the
merge configuration is ignored even when the supplied URL matches the URL
of the remote configured for the branch.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Casey [Thu, 9 Sep 2010 18:56:36 +0000 (13:56 -0500)]
builtin/fetch.c: comment that branch->remote_name is usable when has_merge
Save future readers the trouble of tracing code to determine that the two
uses of branch->remote_name are safe when has_merge is set, by adding a
comment explaining that it is so.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Casey [Thu, 9 Sep 2010 19:15:58 +0000 (14:15 -0500)]
Makefile: use compat regex on IRIX 6.5
The IRIX 6.5 regex.h header file defines REG_STARTEND, but the feature does
not appear to work. Since REG_STARTEND is required for proper functioning
of git-grep, set NO_REGEX and use the alternative regex libraries in compat/
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Casey [Thu, 9 Sep 2010 19:15:57 +0000 (14:15 -0500)]
t/t7008: workaround broken handling of \000 by printf on IRIX
On IRIX 6.5, the printf utility in /usr/bin does not appear to handle the
\ddd notation according to POSIX. This printf appears to halt processing
of the string argument and ignore any additional characters in the string.
Work around this flaw by replacing the \000's with 'Q' and using the
q_to_nul helper function provided by test-lib.sh
This problem with printf is not apparent when using the Bash shell since
Bash implements a POSIX compatible printf function internally.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Oded Shimon [Thu, 9 Sep 2010 18:49:51 +0000 (21:49 +0300)]
Add --src/dst-prefix to git-formt-patch in git-rebase.sh
For the case of "diff.noprefix" in git-config, git-format-patch should
still output diff with standard prefixes for git-am
Signed-off-by: Oded Shimon <ods15@ods15.dyndns.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 9 Sep 2010 23:17:59 +0000 (16:17 -0700)]
install-webdoc: keep installed RelNotes-*.txt
Otherwise URLs in the wild that point at older release notes will become
dangling.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jens Lehmann [Tue, 7 Sep 2010 10:29:20 +0000 (12:29 +0200)]
t1020: Get rid of 'cd "$HERE"' at the start of each test
To achieve that, all cd commands which weren't inside a subshell had to
be put into a new one.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Nieder [Tue, 7 Sep 2010 08:22:53 +0000 (03:22 -0500)]
t2016 (checkout -p): add missing &&
Although the set_state command is not likely to fail, it is best to
stay in the habit of checking for failures.
Cc: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Nieder [Tue, 7 Sep 2010 01:52:27 +0000 (20:52 -0500)]
t1302 (core.repositoryversion): style tweaks
This test is from 2007, which is late enough for the style to be
recognizably modern but still a while ago. Freshen it up to
follow new best practices:
- guard setup commands with test_expect_setup, so errors at
that stage can be caught;
- use <<\EOF in preference to <<EOF, to save reviewers the
trouble of looking for variable interpolations;
- use test_cmp instead of test "$foo" = "$bar", for better
output with -v on failure;
- indent commands in subshells and let them span multiple lines;
- combine the two "gitdir required mode" tests that do not make
as much sense alone.
Cc: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Nieder [Tue, 7 Sep 2010 01:49:10 +0000 (20:49 -0500)]
t2105 (gitfile): add missing &&
Make sure early failures are not masked by later successes.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Brad King <brad.king@kitware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Nieder [Tue, 7 Sep 2010 01:47:07 +0000 (20:47 -0500)]
t1450 (fsck): remove dangling objects
The fsck test is generally careful to remove the corrupt objects
it inserts, but dangling objects are left behind due to some typos
and omissions. It is better to clean up more completely, to
simplify the addition of later tests. So:
- guard setup and cleanup with test_expect_success to catch
typos and errors;
- check both stdout and stderr when checking for empty fsck
output;
- use test_cmp empty file in place of test $(wc -l <file) = 0,
for better debugging output when running tests with -v;
- add a remove_object () helper and use it to replace broken
object removal code that forgot about the fanout in
.git/objects;
- disable gc.auto, to avoid tripping up object removal if the
number of objects ever reaches that threshold.
- use test_when_finished to ensure cleanup tasks are run and
succeed when tests fail;
- add a new final test that no breakage or dangling objects
was left behind.
While at it, add a brief description to test_description of the
history that is expected to persist between tests.
Part of a campaign to clean up subshell usage in tests.
Cc: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Nieder [Tue, 7 Sep 2010 01:42:54 +0000 (20:42 -0500)]
tests: subshell indentation stylefix
Format the subshells introduced by the previous patch (Several tests:
cd inside subshell instead of around, 2010-09-06) like so:
(
cd subdir &&
...
) &&
This is generally easier to read and has the nice side-effect that
this patch will show what commands are used in the subshell, making
it easier to check for lost environment variables and similar
behavior changes.
Cc: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 8 Sep 2010 16:17:01 +0000 (09:17 -0700)]
Merge branch 'tf/cleanup-builtin-help-headers'
* tf/cleanup-builtin-help-headers:
builtin.h: Move two functions definitions to help.h.
Junio C Hamano [Wed, 8 Sep 2010 16:17:01 +0000 (09:17 -0700)]
Merge branch 'jk/test-must-fail-missing'
* jk/test-must-fail-missing:
tests: make test_might_fail fail on missing commands
tests: make test_might_fail more verbose
tests: make test_must_fail fail on missing commands
tests: make test_must_fail more verbose
Junio C Hamano [Wed, 8 Sep 2010 16:17:01 +0000 (09:17 -0700)]
Merge branch 'jh/error-removing-missing-note'
* jh/error-removing-missing-note:
notes: Don't create (empty) commit when removing non-existing notes
Junio C Hamano [Wed, 8 Sep 2010 16:17:01 +0000 (09:17 -0700)]
Merge branch 'kf/askpass-config'
* kf/askpass-config:
Extend documentation of core.askpass and GIT_ASKPASS.
Allow core.askpass to override SSH_ASKPASS.
Add a new option 'core.askpass'.
Junio C Hamano [Wed, 8 Sep 2010 16:17:00 +0000 (09:17 -0700)]
Merge branch 'bc/maint-fetch-url-only'
* bc/maint-fetch-url-only:
builtin/fetch.c: ignore merge config when not fetching from branch's remote
t/t5510: demonstrate failure to fetch when current branch has merge ref
Junio C Hamano [Wed, 8 Sep 2010 16:17:00 +0000 (09:17 -0700)]
Merge branch 'jk/maint-pass-c-config-in-env'
* jk/maint-pass-c-config-in-env:
do not pass "git -c foo=bar" params to transport helpers
pass "git -c foo=bar" params through environment
Junio C Hamano [Wed, 8 Sep 2010 15:54:01 +0000 (08:54 -0700)]
Merge branch 'en/d-f-conflict-fix'
* en/d-f-conflict-fix:
fast-export: ensure that a renamed file is printed after all references
Johannes Sixt [Tue, 7 Sep 2010 19:33:02 +0000 (21:33 +0200)]
fast-export: ensure that a renamed file is printed after all references
t9350 sets up a commit where a file is both copied and renamed. The output
of fast-export for this commit should look like this:
author ...
committer ...
from :19
C "file2" "file4"
R "file2" "file5"
The order of the two modification lines is derived from the result that
the diff machinery produces.
060df62 (fast-export: Fix output order of D/F changes) inserted a qsort
call that modifies the order of the diff result. Unfortunately, qsort need
not be stable. Therefore, it is possible that the 'R' line appears before
the 'C' line and the resulting fast-import stream is incorrect.
Fix it by forcing that the rename entry is printed after all other
modification lines with the same file name.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Nicolas Pitre [Tue, 7 Sep 2010 00:29:57 +0000 (20:29 -0400)]
Documentation: move RelNotes into a directory of their own
There are 108 of them already. That's a bit more than one third of
all the files in the Documentation directory already, and still growing.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 7 Sep 2010 00:40:18 +0000 (17:40 -0700)]
Merge branch 'maint'
* maint:
revert: Fix trivial comment style issue
cache_tree_free: Fix small memory leak
Conflicts:
builtin/revert.c
Elijah Newren [Mon, 6 Sep 2010 21:53:24 +0000 (15:53 -0600)]
revert: Fix trivial comment style issue
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Mon, 6 Sep 2010 21:40:16 +0000 (15:40 -0600)]
cache_tree_free: Fix small memory leak
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 6 Sep 2010 23:57:05 +0000 (16:57 -0700)]
Merge branch 'jh/clean-exclude'
* jh/clean-exclude:
builtin/clean.c: Use STRING_LIST_INIT_NODUP.
Thiago Farina [Mon, 6 Sep 2010 23:32:55 +0000 (20:32 -0300)]
builtin/clean.c: Use STRING_LIST_INIT_NODUP.
Signed-off-by: Thiago Farina <tfransosi@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 6 Sep 2010 23:46:36 +0000 (16:46 -0700)]
Merge branch 'jl/maint-fix-test'
* jl/maint-fix-test:
Several tests: cd inside subshell instead of around
Conflicts:
t/t9600-cvsimport.sh
Jens Lehmann [Mon, 6 Sep 2010 18:39:54 +0000 (20:39 +0200)]
Several tests: cd inside subshell instead of around
Fixed all places where it was a straightforward change from cd'ing into a
directory and back via "cd .." to a cd inside a subshell.
Found these places with "git grep -w "cd \.\.".
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jens Lehmann [Mon, 6 Sep 2010 18:41:06 +0000 (20:41 +0200)]
t3404 & t7508: cd inside subshell instead of around
Fixed all places where it was a straightforward change from cd'ing into a
directory and back via "cd .." to a cd inside a subshell.
Found these places with "git grep -w "cd \.\.".
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 6 Sep 2010 07:12:04 +0000 (00:12 -0700)]
Merge branch 'maint'
* maint:
tag.c: whitespace breakages fix
Fix whitespace issue in object.c
t5505: add missing &&
Junio C Hamano [Mon, 6 Sep 2010 07:11:59 +0000 (00:11 -0700)]
Merge branch 'xx/trivial' into maint
* xx/trivial:
tag.c: whitespace breakages fix
Fix whitespace issue in object.c
t5505: add missing &&
Junio C Hamano [Mon, 6 Sep 2010 05:32:05 +0000 (22:32 -0700)]
tag.c: whitespace breakages fix
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jared Hance [Sun, 5 Sep 2010 19:36:33 +0000 (15:36 -0400)]
Fix whitespace issue in object.c
Change some expanded tabs (spaces) to tabs in object.c.
Signed-off-by: Jared Hance <jaredhance@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jens Lehmann [Sun, 5 Sep 2010 12:56:11 +0000 (14:56 +0200)]
t5505: add missing &&
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 4 Sep 2010 15:17:09 +0000 (08:17 -0700)]
Merge branch 'jl/submodule-ignore-diff'
* jl/submodule-ignore-diff:
checkout: Use submodule.*.ignore settings from .git/config and .gitmodules
checkout: Add test for diff.ignoreSubmodules
checkout: respect diff.ignoreSubmodules setting
Conflicts:
builtin/checkout.c
Junio C Hamano [Sat, 4 Sep 2010 15:15:36 +0000 (08:15 -0700)]
Merge branch 'ab/test-2'
* ab/test-2: (51 commits)
tests: factor HOME=$(pwd) in test-lib.sh
test-lib: use subshell instead of cd $new && .. && cd $old
tests: simplify "missing PREREQ" message
t/t0000-basic.sh: Run the passing TODO test inside its own test-lib
test-lib: Allow overriding of TEST_DIRECTORY
test-lib: Use "$GIT_BUILD_DIR" instead of "$TEST_DIRECTORY"/../
test-lib: Use $TEST_DIRECTORY or $GIT_BUILD_DIR instead of $(pwd) and ../
test: Introduce $GIT_BUILD_DIR
cvs tests: do not touch test CVS repositories shipped with source
t/t9602-cvsimport-branches-tags.sh: Add a PERL prerequisite
t/t9601-cvsimport-vendor-branch.sh: Add a PERL prerequisite
t/t7105-reset-patch.sh: Add a PERL prerequisite
t/t9001-send-email.sh: convert setup code to tests
t/t9001-send-email.sh: change from skip_all=* to prereq skip
t/t9001-send-email.sh: Remove needless PROG=* assignment
t/t9600-cvsimport.sh: change from skip_all=* to prereq skip
lib-patch-mode tests: change from skip_all=* to prereq skip
t/t3701-add-interactive.sh: change from skip_all=* to prereq skip
tests: Move FILEMODE prerequisite to lib-prereq-FILEMODE.sh
t/Makefile: Create test-results dir for smoke target
...
Conflicts:
t/t6035-merge-dir-to-symlink.sh
Junio C Hamano [Sat, 4 Sep 2010 05:45:58 +0000 (22:45 -0700)]
Merge branch 'js/detached-stash'
* js/detached-stash:
t3903: fix broken test_must_fail calls
detached-stash: update Documentation
detached-stash: tests of git stash with stash-like arguments
detached-stash: simplify git stash show
detached-stash: simplify git stash branch
detached-stash: refactor git stash pop implementation
detached-stash: simplify stash_drop
detached-stash: simplify stash_apply
detached-stash: work around git rev-parse failure to detect bad log refs
detached-stash: introduce parse_flags_and_revs function
Junio C Hamano [Sat, 4 Sep 2010 05:24:29 +0000 (22:24 -0700)]
Merge branch 'js/maint-reflog-beyond-horizon'
* js/maint-reflog-beyond-horizon:
t1503: fix broken test_must_fail calls
rev-parse: tests git rev-parse --verify master@{n}, for various n
sha1_name.c: use warning in preference to fprintf(stderr
rev-parse: exit with non-zero status if ref@{n} is not valid.
Junio C Hamano [Sat, 4 Sep 2010 05:23:49 +0000 (22:23 -0700)]
Merge branch 'dg/local-mod-error-messages'
* dg/local-mod-error-messages:
t7609-merge-co-error-msgs: test non-fast forward case too.
Move "show_all_errors = 1" to setup_unpack_trees_porcelain()
setup_unpack_trees_porcelain: take the whole options struct as parameter
Move set_porcelain_error_msgs to unpack-trees.c and rename it
Conflicts:
merge-recursive.c
Junio C Hamano [Sat, 4 Sep 2010 05:23:13 +0000 (22:23 -0700)]
Merge branch 'nd/maint-fix-replace'
* nd/maint-fix-replace:
parse_object: pass on the original sha1, not the replaced one
Nguyễn Thái Ngọc Duy [Fri, 3 Sep 2010 20:51:53 +0000 (22:51 +0200)]
parse_object: pass on the original sha1, not the replaced one
Commit
0e87c36 (object: call "check_sha1_signature" with the
replacement sha1) changed the first argument passed to
parse_object_buffer() from "sha1" to "repl". With that change,
the returned obj pointer has the replacement SHA1 in obj->sha1,
not the original one.
But when using lookup_commit() and then parse_commit() on a
commit, we get an object pointer with the original sha1, but
the commit content comes from the replacement commit.
So the result we get from using parse_object() is different
from the we get from using lookup_commit() followed by
parse_commit().
It looks much simpler and safer to fix this inconsistency by
passing "sha1" to parse_object_bufer() instead of "repl".
The commit comment should be used to tell the the replacement
commit is replacing another commit and why. So it should be
easy to see that we have a replacement commit instead of an
original one.
And it is not a problem if the content of the commit is not
consistent with the sha1 as cat-file piped to hash-object can
be used to see the difference.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Schalk, Ken [Wed, 1 Sep 2010 20:15:32 +0000 (13:15 -0700)]
RE: [PATCH] Avoid rename/add conflict when contents are identical
>Due to this this (and maybe all the tests) need to depend on the
>SYMLINKS prereq.
Here's a third attempt with no use of symlinks in the test:
Skip the entire rename/add conflict case if the file added on the
other branch has the same contents as the file being renamed. This
avoids giving the user an extra copy of the same file and presenting a
conflict that is confusing and pointless.
A simple test of this case has been added in
t/t3030-merge-recursive.sh.
Signed-off-by: Ken Schalk <ken.schalk@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 3 Sep 2010 16:43:45 +0000 (09:43 -0700)]
Merge branch 'ab/compat-regex'
* ab/compat-regex:
Fix compat/regex ANSIfication on MinGW
autoconf: regex library detection typofix
autoconf: don't use platform regex if it lacks REG_STARTEND
t/t7008-grep-binary.sh: un-TODO a test that needs REG_STARTEND
compat/regex: get rid of old-style definition
compat/regex: define out variables only used under RE_ENABLE_I18N
Change regerror() declaration from K&R style to ANSI C (C89)
compat/regex: get the gawk regex engine to compile within git
compat/regex: use the regex engine from gawk for compat
Conflicts:
compat/regex/regex.c
Junio C Hamano [Fri, 3 Sep 2010 16:43:45 +0000 (09:43 -0700)]
Merge branch 'nd/clone-depth-zero'
* nd/clone-depth-zero:
clone: warn users --depth is ignored in local clones
Junio C Hamano [Fri, 3 Sep 2010 16:43:44 +0000 (09:43 -0700)]
Merge branch 'jn/maint-doc-user-manual-html-doctype'
* jn/maint-doc-user-manual-html-doctype:
docs: fix Makefile dependency for user manual
Documentation: set a !DOCTYPE for user manual
Junio C Hamano [Fri, 3 Sep 2010 16:43:44 +0000 (09:43 -0700)]
Merge branch 'cb/maint-mergetool-no-tty'
* cb/maint-mergetool-no-tty:
mergetool: Remove explicit references to /dev/tty
Conflicts:
git-mergetool.sh
Junio C Hamano [Fri, 3 Sep 2010 16:43:44 +0000 (09:43 -0700)]
Merge branch 'jn/apply-filename-with-sp'
* jn/apply-filename-with-sp:
apply: handle traditional patches with space in filename
tests: exercise "git apply" with weird filenames
apply: split quoted filename handling into new function
Junio C Hamano [Fri, 3 Sep 2010 16:43:43 +0000 (09:43 -0700)]
Merge branch 'jn/merge-custom-no-trivial'
* jn/merge-custom-no-trivial:
t7606: Avoid using head as a file name
merge: let custom strategies intervene in trivial merges
t7606 (merge-theirs): modernize style
Junio C Hamano [Fri, 3 Sep 2010 16:43:42 +0000 (09:43 -0700)]
Merge branch 'jc/maint-doc-em-dash'
* jc/maint-doc-em-dash:
Work around em-dash handling in newer AsciiDoc
Junio C Hamano [Fri, 3 Sep 2010 16:43:42 +0000 (09:43 -0700)]
Merge branch 'mg/doc-bundle'
* mg/doc-bundle:
git-bundle.txt: Clarify rev-list-args restrictions
git-bundle.txt: whitespace cleanup
git-bundle.txt: Cleanup
Conflicts:
Documentation/git-bundle.txt
Junio C Hamano [Fri, 3 Sep 2010 16:43:42 +0000 (09:43 -0700)]
Merge branch 'jn/doc-backslash'
* jn/doc-backslash:
Documentation: remove stray backslash in show-branch discussion
Documentation: remove stray backslashes from "Fighting regressions" article
Documentation: do not convert ... operator to ellipses
Documentation: avoid stray backslash in user manual
Documentation: avoid stray backslashes in core tutorial
Documentation: remove stray backslashes in rev-parse manual
Documentation: remove backslash before ~ in fast-import manual
Documentation: remove stray backslash from "git bundle" manual
Documentation/technical: avoid stray backslash in parse-options API docs
Documentation: remove backslashes in manpage synopses
Documentation: clarify quoting in gitignore docs
Documentation: clarify quoting in "git rm" example
Documentation: add missing quotes to "git grep" examples
Documentation: clarify quoting in "git add" example
Documentation: unbreak regex in show-ref manual
Documentation: quoting trouble in "git rm" discussion
Documentation: tweak description of log.date
Junio C Hamano [Fri, 3 Sep 2010 16:43:42 +0000 (09:43 -0700)]
Merge branch 'jn/update-contrib-example-merge'
* jn/update-contrib-example-merge: (24 commits)
merge script: learn --[no-]rerere-autoupdate
merge script: notice @{-1} shorthand
merge script: handle --no-ff --no-commit correctly
merge script: --ff-only to disallow true merge
merge script: handle many-way octopus
merge script: handle -m --log correctly
merge script: forbid merge -s index
merge script: allow custom strategies
merge script: merge -X<option>
merge script: improve log message subject
merge script: refuse to merge during merge
merge script: tweak unmerged files message to match builtin
merge script: --squash, --ff from unborn branch are errors
fmt-merge-msg -m to override merge title
merge-base --independent to print reduced parent list in a merge
merge-base --octopus to mimic show-branch --merge-base
Documentation: add a SEE ALSO section for merge-base
t6200 (fmt-merge-msg): style nitpicks
t6010 (merge-base): modernize style
t7600 (merge): test merge from branch yet to be born
...
Junio C Hamano [Fri, 3 Sep 2010 16:43:41 +0000 (09:43 -0700)]
Merge branch 'jn/merge-renormalize'
* jn/merge-renormalize:
merge-recursive --renormalize
rerere: never renormalize
rerere: migrate to parse-options API
t4200 (rerere): modernize style
ll-merge: let caller decide whether to renormalize
ll-merge: make flag easier to populate
Documentation/technical: document ll_merge
merge-trees: let caller decide whether to renormalize
merge-trees: push choice to renormalize away from low level
t6038 (merge.renormalize): check that it can be turned off
t6038 (merge.renormalize): try checkout -m and cherry-pick
t6038 (merge.renormalize): style nitpicks
Don't expand CRLFs when normalizing text during merge
Try normalizing files to avoid delete/modify conflicts when merging
Avoid conflicts when merging branches with mixed normalization
Conflicts:
builtin/rerere.c
t/t4200-rerere.sh
Junio C Hamano [Fri, 3 Sep 2010 16:39:38 +0000 (09:39 -0700)]
Sync with 1.7.2.3
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 3 Sep 2010 16:38:53 +0000 (09:38 -0700)]
Git 1.7.2.3
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thiago Farina [Mon, 30 Aug 2010 03:30:22 +0000 (00:30 -0300)]
builtin/merge_recursive.c: Add an usage string and make use of it.
This improves the usage output by adding builtin_merge_recursive_usage string
that follows the same pattern used by the other builtin commands.
The previous output for git merger-recursive was:
usage: merge-recursive <base>... -- <head> <remote> ...
Now the output is:
usage: git merge-recursive <base>... -- <head> <remote> ...
Since cmd_merge_recursive is used to handle four different commands we need
the %s in the usage string, so the following example:
$ git merge-subtree -h
Will output:
usage: git merge-subtree <base>... -- <head> <remote> ...
Signed-off-by: Thiago Farina <tfransosi@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jens Lehmann [Wed, 1 Sep 2010 21:28:27 +0000 (23:28 +0200)]
t7406 & t7407: add missing && at end of lines
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jens Lehmann [Wed, 1 Sep 2010 21:01:49 +0000 (23:01 +0200)]
t7405: cd inside subshell instead of around
Instead of using `cd dir && (...) && cd..` use `(cd dir && ...)`
This ensures that the test doesn't get caught in the subdirectory if there
is an error in the subshell.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matthieu Moy [Fri, 3 Sep 2010 15:25:33 +0000 (17:25 +0200)]
t7609-merge-co-error-msgs: test non-fast forward case too.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matthieu Moy [Thu, 2 Sep 2010 16:08:15 +0000 (18:08 +0200)]
Move "show_all_errors = 1" to setup_unpack_trees_porcelain()
Not only this makes the code clearer since setting up the porcelain error
message is meant to work with show_all_errors, but this fixes a call to
setup_unpack_trees_porcelain() in git_merge_trees() which did not set
show_all_errors.
add_rejected_path() used to double-check whether it was running in
plumbing mode. This check was ineffective since it was setting
show_all_errors too late for traverse_trees() to see it, and is made
useless by this patch. Remove it.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matthieu Moy [Thu, 2 Sep 2010 11:57:34 +0000 (13:57 +0200)]
setup_unpack_trees_porcelain: take the whole options struct as parameter
This is a preparation patch to let setup_unpack_trees_porcelain set
show_all_errors itself.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matthieu Moy [Thu, 2 Sep 2010 11:57:33 +0000 (13:57 +0200)]
Move set_porcelain_error_msgs to unpack-trees.c and rename it
The function is currently dealing only with error messages, but the
intent of calling it is really to notify the unpack-tree mechanics that
it is running in porcelain mode.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 1 Sep 2010 21:17:32 +0000 (14:17 -0700)]
Prepare for 1.7.3
Signed-off-by: Junio C Hamano <gitster@pobox.com>