git.osdn.net Git - tomoyo/tomoyo-test1.git/log

drm/omap: dsi: lp/hs switching support for transfer()

Integrate low-power / high-speed bus switching into transfer
function and drop the omapdrm specific enable_hs() callback.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-24-tomi.valkeinen@ti.com

drm/omap: panel-dsi-cm: use bulk regulator API

Use bulk regulator API to simplify the code. This also switches
from _optional variant to normal variant, which will provide a
dummy regulator (i.e. if some always-enabled regulator is not
described in DT).

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-23-tomi.valkeinen@ti.com

drm/omap: dsi: use pixel-format and mode from attach

In order to reduce the amount of custom functionality, this moves
handling of pixel format and DSI mode from set_config() to dsi
attach.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-22-tomi.valkeinen@ti.com

drm/omap: dsi: drop useless sync()

The DSI sync() function only locks the bus and then releases
it again. Currently the only invocation is directly before
update(), which locks the bus anyways.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-21-tomi.valkeinen@ti.com

drm/omap: dsi: drop unused enable_te()

enable_te() is not used, so the custom API can be dropped.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-20-tomi.valkeinen@ti.com

drm/omap: dsi: drop unused get_te()

The get_te() callback is not used, so we can drop the
custom API.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-19-tomi.valkeinen@ti.com

drm/omap: dsi: drop unused memory_read()

memory_read is not used, so we can drop the code.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-18-tomi.valkeinen@ti.com

drm/omap: panel-dsi-cm: use common MIPI DCS 1.3 defines

Drop local definition of common MIPI DCS 1.3 defines.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-17-tomi.valkeinen@ti.com

drm/omap: panel-dsi-cm: drop hardcoded VC

Use dsi->channel everywhere, which originates from DT.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-16-tomi.valkeinen@ti.com

drm/omap: dsi: request VC via mipi_dsi_attach

Drop custom request_vc/release_vc callbacks by using the
generic mipi_dsi_attach/mipi_dsi_detach functions.

To use mipi_dsi_attach() we need to fill in the mipi_dsi_device fields,
and some of these fields overlap with the fields in omap_dss_dsi_config.
In later patches the latter will get dropped.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-15-tomi.valkeinen@ti.com

drm/omap: panel-dsi-cm: use DSI helpers

After converting the driver to mipi_dsi_device we can use the generic
message helpers to simplify the driver a lot.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-14-tomi.valkeinen@ti.com

drm/omap: dsi: introduce mipi_dsi_host

This moves from custom platform driver infrastructure to mipi_dsi_host
and mipi_dsi_device. Note, that this is a graduate step and the driver
only uses the devices types and transfer function, but not yet the new
device binding style or drm_panel.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-13-tomi.valkeinen@ti.com

drm/omap: dsi: switch dsi_vc_send_long/short to mipi_dsi_msg

Simplify the DSI encoder by using mipi_dsi_msg for
dsi_vc_send_long and dsi_vc_send_short. Further improvements
require cleaning up the channel allocation code first.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-12-tomi.valkeinen@ti.com

drm/omap: dsi: simplify read functions

Simplify the read related message handling by using the functionality
provided by CONFIG_DRM_MIPI_DSI.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-11-tomi.valkeinen@ti.com

drm/omap: dsi: simplify write function

Simplify the write related messages handling by using the functionality
provided by CONFIG_DRM_MIPI_DSI.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-10-tomi.valkeinen@ti.com

drm/omap: dsi: drop virtual channel logic

This drops the virtual channel logic. Afterwards DSI clients
request their channel number and get the virtual channel with
the same number or -EBUSY if already in use.

The change here is not strictly speaking correct, as it combines the VC
(DSI's "configuration block") and virtual channel ID (the ID sent in the
DSI packets). But as we currently only support a single DSI command mode
panel, this works fine: we always use VC0, and VC ID 0.

This needs more work to support video mode panels, but that can be done
after moving to DRM bridge and panel model, after which we can do that
work with the proper APIs.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-9-tomi.valkeinen@ti.com

drm/omap: dsi: unexport specific data transfer functions

After converting all DSI drivers, unexport the specific transfer
functions.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-8-tomi.valkeinen@ti.com

drm/omap: panel-dsi-cm: convert to transfer API

This converts the panel-dsi-cm driver to use the transfer
API instead of specific functions, so that the specific
functions can be unexported and squashed into the generic
transfer function.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-7-tomi.valkeinen@ti.com

drm/omap: dsi: add generic transfer function

This prepares the driver for becoming a mipi_dsi_host implementation,
which provides a generic transfer function instead of all kind of
different read/write functions. The implementation will become more
elegant after unexporting the specific functions in the following
patches.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-6-tomi.valkeinen@ti.com

drm/omap: constify write buffers

The write buffers are not modified, so they can be constant.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-5-tomi.valkeinen@ti.com

drm/omap: dsi: use MIPI_DSI_FMT_* instead of OMAP_DSS_DSI_FMT_*

This replaces OMAP specific enum for pixel format with
common implementation.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-4-tomi.valkeinen@ti.com

drm/omap: drop unused dsi.configure_pins

The panel-dsi-cm's ddata->pin_config is always NULL, so this
callback is never called. Instead the DSI encoder gets the pin
configuration directly from DT.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-3-tomi.valkeinen@ti.com

Revert "drm/omap: dss: Remove unused omap_dss_device operations"

This reverts commit e086558ae923 ("drm/omap: dss: Remove unused
omap_dss_device operations")

This is still needed by DSI. E.g. unloading modules without this will
cause a crash.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-2-tomi.valkeinen@ti.com

drm/omap: Enable COLOR_ENCODING and COLOR_RANGE properties for planes

Adds support for COLOR_ENCODING and COLOR_RANGE properties to
omap_plane.c and dispc.c. The supported encodings and ranges are
presets are:

For COLOR_ENCODING:
- YCbCr BT.601 (default)
- YCbCr BT.709

For COLOR_RANGE:
- YCbCr limited range
- YCbCr full range (default)

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103080310.164453-6-tomi.valkeinen@ti.com

drm/omap: rearrange includes in omapdss.h

Drop "uapi/" and rearrange alphabetically.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103080310.164453-5-tomi.valkeinen@ti.com

drm/omap: Implement CTM property for CRTC using OVL managers CPR matrix

Implement CTM color management property for OMAP CRTC using DSS
overlay manager's Color Phase Rotation matrix. The CPR matrix does not
exactly match the CTM property documentation. On DSS the CPR matrix is
applied after gamma table look up. However, it seems stupid to add a
custom property just for that.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103080310.164453-4-tomi.valkeinen@ti.com

drm/omap: use degamma property for gamma table

omapdrm supports gamma via GAMMA_LUT property. However, the HW we have
is:

gamma -> ctm -> out

instead of what the model DRM framework uses:

ctm -> gamma -> out

As the following patches add CTM support for omapdrm, lets first fix the
gamma.

This patch changes the property from GAMMA_LUT to DEGAMMA_LUT, and thus
we will have:

degamma -> ctm -> out

and the legacy ioctl will continue working as before.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103080310.164453-3-tomi.valkeinen@ti.com

drm: add legacy support for using degamma for gamma

The DRM core handles legacy gamma-set ioctl by setting GAMMA_LUT and
clearing CTM and DEGAMMA_LUT.

This works fine on HW where we have either:

degamma -> ctm -> gamma -> out

or

ctm -> gamma -> out

However, if the HW has gamma table before ctm, the atomic property
should be DEGAMMA_LUT, and thus we have:

degamma -> ctm -> out

This is fine for userspace which sets gamma table using the properties,
as the userspace can check for the existence of gamma & degamma, but the
legacy gamma-set ioctl does not work.

Change the DRM core to use DEGAMMA_LUT instead of GAMMA_LUT when the
latter is unavailable.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201211114237.213288-3-tomi.valkeinen@ti.com

drm: automatic legacy gamma support

To support legacy gamma ioctls the drivers need to set
drm_crtc_funcs.gamma_set either to a custom implementation or to
drm_atomic_helper_legacy_gamma_set. Most of the atomic drivers do the
latter.

We can simplify this by making the core handle it automatically.

Move the drm_atomic_helper_legacy_gamma_set() functionality into
drm_color_mgmt.c to make drm_mode_gamma_set_ioctl() use
drm_crtc_funcs.gamma_set if set or GAMMA_LUT property if not.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201211114237.213288-2-tomi.valkeinen@ti.com

udlfb: Fix memory leak in dlfb_usb_probe

The dlfb_alloc_urb_list function is called in dlfb_usb_probe function,
after that if an error occurs, the dlfb_free_urb_list function need to
be called.

BUG: memory leak
unreferenced object 0xffff88810adde100 (size 32):
  comm "kworker/1:0", pid 17, jiffies 4294947788 (age 19.520s)
  hex dump (first 32 bytes):
    10 30 c3 0d 81 88 ff ff c0 fa 63 12 81 88 ff ff  .0........c.....
    00 30 c3 0d 81 88 ff ff 80 d1 3a 08 81 88 ff ff  .0........:.....
  backtrace:
    [<0000000019512953>] kmalloc include/linux/slab.h:552 [inline]
    [<0000000019512953>] kzalloc include/linux/slab.h:664 [inline]
    [<0000000019512953>] dlfb_alloc_urb_list drivers/video/fbdev/udlfb.c:1892 [inline]
    [<0000000019512953>] dlfb_usb_probe.cold+0x289/0x988 drivers/video/fbdev/udlfb.c:1704
    [<0000000072160152>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396
    [<00000000a8d6726f>] really_probe+0x159/0x480 drivers/base/dd.c:554
    [<00000000c3ce4b0e>] driver_probe_device+0x84/0x100 drivers/base/dd.c:738
    [<00000000e942e01c>] __device_attach_driver+0xee/0x110 drivers/base/dd.c:844
    [<00000000de0a5a5c>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:431
    [<00000000463fbcb4>] __device_attach+0x122/0x250 drivers/base/dd.c:912
    [<00000000b881a711>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:491
    [<00000000364bbda5>] device_add+0x5ac/0xc30 drivers/base/core.c:2936
    [<00000000eecca418>] usb_set_configuration+0x9de/0xb90 drivers/usb/core/message.c:2159
    [<00000000edfeca2d>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238
    [<000000001830872b>] usb_probe_device+0x5c/0x140 drivers/usb/core/driver.c:293
    [<00000000a8d6726f>] really_probe+0x159/0x480 drivers/base/dd.c:554
    [<00000000c3ce4b0e>] driver_probe_device+0x84/0x100 drivers/base/dd.c:738
    [<00000000e942e01c>] __device_attach_driver+0xee/0x110 drivers/base/dd.c:844
    [<00000000de0a5a5c>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:431

Reported-by: syzbot+c9e365d7f450e8aa615d@syzkaller.appspotmail.com
Signed-off-by: Zqiang <qiang.zhang@windriver.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215063022.16746-1-qiang.zhang@windriver.com

drm/hisilicon: Fix use-after-free

Fix the problem of dev being released twice.
------------[ cut here ]------------
refcount_t: underflow; use-after-free.
WARNING: CPU: 75 PID: 15700 at lib/refcount.c:28 refcount_warn_saturate+0xd4/0x150
CPU: 75 PID: 15700 Comm: rmmod Tainted: G E 5.10.0-rc3+ #3
Hardware name: Huawei TaiShan 200 (Model 2280)/BC82AMDDA, BIOS 0.88 07/24/2019
pstate: 40400009 (nZcv daif +PAN -UAO -TCO BTYPE=--)
pc : refcount_warn_saturate+0xd4/0x150
lr : refcount_warn_saturate+0xd4/0x150
sp : ffff2028150cbc00
x29: ffff2028150cbc00 x28: ffff2028150121c0
x27: 0000000000000000 x26: 0000000000000000
x25: 0000000000000000 x24: 0000000000000003
x23: 0000000000000000 x22: ffff2028150cbc90
x21: ffff2020038a30a8 x20: ffff2028150cbc90
x19: ffff0020cd938020 x18: 0000000000000010
x17: 0000000000000000 x16: 0000000000000000
x15: ffffffffffffffff x14: ffff2028950cb88f
x13: ffff2028150cb89d x12: 0000000000000000
x11: 0000000005f5e0ff x10: ffff2028150cb800
x9 : 00000000ffffffd0 x8 : 75203b776f6c6672
x7 : ffff800011a6f7c8 x6 : 0000000000000001
x5 : 0000000000000000 x4 : 0000000000000000
x3 : 0000000000000000 x2 : ffff202ffe2f9dc0
x1 : ffffa02fecf40000 x0 : 0000000000000026
Call trace:
refcount_warn_saturate+0xd4/0x150
devm_drm_dev_init_release+0x50/0x70
devm_action_release+0x20/0x30
release_nodes+0x13c/0x218
devres_release_all+0x80/0x170
device_release_driver_internal+0x128/0x1f0
driver_detach+0x6c/0xe0
bus_remove_driver+0x74/0x100
driver_unregister+0x34/0x60
pci_unregister_driver+0x24/0xd8
hibmc_pci_driver_exit+0x14/0xe858 [hibmc_drm]
__arm64_sys_delete_module+0x1fc/0x2d0
el0_svc_common.constprop.3+0xa8/0x188
do_el0_svc+0x80/0xa0
el0_sync_handler+0x8c/0xb0
el0_sync+0x15c/0x180
CPU: 75 PID: 15700 Comm: rmmod Tainted: G E 5.10.0-rc3+ #3
Hardware name: Huawei TaiShan 200 (Model 2280)/BC82AMDDA, BIOS 0.88 07/24/2019
Call trace:
dump_backtrace+0x0/0x208
show_stack+0x2c/0x40
dump_stack+0xd8/0x10c
__warn+0xac/0x128
report_bug+0xcc/0x180
bug_handler+0x24/0x78
call_break_hook+0x80/0xa0
brk_handler+0x28/0x68
do_debug_exception+0x9c/0x148
el1_sync_handler+0x7c/0x128
el1_sync+0x80/0x100
refcount_warn_saturate+0xd4/0x150
devm_drm_dev_init_release+0x50/0x70
devm_action_release+0x20/0x30
release_nodes+0x13c/0x218
devres_release_all+0x80/0x170
device_release_driver_internal+0x128/0x1f0
driver_detach+0x6c/0xe0
bus_remove_driver+0x74/0x100
driver_unregister+0x34/0x60
pci_unregister_driver+0x24/0xd8
hibmc_pci_driver_exit+0x14/0xe858 [hibmc_drm]
__arm64_sys_delete_module+0x1fc/0x2d0
el0_svc_common.constprop.3+0xa8/0x188
do_el0_svc+0x80/0xa0
el0_sync_handler+0x8c/0xb0
el0_sync+0x15c/0x180
---[ end trace 00718630d6e5ff18 ]---

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1607941973-32287-1-git-send-email-tiantao6@hisilicon.com

drm/vc4: kms: Convert to atomic helpers

Now that the semaphore is gone, our atomic_commit implementation is
basically drm_atomic_helper_commit with a somewhat custom commit_tail,
the main difference being that we're using wait_for_flip_done instead of
wait_for_vblanks used in the drm_atomic_helper_commit_tail helper.

Let's switch to using drm_atomic_helper_commit.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201204151138.1739736-8-maxime@cerno.tech

drm/vc4: kms: Remove async modeset semaphore

Now that we have proper ordering guaranteed by the previous patch, the
semaphore is redundant and can be removed.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201204151138.1739736-7-maxime@cerno.tech

drm/vc4: kms: Remove unassigned_channels from the HVS state

The HVS state now has both unassigned_channels that reflects the
channels that are not used in the associated state, and the in_use
boolean for each channel that says whether or not a particular channel
is in use.

Both express pretty much the same thing, and we need the in_use variable
to properly track the commits, so let's get rid of unassigned_channels.

Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201204151138.1739736-6-maxime@cerno.tech

drm/vc4: kms: Wait on previous FIFO users before a commit

If we're having two subsequent, non-blocking, commits on two different
CRTCs that share no resources, there's no guarantee on the order of
execution of both commits.

However, the second one will consider the first one as the old state,
and will be in charge of freeing it once that second commit is done.

If the first commit happens after that second commit, it might access
some resources related to its state that has been freed, resulting in a
use-after-free bug.

The standard DRM objects are protected against this, but our HVS private
state isn't so let's make sure we wait for all the previous FIFO users
to finish their commit before going with our own.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201204151138.1739736-5-maxime@cerno.tech

drm/vc4: Simplify a bit the global atomic_check

When we can't allocate a new channel, we can simply return instead of
having to handle both cases, and that simplifies a bit the code.

Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201204151138.1739736-4-maxime@cerno.tech

drm: Document use-after-free gotcha with private objects

The private objects have a gotcha that could result in a use-after-free,
make sure it's properly documented.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201204151138.1739736-3-maxime@cerno.tech

drm: Introduce an atomic_commit_setup function

Private objects storing a state shared across all CRTCs need to be
carefully handled to avoid a use-after-free issue.

The proper way to do this to track all the commits using that shared
state and wait for the previous commits to be done before going on with
the current one to avoid the reordering of commits that could occur.

However, this commit setup needs to be done after
drm_atomic_helper_setup_commit(), because before the CRTC commit
structure hasn't been allocated before, and before the workqueue is
scheduled, because we would be potentially reordered already otherwise.

That means that drivers currently have to roll their own
drm_atomic_helper_commit() function, even though it would be identical
if not for the commit setup.

Let's introduce a hook to do so that would be called as part of
drm_atomic_helper_commit, allowing us to reuse the atomic helpers.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201204151138.1739736-2-maxime@cerno.tech

Merge drm/drm-next into drm-misc-next

Required backmerge since we will be based on top of v5.11, and there
has been a request to backmerge already to upstream some features.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

Merge tag 'drm-misc-next-2020-11-27-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for 5.11:

UAPI Changes:

Cross-subsystem Changes:

* char/agp: Disable frontend without CONFIG_DRM_LEGACY
* mm: Fix fput in mmap error path; Introduce vma_set_file() to change
   vma->vm_file

Core Changes:

* dma-buf: Use sgtables in system heap; Move heap helpers to CMA-heap code;
   Skip sync for unmapped buffers; Alloc higher order pages is available;
   Respect num_fences when initializing shared fence list
* doc: Improvements around DRM modes and SCALING_FILTER
* Pass full state to connector atomic functions + callee updates
* Cleanups
* shmem: Map pages with caching by default; Cleanups
* ttm: Fix DMA32 for global page pool
* fbdev: Cleanups
* fb-helper: Update framebuffer after userspace writes; Unmap console buffer
   during shutdown; Rework damage handling of shadow framebuffer

Driver Changes:

* amdgpu: Multi-hop fixes, Clenaups
* imx: Fix rotation for Vivante tiled formats; Support nearest-neighour
   skaling; Cleanups
* mcde: Fix RGB formats; Support DPI output; Cleanups
* meson: HDMI clock fixes
* panel: Add driver and bindings for Innolux N125HCE-GN1
* panel/s6e63m0: More backlight levels; Fix init; Cleanups
* via: Clenunps
* virtio: Use fence ID for handling fences; Cleanups

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201127083055.GA29139@linux-uq9g

drm/panel: khadas: Fix error code in khadas_ts050_panel_add()

There is a copy and paste bug so it didn't return the correct error
code.

Fixes: b215212117f7 ("drm: panel: add Khadas TS050 panel driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/X9NEfmgGilaXJs2R@mwanda

drm/amdkfd: fix ttm size refactor fallout

I guess Christian didn't compile test amdkfd.

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Fixes: e11bfb99d6ec ("drm/ttm: cleanup BO size handling v3")
Cc: Christian König <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com> (v1)
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201214191725.3899147-1-daniel.vetter@ffwll.ch

Merge tag 'drm-next-2020-12-11' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie:
"Not a huge amount of big things here, AMD has support for a few new HW
  variants (vangogh, green sardine, dimgrey cavefish), Intel has some
  more DG1 enablement. We have a few big reworks of the TTM layers and
  interfaces, GEM and atomic internal API reworks cross tree. fbdev is
  marked orphaned in here as well to reflect the current reality.

  core:
   - documentation updates
   - deprecate DRM_FORMAT_MOD_NONE
   - atomic crtc enable/disable rework
   - GEM convert drivers to gem object functions
   - remove SCATTER_LIST_MAX_SEGMENT

  sched:
   - avoid infinite waits

  ttm:
   - remove AGP support
   - don't modify caching for swapout
   - ttm pinning rework
   - major TTM reworks
   - new backend allocator
   - multihop support

  vram-helper:
   - top down BO placement fix
   - TTM changes
   - GEM object support

  displayport:
   - DP 2.0 DPCD prep work
   - DP MST extended DPCD caps

  fbdev:
   - mark as orphaned

  amdgpu:
   - Initial Vangogh support
   - Green Sardine support
   - Dimgrey Cavefish support
   - SG display support for renoir
   - SMU7 improvements
   - gfx9+ modiifier support
   - CI BACO fixes

  radeon:
   - expose voltage via hwmon on SUMO

  amdkfd:
   - fix unique id handling

  i915:
   - more DG1 enablement
   - bigjoiner support
   - integer scaling filter support
   - async flip support
   - ICL+ DSI command mode
   - Improve display shutdown
   - Display refactoring
   - eLLC machine fbdev loading fix
   - dma scatterlist fixes
   - TGL hang fixes
   - eLLC display buffer caching on SKL+
   - MOCS PTE seeting for gen9+

  msm:
   - Shutdown hook
   - GPU cooling device support
   - DSI 7nm and 10nm phy/pll updates
   - sm8150/sm2850 DPU support
   - GEM locking re-work
   - LLCC system cache support

  aspeed:
   - sysfs output config support

  ast:
   - LUT fix
   - new display mode

  gma500:
   - remove 2d framebuffer accel

  panfrost:
   - move gpu reset to a worker

  exynos:
   - new HDMI mode support

  mediatek:
   - MT8167 support
   - yaml bindings
   - MIPI DSI phy code moved

  etnaviv:
   - new perf counter
   - more lockdep annotation

  hibmc:
   - i2c DDC support

  ingenic:
   - pixel clock reset fix
   - reserved memory support
   - allow both DMA channels at once
   - different pixel format support
   - 30/24/8-bit palette modes

  tilcdc:
   - don't keep vblank irq enabled

  vc4:
   - new maintainer added
   - DSI registration fix

  virtio:
   - blob resource support
   - host visible and cross-device support
   - uuid api support"

* tag 'drm-next-2020-12-11' of git://anongit.freedesktop.org/drm/drm: (1754 commits)
  drm/amdgpu: Initialise drm_gem_object_funcs for imported BOs
  drm/amdgpu: fix size calculation with stolen vga memory
  drm/amdgpu: remove amdgpu_ttm_late_init  and amdgpu_bo_late_init
  drm/amdgpu: free the pre-OS console framebuffer after the first modeset
  drm/amdgpu: enable runtime pm using BACO on CI dGPUs
  drm/amdgpu/cik: enable BACO reset on Bonaire
  drm/amd/pm: update smu10.h WORKLOAD_PPLIB setting for raven
  drm/amd/pm: remove one unsupported smu function for vangogh
  drm/amd/display: setup system context for APUs
  drm/amd/display: add S/G support for Vangogh
  drm/amdkfd: Fix leak in dmabuf import
  drm/amdgpu: use AMDGPU_NUM_VMID when possible
  drm/amdgpu: fix sdma instance fw version and feature version init
  drm/amd/pm: update driver if version for dimgrey_cavefish
  drm/amd/display: 3.2.115
  drm/amd/display: [FW Promotion] Release 0.0.45
  drm/amd/display: Revert DCN2.1 dram_clock_change_latency update
  drm/amd/display: Enable gpu_vm_support for dcn3.01
  drm/amd/display: Fixed the audio noise during mode switching with HDCP mode on
  drm/amd/display: Add wm table for Renoir
  ...

drm/ttm: cleanup BO size handling v3

Based on an idea from Dave, but cleaned up a bit.

We had multiple fields for essentially the same thing.

Now bo->base.size is the original size of the BO in
arbitrary units, usually bytes.

bo->mem.num_pages is the size in number of pages in the
resource domain of bo->mem.mem_type.

v2: use the GEM object size instead of the BO size
v3: fix printks in some places

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com> (v1)
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/406831/

drm/drv: Remove invalid assignments

it's not necessary to assign a value of 0 to ret here, because if
the previous functions were executed correctly, ret would be 0.

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/1607653037-37785-1-git-send-email-tiantao6@hisilicon.com

Linux 5.10

Merge tag 'x86-urgent-2020-12-13' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Thomas Gleixner:
"A set of x86 and membarrier fixes:

   - Correct a few problems in the x86 and the generic membarrier
     implementation. Small corrections for assumptions about visibility
     which have turned out not to be true.

   - Make the PAT bits for memory encryption correct vs 4K and 2M/1G
     page table entries as they are at a different location.

   - Fix a concurrency issue in the the local bandwidth readout of
     resource control leading to incorrect values

   - Fix the ordering of allocating a vector for an interrupt. The order
     missed to respect the provided cpumask when the first attempt of
     allocating node local in the mask fails. It then tries the node
     instead of trying the full provided mask first. This leads to
     erroneous error messages and breaking the (user) supplied affinity
     request. Reorder it.

   - Make the INT3 padding detection in optprobe work correctly"

* tag 'x86-urgent-2020-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/kprobes: Fix optprobe to detect INT3 padding correctly
  x86/apic/vector: Fix ordering in vector assignment
  x86/resctrl: Fix incorrect local bandwidth when mba_sc is enabled
  x86/mm/mem_encrypt: Fix definition of PMD_FLAGS_DEC_WP
  membarrier: Execute SYNC_CORE on the calling thread
  membarrier: Explicitly sync remote cores when SYNC_CORE is requested
  membarrier: Add an actual barrier before rseq_preempt()
  x86/membarrier: Get rid of a dubious optimization

Merge tag 'block-5.10-2020-12-12' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
"This should be it for 5.10.

  Mike and Song looked into the warning case, and thankfully it appears
  the fix was pretty trivial - we can just change the md device chunk
  type to unsigned int to get rid of it. They cannot currently be < 0,
  and nobody is checking for that either.

  We're reverting the discard changes as the corruption reports came in
  very late, and there's just no time to attempt to deal with it at this
  point. Reverting the changes in question is the right call for 5.10"

* tag 'block-5.10-2020-12-12' of git://git.kernel.dk/linux-block:
  md: change mddev 'chunk_sectors' from int to unsigned
  Revert "md: add md_submit_discard_bio() for submitting discard bio"
  Revert "md/raid10: extend r10bio devs to raid disks"
  Revert "md/raid10: pull codes that wait for blocked dev into one function"
  Revert "md/raid10: improve raid10 discard request"
  Revert "md/raid10: improve discard request for far layout"
  Revert "dm raid: remove unnecessary discard limits for raid10"

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
"Five small fixes.  Four in drivers:

   - hisi_sas: fix internal queue timeout

   - be2iscsi: revert a prior fix causing problems

   - bnx2i: add missing dependency

   - storvsc: late arriving revert of a problem fix

  and one in the core.

  The core one is a minor change to stop paying attention to the busy
  count when returning out of resources because there's a race window
  where the queue might not restart due to missing returning I/O"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  Revert "scsi: storvsc: Validate length of incoming packet in storvsc_on_channel_callback()"
  scsi: hisi_sas: Select a suitable queue for internal I/Os
  scsi: core: Fix race between handling STS_RESOURCE and completion
  scsi: be2iscsi: Revert "Fix a theoretical leak in beiscsi_create_eqs()"
  scsi: bnx2i: Requires MMU

Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux

Pull i2c fix from Wolfram Sang:
"Bugfix for the AT24 EEPROM driver"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
misc: eeprom: at24: fix NVMEM name with custom AT24 device name

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
"Bugfixes for ARM, x86 and tools"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  tools/kvm_stat: Exempt time-based counters
  KVM: mmu: Fix SPTE encoding of MMIO generation upper half
  kvm: x86/mmu: Use cpuid to determine max gfn
  kvm: svm: de-allocate svm_cpu_data for all cpus in svm_cpu_uninit()
  selftests: kvm/set_memory_region_test: Fix race in move region test
  KVM: arm64: Add usage of stage 2 fault lookup level in user_mem_abort()
  KVM: arm64: Fix handling of merging tables into a block entry
  KVM: arm64: Fix memory leak on stage2 update of a valid PTE

Merge tag 'for-linus-5.10c-rc8-tag' of git://git./linux/kernel/git/xen/tip

Pull xen fixes from Juergen Gross:
"A short series fixing a regression introduced in 5.9 for running as
  Xen dom0 on a system with NVMe backed storage"

* tag 'for-linus-5.10c-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: don't use page->lru for ZONE_DEVICE memory
  xen: add helpers for caching grant mapping pages

Merge tag 'riscv-for-linus-5.10-rc8' of git://git./linux/kernel/git/riscv/linux

Pull RISC-V fix from Palmer Dabbelt:
"Just one fix. It's nothing critical, just a randconfig that wasn't
  building. That said, it does seem pretty safe and is technically a
  regression so I'm sending it along for 5.10:

   - define get_cycles64() all the time, as it's used by most
     configurations"

* tag 'riscv-for-linus-5.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: Define get_cycles64() regardless of M-mode

Merge tag 'io_uring-5.10-2020-12-11' of git://git.kernel.dk/linux-block

Pull io_uring fixes from Jens Axboe:
"Two fixes in here, fixing issues introduced in this merge window"

* tag 'io_uring-5.10-2020-12-11' of git://git.kernel.dk/linux-block:
io_uring: fix file leak on error path of io ctx creation
io_uring: fix mis-seting personality's creds

Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

Pull input fixes from Dmitry Torokhov:

- a fix for cm109 stomping on its own control URB if it tries to toggle
   buzzer immediately after userspace opens input device (found by
   syzcaller)

- another fix for Raydium touchscreens that do not like splitting
   command transfers

- quirks for i8042, soc_button_array, and goodix drivers to make them
   work better with certain hardware.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: goodix - add upside-down quirk for Teclast X98 Pro tablet
  Input: cm109 - do not stomp on control URB
  Input: i8042 - add Acer laptops to the i8042 reset list
  Input: cros_ec_keyb - send 'scancodes' in addition to key events
  Input: soc_button_array - add Lenovo Yoga Tablet2 1051L to the dmi_use_low_level_irq list
  Input: raydium_ts_i2c - do not split tx transactions

md: change mddev 'chunk_sectors' from int to unsigned

Commit e2782f560c29 ("Revert "dm raid: remove unnecessary discard
limits for raid10"") exposed compiler warnings introduced by commit
e0910c8e4f87 ("dm raid: fix discard limits for raid1 and raid10"):

In file included from ./include/linux/kernel.h:14,
                 from ./include/asm-generic/bug.h:20,
                 from ./arch/x86/include/asm/bug.h:93,
                 from ./include/linux/bug.h:5,
                 from ./include/linux/mmdebug.h:5,
                 from ./include/linux/gfp.h:5,
                 from ./include/linux/slab.h:15,
                 from drivers/md/dm-raid.c:8:
drivers/md/dm-raid.c: In function ‘raid_io_hints’:
./include/linux/minmax.h:18:28: warning: comparison of distinct pointer types lacks a cast
  (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
                            ^~
./include/linux/minmax.h:32:4: note: in expansion of macro ‘__typecheck’
   (__typecheck(x, y) && __no_side_effects(x, y))
    ^~~~~~~~~~~
./include/linux/minmax.h:42:24: note: in expansion of macro ‘__safe_cmp’
  __builtin_choose_expr(__safe_cmp(x, y), \
                        ^~~~~~~~~~
./include/linux/minmax.h:51:19: note: in expansion of macro ‘__careful_cmp’
#define min(x, y) __careful_cmp(x, y, <)
                   ^~~~~~~~~~~~~
./include/linux/minmax.h:84:39: note: in expansion of macro ‘min’
  __x == 0 ? __y : ((__y == 0) ? __x : min(__x, __y)); })
                                       ^~~
drivers/md/dm-raid.c:3739:33: note: in expansion of macro ‘min_not_zero’
   limits->max_discard_sectors = min_not_zero(rs->md.chunk_sectors,
                                 ^~~~~~~~~~~~

Fix this by changing the chunk_sectors member of 'struct mddev' from
int to 'unsigned int' to match the type used for the 'chunk_sectors'
member of 'struct queue_limits'.  Various MD code still uses 'int' but
none of it appears to ever make use of signed int; and storing
positive signed int in unsigned is perfectly safe.

Reported-by: Song Liu <songliubraving@fb.com>
Fixes: e2782f560c29 ("Revert "dm raid: remove unnecessary discard limits for raid10"")
Fixes: e0910c8e4f87 ("dm raid: fix discard limits for raid1 and raid10")
Cc: stable@vger,kernel.org # e0910c8e4f87 was marked for stable@
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

x86/kprobes: Fix optprobe to detect INT3 padding correctly

Commit

7705dc855797 ("x86/vmlinux: Use INT3 instead of NOP for linker fill bytes")

changed the padding bytes between functions from NOP to INT3. However,
when optprobe decodes a target function it finds INT3 and gives up the
jump optimization.

Instead of giving up any INT3 detection, check whether the rest of the
bytes to the end of the function are INT3. If all of them are INT3,
those come from the linker. In that case, continue the optprobe jump
optimization.

[ bp: Massage commit message. ]

Fixes: 7705dc855797 ("x86/vmlinux: Use INT3 instead of NOP for linker fill bytes")
Reported-by: Adam Zabrocki <pi3@pi3.com.pl>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/160767025681.3880685.16021570341428835411.stgit@devnote2

Input: goodix - add upside-down quirk for Teclast X98 Pro tablet

The touchscreen on the Teclast x98 Pro is also mounted upside-down in
relation to the display orientation.

Signed-off-by: Simon Beginn <linux@simonmicro.de>
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20201117004253.27A5A27EFD@localhost
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

tools/kvm_stat: Exempt time-based counters

The new counters halt_poll_success_ns and halt_poll_fail_ns do not count
events. Instead they provide a time, and mess up our statistics. Therefore,
we should exclude them.
Removal is currently implemented with an exempt list. If more counters like
these appear, we can think about a more general rule like excluding all
fields name "*_ns", in case that's a standing convention.

Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Tested-and-reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20201208210829.101324-1-raspl@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: mmu: Fix SPTE encoding of MMIO generation upper half

Commit cae7ed3c2cb0 ("KVM: x86: Refactor the MMIO SPTE generation handling")
cleaned up the computation of MMIO generation SPTE masks, however it
introduced a bug how the upper part was encoded:
SPTE bits 52-61 were supposed to contain bits 10-19 of the current
generation number, however a missing shift encoded bits 1-10 there instead
(mostly duplicating the lower part of the encoded generation number that
then consisted of bits 1-9).

In the meantime, the upper part was shrunk by one bit and moved by
subsequent commits to become an upper half of the encoded generation number
(bits 9-17 of bits 0-17 encoded in a SPTE).

In addition to the above, commit 56871d444bc4 ("KVM: x86: fix overlap between SPTE_MMIO_MASK and generation")
has changed the SPTE bit range assigned to encode the generation number and
the total number of bits encoded but did not update them in the comment
attached to their defines, nor in the KVM MMU doc.
Let's do it here, too, since it is too trivial thing to warrant a separate
commit.

Fixes: cae7ed3c2cb0 ("KVM: x86: Refactor the MMIO SPTE generation handling")
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <156700708db2a5296c5ed7a8b9ac71f1e9765c85.1607129096.git.maciej.szmigiero@oracle.com>
Cc: stable@vger.kernel.org
[Reorganize macros so that everything is computed from the bit ranges. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge tag 'mtd/fixes-for-5.10-rc8' of git://git./linux/kernel/git/mtd/linux

Pull mtd fixes from Miquel Raynal:
"Second series of fixes for raw NAND drivers initiated because of a
  rework of the ECC engine subsystem.

  The location of the DT parsing logic got moved, breaking several
  drivers which in fact were not doing the ECC engine initialization at
  the right place.

  These drivers have been fixed by enforcing a particular ECC engine
  type and algorithm, software Hamming, while the algorithm may be
  overwritten by a DT property. This merge request fixes this in the
  xway, socrates, plat_nand, pasemi, orion, mpc5121, gpio, au1550 and
  ams-delta controller drivers"

* tag 'mtd/fixes-for-5.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: rawnand: xway: Do not force a particular software ECC engine
  mtd: rawnand: socrates: Do not force a particular software ECC engine
  mtd: rawnand: plat_nand: Do not force a particular software ECC engine
  mtd: rawnand: pasemi: Do not force a particular software ECC engine
  mtd: rawnand: orion: Do not force a particular software ECC engine
  mtd: rawnand: mpc5121: Do not force a particular software ECC engine
  mtd: rawnand: gpio: Do not force a particular software ECC engine
  mtd: rawnand: au1550: Do not force a particular software ECC engine
  mtd: rawnand: ams-delta: Do not force a particular software ECC engine

Merge tag 'mmc-v5.10-rc4-2' of git://git./linux/kernel/git/ulfh/mmc

Pull MMC fixes from Ulf Hansson:
"A couple of MMC fixes:

  MMC core:
   - Fixup condition for CMD13 polling for RPMB requests

  MMC host:
   - mtk-sd: Fix system suspend/resume support for CQHCI
   - mtd-sd: Extend SDIO IRQ fix to more variants
   - sdhci-of-arasan: Fix clock registration error for Keem Bay SOC
   - tmio: Bring HW to a sane state after a power off"

* tag 'mmc-v5.10-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: mediatek: mark PM functions as __maybe_unused
  mmc: block: Fixup condition for CMD13 polling for RPMB requests
  mmc: tmio: improve bringing HW to a sane state with MMC_POWER_OFF
  mmc: sdhci-of-arasan: Fix clock registration error for Keem Bay SOC
  mmc: mediatek: Extend recheck_sdio_irq fix to more variants
  mmc: mediatek: Fix system suspend/resume support for CQHCI

Merge tag 'at24-fixes-for-v5.10' of git://git./linux/kernel/git/brgl/linux into i2c/for-current

at24 fixes for v5.10

- fix NVMEM name with custom AT24 device name

Merge tag 'zonefs-5.10-rc7' of git://git./linux/kernel/git/dlemoal/zonefs

Pull zonefs fix from Damien Le Moal:
"A single patch in this pull request to fix a BIO and page reference
leak when writing sequential zone files"

* tag 'zonefs-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: fix page reference and BIO leak

bpf: Fix enum names for bpf_this_cpu_ptr() and bpf_per_cpu_ptr() helpers

Remove bpf_ prefix, which causes these helpers to be reported in verifier
dump as bpf_bpf_this_cpu_ptr() and bpf_bpf_per_cpu_ptr(), respectively. Lets
fix it as long as it is still possible before UAPI freezes on these helpers.

Fixes: eaa6bcb71ef6 ("bpf: Introduce bpf_per_cpu_ptr()")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
"8 patches.

  Subsystems affected by this patch series: proc, selftests, kbuild, and
  mm (pagecache, kasan, hugetlb)"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm/hugetlb: clear compound_nr before freeing gigantic pages
  kasan: fix object remaining in offline per-cpu quarantine
  elfcore: fix building with clang
  initramfs: fix clang build failure
  kbuild: avoid static_assert for genksyms
  selftest/fpu: avoid clang warning
  proc: use untagged_addr() for pagemap_read addresses
  revert "mm/filemap: add static for function __add_to_page_cache_locked"

mm/hugetlb: clear compound_nr before freeing gigantic pages

Commit 1378a5ee451a ("mm: store compound_nr as well as compound_order")
added compound_nr counter to first tail struct page, overlaying with
page->mapping.  The overlay itself is fine, but while freeing gigantic
hugepages via free_contig_range(), a "bad page" check will trigger for
non-NULL page->mapping on the first tail page:

  BUG: Bad page state in process bash  pfn:380001
  page:00000000c35f0856 refcount:0 mapcount:0 mapping:00000000126b68aa index:0x0 pfn:0x380001
  aops:0x0
  flags: 0x3ffff00000000000()
  raw: 3ffff00000000000 0000000000000100 0000000000000122 0000000100000000
  raw: 0000000000000000 0000000000000000 ffffffff00000000 0000000000000000
  page dumped because: non-NULL mapping
  Modules linked in:
  CPU: 6 PID: 616 Comm: bash Not tainted 5.10.0-rc7-next-20201208 #1
  Hardware name: IBM 3906 M03 703 (LPAR)
  Call Trace:
    show_stack+0x6e/0xe8
    dump_stack+0x90/0xc8
    bad_page+0xd6/0x130
    free_pcppages_bulk+0x26a/0x800
    free_unref_page+0x6e/0x90
    free_contig_range+0x94/0xe8
    update_and_free_page+0x1c4/0x2c8
    free_pool_huge_page+0x11e/0x138
    set_max_huge_pages+0x228/0x300
    nr_hugepages_store_common+0xb8/0x130
    kernfs_fop_write+0xd2/0x218
    vfs_write+0xb0/0x2b8
    ksys_write+0xac/0xe0
    system_call+0xe6/0x288
  Disabling lock debugging due to kernel taint

This is because only the compound_order is cleared in
destroy_compound_gigantic_page(), and compound_nr is set to
1U << order == 1 for order 0 in set_compound_order(page, 0).

Fix this by explicitly clearing compound_nr for first tail page after
calling set_compound_order(page, 0).

Link: https://lkml.kernel.org/r/20201208182813.66391-2-gerald.schaefer@linux.ibm.com
Fixes: 1378a5ee451a ("mm: store compound_nr as well as compound_order")
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: <stable@vger.kernel.org> [5.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: fix object remaining in offline per-cpu quarantine

We hit this issue in our internal test.  When enabling generic kasan, a
kfree()'d object is put into per-cpu quarantine first.  If the cpu goes
offline, object still remains in the per-cpu quarantine.  If we call
kmem_cache_destroy() now, slub will report "Objects remaining" error.

  =============================================================================
  BUG test_module_slab (Not tainted): Objects remaining in test_module_slab on __kmem_cache_shutdown()
  -----------------------------------------------------------------------------

  Disabling lock debugging due to kernel taint
  INFO: Slab 0x(____ptrval____) objects=34 used=1 fp=0x(____ptrval____) flags=0x2ffff00000010200
  CPU: 3 PID: 176 Comm: cat Tainted: G    B             5.10.0-rc1-00007-g4525c8781ec0-dirty #10
  Hardware name: linux,dummy-virt (DT)
  Call trace:
     dump_backtrace+0x0/0x2b0
     show_stack+0x18/0x68
     dump_stack+0xfc/0x168
     slab_err+0xac/0xd4
     __kmem_cache_shutdown+0x1e4/0x3c8
     kmem_cache_destroy+0x68/0x130
     test_version_show+0x84/0xf0
     module_attr_show+0x40/0x60
     sysfs_kf_seq_show+0x128/0x1c0
     kernfs_seq_show+0xa0/0xb8
     seq_read+0x1f0/0x7e8
     kernfs_fop_read+0x70/0x338
     vfs_read+0xe4/0x250
     ksys_read+0xc8/0x180
     __arm64_sys_read+0x44/0x58
     el0_svc_common.constprop.0+0xac/0x228
     do_el0_svc+0x38/0xa0
     el0_sync_handler+0x170/0x178
     el0_sync+0x174/0x180
  INFO: Object 0x(____ptrval____) @offset=15848
  INFO: Allocated in test_version_show+0x98/0xf0 age=8188 cpu=6 pid=172
     stack_trace_save+0x9c/0xd0
     set_track+0x64/0xf0
     alloc_debug_processing+0x104/0x1a0
     ___slab_alloc+0x628/0x648
     __slab_alloc.isra.0+0x2c/0x58
     kmem_cache_alloc+0x560/0x588
     test_version_show+0x98/0xf0
     module_attr_show+0x40/0x60
     sysfs_kf_seq_show+0x128/0x1c0
     kernfs_seq_show+0xa0/0xb8
     seq_read+0x1f0/0x7e8
     kernfs_fop_read+0x70/0x338
     vfs_read+0xe4/0x250
     ksys_read+0xc8/0x180
     __arm64_sys_read+0x44/0x58
     el0_svc_common.constprop.0+0xac/0x228
  kmem_cache_destroy test_module_slab: Slab cache still has objects

Register a cpu hotplug function to remove all objects in the offline
per-cpu quarantine when cpu is going offline.  Set a per-cpu variable to
indicate this cpu is offline.

[qiang.zhang@windriver.com: fix slab double free when cpu-hotplug]
Link: https://lkml.kernel.org/r/20201204102206.20237-1-qiang.zhang@windriver.com
Link: https://lkml.kernel.org/r/1606895585-17382-2-git-send-email-Kuan-Ying.Lee@mediatek.com
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Signed-off-by: Zqiang <qiang.zhang@windriver.com>
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: Guangye Yang <guangye.yang@mediatek.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Nicholas Tang <nicholas.tang@mediatek.com>
Cc: Miles Chen <miles.chen@mediatek.com>
Cc: Qian Cai <qcai@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

elfcore: fix building with clang

kernel/elfcore.c only contains weak symbols, which triggers a bug with
clang in combination with recordmcount:

  Cannot find symbol for section 2: .text.
  kernel/elfcore.o: failed

Move the empty stubs into linux/elfcore.h as inline functions.  As only
two architectures use these, just use the architecture specific Kconfig
symbols to key off the declaration.

Link: https://lkml.kernel.org/r/20201204165742.3815221-2-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Barret Rhoden <brho@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

initramfs: fix clang build failure

There is only one function in init/initramfs.c that is in the .text
section, and it is marked __weak.  When building with clang-12 and the
integrated assembler, this leads to a bug with recordmcount:

  ./scripts/recordmcount  "init/initramfs.o"
  Cannot find symbol for section 2: .text.
  init/initramfs.o: failed

I'm not quite sure what exactly goes wrong, but I notice that this
function is only ever called from an __init function, and normally
inlined.  Marking it __init as well is clearly correct and it leads to
recordmcount no longer complaining.

Link: https://lkml.kernel.org/r/20201204165742.3815221-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Barret Rhoden <brho@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kbuild: avoid static_assert for genksyms

genksyms does not know or care about the _Static_assert() built-in, and
sometimes falls back to ignoring the later symbols, which causes
undefined behavior such as

  WARNING: modpost: EXPORT symbol "ethtool_set_ethtool_phy_ops" [vmlinux] version generation failed, symbol will not be versioned.
  ld: net/ethtool/common.o: relocation R_AARCH64_ABS32 against `__crc_ethtool_set_ethtool_phy_ops' can not be used when making a shared object
  net/ethtool/common.o:(_ftrace_annotated_branch+0x0): dangerous relocation: unsupported relocation

Redefine static_assert for genksyms to avoid that.

Link: https://lkml.kernel.org/r/20201203230955.1482058-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Cc: Marco Elver <elver@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

selftest/fpu: avoid clang warning

With extra warnings enabled, clang complains about the redundant
-mhard-float argument:

clang: error: argument unused during compilation: '-mhard-float' [-Werror,-Wunused-command-line-argument]

Move this into the gcc-only part of the Makefile.

Link: https://lkml.kernel.org/r/20201203223652.1320700-1-arnd@kernel.org
Fixes: 4185b3b92792 ("selftests/fpu: Add an FPU selftest")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Petteri Aimonen <jpa@git.mail.kapsi.fi>
Cc: Borislav Petkov <bp@suse.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

proc: use untagged_addr() for pagemap_read addresses

When we try to visit the pagemap of a tagged userspace pointer, we find
that the start_vaddr is not correct because of the tag.
To fix it, we should untag the userspace pointers in pagemap_read().

I tested with 5.10-rc4 and the issue remains.

Explanation from Catalin in [1]:

"Arguably, that's a user-space bug since tagged file offsets were never
  supported. In this case it's not even a tag at bit 56 as per the arm64
  tagged address ABI but rather down to bit 47. You could say that the
  problem is caused by the C library (malloc()) or whoever created the
  tagged vaddr and passed it to this function. It's not a kernel
  regression as we've never supported it.

  Now, pagemap is a special case where the offset is usually not
  generated as a classic file offset but rather derived by shifting a
  user virtual address. I guess we can make a concession for pagemap
  (only) and allow such offset with the tag at bit (56 - PAGE_SHIFT + 3)"

My test code is based on [2]:

A userspace pointer which has been tagged by 0xb4: 0xb400007662f541c8

userspace program:

  uint64 OsLayer::VirtualToPhysical(void *vaddr) {
uint64 frame, paddr, pfnmask, pagemask;
int pagesize = sysconf(_SC_PAGESIZE);
off64_t off = ((uintptr_t)vaddr) / pagesize * 8; // off = 0xb400007662f541c8 / pagesize * 8 = 0x5a00003b317aa0
int fd = open(kPagemapPath, O_RDONLY);
...

if (lseek64(fd, off, SEEK_SET) != off || read(fd, &frame, 8) != 8) {
int err = errno;
string errtxt = ErrorString(err);
if (fd >= 0)
close(fd);
return 0;
}
  ...
  }

kernel fs/proc/task_mmu.c:

  static ssize_t pagemap_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
  {
...
src = *ppos;
svpfn = src / PM_ENTRY_BYTES; // svpfn == 0xb400007662f54
start_vaddr = svpfn << PAGE_SHIFT; // start_vaddr == 0xb400007662f54000
end_vaddr = mm->task_size;

/* watch out for wraparound */
// svpfn == 0xb400007662f54
// (mm->task_size >> PAGE) == 0x8000000
if (svpfn > mm->task_size >> PAGE_SHIFT) // the condition is true because of the tag 0xb4
start_vaddr = end_vaddr;

ret = 0;
while (count && (start_vaddr < end_vaddr)) { // we cannot visit correct entry because start_vaddr is set to end_vaddr
int len;
unsigned long end;
...
}
...
  }

[1] https://lore.kernel.org/patchwork/patch/1343258/
[2] https://github.com/stressapptest/stressapptest/blob/master/src/os.cc#L158

Link: https://lkml.kernel.org/r/20201204024347.8295-1-miles.chen@mediatek.com
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Song Bao Hua (Barry Song) <song.bao.hua@hisilicon.com>
Cc: <stable@vger.kernel.org> [5.4-]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

revert "mm/filemap: add static for function __add_to_page_cache_locked"

Revert commit 3351b16af494 ("mm/filemap: add static for function
__add_to_page_cache_locked") due to incompatibility with
ALLOW_ERROR_INJECTION which result in build errors.

Link: https://lkml.kernel.org/r/CAADnVQJ6tmzBXvtroBuEH6QA0H+q7yaSKxrVvVxhqr3KBZdEXg@mail.gmail.com
Tested-by: Justin Forbes <jmforbes@linuxtx.org>
Tested-by: Greg Thelen <gthelen@google.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Michal Kubecek <mkubecek@suse.cz>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Tony Luck <tony.luck@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Input: cm109 - do not stomp on control URB

We need to make sure we are not stomping on the control URB that was
issued when opening the device when attempting to toggle buzzer.
To do that we need to mark it as pending in cm109_open().

Reported-and-tested-by: syzbot+150f793ac5bc18eee150@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

mtd: rawnand: xway: Do not force a particular software ECC engine

Originally, commit d7157ff49a5b ("mtd: rawnand: Use the ECC framework
user input parsing bits") kind of broke the logic around the
initialization of several ECC engines.

Unfortunately, the fix (which indeed moved the ECC initialization to
the right place) did not take into account the fact that a different
ECC algorithm could have been used thanks to a DT property,
considering the "Hamming" algorithm entry a configuration while it was
only a default.

Add the necessary logic to be sure Hamming keeps being only a default.

Fixes: d525914b5bd8 ("mtd: rawnand: xway: Move the ECC initialization to ->attach_chip()")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20201203190340.15522-10-miquel.raynal@bootlin.com

mtd: rawnand: socrates: Do not force a particular software ECC engine

Originally, commit d7157ff49a5b ("mtd: rawnand: Use the ECC framework
user input parsing bits") kind of broke the logic around the
initialization of several ECC engines.

Unfortunately, the fix (which indeed moved the ECC initialization to
the right place) did not take into account the fact that a different
ECC algorithm could have been used thanks to a DT property,
considering the "Hamming" algorithm entry a configuration while it was
only a default.

Add the necessary logic to be sure Hamming keeps being only a default.

Fixes: b36bf0a0fe5d ("mtd: rawnand: socrates: Move the ECC initialization to ->attach_chip()")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20201203190340.15522-9-miquel.raynal@bootlin.com

mtd: rawnand: plat_nand: Do not force a particular software ECC engine

Originally, commit d7157ff49a5b ("mtd: rawnand: Use the ECC framework
user input parsing bits") kind of broke the logic around the
initialization of several ECC engines.

Unfortunately, the fix (which indeed moved the ECC initialization to
the right place) did not take into account the fact that a different
ECC algorithm could have been used thanks to a DT property,
considering the "Hamming" algorithm entry a configuration while it was
only a default.

Add the necessary logic to be sure Hamming keeps being only a default.

Fixes: 612e048e6aab ("mtd: rawnand: plat_nand: Move the ECC initialization to ->attach_chip()")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20201203190340.15522-8-miquel.raynal@bootlin.com

mtd: rawnand: pasemi: Do not force a particular software ECC engine

Originally, commit d7157ff49a5b ("mtd: rawnand: Use the ECC framework
user input parsing bits") kind of broke the logic around the
initialization of several ECC engines.

Unfortunately, the fix (which indeed moved the ECC initialization to
the right place) did not take into account the fact that a different
ECC algorithm could have been used thanks to a DT property,
considering the "Hamming" algorithm entry a configuration while it was
only a default.

Add the necessary logic to be sure Hamming keeps being only a default.

Fixes: 8fc6f1f042b2 ("mtd: rawnand: pasemi: Move the ECC initialization to ->attach_chip()")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20201203190340.15522-7-miquel.raynal@bootlin.com

mtd: rawnand: orion: Do not force a particular software ECC engine

Originally, commit d7157ff49a5b ("mtd: rawnand: Use the ECC framework
user input parsing bits") kind of broke the logic around the
initialization of several ECC engines.

Unfortunately, the fix (which indeed moved the ECC initialization to
the right place) did not take into account the fact that a different
ECC algorithm could have been used thanks to a DT property,
considering the "Hamming" algorithm entry a configuration while it was
only a default.

Add the necessary logic to be sure Hamming keeps being only a default.

Reported-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Fixes: 553508cec2e8 ("mtd: rawnand: orion: Move the ECC initialization to ->attach_chip()")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Link: https://lore.kernel.org/linux-mtd/20201203190340.15522-6-miquel.raynal@bootlin.com

mtd: rawnand: mpc5121: Do not force a particular software ECC engine

Originally, commit d7157ff49a5b ("mtd: rawnand: Use the ECC framework
user input parsing bits") kind of broke the logic around the
initialization of several ECC engines.

Unfortunately, the fix (which indeed moved the ECC initialization to
the right place) did not take into account the fact that a different
ECC algorithm could have been used thanks to a DT property,
considering the "Hamming" algorithm entry a configuration while it was
only a default.

Add the necessary logic to be sure Hamming keeps being only a default.

Fixes: 6dd09f775b72 ("mtd: rawnand: mpc5121: Move the ECC initialization to ->attach_chip()")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20201203190340.15522-5-miquel.raynal@bootlin.com

mtd: rawnand: gpio: Do not force a particular software ECC engine

Originally, commit d7157ff49a5b ("mtd: rawnand: Use the ECC framework
user input parsing bits") kind of broke the logic around the
initialization of several ECC engines.

Unfortunately, the fix (which indeed moved the ECC initialization to
the right place) did not take into account the fact that a different
ECC algorithm could have been used thanks to a DT property,
considering the "Hamming" algorithm entry a configuration while it was
only a default.

Add the necessary logic to be sure Hamming keeps being only a default.

Fixes: f6341f6448e0 ("mtd: rawnand: gpio: Move the ECC initialization to ->attach_chip()")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20201203190340.15522-4-miquel.raynal@bootlin.com

mtd: rawnand: au1550: Do not force a particular software ECC engine

Originally, commit d7157ff49a5b ("mtd: rawnand: Use the ECC framework
user input parsing bits") kind of broke the logic around the
initialization of several ECC engines.

Unfortunately, the fix (which indeed moved the ECC initialization to
the right place) did not take into account the fact that a different
ECC algorithm could have been used thanks to a DT property,
considering the "Hamming" algorithm entry a configuration while it was
only a default.

Add the necessary logic to be sure Hamming keeps being only a default.

Fixes: dbffc8ccdf3a ("mtd: rawnand: au1550: Move the ECC initialization to ->attach_chip()")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20201203190340.15522-3-miquel.raynal@bootlin.com

mtd: rawnand: ams-delta: Do not force a particular software ECC engine

Originally, commit d7157ff49a5b ("mtd: rawnand: Use the ECC framework
user input parsing bits") kind of broke the logic around the
initialization of several ECC engines.

Unfortunately, the fix (which indeed moved the ECC initialization to
the right place) did not take into account the fact that a different
ECC algorithm could have been used thanks to a DT property,
considering the "Hamming" algorithm entry a configuration while it was
only a default.

Add the necessary logic to be sure Hamming keeps being only a default.

Fixes: 59d93473323a ("mtd: rawnand: ams-delta: Move the ECC initialization to ->attach_chip()")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20201203190340.15522-2-miquel.raynal@bootlin.com

Merge tag 'pinctrl-v5.10-3' of git://git./linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:
"Here is a late set of pin control fixes for v5.10, most concern some
  minor and major issues found in the Intel drivers. Some are so hairy
  that I have no idea what is going on there, but luckily the maintainer
  knows what's up.

  We also have an interesting fix for AMD, which makes AMD-based laptops
  more stable IIUC.

  Summary:

   - Fix up some SPI group and a register offset on Intel Jasperlake

   - Set default bias on Intel Merrifield

   - Preserve debouncing on Intel Baytrail

   - Stop .set_type() irqchip callback in the AMD driver from fiddling
     with the debounce filter

   - Fix access to GPIO banks that are pass-thru on the Aspeed

   - Fix a fix for the Intel pin control driver to disable Rx/Tx when
     requesting a UART line as GPIO"

* tag 'pinctrl-v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: intel: Actually disable Tx and Rx buffers on GPIO request
  pinctrl: aspeed: Fix GPIO requests on pass-through banks
  pinctrl: amd: remove debounce filter setting in IRQ type setting
  pinctrl: baytrail: Avoid clearing debounce value when turning it off
  pinctrl: merrifield: Set default bias in case no particular value given
  pinctrl: jasperlake: Fix HOSTSW_OWN offset
  pinctrl: jasperlake: Unhide SPI group of pins

Merge tag 'v5.10-3' of git://git./linux/kernel/git/linusw/linux-gpio

Pull GPIO fixes from Linus Walleij:
"These are hopefully the last GPIO fixes for this cycle.

  All are driver fixes except a small resource leak for pin ranges in
  the gpiolib. Two are PM related, which is nice because when developers
  start to find PM bugs it is usually because they have smoked out the
  bugs of more severe nature.

  Summary:

   - Fix runtime PM balancing on the errorpath of the Arizona driver

   - Fix a suspend NULL pointer reference in the dwapb driver

   - Balance free:ing in gpiochip_generic_free()

   - Fix runtime PM balancing on the errorpath of the zynq driver

   - Fix irqdomain use-after-free in the mvebu driver

   - Break an eternal loop in the spreadtrum EIC driver"

* tag 'v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: eic-sprd: break loop when getting NULL device resource
  gpio: mvebu: fix potential user-after-free on probe
  gpio: zynq: fix reference leak in zynq_gpio functions
  gpiolib: Don't free if pin ranges are not defined
  gpio: dwapb: fix NULL pointer dereference at dwapb_gpio_suspend()
  gpio: arizona: disable pm_runtime in case of failure

Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux

Pull clk fixes from Stephen Boyd:
"Two small clk driver build fixes

   - Remove __packed from a Renesas struct to improve portability

   - Fix a linking problem with i.MX when config options don't agree"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: renesas: r9a06g032: Drop __packed for portability
  clk: imx: scu: fix MXC_CLK_SCU module build break

drm/vkms: Unset preferred_depth

There's a confusion between the preferred_depth uapi and the generic
fbdev helpers. Former wants depth, latter wants bpp, and for XRGB8888
they don't match. Which hit me with vkms, which wants that.

All other drivers setting this and using the generic fbdev helpers use
16, where both numbers match, for RGB565.

Since fixing this is a bit involved (I think for atomic drivers we
should just compute this all internally from the format list of the
first primary plane) paper over the issue in vkms by using defaults
everywhere. Then userspace will pick XRGB8888, and fbdev helpers will
do the same, and we have what we want.

Reported-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Simon Ser <contact@emersion.fr>
Cc: Simon Ser <contact@emersion.fr>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Melissa Wen <melissa.srw@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201211161113.3350061-1-daniel.vetter@ffwll.ch

dma-buf: Fix kerneldoc formatting

I wanted to look up something and noticed the hyperlink doesn't work.
While fixing that also noticed a trivial kerneldoc comment typo in the
same section, fix that too.

Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201204200242.2671481-1-daniel.vetter@ffwll.ch

Revert "scsi: storvsc: Validate length of incoming packet in storvsc_on_channel_callback()"

This reverts commit 3b8c72d076c42bf27284cda7b2b2b522810686f8.

Dexuan reported a regression where StorVSC fails to probe a device (and
where, consequently, the VM may fail to boot). The root-cause analysis led
to a long-standing race condition that is exposed by the validation /commit
in question. Let's put the new validation aside until a proper solution
for that race condition is in place.

Link: https://lore.kernel.org/r/20201211131404.21359-1-parri.andrea@gmail.com
Fixes: 3b8c72d076c4 ("scsi: storvsc: Validate length of incoming packet in storvsc_on_channel_callback()")
Cc: Dexuan Cui <decui@microsoft.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drm/ast: Only map cursor BOs during updates

The HW cursor's BO used to be mapped permanently into the kernel's
address space. GEM's vmap operation will be protected by locks, and
we don't want to lock the BO's for an indefinate period of time.

Change the cursor code to map the HW BOs only during updates. The
vmap operation in VRAM helpers is cheap, as a once estabished mapping
is being reused until the BO actually moves. As the HW cursor BOs are
permanently pinned, they never move at all.

v2:
* fix typos in commit description

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201209142527.26415-3-tzimmermann@suse.de

drm/ast: Don't pin cursor source BO explicitly during update

Vmapping the cursor source BO contains an implicit pin operation,
so there's no need to do this manually.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201209142527.26415-2-tzimmermann@suse.de

Merge tag 'drm-fixes-2020-12-11' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"Last week of fixes, just amdgpu and i915 collections. We had a i915
  regression reported by HJ Lu reported this morning, and this contains
  a fix for that he has tested.

  There are a fair few other fixes, but they are spread across the two
  drivers, and all fairly self contained.

  amdgpu:
   - Fan fix for CI asics
   - Fix a warning in possible_crtcs
   - Build fix for when debugfs is disabled
   - Display overflow fix
   - Display watermark fixes for Renoir
   - SDMA 5.2 fix
   - Stolen vga memory regression fix
   - Power profile fixes
   - Fix a regression from removal of GEM and PRIME callbacks

  amdkfd:
   - Fix a memory leak in dmabuf import

  i915:
   - rc7 regression fix for modesetting
   - vdsc/dp slice fixes
   - gen9 mocs entries fix
   - preemption timeout fix
   - unsigned compare against 0 fix
   - selftest fix
   - submission error propogatig fix
   - request flow suspend fix"

* tag 'drm-fixes-2020-12-11' of git://anongit.freedesktop.org/drm/drm:
  drm/i915/display: Go softly softly on initial modeset failure
  drm/amd/pm: typo fix (CUSTOM -> COMPUTE)
  drm/amdgpu: Initialise drm_gem_object_funcs for imported BOs
  drm/amdgpu: fix size calculation with stolen vga memory
  drm/amd/pm: update smu10.h WORKLOAD_PPLIB setting for raven
  drm/amdkfd: Fix leak in dmabuf import
  drm/amdgpu: fix sdma instance fw version and feature version init
  drm/amd/display: Add wm table for Renoir
  drm/amd/display: Prevent bandwidth overflow
  drm/amdgpu: fix debugfs creation/removal, again
  drm/amdgpu/disply: set num_crtc earlier
  drm/amdgpu/powerplay: parse fan table for CI asics
  drm/i915/gt: Declare gen9 has 64 mocs entries!
  drm/i915/display/dp: Compute the correct slice count for VDSC on DP
  drm/i915: fix size_t greater or equal to zero comparison
  drm/i915/gt: Cancel the preemption timeout on responding to it
  drm/i915/gt: Ignore repeated attempts to suspend request flow across reset
  drm/i915/gem: Propagate error from cancelled submit due to context closure
  drm/i915/gem: Check the correct variable in selftest

RISC-V: Define get_cycles64() regardless of M-mode

The timer driver uses get_cycles64() unconditionally to obtain the current
time. A recent refactoring lost the common definition for some configs, which
is now the only one we need.

Fixes: d5be89a8d118 ("RISC-V: Resurrect the MMIO timer implementation for M-mode systems")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Merge tag 'ktest-v5.10-rc6' of git://git./linux/kernel/git/rostedt/linux-ktest

Pull ktest fix from Steven Rostedt:
"Fix issues with grub2bls in ktest.pl

  ktest.pl did not know about grub2bls that was introduced in Fedora 30,
  and now it does"

* tag 'ktest-v5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest.pl: Fix incorrect reboot for grub2bls

Merge tag 'powerpc-5.10-6' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fix from Michael Ellerman:
"One commit to implement copy_from_kernel_nofault_allowed(), otherwise
  copy_from_kernel_nofault() can trigger warnings when accessing bad
  addresses in some configurations.

  Thanks to Christophe Leroy and Qian Cai"

* tag 'powerpc-5.10-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/mm: Fix KUAP warning by providing copy_from_kernel_nofault_allowed()

Merge tag 'fixes-v5.10a' of git://git./linux/kernel/git/jmorris/linux-security

Pull namespaced fscaps fix from James Morris:
"Fix namespaced fscaps when !CONFIG_SECURITY (Serge Hallyn)"

* tag 'fixes-v5.10a' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
[SECURITY] fix namespaced fscaps when !CONFIG_SECURITY

drm/i915/display: Go softly softly on initial modeset failure

Reduce the module/device probe error into a mere debug to hide issues
where the initial modeset is failing (after lies told by hw probe) and
the system hangs with a livelock in cleaning up the failed commit.

Reported-by: H.J. Lu <hjl.tools@gmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=210619
Fixes: b3bf99daaee9 ("drm/i915/display: Defer initial modeset until after GGTT is initialised")
Fixes: ccc9e67ab26f ("drm/i915/display: Defer initial modeset until after GGTT is initialised")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: H.J. Lu <hjl.tools@gmail.com>
Cc: Dave Airlie <airlied@redhat.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201210230741.17140-1-chris@chris-wilson.co.uk

Merge tag 'drm-intel-fixes-2020-12-09' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

Fixes for VDSC/DP, selftests, shmem_utils, preemption, submission, and gt reset:

- Check the correct variable in selftest (Dan)
- Propagate error from canceled submit due to context closure (Chris)
- Ignore repeated attempts to suspend request flow across reset (Chris)
- Cancel the preemption timeout on responding to it (Chris)
- Fix unsigned compared against 0 (Colin)
- Compute the correct slice count for VDSC on DP (Manasi)
- Declar gen9 has 64 mocs entries (Chris)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201209235010.GA10554@intel.com

Merge tag 'amd-drm-fixes-5.10-2020-12-09' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

amd-drm-fixes-5.10-2020-12-09:

amdgpu:
- Fan fix for CI asics
- Fix a warning in possible_crtcs
- Build fix for when debugfs is disabled
- Display overflow fix
- Display watermark fixes for Renoir
- SDMA 5.2 fix
- Stolen vga memory regression fix
- Power profile fixes
- Fix a regression from removal of GEM and PRIME callbacks

amdkfd:
- Fix a memory leak in dmabuf import

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201210034848.18108-1-alexander.deucher@amd.com